[SCSI] lpfc 8.3.31: Correct handling of SLI4-port XRI resource-provisioning profile change
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 330dd71..620fa45 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -460,6 +460,7 @@
int lpfc_issue_reg_vfi(struct lpfc_vport *);
int lpfc_issue_unreg_vfi(struct lpfc_vport *);
int lpfc_selective_reset(struct lpfc_hba *);
-int lpfc_sli4_read_config(struct lpfc_hba *phba);
-int lpfc_scsi_buf_update(struct lpfc_hba *phba);
-void lpfc_sli4_node_prep(struct lpfc_hba *phba);
+int lpfc_sli4_read_config(struct lpfc_hba *);
+void lpfc_sli4_node_prep(struct lpfc_hba *);
+int lpfc_sli4_xri_sgl_update(struct lpfc_hba *);
+void lpfc_free_sgl_list(struct lpfc_hba *, struct list_head *);
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 91f0976..24344c1 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -228,19 +228,15 @@
#define lpfc_idx_rsrc_rdy_MASK 0x00000001
#define lpfc_idx_rsrc_rdy_WORD word0
#define LPFC_IDX_RSRC_RDY 1
-#define lpfc_xri_rsrc_rdy_SHIFT 1
-#define lpfc_xri_rsrc_rdy_MASK 0x00000001
-#define lpfc_xri_rsrc_rdy_WORD word0
-#define LPFC_XRI_RSRC_RDY 1
-#define lpfc_rpi_rsrc_rdy_SHIFT 2
+#define lpfc_rpi_rsrc_rdy_SHIFT 1
#define lpfc_rpi_rsrc_rdy_MASK 0x00000001
#define lpfc_rpi_rsrc_rdy_WORD word0
#define LPFC_RPI_RSRC_RDY 1
-#define lpfc_vpi_rsrc_rdy_SHIFT 3
+#define lpfc_vpi_rsrc_rdy_SHIFT 2
#define lpfc_vpi_rsrc_rdy_MASK 0x00000001
#define lpfc_vpi_rsrc_rdy_WORD word0
#define LPFC_VPI_RSRC_RDY 1
-#define lpfc_vfi_rsrc_rdy_SHIFT 4
+#define lpfc_vfi_rsrc_rdy_SHIFT 3
#define lpfc_vfi_rsrc_rdy_MASK 0x00000001
#define lpfc_vfi_rsrc_rdy_WORD word0
#define LPFC_VFI_RSRC_RDY 1
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 5538cd0..411ed48 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -64,8 +64,8 @@
static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
static int lpfc_setup_endian_order(struct lpfc_hba *);
static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
-static void lpfc_free_sgl_list(struct lpfc_hba *);
-static int lpfc_init_sgl_list(struct lpfc_hba *);
+static void lpfc_free_els_sgl_list(struct lpfc_hba *);
+static void lpfc_init_sgl_list(struct lpfc_hba *);
static int lpfc_init_active_sgl_array(struct lpfc_hba *);
static void lpfc_free_active_sgl(struct lpfc_hba *);
static int lpfc_hba_down_post_s3(struct lpfc_hba *phba);
@@ -2767,47 +2767,14 @@
}
/**
- * lpfc_scsi_buf_update - Update the scsi_buffers that are already allocated.
- * @phba: pointer to lpfc hba data structure.
- *
- * This routine goes through all the scsi buffers in the system and updates the
- * Physical XRIs assigned to the SCSI buffer because these may change after any
- * firmware reset
- *
- * Return codes
- * 0 - successful (for now, it always returns 0)
- **/
-int
-lpfc_scsi_buf_update(struct lpfc_hba *phba)
-{
- struct lpfc_scsi_buf *sb, *sb_next;
-
- spin_lock_irq(&phba->hbalock);
- spin_lock(&phba->scsi_buf_list_lock);
- list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) {
- sb->cur_iocbq.sli4_xritag =
- phba->sli4_hba.xri_ids[sb->cur_iocbq.sli4_lxritag];
- set_bit(sb->cur_iocbq.sli4_lxritag, phba->sli4_hba.xri_bmask);
- phba->sli4_hba.max_cfg_param.xri_used++;
- phba->sli4_hba.xri_count++;
- }
- spin_unlock(&phba->scsi_buf_list_lock);
- spin_unlock_irq(&phba->hbalock);
- return 0;
-}
-
-/**
* lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
* @phba: pointer to lpfc hba data structure.
*
* This routine is to free all the SCSI buffers and IOCBs from the driver
* list back to kernel. It is called from lpfc_pci_remove_one to free
* the internal resources before the device is removed from the system.
- *
- * Return codes
- * 0 - successful (for now, it always returns 0)
**/
-static int
+static void
lpfc_scsi_free(struct lpfc_hba *phba)
{
struct lpfc_scsi_buf *sb, *sb_next;
@@ -2833,7 +2800,178 @@
}
spin_unlock_irq(&phba->hbalock);
+}
+
+/**
+ * lpfc_sli4_xri_sgl_update - update xri-sgl sizing and mapping
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine first calculates the sizes of the current els and allocated
+ * scsi sgl lists, and then goes through all sgls to updates the physical
+ * XRIs assigned due to port function reset. During port initialization, the
+ * current els and allocated scsi sgl lists are 0s.
+ *
+ * Return codes
+ * 0 - successful (for now, it always returns 0)
+ **/
+int
+lpfc_sli4_xri_sgl_update(struct lpfc_hba *phba)
+{
+ struct lpfc_sglq *sglq_entry = NULL, *sglq_entry_next = NULL;
+ struct lpfc_scsi_buf *psb = NULL, *psb_next = NULL;
+ uint16_t i, lxri, xri_cnt, els_xri_cnt, scsi_xri_cnt;
+ LIST_HEAD(els_sgl_list);
+ LIST_HEAD(scsi_sgl_list);
+ int rc;
+
+ /*
+ * update on pci function's els xri-sgl list
+ */
+ els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+ if (els_xri_cnt > phba->sli4_hba.els_xri_cnt) {
+ /* els xri-sgl expanded */
+ xri_cnt = els_xri_cnt - phba->sli4_hba.els_xri_cnt;
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3157 ELS xri-sgl count increased from "
+ "%d to %d\n", phba->sli4_hba.els_xri_cnt,
+ els_xri_cnt);
+ /* allocate the additional els sgls */
+ for (i = 0; i < xri_cnt; i++) {
+ sglq_entry = kzalloc(sizeof(struct lpfc_sglq),
+ GFP_KERNEL);
+ if (sglq_entry == NULL) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2562 Failure to allocate an "
+ "ELS sgl entry:%d\n", i);
+ rc = -ENOMEM;
+ goto out_free_mem;
+ }
+ sglq_entry->buff_type = GEN_BUFF_TYPE;
+ sglq_entry->virt = lpfc_mbuf_alloc(phba, 0,
+ &sglq_entry->phys);
+ if (sglq_entry->virt == NULL) {
+ kfree(sglq_entry);
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2563 Failure to allocate an "
+ "ELS mbuf:%d\n", i);
+ rc = -ENOMEM;
+ goto out_free_mem;
+ }
+ sglq_entry->sgl = sglq_entry->virt;
+ memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
+ sglq_entry->state = SGL_FREED;
+ list_add_tail(&sglq_entry->list, &els_sgl_list);
+ }
+ spin_lock(&phba->hbalock);
+ list_splice_init(&els_sgl_list, &phba->sli4_hba.lpfc_sgl_list);
+ spin_unlock(&phba->hbalock);
+ } else if (els_xri_cnt < phba->sli4_hba.els_xri_cnt) {
+ /* els xri-sgl shrinked */
+ xri_cnt = phba->sli4_hba.els_xri_cnt - els_xri_cnt;
