| /* |
| * Copyright © 2012 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| * Authors: |
| * Eugeni Dodonov <eugeni.dodonov@intel.com> |
| * |
| */ |
| |
| #include "i915_drv.h" |
| #include "intel_drv.h" |
| |
| struct ddi_buf_trans { |
| u32 trans1; /* balance leg enable, de-emph level */ |
| u32 trans2; /* vref sel, vswing */ |
| u8 i_boost; /* SKL: I_boost; valid: 0x0, 0x1, 0x3, 0x7 */ |
| }; |
| |
| static const u8 index_to_dp_signal_levels[] = { |
| [0] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0, |
| [1] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1, |
| [2] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2, |
| [3] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3, |
| [4] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0, |
| [5] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1, |
| [6] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2, |
| [7] = DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0, |
| [8] = DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1, |
| [9] = DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0, |
| }; |
| |
| /* HDMI/DVI modes ignore everything but the last 2 items. So we share |
| * them for both DP and FDI transports, allowing those ports to |
| * automatically adapt to HDMI connections as well |
| */ |
| static const struct ddi_buf_trans hsw_ddi_translations_dp[] = { |
| { 0x00FFFFFF, 0x0006000E, 0x0 }, |
| { 0x00D75FFF, 0x0005000A, 0x0 }, |
| { 0x00C30FFF, 0x00040006, 0x0 }, |
| { 0x80AAAFFF, 0x000B0000, 0x0 }, |
| { 0x00FFFFFF, 0x0005000A, 0x0 }, |
| { 0x00D75FFF, 0x000C0004, 0x0 }, |
| { 0x80C30FFF, 0x000B0000, 0x0 }, |
| { 0x00FFFFFF, 0x00040006, 0x0 }, |
| { 0x80D75FFF, 0x000B0000, 0x0 }, |
| }; |
| |
| static const struct ddi_buf_trans hsw_ddi_translations_fdi[] = { |
| { 0x00FFFFFF, 0x0007000E, 0x0 }, |
| { 0x00D75FFF, 0x000F000A, 0x0 }, |
| { 0x00C30FFF, 0x00060006, 0x0 }, |
| { 0x00AAAFFF, 0x001E0000, 0x0 }, |
| { 0x00FFFFFF, 0x000F000A, 0x0 }, |
| { 0x00D75FFF, 0x00160004, 0x0 }, |
| { 0x00C30FFF, 0x001E0000, 0x0 }, |
| { 0x00FFFFFF, 0x00060006, 0x0 }, |
| { 0x00D75FFF, 0x001E0000, 0x0 }, |
| }; |
| |
| static const struct ddi_buf_trans hsw_ddi_translations_hdmi[] = { |
| /* Idx NT mV d T mV d db */ |
| { 0x00FFFFFF, 0x0006000E, 0x0 },/* 0: 400 400 0 */ |
| { 0x00E79FFF, 0x000E000C, 0x0 },/* 1: 400 500 2 */ |
| { 0x00D75FFF, 0x0005000A, 0x0 },/* 2: 400 600 3.5 */ |
| { 0x00FFFFFF, 0x0005000A, 0x0 },/* 3: 600 600 0 */ |
| { 0x00E79FFF, 0x001D0007, 0x0 },/* 4: 600 750 2 */ |
| { 0x00D75FFF, 0x000C0004, 0x0 },/* 5: 600 900 3.5 */ |
| { 0x00FFFFFF, 0x00040006, 0x0 },/* 6: 800 800 0 */ |
| { 0x80E79FFF, 0x00030002, 0x0 },/* 7: 800 1000 2 */ |
| { 0x00FFFFFF, 0x00140005, 0x0 },/* 8: 850 850 0 */ |
| { 0x00FFFFFF, 0x000C0004, 0x0 },/* 9: 900 900 0 */ |
| { 0x00FFFFFF, 0x001C0003, 0x0 },/* 10: 950 950 0 */ |
| { 0x80FFFFFF, 0x00030002, 0x0 },/* 11: 1000 1000 0 */ |
| }; |
| |
| static const struct ddi_buf_trans bdw_ddi_translations_edp[] = { |
| { 0x00FFFFFF, 0x00000012, 0x0 }, |
| { 0x00EBAFFF, 0x00020011, 0x0 }, |
| { 0x00C71FFF, 0x0006000F, 0x0 }, |
| { 0x00AAAFFF, 0x000E000A, 0x0 }, |
| { 0x00FFFFFF, 0x00020011, 0x0 }, |
| { 0x00DB6FFF, 0x0005000F, 0x0 }, |
| { 0x00BEEFFF, 0x000A000C, 0x0 }, |
| { 0x00FFFFFF, 0x0005000F, 0x0 }, |
| { 0x00DB6FFF, 0x000A000C, 0x0 }, |
| }; |
| |
| static const struct ddi_buf_trans bdw_ddi_translations_dp[] = { |
| { 0x00FFFFFF, 0x0007000E, 0x0 }, |
| { 0x00D75FFF, 0x000E000A, 0x0 }, |
| { 0x00BEFFFF, 0x00140006, 0x0 }, |
| { 0x80B2CFFF, 0x001B0002, 0x0 }, |
| { 0x00FFFFFF, 0x000E000A, 0x0 }, |
| { 0x00DB6FFF, 0x00160005, 0x0 }, |
| { 0x80C71FFF, 0x001A0002, 0x0 }, |
| { 0x00F7DFFF, 0x00180004, 0x0 }, |
| { 0x80D75FFF, 0x001B0002, 0x0 }, |
| }; |
| |
| static const struct ddi_buf_trans bdw_ddi_translations_fdi[] = { |
| { 0x00FFFFFF, 0x0001000E, 0x0 }, |
| { 0x00D75FFF, 0x0004000A, 0x0 }, |
| { 0x00C30FFF, 0x00070006, 0x0 }, |
| { 0x00AAAFFF, 0x000C0000, 0x0 }, |
| { 0x00FFFFFF, 0x0004000A, 0x0 }, |
| { 0x00D75FFF, 0x00090004, 0x0 }, |
| { 0x00C30FFF, 0x000C0000, 0x0 }, |
| { 0x00FFFFFF, 0x00070006, 0x0 }, |
| { 0x00D75FFF, 0x000C0000, 0x0 }, |
| }; |
| |
| static const struct ddi_buf_trans bdw_ddi_translations_hdmi[] = { |
| /* Idx NT mV d T mV df db */ |
| { 0x00FFFFFF, 0x0007000E, 0x0 },/* 0: 400 400 0 */ |
| { 0x00D75FFF, 0x000E000A, 0x0 },/* 1: 400 600 3.5 */ |
| { 0x00BEFFFF, 0x00140006, 0x0 },/* 2: 400 800 6 */ |
| { 0x00FFFFFF, 0x0009000D, 0x0 },/* 3: 450 450 0 */ |
| { 0x00FFFFFF, 0x000E000A, 0x0 },/* 4: 600 600 0 */ |
| { 0x00D7FFFF, 0x00140006, 0x0 },/* 5: 600 800 2.5 */ |
| { 0x80CB2FFF, 0x001B0002, 0x0 },/* 6: 600 1000 4.5 */ |
| { 0x00FFFFFF, 0x00140006, 0x0 },/* 7: 800 800 0 */ |
| { 0x80E79FFF, 0x001B0002, 0x0 },/* 8: 800 1000 2 */ |
| { 0x80FFFFFF, 0x001B0002, 0x0 },/* 9: 1000 1000 0 */ |
| }; |
| |
| /* Skylake H and S */ |
| static const struct ddi_buf_trans skl_ddi_translations_dp[] = { |
| { 0x00002016, 0x000000A0, 0x0 }, |
| { 0x00005012, 0x0000009B, 0x0 }, |
| { 0x00007011, 0x00000088, 0x0 }, |
| { 0x80009010, 0x000000C0, 0x1 }, |
| { 0x00002016, 0x0000009B, 0x0 }, |
| { 0x00005012, 0x00000088, 0x0 }, |
| { 0x80007011, 0x000000C0, 0x1 }, |
| { 0x00002016, 0x000000DF, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x1 }, |
| }; |
| |
| /* Skylake U */ |
| static const struct ddi_buf_trans skl_u_ddi_translations_dp[] = { |
| { 0x0000201B, 0x000000A2, 0x0 }, |
| { 0x00005012, 0x00000088, 0x0 }, |
| { 0x80007011, 0x000000CD, 0x1 }, |
| { 0x80009010, 0x000000C0, 0x1 }, |
| { 0x0000201B, 0x0000009D, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x1 }, |
| { 0x80007011, 0x000000C0, 0x1 }, |
| { 0x00002016, 0x00000088, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x1 }, |
| }; |
| |
| /* Skylake Y */ |
| static const struct ddi_buf_trans skl_y_ddi_translations_dp[] = { |
| { 0x00000018, 0x000000A2, 0x0 }, |
| { 0x00005012, 0x00000088, 0x0 }, |
| { 0x80007011, 0x000000CD, 0x3 }, |
| { 0x80009010, 0x000000C0, 0x3 }, |
| { 0x00000018, 0x0000009D, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x3 }, |
| { 0x80007011, 0x000000C0, 0x3 }, |
| { 0x00000018, 0x00000088, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x3 }, |
| }; |
| |
| /* Kabylake H and S */ |
| static const struct ddi_buf_trans kbl_ddi_translations_dp[] = { |
| { 0x00002016, 0x000000A0, 0x0 }, |
| { 0x00005012, 0x0000009B, 0x0 }, |
| { 0x00007011, 0x00000088, 0x0 }, |
| { 0x80009010, 0x000000C0, 0x1 }, |
| { 0x00002016, 0x0000009B, 0x0 }, |
| { 0x00005012, 0x00000088, 0x0 }, |
| { 0x80007011, 0x000000C0, 0x1 }, |
| { 0x00002016, 0x00000097, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x1 }, |
| }; |
| |
| /* Kabylake U */ |
| static const struct ddi_buf_trans kbl_u_ddi_translations_dp[] = { |
| { 0x0000201B, 0x000000A1, 0x0 }, |
| { 0x00005012, 0x00000088, 0x0 }, |
| { 0x80007011, 0x000000CD, 0x3 }, |
| { 0x80009010, 0x000000C0, 0x3 }, |
| { 0x0000201B, 0x0000009D, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x3 }, |
| { 0x80007011, 0x000000C0, 0x3 }, |
| { 0x00002016, 0x0000004F, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x3 }, |
| }; |
| |
| /* Kabylake Y */ |
| static const struct ddi_buf_trans kbl_y_ddi_translations_dp[] = { |
| { 0x00001017, 0x000000A1, 0x0 }, |
| { 0x00005012, 0x00000088, 0x0 }, |
| { 0x80007011, 0x000000CD, 0x3 }, |
| { 0x8000800F, 0x000000C0, 0x3 }, |
| { 0x00001017, 0x0000009D, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x3 }, |
| { 0x80007011, 0x000000C0, 0x3 }, |
| { 0x00001017, 0x0000004C, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x3 }, |
| }; |
| |
| /* |
| * Skylake/Kabylake H and S |
| * eDP 1.4 low vswing translation parameters |
| */ |
| static const struct ddi_buf_trans skl_ddi_translations_edp[] = { |
| { 0x00000018, 0x000000A8, 0x0 }, |
| { 0x00004013, 0x000000A9, 0x0 }, |
| { 0x00007011, 0x000000A2, 0x0 }, |
| { 0x00009010, 0x0000009C, 0x0 }, |
| { 0x00000018, 0x000000A9, 0x0 }, |
| { 0x00006013, 0x000000A2, 0x0 }, |
| { 0x00007011, 0x000000A6, 0x0 }, |
| { 0x00000018, 0x000000AB, 0x0 }, |
| { 0x00007013, 0x0000009F, 0x0 }, |
| { 0x00000018, 0x000000DF, 0x0 }, |
| }; |
| |
| /* |
| * Skylake/Kabylake U |
| * eDP 1.4 low vswing translation parameters |
| */ |
| static const struct ddi_buf_trans skl_u_ddi_translations_edp[] = { |
| { 0x00000018, 0x000000A8, 0x0 }, |
| { 0x00004013, 0x000000A9, 0x0 }, |
| { 0x00007011, 0x000000A2, 0x0 }, |
| { 0x00009010, 0x0000009C, 0x0 }, |
| { 0x00000018, 0x000000A9, 0x0 }, |
| { 0x00006013, 0x000000A2, 0x0 }, |
| { 0x00007011, 0x000000A6, 0x0 }, |
| { 0x00002016, 0x000000AB, 0x0 }, |
| { 0x00005013, 0x0000009F, 0x0 }, |
| { 0x00000018, 0x000000DF, 0x0 }, |
| }; |
| |
| /* |
| * Skylake/Kabylake Y |
| * eDP 1.4 low vswing translation parameters |
| */ |
| static const struct ddi_buf_trans skl_y_ddi_translations_edp[] = { |
| { 0x00000018, 0x000000A8, 0x0 }, |
| { 0x00004013, 0x000000AB, 0x0 }, |
| { 0x00007011, 0x000000A4, 0x0 }, |
| { 0x00009010, 0x000000DF, 0x0 }, |
| { 0x00000018, 0x000000AA, 0x0 }, |
| { 0x00006013, 0x000000A4, 0x0 }, |
| { 0x00007011, 0x0000009D, 0x0 }, |
| { 0x00000018, 0x000000A0, 0x0 }, |
| { 0x00006012, 0x000000DF, 0x0 }, |
| { 0x00000018, 0x0000008A, 0x0 }, |
| }; |
| |
| /* Skylake/Kabylake U, H and S */ |
| static const struct ddi_buf_trans skl_ddi_translations_hdmi[] = { |
| { 0x00000018, 0x000000AC, 0x0 }, |
| { 0x00005012, 0x0000009D, 0x0 }, |
| { 0x00007011, 0x00000088, 0x0 }, |
| { 0x00000018, 0x000000A1, 0x0 }, |
| { 0x00000018, 0x00000098, 0x0 }, |
| { 0x00004013, 0x00000088, 0x0 }, |
| { 0x80006012, 0x000000CD, 0x1 }, |
| { 0x00000018, 0x000000DF, 0x0 }, |
| { 0x80003015, 0x000000CD, 0x1 }, /* Default */ |
| { 0x80003015, 0x000000C0, 0x1 }, |
| { 0x80000018, 0x000000C0, 0x1 }, |
| }; |
| |
| /* Skylake/Kabylake Y */ |
| static const struct ddi_buf_trans skl_y_ddi_translations_hdmi[] = { |
| { 0x00000018, 0x000000A1, 0x0 }, |
| { 0x00005012, 0x000000DF, 0x0 }, |
| { 0x80007011, 0x000000CB, 0x3 }, |
| { 0x00000018, 0x000000A4, 0x0 }, |
| { 0x00000018, 0x0000009D, 0x0 }, |
| { 0x00004013, 0x00000080, 0x0 }, |
| { 0x80006013, 0x000000C0, 0x3 }, |
| { 0x00000018, 0x0000008A, 0x0 }, |
| { 0x80003015, 0x000000C0, 0x3 }, /* Default */ |
| { 0x80003015, 0x000000C0, 0x3 }, |
| { 0x80000018, 0x000000C0, 0x3 }, |
| }; |
| |
| struct bxt_ddi_buf_trans { |
| u32 margin; /* swing value */ |
| u32 scale; /* scale value */ |
| u32 enable; /* scale enable */ |
| u32 deemphasis; |
