| /* orinoco_cs.c (formerly known as dldwd_cs.c) |
| * |
| * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such |
| * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ |
| * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others). |
| * It should also be usable on various Prism II based cards such as the |
| * Linksys, D-Link and Farallon Skyline. It should also work on Symbol |
| * cards such as the 3Com AirConnect and Ericsson WLAN. |
| * |
| * Copyright notice & release notes in file orinoco.c |
| */ |
| |
| #define DRIVER_NAME "orinoco_cs" |
| #define PFX DRIVER_NAME ": " |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/cs.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/cisreg.h> |
| #include <pcmcia/ds.h> |
| |
| #include "orinoco.h" |
| |
| /********************************************************************/ |
| /* Module stuff */ |
| /********************************************************************/ |
| |
| MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>"); |
| MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards"); |
| MODULE_LICENSE("Dual MPL/GPL"); |
| |
| /* Module parameters */ |
| |
| /* Some D-Link cards have buggy CIS. They do work at 5v properly, but |
| * don't have any CIS entry for it. This workaround it... */ |
| static int ignore_cis_vcc; /* = 0 */ |
| module_param(ignore_cis_vcc, int, 0); |
| MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket"); |
| |
| /********************************************************************/ |
| /* Data structures */ |
| /********************************************************************/ |
| |
| /* PCMCIA specific device information (goes in the card field of |
| * struct orinoco_private */ |
| struct orinoco_pccard { |
| struct pcmcia_device *p_dev; |
| dev_node_t node; |
| |
| /* Used to handle hard reset */ |
| /* yuck, we need this hack to work around the insanity of the |
| * PCMCIA layer */ |
| unsigned long hard_reset_in_progress; |
| }; |
| |
| |
| /********************************************************************/ |
| /* Function prototypes */ |
| /********************************************************************/ |
| |
| static int orinoco_cs_config(struct pcmcia_device *link); |
| static void orinoco_cs_release(struct pcmcia_device *link); |
| static void orinoco_cs_detach(struct pcmcia_device *p_dev); |
| |
| /********************************************************************/ |
| /* Device methods */ |
| /********************************************************************/ |
| |
| static int |
| orinoco_cs_hard_reset(struct orinoco_private *priv) |
| { |
| struct orinoco_pccard *card = priv->card; |
| struct pcmcia_device *link = card->p_dev; |
| int err; |
| |
| /* We need atomic ops here, because we're not holding the lock */ |
| set_bit(0, &card->hard_reset_in_progress); |
| |
| err = pcmcia_reset_card(link, NULL); |
| if (err) |
| return err; |
| |
| msleep(100); |
| clear_bit(0, &card->hard_reset_in_progress); |
| |
| return 0; |
| } |
| |
| /********************************************************************/ |
| /* PCMCIA stuff */ |
| /********************************************************************/ |
| |
| /* |
| * This creates an "instance" of the driver, allocating local data |
| * structures for one device. The device is registered with Card |
| * Services. |
| * |
| * The dev_link structure is initialized, but we don't actually |
| * configure the card at this point -- we wait until we receive a card |
| * insertion event. */ |
| static int |
| orinoco_cs_probe(struct pcmcia_device *link) |
| { |
| struct net_device *dev; |
| struct orinoco_private *priv; |
| struct orinoco_pccard *card; |
| |
| dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset); |
| if (! dev) |
| return -ENOMEM; |
| priv = netdev_priv(dev); |
| card = priv->card; |
| |
| /* Link both structures together */ |
| card->p_dev = link; |
| link->priv = dev; |
| |
| /* Interrupt setup */ |
| link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; |
| link->irq.IRQInfo1 = IRQ_LEVEL_ID; |
| link->irq.Handler = orinoco_interrupt; |
| link->irq.Instance = dev; |
| |
| /* General socket configuration defaults can go here. In this |
| * client, we assume very little, and rely on the CIS for |
| * almost everything. In most clients, many details (i.e., |
| * number, sizes, and attributes of IO windows) are fixed by |
| * the nature of the device, and can be hard-wired here. */ |
| link->conf.Attributes = 0; |
| link->conf.IntType = INT_MEMORY_AND_IO; |
| |
| return orinoco_cs_config(link); |
| } /* orinoco_cs_attach */ |
| |
| /* |
| * This deletes a driver "instance". The device is de-registered with |
| * Card Services. If it has been released, all local data structures |
| * are freed. Otherwise, the structures will be freed when the device |
| * is released. |
| */ |
| static void orinoco_cs_detach(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| |
| if (link->dev_node) |
