| /* |
| * Marvell Orion SPI controller driver |
| * |
| * Author: Shadi Ammouri <shadi@marvell.com> |
| * Copyright (C) 2007-2008 Marvell Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/spi/spi.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/clk.h> |
| #include <linux/sizes.h> |
| #include <asm/unaligned.h> |
| |
| #define DRIVER_NAME "orion_spi" |
| |
| #define ORION_NUM_CHIPSELECTS 1 /* only one slave is supported*/ |
| #define ORION_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */ |
| |
| #define ORION_SPI_IF_CTRL_REG 0x00 |
| #define ORION_SPI_IF_CONFIG_REG 0x04 |
| #define ORION_SPI_DATA_OUT_REG 0x08 |
| #define ORION_SPI_DATA_IN_REG 0x0c |
| #define ORION_SPI_INT_CAUSE_REG 0x10 |
| |
| #define ORION_SPI_MODE_CPOL (1 << 11) |
| #define ORION_SPI_MODE_CPHA (1 << 12) |
| #define ORION_SPI_IF_8_16_BIT_MODE (1 << 5) |
| #define ORION_SPI_CLK_PRESCALE_MASK 0x1F |
| #define ORION_SPI_MODE_MASK (ORION_SPI_MODE_CPOL | \ |
| ORION_SPI_MODE_CPHA) |
| |
| struct orion_spi { |
| struct spi_master *master; |
| void __iomem *base; |
| unsigned int max_speed; |
| unsigned int min_speed; |
| struct clk *clk; |
| }; |
| |
| static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg) |
| { |
| return orion_spi->base + reg; |
| } |
| |
| static inline void |
| orion_spi_setbits(struct orion_spi *orion_spi, u32 reg, u32 mask) |
| { |
| void __iomem *reg_addr = spi_reg(orion_spi, reg); |
| u32 val; |
| |
| val = readl(reg_addr); |
| val |= mask; |
| writel(val, reg_addr); |
| } |
| |
| static inline void |
| orion_spi_clrbits(struct orion_spi *orion_spi, u32 reg, u32 mask) |
| { |
| void __iomem *reg_addr = spi_reg(orion_spi, reg); |
| u32 val; |
| |
| val = readl(reg_addr); |
| val &= ~mask; |
| writel(val, reg_addr); |
| } |
| |
| static int orion_spi_set_transfer_size(struct orion_spi *orion_spi, int size) |
| { |
| if (size == 16) { |
| orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, |
| ORION_SPI_IF_8_16_BIT_MODE); |
| } else if (size == 8) { |
| orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG, |
| ORION_SPI_IF_8_16_BIT_MODE); |
| } else { |
| pr_debug("Bad bits per word value %d (only 8 or 16 are allowed).\n", |
| size); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed) |
| { |
| u32 tclk_hz; |
| u32 rate; |
| u32 prescale; |
| u32 reg; |
| struct orion_spi *orion_spi; |
| |
| orion_spi = spi_master_get_devdata(spi->master); |
| |
| tclk_hz = clk_get_rate(orion_spi->clk); |
| |
| /* |
| * the supported rates are: 4,6,8...30 |
| * round up as we look for equal or less speed |
| */ |
| rate = DIV_ROUND_UP(tclk_hz, speed); |
| rate = roundup(rate, 2); |
| |
| /* check if requested speed is too small */ |
| if (rate > 30) |
| return -EINVAL; |
| |
| if (rate < 4) |
| rate = 4; |
| |
| /* Convert the rate to SPI clock divisor value. */ |
| prescale = 0x10 + rate/2; |
| |
| reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); |
| reg = ((reg & ~ORION_SPI_CLK_PRESCALE_MASK) | prescale); |
| writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); |
| |
| return 0; |
| } |
| |
| static void |
| orion_spi_mode_set(struct spi_device *spi) |
| { |
| u32 reg; |
| struct orion_spi *orion_spi; |
| |
| orion_spi = spi_master_get_devdata(spi->master); |
| |
| reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); |
| reg &= ~ORION_SPI_MODE_MASK; |
| if (spi->mode & SPI_CPOL) |
| reg |= ORION_SPI_MODE_CPOL; |
| if (spi->mode & SPI_CPHA) |
| reg |= ORION_SPI_MODE_CPHA; |
| writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); |
| } |
| |
| /* |
| * called only when no transfer is active on the bus |
| */ |
| static int |
| orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) |
| { |
| struct orion_spi *orion_spi; |
| unsigned int speed = spi->max_speed_hz; |
| unsigned int bits_per_word = spi->bits_per_word; |
| int rc; |
| |
| orion_spi = spi_master_get_devdata(spi->master); |
| |
| if ((t != NULL) && t->speed_hz) |
| speed = t->speed_hz; |
| |
| if ((t != NULL) && t->bits_per_word) |
| bits_per_word = t->bits_per_word; |
| |
| orion_spi_mode_set(spi); |
| |
| rc = orion_spi_baudrate_set(spi, speed); |
| if (rc) |
| return rc; |
| |
| return orion_spi_set_transfer_size(orion_spi, bits_per_word); |