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3158 ELS xri-sgl count decreased from "
+ "%d to %d\n", phba->sli4_hba.els_xri_cnt,
+ els_xri_cnt);
+ spin_lock_irq(&phba->hbalock);
+ list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &els_sgl_list);
+ spin_unlock_irq(&phba->hbalock);
+ /* release extra els sgls from list */
+ for (i = 0; i < xri_cnt; i++) {
+ list_remove_head(&els_sgl_list,
+ sglq_entry, struct lpfc_sglq, list);
+ if (sglq_entry) {
+ lpfc_mbuf_free(phba, sglq_entry->virt,
+ sglq_entry->phys);
+ kfree(sglq_entry);
+ }
+ }
+ spin_lock_irq(&phba->hbalock);
+ list_splice_init(&els_sgl_list, &phba->sli4_hba.lpfc_sgl_list);
+ spin_unlock_irq(&phba->hbalock);
+ } else
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3163 ELS xri-sgl count unchanged: %d\n",
+ els_xri_cnt);
+ phba->sli4_hba.els_xri_cnt = els_xri_cnt;
+
+ /* update xris to els sgls on the list */
+ sglq_entry = NULL;
+ sglq_entry_next = NULL;
+ list_for_each_entry_safe(sglq_entry, sglq_entry_next,
+ &phba->sli4_hba.lpfc_sgl_list, list) {
+ lxri = lpfc_sli4_next_xritag(phba);
+ if (lxri == NO_XRI) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2400 Failed to allocate xri for "
+ "ELS sgl\n");
+ rc = -ENOMEM;
+ goto out_free_mem;
+ }
+ sglq_entry->sli4_lxritag = lxri;
+ sglq_entry->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
+ }
+
+ /*
+ * update on pci function's allocated scsi xri-sgl list
+ */
+ phba->total_scsi_bufs = 0;
+
+ /* maximum number of xris available for scsi buffers */
+ phba->sli4_hba.scsi_xri_max = phba->sli4_hba.max_cfg_param.max_xri -
+ els_xri_cnt;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "2401 Current allocated SCSI xri-sgl count:%d, "
+ "maximum SCSI xri count:%d\n",
+ phba->sli4_hba.scsi_xri_cnt,
+ phba->sli4_hba.scsi_xri_max);
+
+ spin_lock_irq(&phba->scsi_buf_list_lock);
+ list_splice_init(&phba->lpfc_scsi_buf_list, &scsi_sgl_list);
+ spin_unlock_irq(&phba->scsi_buf_list_lock);
+
+ if (phba->sli4_hba.scsi_xri_cnt > phba->sli4_hba.scsi_xri_max) {
+ /* max scsi xri shrinked below the allocated scsi buffers */
+ scsi_xri_cnt = phba->sli4_hba.scsi_xri_cnt -
+ phba->sli4_hba.scsi_xri_max;
+ /* release the extra allocated scsi buffers */
+ for (i = 0; i < scsi_xri_cnt; i++) {
+ list_remove_head(&scsi_sgl_list, psb,
+ struct lpfc_scsi_buf, list);
+ pci_pool_free(phba->lpfc_scsi_dma_buf_pool, psb->data,
+ psb->dma_handle);
+ kfree(psb);
+ }
+ spin_lock_irq(&phba->scsi_buf_list_lock);
+ phba->sli4_hba.scsi_xri_cnt -= scsi_xri_cnt;
+ spin_unlock_irq(&phba->scsi_buf_list_lock);
+ }
+
+ /* update xris associated to remaining allocated scsi buffers */
+ psb = NULL;
+ psb_next = NULL;
+ list_for_each_entry_safe(psb, psb_next, &scsi_sgl_list, list) {
+ lxri = lpfc_sli4_next_xritag(phba);
+ if (lxri == NO_XRI) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2560 Failed to allocate xri for "
+ "scsi buffer\n");
+ rc = -ENOMEM;
+ goto out_free_mem;
+ }
+ psb->cur_iocbq.sli4_lxritag = lxri;
+ psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
+ }
+ spin_lock(&phba->scsi_buf_list_lock);
+ list_splice_init(&scsi_sgl_list, &phba->lpfc_scsi_buf_list);
+ spin_unlock(&phba->scsi_buf_list_lock);
+
return 0;
+
+out_free_mem:
+ lpfc_free_els_sgl_list(phba);
+ lpfc_scsi_free(phba);
+ return rc;
}
/**
@@ -4636,18 +4774,15 @@
if (rc)
goto out_free_bsmbx;
- /* Initialize and populate the iocb list per host */
- rc = lpfc_init_sgl_list(phba);
- if (rc) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "1400 Failed to initialize sgl list.\n");
- goto out_destroy_cq_event_pool;
- }
+ /* Initialize sgl lists per host */
+ lpfc_init_sgl_list(phba);
+
+ /* Allocate and initialize active sgl array */
rc = lpfc_init_active_sgl_array(phba);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1430 Failed to initialize sgl list.\n");
- goto out_free_sgl_list;
+ goto out_destroy_cq_event_pool;
}
rc = lpfc_sli4_init_rpi_hdrs(phba);
if (rc) {
@@ -4722,8 +4857,6 @@
lpfc_sli4_remove_rpi_hdrs(phba);
out_free_active_sgl:
lpfc_free_active_sgl(phba);
-out_free_sgl_list:
- lpfc_free_sgl_list(phba);
out_destroy_cq_event_pool:
lpfc_sli4_cq_event_pool_destroy(phba);
out_free_bsmbx:
@@ -4760,10 +4893,7 @@
/* Free the ELS sgl list */
lpfc_free_active_sgl(phba);
- lpfc_free_sgl_list(phba);
-
- /* Free the SCSI sgl management array */
- kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+ lpfc_free_els_sgl_list(phba);
/* Free the completion queue EQ event pool */
lpfc_sli4_cq_event_release_all(phba);
@@ -4990,29 +5120,42 @@
}
/**
- * lpfc_free_sgl_list - Free sgl list.
+ * lpfc_free_sgl_list - Free a given sgl list.
* @phba: pointer to lpfc hba data structure.
+ * @sglq_list: pointer to the head of sgl list.
*
- * This routine is invoked to free the driver's sgl list and memory.
+ * This routine is invoked to free a give sgl list and memory.
**/
-static void
-lpfc_free_sgl_list(struct lpfc_hba *phba)
+void
+lpfc_free_sgl_list(struct lpfc_hba *phba, struct list_head *sglq_list)
{
struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+
+ list_for_each_entry_safe(sglq_entry, sglq_next, sglq_list, list) {
+ list_del(&sglq_entry->list);
+ lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
+ kfree(sglq_entry);
+ }
+}
+
+/**
+ * lpfc_free_els_sgl_list - Free els sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's els sgl list and memory.
+ **/
+static void
+lpfc_free_els_sgl_list(struct lpfc_hba *phba)
+{
LIST_HEAD(sglq_list);
+ /* Retrieve all els sgls from driver list */
spin_lock_irq(&phba->hbalock);
list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &sglq_list);
spin_unlock_irq(&phba->hbalock);
- list_for_each_entry_safe(sglq_entry, sglq_next,
- &sglq_list, list) {
- list_del(&sglq_entry->list);
- lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
- kfree(sglq_entry);
- phba->sli4_hba.total_sglq_bufs--;
- }
- kfree(phba->sli4_hba.lpfc_els_sgl_array);
+ /* Now free the sgl list */
+ lpfc_free_sgl_list(phba, &sglq_list);
}
/**
@@ -5057,99 +5200,19 @@
* This routine is invoked to allocate and initizlize the driver's sgl
* list and set up the sgl xritag tag array accordingly.
