ARM: dts: add initial VF610 Cosmic/Cosmic+ board support
Add initial PHYTEC VF610 Cosmic/Cosmic+ board support with
UART and FEC enabled.
Signed-off-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e95af3f..c703da2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -142,6 +142,7 @@
imx6q-sbc6x.dtb \
imx6q-wandboard.dtb \
imx6sl-evk.dtb \
+ vf610-cosmic.dtb \
vf610-twr.dtb
dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx23-olinuxino.dtb \
diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts
new file mode 100644
index 0000000..c42e4f9
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-cosmic.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "PHYTEC Cosmic/Cosmic+ Board";
+ compatible = "phytec,vf610-cosmic", "fsl,vf610";
+
+ chosen {
+ bootargs = "console=ttyLP1,115200";
+ };
+
+ memory {
+ reg = <0x80000000 0x10000000>;
+ };
+
+ clocks {
+ enet_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1_1>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ status = "okay";
+};