drivers/input/misc/pm8xxx-vibrator.c - kernel/msm-4.19 - Gitiles

 /* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/slab.h>
 #include <linux/mfd/pm8xxx/core.h>

 #define VIB_DRV			0x4A

 #define VIB_DRV_SEL_MASK	0xf8
 #define VIB_DRV_SEL_SHIFT	0x03
 #define VIB_DRV_EN_MANUAL_MASK	0xfc

 #define VIB_MAX_LEVEL_mV	(3100)
 #define VIB_MIN_LEVEL_mV	(1200)
 #define VIB_MAX_LEVELS		(VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV)

 #define MAX_FF_SPEED		0xff

 /**
  * struct pm8xxx_vib - structure to hold vibrator data
  * @vib_input_dev: input device supporting force feedback
  * @work: work structure to set the vibration parameters
  * @dev: device supporting force feedback
  * @speed: speed of vibration set from userland
  * @active: state of vibrator
  * @level: level of vibration to set in the chip
  * @reg_vib_drv: VIB_DRV register value
  */
 struct pm8xxx_vib {
 	struct input_dev *vib_input_dev;
 	struct work_struct work;
 	struct device *dev;
 	int speed;
 	int level;
 	bool active;
 	u8  reg_vib_drv;
 };

 /**
  * pm8xxx_vib_read_u8 - helper to read a byte from pmic chip
  * @vib: pointer to vibrator structure
  * @data: placeholder for data to be read
  * @reg: register address
  */
 static int pm8xxx_vib_read_u8(struct pm8xxx_vib *vib,
 				 u8 *data, u16 reg)
 {
 	int rc;

 	rc = pm8xxx_readb(vib->dev->parent, reg, data);
 	if (rc < 0)
 		dev_warn(vib->dev, "Error reading pm8xxx reg 0x%x(0x%x)\n",
 				reg, rc);
 	return rc;
 }

 /**
  * pm8xxx_vib_write_u8 - helper to write a byte to pmic chip
  * @vib: pointer to vibrator structure
  * @data: data to write
  * @reg: register address
  */
 static int pm8xxx_vib_write_u8(struct pm8xxx_vib *vib,
 				 u8 data, u16 reg)
 {
 	int rc;

 	rc = pm8xxx_writeb(vib->dev->parent, reg, data);
 	if (rc < 0)
 		dev_warn(vib->dev, "Error writing pm8xxx reg 0x%x(0x%x)\n",
 				reg, rc);
 	return rc;
 }

 /**
  * pm8xxx_vib_set - handler to start/stop vibration
  * @vib: pointer to vibrator structure
  * @on: state to set
  */
 static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
 {
 	int rc;
 	u8 val = vib->reg_vib_drv;

 	if (on)
 		val |= ((vib->level << VIB_DRV_SEL_SHIFT) & VIB_DRV_SEL_MASK);
 	else
 		val &= ~VIB_DRV_SEL_MASK;

 	rc = pm8xxx_vib_write_u8(vib, val, VIB_DRV);
 	if (rc < 0)
 		return rc;

 	vib->reg_vib_drv = val;
 	return 0;
 }

 /**
  * pm8xxx_work_handler - worker to set vibration level
  * @work: pointer to work_struct
  */
 static void pm8xxx_work_handler(struct work_struct *work)
 {
 	struct pm8xxx_vib *vib = container_of(work, struct pm8xxx_vib, work);
 	int rc;
 	u8 val;

 	rc = pm8xxx_vib_read_u8(vib, &val, VIB_DRV);
 	if (rc < 0)
 		return;

 	/*
 	 * pmic vibrator supports voltage ranges from 1.2 to 3.1V, so
 	 * scale the level to fit into these ranges.
 	 */
 	if (vib->speed) {
 		vib->active = true;
 		vib->level = ((VIB_MAX_LEVELS * vib->speed) / MAX_FF_SPEED) +
 						VIB_MIN_LEVEL_mV;
 		vib->level /= 100;
 	} else {
 		vib->active = false;
 		vib->level = VIB_MIN_LEVEL_mV / 100;
 	}

 	pm8xxx_vib_set(vib, vib->active);
 }

 /**
  * pm8xxx_vib_close - callback of input close callback
  * @dev: input device pointer
  *
  * Turns off the vibrator.
  */
 static void pm8xxx_vib_close(struct input_dev *dev)
 {
 	struct pm8xxx_vib *vib = input_get_drvdata(dev);

 	cancel_work_sync(&vib->work);
 	if (vib->active)
 		pm8xxx_vib_set(vib, false);
 }

