| /* |
| * Driver for the i2c controller on the Marvell line of host bridges |
| * (e.g, gt642[46]0, mv643[46]0, mv644[46]0, and Orion SoC family). |
| * |
| * Author: Mark A. Greer <mgreer@mvista.com> |
| * |
| * 2005 (c) MontaVista, Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/spinlock.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/mv643xx_i2c.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_irq.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| |
| #define MV64XXX_I2C_ADDR_ADDR(val) ((val & 0x7f) << 1) |
| #define MV64XXX_I2C_BAUD_DIV_N(val) (val & 0x7) |
| #define MV64XXX_I2C_BAUD_DIV_M(val) ((val & 0xf) << 3) |
| |
| #define MV64XXX_I2C_REG_CONTROL_ACK 0x00000004 |
| #define MV64XXX_I2C_REG_CONTROL_IFLG 0x00000008 |
| #define MV64XXX_I2C_REG_CONTROL_STOP 0x00000010 |
| #define MV64XXX_I2C_REG_CONTROL_START 0x00000020 |
| #define MV64XXX_I2C_REG_CONTROL_TWSIEN 0x00000040 |
| #define MV64XXX_I2C_REG_CONTROL_INTEN 0x00000080 |
| |
| /* Ctlr status values */ |
| #define MV64XXX_I2C_STATUS_BUS_ERR 0x00 |
| #define MV64XXX_I2C_STATUS_MAST_START 0x08 |
| #define MV64XXX_I2C_STATUS_MAST_REPEAT_START 0x10 |
| #define MV64XXX_I2C_STATUS_MAST_WR_ADDR_ACK 0x18 |
| #define MV64XXX_I2C_STATUS_MAST_WR_ADDR_NO_ACK 0x20 |
| #define MV64XXX_I2C_STATUS_MAST_WR_ACK 0x28 |
| #define MV64XXX_I2C_STATUS_MAST_WR_NO_ACK 0x30 |
| #define MV64XXX_I2C_STATUS_MAST_LOST_ARB 0x38 |
| #define MV64XXX_I2C_STATUS_MAST_RD_ADDR_ACK 0x40 |
| #define MV64XXX_I2C_STATUS_MAST_RD_ADDR_NO_ACK 0x48 |
| #define MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK 0x50 |
| #define MV64XXX_I2C_STATUS_MAST_RD_DATA_NO_ACK 0x58 |
| #define MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK 0xd0 |
| #define MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK 0xd8 |
| #define MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK 0xe0 |
| #define MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK 0xe8 |
| #define MV64XXX_I2C_STATUS_NO_STATUS 0xf8 |
| |
| /* Register defines (I2C bridge) */ |
| #define MV64XXX_I2C_REG_TX_DATA_LO 0xc0 |
| #define MV64XXX_I2C_REG_TX_DATA_HI 0xc4 |
| #define MV64XXX_I2C_REG_RX_DATA_LO 0xc8 |
| #define MV64XXX_I2C_REG_RX_DATA_HI 0xcc |
| #define MV64XXX_I2C_REG_BRIDGE_CONTROL 0xd0 |
| #define MV64XXX_I2C_REG_BRIDGE_STATUS 0xd4 |
| #define MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE 0xd8 |
| #define MV64XXX_I2C_REG_BRIDGE_INTR_MASK 0xdC |
| #define MV64XXX_I2C_REG_BRIDGE_TIMING 0xe0 |
| |
| /* Bridge Control values */ |
| #define MV64XXX_I2C_BRIDGE_CONTROL_WR 0x00000001 |
| #define MV64XXX_I2C_BRIDGE_CONTROL_RD 0x00000002 |
| #define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT 2 |
| #define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT 0x00001000 |
| #define MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT 13 |
| #define MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT 16 |
| #define MV64XXX_I2C_BRIDGE_CONTROL_ENABLE 0x00080000 |
| |
| /* Bridge Status values */ |
| #define MV64XXX_I2C_BRIDGE_STATUS_ERROR 0x00000001 |
| #define MV64XXX_I2C_STATUS_OFFLOAD_ERROR 0xf0000001 |
| #define MV64XXX_I2C_STATUS_OFFLOAD_OK 0xf0000000 |
| |
| |
| /* Driver states */ |
| enum { |
| MV64XXX_I2C_STATE_INVALID, |
| MV64XXX_I2C_STATE_IDLE, |
| MV64XXX_I2C_STATE_WAITING_FOR_START_COND, |
| MV64XXX_I2C_STATE_WAITING_FOR_RESTART, |
| MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK, |
| MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK, |
| MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK, |
| MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA, |
