drivers/usb/host/ohci-da8xx.c - kernel/msm-4.19 - Gitiles

 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
  * TI DA8xx (OMAP-L1x) Bus Glue
  *
  * Derived from: ohci-omap.c and ohci-s3c2410.c
  * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
  * kind, whether express or implied.
  */

 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_data/usb-davinci.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 #include <asm/unaligned.h>

 #include "ohci.h"

 #define DRIVER_DESC "DA8XX"
 #define DRV_NAME "ohci"

 static struct hc_driver __read_mostly ohci_da8xx_hc_driver;

 static int (*orig_ohci_hub_control)(struct usb_hcd  *hcd, u16 typeReq,
 			u16 wValue, u16 wIndex, char *buf, u16 wLength);
 static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);

 static struct clk *usb11_clk;
 static struct phy *usb11_phy;

 /* Over-current indicator change bitmask */
 static volatile u16 ocic_mask;

 static int ohci_da8xx_enable(void)
 {
 	int ret;

 	ret = clk_prepare_enable(usb11_clk);
 	if (ret)
 		return ret;

 	ret = phy_init(usb11_phy);
 	if (ret)
 		goto err_phy_init;

 	ret = phy_power_on(usb11_phy);
 	if (ret)
 		goto err_phy_power_on;

 	return 0;

 err_phy_power_on:
 	phy_exit(usb11_phy);
 err_phy_init:
 	clk_disable_unprepare(usb11_clk);

 	return ret;
 }

 static void ohci_da8xx_disable(void)
 {
 	phy_power_off(usb11_phy);
 	phy_exit(usb11_phy);
 	clk_disable_unprepare(usb11_clk);
 }

 /*
  * Handle the port over-current indicator change.
  */
 static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
 				    unsigned port)
 {
 	ocic_mask |= 1 << port;

 	/* Once over-current is detected, the port needs to be powered down */
 	if (hub->get_oci(port) > 0)
 		hub->set_power(port, 0);
 }

 static int ohci_da8xx_reset(struct usb_hcd *hcd)
 {
 	struct device *dev		= hcd->self.controller;
 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 	struct ohci_hcd	*ohci		= hcd_to_ohci(hcd);
 	int result;
 	u32 rh_a;

 	dev_dbg(dev, "starting USB controller\n");

 	result = ohci_da8xx_enable();
 	if (result < 0)
 		return result;

 	/*
 	 * DA8xx only have 1 port connected to the pins but the HC root hub
 	 * register A reports 2 ports, thus we'll have to override it...
 	 */
 	ohci->num_ports = 1;

 	result = ohci_setup(hcd);
 	if (result < 0) {
 		ohci_da8xx_disable();
 		return result;
 	}

 	/*
 	 * Since we're providing a board-specific root hub port power control
 	 * and over-current reporting, we have to override the HC root hub A
 	 * register's default value, so that ohci_hub_control() could return
 	 * the correct hub descriptor...
 	 */
 	rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
 	if (hub->set_power) {
 		rh_a &= ~RH_A_NPS;
 		rh_a |=  RH_A_PSM;
 	}
 	if (hub->get_oci) {
 		rh_a &= ~RH_A_NOCP;
 		rh_a |=  RH_A_OCPM;
 	}
 	rh_a &= ~RH_A_POTPGT;
 	rh_a |= hub->potpgt << 24;
 	ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);

 	return result;
 }

 /*
  * Update the status data from the hub with the over-current indicator change.
  */
 static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf)
 {
 	int length		= orig_ohci_hub_status_data(hcd, buf);

 	/* See if we have OCIC bit set on port 1 */
 	if (ocic_mask & (1 << 1)) {
 		dev_dbg(hcd->self.controller, "over-current indicator change "
 			"on port 1\n");

 		if (!length)
 			length = 1;

 		buf[0] |= 1 << 1;
 	}
 	return length;
 }

 /*
  * Look at the control requests to the root hub and see if we need to override.
  */
 static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				  u16 wIndex, char *buf, u16 wLength)
 {
 	struct device *dev		= hcd->self.controller;
 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 	int temp;

 	switch (typeReq) {
 	case GetPortStatus:
 		/* Check the port number */
 		if (wIndex != 1)
 			break;

 		dev_dbg(dev, "GetPortStatus(%u)\n", wIndex);

 		temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1);

 		/* The port power status (PPS) bit defaults to 1 */
 		if (hub->get_power && hub->get_power(wIndex) == 0)
 			temp &= ~RH_PS_PPS;

