| /* |
| * BQ27x00 battery driver |
| * |
| * Copyright (C) 2008 Rodolfo Giometti <giometti@linux.it> |
| * Copyright (C) 2008 Eurotech S.p.A. <info@eurotech.it> |
| * Copyright (C) 2010-2011 Lars-Peter Clausen <lars@metafoo.de> |
| * Copyright (C) 2011 Pali Rohár <pali.rohar@gmail.com> |
| * |
| * Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc. |
| * |
| * This package is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR |
| * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED |
| * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. |
| * |
| */ |
| |
| /* |
| * Datasheets: |
| * http://focus.ti.com/docs/prod/folders/print/bq27000.html |
| * http://focus.ti.com/docs/prod/folders/print/bq27500.html |
| * http://www.ti.com/product/bq27425-g1 |
| * http://www.ti.com/product/BQ27742-G1 |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/param.h> |
| #include <linux/jiffies.h> |
| #include <linux/workqueue.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/idr.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <asm/unaligned.h> |
| |
| #include <linux/power/bq27x00_battery.h> |
| |
| #define DRIVER_VERSION "1.2.0" |
| |
| #define BQ27x00_REG_TEMP 0x06 |
| #define BQ27x00_REG_VOLT 0x08 |
| #define BQ27x00_REG_AI 0x14 |
| #define BQ27x00_REG_FLAGS 0x0A |
| #define BQ27x00_REG_TTE 0x16 |
| #define BQ27x00_REG_TTF 0x18 |
| #define BQ27x00_REG_TTECP 0x26 |
| #define BQ27x00_REG_NAC 0x0C /* Nominal available capacity */ |
| #define BQ27x00_REG_LMD 0x12 /* Last measured discharge */ |
| #define BQ27x00_REG_CYCT 0x2A /* Cycle count total */ |
| #define BQ27x00_REG_AE 0x22 /* Available energy */ |
| #define BQ27x00_POWER_AVG 0x24 |
| |
| #define BQ27000_REG_RSOC 0x0B /* Relative State-of-Charge */ |
| #define BQ27000_REG_ILMD 0x76 /* Initial last measured discharge */ |
| #define BQ27000_FLAG_EDVF BIT(0) /* Final End-of-Discharge-Voltage flag */ |
| #define BQ27000_FLAG_EDV1 BIT(1) /* First End-of-Discharge-Voltage flag */ |
| #define BQ27000_FLAG_CI BIT(4) /* Capacity Inaccurate flag */ |
| #define BQ27000_FLAG_FC BIT(5) |
| #define BQ27000_FLAG_CHGS BIT(7) /* Charge state flag */ |
| |
| #define BQ27500_REG_SOC 0x2C |
| #define BQ27500_REG_DCAP 0x3C /* Design capacity */ |
| #define BQ27500_FLAG_DSC BIT(0) |
| #define BQ27500_FLAG_SOCF BIT(1) /* State-of-Charge threshold final */ |
| #define BQ27500_FLAG_SOC1 BIT(2) /* State-of-Charge threshold 1 */ |
| #define BQ27500_FLAG_FC BIT(9) |
| #define BQ27500_FLAG_OTC BIT(15) |
| |
| #define BQ27742_POWER_AVG 0x76 |
| |
| /* bq27425 register addresses are same as bq27x00 addresses minus 4 */ |
| #define BQ27425_REG_OFFSET 0x04 |
| #define BQ27425_REG_SOC 0x18 /* Register address plus offset */ |
| |
| #define BQ27000_RS 20 /* Resistor sense */ |
| #define BQ27x00_POWER_CONSTANT (256 * 29200 / 1000) |
| |
| struct bq27x00_device_info; |
| struct bq27x00_access_methods { |
| int (*read)(struct bq27x00_device_info *di, u8 reg, bool single); |
| }; |
| |
| enum bq27x00_chip { BQ27000, BQ27500, BQ27425, BQ27742}; |
| |
| struct bq27x00_reg_cache { |
| int temperature; |
| int time_to_empty; |
| int time_to_empty_avg; |
| int time_to_full; |
| int charge_full; |
| int cycle_count; |
| int capacity; |
| int energy; |
| int flags; |
| int power_avg; |
| int health; |
| }; |
| |
| struct bq27x00_device_info { |
| struct device *dev; |
| int id; |
| enum bq27x00_chip chip; |
| |
| struct bq27x00_reg_cache cache; |
| int charge_design_full; |
| |
| unsigned long last_update; |
| struct delayed_work work; |
| |
| struct power_supply bat; |
| |
| struct bq27x00_access_methods bus; |
| |