| }; |
| |
| /* Driver actions */ |
| enum { |
| MV64XXX_I2C_ACTION_INVALID, |
| MV64XXX_I2C_ACTION_CONTINUE, |
| MV64XXX_I2C_ACTION_OFFLOAD_SEND_START, |
| MV64XXX_I2C_ACTION_SEND_START, |
| MV64XXX_I2C_ACTION_SEND_RESTART, |
| MV64XXX_I2C_ACTION_OFFLOAD_RESTART, |
| MV64XXX_I2C_ACTION_SEND_ADDR_1, |
| MV64XXX_I2C_ACTION_SEND_ADDR_2, |
| MV64XXX_I2C_ACTION_SEND_DATA, |
| MV64XXX_I2C_ACTION_RCV_DATA, |
| MV64XXX_I2C_ACTION_RCV_DATA_STOP, |
| MV64XXX_I2C_ACTION_SEND_STOP, |
| MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP, |
| }; |
| |
| struct mv64xxx_i2c_regs { |
| u8 addr; |
| u8 ext_addr; |
| u8 data; |
| u8 control; |
| u8 status; |
| u8 clock; |
| u8 soft_reset; |
| }; |
| |
| struct mv64xxx_i2c_data { |
| struct i2c_msg *msgs; |
| int num_msgs; |
| int irq; |
| u32 state; |
| u32 action; |
| u32 aborting; |
| u32 cntl_bits; |
| void __iomem *reg_base; |
| struct mv64xxx_i2c_regs reg_offsets; |
| u32 addr1; |
| u32 addr2; |
| u32 bytes_left; |
| u32 byte_posn; |
| u32 send_stop; |
| u32 block; |
| int rc; |
| u32 freq_m; |
| u32 freq_n; |
| #if defined(CONFIG_HAVE_CLK) |
| struct clk *clk; |
| #endif |
| wait_queue_head_t waitq; |
| spinlock_t lock; |
| struct i2c_msg *msg; |
| struct i2c_adapter adapter; |
| bool offload_enabled; |
| /* 5us delay in order to avoid repeated start timing violation */ |
| bool errata_delay; |
| }; |
| |
| static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = { |
| .addr = 0x00, |
| .ext_addr = 0x10, |
| .data = 0x04, |
| .control = 0x08, |
| .status = 0x0c, |
| .clock = 0x0c, |
| .soft_reset = 0x1c, |
| }; |
| |
| static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_sun4i = { |
| .addr = 0x00, |
| .ext_addr = 0x04, |
| .data = 0x08, |
| .control = 0x0c, |
| .status = 0x10, |
| .clock = 0x14, |
| .soft_reset = 0x18, |
| }; |
| |
| static void |
| mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data, |
| struct i2c_msg *msg) |
| { |
| u32 dir = 0; |
| |
| drv_data->msg = msg; |
| drv_data->byte_posn = 0; |
| drv_data->bytes_left = msg->len; |
| drv_data->aborting = 0; |
| drv_data->rc = 0; |
| drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK | |
| MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN; |
| |
| if (msg->flags & I2C_M_RD) |
| dir = 1; |
| |
| if (msg->flags & I2C_M_TEN) { |
| drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir; |
| drv_data->addr2 = (u32)msg->addr & 0xff; |
| } else { |
| drv_data->addr1 = MV64XXX_I2C_ADDR_ADDR((u32)msg->addr) | dir; |
| drv_data->addr2 = 0; |
| } |
| } |
| |
| static int mv64xxx_i2c_offload_msg(struct mv64xxx_i2c_data *drv_data) |
| { |
| unsigned long data_reg_hi = 0; |
| unsigned long data_reg_lo = 0; |
| unsigned long ctrl_reg; |
| struct i2c_msg *msg = drv_data->msgs; |
| |
| drv_data->msg = msg; |
| drv_data->byte_posn = 0; |
| drv_data->bytes_left = msg->len; |
| drv_data->aborting = 0; |
| drv_data->rc = 0; |
| /* Only regular transactions can be offloaded */ |
| if ((msg->flags & ~(I2C_M_TEN | I2C_M_RD)) != 0) |
| return -EINVAL; |
| |
| /* Only 1-8 byte transfers can be offloaded */ |
| if (msg->len < 1 || msg->len > 8) |
| return -EINVAL; |
| |
| /* Build transaction */ |
| ctrl_reg = MV64XXX_I2C_BRIDGE_CONTROL_ENABLE | |
| (msg->addr << MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT); |
| |
| if ((msg->flags & I2C_M_TEN) != 0) |
| ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT; |
| |
| if ((msg->flags & I2C_M_RD) == 0) { |
| u8 local_buf[8] = { 0 }; |
| |
| memcpy(local_buf, msg->buf, msg->len); |
| data_reg_lo = cpu_to_le32(*((u32 *)local_buf)); |
