rt2x00: Gather channel information in structure
Channel information which is read from EEPROM should
be read into an array containing per-channel information.
This removes the requirement of multiple arrays and makes
the channel handling a bit cleaner and easier to expand.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 4c0538d..0107cec 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1404,7 +1404,7 @@
* RF value list for RF2420 & RF2421
* Supports: 2.4 GHz
*/
-static const struct rf_channel rf_vals_bg[] = {
+static const struct rf_channel rf_vals_b[] = {
{ 1, 0x00022058, 0x000c1fda, 0x00000101, 0 },
{ 2, 0x00022058, 0x000c1fee, 0x00000101, 0 },
{ 3, 0x00022058, 0x000c2002, 0x00000101, 0 },
@@ -1421,10 +1421,11 @@
{ 14, 0x00022058, 0x000c20fa, 0x00000101, 0 },
};
-static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
@@ -1440,23 +1441,28 @@
EEPROM_MAC_ADDR_0));
/*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- /*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
- spec->num_channels = ARRAY_SIZE(rf_vals_bg);
- spec->channels = rf_vals_bg;
+ spec->num_channels = ARRAY_SIZE(rf_vals_b);
+ spec->channels = rf_vals_b;
+
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ return 0;
}
static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -1477,7 +1483,9 @@
/*
* Initialize hw specifications.
*/
- rt2400pci_probe_hw_mode(rt2x00dev);
+ retval = rt2400pci_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires the atim queue and DMA-mapped skbs.
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index bc55642..bbff381 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -938,19 +938,13 @@
#define MAX_TXPOWER 62
#define DEFAULT_TXPOWER 39
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \
- ((__txpower) < MIN_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \
- (((__txpower) - MAX_TXPOWER) + MIN_TXPOWER); \
-})
+#define __CLAMP_TX(__txpower) \
+ clamp_t(char, (__txpower), MIN_TXPOWER, MAX_TXPOWER)
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- (__txpower) += MIN_TXPOWER; \
- ((__txpower) <= MIN_TXPOWER) ? MAX_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MIN_TXPOWER : \
- (MAX_TXPOWER - ((__txpower) - MIN_TXPOWER))); \
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+ ((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER)
+
+#define TXPOWER_TO_DEV(__txpower) \
+ MAX_TXPOWER - (__CLAMP_TX(__txpower) - MIN_TXPOWER)
#endif /* RT2400PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 181a146..e0ff76f 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1721,10 +1721,11 @@
{ 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
};
-static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
@@ -1741,20 +1742,10 @@
EEPROM_MAC_ADDR_0));
/*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- /*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
@@ -1776,6 +1767,26 @@
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
}
+
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = DEFAULT_TXPOWER;
+ }
+
+ return 0;
}
static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -1796,7 +1807,9 @@
/*
* Initialize hw specifications.
*/
- rt2500pci_probe_hw_mode(rt2x00dev);
+ retval = rt2500pci_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires the atim queue and DMA-mapped skbs.
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h
index 42f3769..8c26bef 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.h
+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
@@ -1223,17 +1223,10 @@
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? \
- DEFAULT_TXPOWER : (__txpower); \
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
- (__txpower)); \
-})
+#define TXPOWER_TO_DEV(__txpower) \
+ clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT2500PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index cd5af65..3b90ed6 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1665,10 +1665,11 @@
{ 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
};
-static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
@@ -1687,20 +1688,10 @@
EEPROM_MAC_ADDR_0));
/*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- /*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
@@ -1722,6 +1713,26 @@
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
}
+
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = DEFAULT_TXPOWER;
+ }
+
+ return 0;
}
static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -1742,7 +1753,9 @@
/*
* Initialize hw specifications.
*/
- rt2500usb_probe_hw_mode(rt2x00dev);
+ retval = rt2500usb_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires the atim queue
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index 4769ffe..89e5ed2 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -825,17 +825,10 @@
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? \
- DEFAULT_TXPOWER : (__txpower); \
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
- (__txpower)); \
-})
+#define TXPOWER_TO_DEV(__txpower) \
+ clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT2500USB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 0ffd972..323bd54 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -144,6 +144,17 @@
};
/*
+ * Channel information structure
+ */
+struct channel_info {
+ unsigned int flags;
+#define GEOGRAPHY_ALLOWED 0x00000001
+
+ short tx_power1;
+ short tx_power2;
+};
+
+/*
* Antenna setup values.