| struct mutex lock; |
| }; |
| |
| static enum power_supply_property bq27x00_battery_props[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_CAPACITY, |
| POWER_SUPPLY_PROP_CAPACITY_LEVEL, |
| POWER_SUPPLY_PROP_TEMP, |
| POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, |
| POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, |
| POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, |
| POWER_SUPPLY_PROP_TECHNOLOGY, |
| POWER_SUPPLY_PROP_CHARGE_FULL, |
| POWER_SUPPLY_PROP_CHARGE_NOW, |
| POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, |
| POWER_SUPPLY_PROP_CYCLE_COUNT, |
| POWER_SUPPLY_PROP_ENERGY_NOW, |
| POWER_SUPPLY_PROP_POWER_AVG, |
| POWER_SUPPLY_PROP_HEALTH, |
| }; |
| |
| static enum power_supply_property bq27425_battery_props[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_CAPACITY, |
| POWER_SUPPLY_PROP_CAPACITY_LEVEL, |
| POWER_SUPPLY_PROP_TEMP, |
| POWER_SUPPLY_PROP_TECHNOLOGY, |
| POWER_SUPPLY_PROP_CHARGE_FULL, |
| POWER_SUPPLY_PROP_CHARGE_NOW, |
| POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, |
| }; |
| |
| static enum power_supply_property bq27742_battery_props[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_CAPACITY, |
| POWER_SUPPLY_PROP_CAPACITY_LEVEL, |
| POWER_SUPPLY_PROP_TEMP, |
| POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, |
| POWER_SUPPLY_PROP_TECHNOLOGY, |
| POWER_SUPPLY_PROP_CHARGE_FULL, |
| POWER_SUPPLY_PROP_CHARGE_NOW, |
| POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, |
| POWER_SUPPLY_PROP_CYCLE_COUNT, |
| POWER_SUPPLY_PROP_POWER_AVG, |
| POWER_SUPPLY_PROP_HEALTH, |
| }; |
| |
| static unsigned int poll_interval = 360; |
| module_param(poll_interval, uint, 0644); |
| MODULE_PARM_DESC(poll_interval, "battery poll interval in seconds - " \ |
| "0 disables polling"); |
| |
| /* |
| * Common code for BQ27x00 devices |
| */ |
| |
| static inline int bq27x00_read(struct bq27x00_device_info *di, u8 reg, |
| bool single) |
| { |
| if (di->chip == BQ27425) |
| return di->bus.read(di, reg - BQ27425_REG_OFFSET, single); |
| return di->bus.read(di, reg, single); |
| } |
| |
| /* |
| * Higher versions of the chip like BQ27425 and BQ27500 |
| * differ from BQ27000 and BQ27200 in calculation of certain |
| * parameters. Hence we need to check for the chip type. |
| */ |
| static bool bq27xxx_is_chip_version_higher(struct bq27x00_device_info *di) |
| { |
| if (di->chip == BQ27425 || di->chip == BQ27500 || di->chip == BQ27742) |
| return true; |
| return false; |
| } |
| |
| /* |
| * Return the battery Relative State-of-Charge |
| * Or < 0 if something fails. |
| */ |
| static int bq27x00_battery_read_rsoc(struct bq27x00_device_info *di) |
| { |
| int rsoc; |
| |
| if (di->chip == BQ27500 || di->chip == BQ27742) |
| rsoc = bq27x00_read(di, BQ27500_REG_SOC, false); |
| else if (di->chip == BQ27425) |
| rsoc = bq27x00_read(di, BQ27425_REG_SOC, false); |
| else |
| rsoc = bq27x00_read(di, BQ27000_REG_RSOC, true); |
| |
| if (rsoc < 0) |
| dev_dbg(di->dev, "error reading relative State-of-Charge\n"); |
| |
| return rsoc; |
| } |
| |
| /* |
| * Return a battery charge value in µAh |
| * Or < 0 if something fails. |
| */ |
| static int bq27x00_battery_read_charge(struct bq27x00_device_info *di, u8 reg) |
| { |
| int charge; |
| |
| charge = bq27x00_read(di, reg, false); |
| if (charge < 0) { |
| dev_dbg(di->dev, "error reading charge register %02x: %d\n", |
| reg, charge); |
| return charge; |
| } |
| |
| if (bq27xxx_is_chip_version_higher(di)) |
| charge *= 1000; |
| else |
| charge = charge * 3570 / BQ27000_RS; |
| |
| return charge; |
| } |
| |
| /* |
