| /* |
| * hdmi.c |
| * |
| * HDMI interface DSS driver setting for TI's OMAP4 family of processor. |
| * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/ |
| * Authors: Yong Zhi |
| * Mythri pk <mythripk@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #define DSS_SUBSYS_NAME "HDMI" |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| #include <linux/string.h> |
| #include <video/omapdss.h> |
| |
| #include "dss.h" |
| #include "hdmi.h" |
| |
| static struct { |
| struct mutex lock; |
| struct omap_display_platform_data *pdata; |
| struct platform_device *pdev; |
| void __iomem *base_wp; /* HDMI wrapper */ |
| int code; |
| int mode; |
| u8 edid[HDMI_EDID_MAX_LENGTH]; |
| u8 edid_set; |
| bool custom_set; |
| struct hdmi_config cfg; |
| } hdmi; |
| |
| /* |
| * Logic for the below structure : |
| * user enters the CEA or VESA timings by specifying the HDMI/DVI code. |
| * There is a correspondence between CEA/VESA timing and code, please |
| * refer to section 6.3 in HDMI 1.3 specification for timing code. |
| * |
| * In the below structure, cea_vesa_timings corresponds to all OMAP4 |
| * supported CEA and VESA timing values.code_cea corresponds to the CEA |
| * code, It is used to get the timing from cea_vesa_timing array.Similarly |
| * with code_vesa. Code_index is used for back mapping, that is once EDID |
| * is read from the TV, EDID is parsed to find the timing values and then |
| * map it to corresponding CEA or VESA index. |
| */ |
| |
| static const struct hdmi_timings cea_vesa_timings[OMAP_HDMI_TIMINGS_NB] = { |
| { {640, 480, 25200, 96, 16, 48, 2, 10, 33} , 0 , 0}, |
| { {1280, 720, 74250, 40, 440, 220, 5, 5, 20}, 1, 1}, |
| { {1280, 720, 74250, 40, 110, 220, 5, 5, 20}, 1, 1}, |
| { {720, 480, 27027, 62, 16, 60, 6, 9, 30}, 0, 0}, |
| { {2880, 576, 108000, 256, 48, 272, 5, 5, 39}, 0, 0}, |
| { {1440, 240, 27027, 124, 38, 114, 3, 4, 15}, 0, 0}, |
| { {1440, 288, 27000, 126, 24, 138, 3, 2, 19}, 0, 0}, |
| { {1920, 540, 74250, 44, 528, 148, 5, 2, 15}, 1, 1}, |
| { {1920, 540, 74250, 44, 88, 148, 5, 2, 15}, 1, 1}, |
| { {1920, 1080, 148500, 44, 88, 148, 5, 4, 36}, 1, 1}, |
| { {720, 576, 27000, 64, 12, 68, 5, 5, 39}, 0, 0}, |
| { {1440, 576, 54000, 128, 24, 136, 5, 5, 39}, 0, 0}, |
| { {1920, 1080, 148500, 44, 528, 148, 5, 4, 36}, 1, 1}, |
| { {2880, 480, 108108, 248, 64, 240, 6, 9, 30}, 0, 0}, |
| { {1920, 1080, 74250, 44, 638, 148, 5, 4, 36}, 1, 1}, |
| /* VESA From Here */ |
| { {640, 480, 25175, 96, 16, 48, 2 , 11, 31}, 0, 0}, |
| { {800, 600, 40000, 128, 40, 88, 4 , 1, 23}, 1, 1}, |
| { {848, 480, 33750, 112, 16, 112, 8 , 6, 23}, 1, 1}, |
| { {1280, 768, 79500, 128, 64, 192, 7 , 3, 20}, 1, 0}, |
| { {1280, 800, 83500, 128, 72, 200, 6 , 3, 22}, 1, 0}, |
| { {1360, 768, 85500, 112, 64, 256, 6 , 3, 18}, 1, 1}, |
| { {1280, 960, 108000, 112, 96, 312, 3 , 1, 36}, 1, 1}, |
| { {1280, 1024, 108000, 112, 48, 248, 3 , 1, 38}, 1, 1}, |
| { {1024, 768, 65000, 136, 24, 160, 6, 3, 29}, 0, 0}, |
| { {1400, 1050, 121750, 144, 88, 232, 4, 3, 32}, 1, 0}, |
| { {1440, 900, 106500, 152, 80, 232, 6, 3, 25}, 1, 0}, |
| { {1680, 1050, 146250, 176 , 104, 280, 6, 3, 30}, 1, 0}, |
| { {1366, 768, 85500, 143, 70, 213, 3, 3, 24}, 1, 1}, |
| { {1920, 1080, 148500, 44, 148, 80, 5, 4, 36}, 1, 1}, |
| { {1280, 768, 68250, 32, 48, 80, 7, 3, 12}, 0, 1}, |
| { {1400, 1050, 101000, 32, 48, 80, 4, 3, 23}, 0, 1}, |
| { {1680, 1050, 119000, 32, 48, 80, 6, 3, 21}, 0, 1}, |
| { {1280, 800, 79500, 32, 48, 80, 6, 3, 14}, 0, 1}, |
| { {1280, 720, 74250, 40, 110, 220, 5, 5, 20}, 1, 1} |
| }; |
| |
| /* |
| * This is a static mapping array which maps the timing values |
| * with corresponding CEA / VESA code |
| */ |
| static const int code_index[OMAP_HDMI_TIMINGS_NB] = { |
| 1, 19, 4, 2, 37, 6, 21, 20, 5, 16, 17, 29, 31, 35, 32, |
| /* <--15 CEA 17--> vesa*/ |
| 4, 9, 0xE, 0x17, 0x1C, 0x27, 0x20, 0x23, 0x10, 0x2A, |
| 0X2F, 0x3A, 0X51, 0X52, 0x16, 0x29, 0x39, 0x1B |
| }; |
| |
| /* |
| * This is reverse static mapping which maps the CEA / VESA code |
| * to the corresponding timing values |
| */ |
| static const int code_cea[39] = { |
| -1, 0, 3, 3, 2, 8, 5, 5, -1, -1, |
| -1, -1, -1, -1, -1, -1, 9, 10, 10, 1, |
| 7, 6, 6, -1, -1, -1, -1, -1, -1, 11, |
| 11, 12, 14, -1, -1, 13, 13, 4, 4 |
| }; |
| |
| static const int code_vesa[85] = { |
| -1, -1, -1, -1, 15, -1, -1, -1, -1, 16, |
| -1, -1, -1, -1, 17, -1, 23, -1, -1, -1, |
| -1, -1, 29, 18, -1, -1, -1, 32, 19, -1, |
| -1, -1, 21, -1, -1, 22, -1, -1, -1, 20, |
| -1, 30, 24, -1, -1, -1, -1, 25, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, 31, 26, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, 27, 28, -1, 33}; |
| |
| static const u8 edid_header[8] = {0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0}; |
| |