| bool default_index; /* true if the entry represents default value */ |
| }; |
| |
| static const struct bxt_ddi_buf_trans bxt_ddi_translations_dp[] = { |
| /* Idx NT mV diff db */ |
| { 52, 0x9A, 0, 128, true }, /* 0: 400 0 */ |
| { 78, 0x9A, 0, 85, false }, /* 1: 400 3.5 */ |
| { 104, 0x9A, 0, 64, false }, /* 2: 400 6 */ |
| { 154, 0x9A, 0, 43, false }, /* 3: 400 9.5 */ |
| { 77, 0x9A, 0, 128, false }, /* 4: 600 0 */ |
| { 116, 0x9A, 0, 85, false }, /* 5: 600 3.5 */ |
| { 154, 0x9A, 0, 64, false }, /* 6: 600 6 */ |
| { 102, 0x9A, 0, 128, false }, /* 7: 800 0 */ |
| { 154, 0x9A, 0, 85, false }, /* 8: 800 3.5 */ |
| { 154, 0x9A, 1, 128, false }, /* 9: 1200 0 */ |
| }; |
| |
| static const struct bxt_ddi_buf_trans bxt_ddi_translations_edp[] = { |
| /* Idx NT mV diff db */ |
| { 26, 0, 0, 128, false }, /* 0: 200 0 */ |
| { 38, 0, 0, 112, false }, /* 1: 200 1.5 */ |
| { 48, 0, 0, 96, false }, /* 2: 200 4 */ |
| { 54, 0, 0, 69, false }, /* 3: 200 6 */ |
| { 32, 0, 0, 128, false }, /* 4: 250 0 */ |
| { 48, 0, 0, 104, false }, /* 5: 250 1.5 */ |
| { 54, 0, 0, 85, false }, /* 6: 250 4 */ |
| { 43, 0, 0, 128, false }, /* 7: 300 0 */ |
| { 54, 0, 0, 101, false }, /* 8: 300 1.5 */ |
| { 48, 0, 0, 128, false }, /* 9: 300 0 */ |
| }; |
| |
| /* BSpec has 2 recommended values - entries 0 and 8. |
| * Using the entry with higher vswing. |
| */ |
| static const struct bxt_ddi_buf_trans bxt_ddi_translations_hdmi[] = { |
| /* Idx NT mV diff db */ |
| { 52, 0x9A, 0, 128, false }, /* 0: 400 0 */ |
| { 52, 0x9A, 0, 85, false }, /* 1: 400 3.5 */ |
| { 52, 0x9A, 0, 64, false }, /* 2: 400 6 */ |
| { 42, 0x9A, 0, 43, false }, /* 3: 400 9.5 */ |
| { 77, 0x9A, 0, 128, false }, /* 4: 600 0 */ |
| { 77, 0x9A, 0, 85, false }, /* 5: 600 3.5 */ |
| { 77, 0x9A, 0, 64, false }, /* 6: 600 6 */ |
| { 102, 0x9A, 0, 128, false }, /* 7: 800 0 */ |
| { 102, 0x9A, 0, 85, false }, /* 8: 800 3.5 */ |
| { 154, 0x9A, 1, 128, true }, /* 9: 1200 0 */ |
| }; |
| |
| struct cnl_ddi_buf_trans { |
| u32 dw2_swing_sel; |
| u32 dw7_n_scalar; |
| u32 dw4_cursor_coeff; |
| u32 dw4_post_cursor_2; |
| u32 dw4_post_cursor_1; |
| }; |
| |
| /* Voltage Swing Programming for VccIO 0.85V for DP */ |
| static const struct cnl_ddi_buf_trans cnl_ddi_translations_dp_0_85V[] = { |
| /* NT mV Trans mV db */ |
| { 0xA, 0x5D, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */ |
| { 0xA, 0x6A, 0x38, 0x00, 0x07 }, /* 350 500 3.1 */ |
| { 0xB, 0x7A, 0x32, 0x00, 0x0D }, /* 350 700 6.0 */ |
| { 0x6, 0x7C, 0x2D, 0x00, 0x12 }, /* 350 900 8.2 */ |
| { 0xA, 0x69, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */ |
| { 0xB, 0x7A, 0x36, 0x00, 0x09 }, /* 500 700 2.9 */ |
| { 0x6, 0x7C, 0x30, 0x00, 0x0F }, /* 500 900 5.1 */ |
| { 0xB, 0x7D, 0x3C, 0x00, 0x03 }, /* 650 725 0.9 */ |
| { 0x6, 0x7C, 0x34, 0x00, 0x0B }, /* 600 900 3.5 */ |
| { 0x6, 0x7B, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */ |
| }; |
| |
| /* Voltage Swing Programming for VccIO 0.85V for HDMI */ |
| static const struct cnl_ddi_buf_trans cnl_ddi_translations_hdmi_0_85V[] = { |
| /* NT mV Trans mV db */ |
| { 0xA, 0x60, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */ |
| { 0xB, 0x73, 0x36, 0x00, 0x09 }, /* 450 650 3.2 */ |
| { 0x6, 0x7F, 0x31, 0x00, 0x0E }, /* 450 850 5.5 */ |
| { 0xB, 0x73, 0x3F, 0x00, 0x00 }, /* 650 650 0.0 */ |
| { 0x6, 0x7F, 0x37, 0x00, 0x08 }, /* 650 850 2.3 */ |
| { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 850 850 0.0 */ |
| { 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */ |
| }; |
| |
| /* Voltage Swing Programming for VccIO 0.85V for eDP */ |
| static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_0_85V[] = { |
| /* NT mV Trans mV db */ |
| { 0xA, 0x66, 0x3A, 0x00, 0x05 }, /* 384 500 2.3 */ |
| { 0x0, 0x7F, 0x38, 0x00, 0x07 }, /* 153 200 2.3 */ |
| { 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 192 250 2.3 */ |
| { 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 230 300 2.3 */ |
| { 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 269 350 2.3 */ |
| { 0xA, 0x66, 0x3C, 0x00, 0x03 }, /* 446 500 1.0 */ |
| { 0xB, 0x70, 0x3C, 0x00, 0x03 }, /* 460 600 2.3 */ |
| { 0xC, 0x75, 0x3C, 0x00, 0x03 }, /* 537 700 2.3 */ |
| { 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */ |
| }; |
| |
| /* Voltage Swing Programming for VccIO 0.95V for DP */ |
| static const struct cnl_ddi_buf_trans cnl_ddi_translations_dp_0_95V[] = { |
| /* NT mV Trans mV db */ |
| { 0xA, 0x5D, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */ |
| { 0xA, 0x6A, 0x38, 0x00, 0x07 }, /* 350 500 3.1 */ |
| { 0xB, 0x7A, 0x32, 0x00, 0x0D }, /* 350 700 6.0 */ |
| { 0x6, 0x7C, 0x2D, 0x00, 0x12 }, /* 350 900 8.2 */ |
| { 0xA, 0x69, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */ |
| { 0xB, 0x7A, 0x36, 0x00, 0x09 }, /* 500 700 2.9 */ |
| { 0x6, 0x7C, 0x30, 0x00, 0x0F }, /* 500 900 5.1 */ |
| { 0xB, 0x7D, 0x3C, 0x00, 0x03 }, /* 650 725 0.9 */ |
| { 0x6, 0x7C, 0x34, 0x00, 0x0B }, /* 600 900 3.5 */ |
| { 0x6, 0x7B, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */ |
| }; |
| |
| /* Voltage Swing Programming for VccIO 0.95V for HDMI */ |
| static const struct cnl_ddi_buf_trans cnl_ddi_translations_hdmi_0_95V[] = { |
| /* NT mV Trans mV db */ |
| { 0xA, 0x5C, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */ |
| { 0xB, 0x69, 0x37, 0x00, 0x08 }, /* 400 600 3.5 */ |
| { 0x5, 0x76, 0x31, 0x00, 0x0E }, /* 400 800 6.0 */ |
| { 0xA, 0x5E, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */ |
| { 0xB, 0x69, 0x3F, 0x00, 0x00 }, /* 600 600 0.0 */ |
| { 0xB, 0x79, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */ |
| { 0x6, 0x7D, 0x32, 0x00, 0x0D }, /* 600 1000 4.4 */ |
| { 0x5, 0x76, 0x3F, 0x00, 0x00 }, /* 800 800 0.0 */ |
| { 0x6, 0x7D, 0x39, 0x00, 0x06 }, /* 800 1000 1.9 */ |
| { 0x6, 0x7F, 0x39, 0x00, 0x06 }, /* 850 1050 1.8 */ |
| { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 1050 1050 0.0 */ |
| }; |
| |
| /* Voltage Swing Programming for VccIO 0.95V for eDP */ |
| static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_0_95V[] = { |
| /* NT mV Trans mV db */ |
| { 0xA, 0x61, 0x3A, 0x00, 0x05 }, /* 384 500 2.3 */ |
| { 0x0, 0x7F, 0x38, 0x00, 0x07 }, /* 153 200 2.3 */ |
| { 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 192 250 2.3 */ |
| { 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 230 300 2.3 */ |
| { 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 269 350 2.3 */ |
| { 0xA, 0x61, 0x3C, 0x00, 0x03 }, /* 446 500 1.0 */ |
| { 0xB, 0x68, 0x39, 0x00, 0x06 }, /* 460 600 2.3 */ |
| { 0xC, 0x6E, 0x39, 0x00, 0x06 }, /* 537 700 2.3 */ |
| { 0x4, 0x7F, 0x3A, 0x00, 0x05 }, /* 460 600 2.3 */ |
| { 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */ |
| }; |
| |
| /* Voltage Swing Programming for VccIO 1.05V for DP */ |
| static const struct cnl_ddi_buf_trans cnl_ddi_translations_dp_1_05V[] = { |
| /* NT mV Trans mV db */ |
| { 0xA, 0x58, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */ |
| { 0xB, 0x64, 0x37, 0x00, 0x08 }, /* 400 600 3.5 */ |
| { 0x5, 0x70, 0x31, 0x00, 0x0E }, /* 400 800 6.0 */ |
| { 0x6, 0x7F, 0x2C, 0x00, 0x13 }, /* 400 1050 8.4 */ |
| { 0xB, 0x64, 0x3F, 0x00, 0x00 }, /* 600 600 0.0 */ |
| { 0x5, 0x73, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */ |
| { 0x6, 0x7F, 0x30, 0x00, 0x0F }, /* 550 1050 5.6 */ |
| { 0x5, 0x76, 0x3E, 0x00, 0x01 }, /* 850 900 0.5 */ |
| { 0x6, 0x7F, 0x36, 0x00, 0x09 }, /* 750 1050 2.9 */ |
| { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 1050 1050 0.0 */ |
| }; |
| |
| /* Voltage Swing Programming for VccIO 1.05V for HDMI */ |
| static const struct cnl_ddi_buf_trans cnl_ddi_translations_hdmi_1_05V[] = { |
| /* NT mV Trans mV db */ |
| { 0xA, 0x58, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */ |
| { 0xB, 0x64, 0x37, 0x00, 0x08 }, /* 400 600 3.5 */ |
| { 0x5, 0x70, 0x31, 0x00, 0x0E }, /* 400 800 6.0 */ |
| { 0xA, 0x5B, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */ |
| { 0xB, 0x64, 0x3F, 0x00, 0x00 }, /* 600 600 0.0 */ |
| { 0x5, 0x73, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */ |
| { 0x6, 0x7C, 0x32, 0x00, 0x0D }, /* 600 1000 4.4 */ |
| { 0x5, 0x70, 0x3F, 0x00, 0x00 }, /* 800 800 0.0 */ |
| { 0x6, 0x7C, 0x39, 0x00, 0x06 }, /* 800 1000 1.9 */ |
| { 0x6, 0x7F, 0x39, 0x00, 0x06 }, /* 850 1050 1.8 */ |
| { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 1050 1050 0.0 */ |
| }; |
| |
| /* Voltage Swing Programming for VccIO 1.05V for eDP */ |
| static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_1_05V[] = { |
| /* NT mV Trans mV db */ |
| { 0xA, 0x5E, 0x3A, 0x00, 0x05 }, /* 384 500 2.3 */ |
| { 0x0, 0x7F, 0x38, 0x00, 0x07 }, /* 153 200 2.3 */ |
| { 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 192 250 2.3 */ |
| { 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 230 300 2.3 */ |
| { 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 269 350 2.3 */ |
| { 0xA, 0x5E, 0x3C, 0x00, 0x03 }, /* 446 500 1.0 */ |
| { 0xB, 0x64, 0x39, 0x00, 0x06 }, /* 460 600 2.3 */ |
| { 0xE, 0x6A, 0x39, 0x00, 0x06 }, /* 537 700 2.3 */ |
| { 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */ |
| }; |
| |
| enum port intel_ddi_get_encoder_port(struct intel_encoder *encoder) |
| { |
| switch (encoder->type) { |
| case INTEL_OUTPUT_DP_MST: |
| return enc_to_mst(&encoder->base)->primary->port; |
| case INTEL_OUTPUT_DP: |
| case INTEL_OUTPUT_EDP: |
| case INTEL_OUTPUT_HDMI: |
| case INTEL_OUTPUT_UNKNOWN: |
| return enc_to_dig_port(&encoder->base)->port; |
| case INTEL_OUTPUT_ANALOG: |
| return PORT_E; |
| default: |
| MISSING_CASE(encoder->type); |
| return PORT_A; |
| } |
| } |
| |
| static const struct ddi_buf_trans * |
| bdw_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries) |
| { |
| if (dev_priv->vbt.edp.low_vswing) { |
| *n_entries = ARRAY_SIZE(bdw_ddi_translations_edp); |
| return bdw_ddi_translations_edp; |
| } else { |
| *n_entries = ARRAY_SIZE(bdw_ddi_translations_dp); |
| return bdw_ddi_translations_dp; |
| } |
| } |
| |
| static const struct ddi_buf_trans * |
| skl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries) |
| { |
| if (IS_SKL_ULX(dev_priv)) { |
| *n_entries = ARRAY_SIZE(skl_y_ddi_translations_dp); |
| return skl_y_ddi_translations_dp; |
| } else if (IS_SKL_ULT(dev_priv)) { |
| *n_entries = ARRAY_SIZE(skl_u_ddi_translations_dp); |
| return skl_u_ddi_translations_dp; |
| } else { |
| *n_entries = ARRAY_SIZE(skl_ddi_translations_dp); |
| return skl_ddi_translations_dp; |
| } |
| } |
| |
| static const struct ddi_buf_trans * |
| kbl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries) |