| data_reg_hi = cpu_to_le32(*((u32 *)(local_buf+4))); |
| |
| ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_WR | |
| (msg->len - 1) << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT; |
| |
| writel(data_reg_lo, |
| drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_LO); |
| writel(data_reg_hi, |
| drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_HI); |
| |
| } else { |
| ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_RD | |
| (msg->len - 1) << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT; |
| } |
| |
| /* Execute transaction */ |
| writel(ctrl_reg, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL); |
| |
| return 0; |
| } |
| |
| static void |
| mv64xxx_i2c_update_offload_data(struct mv64xxx_i2c_data *drv_data) |
| { |
| struct i2c_msg *msg = drv_data->msg; |
| |
| if (msg->flags & I2C_M_RD) { |
| u32 data_reg_lo = readl(drv_data->reg_base + |
| MV64XXX_I2C_REG_RX_DATA_LO); |
| u32 data_reg_hi = readl(drv_data->reg_base + |
| MV64XXX_I2C_REG_RX_DATA_HI); |
| u8 local_buf[8] = { 0 }; |
| |
| *((u32 *)local_buf) = le32_to_cpu(data_reg_lo); |
| *((u32 *)(local_buf+4)) = le32_to_cpu(data_reg_hi); |
| memcpy(msg->buf, local_buf, msg->len); |
| } |
| |
| } |
| /* |
| ***************************************************************************** |
| * |
| * Finite State Machine & Interrupt Routines |
| * |
| ***************************************************************************** |
| */ |
| |
| /* Reset hardware and initialize FSM */ |
| static void |
| mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data) |
| { |
| if (drv_data->offload_enabled) { |
| writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL); |
| writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_TIMING); |
| writel(0, drv_data->reg_base + |
| MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE); |
| writel(0, drv_data->reg_base + |
| MV64XXX_I2C_REG_BRIDGE_INTR_MASK); |
| } |
| |
| writel(0, drv_data->reg_base + drv_data->reg_offsets.soft_reset); |
| writel(MV64XXX_I2C_BAUD_DIV_M(drv_data->freq_m) | MV64XXX_I2C_BAUD_DIV_N(drv_data->freq_n), |
| drv_data->reg_base + drv_data->reg_offsets.clock); |
| writel(0, drv_data->reg_base + drv_data->reg_offsets.addr); |
| writel(0, drv_data->reg_base + drv_data->reg_offsets.ext_addr); |
| writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP, |
| drv_data->reg_base + drv_data->reg_offsets.control); |
| drv_data->state = MV64XXX_I2C_STATE_IDLE; |
| } |
| |
| static void |
| mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status) |
| { |
| /* |
| * If state is idle, then this is likely the remnants of an old |
| * operation that driver has given up on or the user has killed. |
| * If so, issue the stop condition and go to idle. |
| */ |
| if (drv_data->state == MV64XXX_I2C_STATE_IDLE) { |
| drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; |
| return; |
| } |
| |
| /* The status from the ctlr [mostly] tells us what to do next */ |
| switch (status) { |
| /* Start condition interrupt */ |
| case MV64XXX_I2C_STATUS_MAST_START: /* 0x08 */ |
| case MV64XXX_I2C_STATUS_MAST_REPEAT_START: /* 0x10 */ |
| drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_1; |
| drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK; |
| break; |
| |
| /* Performing a write */ |
| case MV64XXX_I2C_STATUS_MAST_WR_ADDR_ACK: /* 0x18 */ |
| if (drv_data->msg->flags & I2C_M_TEN) { |
| drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_2; |
| drv_data->state = |
| MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK; |
| break; |
| } |
| /* FALLTHRU */ |
