UBI: set correct gluebi device size
In case of static volumes, make emulated MTD device size to
be equivalent to data size, rather then volume size.
Reported-by: John Smith <john@arrows.demon.co.uk>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 6612eb7..959044a 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -397,6 +397,7 @@
vol->corrupted = 1;
}
vol->checked = 1;
+ ubi_gluebi_updated(vol);
revoke_exclusive(desc, UBI_READWRITE);
}
diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index fc9478d..41ff74c 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -282,7 +282,6 @@
mtd->flags = MTD_WRITEABLE;
mtd->writesize = ubi->min_io_size;
mtd->owner = THIS_MODULE;
- mtd->size = vol->usable_leb_size * vol->reserved_pebs;
mtd->erasesize = vol->usable_leb_size;
mtd->read = gluebi_read;
mtd->write = gluebi_write;
@@ -290,6 +289,15 @@
mtd->get_device = gluebi_get_device;
mtd->put_device = gluebi_put_device;
+ /*
+ * In case of dynamic volume, MTD device size is just volume size. In
+ * case of a static volume the size is equivalent to the amount of data
+ * bytes, which is zero at this moment and will be changed after volume
+ * update.
+ */
+ if (vol->vol_type == UBI_DYNAMIC_VOLUME)
+ mtd->size = vol->usable_leb_size * vol->reserved_pebs;
+
if (add_mtd_device(mtd)) {
ubi_err("cannot not add MTD device\n");
kfree(mtd->name);
@@ -321,3 +329,20 @@
kfree(mtd->name);
return 0;
}
+
+/**
+ * ubi_gluebi_updated - UBI volume was updated notifier.
+ * @vol: volume description object
+ *
+ * This function is called every time an UBI volume is updated. This function
+ * does nothing if volume @vol is dynamic, and changes MTD device size if the
+ * volume is static. This is needed because static volumes cannot be read past
+ * data they contain.
+ */
+void ubi_gluebi_updated(struct ubi_volume *vol)
+{
+ struct mtd_info *mtd = &vol->gluebi_mtd;
+
+ if (vol->vol_type == UBI_STATIC_VOLUME)
+ mtd->size = vol->used_bytes;
+}
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 30d536e..197cd650 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -55,7 +55,7 @@
static struct ubi_ec_hdr *ech;
static struct ubi_vid_hdr *vidh;
-/*
+/**
* add_to_list - add physical eraseblock to a list.
* @si: scanning information
* @pnum: physical eraseblock number to add
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index feb647f..c26edea 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -374,9 +374,11 @@
#ifdef CONFIG_MTD_UBI_GLUEBI
int ubi_create_gluebi(struct ubi_device *ubi, struct ubi_volume *vol);
int ubi_destroy_gluebi(struct ubi_volume *vol);
+void ubi_gluebi_updated(struct ubi_volume *vol);
#else
#define ubi_create_gluebi(ubi, vol) 0
#define ubi_destroy_gluebi(vol) 0
+#define ubi_gluebi_updated(vol)
#endif
/* eba.c */