bpf: migrate ebpf ld_abs/ld_ind tests to test_verifier
Remove all eBPF tests involving LD_ABS/LD_IND from test_bpf.ko. Reason
is that the eBPF tests from test_bpf module do not go via BPF verifier
and therefore any instruction rewrites from verifier cannot take place.
Therefore, move them into test_verifier which runs out of user space,
so that verfier can rewrite LD_ABS/LD_IND internally in upcoming patches.
It will have the same effect since runtime tests are also performed from
there. This also allows to finally unexport bpf_skb_vlan_{push,pop}_proto
and keep it internal to core kernel.
Additionally, also add further cBPF LD_ABS/LD_IND test coverage into
test_bpf.ko suite.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 8e15780..317f231 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -386,116 +386,6 @@
return 0;
}
-#define PUSH_CNT 68
-/* test: {skb->data[0], vlan_push} x 68 + {skb->data[0], vlan_pop} x 68 */
-static int bpf_fill_ld_abs_vlan_push_pop(struct bpf_test *self)
-{
- unsigned int len = BPF_MAXINSNS;
- struct bpf_insn *insn;
- int i = 0, j, k = 0;
-
- insn = kmalloc_array(len, sizeof(*insn), GFP_KERNEL);
- if (!insn)
- return -ENOMEM;
-
- insn[i++] = BPF_MOV64_REG(R6, R1);
-loop:
- for (j = 0; j < PUSH_CNT; j++) {
- insn[i++] = BPF_LD_ABS(BPF_B, 0);
- insn[i] = BPF_JMP_IMM(BPF_JNE, R0, 0x34, len - i - 2);
- i++;
- insn[i++] = BPF_MOV64_REG(R1, R6);
- insn[i++] = BPF_MOV64_IMM(R2, 1);
- insn[i++] = BPF_MOV64_IMM(R3, 2);
- insn[i++] = BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
- bpf_skb_vlan_push_proto.func - __bpf_call_base);
- insn[i] = BPF_JMP_IMM(BPF_JNE, R0, 0, len - i - 2);
- i++;
- }
-
- for (j = 0; j < PUSH_CNT; j++) {
- insn[i++] = BPF_LD_ABS(BPF_B, 0);
- insn[i] = BPF_JMP_IMM(BPF_JNE, R0, 0x34, len - i - 2);
- i++;
- insn[i++] = BPF_MOV64_REG(R1, R6);
- insn[i++] = BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
- bpf_skb_vlan_pop_proto.func - __bpf_call_base);
- insn[i] = BPF_JMP_IMM(BPF_JNE, R0, 0, len - i - 2);
- i++;
- }
- if (++k < 5)
- goto loop;
-
- for (; i < len - 1; i++)
- insn[i] = BPF_ALU32_IMM(BPF_MOV, R0, 0xbef);
-
- insn[len - 1] = BPF_EXIT_INSN();
-
- self->u.ptr.insns = insn;
- self->u.ptr.len = len;
-
- return 0;
-}
-
-static int bpf_fill_ld_abs_vlan_push_pop2(struct bpf_test *self)
-{
- struct bpf_insn *insn;
-
- insn = kmalloc_array(16, sizeof(*insn), GFP_KERNEL);
- if (!insn)
- return -ENOMEM;
-
- /* Due to func address being non-const, we need to
- * assemble this here.