| { |
| if (IS_KBL_ULX(dev_priv)) { |
| *n_entries = ARRAY_SIZE(kbl_y_ddi_translations_dp); |
| return kbl_y_ddi_translations_dp; |
| } else if (IS_KBL_ULT(dev_priv) || IS_CFL_ULT(dev_priv)) { |
| *n_entries = ARRAY_SIZE(kbl_u_ddi_translations_dp); |
| return kbl_u_ddi_translations_dp; |
| } else { |
| *n_entries = ARRAY_SIZE(kbl_ddi_translations_dp); |
| return kbl_ddi_translations_dp; |
| } |
| } |
| |
| static const struct ddi_buf_trans * |
| skl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries) |
| { |
| if (dev_priv->vbt.edp.low_vswing) { |
| if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { |
| *n_entries = ARRAY_SIZE(skl_y_ddi_translations_edp); |
| return skl_y_ddi_translations_edp; |
| } else if (IS_SKL_ULT(dev_priv) || IS_KBL_ULT(dev_priv) || |
| IS_CFL_ULT(dev_priv)) { |
| *n_entries = ARRAY_SIZE(skl_u_ddi_translations_edp); |
| return skl_u_ddi_translations_edp; |
| } else { |
| *n_entries = ARRAY_SIZE(skl_ddi_translations_edp); |
| return skl_ddi_translations_edp; |
| } |
| } |
| |
| if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) |
| return kbl_get_buf_trans_dp(dev_priv, n_entries); |
| else |
| return skl_get_buf_trans_dp(dev_priv, n_entries); |
| } |
| |
| static const struct ddi_buf_trans * |
| skl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries) |
| { |
| if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { |
| *n_entries = ARRAY_SIZE(skl_y_ddi_translations_hdmi); |
| return skl_y_ddi_translations_hdmi; |
| } else { |
| *n_entries = ARRAY_SIZE(skl_ddi_translations_hdmi); |
| return skl_ddi_translations_hdmi; |
| } |
| } |
| |
| static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port port) |
| { |
| int n_hdmi_entries; |
| int hdmi_level; |
| int hdmi_default_entry; |
| |
| hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift; |
| |
| if (IS_GEN9_LP(dev_priv)) |
| return hdmi_level; |
| |
| if (IS_GEN9_BC(dev_priv)) { |
| skl_get_buf_trans_hdmi(dev_priv, &n_hdmi_entries); |
| hdmi_default_entry = 8; |
| } else if (IS_BROADWELL(dev_priv)) { |
| n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); |
| hdmi_default_entry = 7; |
| } else if (IS_HASWELL(dev_priv)) { |
| n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi); |
| hdmi_default_entry = 6; |
| } else { |
| WARN(1, "ddi translation table missing\n"); |
| n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); |
| hdmi_default_entry = 7; |
| } |
| |
| /* Choose a good default if VBT is badly populated */ |
| if (hdmi_level == HDMI_LEVEL_SHIFT_UNKNOWN || |
| hdmi_level >= n_hdmi_entries) |
| hdmi_level = hdmi_default_entry; |
| |
| return hdmi_level; |
| } |
| |
| static const struct ddi_buf_trans * |
| intel_ddi_get_buf_trans_dp(struct drm_i915_private *dev_priv, |
| int *n_entries) |
| { |
| if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) { |
| return kbl_get_buf_trans_dp(dev_priv, n_entries); |
| } else if (IS_SKYLAKE(dev_priv)) { |
| return skl_get_buf_trans_dp(dev_priv, n_entries); |
| } else if (IS_BROADWELL(dev_priv)) { |
| *n_entries = ARRAY_SIZE(bdw_ddi_translations_dp); |
| return bdw_ddi_translations_dp; |
| } else if (IS_HASWELL(dev_priv)) { |
| *n_entries = ARRAY_SIZE(hsw_ddi_translations_dp); |
| return hsw_ddi_translations_dp; |
| } |
| |
| *n_entries = 0; |
| return NULL; |
| } |
| |
| static const struct ddi_buf_trans * |
| intel_ddi_get_buf_trans_edp(struct drm_i915_private *dev_priv, |
| int *n_entries) |
| { |
| if (IS_GEN9_BC(dev_priv)) { |
| return skl_get_buf_trans_edp(dev_priv, n_entries); |
| } else if (IS_BROADWELL(dev_priv)) { |
| return bdw_get_buf_trans_edp(dev_priv, n_entries); |
| } else if (IS_HASWELL(dev_priv)) { |
| *n_entries = ARRAY_SIZE(hsw_ddi_translations_dp); |
| return hsw_ddi_translations_dp; |
| } |
| |
| *n_entries = 0; |
| return NULL; |
| } |
| |
| static const struct ddi_buf_trans * |
| intel_ddi_get_buf_trans_fdi(struct drm_i915_private *dev_priv, |
| int *n_entries) |
| { |
| if (IS_BROADWELL(dev_priv)) { |
| *n_entries = ARRAY_SIZE(hsw_ddi_translations_fdi); |
| return hsw_ddi_translations_fdi; |
| } else if (IS_HASWELL(dev_priv)) { |
| *n_entries = ARRAY_SIZE(hsw_ddi_translations_fdi); |
| return hsw_ddi_translations_fdi; |
| } |
| |
| *n_entries = 0; |
| return NULL; |
| } |
| |
| /* |
| * Starting with Haswell, DDI port buffers must be programmed with correct |
| * values in advance. This function programs the correct values for |
| * DP/eDP/FDI use cases. |
| */ |
| static void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| u32 iboost_bit = 0; |
| int i, n_entries; |
| enum port port = intel_ddi_get_encoder_port(encoder); |
| const struct ddi_buf_trans *ddi_translations; |
| |
| if (IS_GEN9_LP(dev_priv)) |
| return; |
| |
| switch (encoder->type) { |
| case INTEL_OUTPUT_EDP: |
| ddi_translations = intel_ddi_get_buf_trans_edp(dev_priv, |
| &n_entries); |
| break; |
| case INTEL_OUTPUT_DP: |
| ddi_translations = intel_ddi_get_buf_trans_dp(dev_priv, |
| &n_entries); |
| break; |
| case INTEL_OUTPUT_ANALOG: |
| ddi_translations = intel_ddi_get_buf_trans_fdi(dev_priv, |
| &n_entries); |
| break; |
| default: |
| MISSING_CASE(encoder->type); |
| return; |
| } |
| |
| if (IS_GEN9_BC(dev_priv)) { |
| /* If we're boosting the current, set bit 31 of trans1 */ |
| if (dev_priv->vbt.ddi_port_info[port].dp_boost_level) |
| iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE; |
| |
| if (WARN_ON(encoder->type == INTEL_OUTPUT_EDP && |
| port != PORT_A && port != PORT_E && |
| n_entries > 9)) |
| n_entries = 9; |
| } |
| |
| for (i = 0; i < n_entries; i++) { |
| I915_WRITE(DDI_BUF_TRANS_LO(port, i), |
| ddi_translations[i].trans1 | iboost_bit); |
| I915_WRITE(DDI_BUF_TRANS_HI(port, i), |
| ddi_translations[i].trans2); |
| } |
| } |
| |
| /* |
| * Starting with Haswell, DDI port buffers must be programmed with correct |
| * values in advance. This function programs the correct values for |
| * HDMI/DVI use cases. |
| */ |
| static void intel_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| u32 iboost_bit = 0; |
| int n_hdmi_entries, hdmi_level; |
| enum port port = intel_ddi_get_encoder_port(encoder); |
| const struct ddi_buf_trans *ddi_translations_hdmi; |
| |
| if (IS_GEN9_LP(dev_priv)) |
| return; |
| |
| hdmi_level = intel_ddi_hdmi_level(dev_priv, port); |
| |
| if (IS_GEN9_BC(dev_priv)) { |
| ddi_translations_hdmi = skl_get_buf_trans_hdmi(dev_priv, &n_hdmi_entries); |
| |
| /* If we're boosting the current, set bit 31 of trans1 */ |
| if (dev_priv->vbt.ddi_port_info[port].hdmi_boost_level) |
| iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE; |
| } else if (IS_BROADWELL(dev_priv)) { |
| ddi_translations_hdmi = bdw_ddi_translations_hdmi; |
| n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); |
| } else if (IS_HASWELL(dev_priv)) { |
| ddi_translations_hdmi = hsw_ddi_translations_hdmi; |
| n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi); |
| } else { |
| WARN(1, "ddi translation table missing\n"); |
| ddi_translations_hdmi = bdw_ddi_translations_hdmi; |
| n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); |
| } |
| |
| /* Entry 9 is for HDMI: */ |
| I915_WRITE(DDI_BUF_TRANS_LO(port, 9), |
| ddi_translations_hdmi[hdmi_level].trans1 | iboost_bit); |
| I915_WRITE(DDI_BUF_TRANS_HI(port, 9), |
| ddi_translations_hdmi[hdmi_level].trans2); |
| } |
| |
| static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv, |
| enum port port) |
| { |
| i915_reg_t reg = DDI_BUF_CTL(port); |
| int i; |
| |
| for (i = 0; i < 16; i++) { |
| udelay(1); |
| if (I915_READ(reg) & DDI_BUF_IS_IDLE) |
| return; |
| } |
| DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port)); |
| } |
| |
| static uint32_t hsw_pll_to_ddi_pll_sel(struct intel_shared_dpll *pll) |
| { |
| switch (pll->id) { |
| case DPLL_ID_WRPLL1: |
| return PORT_CLK_SEL_WRPLL1; |
| case DPLL_ID_WRPLL2: |
| return PORT_CLK_SEL_WRPLL2; |
| case DPLL_ID_SPLL: |
| return PORT_CLK_SEL_SPLL; |
| case DPLL_ID_LCPLL_810: |
| return PORT_CLK_SEL_LCPLL_810; |
| case DPLL_ID_LCPLL_1350: |
| return PORT_CLK_SEL_LCPLL_1350; |
| case DPLL_ID_LCPLL_2700: |
| return PORT_CLK_SEL_LCPLL_2700; |
| default: |
| MISSING_CASE(pll->id); |
| return PORT_CLK_SEL_NONE; |
| } |
| } |
| |
| /* Starting with Haswell, different DDI ports can work in FDI mode for |
| * connection to the PCH-located connectors. For this, it is necessary to train |
| * both the DDI port and PCH receiver for the desired DDI buffer settings. |
| * |
| * The recommended port to work in FDI mode is DDI E, which we use here. Also, |
| * please note that when FDI mode is active on DDI E, it shares 2 lines with |
| * DDI A (which is used for eDP) |
| */ |
| |
| void hsw_fdi_link_train(struct intel_crtc *crtc, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_encoder *encoder; |
| u32 temp, i, rx_ctl_val, ddi_pll_sel; |
| |
| for_each_encoder_on_crtc(dev, &crtc->base, encoder) { |
| WARN_ON(encoder->type != INTEL_OUTPUT_ANALOG); |
| intel_prepare_dp_ddi_buffers(encoder); |
| } |
| |
| /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the |
| * mode set "sequence for CRT port" document: |
| * - TP1 to TP2 time with the default value |
| * - FDI delay to 90h |
| * |
| * WaFDIAutoLinkSetTimingOverrride:hsw |
| */ |
| I915_WRITE(FDI_RX_MISC(PIPE_A), FDI_RX_PWRDN_LANE1_VAL(2) | |
| FDI_RX_PWRDN_LANE0_VAL(2) | |
| FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90); |
| |
| /* Enable the PCH Receiver FDI PLL */ |
| rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE | |
| FDI_RX_PLL_ENABLE | |
| FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes); |
| I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); |
| POSTING_READ(FDI_RX_CTL(PIPE_A)); |
| udelay(220); |
| |
| /* Switch from Rawclk to PCDclk */ |
| rx_ctl_val |= FDI_PCDCLK; |
| I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); |
| |
| /* Configure Port Clock Select */ |
| ddi_pll_sel = hsw_pll_to_ddi_pll_sel(crtc_state->shared_dpll); |
| I915_WRITE(PORT_CLK_SEL(PORT_E), ddi_pll_sel); |
| WARN_ON(ddi_pll_sel != PORT_CLK_SEL_SPLL); |
| |
| /* Start the training iterating through available voltages and emphasis, |
| * testing each value twice. */ |
| for (i = 0; i < ARRAY_SIZE(hsw_ddi_translations_fdi) * 2; i++) { |
| /* Configure DP_TP_CTL with auto-training */ |
| I915_WRITE(DP_TP_CTL(PORT_E), |
| DP_TP_CTL_FDI_AUTOTRAIN | |
| DP_TP_CTL_ENHANCED_FRAME_ENABLE | |
| DP_TP_CTL_LINK_TRAIN_PAT1 | |
| DP_TP_CTL_ENABLE); |
| |
| /* Configure and enable DDI_BUF_CTL for DDI E with next voltage. |
