| /*====================================================================== |
| fmvj18x_cs.c 2.8 2002/03/23 |
| |
| A fmvj18x (and its compatibles) PCMCIA client driver |
| |
| Contributed by Shingo Fujimoto, shingo@flab.fujitsu.co.jp |
| |
| TDK LAK-CD021 and CONTEC C-NET(PC)C support added by |
| Nobuhiro Katayama, kata-n@po.iijnet.or.jp |
| |
| The PCMCIA client code is based on code written by David Hinds. |
| Network code is based on the "FMV-18x driver" by Yutaka TAMIYA |
| but is actually largely Donald Becker's AT1700 driver, which |
| carries the following attribution: |
| |
| Written 1993-94 by Donald Becker. |
| |
| Copyright 1993 United States Government as represented by the |
| Director, National Security Agency. |
| |
| This software may be used and distributed according to the terms |
| of the GNU General Public License, incorporated herein by reference. |
| |
| The author may be reached as becker@scyld.com, or C/O |
| Scyld Computing Corporation |
| 410 Severn Ave., Suite 210 |
| Annapolis MD 21403 |
| |
| ======================================================================*/ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #define DRV_NAME "fmvj18x_cs" |
| #define DRV_VERSION "2.9" |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/interrupt.h> |
| #include <linux/in.h> |
| #include <linux/delay.h> |
| #include <linux/ethtool.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/if_arp.h> |
| #include <linux/ioport.h> |
| #include <linux/crc32.h> |
| |
| #include <pcmcia/cs.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/ciscode.h> |
| #include <pcmcia/ds.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| #include <asm/system.h> |
| |
| /*====================================================================*/ |
| |
| /* Module parameters */ |
| |
| MODULE_DESCRIPTION("fmvj18x and compatible PCMCIA ethernet driver"); |
| MODULE_LICENSE("GPL"); |
| |
| #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) |
| |
| /* SRAM configuration */ |
| /* 0:4KB*2 TX buffer else:8KB*2 TX buffer */ |
| INT_MODULE_PARM(sram_config, 0); |
| |
| |
| /*====================================================================*/ |
| /* |
| PCMCIA event handlers |
| */ |
| static int fmvj18x_config(struct pcmcia_device *link); |
| static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id); |
| static int fmvj18x_setup_mfc(struct pcmcia_device *link); |
| static void fmvj18x_release(struct pcmcia_device *link); |
| static void fmvj18x_detach(struct pcmcia_device *p_dev); |
| |
| /* |
| LAN controller(MBH86960A) specific routines |
| */ |
| static int fjn_config(struct net_device *dev, struct ifmap *map); |
| static int fjn_open(struct net_device *dev); |
| static int fjn_close(struct net_device *dev); |
| static netdev_tx_t fjn_start_xmit(struct sk_buff *skb, |
| struct net_device *dev); |
| static irqreturn_t fjn_interrupt(int irq, void *dev_id); |
| static void fjn_rx(struct net_device *dev); |
| static void fjn_reset(struct net_device *dev); |
| static void set_rx_mode(struct net_device *dev); |
| static void fjn_tx_timeout(struct net_device *dev); |
| static const struct ethtool_ops netdev_ethtool_ops; |
| |
| /* |
| card type |
| */ |
| typedef enum { MBH10302, MBH10304, TDK, CONTEC, LA501, UNGERMANN, |
| XXX10304, NEC, KME |
| } cardtype_t; |
| |
| /* |
| driver specific data structure |
| */ |
| typedef struct local_info_t { |
| struct pcmcia_device *p_dev; |
| long open_time; |
| uint tx_started:1; |
| uint tx_queue; |
| u_short tx_queue_len; |
| cardtype_t cardtype; |
| u_short sent; |
| u_char __iomem *base; |
| } local_info_t; |
| |
| #define MC_FILTERBREAK 64 |
| |
| /*====================================================================*/ |
| /* |
| ioport offset from the base address |
| */ |
| #define TX_STATUS 0 /* transmit status register */ |
| #define RX_STATUS 1 /* receive status register */ |
| #define TX_INTR 2 /* transmit interrupt mask register */ |
| #define RX_INTR 3 /* receive interrupt mask register */ |
| #define TX_MODE 4 /* transmit mode register */ |
| #define RX_MODE 5 /* receive mode register */ |
| #define CONFIG_0 6 /* configuration register 0 */ |
| #define CONFIG_1 7 /* configuration register 1 */ |
| |
| #define NODE_ID 8 /* node ID register (bank 0) */ |
| #define MAR_ADR 8 /* multicast address registers (bank 1) */ |
| |
| #define DATAPORT 8 /* buffer mem port registers (bank 2) */ |
