| /* |
| * Exynos specific support for Samsung pinctrl/gpiolib driver with eint support. |
| * |
| * Copyright (c) 2012 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * Copyright (c) 2012 Linaro Ltd |
| * http://www.linaro.org |
| * |
| * Author: Thomas Abraham <thomas.ab@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This file contains the Samsung Exynos specific information required by the |
| * the Samsung pinctrl/gpiolib driver. It also includes the implementation of |
| * external gpio and wakeup interrupt support. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/interrupt.h> |
| #include <linux/irqdomain.h> |
| #include <linux/irq.h> |
| #include <linux/irqchip/chained_irq.h> |
| #include <linux/of_irq.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/err.h> |
| |
| #include "pinctrl-samsung.h" |
| #include "pinctrl-exynos.h" |
| |
| |
| static struct samsung_pin_bank_type bank_type_off = { |
| .fld_width = { 4, 1, 2, 2, 2, 2, }, |
| .reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, }, |
| }; |
| |
| static struct samsung_pin_bank_type bank_type_alive = { |
| .fld_width = { 4, 1, 2, 2, }, |
| .reg_offset = { 0x00, 0x04, 0x08, 0x0c, }, |
| }; |
| |
| /* list of external wakeup controllers supported */ |
| static const struct of_device_id exynos_wkup_irq_ids[] = { |
| { .compatible = "samsung,exynos4210-wakeup-eint", }, |
| { } |
| }; |
| |
| static void exynos_gpio_irq_unmask(struct irq_data *irqd) |
| { |
| struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); |
| struct samsung_pinctrl_drv_data *d = bank->drvdata; |
| unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset; |
| unsigned long mask; |
| |
| mask = readl(d->virt_base + reg_mask); |
| mask &= ~(1 << irqd->hwirq); |
| writel(mask, d->virt_base + reg_mask); |
| } |
| |
| static void exynos_gpio_irq_mask(struct irq_data *irqd) |
| { |
| struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); |
| struct samsung_pinctrl_drv_data *d = bank->drvdata; |
| unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset; |
| unsigned long mask; |
| |
| mask = readl(d->virt_base + reg_mask); |
| mask |= 1 << irqd->hwirq; |
| writel(mask, d->virt_base + reg_mask); |
| } |
| |
| static void exynos_gpio_irq_ack(struct irq_data *irqd) |
| { |
| struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); |
| struct samsung_pinctrl_drv_data *d = bank->drvdata; |
| unsigned long reg_pend = d->ctrl->geint_pend + bank->eint_offset; |
| |
| writel(1 << irqd->hwirq, d->virt_base + reg_pend); |
| } |
| |
| static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) |
| { |
| struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); |
| struct samsung_pin_bank_type *bank_type = bank->type; |
| struct samsung_pinctrl_drv_data *d = bank->drvdata; |
| struct samsung_pin_ctrl *ctrl = d->ctrl; |
| unsigned int pin = irqd->hwirq; |
| unsigned int shift = EXYNOS_EINT_CON_LEN * pin; |
| unsigned int con, trig_type; |
| unsigned long reg_con = ctrl->geint_con + bank->eint_offset; |
| unsigned long flags; |
| unsigned int mask; |
| |
| switch (type) { |
| case IRQ_TYPE_EDGE_RISING: |
| trig_type = EXYNOS_EINT_EDGE_RISING; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| trig_type = EXYNOS_EINT_EDGE_FALLING; |
| break; |
| case IRQ_TYPE_EDGE_BOTH: |
| trig_type = EXYNOS_EINT_EDGE_BOTH; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| trig_type = EXYNOS_EINT_LEVEL_HIGH; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| trig_type = EXYNOS_EINT_LEVEL_LOW; |
| break; |
| default: |
| pr_err("unsupported external interrupt type\n"); |
| return -EINVAL; |
| } |
| |
| if (type & IRQ_TYPE_EDGE_BOTH) |
| __irq_set_handler_locked(irqd->irq, handle_edge_irq); |
| else |
| __irq_set_handler_locked(irqd->irq, handle_level_irq); |
| |
| con = readl(d->virt_base + reg_con); |
| con &= ~(EXYNOS_EINT_CON_MASK << shift); |
| con |= trig_type << shift; |
| writel(con, d->virt_base + reg_con); |
| |
| reg_con = bank->pctl_offset + bank_type->reg_offset[PINCFG_TYPE_FUNC]; |
| shift = pin * bank_type->fld_width[PINCFG_TYPE_FUNC]; |
| mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1; |
| |
| spin_lock_irqsave(&bank->slock, flags); |
| |
