| /* |
| * Support PCI/PCIe on PowerNV platforms |
| * |
| * Currently supports only P5IOC2 |
| * |
| * Copyright 2011 Benjamin Herrenschmidt, IBM Corp. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/bootmem.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| #include <linux/msi.h> |
| |
| #include <asm/sections.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/machdep.h> |
| #include <asm/msi_bitmap.h> |
| #include <asm/ppc-pci.h> |
| #include <asm/opal.h> |
| #include <asm/iommu.h> |
| #include <asm/tce.h> |
| #include <asm/firmware.h> |
| |
| #include "powernv.h" |
| #include "pci.h" |
| |
| /* Delay in usec */ |
| #define PCI_RESET_DELAY_US 3000000 |
| |
| #define cfg_dbg(fmt...) do { } while(0) |
| //#define cfg_dbg(fmt...) printk(fmt) |
| |
| #ifdef CONFIG_PCI_MSI |
| static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type) |
| { |
| struct pci_controller *hose = pci_bus_to_host(pdev->bus); |
| struct pnv_phb *phb = hose->private_data; |
| struct pci_dn *pdn = pci_get_pdn(pdev); |
| |
| if (pdn && pdn->force_32bit_msi && !phb->msi32_support) |
| return -ENODEV; |
| |
| return (phb && phb->msi_bmp.bitmap) ? 0 : -ENODEV; |
| } |
| |
| static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) |
| { |
| struct pci_controller *hose = pci_bus_to_host(pdev->bus); |
| struct pnv_phb *phb = hose->private_data; |
| struct msi_desc *entry; |
| struct msi_msg msg; |
| int hwirq; |
| unsigned int virq; |
| int rc; |
| |
| if (WARN_ON(!phb)) |
| return -ENODEV; |
| |
| list_for_each_entry(entry, &pdev->msi_list, list) { |
| if (!entry->msi_attrib.is_64 && !phb->msi32_support) { |
| pr_warn("%s: Supports only 64-bit MSIs\n", |
| pci_name(pdev)); |
| return -ENXIO; |
| } |
| hwirq = msi_bitmap_alloc_hwirqs(&phb->msi_bmp, 1); |
| if (hwirq < 0) { |
| pr_warn("%s: Failed to find a free MSI\n", |
| pci_name(pdev)); |
| return -ENOSPC; |
| } |
| virq = irq_create_mapping(NULL, phb->msi_base + hwirq); |
| if (virq == NO_IRQ) { |
| pr_warn("%s: Failed to map MSI to linux irq\n", |
| pci_name(pdev)); |
| msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, 1); |
| return -ENOMEM; |
| } |
| rc = phb->msi_setup(phb, pdev, phb->msi_base + hwirq, |
| virq, entry->msi_attrib.is_64, &msg); |
| if (rc) { |
| pr_warn("%s: Failed to setup MSI\n", pci_name(pdev)); |
| irq_dispose_mapping(virq); |
| msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, 1); |
| return rc; |
| } |
| irq_set_msi_desc(virq, entry); |
| write_msi_msg(virq, &msg); |
| } |
| return 0; |
| } |
| |
| static void pnv_teardown_msi_irqs(struct pci_dev *pdev) |
| { |
| struct pci_controller *hose = pci_bus_to_host(pdev->bus); |
| struct pnv_phb *phb = hose->private_data; |
| struct msi_desc *entry; |
| |
| if (WARN_ON(!phb)) |
| return; |
| |
| list_for_each_entry(entry, &pdev->msi_list, list) { |
| if (entry->irq == NO_IRQ) |
| continue; |
| irq_set_msi_desc(entry->irq, NULL); |
| msi_bitmap_free_hwirqs(&phb->msi_bmp, |
| virq_to_hw(entry->irq) - phb->msi_base, 1); |
| irq_dispose_mapping(entry->irq); |
| } |
| } |
| #endif /* CONFIG_PCI_MSI */ |
| |
| static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb) |
| { |
| struct OpalIoP7IOCPhbErrorData *data = &phb->diag.p7ioc; |
| int i; |
| |
| pr_info("PHB %d diagnostic data:\n", phb->hose->global_number); |
| |
| pr_info(" brdgCtl = 0x%08x\n", data->brdgCtl); |
| |
| pr_info(" portStatusReg = 0x%08x\n", data->portStatusReg); |