| static inline void hdmi_write_reg(const struct hdmi_reg idx, u32 val) |
| { |
| __raw_writel(val, hdmi.base_wp + idx.idx); |
| } |
| |
| static inline u32 hdmi_read_reg(const struct hdmi_reg idx) |
| { |
| return __raw_readl(hdmi.base_wp + idx.idx); |
| } |
| |
| static inline int hdmi_wait_for_bit_change(const struct hdmi_reg idx, |
| int b2, int b1, u32 val) |
| { |
| u32 t = 0; |
| while (val != REG_GET(idx, b2, b1)) { |
| udelay(1); |
| if (t++ > 10000) |
| return !val; |
| } |
| return val; |
| } |
| |
| int hdmi_init_display(struct omap_dss_device *dssdev) |
| { |
| DSSDBG("init_display\n"); |
| |
| return 0; |
| } |
| |
| static int hdmi_pll_init(enum hdmi_clk_refsel refsel, int dcofreq, |
| struct hdmi_pll_info *fmt, u16 sd) |
| { |
| u32 r; |
| |
| /* PLL start always use manual mode */ |
| REG_FLD_MOD(PLLCTRL_PLL_CONTROL, 0x0, 0, 0); |
| |
| r = hdmi_read_reg(PLLCTRL_CFG1); |
| r = FLD_MOD(r, fmt->regm, 20, 9); /* CFG1_PLL_REGM */ |
| r = FLD_MOD(r, fmt->regn, 8, 1); /* CFG1_PLL_REGN */ |
| |
| hdmi_write_reg(PLLCTRL_CFG1, r); |
| |
| r = hdmi_read_reg(PLLCTRL_CFG2); |
| |
| r = FLD_MOD(r, 0x0, 12, 12); /* PLL_HIGHFREQ divide by 2 */ |
| r = FLD_MOD(r, 0x1, 13, 13); /* PLL_REFEN */ |
| r = FLD_MOD(r, 0x0, 14, 14); /* PHY_CLKINEN de-assert during locking */ |
| |
| if (dcofreq) { |
| /* divider programming for frequency beyond 1000Mhz */ |
| REG_FLD_MOD(PLLCTRL_CFG3, sd, 17, 10); |
| r = FLD_MOD(r, 0x4, 3, 1); /* 1000MHz and 2000MHz */ |
| } else { |
| r = FLD_MOD(r, 0x2, 3, 1); /* 500MHz and 1000MHz */ |
| } |
| |
| hdmi_write_reg(PLLCTRL_CFG2, r); |
| |
| r = hdmi_read_reg(PLLCTRL_CFG4); |
| r = FLD_MOD(r, fmt->regm2, 24, 18); |
| r = FLD_MOD(r, fmt->regmf, 17, 0); |
| |
| hdmi_write_reg(PLLCTRL_CFG4, r); |
| |
| /* go now */ |
| REG_FLD_MOD(PLLCTRL_PLL_GO, 0x1, 0, 0); |
| |
| /* wait for bit change */ |
| if (hdmi_wait_for_bit_change(PLLCTRL_PLL_GO, 0, 0, 1) != 1) { |
| DSSERR("PLL GO bit not set\n"); |
| return -ETIMEDOUT; |
| } |
| |
| /* Wait till the lock bit is set in PLL status */ |
| if (hdmi_wait_for_bit_change(PLLCTRL_PLL_STATUS, 1, 1, 1) != 1) { |
| DSSWARN("cannot lock PLL\n"); |
| DSSWARN("CFG1 0x%x\n", |
| hdmi_read_reg(PLLCTRL_CFG1)); |
| DSSWARN("CFG2 0x%x\n", |
| hdmi_read_reg(PLLCTRL_CFG2)); |
| DSSWARN("CFG4 0x%x\n", |
| hdmi_read_reg(PLLCTRL_CFG4)); |
| return -ETIMEDOUT; |
| } |
| |
| DSSDBG("PLL locked!\n"); |
| |
| return 0; |
| } |
| |
| /* PHY_PWR_CMD */ |
| static int hdmi_set_phy_pwr(enum hdmi_phy_pwr val) |
| { |
| /* Command for power control of HDMI PHY */ |
| REG_FLD_MOD(HDMI_WP_PWR_CTRL, val, 7, 6); |
| |
| /* Status of the power control of HDMI PHY */ |
| if (hdmi_wait_for_bit_change(HDMI_WP_PWR_CTRL, 5, 4, val) != val) { |
| DSSERR("Failed to set PHY power mode to %d\n", val); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| /* PLL_PWR_CMD */ |
| static int hdmi_set_pll_pwr(enum hdmi_pll_pwr val) |
| { |
| /* Command for power control of HDMI PLL */ |
| REG_FLD_MOD(HDMI_WP_PWR_CTRL, val, 3, 2); |
| |
| /* wait till PHY_PWR_STATUS is set */ |
| if (hdmi_wait_for_bit_change(HDMI_WP_PWR_CTRL, 1, 0, val) != val) { |
| DSSERR("Failed to set PHY_PWR_STATUS\n"); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int hdmi_pll_reset(void) |
| { |
| /* SYSRESET controlled by power FSM */ |
| REG_FLD_MOD(PLLCTRL_PLL_CONTROL, 0x0, 3, 3); |
| |
| /* READ 0x0 reset is in progress */ |
| if (hdmi_wait_for_bit_change(PLLCTRL_PLL_STATUS, 0, 0, 1) != 1) { |
| DSSERR("Failed to sysreset PLL\n"); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int hdmi_phy_init(void) |
| { |
| u16 r = 0; |
| |
| r = hdmi_set_phy_pwr(HDMI_PHYPWRCMD_LDOON); |
| if (r) |
| return r; |
| |
| r = hdmi_set_phy_pwr(HDMI_PHYPWRCMD_TXON); |
| if (r) |
| return r; |
| |
| /* |
| * Read address 0 in order to get the SCP reset done completed |
| * Dummy access performed to make sure reset is done |
| */ |
| hdmi_read_reg(HDMI_TXPHY_TX_CTRL); |
| |
| /* |
| * Write to phy address 0 to configure the clock |
| * use HFBITCLK write HDMI_TXPHY_TX_CONTROL_FREQOUT field |
| */ |
| REG_FLD_MOD(HDMI_TXPHY_TX_CTRL, 0x1, 31, 30); |
| |
| /* Write to phy address 1 to start HDMI line (TXVALID and TMDSCLKEN) */ |
| hdmi_write_reg(HDMI_TXPHY_DIGITAL_CTRL, 0xF0000000); |
| |
| /* Setup max LDO voltage */ |
| REG_FLD_MOD(HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0); |
| |
| /* Write to phy address 3 to change the polarity control */ |
| REG_FLD_MOD(HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27); |
| |
| return 0; |
| } |
| |
| static int hdmi_wait_softreset(void) |
| { |
| /* reset W1 */ |
| REG_FLD_MOD(HDMI_WP_SYSCONFIG, 0x1, 0, 0); |
| |
| /* wait till SOFTRESET == 0 */ |
| if (hdmi_wait_for_bit_change(HDMI_WP_SYSCONFIG, 0, 0, 0) != 0) { |