*
- * Return codes
- * 0 - successful
- * other values - error
**/
-static int
+static void
lpfc_init_sgl_list(struct lpfc_hba *phba)
{
- struct lpfc_sglq *sglq_entry = NULL;
- int i;
- int els_xri_cnt;
-
- els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
- lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "2400 ELS XRI count %d.\n",
- els_xri_cnt);
/* Initialize and populate the sglq list per host/VF. */
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list);
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_els_sgl_list);
- /* Sanity check on XRI management */
- if (phba->sli4_hba.max_cfg_param.max_xri <= els_xri_cnt) {
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "2562 No room left for SCSI XRI allocation: "
- "max_xri=%d, els_xri=%d\n",
- phba->sli4_hba.max_cfg_param.max_xri,
- els_xri_cnt);
- return -ENOMEM;
- }
+ /* els xri-sgl book keeping */
+ phba->sli4_hba.els_xri_cnt = 0;
- /* Allocate memory for the ELS XRI management array */
- phba->sli4_hba.lpfc_els_sgl_array =
- kzalloc((sizeof(struct lpfc_sglq *) * els_xri_cnt),
- GFP_KERNEL);
-
- if (!phba->sli4_hba.lpfc_els_sgl_array) {
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "2401 Failed to allocate memory for ELS "
- "XRI management array of size %d.\n",
- els_xri_cnt);
- return -ENOMEM;
- }
-
- /* Keep the SCSI XRI into the XRI management array */
- phba->sli4_hba.scsi_xri_max =
- phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
+ /* scsi xri-buffer book keeping */
phba->sli4_hba.scsi_xri_cnt = 0;
- phba->sli4_hba.lpfc_scsi_psb_array =
- kzalloc((sizeof(struct lpfc_scsi_buf *) *
- phba->sli4_hba.scsi_xri_max), GFP_KERNEL);
-
- if (!phba->sli4_hba.lpfc_scsi_psb_array) {
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "2563 Failed to allocate memory for SCSI "
- "XRI management array of size %d.\n",
- phba->sli4_hba.scsi_xri_max);
- kfree(phba->sli4_hba.lpfc_els_sgl_array);
- return -ENOMEM;
- }
-
- for (i = 0; i < els_xri_cnt; i++) {
- sglq_entry = kzalloc(sizeof(struct lpfc_sglq), GFP_KERNEL);
- if (sglq_entry == NULL) {
- printk(KERN_ERR "%s: only allocated %d sgls of "
- "expected %d count. Unloading driver.\n",
- __func__, i, els_xri_cnt);
- goto out_free_mem;
- }
-
- sglq_entry->buff_type = GEN_BUFF_TYPE;
- sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys);
- if (sglq_entry->virt == NULL) {
- kfree(sglq_entry);
- printk(KERN_ERR "%s: failed to allocate mbuf.\n"
- "Unloading driver.\n", __func__);
- goto out_free_mem;
- }
- sglq_entry->sgl = sglq_entry->virt;
- memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
-
- /* The list order is used by later block SGL registraton */
- spin_lock_irq(&phba->hbalock);
- sglq_entry->state = SGL_FREED;
- list_add_tail(&sglq_entry->list, &phba->sli4_hba.lpfc_sgl_list);
- phba->sli4_hba.lpfc_els_sgl_array[i] = sglq_entry;
- phba->sli4_hba.total_sglq_bufs++;
- spin_unlock_irq(&phba->hbalock);
- }
- return 0;
-
-out_free_mem:
- kfree(phba->sli4_hba.lpfc_scsi_psb_array);
- lpfc_free_sgl_list(phba);
- return -ENOMEM;
}
/**
@@ -7320,9 +7383,11 @@
phba->sli4_hba.u.if_type2.ERR2regaddr);
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2890 Port error detected during port "
- "reset(%d): port status reg 0x%x, "
+ "reset(%d): wait_tmo:%d ms, "
+ "port status reg 0x%x, "
"error 1=0x%x, error 2=0x%x\n",
- num_resets, reg_data.word0,
+ num_resets, rdy_chk*10,
+ reg_data.word0,
phba->work_status[0],
phba->work_status[1]);
rc = -ENODEV;
@@ -9118,8 +9183,12 @@
return 50;
else if (max_xri <= 1024)
return 100;
- else
+ else if (max_xri <= 1536)
return 150;
+ else if (max_xri <= 2048)
+ return 200;
+ else
+ return 250;
} else
return 0;
}
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 88f3a83..bf0048a 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -718,11 +718,137 @@
}
/**
- * lpfc_sli4_repost_scsi_sgl_list - Repsot the Scsi buffers sgl pages as block
+ * lpfc_sli4_post_scsi_sgl_list - Psot blocks of scsi buffer sgls from a list
+ * @phba: pointer to lpfc hba data structure.
+ * @post_sblist: pointer to the scsi buffer list.
+ *
+ * This routine walks a list of scsi buffers that was passed in. It attempts
+ * to construct blocks of scsi buffer sgls which contains contiguous xris and
+ * uses the non-embedded SGL block post mailbox commands to post to the port.
+ * For single SCSI buffer sgl with non-contiguous xri, if any, it shall use
+ * embedded SGL post mailbox command for posting. The @post_sblist passed in
+ * must be local list, thus no lock is needed when manipulate the list.
+ *
+ * Returns: 0 = failure, non-zero number of successfully posted buffers.
+ **/
+int
+lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba,
+ struct list_head *post_sblist, int sb_count)
+{
+ struct lpfc_scsi_buf *psb, *psb_next;
+ int status;
+ int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
+ dma_addr_t pdma_phys_bpl1;
+ int last_xritag = NO_XRI;
+ LIST_HEAD(prep_sblist);
+ LIST_HEAD(blck_sblist);
+ LIST_HEAD(scsi_sblist);
+
+ /* sanity check */
+ if (sb_count <= 0)
+ return -EINVAL;
+
+ list_for_each_entry_safe(psb, psb_next, post_sblist, list) {
+ list_del_init(&psb->list);
+ block_cnt++;
+ if ((last_xritag != NO_XRI) &&
+ (psb->cur_iocbq.sli4_xritag != last_xritag + 1)) {
+ /* a hole in xri block, form a sgl posting block */
+ list_splice_init(&prep_sblist, &blck_sblist);
+ post_cnt = block_cnt - 1;
+ /* prepare list for next posting block */
+ list_add_tail(&psb->list, &prep_sblist);
+ block_cnt = 1;
+ } else {
+ /* prepare list for next posting block */
+ list_add_tail(&psb->list, &prep_sblist);
+ /* enough sgls for non-embed sgl mbox command */
+ if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+ list_splice_init(&prep_sblist, &blck_sblist);
+ post_cnt = block_cnt;
+ block_cnt = 0;
+ }
+ }
+ num_posting++;
+ last_xritag = psb->cur_iocbq.sli4_xritag;
+
+ /* end of repost sgl list condition for SCSI buffers */
+ if (num_posting == sb_count) {
+ if (post_cnt == 0) {
+ /* last sgl posting block */
+ list_splice_init(&prep_sblist, &blck_sblist);
+ post_cnt = block_cnt;
+ } else if (block_cnt == 1) {
+ /* last single sgl with non-contiguous xri */
+ if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+ pdma_phys_bpl1 = psb->dma_phys_bpl +
+ SGL_PAGE_SIZE;
+ else
+ pdma_phys_bpl1 = 0;
+ status = lpfc_sli4_post_sgl(phba,
+ psb->dma_phys_bpl,
+ pdma_phys_bpl1,
+ psb->cur_iocbq.sli4_xritag);
+ if (status) {
+ /* failure, put on abort scsi list */
+ psb->exch_busy = 1;
+ } else {
+ /* success, put on SCSI buffer list */
+ psb->exch_busy = 0;
+ psb->status = IOSTAT_SUCCESS;
+ num_posted++;
+ }
+ /* success, put on SCSI buffer sgl list */
+ list_add_tail(&psb->list, &scsi_sblist);
+ }
+ }
+
+ /* continue until a nembed page worth of sgls */
+ if (post_cnt == 0)
+ continue;
+
+ /* post block of SCSI buffer list sgls */
+ status = lpfc_sli4_post_scsi_sgl_block(phba, &blck_sblist,
+ post_cnt);
+
+ /* don't reset xirtag due to hole in xri block */
+ if (block_cnt == 0)
+ last_xritag = NO_XRI;
+
+ /* reset SCSI buffer post count for next round of posting */
+ post_cnt = 0;
+
+ /* put posted SCSI buffer-sgl posted on SCSI buffer sgl list */
+ while (!list_empty(&blck_sblist)) {
+ list_remove_head(&blck_sblist, psb,
+ struct lpfc_scsi_buf, list);
+ if (status) {
+ /* failure, put on abort scsi list */
+ psb->exch_busy = 1;
+ } else {
+ /* success, put on SCSI buffer list */
+ psb->exch_busy = 0;
+ psb->status = IOSTAT_SUCCESS;
+ num_posted++;
+ }
+ list_add_tail(&psb->list, &scsi_sblist);
+ }
+ }
+ /* Push SCSI buffers with sgl posted to the availble list */
+ while (!list_empty(&scsi_sblist)) {
+ list_remove_head(&scsi_sblist, psb,
+ struct lpfc_scsi_buf, list);
+ lpfc_release_scsi_buf_s4(phba, psb);
+ }
+ return num_posted;
+}
+
+/**
+ * lpfc_sli4_repost_scsi_sgl_list - Repsot all the allocated scsi buffer sgls
* @phba: pointer to lpfc hba data structure.
