| /* |
| * linux/arch/m32r/platforms/mappi3/setup.c |
| * |
| * Setup routines for Renesas MAPPI-III(M3A-2170) Board |
| * |
| * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, |
| * Hitoshi Yamamoto, Mamoru Sakugawa |
| */ |
| |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/system.h> |
| #include <asm/m32r.h> |
| #include <asm/io.h> |
| |
| #define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) |
| |
| icu_data_t icu_data[NR_IRQS]; |
| |
| static void disable_mappi3_irq(unsigned int irq) |
| { |
| unsigned long port, data; |
| |
| if ((irq == 0) ||(irq >= NR_IRQS)) { |
| printk("bad irq 0x%08x\n", irq); |
| return; |
| } |
| port = irq2port(irq); |
| data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; |
| outl(data, port); |
| } |
| |
| static void enable_mappi3_irq(unsigned int irq) |
| { |
| unsigned long port, data; |
| |
| if ((irq == 0) ||(irq >= NR_IRQS)) { |
| printk("bad irq 0x%08x\n", irq); |
| return; |
| } |
| port = irq2port(irq); |
| data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; |
| outl(data, port); |
| } |
| |
| static void mask_mappi3(struct irq_data *data) |
| { |
| disable_mappi3_irq(data->irq); |
| } |
| |
| static void unmask_mappi3(struct irq_data *data) |
| { |
| enable_mappi3_irq(data->irq); |
| } |
| |
| static void shutdown_mappi3(struct irq_data *data) |
| { |
| unsigned long port; |
| |
| port = irq2port(data->irq); |
| outl(M32R_ICUCR_ILEVEL7, port); |
| } |
| |
| static struct irq_chip mappi3_irq_type = { |
| .name = "MAPPI3-IRQ", |
| .irq_shutdown = shutdown_mappi3, |
| .irq_mask = mask_mappi3, |
| .irq_unmask = unmask_mappi3, |
| }; |
| |
| void __init init_IRQ(void) |
| { |
| #if defined(CONFIG_SMC91X) |
| /* INT0 : LAN controller (SMC91111) */ |
| set_irq_chip_and_handler(M32R_IRQ_INT0, &mappi3_irq_type, |
| handle_level_irq); |
| icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; |
| disable_mappi3_irq(M32R_IRQ_INT0); |
| #endif /* CONFIG_SMC91X */ |
| |
| /* MFT2 : system timer */ |
| set_irq_chip_and_handler(M32R_IRQ_MFT2, &mappi3_irq_type, |
| handle_level_irq); |
| icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; |
| disable_mappi3_irq(M32R_IRQ_MFT2); |
| |
| #ifdef CONFIG_SERIAL_M32R_SIO |
| /* SIO0_R : uart receive data */ |
| set_irq_chip_and_handler(M32R_IRQ_SIO0_R, &mappi3_irq_type, |
| handle_level_irq); |
| icu_data[M32R_IRQ_SIO0_R].icucr = 0; |
| disable_mappi3_irq(M32R_IRQ_SIO0_R); |
| |
| /* SIO0_S : uart send data */ |
| set_irq_chip_and_handler(M32R_IRQ_SIO0_S, &mappi3_irq_type, |
| handle_level_irq); |
| icu_data[M32R_IRQ_SIO0_S].icucr = 0; |
| disable_mappi3_irq(M32R_IRQ_SIO0_S); |
| /* SIO1_R : uart receive data */ |
| set_irq_chip_and_handler(M32R_IRQ_SIO1_R, &mappi3_irq_type, |
| handle_level_irq); |
| icu_data[M32R_IRQ_SIO1_R].icucr = 0; |
| disable_mappi3_irq(M32R_IRQ_SIO1_R); |
| |
| /* SIO1_S : uart send data */ |
| set_irq_chip_and_handler(M32R_IRQ_SIO1_S, &mappi3_irq_type, |
| handle_level_irq); |
| icu_data[M32R_IRQ_SIO1_S].icucr = 0; |
| disable_mappi3_irq(M32R_IRQ_SIO1_S); |
| #endif /* CONFIG_M32R_USE_DBG_CONSOLE */ |
| |
| #if defined(CONFIG_USB) |
| /* INT1 : USB Host controller interrupt */ |
| set_irq_chip_and_handler(M32R_IRQ_INT1, &mappi3_irq_type, |
| handle_level_irq); |
| icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD01; |
| disable_mappi3_irq(M32R_IRQ_INT1); |
| #endif /* CONFIG_USB */ |
| |
| /* CFC IREQ */ |
| set_irq_chip_and_handler(PLD_IRQ_CFIREQ, &mappi3_irq_type, |
| handle_level_irq); |
| icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; |
| disable_mappi3_irq(PLD_IRQ_CFIREQ); |
| |
| #if defined(CONFIG_M32R_CFC) |
| /* ICUCR41: CFC Insert & eject */ |
| set_irq_chip_and_handler(PLD_IRQ_CFC_INSERT, &mappi3_irq_type, |
| handle_level_irq); |
| icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; |
| disable_mappi3_irq(PLD_IRQ_CFC_INSERT); |
| |
| #endif /* CONFIG_M32R_CFC */ |
| |
| /* IDE IREQ */ |
| set_irq_chip_and_handler(PLD_IRQ_IDEIREQ, &mappi3_irq_type, |
| handle_level_irq); |
| icu_data[PLD_IRQ_IDEIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; |
| disable_mappi3_irq(PLD_IRQ_IDEIREQ); |
| |
| } |
| |
| #if defined(CONFIG_SMC91X) |
| |
| #define LAN_IOSTART 0x300 |
| #define LAN_IOEND 0x320 |
| static struct resource smc91x_resources[] = { |
| [0] = { |
| .start = (LAN_IOSTART), |
| .end = (LAN_IOEND), |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = M32R_IRQ_INT0, |
| .end = M32R_IRQ_INT0, |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| |
| static struct platform_device smc91x_device = { |
| .name = "smc91x", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(smc91x_resources), |
| .resource = smc91x_resources, |
| }; |
| |
| #endif |
| |
| #if defined(CONFIG_FB_S1D13XXX) |
| |
| #include <video/s1d13xxxfb.h> |
| #include <asm/s1d13806.h> |
| |
| static struct s1d13xxxfb_pdata s1d13xxxfb_data = { |
| .initregs = s1d13xxxfb_initregs, |
| .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), |
| .platform_init_video = NULL, |
| #ifdef CONFIG_PM |
| .platform_suspend_video = NULL, |
| .platform_resume_video = NULL, |
| #endif |
| }; |
| |
| static struct resource s1d13xxxfb_resources[] = { |
| [0] = { |
| .start = 0x1d600000UL, |
| .end = 0x1d73FFFFUL, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = 0x1d400000UL, |
| .end = 0x1d4001FFUL, |
| .flags = IORESOURCE_MEM, |
| } |
| }; |
| |
| static struct platform_device s1d13xxxfb_device = { |
| .name = S1D_DEVICENAME, |
| .id = 0, |
| .dev = { |
| .platform_data = &s1d13xxxfb_data, |
| }, |
| .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), |
| .resource = s1d13xxxfb_resources, |
| }; |
| #endif |
| |
| static int __init platform_init(void) |
| { |
| #if defined(CONFIG_SMC91X) |
| platform_device_register(&smc91x_device); |
| #endif |
| #if defined(CONFIG_FB_S1D13XXX) |
| platform_device_register(&s1d13xxxfb_device); |
| #endif |
| return 0; |
| } |
| arch_initcall(platform_init); |