| DSSERR("sysconfig reset failed\n"); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int hdmi_pll_program(struct hdmi_pll_info *fmt) |
| { |
| u16 r = 0; |
| enum hdmi_clk_refsel refsel; |
| |
| /* wait for wrapper reset */ |
| r = hdmi_wait_softreset(); |
| if (r) |
| return r; |
| |
| r = hdmi_set_pll_pwr(HDMI_PLLPWRCMD_ALLOFF); |
| if (r) |
| return r; |
| |
| r = hdmi_set_pll_pwr(HDMI_PLLPWRCMD_BOTHON_ALLCLKS); |
| if (r) |
| return r; |
| |
| r = hdmi_pll_reset(); |
| if (r) |
| return r; |
| |
| refsel = HDMI_REFSEL_SYSCLK; |
| |
| r = hdmi_pll_init(refsel, fmt->dcofreq, fmt, fmt->regsd); |
| if (r) |
| return r; |
| |
| return 0; |
| } |
| |
| static void hdmi_phy_off(void) |
| { |
| hdmi_set_phy_pwr(HDMI_PHYPWRCMD_OFF); |
| } |
| |
| static int hdmi_core_ddc_edid(u8 *pedid, int ext) |
| { |
| u32 i, j; |
| char checksum = 0; |
| u32 offset = 0; |
| |
| /* Turn on CLK for DDC */ |
| REG_FLD_MOD(HDMI_CORE_AV_DPD, 0x7, 2, 0); |
| |
| /* |
| * SW HACK : Without the Delay DDC(i2c bus) reads 0 values / |
| * right shifted values( The behavior is not consistent and seen only |
| * with some TV's) |
| */ |
| usleep_range(800, 1000); |
| |
| if (!ext) { |
| /* Clk SCL Devices */ |
| REG_FLD_MOD(HDMI_CORE_DDC_CMD, 0xA, 3, 0); |
| |
| /* HDMI_CORE_DDC_STATUS_IN_PROG */ |
| if (hdmi_wait_for_bit_change(HDMI_CORE_DDC_STATUS, |
| 4, 4, 0) != 0) { |
| DSSERR("Failed to program DDC\n"); |
| return -ETIMEDOUT; |
| } |
| |
| /* Clear FIFO */ |
| REG_FLD_MOD(HDMI_CORE_DDC_CMD, 0x9, 3, 0); |
| |
| /* HDMI_CORE_DDC_STATUS_IN_PROG */ |
| if (hdmi_wait_for_bit_change(HDMI_CORE_DDC_STATUS, |
| 4, 4, 0) != 0) { |
| DSSERR("Failed to program DDC\n"); |
| return -ETIMEDOUT; |
| } |
| |
| } else { |
| if (ext % 2 != 0) |
| offset = 0x80; |
| } |
| |
| /* Load Segment Address Register */ |
| REG_FLD_MOD(HDMI_CORE_DDC_SEGM, ext/2, 7, 0); |
| |
| /* Load Slave Address Register */ |
| REG_FLD_MOD(HDMI_CORE_DDC_ADDR, 0xA0 >> 1, 7, 1); |
| |
| /* Load Offset Address Register */ |
| REG_FLD_MOD(HDMI_CORE_DDC_OFFSET, offset, 7, 0); |
| |
| /* Load Byte Count */ |
| REG_FLD_MOD(HDMI_CORE_DDC_COUNT1, 0x80, 7, 0); |
| REG_FLD_MOD(HDMI_CORE_DDC_COUNT2, 0x0, 1, 0); |
| |
| /* Set DDC_CMD */ |
| if (ext) |
| REG_FLD_MOD(HDMI_CORE_DDC_CMD, 0x4, 3, 0); |
| else |
| REG_FLD_MOD(HDMI_CORE_DDC_CMD, 0x2, 3, 0); |
| |
| /* HDMI_CORE_DDC_STATUS_BUS_LOW */ |
| if (REG_GET(HDMI_CORE_DDC_STATUS, 6, 6) == 1) { |
| DSSWARN("I2C Bus Low?\n"); |
| return -EIO; |
| } |
| /* HDMI_CORE_DDC_STATUS_NO_ACK */ |
| if (REG_GET(HDMI_CORE_DDC_STATUS, 5, 5) == 1) { |
| DSSWARN("I2C No Ack\n"); |
| return -EIO; |
| } |
| |
| i = ext * 128; |
| j = 0; |
| while (((REG_GET(HDMI_CORE_DDC_STATUS, 4, 4) == 1) || |
| (REG_GET(HDMI_CORE_DDC_STATUS, 2, 2) == 0)) && |
| j < 128) { |
| |
| if (REG_GET(HDMI_CORE_DDC_STATUS, 2, 2) == 0) { |
| /* FIFO not empty */ |
| pedid[i++] = REG_GET(HDMI_CORE_DDC_DATA, 7, 0); |
| j++; |
| } |
| } |
| |
| for (j = 0; j < 128; j++) |
| checksum += pedid[j]; |
| |
| if (checksum != 0) { |
| DSSERR("E-EDID checksum failed!!\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int read_edid(u8 *pedid, u16 max_length) |
| { |
| int r = 0, n = 0, i = 0; |
| int max_ext_blocks = (max_length / 128) - 1; |
| |
| r = hdmi_core_ddc_edid(pedid, 0); |
| if (r) { |
| return r; |
| } else { |
| n = pedid[0x7e]; |
| |
| /* |
| * README: need to comply with max_length set by the caller. |
| * Better implementation should be to allocate necessary |
| * memory to store EDID according to nb_block field found |
| * in first block |
| */ |
| if (n > max_ext_blocks) |
| n = max_ext_blocks; |
| |
| for (i = 1; i <= n; i++) { |
| r = hdmi_core_ddc_edid(pedid, i); |
| if (r) |
| return r; |
| } |
| } |
| return 0; |
| } |
| |
| static int get_timings_index(void) |
| { |
| int code; |
| |
| if (hdmi.mode == 0) |
| code = code_vesa[hdmi.code]; |
| else |
| code = code_cea[hdmi.code]; |
| |
| if (code == -1) { |
| /* HDMI code 4 corresponds to 640 * 480 VGA */ |
| hdmi.code = 4; |
| /* DVI mode 1 corresponds to HDMI 0 to DVI */ |
| hdmi.mode = HDMI_DVI; |
| |
| code = code_vesa[hdmi.code]; |
| } |
| return code; |
| } |
| |
| static struct hdmi_cm hdmi_get_code(struct omap_video_timings *timing) |
| { |
| int i = 0, code = -1, temp_vsync = 0, temp_hsync = 0; |
| int timing_vsync = 0, timing_hsync = 0; |
| struct omap_video_timings temp; |
| struct hdmi_cm cm = {-1}; |
| DSSDBG("hdmi_get_code\n"); |
| |
| for (i = 0; i < OMAP_HDMI_TIMINGS_NB; i++) { |
| temp = cea_vesa_timings[i].timings; |
| if ((temp.pixel_clock == timing->pixel_clock) && |
| (temp.x_res == timing->x_res) && |
| (temp.y_res == timing->y_res)) { |
| |
| temp_hsync = temp.hfp + temp.hsw + temp.hbp; |
| timing_hsync = timing->hfp + timing->hsw + timing->hbp; |
| temp_vsync = temp.vfp + temp.vsw + temp.vbp; |
