MIPS: Octeon: Add support for accessing the boot vector.
Used by the Octeon watchdog driver to get the address of the
firmware boot vector.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-watchdog@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17206/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/cavium-octeon/executive/Makefile b/arch/mips/cavium-octeon/executive/Makefile
index b6d6e84..50b4278 100644
--- a/arch/mips/cavium-octeon/executive/Makefile
+++ b/arch/mips/cavium-octeon/executive/Makefile
@@ -16,4 +16,4 @@
cvmx-helper-loop.o cvmx-helper-spi.o cvmx-helper-util.o \
cvmx-interrupt-decodes.o cvmx-interrupt-rsl.o
-obj-y += cvmx-helper-errata.o cvmx-helper-jtag.o
+obj-y += cvmx-helper-errata.o cvmx-helper-jtag.o cvmx-boot-vector.o
diff --git a/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c b/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c
new file mode 100644
index 0000000..b7019d2
--- /dev/null
+++ b/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c
@@ -0,0 +1,167 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004-2017 Cavium, Inc.
+ */
+
+
+/*
+ We install this program at the bootvector:
+------------------------------------
+ .set noreorder
+ .set nomacro
+ .set noat
+reset_vector:
+ dmtc0 $k0, $31, 0 # Save $k0 to DESAVE
+ dmtc0 $k1, $31, 3 # Save $k1 to KScratch2
+
+ mfc0 $k0, $12, 0 # Status
+ mfc0 $k1, $15, 1 # Ebase
+
+ ori $k0, 0x84 # Enable 64-bit addressing, set
+ # ERL (should already be set)
+ andi $k1, 0x3ff # mask out core ID
+
+ mtc0 $k0, $12, 0 # Status
+ sll $k1, 5
+
+ lui $k0, 0xbfc0
+ cache 17, 0($0) # Core-14345, clear L1 Dcache virtual
+ # tags if the core hit an NMI
+
+ ld $k0, 0x78($k0) # k0 <- (bfc00078) pointer to the reset vector
+ synci 0($0) # Invalidate ICache to get coherent
+ # view of target code.
+
+ daddu $k0, $k0, $k1
+ nop
+
+ ld $k0, 0($k0) # k0 <- core specific target address
+ dmfc0 $k1, $31, 3 # Restore $k1 from KScratch2
+
+ beqz $k0, wait_loop # Spin in wait loop
+ nop
+
+ jr $k0
+ nop
+
+ nop # NOPs needed here to fill delay slots
+ nop # on endian reversal of previous instructions
+
+wait_loop:
+ wait
+ nop
+
+ b wait_loop
+ nop
+
+ nop
+ nop
+------------------------------------
+
+0000000000000000 <reset_vector>:
+ 0: 40baf800 dmtc0 k0,c0_desave
+ 4: 40bbf803 dmtc0 k1,c0_kscratch2
+
+ 8: 401a6000 mfc0 k0,c0_status
+ c: 401b7801 mfc0 k1,c0_ebase
+
+ 10: 375a0084 ori k0,k0,0x84
+ 14: 337b03ff andi k1,k1,0x3ff
+
+ 18: 409a6000 mtc0 k0,c0_status
+ 1c: 001bd940 sll k1,k1,0x5
+
+ 20: 3c1abfc0 lui k0,0xbfc0
+ 24: bc110000 cache 0x11,0(zero)
+
+ 28: df5a0078 ld k0,120(k0)
+ 2c: 041f0000 synci 0(zero)
+
+ 30: 035bd02d daddu k0,k0,k1
+ 34: 00000000 nop
+
+ 38: df5a0000 ld k0,0(k0)
+ 3c: 403bf803 dmfc0 k1,c0_kscratch2
+
+ 40: 13400005 beqz k0,58 <wait_loop>
+ 44: 00000000 nop
+
+ 48: 03400008 jr k0
+ 4c: 00000000 nop
+
+ 50: 00000000 nop
+ 54: 00000000 nop
+
+0000000000000058 <wait_loop>:
+ 58: 42000020 wait
+ 5c: 00000000 nop
+
+ 60: 1000fffd b 58 <wait_loop>
+ 64: 00000000 nop
+
+ 68: 00000000 nop
+ 6c: 00000000 nop
+
+ */
+
+#include <asm/octeon/cvmx-boot-vector.h>
+
+static unsigned long long _cvmx_bootvector_data[16] = {
+ 0x40baf80040bbf803ull, /* patch low order 8-bits if no KScratch*/