- */
- insn[0] = BPF_MOV64_REG(R6, R1);
- insn[1] = BPF_LD_ABS(BPF_B, 0);
- insn[2] = BPF_LD_ABS(BPF_H, 0);
- insn[3] = BPF_LD_ABS(BPF_W, 0);
- insn[4] = BPF_MOV64_REG(R7, R6);
- insn[5] = BPF_MOV64_IMM(R6, 0);
- insn[6] = BPF_MOV64_REG(R1, R7);
- insn[7] = BPF_MOV64_IMM(R2, 1);
- insn[8] = BPF_MOV64_IMM(R3, 2);
- insn[9] = BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
- bpf_skb_vlan_push_proto.func - __bpf_call_base);
- insn[10] = BPF_MOV64_REG(R6, R7);
- insn[11] = BPF_LD_ABS(BPF_B, 0);
- insn[12] = BPF_LD_ABS(BPF_H, 0);
- insn[13] = BPF_LD_ABS(BPF_W, 0);
- insn[14] = BPF_MOV64_IMM(R0, 42);
- insn[15] = BPF_EXIT_INSN();
-
- self->u.ptr.insns = insn;
- self->u.ptr.len = 16;
-
- return 0;
-}
-
-static int bpf_fill_jump_around_ld_abs(struct bpf_test *self)
-{
- unsigned int len = BPF_MAXINSNS;
- struct bpf_insn *insn;
- int i = 0;
-
- insn = kmalloc_array(len, sizeof(*insn), GFP_KERNEL);
- if (!insn)
- return -ENOMEM;
-
- insn[i++] = BPF_MOV64_REG(R6, R1);
- insn[i++] = BPF_LD_ABS(BPF_B, 0);
- insn[i] = BPF_JMP_IMM(BPF_JEQ, R0, 10, len - i - 2);
- i++;
- while (i < len - 1)
- insn[i++] = BPF_LD_ABS(BPF_B, 1);
- insn[i] = BPF_EXIT_INSN();
-
- self->u.ptr.insns = insn;
- self->u.ptr.len = len;
-
- return 0;
-}
-
static int __bpf_fill_stxdw(struct bpf_test *self, int size)
{
unsigned int len = BPF_MAXINSNS;
@@ -1988,40 +1878,6 @@
{ { 0, -1 } }
},
{
- "INT: DIV + ABS",
- .u.insns_int = {
- BPF_ALU64_REG(BPF_MOV, R6, R1),
- BPF_LD_ABS(BPF_B, 3),
- BPF_ALU64_IMM(BPF_MOV, R2, 2),
- BPF_ALU32_REG(BPF_DIV, R0, R2),
- BPF_ALU64_REG(BPF_MOV, R8, R0),
- BPF_LD_ABS(BPF_B, 4),
- BPF_ALU64_REG(BPF_ADD, R8, R0),
- BPF_LD_IND(BPF_B, R8, -70),
- BPF_EXIT_INSN(),
- },
- INTERNAL,
- { 10, 20, 30, 40, 50 },
- { { 4, 0 }, { 5, 10 } }
- },
- {
- /* This one doesn't go through verifier, but is just raw insn
- * as opposed to cBPF tests from here. Thus div by 0 tests are
- * done in test_verifier in BPF kselftests.
- */
- "INT: DIV by -1",
- .u.insns_int = {
- BPF_ALU64_REG(BPF_MOV, R6, R1),
- BPF_ALU64_IMM(BPF_MOV, R7, -1),
- BPF_LD_ABS(BPF_B, 3),
- BPF_ALU32_REG(BPF_DIV, R0, R7),
- BPF_EXIT_INSN(),
- },
- INTERNAL,
- { 10, 20, 30, 40, 50 },
- { { 3, 0 }, { 4, 0 } }
- },
- {
"check: missing ret",
.u.insns = {
BPF_STMT(BPF_LD | BPF_IMM, 1),
@@ -2383,50 +2239,6 @@
{ },
{ { 0, 1 } }
},
- {
- "nmap reduced",
- .u.insns_int = {
- BPF_MOV64_REG(R6, R1),
- BPF_LD_ABS(BPF_H, 12),
- BPF_JMP_IMM(BPF_JNE, R0, 0x806, 28),
- BPF_LD_ABS(BPF_H, 12),
- BPF_JMP_IMM(BPF_JNE, R0, 0x806, 26),
- BPF_MOV32_IMM(R0, 18),
- BPF_STX_MEM(BPF_W, R10, R0, -64),
- BPF_LDX_MEM(BPF_W, R7, R10, -64),
- BPF_LD_IND(BPF_W, R7, 14),
- BPF_STX_MEM(BPF_W, R10, R0, -60),
- BPF_MOV32_IMM(R0, 280971478),
- BPF_STX_MEM(BPF_W, R10, R0, -56),
- BPF_LDX_MEM(BPF_W, R7, R10, -56),
- BPF_LDX_MEM(BPF_W, R0, R10, -60),
- BPF_ALU32_REG(BPF_SUB, R0, R7),
- BPF_JMP_IMM(BPF_JNE, R0, 0, 15),
- BPF_LD_ABS(BPF_H, 12),
- BPF_JMP_IMM(BPF_JNE, R0, 0x806, 13),
- BPF_MOV32_IMM(R0, 22),
- BPF_STX_MEM(BPF_W, R10, R0, -56),
- BPF_LDX_MEM(BPF_W, R7, R10, -56),
- BPF_LD_IND(BPF_H, R7, 14),
- BPF_STX_MEM(BPF_W, R10, R0, -52),
- BPF_MOV32_IMM(R0, 17366),
- BPF_STX_MEM(BPF_W, R10, R0, -48),
- BPF_LDX_MEM(BPF_W, R7, R10, -48),
- BPF_LDX_MEM(BPF_W, R0, R10, -52),
- BPF_ALU32_REG(BPF_SUB, R0, R7),
- BPF_JMP_IMM(BPF_JNE, R0, 0, 2),
- BPF_MOV32_IMM(R0, 256),
- BPF_EXIT_INSN(),
- BPF_MOV32_IMM(R0, 0),