| #define TX_START 10 /* transmit start register */ |
| #define COL_CTRL 11 /* 16 collision control register */ |
| #define BMPR12 12 /* reserved */ |
| #define BMPR13 13 /* reserved */ |
| #define RX_SKIP 14 /* skip received packet register */ |
| |
| #define LAN_CTRL 16 /* LAN card control register */ |
| |
| #define MAC_ID 0x1a /* hardware address */ |
| #define UNGERMANN_MAC_ID 0x18 /* UNGERMANN-BASS hardware address */ |
| |
| /* |
| control bits |
| */ |
| #define ENA_TMT_OK 0x80 |
| #define ENA_TMT_REC 0x20 |
| #define ENA_COL 0x04 |
| #define ENA_16_COL 0x02 |
| #define ENA_TBUS_ERR 0x01 |
| |
| #define ENA_PKT_RDY 0x80 |
| #define ENA_BUS_ERR 0x40 |
| #define ENA_LEN_ERR 0x08 |
| #define ENA_ALG_ERR 0x04 |
| #define ENA_CRC_ERR 0x02 |
| #define ENA_OVR_FLO 0x01 |
| |
| /* flags */ |
| #define F_TMT_RDY 0x80 /* can accept new packet */ |
| #define F_NET_BSY 0x40 /* carrier is detected */ |
| #define F_TMT_OK 0x20 /* send packet successfully */ |
| #define F_SRT_PKT 0x10 /* short packet error */ |
| #define F_COL_ERR 0x04 /* collision error */ |
| #define F_16_COL 0x02 /* 16 collision error */ |
| #define F_TBUS_ERR 0x01 /* bus read error */ |
| |
| #define F_PKT_RDY 0x80 /* packet(s) in buffer */ |
| #define F_BUS_ERR 0x40 /* bus read error */ |
| #define F_LEN_ERR 0x08 /* short packet */ |
| #define F_ALG_ERR 0x04 /* frame error */ |
| #define F_CRC_ERR 0x02 /* CRC error */ |
| #define F_OVR_FLO 0x01 /* overflow error */ |
| |
| #define F_BUF_EMP 0x40 /* receive buffer is empty */ |
| |
| #define F_SKP_PKT 0x05 /* drop packet in buffer */ |
| |
| /* default bitmaps */ |
| #define D_TX_INTR ( ENA_TMT_OK ) |
| #define D_RX_INTR ( ENA_PKT_RDY | ENA_LEN_ERR \ |
| | ENA_ALG_ERR | ENA_CRC_ERR | ENA_OVR_FLO ) |
| #define TX_STAT_M ( F_TMT_RDY ) |
| #define RX_STAT_M ( F_PKT_RDY | F_LEN_ERR \ |
| | F_ALG_ERR | F_CRC_ERR | F_OVR_FLO ) |
| |
| /* commands */ |
| #define D_TX_MODE 0x06 /* no tests, detect carrier */ |
| #define ID_MATCHED 0x02 /* (RX_MODE) */ |
| #define RECV_ALL 0x03 /* (RX_MODE) */ |
| #define CONFIG0_DFL 0x5a /* 16bit bus, 4K x 2 Tx queues */ |
| #define CONFIG0_DFL_1 0x5e /* 16bit bus, 8K x 2 Tx queues */ |
| #define CONFIG0_RST 0xda /* Data Link Controller off (CONFIG_0) */ |
| #define CONFIG0_RST_1 0xde /* Data Link Controller off (CONFIG_0) */ |
| #define BANK_0 0xa0 /* bank 0 (CONFIG_1) */ |
| #define BANK_1 0xa4 /* bank 1 (CONFIG_1) */ |
| #define BANK_2 0xa8 /* bank 2 (CONFIG_1) */ |
| #define CHIP_OFF 0x80 /* contrl chip power off (CONFIG_1) */ |
| #define DO_TX 0x80 /* do transmit packet */ |
| #define SEND_PKT 0x81 /* send a packet */ |
| #define AUTO_MODE 0x07 /* Auto skip packet on 16 col detected */ |
| #define MANU_MODE 0x03 /* Stop and skip packet on 16 col */ |
| #define TDK_AUTO_MODE 0x47 /* Auto skip packet on 16 col detected */ |
| #define TDK_MANU_MODE 0x43 /* Stop and skip packet on 16 col */ |
| #define INTR_OFF 0x0d /* LAN controller ignores interrupts */ |
| #define INTR_ON 0x1d /* LAN controller will catch interrupts */ |
| |
| #define TX_TIMEOUT ((400*HZ)/1000) |
| |
| #define BANK_0U 0x20 /* bank 0 (CONFIG_1) */ |
| #define BANK_1U 0x24 /* bank 1 (CONFIG_1) */ |
| #define BANK_2U 0x28 /* bank 2 (CONFIG_1) */ |
| |
| static const struct net_device_ops fjn_netdev_ops = { |
| .ndo_open = fjn_open, |
| .ndo_stop = fjn_close, |
| .ndo_start_xmit = fjn_start_xmit, |
| .ndo_tx_timeout = fjn_tx_timeout, |
| .ndo_set_config = fjn_config, |
| .ndo_set_multicast_list = set_rx_mode, |
| .ndo_change_mtu = eth_change_mtu, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| static int fmvj18x_probe(struct pcmcia_device *link) |
| { |
| local_info_t *lp; |
| struct net_device *dev; |
| |
| dev_dbg(&link->dev, "fmvj18x_attach()\n"); |
| |
| /* Make up a FMVJ18x specific data structure */ |
| dev = alloc_etherdev(sizeof(local_info_t)); |
| if (!dev) |
| return -ENOMEM; |
| lp = netdev_priv(dev); |
| link->priv = dev; |
| lp->p_dev = link; |
| lp->base = NULL; |
| |
| /* The io structure describes IO port mapping */ |
| link->resource[0]->end = 32; |
| link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; |
| |
| /* General socket configuration */ |
| link->conf.Attributes = CONF_ENABLE_IRQ; |
| link->conf.IntType = INT_MEMORY_AND_IO; |
| |
| dev->netdev_ops = &fjn_netdev_ops; |
| dev->watchdog_timeo = TX_TIMEOUT; |
| |
| SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); |