| con = readl(d->virt_base + reg_con); |
| con &= ~(mask << shift); |
| con |= EXYNOS_EINT_FUNC << shift; |
| writel(con, d->virt_base + reg_con); |
| |
| spin_unlock_irqrestore(&bank->slock, flags); |
| |
| return 0; |
| } |
| |
| /* |
| * irq_chip for gpio interrupts. |
| */ |
| static struct irq_chip exynos_gpio_irq_chip = { |
| .name = "exynos_gpio_irq_chip", |
| .irq_unmask = exynos_gpio_irq_unmask, |
| .irq_mask = exynos_gpio_irq_mask, |
| .irq_ack = exynos_gpio_irq_ack, |
| .irq_set_type = exynos_gpio_irq_set_type, |
| }; |
| |
| static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq, |
| irq_hw_number_t hw) |
| { |
| struct samsung_pin_bank *b = h->host_data; |
| |
| irq_set_chip_data(virq, b); |
| irq_set_chip_and_handler(virq, &exynos_gpio_irq_chip, |
| handle_level_irq); |
| set_irq_flags(virq, IRQF_VALID); |
| return 0; |
| } |
| |
| /* |
| * irq domain callbacks for external gpio interrupt controller. |
| */ |
| static const struct irq_domain_ops exynos_gpio_irqd_ops = { |
| .map = exynos_gpio_irq_map, |
| .xlate = irq_domain_xlate_twocell, |
| }; |
| |
| static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) |
| { |
| struct samsung_pinctrl_drv_data *d = data; |
| struct samsung_pin_ctrl *ctrl = d->ctrl; |
| struct samsung_pin_bank *bank = ctrl->pin_banks; |
| unsigned int svc, group, pin, virq; |
| |
| svc = readl(d->virt_base + ctrl->svc); |
| group = EXYNOS_SVC_GROUP(svc); |
| pin = svc & EXYNOS_SVC_NUM_MASK; |
| |
| if (!group) |
| return IRQ_HANDLED; |
| bank += (group - 1); |
| |
| virq = irq_linear_revmap(bank->irq_domain, pin); |
| if (!virq) |
| return IRQ_NONE; |
| generic_handle_irq(virq); |
| return IRQ_HANDLED; |
| } |
| |
| struct exynos_eint_gpio_save { |
| u32 eint_con; |
| u32 eint_fltcon0; |
| u32 eint_fltcon1; |
| }; |
| |
| /* |
| * exynos_eint_gpio_init() - setup handling of external gpio interrupts. |
| * @d: driver data of samsung pinctrl driver. |
| */ |
| static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) |
| { |
| struct samsung_pin_bank *bank; |
| struct device *dev = d->dev; |
| int ret; |
| int i; |
| |
| if (!d->irq) { |
| dev_err(dev, "irq number not available\n"); |
| return -EINVAL; |
| } |
| |
| ret = devm_request_irq(dev, d->irq, exynos_eint_gpio_irq, |
| 0, dev_name(dev), d); |
| if (ret) { |
| dev_err(dev, "irq request failed\n"); |
| return -ENXIO; |
| } |
| |
| bank = d->ctrl->pin_banks; |
| for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { |
| if (bank->eint_type != EINT_TYPE_GPIO) |
| continue; |
| bank->irq_domain = irq_domain_add_linear(bank->of_node, |
| bank->nr_pins, &exynos_gpio_irqd_ops, bank); |
| if (!bank->irq_domain) { |
| dev_err(dev, "gpio irq domain add failed\n"); |
| ret = -ENXIO; |
| goto err_domains; |
| } |
| |
| bank->soc_priv = devm_kzalloc(d->dev, |
| sizeof(struct exynos_eint_gpio_save), GFP_KERNEL); |
| if (!bank->soc_priv) { |
| irq_domain_remove(bank->irq_domain); |
| ret = -ENOMEM; |
| goto err_domains; |
| } |
| } |
| |
| return 0; |
| |
| err_domains: |
| for (--i, --bank; i >= 0; --i, --bank) { |
| if (bank->eint_type != EINT_TYPE_GPIO) |
| continue; |
| irq_domain_remove(bank->irq_domain); |
| } |
| |
| return ret; |
| } |
| |
| static void exynos_wkup_irq_unmask(struct irq_data *irqd) |
| { |
| struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); |
| struct samsung_pinctrl_drv_data *d = b->drvdata; |
| unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset; |
| unsigned long mask; |
| |
| mask = readl(d->virt_base + reg_mask); |
| mask &= ~(1 << irqd->hwirq); |
| writel(mask, d->virt_base + reg_mask); |
| } |
| |
| static void exynos_wkup_irq_mask(struct irq_data *irqd) |
| { |
| struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); |
| struct samsung_pinctrl_drv_data *d = b->drvdata; |
| unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset; |
| unsigned long mask; |
| |
| mask = readl(d->virt_base + reg_mask); |
| mask |= 1 << irqd->hwirq; |
| writel(mask, d->virt_base + reg_mask); |
| } |
| |
| static void exynos_wkup_irq_ack(struct irq_data *irqd) |
| { |
| struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); |
| struct samsung_pinctrl_drv_data *d = b->drvdata; |
