| /* |
| * f_rndis.c -- RNDIS link function driver |
| * |
| * Copyright (C) 2003-2005,2008 David Brownell |
| * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger |
| * Copyright (C) 2008 Nokia Corporation |
| * Copyright (C) 2009 Samsung Electronics |
| * Author: Michal Nazarewicz (m.nazarewicz@samsung.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| /* #define VERBOSE_DEBUG */ |
| |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/etherdevice.h> |
| |
| #include <asm/atomic.h> |
| |
| #include "u_ether.h" |
| #include "rndis.h" |
| |
| |
| /* |
| * This function is an RNDIS Ethernet port -- a Microsoft protocol that's |
| * been promoted instead of the standard CDC Ethernet. The published RNDIS |
| * spec is ambiguous, incomplete, and needlessly complex. Variants such as |
| * ActiveSync have even worse status in terms of specification. |
| * |
| * In short: it's a protocol controlled by (and for) Microsoft, not for an |
| * Open ecosystem or markets. Linux supports it *only* because Microsoft |
| * doesn't support the CDC Ethernet standard. |
| * |
| * The RNDIS data transfer model is complex, with multiple Ethernet packets |
| * per USB message, and out of band data. The control model is built around |
| * what's essentially an "RNDIS RPC" protocol. It's all wrapped in a CDC ACM |
| * (modem, not Ethernet) veneer, with those ACM descriptors being entirely |
| * useless (they're ignored). RNDIS expects to be the only function in its |
| * configuration, so it's no real help if you need composite devices; and |
| * it expects to be the first configuration too. |
| * |
| * There is a single technical advantage of RNDIS over CDC Ethernet, if you |
| * discount the fluff that its RPC can be made to deliver: it doesn't need |
| * a NOP altsetting for the data interface. That lets it work on some of the |
| * "so smart it's stupid" hardware which takes over configuration changes |
| * from the software, and adds restrictions like "no altsettings". |
| * |
| * Unfortunately MSFT's RNDIS drivers are buggy. They hang or oops, and |
| * have all sorts of contrary-to-specification oddities that can prevent |
| * them from working sanely. Since bugfixes (or accurate specs, letting |
| * Linux work around those bugs) are unlikely to ever come from MSFT, you |
| * may want to avoid using RNDIS on purely operational grounds. |
| * |
| * Omissions from the RNDIS 1.0 specification include: |
| * |
| * - Power management ... references data that's scattered around lots |
| * of other documentation, which is incorrect/incomplete there too. |
| * |
| * - There are various undocumented protocol requirements, like the need |
| * to send garbage in some control-OUT messages. |
| * |
| * - MS-Windows drivers sometimes emit undocumented requests. |
| */ |
| |
| struct rndis_ep_descs { |
| struct usb_endpoint_descriptor *in; |
| struct usb_endpoint_descriptor *out; |
| struct usb_endpoint_descriptor *notify; |
| }; |
| |
| struct f_rndis { |
| struct gether port; |
| u8 ctrl_id, data_id; |
| u8 ethaddr[ETH_ALEN]; |
| int config; |
| |
| struct rndis_ep_descs fs; |
| struct rndis_ep_descs hs; |
| |
| struct usb_ep *notify; |
| struct usb_endpoint_descriptor *notify_desc; |
| struct usb_request *notify_req; |
| atomic_t notify_count; |
| }; |
| |
| static inline struct f_rndis *func_to_rndis(struct usb_function *f) |
| { |
| return container_of(f, struct f_rndis, port.func); |
| } |
| |
| /* peak (theoretical) bulk transfer rate in bits-per-second */ |
| static unsigned int bitrate(struct usb_gadget *g) |
| { |
| if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) |
| return 13 * 512 * 8 * 1000 * 8; |
| else |