| |
| return fmvj18x_config(link); |
| } /* fmvj18x_attach */ |
| |
| /*====================================================================*/ |
| |
| static void fmvj18x_detach(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| |
| dev_dbg(&link->dev, "fmvj18x_detach\n"); |
| |
| unregister_netdev(dev); |
| |
| fmvj18x_release(link); |
| |
| free_netdev(dev); |
| } /* fmvj18x_detach */ |
| |
| /*====================================================================*/ |
| |
| static int mfc_try_io_port(struct pcmcia_device *link) |
| { |
| int i, ret; |
| static const unsigned int serial_base[5] = |
| { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; |
| |
| for (i = 0; i < 5; i++) { |
| link->resource[1]->start = serial_base[i]; |
| link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; |
| if (link->resource[1]->start == 0) { |
| link->resource[1]->end = 0; |
| pr_notice("out of resource for serial\n"); |
| } |
| ret = pcmcia_request_io(link); |
| if (ret == 0) |
| return ret; |
| } |
| return ret; |
| } |
| |
| static int ungermann_try_io_port(struct pcmcia_device *link) |
| { |
| int ret; |
| unsigned int ioaddr; |
| /* |
| Ungermann-Bass Access/CARD accepts 0x300,0x320,0x340,0x360 |
| 0x380,0x3c0 only for ioport. |
| */ |
| for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) { |
| link->resource[0]->start = ioaddr; |
| ret = pcmcia_request_io(link); |
| if (ret == 0) { |
| /* calculate ConfigIndex value */ |
| link->conf.ConfigIndex = |
| ((link->resource[0]->start & 0x0f0) >> 3) | 0x22; |
| return ret; |
| } |
| } |
| return ret; /* RequestIO failed */ |
| } |
| |
| static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, |
| cistpl_cftable_entry_t *cfg, |
| cistpl_cftable_entry_t *dflt, |
| unsigned int vcc, |
| void *priv_data) |
| { |
| return 0; /* strange, but that's what the code did already before... */ |
| } |
| |
| static int fmvj18x_config(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| local_info_t *lp = netdev_priv(dev); |
| int i, ret; |
| unsigned int ioaddr; |
| cardtype_t cardtype; |
| char *card_name = "unknown"; |
| u8 *buf; |
| size_t len; |
| u_char buggybuf[32]; |
| |
| dev_dbg(&link->dev, "fmvj18x_config\n"); |
| |
| link->io_lines = 5; |
| |
| len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf); |
| kfree(buf); |
| |
| if (len) { |
| /* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */ |
| ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL); |
| if (ret != 0) |
| goto failed; |
| |
| switch (link->manf_id) { |
| case MANFID_TDK: |
| cardtype = TDK; |
| if (link->card_id == PRODID_TDK_GN3410 || |
| link->card_id == PRODID_TDK_NP9610 || |
| link->card_id == PRODID_TDK_MN3200) { |
| /* MultiFunction Card */ |
| link->conf.ConfigBase = 0x800; |
| link->conf.ConfigIndex = 0x47; |
| link->resource[1]->end = 8; |
| } |
| break; |
| case MANFID_NEC: |
| cardtype = NEC; /* MultiFunction Card */ |
| link->conf.ConfigBase = 0x800; |
| link->conf.ConfigIndex = 0x47; |
| link->resource[1]->end = 8; |
| break; |
| case MANFID_KME: |
| cardtype = KME; /* MultiFunction Card */ |
| link->conf.ConfigBase = 0x800; |
| link->conf.ConfigIndex = 0x47; |
| link->resource[1]->end = 8; |
| break; |
| case MANFID_CONTEC: |
| cardtype = CONTEC; |
| break; |
| case MANFID_FUJITSU: |
| if (link->conf.ConfigBase == 0x0fe0) |
| cardtype = MBH10302; |
| else if (link->card_id == PRODID_FUJITSU_MBH10302) |
| /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302), |
| but these are MBH10304 based card. */ |
| cardtype = MBH10304; |
| else if (link->card_id == PRODID_FUJITSU_MBH10304) |
| cardtype = MBH10304; |
| else |
| cardtype = LA501; |
| break; |
| default: |
| cardtype = MBH10304; |
| } |
| } else { |
| /* old type card */ |
| switch (link->manf_id) { |
| case MANFID_FUJITSU: |
| if (link->card_id == PRODID_FUJITSU_MBH10304) { |
| cardtype = XXX10304; /* MBH10304 with buggy CIS */ |
| link->conf.ConfigIndex = 0x20; |
| } else { |
| cardtype = MBH10302; /* NextCom NC5310, etc. */ |
| link->conf.ConfigIndex = 1; |
| } |
| break; |
| case MANFID_UNGERMANN: |
| cardtype = UNGERMANN; |
| break; |
| default: |
| cardtype = MBH10302; |
| link->conf.ConfigIndex = 1; |
| } |
| } |
| |
| if (link->resource[1]->end != 0) { |
| ret = mfc_try_io_port(link); |
| if (ret != 0) goto failed; |
| } else if (cardtype == UNGERMANN) { |
| ret = ungermann_try_io_port(link); |
