usbcore: remove unused bandwith-related code
This patch (as841) removes from usbcore a couple of support routines
meant to help with bandwidth allocation. With the changes to uhci-hcd
in the previous patch, these routines are no longer used anywhere.
Also removed is the CONFIG_USB_BANDWIDTH option; it no longer does
anything and is no longer needed since the HCDs now handle bandwidth
issues correctly.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 3e66b2a..2fc0f88 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -33,19 +33,6 @@
Most users want to say Y here.
-config USB_BANDWIDTH
- bool "Enforce USB bandwidth allocation (EXPERIMENTAL)"
- depends on USB && EXPERIMENTAL
- help
- If you say Y here, the USB subsystem enforces USB bandwidth
- allocation and will prevent some device opens from succeeding
- if they would cause USB bandwidth usage to go above 90% of
- the bus bandwidth.
-
- If you say N here, these conditions will cause warning messages
- about USB bandwidth usage to be logged and some devices or
- drivers may not work correctly.
-
config USB_DYNAMIC_MINORS
bool "Dynamic USB minor allocation (EXPERIMENTAL)"
depends on USB && EXPERIMENTAL
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 10064af..b26c19e 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -45,8 +45,6 @@
#include "hub.h"
-// #define USB_BANDWIDTH_MESSAGES
-
/*-------------------------------------------------------------------------*/
/*
@@ -891,136 +889,6 @@
}
EXPORT_SYMBOL (usb_calc_bus_time);
-/*
- * usb_check_bandwidth():
- *
- * old_alloc is from host_controller->bandwidth_allocated in microseconds;
- * bustime is from calc_bus_time(), but converted to microseconds.
- *
- * returns <bustime in us> if successful,
- * or -ENOSPC if bandwidth request fails.
- *
- * FIXME:
- * This initial implementation does not use Endpoint.bInterval
- * in managing bandwidth allocation.
- * It probably needs to be expanded to use Endpoint.bInterval.
- * This can be done as a later enhancement (correction).
- *
- * This will also probably require some kind of
- * frame allocation tracking...meaning, for example,
- * that if multiple drivers request interrupts every 10 USB frames,
- * they don't all have to be allocated at
- * frame numbers N, N+10, N+20, etc. Some of them could be at
- * N+11, N+21, N+31, etc., and others at
- * N+12, N+22, N+32, etc.
- *
- * Similarly for isochronous transfers...
- *
- * Individual HCDs can schedule more directly ... this logic
- * is not correct for high speed transfers.
- */
-int usb_check_bandwidth (struct usb_device *dev, struct urb *urb)
-{
- unsigned int pipe = urb->pipe;
- long bustime;
- int is_in = usb_pipein (pipe);
- int is_iso = usb_pipeisoc (pipe);
- int old_alloc = dev->bus->bandwidth_allocated;
- int new_alloc;
-
-
- bustime = NS_TO_US (usb_calc_bus_time (dev->speed, is_in, is_iso,
- usb_maxpacket (dev, pipe, !is_in)));
- if (is_iso)
- bustime /= urb->number_of_packets;
-
- new_alloc = old_alloc + (int) bustime;
- if (new_alloc > FRAME_TIME_MAX_USECS_ALLOC) {
-#ifdef DEBUG
- char *mode =
-#ifdef CONFIG_USB_BANDWIDTH
- "";
-#else
- "would have ";
-#endif
- dev_dbg (&dev->dev, "usb_check_bandwidth %sFAILED: %d + %ld = %d usec\n",
- mode, old_alloc, bustime, new_alloc);
-#endif
-#ifdef CONFIG_USB_BANDWIDTH
- bustime = -ENOSPC; /* report error */
-#endif
- }
-
- return bustime;
-}
-EXPORT_SYMBOL (usb_check_bandwidth);
-
-
-/**
- * usb_claim_bandwidth - records bandwidth for a periodic transfer
- * @dev: source/target of request
- * @urb: request (urb->dev == dev)
- * @bustime: bandwidth consumed, in (average) microseconds per frame
- * @isoc: true iff the request is isochronous
- *
- * Bus bandwidth reservations are recorded purely for diagnostic purposes.