| * Return the battery Nominal available capaciy in µAh |
| * Or < 0 if something fails. |
| */ |
| static inline int bq27x00_battery_read_nac(struct bq27x00_device_info *di) |
| { |
| int flags; |
| bool is_bq27500 = di->chip == BQ27500; |
| bool is_bq27742 = di->chip == BQ27742; |
| bool is_higher = bq27xxx_is_chip_version_higher(di); |
| bool flags_1b = !(is_bq27500 || is_bq27742); |
| |
| flags = bq27x00_read(di, BQ27x00_REG_FLAGS, flags_1b); |
| if (flags >= 0 && !is_higher && (flags & BQ27000_FLAG_CI)) |
| return -ENODATA; |
| |
| return bq27x00_battery_read_charge(di, BQ27x00_REG_NAC); |
| } |
| |
| /* |
| * Return the battery Last measured discharge in µAh |
| * Or < 0 if something fails. |
| */ |
| static inline int bq27x00_battery_read_lmd(struct bq27x00_device_info *di) |
| { |
| return bq27x00_battery_read_charge(di, BQ27x00_REG_LMD); |
| } |
| |
| /* |
| * Return the battery Initial last measured discharge in µAh |
| * Or < 0 if something fails. |
| */ |
| static int bq27x00_battery_read_ilmd(struct bq27x00_device_info *di) |
| { |
| int ilmd; |
| |
| if (bq27xxx_is_chip_version_higher(di)) |
| ilmd = bq27x00_read(di, BQ27500_REG_DCAP, false); |
| else |
| ilmd = bq27x00_read(di, BQ27000_REG_ILMD, true); |
| |
| if (ilmd < 0) { |
| dev_dbg(di->dev, "error reading initial last measured discharge\n"); |
| return ilmd; |
| } |
| |
| if (bq27xxx_is_chip_version_higher(di)) |
| ilmd *= 1000; |
| else |
| ilmd = ilmd * 256 * 3570 / BQ27000_RS; |
| |
| return ilmd; |
| } |
| |
| /* |
| * Return the battery Available energy in µWh |
| * Or < 0 if something fails. |
| */ |
| static int bq27x00_battery_read_energy(struct bq27x00_device_info *di) |
| { |
| int ae; |
| |
| ae = bq27x00_read(di, BQ27x00_REG_AE, false); |
| if (ae < 0) { |
| dev_dbg(di->dev, "error reading available energy\n"); |
| return ae; |
| } |
| |
| if (di->chip == BQ27500) |
| ae *= 1000; |
| else |
| ae = ae * 29200 / BQ27000_RS; |
| |
| return ae; |
| } |
| |
| /* |
| * Return the battery temperature in tenths of degree Kelvin |
| * Or < 0 if something fails. |
| */ |
| static int bq27x00_battery_read_temperature(struct bq27x00_device_info *di) |
| { |
| int temp; |
| |
| temp = bq27x00_read(di, BQ27x00_REG_TEMP, false); |
| if (temp < 0) { |
| dev_err(di->dev, "error reading temperature\n"); |
| return temp; |
| } |
| |
| if (!bq27xxx_is_chip_version_higher(di)) |
| temp = 5 * temp / 2; |
| |
| return temp; |
| } |
| |
| /* |
| * Return the battery Cycle count total |
| * Or < 0 if something fails. |
| */ |
| static int bq27x00_battery_read_cyct(struct bq27x00_device_info *di) |
| { |
| int cyct; |
| |
| cyct = bq27x00_read(di, BQ27x00_REG_CYCT, false); |
| if (cyct < 0) |
| dev_err(di->dev, "error reading cycle count total\n"); |
| |
| return cyct; |
| } |
| |
| /* |
| * Read a time register. |
| * Return < 0 if something fails. |
| */ |
| static int bq27x00_battery_read_time(struct bq27x00_device_info *di, u8 reg) |
| { |
| int tval; |
| |
| tval = bq27x00_read(di, reg, false); |
| if (tval < 0) { |
| dev_dbg(di->dev, "error reading time register %02x: %d\n", |
| reg, tval); |
| return tval; |
| } |
| |
| if (tval == 65535) |
| return -ENODATA; |
| |
| return tval * 60; |
| } |
| |
| /* |
| * Read a power avg register. |
| * Return < 0 if something fails. |
| */ |
| static int bq27x00_battery_read_pwr_avg(struct bq27x00_device_info *di, u8 reg) |
| { |
| int tval; |
| |
| tval = bq27x00_read(di, reg, false); |
| if (tval < 0) { |
| dev_err(di->dev, "error reading power avg rgister %02x: %d\n", |
| reg, tval); |
| return tval; |
| } |
| |
| if (di->chip == BQ27500) |
| return tval; |
| else |