| return 19 * 64 * 1 * 1000 * 8; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| */ |
| |
| #define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */ |
| #define STATUS_BYTECOUNT 8 /* 8 bytes data */ |
| |
| |
| /* interface descriptor: */ |
| |
| static struct usb_interface_descriptor rndis_control_intf __initdata = { |
| .bLength = sizeof rndis_control_intf, |
| .bDescriptorType = USB_DT_INTERFACE, |
| |
| /* .bInterfaceNumber = DYNAMIC */ |
| /* status endpoint is optional; this could be patched later */ |
| .bNumEndpoints = 1, |
| .bInterfaceClass = USB_CLASS_COMM, |
| .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM, |
| .bInterfaceProtocol = USB_CDC_ACM_PROTO_VENDOR, |
| /* .iInterface = DYNAMIC */ |
| }; |
| |
| static struct usb_cdc_header_desc header_desc __initdata = { |
| .bLength = sizeof header_desc, |
| .bDescriptorType = USB_DT_CS_INTERFACE, |
| .bDescriptorSubType = USB_CDC_HEADER_TYPE, |
| |
| .bcdCDC = cpu_to_le16(0x0110), |
| }; |
| |
| static struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor __initdata = { |
| .bLength = sizeof call_mgmt_descriptor, |
| .bDescriptorType = USB_DT_CS_INTERFACE, |
| .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE, |
| |
| .bmCapabilities = 0x00, |
| .bDataInterface = 0x01, |
| }; |
| |
| static struct usb_cdc_acm_descriptor rndis_acm_descriptor __initdata = { |
| .bLength = sizeof rndis_acm_descriptor, |
| .bDescriptorType = USB_DT_CS_INTERFACE, |
| .bDescriptorSubType = USB_CDC_ACM_TYPE, |
| |
| .bmCapabilities = 0x00, |
| }; |
| |
| static struct usb_cdc_union_desc rndis_union_desc __initdata = { |
| .bLength = sizeof(rndis_union_desc), |
| .bDescriptorType = USB_DT_CS_INTERFACE, |
| .bDescriptorSubType = USB_CDC_UNION_TYPE, |
| /* .bMasterInterface0 = DYNAMIC */ |
| /* .bSlaveInterface0 = DYNAMIC */ |
| }; |
| |
| /* the data interface has two bulk endpoints */ |
| |
| static struct usb_interface_descriptor rndis_data_intf __initdata = { |
| .bLength = sizeof rndis_data_intf, |
| .bDescriptorType = USB_DT_INTERFACE, |
| |
| /* .bInterfaceNumber = DYNAMIC */ |
| .bNumEndpoints = 2, |
| .bInterfaceClass = USB_CLASS_CDC_DATA, |
| .bInterfaceSubClass = 0, |
| .bInterfaceProtocol = 0, |
| /* .iInterface = DYNAMIC */ |
| }; |
| |
| |
| static struct usb_interface_assoc_descriptor |
| rndis_iad_descriptor = { |
| .bLength = sizeof rndis_iad_descriptor, |
| .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION, |
| |
| .bFirstInterface = 0, /* XXX, hardcoded */ |
| .bInterfaceCount = 2, // control + data |
| .bFunctionClass = USB_CLASS_COMM, |
| .bFunctionSubClass = USB_CDC_SUBCLASS_ETHERNET, |
| .bFunctionProtocol = USB_CDC_PROTO_NONE, |
| /* .iFunction = DYNAMIC */ |
| }; |
| |
| /* full speed support: */ |
| |
| static struct usb_endpoint_descriptor fs_notify_desc __initdata = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_INT, |
| .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), |
| .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC, |
| }; |
| |
| static struct usb_endpoint_descriptor fs_in_desc __initdata = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_endpoint_descriptor fs_out_desc __initdata = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_descriptor_header *eth_fs_function[] __initdata = { |
| (struct usb_descriptor_header *) &rndis_iad_descriptor, |
| /* control interface matches ACM, not Ethernet */ |
| (struct usb_descriptor_header *) &rndis_control_intf, |
| (struct usb_descriptor_header *) &header_desc, |
| (struct usb_descriptor_header *) &call_mgmt_descriptor, |
| (struct usb_descriptor_header *) &rndis_acm_descriptor, |
| (struct usb_descriptor_header *) &rndis_union_desc, |