*
* This routine walks the list of scsi buffers that have been allocated and
- * repost them to the HBA by using SGL block post. This is needed after a
+ * repost them to the port by using SGL block post. This is needed after a
* pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
* is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
* to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
@@ -732,57 +858,21 @@
int
lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
{
- struct lpfc_scsi_buf *psb;
- int index, status, bcnt = 0, rcnt = 0, rc = 0;
- LIST_HEAD(sblist);
+ LIST_HEAD(post_sblist);
+ int num_posted, rc = 0;
- for (index = 0; index < phba->sli4_hba.scsi_xri_cnt; index++) {
- psb = phba->sli4_hba.lpfc_scsi_psb_array[index];
- if (psb) {
- /* Remove from SCSI buffer list */
- list_del(&psb->list);
- /* Add it to a local SCSI buffer list */
- list_add_tail(&psb->list, &sblist);
- if (++rcnt == LPFC_NEMBED_MBOX_SGL_CNT) {
- bcnt = rcnt;
- rcnt = 0;
- }
- } else
- /* A hole present in the XRI array, need to skip */
- bcnt = rcnt;
+ /* get all SCSI buffers need to repost to a local list */
+ spin_lock(&phba->scsi_buf_list_lock);
+ list_splice_init(&phba->lpfc_scsi_buf_list, &post_sblist);
+ spin_unlock(&phba->scsi_buf_list_lock);
- if (index == phba->sli4_hba.scsi_xri_cnt - 1)
- /* End of XRI array for SCSI buffer, complete */
- bcnt = rcnt;
-
- /* Continue until collect up to a nembed page worth of sgls */
- if (bcnt == 0)
- continue;
- /* Now, post the SCSI buffer list sgls as a block */
- if (!phba->sli4_hba.extents_in_use)
- status = lpfc_sli4_post_scsi_sgl_block(phba,
- &sblist,
- bcnt);
- else
- status = lpfc_sli4_post_scsi_sgl_blk_ext(phba,
- &sblist,
- bcnt);
- /* Reset SCSI buffer count for next round of posting */
- bcnt = 0;
- while (!list_empty(&sblist)) {
- list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
- list);
- if (status) {
- /* Put this back on the abort scsi list */
- psb->exch_busy = 1;
- rc++;
- } else {
- psb->exch_busy = 0;
- psb->status = IOSTAT_SUCCESS;
- }
- /* Put it back into the SCSI buffer list */
- lpfc_release_scsi_buf_s4(phba, psb);
- }
+ /* post the list of scsi buffer sgls to port if available */
+ if (!list_empty(&post_sblist)) {
+ num_posted = lpfc_sli4_post_scsi_sgl_list(phba, &post_sblist,
+ phba->sli4_hba.scsi_xri_cnt);
+ /* failed to post any scsi buffer, return error */
+ if (num_posted == 0)
+ rc = -EIO;
}
return rc;
}
@@ -792,12 +882,13 @@
* @vport: The virtual port for which this call being executed.
* @num_to_allocate: The requested number of buffers to allocate.
*
- * This routine allocates a scsi buffer for device with SLI-4 interface spec,
+ * This routine allocates scsi buffers for device with SLI-4 interface spec,
* the scsi buffer contains all the necessary information needed to initiate
- * a SCSI I/O.
+ * a SCSI I/O. After allocating up to @num_to_allocate SCSI buffers and put
+ * them on a list, it post them to the port by using SGL block post.
*
* Return codes:
- * int - number of scsi buffers that were allocated.
+ * int - number of scsi buffers that were allocated and posted.
* 0 = failure, less than num_to_alloc is a partial failure.
**/
static int
@@ -810,22 +901,21 @@
dma_addr_t pdma_phys_fcp_cmd;
dma_addr_t pdma_phys_fcp_rsp;
dma_addr_t pdma_phys_bpl, pdma_phys_bpl1;
- uint16_t iotag, last_xritag = NO_XRI, lxri = 0;
- int status = 0, index;
- int bcnt;
- int non_sequential_xri = 0;
- LIST_HEAD(sblist);
+ uint16_t iotag, lxri = 0;
+ int bcnt, num_posted;
+ LIST_HEAD(prep_sblist);
+ LIST_HEAD(post_sblist);
+ LIST_HEAD(scsi_sblist);
for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
if (!psb)
break;
-
/*
- * Get memory from the pci pool to map the virt space to pci bus
- * space for an I/O. The DMA buffer includes space for the
- * struct fcp_cmnd, struct fcp_rsp and the number of bde's
- * necessary to support the sg_tablesize.
+ * Get memory from the pci pool to map the virt space to
+ * pci bus space for an I/O. The DMA buffer includes space
+ * for the struct fcp_cmnd, struct fcp_rsp and the number
+ * of bde's necessary to support the sg_tablesize.
*/
psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
GFP_KERNEL, &psb->dma_handle);
@@ -833,8 +923,6 @@
kfree(psb);
break;
}
-
- /* Initialize virtual ptrs to dma_buf region. */
memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
/* Allocate iotag for psb->cur_iocbq. */
@@ -855,16 +943,7 @@
}
psb->cur_iocbq.sli4_lxritag = lxri;
psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
- if (last_xritag != NO_XRI
- && psb->cur_iocbq.sli4_xritag != (last_xritag+1)) {
- non_sequential_xri = 1;
- } else
- list_add_tail(&psb->list, &sblist);
- last_xritag = psb->cur_iocbq.sli4_xritag;
-
- index = phba->sli4_hba.scsi_xri_cnt++;
psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
-
psb->fcp_bpl = psb->data;
psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size)
- (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
@@ -880,9 +959,9 @@
pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
/*
- * The first two bdes are the FCP_CMD and FCP_RSP. The balance
- * are sg list bdes. Initialize the first two and leave the
- * rest for queuecommand.
+ * The first two bdes are the FCP_CMD and FCP_RSP.
+ * The balance are sg list bdes. Initialize the
+ * first two and leave the rest for queuecommand.