| return (tval * BQ27x00_POWER_CONSTANT) / BQ27000_RS; |
| } |
| |
| /* |
| * Read flag register. |
| * Return < 0 if something fails. |
| */ |
| static int bq27x00_battery_read_health(struct bq27x00_device_info *di) |
| { |
| int tval; |
| |
| tval = bq27x00_read(di, BQ27x00_REG_FLAGS, false); |
| if (tval < 0) { |
| dev_err(di->dev, "error reading flag register:%d\n", tval); |
| return tval; |
| } |
| |
| if ((di->chip == BQ27500)) { |
| if (tval & BQ27500_FLAG_SOCF) |
| tval = POWER_SUPPLY_HEALTH_DEAD; |
| else if (tval & BQ27500_FLAG_OTC) |
| tval = POWER_SUPPLY_HEALTH_OVERHEAT; |
| else |
| tval = POWER_SUPPLY_HEALTH_GOOD; |
| return tval; |
| } else { |
| if (tval & BQ27000_FLAG_EDV1) |
| tval = POWER_SUPPLY_HEALTH_DEAD; |
| else |
| tval = POWER_SUPPLY_HEALTH_GOOD; |
| return tval; |
| } |
| |
| return -1; |
| } |
| |
| static void bq27x00_update(struct bq27x00_device_info *di) |
| { |
| struct bq27x00_reg_cache cache = {0, }; |
| bool is_bq27500 = di->chip == BQ27500; |
| bool is_bq27425 = di->chip == BQ27425; |
| bool is_bq27742 = di->chip == BQ27742; |
| bool flags_1b = !(is_bq27500 || is_bq27742); |
| |
| cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, flags_1b); |
| if ((cache.flags & 0xff) == 0xff) |
| /* read error */ |
| cache.flags = -1; |
| if (cache.flags >= 0) { |
| if (!is_bq27500 && !is_bq27425 && !is_bq27742 |
| && (cache.flags & BQ27000_FLAG_CI)) { |
| dev_info(di->dev, "battery is not calibrated! ignoring capacity values\n"); |
| cache.capacity = -ENODATA; |
| cache.energy = -ENODATA; |
| cache.time_to_empty = -ENODATA; |
| cache.time_to_empty_avg = -ENODATA; |
| cache.time_to_full = -ENODATA; |
| cache.charge_full = -ENODATA; |
| cache.health = -ENODATA; |
| } else { |
| cache.capacity = bq27x00_battery_read_rsoc(di); |
| if (is_bq27742) |
| cache.time_to_empty = |
| bq27x00_battery_read_time(di, |
| BQ27x00_REG_TTE); |
| else if (!is_bq27425) { |
| cache.energy = bq27x00_battery_read_energy(di); |
| cache.time_to_empty = |
| bq27x00_battery_read_time(di, |
| BQ27x00_REG_TTE); |
| cache.time_to_empty_avg = |
| bq27x00_battery_read_time(di, |
| BQ27x00_REG_TTECP); |
| cache.time_to_full = |
| bq27x00_battery_read_time(di, |
| BQ27x00_REG_TTF); |
| } |
| cache.charge_full = bq27x00_battery_read_lmd(di); |
| cache.health = bq27x00_battery_read_health(di); |
| } |
| cache.temperature = bq27x00_battery_read_temperature(di); |
| if (!is_bq27425) |
| cache.cycle_count = bq27x00_battery_read_cyct(di); |
| if (is_bq27742) |
| cache.power_avg = |
| bq27x00_battery_read_pwr_avg(di, |
| BQ27742_POWER_AVG); |
| else |
| cache.power_avg = |
| bq27x00_battery_read_pwr_avg(di, |
| BQ27x00_POWER_AVG); |
| |
| /* We only have to read charge design full once */ |
| if (di->charge_design_full <= 0) |
| di->charge_design_full = bq27x00_battery_read_ilmd(di); |
| } |
| |
| if (memcmp(&di->cache, &cache, sizeof(cache)) != 0) { |
| di->cache = cache; |
| power_supply_changed(&di->bat); |
| } |
| |
| di->last_update = jiffies; |
| } |
| |
| static void bq27x00_battery_poll(struct work_struct *work) |
| { |
| struct bq27x00_device_info *di = |
| container_of(work, struct bq27x00_device_info, work.work); |
| |
| bq27x00_update(di); |
| |
| if (poll_interval > 0) { |
| /* The timer does not have to be accurate. */ |
| set_timer_slack(&di->work.timer, poll_interval * HZ / 4); |
| schedule_delayed_work(&di->work, poll_interval * HZ); |
| } |
| } |
| |
| /* |
| * Return the battery average current in µA |
| * Note that current can be negative signed as well |
| * Or 0 if something fails. |
| */ |
| static int bq27x00_battery_current(struct bq27x00_device_info *di, |
