Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index d120a5c..ab3894f 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -68,6 +68,9 @@
/* Apple MacBookPro6,2 */
{ USB_DEVICE(0x05ac, 0x8218) },
+ /* Apple MacBookAir3,1, MacBookAir3,2 */
+ { USB_DEVICE(0x05ac, 0x821b) },
+
/* AVM BlueFRITZ! USB v2.0 */
{ USB_DEVICE(0x057c, 0x3800) },
@@ -1029,6 +1032,8 @@
usb_set_intfdata(intf, data);
+ usb_enable_autosuspend(interface_to_usbdev(intf));
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
index a0471f2..48261b7 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -410,6 +410,9 @@
val &= ~(AR_WA_BIT6 | AR_WA_BIT7);
}
+ if (AR_SREV_9280(ah))
+ val |= AR_WA_BIT22;
+
if (AR_SREV_9285E_20(ah))
val |= AR_WA_BIT23;
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 9b8e7e3..170d44a 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -675,6 +675,7 @@
}
extern struct ieee80211_ops ath9k_ops;
+extern struct pm_qos_request_list ath9k_pm_qos_req;
extern int modparam_nohwcrypt;
extern int led_blink;
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 6576f68..f7ec31b 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -35,6 +35,7 @@
{ USB_DEVICE(0x07D1, 0x3A10) }, /* Dlink Wireless 150 */
{ USB_DEVICE(0x13D3, 0x3327) }, /* Azurewave */
{ USB_DEVICE(0x13D3, 0x3328) }, /* Azurewave */
+ { USB_DEVICE(0x13D3, 0x3346) }, /* IMC Networks */
{ USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */
{ USB_DEVICE(0x083A, 0xA704) }, /* SMC Networks */
{ },
@@ -540,11 +541,11 @@
return;
}
- usb_fill_int_urb(urb, hif_dev->udev,
+ usb_fill_bulk_urb(urb, hif_dev->udev,
usb_rcvbulkpipe(hif_dev->udev,
USB_REG_IN_PIPE),
nskb->data, MAX_REG_IN_BUF_SIZE,
- ath9k_hif_usb_reg_in_cb, nskb, 1);
+ ath9k_hif_usb_reg_in_cb, nskb);
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret) {
@@ -720,11 +721,11 @@
if (!skb)
goto err;
- usb_fill_int_urb(hif_dev->reg_in_urb, hif_dev->udev,
+ usb_fill_bulk_urb(hif_dev->reg_in_urb, hif_dev->udev,
usb_rcvbulkpipe(hif_dev->udev,
USB_REG_IN_PIPE),
skb->data, MAX_REG_IN_BUF_SIZE,
- ath9k_hif_usb_reg_in_cb, skb, 1);
+ ath9k_hif_usb_reg_in_cb, skb);
if (usb_submit_urb(hif_dev->reg_in_urb, GFP_KERNEL) != 0)
goto err;
@@ -843,14 +844,6 @@
goto err_fw_req;
}
- /* Alloc URBs */
- ret = ath9k_hif_usb_alloc_urbs(hif_dev);
- if (ret) {
- dev_err(&hif_dev->udev->dev,
- "ath9k_htc: Unable to allocate URBs\n");
- goto err_urb;
- }
-
/* Download firmware */
ret = ath9k_hif_usb_download_fw(hif_dev);
if (ret) {
@@ -866,16 +859,22 @@
*/
for (idx = 0; idx < alt->desc.bNumEndpoints; idx++) {
endp = &alt->endpoint[idx].desc;
- if (((endp->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
- == 0x04) &&
- ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_INT)) {
+ if ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_INT) {
endp->bmAttributes &= ~USB_ENDPOINT_XFERTYPE_MASK;
endp->bmAttributes |= USB_ENDPOINT_XFER_BULK;
endp->bInterval = 0;
}
}
+ /* Alloc URBs */
+ ret = ath9k_hif_usb_alloc_urbs(hif_dev);
+ if (ret) {
+ dev_err(&hif_dev->udev->dev,
+ "ath9k_htc: Unable to allocate URBs\n");
+ goto err_urb;
+ }
+
