ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_
The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig
symbols so do so for the new Samsung drivers too, rather than using
ASOC_ as they currently are.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 11ff4ad..a6a6b5f 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,4 +1,4 @@
-config ASOC_SAMSUNG
+config SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PV310
select S3C64XX_DMA if ARCH_S3C64XX
@@ -34,51 +34,51 @@
config SND_SAMSUNG_I2S
tristate
-config ASOC_SAMSUNG_NEO1973_WM8753
+config SND_SOC_SAMSUNG_NEO1973_WM8753
tristate "SoC I2S Audio support for NEO1973 - WM8753"
- depends on ASOC_SAMSUNG && MACH_NEO1973_GTA01
+ depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA01
select SND_S3C24XX_I2S
select SND_SOC_WM8753
help
Say Y if you want to add support for SoC audio on smdk2440
with the WM8753.
-config ASOC_SAMSUNG_NEO1973_GTA02_WM8753
+config SND_SOC_SAMSUNG_NEO1973_GTA02_WM8753
tristate "Audio support for the Openmoko Neo FreeRunner (GTA02)"
- depends on ASOC_SAMSUNG && MACH_NEO1973_GTA02
+ depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA02
select SND_S3C24XX_I2S
select SND_SOC_WM8753
help
This driver provides audio support for the Openmoko Neo FreeRunner
smartphone.
-config ASOC_SAMSUNG_JIVE_WM8750
+config SND_SOC_SAMSUNG_JIVE_WM8750
tristate "SoC I2S Audio support for Jive"
- depends on ASOC_SAMSUNG && MACH_JIVE
+ depends on SND_SOC_SAMSUNG && MACH_JIVE
select SND_SOC_WM8750
select SND_S3C2412_SOC_I2S
help
Sat Y if you want to add support for SoC audio on the Jive.
-config ASOC_SAMSUNG_SMDK_WM8580
+config SND_SOC_SAMSUNG_SMDK_WM8580
tristate "SoC I2S Audio support for WM8580 on SMDK"
- depends on ASOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDK6440 || MACH_SMDK6450 || MACH_SMDK6442 || MACH_SMDKV210 || MACH_SMDKC110)
+ depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDK6440 || MACH_SMDK6450 || MACH_SMDK6442 || MACH_SMDKV210 || MACH_SMDKC110)
select SND_SOC_WM8580
select SND_SAMSUNG_I2S
help
Say Y if you want to add support for SoC audio on the SMDKs.
-config ASOC_SAMSUNG_SMDK_WM8994
+config SND_SOC_SAMSUNG_SMDK_WM8994
tristate "SoC I2S Audio support for WM8994 on SMDK"
- depends on ASOC_SAMSUNG && (MACH_SMDKV310 || MACH_SMDKC210)
+ depends on SND_SOC_SAMSUNG && (MACH_SMDKV310 || MACH_SMDKC210)
select SND_SOC_WM8994
select SND_SAMSUNG_I2S
help
Say Y if you want to add support for SoC audio on the SMDKs.
-config ASOC_SAMSUNG_SMDK2443_WM9710
+config SND_SOC_SAMSUNG_SMDK2443_WM9710
tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
- depends on ASOC_SAMSUNG && MACH_SMDK2443
+ depends on SND_SOC_SAMSUNG && MACH_SMDK2443
select S3C2410_DMA
select AC97_BUS
select SND_SOC_AC97_CODEC
@@ -87,9 +87,9 @@
Say Y if you want to add support for SoC audio on smdk2443
with the WM9710.
-config ASOC_SAMSUNG_LN2440SBC_ALC650
+config SND_SOC_SAMSUNG_LN2440SBC_ALC650
tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
- depends on ASOC_SAMSUNG && ARCH_S3C2410
+ depends on SND_SOC_SAMSUNG && ARCH_S3C2410
select S3C2410_DMA
select AC97_BUS
select SND_SOC_AC97_CODEC
@@ -98,74 +98,74 @@
Say Y if you want to add support for SoC audio on ln2440sbc
with the ALC650.