| } |
| |
| static void orion_spi_set_cs(struct orion_spi *orion_spi, int enable) |
| { |
| if (enable) |
| orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); |
| else |
| orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); |
| } |
| |
| static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi) |
| { |
| int i; |
| |
| for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) { |
| if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG))) |
| return 1; |
| else |
| udelay(1); |
| } |
| |
| return -1; |
| } |
| |
| static inline int |
| orion_spi_write_read_8bit(struct spi_device *spi, |
| const u8 **tx_buf, u8 **rx_buf) |
| { |
| void __iomem *tx_reg, *rx_reg, *int_reg; |
| struct orion_spi *orion_spi; |
| |
| orion_spi = spi_master_get_devdata(spi->master); |
| tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); |
| rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); |
| int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); |
| |
| /* clear the interrupt cause register */ |
| writel(0x0, int_reg); |
| |
| if (tx_buf && *tx_buf) |
| writel(*(*tx_buf)++, tx_reg); |
| else |
| writel(0, tx_reg); |
| |
| if (orion_spi_wait_till_ready(orion_spi) < 0) { |
| dev_err(&spi->dev, "TXS timed out\n"); |
| return -1; |
| } |
| |
| if (rx_buf && *rx_buf) |
| *(*rx_buf)++ = readl(rx_reg); |
| |
| return 1; |
| } |
| |
| static inline int |
| orion_spi_write_read_16bit(struct spi_device *spi, |
| const u16 **tx_buf, u16 **rx_buf) |
| { |
| void __iomem *tx_reg, *rx_reg, *int_reg; |
| struct orion_spi *orion_spi; |
| |
| orion_spi = spi_master_get_devdata(spi->master); |
| tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); |
| rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); |
| int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); |
| |
| /* clear the interrupt cause register */ |
| writel(0x0, int_reg); |
| |
| if (tx_buf && *tx_buf) |
| writel(__cpu_to_le16(get_unaligned((*tx_buf)++)), tx_reg); |
| else |
| writel(0, tx_reg); |
| |
| if (orion_spi_wait_till_ready(orion_spi) < 0) { |
| dev_err(&spi->dev, "TXS timed out\n"); |
| return -1; |
| } |
| |
| if (rx_buf && *rx_buf) |
| put_unaligned(__le16_to_cpu(readl(rx_reg)), (*rx_buf)++); |
| |
| return 1; |
| } |
| |
| static unsigned int |
| orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) |
| { |
| struct orion_spi *orion_spi; |
| unsigned int count; |
| int word_len; |
| |
| orion_spi = spi_master_get_devdata(spi->master); |
| word_len = spi->bits_per_word; |
| count = xfer->len; |
| |
| if (word_len == 8) { |
| const u8 *tx = xfer->tx_buf; |
| u8 *rx = xfer->rx_buf; |
| |
| do { |
| if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0) |
| goto out; |
| count--; |
| } while (count); |
| } else if (word_len == 16) { |
| const u16 *tx = xfer->tx_buf; |
| u16 *rx = xfer->rx_buf; |
| |
| do { |
| if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0) |
| goto out; |
| count -= 2; |
| } while (count); |
| } |
| |
| out: |
| return xfer->len - count; |
| } |
| |
| |
| static int orion_spi_transfer_one_message(struct spi_master *master, |
| struct spi_message *m) |
| { |
| struct orion_spi *orion_spi = spi_master_get_devdata(master); |
| struct spi_device *spi = m->spi; |
| struct spi_transfer *t = NULL; |
| int par_override = 0; |
| int status = 0; |
| int cs_active = 0; |
| |
| /* Load defaults */ |
| status = orion_spi_setup_transfer(spi, NULL); |
| |
| if (status < 0) |
| goto msg_done; |
| |
| list_for_each_entry(t, &m->transfers, transfer_list) { |
| /* make sure buffer length is even when working in 16 |
| * bit mode*/ |
| if ((t->bits_per_word == 16) && (t->len & 1)) { |
| dev_err(&spi->dev, |
| "message rejected : " |
| "odd data length %d while in 16 bit mode\n", |
| t->len); |
| status = -EIO; |
| goto msg_done; |
| } |
| |
| if (t->speed_hz && t->speed_hz < orion_spi->min_speed) { |
| dev_err(&spi->dev, |
| "message rejected : " |
| "device min speed (%d Hz) exceeds " |
| "required transfer speed (%d Hz)\n", |
| orion_spi->min_speed, t->speed_hz); |
| status = -EIO; |
| goto msg_done; |
| } |
| |
| if (par_override || t->speed_hz || t->bits_per_word) { |
| par_override = 1; |