 /**
  * pm8xxx_vib_play_effect - function to handle vib effects.
  * @dev: input device pointer
  * @data: data of effect
  * @effect: effect to play
  *
  * Currently this driver supports only rumble effects.
  */
 static int pm8xxx_vib_play_effect(struct input_dev *dev, void *data,
 				  struct ff_effect *effect)
 {
 	struct pm8xxx_vib *vib = input_get_drvdata(dev);

 	vib->speed = effect->u.rumble.strong_magnitude >> 8;
 	if (!vib->speed)
 		vib->speed = effect->u.rumble.weak_magnitude >> 9;

 	schedule_work(&vib->work);

 	return 0;
 }

 static int pm8xxx_vib_probe(struct platform_device *pdev)

 {
 	struct pm8xxx_vib *vib;
 	struct input_dev *input_dev;
 	int error;
 	u8 val;

 	vib = kzalloc(sizeof(*vib), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!vib || !input_dev) {
 		dev_err(&pdev->dev, "couldn't allocate memory\n");
 		error = -ENOMEM;
 		goto err_free_mem;
 	}

 	INIT_WORK(&vib->work, pm8xxx_work_handler);
 	vib->dev = &pdev->dev;
 	vib->vib_input_dev = input_dev;

 	/* operate in manual mode */
 	error = pm8xxx_vib_read_u8(vib, &val, VIB_DRV);
 	if (error < 0)
 		goto err_free_mem;
 	val &= ~VIB_DRV_EN_MANUAL_MASK;
 	error = pm8xxx_vib_write_u8(vib, val, VIB_DRV);
 	if (error < 0)
 		goto err_free_mem;

 	vib->reg_vib_drv = val;

 	input_dev->name = "pm8xxx_vib_ffmemless";
 	input_dev->id.version = 1;
 	input_dev->dev.parent = &pdev->dev;
 	input_dev->close = pm8xxx_vib_close;
 	input_set_drvdata(input_dev, vib);
 	input_set_capability(vib->vib_input_dev, EV_FF, FF_RUMBLE);

 	error = input_ff_create_memless(input_dev, NULL,
 					pm8xxx_vib_play_effect);
 	if (error) {
 		dev_err(&pdev->dev,
 			"couldn't register vibrator as FF device\n");
 		goto err_free_mem;
 	}

 	error = input_register_device(input_dev);
 	if (error) {
 		dev_err(&pdev->dev, "couldn't register input device\n");
 		goto err_destroy_memless;
 	}

 	platform_set_drvdata(pdev, vib);
 	return 0;

 err_destroy_memless:
 	input_ff_destroy(input_dev);
 err_free_mem:
 	input_free_device(input_dev);
 	kfree(vib);

 	return error;
 }

 static int pm8xxx_vib_remove(struct platform_device *pdev)
 {
 	struct pm8xxx_vib *vib = platform_get_drvdata(pdev);

 	input_unregister_device(vib->vib_input_dev);
 	kfree(vib);

 	return 0;
 }

 #ifdef CONFIG_PM_SLEEP
 static int pm8xxx_vib_suspend(struct device *dev)
 {
 	struct pm8xxx_vib *vib = dev_get_drvdata(dev);

 	/* Turn off the vibrator */
 	pm8xxx_vib_set(vib, false);

 	return 0;
 }
 #endif

 static SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL);

 static struct platform_driver pm8xxx_vib_driver = {
 	.probe		= pm8xxx_vib_probe,
 	.remove		= pm8xxx_vib_remove,
 	.driver		= {
 		.name	= "pm8xxx-vib",
 		.owner	= THIS_MODULE,
 		.pm	= &pm8xxx_vib_pm_ops,
 	},
 };
 module_platform_driver(pm8xxx_vib_driver);

