| /* linux/arch/arm/mach-s3c2410/s3c2442-clock.c |
| * |
| * Copyright (c) 2004-2005 Simtec Electronics |
| * http://armlinux.simtec.co.uk/ |
| * Ben Dooks <ben@simtec.co.uk> |
| * |
| * S3C2442 Clock support |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/errno.h> |
| #include <linux/err.h> |
| #include <linux/device.h> |
| #include <linux/sysdev.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/mutex.h> |
| #include <linux/clk.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/atomic.h> |
| #include <asm/irq.h> |
| #include <asm/io.h> |
| |
| #include <asm/arch/regs-clock.h> |
| |
| #include "clock.h" |
| #include "cpu.h" |
| |
| /* S3C2442 extended clock support */ |
| |
| static unsigned long s3c2442_camif_upll_round(struct clk *clk, |
| unsigned long rate) |
| { |
| unsigned long parent_rate = clk_get_rate(clk->parent); |
| int div; |
| |
| if (rate > parent_rate) |
| return parent_rate; |
| |
| div = parent_rate / rate; |
| |
| if (div == 3) |
| return parent_rate / 3; |
| |
| /* note, we remove the +/- 1 calculations for the divisor */ |
| |
| div /= 2; |
| |
| if (div < 1) |
| div = 1; |
| else if (div > 16) |
| div = 16; |
| |
| return parent_rate / (div * 2); |
| } |
| |
| static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate) |
| { |
| unsigned long parent_rate = clk_get_rate(clk->parent); |
| unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); |
| |
| rate = s3c2442_camif_upll_round(clk, rate); |
| |
| camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3; |
| |
| if (rate == parent_rate) { |
| camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL; |
| } else if ((parent_rate / rate) == 3) { |
| camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; |
| camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3; |
| } else { |
| camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK; |
| camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; |
| camdivn |= (((parent_rate / rate) / 2) - 1); |
| } |
| |
| __raw_writel(camdivn, S3C2440_CAMDIVN); |
| |
| return 0; |
| } |
| |
| /* Extra S3C2442 clocks */ |
| |
| static struct clk s3c2442_clk_cam = { |
| .name = "camif", |
| .id = -1, |
| .enable = s3c2410_clkcon_enable, |
| .ctrlbit = S3C2440_CLKCON_CAMERA, |
| }; |
| |
| static struct clk s3c2442_clk_cam_upll = { |
| .name = "camif-upll", |
| .id = -1, |
| .set_rate = s3c2442_camif_upll_setrate, |
| .round_rate = s3c2442_camif_upll_round, |
| }; |
| |
| static int s3c2442_clk_add(struct sys_device *sysdev) |
| { |
| unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); |
| unsigned long clkdivn; |
| struct clk *clock_h; |
| struct clk *clock_p; |
| struct clk *clock_upll; |
| |
| printk("S3C2442: Clock Support, DVS %s\n", |
| (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); |
| |
| clock_p = clk_get(NULL, "pclk"); |
| clock_h = clk_get(NULL, "hclk"); |
| clock_upll = clk_get(NULL, "upll"); |
| |
| if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { |
| printk(KERN_ERR "S3C2442: Failed to get parent clocks\n"); |
| return -EINVAL; |
| } |
| |
| /* check rate of UPLL, and if it is near 96MHz, then change |
| * to using half the UPLL rate for the system */ |
| |
| if (clk_get_rate(clock_upll) > (94 * MHZ)) { |
| clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; |
| |
| mutex_lock(&clocks_mutex); |
| |
| clkdivn = __raw_readl(S3C2410_CLKDIVN); |
| clkdivn |= S3C2440_CLKDIVN_UCLK; |
| __raw_writel(clkdivn, S3C2410_CLKDIVN); |
| |
| mutex_unlock(&clocks_mutex); |
| } |
| |
| s3c2442_clk_cam.parent = clock_h; |
| s3c2442_clk_cam_upll.parent = clock_upll; |
| |
| s3c24xx_register_clock(&s3c2442_clk_cam); |
| s3c24xx_register_clock(&s3c2442_clk_cam_upll); |
| |
| clk_disable(&s3c2442_clk_cam); |
| |
| return 0; |
| } |
| |
| static struct sysdev_driver s3c2442_clk_driver = { |
| .add = s3c2442_clk_add, |
| }; |
| |
| static __init int s3c2442_clk_init(void) |
| { |
| return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver); |
| } |
| |
| arch_initcall(s3c2442_clk_init); |