| case MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */ |
| case MV64XXX_I2C_STATUS_MAST_WR_ACK: /* 0x28 */ |
| if ((drv_data->bytes_left == 0) |
| || (drv_data->aborting |
| && (drv_data->byte_posn != 0))) { |
| if (drv_data->send_stop || drv_data->aborting) { |
| drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; |
| drv_data->state = MV64XXX_I2C_STATE_IDLE; |
| } else { |
| drv_data->action = |
| MV64XXX_I2C_ACTION_SEND_RESTART; |
| drv_data->state = |
| MV64XXX_I2C_STATE_WAITING_FOR_RESTART; |
| } |
| } else { |
| drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA; |
| drv_data->state = |
| MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK; |
| drv_data->bytes_left--; |
| } |
| break; |
| |
| /* Performing a read */ |
| case MV64XXX_I2C_STATUS_MAST_RD_ADDR_ACK: /* 40 */ |
| if (drv_data->msg->flags & I2C_M_TEN) { |
| drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_2; |
| drv_data->state = |
| MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK; |
| break; |
| } |
| /* FALLTHRU */ |
| case MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */ |
| if (drv_data->bytes_left == 0) { |
| drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; |
| drv_data->state = MV64XXX_I2C_STATE_IDLE; |
| break; |
| } |
| /* FALLTHRU */ |
| case MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK: /* 0x50 */ |
| if (status != MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK) |
| drv_data->action = MV64XXX_I2C_ACTION_CONTINUE; |
| else { |
| drv_data->action = MV64XXX_I2C_ACTION_RCV_DATA; |
| drv_data->bytes_left--; |
| } |
| drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA; |
| |
| if ((drv_data->bytes_left == 1) || drv_data->aborting) |
| drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_ACK; |
| break; |
| |
| case MV64XXX_I2C_STATUS_MAST_RD_DATA_NO_ACK: /* 0x58 */ |
| drv_data->action = MV64XXX_I2C_ACTION_RCV_DATA_STOP; |
| drv_data->state = MV64XXX_I2C_STATE_IDLE; |
| break; |
| |
| case MV64XXX_I2C_STATUS_MAST_WR_ADDR_NO_ACK: /* 0x20 */ |
| case MV64XXX_I2C_STATUS_MAST_WR_NO_ACK: /* 30 */ |
| case MV64XXX_I2C_STATUS_MAST_RD_ADDR_NO_ACK: /* 48 */ |
| /* Doesn't seem to be a device at other end */ |
| drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; |
| drv_data->state = MV64XXX_I2C_STATE_IDLE; |
| drv_data->rc = -ENXIO; |
| break; |
| |
| case MV64XXX_I2C_STATUS_OFFLOAD_OK: |
| if (drv_data->send_stop || drv_data->aborting) { |
| drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP; |
| drv_data->state = MV64XXX_I2C_STATE_IDLE; |
| } else { |
| drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_RESTART; |
| drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_RESTART; |
| } |
| break; |
| |
| default: |
| dev_err(&drv_data->adapter.dev, |
| "mv64xxx_i2c_fsm: Ctlr Error -- state: 0x%x, " |
| "status: 0x%x, addr: 0x%x, flags: 0x%x\n", |
| drv_data->state, status, drv_data->msg->addr, |
| drv_data->msg->flags); |
| drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; |
| mv64xxx_i2c_hw_init(drv_data); |
| drv_data->rc = -EIO; |
| } |
| } |
| |
| static void |
| mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) |
| { |
| switch(drv_data->action) { |
| case MV64XXX_I2C_ACTION_OFFLOAD_RESTART: |
| mv64xxx_i2c_update_offload_data(drv_data); |
| writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL); |
| writel(0, drv_data->reg_base + |
| MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE); |
| /* FALLTHRU */ |
| case MV64XXX_I2C_ACTION_SEND_RESTART: |
| /* We should only get here if we have further messages */ |