 MODULE_ALIAS("platform:pm8xxx_vib");
 MODULE_DESCRIPTION("PMIC8xxx vibrator driver based on ff-memless framework");
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Amy Maloche <amaloche@codeaurora.org>");
	/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/kernel.h>
	#include <linux/errno.h>
	#include <linux/platform_device.h>
	#include <linux/input.h>
	#include <linux/slab.h>
	#include <linux/mfd/pm8xxx/core.h>

	#define VIB_DRV 0x4A

	#define VIB_DRV_SEL_MASK 0xf8
	#define VIB_DRV_SEL_SHIFT 0x03
	#define VIB_DRV_EN_MANUAL_MASK 0xfc

	#define VIB_MAX_LEVEL_mV (3100)
	#define VIB_MIN_LEVEL_mV (1200)
	#define VIB_MAX_LEVELS (VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV)

	#define MAX_FF_SPEED 0xff

	/**
	* struct pm8xxx_vib - structure to hold vibrator data
	* @vib_input_dev: input device supporting force feedback
	* @work: work structure to set the vibration parameters
	* @dev: device supporting force feedback
	* @speed: speed of vibration set from userland
	* @active: state of vibrator
	* @level: level of vibration to set in the chip
	* @reg_vib_drv: VIB_DRV register value
	*/
	struct pm8xxx_vib {
	struct input_dev *vib_input_dev;
	struct work_struct work;
	struct device *dev;
	int speed;
	int level;
	bool active;
	u8 reg_vib_drv;
	};

	/**
	* pm8xxx_vib_read_u8 - helper to read a byte from pmic chip
	* @vib: pointer to vibrator structure
	* @data: placeholder for data to be read
	* @reg: register address
	*/
	static int pm8xxx_vib_read_u8(struct pm8xxx_vib *vib,
	u8 *data, u16 reg)
	{
	int rc;

	rc = pm8xxx_readb(vib->dev->parent, reg, data);
	if (rc < 0)
	dev_warn(vib->dev, "Error reading pm8xxx reg 0x%x(0x%x)\n",
	reg, rc);
	return rc;
	}

	/**
	* pm8xxx_vib_write_u8 - helper to write a byte to pmic chip
	* @vib: pointer to vibrator structure
	* @data: data to write
	* @reg: register address
	*/
	static int pm8xxx_vib_write_u8(struct pm8xxx_vib *vib,
	u8 data, u16 reg)
	{
	int rc;

	rc = pm8xxx_writeb(vib->dev->parent, reg, data);
	if (rc < 0)
	dev_warn(vib->dev, "Error writing pm8xxx reg 0x%x(0x%x)\n",
	reg, rc);
	return rc;
	}

	/**
	* pm8xxx_vib_set - handler to start/stop vibration
	* @vib: pointer to vibrator structure
	* @on: state to set
	*/
	static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
	{
	int rc;
	u8 val = vib->reg_vib_drv;

	if (on)
	val \|= ((vib->level << VIB_DRV_SEL_SHIFT) & VIB_DRV_SEL_MASK);
	else
	val &= ~VIB_DRV_SEL_MASK;

	rc = pm8xxx_vib_write_u8(vib, val, VIB_DRV);
	if (rc < 0)
	return rc;

	vib->reg_vib_drv = val;
	return 0;
	}

	/**
	* pm8xxx_work_handler - worker to set vibration level
	* @work: pointer to work_struct
	*/
	static void pm8xxx_work_handler(struct work_struct *work)
	{
	struct pm8xxx_vib *vib = container_of(work, struct pm8xxx_vib, work);
	int rc;
	u8 val;

	rc = pm8xxx_vib_read_u8(vib, &val, VIB_DRV);
	if (rc < 0)
	return;

	/*
	* pmic vibrator supports voltage ranges from 1.2 to 3.1V, so
	* scale the level to fit into these ranges.
	*/
	if (vib->speed) {
	vib->active = true;
	vib->level = ((VIB_MAX_LEVELS * vib->speed) / MAX_FF_SPEED) +
	VIB_MIN_LEVEL_mV;
	vib->level /= 100;
	} else {
	vib->active = false;
	vib->level = VIB_MIN_LEVEL_mV / 100;
	}

	pm8xxx_vib_set(vib, vib->active);
	}

	/**
	* pm8xxx_vib_close - callback of input close callback
	* @dev: input device pointer
	*
	* Turns off the vibrator.
	*/
	static void pm8xxx_vib_close(struct input_dev *dev)
	{
	struct pm8xxx_vib *vib = input_get_drvdata(dev);

