hwmon: (pmbus) Add client driver for LTC3815
LTC3815 is a Monolithic Synchronous DC/DC Step-Down Converter.
Cc: Michael Jones <mike@proclivis.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
diff --git a/Documentation/hwmon/ltc3815 b/Documentation/hwmon/ltc3815
new file mode 100644
index 0000000..eb7db2d
--- /dev/null
+++ b/Documentation/hwmon/ltc3815
@@ -0,0 +1,61 @@
+Kernel driver ltc3815
+=====================
+
+Supported chips:
+ * Linear Technology LTC3815
+ Prefix: 'ltc3815'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltc3815
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+LTC3815 is a Monolithic Synchronous DC/DC Step-Down Converter.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Example: the following commands will load the driver for an LTC3815
+at address 0x20 on I2C bus #1:
+
+# modprobe ltc3815
+# echo ltc3815 0x20 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs attributes
+----------------
+
+in1_label "vin"
+in1_input Measured input voltage.
+in1_alarm Input voltage alarm.
+in1_highest Highest input voltage.
+in1_reset_history Reset input voltage history.
+
+in2_label "vout1".
+in2_input Measured output voltage.
+in2_alarm Output voltage alarm.
+in2_highest Highest output voltage.
+in2_reset_history Reset output voltage history.
+
+temp1_input Measured chip temperature.
+temp1_alarm Temperature alarm.
+temp1_highest Highest measured temperature.
+temp1_reset_history Reset temperature history.
+
+curr1_label "iin".
+curr1_input Measured input current.
+curr1_highest Highest input current.
+curr1_reset_history Reset input current history.
+
+curr2_label "iout1".
+curr2_input Measured output current.
+curr2_alarm Output current alarm.
+curr2_highest Highest output current.
+curr2_reset_history Reset output current history.