| if (ret != 0) goto failed; |
| } else { |
| ret = pcmcia_request_io(link); |
| if (ret) |
| goto failed; |
| } |
| ret = pcmcia_request_irq(link, fjn_interrupt); |
| if (ret) |
| goto failed; |
| ret = pcmcia_request_configuration(link, &link->conf); |
| if (ret) |
| goto failed; |
| |
| dev->irq = link->irq; |
| dev->base_addr = link->resource[0]->start; |
| |
| if (resource_size(link->resource[1]) != 0) { |
| ret = fmvj18x_setup_mfc(link); |
| if (ret != 0) goto failed; |
| } |
| |
| ioaddr = dev->base_addr; |
| |
| /* Reset controller */ |
| if (sram_config == 0) |
| outb(CONFIG0_RST, ioaddr + CONFIG_0); |
| else |
| outb(CONFIG0_RST_1, ioaddr + CONFIG_0); |
| |
| /* Power On chip and select bank 0 */ |
| if (cardtype == MBH10302) |
| outb(BANK_0, ioaddr + CONFIG_1); |
| else |
| outb(BANK_0U, ioaddr + CONFIG_1); |
| |
| /* Set hardware address */ |
| switch (cardtype) { |
| case MBH10304: |
| case TDK: |
| case LA501: |
| case CONTEC: |
| case NEC: |
| case KME: |
| if (cardtype == MBH10304) { |
| card_name = "FMV-J182"; |
| |
| len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf); |
| if (len < 11) { |
| kfree(buf); |
| goto failed; |
| } |
| /* Read MACID from CIS */ |
| for (i = 5; i < 11; i++) |
| dev->dev_addr[i] = buf[i]; |
| kfree(buf); |
| } else { |
| if (pcmcia_get_mac_from_cis(link, dev)) |
| goto failed; |
| if( cardtype == TDK ) { |
| card_name = "TDK LAK-CD021"; |
| } else if( cardtype == LA501 ) { |
| card_name = "LA501"; |
| } else if( cardtype == NEC ) { |
| card_name = "PK-UG-J001"; |
| } else if( cardtype == KME ) { |
| card_name = "Panasonic"; |
| } else { |
| card_name = "C-NET(PC)C"; |
| } |
| } |
| break; |
| case UNGERMANN: |
| /* Read MACID from register */ |
| for (i = 0; i < 6; i++) |
| dev->dev_addr[i] = inb(ioaddr + UNGERMANN_MAC_ID + i); |
| card_name = "Access/CARD"; |
| break; |
| case XXX10304: |
| /* Read MACID from Buggy CIS */ |
| if (fmvj18x_get_hwinfo(link, buggybuf) == -1) { |
| pr_notice("unable to read hardware net address\n"); |
| goto failed; |
| } |
| for (i = 0 ; i < 6; i++) { |
| dev->dev_addr[i] = buggybuf[i]; |
| } |
| card_name = "FMV-J182"; |
| break; |
| case MBH10302: |
| default: |
| /* Read MACID from register */ |
| for (i = 0; i < 6; i++) |
| dev->dev_addr[i] = inb(ioaddr + MAC_ID + i); |
| card_name = "FMV-J181"; |
| break; |
| } |
| |
| lp->cardtype = cardtype; |
| SET_NETDEV_DEV(dev, &link->dev); |
| |
| if (register_netdev(dev) != 0) { |
| pr_notice("register_netdev() failed\n"); |
| goto failed; |
| } |
| |
| /* print current configuration */ |
| netdev_info(dev, "%s, sram %s, port %#3lx, irq %d, hw_addr %pM\n", |
| card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2", |
| dev->base_addr, dev->irq, dev->dev_addr); |
| |
| return 0; |
| |
| failed: |
| fmvj18x_release(link); |
| return -ENODEV; |
| } /* fmvj18x_config */ |
| /*====================================================================*/ |
| |
| static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) |
| { |
| win_req_t req; |
| u_char __iomem *base; |
| int i, j; |
| |
| /* Allocate a small memory window */ |
| req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; |
| req.Base = 0; req.Size = 0; |
| req.AccessSpeed = 0; |
| i = pcmcia_request_window(link, &req, &link->win); |
| if (i != 0) |
| return -1; |
| |
| base = ioremap(req.Base, req.Size); |
| pcmcia_map_mem_page(link, link->win, 0); |
| |
| /* |
| * MBH10304 CISTPL_FUNCE_LAN_NODE_ID format |
| * 22 0d xx xx xx 04 06 yy yy yy yy yy yy ff |
| * 'xx' is garbage. |
| * 'yy' is MAC address. |
| */ |
| for (i = 0; i < 0x200; i++) { |
| if (readb(base+i*2) == 0x22) { |
| if (readb(base+(i-1)*2) == 0xff && |
| readb(base+(i+5)*2) == 0x04 && |
| readb(base+(i+6)*2) == 0x06 && |
| readb(base+(i+13)*2) == 0xff) |
| break; |
| } |
| } |
| |
| if (i != 0x200) { |
| for (j = 0 ; j < 6; j++,i++) { |
| node_id[j] = readb(base+(i+7)*2); |
| } |
| } |
| |
| iounmap(base); |
| j = pcmcia_release_window(link, link->win); |
| return (i != 0x200) ? 0 : -1; |
| |
| } /* fmvj18x_get_hwinfo */ |
| /*====================================================================*/ |
| |
| static int fmvj18x_setup_mfc(struct pcmcia_device *link) |
| { |
| win_req_t req; |
| int i; |
| struct net_device *dev = link->priv; |
| unsigned int ioaddr; |
| local_info_t *lp = netdev_priv(dev); |
| |
| /* Allocate a small memory window */ |
| req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; |
| req.Base = 0; req.Size = 0; |
| req.AccessSpeed = 0; |
| i = pcmcia_request_window(link, &req, &link->win); |
| if (i != 0) |
| return -1; |
| |
| lp->base = ioremap(req.Base, req.Size); |
| if (lp->base == NULL) { |
| netdev_notice(dev, "ioremap failed\n"); |
| return -1; |
| } |
| |
| i = pcmcia_map_mem_page(link, link->win, 0); |
| if (i != 0) { |
| iounmap(lp->base); |
| lp->base = NULL; |
| return -1; |
| } |
| |
| ioaddr = dev->base_addr; |
| writeb(0x47, lp->base+0x800); /* Config Option Register of LAN */ |
| writeb(0x0, lp->base+0x802); /* Config and Status Register */ |
| |
| writeb(ioaddr & 0xff, lp->base+0x80a); /* I/O Base(Low) of LAN */ |
| writeb((ioaddr >> 8) & 0xff, lp->base+0x80c); /* I/O Base(High) of LAN */ |
| |
| writeb(0x45, lp->base+0x820); /* Config Option Register of Modem */ |
| writeb(0x8, lp->base+0x822); /* Config and Status Register */ |
| |
| return 0; |
| |
| } |
| /*====================================================================*/ |
| |
| static void fmvj18x_release(struct pcmcia_device *link) |
| { |
| |
| struct net_device *dev = link->priv; |
| local_info_t *lp = netdev_priv(dev); |
| u_char __iomem *tmp; |
| int j; |
| |
| dev_dbg(&link->dev, "fmvj18x_release\n"); |
| |
| if (lp->base != NULL) { |
| tmp = lp->base; |
| lp->base = NULL; /* set NULL before iounmap */ |
| iounmap(tmp); |
| j = pcmcia_release_window(link, link->win); |
| } |
| |
| pcmcia_disable_device(link); |
| |
| } |
| |
| static int fmvj18x_suspend(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| |
| if (link->open) |
| netif_device_detach(dev); |
| |
| return 0; |
| } |
| |
| static int fmvj18x_resume(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| |
| if (link->open) { |
| fjn_reset(dev); |
| netif_device_attach(dev); |
| } |
| |
| return 0; |
| } |
| |
| /*====================================================================*/ |
| |
| static struct pcmcia_device_id fmvj18x_ids[] = { |
| PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004), |
| PCMCIA_DEVICE_PROD_ID12("EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04", 0x528c88c4, 0x74f91e59), |
| PCMCIA_DEVICE_PROD_ID12("Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT", 0x53af556e, 0x877f9922), |
| PCMCIA_DEVICE_PROD_ID12("Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT", 0xf47e6c66, 0x877f9922), |
| PCMCIA_DEVICE_PROD_ID12("FUJITSU", "LAN Card(FMV-J182)", 0x6ee5a3d8, 0x5baf31db), |
| PCMCIA_DEVICE_PROD_ID12("FUJITSU", "MBH10308", 0x6ee5a3d8, 0x3f04875e), |
| PCMCIA_DEVICE_PROD_ID12("FUJITSU TOWA", "LA501", 0xb8451188, 0x12939ba2), |
| PCMCIA_DEVICE_PROD_ID12("HITACHI", "HT-4840-11", 0xf4f43949, 0x773910f4), |
| PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310B Ver1.0 ", 0x8cef4d3a, 0x075fc7b6), |
| PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310 Ver1.0 ", 0x8cef4d3a, 0xbccf43e6), |
| PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "10BASE_T CARD R280", 0x85c10e17, 0xd9413666), |
| PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CD02x", 0x1eae9475, 0x8fa0ee70), |
| PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CF010", 0x1eae9475, 0x7683bc9a), |
| PCMCIA_DEVICE_PROD_ID1("CONTEC Co.,Ltd.", 0x58d8fee2), |
| PCMCIA_DEVICE_PROD_ID1("PCMCIA LAN MBH10304 ES", 0x2599f454), |
| PCMCIA_DEVICE_PROD_ID1("PCMCIA MBH10302", 0x8f4005da), |
| PCMCIA_DEVICE_PROD_ID1("UBKK,V2.0", 0x90888080), |
| PCMCIA_PFC_DEVICE_PROD_ID12(0, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), |
| PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064), |
| PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a), |
| PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a), |
| PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01), |
| PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05), |
| PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101), |
| PCMCIA_DEVICE_NULL, |
| }; |
| MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids); |
| |
| static struct pcmcia_driver fmvj18x_cs_driver = { |
| .owner = THIS_MODULE, |
| .drv = { |
| .name = "fmvj18x_cs", |
| }, |
| .probe = fmvj18x_probe, |
| .remove = fmvj18x_detach, |
| .id_table = fmvj18x_ids, |
| .suspend = fmvj18x_suspend, |
| .resume = fmvj18x_resume, |
| }; |
| |
| static int __init init_fmvj18x_cs(void) |
| { |
| return pcmcia_register_driver(&fmvj18x_cs_driver); |
| } |
| |
| static void __exit exit_fmvj18x_cs(void) |
| { |
| pcmcia_unregister_driver(&fmvj18x_cs_driver); |
| } |
| |
| module_init(init_fmvj18x_cs); |
| module_exit(exit_fmvj18x_cs); |
| |
| /*====================================================================*/ |
| |
| static irqreturn_t fjn_interrupt(int dummy, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| local_info_t *lp = netdev_priv(dev); |
| unsigned int ioaddr; |
| unsigned short tx_stat, rx_stat; |
| |
| ioaddr = dev->base_addr; |
| |
| /* avoid multiple interrupts */ |
| outw(0x0000, ioaddr + TX_INTR); |
| |
| /* wait for a while */ |
| udelay(1); |
| |
| /* get status */ |
| tx_stat = inb(ioaddr + TX_STATUS); |
| rx_stat = inb(ioaddr + RX_STATUS); |
| |
| /* clear status */ |
| outb(tx_stat, ioaddr + TX_STATUS); |
| outb(rx_stat, ioaddr + RX_STATUS); |
| |
| pr_debug("%s: interrupt, rx_status %02x.\n", dev->name, rx_stat); |
| pr_debug(" tx_status %02x.\n", tx_stat); |
| |
| if (rx_stat || (inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) { |
| /* there is packet(s) in rx buffer */ |
| fjn_rx(dev); |
| } |
| if (tx_stat & F_TMT_RDY) { |
| dev->stats.tx_packets += lp->sent ; |
| lp->sent = 0 ; |
| if (lp->tx_queue) { |
| outb(DO_TX | lp->tx_queue, ioaddr + TX_START); |
| lp->sent = lp->tx_queue ; |
| lp->tx_queue = 0; |
| lp->tx_queue_len = 0; |
| dev->trans_start = jiffies; |
| } else { |
| lp->tx_started = 0; |
| } |
| netif_wake_queue(dev); |
| } |
| pr_debug("%s: exiting interrupt,\n", dev->name); |
| pr_debug(" tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat); |
| |
| outb(D_TX_INTR, ioaddr + TX_INTR); |
| outb(D_RX_INTR, ioaddr + RX_INTR); |
| |
| if (lp->base != NULL) { |
| /* Ack interrupt for multifunction card */ |
| writeb(0x01, lp->base+0x802); |
| writeb(0x09, lp->base+0x822); |
| } |
| |
| return IRQ_HANDLED; |
| |
| } /* fjn_interrupt */ |
| |
| /*====================================================================*/ |
| |
| static void fjn_tx_timeout(struct net_device *dev) |
| { |
| struct local_info_t *lp = netdev_priv(dev); |
| unsigned int ioaddr = dev->base_addr; |
| |
| netdev_notice(dev, "transmit timed out with status %04x, %s?\n", |
| htons(inw(ioaddr + TX_STATUS)), |
| inb(ioaddr + TX_STATUS) & F_TMT_RDY |
| ? "IRQ conflict" : "network cable problem"); |
| netdev_notice(dev, "timeout registers: %04x %04x %04x " |
| "%04x %04x %04x %04x %04x.\n", |
| htons(inw(ioaddr + 0)), htons(inw(ioaddr + 2)), |
| htons(inw(ioaddr + 4)), htons(inw(ioaddr + 6)), |
| htons(inw(ioaddr + 8)), htons(inw(ioaddr + 10)), |
| htons(inw(ioaddr + 12)), htons(inw(ioaddr + 14))); |
| dev->stats.tx_errors++; |
| /* ToDo: We should try to restart the adaptor... */ |
| local_irq_disable(); |
| fjn_reset(dev); |
| |
| lp->tx_started = 0; |
| lp->tx_queue = 0; |
| lp->tx_queue_len = 0; |
| lp->sent = 0; |
| lp->open_time = jiffies; |
| local_irq_enable(); |
| netif_wake_queue(dev); |
| } |
| |
| static netdev_tx_t fjn_start_xmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct local_info_t *lp = netdev_priv(dev); |
| unsigned int ioaddr = dev->base_addr; |
| short length = skb->len; |
| |
| if (length < ETH_ZLEN) |
| { |
| if (skb_padto(skb, ETH_ZLEN)) |
| return NETDEV_TX_OK; |
| length = ETH_ZLEN; |
| } |
| |
| netif_stop_queue(dev); |
| |
| { |
| unsigned char *buf = skb->data; |
| |
| if (length > ETH_FRAME_LEN) { |
| netdev_notice(dev, "Attempting to send a large packet (%d bytes)\n", |
| length); |
| return NETDEV_TX_BUSY; |
| } |
| |
| netdev_dbg(dev, "Transmitting a packet of length %lu\n", |
| (unsigned long)skb->len); |
| dev->stats.tx_bytes += skb->len; |
| |
| /* Disable both interrupts. */ |
| outw(0x0000, ioaddr + TX_INTR); |
| |
| /* wait for a while */ |
| udelay(1); |
| |
| outw(length, ioaddr + DATAPORT); |
| outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1); |
| |
| lp->tx_queue++; |
| lp->tx_queue_len += ((length+3) & ~1); |
| |
| if (lp->tx_started == 0) { |
| /* If the Tx is idle, always trigger a transmit. */ |
| outb(DO_TX | lp->tx_queue, ioaddr + TX_START); |
| lp->sent = lp->tx_queue ; |
| lp->tx_queue = 0; |
| lp->tx_queue_len = 0; |
| lp->tx_started = 1; |
| netif_start_queue(dev); |
| } else { |
| if( sram_config == 0 ) { |
| if (lp->tx_queue_len < (4096 - (ETH_FRAME_LEN +2)) ) |
| /* Yes, there is room for one more packet. */ |
| netif_start_queue(dev); |
| } else { |
| if (lp->tx_queue_len < (8192 - (ETH_FRAME_LEN +2)) && |
| lp->tx_queue < 127 ) |
| /* Yes, there is room for one more packet. */ |
| netif_start_queue(dev); |
| } |
| } |
| |
| /* Re-enable interrupts */ |
| outb(D_TX_INTR, ioaddr + TX_INTR); |
| outb(D_RX_INTR, ioaddr + RX_INTR); |
| } |
| dev_kfree_skb (skb); |
| |
| return NETDEV_TX_OK; |
| } /* fjn_start_xmit */ |
| |
| /*====================================================================*/ |
| |
| static void fjn_reset(struct net_device *dev) |
| { |
| struct local_info_t *lp = netdev_priv(dev); |
| unsigned int ioaddr = dev->base_addr; |
| int i; |
| |
| netdev_dbg(dev, "fjn_reset() called\n"); |
| |
| /* Reset controller */ |
| if( sram_config == 0 ) |
| outb(CONFIG0_RST, ioaddr + CONFIG_0); |
| else |
| outb(CONFIG0_RST_1, ioaddr + CONFIG_0); |
| |
| /* Power On chip and select bank 0 */ |
| if (lp->cardtype == MBH10302) |
| outb(BANK_0, ioaddr + CONFIG_1); |
| else |
| outb(BANK_0U, ioaddr + CONFIG_1); |
| |
| /* Set Tx modes */ |
| outb(D_TX_MODE, ioaddr + TX_MODE); |
| /* set Rx modes */ |
| outb(ID_MATCHED, ioaddr + RX_MODE); |
| |
| /* Set hardware address */ |
| for (i = 0; i < 6; i++) |
| outb(dev->dev_addr[i], ioaddr + NODE_ID + i); |
| |
| /* (re)initialize the multicast table */ |
| set_rx_mode(dev); |
| |
| /* Switch to bank 2 (runtime mode) */ |
| if (lp->cardtype == MBH10302) |
| outb(BANK_2, ioaddr + CONFIG_1); |
| else |
| outb(BANK_2U, ioaddr + CONFIG_1); |
| |
| /* set 16col ctrl bits */ |
| if( lp->cardtype == TDK || lp->cardtype == CONTEC) |
| outb(TDK_AUTO_MODE, ioaddr + COL_CTRL); |
| else |
| outb(AUTO_MODE, ioaddr + COL_CTRL); |
| |
| /* clear Reserved Regs */ |
| outb(0x00, ioaddr + BMPR12); |
| outb(0x00, ioaddr + BMPR13); |
| |
| /* reset Skip packet reg. */ |
| outb(0x01, ioaddr + RX_SKIP); |
| |
| /* Enable Tx and Rx */ |
| if( sram_config == 0 ) |
| outb(CONFIG0_DFL, ioaddr + CONFIG_0); |
| else |
| outb(CONFIG0_DFL_1, ioaddr + CONFIG_0); |
| |
| /* Init receive pointer ? */ |
| inw(ioaddr + DATAPORT); |
| inw(ioaddr + DATAPORT); |
| |
| /* Clear all status */ |
| outb(0xff, ioaddr + TX_STATUS); |
| outb(0xff, ioaddr + RX_STATUS); |
| |
| if (lp->cardtype == MBH10302) |
| outb(INTR_OFF, ioaddr + LAN_CTRL); |
| |
| /* Turn on Rx interrupts */ |
| outb(D_TX_INTR, ioaddr + TX_INTR); |
| outb(D_RX_INTR, ioaddr + RX_INTR); |
| |
| /* Turn on interrupts from LAN card controller */ |
| if (lp->cardtype == MBH10302) |
| outb(INTR_ON, ioaddr + LAN_CTRL); |
| } /* fjn_reset */ |
| |
| /*====================================================================*/ |
| |
| static void fjn_rx(struct net_device *dev) |
| { |
| unsigned int ioaddr = dev->base_addr; |
| int boguscount = 10; /* 5 -> 10: by agy 19940922 */ |
| |
| pr_debug("%s: in rx_packet(), rx_status %02x.\n", |
| dev->name, inb(ioaddr + RX_STATUS)); |
| |
| while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) { |
| u_short status = inw(ioaddr + DATAPORT); |
| |
| netdev_dbg(dev, "Rxing packet mode %02x status %04x.\n", |
| inb(ioaddr + RX_MODE), status); |
| #ifndef final_version |
| if (status == 0) { |
| outb(F_SKP_PKT, ioaddr + RX_SKIP); |
| break; |
| } |
| #endif |
| if ((status & 0xF0) != 0x20) { /* There was an error. */ |
| dev->stats.rx_errors++; |
| if (status & F_LEN_ERR) dev->stats.rx_length_errors++; |
| if (status & F_ALG_ERR) dev->stats.rx_frame_errors++; |
| if (status & F_CRC_ERR) dev->stats.rx_crc_errors++; |
| if (status & F_OVR_FLO) dev->stats.rx_over_errors++; |
| } else { |
| u_short pkt_len = inw(ioaddr + DATAPORT); |
| /* Malloc up new buffer. */ |
| struct sk_buff *skb; |
| |
| if (pkt_len > 1550) { |
| netdev_notice(dev, "The FMV-18x claimed a very large packet, size %d\n", |
| pkt_len); |
| outb(F_SKP_PKT, ioaddr + RX_SKIP); |
| dev->stats.rx_errors++; |
| break; |
| } |
| skb = dev_alloc_skb(pkt_len+2); |
| if (skb == NULL) { |
| netdev_notice(dev, "Memory squeeze, dropping packet (len %d)\n", |
| pkt_len); |
| outb(F_SKP_PKT, ioaddr + RX_SKIP); |
| dev->stats.rx_dropped++; |
| break; |
| } |
| |
| skb_reserve(skb, 2); |
| insw(ioaddr + DATAPORT, skb_put(skb, pkt_len), |
| (pkt_len + 1) >> 1); |
| skb->protocol = eth_type_trans(skb, dev); |
| |
| { |
| int i; |
| pr_debug("%s: Rxed packet of length %d: ", |
| dev->name, pkt_len); |
| for (i = 0; i < 14; i++) |
| pr_debug(" %02x", skb->data[i]); |
| pr_debug(".\n"); |
| } |
| |
| netif_rx(skb); |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += pkt_len; |
| } |
| if (--boguscount <= 0) |
| break; |
| } |
| |
| /* If any worth-while packets have been received, dev_rint() |
| has done a netif_wake_queue() for us and will work on them |
| when we get to the bottom-half routine. */ |
| /* |
| if (lp->cardtype != TDK) { |
| int i; |
| for (i = 0; i < 20; i++) { |
| if ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == F_BUF_EMP) |
| break; |
| (void)inw(ioaddr + DATAPORT); /+ dummy status read +/ |
| outb(F_SKP_PKT, ioaddr + RX_SKIP); |
| } |
| |
| if (i > 0) |
| pr_debug("%s: Exint Rx packet with mode %02x after " |
| "%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i); |
| } |
| */ |
| } /* fjn_rx */ |
| |
| /*====================================================================*/ |
| |
| static void netdev_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| strcpy(info->driver, DRV_NAME); |
| strcpy(info->version, DRV_VERSION); |
| sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr); |
| } |
| |
| static const struct ethtool_ops netdev_ethtool_ops = { |
| .get_drvinfo = netdev_get_drvinfo, |
| }; |
| |
| static int fjn_config(struct net_device *dev, struct ifmap *map){ |
| return 0; |
| } |
| |
| static int fjn_open(struct net_device *dev) |
| { |
| struct local_info_t *lp = netdev_priv(dev); |
| struct pcmcia_device *link = lp->p_dev; |
| |
| pr_debug("fjn_open('%s').\n", dev->name); |
| |
| if (!pcmcia_dev_present(link)) |
| return -ENODEV; |
| |
| link->open++; |
| |
| fjn_reset(dev); |
| |
| lp->tx_started = 0; |
| lp->tx_queue = 0; |
| lp->tx_queue_len = 0; |
| lp->open_time = jiffies; |
| netif_start_queue(dev); |
| |
| return 0; |
| } /* fjn_open */ |
| |
| /*====================================================================*/ |
| |
| static int fjn_close(struct net_device *dev) |
| { |
| struct local_info_t *lp = netdev_priv(dev); |
| struct pcmcia_device *link = lp->p_dev; |
| unsigned int ioaddr = dev->base_addr; |
| |
| pr_debug("fjn_close('%s').\n", dev->name); |
| |
| lp->open_time = 0; |
| netif_stop_queue(dev); |
| |
| /* Set configuration register 0 to disable Tx and Rx. */ |
| if( sram_config == 0 ) |
| outb(CONFIG0_RST ,ioaddr + CONFIG_0); |
| else |
| outb(CONFIG0_RST_1 ,ioaddr + CONFIG_0); |
| |
| /* Update the statistics -- ToDo. */ |
| |
| /* Power-down the chip. Green, green, green! */ |
| outb(CHIP_OFF ,ioaddr + CONFIG_1); |
| |
| /* Set the ethernet adaptor disable IRQ */ |
| if (lp->cardtype == MBH10302) |
| outb(INTR_OFF, ioaddr + LAN_CTRL); |
| |
| link->open--; |
| |
| return 0; |
| } /* fjn_close */ |
| |
| /*====================================================================*/ |
| |
| /* |
| Set the multicast/promiscuous mode for this adaptor. |
| */ |
| |
| static void set_rx_mode(struct net_device *dev) |
| { |
| unsigned int ioaddr = dev->base_addr; |
| u_char mc_filter[8]; /* Multicast hash filter */ |
| u_long flags; |
| int i; |
| |
| int saved_bank; |
| int saved_config_0 = inb(ioaddr + CONFIG_0); |
| |
| local_irq_save(flags); |
| |
| /* Disable Tx and Rx */ |
| if (sram_config == 0) |
| outb(CONFIG0_RST, ioaddr + CONFIG_0); |
| else |
| outb(CONFIG0_RST_1, ioaddr + CONFIG_0); |
| |
| if (dev->flags & IFF_PROMISC) { |
| memset(mc_filter, 0xff, sizeof(mc_filter)); |
| outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */ |
| } else if (netdev_mc_count(dev) > MC_FILTERBREAK || |
| (dev->flags & IFF_ALLMULTI)) { |
| /* Too many to filter perfectly -- accept all multicasts. */ |
| memset(mc_filter, 0xff, sizeof(mc_filter)); |
| outb(2, ioaddr + RX_MODE); /* Use normal mode. */ |
| } else if (netdev_mc_empty(dev)) { |
| memset(mc_filter, 0x00, sizeof(mc_filter)); |
| outb(1, ioaddr + RX_MODE); /* Ignore almost all multicasts. */ |
| } else { |
| struct netdev_hw_addr *ha; |
| |
| memset(mc_filter, 0, sizeof(mc_filter)); |
| netdev_for_each_mc_addr(ha, dev) { |
| unsigned int bit = ether_crc_le(ETH_ALEN, ha->addr) >> 26; |
| mc_filter[bit >> 3] |= (1 << (bit & 7)); |
| } |
| outb(2, ioaddr + RX_MODE); /* Use normal mode. */ |
| } |
| |
| /* Switch to bank 1 and set the multicast table. */ |
| saved_bank = inb(ioaddr + CONFIG_1); |
| outb(0xe4, ioaddr + CONFIG_1); |
| |
| for (i = 0; i < 8; i++) |
| outb(mc_filter[i], ioaddr + MAR_ADR + i); |
| outb(saved_bank, ioaddr + CONFIG_1); |
| |
| outb(saved_config_0, ioaddr + CONFIG_0); |
| |
| local_irq_restore(flags); |
| } |