| unsigned long pend = d->ctrl->weint_pend + b->eint_offset; |
| |
| writel(1 << irqd->hwirq, d->virt_base + pend); |
| } |
| |
| static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) |
| { |
| struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); |
| struct samsung_pin_bank_type *bank_type = bank->type; |
| struct samsung_pinctrl_drv_data *d = bank->drvdata; |
| unsigned int pin = irqd->hwirq; |
| unsigned long reg_con = d->ctrl->weint_con + bank->eint_offset; |
| unsigned long shift = EXYNOS_EINT_CON_LEN * pin; |
| unsigned long con, trig_type; |
| unsigned long flags; |
| unsigned int mask; |
| |
| switch (type) { |
| case IRQ_TYPE_EDGE_RISING: |
| trig_type = EXYNOS_EINT_EDGE_RISING; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| trig_type = EXYNOS_EINT_EDGE_FALLING; |
| break; |
| case IRQ_TYPE_EDGE_BOTH: |
| trig_type = EXYNOS_EINT_EDGE_BOTH; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| trig_type = EXYNOS_EINT_LEVEL_HIGH; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| trig_type = EXYNOS_EINT_LEVEL_LOW; |
| break; |
| default: |
| pr_err("unsupported external interrupt type\n"); |
| return -EINVAL; |
| } |
| |
| if (type & IRQ_TYPE_EDGE_BOTH) |
| __irq_set_handler_locked(irqd->irq, handle_edge_irq); |
| else |
| __irq_set_handler_locked(irqd->irq, handle_level_irq); |
| |
| con = readl(d->virt_base + reg_con); |
| con &= ~(EXYNOS_EINT_CON_MASK << shift); |
| con |= trig_type << shift; |
| writel(con, d->virt_base + reg_con); |
| |
| reg_con = bank->pctl_offset + bank_type->reg_offset[PINCFG_TYPE_FUNC]; |
| shift = pin * bank_type->fld_width[PINCFG_TYPE_FUNC]; |
| mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1; |
| |
| spin_lock_irqsave(&bank->slock, flags); |
| |
| con = readl(d->virt_base + reg_con); |
| con &= ~(mask << shift); |
| con |= EXYNOS_EINT_FUNC << shift; |
| writel(con, d->virt_base + reg_con); |
| |
| spin_unlock_irqrestore(&bank->slock, flags); |
| |
| return 0; |
| } |
| |
| static u32 exynos_eint_wake_mask = 0xffffffff; |
| |
| u32 exynos_get_eint_wake_mask(void) |
| { |
| return exynos_eint_wake_mask; |
| } |
| |
| static int exynos_wkup_irq_set_wake(struct irq_data *irqd, unsigned int on) |
| { |
| struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); |
| unsigned long bit = 1UL << (2 * bank->eint_offset + irqd->hwirq); |
| |
| pr_info("wake %s for irq %d\n", on ? "enabled" : "disabled", irqd->irq); |
| |
| if (!on) |
| exynos_eint_wake_mask |= bit; |
| else |
| exynos_eint_wake_mask &= ~bit; |
| |
| return 0; |
| } |
| |
| /* |
| * irq_chip for wakeup interrupts |
| */ |
| static struct irq_chip exynos_wkup_irq_chip = { |
| .name = "exynos_wkup_irq_chip", |
| .irq_unmask = exynos_wkup_irq_unmask, |
| .irq_mask = exynos_wkup_irq_mask, |
| .irq_ack = exynos_wkup_irq_ack, |
| .irq_set_type = exynos_wkup_irq_set_type, |
| .irq_set_wake = exynos_wkup_irq_set_wake, |
| }; |
| |
| /* interrupt handler for wakeup interrupts 0..15 */ |
| static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) |
| { |
| struct exynos_weint_data *eintd = irq_get_handler_data(irq); |
| struct samsung_pin_bank *bank = eintd->bank; |
| struct irq_chip *chip = irq_get_chip(irq); |
| int eint_irq; |
| |
| chained_irq_enter(chip, desc); |
| chip->irq_mask(&desc->irq_data); |
| |
| if (chip->irq_ack) |
| chip->irq_ack(&desc->irq_data); |
| |
| eint_irq = irq_linear_revmap(bank->irq_domain, eintd->irq); |
| generic_handle_irq(eint_irq); |
| chip->irq_unmask(&desc->irq_data); |
| chained_irq_exit(chip, desc); |
| } |
| |
| static inline void exynos_irq_demux_eint(unsigned long pend, |
| struct irq_domain *domain) |
| { |
| unsigned int irq; |
| |
| while (pend) { |
| irq = fls(pend) - 1; |
| generic_handle_irq(irq_find_mapping(domain, irq)); |
| pend &= ~(1 << irq); |
| } |
| } |
| |
| /* interrupt handler for wakeup interrupt 16 */ |
| static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) |
| { |
| struct irq_chip *chip = irq_get_chip(irq); |
| struct exynos_muxed_weint_data *eintd = irq_get_handler_data(irq); |
| struct samsung_pinctrl_drv_data *d = eintd->banks[0]->drvdata; |
| struct samsung_pin_ctrl *ctrl = d->ctrl; |
| unsigned long pend; |
| unsigned long mask; |
| int i; |
| |