	cancel_work_sync(&vib->work);
	if (vib->active)
	pm8xxx_vib_set(vib, false);
	}

	/**
	* pm8xxx_vib_play_effect - function to handle vib effects.
	* @dev: input device pointer
	* @data: data of effect
	* @effect: effect to play
	*
	* Currently this driver supports only rumble effects.
	*/
	static int pm8xxx_vib_play_effect(struct input_dev dev, void data,
	struct ff_effect *effect)
	{
	struct pm8xxx_vib *vib = input_get_drvdata(dev);

	vib->speed = effect->u.rumble.strong_magnitude >> 8;
	if (!vib->speed)
	vib->speed = effect->u.rumble.weak_magnitude >> 9;

	schedule_work(&vib->work);

	return 0;
	}

	static int pm8xxx_vib_probe(struct platform_device *pdev)

	{
	struct pm8xxx_vib *vib;
	struct input_dev *input_dev;
	int error;
	u8 val;

	vib = kzalloc(sizeof(*vib), GFP_KERNEL);
	input_dev = input_allocate_device();
	if (!vib \|\| !input_dev) {
	dev_err(&pdev->dev, "couldn't allocate memory\n");
	error = -ENOMEM;
	goto err_free_mem;
	}

	INIT_WORK(&vib->work, pm8xxx_work_handler);
	vib->dev = &pdev->dev;
	vib->vib_input_dev = input_dev;

	/* operate in manual mode */
	error = pm8xxx_vib_read_u8(vib, &val, VIB_DRV);
	if (error < 0)
	goto err_free_mem;
	val &= ~VIB_DRV_EN_MANUAL_MASK;
	error = pm8xxx_vib_write_u8(vib, val, VIB_DRV);
	if (error < 0)
	goto err_free_mem;

	vib->reg_vib_drv = val;

	input_dev->name = "pm8xxx_vib_ffmemless";
	input_dev->id.version = 1;
	input_dev->dev.parent = &pdev->dev;
	input_dev->close = pm8xxx_vib_close;
	input_set_drvdata(input_dev, vib);
	input_set_capability(vib->vib_input_dev, EV_FF, FF_RUMBLE);

	error = input_ff_create_memless(input_dev, NULL,
	pm8xxx_vib_play_effect);
	if (error) {
	dev_err(&pdev->dev,
	"couldn't register vibrator as FF device\n");
	goto err_free_mem;
	}

	error = input_register_device(input_dev);
	if (error) {
	dev_err(&pdev->dev, "couldn't register input device\n");
	goto err_destroy_memless;
	}

	platform_set_drvdata(pdev, vib);
	return 0;

	err_destroy_memless:
	input_ff_destroy(input_dev);
	err_free_mem:
	input_free_device(input_dev);
	kfree(vib);

	return error;
	}

	static int pm8xxx_vib_remove(struct platform_device *pdev)
	{
	struct pm8xxx_vib *vib = platform_get_drvdata(pdev);

	input_unregister_device(vib->vib_input_dev);
	kfree(vib);

	return 0;
	}

	#ifdef CONFIG_PM_SLEEP
	static int pm8xxx_vib_suspend(struct device *dev)
	{
	struct pm8xxx_vib *vib = dev_get_drvdata(dev);

	/* Turn off the vibrator */
	pm8xxx_vib_set(vib, false);

	return 0;
	}
	#endif

	static SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL);

	static struct platform_driver pm8xxx_vib_driver = {
	.probe = pm8xxx_vib_probe,
	.remove = pm8xxx_vib_remove,
	.driver = {
	.name = "pm8xxx-vib",
	.owner = THIS_MODULE,
	.pm = &pm8xxx_vib_pm_ops,
	},
	};
	module_platform_driver(pm8xxx_vib_driver);

	MODULE_ALIAS("platform:pm8xxx_vib");
	MODULE_DESCRIPTION("PMIC8xxx vibrator driver based on ff-memless framework");
	MODULE_LICENSE("GPL v2");
	MODULE_AUTHOR("Amy Maloche <amaloche@codeaurora.org>");