| * DDI E does not support port reversal, the functionality is |
| * achieved on the PCH side in FDI_RX_CTL, so no need to set the |
| * port reversal bit */ |
| I915_WRITE(DDI_BUF_CTL(PORT_E), |
| DDI_BUF_CTL_ENABLE | |
| ((crtc_state->fdi_lanes - 1) << 1) | |
| DDI_BUF_TRANS_SELECT(i / 2)); |
| POSTING_READ(DDI_BUF_CTL(PORT_E)); |
| |
| udelay(600); |
| |
| /* Program PCH FDI Receiver TU */ |
| I915_WRITE(FDI_RX_TUSIZE1(PIPE_A), TU_SIZE(64)); |
| |
| /* Enable PCH FDI Receiver with auto-training */ |
| rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO; |
| I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); |
| POSTING_READ(FDI_RX_CTL(PIPE_A)); |
| |
| /* Wait for FDI receiver lane calibration */ |
| udelay(30); |
| |
| /* Unset FDI_RX_MISC pwrdn lanes */ |
| temp = I915_READ(FDI_RX_MISC(PIPE_A)); |
| temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); |
| I915_WRITE(FDI_RX_MISC(PIPE_A), temp); |
| POSTING_READ(FDI_RX_MISC(PIPE_A)); |
| |
| /* Wait for FDI auto training time */ |
| udelay(5); |
| |
| temp = I915_READ(DP_TP_STATUS(PORT_E)); |
| if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) { |
| DRM_DEBUG_KMS("FDI link training done on step %d\n", i); |
| break; |
| } |
| |
| /* |
| * Leave things enabled even if we failed to train FDI. |
| * Results in less fireworks from the state checker. |
| */ |
| if (i == ARRAY_SIZE(hsw_ddi_translations_fdi) * 2 - 1) { |
| DRM_ERROR("FDI link training failed!\n"); |
| break; |
| } |
| |
| rx_ctl_val &= ~FDI_RX_ENABLE; |
| I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); |
| POSTING_READ(FDI_RX_CTL(PIPE_A)); |
| |
| temp = I915_READ(DDI_BUF_CTL(PORT_E)); |
| temp &= ~DDI_BUF_CTL_ENABLE; |
| I915_WRITE(DDI_BUF_CTL(PORT_E), temp); |
| POSTING_READ(DDI_BUF_CTL(PORT_E)); |
| |
| /* Disable DP_TP_CTL and FDI_RX_CTL and retry */ |
| temp = I915_READ(DP_TP_CTL(PORT_E)); |
| temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); |
| temp |= DP_TP_CTL_LINK_TRAIN_PAT1; |
| I915_WRITE(DP_TP_CTL(PORT_E), temp); |
| POSTING_READ(DP_TP_CTL(PORT_E)); |
| |
| intel_wait_ddi_buf_idle(dev_priv, PORT_E); |
| |
| /* Reset FDI_RX_MISC pwrdn lanes */ |
| temp = I915_READ(FDI_RX_MISC(PIPE_A)); |
| temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); |
| temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2); |
| I915_WRITE(FDI_RX_MISC(PIPE_A), temp); |
| POSTING_READ(FDI_RX_MISC(PIPE_A)); |
| } |
| |
| /* Enable normal pixel sending for FDI */ |
| I915_WRITE(DP_TP_CTL(PORT_E), |
| DP_TP_CTL_FDI_AUTOTRAIN | |
| DP_TP_CTL_LINK_TRAIN_NORMAL | |
| DP_TP_CTL_ENHANCED_FRAME_ENABLE | |
| DP_TP_CTL_ENABLE); |
| } |
| |
| static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| struct intel_digital_port *intel_dig_port = |
| enc_to_dig_port(&encoder->base); |
| |
| intel_dp->DP = intel_dig_port->saved_port_bits | |
| DDI_BUF_CTL_ENABLE | DDI_BUF_TRANS_SELECT(0); |
| intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count); |
| } |
| |
| static struct intel_encoder * |
| intel_ddi_get_crtc_encoder(struct intel_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct intel_encoder *encoder, *ret = NULL; |
| int num_encoders = 0; |
| |
| for_each_encoder_on_crtc(dev, &crtc->base, encoder) { |
| ret = encoder; |
| num_encoders++; |
| } |
| |
| if (num_encoders != 1) |
| WARN(1, "%d encoders on crtc for pipe %c\n", num_encoders, |
| pipe_name(crtc->pipe)); |
| |
| BUG_ON(ret == NULL); |
| return ret; |
| } |
| |
| /* Finds the only possible encoder associated with the given CRTC. */ |
| struct intel_encoder * |
| intel_ddi_get_crtc_new_encoder(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); |
| struct intel_encoder *ret = NULL; |
| struct drm_atomic_state *state; |
| struct drm_connector *connector; |
| struct drm_connector_state *connector_state; |
| int num_encoders = 0; |
| int i; |
| |
| state = crtc_state->base.state; |
| |
| for_each_new_connector_in_state(state, connector, connector_state, i) { |
| if (connector_state->crtc != crtc_state->base.crtc) |
| continue; |
| |
| ret = to_intel_encoder(connector_state->best_encoder); |
| num_encoders++; |
| } |
| |
| WARN(num_encoders != 1, "%d encoders on crtc for pipe %c\n", num_encoders, |
| pipe_name(crtc->pipe)); |
| |
| BUG_ON(ret == NULL); |
| return ret; |
| } |
| |
| #define LC_FREQ 2700 |
| |
| static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv, |
| i915_reg_t reg) |
| { |
| int refclk = LC_FREQ; |
| int n, p, r; |
| u32 wrpll; |
| |
| wrpll = I915_READ(reg); |
| switch (wrpll & WRPLL_PLL_REF_MASK) { |
| case WRPLL_PLL_SSC: |
| case WRPLL_PLL_NON_SSC: |
| /* |
| * We could calculate spread here, but our checking |
| * code only cares about 5% accuracy, and spread is a max of |
| * 0.5% downspread. |
| */ |
| refclk = 135; |
| break; |
| case WRPLL_PLL_LCPLL: |
| refclk = LC_FREQ; |
| break; |
| default: |
| WARN(1, "bad wrpll refclk\n"); |
| return 0; |
| } |
| |
| r = wrpll & WRPLL_DIVIDER_REF_MASK; |
| p = (wrpll & WRPLL_DIVIDER_POST_MASK) >> WRPLL_DIVIDER_POST_SHIFT; |
| n = (wrpll & WRPLL_DIVIDER_FB_MASK) >> WRPLL_DIVIDER_FB_SHIFT; |
| |
| /* Convert to KHz, p & r have a fixed point portion */ |
| return (refclk * n * 100) / (p * r); |
| } |
| |
| static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv, |
| uint32_t dpll) |
| { |
| i915_reg_t cfgcr1_reg, cfgcr2_reg; |
| uint32_t cfgcr1_val, cfgcr2_val; |
| uint32_t p0, p1, p2, dco_freq; |
| |
| cfgcr1_reg = DPLL_CFGCR1(dpll); |
| cfgcr2_reg = DPLL_CFGCR2(dpll); |
| |
| cfgcr1_val = I915_READ(cfgcr1_reg); |
| cfgcr2_val = I915_READ(cfgcr2_reg); |
| |
| p0 = cfgcr2_val & DPLL_CFGCR2_PDIV_MASK; |
| p2 = cfgcr2_val & DPLL_CFGCR2_KDIV_MASK; |
| |
| if (cfgcr2_val & DPLL_CFGCR2_QDIV_MODE(1)) |
| p1 = (cfgcr2_val & DPLL_CFGCR2_QDIV_RATIO_MASK) >> 8; |
| else |
| p1 = 1; |
| |
| |
| switch (p0) { |
| case DPLL_CFGCR2_PDIV_1: |
| p0 = 1; |
| break; |
| case DPLL_CFGCR2_PDIV_2: |
| p0 = 2; |
| break; |
| case DPLL_CFGCR2_PDIV_3: |
| p0 = 3; |
| break; |
| case DPLL_CFGCR2_PDIV_7: |
| p0 = 7; |
| break; |
| } |
| |
| switch (p2) { |
| case DPLL_CFGCR2_KDIV_5: |
| p2 = 5; |
| break; |
| case DPLL_CFGCR2_KDIV_2: |
| p2 = 2; |
| break; |
| case DPLL_CFGCR2_KDIV_3: |
| p2 = 3; |
| break; |
| case DPLL_CFGCR2_KDIV_1: |
| p2 = 1; |
| break; |
| } |
| |
| dco_freq = (cfgcr1_val & DPLL_CFGCR1_DCO_INTEGER_MASK) * 24 * 1000; |
| |
| dco_freq += (((cfgcr1_val & DPLL_CFGCR1_DCO_FRACTION_MASK) >> 9) * 24 * |
| 1000) / 0x8000; |
| |
| return dco_freq / (p0 * p1 * p2 * 5); |
| } |
| |
| static void ddi_dotclock_get(struct intel_crtc_state *pipe_config) |
| { |
| int dotclock; |
| |
| if (pipe_config->has_pch_encoder) |
| dotclock = intel_dotclock_calculate(pipe_config->port_clock, |
| &pipe_config->fdi_m_n); |
| else if (intel_crtc_has_dp_encoder(pipe_config)) |
| dotclock = intel_dotclock_calculate(pipe_config->port_clock, |
| &pipe_config->dp_m_n); |
| else if (pipe_config->has_hdmi_sink && pipe_config->pipe_bpp == 36) |
| dotclock = pipe_config->port_clock * 2 / 3; |
| else |
| dotclock = pipe_config->port_clock; |
| |
| if (pipe_config->pixel_multiplier) |
| dotclock /= pipe_config->pixel_multiplier; |
| |
| pipe_config->base.adjusted_mode.crtc_clock = dotclock; |
| } |
| |
| static void skl_ddi_clock_get(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| int link_clock = 0; |
| uint32_t dpll_ctl1, dpll; |
| |
| dpll = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll); |
| |
| dpll_ctl1 = I915_READ(DPLL_CTRL1); |
| |
| if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(dpll)) { |
| link_clock = skl_calc_wrpll_link(dev_priv, dpll); |
| } else { |
| link_clock = dpll_ctl1 & DPLL_CTRL1_LINK_RATE_MASK(dpll); |
| link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(dpll); |
| |
| switch (link_clock) { |
| case DPLL_CTRL1_LINK_RATE_810: |
| link_clock = 81000; |
| break; |
| case DPLL_CTRL1_LINK_RATE_1080: |
| link_clock = 108000; |
| break; |
| case DPLL_CTRL1_LINK_RATE_1350: |
| link_clock = 135000; |
| break; |
| case DPLL_CTRL1_LINK_RATE_1620: |
| link_clock = 162000; |
| break; |
| case DPLL_CTRL1_LINK_RATE_2160: |
| link_clock = 216000; |
| break; |
| case DPLL_CTRL1_LINK_RATE_2700: |
| link_clock = 270000; |
| break; |
| default: |
| WARN(1, "Unsupported link rate\n"); |
| break; |
| } |
| link_clock *= 2; |
| } |
| |
| pipe_config->port_clock = link_clock; |
| |
| ddi_dotclock_get(pipe_config); |
| } |
| |
| static void hsw_ddi_clock_get(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| int link_clock = 0; |
| u32 val, pll; |
| |
| val = hsw_pll_to_ddi_pll_sel(pipe_config->shared_dpll); |
| switch (val & PORT_CLK_SEL_MASK) { |
| case PORT_CLK_SEL_LCPLL_810: |
| link_clock = 81000; |
| break; |
| case PORT_CLK_SEL_LCPLL_1350: |
| link_clock = 135000; |
| break; |
| case PORT_CLK_SEL_LCPLL_2700: |
| link_clock = 270000; |
| break; |
| case PORT_CLK_SEL_WRPLL1: |
| link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(0)); |
| break; |
| case PORT_CLK_SEL_WRPLL2: |
| link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(1)); |
| break; |
| case PORT_CLK_SEL_SPLL: |
| pll = I915_READ(SPLL_CTL) & SPLL_PLL_FREQ_MASK; |
| if (pll == SPLL_PLL_FREQ_810MHz) |
| link_clock = 81000; |
| else if (pll == SPLL_PLL_FREQ_1350MHz) |
| link_clock = 135000; |
| else if (pll == SPLL_PLL_FREQ_2700MHz) |
| link_clock = 270000; |
| else { |
| WARN(1, "bad spll freq\n"); |
| return; |
| } |
| break; |
| default: |
| WARN(1, "bad port clock sel\n"); |
| return; |
| } |
| |
| pipe_config->port_clock = link_clock * 2; |
| |
| ddi_dotclock_get(pipe_config); |
| } |
| |
| static int bxt_calc_pll_link(struct drm_i915_private *dev_priv, |
| enum intel_dpll_id dpll) |
| { |
| struct intel_shared_dpll *pll; |
| struct intel_dpll_hw_state *state; |
| struct dpll clock; |
| |
| /* For DDI ports we always use a shared PLL. */ |
| if (WARN_ON(dpll == DPLL_ID_PRIVATE)) |
| return 0; |
| |
| pll = &dev_priv->shared_dplls[dpll]; |
| state = &pll->state.hw_state; |
| |
| clock.m1 = 2; |
| clock.m2 = (state->pll0 & PORT_PLL_M2_MASK) << 22; |
| if (state->pll3 & PORT_PLL_M2_FRAC_ENABLE) |
| clock.m2 |= state->pll2 & PORT_PLL_M2_FRAC_MASK; |
| clock.n = (state->pll1 & PORT_PLL_N_MASK) >> PORT_PLL_N_SHIFT; |
| clock.p1 = (state->ebb0 & PORT_PLL_P1_MASK) >> PORT_PLL_P1_SHIFT; |
| clock.p2 = (state->ebb0 & PORT_PLL_P2_MASK) >> PORT_PLL_P2_SHIFT; |
| |
| return chv_calc_dpll_params(100000, &clock); |
| } |
| |
| static void bxt_ddi_clock_get(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| enum port port = intel_ddi_get_encoder_port(encoder); |