 		/* The port over-current indicator (POCI) bit is always 0 */
 		if (hub->get_oci && hub->get_oci(wIndex) > 0)
 			temp |=  RH_PS_POCI;

 		/* The over-current indicator change (OCIC) bit is 0 too */
 		if (ocic_mask & (1 << wIndex))
 			temp |=  RH_PS_OCIC;

 		put_unaligned(cpu_to_le32(temp), (__le32 *)buf);
 		return 0;
 	case SetPortFeature:
 		temp = 1;
 		goto check_port;
 	case ClearPortFeature:
 		temp = 0;

 check_port:
 		/* Check the port number */
 		if (wIndex != 1)
 			break;

 		switch (wValue) {
 		case USB_PORT_FEAT_POWER:
 			dev_dbg(dev, "%sPortFeature(%u): %s\n",
 				temp ? "Set" : "Clear", wIndex, "POWER");

 			if (!hub->set_power)
 				return -EPIPE;

 			return hub->set_power(wIndex, temp) ? -EPIPE : 0;
 		case USB_PORT_FEAT_C_OVER_CURRENT:
 			dev_dbg(dev, "%sPortFeature(%u): %s\n",
 				temp ? "Set" : "Clear", wIndex,
 				"C_OVER_CURRENT");

 			if (temp)
 				ocic_mask |= 1 << wIndex;
 			else
 				ocic_mask &= ~(1 << wIndex);
 			return 0;
 		}
 	}

 	return orig_ohci_hub_control(hcd, typeReq, wValue,
 			wIndex, buf, wLength);
 }

 /*-------------------------------------------------------------------------*/

 static int ohci_da8xx_probe(struct platform_device *pdev)
 {
 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(&pdev->dev);
 	struct usb_hcd	*hcd;
 	struct resource *mem;
 	int error, irq;

 	if (hub == NULL)
 		return -ENODEV;

 	usb11_clk = devm_clk_get(&pdev->dev, "usb11");
 	if (IS_ERR(usb11_clk)) {
 		if (PTR_ERR(usb11_clk) != -EPROBE_DEFER)
 			dev_err(&pdev->dev, "Failed to get clock.\n");
 		return PTR_ERR(usb11_clk);
 	}

 	usb11_phy = devm_phy_get(&pdev->dev, "usb-phy");
 	if (IS_ERR(usb11_phy)) {
 		if (PTR_ERR(usb11_phy) != -EPROBE_DEFER)
 			dev_err(&pdev->dev, "Failed to get phy.\n");
 		return PTR_ERR(usb11_phy);
 	}

 	hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev,
 				dev_name(&pdev->dev));
 	if (!hcd)
 		return -ENOMEM;

 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
 	if (IS_ERR(hcd->regs)) {
 		error = PTR_ERR(hcd->regs);
 		goto err;
 	}
 	hcd->rsrc_start = mem->start;
 	hcd->rsrc_len = resource_size(mem);

 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		error = -ENODEV;
 		goto err;
 	}

 	error = usb_add_hcd(hcd, irq, 0);
 	if (error)
 		goto err;

 	device_wakeup_enable(hcd->self.controller);

 	if (hub->ocic_notify) {
 		error = hub->ocic_notify(ohci_da8xx_ocic_handler);
 		if (!error)
 			return 0;
 	}

 	usb_remove_hcd(hcd);
 err:
 	usb_put_hcd(hcd);
 	return error;
 }

 static int ohci_da8xx_remove(struct platform_device *pdev)
 {
 	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(&pdev->dev);

 	hub->ocic_notify(NULL);
 	usb_remove_hcd(hcd);
 	usb_put_hcd(hcd);

 	return 0;
 }

 #ifdef CONFIG_PM
 static int ohci_da8xx_suspend(struct platform_device *pdev,
 				pm_message_t message)
 {
 	struct usb_hcd	*hcd	= platform_get_drvdata(pdev);
 	struct ohci_hcd	*ohci	= hcd_to_ohci(hcd);
 	bool		do_wakeup	= device_may_wakeup(&pdev->dev);
 	int		ret;


 	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);
 	ohci->next_statechange = jiffies;

 	ret = ohci_suspend(hcd, do_wakeup);
 	if (ret)
 		return ret;

 	ohci_da8xx_disable();
 	hcd->state = HC_STATE_SUSPENDED;

 	return ret;
 }

 static int ohci_da8xx_resume(struct platform_device *dev)
 {
 	struct usb_hcd	*hcd	= platform_get_drvdata(dev);
 	struct ohci_hcd	*ohci	= hcd_to_ohci(hcd);
 	int ret;

