[PARISC] Move LBA and SBA register defines to the common ropes.h
header. This will allow the use of more constants in the
agpgart driver.
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 12776b7..eed99bd 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -89,101 +89,6 @@
#define DEFAULT_DMA_HINT_REG 0
-#define SBA_FUNC_ID 0x0000 /* function id */
-#define SBA_FCLASS 0x0008 /* function class, bist, header, rev... */
-
-#define SBA_FUNC_SIZE 4096 /* SBA configuration function reg set */
-
-#define ASTRO_IOC_OFFSET (32 * SBA_FUNC_SIZE)
-#define PLUTO_IOC_OFFSET (1 * SBA_FUNC_SIZE)
-/* Ike's IOC's occupy functions 2 and 3 */
-#define IKE_IOC_OFFSET(p) ((p+2) * SBA_FUNC_SIZE)
-
-#define IOC_CTRL 0x8 /* IOC_CTRL offset */
-#define IOC_CTRL_TC (1 << 0) /* TOC Enable */
-#define IOC_CTRL_CE (1 << 1) /* Coalesce Enable */
-#define IOC_CTRL_DE (1 << 2) /* Dillon Enable */
-#define IOC_CTRL_RM (1 << 8) /* Real Mode */
-#define IOC_CTRL_NC (1 << 9) /* Non Coherent Mode */
-#define IOC_CTRL_D4 (1 << 11) /* Disable 4-byte coalescing */
-#define IOC_CTRL_DD (1 << 13) /* Disable distr. LMMIO range coalescing */
-
-
-/*
-** Offsets into MBIB (Function 0 on Ike and hopefully Astro)
-** Firmware programs this stuff. Don't touch it.
-*/
-#define LMMIO_DIRECT0_BASE 0x300
-#define LMMIO_DIRECT0_MASK 0x308
-#define LMMIO_DIRECT0_ROUTE 0x310
-
-#define LMMIO_DIST_BASE 0x360
-#define LMMIO_DIST_MASK 0x368
-#define LMMIO_DIST_ROUTE 0x370
-
-#define IOS_DIST_BASE 0x390
-#define IOS_DIST_MASK 0x398
-#define IOS_DIST_ROUTE 0x3A0
-
-#define IOS_DIRECT_BASE 0x3C0
-#define IOS_DIRECT_MASK 0x3C8
-#define IOS_DIRECT_ROUTE 0x3D0
-
-/*
-** Offsets into I/O TLB (Function 2 and 3 on Ike)
-*/
-#define ROPE0_CTL 0x200 /* "regbus pci0" */
-#define ROPE1_CTL 0x208
-#define ROPE2_CTL 0x210
-#define ROPE3_CTL 0x218
-#define ROPE4_CTL 0x220
-#define ROPE5_CTL 0x228
-#define ROPE6_CTL 0x230
-#define ROPE7_CTL 0x238
-
-#define IOC_ROPE0_CFG 0x500 /* pluto only */
-#define IOC_ROPE_AO 0x10 /* Allow "Relaxed Ordering" */
-
-
-
-#define HF_ENABLE 0x40
-
-
-#define IOC_IBASE 0x300 /* IO TLB */
-#define IOC_IMASK 0x308
-#define IOC_PCOM 0x310
-#define IOC_TCNFG 0x318
-#define IOC_PDIR_BASE 0x320
-
-
-/*
-** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
-** It's safer (avoid memory corruption) to keep DMA page mappings
-** equivalently sized to VM PAGE_SIZE.
-**
-** We really can't avoid generating a new mapping for each
-** page since the Virtual Coherence Index has to be generated
-** and updated for each page.
-**
-** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse.
-*/
-#define IOVP_SIZE PAGE_SIZE
-#define IOVP_SHIFT PAGE_SHIFT
-#define IOVP_MASK PAGE_MASK
-
-#define SBA_PERF_CFG 0x708 /* Performance Counter stuff */
-#define SBA_PERF_MASK1 0x718
-#define SBA_PERF_MASK2 0x730
-
-
-/*
-** Offsets into PCI Performance Counters (functions 12 and 13)
-** Controlled by PERF registers in function 2 & 3 respectively.
-*/
-#define SBA_PERF_CNT1 0x200
-#define SBA_PERF_CNT2 0x208
-#define SBA_PERF_CNT3 0x210
-
static struct sba_device *sba_list;
static unsigned long ioc_needs_fdc = 0;
@@ -638,7 +543,7 @@
asm("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
pa |= (ci >> 12) & 0xff; /* move CI (8 bits) into lowest byte */
- pa |= 0x8000000000000000ULL; /* set "valid" bit */
+ pa |= SBA_PDIR_VALID_BIT; /* set "valid" bit */
*pdir_ptr = cpu_to_le64(pa); /* swap and store into I/O Pdir */
/*