| BUG_ON(drv_data->num_msgs == 0); |
| |
| drv_data->msgs++; |
| drv_data->num_msgs--; |
| if (!(drv_data->offload_enabled && |
| mv64xxx_i2c_offload_msg(drv_data))) { |
| drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START; |
| writel(drv_data->cntl_bits, |
| drv_data->reg_base + drv_data->reg_offsets.control); |
| |
| /* Setup for the next message */ |
| mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs); |
| } |
| if (drv_data->errata_delay) |
| udelay(5); |
| |
| /* |
| * We're never at the start of the message here, and by this |
| * time it's already too late to do any protocol mangling. |
| * Thankfully, do not advertise support for that feature. |
| */ |
| drv_data->send_stop = drv_data->num_msgs == 1; |
| break; |
| |
| case MV64XXX_I2C_ACTION_CONTINUE: |
| writel(drv_data->cntl_bits, |
| drv_data->reg_base + drv_data->reg_offsets.control); |
| break; |
| |
| case MV64XXX_I2C_ACTION_OFFLOAD_SEND_START: |
| if (!mv64xxx_i2c_offload_msg(drv_data)) |
| break; |
| else |
| drv_data->action = MV64XXX_I2C_ACTION_SEND_START; |
| /* FALLTHRU */ |
| case MV64XXX_I2C_ACTION_SEND_START: |
| writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START, |
| drv_data->reg_base + drv_data->reg_offsets.control); |
| break; |
| |
| case MV64XXX_I2C_ACTION_SEND_ADDR_1: |
| writel(drv_data->addr1, |
| drv_data->reg_base + drv_data->reg_offsets.data); |
| writel(drv_data->cntl_bits, |
| drv_data->reg_base + drv_data->reg_offsets.control); |
| break; |
| |
| case MV64XXX_I2C_ACTION_SEND_ADDR_2: |
| writel(drv_data->addr2, |
| drv_data->reg_base + drv_data->reg_offsets.data); |
| writel(drv_data->cntl_bits, |
| drv_data->reg_base + drv_data->reg_offsets.control); |
| break; |
| |
| case MV64XXX_I2C_ACTION_SEND_DATA: |
| writel(drv_data->msg->buf[drv_data->byte_posn++], |
| drv_data->reg_base + drv_data->reg_offsets.data); |
| writel(drv_data->cntl_bits, |
| drv_data->reg_base + drv_data->reg_offsets.control); |
| break; |
| |
| case MV64XXX_I2C_ACTION_RCV_DATA: |
| drv_data->msg->buf[drv_data->byte_posn++] = |
| readl(drv_data->reg_base + drv_data->reg_offsets.data); |
| writel(drv_data->cntl_bits, |
| drv_data->reg_base + drv_data->reg_offsets.control); |
| break; |
| |
| case MV64XXX_I2C_ACTION_RCV_DATA_STOP: |
| drv_data->msg->buf[drv_data->byte_posn++] = |
| readl(drv_data->reg_base + drv_data->reg_offsets.data); |
| drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN; |
| writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP, |
| drv_data->reg_base + drv_data->reg_offsets.control); |
| drv_data->block = 0; |
| if (drv_data->errata_delay) |
| udelay(5); |
| |
| wake_up(&drv_data->waitq); |
| break; |
| |
| case MV64XXX_I2C_ACTION_INVALID: |
| default: |
| dev_err(&drv_data->adapter.dev, |
| "mv64xxx_i2c_do_action: Invalid action: %d\n", |
| drv_data->action); |
| drv_data->rc = -EIO; |
| |
| /* FALLTHRU */ |
| case MV64XXX_I2C_ACTION_SEND_STOP: |
| drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN; |
| writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP, |
| drv_data->reg_base + drv_data->reg_offsets.control); |
| drv_data->block = 0; |
| wake_up(&drv_data->waitq); |
| break; |
| |
| case MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP: |
| mv64xxx_i2c_update_offload_data(drv_data); |
| writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL); |
| writel(0, drv_data->reg_base + |
| MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE); |
| drv_data->block = 0; |
| wake_up(&drv_data->waitq); |
| break; |
| } |
| } |
| |
| static irqreturn_t |
| mv64xxx_i2c_intr(int irq, void *dev_id) |
