s390/kernel: lazy restore fpu registers
Improve the save and restore behavior of FPU register contents to use the
vector extension within the kernel.
The kernel does not use floating-point or vector registers and, therefore,
saving and restoring the FPU register contents are performed for handling
signals or switching processes only. To prepare for using vector
instructions and vector registers within the kernel, enhance the save
behavior and implement a lazy restore at return to user space from a
system call or interrupt.
To implement the lazy restore, the save_fpu_regs() sets a CPU information
flag, CIF_FPU, to indicate that the FPU registers must be restored.
Saving and setting CIF_FPU is performed in an atomic fashion to be
interrupt-safe. When the kernel wants to use the vector extension or
wants to change the FPU register state for a task during signal handling,
the save_fpu_regs() must be called first. The CIF_FPU flag is also set at
process switch. At return to user space, the FPU state is restored. In
particular, the FPU state includes the floating-point or vector register
contents, as well as, vector-enablement and floating-point control. The
FPU state restore and clearing CIF_FPU is also performed in an atomic
fashion.
For KVM, the restore of the FPU register state is performed when restoring
the general-purpose guest registers before the SIE instructions is started.
Because the path towards the SIE instruction is interruptible, the CIF_FPU
flag must be checked again right before going into SIE. If set, the guest
registers must be reloaded again by re-entering the outer SIE loop. This
is the same behavior as if the SIE critical section is interrupted.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index fc7bc71..c0cceaf 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -1198,27 +1198,54 @@
return 0;
}
+/*
+ * Backs up the current FP/VX register save area on a particular
+ * destination. Used to switch between different register save
+ * areas.
+ */
+static inline void save_fpu_to(struct fpu *dst)
+{
+ dst->fpc = current->thread.fpu.fpc;
+ dst->flags = current->thread.fpu.flags;
+ dst->regs = current->thread.fpu.regs;
+}
+
+/*
+ * Switches the FP/VX register save area from which to lazy
+ * restore register contents.
+ */
+static inline void load_fpu_from(struct fpu *from)
+{
+ current->thread.fpu.fpc = from->fpc;
+ current->thread.fpu.flags = from->flags;
+ current->thread.fpu.regs = from->regs;
+}
+
void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
{
- __u32 fpc;
+ /* Save host register state */
+ save_fpu_regs(¤t->thread.fpu);
+ save_fpu_to(&vcpu->arch.host_fpregs);
- save_fp_ctl(&vcpu->arch.host_fpregs.fpc);
- if (test_kvm_facility(vcpu->kvm, 129))
- save_vx_regs((__vector128 *)&vcpu->arch.host_vregs->vrs);
- else
- save_fp_regs(vcpu->arch.host_fpregs.fprs);
- save_access_regs(vcpu->arch.host_acrs);
if (test_kvm_facility(vcpu->kvm, 129)) {
- fpc = vcpu->run->s.regs.fpc;
- restore_vx_regs((__vector128 *)&vcpu->run->s.regs.vrs);
- } else {
- fpc = vcpu->arch.guest_fpregs.fpc;
- restore_fp_regs(vcpu->arch.guest_fpregs.fprs);
- }
- if (test_fp_ctl(fpc))
+ current->thread.fpu.fpc = vcpu->run->s.regs.fpc;
+ current->thread.fpu.flags = FPU_USE_VX;
+ /*
+ * Use the register save area in the SIE-control block
+ * for register restore and save in kvm_arch_vcpu_put()
+ */
+ current->thread.fpu.vxrs =
+ (__vector128 *)&vcpu->run->s.regs.vrs;
+ /* Always enable the vector extension for KVM */
+ __ctl_set_vx();
+ } else
+ load_fpu_from(&vcpu->arch.guest_fpregs);
+
+ if (test_fp_ctl(current->thread.fpu.fpc))
/* User space provided an invalid FPC, let's clear it */
- fpc = 0;
- restore_fp_ctl(&fpc);
+ current->thread.fpu.fpc = 0;
+
+ save_access_regs(vcpu->arch.host_acrs);
restore_access_regs(vcpu->run->s.regs.acrs);
gmap_enable(vcpu->arch.gmap);
atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
@@ -1228,19 +1255,22 @@
{
atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
gmap_disable(vcpu->arch.gmap);
- if (test_kvm_facility(vcpu->kvm, 129)) {
- save_fp_ctl(&vcpu->run->s.regs.fpc);
- save_vx_regs((__vector128 *)&vcpu->run->s.regs.vrs);
- } else {
- save_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
- save_fp_regs(vcpu->arch.guest_fpregs.fprs);
- }
- save_access_regs(vcpu->run->s.regs.acrs);
- restore_fp_ctl(&vcpu->arch.host_fpregs.fpc);
+
+ save_fpu_regs(¤t->thread.fpu);
+
if (test_kvm_facility(vcpu->kvm, 129))
- restore_vx_regs((__vector128 *)&vcpu->arch.host_vregs->vrs);
+ /*
+ * kvm_arch_vcpu_load() set up the register save area to
+ * the &vcpu->run->s.regs.vrs and, thus, the vector registers
+ * are already saved. Only the floating-point control must be
+ * copied.