| pr_info(" rootCmplxStatus = 0x%08x\n", data->rootCmplxStatus); |
| pr_info(" busAgentStatus = 0x%08x\n", data->busAgentStatus); |
| |
| pr_info(" deviceStatus = 0x%08x\n", data->deviceStatus); |
| pr_info(" slotStatus = 0x%08x\n", data->slotStatus); |
| pr_info(" linkStatus = 0x%08x\n", data->linkStatus); |
| pr_info(" devCmdStatus = 0x%08x\n", data->devCmdStatus); |
| pr_info(" devSecStatus = 0x%08x\n", data->devSecStatus); |
| |
| pr_info(" rootErrorStatus = 0x%08x\n", data->rootErrorStatus); |
| pr_info(" uncorrErrorStatus = 0x%08x\n", data->uncorrErrorStatus); |
| pr_info(" corrErrorStatus = 0x%08x\n", data->corrErrorStatus); |
| pr_info(" tlpHdr1 = 0x%08x\n", data->tlpHdr1); |
| pr_info(" tlpHdr2 = 0x%08x\n", data->tlpHdr2); |
| pr_info(" tlpHdr3 = 0x%08x\n", data->tlpHdr3); |
| pr_info(" tlpHdr4 = 0x%08x\n", data->tlpHdr4); |
| pr_info(" sourceId = 0x%08x\n", data->sourceId); |
| |
| pr_info(" errorClass = 0x%016llx\n", data->errorClass); |
| pr_info(" correlator = 0x%016llx\n", data->correlator); |
| |
| pr_info(" p7iocPlssr = 0x%016llx\n", data->p7iocPlssr); |
| pr_info(" p7iocCsr = 0x%016llx\n", data->p7iocCsr); |
| pr_info(" lemFir = 0x%016llx\n", data->lemFir); |
| pr_info(" lemErrorMask = 0x%016llx\n", data->lemErrorMask); |
| pr_info(" lemWOF = 0x%016llx\n", data->lemWOF); |
| pr_info(" phbErrorStatus = 0x%016llx\n", data->phbErrorStatus); |
| pr_info(" phbFirstErrorStatus = 0x%016llx\n", data->phbFirstErrorStatus); |
| pr_info(" phbErrorLog0 = 0x%016llx\n", data->phbErrorLog0); |
| pr_info(" phbErrorLog1 = 0x%016llx\n", data->phbErrorLog1); |
| pr_info(" mmioErrorStatus = 0x%016llx\n", data->mmioErrorStatus); |
| pr_info(" mmioFirstErrorStatus = 0x%016llx\n", data->mmioFirstErrorStatus); |
| pr_info(" mmioErrorLog0 = 0x%016llx\n", data->mmioErrorLog0); |
| pr_info(" mmioErrorLog1 = 0x%016llx\n", data->mmioErrorLog1); |
| pr_info(" dma0ErrorStatus = 0x%016llx\n", data->dma0ErrorStatus); |
| pr_info(" dma0FirstErrorStatus = 0x%016llx\n", data->dma0FirstErrorStatus); |
| pr_info(" dma0ErrorLog0 = 0x%016llx\n", data->dma0ErrorLog0); |
| pr_info(" dma0ErrorLog1 = 0x%016llx\n", data->dma0ErrorLog1); |
| pr_info(" dma1ErrorStatus = 0x%016llx\n", data->dma1ErrorStatus); |
| pr_info(" dma1FirstErrorStatus = 0x%016llx\n", data->dma1FirstErrorStatus); |
| pr_info(" dma1ErrorLog0 = 0x%016llx\n", data->dma1ErrorLog0); |
| pr_info(" dma1ErrorLog1 = 0x%016llx\n", data->dma1ErrorLog1); |
| |
| for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) { |
| if ((data->pestA[i] >> 63) == 0 && |
| (data->pestB[i] >> 63) == 0) |
| continue; |
| pr_info(" PE[%3d] PESTA = 0x%016llx\n", i, data->pestA[i]); |
| pr_info(" PESTB = 0x%016llx\n", data->pestB[i]); |
| } |
| } |
| |
| static void pnv_pci_dump_phb_diag_data(struct pnv_phb *phb) |
| { |
| switch(phb->model) { |
| case PNV_PHB_MODEL_P7IOC: |
| pnv_pci_dump_p7ioc_diag_data(phb); |
| break; |
| default: |
| pr_warning("PCI %d: Can't decode this PHB diag data\n", |
| phb->hose->global_number); |
| } |
| } |
| |
| static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no) |
| { |
| unsigned long flags, rc; |
| int has_diag; |
| |
| spin_lock_irqsave(&phb->lock, flags); |
| |
| rc = opal_pci_get_phb_diag_data(phb->opal_id, phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE); |
| has_diag = (rc == OPAL_SUCCESS); |
| |
| rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, |
| OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); |
| if (rc) { |
| pr_warning("PCI %d: Failed to clear EEH freeze state" |
| " for PE#%d, err %ld\n", |
| phb->hose->global_number, pe_no, rc); |
| |
| /* For now, let's only display the diag buffer when we fail to clear |
| * the EEH status. We'll do more sensible things later when we have |
| * proper EEH support. We need to make sure we don't pollute ourselves |
| * with the normal errors generated when probing empty slots |
| */ |
| if (has_diag) |
| pnv_pci_dump_phb_diag_data(phb); |
| else |
| pr_warning("PCI %d: No diag data available\n", |
| phb->hose->global_number); |
| } |
| |
| spin_unlock_irqrestore(&phb->lock, flags); |
| } |
| |
| static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus, |
| u32 bdfn) |
| { |
| s64 rc; |
| u8 fstate; |
| u16 pcierr; |
| u32 pe_no; |
| |
| /* Get PE# if we support IODA */ |
| pe_no = phb->bdfn_to_pe ? phb->bdfn_to_pe(phb, bus, bdfn & 0xff) : 0; |
| |
| /* Read freeze status */ |
| rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, &fstate, &pcierr, |
| NULL); |
| if (rc) { |
| pr_warning("PCI %d: Failed to read EEH status for PE#%d," |
| " err %lld\n", phb->hose->global_number, pe_no, rc); |
| return; |
| } |
| cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n", |
| bdfn, pe_no, fstate); |
| if (fstate != 0) |
| pnv_pci_handle_eeh_config(phb, pe_no); |
| } |
| |
| static int pnv_pci_read_config(struct pci_bus *bus, |
| unsigned int devfn, |
| int where, int size, u32 *val) |
| { |
| struct pci_controller *hose = pci_bus_to_host(bus); |
| struct pnv_phb *phb = hose->private_data; |
| u32 bdfn = (((uint64_t)bus->number) << 8) | devfn; |
| s64 rc; |
| |
| if (hose == NULL) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| switch (size) { |
| case 1: { |
| u8 v8; |
| rc = opal_pci_config_read_byte(phb->opal_id, bdfn, where, &v8); |
| *val = (rc == OPAL_SUCCESS) ? v8 : 0xff; |
| break; |
| } |
| case 2: { |
| u16 v16; |
| rc = opal_pci_config_read_half_word(phb->opal_id, bdfn, where, |
| &v16); |
| *val = (rc == OPAL_SUCCESS) ? v16 : 0xffff; |
| break; |
| } |
| case 4: { |
| u32 v32; |
| rc = opal_pci_config_read_word(phb->opal_id, bdfn, where, &v32); |
| *val = (rc == OPAL_SUCCESS) ? v32 : 0xffffffff; |
| break; |
| } |
| default: |
| return PCIBIOS_FUNC_NOT_SUPPORTED; |
| } |
| cfg_dbg("pnv_pci_read_config bus: %x devfn: %x +%x/%x -> %08x\n", |
| bus->number, devfn, where, size, *val); |
| |
| /* Check if the PHB got frozen due to an error (no response) */ |
| pnv_pci_config_check_eeh(phb, bus, bdfn); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int pnv_pci_write_config(struct pci_bus *bus, |
| unsigned int devfn, |
| int where, int size, u32 val) |
| { |
| struct pci_controller *hose = pci_bus_to_host(bus); |
| struct pnv_phb *phb = hose->private_data; |
| u32 bdfn = (((uint64_t)bus->number) << 8) | devfn; |
| |
| if (hose == NULL) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| cfg_dbg("pnv_pci_write_config bus: %x devfn: %x +%x/%x -> %08x\n", |
| bus->number, devfn, where, size, val); |
| switch (size) { |
| case 1: |
| opal_pci_config_write_byte(phb->opal_id, bdfn, where, val); |
| break; |
| case 2: |
| opal_pci_config_write_half_word(phb->opal_id, bdfn, where, val); |
| break; |
| case 4: |
| opal_pci_config_write_word(phb->opal_id, bdfn, where, val); |
| break; |
| default: |
