| /* |
| * |
| * A driver for Nokia Connectivity Card DTL-1 devices |
| * |
| * Copyright (C) 2001-2002 Marcel Holtmann <marcel@holtmann.org> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation; |
| * |
| * Software distributed under the License is distributed on an "AS |
| * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
| * implied. See the License for the specific language governing |
| * rights and limitations under the License. |
| * |
| * The initial developer of the original code is David A. Hinds |
| * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds |
| * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. |
| * |
| */ |
| |
| #include <linux/module.h> |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/ptrace.h> |
| #include <linux/ioport.h> |
| #include <linux/spinlock.h> |
| #include <linux/moduleparam.h> |
| |
| #include <linux/skbuff.h> |
| #include <linux/string.h> |
| #include <linux/serial.h> |
| #include <linux/serial_reg.h> |
| #include <linux/bitops.h> |
| #include <asm/io.h> |
| |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/ciscode.h> |
| #include <pcmcia/ds.h> |
| #include <pcmcia/cisreg.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| |
| |
| /* ======================== Module parameters ======================== */ |
| |
| |
| MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); |
| MODULE_DESCRIPTION("Bluetooth driver for Nokia Connectivity Card DTL-1"); |
| MODULE_LICENSE("GPL"); |
| |
| |
| |
| /* ======================== Local structures ======================== */ |
| |
| |
| struct dtl1_info { |
| struct pcmcia_device *p_dev; |
| |
| struct hci_dev *hdev; |
| |
| spinlock_t lock; /* For serializing operations */ |
| |
| unsigned long flowmask; /* HCI flow mask */ |
| int ri_latch; |
| |
| struct sk_buff_head txq; |
| unsigned long tx_state; |
| |
| unsigned long rx_state; |
| unsigned long rx_count; |
| struct sk_buff *rx_skb; |
| }; |
| |
| |
| static int dtl1_config(struct pcmcia_device *link); |
| |
| |
| /* Transmit states */ |
| #define XMIT_SENDING 1 |
| #define XMIT_WAKEUP 2 |
| #define XMIT_WAITING 8 |
| |
| /* Receiver States */ |
| #define RECV_WAIT_NSH 0 |
| #define RECV_WAIT_DATA 1 |
| |
| |
| struct nsh { |
| u8 type; |
| u8 zero; |
| u16 len; |
| } __packed; /* Nokia Specific Header */ |
| |
| #define NSHL 4 /* Nokia Specific Header Length */ |
| |
| |
| |
| /* ======================== Interrupt handling ======================== */ |
| |
| |
| static int dtl1_write(unsigned int iobase, int fifo_size, __u8 *buf, int len) |
| { |
| int actual = 0; |
| |
| /* Tx FIFO should be empty */ |
| if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) |
| return 0; |
| |
| /* Fill FIFO with current frame */ |
| while ((fifo_size-- > 0) && (actual < len)) { |
| /* Transmit next byte */ |
| outb(buf[actual], iobase + UART_TX); |
| actual++; |
| } |
| |
| return actual; |
| } |
| |
| |
| static void dtl1_write_wakeup(struct dtl1_info *info) |
| { |
| if (!info) { |
| BT_ERR("Unknown device"); |
| return; |
| } |
| |
| if (test_bit(XMIT_WAITING, &(info->tx_state))) { |
| set_bit(XMIT_WAKEUP, &(info->tx_state)); |
| return; |
| } |
| |
| if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) { |
| set_bit(XMIT_WAKEUP, &(info->tx_state)); |
| return; |
| } |
| |
| do { |
| unsigned int iobase = info->p_dev->resource[0]->start; |
| register struct sk_buff *skb; |
| int len; |
| |
| clear_bit(XMIT_WAKEUP, &(info->tx_state)); |
| |
| if (!pcmcia_dev_present(info->p_dev)) |
