[media] adv7842: adjust gain and offset for DVI-D signals
If the input signal is DVI-D and quantization range is RGB full range,
gain and offset must be adjusted to get the right range on the output.
Copied and adopted from adv7604.
Signed-off-by: Martin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
index 1effc21..f7a4d79 100644
--- a/drivers/media/i2c/adv7842.c
+++ b/drivers/media/i2c/adv7842.c
@@ -546,6 +546,14 @@
/* ----------------------------------------------------------------------- */
+static inline bool is_analog_input(struct v4l2_subdev *sd)
+{
+ struct adv7842_state *state = to_state(sd);
+
+ return ((state->mode == ADV7842_MODE_RGB) ||
+ (state->mode == ADV7842_MODE_COMP));
+}
+
static inline bool is_digital_input(struct v4l2_subdev *sd)
{
struct adv7842_state *state = to_state(sd);
@@ -1027,12 +1035,72 @@
cp_write(sd, 0xac, (height & 0x0f) << 4);
}
+static void adv7842_set_offset(struct v4l2_subdev *sd, bool auto_offset, u16 offset_a, u16 offset_b, u16 offset_c)
+{
+ struct adv7842_state *state = to_state(sd);
+ u8 offset_buf[4];
+
+ if (auto_offset) {
+ offset_a = 0x3ff;
+ offset_b = 0x3ff;
+ offset_c = 0x3ff;
+ }
+
+ v4l2_dbg(2, debug, sd, "%s: %s offset: a = 0x%x, b = 0x%x, c = 0x%x\n",
+ __func__, auto_offset ? "Auto" : "Manual",
+ offset_a, offset_b, offset_c);
+
+ offset_buf[0]= (cp_read(sd, 0x77) & 0xc0) | ((offset_a & 0x3f0) >> 4);
+ offset_buf[1] = ((offset_a & 0x00f) << 4) | ((offset_b & 0x3c0) >> 6);
+ offset_buf[2] = ((offset_b & 0x03f) << 2) | ((offset_c & 0x300) >> 8);
+ offset_buf[3] = offset_c & 0x0ff;
+
+ /* Registers must be written in this order with no i2c access in between */
+ if (adv_smbus_write_i2c_block_data(state->i2c_cp, 0x77, 4, offset_buf))
+ v4l2_err(sd, "%s: i2c error writing to CP reg 0x77, 0x78, 0x79, 0x7a\n", __func__);
+}
+
+static void adv7842_set_gain(struct v4l2_subdev *sd, bool auto_gain, u16 gain_a, u16 gain_b, u16 gain_c)
+{
+ struct adv7842_state *state = to_state(sd);
+ u8 gain_buf[4];
+ u8 gain_man = 1;
+ u8 agc_mode_man = 1;
+
+ if (auto_gain) {
+ gain_man = 0;
+ agc_mode_man = 0;
+ gain_a = 0x100;
+ gain_b = 0x100;
+ gain_c = 0x100;
+ }
+
+ v4l2_dbg(2, debug, sd, "%s: %s gain: a = 0x%x, b = 0x%x, c = 0x%x\n",
+ __func__, auto_gain ? "Auto" : "Manual",
+ gain_a, gain_b, gain_c);
+
+ gain_buf[0] = ((gain_man << 7) | (agc_mode_man << 6) | ((gain_a & 0x3f0) >> 4));
+ gain_buf[1] = (((gain_a & 0x00f) << 4) | ((gain_b & 0x3c0) >> 6));
+ gain_buf[2] = (((gain_b & 0x03f) << 2) | ((gain_c & 0x300) >> 8));
+ gain_buf[3] = ((gain_c & 0x0ff));
+
+ /* Registers must be written in this order with no i2c access in between */
+ if (adv_smbus_write_i2c_block_data(state->i2c_cp, 0x73, 4, gain_buf))
+ v4l2_err(sd, "%s: i2c error writing to CP reg 0x73, 0x74, 0x75, 0x76\n", __func__);
+}
+
static void set_rgb_quantization_range(struct v4l2_subdev *sd)
{
struct adv7842_state *state = to_state(sd);
+ bool rgb_output = io_read(sd, 0x02) & 0x02;
+ bool hdmi_signal = hdmi_read(sd, 0x05) & 0x80;
- v4l2_dbg(2, debug, sd, "%s: rgb_quantization_range = %d\n",
- __func__, state->rgb_quantization_range);
+ v4l2_dbg(2, debug, sd, "%s: RGB quantization range: %d, RGB out: %d, HDMI: %d\n",
+ __func__, state->rgb_quantization_range,
+ rgb_output, hdmi_signal);
+
+ adv7842_set_gain(sd, true, 0x0, 0x0, 0x0);
+ adv7842_set_offset(sd, true, 0x0, 0x0, 0x0);
switch (state->rgb_quantization_range) {
case V4L2_DV_RGB_RANGE_AUTO:
@@ -1050,7 +1118,7 @@
break;
}
- if (hdmi_read(sd, 0x05) & 0x80) {
+ if (hdmi_signal) {
/* Receiving HDMI signal
* Set automode */
io_write_and_or(sd, 0x02, 0x0f, 0xf0);
@@ -1066,24 +1134,45 @@
} else {
/* RGB full range (0-255) */
io_write_and_or(sd, 0x02, 0x0f, 0x10);
+
+ if (is_digital_input(sd) && rgb_output) {
+ adv7842_set_offset(sd, false, 0x40, 0x40, 0x40);
+ } else {
+ adv7842_set_gain(sd, false, 0xe0, 0xe0, 0xe0);
+ adv7842_set_offset(sd, false, 0x70, 0x70, 0x70);
+ }
}
break;
case V4L2_DV_RGB_RANGE_LIMITED:
if (state->mode == ADV7842_MODE_COMP) {
/* YCrCb limited range (16-235) */
io_write_and_or(sd, 0x02, 0x0f, 0x20);
- } else {
- /* RGB limited range (16-235) */
- io_write_and_or(sd, 0x02, 0x0f, 0x00);
+ break;
}
+
+ /* RGB limited range (16-235) */
+ io_write_and_or(sd, 0x02, 0x0f, 0x00);
+
break;
case V4L2_DV_RGB_RANGE_FULL:
if (state->mode == ADV7842_MODE_COMP) {
/* YCrCb full range (0-255) */
io_write_and_or(sd, 0x02, 0x0f, 0x60);
+ break;
+ }
+
+ /* RGB full range (0-255) */
+ io_write_and_or(sd, 0x02, 0x0f, 0x10);
+
+ if (is_analog_input(sd) || hdmi_signal)
+ break;
+
+ /* Adjust gain/offset for DVI-D signals only */
+ if (rgb_output) {
+ adv7842_set_offset(sd, false, 0x40, 0x40, 0x40);
} else {
- /* RGB full range (0-255) */
- io_write_and_or(sd, 0x02, 0x0f, 0x10);
+ adv7842_set_gain(sd, false, 0xe0, 0xe0, 0xe0);
+ adv7842_set_offset(sd, false, 0x70, 0x70, 0x70);
}
break;
}
@@ -1717,8 +1806,8 @@
* (rev. 2.5, June 2010)" p. 17. */
afe_write(sd, 0x12, 0xfb); /* ADC noise shaping filter controls */
afe_write(sd, 0x0c, 0x0d); /* CP core gain controls */
- cp_write(sd, 0x3e, 0x80); /* CP core pre-gain control,
- enable color control */
+ cp_write(sd, 0x3e, 0x00); /* CP core pre-gain control */
+
/* CP coast control */
cp_write(sd, 0xc3, 0x33); /* Component mode */