V4L/DVB (8720): gspca: V4L2_CAP_SENSOR_UPSIDE_DOWN added as a cap for some webcams.
This patch adds a V4L2_CAP_SENSOR_UPSIDE_DOWN flag to the capabilities flags,
and sets this flag for the Philips SPC200NC cam (which has its sensor installed
upside down). The same flag is also needed and added for the Philips SPC300NC.
Together with a patch to libv4l which adds flipping the image in software this
fixes the upside down display with the SPC200NC cam.
Signed-of-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 061e191..3461bc9 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -851,6 +851,8 @@
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
| V4L2_CAP_STREAMING
| V4L2_CAP_READWRITE;
+ if (gspca_dev->flags & GSPCA_SENSOR_UPSIDE_DOWN_FLAG)
+ cap->capabilities |= V4L2_CAP_SENSOR_UPSIDE_DOWN;
return 0;
}
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 2596568..1920c99 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -118,6 +118,9 @@
struct v4l2_buffer v4l2_buf;
};
+/* defines for the flags member */
+#define GSPCA_SENSOR_UPSIDE_DOWN_FLAG 0x01
+
struct gspca_dev {
struct video_device vdev; /* !! must be the first item */
struct file_operations fops;
@@ -163,6 +166,7 @@
char nurbs; /* number of allocated URBs */
char memory; /* memory type (V4L2_MEMORY_xxx) */
__u8 nbalt; /* number of USB alternate settings */
+ __u8 flags; /* see GSPCA_XXX_FLAG defines */
};
int gspca_dev_probe(struct usb_interface *intf,
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 79436f2..f1d8c7a 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -70,6 +70,10 @@
unsigned short chip_revision;
};
+#define DRIVER_INFO(sensor, flags) .driver_info = ((sensor) << 8) | (flags)
+#define DRIVER_INFO_GET_SENSOR(driver_info) ((driver_info) >> 8)
+#define DRIVER_INFO_GET_FLAGS(driver_info) ((driver_info) & 0xff)
+
/* V4L2 controls supported by the driver */
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
@@ -7015,7 +7019,8 @@
/* define some sensors from the vendor/product */
sd->sharpness = 2;
- sd->sensor = id->driver_info;
+ sd->sensor = DRIVER_INFO_GET_SENSOR(id->driver_info);
+ gspca_dev->flags = DRIVER_INFO_GET_FLAGS(id->driver_info);
sensor = zcxx_probeSensor(gspca_dev);
if (sensor >= 0)
PDEBUG(D_PROBE, "probe sensor -> %02x", sensor);
@@ -7505,19 +7510,19 @@
{USB_DEVICE(0x041e, 0x041e)},
#ifndef CONFIG_USB_ZC0301
{USB_DEVICE(0x041e, 0x4017)},
- {USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106},
+ {USB_DEVICE(0x041e, 0x401c), DRIVER_INFO(SENSOR_PAS106, 0)},
{USB_DEVICE(0x041e, 0x401e)},
{USB_DEVICE(0x041e, 0x401f)},
#endif
{USB_DEVICE(0x041e, 0x4029)},
#ifndef CONFIG_USB_ZC0301
- {USB_DEVICE(0x041e, 0x4034), .driver_info = SENSOR_PAS106},
- {USB_DEVICE(0x041e, 0x4035), .driver_info = SENSOR_PAS106},
+ {USB_DEVICE(0x041e, 0x4034), DRIVER_INFO(SENSOR_PAS106, 0)},
+ {USB_DEVICE(0x041e, 0x4035), DRIVER_INFO(SENSOR_PAS106, 0)},
{USB_DEVICE(0x041e, 0x4036)},
{USB_DEVICE(0x041e, 0x403a)},
#endif
- {USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_TAS5130C_VF0250},
- {USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250},
+ {USB_DEVICE(0x041e, 0x4051), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)},
+ {USB_DEVICE(0x041e, 0x4053), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)},
#ifndef CONFIG_USB_ZC0301
{USB_DEVICE(0x0458, 0x7007)},
{USB_DEVICE(0x0458, 0x700c)},
@@ -7543,11 +7548,13 @@
{USB_DEVICE(0x046d, 0x08d9)},
{USB_DEVICE(0x046d, 0x08d8)},
{USB_DEVICE(0x046d, 0x08da)},
- {USB_DEVICE(0x046d, 0x08dd), .driver_info = SENSOR_MC501CB},
- {USB_DEVICE(0x0471, 0x0325), .driver_info = SENSOR_PAS106},
- {USB_DEVICE(0x0471, 0x0326), .driver_info = SENSOR_PAS106},
- {USB_DEVICE(0x0471, 0x032d), .driver_info = SENSOR_PAS106},
- {USB_DEVICE(0x0471, 0x032e), .driver_info = SENSOR_PAS106},
+ {USB_DEVICE(0x046d, 0x08dd), DRIVER_INFO(SENSOR_MC501CB, 0)},
+ {USB_DEVICE(0x0471, 0x0325), DRIVER_INFO(SENSOR_PAS106,
+ GSPCA_SENSOR_UPSIDE_DOWN_FLAG)},
+ {USB_DEVICE(0x0471, 0x0326), DRIVER_INFO(SENSOR_PAS106,
+ GSPCA_SENSOR_UPSIDE_DOWN_FLAG)},
+ {USB_DEVICE(0x0471, 0x032d), DRIVER_INFO(SENSOR_PAS106, 0)},
+ {USB_DEVICE(0x0471, 0x032e), DRIVER_INFO(SENSOR_PAS106, 0)},
{USB_DEVICE(0x055f, 0xc005)},
#ifndef CONFIG_USB_ZC0301
{USB_DEVICE(0x055f, 0xd003)},
@@ -7559,7 +7566,7 @@
{USB_DEVICE(0x0ac8, 0x301b)},
{USB_DEVICE(0x0ac8, 0x303b)},
#endif
- {USB_DEVICE(0x0ac8, 0x305b), .driver_info = SENSOR_TAS5130C_VF0250},
+ {USB_DEVICE(0x0ac8, 0x305b), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)},
#ifndef CONFIG_USB_ZC0301
{USB_DEVICE(0x0ac8, 0x307b)},
{USB_DEVICE(0x10fd, 0x0128)},