| uint32_t dpll = port; |
| |
| pipe_config->port_clock = bxt_calc_pll_link(dev_priv, dpll); |
| |
| ddi_dotclock_get(pipe_config); |
| } |
| |
| void intel_ddi_clock_get(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| |
| if (INTEL_GEN(dev_priv) <= 8) |
| hsw_ddi_clock_get(encoder, pipe_config); |
| else if (IS_GEN9_BC(dev_priv)) |
| skl_ddi_clock_get(encoder, pipe_config); |
| else if (IS_GEN9_LP(dev_priv)) |
| bxt_ddi_clock_get(encoder, pipe_config); |
| } |
| |
| void intel_ddi_set_pipe_settings(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_encoder *encoder = intel_ddi_get_crtc_encoder(crtc); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| int type = encoder->type; |
| uint32_t temp; |
| |
| if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP || type == INTEL_OUTPUT_DP_MST) { |
| WARN_ON(transcoder_is_dsi(cpu_transcoder)); |
| |
| temp = TRANS_MSA_SYNC_CLK; |
| switch (crtc_state->pipe_bpp) { |
| case 18: |
| temp |= TRANS_MSA_6_BPC; |
| break; |
| case 24: |
| temp |= TRANS_MSA_8_BPC; |
| break; |
| case 30: |
| temp |= TRANS_MSA_10_BPC; |
| break; |
| case 36: |
| temp |= TRANS_MSA_12_BPC; |
| break; |
| default: |
| BUG(); |
| } |
| I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp); |
| } |
| } |
| |
| void intel_ddi_set_vc_payload_alloc(const struct intel_crtc_state *crtc_state, |
| bool state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| uint32_t temp; |
| temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| if (state == true) |
| temp |= TRANS_DDI_DP_VC_PAYLOAD_ALLOC; |
| else |
| temp &= ~TRANS_DDI_DP_VC_PAYLOAD_ALLOC; |
| I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); |
| } |
| |
| void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); |
| struct intel_encoder *encoder = intel_ddi_get_crtc_encoder(crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| enum port port = intel_ddi_get_encoder_port(encoder); |
| int type = encoder->type; |
| uint32_t temp; |
| |
| /* Enable TRANS_DDI_FUNC_CTL for the pipe to work in HDMI mode */ |
| temp = TRANS_DDI_FUNC_ENABLE; |
| temp |= TRANS_DDI_SELECT_PORT(port); |
| |
| switch (crtc_state->pipe_bpp) { |
| case 18: |
| temp |= TRANS_DDI_BPC_6; |
| break; |
| case 24: |
| temp |= TRANS_DDI_BPC_8; |
| break; |
| case 30: |
| temp |= TRANS_DDI_BPC_10; |
| break; |
| case 36: |
| temp |= TRANS_DDI_BPC_12; |
| break; |
| default: |
| BUG(); |
| } |
| |
| if (crtc_state->base.adjusted_mode.flags & DRM_MODE_FLAG_PVSYNC) |
| temp |= TRANS_DDI_PVSYNC; |
| if (crtc_state->base.adjusted_mode.flags & DRM_MODE_FLAG_PHSYNC) |
| temp |= TRANS_DDI_PHSYNC; |
| |
| if (cpu_transcoder == TRANSCODER_EDP) { |
| switch (pipe) { |
| case PIPE_A: |
| /* On Haswell, can only use the always-on power well for |
| * eDP when not using the panel fitter, and when not |
| * using motion blur mitigation (which we don't |
| * support). */ |
| if (IS_HASWELL(dev_priv) && |
| (crtc_state->pch_pfit.enabled || |
| crtc_state->pch_pfit.force_thru)) |
| temp |= TRANS_DDI_EDP_INPUT_A_ONOFF; |
| else |
| temp |= TRANS_DDI_EDP_INPUT_A_ON; |
| break; |
| case PIPE_B: |
| temp |= TRANS_DDI_EDP_INPUT_B_ONOFF; |
| break; |
| case PIPE_C: |
| temp |= TRANS_DDI_EDP_INPUT_C_ONOFF; |
| break; |
| default: |
| BUG(); |
| break; |
| } |
| } |
| |
| if (type == INTEL_OUTPUT_HDMI) { |
| if (crtc_state->has_hdmi_sink) |
| temp |= TRANS_DDI_MODE_SELECT_HDMI; |
| else |
| temp |= TRANS_DDI_MODE_SELECT_DVI; |
| |
| if (crtc_state->hdmi_scrambling) |
| temp |= TRANS_DDI_HDMI_SCRAMBLING_MASK; |
| if (crtc_state->hdmi_high_tmds_clock_ratio) |
| temp |= TRANS_DDI_HIGH_TMDS_CHAR_RATE; |
| } else if (type == INTEL_OUTPUT_ANALOG) { |
| temp |= TRANS_DDI_MODE_SELECT_FDI; |
| temp |= (crtc_state->fdi_lanes - 1) << 1; |
| } else if (type == INTEL_OUTPUT_DP || |
| type == INTEL_OUTPUT_EDP) { |
| temp |= TRANS_DDI_MODE_SELECT_DP_SST; |
| temp |= DDI_PORT_WIDTH(crtc_state->lane_count); |
| } else if (type == INTEL_OUTPUT_DP_MST) { |
| temp |= TRANS_DDI_MODE_SELECT_DP_MST; |
| temp |= DDI_PORT_WIDTH(crtc_state->lane_count); |
| } else { |
| WARN(1, "Invalid encoder type %d for pipe %c\n", |
| encoder->type, pipe_name(pipe)); |
| } |
| |
| I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); |
| } |
| |
| void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv, |
| enum transcoder cpu_transcoder) |
| { |
| i915_reg_t reg = TRANS_DDI_FUNC_CTL(cpu_transcoder); |
| uint32_t val = I915_READ(reg); |
| |
| val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK | TRANS_DDI_DP_VC_PAYLOAD_ALLOC); |
| val |= TRANS_DDI_PORT_NONE; |
| I915_WRITE(reg, val); |
| } |
| |
| bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector) |
| { |
| struct drm_device *dev = intel_connector->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_encoder *encoder = intel_connector->encoder; |
| int type = intel_connector->base.connector_type; |
| enum port port = intel_ddi_get_encoder_port(encoder); |
| enum pipe pipe = 0; |
| enum transcoder cpu_transcoder; |
| uint32_t tmp; |
| bool ret; |
| |
| if (!intel_display_power_get_if_enabled(dev_priv, |
| encoder->power_domain)) |
| return false; |
| |
| if (!encoder->get_hw_state(encoder, &pipe)) { |
| ret = false; |
| goto out; |
| } |
| |
| if (port == PORT_A) |
| cpu_transcoder = TRANSCODER_EDP; |
| else |
| cpu_transcoder = (enum transcoder) pipe; |
| |
| tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| |
| switch (tmp & TRANS_DDI_MODE_SELECT_MASK) { |
| case TRANS_DDI_MODE_SELECT_HDMI: |
| case TRANS_DDI_MODE_SELECT_DVI: |
| ret = type == DRM_MODE_CONNECTOR_HDMIA; |
| break; |
| |
| case TRANS_DDI_MODE_SELECT_DP_SST: |
| ret = type == DRM_MODE_CONNECTOR_eDP || |
| type == DRM_MODE_CONNECTOR_DisplayPort; |
| break; |
| |
| case TRANS_DDI_MODE_SELECT_DP_MST: |
| /* if the transcoder is in MST state then |
| * connector isn't connected */ |
| ret = false; |
| break; |
| |
| case TRANS_DDI_MODE_SELECT_FDI: |
| ret = type == DRM_MODE_CONNECTOR_VGA; |
| break; |
| |
| default: |
| ret = false; |
| break; |
| } |
| |
| out: |
| intel_display_power_put(dev_priv, encoder->power_domain); |
| |
| return ret; |
| } |
| |
| bool intel_ddi_get_hw_state(struct intel_encoder *encoder, |
| enum pipe *pipe) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| enum port port = intel_ddi_get_encoder_port(encoder); |
| u32 tmp; |
| int i; |
| bool ret; |
| |
| if (!intel_display_power_get_if_enabled(dev_priv, |
| encoder->power_domain)) |
| return false; |
| |
| ret = false; |
| |
| tmp = I915_READ(DDI_BUF_CTL(port)); |
| |
| if (!(tmp & DDI_BUF_CTL_ENABLE)) |
| goto out; |
| |
| if (port == PORT_A) { |
| tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP)); |
| |
| switch (tmp & TRANS_DDI_EDP_INPUT_MASK) { |
| case TRANS_DDI_EDP_INPUT_A_ON: |
| case TRANS_DDI_EDP_INPUT_A_ONOFF: |
| *pipe = PIPE_A; |
| break; |
| case TRANS_DDI_EDP_INPUT_B_ONOFF: |
| *pipe = PIPE_B; |
| break; |
| case TRANS_DDI_EDP_INPUT_C_ONOFF: |
| *pipe = PIPE_C; |
| break; |
| } |
| |
| ret = true; |
| |
| goto out; |
| } |
| |
| for (i = TRANSCODER_A; i <= TRANSCODER_C; i++) { |
| tmp = I915_READ(TRANS_DDI_FUNC_CTL(i)); |
| |
| if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(port)) { |
| if ((tmp & TRANS_DDI_MODE_SELECT_MASK) == |
| TRANS_DDI_MODE_SELECT_DP_MST) |
| goto out; |
| |
| *pipe = i; |
| ret = true; |
| |
| goto out; |
| } |
| } |
| |
| DRM_DEBUG_KMS("No pipe for ddi port %c found\n", port_name(port)); |
| |
| out: |
| if (ret && IS_GEN9_LP(dev_priv)) { |
| tmp = I915_READ(BXT_PHY_CTL(port)); |
| if ((tmp & (BXT_PHY_LANE_POWERDOWN_ACK | |
| BXT_PHY_LANE_ENABLED)) != BXT_PHY_LANE_ENABLED) |
| DRM_ERROR("Port %c enabled but PHY powered down? " |
| "(PHY_CTL %08x)\n", port_name(port), tmp); |
| } |
| |
| intel_display_power_put(dev_priv, encoder->power_domain); |
| |
| return ret; |
| } |
| |
| static u64 intel_ddi_get_power_domains(struct intel_encoder *encoder) |
| { |
| struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); |
| enum pipe pipe; |
| |
| if (intel_ddi_get_hw_state(encoder, &pipe)) |
| return BIT_ULL(dig_port->ddi_io_power_domain); |
| |
| return 0; |
| } |
| |
| void intel_ddi_enable_pipe_clock(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_encoder *encoder = intel_ddi_get_crtc_encoder(crtc); |
| enum port port = intel_ddi_get_encoder_port(encoder); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| |
| if (cpu_transcoder != TRANSCODER_EDP) |
| I915_WRITE(TRANS_CLK_SEL(cpu_transcoder), |
| TRANS_CLK_SEL_PORT(port)); |
| } |
| |
| void intel_ddi_disable_pipe_clock(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| |
| if (cpu_transcoder != TRANSCODER_EDP) |
| I915_WRITE(TRANS_CLK_SEL(cpu_transcoder), |
| TRANS_CLK_SEL_DISABLED); |
| } |
| |
| static void _skl_ddi_set_iboost(struct drm_i915_private *dev_priv, |
| enum port port, uint8_t iboost) |
| { |
| u32 tmp; |
| |
| tmp = I915_READ(DISPIO_CR_TX_BMU_CR0); |
| tmp &= ~(BALANCE_LEG_MASK(port) | BALANCE_LEG_DISABLE(port)); |
| if (iboost) |
| tmp |= iboost << BALANCE_LEG_SHIFT(port); |
| else |
| tmp |= BALANCE_LEG_DISABLE(port); |
| I915_WRITE(DISPIO_CR_TX_BMU_CR0, tmp); |
| } |
| |
| static void skl_ddi_set_iboost(struct intel_encoder *encoder, u32 level) |
| { |
| struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base); |
| struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev); |
| enum port port = intel_dig_port->port; |
| int type = encoder->type; |
| const struct ddi_buf_trans *ddi_translations; |
| uint8_t iboost; |
| uint8_t dp_iboost, hdmi_iboost; |
| int n_entries; |
| |
| /* VBT may override standard boost values */ |
| dp_iboost = dev_priv->vbt.ddi_port_info[port].dp_boost_level; |
| hdmi_iboost = dev_priv->vbt.ddi_port_info[port].hdmi_boost_level; |
| |
| if (type == INTEL_OUTPUT_DP) { |
| if (dp_iboost) { |
| iboost = dp_iboost; |
| } else { |
| if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) |
| ddi_translations = kbl_get_buf_trans_dp(dev_priv, |
| &n_entries); |
| else |
| ddi_translations = skl_get_buf_trans_dp(dev_priv, |
| &n_entries); |
| iboost = ddi_translations[level].i_boost; |
| } |
| } else if (type == INTEL_OUTPUT_EDP) { |
| if (dp_iboost) { |
| iboost = dp_iboost; |
| } else { |
| ddi_translations = skl_get_buf_trans_edp(dev_priv, &n_entries); |
| |
| if (WARN_ON(port != PORT_A && |
| port != PORT_E && n_entries > 9)) |
| n_entries = 9; |
| |
| iboost = ddi_translations[level].i_boost; |
| } |
| } else if (type == INTEL_OUTPUT_HDMI) { |