- * HCDs are expected not to overcommit periodic bandwidth, and to record such
- * reservations whenever endpoints are added to the periodic schedule.
- *
- * FIXME averaging per-frame is suboptimal. Better to sum over the HCD's
- * entire periodic schedule ... 32 frames for OHCI, 1024 for UHCI, settable
- * for EHCI (256/512/1024 frames, default 1024) and have the bus expose how
- * large its periodic schedule is.
- */
-void usb_claim_bandwidth (struct usb_device *dev, struct urb *urb, int bustime, int isoc)
-{
- dev->bus->bandwidth_allocated += bustime;
- if (isoc)
- dev->bus->bandwidth_isoc_reqs++;
- else
- dev->bus->bandwidth_int_reqs++;
- urb->bandwidth = bustime;
-
-#ifdef USB_BANDWIDTH_MESSAGES
- dev_dbg (&dev->dev, "bandwidth alloc increased by %d (%s) to %d for %d requesters\n",
- bustime,
- isoc ? "ISOC" : "INTR",
- dev->bus->bandwidth_allocated,
- dev->bus->bandwidth_int_reqs + dev->bus->bandwidth_isoc_reqs);
-#endif
-}
-EXPORT_SYMBOL (usb_claim_bandwidth);
-
-
-/**
- * usb_release_bandwidth - reverses effect of usb_claim_bandwidth()
- * @dev: source/target of request
- * @urb: request (urb->dev == dev)
- * @isoc: true iff the request is isochronous
- *
- * This records that previously allocated bandwidth has been released.
- * Bandwidth is released when endpoints are removed from the host controller's
- * periodic schedule.
- */
-void usb_release_bandwidth (struct usb_device *dev, struct urb *urb, int isoc)
-{
- dev->bus->bandwidth_allocated -= urb->bandwidth;
- if (isoc)
- dev->bus->bandwidth_isoc_reqs--;
- else
- dev->bus->bandwidth_int_reqs--;
-
-#ifdef USB_BANDWIDTH_MESSAGES
- dev_dbg (&dev->dev, "bandwidth alloc reduced by %d (%s) to %d for %d requesters\n",
- urb->bandwidth,
- isoc ? "ISOC" : "INTR",
- dev->bus->bandwidth_allocated,
- dev->bus->bandwidth_int_reqs + dev->bus->bandwidth_isoc_reqs);
-#endif
- urb->bandwidth = 0;
-}
-EXPORT_SYMBOL (usb_release_bandwidth);
-
/*-------------------------------------------------------------------------*/
@@ -1034,11 +902,6 @@
{
unsigned long flags;
- /* Release any periodic transfer bandwidth */
- if (urb->bandwidth)
- usb_release_bandwidth (urb->dev, urb,
- usb_pipeisoc (urb->pipe));
-
/* clear all state linking urb to this dev (and hcd) */
spin_lock_irqsave (&hcd_data_lock, flags);
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 8f8df0d..2a269ca 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -308,10 +308,6 @@
#define NS_TO_US(ns) ((ns + 500L) / 1000L)
/* convert & round nanoseconds to microseconds */
-extern void usb_claim_bandwidth (struct usb_device *dev, struct urb *urb,
- int bustime, int isoc);
-extern void usb_release_bandwidth (struct usb_device *dev, struct urb *urb,
- int isoc);
/*
* Full/low speed bandwidth allocation constants/support.
@@ -324,8 +320,6 @@
#define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
#define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
-extern int usb_check_bandwidth (struct usb_device *dev, struct urb *urb);
-
/*
* Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
* ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 9801d08e..a4fa3e6 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -235,7 +235,6 @@
urb->status = -EINPROGRESS;
urb->actual_length = 0;
- urb->bandwidth = 0;
/* Lots of sanity checks, so HCDs can rely on clean data
* and don't need to duplicate tests
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 1c56386..3b08ab3 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1110,7 +1110,6 @@
struct kref kref; /* reference count of the URB */
spinlock_t lock; /* lock for the URB */
void *hcpriv; /* private data for host controller */
- int bandwidth; /* bandwidth for INT/ISO request */
atomic_t use_count; /* concurrent submissions counter */
u8 reject; /* submissions will fail */