| /* |
| * Copyright (C) 2003 ATI Inc. <hyu@ati.com> |
| * Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/ide.h> |
| #include <linux/init.h> |
| |
| #define DRV_NAME "atiixp" |
| |
| #define ATIIXP_IDE_PIO_TIMING 0x40 |
| #define ATIIXP_IDE_MDMA_TIMING 0x44 |
| #define ATIIXP_IDE_PIO_CONTROL 0x48 |
| #define ATIIXP_IDE_PIO_MODE 0x4a |
| #define ATIIXP_IDE_UDMA_CONTROL 0x54 |
| #define ATIIXP_IDE_UDMA_MODE 0x56 |
| |
| typedef struct { |
| u8 command_width; |
| u8 recover_width; |
| } atiixp_ide_timing; |
| |
| static atiixp_ide_timing pio_timing[] = { |
| { 0x05, 0x0d }, |
| { 0x04, 0x07 }, |
| { 0x03, 0x04 }, |
| { 0x02, 0x02 }, |
| { 0x02, 0x00 }, |
| }; |
| |
| static atiixp_ide_timing mdma_timing[] = { |
| { 0x07, 0x07 }, |
| { 0x02, 0x01 }, |
| { 0x02, 0x00 }, |
| }; |
| |
| static DEFINE_SPINLOCK(atiixp_lock); |
| |
| /** |
| * atiixp_set_pio_mode - set host controller for PIO mode |
| * @drive: drive |
| * @pio: PIO mode number |
| * |
| * Set the interface PIO mode. |
| */ |
| |
| static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) |
| { |
| struct pci_dev *dev = to_pci_dev(drive->hwif->dev); |
| unsigned long flags; |
| int timing_shift = (drive->dn ^ 1) * 8; |
| u32 pio_timing_data; |
| u16 pio_mode_data; |
| |
| spin_lock_irqsave(&atiixp_lock, flags); |
| |
| pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data); |
| pio_mode_data &= ~(0x07 << (drive->dn * 4)); |
| pio_mode_data |= (pio << (drive->dn * 4)); |
| pci_write_config_word(dev, ATIIXP_IDE_PIO_MODE, pio_mode_data); |
| |
| pci_read_config_dword(dev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data); |
| pio_timing_data &= ~(0xff << timing_shift); |
| pio_timing_data |= (pio_timing[pio].recover_width << timing_shift) | |
| (pio_timing[pio].command_width << (timing_shift + 4)); |
| pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data); |
| |
| spin_unlock_irqrestore(&atiixp_lock, flags); |
| } |
| |
| /** |
| * atiixp_set_dma_mode - set host controller for DMA mode |
| * @drive: drive |
| * @speed: DMA mode |
| * |
| * Set a ATIIXP host controller to the desired DMA mode. This involves |
| * programming the right timing data into the PCI configuration space. |
| */ |
| |
| static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) |
| { |
| struct pci_dev *dev = to_pci_dev(drive->hwif->dev); |
| unsigned long flags; |
| int timing_shift = (drive->dn ^ 1) * 8; |
| u32 tmp32; |
| u16 tmp16; |
| u16 udma_ctl = 0; |
| |
| spin_lock_irqsave(&atiixp_lock, flags); |
| |
| pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &udma_ctl); |
| |
| if (speed >= XFER_UDMA_0) { |
| pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16); |
| tmp16 &= ~(0x07 << (drive->dn * 4)); |
| tmp16 |= ((speed & 0x07) << (drive->dn * 4)); |
| pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16); |
| |
| udma_ctl |= (1 << drive->dn); |
| } else if (speed >= XFER_MW_DMA_0) { |
| u8 i = speed & 0x03; |
| |
| pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32); |
| tmp32 &= ~(0xff << timing_shift); |
| tmp32 |= (mdma_timing[i].recover_width << timing_shift) | |
| (mdma_timing[i].command_width << (timing_shift + 4)); |
| pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32); |
| |
| udma_ctl &= ~(1 << drive->dn); |
| } |
| |
| pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, udma_ctl); |
| |
| spin_unlock_irqrestore(&atiixp_lock, flags); |
| } |
| |
| static u8 atiixp_cable_detect(ide_hwif_t *hwif) |
| { |
| struct pci_dev *pdev = to_pci_dev(hwif->dev); |
| u8 udma_mode = 0, ch = hwif->channel; |
| |
| pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode); |
| |
| if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40) |
| return ATA_CBL_PATA80; |
| else |
| return ATA_CBL_PATA40; |
| } |
| |
| static const struct ide_port_ops atiixp_port_ops = { |
| .set_pio_mode = atiixp_set_pio_mode, |
| .set_dma_mode = atiixp_set_dma_mode, |
| .cable_detect = atiixp_cable_detect, |
| }; |
| |
| static const struct ide_port_info atiixp_pci_info[] __devinitdata = { |
| { /* 0: IXP200/300/400/700 */ |
| .name = DRV_NAME, |
| .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}}, |
| .port_ops = &atiixp_port_ops, |
| .pio_mask = ATA_PIO4, |
| .mwdma_mask = ATA_MWDMA2, |
| .udma_mask = ATA_UDMA5, |
| }, |
| { /* 1: IXP600 */ |
| .name = DRV_NAME, |
| .enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}}, |
| .port_ops = &atiixp_port_ops, |
| .host_flags = IDE_HFLAG_SINGLE, |
| .pio_mask = ATA_PIO4, |
| .mwdma_mask = ATA_MWDMA2, |
| .udma_mask = ATA_UDMA5, |
| }, |
| }; |
| |
| /** |
| * atiixp_init_one - called when a ATIIXP is found |
| * @dev: the atiixp device |
| * @id: the matching pci id |
| * |
| * Called when the PCI registration layer (or the IDE initialization) |
| * finds a device matching our IDE device tables. |
| */ |
| |
| static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| return ide_pci_init_one(dev, &atiixp_pci_info[id->driver_data], NULL); |
| } |
| |
| static const struct pci_device_id atiixp_pci_tbl[] = { |
| { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), 0 }, |
| { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), 0 }, |
| { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 }, |
| { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 }, |
| { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 }, |
| { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), 0 }, |
| { 0, }, |
| }; |
| MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl); |
| |
| static struct pci_driver atiixp_pci_driver = { |
| .name = "ATIIXP_IDE", |
| .id_table = atiixp_pci_tbl, |
| .probe = atiixp_init_one, |
| .remove = ide_pci_remove, |
| .suspend = ide_pci_suspend, |
| .resume = ide_pci_resume, |
| }; |
| |
| static int __init atiixp_ide_init(void) |
| { |
| return ide_pci_register_driver(&atiixp_pci_driver); |
| } |
| |
| static void __exit atiixp_ide_exit(void) |
| { |
| pci_unregister_driver(&atiixp_pci_driver); |
| } |
| |
| module_init(atiixp_ide_init); |
| module_exit(atiixp_ide_exit); |
| |
| MODULE_AUTHOR("HUI YU"); |
| MODULE_DESCRIPTION("PCI driver module for ATI IXP IDE"); |
| MODULE_LICENSE("GPL"); |