return 0;
err_fw_download:
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index cc13ee1..6ebc68b 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -484,6 +484,7 @@
ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
"Failed allocating banks for "
"external radio\n");
+ ath9k_hw_rf_free_ext_banks(ah);
return ecode;
}
@@ -952,9 +953,12 @@
REG_SET_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION);
break;
case NL80211_IFTYPE_STATION:
- case NL80211_IFTYPE_MONITOR:
REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE);
break;
+ default:
+ if (ah->is_monitoring)
+ REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE);
+ break;
}
}
@@ -1634,7 +1638,6 @@
switch (ah->opmode) {
case NL80211_IFTYPE_STATION:
- case NL80211_IFTYPE_MONITOR:
REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(next_beacon));
REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff);
REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff);
@@ -1663,6 +1666,14 @@
AR_TBTT_TIMER_EN | AR_DBA_TIMER_EN | AR_SWBA_TIMER_EN;
break;
default:
+ if (ah->is_monitoring) {
+ REG_WRITE(ah, AR_NEXT_TBTT_TIMER,
+ TU_TO_USEC(next_beacon));
+ REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff);
+ REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff);
+ flags |= AR_TBTT_TIMER_EN;
+ break;
+ }
ath_print(ath9k_hw_common(ah), ATH_DBG_BEACON,
"%s: unsupported opmode: %d\n",
__func__, ah->opmode);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index d032939..d47d1b4 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -622,6 +622,7 @@
bool sw_mgmt_crypto;
bool is_pciexpress;
+ bool is_monitoring;
bool need_an_top2_fixup;
u16 tx_trig_level;
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 95b41db..6a0d99e 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -15,6 +15,7 @@
*/
#include <linux/slab.h>
+#include <linux/pm_qos_params.h>
#include "ath9k.h"
@@ -179,6 +180,8 @@
.write = ath9k_iowrite32,
};
+struct pm_qos_request_list ath9k_pm_qos_req;
+
/**************************/
/* Initialization */
/**************************/
@@ -756,6 +759,9 @@
ath_init_leds(sc);
ath_start_rfkill_poll(sc);
+ pm_qos_add_request(&ath9k_pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
+ PM_QOS_DEFAULT_VALUE);
+
return 0;
error_world:
@@ -811,6 +817,8 @@
ath9k_ps_wakeup(sc);
+ pm_qos_remove_request(&ath9k_pm_qos_req);
+
wiphy_rfkill_stop_polling(sc->hw->wiphy);
ath_deinit_leds(sc);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index b52f1cf..25d3ef4 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -15,6 +15,7 @@
*/
#include <linux/nl80211.h>
+#include <linux/pm_qos_params.h>
#include "ath9k.h"
#include "btcoex.h"
@@ -93,11 +94,13 @@
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
unsigned long flags;
+ enum ath9k_power_mode power_mode;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if (++sc->ps_usecount != 1)
goto unlock;
+ power_mode = sc->sc_ah->power_mode;
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
/*
@@ -105,10 +108,12 @@
* useful data. Better clear them now so that they don't mess up
* survey data results.