| chained_irq_enter(chip, desc); |
| |
| for (i = 0; i < eintd->nr_banks; ++i) { |
| struct samsung_pin_bank *b = eintd->banks[i]; |
| pend = readl(d->virt_base + ctrl->weint_pend + b->eint_offset); |
| mask = readl(d->virt_base + ctrl->weint_mask + b->eint_offset); |
| exynos_irq_demux_eint(pend & ~mask, b->irq_domain); |
| } |
| |
| chained_irq_exit(chip, desc); |
| } |
| |
| static int exynos_wkup_irq_map(struct irq_domain *h, unsigned int virq, |
| irq_hw_number_t hw) |
| { |
| irq_set_chip_and_handler(virq, &exynos_wkup_irq_chip, handle_level_irq); |
| irq_set_chip_data(virq, h->host_data); |
| set_irq_flags(virq, IRQF_VALID); |
| return 0; |
| } |
| |
| /* |
| * irq domain callbacks for external wakeup interrupt controller. |
| */ |
| static const struct irq_domain_ops exynos_wkup_irqd_ops = { |
| .map = exynos_wkup_irq_map, |
| .xlate = irq_domain_xlate_twocell, |
| }; |
| |
| /* |
| * exynos_eint_wkup_init() - setup handling of external wakeup interrupts. |
| * @d: driver data of samsung pinctrl driver. |
| */ |
| static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) |
| { |
| struct device *dev = d->dev; |
| struct device_node *wkup_np = NULL; |
| struct device_node *np; |
| struct samsung_pin_bank *bank; |
| struct exynos_weint_data *weint_data; |
| struct exynos_muxed_weint_data *muxed_data; |
| unsigned int muxed_banks = 0; |
| unsigned int i; |
| int idx, irq; |
| |
| for_each_child_of_node(dev->of_node, np) { |
| if (of_match_node(exynos_wkup_irq_ids, np)) { |
| wkup_np = np; |
| break; |
| } |
| } |
| if (!wkup_np) |
| return -ENODEV; |
| |
| bank = d->ctrl->pin_banks; |
| for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { |
| if (bank->eint_type != EINT_TYPE_WKUP) |
| continue; |
| |
| bank->irq_domain = irq_domain_add_linear(bank->of_node, |
| bank->nr_pins, &exynos_wkup_irqd_ops, bank); |
| if (!bank->irq_domain) { |
| dev_err(dev, "wkup irq domain add failed\n"); |
| return -ENXIO; |
| } |
| |
| if (!of_find_property(bank->of_node, "interrupts", NULL)) { |
| bank->eint_type = EINT_TYPE_WKUP_MUX; |
| ++muxed_banks; |
| continue; |
| } |
| |
| weint_data = devm_kzalloc(dev, bank->nr_pins |
| * sizeof(*weint_data), GFP_KERNEL); |
| if (!weint_data) { |
| dev_err(dev, "could not allocate memory for weint_data\n"); |
| return -ENOMEM; |
| } |
| |
| for (idx = 0; idx < bank->nr_pins; ++idx) { |
| irq = irq_of_parse_and_map(bank->of_node, idx); |
| if (!irq) { |
| dev_err(dev, "irq number for eint-%s-%d not found\n", |
| bank->name, idx); |
| continue; |
| } |
| weint_data[idx].irq = idx; |
| weint_data[idx].bank = bank; |
| irq_set_handler_data(irq, &weint_data[idx]); |
| irq_set_chained_handler(irq, exynos_irq_eint0_15); |
| } |
| } |
| |
| if (!muxed_banks) |
| return 0; |
| |
| irq = irq_of_parse_and_map(wkup_np, 0); |
| if (!irq) { |
| dev_err(dev, "irq number for muxed EINTs not found\n"); |
| return 0; |
| } |
| |
| muxed_data = devm_kzalloc(dev, sizeof(*muxed_data) |
| + muxed_banks*sizeof(struct samsung_pin_bank *), GFP_KERNEL); |
| if (!muxed_data) { |
| dev_err(dev, "could not allocate memory for muxed_data\n"); |
| return -ENOMEM; |
| } |
| |
| irq_set_chained_handler(irq, exynos_irq_demux_eint16_31); |
| irq_set_handler_data(irq, muxed_data); |
| |
| bank = d->ctrl->pin_banks; |
| idx = 0; |
| for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { |
| if (bank->eint_type != EINT_TYPE_WKUP_MUX) |
| continue; |
| |
| muxed_data->banks[idx++] = bank; |
| } |
| muxed_data->nr_banks = muxed_banks; |
| |
| return 0; |
| } |
| |
| static void exynos_pinctrl_suspend_bank( |
| struct samsung_pinctrl_drv_data *drvdata, |
| struct samsung_pin_bank *bank) |
| { |
| struct exynos_eint_gpio_save *save = bank->soc_priv; |
| void __iomem *regs = drvdata->virt_base; |
| |
| save->eint_con = readl(regs + EXYNOS_GPIO_ECON_OFFSET |
| + bank->eint_offset); |
| save->eint_fltcon0 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET |
| + 2 * bank->eint_offset); |
| save->eint_fltcon1 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET |
| + 2 * bank->eint_offset + 4); |
| |
| pr_debug("%s: save con %#010x\n", bank->name, save->eint_con); |
| pr_debug("%s: save fltcon0 %#010x\n", bank->name, save->eint_fltcon0); |
