[SCSI] lpfc 8.3.39: Fix driver issues with large s/g lists for BlockGuard
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 1f2f1f4..924ceaa 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -46,13 +46,15 @@
#define LPFC_DEFAULT_MENLO_SG_SEG_CNT 128 /* sg element count per scsi
cmnd for menlo needs nearly twice as for firmware
downloads using bsg */
-#define LPFC_DEFAULT_PROT_SG_SEG_CNT 4096 /* sg protection elements count */
+
+#define LPFC_MIN_SG_SLI4_BUF_SZ 0x800 /* based on LPFC_DEFAULT_SG_SEG_CNT */
+#define LPFC_MAX_SG_SLI4_SEG_CNT_DIF 128 /* sg element count per scsi cmnd */
+#define LPFC_MAX_SG_SEG_CNT_DIF 512 /* sg element count per scsi cmnd */
#define LPFC_MAX_SG_SEG_CNT 4096 /* sg element count per scsi cmnd */
#define LPFC_MAX_SGL_SEG_CNT 512 /* SGL element count per scsi cmnd */
#define LPFC_MAX_BPL_SEG_CNT 4096 /* BPL element count per scsi cmnd */
#define LPFC_MAX_SGE_SIZE 0x80000000 /* Maximum data allowed in a SGE */
-#define LPFC_MAX_PROT_SG_SEG_CNT 4096 /* prot sg element count per scsi cmd*/
#define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */
#define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */
#define LPFC_VNAME_LEN 100 /* vport symbolic name length */
@@ -710,6 +712,7 @@
uint32_t cfg_fcp_wq_count;
uint32_t cfg_fcp_eq_count;
uint32_t cfg_fcp_io_channel;
+ uint32_t cfg_total_seg_cnt;
uint32_t cfg_sg_seg_cnt;
uint32_t cfg_prot_sg_seg_cnt;
uint32_t cfg_sg_dma_buf_size;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index ad5b0f9..3b10aa5 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4073,16 +4073,23 @@
/*
* lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count
- * This value can be set to values between 64 and 256. The default value is
+ * This value can be set to values between 64 and 4096. The default value is
* 64, but may be increased to allow for larger Max I/O sizes. The scsi layer
* will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE).
+ * Because of the additional overhead involved in setting up T10-DIF,
+ * this parameter will be limited to 128 if BlockGuard is enabled under SLI4
+ * and will be limited to 512 if BlockGuard is enabled under SLI3.
*/
LPFC_ATTR_R(sg_seg_cnt, LPFC_DEFAULT_SG_SEG_CNT, LPFC_DEFAULT_SG_SEG_CNT,
LPFC_MAX_SG_SEG_CNT, "Max Scatter Gather Segment Count");
-LPFC_ATTR_R(prot_sg_seg_cnt, LPFC_DEFAULT_PROT_SG_SEG_CNT,
- LPFC_DEFAULT_PROT_SG_SEG_CNT, LPFC_MAX_PROT_SG_SEG_CNT,
- "Max Protection Scatter Gather Segment Count");
+/*
+ * This parameter will be depricated, the driver cannot limit the
+ * protection data s/g list.
+ */
+LPFC_ATTR_R(prot_sg_seg_cnt, LPFC_DEFAULT_SG_SEG_CNT,
+ LPFC_DEFAULT_SG_SEG_CNT, LPFC_MAX_SG_SEG_CNT,
+ "Max Protection Scatter Gather Segment Count");
struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_bg_info,
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index b2227fc..1874b32 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4730,24 +4730,53 @@
return -ENOMEM;
/*
- * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+ * Since lpfc_sg_seg_cnt is module parameter, the sg_dma_buf_size
* used to create the sg_dma_buf_pool must be dynamically calculated.
- * 2 segments are added since the IOCB needs a command and response bde.
