| /* |
| drivers/net/tulip/pnic.c |
| |
| Maintained by Jeff Garzik <jgarzik@pobox.com> |
| Copyright 2000,2001 The Linux Kernel Team |
| Written/copyright 1994-2001 by Donald Becker. |
| |
| This software may be used and distributed according to the terms |
| of the GNU General Public License, incorporated herein by reference. |
| |
| Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} |
| for more information on this driver, or visit the project |
| Web page at http://sourceforge.net/projects/tulip/ |
| |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/jiffies.h> |
| #include "tulip.h" |
| |
| |
| void pnic_do_nway(struct net_device *dev) |
| { |
| struct tulip_private *tp = netdev_priv(dev); |
| void __iomem *ioaddr = tp->base_addr; |
| u32 phy_reg = ioread32(ioaddr + 0xB8); |
| u32 new_csr6 = tp->csr6 & ~0x40C40200; |
| |
| if (phy_reg & 0x78000000) { /* Ignore baseT4 */ |
| if (phy_reg & 0x20000000) dev->if_port = 5; |
| else if (phy_reg & 0x40000000) dev->if_port = 3; |
| else if (phy_reg & 0x10000000) dev->if_port = 4; |
| else if (phy_reg & 0x08000000) dev->if_port = 0; |
| tp->nwayset = 1; |
| new_csr6 = (dev->if_port & 1) ? 0x01860000 : 0x00420000; |
| iowrite32(0x32 | (dev->if_port & 1), ioaddr + CSR12); |
| if (dev->if_port & 1) |
| iowrite32(0x1F868, ioaddr + 0xB8); |
| if (phy_reg & 0x30000000) { |
| tp->full_duplex = 1; |
| new_csr6 |= 0x00000200; |
| } |
| if (tulip_debug > 1) |
| printk(KERN_DEBUG "%s: PNIC autonegotiated status %8.8x, %s.\n", |
| dev->name, phy_reg, medianame[dev->if_port]); |
| if (tp->csr6 != new_csr6) { |
| tp->csr6 = new_csr6; |
| /* Restart Tx */ |
| tulip_restart_rxtx(tp); |
| dev->trans_start = jiffies; |
| } |
| } |
| } |
| |
| void pnic_lnk_change(struct net_device *dev, int csr5) |
| { |
| struct tulip_private *tp = netdev_priv(dev); |
| void __iomem *ioaddr = tp->base_addr; |
| int phy_reg = ioread32(ioaddr + 0xB8); |
| |
| if (tulip_debug > 1) |
| printk(KERN_DEBUG "%s: PNIC link changed state %8.8x, CSR5 %8.8x.\n", |
| dev->name, phy_reg, csr5); |
| if (ioread32(ioaddr + CSR5) & TPLnkFail) { |
| iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkFail) | TPLnkPass, ioaddr + CSR7); |
| /* If we use an external MII, then we mustn't use the |
| * internal negotiation. |
| */ |
| if (tulip_media_cap[dev->if_port] & MediaIsMII) |
| return; |
| if (! tp->nwayset || time_after(jiffies, dev->trans_start + 1*HZ)) { |
| tp->csr6 = 0x00420000 | (tp->csr6 & 0x0000fdff); |
| iowrite32(tp->csr6, ioaddr + CSR6); |
| iowrite32(0x30, ioaddr + CSR12); |
| iowrite32(0x0201F078, ioaddr + 0xB8); /* Turn on autonegotiation. */ |
| dev->trans_start = jiffies; |
| } |
| } else if (ioread32(ioaddr + CSR5) & TPLnkPass) { |
| if (tulip_media_cap[dev->if_port] & MediaIsMII) { |
| spin_lock(&tp->lock); |
| tulip_check_duplex(dev); |
| spin_unlock(&tp->lock); |