*/
- spin_lock(&common->cc_lock);
- ath_hw_cycle_counters_update(common);
- memset(&common->cc_survey, 0, sizeof(common->cc_survey));
- spin_unlock(&common->cc_lock);
+ if (power_mode != ATH9K_PM_AWAKE) {
+ spin_lock(&common->cc_lock);
+ ath_hw_cycle_counters_update(common);
+ memset(&common->cc_survey, 0, sizeof(common->cc_survey));
+ spin_unlock(&common->cc_lock);
+ }
unlock:
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
@@ -1217,6 +1222,7 @@
ah->imask |= ATH9K_INT_CST;
sc->sc_flags &= ~SC_OP_INVALID;
+ sc->sc_ah->is_monitoring = false;
/* Disable BMISS interrupt when we're not associated */
ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
@@ -1238,6 +1244,8 @@
ath9k_btcoex_timer_resume(sc);
}
+ pm_qos_update_request(&ath9k_pm_qos_req, 55);
+
mutex_unlock:
mutex_unlock(&sc->mutex);
@@ -1415,6 +1423,8 @@
sc->sc_flags |= SC_OP_INVALID;
+ pm_qos_update_request(&ath9k_pm_qos_req, PM_QOS_DEFAULT_VALUE);
+
mutex_unlock(&sc->mutex);
ath_print(common, ATH_DBG_CONFIG, "Driver halt\n");
@@ -1493,8 +1503,7 @@
ath9k_hw_set_interrupts(ah, ah->imask);
if (vif->type == NL80211_IFTYPE_AP ||
- vif->type == NL80211_IFTYPE_ADHOC ||
- vif->type == NL80211_IFTYPE_MONITOR) {
+ vif->type == NL80211_IFTYPE_ADHOC) {
sc->sc_flags |= SC_OP_ANI_RUN;
ath_start_ani(common);
}
@@ -1644,8 +1653,12 @@
if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
if (conf->flags & IEEE80211_CONF_MONITOR) {
ath_print(common, ATH_DBG_CONFIG,
- "HW opmode set to Monitor mode\n");
- sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
+ "Monitor mode is enabled\n");
+ sc->sc_ah->is_monitoring = true;
+ } else {
+ ath_print(common, ATH_DBG_CONFIG,
+ "Monitor mode is disabled\n");
+ sc->sc_ah->is_monitoring = false;
}
}
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index fddb012..c76ea53 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -441,7 +441,7 @@
*/
if (((sc->sc_ah->opmode != NL80211_IFTYPE_AP) &&
(sc->rx.rxfilter & FIF_PROMISC_IN_BSS)) ||
- (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR))
+ (sc->sc_ah->is_monitoring))
rfilt |= ATH9K_RX_FILTER_PROM;
if (sc->rx.rxfilter & FIF_CONTROL)
@@ -897,7 +897,7 @@
* decryption and MIC failures. For monitor mode,
* we also ignore the CRC error.
*/
- if (ah->opmode == NL80211_IFTYPE_MONITOR) {
+ if (ah->is_monitoring) {
if (rx_stats->rs_status &
~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
ATH9K_RXERR_CRC))
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 42976b0..fa05b71 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -703,6 +703,7 @@
#define AR_WA_RESET_EN (1 << 18) /* Sw Control to enable PCI-Reset to POR (bit 15) */
#define AR_WA_ANALOG_SHIFT (1 << 20)
#define AR_WA_POR_SHORT (1 << 21) /* PCI-E Phy reset control */
+#define AR_WA_BIT22 (1 << 22)
#define AR9285_WA_DEFAULT 0x004a050b
#define AR9280_WA_DEFAULT 0x0040073b
#define AR_WA_DEFAULT 0x0000073f
diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index d8607f4..3317039 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -82,9 +82,11 @@
{ USB_DEVICE(0x07d1, 0x3c10) },
/* D-Link DWA 160 A2 */
{ USB_DEVICE(0x07d1, 0x3a09) },
+ /* D-Link DWA 130 D */
+ { USB_DEVICE(0x07d1, 0x3a0f) },
/* Netgear WNA1000 */
{ USB_DEVICE(0x0846, 0x9040) },
- /* Netgear WNDA3100 */
+ /* Netgear WNDA3100 (v1) */
{ USB_DEVICE(0x0846, 0x9010) },
/* Netgear WN111 v2 */
{ USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED },
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index 32dee2c..d5ef696 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -54,6 +54,7 @@
#define DRV_DESCRIPTION "802.11 data/management/control stack"
#define DRV_NAME "libipw"
+#define DRV_PROCNAME "ieee80211"
#define DRV_VERSION LIBIPW_VERSION
#define DRV_COPYRIGHT "Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>"
@@ -293,16 +294,16 @@
struct proc_dir_entry *e;
libipw_debug_level = debug;
- libipw_proc = proc_mkdir("ieee80211", init_net.proc_net);
+ libipw_proc = proc_mkdir(DRV_PROCNAME, init_net.proc_net);
if (libipw_proc == NULL) {
- LIBIPW_ERROR("Unable to create " DRV_NAME
+ LIBIPW_ERROR("Unable to create " DRV_PROCNAME
" proc directory\n");
return -EIO;
}
e = proc_create("debug_level", S_IRUGO | S_IWUSR, libipw_proc,
&debug_level_proc_fops);
if (!e) {
- remove_proc_entry(DRV_NAME, init_net.proc_net);
+ remove_proc_entry(DRV_PROCNAME, init_net.proc_net);
libipw_proc = NULL;
return -EIO;
}
@@ -319,7 +320,7 @@
#ifdef CONFIG_LIBIPW_DEBUG
if (libipw_proc) {
remove_proc_entry("debug_level", libipw_proc);
- remove_proc_entry(DRV_NAME, init_net.proc_net);
+ remove_proc_entry(DRV_PROCNAME, init_net.proc_net);
libipw_proc = NULL;
}
#endif /* CONFIG_LIBIPW_DEBUG */
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 8f8c4b7..7edf8c2 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -4000,7 +4000,8 @@
* "the hard way", rather than using device's scan.
*/
if (iwl3945_mod_params.disable_hw_scan) {
- IWL_ERR(priv, "sw scan support is deprecated\n");
+ dev_printk(KERN_DEBUG, &(pdev->dev),
+ "sw scan support is deprecated\n");
iwl3945_hw_ops.hw_scan = NULL;
}
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 5046a00..373930a 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -700,8 +700,9 @@
if (priv->scan_channel < priv->scan_req->n_channels) {
cancel_delayed_work(&priv->scan_work);
- queue_delayed_work(priv->work_thread, &priv->scan_work,
- msecs_to_jiffies(300));
+ if (!priv->stopping)
+ queue_delayed_work(priv->work_thread, &priv->scan_work,
+ msecs_to_jiffies(300));
}
/* This is the final data we are about to send */
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index f062ed5..cb14c38 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -36,6 +36,7 @@
/* CFG80211 */
struct wireless_dev *wdev;
bool wiphy_registered;
+ bool stopping;
struct cfg80211_scan_request *scan_req;
u8 assoc_bss[ETH_ALEN];
u8 disassoc_reason;
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 47ce5a6..46b88b1 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -104,6 +104,7 @@
lbs_deb_enter(LBS_DEB_NET);
spin_lock_irq(&priv->driver_lock);
+ priv->stopping = false;
if (priv->connect_status == LBS_CONNECTED)
netif_carrier_on(dev);
@@ -131,10 +132,16 @@
lbs_deb_enter(LBS_DEB_NET);
spin_lock_irq(&priv->driver_lock);
+ priv->stopping = true;
netif_stop_queue(dev);
spin_unlock_irq(&priv->driver_lock);
schedule_work(&priv->mcast_work);
+ cancel_delayed_work_sync(&priv->scan_work);
+ if (priv->scan_req) {
+ cfg80211_scan_done(priv->scan_req, false);
+ priv->scan_req = NULL;
+ }
lbs_deb_leave(LBS_DEB_NET);
return 0;
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index bfef5ba..84093b0 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1175,6 +1175,12 @@
hci_send_cmd(hdev,
HCI_OP_READ_REMOTE_EXT_FEATURES,