+ 0x401a6000401b7801ull,
+ 0x375a0084337b03ffull,
+ 0x409a6000001bd940ull,
+ 0x3c1abfc0bc110000ull,
+ 0xdf5a0078041f0000ull,
+ 0x035bd02d00000000ull,
+ 0xdf5a0000403bf803ull, /* patch low order 8-bits if no KScratch*/
+ 0x1340000500000000ull,
+ 0x0340000800000000ull,
+ 0x0000000000000000ull,
+ 0x4200002000000000ull,
+ 0x1000fffd00000000ull,
+ 0x0000000000000000ull,
+ OCTEON_BOOT_MOVEABLE_MAGIC1,
+ 0 /* To be filled in with address of vector block*/
+};
+
+/* 2^10 CPUs */
+#define VECTOR_TABLE_SIZE (1024 * sizeof(struct cvmx_boot_vector_element))
+
+static void cvmx_boot_vector_init(void *mem)
+{
+ uint64_t kseg0_mem;
+ int i;
+
+ memset(mem, 0, VECTOR_TABLE_SIZE);
+ kseg0_mem = cvmx_ptr_to_phys(mem) | 0x8000000000000000ull;
+
+ for (i = 0; i < 15; i++) {
+ uint64_t v = _cvmx_bootvector_data[i];
+
+ if (OCTEON_IS_OCTEON1PLUS() && (i == 0 || i == 7))
+ v &= 0xffffffff00000000ull; /* KScratch not availble. */
+ cvmx_write_csr(CVMX_MIO_BOOT_LOC_ADR, i * 8);
+ cvmx_write_csr(CVMX_MIO_BOOT_LOC_DAT, v);
+ }
+ cvmx_write_csr(CVMX_MIO_BOOT_LOC_ADR, 15 * 8);
+ cvmx_write_csr(CVMX_MIO_BOOT_LOC_DAT, kseg0_mem);
+ cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0x81fc0000);
+}
+
+/**
+ * Get a pointer to the per-core table of reset vector pointers
+ *
+ */
+struct cvmx_boot_vector_element *cvmx_boot_vector_get(void)
+{
+ struct cvmx_boot_vector_element *ret;
+
+ ret = cvmx_bootmem_alloc_named_range_once(VECTOR_TABLE_SIZE, 0,
+ (1ull << 32) - 1, 8, "__boot_vector1__", cvmx_boot_vector_init);
+ return ret;
+}
+EXPORT_SYMBOL(cvmx_boot_vector_get);
diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
index 8d54d77..94d97eb 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
@@ -44,6 +44,55 @@
/* See header file for descriptions of functions */
+/**
+ * This macro returns the size of a member of a structure.
+ * Logically it is the same as "sizeof(s::field)" in C++, but
+ * C lacks the "::" operator.
+ */
+#define SIZEOF_FIELD(s, field) sizeof(((s *)NULL)->field)
+
+/**
+ * This macro returns a member of the
+ * cvmx_bootmem_named_block_desc_t structure. These members can't
+ * be directly addressed as they might be in memory not directly
+ * reachable. In the case where bootmem is compiled with
+ * LINUX_HOST, the structure itself might be located on a remote
+ * Octeon. The argument "field" is the member name of the
+ * cvmx_bootmem_named_block_desc_t to read. Regardless of the type
+ * of the field, the return type is always a uint64_t. The "addr"
+ * parameter is the physical address of the structure.
+ */
+#define CVMX_BOOTMEM_NAMED_GET_FIELD(addr, field) \
+ __cvmx_bootmem_desc_get(addr, \
+ offsetof(struct cvmx_bootmem_named_block_desc, field), \
+ SIZEOF_FIELD(struct cvmx_bootmem_named_block_desc, field))
+
+/**
+ * This function is the implementation of the get macros defined
+ * for individual structure members. The argument are generated
+ * by the macros inorder to read only the needed memory.
+ *
+ * @param base 64bit physical address of the complete structure
+ * @param offset Offset from the beginning of the structure to the member being
+ * accessed.
+ * @param size Size of the structure member.
+ *
+ * @return Value of the structure member promoted into a uint64_t.