*/
sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
@@ -917,62 +996,31 @@
iocb->ulpBdeCount = 1;
iocb->ulpLe = 1;
iocb->ulpClass = CLASS3;
- psb->cur_iocbq.context1 = psb;
+ psb->cur_iocbq.context1 = psb;
if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE;
else
pdma_phys_bpl1 = 0;
psb->dma_phys_bpl = pdma_phys_bpl;
- phba->sli4_hba.lpfc_scsi_psb_array[index] = psb;
- if (non_sequential_xri) {
- status = lpfc_sli4_post_sgl(phba, pdma_phys_bpl,
- pdma_phys_bpl1,
- psb->cur_iocbq.sli4_xritag);
- if (status) {
- /* Put this back on the abort scsi list */
- psb->exch_busy = 1;
- } else {
- psb->exch_busy = 0;
- psb->status = IOSTAT_SUCCESS;
- }
- /* Put it back into the SCSI buffer list */
- lpfc_release_scsi_buf_s4(phba, psb);
- break;
- }
- }
- if (bcnt) {
- if (!phba->sli4_hba.extents_in_use)
- status = lpfc_sli4_post_scsi_sgl_block(phba,
- &sblist,
- bcnt);
- else
- status = lpfc_sli4_post_scsi_sgl_blk_ext(phba,
- &sblist,
- bcnt);
- if (status) {
- lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "3021 SCSI SGL post error %d\n",
- status);
- bcnt = 0;
- }
- /* Reset SCSI buffer count for next round of posting */
- while (!list_empty(&sblist)) {
- list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
- list);
- if (status) {
- /* Put this back on the abort scsi list */
- psb->exch_busy = 1;
- } else {
- psb->exch_busy = 0;
- psb->status = IOSTAT_SUCCESS;
- }
- /* Put it back into the SCSI buffer list */
- lpfc_release_scsi_buf_s4(phba, psb);
- }
+ /* add the scsi buffer to a post list */
+ list_add_tail(&psb->list, &post_sblist);
+ spin_lock_irq(&phba->scsi_buf_list_lock);
+ phba->sli4_hba.scsi_xri_cnt++;
+ spin_unlock_irq(&phba->scsi_buf_list_lock);
}
+ lpfc_printf_log(phba, KERN_INFO, LOG_BG,
+ "3021 Allocate %d out of %d requested new SCSI "
+ "buffers\n", bcnt, num_to_alloc);
- return bcnt + non_sequential_xri;
+ /* post the list of scsi buffer sgls to port if available */
+ if (!list_empty(&post_sblist))
+ num_posted = lpfc_sli4_post_scsi_sgl_list(phba,
+ &post_sblist, bcnt);
+ else
+ num_posted = 0;
+
+ return num_posted;
}
/**
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index dbaf5b9..b887c9c 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -67,6 +67,8 @@
struct hbq_dmabuf *);
static int lpfc_sli4_fp_handle_wcqe(struct lpfc_hba *, struct lpfc_queue *,
struct lpfc_cqe *);
+static int lpfc_sli4_post_els_sgl_list(struct lpfc_hba *, struct list_head *,
+ int);
static IOCB_t *
lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq)
@@ -4967,7 +4969,12 @@
&rsrc_info->u.rsp);
*extnt_size = bf_get(lpfc_mbx_get_rsrc_extent_info_size,
&rsrc_info->u.rsp);
- err_exit:
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3162 Retrieved extents type-%d from port: count:%d, "
+ "size:%d\n", type, *extnt_count, *extnt_size);
+
+err_exit:
mempool_free(mbox, phba->mbox_mem_pool);
return rc;
}
@@ -5051,7 +5058,7 @@
* 0: if successful
**/
static int
-lpfc_sli4_cfg_post_extnts(struct lpfc_hba *phba, uint16_t *extnt_cnt,
+lpfc_sli4_cfg_post_extnts(struct lpfc_hba *phba, uint16_t extnt_cnt,
uint16_t type, bool *emb, LPFC_MBOXQ_t *mbox)
{
int rc = 0;
@@ -5060,7 +5067,7 @@
uint32_t alloc_len, mbox_tmo;
/* Calculate the total requested length of the dma memory */
- req_len = *extnt_cnt * sizeof(uint16_t);
+ req_len = extnt_cnt * sizeof(uint16_t);
/*
* Calculate the size of an embedded mailbox. The uint32_t
@@ -5075,7 +5082,7 @@
*/
*emb = LPFC_SLI4_MBX_EMBED;
if (req_len > emb_len) {
- req_len = *extnt_cnt * sizeof(uint16_t) +
+ req_len = extnt_cnt * sizeof(uint16_t) +
sizeof(union lpfc_sli4_cfg_shdr) +
sizeof(uint32_t);
*emb = LPFC_SLI4_MBX_NEMBED;
@@ -5091,7 +5098,7 @@
"size (x%x)\n", alloc_len, req_len);
return -ENOMEM;
}
- rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, *extnt_cnt, type, *emb);
+ rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, extnt_cnt, type, *emb);
if (unlikely(rc))
return -EIO;
@@ -5149,17 +5156,15 @@
return -ENOMEM;
}
- lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_INIT,
- "2903 Available Resource Extents "
- "for resource type 0x%x: Count: 0x%x, "
- "Size 0x%x\n", type, rsrc_cnt,
- rsrc_size);
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_INIT | LOG_SLI,
+ "2903 Post resource extents type-0x%x: "
+ "count:%d, size %d\n", type, rsrc_cnt, rsrc_size);
mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
return -ENOMEM;
- rc = lpfc_sli4_cfg_post_extnts(phba, &rsrc_cnt, type, &emb, mbox);
+ rc = lpfc_sli4_cfg_post_extnts(phba, rsrc_cnt, type, &emb, mbox);
if (unlikely(rc)) {
rc = -EIO;
goto err_exit;
@@ -5250,6 +5255,7 @@
rc = -ENOMEM;
goto err_exit;
}
+ phba->sli4_hba.max_cfg_param.xri_used = 0;
phba->sli4_hba.xri_ids = kzalloc(rsrc_id_cnt *
sizeof(uint16_t),
GFP_KERNEL);
@@ -5420,7 +5426,6 @@
case LPFC_RSC_TYPE_FCOE_XRI:
kfree(phba->sli4_hba.xri_bmask);
kfree(phba->sli4_hba.xri_ids);
- bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
list_for_each_entry_safe(rsrc_blk, rsrc_blk_next,
&phba->sli4_hba.lpfc_xri_blk_list, list) {
list_del_init(&rsrc_blk->list);
@@ -5612,7 +5617,6 @@
goto free_vpi_ids;
}
phba->sli4_hba.max_cfg_param.xri_used = 0;
- phba->sli4_hba.xri_count = 0;
phba->sli4_hba.xri_ids = kzalloc(count *
sizeof(uint16_t),
GFP_KERNEL);
@@ -5694,7 +5698,6 @@
bf_set(lpfc_vpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
kfree(phba->sli4_hba.xri_bmask);
kfree(phba->sli4_hba.xri_ids);
- bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
kfree(phba->sli4_hba.vfi_bmask);
kfree(phba->sli4_hba.vfi_ids);
bf_set(lpfc_vfi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
@@ -5853,6 +5856,149 @@
}
/**
+ * lpfc_sli4_repost_els_sgl_list - Repsot the els buffers sgl pages as block
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine walks the list of els buffers that have been allocated and
+ * repost them to the port by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. It attempts to construct blocks
+ * of els buffer sgls which contains contiguous xris and uses the non-embedded
+ * SGL block post mailbox commands to post them to the port. For single els
+ * buffer sgl with non-contiguous xri, if any, it shall use embedded SGL post
+ * mailbox command for posting.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+static int
+lpfc_sli4_repost_els_sgl_list(struct lpfc_hba *phba)
+{
+ struct lpfc_sglq *sglq_entry = NULL;
+ struct lpfc_sglq *sglq_entry_next = NULL;
+ struct lpfc_sglq *sglq_entry_first = NULL;
+ int status, post_cnt = 0, num_posted = 0, block_cnt = 0;
+ int last_xritag = NO_XRI;
+ LIST_HEAD(prep_sgl_list);
+ LIST_HEAD(blck_sgl_list);
+ LIST_HEAD(allc_sgl_list);
+ LIST_HEAD(post_sgl_list);
+ LIST_HEAD(free_sgl_list);
+
+ spin_lock(&phba->hbalock);
+ list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &allc_sgl_list);
+ spin_unlock(&phba->hbalock);
+
+ list_for_each_entry_safe(sglq_entry, sglq_entry_next,
+ &allc_sgl_list, list) {
+ list_del_init(&sglq_entry->list);
+ block_cnt++;
+ if ((last_xritag != NO_XRI) &&
+ (sglq_entry->sli4_xritag != last_xritag + 1)) {
+ /* a hole in xri block, form a sgl posting block */
+ list_splice_init(&prep_sgl_list, &blck_sgl_list);
+ post_cnt = block_cnt - 1;
+ /* prepare list for next posting block */
+ list_add_tail(&sglq_entry->list, &prep_sgl_list);
+ block_cnt = 1;
+ } else {
+ /* prepare list for next posting block */
+ list_add_tail(&sglq_entry->list, &prep_sgl_list);
+ /* enough sgls for non-embed sgl mbox command */
+ if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+ list_splice_init(&prep_sgl_list,
+ &blck_sgl_list);
+ post_cnt = block_cnt;
+ block_cnt = 0;
+ }
+ }
+ num_posted++;
+
+ /* keep track of last sgl's xritag */
+ last_xritag = sglq_entry->sli4_xritag;
+
+ /* end of repost sgl list condition for els buffers */
+ if (num_posted == phba->sli4_hba.els_xri_cnt) {
+ if (post_cnt == 0) {
+ list_splice_init(&prep_sgl_list,
+ &blck_sgl_list);
+ post_cnt = block_cnt;
+ } else if (block_cnt == 1) {
+ status = lpfc_sli4_post_sgl(phba,
+ sglq_entry->phys, 0,
+ sglq_entry->sli4_xritag);
+ if (!status) {
+ /* successful, put sgl to posted list */
+ list_add_tail(&sglq_entry->list,
+ &post_sgl_list);
+ } else {
+ /* Failure, put sgl to free list */
+ lpfc_printf_log(phba, KERN_WARNING,
+ LOG_SLI,
+ "3159 Failed to post els "
+ "sgl, xritag:x%x\n",
+ sglq_entry->sli4_xritag);
+ list_add_tail(&sglq_entry->list,
+ &free_sgl_list);
+ spin_lock_irq(&phba->hbalock);
+ phba->sli4_hba.els_xri_cnt--;
+ spin_unlock_irq(&phba->hbalock);
+ }
+ }
+ }
+
+ /* continue until a nembed page worth of sgls */
+ if (post_cnt == 0)
+ continue;
+
+ /* post the els buffer list sgls as a block */
+ status = lpfc_sli4_post_els_sgl_list(phba, &blck_sgl_list,
+ post_cnt);
+
+ if (!status) {
+ /* success, put sgl list to posted sgl list */
+ list_splice_init(&blck_sgl_list, &post_sgl_list);
+ } else {
+ /* Failure, put sgl list to free sgl list */
+ sglq_entry_first = list_first_entry(&blck_sgl_list,
+ struct lpfc_sglq,
+ list);
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "3160 Failed to post els sgl-list, "
+ "xritag:x%x-x%x\n",
+ sglq_entry_first->sli4_xritag,
+ (sglq_entry_first->sli4_xritag +
+ post_cnt - 1));
+ list_splice_init(&blck_sgl_list, &free_sgl_list);
+ spin_lock_irq(&phba->hbalock);
+ phba->sli4_hba.els_xri_cnt -= post_cnt;
+ spin_unlock_irq(&phba->hbalock);
+ }
+
+ /* don't reset xirtag due to hole in xri block */
+ if (block_cnt == 0)
+ last_xritag = NO_XRI;
+
+ /* reset els sgl post count for next round of posting */
+ post_cnt = 0;
+ }
+
+ /* free the els sgls failed to post */
+ lpfc_free_sgl_list(phba, &free_sgl_list);
+
+ /* push els sgls posted to the availble list */
+ if (!list_empty(&post_sgl_list)) {
+ spin_lock(&phba->hbalock);
+ list_splice_init(&post_sgl_list,
+ &phba->sli4_hba.lpfc_sgl_list);
+ spin_unlock(&phba->hbalock);
+ } else {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "3161 Failure to post els sgl to port.\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+/**
* lpfc_sli4_hba_setup - SLI4 device intialization PCI function
* @phba: Pointer to HBA context object.
*
@@ -6063,8 +6209,6 @@
"rc = x%x\n", rc);
goto out_free_mbox;
}
- /* update physical xri mappings in the scsi buffers */
- lpfc_scsi_buf_update(phba);
/* Read the port's service parameters. */
rc = lpfc_read_sparam(phba, mboxq, vport->vpi);
@@ -6105,28 +6249,26 @@
fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
- /* Register SGL pool to the device using non-embedded mailbox command */
- if (!phba->sli4_hba.extents_in_use) {
- rc = lpfc_sli4_post_els_sgl_list(phba);
- if (unlikely(rc)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "0582 Error %d during els sgl post "
- "operation\n", rc);
- rc = -ENODEV;
- goto out_free_mbox;
- }
- } else {
- rc = lpfc_sli4_post_els_sgl_list_ext(phba);
- if (unlikely(rc)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "2560 Error %d during els sgl post "
- "operation\n", rc);
- rc = -ENODEV;
- goto out_free_mbox;
- }
+ /* update host els and scsi xri-sgl sizes and mappings */
+ rc = lpfc_sli4_xri_sgl_update(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "1400 Failed to update xri-sgl size and "
+ "mapping: %d\n", rc);
+ goto out_free_mbox;
}
- /* Register SCSI SGL pool to the device */
+ /* register the els sgl pool to the port */
+ rc = lpfc_sli4_repost_els_sgl_list(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0582 Error %d during els sgl post "
+ "operation\n", rc);
+ rc = -ENODEV;
+ goto out_free_mbox;
+ }
+
+ /* register the allocated scsi sgl pool to the port */
rc = lpfc_sli4_repost_scsi_sgl_list(phba);
if (unlikely(rc)) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
@@ -13080,9 +13222,7 @@
} else {
set_bit(xri, phba->sli4_hba.xri_bmask);
phba->sli4_hba.max_cfg_param.xri_used++;
- phba->sli4_hba.xri_count++;
}
-
spin_unlock_irq(&phba->hbalock);
return xri;
}
@@ -13098,7 +13238,6 @@
__lpfc_sli4_free_xri(struct lpfc_hba *phba, int xri)
{
if (test_and_clear_bit(xri, phba->sli4_hba.xri_bmask)) {
- phba->sli4_hba.xri_count--;
phba->sli4_hba.max_cfg_param.xri_used--;
}
}
@@ -13149,31 +13288,32 @@
/**
* lpfc_sli4_post_els_sgl_list - post a block of ELS sgls to the port.
* @phba: pointer to lpfc hba data structure.
+ * @post_sgl_list: pointer to els sgl entry list.
+ * @count: number of els sgl entries on the list.
*
* This routine is invoked to post a block of driver's sgl pages to the
* HBA using non-embedded mailbox command. No Lock is held. This routine
* is only called when the driver is loading and after all IO has been
* stopped.
**/
-int
-lpfc_sli4_post_els_sgl_list(struct lpfc_hba *phba)
+static int
+lpfc_sli4_post_els_sgl_list(struct lpfc_hba *phba,
+ struct list_head *post_sgl_list,
+ int post_cnt)
{
- struct lpfc_sglq *sglq_entry;
+ struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
struct sgl_page_pairs *sgl_pg_pairs;
void *viraddr;
LPFC_MBOXQ_t *mbox;
uint32_t reqlen, alloclen, pg_pairs;
uint32_t mbox_tmo;
- uint16_t xritag_start = 0, lxri = 0;
- int els_xri_cnt, rc = 0;
+ uint16_t xritag_start = 0;
+ int rc = 0;
uint32_t shdr_status, shdr_add_status;
union lpfc_sli4_cfg_shdr *shdr;
- /* The number of sgls to be posted */
- els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
-
- reqlen = els_xri_cnt * sizeof(struct sgl_page_pairs) +
+ reqlen = phba->sli4_hba.els_xri_cnt * sizeof(struct sgl_page_pairs) +
sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
if (reqlen > SLI4_PAGE_SIZE) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -13203,25 +13343,8 @@
sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
sgl_pg_pairs = &sgl->sgl_pg_pairs;
- for (pg_pairs = 0; pg_pairs < els_xri_cnt; pg_pairs++) {
- sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[pg_pairs];
-
- /*
- * Assign the sglq a physical xri only if the driver has not
- * initialized those resources. A port reset only needs
- * the sglq's posted.