| return PCIBIOS_FUNC_NOT_SUPPORTED; |
| } |
| /* Check if the PHB got frozen due to an error (no response) */ |
| pnv_pci_config_check_eeh(phb, bus, bdfn); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| struct pci_ops pnv_pci_ops = { |
| .read = pnv_pci_read_config, |
| .write = pnv_pci_write_config, |
| }; |
| |
| static int pnv_tce_build(struct iommu_table *tbl, long index, long npages, |
| unsigned long uaddr, enum dma_data_direction direction, |
| struct dma_attrs *attrs) |
| { |
| u64 proto_tce; |
| u64 *tcep, *tces; |
| u64 rpn; |
| |
| proto_tce = TCE_PCI_READ; // Read allowed |
| |
| if (direction != DMA_TO_DEVICE) |
| proto_tce |= TCE_PCI_WRITE; |
| |
| tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset; |
| rpn = __pa(uaddr) >> TCE_SHIFT; |
| |
| while (npages--) |
| *(tcep++) = proto_tce | (rpn++ << TCE_RPN_SHIFT); |
| |
| /* Some implementations won't cache invalid TCEs and thus may not |
| * need that flush. We'll probably turn it_type into a bit mask |
| * of flags if that becomes the case |
| */ |
| if (tbl->it_type & TCE_PCI_SWINV_CREATE) |
| pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1); |
| |
| return 0; |
| } |
| |
| static void pnv_tce_free(struct iommu_table *tbl, long index, long npages) |
| { |
| u64 *tcep, *tces; |
| |
| tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset; |
| |
| while (npages--) |
| *(tcep++) = 0; |
| |
| if (tbl->it_type & TCE_PCI_SWINV_FREE) |
| pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1); |
| } |
| |
| static unsigned long pnv_tce_get(struct iommu_table *tbl, long index) |
| { |
| return ((u64 *)tbl->it_base)[index - tbl->it_offset]; |
| } |
| |
| void pnv_pci_setup_iommu_table(struct iommu_table *tbl, |
| void *tce_mem, u64 tce_size, |
| u64 dma_offset) |
| { |
| tbl->it_blocksize = 16; |
| tbl->it_base = (unsigned long)tce_mem; |
| tbl->it_offset = dma_offset >> IOMMU_PAGE_SHIFT; |
| tbl->it_index = 0; |
| tbl->it_size = tce_size >> 3; |
| tbl->it_busno = 0; |
| tbl->it_type = TCE_PCI; |
| } |
| |
| static struct iommu_table *pnv_pci_setup_bml_iommu(struct pci_controller *hose) |
| { |
| struct iommu_table *tbl; |
| const __be64 *basep, *swinvp; |
| const __be32 *sizep; |
| |
| basep = of_get_property(hose->dn, "linux,tce-base", NULL); |
| sizep = of_get_property(hose->dn, "linux,tce-size", NULL); |
| if (basep == NULL || sizep == NULL) { |
| pr_err("PCI: %s has missing tce entries !\n", |
| hose->dn->full_name); |
| return NULL; |
| } |
| tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node); |
| if (WARN_ON(!tbl)) |
| return NULL; |
| pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)), |
| be32_to_cpup(sizep), 0); |
| iommu_init_table(tbl, hose->node); |
| |
| /* Deal with SW invalidated TCEs when needed (BML way) */ |
| swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info", |
| NULL); |
| if (swinvp) { |
| tbl->it_busno = swinvp[1]; |
| tbl->it_index = (unsigned long)ioremap(swinvp[0], 8); |
| tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE; |
| } |
| return tbl; |
| } |
| |
| static void pnv_pci_dma_fallback_setup(struct pci_controller *hose, |
| struct pci_dev *pdev) |
| { |
| struct device_node *np = pci_bus_to_OF_node(hose->bus); |
| struct pci_dn *pdn; |
| |
| if (np == NULL) |
| return; |
| pdn = PCI_DN(np); |
| if (!pdn->iommu_table) |
| pdn->iommu_table = pnv_pci_setup_bml_iommu(hose); |
| if (!pdn->iommu_table) |