+ */
+static inline uint64_t __cvmx_bootmem_desc_get(uint64_t base, int offset,
+ int size)
+{
+ base = (1ull << 63) | (base + offset);
+ switch (size) {
+ case 4:
+ return cvmx_read64_uint32(base);
+ case 8:
+ return cvmx_read64_uint64(base);
+ default:
+ return 0;
+ }
+}
+
/*
* Wrapper functions are provided for reading/writing the size and
* next block values as these may not be directly addressible (in 32
@@ -98,6 +147,42 @@
return cvmx_bootmem_alloc_range(size, alignment, 0, 0);
}
+void *cvmx_bootmem_alloc_named_range_once(uint64_t size, uint64_t min_addr,
+ uint64_t max_addr, uint64_t align,
+ char *name,
+ void (*init) (void *))
+{
+ int64_t addr;
+ void *ptr;
+ uint64_t named_block_desc_addr;
+
+ named_block_desc_addr = (uint64_t)
+ cvmx_bootmem_phy_named_block_find(name,
+ (uint32_t)CVMX_BOOTMEM_FLAG_NO_LOCKING);
+
+ if (named_block_desc_addr) {
+ addr = CVMX_BOOTMEM_NAMED_GET_FIELD(named_block_desc_addr,
+ base_addr);
+ return cvmx_phys_to_ptr(addr);
+ }
+
+ addr = cvmx_bootmem_phy_named_block_alloc(size, min_addr, max_addr,
+ align, name,
+ (uint32_t)CVMX_BOOTMEM_FLAG_NO_LOCKING);
+
+ if (addr < 0)
+ return NULL;
+ ptr = cvmx_phys_to_ptr(addr);
+
+ if (init)
+ init(ptr);
+ else
+ memset(ptr, 0, size);
+
+ return ptr;
+}
+EXPORT_SYMBOL(cvmx_bootmem_alloc_named_range_once);
+
void *cvmx_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr,
uint64_t max_addr, uint64_t align,
char *name)
diff --git a/arch/mips/include/asm/octeon/cvmx-boot-vector.h b/arch/mips/include/asm/octeon/cvmx-boot-vector.h
new file mode 100644
index 0000000..8db0824
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-boot-vector.h
@@ -0,0 +1,53 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003-2017 Cavium, Inc.
+ */
+
+#ifndef __CVMX_BOOT_VECTOR_H__
+#define __CVMX_BOOT_VECTOR_H__
+
+#include <asm/octeon/octeon.h>
+
+/*
+ * The boot vector table is made up of an array of 1024 elements of
+ * struct cvmx_boot_vector_element. There is one entry for each
+ * possible MIPS CPUNum, indexed by the CPUNum.
+ *
+ * Once cvmx_boot_vector_get() returns a non-NULL value (indicating
+ * success), NMI to a core will cause execution to transfer to the
+ * target_ptr location for that core's entry in the vector table.
+ *
+ * The struct cvmx_boot_vector_element fields app0, app1, and app2 can
+ * be used by the application that has set the target_ptr in any
+ * application specific manner, they are not touched by the vectoring
+ * code.
+ *
+ * The boot vector code clobbers the CP0_DESAVE register, and on
+ * OCTEON II and later CPUs also clobbers CP0_KScratch2. All GP
+ * registers are preserved, except on pre-OCTEON II CPUs, where k1 is
+ * clobbered.
+ *
+ */
+
+
+/*
+ * Applications install the boot bus code in cvmx-boot-vector.c, which
+ * uses this magic:
+ */
+#define OCTEON_BOOT_MOVEABLE_MAGIC1 0xdb00110ad358eacdull
+
+struct cvmx_boot_vector_element {
+ /* kseg0 or xkphys address of target code. */
+ uint64_t target_ptr;
+ /* Three application specific arguments. */
+ uint64_t app0;
+ uint64_t app1;
+ uint64_t app2;
+};
+
+struct cvmx_boot_vector_element *cvmx_boot_vector_get(void);
+
+#endif /* __CVMX_BOOT_VECTOR_H__ */
diff --git a/arch/mips/include/asm/octeon/cvmx-bootmem.h b/arch/mips/include/asm/octeon/cvmx-bootmem.h
index 3745625..72d2e40 100644
--- a/arch/mips/include/asm/octeon/cvmx-bootmem.h
+++ b/arch/mips/include/asm/octeon/cvmx-bootmem.h
@@ -255,6 +255,34 @@
uint64_t max_addr, uint64_t align,
char *name);
+/**
+ * Allocate if needed a block of memory from a specific range of the
+ * free list that was passed to the application by the bootloader, and
+ * assign it a name in the global named block table. (part of the
+ * cvmx_bootmem_descriptor_t structure) Named blocks can later be
+ * freed. If the requested name block is already allocated, return
+ * the pointer to block of memory. If request cannot be satisfied
+ * within the address range specified, NULL is returned
+ *
+ * @param size Size in bytes of block to allocate
+ * @param min_addr minimum address of range
+ * @param max_addr maximum address of range
+ * @param align Alignment of memory to be allocated. (must be a power of 2)
+ * @param name name of block - must be less than CVMX_BOOTMEM_NAME_LEN bytes
+ * @param init Initialization function
+ *
+ * The initialization function is optional, if omitted the named block
+ * is initialized to all zeros when it is created, i.e. once.
+ *
+ * @return pointer to block of memory, NULL on error
+ */
+void *cvmx_bootmem_alloc_named_range_once(uint64_t size,
+ uint64_t min_addr,
+ uint64_t max_addr,
+ uint64_t align,
+ char *name,
+ void (*init) (void *));
+
extern int cvmx_bootmem_free_named(char *name);
/**