*/
struct antenna_setup {
@@ -394,10 +405,7 @@
* @num_channels: Number of supported channels. This is used as array size
* for @tx_power_a, @tx_power_bg and @channels.
* @channels: Device/chipset specific channel values (See &struct rf_channel).
- * @tx_power_a: TX power values for all 5.2GHz channels (may be NULL).
- * @tx_power_bg: TX power values for all 2.4GHz channels (may be NULL).
- * @tx_power_default: Default TX power value to use when either
- * @tx_power_a or @tx_power_bg is missing.
+ * @channels_info: Additional information for channels (See &struct channel_info).
*/
struct hw_mode_spec {
unsigned int supported_bands;
@@ -410,10 +418,7 @@
unsigned int num_channels;
const struct rf_channel *channels;
-
- const u8 *tx_power_a;
- const u8 *tx_power_bg;
- u8 tx_power_default;
+ const struct channel_info *channels_info;
};
/*
@@ -425,7 +430,9 @@
*/
struct rt2x00lib_conf {
struct ieee80211_conf *conf;
+
struct rf_channel rf;
+ struct channel_info channel;
struct antenna_setup ant;
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index d134c3b..ea37c79 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -245,6 +245,10 @@
memcpy(&libconf.rf,
&rt2x00dev->spec.channels[conf->channel->hw_value],
sizeof(libconf.rf));
+
+ memcpy(&libconf.channel,
+ &rt2x00dev->spec.channels_info[conf->channel->hw_value],
+ sizeof(libconf.channel));
}
if (flags & CONFIG_UPDATE_ANTENNA) {
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 1829522..328ff8b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -818,7 +818,6 @@
struct ieee80211_rate *rates;
unsigned int num_rates;
unsigned int i;
- unsigned char tx_power;
num_rates = 0;
if (spec->supported_rates & SUPPORT_RATE_CCK)
@@ -844,20 +843,9 @@
* Initialize Channel list.
*/
for (i = 0; i < spec->num_channels; i++) {
- if (spec->channels[i].channel <= 14) {
- if (spec->tx_power_bg)
- tx_power = spec->tx_power_bg[i];
- else
- tx_power = spec->tx_power_default;
- } else {
- if (spec->tx_power_a)
- tx_power = spec->tx_power_a[i];
- else
- tx_power = spec->tx_power_default;
- }
-
rt2x00lib_channel(&channels[i],
- spec->channels[i].channel, tx_power, i);
+ spec->channels[i].channel,
+ spec->channels_info[i].tx_power1, i);
}
/*
@@ -909,6 +897,8 @@
rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
}
+
+ kfree(rt2x00dev->spec.channels_info);
}
static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 86e7a50..87012f8 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2514,10 +2514,11 @@
{ 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 },
};
-static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
@@ -2534,20 +2535,10 @@
EEPROM_MAC_ADDR_0));
/*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- /*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) {
spec->num_channels = 14;
@@ -2561,13 +2552,28 @@
rt2x00_rf(&rt2x00dev->chip, RF5325)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_seq);
-
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- spec->tx_power_a = txpower;
}
+
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ }
+
+ return 0;
}
static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -2588,7 +2594,9 @@
/*
* Initialize hw specifications.
*/
- rt61pci_probe_hw_mode(rt2x00dev);
+ retval = rt61pci_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires firmware and DMA mapped skbs.
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 6d591ce..8ec1451 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -1482,17 +1482,10 @@
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? \
- DEFAULT_TXPOWER : (__txpower); \
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
- (__txpower)); \
-})
+#define TXPOWER_TO_DEV(__txpower) \
+ clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT61PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index ddba747..1bd6b3f 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2107,10 +2107,11 @@
};
-static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
@@ -2127,20 +2128,10 @@
EEPROM_MAC_ADDR_0));
/*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- /*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
@@ -2158,14 +2149,26 @@
spec->channels = rf_vals_5225_2527;
}
- if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
- rt2x00_rf(&rt2x00dev->chip, RF5226)) {
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
- spec->tx_power_a = txpower;
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
}
+
+ return 0;
}
static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -2186,7 +2189,9 @@
/*
* Initialize hw specifications.
*/
- rt73usb_probe_hw_mode(rt2x00dev);
+ retval = rt73usb_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires firmware.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 91e04d3..868386c 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -1050,17 +1050,10 @@
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? \
- DEFAULT_TXPOWER : (__txpower); \
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
- (__txpower)); \
-})
+#define TXPOWER_TO_DEV(__txpower) \
+ clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT73USB_H */