 	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);
 	ohci->next_statechange = jiffies;

 	ret = ohci_da8xx_enable();
 	if (ret)
 		return ret;

 	dev->dev.power.power_state = PMSG_ON;
 	usb_hcd_resume_root_hub(hcd);

 	return 0;
 }
 #endif

 static const struct ohci_driver_overrides da8xx_overrides __initconst = {
 	.reset		= ohci_da8xx_reset,
 };

 /*
  * Driver definition to register with platform structure.
  */
 static struct platform_driver ohci_hcd_da8xx_driver = {
 	.probe		= ohci_da8xx_probe,
 	.remove		= ohci_da8xx_remove,
 	.shutdown 	= usb_hcd_platform_shutdown,
 #ifdef	CONFIG_PM
 	.suspend	= ohci_da8xx_suspend,
 	.resume		= ohci_da8xx_resume,
 #endif
 	.driver		= {
 		.name	= DRV_NAME,
 	},
 };

 static int __init ohci_da8xx_init(void)
 {

 	if (usb_disabled())
 		return -ENODEV;

 	pr_info("%s: " DRIVER_DESC "\n", DRV_NAME);
 	ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides);

 	/*
 	 * The Davinci da8xx HW has some unusual quirks, which require
 	 * da8xx-specific workarounds. We override certain hc_driver
 	 * functions here to achieve that. We explicitly do not enhance
 	 * ohci_driver_overrides to allow this more easily, since this
 	 * is an unusual case, and we don't want to encourage others to
 	 * override these functions by making it too easy.
 	 */

 	orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control;
 	orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data;

 	ohci_da8xx_hc_driver.hub_status_data     = ohci_da8xx_hub_status_data;
 	ohci_da8xx_hc_driver.hub_control         = ohci_da8xx_hub_control;

 	return platform_driver_register(&ohci_hcd_da8xx_driver);
 }
 module_init(ohci_da8xx_init);

 static void __exit ohci_da8xx_exit(void)
 {
 	platform_driver_unregister(&ohci_hcd_da8xx_driver);
 }
 module_exit(ohci_da8xx_exit);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:" DRV_NAME);
	/*
	* OHCI HCD (Host Controller Driver) for USB.
	*
	* TI DA8xx (OMAP-L1x) Bus Glue
	*
	* Derived from: ohci-omap.c and ohci-s3c2410.c
	* Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
	*
	* This file is licensed under the terms of the GNU General Public License
	* version 2. This program is licensed "as is" without any warranty of any
	* kind, whether express or implied.
	*/

	#include <linux/clk.h>
	#include <linux/io.h>
	#include <linux/interrupt.h>
	#include <linux/jiffies.h>
	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/platform_device.h>
	#include <linux/phy/phy.h>
	#include <linux/platform_data/usb-davinci.h>
	#include <linux/usb.h>
	#include <linux/usb/hcd.h>
	#include <asm/unaligned.h>

	#include "ohci.h"

	#define DRIVER_DESC "DA8XX"
	#define DRV_NAME "ohci"

	static struct hc_driver __read_mostly ohci_da8xx_hc_driver;

	static int (orig_ohci_hub_control)(struct usb_hcd hcd, u16 typeReq,
	u16 wValue, u16 wIndex, char *buf, u16 wLength);
	static int (orig_ohci_hub_status_data)(struct usb_hcd hcd, char *buf);

	static struct clk *usb11_clk;
	static struct phy *usb11_phy;

	/* Over-current indicator change bitmask */
	static volatile u16 ocic_mask;

	static int ohci_da8xx_enable(void)
	{
	int ret;

	ret = clk_prepare_enable(usb11_clk);
	if (ret)
	return ret;

	ret = phy_init(usb11_phy);
	if (ret)
	goto err_phy_init;

	ret = phy_power_on(usb11_phy);
	if (ret)
	goto err_phy_power_on;

	return 0;

	err_phy_power_on:
	phy_exit(usb11_phy);
	err_phy_init:
	clk_disable_unprepare(usb11_clk);

	return ret;
	}

	static void ohci_da8xx_disable(void)
	{
	phy_power_off(usb11_phy);
	phy_exit(usb11_phy);
	clk_disable_unprepare(usb11_clk);
	}

	/*
	* Handle the port over-current indicator change.
	*/
	static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
	unsigned port)
	{
	ocic_mask \|= 1 << port;