| if (hdmi_iboost) { |
| iboost = hdmi_iboost; |
| } else { |
| ddi_translations = skl_get_buf_trans_hdmi(dev_priv, &n_entries); |
| iboost = ddi_translations[level].i_boost; |
| } |
| } else { |
| return; |
| } |
| |
| /* Make sure that the requested I_boost is valid */ |
| if (iboost && iboost != 0x1 && iboost != 0x3 && iboost != 0x7) { |
| DRM_ERROR("Invalid I_boost value %u\n", iboost); |
| return; |
| } |
| |
| _skl_ddi_set_iboost(dev_priv, port, iboost); |
| |
| if (port == PORT_A && intel_dig_port->max_lanes == 4) |
| _skl_ddi_set_iboost(dev_priv, PORT_E, iboost); |
| } |
| |
| static void bxt_ddi_vswing_sequence(struct drm_i915_private *dev_priv, |
| u32 level, enum port port, int type) |
| { |
| const struct bxt_ddi_buf_trans *ddi_translations; |
| u32 n_entries, i; |
| |
| if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) { |
| n_entries = ARRAY_SIZE(bxt_ddi_translations_edp); |
| ddi_translations = bxt_ddi_translations_edp; |
| } else if (type == INTEL_OUTPUT_DP |
| || type == INTEL_OUTPUT_EDP) { |
| n_entries = ARRAY_SIZE(bxt_ddi_translations_dp); |
| ddi_translations = bxt_ddi_translations_dp; |
| } else if (type == INTEL_OUTPUT_HDMI) { |
| n_entries = ARRAY_SIZE(bxt_ddi_translations_hdmi); |
| ddi_translations = bxt_ddi_translations_hdmi; |
| } else { |
| DRM_DEBUG_KMS("Vswing programming not done for encoder %d\n", |
| type); |
| return; |
| } |
| |
| /* Check if default value has to be used */ |
| if (level >= n_entries || |
| (type == INTEL_OUTPUT_HDMI && level == HDMI_LEVEL_SHIFT_UNKNOWN)) { |
| for (i = 0; i < n_entries; i++) { |
| if (ddi_translations[i].default_index) { |
| level = i; |
| break; |
| } |
| } |
| } |
| |
| bxt_ddi_phy_set_signal_level(dev_priv, port, |
| ddi_translations[level].margin, |
| ddi_translations[level].scale, |
| ddi_translations[level].enable, |
| ddi_translations[level].deemphasis); |
| } |
| |
| u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| int n_entries; |
| |
| if (encoder->type == INTEL_OUTPUT_EDP) |
| intel_ddi_get_buf_trans_edp(dev_priv, &n_entries); |
| else |
| intel_ddi_get_buf_trans_dp(dev_priv, &n_entries); |
| |
| if (WARN_ON(n_entries < 1)) |
| n_entries = 1; |
| if (WARN_ON(n_entries > ARRAY_SIZE(index_to_dp_signal_levels))) |
| n_entries = ARRAY_SIZE(index_to_dp_signal_levels); |
| |
| return index_to_dp_signal_levels[n_entries - 1] & |
| DP_TRAIN_VOLTAGE_SWING_MASK; |
| } |
| |
| static const struct cnl_ddi_buf_trans * |
| cnl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, |
| u32 voltage, int *n_entries) |
| { |
| if (voltage == VOLTAGE_INFO_0_85V) { |
| *n_entries = ARRAY_SIZE(cnl_ddi_translations_hdmi_0_85V); |
| return cnl_ddi_translations_hdmi_0_85V; |
| } else if (voltage == VOLTAGE_INFO_0_95V) { |
| *n_entries = ARRAY_SIZE(cnl_ddi_translations_hdmi_0_95V); |
| return cnl_ddi_translations_hdmi_0_95V; |
| } else if (voltage == VOLTAGE_INFO_1_05V) { |
| *n_entries = ARRAY_SIZE(cnl_ddi_translations_hdmi_1_05V); |
| return cnl_ddi_translations_hdmi_1_05V; |
| } |
| return NULL; |
| } |
| |
| static const struct cnl_ddi_buf_trans * |
| cnl_get_buf_trans_dp(struct drm_i915_private *dev_priv, |
| u32 voltage, int *n_entries) |
| { |
| if (voltage == VOLTAGE_INFO_0_85V) { |
| *n_entries = ARRAY_SIZE(cnl_ddi_translations_dp_0_85V); |
| return cnl_ddi_translations_dp_0_85V; |
| } else if (voltage == VOLTAGE_INFO_0_95V) { |
| *n_entries = ARRAY_SIZE(cnl_ddi_translations_dp_0_95V); |
| return cnl_ddi_translations_dp_0_95V; |
| } else if (voltage == VOLTAGE_INFO_1_05V) { |
| *n_entries = ARRAY_SIZE(cnl_ddi_translations_dp_1_05V); |
| return cnl_ddi_translations_dp_1_05V; |
| } |
| return NULL; |
| } |
| |
| static const struct cnl_ddi_buf_trans * |
| cnl_get_buf_trans_edp(struct drm_i915_private *dev_priv, |
| u32 voltage, int *n_entries) |
| { |
| if (dev_priv->vbt.edp.low_vswing) { |
| if (voltage == VOLTAGE_INFO_0_85V) { |
| *n_entries = ARRAY_SIZE(cnl_ddi_translations_edp_0_85V); |
| return cnl_ddi_translations_dp_0_85V; |
| } else if (voltage == VOLTAGE_INFO_0_95V) { |
| *n_entries = ARRAY_SIZE(cnl_ddi_translations_edp_0_95V); |
| return cnl_ddi_translations_edp_0_95V; |
| } else if (voltage == VOLTAGE_INFO_1_05V) { |
| *n_entries = ARRAY_SIZE(cnl_ddi_translations_edp_1_05V); |
| return cnl_ddi_translations_edp_1_05V; |
| } |
| return NULL; |
| } else { |
| return cnl_get_buf_trans_dp(dev_priv, voltage, n_entries); |
| } |
| } |
| |
| static void cnl_ddi_vswing_program(struct drm_i915_private *dev_priv, |
| u32 level, enum port port, int type) |
| { |
| const struct cnl_ddi_buf_trans *ddi_translations = NULL; |
| u32 n_entries, val, voltage; |
| int ln; |
| |
| /* |
| * Values for each port type are listed in |
| * voltage swing programming tables. |
| * Vccio voltage found in PORT_COMP_DW3. |
| */ |
| voltage = I915_READ(CNL_PORT_COMP_DW3) & VOLTAGE_INFO_MASK; |
| |
| if (type == INTEL_OUTPUT_HDMI) { |
| ddi_translations = cnl_get_buf_trans_hdmi(dev_priv, |
| voltage, &n_entries); |
| } else if (type == INTEL_OUTPUT_DP) { |
| ddi_translations = cnl_get_buf_trans_dp(dev_priv, |
| voltage, &n_entries); |
| } else if (type == INTEL_OUTPUT_EDP) { |
| ddi_translations = cnl_get_buf_trans_edp(dev_priv, |
| voltage, &n_entries); |
| } |
| |
| if (ddi_translations == NULL) { |
| MISSING_CASE(voltage); |
| return; |
| } |
| |
| if (level >= n_entries) { |
| DRM_DEBUG_KMS("DDI translation not found for level %d. Using %d instead.", level, n_entries - 1); |
| level = n_entries - 1; |
| } |
| |
| /* Set PORT_TX_DW5 Scaling Mode Sel to 010b. */ |
| val = I915_READ(CNL_PORT_TX_DW5_LN0(port)); |
| val &= ~SCALING_MODE_SEL_MASK; |
| val |= SCALING_MODE_SEL(2); |
| I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val); |
| |
| /* Program PORT_TX_DW2 */ |
| val = I915_READ(CNL_PORT_TX_DW2_LN0(port)); |
| val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK | |
| RCOMP_SCALAR_MASK); |
| val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_sel); |
| val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_sel); |
| /* Rcomp scalar is fixed as 0x98 for every table entry */ |
| val |= RCOMP_SCALAR(0x98); |
| I915_WRITE(CNL_PORT_TX_DW2_GRP(port), val); |
| |
| /* Program PORT_TX_DW4 */ |
| /* We cannot write to GRP. It would overrite individual loadgen */ |
| for (ln = 0; ln < 4; ln++) { |
| val = I915_READ(CNL_PORT_TX_DW4_LN(port, ln)); |
| val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK | |
| CURSOR_COEFF_MASK); |
| val |= POST_CURSOR_1(ddi_translations[level].dw4_post_cursor_1); |
| val |= POST_CURSOR_2(ddi_translations[level].dw4_post_cursor_2); |
| val |= CURSOR_COEFF(ddi_translations[level].dw4_cursor_coeff); |
| I915_WRITE(CNL_PORT_TX_DW4_LN(port, ln), val); |
| } |
| |
| /* Program PORT_TX_DW5 */ |
| /* All DW5 values are fixed for every table entry */ |
| val = I915_READ(CNL_PORT_TX_DW5_LN0(port)); |
| val &= ~RTERM_SELECT_MASK; |
| val |= RTERM_SELECT(6); |
| val |= TAP3_DISABLE; |
| I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val); |
| |
| /* Program PORT_TX_DW7 */ |
| val = I915_READ(CNL_PORT_TX_DW7_LN0(port)); |
| val &= ~N_SCALAR_MASK; |
| val |= N_SCALAR(ddi_translations[level].dw7_n_scalar); |
| I915_WRITE(CNL_PORT_TX_DW7_GRP(port), val); |
| } |
| |
| static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder, u32 level) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| enum port port = intel_ddi_get_encoder_port(encoder); |
| int type = encoder->type; |
| int width = 0; |
| int rate = 0; |
| u32 val; |
| int ln = 0; |
| |
| if ((intel_dp) && (type == INTEL_OUTPUT_EDP || type == INTEL_OUTPUT_DP)) { |
| width = intel_dp->lane_count; |
| rate = intel_dp->link_rate; |
| } else { |
| width = 4; |
| /* Rate is always < than 6GHz for HDMI */ |
| } |
| |
| /* |
| * 1. If port type is eDP or DP, |
| * set PORT_PCS_DW1 cmnkeeper_enable to 1b, |
| * else clear to 0b. |
| */ |
| val = I915_READ(CNL_PORT_PCS_DW1_LN0(port)); |
| if (type == INTEL_OUTPUT_EDP || type == INTEL_OUTPUT_DP) |
| val |= COMMON_KEEPER_EN; |
| else |
| val &= ~COMMON_KEEPER_EN; |
| I915_WRITE(CNL_PORT_PCS_DW1_GRP(port), val); |
| |
| /* 2. Program loadgen select */ |
| /* |
| * Program PORT_TX_DW4_LN depending on Bit rate and used lanes |
| * <= 6 GHz and 4 lanes (LN0=0, LN1=1, LN2=1, LN3=1) |
| * <= 6 GHz and 1,2 lanes (LN0=0, LN1=1, LN2=1, LN3=0) |
| * > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0) |
| */ |
| for (ln = 0; ln <= 3; ln++) { |
| val = I915_READ(CNL_PORT_TX_DW4_LN(port, ln)); |
| val &= ~LOADGEN_SELECT; |
| |
| if ((rate <= 600000 && width == 4 && ln >= 1) || |
| (rate <= 600000 && width < 4 && (ln == 1 || ln == 2))) { |
| val |= LOADGEN_SELECT; |
| } |
| I915_WRITE(CNL_PORT_TX_DW4_LN(port, ln), val); |
| } |
| |
| /* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */ |
| val = I915_READ(CNL_PORT_CL1CM_DW5); |
| val |= SUS_CLOCK_CONFIG; |
| I915_WRITE(CNL_PORT_CL1CM_DW5, val); |
| |
| /* 4. Clear training enable to change swing values */ |
| val = I915_READ(CNL_PORT_TX_DW5_LN0(port)); |
| val &= ~TX_TRAINING_EN; |
| I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val); |
| |
| /* 5. Program swing and de-emphasis */ |
| cnl_ddi_vswing_program(dev_priv, level, port, type); |
| |
| /* 6. Set training enable to trigger update */ |
| val = I915_READ(CNL_PORT_TX_DW5_LN0(port)); |
| val |= TX_TRAINING_EN; |
| I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val); |
| } |
| |
| static uint32_t translate_signal_level(int signal_levels) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(index_to_dp_signal_levels); i++) { |
| if (index_to_dp_signal_levels[i] == signal_levels) |
| return i; |
| } |
| |
| WARN(1, "Unsupported voltage swing/pre-emphasis level: 0x%x\n", |
| signal_levels); |
| |
| return 0; |
| } |
| |
| uint32_t ddi_signal_levels(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *dport = dp_to_dig_port(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev); |
| struct intel_encoder *encoder = &dport->base; |
| uint8_t train_set = intel_dp->train_set[0]; |
| int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | |
| DP_TRAIN_PRE_EMPHASIS_MASK); |
| enum port port = dport->port; |
| uint32_t level; |
| |
| level = translate_signal_level(signal_levels); |
| |
| if (IS_GEN9_BC(dev_priv)) |
| skl_ddi_set_iboost(encoder, level); |
| else if (IS_GEN9_LP(dev_priv)) |
| bxt_ddi_vswing_sequence(dev_priv, level, port, encoder->type); |
| else if (IS_CANNONLAKE(dev_priv)) { |
| cnl_ddi_vswing_sequence(encoder, level); |