*/
- phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
- sizeof(struct fcp_rsp) +
- ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
- if (phba->cfg_enable_bg) {
- phba->cfg_sg_seg_cnt = LPFC_MAX_BPL_SEG_CNT;
- phba->cfg_sg_dma_buf_size +=
- phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
- }
-
- /* Also reinitialize the host templates with new values. */
+ /* Initialize the host templates the configured values. */
lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+ /* There are going to be 2 reserved BDEs: 1 FCP cmnd + 1 FCP rsp */
+ if (phba->cfg_enable_bg) {
+ /*
+ * The scsi_buf for a T10-DIF I/O will hold the FCP cmnd,
+ * the FCP rsp, and a BDE for each. Sice we have no control
+ * over how many protection data segments the SCSI Layer
+ * will hand us (ie: there could be one for every block
+ * in the IO), we just allocate enough BDEs to accomidate
+ * our max amount and we need to limit lpfc_sg_seg_cnt to
+ * minimize the risk of running out.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) +
+ (LPFC_MAX_SG_SEG_CNT * sizeof(struct ulp_bde64));
+
+ if (phba->cfg_sg_seg_cnt > LPFC_MAX_SG_SEG_CNT_DIF)
+ phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT_DIF;
+
+ /* Total BDEs in BPL for scsi_sg_list and scsi_sg_prot_list */
+ phba->cfg_total_seg_cnt = LPFC_MAX_SG_SEG_CNT;
+ } else {
+ /*
+ * The scsi_buf for a regular I/O will hold the FCP cmnd,
+ * the FCP rsp, a BDE for each, and a BDE for up to
+ * cfg_sg_seg_cnt data segments.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) +
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
+
+ /* Total BDEs in BPL for scsi_sg_list */
+ phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + 2;
+ }
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
+ "9088 sg_tablesize:%d dmabuf_size:%d total_bde:%d\n",
+ phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size,
+ phba->cfg_total_seg_cnt);
+
phba->max_vpi = LPFC_MAX_VPI;
/* This will be set to correct value after config_port mbox */
phba->max_vports = 0;
@@ -4814,11 +4843,10 @@
{
struct lpfc_sli *psli;
LPFC_MBOXQ_t *mboxq;
- int rc, i, hbq_count, buf_size, dma_buf_size, max_buf_size;
+ int rc, i, hbq_count, max_buf_size;
uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0};
struct lpfc_mqe *mqe;
int longs;
- int sges_per_segment;
/* Before proceed, wait for POST done and device ready */
rc = lpfc_sli4_post_status_check(phba);
@@ -4886,11 +4914,6 @@
phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
- /* With BlockGuard we can have multiple SGEs per Data Segemnt */
- sges_per_segment = 1;
- if (phba->cfg_enable_bg)
- sges_per_segment = 2;
-
/*
* For SLI4, instead of using ring 0 (LPFC_FCP_RING) for FCP commands
* we will associate a new ring, for each FCP fastpath EQ/CQ/WQ tuple.
@@ -4910,29 +4933,62 @@
max_buf_size = (2 * SLI4_PAGE_SIZE);
if (phba->cfg_sg_seg_cnt > LPFC_MAX_SGL_SEG_CNT - 2)
phba->cfg_sg_seg_cnt = LPFC_MAX_SGL_SEG_CNT - 2;
- max_buf_size += (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
/*
- * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+ * Since lpfc_sg_seg_cnt is module parameter, the sg_dma_buf_size
* used to create the sg_dma_buf_pool must be dynamically calculated.
- * 2 segments are added since the IOCB needs a command and response bde.
- * To insure that the scsi sgl does not cross a 4k page boundary only
- * sgl sizes of must be a power of 2.
*/
- buf_size = (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp) +
- (((phba->cfg_sg_seg_cnt * sges_per_segment) + 2) *
- sizeof(struct sli4_sge)));
- for (dma_buf_size = LPFC_SLI4_MIN_BUF_SIZE;
- dma_buf_size < max_buf_size && buf_size > dma_buf_size;
- dma_buf_size = dma_buf_size << 1)
- ;
- if (dma_buf_size == max_buf_size)
- phba->cfg_sg_seg_cnt = (dma_buf_size -
- sizeof(struct fcp_cmnd) - sizeof(struct fcp_rsp) -
- (2 * sizeof(struct sli4_sge))) /
- sizeof(struct sli4_sge);
- phba->cfg_sg_dma_buf_size = dma_buf_size;
+ if (phba->cfg_enable_bg) {
+ /*
+ * The scsi_buf for a T10-DIF I/O will hold the FCP cmnd,
+ * the FCP rsp, and a SGE for each. Sice we have no control
+ * over how many protection data segments the SCSI Layer
+ * will hand us (ie: there could be one for every block
+ * in the IO), we just allocate enough SGEs to accomidate
+ * our max amount and we need to limit lpfc_sg_seg_cnt to
+ * minimize the risk of running out.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) + max_buf_size;
+
+ /* Total SGEs for scsi_sg_list and scsi_sg_prot_list */
+ phba->cfg_total_seg_cnt = LPFC_MAX_SGL_SEG_CNT;
+
+ if (phba->cfg_sg_seg_cnt > LPFC_MAX_SG_SLI4_SEG_CNT_DIF)
+ phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SLI4_SEG_CNT_DIF;
+ } else {
+ /*
+ * The scsi_buf for a regular I/O will hold the FCP cmnd,
+ * the FCP rsp, a SGE for each, and a SGE for up to
+ * cfg_sg_seg_cnt data segments.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) +
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge));
+
+ /* Total SGEs for scsi_sg_list */
+ phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + 2;
+ /*
+ * NOTE: if (phba->cfg_sg_seg_cnt + 2) <= 256 we only need
+ * to post 1 page for the SGL.
