| /* |
| * OMAP2xxx CM module functions |
| * |
| * Copyright (C) 2009 Nokia Corporation |
| * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc. |
| * Paul Walmsley |
| * Rajendra Nayak <rnayak@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| |
| #include "soc.h" |
| #include "iomap.h" |
| #include "common.h" |
| #include "prm2xxx.h" |
| #include "cm.h" |
| #include "cm2xxx.h" |
| #include "cm-regbits-24xx.h" |
| #include "clockdomain.h" |
| |
| /* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */ |
| #define DPLL_AUTOIDLE_DISABLE 0x0 |
| #define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3 |
| |
| /* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */ |
| #define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0 |
| #define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3 |
| |
| /* CM_IDLEST_PLL bit value offset for APLLs (OMAP2xxx only) */ |
| #define EN_APLL_LOCKED 3 |
| |
| static const u8 omap2xxx_cm_idlest_offs[] = { |
| CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4 |
| }; |
| |
| /* |
| * |
| */ |
| |
| static void _write_clktrctrl(u8 c, s16 module, u32 mask) |
| { |
| u32 v; |
| |
| v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL); |
| v &= ~mask; |
| v |= c << __ffs(mask); |
| omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL); |
| } |
| |
| bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask) |
| { |
| u32 v; |
| |
| v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL); |
| v &= mask; |
| v >>= __ffs(mask); |
| |
| return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0; |
| } |
| |
| void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask) |
| { |
| _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask); |
| } |
| |
| void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask) |
| { |
| _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask); |
| } |
| |
| /* |
| * DPLL autoidle control |
| */ |
| |
| static void _omap2xxx_set_dpll_autoidle(u8 m) |
| { |
| u32 v; |
| |
| v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); |
| v &= ~OMAP24XX_AUTO_DPLL_MASK; |
| v |= m << OMAP24XX_AUTO_DPLL_SHIFT; |
| omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE); |
| } |
| |
| void omap2xxx_cm_set_dpll_disable_autoidle(void) |
| { |
| _omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP); |
| } |
| |
| void omap2xxx_cm_set_dpll_auto_low_power_stop(void) |
| { |
| _omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE); |
| } |
| |
| /* |
| * APLL control |
| */ |
| |
| static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask) |
| { |
| u32 v; |
| |
| v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); |
| v &= ~mask; |
| v |= m << __ffs(mask); |
| omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE); |
| } |
| |
| void omap2xxx_cm_set_apll54_disable_autoidle(void) |
| { |
| _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP, |
| OMAP24XX_AUTO_54M_MASK); |
| } |
| |
| void omap2xxx_cm_set_apll54_auto_low_power_stop(void) |
| { |
| _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE, |
| OMAP24XX_AUTO_54M_MASK); |
| } |
| |
| void omap2xxx_cm_set_apll96_disable_autoidle(void) |
| { |
| _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP, |
| OMAP24XX_AUTO_96M_MASK); |
| } |
| |
| void omap2xxx_cm_set_apll96_auto_low_power_stop(void) |
| { |
| _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE, |
| OMAP24XX_AUTO_96M_MASK); |
| } |
| |
| /* Enable an APLL if off */ |
| static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit) |
| { |
| u32 v, m; |
| |
| m = EN_APLL_LOCKED << enable_bit; |
| |
| v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); |
| if (v & m) |
| return 0; /* apll already enabled */ |
| |
| v |= m; |
| omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN); |
| |
| omap2xxx_cm_wait_module_ready(PLL_MOD, 1, status_bit); |
| |
| /* |
| * REVISIT: Should we return an error code if |
| * omap2xxx_cm_wait_module_ready() fails? |
| */ |
| return 0; |
| } |
| |
| /* Stop APLL */ |
| static void _omap2xxx_apll_disable(u8 enable_bit) |
| { |
| u32 v; |
| |
| v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); |
| v &= ~(EN_APLL_LOCKED << enable_bit); |
| omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN); |
| } |
| |
| /* Enable an APLL if off */ |
| int omap2xxx_cm_apll54_enable(void) |
| { |
| return _omap2xxx_apll_enable(OMAP24XX_EN_54M_PLL_SHIFT, |
| OMAP24XX_ST_54M_APLL_SHIFT); |
| } |
| |
| /* Enable an APLL if off */ |
| int omap2xxx_cm_apll96_enable(void) |
| { |
| return _omap2xxx_apll_enable(OMAP24XX_EN_96M_PLL_SHIFT, |
| OMAP24XX_ST_96M_APLL_SHIFT); |
| } |
| |
| /* Stop APLL */ |
| void omap2xxx_cm_apll54_disable(void) |
| { |
| _omap2xxx_apll_disable(OMAP24XX_EN_54M_PLL_SHIFT); |
| } |
| |
| /* Stop APLL */ |
| void omap2xxx_cm_apll96_disable(void) |
| { |
| _omap2xxx_apll_disable(OMAP24XX_EN_96M_PLL_SHIFT); |
| } |
| |
| /** |
| * omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components |