| union power_supply_propval *val) |
| { |
| int curr; |
| int flags; |
| |
| curr = bq27x00_read(di, BQ27x00_REG_AI, false); |
| if (curr < 0) { |
| dev_err(di->dev, "error reading current\n"); |
| return curr; |
| } |
| |
| if (bq27xxx_is_chip_version_higher(di)) { |
| /* bq27500 returns signed value */ |
| val->intval = (int)((s16)curr) * 1000; |
| } else { |
| flags = bq27x00_read(di, BQ27x00_REG_FLAGS, false); |
| if (flags & BQ27000_FLAG_CHGS) { |
| dev_dbg(di->dev, "negative current!\n"); |
| curr = -curr; |
| } |
| |
| val->intval = curr * 3570 / BQ27000_RS; |
| } |
| |
| return 0; |
| } |
| |
| static int bq27x00_battery_status(struct bq27x00_device_info *di, |
| union power_supply_propval *val) |
| { |
| int status; |
| |
| if (bq27xxx_is_chip_version_higher(di)) { |
| if (di->cache.flags & BQ27500_FLAG_FC) |
| status = POWER_SUPPLY_STATUS_FULL; |
| else if (di->cache.flags & BQ27500_FLAG_DSC) |
| status = POWER_SUPPLY_STATUS_DISCHARGING; |
| else |
| status = POWER_SUPPLY_STATUS_CHARGING; |
| } else { |
| if (di->cache.flags & BQ27000_FLAG_FC) |
| status = POWER_SUPPLY_STATUS_FULL; |
| else if (di->cache.flags & BQ27000_FLAG_CHGS) |
| status = POWER_SUPPLY_STATUS_CHARGING; |
| else if (power_supply_am_i_supplied(&di->bat)) |
| status = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| else |
| status = POWER_SUPPLY_STATUS_DISCHARGING; |
| } |
| |
| val->intval = status; |
| |
| return 0; |
| } |
| |
| static int bq27x00_battery_capacity_level(struct bq27x00_device_info *di, |
| union power_supply_propval *val) |
| { |
| int level; |
| |
| if (bq27xxx_is_chip_version_higher(di)) { |
| if (di->cache.flags & BQ27500_FLAG_FC) |
| level = POWER_SUPPLY_CAPACITY_LEVEL_FULL; |
| else if (di->cache.flags & BQ27500_FLAG_SOC1) |
| level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; |
| else if (di->cache.flags & BQ27500_FLAG_SOCF) |
| level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; |
| else |
| level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; |
| } else { |
| if (di->cache.flags & BQ27000_FLAG_FC) |
| level = POWER_SUPPLY_CAPACITY_LEVEL_FULL; |
| else if (di->cache.flags & BQ27000_FLAG_EDV1) |
| level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; |
| else if (di->cache.flags & BQ27000_FLAG_EDVF) |
| level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; |
| else |
| level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; |
| } |
| |
| val->intval = level; |
| |
| return 0; |
| } |
| |
| /* |
| * Return the battery Voltage in millivolts |
| * Or < 0 if something fails. |
| */ |
| static int bq27x00_battery_voltage(struct bq27x00_device_info *di, |
| union power_supply_propval *val) |
| { |
| int volt; |
| |
| volt = bq27x00_read(di, BQ27x00_REG_VOLT, false); |
| if (volt < 0) { |
| dev_err(di->dev, "error reading voltage\n"); |
| return volt; |
| } |
| |
| val->intval = volt * 1000; |
| |
| return 0; |
| } |
| |
| static int bq27x00_simple_value(int value, |
| union power_supply_propval *val) |
| { |
| if (value < 0) |
| return value; |
| |
| val->intval = value; |
| |
| return 0; |
| } |
| |
| #define to_bq27x00_device_info(x) container_of((x), \ |
| struct bq27x00_device_info, bat); |
| |
| static int bq27x00_battery_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| int ret = 0; |
| struct bq27x00_device_info *di = to_bq27x00_device_info(psy); |
| |
| mutex_lock(&di->lock); |
| if (time_is_before_jiffies(di->last_update + 5 * HZ)) { |
| cancel_delayed_work_sync(&di->work); |
| bq27x00_battery_poll(&di->work.work); |
| } |
| mutex_unlock(&di->lock); |
| |
