i40e: support for suspend and resume
Add basic support for handling suspend and resume. We'll add
Wake-on-LAN support later.
Change-Id: Iea5e11c81bd9289a5bdbf086de8f626911a0b5ce
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 24a47ee..40706c1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -133,6 +133,7 @@
__I40E_GLOBAL_RESET_REQUESTED,
__I40E_EMP_RESET_REQUESTED,
__I40E_FILTER_OVERFLOW_PROMISC,
+ __I40E_SUSPENDED,
};
enum i40e_interrupt_policy {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 19ad3c0..fba0aad 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -7749,7 +7749,11 @@
dev_info(&pdev->dev, "%s: error %d\n", __func__, error);
/* shutdown all operations */
- i40e_pf_quiesce_all_vsi(pf);
+ if (!test_bit(__I40E_SUSPENDED, &pf->state)) {
+ rtnl_lock();
+ i40e_prep_for_reset(pf);
+ rtnl_unlock();
+ }
/* Request a slot reset */
return PCI_ERS_RESULT_NEED_RESET;
@@ -7812,9 +7816,95 @@
struct i40e_pf *pf = pci_get_drvdata(pdev);
dev_info(&pdev->dev, "%s\n", __func__);
+ if (test_bit(__I40E_SUSPENDED, &pf->state))
+ return;
+
+ rtnl_lock();
i40e_handle_reset_warning(pf);
+ rtnl_lock();
}
+/**
+ * i40e_shutdown - PCI callback for shutting down
+ * @pdev: PCI device information struct
+ **/
+static void i40e_shutdown(struct pci_dev *pdev)
+{
+ struct i40e_pf *pf = pci_get_drvdata(pdev);
+
+ set_bit(__I40E_SUSPENDED, &pf->state);
+ set_bit(__I40E_DOWN, &pf->state);
+ rtnl_lock();
+ i40e_prep_for_reset(pf);
+ rtnl_unlock();
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, false); /* No WoL support yet */
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+}
+
+#ifdef CONFIG_PM
+/**
+ * i40e_suspend - PCI callback for moving to D3
+ * @pdev: PCI device information struct
+ **/
+static int i40e_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct i40e_pf *pf = pci_get_drvdata(pdev);
+
+ set_bit(__I40E_SUSPENDED, &pf->state);
+ set_bit(__I40E_DOWN, &pf->state);
+ rtnl_lock();
+ i40e_prep_for_reset(pf);
+ rtnl_unlock();
+
+ pci_wake_from_d3(pdev, false); /* No WoL support yet */
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+/**
+ * i40e_resume - PCI callback for waking up from D3
+ * @pdev: PCI device information struct
+ **/
+static int i40e_resume(struct pci_dev *pdev)
+{
+ struct i40e_pf *pf = pci_get_drvdata(pdev);
+ u32 err;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ /* pci_restore_state() clears dev->state_saves, so
+ * call pci_save_state() again to restore it.
+ */
+ pci_save_state(pdev);
+
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "%s: Cannot enable PCI device from suspend\n",
+ __func__);
+ return err;
+ }
+ pci_set_master(pdev);
+
+ /* no wakeup events while running */
+ pci_wake_from_d3(pdev, false);
+
+ /* handling the reset will rebuild the device state */
+ if (test_and_clear_bit(__I40E_SUSPENDED, &pf->state)) {
+ clear_bit(__I40E_DOWN, &pf->state);
+ rtnl_lock();
+ i40e_reset_and_rebuild(pf, false);
+ rtnl_unlock();
+ }
+
+ return 0;
+}
+
+#endif
static const struct pci_error_handlers i40e_err_handler = {
.error_detected = i40e_pci_error_detected,
.slot_reset = i40e_pci_error_slot_reset,
@@ -7826,6 +7916,11 @@
.id_table = i40e_pci_tbl,
.probe = i40e_probe,
.remove = i40e_remove,
+#ifdef CONFIG_PM
+ .suspend = i40e_suspend,
+ .resume = i40e_resume,
+#endif
+ .shutdown = i40e_shutdown,
.err_handler = &i40e_err_handler,
.sriov_configure = i40e_pci_sriov_configure,
};