| return; |
| |
| skb = skb_dequeue(&(info->txq)); |
| if (!skb) |
| break; |
| |
| /* Send frame */ |
| len = dtl1_write(iobase, 32, skb->data, skb->len); |
| |
| if (len == skb->len) { |
| set_bit(XMIT_WAITING, &(info->tx_state)); |
| kfree_skb(skb); |
| } else { |
| skb_pull(skb, len); |
| skb_queue_head(&(info->txq), skb); |
| } |
| |
| info->hdev->stat.byte_tx += len; |
| |
| } while (test_bit(XMIT_WAKEUP, &(info->tx_state))); |
| |
| clear_bit(XMIT_SENDING, &(info->tx_state)); |
| } |
| |
| |
| static void dtl1_control(struct dtl1_info *info, struct sk_buff *skb) |
| { |
| u8 flowmask = *(u8 *)skb->data; |
| int i; |
| |
| printk(KERN_INFO "Bluetooth: Nokia control data ="); |
| for (i = 0; i < skb->len; i++) |
| printk(" %02x", skb->data[i]); |
| |
| printk("\n"); |
| |
| /* transition to active state */ |
| if (((info->flowmask & 0x07) == 0) && ((flowmask & 0x07) != 0)) { |
| clear_bit(XMIT_WAITING, &(info->tx_state)); |
| dtl1_write_wakeup(info); |
| } |
| |
| info->flowmask = flowmask; |
| |
| kfree_skb(skb); |
| } |
| |
| |
| static void dtl1_receive(struct dtl1_info *info) |
| { |
| unsigned int iobase; |
| struct nsh *nsh; |
| int boguscount = 0; |
| |
| if (!info) { |
| BT_ERR("Unknown device"); |
| return; |
| } |
| |
| iobase = info->p_dev->resource[0]->start; |
| |
| do { |
| info->hdev->stat.byte_rx++; |
| |
| /* Allocate packet */ |
| if (info->rx_skb == NULL) { |
| info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); |
| if (!info->rx_skb) { |
| BT_ERR("Can't allocate mem for new packet"); |
| info->rx_state = RECV_WAIT_NSH; |
| info->rx_count = NSHL; |
| return; |
| } |
| } |
| |
| *skb_put(info->rx_skb, 1) = inb(iobase + UART_RX); |
| nsh = (struct nsh *)info->rx_skb->data; |
| |
| info->rx_count--; |
| |
| if (info->rx_count == 0) { |
| |
| switch (info->rx_state) { |
| case RECV_WAIT_NSH: |
| info->rx_state = RECV_WAIT_DATA; |
| info->rx_count = nsh->len + (nsh->len & 0x0001); |
| break; |
| case RECV_WAIT_DATA: |
| bt_cb(info->rx_skb)->pkt_type = nsh->type; |
| |
| /* remove PAD byte if it exists */ |
| if (nsh->len & 0x0001) { |
| info->rx_skb->tail--; |
| info->rx_skb->len--; |
| } |
| |
| /* remove NSH */ |
| skb_pull(info->rx_skb, NSHL); |
| |
| switch (bt_cb(info->rx_skb)->pkt_type) { |
| case 0x80: |
| /* control data for the Nokia Card */ |
| dtl1_control(info, info->rx_skb); |
| break; |
| case 0x82: |
| case 0x83: |
| case 0x84: |
| /* send frame to the HCI layer */ |
| bt_cb(info->rx_skb)->pkt_type &= 0x0f; |
| hci_recv_frame(info->hdev, info->rx_skb); |
| break; |
| default: |
| /* unknown packet */ |
| BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type); |
| kfree_skb(info->rx_skb); |
| break; |
| } |
| |
| info->rx_state = RECV_WAIT_NSH; |
| info->rx_count = NSHL; |
| info->rx_skb = NULL; |
| break; |
| } |
| |
| } |
| |
| /* Make sure we don't stay here too long */ |
| if (boguscount++ > 32) |
| break; |
| |
| } while (inb(iobase + UART_LSR) & UART_LSR_DR); |
| } |
| |
| |
| static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) |
| { |
| struct dtl1_info *info = dev_inst; |
| unsigned int iobase; |
| unsigned char msr; |
| int boguscount = 0; |
| int iir, lsr; |
| irqreturn_t r = IRQ_NONE; |
| |
| if (!info || !info->hdev) |
| /* our irq handler is shared */ |
| return IRQ_NONE; |
| |
| iobase = info->p_dev->resource[0]->start; |
| |
| spin_lock(&(info->lock)); |
| |
| iir = inb(iobase + UART_IIR) & UART_IIR_ID; |
| while (iir) { |
| |
| r = IRQ_HANDLED; |