| } else { |
| pnic_do_nway(dev); |
| } |
| iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkPass) | TPLnkFail, ioaddr + CSR7); |
| } |
| } |
| |
| void pnic_timer(unsigned long data) |
| { |
| struct net_device *dev = (struct net_device *)data; |
| struct tulip_private *tp = netdev_priv(dev); |
| void __iomem *ioaddr = tp->base_addr; |
| int next_tick = 60*HZ; |
| |
| if(!ioread32(ioaddr + CSR7)) { |
| /* the timer was called due to a work overflow |
| * in the interrupt handler. Skip the connection |
| * checks, the nic is definitively speaking with |
| * his link partner. |
| */ |
| goto too_good_connection; |
| } |
| |
| if (tulip_media_cap[dev->if_port] & MediaIsMII) { |
| spin_lock_irq(&tp->lock); |
| if (tulip_check_duplex(dev) > 0) |
| next_tick = 3*HZ; |
| spin_unlock_irq(&tp->lock); |
| } else { |
| int csr12 = ioread32(ioaddr + CSR12); |
| int new_csr6 = tp->csr6 & ~0x40C40200; |
| int phy_reg = ioread32(ioaddr + 0xB8); |
| int csr5 = ioread32(ioaddr + CSR5); |
| |
| if (tulip_debug > 1) |
| printk(KERN_DEBUG "%s: PNIC timer PHY status %8.8x, %s " |
| "CSR5 %8.8x.\n", |
| dev->name, phy_reg, medianame[dev->if_port], csr5); |
| if (phy_reg & 0x04000000) { /* Remote link fault */ |
| iowrite32(0x0201F078, ioaddr + 0xB8); |
| next_tick = 1*HZ; |
| tp->nwayset = 0; |
| } else if (phy_reg & 0x78000000) { /* Ignore baseT4 */ |
| pnic_do_nway(dev); |
| next_tick = 60*HZ; |
| } else if (csr5 & TPLnkFail) { /* 100baseTx link beat */ |
| if (tulip_debug > 1) |
| printk(KERN_DEBUG "%s: %s link beat failed, CSR12 %4.4x, " |
| "CSR5 %8.8x, PHY %3.3x.\n", |
| dev->name, medianame[dev->if_port], csr12, |
| ioread32(ioaddr + CSR5), ioread32(ioaddr + 0xB8)); |
| next_tick = 3*HZ; |
| if (tp->medialock) { |
| } else if (tp->nwayset && (dev->if_port & 1)) { |
| next_tick = 1*HZ; |
| } else if (dev->if_port == 0) { |
| dev->if_port = 3; |
| iowrite32(0x33, ioaddr + CSR12); |
| new_csr6 = 0x01860000; |
| iowrite32(0x1F868, ioaddr + 0xB8); |
| } else { |
| dev->if_port = 0; |
| iowrite32(0x32, ioaddr + CSR12); |
| new_csr6 = 0x00420000; |
| iowrite32(0x1F078, ioaddr + 0xB8); |
| } |
| if (tp->csr6 != new_csr6) { |
| tp->csr6 = new_csr6; |
| /* Restart Tx */ |
| tulip_restart_rxtx(tp); |
| dev->trans_start = jiffies; |
| if (tulip_debug > 1) |
| printk(KERN_INFO "%s: Changing PNIC configuration to %s " |
| "%s-duplex, CSR6 %8.8x.\n", |
| dev->name, medianame[dev->if_port], |
| tp->full_duplex ? "full" : "half", new_csr6); |
| } |
| } |
| } |
| too_good_connection: |
| mod_timer(&tp->timer, RUN_AT(next_tick)); |
| if(!ioread32(ioaddr + CSR7)) { |
| if (tulip_debug > 1) |
| printk(KERN_INFO "%s: sw timer wakeup.\n", dev->name); |
| disable_irq(dev->irq); |
| tulip_refill_rx(dev); |
| enable_irq(dev->irq); |
| iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); |
| } |
| } |