| unregister_netdev(dev); |
| |
| orinoco_cs_release(link); |
| |
| free_orinocodev(dev); |
| } /* orinoco_cs_detach */ |
| |
| /* |
| * orinoco_cs_config() is scheduled to run after a CARD_INSERTION |
| * event is received, to configure the PCMCIA socket, and to make the |
| * device available to the system. |
| */ |
| |
| #define CS_CHECK(fn, ret) do { \ |
| last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \ |
| } while (0) |
| |
| struct orinoco_cs_config_data { |
| config_info_t conf; |
| }; |
| |
| static int orinoco_cs_config_check(struct pcmcia_device *p_dev, |
| cistpl_cftable_entry_t *cfg, |
| cistpl_cftable_entry_t *dflt, |
| void *priv_data) |
| { |
| struct orinoco_cs_config_data *cfg_mem = priv_data; |
| |
| if (cfg->index == 0) |
| goto next_entry; |
| |
| /* Use power settings for Vcc and Vpp if present */ |
| /* Note that the CIS values need to be rescaled */ |
| if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { |
| if (cfg_mem->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { |
| DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n", cfg_mem->conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); |
| if (!ignore_cis_vcc) |
| goto next_entry; |
| } |
| } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { |
| if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { |
| DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n", cfg_mem->conf.Vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); |
| if (!ignore_cis_vcc) |
| goto next_entry; |
| } |
| } |
| |
| if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) |
| p_dev->conf.Vpp = |
| cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; |
| else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) |
| p_dev->conf.Vpp = |
| dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; |
| |
| /* Do we need to allocate an interrupt? */ |
| p_dev->conf.Attributes |= CONF_ENABLE_IRQ; |
| |
| /* IO window settings */ |
| p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; |
| if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { |
| cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; |
| p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; |
| if (!(io->flags & CISTPL_IO_8BIT)) |
| p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; |
| if (!(io->flags & CISTPL_IO_16BIT)) |
| p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; |
| p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; |
| p_dev->io.BasePort1 = io->win[0].base; |
| p_dev->io.NumPorts1 = io->win[0].len; |
| if (io->nwin > 1) { |
| p_dev->io.Attributes2 = p_dev->io.Attributes1; |
| p_dev->io.BasePort2 = io->win[1].base; |
| p_dev->io.NumPorts2 = io->win[1].len; |
| } |
| |
| /* This reserves IO space but doesn't actually enable it */ |
| if (pcmcia_request_io(p_dev, &p_dev->io) != 0) |
| goto next_entry; |
| } |
| return 0; |
| |
| next_entry: |
| pcmcia_disable_device(p_dev); |
| return -ENODEV; |
| }; |
| |
| static int |
| orinoco_cs_config(struct pcmcia_device *link) |
| { |
| struct orinoco_cs_config_data *cfg_mem; |
| struct net_device *dev = link->priv; |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct orinoco_pccard *card = priv->card; |
| hermes_t *hw = &priv->hw; |
| int last_fn, last_ret; |
| void __iomem *mem; |
| |
| cfg_mem = kzalloc(sizeof(struct orinoco_cs_config_data), GFP_KERNEL); |
| if (!cfg_mem) |
| return -ENOMEM; |
| |
| /* Look up the current Vcc */ |
| CS_CHECK(GetConfigurationInfo, |
| pcmcia_get_configuration_info(link, &cfg_mem->conf)); |
| |
| /* |
| * In this loop, we scan the CIS for configuration table |
| * entries, each of which describes a valid card |
| * configuration, including voltage, IO window, memory window, |
| * and interrupt settings. |
| * |
| * We make no assumptions about the card to be configured: we |
| * use just the information available in the CIS. In an ideal |
| * world, this would work for any PCMCIA card, but it requires |
| * a complete and accurate CIS. In practice, a driver usually |
| * "knows" most of these things without consulting the CIS, |
| * and most client drivers will only use the CIS to fill in |
| * implementation-defined details. |
| */ |
| last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, cfg_mem); |
| if (last_ret) { |
| if (!ignore_cis_vcc) |
| printk(KERN_ERR PFX "GetNextTuple(): No matching " |
| "CIS configuration. Maybe you need the " |
| "ignore_cis_vcc=1 parameter.\n"); |
| cs_error(link, RequestIO, last_ret); |
| goto failed; |
| } |
| |
| /* |
| * Allocate an interrupt line. Note that this does not assign |
| * a handler to the interrupt, unless the 'Handler' member of |
| * the irq structure is initialized. |
| */ |
| CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); |
| |
| /* We initialize the hermes structure before completing PCMCIA |
| * configuration just in case the interrupt handler gets |
| * called. */ |
| mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); |
| if (!mem) |
| goto cs_failed; |
