V4L/DVB (5960): Add module parameter to enable SFN workaround
In some areas in the world the broadcasters are not using the same
cellid for each transmitter in a SFN. The DiBcom has problems with
that setup. The module parameter buggy_sfn_workaround makes it re-usable.
Signed-off-by: Matt Doran <matt.doran@papercut.biz>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/dvb/frontends/dib3000mc.c b/drivers/media/dvb/frontends/dib3000mc.c
index 38d2322..f0096de 100644
--- a/drivers/media/dvb/frontends/dib3000mc.c
+++ b/drivers/media/dvb/frontends/dib3000mc.c
@@ -13,10 +13,6 @@
#include <linux/kernel.h>
#include <linux/i2c.h>
-//#include <linux/init.h>
-//#include <linux/delay.h>
-//#include <linux/string.h>
-//#include <linux/slab.h>
#include "dvb_frontend.h"
@@ -26,6 +22,10 @@
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
+static int buggy_sfn_workaround;
+module_param(buggy_sfn_workaround, int, 0644);
+MODULE_PARM_DESC(debug, "Enable work-around for buggy SFNs (default: 0)");
+
#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB3000MC/P:"); printk(args); printk("\n"); } } while (0)
struct dib3000mc_state {
@@ -42,6 +42,8 @@
fe_bandwidth_t current_bandwidth;
u16 dev_id;
+
+ u8 sfn_workaround_active :1;
};
static u16 dib3000mc_read_word(struct dib3000mc_state *state, u16 reg)
@@ -591,7 +593,14 @@
dib3000mc_set_channel_cfg(state, ch, 0);
// activates isi
- dib3000mc_write_word(state, 29, 0x1073);
+ if (state->sfn_workaround_active) {
+ dprintk("SFN workaround is active\n");
+ dib3000mc_write_word(state, 29, 0x1273);
+ dib3000mc_write_word(state, 108, 0x4000); // P_pha3_force_pha_shift
+ } else {
+ dib3000mc_write_word(state, 29, 0x1073);
+ dib3000mc_write_word(state, 108, 0x0000); // P_pha3_force_pha_shift
+ }
dib3000mc_set_adp_cfg(state, (u8)ch->u.ofdm.constellation);
if (ch->u.ofdm.transmission_mode == TRANSMISSION_MODE_8K) {
@@ -679,6 +688,9 @@
state->current_bandwidth = fep->u.ofdm.bandwidth;
dib3000mc_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->u.ofdm.bandwidth));
+ /* maybe the parameter has been changed */
+ state->sfn_workaround_active = buggy_sfn_workaround;
+
if (fe->ops.tuner_ops.set_params) {
fe->ops.tuner_ops.set_params(fe, fep);
msleep(100);
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index 1175ab9..aa7dc45 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -18,6 +18,10 @@
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
+static int buggy_sfn_workaround;
+module_param(buggy_sfn_workaround, int, 0644);
+MODULE_PARM_DESC(debug, "Enable work-around for buggy SFNs (default: 0)");
+
#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000P: "); printk(args); printk("\n"); } } while (0)
struct dib7000p_state {
@@ -44,6 +48,8 @@
u16 gpio_dir;
u16 gpio_val;
+
+ u8 sfn_workaround_active :1;
};
enum dib7000p_power_mode {
@@ -751,8 +757,8 @@
/* offset loop parameters */
dib7000p_write_word(state, 26, 0x6680); // timf(6xxx)
- dib7000p_write_word(state, 29, 0x1273); // isi inh1273 on1073
dib7000p_write_word(state, 32, 0x0003); // pha_off_max(xxx3)
+ dib7000p_write_word(state, 29, 0x1273); // isi
dib7000p_write_word(state, 33, 0x0005); // sfreq(xxx5)
/* P_dvsy_sync_wait */
@@ -959,7 +965,15 @@
msleep(45);
/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
- dib7000p_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3));
+ tmp = (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3);
+ if (state->sfn_workaround_active) {
+ dprintk( "SFN workaround is active");
+ tmp |= (1 << 9);
+ dib7000p_write_word(state, 166, 0x4000); // P_pha3_force_pha_shift
+ } else {
+ dib7000p_write_word(state, 166, 0x0000); // P_pha3_force_pha_shift
+ }
+ dib7000p_write_word(state, 29, tmp);
// never achieved a lock with that bandwidth so far - wait for osc-freq to update
if (state->timf == 0)
@@ -1119,6 +1133,9 @@
state->current_bandwidth = fep->u.ofdm.bandwidth;
dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->u.ofdm.bandwidth));
+ /* maybe the parameter has been changed */
+ state->sfn_workaround_active = buggy_sfn_workaround;
+
if (fe->ops.tuner_ops.set_params)
fe->ops.tuner_ops.set_params(fe, fep);