| * @idlest_reg: CM_IDLEST* virtual address |
| * @prcm_inst: pointer to an s16 to return the PRCM instance offset |
| * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID |
| * |
| * XXX This function is only needed until absolute register addresses are |
| * removed from the OMAP struct clk records. |
| */ |
| int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, |
| u8 *idlest_reg_id) |
| { |
| unsigned long offs; |
| u8 idlest_offs; |
| int i; |
| |
| if (idlest_reg < cm_base || idlest_reg > (cm_base + 0x0fff)) |
| return -EINVAL; |
| |
| idlest_offs = (unsigned long)idlest_reg & 0xff; |
| for (i = 0; i < ARRAY_SIZE(omap2xxx_cm_idlest_offs); i++) { |
| if (idlest_offs == omap2xxx_cm_idlest_offs[i]) { |
| *idlest_reg_id = i + 1; |
| break; |
| } |
| } |
| |
| if (i == ARRAY_SIZE(omap2xxx_cm_idlest_offs)) |
| return -EINVAL; |
| |
| offs = idlest_reg - cm_base; |
| offs &= 0xff00; |
| *prcm_inst = offs; |
| |
| return 0; |
| } |
| |
| /* |
| * |
| */ |
| |
| /** |
| * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby |
| * @prcm_mod: PRCM module offset |
| * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3) |
| * @idlest_shift: shift of the bit in the CM_IDLEST* register to check |
| * |
| * Wait for the PRCM to indicate that the module identified by |
| * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon |
| * success or -EBUSY if the module doesn't enable in time. |
| */ |
| int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) |
| { |
| int ena = 0, i = 0; |
| u8 cm_idlest_reg; |
| u32 mask; |
| |
| if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs))) |
| return -EINVAL; |
| |
| cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1]; |
| |
| mask = 1 << idlest_shift; |
| ena = mask; |
| |
| omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & |
| mask) == ena), MAX_MODULE_READY_TIME, i); |
| |
| return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; |
| } |
| |
| /* Clockdomain low-level functions */ |
| |
| static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm) |
| { |
| if (atomic_read(&clkdm->usecount) > 0) |
| _clkdm_add_autodeps(clkdm); |
| |
| omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, |
| clkdm->clktrctrl_mask); |
| } |
| |
| static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm) |
| { |
| omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, |
| clkdm->clktrctrl_mask); |
| |
| if (atomic_read(&clkdm->usecount) > 0) |
| _clkdm_del_autodeps(clkdm); |
| } |
| |
| static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm) |
| { |
| bool hwsup = false; |
| |
| if (!clkdm->clktrctrl_mask) |
| return 0; |
| |
| hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, |
| clkdm->clktrctrl_mask); |
| |
| if (hwsup) { |
| /* Disable HW transitions when we are changing deps */ |
| omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, |
| clkdm->clktrctrl_mask); |
| _clkdm_add_autodeps(clkdm); |
| omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, |
| clkdm->clktrctrl_mask); |
| } else { |
| if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) |
| omap2xxx_clkdm_wakeup(clkdm); |
| } |
| |
| return 0; |
| } |
| |
| static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm) |
| { |
| bool hwsup = false; |
| |
| if (!clkdm->clktrctrl_mask) |
| return 0; |
| |
| hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, |
| clkdm->clktrctrl_mask); |
| |
| if (hwsup) { |
| /* Disable HW transitions when we are changing deps */ |
| omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, |
| clkdm->clktrctrl_mask); |
| _clkdm_del_autodeps(clkdm); |
| omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, |
| clkdm->clktrctrl_mask); |
| } else { |
| if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) |
| omap2xxx_clkdm_sleep(clkdm); |
| } |
| |
| return 0; |
| } |
| |
| struct clkdm_ops omap2_clkdm_operations = { |
| .clkdm_add_wkdep = omap2_clkdm_add_wkdep, |
| .clkdm_del_wkdep = omap2_clkdm_del_wkdep, |
| .clkdm_read_wkdep = omap2_clkdm_read_wkdep, |
| .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps, |
| .clkdm_sleep = omap2xxx_clkdm_sleep, |
| .clkdm_wakeup = omap2xxx_clkdm_wakeup, |
| .clkdm_allow_idle = omap2xxx_clkdm_allow_idle, |
| .clkdm_deny_idle = omap2xxx_clkdm_deny_idle, |
| .clkdm_clk_enable = omap2xxx_clkdm_clk_enable, |
| .clkdm_clk_disable = omap2xxx_clkdm_clk_disable, |
| }; |
| |
| /* |
| * |
| */ |
| |
| static struct cm_ll_data omap2xxx_cm_ll_data = { |
| .split_idlest_reg = &omap2xxx_cm_split_idlest_reg, |
| .wait_module_ready = &omap2xxx_cm_wait_module_ready, |
| }; |
| |
| int __init omap2xxx_cm_init(void) |
| { |
| if (!cpu_is_omap24xx()) |
| return 0; |
| |
| return cm_register(&omap2xxx_cm_ll_data); |
| } |
| |
| static void __exit omap2xxx_cm_exit(void) |
| { |
| if (!cpu_is_omap24xx()) |
| return; |
| |
| /* Should never happen */ |
| WARN(cm_unregister(&omap2xxx_cm_ll_data), |
| "%s: cm_ll_data function pointer mismatch\n", __func__); |
| } |
| __exitcall(omap2xxx_cm_exit); |