-config ASOC_SAMSUNG_S3C24XX_UDA134X
+config SND_SOC_SAMSUNG_S3C24XX_UDA134X
tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
- depends on ASOC_SAMSUNG && ARCH_S3C2410
+ depends on SND_SOC_SAMSUNG && ARCH_S3C2410
select SND_S3C24XX_I2S
select SND_SOC_L3
select SND_SOC_UDA134X
-config ASOC_SAMSUNG_SIMTEC
+config SND_SOC_SAMSUNG_SIMTEC
tristate
help
Internal node for common S3C24XX/Simtec suppor
-config ASOC_SAMSUNG_SIMTEC_TLV320AIC23
+config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23
tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
- depends on ASOC_SAMSUNG && ARCH_S3C2410
+ depends on SND_SOC_SAMSUNG && ARCH_S3C2410
select SND_S3C24XX_I2S
select SND_SOC_TLV320AIC23
- select ASOC_SAMSUNG_SIMTEC
+ select SND_SOC_SAMSUNG_SIMTEC
-config ASOC_SAMSUNG_SIMTEC_HERMES
+config SND_SOC_SAMSUNG_SIMTEC_HERMES
tristate "SoC I2S Audio support for Simtec Hermes board"
- depends on ASOC_SAMSUNG && ARCH_S3C2410
+ depends on SND_SOC_SAMSUNG && ARCH_S3C2410
select SND_S3C24XX_I2S
select SND_SOC_TLV320AIC3X
- select ASOC_SAMSUNG_SIMTEC
+ select SND_SOC_SAMSUNG_SIMTEC
-config ASOC_SAMSUNG_H1940_UDA1380
+config SND_SOC_SAMSUNG_H1940_UDA1380
tristate "Audio support for the HP iPAQ H1940"
- depends on ASOC_SAMSUNG && ARCH_H1940
+ depends on SND_SOC_SAMSUNG && ARCH_H1940
select SND_S3C24XX_I2S
select SND_SOC_UDA1380
help
This driver provides audio support for HP iPAQ h1940 PDA.
-config ASOC_SAMSUNG_RX1950_UDA1380
+config SND_SOC_SAMSUNG_RX1950_UDA1380
tristate "Audio support for the HP iPAQ RX1950"
- depends on ASOC_SAMSUNG && MACH_RX1950
+ depends on SND_SOC_SAMSUNG && MACH_RX1950
select SND_S3C24XX_I2S
select SND_SOC_UDA1380
help
This driver provides audio support for HP iPAQ RX1950 PDA.
-config ASOC_SAMSUNG_SMDK_WM9713
+config SND_SOC_SAMSUNG_SMDK_WM9713
tristate "SoC AC97 Audio support for SMDK with WM9713"
- depends on ASOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310 || MACH_SMDKC210)
+ depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310 || MACH_SMDKC210)
select SND_SOC_WM9713
select SND_SAMSUNG_AC97
help
Sat Y if you want to add support for SoC audio on the SMDK.
-config ASOC_SMARTQ
+config SND_SOC_SMARTQ
tristate "SoC I2S Audio support for SmartQ board"
- depends on ASOC_SAMSUNG && MACH_SMARTQ
+ depends on SND_SOC_SAMSUNG && MACH_SMARTQ
select SND_SAMSUNG_I2S
select SND_SOC_WM8750
-config ASOC_GONI_AQUILA_WM8994
+config SND_SOC_GONI_AQUILA_WM8994
tristate "SoC I2S Audio support for AQUILA/GONI - WM8994"
- depends on ASOC_SAMSUNG && (MACH_GONI || MACH_AQUILA)
+ depends on SND_SOC_SAMSUNG && (MACH_GONI || MACH_AQUILA)
select SND_SAMSUNG_I2S
select SND_SOC_WM8994
help
Say Y if you want to add support for SoC audio on goni or aquila
with the WM8994.
-config ASOC_SAMSUNG_SMDK_SPDIF
+config SND_SOC_SAMSUNG_SMDK_SPDIF
tristate "SoC S/PDIF Audio support for SMDK"
- depends on ASOC_SAMSUNG && (MACH_SMDKC100 || MACH_SMDKC110 || MACH_SMDKV210)
+ depends on SND_SOC_SAMSUNG && (MACH_SMDKC100 || MACH_SMDKC110 || MACH_SMDKV210)
select SND_SAMSUNG_SPDIF
help
Say Y if you want to add support for SoC S/PDIF audio on the SMDK.