usb: PS3 EHCI HC reset work-around
PS3 EHCI HC errata fix 316 - The PS3 EHCI HC will reset its
internal INSNREGXX setup regs back to the chip default values
on Host Controller Reset (CMD_RESET) or Light Host Controller
Reset (CMD_LRESET). The work-around for this is for the HC
driver to re-initialise these regs when ever the HC is reset.
Adds a new helper routine ps3_ehci_setup_insnreg() which is
called from ps3_ehci_hc_reset().
Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 2dc32da..a20e496 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -21,6 +21,34 @@
#include <asm/firmware.h>
#include <asm/ps3.h>
+static void ps3_ehci_setup_insnreg(struct ehci_hcd *ehci)
+{
+ /* PS3 HC internal setup register offsets. */
+
+ enum ps3_ehci_hc_insnreg {
+ ps3_ehci_hc_insnreg01 = 0x084,
+ ps3_ehci_hc_insnreg02 = 0x088,
+ ps3_ehci_hc_insnreg03 = 0x08c,
+ };
+
+ /* PS3 EHCI HC errata fix 316 - The PS3 EHCI HC will reset its
+ * internal INSNREGXX setup regs back to the chip default values
+ * on Host Controller Reset (CMD_RESET) or Light Host Controller
+ * Reset (CMD_LRESET). The work-around for this is for the HC
+ * driver to re-initialise these regs when ever the HC is reset.
+ */
+
+ /* Set burst transfer counts to 256 out, 32 in. */
+
+ writel_be(0x01000020, (void __iomem *)ehci->regs +
+ ps3_ehci_hc_insnreg01);
+
+ /* Enable burst transfer counts. */
+
+ writel_be(0x00000001, (void __iomem *)ehci->regs +
+ ps3_ehci_hc_insnreg03);
+}
+
static int ps3_ehci_hc_reset(struct usb_hcd *hcd)
{
int result;
@@ -49,6 +77,8 @@
ehci_reset(ehci);
+ ps3_ehci_setup_insnreg(ehci);
+
return result;
}