rt2x00: Fix rt2400pci signal
After sampling hundreds of RX frame descriptors,
the results were conclusive:
- The Ralink documentation regarding the SIGNAL and RSSI are wrong.
It turns out that of the 5 BBR registers, we should not use BBR0 and BBR1
for SIGNAL and RSSI respectively, but actually BBR1 and BBR2.
BBR0 does show values, but the exact meaning remains unclear,
but they cannot be translated into a SIGNAL or RSSI field.
BBR3, BBR4 and BBR5 are always 0, so their meaning is unknown.
As it turns out, the reported SIGNAL is the PLCP value, this
in contradiction to what was expected looking at rt2500pci which
only reported the PLCP values for OFDM rates and bitrate values
for CCK rates.
This means we should let the driver raise the flag about the contents
of the SIGNAL field so rt2x00lib can always do the right thing based
on what the driver reports.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index a92626b..4cd2842 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1058,9 +1058,11 @@
struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data;
u32 word0;
u32 word2;
+ u32 word3;
rt2x00_desc_read(priv_rx->desc, 0, &word0);
rt2x00_desc_read(priv_rx->desc, 2, &word2);
+ rt2x00_desc_read(priv_rx->desc, 3, &word3);
rxdesc->flags = 0;
if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
@@ -1070,9 +1072,11 @@
/*
* Obtain the status about this packet.
+ * The signal is the PLCP value.
*/
rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
- rxdesc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
+ rxdesc->signal_plcp = 1;
+ rxdesc->rssi = rt2x00_get_field32(word2, RXD_W3_RSSI) -
entry->queue->rt2x00dev->rssi_offset;
rxdesc->ofdm = 0;
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index da178d4..a5210f9 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -899,13 +899,13 @@
* Word2
*/
#define RXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff)
-#define RXD_W2_SIGNAL FIELD32(0x00ff0000)
-#define RXD_W2_RSSI FIELD32(0xff000000)
+#define RXD_W2_BBR0 FIELD32(0x00ff0000)
+#define RXD_W2_SIGNAL FIELD32(0xff000000)
/*
* Word3
*/
-#define RXD_W3_BBR2 FIELD32(0x000000ff)
+#define RXD_W3_RSSI FIELD32(0x000000ff)
#define RXD_W3_BBR3 FIELD32(0x0000ff00)
#define RXD_W3_BBR4 FIELD32(0x00ff0000)
#define RXD_W3_BBR5 FIELD32(0xff000000)
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 4ae09b4..0f5139a 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1219,10 +1219,17 @@
if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
+ /*
+ * Obtain the status about this packet.
+ * When frame was received with an OFDM bitrate,
+ * the signal is the PLCP value. If it was received with
+ * a CCK bitrate the signal is the rate in 100kbit/s.
+ */
+ rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
+ rxdesc->signal_plcp = rxdesc->ofdm;
rxdesc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
entry->queue->rt2x00dev->rssi_offset;
- rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
rxdesc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS);
}
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 8dfebfd..c8216d7 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1135,11 +1135,15 @@
/*
* Obtain the status about this packet.
+ * When frame was received with an OFDM bitrate,
+ * the signal is the PLCP value. If it was received with
+ * a CCK bitrate the signal is the rate in 100kbit/s.
*/
+ rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
+ rxdesc->signal_plcp = rxdesc->ofdm;
rxdesc->rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) -
entry->queue->rt2x00dev->rssi_offset;
- rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
rxdesc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index eb2d21c..a885254 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -574,19 +574,21 @@
u16 fc;
/*
+ * If the signal is the plcp value,
+ * we need to strip the preamble bit (0x08).
+ */
+ if (rxdesc->signal_plcp)
+ rxdesc->signal &= ~0x08;
+
+ /*
* Update RX statistics.
*/
sband = &rt2x00dev->bands[rt2x00dev->curr_band];
for (i = 0; i < sband->n_bitrates; i++) {
rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
- /*
- * When frame was received with an OFDM bitrate,
- * the signal is the PLCP value. If it was received with
- * a CCK bitrate the signal is the rate in 100kbit/s.
- */
- if ((rxdesc->ofdm && rate->plcp == rxdesc->signal) ||
- (!rxdesc->ofdm && rate->bitrate == rxdesc->signal)) {
+ if ((rxdesc->signal_plcp && rate->plcp == rxdesc->signal) ||
+ (!rxdesc->signal_plcp && rate->bitrate == rxdesc->signal)) {
idx = i;
break;
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index fbabf38..c5f46f2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -134,6 +134,8 @@
* Summary of information that has been read from the RX frame descriptor.
*
* @signal: Signal of the received frame.
+ * @signal_plcp: Does the signal field contain the plcp value,
+ * or does it contain the bitrate itself.
* @rssi: RSSI of the received frame.
* @ofdm: Was frame send with an OFDM rate.
* @size: Data size of the received frame.
@@ -142,6 +144,7 @@
*/
struct rxdone_entry_desc {
int signal;
+ int signal_plcp;
int rssi;
int ofdm;
int size;
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 914aee0..4baa916 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1645,10 +1645,14 @@
/*
* Obtain the status about this packet.
+ * When frame was received with an OFDM bitrate,
+ * the signal is the PLCP value. If it was received with
+ * a CCK bitrate the signal is the rate in 100kbit/s.
*/
- rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
- rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1);
rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
+ rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
+ rxdesc->signal_plcp = rxdesc->ofdm;
+ rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1);
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
rxdesc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS);
}
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index fc38c0c..4893881 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1405,10 +1405,14 @@
/*
* Obtain the status about this packet.
+ * When frame was received with an OFDM bitrate,
+ * the signal is the PLCP value. If it was received with
+ * a CCK bitrate the signal is the rate in 100kbit/s.
*/
- rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
- rxdesc->rssi = rt73usb_agc_to_rssi(entry->queue->rt2x00dev, word1);
rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
+ rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
+ rxdesc->signal_plcp = rxdesc->ofdm;
+ rxdesc->rssi = rt73usb_agc_to_rssi(entry->queue->rt2x00dev, word1);
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
rxdesc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS);