| /* vio.c: Virtual I/O channel devices probing infrastructure. |
| * |
| * Copyright (c) 2003-2005 IBM Corp. |
| * Dave Engebretsen engebret@us.ibm.com |
| * Santiago Leon santil@us.ibm.com |
| * Hollis Blanchard <hollisb@us.ibm.com> |
| * Stephen Rothwell |
| * |
| * Adapted to sparc64 by David S. Miller davem@davemloft.net |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/irq.h> |
| #include <linux/init.h> |
| |
| #include <asm/mdesc.h> |
| #include <asm/vio.h> |
| |
| static const struct vio_device_id *vio_match_device( |
| const struct vio_device_id *matches, |
| const struct vio_dev *dev) |
| { |
| const char *type, *compat; |
| int len; |
| |
| type = dev->type; |
| compat = dev->compat; |
| len = dev->compat_len; |
| |
| while (matches->type[0] || matches->compat[0]) { |
| int match = 1; |
| if (matches->type[0]) |
| match &= !strcmp(matches->type, type); |
| |
| if (matches->compat[0]) { |
| match &= len && |
| of_find_in_proplist(compat, matches->compat, len); |
| } |
| if (match) |
| return matches; |
| matches++; |
| } |
| return NULL; |
| } |
| |
| static int vio_bus_match(struct device *dev, struct device_driver *drv) |
| { |
| struct vio_dev *vio_dev = to_vio_dev(dev); |
| struct vio_driver *vio_drv = to_vio_driver(drv); |
| const struct vio_device_id *matches = vio_drv->id_table; |
| |
| if (!matches) |
| return 0; |
| |
| return vio_match_device(matches, vio_dev) != NULL; |
| } |
| |
| static int vio_device_probe(struct device *dev) |
| { |
| struct vio_dev *vdev = to_vio_dev(dev); |
| struct vio_driver *drv = to_vio_driver(dev->driver); |
| const struct vio_device_id *id; |
| int error = -ENODEV; |
| |
| if (drv->probe) { |
| id = vio_match_device(drv->id_table, vdev); |
| if (id) |
| error = drv->probe(vdev, id); |
| } |
| |
| return error; |
| } |
| |
| static int vio_device_remove(struct device *dev) |
| { |
| struct vio_dev *vdev = to_vio_dev(dev); |
| struct vio_driver *drv = to_vio_driver(dev->driver); |
| |
| if (drv->remove) |
| return drv->remove(vdev); |
| |
| return 1; |
| } |
| |
| static ssize_t devspec_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct vio_dev *vdev = to_vio_dev(dev); |
| const char *str = "none"; |
| |
| if (!strcmp(vdev->type, "vnet-port")) |
| str = "vnet"; |
| else if (!strcmp(vdev->type, "vdc-port")) |
| str = "vdisk"; |
| |
| return sprintf(buf, "%s\n", str); |
| } |
| |
| static ssize_t type_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct vio_dev *vdev = to_vio_dev(dev); |
| return sprintf(buf, "%s\n", vdev->type); |
| } |
| |
| static struct device_attribute vio_dev_attrs[] = { |
| __ATTR_RO(devspec), |
| __ATTR_RO(type), |
| __ATTR_NULL |
| }; |
| |
| static struct bus_type vio_bus_type = { |
| .name = "vio", |
| .dev_attrs = vio_dev_attrs, |
| .match = vio_bus_match, |
| .probe = vio_device_probe, |
| .remove = vio_device_remove, |
| }; |
| |
| int vio_register_driver(struct vio_driver *viodrv) |
| { |
| viodrv->driver.bus = &vio_bus_type; |
| |
| return driver_register(&viodrv->driver); |
| } |
| EXPORT_SYMBOL(vio_register_driver); |
| |
| void vio_unregister_driver(struct vio_driver *viodrv) |
| { |
| driver_unregister(&viodrv->driver); |
| } |
| EXPORT_SYMBOL(vio_unregister_driver); |
| |
| static void vio_dev_release(struct device *dev) |
| { |
| kfree(to_vio_dev(dev)); |
| } |
| |
| static ssize_t |
| show_pciobppath_attr(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct vio_dev *vdev; |
| struct device_node *dp; |
| |
| vdev = to_vio_dev(dev); |
| dp = vdev->dp; |
| |
| return snprintf (buf, PAGE_SIZE, "%s\n", dp->full_name); |
| } |
| |
| static DEVICE_ATTR(obppath, S_IRUSR | S_IRGRP | S_IROTH, |
| show_pciobppath_attr, NULL); |
| |
| static struct device_node *cdev_node; |
| |
| static struct vio_dev *root_vdev; |
| static u64 cdev_cfg_handle; |
| |
| static void vio_fill_channel_info(struct mdesc_handle *hp, u64 mp, |
| struct vio_dev *vdev) |
| { |
| u64 a; |
| |
| mdesc_for_each_arc(a, hp, mp, MDESC_ARC_TYPE_FWD) { |
| const u64 *chan_id; |
| const u64 *irq; |
| u64 target; |
| |
| target = mdesc_arc_target(hp, a); |
| |
| irq = mdesc_get_property(hp, target, "tx-ino", NULL); |
| if (irq) |
| vdev->tx_irq = sun4v_build_virq(cdev_cfg_handle, *irq); |
| |
| irq = mdesc_get_property(hp, target, "rx-ino", NULL); |
| if (irq) |
| vdev->rx_irq = sun4v_build_virq(cdev_cfg_handle, *irq); |
| |
| chan_id = mdesc_get_property(hp, target, "id", NULL); |
| if (chan_id) |
| vdev->channel_id = *chan_id; |
| } |
| } |
| |
| static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp, |
| struct device *parent) |
| { |
| const char *type, *compat, *bus_id_name; |
| struct device_node *dp; |
| struct vio_dev *vdev; |
| int err, tlen, clen; |
| const u64 *id, *cfg_handle; |
| u64 a; |
| |
| type = mdesc_get_property(hp, mp, "device-type", &tlen); |
| if (!type) { |
| type = mdesc_get_property(hp, mp, "name", &tlen); |
| if (!type) { |
| type = mdesc_node_name(hp, mp); |
| tlen = strlen(type) + 1; |
| } |
| } |
| if (tlen > VIO_MAX_TYPE_LEN) { |
| printk(KERN_ERR "VIO: Type string [%s] is too long.\n", |
| type); |
| return NULL; |
| } |
| |
| id = mdesc_get_property(hp, mp, "id", NULL); |
| |
| cfg_handle = NULL; |
| mdesc_for_each_arc(a, hp, mp, MDESC_ARC_TYPE_BACK) { |
| u64 target; |
| |
| target = mdesc_arc_target(hp, a); |
| cfg_handle = mdesc_get_property(hp, target, |
| "cfg-handle", NULL); |
| if (cfg_handle) |
| break; |
| } |
| |
| bus_id_name = type; |
| if (!strcmp(type, "domain-services-port")) |
| bus_id_name = "ds"; |
| |
| /* |
| * 20 char is the old driver-core name size limit, which is no more. |
| * This check can probably be removed after review and possible |
| * adaption of the vio users name length handling. |
| */ |
| if (strlen(bus_id_name) >= 20 - 4) { |
| printk(KERN_ERR "VIO: bus_id_name [%s] is too long.\n", |
| bus_id_name); |
| return NULL; |
| } |
| |
| compat = mdesc_get_property(hp, mp, "device-type", &clen); |
| if (!compat) { |
| clen = 0; |
| } else if (clen > VIO_MAX_COMPAT_LEN) { |
| printk(KERN_ERR "VIO: Compat len %d for [%s] is too long.\n", |
| clen, type); |
| return NULL; |
| } |
| |
| vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); |
| if (!vdev) { |
| printk(KERN_ERR "VIO: Could not allocate vio_dev\n"); |
| return NULL; |
| } |
| |
| vdev->mp = mp; |
| memcpy(vdev->type, type, tlen); |
| if (compat) |
| memcpy(vdev->compat, compat, clen); |
| else |
| memset(vdev->compat, 0, sizeof(vdev->compat)); |
| vdev->compat_len = clen; |
| |
| vdev->channel_id = ~0UL; |
| vdev->tx_irq = ~0; |
| vdev->rx_irq = ~0; |
| |
| vio_fill_channel_info(hp, mp, vdev); |
| |
| if (!id) { |
| dev_set_name(&vdev->dev, "%s", bus_id_name); |
| vdev->dev_no = ~(u64)0; |
| } else if (!cfg_handle) { |
| dev_set_name(&vdev->dev, "%s-%llu", bus_id_name, *id); |
| vdev->dev_no = *id; |
| } else { |
| dev_set_name(&vdev->dev, "%s-%llu-%llu", bus_id_name, |
| *cfg_handle, *id); |
| vdev->dev_no = *cfg_handle; |
| } |
| |
| vdev->dev.parent = parent; |
| vdev->dev.bus = &vio_bus_type; |
| vdev->dev.release = vio_dev_release; |
| |
| if (parent == NULL) { |
| dp = cdev_node; |
| } else if (to_vio_dev(parent) == root_vdev) { |
| dp = of_get_next_child(cdev_node, NULL); |
| while (dp) { |
| if (!strcmp(dp->type, type)) |
| break; |
| |
| dp = of_get_next_child(cdev_node, dp); |
| } |
| } else { |
| dp = to_vio_dev(parent)->dp; |
| } |
| vdev->dp = dp; |
| |
| printk(KERN_INFO "VIO: Adding device %s\n", dev_name(&vdev->dev)); |
| |
| err = device_register(&vdev->dev); |
| if (err) { |
| printk(KERN_ERR "VIO: Could not register device %s, err=%d\n", |
| dev_name(&vdev->dev), err); |
| kfree(vdev); |
| return NULL; |
| } |
| if (vdev->dp) |
| err = sysfs_create_file(&vdev->dev.kobj, |
| &dev_attr_obppath.attr); |
| |
| return vdev; |
| } |
| |
| static void vio_add(struct mdesc_handle *hp, u64 node) |
| { |
| (void) vio_create_one(hp, node, &root_vdev->dev); |
| } |
| |
| static int vio_md_node_match(struct device *dev, void *arg) |
| { |
| struct vio_dev *vdev = to_vio_dev(dev); |
| |
| if (vdev->mp == (u64) arg) |
| return 1; |
| |
| return 0; |
| } |
| |
| static void vio_remove(struct mdesc_handle *hp, u64 node) |
| { |
| struct device *dev; |
| |
| dev = device_find_child(&root_vdev->dev, (void *) node, |
| vio_md_node_match); |
| if (dev) { |
| printk(KERN_INFO "VIO: Removing device %s\n", dev_name(dev)); |
| |
| device_unregister(dev); |
| } |
| } |
| |
| static struct mdesc_notifier_client vio_device_notifier = { |
| .add = vio_add, |
| .remove = vio_remove, |
| .node_name = "virtual-device-port", |
| }; |
| |
| /* We are only interested in domain service ports under the |
| * "domain-services" node. On control nodes there is another port |
| * under "openboot" that we should not mess with as aparently that is |
| * reserved exclusively for OBP use. |
| */ |
| static void vio_add_ds(struct mdesc_handle *hp, u64 node) |
| { |
| int found; |
| u64 a; |
| |
| found = 0; |
| mdesc_for_each_arc(a, hp, node, MDESC_ARC_TYPE_BACK) { |
| u64 target = mdesc_arc_target(hp, a); |
| const char *name = mdesc_node_name(hp, target); |
| |
| if (!strcmp(name, "domain-services")) { |
| found = 1; |
| break; |
| } |
| } |
| |
| if (found) |
| (void) vio_create_one(hp, node, &root_vdev->dev); |
| } |
| |
| static struct mdesc_notifier_client vio_ds_notifier = { |
| .add = vio_add_ds, |
| .remove = vio_remove, |
| .node_name = "domain-services-port", |
| }; |
| |
| static const char *channel_devices_node = "channel-devices"; |
| static const char *channel_devices_compat = "SUNW,sun4v-channel-devices"; |
| static const char *cfg_handle_prop = "cfg-handle"; |
| |
| static int __init vio_init(void) |
| { |
| struct mdesc_handle *hp; |
| const char *compat; |
| const u64 *cfg_handle; |
| int err, len; |
| u64 root; |
| |
| err = bus_register(&vio_bus_type); |
| if (err) { |
| printk(KERN_ERR "VIO: Could not register bus type err=%d\n", |
| err); |
| return err; |
| } |
| |
| hp = mdesc_grab(); |
| if (!hp) |
| return 0; |
| |
| root = mdesc_node_by_name(hp, MDESC_NODE_NULL, channel_devices_node); |
| if (root == MDESC_NODE_NULL) { |
| printk(KERN_INFO "VIO: No channel-devices MDESC node.\n"); |
| mdesc_release(hp); |
| return 0; |
| } |
| |
| cdev_node = of_find_node_by_name(NULL, "channel-devices"); |
| err = -ENODEV; |
| if (!cdev_node) { |
| printk(KERN_INFO "VIO: No channel-devices OBP node.\n"); |
| goto out_release; |
| } |
| |
| compat = mdesc_get_property(hp, root, "compatible", &len); |
| if (!compat) { |
| printk(KERN_ERR "VIO: Channel devices lacks compatible " |
| "property\n"); |
| goto out_release; |
| } |
| if (!of_find_in_proplist(compat, channel_devices_compat, len)) { |
| printk(KERN_ERR "VIO: Channel devices node lacks (%s) " |
| "compat entry.\n", channel_devices_compat); |
| goto out_release; |
| } |
| |
| cfg_handle = mdesc_get_property(hp, root, cfg_handle_prop, NULL); |
| if (!cfg_handle) { |
| printk(KERN_ERR "VIO: Channel devices lacks %s property\n", |
| cfg_handle_prop); |
| goto out_release; |
| } |
| |
| cdev_cfg_handle = *cfg_handle; |
| |
| root_vdev = vio_create_one(hp, root, NULL); |
| err = -ENODEV; |
| if (!root_vdev) { |
| printk(KERN_ERR "VIO: Coult not create root device.\n"); |
| goto out_release; |
| } |
| |
| mdesc_register_notifier(&vio_device_notifier); |
| mdesc_register_notifier(&vio_ds_notifier); |
| |
| mdesc_release(hp); |
| |
| return err; |
| |
| out_release: |
| mdesc_release(hp); |
| return err; |
| } |
| |
| postcore_initcall(vio_init); |