scsi: hisi_sas: config ATA de-reset as an constrained command for v3 hw
As a unconstrained command, a command can be sent to SATA disk even if
SATA disk status is BUSY, ERR or DRQ.
If an ATA reset assert is successful but ATA reset de-assert fails, then
it will retry the reset de-assert. If reset de- assert retry is
successful, we think it is okay to probe the device but actually it
still has Err status.
Apparently we need to retry the ATA reset assertion and de- assertion
instead for this mentioned scenario.
As such, we config ATA reset assert as a constrained command, if ATA
reset de-assert fails, then ATA reset de-assert retry will also
fail. Then we will retry the proper process of ATA reset assert and
de-assert again.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index ffa3cea..026faee 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -351,10 +351,11 @@
#define DIR_TO_DEVICE 2
#define DIR_RESERVED 3
-#define CMD_IS_UNCONSTRAINT(cmd) \
- ((cmd == ATA_CMD_READ_LOG_EXT) || \
- (cmd == ATA_CMD_READ_LOG_DMA_EXT) || \
- (cmd == ATA_CMD_DEV_RESET))
+#define FIS_CMD_IS_UNCONSTRAINED(fis) \
+ ((fis.command == ATA_CMD_READ_LOG_EXT) || \
+ (fis.command == ATA_CMD_READ_LOG_DMA_EXT) || \
+ ((fis.command == ATA_CMD_DEV_RESET) && \
+ ((fis.control & ATA_SRST) != 0)))
static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
{
@@ -1075,7 +1076,7 @@
<< CMD_HDR_FRAME_TYPE_OFF;
dw1 |= sas_dev->device_id << CMD_HDR_DEV_ID_OFF;
- if (CMD_IS_UNCONSTRAINT(task->ata_task.fis.command))
+ if (FIS_CMD_IS_UNCONSTRAINED(task->ata_task.fis))
dw1 |= 1 << CMD_HDR_UNCON_CMD_OFF;
hdr->dw1 = cpu_to_le32(dw1);