	/* Once over-current is detected, the port needs to be powered down */
	if (hub->get_oci(port) > 0)
	hub->set_power(port, 0);
	}

	static int ohci_da8xx_reset(struct usb_hcd *hcd)
	{
	struct device *dev = hcd->self.controller;
	struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
	int result;
	u32 rh_a;

	dev_dbg(dev, "starting USB controller\n");

	result = ohci_da8xx_enable();
	if (result < 0)
	return result;

	/*
	* DA8xx only have 1 port connected to the pins but the HC root hub
	* register A reports 2 ports, thus we'll have to override it...
	*/
	ohci->num_ports = 1;

	result = ohci_setup(hcd);
	if (result < 0) {
	ohci_da8xx_disable();
	return result;
	}

	/*
	* Since we're providing a board-specific root hub port power control
	* and over-current reporting, we have to override the HC root hub A
	* register's default value, so that ohci_hub_control() could return
	* the correct hub descriptor...
	*/
	rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
	if (hub->set_power) {
	rh_a &= ~RH_A_NPS;
	rh_a \|= RH_A_PSM;
	}
	if (hub->get_oci) {
	rh_a &= ~RH_A_NOCP;
	rh_a \|= RH_A_OCPM;
	}
	rh_a &= ~RH_A_POTPGT;
	rh_a \|= hub->potpgt << 24;
	ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);

	return result;
	}

	/*
	* Update the status data from the hub with the over-current indicator change.
	*/
	static int ohci_da8xx_hub_status_data(struct usb_hcd hcd, char buf)
	{
	int length = orig_ohci_hub_status_data(hcd, buf);

	/* See if we have OCIC bit set on port 1 */
	if (ocic_mask & (1 << 1)) {
	dev_dbg(hcd->self.controller, "over-current indicator change "
	"on port 1\n");

	if (!length)
	length = 1;

	buf[0] \|= 1 << 1;
	}
	return length;
	}

	/*
	* Look at the control requests to the root hub and see if we need to override.
	*/
	static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
	u16 wIndex, char *buf, u16 wLength)
	{
	struct device *dev = hcd->self.controller;
	struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
	int temp;

	switch (typeReq) {
	case GetPortStatus:
	/* Check the port number */
	if (wIndex != 1)
	break;

	dev_dbg(dev, "GetPortStatus(%u)\n", wIndex);

	temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1);

	/* The port power status (PPS) bit defaults to 1 */
	if (hub->get_power && hub->get_power(wIndex) == 0)
	temp &= ~RH_PS_PPS;

	/* The port over-current indicator (POCI) bit is always 0 */
	if (hub->get_oci && hub->get_oci(wIndex) > 0)
	temp \|= RH_PS_POCI;

	/* The over-current indicator change (OCIC) bit is 0 too */
	if (ocic_mask & (1 << wIndex))
	temp \|= RH_PS_OCIC;

	put_unaligned(cpu_to_le32(temp), (__le32 *)buf);
	return 0;
	case SetPortFeature:
	temp = 1;
	goto check_port;
	case ClearPortFeature:
	temp = 0;

	check_port:
	/* Check the port number */
	if (wIndex != 1)
	break;

	switch (wValue) {
	case USB_PORT_FEAT_POWER:
	dev_dbg(dev, "%sPortFeature(%u): %s\n",
	temp ? "Set" : "Clear", wIndex, "POWER");

	if (!hub->set_power)
	return -EPIPE;

	return hub->set_power(wIndex, temp) ? -EPIPE : 0;
	case USB_PORT_FEAT_C_OVER_CURRENT:
	dev_dbg(dev, "%sPortFeature(%u): %s\n",
	temp ? "Set" : "Clear", wIndex,
	"C_OVER_CURRENT");

	if (temp)
	ocic_mask \|= 1 << wIndex;
	else
	ocic_mask &= ~(1 << wIndex);
	return 0;
	}
	}

	return orig_ohci_hub_control(hcd, typeReq, wValue,
	wIndex, buf, wLength);
	}

	/-------------------------------------------------------------------------/

	static int ohci_da8xx_probe(struct platform_device *pdev)
	{
	struct da8xx_ohci_root_hub *hub = dev_get_platdata(&pdev->dev);
	struct usb_hcd *hcd;
	struct resource *mem;
	int error, irq;

	if (hub == NULL)
	return -ENODEV;

	usb11_clk = devm_clk_get(&pdev->dev, "usb11");
	if (IS_ERR(usb11_clk)) {
	if (PTR_ERR(usb11_clk) != -EPROBE_DEFER)
	dev_err(&pdev->dev, "Failed to get clock.\n");
	return PTR_ERR(usb11_clk);
	}

	usb11_phy = devm_phy_get(&pdev->dev, "usb-phy");
	if (IS_ERR(usb11_phy)) {
	if (PTR_ERR(usb11_phy) != -EPROBE_DEFER)
	dev_err(&pdev->dev, "Failed to get phy.\n");
	return PTR_ERR(usb11_phy);
	}

	hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev,
	dev_name(&pdev->dev));
	if (!hcd)
	return -ENOMEM;

