serial: sirf: add support for Marco chip
the marco and coming new CSR multiple SoCs have SET/CLR pair for
INTEN registers to avoid some read-modify-write.
this patch adds support for this and make the driver support current
up and coming mp SoCs.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 67a0d1b..26a3bc834 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -139,40 +139,66 @@
static void sirfsoc_uart_stop_tx(struct uart_port *port)
{
+ struct sirfsoc_uart_port *sirfport = to_sirfport(port);
unsigned int regv;
- regv = rd_regl(port, SIRFUART_INT_EN);
- wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_TX_INT_EN);
+
+ if (!sirfport->is_marco) {
+ regv = rd_regl(port, SIRFUART_INT_EN);
+ wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_TX_INT_EN);
+ } else {
+ wr_regl(port, SIRFUART_INT_EN_CLR, SIRFUART_TX_INT_EN);
+ }
}
void sirfsoc_uart_start_tx(struct uart_port *port)
{
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
unsigned long regv;
+
sirfsoc_uart_pio_tx_chars(sirfport, 1);
wr_regl(port, SIRFUART_TX_FIFO_OP, SIRFUART_TX_FIFO_START);
- regv = rd_regl(port, SIRFUART_INT_EN);
- wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_TX_INT_EN);
+
+ if (!sirfport->is_marco) {
+ regv = rd_regl(port, SIRFUART_INT_EN);
+ wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_TX_INT_EN);
+ } else {
+ wr_regl(port, SIRFUART_INT_EN, SIRFUART_TX_INT_EN);
+ }
}
static void sirfsoc_uart_stop_rx(struct uart_port *port)
{
+ struct sirfsoc_uart_port *sirfport = to_sirfport(port);
unsigned long regv;
+
wr_regl(port, SIRFUART_RX_FIFO_OP, 0);
- regv = rd_regl(port, SIRFUART_INT_EN);
- wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_RX_IO_INT_EN);
+
+ if (!sirfport->is_marco) {
+ regv = rd_regl(port, SIRFUART_INT_EN);
+ wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_RX_IO_INT_EN);
+ } else {
+ wr_regl(port, SIRFUART_INT_EN_CLR, SIRFUART_RX_IO_INT_EN);
+ }
}
static void sirfsoc_uart_disable_ms(struct uart_port *port)
{
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
unsigned long reg;
+
sirfport->ms_enabled = 0;
if (!sirfport->hw_flow_ctrl)
return;
+
reg = rd_regl(port, SIRFUART_AFC_CTRL);
wr_regl(port, SIRFUART_AFC_CTRL, reg & ~0x3FF);
- reg = rd_regl(port, SIRFUART_INT_EN);
- wr_regl(port, SIRFUART_INT_EN, reg & ~SIRFUART_CTS_INT_EN);
+
+ if (!sirfport->is_marco) {
+ reg = rd_regl(port, SIRFUART_INT_EN);
+ wr_regl(port, SIRFUART_INT_EN, reg & ~SIRFUART_CTS_INT_EN);
+ } else {
+ wr_regl(port, SIRFUART_INT_EN_CLR, SIRFUART_CTS_INT_EN);
+ }
}
static void sirfsoc_uart_enable_ms(struct uart_port *port)
@@ -180,13 +206,20 @@
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
unsigned long reg;
unsigned long flg;
+
if (!sirfport->hw_flow_ctrl)
return;
flg = SIRFUART_AFC_RX_EN | SIRFUART_AFC_TX_EN;
reg = rd_regl(port, SIRFUART_AFC_CTRL);
wr_regl(port, SIRFUART_AFC_CTRL, reg | flg);
- reg = rd_regl(port, SIRFUART_INT_EN);
- wr_regl(port, SIRFUART_INT_EN, reg | SIRFUART_CTS_INT_EN);
+
+ if (!sirfport->is_marco) {
+ reg = rd_regl(port, SIRFUART_INT_EN);
+ wr_regl(port, SIRFUART_INT_EN, reg | SIRFUART_CTS_INT_EN);
+ } else {
+ wr_regl(port, SIRFUART_INT_EN, SIRFUART_CTS_INT_EN);
+ }
+
uart_handle_cts_change(port,
!(rd_regl(port, SIRFUART_AFC_CTRL) & SIRFUART_CTS_IN_STATUS));
sirfport->ms_enabled = 1;
@@ -313,9 +346,16 @@
static void sirfsoc_uart_start_rx(struct uart_port *port)
{
- unsigned long regv;
- regv = rd_regl(port, SIRFUART_INT_EN);
- wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_RX_IO_INT_EN);
+ struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+
+ if (!sirfport->is_marco) {
+ unsigned long regv;
+ regv = rd_regl(port, SIRFUART_INT_EN);
+ wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_RX_IO_INT_EN);
+ } else {
+ wr_regl(port, SIRFUART_INT_EN, SIRFUART_RX_IO_INT_EN);
+ }
+
wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_RESET);
wr_regl(port, SIRFUART_RX_FIFO_OP, 0);
wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_START);
@@ -513,7 +553,12 @@
static void sirfsoc_uart_shutdown(struct uart_port *port)
{
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- wr_regl(port, SIRFUART_INT_EN, 0);
+
+ if (!sirfport->is_marco)
+ wr_regl(port, SIRFUART_INT_EN, 0);
+ else
+ wr_regl(port, SIRFUART_INT_EN_CLR, ~0UL);
+
free_irq(port->irq, sirfport);
if (sirfport->ms_enabled) {
sirfsoc_uart_disable_ms(port);
@@ -652,6 +697,9 @@
port->dev = &pdev->dev;
port->private_data = sirfport;
+ if (of_device_is_compatible(pdev->dev.of_node, "sirf,marco-uart"))
+ sirfport->is_marco = true;
+
if (of_find_property(pdev->dev.of_node, "hw_flow_ctrl", NULL))
sirfport->hw_flow_ctrl = 1;
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index 85328ba..6216660 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -13,6 +13,7 @@
#define SIRFUART_DIVISOR 0x0050
#define SIRFUART_INT_EN 0x0054
#define SIRFUART_INT_STATUS 0x0058
+#define SIRFUART_INT_EN_CLR 0x0060
#define SIRFUART_TX_DMA_IO_CTRL 0x0100
#define SIRFUART_TX_DMA_IO_LEN 0x0104
#define SIRFUART_TX_FIFO_CTRL 0x0108
@@ -164,6 +165,8 @@
struct uart_port port;
struct pinctrl *p;
struct clk *clk;
+ /* for SiRFmarco, there are SET/CLR for UART_INT_EN */
+ bool is_marco;
};
/* Hardware Flow Control */