- BPF_EXIT_INSN(),
- },
- INTERNAL,
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0x06, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0x10, 0xbf, 0x48, 0xd6, 0x43, 0xd6},
- { { 38, 256 } },
- .stack_depth = 64,
- },
/* BPF_ALU | BPF_MOV | BPF_X */
{
"ALU_MOV_X: dst = 2",
@@ -5485,22 +5297,6 @@
{ { 1, 0xbee } },
.fill_helper = bpf_fill_ld_abs_get_processor_id,
},
- {
- "BPF_MAXINSNS: ld_abs+vlan_push/pop",
- { },
- INTERNAL,
- { 0x34 },
- { { ETH_HLEN, 0xbef } },
- .fill_helper = bpf_fill_ld_abs_vlan_push_pop,
- },
- {
- "BPF_MAXINSNS: jump around ld_abs",
- { },
- INTERNAL,
- { 10, 11 },
- { { 2, 10 } },
- .fill_helper = bpf_fill_jump_around_ld_abs,
- },
/*
* LD_IND / LD_ABS on fragmented SKBs
*/
@@ -5683,6 +5479,53 @@
{ {0x40, 0x05 } },
},
{
+ "LD_IND byte positive offset, all ff",
+ .u.insns = {
+ BPF_STMT(BPF_LDX | BPF_IMM, 0x3e),
+ BPF_STMT(BPF_LD | BPF_IND | BPF_B, 0x1),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0xff, [0x3d] = 0xff, [0x3e] = 0xff, [0x3f] = 0xff },
+ { {0x40, 0xff } },
+ },
+ {
+ "LD_IND byte positive offset, out of bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LDX | BPF_IMM, 0x3e),
+ BPF_STMT(BPF_LD | BPF_IND | BPF_B, 0x1),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x3f, 0 }, },
+ },
+ {
+ "LD_IND byte negative offset, out of bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LDX | BPF_IMM, 0x3e),
+ BPF_STMT(BPF_LD | BPF_IND | BPF_B, -0x3f),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x3f, 0 } },
+ },
+ {
+ "LD_IND byte negative offset, multiple calls",
+ .u.insns = {
+ BPF_STMT(BPF_LDX | BPF_IMM, 0x3b),
+ BPF_STMT(BPF_LD | BPF_IND | BPF_B, SKF_LL_OFF + 1),
+ BPF_STMT(BPF_LD | BPF_IND | BPF_B, SKF_LL_OFF + 2),
+ BPF_STMT(BPF_LD | BPF_IND | BPF_B, SKF_LL_OFF + 3),
+ BPF_STMT(BPF_LD | BPF_IND | BPF_B, SKF_LL_OFF + 4),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x40, 0x82 }, },
+ },
+ {
"LD_IND halfword positive offset",
.u.insns = {
BPF_STMT(BPF_LDX | BPF_IMM, 0x20),
@@ -5731,6 +5574,39 @@
{ {0x40, 0x66cc } },
},
{
+ "LD_IND halfword positive offset, all ff",
+ .u.insns = {
+ BPF_STMT(BPF_LDX | BPF_IMM, 0x3d),
+ BPF_STMT(BPF_LD | BPF_IND | BPF_H, 0x1),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0xff, [0x3d] = 0xff, [0x3e] = 0xff, [0x3f] = 0xff },
+ { {0x40, 0xffff } },
+ },
+ {
+ "LD_IND halfword positive offset, out of bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LDX | BPF_IMM, 0x3e),
+ BPF_STMT(BPF_LD | BPF_IND | BPF_H, 0x1),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x3f, 0 }, },
+ },
+ {
+ "LD_IND halfword negative offset, out of bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LDX | BPF_IMM, 0x3e),
+ BPF_STMT(BPF_LD | BPF_IND | BPF_H, -0x3f),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x3f, 0 } },
+ },
+ {
"LD_IND word positive offset",
.u.insns = {
BPF_STMT(BPF_LDX | BPF_IMM, 0x20),
@@ -5821,6 +5697,39 @@
{ {0x40, 0x66cc77dd } },
},
{
+ "LD_IND word positive offset, all ff",
+ .u.insns = {
+ BPF_STMT(BPF_LDX | BPF_IMM, 0x3b),
+ BPF_STMT(BPF_LD | BPF_IND | BPF_W, 0x1),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0xff, [0x3d] = 0xff, [0x3e] = 0xff, [0x3f] = 0xff },
+ { {0x40, 0xffffffff } },
+ },
+ {
+ "LD_IND word positive offset, out of bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LDX | BPF_IMM, 0x3e),
+ BPF_STMT(BPF_LD | BPF_IND | BPF_W, 0x1),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x3f, 0 }, },