| if (psp != POWER_SUPPLY_PROP_PRESENT && di->cache.flags < 0) |
| return -ENODEV; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| ret = bq27x00_battery_status(di, val); |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| ret = bq27x00_battery_voltage(di, val); |
| break; |
| case POWER_SUPPLY_PROP_PRESENT: |
| val->intval = di->cache.flags < 0 ? 0 : 1; |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| ret = bq27x00_battery_current(di, val); |
| break; |
| case POWER_SUPPLY_PROP_CAPACITY: |
| ret = bq27x00_simple_value(di->cache.capacity, val); |
| break; |
| case POWER_SUPPLY_PROP_CAPACITY_LEVEL: |
| ret = bq27x00_battery_capacity_level(di, val); |
| break; |
| case POWER_SUPPLY_PROP_TEMP: |
| ret = bq27x00_simple_value(di->cache.temperature, val); |
| if (ret == 0) |
| val->intval -= 2731; |
| break; |
| case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: |
| ret = bq27x00_simple_value(di->cache.time_to_empty, val); |
| break; |
| case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: |
| ret = bq27x00_simple_value(di->cache.time_to_empty_avg, val); |
| break; |
| case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW: |
| ret = bq27x00_simple_value(di->cache.time_to_full, val); |
| break; |
| case POWER_SUPPLY_PROP_TECHNOLOGY: |
| val->intval = POWER_SUPPLY_TECHNOLOGY_LION; |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_NOW: |
| ret = bq27x00_simple_value(bq27x00_battery_read_nac(di), val); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_FULL: |
| ret = bq27x00_simple_value(di->cache.charge_full, val); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: |
| ret = bq27x00_simple_value(di->charge_design_full, val); |
| break; |
| case POWER_SUPPLY_PROP_CYCLE_COUNT: |
| ret = bq27x00_simple_value(di->cache.cycle_count, val); |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_NOW: |
| ret = bq27x00_simple_value(di->cache.energy, val); |
| break; |
| case POWER_SUPPLY_PROP_POWER_AVG: |
| ret = bq27x00_simple_value(di->cache.power_avg, val); |
| break; |
| case POWER_SUPPLY_PROP_HEALTH: |
| ret = bq27x00_simple_value(di->cache.health, val); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static void bq27x00_external_power_changed(struct power_supply *psy) |
| { |
| struct bq27x00_device_info *di = to_bq27x00_device_info(psy); |
| |
| cancel_delayed_work_sync(&di->work); |
| schedule_delayed_work(&di->work, 0); |
| } |
| |
| static int bq27x00_powersupply_init(struct bq27x00_device_info *di) |
| { |
| int ret; |
| |
| di->bat.type = POWER_SUPPLY_TYPE_BATTERY; |
| if (di->chip == BQ27425) { |
| di->bat.properties = bq27425_battery_props; |
| di->bat.num_properties = ARRAY_SIZE(bq27425_battery_props); |
| } else if (di->chip == BQ27742) { |
| di->bat.properties = bq27742_battery_props; |
| di->bat.num_properties = ARRAY_SIZE(bq27742_battery_props); |
| } else { |
| di->bat.properties = bq27x00_battery_props; |
| di->bat.num_properties = ARRAY_SIZE(bq27x00_battery_props); |
| } |
| di->bat.get_property = bq27x00_battery_get_property; |
| di->bat.external_power_changed = bq27x00_external_power_changed; |
| |
| INIT_DELAYED_WORK(&di->work, bq27x00_battery_poll); |
| mutex_init(&di->lock); |
| |
| ret = power_supply_register(di->dev, &di->bat); |
| if (ret) { |
| dev_err(di->dev, "failed to register battery: %d\n", ret); |
| return ret; |
| } |
| |
| dev_info(di->dev, "support ver. %s enabled\n", DRIVER_VERSION); |
| |
| bq27x00_update(di); |
| |
| return 0; |
| } |
| |
| static void bq27x00_powersupply_unregister(struct bq27x00_device_info *di) |
| { |
| /* |
| * power_supply_unregister call bq27x00_battery_get_property which |