| (struct usb_descriptor_header *) &fs_notify_desc, |
| /* data interface has no altsetting */ |
| (struct usb_descriptor_header *) &rndis_data_intf, |
| (struct usb_descriptor_header *) &fs_in_desc, |
| (struct usb_descriptor_header *) &fs_out_desc, |
| NULL, |
| }; |
| |
| /* high speed support: */ |
| |
| static struct usb_endpoint_descriptor hs_notify_desc __initdata = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_INT, |
| .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), |
| .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, |
| }; |
| static struct usb_endpoint_descriptor hs_in_desc __initdata = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| |
| static struct usb_endpoint_descriptor hs_out_desc __initdata = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| |
| static struct usb_descriptor_header *eth_hs_function[] __initdata = { |
| (struct usb_descriptor_header *) &rndis_iad_descriptor, |
| /* control interface matches ACM, not Ethernet */ |
| (struct usb_descriptor_header *) &rndis_control_intf, |
| (struct usb_descriptor_header *) &header_desc, |
| (struct usb_descriptor_header *) &call_mgmt_descriptor, |
| (struct usb_descriptor_header *) &rndis_acm_descriptor, |
| (struct usb_descriptor_header *) &rndis_union_desc, |
| (struct usb_descriptor_header *) &hs_notify_desc, |
| /* data interface has no altsetting */ |
| (struct usb_descriptor_header *) &rndis_data_intf, |
| (struct usb_descriptor_header *) &hs_in_desc, |
| (struct usb_descriptor_header *) &hs_out_desc, |
| NULL, |
| }; |
| |
| /* string descriptors: */ |
| |
| static struct usb_string rndis_string_defs[] = { |
| [0].s = "RNDIS Communications Control", |
| [1].s = "RNDIS Ethernet Data", |
| [2].s = "RNDIS", |
| { } /* end of list */ |
| }; |
| |
| static struct usb_gadget_strings rndis_string_table = { |
| .language = 0x0409, /* en-us */ |
| .strings = rndis_string_defs, |
| }; |
| |
| static struct usb_gadget_strings *rndis_strings[] = { |
| &rndis_string_table, |
| NULL, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static struct sk_buff *rndis_add_header(struct gether *port, |
| struct sk_buff *skb) |
| { |
| struct sk_buff *skb2; |
| |
| skb2 = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type)); |
| if (skb2) |
| rndis_add_hdr(skb2); |
| |
| dev_kfree_skb_any(skb); |
| return skb2; |
| } |
| |
| static void rndis_response_available(void *_rndis) |
| { |
| struct f_rndis *rndis = _rndis; |
| struct usb_request *req = rndis->notify_req; |
| struct usb_composite_dev *cdev = rndis->port.func.config->cdev; |
| __le32 *data = req->buf; |
| int status; |
| |
| if (atomic_inc_return(&rndis->notify_count) != 1) |
| return; |
| |
| /* Send RNDIS RESPONSE_AVAILABLE notification; a |
| * USB_CDC_NOTIFY_RESPONSE_AVAILABLE "should" work too |
| * |
| * This is the only notification defined by RNDIS. |
| */ |
| data[0] = cpu_to_le32(1); |
| data[1] = cpu_to_le32(0); |
| |
| status = usb_ep_queue(rndis->notify, req, GFP_ATOMIC); |
| if (status) { |
| atomic_dec(&rndis->notify_count); |
| DBG(cdev, "notify/0 --> %d\n", status); |
| } |
| } |
| |
| static void rndis_response_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct f_rndis *rndis = req->context; |
| struct usb_composite_dev *cdev = rndis->port.func.config->cdev; |
| int status = req->status; |
| |
| /* after TX: |
| * - USB_CDC_GET_ENCAPSULATED_RESPONSE (ep0/control) |
| * - RNDIS_RESPONSE_AVAILABLE (status/irq) |
| */ |
| switch (status) { |
| case -ECONNRESET: |
| case -ESHUTDOWN: |
| /* connection gone */ |
| atomic_set(&rndis->notify_count, 0); |
| break; |
| default: |
| DBG(cdev, "RNDIS %s response error %d, %d/%d\n", |
| ep->name, status, |