+ },
+ {
+ "LD_IND word negative offset, out of bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LDX | BPF_IMM, 0x3e),
+ BPF_STMT(BPF_LD | BPF_IND | BPF_W, -0x3f),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x3f, 0 } },
+ },
+ {
"LD_ABS byte",
.u.insns = {
BPF_STMT(BPF_LD | BPF_ABS | BPF_B, 0x20),
@@ -5838,6 +5747,68 @@
{ {0x40, 0xcc } },
},
{
+ "LD_ABS byte positive offset, all ff",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_B, 0x3f),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0xff, [0x3d] = 0xff, [0x3e] = 0xff, [0x3f] = 0xff },
+ { {0x40, 0xff } },
+ },
+ {
+ "LD_ABS byte positive offset, out of bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_B, 0x3f),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x3f, 0 }, },
+ },
+ {
+ "LD_ABS byte negative offset, out of bounds load",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_B, -1),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC | FLAG_EXPECTED_FAIL,
+ .expected_errcode = -EINVAL,
+ },
+ {
+ "LD_ABS byte negative offset, in bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_B, SKF_LL_OFF + 0x3f),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x40, 0x82 }, },
+ },
+ {
+ "LD_ABS byte negative offset, out of bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_B, SKF_LL_OFF + 0x3f),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x3f, 0 }, },
+ },
+ {
+ "LD_ABS byte negative offset, multiple calls",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_B, SKF_LL_OFF + 0x3c),
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_B, SKF_LL_OFF + 0x3d),
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_B, SKF_LL_OFF + 0x3e),
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_B, SKF_LL_OFF + 0x3f),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x40, 0x82 }, },
+ },
+ {
"LD_ABS halfword",
.u.insns = {
BPF_STMT(BPF_LD | BPF_ABS | BPF_H, 0x22),
@@ -5872,6 +5843,55 @@
{ {0x40, 0x99ff } },
},
{
+ "LD_ABS halfword positive offset, all ff",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_H, 0x3e),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0xff, [0x3d] = 0xff, [0x3e] = 0xff, [0x3f] = 0xff },
+ { {0x40, 0xffff } },
+ },
+ {
+ "LD_ABS halfword positive offset, out of bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_H, 0x3f),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x3f, 0 }, },
+ },
+ {
+ "LD_ABS halfword negative offset, out of bounds load",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_H, -1),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC | FLAG_EXPECTED_FAIL,
+ .expected_errcode = -EINVAL,
+ },
+ {
+ "LD_ABS halfword negative offset, in bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_H, SKF_LL_OFF + 0x3e),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x40, 0x1982 }, },
+ },
+ {
+ "LD_ABS halfword negative offset, out of bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_H, SKF_LL_OFF + 0x3e),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x3f, 0 }, },
+ },
+ {
"LD_ABS word",
.u.insns = {
BPF_STMT(BPF_LD | BPF_ABS | BPF_W, 0x1c),
@@ -5939,6 +5959,140 @@
},
{ {0x40, 0x88ee99ff } },
},
+ {
+ "LD_ABS word positive offset, all ff",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_W, 0x3c),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0xff, [0x3d] = 0xff, [0x3e] = 0xff, [0x3f] = 0xff },
+ { {0x40, 0xffffffff } },