+ */
+ }
+
+ /* Initialize the host templates with the updated values. */
+ lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+ lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+
+ if (phba->cfg_sg_dma_buf_size <= LPFC_MIN_SG_SLI4_BUF_SZ)
+ phba->cfg_sg_dma_buf_size = LPFC_MIN_SG_SLI4_BUF_SZ;
+ else
+ phba->cfg_sg_dma_buf_size =
+ SLI4_PAGE_ALIGN(phba->cfg_sg_dma_buf_size);
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
+ "9087 sg_tablesize:%d dmabuf_size:%d total_sge:%d\n",
+ phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size,
+ phba->cfg_total_seg_cnt);
/* Initialize buffer queue management fields */
hbq_count = lpfc_sli_hbq_count();
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index cd86069..812d0cd 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -64,18 +64,26 @@
struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
int i;
- if (phba->sli_rev == LPFC_SLI_REV4)
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ /* Calculate alignment */
+ if (phba->cfg_sg_dma_buf_size < SLI4_PAGE_SIZE)
+ i = phba->cfg_sg_dma_buf_size;
+ else
+ i = SLI4_PAGE_SIZE;
+
phba->lpfc_scsi_dma_buf_pool =
pci_pool_create("lpfc_scsi_dma_buf_pool",
phba->pcidev,
phba->cfg_sg_dma_buf_size,
- phba->cfg_sg_dma_buf_size,
+ i,
0);
- else
+ } else {
phba->lpfc_scsi_dma_buf_pool =
pci_pool_create("lpfc_scsi_dma_buf_pool",
phba->pcidev, phba->cfg_sg_dma_buf_size,
align, 0);
+ }
+
if (!phba->lpfc_scsi_dma_buf_pool)
goto fail;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index d096402..c79b4dc 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -536,7 +536,16 @@
dma_addr_t pdma_phys_fcp_rsp;
dma_addr_t pdma_phys_bpl;
uint16_t iotag;
- int bcnt;
+ int bcnt, bpl_size;
+
+ bpl_size = phba->cfg_sg_dma_buf_size -
+ (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
+ "9067 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n",
+ num_to_alloc, phba->cfg_sg_dma_buf_size,
+ (int)sizeof(struct fcp_cmnd),
+ (int)sizeof(struct fcp_rsp), bpl_size);
for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
@@ -761,7 +770,7 @@
struct list_head *post_sblist, int sb_count)
{
struct lpfc_scsi_buf *psb, *psb_next;
- int status;
+ int status, sgl_size;
int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
dma_addr_t pdma_phys_bpl1;
int last_xritag = NO_XRI;
@@ -773,6 +782,9 @@
if (sb_count <= 0)
return -EINVAL;
+ sgl_size = phba->cfg_sg_dma_buf_size -
+ (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+
list_for_each_entry_safe(psb, psb_next, post_sblist, list) {
list_del_init(&psb->list);
block_cnt++;
@@ -805,7 +817,7 @@
post_cnt = block_cnt;
} else if (block_cnt == 1) {
/* last single sgl with non-contiguous xri */
- if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+ if (sgl_size > SGL_PAGE_SIZE)
pdma_phys_bpl1 = psb->dma_phys_bpl +
SGL_PAGE_SIZE;
else
@@ -925,13 +937,22 @@
IOCB_t *iocb;
dma_addr_t pdma_phys_fcp_cmd;
dma_addr_t pdma_phys_fcp_rsp;
- dma_addr_t pdma_phys_bpl, pdma_phys_bpl1;
+ dma_addr_t pdma_phys_bpl;
uint16_t iotag, lxri = 0;
- int bcnt, num_posted;
+ int bcnt, num_posted, sgl_size;
LIST_HEAD(prep_sblist);
LIST_HEAD(post_sblist);
LIST_HEAD(scsi_sblist);
+ sgl_size = phba->cfg_sg_dma_buf_size -
+ (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
+ "9068 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n",
+ num_to_alloc, phba->cfg_sg_dma_buf_size, sgl_size,
+ (int)sizeof(struct fcp_cmnd),
+ (int)sizeof(struct fcp_rsp));
+
for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
if (!psb)
@@ -950,6 +971,15 @@
}
memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+ /* Page alignment is CRITICAL, double check to be sure */
+ if (((unsigned long)(psb->data) &
+ (unsigned long)(SLI4_PAGE_SIZE - 1)) != 0) {
+ pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+ psb->data, psb->dma_handle);
+ kfree(psb);
+ break;
+ }
+
/* Allocate iotag for psb->cur_iocbq. */
iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
if (iotag == 0) {
@@ -970,17 +1000,14 @@
psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
psb->fcp_bpl = psb->data;
- psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size)
- - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+ psb->fcp_cmnd = (psb->data + sgl_size);
psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
sizeof(struct fcp_cmnd));
/* Initialize local short-hand pointers. */
sgl = (struct sli4_sge *)psb->fcp_bpl;
pdma_phys_bpl = psb->dma_handle;
- pdma_phys_fcp_cmd =
- (psb->dma_handle + phba->cfg_sg_dma_buf_size)
- - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+ pdma_phys_fcp_cmd = (psb->dma_handle + sgl_size);
pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
/*
@@ -1022,10 +1049,6 @@
iocb->ulpLe = 1;
iocb->ulpClass = CLASS3;
psb->cur_iocbq.context1 = psb;
- if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
- pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE;
- else
- pdma_phys_bpl1 = 0;
psb->dma_phys_bpl = pdma_phys_bpl;
/* add the scsi buffer to a post list */
@@ -1270,6 +1293,7 @@
"dma_map_sg. Config %d, seg_cnt %d\n",
__func__, phba->cfg_sg_seg_cnt,
lpfc_cmd->seg_cnt);
+ lpfc_cmd->seg_cnt = 0;
scsi_dma_unmap(scsi_cmnd);
return 1;
}
@@ -2147,6 +2171,10 @@
split_offset = 0;
do {
+ /* Check to see if we ran out of space */
+ if (num_bde >= (phba->cfg_total_seg_cnt - 2))
+ return num_bde + 3;
+
/* setup PDE5 with what we have */
pde5 = (struct lpfc_pde5 *) bpl;
memset(pde5, 0, sizeof(struct lpfc_pde5));
@@ -2215,6 +2243,10 @@
pgdone = 0;
subtotal = 0; /* total bytes processed for current prot grp */
while (!pgdone) {
+ /* Check to see if we ran out of space */
+ if (num_bde >= phba->cfg_total_seg_cnt)
+ return num_bde + 1;
+
if (!sgde) {
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9065 BLKGRD:%s Invalid data segment\n",
@@ -2499,6 +2531,10 @@
split_offset = 0;
do {
+ /* Check to see if we ran out of space */
+ if (num_sge >= (phba->cfg_total_seg_cnt - 2))
+ return num_sge + 3;
+
/* setup DISEED with what we have */
diseed = (struct sli4_sge_diseed *) sgl;
memset(diseed, 0, sizeof(struct sli4_sge_diseed));
@@ -2558,6 +2594,10 @@
pgdone = 0;
subtotal = 0; /* total bytes processed for current prot grp */
while (!pgdone) {
+ /* Check to see if we ran out of space */
+ if (num_sge >= phba->cfg_total_seg_cnt)
+ return num_sge + 1;
+
if (!sgde) {
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9086 BLKGRD:%s Invalid data segment\n",
@@ -2713,28 +2753,28 @@
return 1;
lpfc_cmd->seg_cnt = datasegcnt;
- if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
- lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9067 BLKGRD: %s: Too many sg segments"
- " from dma_map_sg. Config %d, seg_cnt"
- " %d\n",
- __func__, phba->cfg_sg_seg_cnt,
- lpfc_cmd->seg_cnt);
- scsi_dma_unmap(scsi_cmnd);
- return 1;
- }
+
+ /* First check if data segment count from SCSI Layer is good */
+ if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt)
+ goto err;
prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);
switch (prot_group_type) {
case LPFC_PG_TYPE_NO_DIF:
+
+ /* Here we need to add a PDE5 and PDE6 to the count */
+ if ((lpfc_cmd->seg_cnt + 2) > phba->cfg_total_seg_cnt)
+ goto err;
+
num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl,
datasegcnt);
/* we should have 2 or more entries in buffer list */
if (num_bde < 2)
goto err;
break;
- case LPFC_PG_TYPE_DIF_BUF:{
+
+ case LPFC_PG_TYPE_DIF_BUF:
/*
* This type indicates that protection buffers are
* passed to the driver, so that needs to be prepared
@@ -2749,31 +2789,28 @@
}
lpfc_cmd->prot_seg_cnt = protsegcnt;
- if (lpfc_cmd->prot_seg_cnt
- > phba->cfg_prot_sg_seg_cnt) {
- lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9068 BLKGRD: %s: Too many prot sg "
- "segments from dma_map_sg. Config %d,"
- "prot_seg_cnt %d\n", __func__,
- phba->cfg_prot_sg_seg_cnt,
- lpfc_cmd->prot_seg_cnt);
- dma_unmap_sg(&phba->pcidev->dev,
- scsi_prot_sglist(scsi_cmnd),
- scsi_prot_sg_count(scsi_cmnd),
- datadir);
- scsi_dma_unmap(scsi_cmnd);
- return 1;
- }
+
+ /*
+ * There is a minimun of 4 BPLs used for every
+ * protection data segment.
+ */
+ if ((lpfc_cmd->prot_seg_cnt * 4) >
+ (phba->cfg_total_seg_cnt - 2))
+ goto err;
num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl,
datasegcnt, protsegcnt);
/* we should have 3 or more entries in buffer list */
- if (num_bde < 3)
+ if ((num_bde < 3) ||
+ (num_bde > phba->cfg_total_seg_cnt))
goto err;
break;
- }
+
case LPFC_PG_TYPE_INVALID:
default:
+ scsi_dma_unmap(scsi_cmnd);
+ lpfc_cmd->seg_cnt = 0;
+
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
"9022 Unexpected protection group %i\n",
prot_group_type);
@@ -2814,10 +2851,22 @@
return 0;
err:
+ if (lpfc_cmd->seg_cnt)
+ scsi_dma_unmap(scsi_cmnd);
+ if (lpfc_cmd->prot_seg_cnt)
+ dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd),
+ scsi_prot_sg_count(scsi_cmnd),
+ scsi_cmnd->sc_data_direction);
+
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
- "9023 Could not setup all needed BDE's"
- "prot_group_type=%d, num_bde=%d\n",
+ "9023 Cannot setup S/G List for HBA"
+ "IO segs %d/%d BPL %d SCSI %d: %d %d\n",
+ lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt,
+ phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt,
prot_group_type, num_bde);
+
+ lpfc_cmd->seg_cnt = 0;
+ lpfc_cmd->prot_seg_cnt = 0;
return 1;
}
@@ -3255,6 +3304,7 @@
"dma_map_sg. Config %d, seg_cnt %d\n",
__func__, phba->cfg_sg_seg_cnt,
lpfc_cmd->seg_cnt);
+ lpfc_cmd->seg_cnt = 0;
scsi_dma_unmap(scsi_cmnd);
return 1;
}
@@ -3376,14 +3426,14 @@
struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
struct sli4_sge *sgl = (struct sli4_sge *)(lpfc_cmd->fcp_bpl);
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
- uint32_t num_bde = 0;
+ uint32_t num_sge = 0;
int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
int prot_group_type = 0;
int fcpdl;
/*
* Start the lpfc command prep by bumping the sgl beyond fcp_cmnd
- * fcp_rsp regions to the first data bde entry
+ * fcp_rsp regions to the first data sge entry
*/
if (scsi_sg_count(scsi_cmnd)) {
/*
@@ -3406,28 +3456,28 @@
sgl += 1;
lpfc_cmd->seg_cnt = datasegcnt;
- if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
- lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9087 BLKGRD: %s: Too many sg segments"
- " from dma_map_sg. Config %d, seg_cnt"
- " %d\n",
- __func__, phba->cfg_sg_seg_cnt,
- lpfc_cmd->seg_cnt);
- scsi_dma_unmap(scsi_cmnd);
- return 1;
- }
+
+ /* First check if data segment count from SCSI Layer is good */
+ if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt)
+ goto err;
prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);
switch (prot_group_type) {
case LPFC_PG_TYPE_NO_DIF:
- num_bde = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl,
+ /* Here we need to add a DISEED to the count */
+ if ((lpfc_cmd->seg_cnt + 1) > phba->cfg_total_seg_cnt)
+ goto err;
+
+ num_sge = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl,
datasegcnt);
+
/* we should have 2 or more entries in buffer list */
- if (num_bde < 2)
+ if (num_sge < 2)
goto err;
break;
- case LPFC_PG_TYPE_DIF_BUF:{
+
+ case LPFC_PG_TYPE_DIF_BUF:
/*
* This type indicates that protection buffers are
* passed to the driver, so that needs to be prepared
@@ -3442,31 +3492,28 @@
}
lpfc_cmd->prot_seg_cnt = protsegcnt;
- if (lpfc_cmd->prot_seg_cnt
- > phba->cfg_prot_sg_seg_cnt) {
- lpfc_printf_log(phba, KERN_ERR, LOG_BG,
- "9088 BLKGRD: %s: Too many prot sg "
- "segments from dma_map_sg. Config %d,"
- "prot_seg_cnt %d\n", __func__,
- phba->cfg_prot_sg_seg_cnt,
- lpfc_cmd->prot_seg_cnt);
- dma_unmap_sg(&phba->pcidev->dev,
- scsi_prot_sglist(scsi_cmnd),
- scsi_prot_sg_count(scsi_cmnd),
- datadir);
- scsi_dma_unmap(scsi_cmnd);
- return 1;
- }
+ /*
+ * There is a minimun of 3 SGEs used for every
+ * protection data segment.
+ */
+ if ((lpfc_cmd->prot_seg_cnt * 3) >
+ (phba->cfg_total_seg_cnt - 2))
+ goto err;
- num_bde = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl,
+ num_sge = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl,
datasegcnt, protsegcnt);
+
/* we should have 3 or more entries in buffer list */
- if (num_bde < 3)
+ if ((num_sge < 3) ||
+ (num_sge > phba->cfg_total_seg_cnt))
goto err;
break;
- }
+
case LPFC_PG_TYPE_INVALID:
default:
+ scsi_dma_unmap(scsi_cmnd);
+ lpfc_cmd->seg_cnt = 0;
+
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
"9083 Unexpected protection group %i\n",
prot_group_type);
@@ -3501,10 +3548,22 @@
return 0;
err:
+ if (lpfc_cmd->seg_cnt)
+ scsi_dma_unmap(scsi_cmnd);
+ if (lpfc_cmd->prot_seg_cnt)
+ dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd),
+ scsi_prot_sg_count(scsi_cmnd),
+ scsi_cmnd->sc_data_direction);
+
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
- "9084 Could not setup all needed BDE's"
- "prot_group_type=%d, num_bde=%d\n",
- prot_group_type, num_bde);
+ "9084 Cannot setup S/G List for HBA"
+ "IO segs %d/%d SGL %d SCSI %d: %d %d\n",
+ lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt,
+ phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt,
+ prot_group_type, num_sge);
+
+ lpfc_cmd->seg_cnt = 0;
+ lpfc_cmd->prot_seg_cnt = 0;
return 1;
}
@@ -5317,11 +5376,11 @@
}
num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc);
if (num_to_alloc != num_allocated) {
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
- "0708 Allocation request of %d "
- "command buffers did not succeed. "
- "Allocated %d buffers.\n",
- num_to_alloc, num_allocated);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0708 Allocation request of %d "
+ "command buffers did not succeed. "
+ "Allocated %d buffers.\n",
+ num_to_alloc, num_allocated);
}
if (num_allocated > 0)
phba->total_scsi_bufs += num_allocated;
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index be02b59..347e22c 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -346,11 +346,6 @@
#define SLI4_CT_VFI 2
#define SLI4_CT_FCFI 3
-#define LPFC_SLI4_FL1_MAX_SEGMENT_SIZE 0x10000
-#define LPFC_SLI4_FL1_MAX_BUF_SIZE 0X2000
-#define LPFC_SLI4_MIN_BUF_SIZE 0x400
-#define LPFC_SLI4_MAX_BUF_SIZE 0x20000
-
/*
* SLI4 specific data structures
*/