PCI: imx6: Factor out PHY reset
Split the PCIe PHY reset from the link up function to make the code a
little more structured.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Frank Li <lznuaa@gmail.com>
Cc: Harro Haan <hrhaan@gmail.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Mohit KUMAR <Mohit.KUMAR@st.com>
Cc: Pratyush Anand <pratyush.anand@st.com>
Cc: Richard Zhu <r65037@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sean Cross <xobs@kosagi.com>
Cc: Siva Reddy Kallam <siva.kallam@samsung.com>
Cc: Srikanth T Shivanand <ts.srikanth@samsung.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Yinghai Lu <yinghai@kernel.org>
diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index 5634a33..25dde2c 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -336,9 +336,26 @@
return;
}
+static void imx6_pcie_reset_phy(struct pcie_port *pp)
+{
+ uint32_t temp;
+
+ pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &temp);
+ temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
+ PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+ pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, temp);
+
+ usleep_range(2000, 3000);
+
+ pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &temp);
+ temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
+ PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+ pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, temp);
+}
+
static int imx6_pcie_link_up(struct pcie_port *pp)
{
- u32 rc, ltssm, rx_valid, temp;
+ u32 rc, ltssm, rx_valid;
/*
* Test if the PHY reports that the link is up and also that
@@ -370,21 +387,7 @@
dev_err(pp->dev, "transition to gen2 is stuck, reset PHY!\n");
- pcie_phy_read(pp->dbi_base,
- PHY_RX_OVRD_IN_LO, &temp);
- temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN
- | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
- pcie_phy_write(pp->dbi_base,
- PHY_RX_OVRD_IN_LO, temp);
-
- usleep_range(2000, 3000);
-
- pcie_phy_read(pp->dbi_base,
- PHY_RX_OVRD_IN_LO, &temp);
- temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN
- | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
- pcie_phy_write(pp->dbi_base,
- PHY_RX_OVRD_IN_LO, temp);
+ imx6_pcie_reset_phy(pp);
return 0;
}