| /* Clear interrupt */ |
| lsr = inb(iobase + UART_LSR); |
| |
| switch (iir) { |
| case UART_IIR_RLSI: |
| BT_ERR("RLSI"); |
| break; |
| case UART_IIR_RDI: |
| /* Receive interrupt */ |
| dtl1_receive(info); |
| break; |
| case UART_IIR_THRI: |
| if (lsr & UART_LSR_THRE) { |
| /* Transmitter ready for data */ |
| dtl1_write_wakeup(info); |
| } |
| break; |
| default: |
| BT_ERR("Unhandled IIR=%#x", iir); |
| break; |
| } |
| |
| /* Make sure we don't stay here too long */ |
| if (boguscount++ > 100) |
| break; |
| |
| iir = inb(iobase + UART_IIR) & UART_IIR_ID; |
| |
| } |
| |
| msr = inb(iobase + UART_MSR); |
| |
| if (info->ri_latch ^ (msr & UART_MSR_RI)) { |
| info->ri_latch = msr & UART_MSR_RI; |
| clear_bit(XMIT_WAITING, &(info->tx_state)); |
| dtl1_write_wakeup(info); |
| r = IRQ_HANDLED; |
| } |
| |
| spin_unlock(&(info->lock)); |
| |
| return r; |
| } |
| |
| |
| |
| /* ======================== HCI interface ======================== */ |
| |
| |
| static int dtl1_hci_open(struct hci_dev *hdev) |
| { |
| set_bit(HCI_RUNNING, &(hdev->flags)); |
| |
| return 0; |
| } |
| |
| |
| static int dtl1_hci_flush(struct hci_dev *hdev) |
| { |
| struct dtl1_info *info = hci_get_drvdata(hdev); |
| |
| /* Drop TX queue */ |
| skb_queue_purge(&(info->txq)); |
| |
| return 0; |
| } |
| |
| |
| static int dtl1_hci_close(struct hci_dev *hdev) |
| { |
| if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags))) |
| return 0; |
| |
| dtl1_hci_flush(hdev); |
| |
| return 0; |
| } |
| |
| |
| static int dtl1_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct dtl1_info *info = hci_get_drvdata(hdev); |
| struct sk_buff *s; |
| struct nsh nsh; |
| |
| switch (bt_cb(skb)->pkt_type) { |
| case HCI_COMMAND_PKT: |
| hdev->stat.cmd_tx++; |
| nsh.type = 0x81; |
| break; |
| case HCI_ACLDATA_PKT: |
| hdev->stat.acl_tx++; |
| nsh.type = 0x82; |
| break; |
| case HCI_SCODATA_PKT: |
| hdev->stat.sco_tx++; |
| nsh.type = 0x83; |
| break; |
| default: |
| return -EILSEQ; |
| } |
| |
| nsh.zero = 0; |
| nsh.len = skb->len; |
| |
| s = bt_skb_alloc(NSHL + skb->len + 1, GFP_ATOMIC); |
| if (!s) |
| return -ENOMEM; |
| |
| skb_reserve(s, NSHL); |
| skb_copy_from_linear_data(skb, skb_put(s, skb->len), skb->len); |
| if (skb->len & 0x0001) |
| *skb_put(s, 1) = 0; /* PAD */ |
| |
| /* Prepend skb with Nokia frame header and queue */ |
| memcpy(skb_push(s, NSHL), &nsh, NSHL); |
| skb_queue_tail(&(info->txq), s); |
| |
| dtl1_write_wakeup(info); |
| |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| |
| |
| /* ======================== Card services HCI interaction ======================== */ |
| |
| |
| static int dtl1_open(struct dtl1_info *info) |
| { |
| unsigned long flags; |
| unsigned int iobase = info->p_dev->resource[0]->start; |
| struct hci_dev *hdev; |
| |
| spin_lock_init(&(info->lock)); |
| |
| skb_queue_head_init(&(info->txq)); |
| |
| info->rx_state = RECV_WAIT_NSH; |
| info->rx_count = NSHL; |
| info->rx_skb = NULL; |
| |
| set_bit(XMIT_WAITING, &(info->tx_state)); |
| |
| /* Initialize HCI device */ |
| hdev = hci_alloc_dev(); |
| if (!hdev) { |
| BT_ERR("Can't allocate HCI device"); |
| return -ENOMEM; |
| } |
| |
| info->hdev = hdev; |
| |
| hdev->bus = HCI_PCCARD; |
| hci_set_drvdata(hdev, info); |
| SET_HCIDEV_DEV(hdev, &info->p_dev->dev); |
| |
| hdev->open = dtl1_hci_open; |
| hdev->close = dtl1_hci_close; |
| hdev->flush = dtl1_hci_flush; |
| hdev->send = dtl1_hci_send_frame; |
| |
| spin_lock_irqsave(&(info->lock), flags); |
| |