+ */
+ vcpu->run->s.regs.fpc = current->thread.fpu.fpc;
else
- restore_fp_regs(vcpu->arch.host_fpregs.fprs);
+ save_fpu_to(&vcpu->arch.guest_fpregs);
+ load_fpu_from(&vcpu->arch.host_fpregs);
+
+ save_access_regs(vcpu->run->s.regs.acrs);
restore_access_regs(vcpu->arch.host_acrs);
}
@@ -1383,7 +1413,6 @@
vcpu->arch.sie_block = &sie_page->sie_block;
vcpu->arch.sie_block->itdba = (unsigned long) &sie_page->itdb;
- vcpu->arch.host_vregs = &sie_page->vregs;
vcpu->arch.sie_block->icpua = id;
if (!kvm_is_ucontrol(kvm)) {
@@ -1405,6 +1434,19 @@
vcpu->arch.local_int.wq = &vcpu->wq;
vcpu->arch.local_int.cpuflags = &vcpu->arch.sie_block->cpuflags;
+ /*
+ * Allocate a save area for floating-point registers. If the vector
+ * extension is available, register contents are saved in the SIE
+ * control block. The allocated save area is still required in
+ * particular places, for example, in kvm_s390_vcpu_store_status().
+ */
+ vcpu->arch.guest_fpregs.fprs = kzalloc(sizeof(freg_t) * __NUM_FPRS,
+ GFP_KERNEL);
+ if (!vcpu->arch.guest_fpregs.fprs) {
+ rc = -ENOMEM;
+ goto out_free_sie_block;
+ }
+
rc = kvm_vcpu_init(vcpu, kvm, id);
if (rc)
goto out_free_sie_block;
@@ -1627,16 +1669,16 @@
{
if (test_fp_ctl(fpu->fpc))
return -EINVAL;
- memcpy(&vcpu->arch.guest_fpregs.fprs, &fpu->fprs, sizeof(fpu->fprs));
+ memcpy(vcpu->arch.guest_fpregs.fprs, &fpu->fprs, sizeof(fpu->fprs));
vcpu->arch.guest_fpregs.fpc = fpu->fpc;
- restore_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
- restore_fp_regs(vcpu->arch.guest_fpregs.fprs);
+ save_fpu_regs(¤t->thread.fpu);
+ load_fpu_from(&vcpu->arch.guest_fpregs);
return 0;
}
int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
{
- memcpy(&fpu->fprs, &vcpu->arch.guest_fpregs.fprs, sizeof(fpu->fprs));
+ memcpy(&fpu->fprs, vcpu->arch.guest_fpregs.fprs, sizeof(fpu->fprs));
fpu->fpc = vcpu->arch.guest_fpregs.fpc;
return 0;
}
@@ -2199,8 +2241,21 @@
* copying in vcpu load/put. Lets update our copies before we save
* it into the save area
*/
- save_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
- save_fp_regs(vcpu->arch.guest_fpregs.fprs);
+ save_fpu_regs(¤t->thread.fpu);
+ if (test_kvm_facility(vcpu->kvm, 129)) {
+ /*
+ * If the vector extension is available, the vector registers
+ * which overlaps with floating-point registers are saved in
+ * the SIE-control block. Hence, extract the floating-point
+ * registers and the FPC value and store them in the
+ * guest_fpregs structure.
+ */
+ WARN_ON(!is_vx_task(current)); /* XXX remove later */
+ vcpu->arch.guest_fpregs.fpc = current->thread.fpu.fpc;
+ convert_vx_to_fp(vcpu->arch.guest_fpregs.fprs,
+ current->thread.fpu.vxrs);
+ } else
+ save_fpu_to(&vcpu->arch.guest_fpregs);
save_access_regs(vcpu->run->s.regs.acrs);
return kvm_s390_store_status_unloaded(vcpu, addr);
@@ -2227,10 +2282,13 @@
/*
* The guest VXRS are in the host VXRs due to the lazy
- * copying in vcpu load/put. Let's update our copies before we save
- * it into the save area.
+ * copying in vcpu load/put. We can simply call save_fpu_regs()
+ * to save the current register state because we are in the
+ * middle of a load/put cycle.
+ *
+ * Let's update our copies before we save it into the save area.
*/
- save_vx_regs((__vector128 *)&vcpu->run->s.regs.vrs);
+ save_fpu_regs(¤t->thread.fpu);
return kvm_s390_store_adtl_status_unloaded(vcpu, addr);
}