sizeof(cp), &cp);
+ } else if (!ev->status && conn->out &&
+ conn->sec_level == BT_SECURITY_HIGH) {
+ struct hci_cp_auth_requested cp;
+ cp.handle = ev->handle;
+ hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED,
+ sizeof(cp), &cp);
} else {
conn->state = BT_CONNECTED;
hci_proto_connect_cfm(conn, ev->status);
diff --git a/net/bluetooth/hidp/Kconfig b/net/bluetooth/hidp/Kconfig
index 98fdfa1..86a9154 100644
--- a/net/bluetooth/hidp/Kconfig
+++ b/net/bluetooth/hidp/Kconfig
@@ -1,6 +1,6 @@
config BT_HIDP
tristate "HIDP protocol support"
- depends on BT && BT_L2CAP && INPUT
+ depends on BT && BT_L2CAP && INPUT && HID_SUPPORT
select HID
help
HIDP (Human Interface Device Protocol) is a transport layer
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index daa7a98..cd8f6ea 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -2421,11 +2421,11 @@
break;
case 2:
- *val = __le16_to_cpu(*((__le16 *) opt->val));
+ *val = get_unaligned_le16(opt->val);
break;
case 4:
- *val = __le32_to_cpu(*((__le32 *) opt->val));
+ *val = get_unaligned_le32(opt->val);
break;
default:
@@ -2452,11 +2452,11 @@
break;
case 2:
- *((__le16 *) opt->val) = cpu_to_le16(val);
+ put_unaligned_le16(val, opt->val);
break;
case 4:
- *((__le32 *) opt->val) = cpu_to_le32(val);
+ put_unaligned_le32(val, opt->val);
break;
default:
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 39a5d87..fa642aa 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -79,7 +79,10 @@
static void rfcomm_process_connect(struct rfcomm_session *s);
-static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst, int *err);
+static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src,
+ bdaddr_t *dst,
+ u8 sec_level,
+ int *err);
static struct rfcomm_session *rfcomm_session_get(bdaddr_t *src, bdaddr_t *dst);
static void rfcomm_session_del(struct rfcomm_session *s);
@@ -401,7 +404,7 @@
s = rfcomm_session_get(src, dst);
if (!s) {
- s = rfcomm_session_create(src, dst, &err);
+ s = rfcomm_session_create(src, dst, d->sec_level, &err);
if (!s)
return err;
}
@@ -679,7 +682,10 @@
rfcomm_session_put(s);
}
-static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst, int *err)
+static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src,
+ bdaddr_t *dst,
+ u8 sec_level,
+ int *err)
{
struct rfcomm_session *s = NULL;
struct sockaddr_l2 addr;
@@ -704,6 +710,7 @@
sk = sock->sk;
lock_sock(sk);
l2cap_pi(sk)->imtu = l2cap_mtu;
+ l2cap_pi(sk)->sec_level = sec_level;
if (l2cap_ertm)
l2cap_pi(sk)->mode = L2CAP_MODE_ERTM;
release_sock(sk);
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index f9163b1..7aa8559 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -391,6 +391,9 @@
u32 hw_reconf_flags = 0;
int i;
+ if (local->scan_sdata == sdata)
+ ieee80211_scan_cancel(local);
+
clear_bit(SDATA_STATE_RUNNING, &sdata->state);
/*
@@ -523,9 +526,6 @@
synchronize_rcu();
skb_queue_purge(&sdata->skb_queue);
- if (local->scan_sdata == sdata)
- ieee80211_scan_cancel(local);
-
/*
* Disable beaconing here for mesh only, AP and IBSS
* are already taken care of.
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index c506241..4e78e3f 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -224,8 +224,8 @@
}
*rdev = cfg80211_get_dev_from_ifindex(sock_net(skb->sk), ifidx);
- if (IS_ERR(dev)) {
- err = PTR_ERR(dev);
+ if (IS_ERR(*rdev)) {
+ err = PTR_ERR(*rdev);
goto out_rtnl;
}