| pr_debug("%s: save fltcon1 %#010x\n", bank->name, save->eint_fltcon1); |
| } |
| |
| static void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata) |
| { |
| struct samsung_pin_ctrl *ctrl = drvdata->ctrl; |
| struct samsung_pin_bank *bank = ctrl->pin_banks; |
| int i; |
| |
| for (i = 0; i < ctrl->nr_banks; ++i, ++bank) |
| if (bank->eint_type == EINT_TYPE_GPIO) |
| exynos_pinctrl_suspend_bank(drvdata, bank); |
| } |
| |
| static void exynos_pinctrl_resume_bank( |
| struct samsung_pinctrl_drv_data *drvdata, |
| struct samsung_pin_bank *bank) |
| { |
| struct exynos_eint_gpio_save *save = bank->soc_priv; |
| void __iomem *regs = drvdata->virt_base; |
| |
| pr_debug("%s: con %#010x => %#010x\n", bank->name, |
| readl(regs + EXYNOS_GPIO_ECON_OFFSET |
| + bank->eint_offset), save->eint_con); |
| pr_debug("%s: fltcon0 %#010x => %#010x\n", bank->name, |
| readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET |
| + 2 * bank->eint_offset), save->eint_fltcon0); |
| pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name, |
| readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET |
| + 2 * bank->eint_offset + 4), save->eint_fltcon1); |
| |
| writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET |
| + bank->eint_offset); |
| writel(save->eint_fltcon0, regs + EXYNOS_GPIO_EFLTCON_OFFSET |
| + 2 * bank->eint_offset); |
| writel(save->eint_fltcon1, regs + EXYNOS_GPIO_EFLTCON_OFFSET |
| + 2 * bank->eint_offset + 4); |
| } |
| |
| static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata) |
| { |
| struct samsung_pin_ctrl *ctrl = drvdata->ctrl; |
| struct samsung_pin_bank *bank = ctrl->pin_banks; |
| int i; |
| |
| for (i = 0; i < ctrl->nr_banks; ++i, ++bank) |
| if (bank->eint_type == EINT_TYPE_GPIO) |
| exynos_pinctrl_resume_bank(drvdata, bank); |
| } |
| |
| /* pin banks of exynos4210 pin-controller 0 */ |
| static struct samsung_pin_bank exynos4210_pin_banks0[] = { |
| EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), |
| EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), |
| EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), |
| EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c), |
| EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10), |
| EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14), |
| EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18), |
| EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0", 0x1c), |
| EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1", 0x20), |
| EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2", 0x24), |
| EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3", 0x28), |
| EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4", 0x2c), |
| EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30), |
| EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34), |
| EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38), |
| EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c), |
| }; |
| |
| /* pin banks of exynos4210 pin-controller 1 */ |
| static struct samsung_pin_bank exynos4210_pin_banks1[] = { |
| EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0", 0x00), |
| EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1", 0x04), |
| EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08), |
| EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c), |
| EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10), |
| EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14), |
| EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0", 0x18), |
| EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1", 0x1c), |
| EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20), |
| EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"), |
| EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"), |
| EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"), |
| EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"), |
| EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"), |
| EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"), |
| EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"), |
| EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), |
| EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04), |
| EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08), |
| EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c), |
| }; |
| |
| /* pin banks of exynos4210 pin-controller 2 */ |
| static struct samsung_pin_bank exynos4210_pin_banks2[] = { |
| EXYNOS_PIN_BANK_EINTN(7, 0x000, "gpz"), |
| }; |
| |
| /* |
| * Samsung pinctrl driver data for Exynos4210 SoC. Exynos4210 SoC includes |
| * three gpio/pin-mux/pinconfig controllers. |
| */ |
| struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { |
| { |
| /* pin-controller instance 0 data */ |
| .pin_banks = exynos4210_pin_banks0, |
| .nr_banks = ARRAY_SIZE(exynos4210_pin_banks0), |
| .geint_con = EXYNOS_GPIO_ECON_OFFSET, |
| .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, |
| .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, |
| .svc = EXYNOS_SVC_OFFSET, |
| .eint_gpio_init = exynos_eint_gpio_init, |
| .suspend = exynos_pinctrl_suspend, |
| .resume = exynos_pinctrl_resume, |
| .label = "exynos4210-gpio-ctrl0", |
| }, { |
| /* pin-controller instance 1 data */ |
| .pin_banks = exynos4210_pin_banks1, |
| .nr_banks = ARRAY_SIZE(exynos4210_pin_banks1), |
| .geint_con = EXYNOS_GPIO_ECON_OFFSET, |
| .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, |
| .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, |
| .weint_con = EXYNOS_WKUP_ECON_OFFSET, |
| .weint_mask = EXYNOS_WKUP_EMASK_OFFSET, |
| .weint_pend = EXYNOS_WKUP_EPEND_OFFSET, |
| .svc = EXYNOS_SVC_OFFSET, |
| .eint_gpio_init = exynos_eint_gpio_init, |
| .eint_wkup_init = exynos_eint_wkup_init, |
| .suspend = exynos_pinctrl_suspend, |
| .resume = exynos_pinctrl_resume, |
| .label = "exynos4210-gpio-ctrl1", |
| }, { |
| /* pin-controller instance 2 data */ |
| .pin_banks = exynos4210_pin_banks2, |
| .nr_banks = ARRAY_SIZE(exynos4210_pin_banks2), |
| .label = "exynos4210-gpio-ctrl2", |
| }, |
| }; |
| |
| /* pin banks of exynos4x12 pin-controller 0 */ |
| static struct samsung_pin_bank exynos4x12_pin_banks0[] = { |
| EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), |
| EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), |
| EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), |
| EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c), |
| EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10), |
| EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14), |
| EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18), |
| EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30), |
| EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34), |
| EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38), |
| EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c), |
| EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpj0", 0x40), |
| EXYNOS_PIN_BANK_EINTG(5, 0x260, "gpj1", 0x44), |
| }; |
| |
| /* pin banks of exynos4x12 pin-controller 1 */ |
| static struct samsung_pin_bank exynos4x12_pin_banks1[] = { |
| EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08), |
| EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c), |
| EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10), |
| EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14), |
| EXYNOS_PIN_BANK_EINTG(7, 0x0C0, "gpl0", 0x18), |
| EXYNOS_PIN_BANK_EINTG(2, 0x0E0, "gpl1", 0x1c), |
| EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20), |
| EXYNOS_PIN_BANK_EINTG(8, 0x260, "gpm0", 0x24), |
| EXYNOS_PIN_BANK_EINTG(7, 0x280, "gpm1", 0x28), |
| EXYNOS_PIN_BANK_EINTG(5, 0x2A0, "gpm2", 0x2c), |
| EXYNOS_PIN_BANK_EINTG(8, 0x2C0, "gpm3", 0x30), |
| EXYNOS_PIN_BANK_EINTG(8, 0x2E0, "gpm4", 0x34), |
| EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"), |
| EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"), |
| EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"), |
| EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"), |
| EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"), |
| EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"), |
| EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"), |
| EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), |
| EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04), |
| EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08), |
| EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c), |
| }; |
| |
| /* pin banks of exynos4x12 pin-controller 2 */ |
| static struct samsung_pin_bank exynos4x12_pin_banks2[] = { |
| EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00), |
| }; |
| |
| /* pin banks of exynos4x12 pin-controller 3 */ |
| static struct samsung_pin_bank exynos4x12_pin_banks3[] = { |
| EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00), |
| EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04), |
| EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpv2", 0x08), |
| EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv3", 0x0c), |
| EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpv4", 0x10), |
| }; |
| |
| /* |
| * Samsung pinctrl driver data for Exynos4x12 SoC. Exynos4x12 SoC includes |
| * four gpio/pin-mux/pinconfig controllers. |
| */ |
| struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { |
| { |
| /* pin-controller instance 0 data */ |
| .pin_banks = exynos4x12_pin_banks0, |
| .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks0), |
| .geint_con = EXYNOS_GPIO_ECON_OFFSET, |
| .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, |
| .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, |
| .svc = EXYNOS_SVC_OFFSET, |
| .eint_gpio_init = exynos_eint_gpio_init, |
| .suspend = exynos_pinctrl_suspend, |
| .resume = exynos_pinctrl_resume, |
| .label = "exynos4x12-gpio-ctrl0", |
| }, { |
| /* pin-controller instance 1 data */ |
| .pin_banks = exynos4x12_pin_banks1, |
| .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks1), |
| .geint_con = EXYNOS_GPIO_ECON_OFFSET, |
| .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, |
| .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, |
| .weint_con = EXYNOS_WKUP_ECON_OFFSET, |
| .weint_mask = EXYNOS_WKUP_EMASK_OFFSET, |
| .weint_pend = EXYNOS_WKUP_EPEND_OFFSET, |
| .svc = EXYNOS_SVC_OFFSET, |
| .eint_gpio_init = exynos_eint_gpio_init, |
| .eint_wkup_init = exynos_eint_wkup_init, |
| .suspend = exynos_pinctrl_suspend, |
| .resume = exynos_pinctrl_resume, |
| .label = "exynos4x12-gpio-ctrl1", |
| }, { |
| /* pin-controller instance 2 data */ |
| .pin_banks = exynos4x12_pin_banks2, |
| .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks2), |
| .geint_con = EXYNOS_GPIO_ECON_OFFSET, |
| .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, |
| .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, |
| .svc = EXYNOS_SVC_OFFSET, |
| .eint_gpio_init = exynos_eint_gpio_init, |
| .suspend = exynos_pinctrl_suspend, |
| .resume = exynos_pinctrl_resume, |
| .label = "exynos4x12-gpio-ctrl2", |
| }, { |
| /* pin-controller instance 3 data */ |
| .pin_banks = exynos4x12_pin_banks3, |
| .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks3), |
| .geint_con = EXYNOS_GPIO_ECON_OFFSET, |
| .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, |
| .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, |
| .svc = EXYNOS_SVC_OFFSET, |
| .eint_gpio_init = exynos_eint_gpio_init, |
| .suspend = exynos_pinctrl_suspend, |
| .resume = exynos_pinctrl_resume, |
| .label = "exynos4x12-gpio-ctrl3", |
| }, |
| }; |
| |
| /* pin banks of exynos5250 pin-controller 0 */ |
| static struct samsung_pin_bank exynos5250_pin_banks0[] = { |
| EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), |
| EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), |
| EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08), |
| EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c), |
| EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10), |
| EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14), |
| EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpb3", 0x18), |
| EXYNOS_PIN_BANK_EINTG(7, 0x0E0, "gpc0", 0x1c), |
| EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc1", 0x20), |
| EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc2", 0x24), |
| EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc3", 0x28), |
| EXYNOS_PIN_BANK_EINTG(4, 0x160, "gpd0", 0x2c), |
| EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x30), |
| EXYNOS_PIN_BANK_EINTG(7, 0x2E0, "gpc4", 0x34), |
| EXYNOS_PIN_BANK_EINTN(6, 0x1A0, "gpy0"), |