| timing_vsync = timing->vfp + timing->vsw + timing->vbp; |
| |
| DSSDBG("temp_hsync = %d , temp_vsync = %d" |
| "timing_hsync = %d, timing_vsync = %d\n", |
| temp_hsync, temp_hsync, |
| timing_hsync, timing_vsync); |
| |
| if ((temp_hsync == timing_hsync) && |
| (temp_vsync == timing_vsync)) { |
| code = i; |
| cm.code = code_index[i]; |
| if (code < 14) |
| cm.mode = HDMI_HDMI; |
| else |
| cm.mode = HDMI_DVI; |
| DSSDBG("Hdmi_code = %d mode = %d\n", |
| cm.code, cm.mode); |
| break; |
| } |
| } |
| } |
| |
| return cm; |
| } |
| |
| static void get_horz_vert_timing_info(int current_descriptor_addrs, u8 *edid , |
| struct omap_video_timings *timings) |
| { |
| /* X and Y resolution */ |
| timings->x_res = (((edid[current_descriptor_addrs + 4] & 0xF0) << 4) | |
| edid[current_descriptor_addrs + 2]); |
| timings->y_res = (((edid[current_descriptor_addrs + 7] & 0xF0) << 4) | |
| edid[current_descriptor_addrs + 5]); |
| |
| timings->pixel_clock = ((edid[current_descriptor_addrs + 1] << 8) | |
| edid[current_descriptor_addrs]); |
| |
| timings->pixel_clock = 10 * timings->pixel_clock; |
| |
| /* HORIZONTAL FRONT PORCH */ |
| timings->hfp = edid[current_descriptor_addrs + 8] | |
| ((edid[current_descriptor_addrs + 11] & 0xc0) << 2); |
| /* HORIZONTAL SYNC WIDTH */ |
| timings->hsw = edid[current_descriptor_addrs + 9] | |
| ((edid[current_descriptor_addrs + 11] & 0x30) << 4); |
| /* HORIZONTAL BACK PORCH */ |
| timings->hbp = (((edid[current_descriptor_addrs + 4] & 0x0F) << 8) | |
| edid[current_descriptor_addrs + 3]) - |
| (timings->hfp + timings->hsw); |
| /* VERTICAL FRONT PORCH */ |
| timings->vfp = ((edid[current_descriptor_addrs + 10] & 0xF0) >> 4) | |
| ((edid[current_descriptor_addrs + 11] & 0x0f) << 2); |
| /* VERTICAL SYNC WIDTH */ |
| timings->vsw = (edid[current_descriptor_addrs + 10] & 0x0F) | |
| ((edid[current_descriptor_addrs + 11] & 0x03) << 4); |
| /* VERTICAL BACK PORCH */ |
| timings->vbp = (((edid[current_descriptor_addrs + 7] & 0x0F) << 8) | |
| edid[current_descriptor_addrs + 6]) - |
| (timings->vfp + timings->vsw); |
| |
| } |
| |
| /* Description : This function gets the resolution information from EDID */ |
| static void get_edid_timing_data(u8 *edid) |
| { |
| u8 count; |
| u16 current_descriptor_addrs; |
| struct hdmi_cm cm; |
| struct omap_video_timings edid_timings; |
| |
| /* search block 0, there are 4 DTDs arranged in priority order */ |
| for (count = 0; count < EDID_SIZE_BLOCK0_TIMING_DESCRIPTOR; count++) { |
| current_descriptor_addrs = |
| EDID_DESCRIPTOR_BLOCK0_ADDRESS + |
| count * EDID_TIMING_DESCRIPTOR_SIZE; |
| get_horz_vert_timing_info(current_descriptor_addrs, |
| edid, &edid_timings); |
| cm = hdmi_get_code(&edid_timings); |
| DSSDBG("Block0[%d] value matches code = %d , mode = %d\n", |
| count, cm.code, cm.mode); |
| if (cm.code == -1) { |
| continue; |
| } else { |
| hdmi.code = cm.code; |
| hdmi.mode = cm.mode; |
| DSSDBG("code = %d , mode = %d\n", |
| hdmi.code, hdmi.mode); |
| return; |
| } |
| } |
| if (edid[0x7e] != 0x00) { |
| for (count = 0; count < EDID_SIZE_BLOCK1_TIMING_DESCRIPTOR; |
| count++) { |
| current_descriptor_addrs = |
| EDID_DESCRIPTOR_BLOCK1_ADDRESS + |
| count * EDID_TIMING_DESCRIPTOR_SIZE; |
| get_horz_vert_timing_info(current_descriptor_addrs, |
| edid, &edid_timings); |
| cm = hdmi_get_code(&edid_timings); |
| DSSDBG("Block1[%d] value matches code = %d, mode = %d", |
| count, cm.code, cm.mode); |
| if (cm.code == -1) { |
| continue; |
| } else { |
| hdmi.code = cm.code; |
| hdmi.mode = cm.mode; |
| DSSDBG("code = %d , mode = %d\n", |
| hdmi.code, hdmi.mode); |
| return; |
| } |
| } |
| } |
| |
| DSSINFO("no valid timing found , falling back to VGA\n"); |
| hdmi.code = 4; /* setting default value of 640 480 VGA */ |
| hdmi.mode = HDMI_DVI; |
| } |
| |
| static void hdmi_read_edid(struct omap_video_timings *dp) |
| { |
| int ret = 0, code; |
| |
| memset(hdmi.edid, 0, HDMI_EDID_MAX_LENGTH); |
| |
| if (!hdmi.edid_set) |
| ret = read_edid(hdmi.edid, HDMI_EDID_MAX_LENGTH); |
| |
| if (!ret) { |
| if (!memcmp(hdmi.edid, edid_header, sizeof(edid_header))) { |
| /* search for timings of default resolution */ |
| get_edid_timing_data(hdmi.edid); |
| hdmi.edid_set = true; |
| } |
| } else { |
| DSSWARN("failed to read E-EDID\n"); |
| } |
| |
| if (!hdmi.edid_set) { |
| DSSINFO("fallback to VGA\n"); |
| hdmi.code = 4; /* setting default value of 640 480 VGA */ |
| hdmi.mode = HDMI_DVI; |
| } |
| |
| code = get_timings_index(); |
| |
| *dp = cea_vesa_timings[code].timings; |
| } |
| |
| static void hdmi_core_init(struct hdmi_core_video_config *video_cfg, |
| struct hdmi_core_infoframe_avi *avi_cfg, |
| struct hdmi_core_packet_enable_repeat *repeat_cfg) |
| { |
| DSSDBG("Enter hdmi_core_init\n"); |
| |
| /* video core */ |