| /* Reset UART */ |
| outb(0, iobase + UART_MCR); |
| |
| /* Turn off interrupts */ |
| outb(0, iobase + UART_IER); |
| |
| /* Initialize UART */ |
| outb(UART_LCR_WLEN8, iobase + UART_LCR); /* Reset DLAB */ |
| outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR); |
| |
| info->ri_latch = inb(info->p_dev->resource[0]->start + UART_MSR) |
| & UART_MSR_RI; |
| |
| /* Turn on interrupts */ |
| outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); |
| |
| spin_unlock_irqrestore(&(info->lock), flags); |
| |
| /* Timeout before it is safe to send the first HCI packet */ |
| msleep(2000); |
| |
| /* Register HCI device */ |
| if (hci_register_dev(hdev) < 0) { |
| BT_ERR("Can't register HCI device"); |
| info->hdev = NULL; |
| hci_free_dev(hdev); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int dtl1_close(struct dtl1_info *info) |
| { |
| unsigned long flags; |
| unsigned int iobase = info->p_dev->resource[0]->start; |
| struct hci_dev *hdev = info->hdev; |
| |
| if (!hdev) |
| return -ENODEV; |
| |
| dtl1_hci_close(hdev); |
| |
| spin_lock_irqsave(&(info->lock), flags); |
| |
| /* Reset UART */ |
| outb(0, iobase + UART_MCR); |
| |
| /* Turn off interrupts */ |
| outb(0, iobase + UART_IER); |
| |
| spin_unlock_irqrestore(&(info->lock), flags); |
| |
| hci_unregister_dev(hdev); |
| hci_free_dev(hdev); |
| |
| return 0; |
| } |
| |
| static int dtl1_probe(struct pcmcia_device *link) |
| { |
| struct dtl1_info *info; |
| |
| /* Create new info device */ |
| info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| info->p_dev = link; |
| link->priv = info; |
| |
| link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; |
| |
| return dtl1_config(link); |
| } |
| |
| |
| static void dtl1_detach(struct pcmcia_device *link) |
| { |
| struct dtl1_info *info = link->priv; |
| |
| dtl1_close(info); |
| pcmcia_disable_device(link); |
| } |
| |
| static int dtl1_confcheck(struct pcmcia_device *p_dev, void *priv_data) |
| { |
| if ((p_dev->resource[1]->end) || (p_dev->resource[1]->end < 8)) |
| return -ENODEV; |
| |
| p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; |
| p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; |
| |
| return pcmcia_request_io(p_dev); |
| } |
| |
| static int dtl1_config(struct pcmcia_device *link) |
| { |
| struct dtl1_info *info = link->priv; |
| int ret; |
| |
| /* Look for a generic full-sized window */ |
| link->resource[0]->end = 8; |
| ret = pcmcia_loop_config(link, dtl1_confcheck, NULL); |
| if (ret) |
| goto failed; |
| |
| ret = pcmcia_request_irq(link, dtl1_interrupt); |
| if (ret) |
| goto failed; |
| |
| ret = pcmcia_enable_device(link); |
| if (ret) |
| goto failed; |
| |
| ret = dtl1_open(info); |
| if (ret) |
| goto failed; |
| |
| return 0; |
| |
| failed: |
| dtl1_detach(link); |
| return ret; |
| } |
| |
| static const struct pcmcia_device_id dtl1_ids[] = { |
| PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-1", 0xe1bfdd64, 0xe168480d), |
| PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-4", 0xe1bfdd64, 0x9102bc82), |
| PCMCIA_DEVICE_PROD_ID12("Socket", "CF", 0xb38bcc2e, 0x44ebf863), |
| PCMCIA_DEVICE_PROD_ID12("Socket", "CF+ Personal Network Card", 0xb38bcc2e, 0xe732bae3), |
| PCMCIA_DEVICE_NULL |
| }; |
| MODULE_DEVICE_TABLE(pcmcia, dtl1_ids); |
| |
| static struct pcmcia_driver dtl1_driver = { |
| .owner = THIS_MODULE, |
| .name = "dtl1_cs", |
| .probe = dtl1_probe, |
| .remove = dtl1_detach, |
| .id_table = dtl1_ids, |
| }; |
| module_pcmcia_driver(dtl1_driver); |