| status = orion_spi_setup_transfer(spi, t); |
| if (status < 0) |
| break; |
| if (!t->speed_hz && !t->bits_per_word) |
| par_override = 0; |
| } |
| |
| if (!cs_active) { |
| orion_spi_set_cs(orion_spi, 1); |
| cs_active = 1; |
| } |
| |
| if (t->len) |
| m->actual_length += orion_spi_write_read(spi, t); |
| |
| if (t->delay_usecs) |
| udelay(t->delay_usecs); |
| |
| if (t->cs_change) { |
| orion_spi_set_cs(orion_spi, 0); |
| cs_active = 0; |
| } |
| } |
| |
| msg_done: |
| if (cs_active) |
| orion_spi_set_cs(orion_spi, 0); |
| |
| m->status = status; |
| spi_finalize_current_message(master); |
| |
| return 0; |
| } |
| |
| static int orion_spi_reset(struct orion_spi *orion_spi) |
| { |
| /* Verify that the CS is deasserted */ |
| orion_spi_set_cs(orion_spi, 0); |
| |
| return 0; |
| } |
| |
| static int orion_spi_setup(struct spi_device *spi) |
| { |
| struct orion_spi *orion_spi; |
| |
| orion_spi = spi_master_get_devdata(spi->master); |
| |
| if ((spi->max_speed_hz == 0) |
| || (spi->max_speed_hz > orion_spi->max_speed)) |
| spi->max_speed_hz = orion_spi->max_speed; |
| |
| if (spi->max_speed_hz < orion_spi->min_speed) { |
| dev_err(&spi->dev, "setup: requested speed too low %d Hz\n", |
| spi->max_speed_hz); |
| return -EINVAL; |
| } |
| |
| /* |
| * baudrate & width will be set orion_spi_setup_transfer |
| */ |
| return 0; |
| } |
| |
| static int orion_spi_probe(struct platform_device *pdev) |
| { |
| struct spi_master *master; |
| struct orion_spi *spi; |
| struct resource *r; |
| unsigned long tclk_hz; |
| int status = 0; |
| const u32 *iprop; |
| int size; |
| |
| master = spi_alloc_master(&pdev->dev, sizeof(*spi)); |
| if (master == NULL) { |
| dev_dbg(&pdev->dev, "master allocation failed\n"); |
| return -ENOMEM; |
| } |
| |
| if (pdev->id != -1) |
| master->bus_num = pdev->id; |
| if (pdev->dev.of_node) { |
| iprop = of_get_property(pdev->dev.of_node, "cell-index", |
| &size); |
| if (iprop && size == sizeof(*iprop)) |
| master->bus_num = *iprop; |
| } |
| |
| /* we support only mode 0, and no options */ |
| master->mode_bits = SPI_CPHA | SPI_CPOL; |
| |
| master->setup = orion_spi_setup; |
| master->transfer_one_message = orion_spi_transfer_one_message; |
| master->num_chipselect = ORION_NUM_CHIPSELECTS; |
| |
| platform_set_drvdata(pdev, master); |
| |
| spi = spi_master_get_devdata(master); |
| spi->master = master; |
| |
| spi->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(spi->clk)) { |
| status = PTR_ERR(spi->clk); |
| goto out; |
| } |
| |
| clk_prepare(spi->clk); |
| clk_enable(spi->clk); |
| tclk_hz = clk_get_rate(spi->clk); |
| spi->max_speed = DIV_ROUND_UP(tclk_hz, 4); |
| spi->min_speed = DIV_ROUND_UP(tclk_hz, 30); |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| spi->base = devm_ioremap_resource(&pdev->dev, r); |
| if (IS_ERR(spi->base)) { |
| status = PTR_ERR(spi->base); |
| goto out_rel_clk; |
| } |
| |
| if (orion_spi_reset(spi) < 0) |
| goto out_rel_clk; |
| |
| master->dev.of_node = pdev->dev.of_node; |
| status = devm_spi_register_master(&pdev->dev, master); |
| if (status < 0) |
| goto out_rel_clk; |
| |
| return status; |
| |
| out_rel_clk: |
| clk_disable_unprepare(spi->clk); |
| out: |
| spi_master_put(master); |
| return status; |
| } |
| |
| |
| static int orion_spi_remove(struct platform_device *pdev) |
| { |
| struct spi_master *master; |
| struct orion_spi *spi; |
| |
| master = platform_get_drvdata(pdev); |
| spi = spi_master_get_devdata(master); |
| |
| clk_disable_unprepare(spi->clk); |
| |
| return 0; |
| } |
| |
| MODULE_ALIAS("platform:" DRIVER_NAME); |
| |
| static const struct of_device_id orion_spi_of_match_table[] = { |
| { .compatible = "marvell,orion-spi", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, orion_spi_of_match_table); |
| |
| static struct platform_driver orion_spi_driver = { |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| .of_match_table = of_match_ptr(orion_spi_of_match_table), |
| }, |
| .probe = orion_spi_probe, |
| .remove = orion_spi_remove, |
| }; |
| |
| module_platform_driver(orion_spi_driver); |
| |
| MODULE_DESCRIPTION("Orion SPI driver"); |
| MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>"); |
| MODULE_LICENSE("GPL"); |