- */
- if (bf_get(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags) !=
- LPFC_XRI_RSRC_RDY) {
- lxri = lpfc_sli4_next_xritag(phba);
- if (lxri == NO_XRI) {
- lpfc_sli4_mbox_cmd_free(phba, mbox);
- return -ENOMEM;
- }
- sglq_entry->sli4_lxritag = lxri;
- sglq_entry->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
- }
-
+ pg_pairs = 0;
+ list_for_each_entry_safe(sglq_entry, sglq_next, post_sgl_list, list) {
/* Set up the sge entry */
sgl_pg_pairs->sgl_pg0_addr_lo =
cpu_to_le32(putPaddrLow(sglq_entry->phys));
@@ -13236,11 +13359,12 @@
if (pg_pairs == 0)
xritag_start = sglq_entry->sli4_xritag;
sgl_pg_pairs++;
+ pg_pairs++;
}
/* Complete initialization and perform endian conversion. */
bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
- bf_set(lpfc_post_sgl_pages_xricnt, sgl, els_xri_cnt);
+ bf_set(lpfc_post_sgl_pages_xricnt, sgl, phba->sli4_hba.els_xri_cnt);
sgl->word0 = cpu_to_le32(sgl->word0);
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
@@ -13260,183 +13384,6 @@
shdr_status, shdr_add_status, rc);
rc = -ENXIO;
}
-
- if (rc == 0)
- bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags,
- LPFC_XRI_RSRC_RDY);
- return rc;
-}
-
-/**
- * lpfc_sli4_post_els_sgl_list_ext - post a block of ELS sgls to the port.
- * @phba: pointer to lpfc hba data structure.
- *
- * This routine is invoked to post a block of driver's sgl pages to the
- * HBA using non-embedded mailbox command. No Lock is held. This routine
- * is only called when the driver is loading and after all IO has been
- * stopped.
- **/
-int
-lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba)
-{
- struct lpfc_sglq *sglq_entry;
- struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
- struct sgl_page_pairs *sgl_pg_pairs;
- void *viraddr;
- LPFC_MBOXQ_t *mbox;
- uint32_t reqlen, alloclen, index;
- uint32_t mbox_tmo;
- uint16_t rsrc_start, rsrc_size, els_xri_cnt, post_els_xri_cnt;
- uint16_t xritag_start = 0, lxri = 0;
- struct lpfc_rsrc_blks *rsrc_blk;
- int cnt, ttl_cnt, rc = 0;
- int loop_cnt;
- uint32_t shdr_status, shdr_add_status;
- union lpfc_sli4_cfg_shdr *shdr;
-
- /* The number of sgls to be posted */
- els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
-
- reqlen = els_xri_cnt * sizeof(struct sgl_page_pairs) +
- sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
- if (reqlen > SLI4_PAGE_SIZE) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "2989 Block sgl registration required DMA "
- "size (%d) great than a page\n", reqlen);
- return -ENOMEM;
- }
-
- cnt = 0;
- ttl_cnt = 0;
- post_els_xri_cnt = els_xri_cnt;
- list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list,
- list) {
- rsrc_start = rsrc_blk->rsrc_start;
- rsrc_size = rsrc_blk->rsrc_size;
-
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "3014 Working ELS Extent start %d, cnt %d\n",
- rsrc_start, rsrc_size);
-
- loop_cnt = min(post_els_xri_cnt, rsrc_size);
- if (loop_cnt < post_els_xri_cnt) {
- post_els_xri_cnt -= loop_cnt;
- ttl_cnt += loop_cnt;
- } else
- ttl_cnt += post_els_xri_cnt;
-
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!mbox)
- return -ENOMEM;
- /*
- * Allocate DMA memory and set up the non-embedded mailbox
- * command.
- */
- alloclen = lpfc_sli4_config(phba, mbox,
- LPFC_MBOX_SUBSYSTEM_FCOE,
- LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
- reqlen, LPFC_SLI4_MBX_NEMBED);
- if (alloclen < reqlen) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2987 Allocated DMA memory size (%d) "
- "is less than the requested DMA memory "
- "size (%d)\n", alloclen, reqlen);
- lpfc_sli4_mbox_cmd_free(phba, mbox);
- return -ENOMEM;
- }
-
- /* Set up the SGL pages in the non-embedded DMA pages */
- viraddr = mbox->sge_array->addr[0];
- sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
- sgl_pg_pairs = &sgl->sgl_pg_pairs;
-
- /*
- * The starting resource may not begin at zero. Control
- * the loop variants via the block resource parameters,
- * but handle the sge pointers with a zero-based index
- * that doesn't get reset per loop pass.
- */
- for (index = rsrc_start;
- index < rsrc_start + loop_cnt;
- index++) {
- sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[cnt];
-
- /*
- * Assign the sglq a physical xri only if the driver
- * has not initialized those resources. A port reset
- * only needs the sglq's posted.
- */
- if (bf_get(lpfc_xri_rsrc_rdy,
- &phba->sli4_hba.sli4_flags) !=
- LPFC_XRI_RSRC_RDY) {
- lxri = lpfc_sli4_next_xritag(phba);
- if (lxri == NO_XRI) {
- lpfc_sli4_mbox_cmd_free(phba, mbox);
- rc = -ENOMEM;
- goto err_exit;
- }
- sglq_entry->sli4_lxritag = lxri;
- sglq_entry->sli4_xritag =
- phba->sli4_hba.xri_ids[lxri];
- }
-
- /* Set up the sge entry */
- sgl_pg_pairs->sgl_pg0_addr_lo =
- cpu_to_le32(putPaddrLow(sglq_entry->phys));
- sgl_pg_pairs->sgl_pg0_addr_hi =
- cpu_to_le32(putPaddrHigh(sglq_entry->phys));
- sgl_pg_pairs->sgl_pg1_addr_lo =
- cpu_to_le32(putPaddrLow(0));
- sgl_pg_pairs->sgl_pg1_addr_hi =
- cpu_to_le32(putPaddrHigh(0));
-
- /* Track the starting physical XRI for the mailbox. */
- if (index == rsrc_start)
- xritag_start = sglq_entry->sli4_xritag;
- sgl_pg_pairs++;
- cnt++;
- }
-
- /* Complete initialization and perform endian conversion. */
- rsrc_blk->rsrc_used += loop_cnt;
- bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
- bf_set(lpfc_post_sgl_pages_xricnt, sgl, loop_cnt);
- sgl->word0 = cpu_to_le32(sgl->word0);
-
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "3015 Post ELS Extent SGL, start %d, "
- "cnt %d, used %d\n",
- xritag_start, loop_cnt, rsrc_blk->rsrc_used);
- if (!phba->sli4_hba.intr_enable)
- rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
- else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
- rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
- }
- shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
- shdr_status = bf_get(lpfc_mbox_hdr_status,
- &shdr->response);
- shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
- &shdr->response);
- if (rc != MBX_TIMEOUT)
- lpfc_sli4_mbox_cmd_free(phba, mbox);
- if (shdr_status || shdr_add_status || rc) {
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "2988 POST_SGL_BLOCK mailbox "
- "command failed status x%x "
- "add_status x%x mbx status x%x\n",
- shdr_status, shdr_add_status, rc);
- rc = -ENXIO;
- goto err_exit;
- }
- if (ttl_cnt >= els_xri_cnt)
- break;
- }
-
- err_exit:
- if (rc == 0)
- bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags,
- LPFC_XRI_RSRC_RDY);
return rc;
}
@@ -13452,8 +13399,9 @@
*
**/
int
-lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist,
- int cnt)
+lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba,
+ struct list_head *sblist,
+ int count)
{
struct lpfc_scsi_buf *psb;
struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
@@ -13469,7 +13417,7 @@
union lpfc_sli4_cfg_shdr *shdr;
/* Calculate the requested length of the dma memory */
- reqlen = cnt * sizeof(struct sgl_page_pairs) +
+ reqlen = count * sizeof(struct sgl_page_pairs) +
sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
if (reqlen > SLI4_PAGE_SIZE) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -13553,169 +13501,6 @@
}
/**
- * lpfc_sli4_post_scsi_sgl_blk_ext - post a block of scsi sgls to the port.