| |
| hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); |
| |
| /* |
| * This actually configures the PCMCIA socket -- setting up |
| * the I/O windows and the interrupt mapping, and putting the |
| * card and host interface into "Memory and IO" mode. |
| */ |
| CS_CHECK(RequestConfiguration, |
| pcmcia_request_configuration(link, &link->conf)); |
| |
| /* Ok, we have the configuration, prepare to register the netdev */ |
| dev->base_addr = link->io.BasePort1; |
| dev->irq = link->irq.AssignedIRQ; |
| card->node.major = card->node.minor = 0; |
| |
| SET_NETDEV_DEV(dev, &handle_to_dev(link)); |
| /* Tell the stack we exist */ |
| if (register_netdev(dev) != 0) { |
| printk(KERN_ERR PFX "register_netdev() failed\n"); |
| goto failed; |
| } |
| |
| /* At this point, the dev_node_t structure(s) needs to be |
| * initialized and arranged in a linked list at link->dev_node. */ |
| strcpy(card->node.dev_name, dev->name); |
| link->dev_node = &card->node; /* link->dev_node being non-NULL is also |
| used to indicate that the |
| net_device has been registered */ |
| |
| /* Finally, report what we've done */ |
| printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io " |
| "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id, |
| link->irq.AssignedIRQ, link->io.BasePort1, |
| link->io.BasePort1 + link->io.NumPorts1 - 1); |
| kfree(cfg_mem); |
| return 0; |
| |
| cs_failed: |
| cs_error(link, last_fn, last_ret); |
| |
| failed: |
| orinoco_cs_release(link); |
| kfree(cfg_mem); |
| return -ENODEV; |
| } /* orinoco_cs_config */ |
| |
| /* |
| * After a card is removed, orinoco_cs_release() will unregister the |
| * device, and release the PCMCIA configuration. If the device is |
| * still open, this will be postponed until it is closed. |
| */ |
| static void |
| orinoco_cs_release(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| struct orinoco_private *priv = netdev_priv(dev); |
| unsigned long flags; |
| |
| /* We're committed to taking the device away now, so mark the |
| * hardware as unavailable */ |
| spin_lock_irqsave(&priv->lock, flags); |
| priv->hw_unavailable++; |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| pcmcia_disable_device(link); |
| if (priv->hw.iobase) |
| ioport_unmap(priv->hw.iobase); |
| } /* orinoco_cs_release */ |
| |
| static int orinoco_cs_suspend(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct orinoco_pccard *card = priv->card; |
| int err = 0; |
| unsigned long flags; |
| |
| /* This is probably racy, but I can't think of |
| a better way, short of rewriting the PCMCIA |
| layer to not suck :-( */ |
| if (! test_bit(0, &card->hard_reset_in_progress)) { |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| err = __orinoco_down(dev); |
| if (err) |
| printk(KERN_WARNING "%s: Error %d downing interface\n", |
| dev->name, err); |
| |
| netif_device_detach(dev); |
| priv->hw_unavailable++; |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| } |
| |
| return 0; |
| } |
| |
| static int orinoco_cs_resume(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct orinoco_pccard *card = priv->card; |
| int err = 0; |
| |
| if (! test_bit(0, &card->hard_reset_in_progress)) { |
| err = orinoco_reinit_firmware(dev); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d re-initializing firmware\n", |
| dev->name, err); |
| return -EIO; |
| } |
| |
| spin_lock(&priv->lock); |
| |
| netif_device_attach(dev); |
| priv->hw_unavailable--; |
| |
| if (priv->open && ! priv->hw_unavailable) { |
| err = __orinoco_up(dev); |
| if (err) |
| printk(KERN_ERR "%s: Error %d restarting card\n", |
| dev->name, err); |
| } |
| |
| spin_unlock(&priv->lock); |
| } |
| |
| return err; |
| } |
| |
| |
| /********************************************************************/ |
| /* Module initialization */ |
| /********************************************************************/ |
| |
| /* Can't be declared "const" or the whole __initdata section will |
| * become const */ |
| static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION |
| " (David Gibson <hermes@gibson.dropbear.id.au>, " |
| "Pavel Roskin <proski@gnu.org>, et al)"; |
| |
| static struct pcmcia_device_id orinoco_cs_ids[] = { |
| PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */ |
| PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */ |
| PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */ |
| PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ |
| PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */ |
| PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */ |
| PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */ |
| PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */ |
| PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */ |
| PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */ |
| PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */ |
| PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */ |
| PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */ |
| PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */ |
| PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */ |
| PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */ |
| PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */ |
| PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */ |
| PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */ |
| PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */ |
| PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */ |
| PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */ |
| PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */ |
| PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */ |
| PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */ |
| PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */ |
| PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */ |
| PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */ |
| PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9), |
| PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3), |
| PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5), |
| PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2), |
| PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092), |
| PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f), |
| PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842), |
| PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e), |
| PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169), |
| PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb), |
| PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3), |
| PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18), |
| PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90), |
| PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b), |
| PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39), |
| PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584), |
| PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9), |
| PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae), |
| PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac), |
| PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab), |
| PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916), |
| PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146), |
| PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3), |
| PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c), |
| PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0), |
| PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077), |
| PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18), |
| PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77), |
| PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf), |
| PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2), |
| PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92), |
| PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395), |
| PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a), |
| PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410), |
| PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3), |
| PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01), |
| PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a), |
| PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1), |
| PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1), |
| PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767), |
| PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6), |
| PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed), |
| PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39), |
| PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264), |
| PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178), |
| PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9), |
| PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26), |
| PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b), |
| PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757), |
| PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a), |
| PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e), |
| PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39), |
| PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee), |
| PCMCIA_DEVICE_NULL, |
| }; |
| MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); |
| |
| static struct pcmcia_driver orinoco_driver = { |
| .owner = THIS_MODULE, |
| .drv = { |
| .name = DRIVER_NAME, |
| }, |
| .probe = orinoco_cs_probe, |
| .remove = orinoco_cs_detach, |
| .id_table = orinoco_cs_ids, |
| .suspend = orinoco_cs_suspend, |
| .resume = orinoco_cs_resume, |
| }; |
| |
| static int __init |
| init_orinoco_cs(void) |
| { |
| printk(KERN_DEBUG "%s\n", version); |
| |
| return pcmcia_register_driver(&orinoco_driver); |
| } |
| |
| static void __exit |
| exit_orinoco_cs(void) |
| { |
| pcmcia_unregister_driver(&orinoco_driver); |
| } |
| |
| module_init(init_orinoco_cs); |
| module_exit(exit_orinoco_cs); |