| EXYNOS_PIN_BANK_EINTN(4, 0x1C0, "gpy1"), |
| EXYNOS_PIN_BANK_EINTN(6, 0x1E0, "gpy2"), |
| EXYNOS_PIN_BANK_EINTN(8, 0x200, "gpy3"), |
| EXYNOS_PIN_BANK_EINTN(8, 0x220, "gpy4"), |
| EXYNOS_PIN_BANK_EINTN(8, 0x240, "gpy5"), |
| EXYNOS_PIN_BANK_EINTN(8, 0x260, "gpy6"), |
| EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), |
| EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04), |
| EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08), |
| EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c), |
| }; |
| |
| /* pin banks of exynos5250 pin-controller 1 */ |
| static struct samsung_pin_bank exynos5250_pin_banks1[] = { |
| EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00), |
| EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04), |
| EXYNOS_PIN_BANK_EINTG(4, 0x040, "gpf0", 0x08), |
| EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf1", 0x0c), |
| EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpg0", 0x10), |
| EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpg1", 0x14), |
| EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpg2", 0x18), |
| EXYNOS_PIN_BANK_EINTG(4, 0x0E0, "gph0", 0x1c), |
| EXYNOS_PIN_BANK_EINTG(8, 0x100, "gph1", 0x20), |
| }; |
| |
| /* pin banks of exynos5250 pin-controller 2 */ |
| static struct samsung_pin_bank exynos5250_pin_banks2[] = { |
| EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00), |
| EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04), |
| EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08), |
| EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpv3", 0x0c), |
| EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpv4", 0x10), |
| }; |
| |
| /* pin banks of exynos5250 pin-controller 3 */ |
| static struct samsung_pin_bank exynos5250_pin_banks3[] = { |
| EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00), |
| }; |
| |
| /* |
| * Samsung pinctrl driver data for Exynos5250 SoC. Exynos5250 SoC includes |
| * four gpio/pin-mux/pinconfig controllers. |
| */ |
| struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { |
| { |
| /* pin-controller instance 0 data */ |
| .pin_banks = exynos5250_pin_banks0, |
| .nr_banks = ARRAY_SIZE(exynos5250_pin_banks0), |
| .geint_con = EXYNOS_GPIO_ECON_OFFSET, |
| .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, |
| .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, |
| .weint_con = EXYNOS_WKUP_ECON_OFFSET, |
| .weint_mask = EXYNOS_WKUP_EMASK_OFFSET, |
| .weint_pend = EXYNOS_WKUP_EPEND_OFFSET, |
| .svc = EXYNOS_SVC_OFFSET, |
| .eint_gpio_init = exynos_eint_gpio_init, |
| .eint_wkup_init = exynos_eint_wkup_init, |
| .suspend = exynos_pinctrl_suspend, |
| .resume = exynos_pinctrl_resume, |
| .label = "exynos5250-gpio-ctrl0", |
| }, { |
| /* pin-controller instance 1 data */ |
| .pin_banks = exynos5250_pin_banks1, |
| .nr_banks = ARRAY_SIZE(exynos5250_pin_banks1), |
| .geint_con = EXYNOS_GPIO_ECON_OFFSET, |
| .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, |
| .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, |
| .svc = EXYNOS_SVC_OFFSET, |
| .eint_gpio_init = exynos_eint_gpio_init, |
| .suspend = exynos_pinctrl_suspend, |
| .resume = exynos_pinctrl_resume, |
| .label = "exynos5250-gpio-ctrl1", |
| }, { |
| /* pin-controller instance 2 data */ |
| .pin_banks = exynos5250_pin_banks2, |
| .nr_banks = ARRAY_SIZE(exynos5250_pin_banks2), |
| .geint_con = EXYNOS_GPIO_ECON_OFFSET, |
| .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, |
| .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, |
| .svc = EXYNOS_SVC_OFFSET, |
| .eint_gpio_init = exynos_eint_gpio_init, |
| .suspend = exynos_pinctrl_suspend, |
| .resume = exynos_pinctrl_resume, |
| .label = "exynos5250-gpio-ctrl2", |
| }, { |
| /* pin-controller instance 3 data */ |
| .pin_banks = exynos5250_pin_banks3, |
| .nr_banks = ARRAY_SIZE(exynos5250_pin_banks3), |
| .geint_con = EXYNOS_GPIO_ECON_OFFSET, |
| .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, |
| .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, |
| .svc = EXYNOS_SVC_OFFSET, |
| .eint_gpio_init = exynos_eint_gpio_init, |
| .suspend = exynos_pinctrl_suspend, |
| .resume = exynos_pinctrl_resume, |
| .label = "exynos5250-gpio-ctrl3", |
| }, |
| }; |