- * @phba: pointer to lpfc hba data structure.
- * @sblist: pointer to scsi buffer list.
- * @count: number of scsi buffers on the list.
- *
- * This routine is invoked to post a block of @count scsi sgl pages from a
- * SCSI buffer list @sblist to the HBA using non-embedded mailbox command.
- * No Lock is held.
- *
- **/
-int
-lpfc_sli4_post_scsi_sgl_blk_ext(struct lpfc_hba *phba, struct list_head *sblist,
- int cnt)
-{
- struct lpfc_scsi_buf *psb = NULL;
- struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
- struct sgl_page_pairs *sgl_pg_pairs;
- void *viraddr;
- LPFC_MBOXQ_t *mbox;
- uint32_t reqlen, alloclen, pg_pairs;
- uint32_t mbox_tmo;
- uint16_t xri_start = 0, scsi_xri_start;
- uint16_t rsrc_range;
- int rc = 0, avail_cnt;
- uint32_t shdr_status, shdr_add_status;
- dma_addr_t pdma_phys_bpl1;
- union lpfc_sli4_cfg_shdr *shdr;
- struct lpfc_rsrc_blks *rsrc_blk;
- uint32_t xri_cnt = 0;
-
- /* Calculate the total requested length of the dma memory */
- reqlen = cnt * sizeof(struct sgl_page_pairs) +
- sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
- if (reqlen > SLI4_PAGE_SIZE) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "2932 Block sgl registration required DMA "
- "size (%d) great than a page\n", reqlen);
- return -ENOMEM;
- }
-
- /*
- * The use of extents requires the driver to post the sgl headers
- * in multiple postings to meet the contiguous resource assignment.
- */
- psb = list_prepare_entry(psb, sblist, list);
- scsi_xri_start = phba->sli4_hba.scsi_xri_start;
- list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list,
- list) {
- rsrc_range = rsrc_blk->rsrc_start + rsrc_blk->rsrc_size;
- if (rsrc_range < scsi_xri_start)
- continue;
- else if (rsrc_blk->rsrc_used >= rsrc_blk->rsrc_size)
- continue;
- else
- avail_cnt = rsrc_blk->rsrc_size - rsrc_blk->rsrc_used;
-
- reqlen = (avail_cnt * sizeof(struct sgl_page_pairs)) +
- sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
- /*
- * Allocate DMA memory and set up the non-embedded mailbox
- * command. The mbox is used to post an SGL page per loop
- * but the DMA memory has a use-once semantic so the mailbox
- * is used and freed per loop pass.
- */
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!mbox) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2933 Failed to allocate mbox cmd "
- "memory\n");
- return -ENOMEM;
- }
- alloclen = lpfc_sli4_config(phba, mbox,
- LPFC_MBOX_SUBSYSTEM_FCOE,
- LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
- reqlen,
- LPFC_SLI4_MBX_NEMBED);
- if (alloclen < reqlen) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2934 Allocated DMA memory size (%d) "
- "is less than the requested DMA memory "
- "size (%d)\n", alloclen, reqlen);
- lpfc_sli4_mbox_cmd_free(phba, mbox);
- return -ENOMEM;
- }
-
- /* Get the first SGE entry from the non-embedded DMA memory */
- viraddr = mbox->sge_array->addr[0];
-
- /* Set up the SGL pages in the non-embedded DMA pages */
- sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
- sgl_pg_pairs = &sgl->sgl_pg_pairs;
-
- /* pg_pairs tracks posted SGEs per loop iteration. */
- pg_pairs = 0;
- list_for_each_entry_continue(psb, sblist, list) {
- /* Set up the sge entry */
- sgl_pg_pairs->sgl_pg0_addr_lo =
- cpu_to_le32(putPaddrLow(psb->dma_phys_bpl));
- sgl_pg_pairs->sgl_pg0_addr_hi =
- cpu_to_le32(putPaddrHigh(psb->dma_phys_bpl));
- if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
- pdma_phys_bpl1 = psb->dma_phys_bpl +
- SGL_PAGE_SIZE;
- else
- pdma_phys_bpl1 = 0;
- sgl_pg_pairs->sgl_pg1_addr_lo =
- cpu_to_le32(putPaddrLow(pdma_phys_bpl1));
- sgl_pg_pairs->sgl_pg1_addr_hi =
- cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
- /* Keep the first xri for this extent. */
- if (pg_pairs == 0)
- xri_start = psb->cur_iocbq.sli4_xritag;
- sgl_pg_pairs++;
- pg_pairs++;
- xri_cnt++;
-
- /*
- * Track two exit conditions - the loop has constructed
- * all of the caller's SGE pairs or all available
- * resource IDs in this extent are consumed.
- */
- if ((xri_cnt == cnt) || (pg_pairs >= avail_cnt))
- break;
- }
- rsrc_blk->rsrc_used += pg_pairs;
- bf_set(lpfc_post_sgl_pages_xri, sgl, xri_start);
- bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
-
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "3016 Post SCSI Extent SGL, start %d, cnt %d "
- "blk use %d\n",
- xri_start, pg_pairs, rsrc_blk->rsrc_used);
- /* Perform endian conversion if necessary */
- sgl->word0 = cpu_to_le32(sgl->word0);
- if (!phba->sli4_hba.intr_enable)
- rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
- else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
- rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
- }
- shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
- shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
- shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
- &shdr->response);
- if (rc != MBX_TIMEOUT)
- lpfc_sli4_mbox_cmd_free(phba, mbox);
- if (shdr_status || shdr_add_status || rc) {
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "2935 POST_SGL_BLOCK mailbox command "
- "failed status x%x add_status x%x "
- "mbx status x%x\n",
- shdr_status, shdr_add_status, rc);
- return -ENXIO;
- }
-
- /* Post only what is requested. */
- if (xri_cnt >= cnt)
- break;
- }
- return rc;
-}
-
-/**
* lpfc_fc_frame_check - Check that this frame is a valid frame to handle
* @phba: pointer to lpfc_hba struct that the frame was received on
* @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index c19d139..f097382 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -493,14 +493,12 @@
uint16_t next_rpi;
uint16_t scsi_xri_max;
uint16_t scsi_xri_cnt;
+ uint16_t els_xri_cnt;
uint16_t scsi_xri_start;
struct list_head lpfc_free_sgl_list;
struct list_head lpfc_sgl_list;
- struct lpfc_sglq **lpfc_els_sgl_array;
struct list_head lpfc_abts_els_sgl_list;
- struct lpfc_scsi_buf **lpfc_scsi_psb_array;
struct list_head lpfc_abts_scsi_buf_list;
- uint32_t total_sglq_bufs;
struct lpfc_sglq **lpfc_sglq_active_list;
struct list_head lpfc_rpi_hdr_list;
unsigned long *rpi_bmask;
@@ -509,7 +507,6 @@
struct list_head lpfc_rpi_blk_list;
unsigned long *xri_bmask;
uint16_t *xri_ids;
- uint16_t xri_count;
struct list_head lpfc_xri_blk_list;
unsigned long *vfi_bmask;
uint16_t *vfi_ids;
@@ -614,11 +611,7 @@
int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *);
uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *);
int lpfc_sli4_post_async_mbox(struct lpfc_hba *);
-int lpfc_sli4_post_els_sgl_list(struct lpfc_hba *phba);
-int lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba);
int lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *, struct list_head *, int);
-int lpfc_sli4_post_scsi_sgl_blk_ext(struct lpfc_hba *, struct list_head *,
- int);
struct lpfc_cq_event *__lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
struct lpfc_cq_event *lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
void __lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);