| req->actual, req->length); |
| /* FALLTHROUGH */ |
| case 0: |
| if (ep != rndis->notify) |
| break; |
| |
| /* handle multiple pending RNDIS_RESPONSE_AVAILABLE |
| * notifications by resending until we're done |
| */ |
| if (atomic_dec_and_test(&rndis->notify_count)) |
| break; |
| status = usb_ep_queue(rndis->notify, req, GFP_ATOMIC); |
| if (status) { |
| atomic_dec(&rndis->notify_count); |
| DBG(cdev, "notify/1 --> %d\n", status); |
| } |
| break; |
| } |
| } |
| |
| static void rndis_command_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct f_rndis *rndis = req->context; |
| struct usb_composite_dev *cdev = rndis->port.func.config->cdev; |
| int status; |
| |
| /* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */ |
| // spin_lock(&dev->lock); |
| status = rndis_msg_parser(rndis->config, (u8 *) req->buf); |
| if (status < 0) |
| ERROR(cdev, "RNDIS command error %d, %d/%d\n", |
| status, req->actual, req->length); |
| // spin_unlock(&dev->lock); |
| } |
| |
| static int |
| rndis_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) |
| { |
| struct f_rndis *rndis = func_to_rndis(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| struct usb_request *req = cdev->req; |
| int value = -EOPNOTSUPP; |
| u16 w_index = le16_to_cpu(ctrl->wIndex); |
| u16 w_value = le16_to_cpu(ctrl->wValue); |
| u16 w_length = le16_to_cpu(ctrl->wLength); |
| |
| /* composite driver infrastructure handles everything except |
| * CDC class messages; interface activation uses set_alt(). |
| */ |
| switch ((ctrl->bRequestType << 8) | ctrl->bRequest) { |
| |
| /* RNDIS uses the CDC command encapsulation mechanism to implement |
| * an RPC scheme, with much getting/setting of attributes by OID. |
| */ |
| case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) |
| | USB_CDC_SEND_ENCAPSULATED_COMMAND: |
| if (w_length > req->length || w_value |
| || w_index != rndis->ctrl_id) |
| goto invalid; |
| /* read the request; process it later */ |
| value = w_length; |
| req->complete = rndis_command_complete; |
| req->context = rndis; |
| /* later, rndis_response_available() sends a notification */ |
| break; |
| |
| case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) |
| | USB_CDC_GET_ENCAPSULATED_RESPONSE: |
| if (w_value || w_index != rndis->ctrl_id) |
| goto invalid; |
| else { |
| u8 *buf; |
| u32 n; |
| |
| /* return the result */ |
| buf = rndis_get_next_response(rndis->config, &n); |
| if (buf) { |
| memcpy(req->buf, buf, n); |
| req->complete = rndis_response_complete; |
| rndis_free_response(rndis->config, buf); |
| value = n; |
| } |
| /* else stalls ... spec says to avoid that */ |
| } |
| break; |
| |
| default: |
| invalid: |
| VDBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| w_value, w_index, w_length); |
| } |
| |
| /* respond with data transfer or status phase? */ |
| if (value >= 0) { |
| DBG(cdev, "rndis req%02x.%02x v%04x i%04x l%d\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| w_value, w_index, w_length); |
| req->zero = (value < w_length); |
| req->length = value; |
| value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); |
| if (value < 0) |
| ERROR(cdev, "rndis response on err %d\n", value); |
| } |
| |
| /* device either stalls (value < 0) or reports success */ |
| return value; |
| } |
| |
| |
| static int rndis_set_alt(struct usb_function *f, unsigned intf, unsigned alt) |
| { |
| struct f_rndis *rndis = func_to_rndis(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| |
| /* we know alt == 0 */ |
| |
| if (intf == rndis->ctrl_id) { |
| if (rndis->notify->driver_data) { |
| VDBG(cdev, "reset rndis control %d\n", intf); |
| usb_ep_disable(rndis->notify); |