| /* DDI_BUF_CTL bits 27:24 are reserved on CNL */ |
| return 0; |
| } |
| return DDI_BUF_TRANS_SELECT(level); |
| } |
| |
| static void intel_ddi_clk_select(struct intel_encoder *encoder, |
| struct intel_shared_dpll *pll) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| enum port port = intel_ddi_get_encoder_port(encoder); |
| uint32_t val; |
| |
| if (WARN_ON(!pll)) |
| return; |
| |
| if (IS_CANNONLAKE(dev_priv)) { |
| /* Configure DPCLKA_CFGCR0 to map the DPLL to the DDI. */ |
| val = I915_READ(DPCLKA_CFGCR0); |
| val |= DPCLKA_CFGCR0_DDI_CLK_SEL(pll->id, port); |
| I915_WRITE(DPCLKA_CFGCR0, val); |
| |
| /* |
| * Configure DPCLKA_CFGCR0 to turn on the clock for the DDI. |
| * This step and the step before must be done with separate |
| * register writes. |
| */ |
| val = I915_READ(DPCLKA_CFGCR0); |
| val &= ~(DPCLKA_CFGCR0_DDI_CLK_OFF(port) | |
| DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port)); |
| I915_WRITE(DPCLKA_CFGCR0, val); |
| } else if (IS_GEN9_BC(dev_priv)) { |
| /* DDI -> PLL mapping */ |
| val = I915_READ(DPLL_CTRL2); |
| |
| val &= ~(DPLL_CTRL2_DDI_CLK_OFF(port) | |
| DPLL_CTRL2_DDI_CLK_SEL_MASK(port)); |
| val |= (DPLL_CTRL2_DDI_CLK_SEL(pll->id, port) | |
| DPLL_CTRL2_DDI_SEL_OVERRIDE(port)); |
| |
| I915_WRITE(DPLL_CTRL2, val); |
| |
| } else if (INTEL_INFO(dev_priv)->gen < 9) { |
| I915_WRITE(PORT_CLK_SEL(port), hsw_pll_to_ddi_pll_sel(pll)); |
| } |
| } |
| |
| static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder, |
| int link_rate, uint32_t lane_count, |
| struct intel_shared_dpll *pll, |
| bool link_mst) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| enum port port = intel_ddi_get_encoder_port(encoder); |
| struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); |
| |
| WARN_ON(link_mst && (port == PORT_A || port == PORT_E)); |
| |
| intel_dp_set_link_params(intel_dp, link_rate, lane_count, |
| link_mst); |
| if (encoder->type == INTEL_OUTPUT_EDP) |
| intel_edp_panel_on(intel_dp); |
| |
| intel_ddi_clk_select(encoder, pll); |
| |
| intel_display_power_get(dev_priv, dig_port->ddi_io_power_domain); |
| |
| intel_prepare_dp_ddi_buffers(encoder); |
| intel_ddi_init_dp_buf_reg(encoder); |
| intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); |
| intel_dp_start_link_train(intel_dp); |
| if (port != PORT_A || INTEL_GEN(dev_priv) >= 9) |
| intel_dp_stop_link_train(intel_dp); |
| } |
| |
| static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder, |
| bool has_hdmi_sink, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state, |
| struct intel_shared_dpll *pll) |
| { |
| struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct drm_encoder *drm_encoder = &encoder->base; |
| enum port port = intel_ddi_get_encoder_port(encoder); |
| int level = intel_ddi_hdmi_level(dev_priv, port); |
| struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); |
| |
| intel_dp_dual_mode_set_tmds_output(intel_hdmi, true); |
| intel_ddi_clk_select(encoder, pll); |
| |
| intel_display_power_get(dev_priv, dig_port->ddi_io_power_domain); |
| |
| intel_prepare_hdmi_ddi_buffers(encoder); |
| if (IS_GEN9_BC(dev_priv)) |
| skl_ddi_set_iboost(encoder, level); |
| else if (IS_GEN9_LP(dev_priv)) |
| bxt_ddi_vswing_sequence(dev_priv, level, port, |
| INTEL_OUTPUT_HDMI); |
| else if (IS_CANNONLAKE(dev_priv)) |
| cnl_ddi_vswing_sequence(encoder, level); |
| |
| intel_hdmi->set_infoframes(drm_encoder, |
| has_hdmi_sink, |
| crtc_state, conn_state); |
| } |
| |
| static void intel_ddi_pre_enable(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config, |
| struct drm_connector_state *conn_state) |
| { |
| int type = encoder->type; |
| |
| if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP) { |
| intel_ddi_pre_enable_dp(encoder, |
| pipe_config->port_clock, |
| pipe_config->lane_count, |
| pipe_config->shared_dpll, |
| intel_crtc_has_type(pipe_config, |
| INTEL_OUTPUT_DP_MST)); |
| } |
| if (type == INTEL_OUTPUT_HDMI) { |
| intel_ddi_pre_enable_hdmi(encoder, |
| pipe_config->has_hdmi_sink, |
| pipe_config, conn_state, |
| pipe_config->shared_dpll); |
| } |
| } |
| |
| static void intel_ddi_post_disable(struct intel_encoder *intel_encoder, |
| struct intel_crtc_state *old_crtc_state, |
| struct drm_connector_state *old_conn_state) |
| { |
| struct drm_encoder *encoder = &intel_encoder->base; |
| struct drm_i915_private *dev_priv = to_i915(encoder->dev); |
| enum port port = intel_ddi_get_encoder_port(intel_encoder); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| struct intel_dp *intel_dp = NULL; |
| int type = intel_encoder->type; |
| uint32_t val; |
| bool wait = false; |
| |
| /* old_crtc_state and old_conn_state are NULL when called from DP_MST */ |
| |
| if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP) { |
| intel_dp = enc_to_intel_dp(encoder); |
| intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); |
| } |
| |
| val = I915_READ(DDI_BUF_CTL(port)); |
| if (val & DDI_BUF_CTL_ENABLE) { |
| val &= ~DDI_BUF_CTL_ENABLE; |
| I915_WRITE(DDI_BUF_CTL(port), val); |
| wait = true; |
| } |
| |
| val = I915_READ(DP_TP_CTL(port)); |
| val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); |
| val |= DP_TP_CTL_LINK_TRAIN_PAT1; |
| I915_WRITE(DP_TP_CTL(port), val); |
| |
| if (wait) |
| intel_wait_ddi_buf_idle(dev_priv, port); |
| |
| if (intel_dp) { |
| intel_edp_panel_vdd_on(intel_dp); |
| intel_edp_panel_off(intel_dp); |
| } |
| |
| if (dig_port) |
| intel_display_power_put(dev_priv, dig_port->ddi_io_power_domain); |
| |
| if (IS_CANNONLAKE(dev_priv)) |
| I915_WRITE(DPCLKA_CFGCR0, I915_READ(DPCLKA_CFGCR0) | |
| DPCLKA_CFGCR0_DDI_CLK_OFF(port)); |
| else if (IS_GEN9_BC(dev_priv)) |
| I915_WRITE(DPLL_CTRL2, (I915_READ(DPLL_CTRL2) | |
| DPLL_CTRL2_DDI_CLK_OFF(port))); |
| else if (INTEL_GEN(dev_priv) < 9) |
| I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE); |
| |
| if (type == INTEL_OUTPUT_HDMI) { |
| struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); |
| |
| intel_dp_dual_mode_set_tmds_output(intel_hdmi, false); |
| } |
| } |
| |
| void intel_ddi_fdi_post_disable(struct intel_encoder *encoder, |
| struct intel_crtc_state *old_crtc_state, |
| struct drm_connector_state *old_conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| uint32_t val; |
| |
| /* |
| * Bspec lists this as both step 13 (before DDI_BUF_CTL disable) |
| * and step 18 (after clearing PORT_CLK_SEL). Based on a BUN, |
| * step 13 is the correct place for it. Step 18 is where it was |
| * originally before the BUN. |
| */ |
| val = I915_READ(FDI_RX_CTL(PIPE_A)); |
| val &= ~FDI_RX_ENABLE; |
| I915_WRITE(FDI_RX_CTL(PIPE_A), val); |
| |
| intel_ddi_post_disable(encoder, old_crtc_state, old_conn_state); |
| |
| val = I915_READ(FDI_RX_MISC(PIPE_A)); |
| val &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); |
| val |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2); |
| I915_WRITE(FDI_RX_MISC(PIPE_A), val); |
| |
| val = I915_READ(FDI_RX_CTL(PIPE_A)); |
| val &= ~FDI_PCDCLK; |
| I915_WRITE(FDI_RX_CTL(PIPE_A), val); |
| |
| val = I915_READ(FDI_RX_CTL(PIPE_A)); |
| val &= ~FDI_RX_PLL_ENABLE; |
| I915_WRITE(FDI_RX_CTL(PIPE_A), val); |
| } |
| |
| static void intel_enable_ddi(struct intel_encoder *intel_encoder, |
| struct intel_crtc_state *pipe_config, |
| struct drm_connector_state *conn_state) |
| { |
| struct drm_encoder *encoder = &intel_encoder->base; |
| struct drm_i915_private *dev_priv = to_i915(encoder->dev); |
| enum port port = intel_ddi_get_encoder_port(intel_encoder); |
| int type = intel_encoder->type; |
| |
| if (type == INTEL_OUTPUT_HDMI) { |
| struct intel_digital_port *intel_dig_port = |
| enc_to_dig_port(encoder); |
| bool clock_ratio = pipe_config->hdmi_high_tmds_clock_ratio; |
| bool scrambling = pipe_config->hdmi_scrambling; |
| |
| intel_hdmi_handle_sink_scrambling(intel_encoder, |
| conn_state->connector, |
| clock_ratio, scrambling); |
| |
| /* In HDMI/DVI mode, the port width, and swing/emphasis values |
| * are ignored so nothing special needs to be done besides |
| * enabling the port. |
| */ |
| I915_WRITE(DDI_BUF_CTL(port), |
| intel_dig_port->saved_port_bits | |
| DDI_BUF_CTL_ENABLE); |
| } else if (type == INTEL_OUTPUT_EDP) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| if (port == PORT_A && INTEL_GEN(dev_priv) < 9) |
| intel_dp_stop_link_train(intel_dp); |
| |
| intel_edp_backlight_on(pipe_config, conn_state); |
| intel_psr_enable(intel_dp); |
| intel_edp_drrs_enable(intel_dp, pipe_config); |
| } |
| |
| if (pipe_config->has_audio) |
| intel_audio_codec_enable(intel_encoder, pipe_config, conn_state); |
| } |
| |
| static void intel_disable_ddi(struct intel_encoder *intel_encoder, |
| struct intel_crtc_state *old_crtc_state, |
| struct drm_connector_state *old_conn_state) |
| { |
| struct drm_encoder *encoder = &intel_encoder->base; |
| int type = intel_encoder->type; |
| |
| if (old_crtc_state->has_audio) |
| intel_audio_codec_disable(intel_encoder); |
| |
| if (type == INTEL_OUTPUT_HDMI) { |
| intel_hdmi_handle_sink_scrambling(intel_encoder, |
| old_conn_state->connector, |
| false, false); |
| } |
| |
| if (type == INTEL_OUTPUT_EDP) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| intel_edp_drrs_disable(intel_dp, old_crtc_state); |
| intel_psr_disable(intel_dp); |
| intel_edp_backlight_off(old_conn_state); |
| } |
| } |
| |
| static void bxt_ddi_pre_pll_enable(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config, |
| struct drm_connector_state *conn_state) |
| { |
| uint8_t mask = pipe_config->lane_lat_optim_mask; |
| |
| bxt_ddi_phy_set_lane_optim_mask(encoder, mask); |
| } |
| |
| void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct drm_i915_private *dev_priv = |
| to_i915(intel_dig_port->base.base.dev); |
| enum port port = intel_dig_port->port; |
| uint32_t val; |
| bool wait = false; |
| |
| if (I915_READ(DP_TP_CTL(port)) & DP_TP_CTL_ENABLE) { |
| val = I915_READ(DDI_BUF_CTL(port)); |
| if (val & DDI_BUF_CTL_ENABLE) { |
| val &= ~DDI_BUF_CTL_ENABLE; |
| I915_WRITE(DDI_BUF_CTL(port), val); |
| wait = true; |
| } |
| |
| val = I915_READ(DP_TP_CTL(port)); |
| val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); |
| val |= DP_TP_CTL_LINK_TRAIN_PAT1; |
| I915_WRITE(DP_TP_CTL(port), val); |
| POSTING_READ(DP_TP_CTL(port)); |
| |
| if (wait) |
| intel_wait_ddi_buf_idle(dev_priv, port); |
| } |
| |
| val = DP_TP_CTL_ENABLE | |
| DP_TP_CTL_LINK_TRAIN_PAT1 | DP_TP_CTL_SCRAMBLE_DISABLE; |
| if (intel_dp->link_mst) |
| val |= DP_TP_CTL_MODE_MST; |
| else { |