| return; |
| set_iommu_table_base(&pdev->dev, pdn->iommu_table); |
| } |
| |
| static void pnv_pci_dma_dev_setup(struct pci_dev *pdev) |
| { |
| struct pci_controller *hose = pci_bus_to_host(pdev->bus); |
| struct pnv_phb *phb = hose->private_data; |
| |
| /* If we have no phb structure, try to setup a fallback based on |
| * the device-tree (RTAS PCI for example) |
| */ |
| if (phb && phb->dma_dev_setup) |
| phb->dma_dev_setup(phb, pdev); |
| else |
| pnv_pci_dma_fallback_setup(hose, pdev); |
| } |
| |
| void pnv_pci_shutdown(void) |
| { |
| struct pci_controller *hose; |
| |
| list_for_each_entry(hose, &hose_list, list_node) { |
| struct pnv_phb *phb = hose->private_data; |
| |
| if (phb && phb->shutdown) |
| phb->shutdown(phb); |
| } |
| } |
| |
| /* Fixup wrong class code in p7ioc and p8 root complex */ |
| static void pnv_p7ioc_rc_quirk(struct pci_dev *dev) |
| { |
| dev->class = PCI_CLASS_BRIDGE_PCI << 8; |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk); |
| |
| static int pnv_pci_probe_mode(struct pci_bus *bus) |
| { |
| struct pci_controller *hose = pci_bus_to_host(bus); |
| const __be64 *tstamp; |
| u64 now, target; |
| |
| |
| /* We hijack this as a way to ensure we have waited long |
| * enough since the reset was lifted on the PCI bus |
| */ |
| if (bus != hose->bus) |
| return PCI_PROBE_NORMAL; |
| tstamp = of_get_property(hose->dn, "reset-clear-timestamp", NULL); |
| if (!tstamp || !*tstamp) |
| return PCI_PROBE_NORMAL; |
| |
| now = mftb() / tb_ticks_per_usec; |
| target = (be64_to_cpup(tstamp) / tb_ticks_per_usec) |
| + PCI_RESET_DELAY_US; |
| |
| pr_devel("pci %04d: Reset target: 0x%llx now: 0x%llx\n", |
| hose->global_number, target, now); |
| |
| if (now < target) |
| msleep((target - now + 999) / 1000); |
| |
| return PCI_PROBE_NORMAL; |
| } |
| |
| void __init pnv_pci_init(void) |
| { |
| struct device_node *np; |
| |
| pci_add_flags(PCI_CAN_SKIP_ISA_ALIGN); |
| |
| /* OPAL absent, try POPAL first then RTAS detection of PHBs */ |
| if (!firmware_has_feature(FW_FEATURE_OPAL)) { |
| #ifdef CONFIG_PPC_POWERNV_RTAS |
| init_pci_config_tokens(); |
| find_and_init_phbs(); |
| #endif /* CONFIG_PPC_POWERNV_RTAS */ |
| } |
| /* OPAL is here, do our normal stuff */ |
| else { |
| int found_ioda = 0; |
| |
| /* Look for IODA IO-Hubs. We don't support mixing IODA |
| * and p5ioc2 due to the need to change some global |
| * probing flags |
| */ |
| for_each_compatible_node(np, NULL, "ibm,ioda-hub") { |
| pnv_pci_init_ioda_hub(np); |
| found_ioda = 1; |
| } |
| |
| /* Look for p5ioc2 IO-Hubs */ |
| if (!found_ioda) |
| for_each_compatible_node(np, NULL, "ibm,p5ioc2") |
| pnv_pci_init_p5ioc2_hub(np); |
| |
| /* Look for ioda2 built-in PHB3's */ |
| for_each_compatible_node(np, NULL, "ibm,ioda2-phb") |
| pnv_pci_init_ioda2_phb(np); |
| } |
| |
| /* Setup the linkage between OF nodes and PHBs */ |
| pci_devs_phb_init(); |
| |
| /* Configure IOMMU DMA hooks */ |
| ppc_md.pci_dma_dev_setup = pnv_pci_dma_dev_setup; |
| ppc_md.tce_build = pnv_tce_build; |
| ppc_md.tce_free = pnv_tce_free; |
| ppc_md.tce_get = pnv_tce_get; |
| ppc_md.pci_probe_mode = pnv_pci_probe_mode; |
| set_pci_dma_ops(&dma_iommu_ops); |
| |
| /* Configure MSIs */ |
| #ifdef CONFIG_PCI_MSI |
| ppc_md.msi_check_device = pnv_msi_check_device; |
| ppc_md.setup_msi_irqs = pnv_setup_msi_irqs; |
| ppc_md.teardown_msi_irqs = pnv_teardown_msi_irqs; |
| #endif |
| } |