| } else { |
| VDBG(cdev, "init rndis ctrl %d\n", intf); |
| rndis->notify_desc = ep_choose(cdev->gadget, |
| rndis->hs.notify, |
| rndis->fs.notify); |
| } |
| usb_ep_enable(rndis->notify, rndis->notify_desc); |
| rndis->notify->driver_data = rndis; |
| |
| } else if (intf == rndis->data_id) { |
| struct net_device *net; |
| |
| if (rndis->port.in_ep->driver_data) { |
| DBG(cdev, "reset rndis\n"); |
| gether_disconnect(&rndis->port); |
| } |
| |
| if (!rndis->port.in) { |
| DBG(cdev, "init rndis\n"); |
| rndis->port.in = ep_choose(cdev->gadget, |
| rndis->hs.in, rndis->fs.in); |
| rndis->port.out = ep_choose(cdev->gadget, |
| rndis->hs.out, rndis->fs.out); |
| } |
| |
| /* Avoid ZLPs; they can be troublesome. */ |
| rndis->port.is_zlp_ok = false; |
| |
| /* RNDIS should be in the "RNDIS uninitialized" state, |
| * either never activated or after rndis_uninit(). |
| * |
| * We don't want data to flow here until a nonzero packet |
| * filter is set, at which point it enters "RNDIS data |
| * initialized" state ... but we do want the endpoints |
| * to be activated. It's a strange little state. |
| * |
| * REVISIT the RNDIS gadget code has done this wrong for a |
| * very long time. We need another call to the link layer |
| * code -- gether_updown(...bool) maybe -- to do it right. |
| */ |
| rndis->port.cdc_filter = 0; |
| |
| DBG(cdev, "RNDIS RX/TX early activation ... \n"); |
| net = gether_connect(&rndis->port); |
| if (IS_ERR(net)) |
| return PTR_ERR(net); |
| |
| rndis_set_param_dev(rndis->config, net, |
| &rndis->port.cdc_filter); |
| } else |
| goto fail; |
| |
| return 0; |
| fail: |
| return -EINVAL; |
| } |
| |
| static void rndis_disable(struct usb_function *f) |
| { |
| struct f_rndis *rndis = func_to_rndis(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| |
| if (!rndis->notify->driver_data) |
| return; |
| |
| DBG(cdev, "rndis deactivated\n"); |
| |
| rndis_uninit(rndis->config); |
| gether_disconnect(&rndis->port); |
| |
| usb_ep_disable(rndis->notify); |
| rndis->notify->driver_data = NULL; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * This isn't quite the same mechanism as CDC Ethernet, since the |
| * notification scheme passes less data, but the same set of link |
| * states must be tested. A key difference is that altsettings are |
| * not used to tell whether the link should send packets or not. |
| */ |
| |
| static void rndis_open(struct gether *geth) |
| { |
| struct f_rndis *rndis = func_to_rndis(&geth->func); |
| struct usb_composite_dev *cdev = geth->func.config->cdev; |
| |
| DBG(cdev, "%s\n", __func__); |
| |
| rndis_set_param_medium(rndis->config, NDIS_MEDIUM_802_3, |
| bitrate(cdev->gadget) / 100); |
| rndis_signal_connect(rndis->config); |
| } |
| |
| static void rndis_close(struct gether *geth) |
| { |
| struct f_rndis *rndis = func_to_rndis(&geth->func); |
| |
| DBG(geth->func.config->cdev, "%s\n", __func__); |
| |
| rndis_set_param_medium(rndis->config, NDIS_MEDIUM_802_3, 0); |
| rndis_signal_disconnect(rndis->config); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* ethernet function driver setup/binding */ |
| |
| static int __init |
| rndis_bind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct usb_composite_dev *cdev = c->cdev; |
| struct f_rndis *rndis = func_to_rndis(f); |
| int status; |
| struct usb_ep *ep; |
| |
| /* allocate instance-specific interface IDs */ |
| status = usb_interface_id(c, f); |
| if (status < 0) |
| goto fail; |
| rndis->ctrl_id = status; |
| rndis_iad_descriptor.bFirstInterface = status; |
| |
| rndis_control_intf.bInterfaceNumber = status; |
| rndis_union_desc.bMasterInterface0 = status; |
| |
| status = usb_interface_id(c, f); |