| video_cfg->ip_bus_width = HDMI_INPUT_8BIT; |
| video_cfg->op_dither_truc = HDMI_OUTPUTTRUNCATION_8BIT; |
| video_cfg->deep_color_pkt = HDMI_DEEPCOLORPACKECTDISABLE; |
| video_cfg->pkt_mode = HDMI_PACKETMODERESERVEDVALUE; |
| video_cfg->hdmi_dvi = HDMI_DVI; |
| video_cfg->tclk_sel_clkmult = HDMI_FPLL10IDCK; |
| |
| /* info frame */ |
| avi_cfg->db1_format = 0; |
| avi_cfg->db1_active_info = 0; |
| avi_cfg->db1_bar_info_dv = 0; |
| avi_cfg->db1_scan_info = 0; |
| avi_cfg->db2_colorimetry = 0; |
| avi_cfg->db2_aspect_ratio = 0; |
| avi_cfg->db2_active_fmt_ar = 0; |
| avi_cfg->db3_itc = 0; |
| avi_cfg->db3_ec = 0; |
| avi_cfg->db3_q_range = 0; |
| avi_cfg->db3_nup_scaling = 0; |
| avi_cfg->db4_videocode = 0; |
| avi_cfg->db5_pixel_repeat = 0; |
| avi_cfg->db6_7_line_eoftop = 0 ; |
| avi_cfg->db8_9_line_sofbottom = 0; |
| avi_cfg->db10_11_pixel_eofleft = 0; |
| avi_cfg->db12_13_pixel_sofright = 0; |
| |
| /* packet enable and repeat */ |
| repeat_cfg->audio_pkt = 0; |
| repeat_cfg->audio_pkt_repeat = 0; |
| repeat_cfg->avi_infoframe = 0; |
| repeat_cfg->avi_infoframe_repeat = 0; |
| repeat_cfg->gen_cntrl_pkt = 0; |
| repeat_cfg->gen_cntrl_pkt_repeat = 0; |
| repeat_cfg->generic_pkt = 0; |
| repeat_cfg->generic_pkt_repeat = 0; |
| } |
| |
| static void hdmi_core_powerdown_disable(void) |
| { |
| DSSDBG("Enter hdmi_core_powerdown_disable\n"); |
| REG_FLD_MOD(HDMI_CORE_CTRL1, 0x0, 0, 0); |
| } |
| |
| static void hdmi_core_swreset_release(void) |
| { |
| DSSDBG("Enter hdmi_core_swreset_release\n"); |
| REG_FLD_MOD(HDMI_CORE_SYS_SRST, 0x0, 0, 0); |
| } |
| |
| static void hdmi_core_swreset_assert(void) |
| { |
| DSSDBG("Enter hdmi_core_swreset_assert\n"); |
| REG_FLD_MOD(HDMI_CORE_SYS_SRST, 0x1, 0, 0); |
| } |
| |
| /* DSS_HDMI_CORE_VIDEO_CONFIG */ |
| static void hdmi_core_video_config(struct hdmi_core_video_config *cfg) |
| { |
| u32 r = 0; |
| |
| /* sys_ctrl1 default configuration not tunable */ |
| r = hdmi_read_reg(HDMI_CORE_CTRL1); |
| r = FLD_MOD(r, HDMI_CORE_CTRL1_VEN_FOLLOWVSYNC, 5, 5); |
| r = FLD_MOD(r, HDMI_CORE_CTRL1_HEN_FOLLOWHSYNC, 4, 4); |
| r = FLD_MOD(r, HDMI_CORE_CTRL1_BSEL_24BITBUS, 2, 2); |
| r = FLD_MOD(r, HDMI_CORE_CTRL1_EDGE_RISINGEDGE, 1, 1); |
| hdmi_write_reg(HDMI_CORE_CTRL1, r); |
| |
| REG_FLD_MOD(HDMI_CORE_SYS_VID_ACEN, cfg->ip_bus_width, 7, 6); |
| |
| /* Vid_Mode */ |
| r = hdmi_read_reg(HDMI_CORE_SYS_VID_MODE); |
| |
| /* dither truncation configuration */ |
| if (cfg->op_dither_truc > HDMI_OUTPUTTRUNCATION_12BIT) { |
| r = FLD_MOD(r, cfg->op_dither_truc - 3, 7, 6); |
| r = FLD_MOD(r, 1, 5, 5); |
| } else { |
| r = FLD_MOD(r, cfg->op_dither_truc, 7, 6); |
| r = FLD_MOD(r, 0, 5, 5); |
| } |
| hdmi_write_reg(HDMI_CORE_SYS_VID_MODE, r); |
| |
| /* HDMI_Ctrl */ |
| r = hdmi_read_reg(HDMI_CORE_AV_HDMI_CTRL); |
| r = FLD_MOD(r, cfg->deep_color_pkt, 6, 6); |
| r = FLD_MOD(r, cfg->pkt_mode, 5, 3); |
| r = FLD_MOD(r, cfg->hdmi_dvi, 0, 0); |
| hdmi_write_reg(HDMI_CORE_AV_HDMI_CTRL, r); |
| |
| /* TMDS_CTRL */ |
| REG_FLD_MOD(HDMI_CORE_SYS_TMDS_CTRL, |
| cfg->tclk_sel_clkmult, 6, 5); |
| } |
| |
| static void hdmi_core_aux_infoframe_avi_config( |
| struct hdmi_core_infoframe_avi info_avi) |
| { |
| u32 val; |
| char sum = 0, checksum = 0; |
| |
| sum += 0x82 + 0x002 + 0x00D; |
| hdmi_write_reg(HDMI_CORE_AV_AVI_TYPE, 0x082); |
| hdmi_write_reg(HDMI_CORE_AV_AVI_VERS, 0x002); |
| hdmi_write_reg(HDMI_CORE_AV_AVI_LEN, 0x00D); |
| |
| val = (info_avi.db1_format << 5) | |
| (info_avi.db1_active_info << 4) | |
| (info_avi.db1_bar_info_dv << 2) | |
| (info_avi.db1_scan_info); |
| hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(0), val); |
| sum += val; |
| |
| val = (info_avi.db2_colorimetry << 6) | |
| (info_avi.db2_aspect_ratio << 4) | |
| (info_avi.db2_active_fmt_ar); |
| hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(1), val); |
| sum += val; |
| |
| val = (info_avi.db3_itc << 7) | |
| (info_avi.db3_ec << 4) | |
| (info_avi.db3_q_range << 2) | |
| (info_avi.db3_nup_scaling); |
| hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(2), val); |
| sum += val; |
| |
| hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(3), info_avi.db4_videocode); |
| sum += info_avi.db4_videocode; |
| |
| val = info_avi.db5_pixel_repeat; |
| hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(4), val); |
| sum += val; |
| |
| val = info_avi.db6_7_line_eoftop & 0x00FF; |
| hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(5), val); |
| sum += val; |
| |
| val = ((info_avi.db6_7_line_eoftop >> 8) & 0x00FF); |
| hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(6), val); |
| sum += val; |
| |
| val = info_avi.db8_9_line_sofbottom & 0x00FF; |
| hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(7), val); |
| sum += val; |
| |
| val = ((info_avi.db8_9_line_sofbottom >> 8) & 0x00FF); |
| hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(8), val); |
| sum += val; |
| |
| val = info_avi.db10_11_pixel_eofleft & 0x00FF; |
| hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(9), val); |
| sum += val; |
| |
| val = ((info_avi.db10_11_pixel_eofleft >> 8) & 0x00FF); |
| hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(10), val); |
| sum += val; |
| |
| val = info_avi.db12_13_pixel_sofright & 0x00FF; |
| hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(11), val); |
| sum += val; |
| |
| val = ((info_avi.db12_13_pixel_sofright >> 8) & 0x00FF); |
| hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(12), val); |
| sum += val; |
| |
| checksum = 0x100 - sum; |
| hdmi_write_reg(HDMI_CORE_AV_AVI_CHSUM, checksum); |
| } |
| |
| static void hdmi_core_av_packet_config( |
| struct hdmi_core_packet_enable_repeat repeat_cfg) |
| { |
| /* enable/repeat the infoframe */ |
| hdmi_write_reg(HDMI_CORE_AV_PB_CTRL1, |
| (repeat_cfg.audio_pkt << 5) | |
| (repeat_cfg.audio_pkt_repeat << 4) | |
| (repeat_cfg.avi_infoframe << 1) | |
| (repeat_cfg.avi_infoframe_repeat)); |
| |
| /* enable/repeat the packet */ |
| hdmi_write_reg(HDMI_CORE_AV_PB_CTRL2, |
| (repeat_cfg.gen_cntrl_pkt << 3) | |
| (repeat_cfg.gen_cntrl_pkt_repeat << 2) | |
| (repeat_cfg.generic_pkt << 1) | |
| (repeat_cfg.generic_pkt_repeat)); |
| } |
| |
| static void hdmi_wp_init(struct omap_video_timings *timings, |
| struct hdmi_video_format *video_fmt, |
| struct hdmi_video_interface *video_int) |
| { |
| DSSDBG("Enter hdmi_wp_init\n"); |
| |
| timings->hbp = 0; |
| timings->hfp = 0; |
| timings->hsw = 0; |
| timings->vbp = 0; |
| timings->vfp = 0; |
| timings->vsw = 0; |
| |
| video_fmt->packing_mode = HDMI_PACK_10b_RGB_YUV444; |
| video_fmt->y_res = 0; |
| video_fmt->x_res = 0; |
| |
| video_int->vsp = 0; |
| video_int->hsp = 0; |
| |
| video_int->interlacing = 0; |
| video_int->tm = 0; /* HDMI_TIMING_SLAVE */ |
| |
| } |
| |
| static void hdmi_wp_video_start(bool start) |
| { |
| REG_FLD_MOD(HDMI_WP_VIDEO_CFG, start, 31, 31); |
| } |
| |
| static void hdmi_wp_video_init_format(struct hdmi_video_format *video_fmt, |
| struct omap_video_timings *timings, struct hdmi_config *param) |
| { |
| DSSDBG("Enter hdmi_wp_video_init_format\n"); |
| |
| video_fmt->y_res = param->timings.timings.y_res; |
| video_fmt->x_res = param->timings.timings.x_res; |
| |
| timings->hbp = param->timings.timings.hbp; |
| timings->hfp = param->timings.timings.hfp; |
| timings->hsw = param->timings.timings.hsw; |
| timings->vbp = param->timings.timings.vbp; |
| timings->vfp = param->timings.timings.vfp; |
| timings->vsw = param->timings.timings.vsw; |
| } |
| |
| static void hdmi_wp_video_config_format( |
| struct hdmi_video_format *video_fmt) |
| { |
| u32 l = 0; |
| |
| REG_FLD_MOD(HDMI_WP_VIDEO_CFG, video_fmt->packing_mode, 10, 8); |
| |
| l |= FLD_VAL(video_fmt->y_res, 31, 16); |
| l |= FLD_VAL(video_fmt->x_res, 15, 0); |
| hdmi_write_reg(HDMI_WP_VIDEO_SIZE, l); |
| } |
| |
| static void hdmi_wp_video_config_interface( |
| struct hdmi_video_interface *video_int) |
| { |
| u32 r; |
| DSSDBG("Enter hdmi_wp_video_config_interface\n"); |
| |
| r = hdmi_read_reg(HDMI_WP_VIDEO_CFG); |
| r = FLD_MOD(r, video_int->vsp, 7, 7); |
| r = FLD_MOD(r, video_int->hsp, 6, 6); |
| r = FLD_MOD(r, video_int->interlacing, 3, 3); |
| r = FLD_MOD(r, video_int->tm, 1, 0); |
| hdmi_write_reg(HDMI_WP_VIDEO_CFG, r); |
| } |
| |
| static void hdmi_wp_video_config_timing( |
| struct omap_video_timings *timings) |
| { |
| u32 timing_h = 0; |
| u32 timing_v = 0; |
| |
| DSSDBG("Enter hdmi_wp_video_config_timing\n"); |
| |
| timing_h |= FLD_VAL(timings->hbp, 31, 20); |
| timing_h |= FLD_VAL(timings->hfp, 19, 8); |
| timing_h |= FLD_VAL(timings->hsw, 7, 0); |
| hdmi_write_reg(HDMI_WP_VIDEO_TIMING_H, timing_h); |
| |
| timing_v |= FLD_VAL(timings->vbp, 31, 20); |
| timing_v |= FLD_VAL(timings->vfp, 19, 8); |
| timing_v |= FLD_VAL(timings->vsw, 7, 0); |
| hdmi_write_reg(HDMI_WP_VIDEO_TIMING_V, timing_v); |
| } |
| |
| static void hdmi_basic_configure(struct hdmi_config *cfg) |
| { |
| /* HDMI */ |
| struct omap_video_timings video_timing; |
| struct hdmi_video_format video_format; |
| struct hdmi_video_interface video_interface; |
| /* HDMI core */ |
| struct hdmi_core_infoframe_avi avi_cfg; |
| struct hdmi_core_video_config v_core_cfg; |
| struct hdmi_core_packet_enable_repeat repeat_cfg; |
| |
| hdmi_wp_init(&video_timing, &video_format, |
| &video_interface); |
| |
| hdmi_core_init(&v_core_cfg, |
| &avi_cfg, |
| &repeat_cfg); |
| |
| hdmi_wp_video_init_format(&video_format, |
| &video_timing, cfg); |
| |
| hdmi_wp_video_config_timing(&video_timing); |
| |
| /* video config */ |
| video_format.packing_mode = HDMI_PACK_24b_RGB_YUV444_YUV422; |