| { |
| struct mv64xxx_i2c_data *drv_data = dev_id; |
| unsigned long flags; |
| u32 status; |
| irqreturn_t rc = IRQ_NONE; |
| |
| spin_lock_irqsave(&drv_data->lock, flags); |
| |
| if (drv_data->offload_enabled) { |
| while (readl(drv_data->reg_base + |
| MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE)) { |
| int reg_status = readl(drv_data->reg_base + |
| MV64XXX_I2C_REG_BRIDGE_STATUS); |
| if (reg_status & MV64XXX_I2C_BRIDGE_STATUS_ERROR) |
| status = MV64XXX_I2C_STATUS_OFFLOAD_ERROR; |
| else |
| status = MV64XXX_I2C_STATUS_OFFLOAD_OK; |
| mv64xxx_i2c_fsm(drv_data, status); |
| mv64xxx_i2c_do_action(drv_data); |
| rc = IRQ_HANDLED; |
| } |
| } |
| while (readl(drv_data->reg_base + drv_data->reg_offsets.control) & |
| MV64XXX_I2C_REG_CONTROL_IFLG) { |
| status = readl(drv_data->reg_base + drv_data->reg_offsets.status); |
| mv64xxx_i2c_fsm(drv_data, status); |
| mv64xxx_i2c_do_action(drv_data); |
| rc = IRQ_HANDLED; |
| } |
| spin_unlock_irqrestore(&drv_data->lock, flags); |
| |
| return rc; |
| } |
| |
| /* |
| ***************************************************************************** |
| * |
| * I2C Msg Execution Routines |
| * |
| ***************************************************************************** |
| */ |
| static void |
| mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data) |
| { |
| long time_left; |
| unsigned long flags; |
| char abort = 0; |
| |
| time_left = wait_event_timeout(drv_data->waitq, |
| !drv_data->block, drv_data->adapter.timeout); |
| |
| spin_lock_irqsave(&drv_data->lock, flags); |
| if (!time_left) { /* Timed out */ |
| drv_data->rc = -ETIMEDOUT; |
| abort = 1; |
| } else if (time_left < 0) { /* Interrupted/Error */ |
| drv_data->rc = time_left; /* errno value */ |
| abort = 1; |
| } |
| |
| if (abort && drv_data->block) { |
| drv_data->aborting = 1; |
| spin_unlock_irqrestore(&drv_data->lock, flags); |
| |
| time_left = wait_event_timeout(drv_data->waitq, |
| !drv_data->block, drv_data->adapter.timeout); |
| |
| if ((time_left <= 0) && drv_data->block) { |
| drv_data->state = MV64XXX_I2C_STATE_IDLE; |
| dev_err(&drv_data->adapter.dev, |
| "mv64xxx: I2C bus locked, block: %d, " |
| "time_left: %d\n", drv_data->block, |
| (int)time_left); |
| mv64xxx_i2c_hw_init(drv_data); |
| } |
| } else |
| spin_unlock_irqrestore(&drv_data->lock, flags); |
| } |
| |
| static int |
| mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg, |
| int is_last) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&drv_data->lock, flags); |
| if (drv_data->offload_enabled) { |
| drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_SEND_START; |
| drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND; |
| } else { |
| mv64xxx_i2c_prepare_for_io(drv_data, msg); |
| |
| drv_data->action = MV64XXX_I2C_ACTION_SEND_START; |
| drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND; |
| } |
| drv_data->send_stop = is_last; |
| drv_data->block = 1; |
| mv64xxx_i2c_do_action(drv_data); |
| spin_unlock_irqrestore(&drv_data->lock, flags); |
| |
| mv64xxx_i2c_wait_for_completion(drv_data); |
| return drv_data->rc; |
| } |
| |
| /* |
| ***************************************************************************** |
| * |
| * I2C Core Support Routines (Interface to higher level I2C code) |
| * |
| ***************************************************************************** |
| */ |
| static u32 |
| mv64xxx_i2c_functionality(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static int |
| mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) |
| { |
| struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap); |
| int rc, ret = num; |
| |
| BUG_ON(drv_data->msgs != NULL); |
| drv_data->msgs = msgs; |
| drv_data->num_msgs = num; |
| |
| rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[0], num == 1); |
| if (rc < 0) |
| ret = rc; |
| |
| drv_data->num_msgs = 0; |
| drv_data->msgs = NULL; |
| |
| return ret; |
| } |
| |
| static const struct i2c_algorithm mv64xxx_i2c_algo = { |
| .master_xfer = mv64xxx_i2c_xfer, |
| .functionality = mv64xxx_i2c_functionality, |
| }; |
| |
| /* |
| ***************************************************************************** |
| * |
| * Driver Interface & Early Init Routines |
| * |
| ***************************************************************************** |
| */ |
| static const struct of_device_id mv64xxx_i2c_of_match_table[] = { |
| { .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i}, |
| { .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx}, |
| { .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table); |
| |
| #ifdef CONFIG_OF |
| #ifdef CONFIG_HAVE_CLK |
| static int |
| mv64xxx_calc_freq(const int tclk, const int n, const int m) |
| { |
| return tclk / (10 * (m + 1) * (2 << n)); |
| } |
| |
| static bool |
| mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n, |
| u32 *best_m) |
| { |
| int freq, delta, best_delta = INT_MAX; |
| int m, n; |
| |
| for (n = 0; n <= 7; n++) |
| for (m = 0; m <= 15; m++) { |
| freq = mv64xxx_calc_freq(tclk, n, m); |
| delta = req_freq - freq; |
| if (delta >= 0 && delta < best_delta) { |
| *best_m = m; |
| *best_n = n; |
| best_delta = delta; |
| } |
| if (best_delta == 0) |
| return true; |
| } |
| if (best_delta == INT_MAX) |
| return false; |
| return true; |
| } |
| #endif /* CONFIG_HAVE_CLK */ |
| |
| static int |
| mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, |
| struct device *dev) |
| { |
| /* CLK is mandatory when using DT to describe the i2c bus. We |
| * need to know tclk in order to calculate bus clock |
| * factors. |
| */ |
| #if !defined(CONFIG_HAVE_CLK) |
| /* Have OF but no CLK */ |
| return -ENODEV; |
| #else |
| const struct of_device_id *device; |
| struct device_node *np = dev->of_node; |
| u32 bus_freq, tclk; |
| int rc = 0; |
| |
| if (IS_ERR(drv_data->clk)) { |
| rc = -ENODEV; |
| goto out; |
| } |
| tclk = clk_get_rate(drv_data->clk); |
| |
| rc = of_property_read_u32(np, "clock-frequency", &bus_freq); |
| if (rc) |
| bus_freq = 100000; /* 100kHz by default */ |
| |
| if (!mv64xxx_find_baud_factors(bus_freq, tclk, |
| &drv_data->freq_n, &drv_data->freq_m)) { |
| rc = -EINVAL; |
| goto out; |
| } |
| drv_data->irq = irq_of_parse_and_map(np, 0); |
| |
| /* Its not yet defined how timeouts will be specified in device tree. |
| * So hard code the value to 1 second. |
| */ |
| drv_data->adapter.timeout = HZ; |
| |
| device = of_match_device(mv64xxx_i2c_of_match_table, dev); |
| if (!device) |
| return -ENODEV; |
| |
| memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets)); |
| |
| /* |
| * For controllers embedded in new SoCs activate the |
| * Transaction Generator support and the errata fix. |
| */ |
| if (of_device_is_compatible(np, "marvell,mv78230-i2c")) { |
| drv_data->offload_enabled = true; |
| drv_data->errata_delay = true; |
| } |
| |
| out: |
| return rc; |
| #endif |
| } |
| #else /* CONFIG_OF */ |
| static int |
| mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, |
| struct device *dev) |
| { |
| return -ENODEV; |
| } |
| #endif /* CONFIG_OF */ |
| |
| static int |
| mv64xxx_i2c_probe(struct platform_device *pd) |
| { |