| if (status < 0) |
| goto fail; |
| rndis->data_id = status; |
| |
| rndis_data_intf.bInterfaceNumber = status; |
| rndis_union_desc.bSlaveInterface0 = status; |
| |
| status = -ENODEV; |
| |
| /* allocate instance-specific endpoints */ |
| ep = usb_ep_autoconfig(cdev->gadget, &fs_in_desc); |
| if (!ep) |
| goto fail; |
| rndis->port.in_ep = ep; |
| ep->driver_data = cdev; /* claim */ |
| |
| ep = usb_ep_autoconfig(cdev->gadget, &fs_out_desc); |
| if (!ep) |
| goto fail; |
| rndis->port.out_ep = ep; |
| ep->driver_data = cdev; /* claim */ |
| |
| /* NOTE: a status/notification endpoint is, strictly speaking, |
| * optional. We don't treat it that way though! It's simpler, |
| * and some newer profiles don't treat it as optional. |
| */ |
| ep = usb_ep_autoconfig(cdev->gadget, &fs_notify_desc); |
| if (!ep) |
| goto fail; |
| rndis->notify = ep; |
| ep->driver_data = cdev; /* claim */ |
| |
| status = -ENOMEM; |
| |
| /* allocate notification request and buffer */ |
| rndis->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL); |
| if (!rndis->notify_req) |
| goto fail; |
| rndis->notify_req->buf = kmalloc(STATUS_BYTECOUNT, GFP_KERNEL); |
| if (!rndis->notify_req->buf) |
| goto fail; |
| rndis->notify_req->length = STATUS_BYTECOUNT; |
| rndis->notify_req->context = rndis; |
| rndis->notify_req->complete = rndis_response_complete; |
| |
| /* copy descriptors, and track endpoint copies */ |
| f->descriptors = usb_copy_descriptors(eth_fs_function); |
| if (!f->descriptors) |
| goto fail; |
| |
| rndis->fs.in = usb_find_endpoint(eth_fs_function, |
| f->descriptors, &fs_in_desc); |
| rndis->fs.out = usb_find_endpoint(eth_fs_function, |
| f->descriptors, &fs_out_desc); |
| rndis->fs.notify = usb_find_endpoint(eth_fs_function, |
| f->descriptors, &fs_notify_desc); |
| |
| /* support all relevant hardware speeds... we expect that when |
| * hardware is dual speed, all bulk-capable endpoints work at |
| * both speeds |
| */ |
| if (gadget_is_dualspeed(c->cdev->gadget)) { |
| hs_in_desc.bEndpointAddress = |
| fs_in_desc.bEndpointAddress; |
| hs_out_desc.bEndpointAddress = |
| fs_out_desc.bEndpointAddress; |
| hs_notify_desc.bEndpointAddress = |
| fs_notify_desc.bEndpointAddress; |
| |
| /* copy descriptors, and track endpoint copies */ |
| f->hs_descriptors = usb_copy_descriptors(eth_hs_function); |
| |
| if (!f->hs_descriptors) |
| goto fail; |
| |
| rndis->hs.in = usb_find_endpoint(eth_hs_function, |
| f->hs_descriptors, &hs_in_desc); |
| rndis->hs.out = usb_find_endpoint(eth_hs_function, |
| f->hs_descriptors, &hs_out_desc); |
| rndis->hs.notify = usb_find_endpoint(eth_hs_function, |
| f->hs_descriptors, &hs_notify_desc); |
| } |
| |
| rndis->port.open = rndis_open; |
| rndis->port.close = rndis_close; |
| |
| status = rndis_register(rndis_response_available, rndis); |
| if (status < 0) |
| goto fail; |
| rndis->config = status; |
| |
| rndis_set_param_medium(rndis->config, NDIS_MEDIUM_802_3, 0); |
| rndis_set_host_mac(rndis->config, rndis->ethaddr); |
| |
| #if 0 |
| // FIXME |
| if (rndis_set_param_vendor(rndis->config, vendorID, |
| manufacturer)) |
| goto fail0; |
| #endif |
| |
| /* NOTE: all that is done without knowing or caring about |
| * the network link ... which is unavailable to this code |
| * until we're activated via set_alt(). |
| */ |
| |
| DBG(cdev, "RNDIS: %s speed IN/%s OUT/%s NOTIFY/%s\n", |
| gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", |
| rndis->port.in_ep->name, rndis->port.out_ep->name, |
| rndis->notify->name); |
| return 0; |
| |
| fail: |
| if (gadget_is_dualspeed(c->cdev->gadget) && f->hs_descriptors) |
| usb_free_descriptors(f->hs_descriptors); |