| |
| hdmi_wp_video_config_format(&video_format); |
| |
| video_interface.vsp = cfg->timings.vsync_pol; |
| video_interface.hsp = cfg->timings.hsync_pol; |
| video_interface.interlacing = cfg->interlace; |
| video_interface.tm = 1 ; /* HDMI_TIMING_MASTER_24BIT */ |
| |
| hdmi_wp_video_config_interface(&video_interface); |
| |
| /* |
| * configure core video part |
| * set software reset in the core |
| */ |
| hdmi_core_swreset_assert(); |
| |
| /* power down off */ |
| hdmi_core_powerdown_disable(); |
| |
| v_core_cfg.pkt_mode = HDMI_PACKETMODE24BITPERPIXEL; |
| v_core_cfg.hdmi_dvi = cfg->cm.mode; |
| |
| hdmi_core_video_config(&v_core_cfg); |
| |
| /* release software reset in the core */ |
| hdmi_core_swreset_release(); |
| |
| /* |
| * configure packet |
| * info frame video see doc CEA861-D page 65 |
| */ |
| avi_cfg.db1_format = HDMI_INFOFRAME_AVI_DB1Y_RGB; |
| avi_cfg.db1_active_info = |
| HDMI_INFOFRAME_AVI_DB1A_ACTIVE_FORMAT_OFF; |
| avi_cfg.db1_bar_info_dv = HDMI_INFOFRAME_AVI_DB1B_NO; |
| avi_cfg.db1_scan_info = HDMI_INFOFRAME_AVI_DB1S_0; |
| avi_cfg.db2_colorimetry = HDMI_INFOFRAME_AVI_DB2C_NO; |
| avi_cfg.db2_aspect_ratio = HDMI_INFOFRAME_AVI_DB2M_NO; |
| avi_cfg.db2_active_fmt_ar = HDMI_INFOFRAME_AVI_DB2R_SAME; |
| avi_cfg.db3_itc = HDMI_INFOFRAME_AVI_DB3ITC_NO; |
| avi_cfg.db3_ec = HDMI_INFOFRAME_AVI_DB3EC_XVYUV601; |
| avi_cfg.db3_q_range = HDMI_INFOFRAME_AVI_DB3Q_DEFAULT; |
| avi_cfg.db3_nup_scaling = HDMI_INFOFRAME_AVI_DB3SC_NO; |
| avi_cfg.db4_videocode = cfg->cm.code; |
| avi_cfg.db5_pixel_repeat = HDMI_INFOFRAME_AVI_DB5PR_NO; |
| avi_cfg.db6_7_line_eoftop = 0; |
| avi_cfg.db8_9_line_sofbottom = 0; |
| avi_cfg.db10_11_pixel_eofleft = 0; |
| avi_cfg.db12_13_pixel_sofright = 0; |
| |
| hdmi_core_aux_infoframe_avi_config(avi_cfg); |
| |
| /* enable/repeat the infoframe */ |
| repeat_cfg.avi_infoframe = HDMI_PACKETENABLE; |
| repeat_cfg.avi_infoframe_repeat = HDMI_PACKETREPEATON; |
| /* wakeup */ |
| repeat_cfg.audio_pkt = HDMI_PACKETENABLE; |
| repeat_cfg.audio_pkt_repeat = HDMI_PACKETREPEATON; |
| hdmi_core_av_packet_config(repeat_cfg); |
| } |
| |
| static void update_hdmi_timings(struct hdmi_config *cfg, |
| struct omap_video_timings *timings, int code) |
| { |
| cfg->timings.timings.x_res = timings->x_res; |
| cfg->timings.timings.y_res = timings->y_res; |
| cfg->timings.timings.hbp = timings->hbp; |
| cfg->timings.timings.hfp = timings->hfp; |
| cfg->timings.timings.hsw = timings->hsw; |
| cfg->timings.timings.vbp = timings->vbp; |
| cfg->timings.timings.vfp = timings->vfp; |
| cfg->timings.timings.vsw = timings->vsw; |
| cfg->timings.timings.pixel_clock = timings->pixel_clock; |
| cfg->timings.vsync_pol = cea_vesa_timings[code].vsync_pol; |
| cfg->timings.hsync_pol = cea_vesa_timings[code].hsync_pol; |
| } |
| |
| static void hdmi_compute_pll(unsigned long clkin, int phy, |
| int n, struct hdmi_pll_info *pi) |
| { |
| unsigned long refclk; |
| u32 mf; |
| |
| /* |
| * Input clock is predivided by N + 1 |
| * out put of which is reference clk |
| */ |
| refclk = clkin / (n + 1); |
| pi->regn = n; |
| |
| /* |
| * multiplier is pixel_clk/ref_clk |
| * Multiplying by 100 to avoid fractional part removal |
| */ |
| pi->regm = (phy * 100/(refclk))/100; |
| pi->regm2 = 1; |
| |
| /* |
| * fractional multiplier is remainder of the difference between |
| * multiplier and actual phy(required pixel clock thus should be |
| * multiplied by 2^18(262144) divided by the reference clock |
| */ |
| mf = (phy - pi->regm * refclk) * 262144; |
| pi->regmf = mf/(refclk); |
| |
| /* |
| * Dcofreq should be set to 1 if required pixel clock |
| * is greater than 1000MHz |
| */ |
| pi->dcofreq = phy > 1000 * 100; |
| pi->regsd = ((pi->regm * clkin / 10) / ((n + 1) * 250) + 5) / 10; |
| |
| DSSDBG("M = %d Mf = %d\n", pi->regm, pi->regmf); |
| DSSDBG("range = %d sd = %d\n", pi->dcofreq, pi->regsd); |
| } |
| |
| static void hdmi_enable_clocks(int enable) |
| { |
| if (enable) |
| dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK | |
| DSS_CLK_SYSCK | DSS_CLK_VIDFCK); |
| else |
| dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK | |
| DSS_CLK_SYSCK | DSS_CLK_VIDFCK); |
| } |
| |
| static int hdmi_power_on(struct omap_dss_device *dssdev) |
| { |
| int r, code = 0; |
| struct hdmi_pll_info pll_data; |
| struct omap_video_timings *p; |
| int clkin, n, phy; |
| |
| hdmi_enable_clocks(1); |
| |
| dispc_enable_channel(OMAP_DSS_CHANNEL_DIGIT, 0); |
| |
| p = &dssdev->panel.timings; |
| |
| DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", |
| dssdev->panel.timings.x_res, |
| dssdev->panel.timings.y_res); |
| |
| if (!hdmi.custom_set) { |
| DSSDBG("Read EDID as no EDID is not set on poweron\n"); |
| hdmi_read_edid(p); |
| } |
| code = get_timings_index(); |