| * call bq27x00_battery_poll. |
| * Make sure that bq27x00_battery_poll will not call |
| * schedule_delayed_work again after unregister (which cause OOPS). |
| */ |
| poll_interval = 0; |
| |
| cancel_delayed_work_sync(&di->work); |
| |
| power_supply_unregister(&di->bat); |
| |
| mutex_destroy(&di->lock); |
| } |
| |
| |
| /* i2c specific code */ |
| #ifdef CONFIG_BATTERY_BQ27X00_I2C |
| |
| /* If the system has several batteries we need a different name for each |
| * of them... |
| */ |
| static DEFINE_IDR(battery_id); |
| static DEFINE_MUTEX(battery_mutex); |
| |
| static int bq27x00_read_i2c(struct bq27x00_device_info *di, u8 reg, bool single) |
| { |
| struct i2c_client *client = to_i2c_client(di->dev); |
| struct i2c_msg msg[2]; |
| unsigned char data[2]; |
| int ret; |
| |
| if (!client->adapter) |
| return -ENODEV; |
| |
| msg[0].addr = client->addr; |
| msg[0].flags = 0; |
| msg[0].buf = ® |
| msg[0].len = sizeof(reg); |
| msg[1].addr = client->addr; |
| msg[1].flags = I2C_M_RD; |
| msg[1].buf = data; |
| if (single) |
| msg[1].len = 1; |
| else |
| msg[1].len = 2; |
| |
| ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); |
| if (ret < 0) |
| return ret; |
| |
| if (!single) |
| ret = get_unaligned_le16(data); |
| else |
| ret = data[0]; |
| |
| return ret; |
| } |
| |
| static int bq27x00_battery_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| char *name; |
| struct bq27x00_device_info *di; |
| int num; |
| int retval = 0; |
| |
| /* Get new ID for the new battery device */ |
| mutex_lock(&battery_mutex); |
| num = idr_alloc(&battery_id, client, 0, 0, GFP_KERNEL); |
| mutex_unlock(&battery_mutex); |
| if (num < 0) |
| return num; |
| |
| name = kasprintf(GFP_KERNEL, "%s-%d", id->name, num); |
| if (!name) { |
| dev_err(&client->dev, "failed to allocate device name\n"); |
| retval = -ENOMEM; |
| goto batt_failed_1; |
| } |
| |
| di = devm_kzalloc(&client->dev, sizeof(*di), GFP_KERNEL); |
| if (!di) { |
| dev_err(&client->dev, "failed to allocate device info data\n"); |
| retval = -ENOMEM; |
| goto batt_failed_2; |
| } |
| |
| di->id = num; |
| di->dev = &client->dev; |
| di->chip = id->driver_data; |
| di->bat.name = name; |
| di->bus.read = &bq27x00_read_i2c; |
| |
| retval = bq27x00_powersupply_init(di); |
| if (retval) |
| goto batt_failed_2; |
| |
| i2c_set_clientdata(client, di); |
| |
| return 0; |
| |
| batt_failed_2: |
| kfree(name); |
| batt_failed_1: |
| mutex_lock(&battery_mutex); |
| idr_remove(&battery_id, num); |
| mutex_unlock(&battery_mutex); |
| |
| return retval; |
| } |
| |
| static int bq27x00_battery_remove(struct i2c_client *client) |
| { |
| struct bq27x00_device_info *di = i2c_get_clientdata(client); |
| |
| bq27x00_powersupply_unregister(di); |
| |
| kfree(di->bat.name); |
| |
| mutex_lock(&battery_mutex); |
| idr_remove(&battery_id, di->id); |
| mutex_unlock(&battery_mutex); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id bq27x00_id[] = { |
| { "bq27200", BQ27000 }, /* bq27200 is same as bq27000, but with i2c */ |
| { "bq27500", BQ27500 }, |
| { "bq27425", BQ27425 }, |
| { "bq27742", BQ27742 }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(i2c, bq27x00_id); |
| |
| static struct i2c_driver bq27x00_battery_driver = { |
| .driver = { |
| .name = "bq27x00-battery", |
| }, |
| .probe = bq27x00_battery_probe, |
| .remove = bq27x00_battery_remove, |
| .id_table = bq27x00_id, |
| }; |
| |
| static inline int bq27x00_battery_i2c_init(void) |
| { |
| int ret = i2c_add_driver(&bq27x00_battery_driver); |
| if (ret) |
| printk(KERN_ERR "Unable to register BQ27x00 i2c driver\n"); |