| if (f->descriptors) |
| usb_free_descriptors(f->descriptors); |
| |
| if (rndis->notify_req) { |
| kfree(rndis->notify_req->buf); |
| usb_ep_free_request(rndis->notify, rndis->notify_req); |
| } |
| |
| /* we might as well release our claims on endpoints */ |
| if (rndis->notify) |
| rndis->notify->driver_data = NULL; |
| if (rndis->port.out) |
| rndis->port.out_ep->driver_data = NULL; |
| if (rndis->port.in) |
| rndis->port.in_ep->driver_data = NULL; |
| |
| ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); |
| |
| return status; |
| } |
| |
| static void |
| rndis_unbind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct f_rndis *rndis = func_to_rndis(f); |
| |
| rndis_deregister(rndis->config); |
| rndis_exit(); |
| |
| if (gadget_is_dualspeed(c->cdev->gadget)) |
| usb_free_descriptors(f->hs_descriptors); |
| usb_free_descriptors(f->descriptors); |
| |
| kfree(rndis->notify_req->buf); |
| usb_ep_free_request(rndis->notify, rndis->notify_req); |
| |
| kfree(rndis); |
| } |
| |
| /* Some controllers can't support RNDIS ... */ |
| static inline bool can_support_rndis(struct usb_configuration *c) |
| { |
| /* everything else is *presumably* fine */ |
| return true; |
| } |
| |
| /** |
| * rndis_bind_config - add RNDIS network link to a configuration |
| * @c: the configuration to support the network link |
| * @ethaddr: a buffer in which the ethernet address of the host side |
| * side of the link was recorded |
| * Context: single threaded during gadget setup |
| * |
| * Returns zero on success, else negative errno. |
| * |
| * Caller must have called @gether_setup(). Caller is also responsible |
| * for calling @gether_cleanup() before module unload. |
| */ |
| int __init rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) |
| { |
| struct f_rndis *rndis; |
| int status; |
| |
| if (!can_support_rndis(c) || !ethaddr) |
| return -EINVAL; |
| |
| /* maybe allocate device-global string IDs */ |
| if (rndis_string_defs[0].id == 0) { |
| |
| /* ... and setup RNDIS itself */ |
| status = rndis_init(); |
| if (status < 0) |
| return status; |
| |
| /* control interface label */ |
| status = usb_string_id(c->cdev); |
| if (status < 0) |
| return status; |
| rndis_string_defs[0].id = status; |
| rndis_control_intf.iInterface = status; |
| |
| /* data interface label */ |
| status = usb_string_id(c->cdev); |
| if (status < 0) |
| return status; |
| rndis_string_defs[1].id = status; |
| rndis_data_intf.iInterface = status; |
| |
| /* IAD iFunction label */ |
| status = usb_string_id(c->cdev); |
| if (status < 0) |
| return status; |
| rndis_string_defs[2].id = status; |
| rndis_iad_descriptor.iFunction = status; |
| } |
| |
| /* allocate and initialize one new instance */ |
| status = -ENOMEM; |
| rndis = kzalloc(sizeof *rndis, GFP_KERNEL); |
| if (!rndis) |
| goto fail; |
| |
| memcpy(rndis->ethaddr, ethaddr, ETH_ALEN); |
| |
| /* RNDIS activates when the host changes this filter */ |
| rndis->port.cdc_filter = 0; |
| |
| /* RNDIS has special (and complex) framing */ |
| rndis->port.header_len = sizeof(struct rndis_packet_msg_type); |
| rndis->port.wrap = rndis_add_header; |
| rndis->port.unwrap = rndis_rm_hdr; |
| |
| rndis->port.func.name = "rndis"; |
| rndis->port.func.strings = rndis_strings; |
| /* descriptors are per-instance copies */ |
| rndis->port.func.bind = rndis_bind; |
| rndis->port.func.unbind = rndis_unbind; |
| rndis->port.func.set_alt = rndis_set_alt; |
| rndis->port.func.setup = rndis_setup; |
| rndis->port.func.disable = rndis_disable; |
| |
| status = usb_add_function(c, &rndis->port.func); |
| if (status) { |
| kfree(rndis); |
| fail: |
| rndis_exit(); |
| } |
| return status; |
| } |