| struct mv64xxx_i2c_data *drv_data; |
| struct mv64xxx_i2c_pdata *pdata = dev_get_platdata(&pd->dev); |
| struct resource *r; |
| int rc; |
| |
| if ((!pdata && !pd->dev.of_node)) |
| return -ENODEV; |
| |
| drv_data = devm_kzalloc(&pd->dev, sizeof(struct mv64xxx_i2c_data), |
| GFP_KERNEL); |
| if (!drv_data) |
| return -ENOMEM; |
| |
| r = platform_get_resource(pd, IORESOURCE_MEM, 0); |
| drv_data->reg_base = devm_ioremap_resource(&pd->dev, r); |
| if (IS_ERR(drv_data->reg_base)) |
| return PTR_ERR(drv_data->reg_base); |
| |
| strlcpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter", |
| sizeof(drv_data->adapter.name)); |
| |
| init_waitqueue_head(&drv_data->waitq); |
| spin_lock_init(&drv_data->lock); |
| |
| #if defined(CONFIG_HAVE_CLK) |
| /* Not all platforms have a clk */ |
| drv_data->clk = devm_clk_get(&pd->dev, NULL); |
| if (!IS_ERR(drv_data->clk)) { |
| clk_prepare(drv_data->clk); |
| clk_enable(drv_data->clk); |
| } |
| #endif |
| if (pdata) { |
| drv_data->freq_m = pdata->freq_m; |
| drv_data->freq_n = pdata->freq_n; |
| drv_data->irq = platform_get_irq(pd, 0); |
| drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout); |
| drv_data->offload_enabled = false; |
| memcpy(&drv_data->reg_offsets, &mv64xxx_i2c_regs_mv64xxx, sizeof(drv_data->reg_offsets)); |
| } else if (pd->dev.of_node) { |
| rc = mv64xxx_of_config(drv_data, &pd->dev); |
| if (rc) |
| goto exit_clk; |
| } |
| if (drv_data->irq < 0) { |
| rc = -ENXIO; |
| goto exit_clk; |
| } |
| |
| drv_data->adapter.dev.parent = &pd->dev; |
| drv_data->adapter.algo = &mv64xxx_i2c_algo; |
| drv_data->adapter.owner = THIS_MODULE; |
| drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; |
| drv_data->adapter.nr = pd->id; |
| drv_data->adapter.dev.of_node = pd->dev.of_node; |
| platform_set_drvdata(pd, drv_data); |
| i2c_set_adapdata(&drv_data->adapter, drv_data); |
| |
| mv64xxx_i2c_hw_init(drv_data); |
| |
| rc = request_irq(drv_data->irq, mv64xxx_i2c_intr, 0, |
| MV64XXX_I2C_CTLR_NAME, drv_data); |
| if (rc) { |
| dev_err(&drv_data->adapter.dev, |
| "mv64xxx: Can't register intr handler irq%d: %d\n", |
| drv_data->irq, rc); |
| goto exit_clk; |
| } else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) { |
| dev_err(&drv_data->adapter.dev, |
| "mv64xxx: Can't add i2c adapter, rc: %d\n", -rc); |
| goto exit_free_irq; |
| } |
| |
| return 0; |
| |
| exit_free_irq: |
| free_irq(drv_data->irq, drv_data); |
| exit_clk: |
| #if defined(CONFIG_HAVE_CLK) |
| /* Not all platforms have a clk */ |
| if (!IS_ERR(drv_data->clk)) { |
| clk_disable(drv_data->clk); |
| clk_unprepare(drv_data->clk); |
| } |
| #endif |
| return rc; |
| } |
| |
| static int |
| mv64xxx_i2c_remove(struct platform_device *dev) |
| { |
| struct mv64xxx_i2c_data *drv_data = platform_get_drvdata(dev); |
| |
| i2c_del_adapter(&drv_data->adapter); |
| free_irq(drv_data->irq, drv_data); |
| #if defined(CONFIG_HAVE_CLK) |
| /* Not all platforms have a clk */ |
| if (!IS_ERR(drv_data->clk)) { |
| clk_disable(drv_data->clk); |
| clk_unprepare(drv_data->clk); |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| static struct platform_driver mv64xxx_i2c_driver = { |
| .probe = mv64xxx_i2c_probe, |
| .remove = mv64xxx_i2c_remove, |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = MV64XXX_I2C_CTLR_NAME, |
| .of_match_table = of_match_ptr(mv64xxx_i2c_of_match_table), |
| }, |
| }; |
| |
| module_platform_driver(mv64xxx_i2c_driver); |
| |
| MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>"); |
| MODULE_DESCRIPTION("Marvell mv64xxx host bridge i2c ctlr driver"); |
| MODULE_LICENSE("GPL"); |