+ },
+ {
+ "LD_ABS word positive offset, out of bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_W, 0x3f),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x3f, 0 }, },
+ },
+ {
+ "LD_ABS word negative offset, out of bounds load",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_W, -1),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC | FLAG_EXPECTED_FAIL,
+ .expected_errcode = -EINVAL,
+ },
+ {
+ "LD_ABS word negative offset, in bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_W, SKF_LL_OFF + 0x3c),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x40, 0x25051982 }, },
+ },
+ {
+ "LD_ABS word negative offset, out of bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_ABS | BPF_W, SKF_LL_OFF + 0x3c),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x3f, 0 }, },
+ },
+ {
+ "LDX_MSH standalone, preserved A",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_IMM, 0xffeebbaa),
+ BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0x3c),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x40, 0xffeebbaa }, },
+ },
+ {
+ "LDX_MSH standalone, preserved A 2",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_IMM, 0x175e9d63),
+ BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0x3c),
+ BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0x3d),
+ BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0x3e),
+ BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0x3f),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x40, 0x175e9d63 }, },
+ },
+ {
+ "LDX_MSH standalone, test result 1",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_IMM, 0xffeebbaa),
+ BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0x3c),
+ BPF_STMT(BPF_MISC | BPF_TXA, 0),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x40, 0x14 }, },
+ },
+ {
+ "LDX_MSH standalone, test result 2",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_IMM, 0xffeebbaa),
+ BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0x3e),
+ BPF_STMT(BPF_MISC | BPF_TXA, 0),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x40, 0x24 }, },
+ },
+ {
+ "LDX_MSH standalone, negative offset",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_IMM, 0xffeebbaa),
+ BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, -1),
+ BPF_STMT(BPF_MISC | BPF_TXA, 0),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x40, 0 }, },
+ },
+ {
+ "LDX_MSH standalone, negative offset 2",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_IMM, 0xffeebbaa),
+ BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, SKF_LL_OFF + 0x3e),
+ BPF_STMT(BPF_MISC | BPF_TXA, 0),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x40, 0x24 }, },
+ },
+ {
+ "LDX_MSH standalone, out of bounds",
+ .u.insns = {
+ BPF_STMT(BPF_LD | BPF_IMM, 0xffeebbaa),
+ BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0x40),
+ BPF_STMT(BPF_MISC | BPF_TXA, 0),
+ BPF_STMT(BPF_RET | BPF_A, 0x0),
+ },
+ CLASSIC,
+ { [0x3c] = 0x25, [0x3d] = 0x05, [0x3e] = 0x19, [0x3f] = 0x82 },
+ { {0x40, 0 }, },
+ },
/*
* verify that the interpreter or JIT correctly sets A and X
* to 0.
@@ -6127,14 +6281,6 @@
{},
{ {0x1, 0x42 } },
},
- {
- "LD_ABS with helper changing skb data",
- { },
- INTERNAL,
- { 0x34 },
- { { ETH_HLEN, 42 } },
- .fill_helper = bpf_fill_ld_abs_vlan_push_pop2,
- },
/* Checking interpreter vs JIT wrt signed extended imms. */
{
"JNE signed compare, test 1",