| val |= DP_TP_CTL_MODE_SST; |
| if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) |
| val |= DP_TP_CTL_ENHANCED_FRAME_ENABLE; |
| } |
| I915_WRITE(DP_TP_CTL(port), val); |
| POSTING_READ(DP_TP_CTL(port)); |
| |
| intel_dp->DP |= DDI_BUF_CTL_ENABLE; |
| I915_WRITE(DDI_BUF_CTL(port), intel_dp->DP); |
| POSTING_READ(DDI_BUF_CTL(port)); |
| |
| udelay(600); |
| } |
| |
| bool intel_ddi_is_audio_enabled(struct drm_i915_private *dev_priv, |
| struct intel_crtc *intel_crtc) |
| { |
| u32 temp; |
| |
| if (intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_AUDIO)) { |
| temp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); |
| if (temp & AUDIO_OUTPUT_ENABLE(intel_crtc->pipe)) |
| return true; |
| } |
| return false; |
| } |
| |
| void intel_ddi_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); |
| enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; |
| struct intel_hdmi *intel_hdmi; |
| u32 temp, flags = 0; |
| |
| /* XXX: DSI transcoder paranoia */ |
| if (WARN_ON(transcoder_is_dsi(cpu_transcoder))) |
| return; |
| |
| temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| if (temp & TRANS_DDI_PHSYNC) |
| flags |= DRM_MODE_FLAG_PHSYNC; |
| else |
| flags |= DRM_MODE_FLAG_NHSYNC; |
| if (temp & TRANS_DDI_PVSYNC) |
| flags |= DRM_MODE_FLAG_PVSYNC; |
| else |
| flags |= DRM_MODE_FLAG_NVSYNC; |
| |
| pipe_config->base.adjusted_mode.flags |= flags; |
| |
| switch (temp & TRANS_DDI_BPC_MASK) { |
| case TRANS_DDI_BPC_6: |
| pipe_config->pipe_bpp = 18; |
| break; |
| case TRANS_DDI_BPC_8: |
| pipe_config->pipe_bpp = 24; |
| break; |
| case TRANS_DDI_BPC_10: |
| pipe_config->pipe_bpp = 30; |
| break; |
| case TRANS_DDI_BPC_12: |
| pipe_config->pipe_bpp = 36; |
| break; |
| default: |
| break; |
| } |
| |
| switch (temp & TRANS_DDI_MODE_SELECT_MASK) { |
| case TRANS_DDI_MODE_SELECT_HDMI: |
| pipe_config->has_hdmi_sink = true; |
| intel_hdmi = enc_to_intel_hdmi(&encoder->base); |
| |
| if (intel_hdmi->infoframe_enabled(&encoder->base, pipe_config)) |
| pipe_config->has_infoframe = true; |
| |
| if ((temp & TRANS_DDI_HDMI_SCRAMBLING_MASK) == |
| TRANS_DDI_HDMI_SCRAMBLING_MASK) |
| pipe_config->hdmi_scrambling = true; |
| if (temp & TRANS_DDI_HIGH_TMDS_CHAR_RATE) |
| pipe_config->hdmi_high_tmds_clock_ratio = true; |
| /* fall through */ |
| case TRANS_DDI_MODE_SELECT_DVI: |
| pipe_config->lane_count = 4; |
| break; |
| case TRANS_DDI_MODE_SELECT_FDI: |
| break; |
| case TRANS_DDI_MODE_SELECT_DP_SST: |
| case TRANS_DDI_MODE_SELECT_DP_MST: |
| pipe_config->lane_count = |
| ((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1; |
| intel_dp_get_m_n(intel_crtc, pipe_config); |
| break; |
| default: |
| break; |
| } |
| |
| pipe_config->has_audio = |
| intel_ddi_is_audio_enabled(dev_priv, intel_crtc); |
| |
| if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.bpp && |
| pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) { |
| /* |
| * This is a big fat ugly hack. |
| * |
| * Some machines in UEFI boot mode provide us a VBT that has 18 |
| * bpp and 1.62 GHz link bandwidth for eDP, which for reasons |
| * unknown we fail to light up. Yet the same BIOS boots up with |
| * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as |
| * max, not what it tells us to use. |
| * |
| * Note: This will still be broken if the eDP panel is not lit |
| * up by the BIOS, and thus we can't get the mode at module |
| * load. |
| */ |
| DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", |
| pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp); |
| dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp; |
| } |
| |
| intel_ddi_clock_get(encoder, pipe_config); |
| |
| if (IS_GEN9_LP(dev_priv)) |
| pipe_config->lane_lat_optim_mask = |
| bxt_ddi_phy_get_lane_lat_optim_mask(encoder); |
| } |
| |
| static bool intel_ddi_compute_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config, |
| struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| int type = encoder->type; |
| int port = intel_ddi_get_encoder_port(encoder); |
| int ret; |
| |
| WARN(type == INTEL_OUTPUT_UNKNOWN, "compute_config() on unknown output!\n"); |
| |
| if (port == PORT_A) |
| pipe_config->cpu_transcoder = TRANSCODER_EDP; |
| |
| if (type == INTEL_OUTPUT_HDMI) |
| ret = intel_hdmi_compute_config(encoder, pipe_config, conn_state); |
| else |
| ret = intel_dp_compute_config(encoder, pipe_config, conn_state); |
| |
| if (IS_GEN9_LP(dev_priv) && ret) |
| pipe_config->lane_lat_optim_mask = |
| bxt_ddi_phy_calc_lane_lat_optim_mask(encoder, |
| pipe_config->lane_count); |
| |
| return ret; |
| |
| } |
| |
| static const struct drm_encoder_funcs intel_ddi_funcs = { |
| .reset = intel_dp_encoder_reset, |
| .destroy = intel_dp_encoder_destroy, |
| }; |
| |
| static struct intel_connector * |
| intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port) |
| { |
| struct intel_connector *connector; |
| enum port port = intel_dig_port->port; |
| |
| connector = intel_connector_alloc(); |
| if (!connector) |
| return NULL; |
| |
| intel_dig_port->dp.output_reg = DDI_BUF_CTL(port); |
| if (!intel_dp_init_connector(intel_dig_port, connector)) { |
| kfree(connector); |
| return NULL; |
| } |
| |
| return connector; |
| } |
| |
| static struct intel_connector * |
| intel_ddi_init_hdmi_connector(struct intel_digital_port *intel_dig_port) |
| { |
| struct intel_connector *connector; |
| enum port port = intel_dig_port->port; |
| |
| connector = intel_connector_alloc(); |
| if (!connector) |
| return NULL; |
| |
| intel_dig_port->hdmi.hdmi_reg = DDI_BUF_CTL(port); |
| intel_hdmi_init_connector(intel_dig_port, connector); |
| |
| return connector; |
| } |
| |
| void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port) |
| { |
| struct intel_digital_port *intel_dig_port; |
| struct intel_encoder *intel_encoder; |
| struct drm_encoder *encoder; |
| bool init_hdmi, init_dp, init_lspcon = false; |
| int max_lanes; |
| |
| if (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES) { |
| switch (port) { |
| case PORT_A: |
| max_lanes = 4; |
| break; |
| case PORT_E: |
| max_lanes = 0; |
| break; |
| default: |
| max_lanes = 4; |
| break; |
| } |
| } else { |
| switch (port) { |
| case PORT_A: |
| max_lanes = 2; |
| break; |
| case PORT_E: |
| max_lanes = 2; |
| break; |
| default: |
| max_lanes = 4; |
| break; |
| } |
| } |
| |
| init_hdmi = (dev_priv->vbt.ddi_port_info[port].supports_dvi || |
| dev_priv->vbt.ddi_port_info[port].supports_hdmi); |
| init_dp = dev_priv->vbt.ddi_port_info[port].supports_dp; |
| |
| if (intel_bios_is_lspcon_present(dev_priv, port)) { |
| /* |
| * Lspcon device needs to be driven with DP connector |
| * with special detection sequence. So make sure DP |
| * is initialized before lspcon. |
| */ |
| init_dp = true; |
| init_lspcon = true; |
| init_hdmi = false; |
| DRM_DEBUG_KMS("VBT says port %c has lspcon\n", port_name(port)); |
| } |
| |
| if (!init_dp && !init_hdmi) { |
| DRM_DEBUG_KMS("VBT says port %c is not DVI/HDMI/DP compatible, respect it\n", |
| port_name(port)); |
| return; |
| } |
| |
| intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL); |
| if (!intel_dig_port) |
| return; |
| |
| intel_encoder = &intel_dig_port->base; |
| encoder = &intel_encoder->base; |
| |
| drm_encoder_init(&dev_priv->drm, encoder, &intel_ddi_funcs, |
| DRM_MODE_ENCODER_TMDS, "DDI %c", port_name(port)); |
| |
| intel_encoder->compute_config = intel_ddi_compute_config; |
| intel_encoder->enable = intel_enable_ddi; |
| if (IS_GEN9_LP(dev_priv)) |
| intel_encoder->pre_pll_enable = bxt_ddi_pre_pll_enable; |
| intel_encoder->pre_enable = intel_ddi_pre_enable; |
| intel_encoder->disable = intel_disable_ddi; |
| intel_encoder->post_disable = intel_ddi_post_disable; |
| intel_encoder->get_hw_state = intel_ddi_get_hw_state; |
| intel_encoder->get_config = intel_ddi_get_config; |
| intel_encoder->suspend = intel_dp_encoder_suspend; |
| intel_encoder->get_power_domains = intel_ddi_get_power_domains; |
| |
| intel_dig_port->port = port; |
| intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) & |
| (DDI_BUF_PORT_REVERSAL | |
| DDI_A_4_LANES); |
| |
| switch (port) { |
| case PORT_A: |
| intel_dig_port->ddi_io_power_domain = |
| POWER_DOMAIN_PORT_DDI_A_IO; |
| break; |
| case PORT_B: |
| intel_dig_port->ddi_io_power_domain = |
| POWER_DOMAIN_PORT_DDI_B_IO; |
| break; |
| case PORT_C: |
| intel_dig_port->ddi_io_power_domain = |
| POWER_DOMAIN_PORT_DDI_C_IO; |
| break; |
| case PORT_D: |
| intel_dig_port->ddi_io_power_domain = |
| POWER_DOMAIN_PORT_DDI_D_IO; |
| break; |
| case PORT_E: |
| intel_dig_port->ddi_io_power_domain = |
| POWER_DOMAIN_PORT_DDI_E_IO; |
| break; |
| default: |
| MISSING_CASE(port); |
| } |
| |
| /* |
| * Bspec says that DDI_A_4_LANES is the only supported configuration |
| * for Broxton. Yet some BIOS fail to set this bit on port A if eDP |
| * wasn't lit up at boot. Force this bit on in our internal |
| * configuration so that we use the proper lane count for our |
| * calculations. |
| */ |
| if (IS_GEN9_LP(dev_priv) && port == PORT_A) { |
| if (!(intel_dig_port->saved_port_bits & DDI_A_4_LANES)) { |
| DRM_DEBUG_KMS("BXT BIOS forgot to set DDI_A_4_LANES for port A; fixing\n"); |
| intel_dig_port->saved_port_bits |= DDI_A_4_LANES; |
| max_lanes = 4; |
| } |
| } |
| |
| intel_dig_port->max_lanes = max_lanes; |
| |
| intel_encoder->type = INTEL_OUTPUT_UNKNOWN; |
| intel_encoder->power_domain = intel_port_to_power_domain(port); |
| intel_encoder->port = port; |
| intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); |
| intel_encoder->cloneable = 0; |
| |
| if (init_dp) { |
| if (!intel_ddi_init_dp_connector(intel_dig_port)) |
| goto err; |
| |
| intel_dig_port->hpd_pulse = intel_dp_hpd_pulse; |
| dev_priv->hotplug.irq_port[port] = intel_dig_port; |
| } |
| |
| /* In theory we don't need the encoder->type check, but leave it just in |
| * case we have some really bad VBTs... */ |
| if (intel_encoder->type != INTEL_OUTPUT_EDP && init_hdmi) { |
| if (!intel_ddi_init_hdmi_connector(intel_dig_port)) |
| goto err; |
| } |
| |
| if (init_lspcon) { |
| if (lspcon_init(intel_dig_port)) |
| /* TODO: handle hdmi info frame part */ |
| DRM_DEBUG_KMS("LSPCON init success on port %c\n", |
| port_name(port)); |
| else |
| /* |
| * LSPCON init faied, but DP init was success, so |
| * lets try to drive as DP++ port. |
| */ |
| DRM_ERROR("LSPCON init failed on port %c\n", |
| port_name(port)); |
| } |
| |
| return; |
| |
| err: |
| drm_encoder_cleanup(encoder); |
| kfree(intel_dig_port); |
| } |