| |
| return ret; |
| } |
| |
| static inline void bq27x00_battery_i2c_exit(void) |
| { |
| i2c_del_driver(&bq27x00_battery_driver); |
| } |
| |
| #else |
| |
| static inline int bq27x00_battery_i2c_init(void) { return 0; } |
| static inline void bq27x00_battery_i2c_exit(void) {}; |
| |
| #endif |
| |
| /* platform specific code */ |
| #ifdef CONFIG_BATTERY_BQ27X00_PLATFORM |
| |
| static int bq27000_read_platform(struct bq27x00_device_info *di, u8 reg, |
| bool single) |
| { |
| struct device *dev = di->dev; |
| struct bq27000_platform_data *pdata = dev->platform_data; |
| unsigned int timeout = 3; |
| int upper, lower; |
| int temp; |
| |
| if (!single) { |
| /* Make sure the value has not changed in between reading the |
| * lower and the upper part */ |
| upper = pdata->read(dev, reg + 1); |
| do { |
| temp = upper; |
| if (upper < 0) |
| return upper; |
| |
| lower = pdata->read(dev, reg); |
| if (lower < 0) |
| return lower; |
| |
| upper = pdata->read(dev, reg + 1); |
| } while (temp != upper && --timeout); |
| |
| if (timeout == 0) |
| return -EIO; |
| |
| return (upper << 8) | lower; |
| } |
| |
| return pdata->read(dev, reg); |
| } |
| |
| static int bq27000_battery_probe(struct platform_device *pdev) |
| { |
| struct bq27x00_device_info *di; |
| struct bq27000_platform_data *pdata = pdev->dev.platform_data; |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "no platform_data supplied\n"); |
| return -EINVAL; |
| } |
| |
| if (!pdata->read) { |
| dev_err(&pdev->dev, "no hdq read callback supplied\n"); |
| return -EINVAL; |
| } |
| |
| di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); |
| if (!di) { |
| dev_err(&pdev->dev, "failed to allocate device info data\n"); |
| return -ENOMEM; |
| } |
| |
| platform_set_drvdata(pdev, di); |
| |
| di->dev = &pdev->dev; |
| di->chip = BQ27000; |
| |
| di->bat.name = pdata->name ?: dev_name(&pdev->dev); |
| di->bus.read = &bq27000_read_platform; |
| |
| return bq27x00_powersupply_init(di); |
| } |
| |
| static int bq27000_battery_remove(struct platform_device *pdev) |
| { |
| struct bq27x00_device_info *di = platform_get_drvdata(pdev); |
| |
| bq27x00_powersupply_unregister(di); |
| |
| return 0; |
| } |
| |
| static struct platform_driver bq27000_battery_driver = { |
| .probe = bq27000_battery_probe, |
| .remove = bq27000_battery_remove, |
| .driver = { |
| .name = "bq27000-battery", |
| }, |
| }; |
| |
| static inline int bq27x00_battery_platform_init(void) |
| { |
| int ret = platform_driver_register(&bq27000_battery_driver); |
| if (ret) |
| printk(KERN_ERR "Unable to register BQ27000 platform driver\n"); |
| |
| return ret; |
| } |
| |
| static inline void bq27x00_battery_platform_exit(void) |
| { |
| platform_driver_unregister(&bq27000_battery_driver); |
| } |
| |
| #else |
| |
| static inline int bq27x00_battery_platform_init(void) { return 0; } |
| static inline void bq27x00_battery_platform_exit(void) {}; |
| |
| #endif |
| |
| /* |
| * Module stuff |
| */ |
| |
| static int __init bq27x00_battery_init(void) |
| { |
| int ret; |
| |
| ret = bq27x00_battery_i2c_init(); |
| if (ret) |
| return ret; |
| |
| ret = bq27x00_battery_platform_init(); |
| if (ret) |
| bq27x00_battery_i2c_exit(); |
| |
| return ret; |
| } |
| module_init(bq27x00_battery_init); |
| |
| static void __exit bq27x00_battery_exit(void) |
| { |
| bq27x00_battery_platform_exit(); |
| bq27x00_battery_i2c_exit(); |
| } |
| module_exit(bq27x00_battery_exit); |
| |
| MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); |
| MODULE_DESCRIPTION("BQ27x00 battery monitor driver"); |
| MODULE_LICENSE("GPL"); |