| dssdev->panel.timings = cea_vesa_timings[code].timings; |
| update_hdmi_timings(&hdmi.cfg, p, code); |
| |
| clkin = 3840; /* 38.4 MHz */ |
| n = 15; /* this is a constant for our math */ |
| phy = p->pixel_clock; |
| |
| hdmi_compute_pll(clkin, phy, n, &pll_data); |
| |
| hdmi_wp_video_start(0); |
| |
| /* config the PLL and PHY first */ |
| r = hdmi_pll_program(&pll_data); |
| if (r) { |
| DSSDBG("Failed to lock PLL\n"); |
| goto err; |
| } |
| |
| r = hdmi_phy_init(); |
| if (r) { |
| DSSDBG("Failed to start PHY\n"); |
| goto err; |
| } |
| |
| hdmi.cfg.cm.mode = hdmi.mode; |
| hdmi.cfg.cm.code = hdmi.code; |
| hdmi_basic_configure(&hdmi.cfg); |
| |
| /* Make selection of HDMI in DSS */ |
| dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK); |
| |
| /* Select the dispc clock source as PRCM clock, to ensure that it is not |
| * DSI PLL source as the clock selected by DSI PLL might not be |
| * sufficient for the resolution selected / that can be changed |
| * dynamically by user. This can be moved to single location , say |
| * Boardfile. |
| */ |
| dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK); |
| |
| /* bypass TV gamma table */ |
| dispc_enable_gamma_table(0); |
| |
| /* tv size */ |
| dispc_set_digit_size(dssdev->panel.timings.x_res, |
| dssdev->panel.timings.y_res); |
| |
| dispc_enable_channel(OMAP_DSS_CHANNEL_DIGIT, 1); |
| |
| hdmi_wp_video_start(1); |
| |
| return 0; |
| err: |
| hdmi_enable_clocks(0); |
| return -EIO; |
| } |
| |
| static void hdmi_power_off(struct omap_dss_device *dssdev) |
| { |
| dispc_enable_channel(OMAP_DSS_CHANNEL_DIGIT, 0); |
| |
| hdmi_wp_video_start(0); |
| hdmi_phy_off(); |
| hdmi_set_pll_pwr(HDMI_PLLPWRCMD_ALLOFF); |
| hdmi_enable_clocks(0); |
| |
| hdmi.edid_set = 0; |
| } |
| |
| int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev, |
| struct omap_video_timings *timings) |
| { |
| struct hdmi_cm cm; |
| |
| cm = hdmi_get_code(timings); |
| if (cm.code == -1) { |
| DSSERR("Invalid timing entered\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| |
| } |
| |
| void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev) |
| { |
| struct hdmi_cm cm; |
| |
| hdmi.custom_set = 1; |
| cm = hdmi_get_code(&dssdev->panel.timings); |
| hdmi.code = cm.code; |
| hdmi.mode = cm.mode; |
| omapdss_hdmi_display_enable(dssdev); |
| hdmi.custom_set = 0; |
| } |
| |
| int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev) |
| { |
| int r = 0; |
| |
| DSSDBG("ENTER hdmi_display_enable\n"); |
| |
| mutex_lock(&hdmi.lock); |
| |
| r = omap_dss_start_device(dssdev); |
| if (r) { |
| DSSERR("failed to start device\n"); |
| goto err0; |
| } |
| |
| if (dssdev->platform_enable) { |
| r = dssdev->platform_enable(dssdev); |
| if (r) { |
| DSSERR("failed to enable GPIO's\n"); |
| goto err1; |
| } |
| } |
| |
| r = hdmi_power_on(dssdev); |
| if (r) { |
| DSSERR("failed to power on device\n"); |
| goto err2; |
| } |
| |
| mutex_unlock(&hdmi.lock); |
| return 0; |
| |
| err2: |
| if (dssdev->platform_disable) |
| dssdev->platform_disable(dssdev); |
| err1: |
| omap_dss_stop_device(dssdev); |
| err0: |
| mutex_unlock(&hdmi.lock); |
| return r; |
| } |
| |
| void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev) |
| { |
| DSSDBG("Enter hdmi_display_disable\n"); |
| |
| mutex_lock(&hdmi.lock); |
| |
| hdmi_power_off(dssdev); |
| |
| if (dssdev->platform_disable) |
| dssdev->platform_disable(dssdev); |
| |
| omap_dss_stop_device(dssdev); |
| |
| mutex_unlock(&hdmi.lock); |
| } |
| |
| /* HDMI HW IP initialisation */ |
| static int omapdss_hdmihw_probe(struct platform_device *pdev) |
| { |
| struct resource *hdmi_mem; |
| |
| hdmi.pdata = pdev->dev.platform_data; |
| hdmi.pdev = pdev; |
| |
| mutex_init(&hdmi.lock); |
| |
| hdmi_mem = platform_get_resource(hdmi.pdev, IORESOURCE_MEM, 0); |
| if (!hdmi_mem) { |
| DSSERR("can't get IORESOURCE_MEM HDMI\n"); |
| return -EINVAL; |
| } |
| |
| /* Base address taken from platform */ |
| hdmi.base_wp = ioremap(hdmi_mem->start, resource_size(hdmi_mem)); |
| if (!hdmi.base_wp) { |
| DSSERR("can't ioremap WP\n"); |
| return -ENOMEM; |
| } |
| |
| hdmi_panel_init(); |
| |
| return 0; |
| } |
| |
| static int omapdss_hdmihw_remove(struct platform_device *pdev) |
| { |
| hdmi_panel_exit(); |
| |
| iounmap(hdmi.base_wp); |
| |
| return 0; |
| } |
| |
| static struct platform_driver omapdss_hdmihw_driver = { |
| .probe = omapdss_hdmihw_probe, |
| .remove = omapdss_hdmihw_remove, |
| .driver = { |
| .name = "omapdss_hdmi", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| int hdmi_init_platform_driver(void) |
| { |
| return platform_driver_register(&omapdss_hdmihw_driver); |
| } |
| |
| void hdmi_uninit_platform_driver(void) |
| { |
| return platform_driver_unregister(&omapdss_hdmihw_driver); |
| } |