	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
	if (IS_ERR(hcd->regs)) {
	error = PTR_ERR(hcd->regs);
	goto err;
	}
	hcd->rsrc_start = mem->start;
	hcd->rsrc_len = resource_size(mem);

	irq = platform_get_irq(pdev, 0);
	if (irq < 0) {
	error = -ENODEV;
	goto err;
	}

	error = usb_add_hcd(hcd, irq, 0);
	if (error)
	goto err;

	device_wakeup_enable(hcd->self.controller);

	if (hub->ocic_notify) {
	error = hub->ocic_notify(ohci_da8xx_ocic_handler);
	if (!error)
	return 0;
	}

	usb_remove_hcd(hcd);
	err:
	usb_put_hcd(hcd);
	return error;
	}

	static int ohci_da8xx_remove(struct platform_device *pdev)
	{
	struct usb_hcd *hcd = platform_get_drvdata(pdev);
	struct da8xx_ohci_root_hub *hub = dev_get_platdata(&pdev->dev);

	hub->ocic_notify(NULL);
	usb_remove_hcd(hcd);
	usb_put_hcd(hcd);

	return 0;
	}

	#ifdef CONFIG_PM
	static int ohci_da8xx_suspend(struct platform_device *pdev,
	pm_message_t message)
	{
	struct usb_hcd *hcd = platform_get_drvdata(pdev);
	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
	bool do_wakeup = device_may_wakeup(&pdev->dev);
	int ret;


	if (time_before(jiffies, ohci->next_statechange))
	msleep(5);
	ohci->next_statechange = jiffies;

	ret = ohci_suspend(hcd, do_wakeup);
	if (ret)
	return ret;

	ohci_da8xx_disable();
	hcd->state = HC_STATE_SUSPENDED;

	return ret;
	}

	static int ohci_da8xx_resume(struct platform_device *dev)
	{
	struct usb_hcd *hcd = platform_get_drvdata(dev);
	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
	int ret;

	if (time_before(jiffies, ohci->next_statechange))
	msleep(5);
	ohci->next_statechange = jiffies;

	ret = ohci_da8xx_enable();
	if (ret)
	return ret;

	dev->dev.power.power_state = PMSG_ON;
	usb_hcd_resume_root_hub(hcd);

	return 0;
	}
	#endif

	static const struct ohci_driver_overrides da8xx_overrides __initconst = {
	.reset = ohci_da8xx_reset,
	};

	/*
	* Driver definition to register with platform structure.
	*/
	static struct platform_driver ohci_hcd_da8xx_driver = {
	.probe = ohci_da8xx_probe,
	.remove = ohci_da8xx_remove,
	.shutdown = usb_hcd_platform_shutdown,
	#ifdef CONFIG_PM
	.suspend = ohci_da8xx_suspend,
	.resume = ohci_da8xx_resume,
	#endif
	.driver = {
	.name = DRV_NAME,
	},
	};

	static int __init ohci_da8xx_init(void)
	{

	if (usb_disabled())
	return -ENODEV;

	pr_info("%s: " DRIVER_DESC "\n", DRV_NAME);
	ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides);

	/*
	* The Davinci da8xx HW has some unusual quirks, which require
	* da8xx-specific workarounds. We override certain hc_driver
	* functions here to achieve that. We explicitly do not enhance
	* ohci_driver_overrides to allow this more easily, since this
	* is an unusual case, and we don't want to encourage others to
	* override these functions by making it too easy.
	*/

	orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control;
	orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data;

	ohci_da8xx_hc_driver.hub_status_data = ohci_da8xx_hub_status_data;
	ohci_da8xx_hc_driver.hub_control = ohci_da8xx_hub_control;

	return platform_driver_register(&ohci_hcd_da8xx_driver);
	}
	module_init(ohci_da8xx_init);

	static void __exit ohci_da8xx_exit(void)
	{
	platform_driver_unregister(&ohci_hcd_da8xx_driver);
	}
	module_exit(ohci_da8xx_exit);
	MODULE_DESCRIPTION(DRIVER_DESC);
	MODULE_LICENSE("GPL");
	MODULE_ALIAS("platform:" DRV_NAME);