Merge branch 'upstream'
diff --git a/CREDITS b/CREDITS
index 8e577ce..6957ef4 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3101,7 +3101,7 @@
S: Australia
N: Stephen Smalley
-E: sds@epoch.ncsc.mil
+E: sds@tycho.nsa.gov
D: portions of the Linux Security Module (LSM) framework and security modules
N: Chris Smith
diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt
index fcbcbc3..6221464 100644
--- a/Documentation/RCU/RTFP.txt
+++ b/Documentation/RCU/RTFP.txt
@@ -90,16 +90,20 @@
following year [McKenney02a], and use of RCU in dcache was first
described that same year [Linder02a].
-Also in 2002, Michael [Michael02b,Michael02a] presented techniques
-that defer the destruction of data structures to simplify non-blocking
-synchronization (wait-free synchronization, lock-free synchronization,
-and obstruction-free synchronization are all examples of non-blocking
-synchronization). In particular, this technique eliminates locking,
-reduces contention, reduces memory latency for readers, and parallelizes
-pipeline stalls and memory latency for writers. However, these
-techniques still impose significant read-side overhead in the form of
-memory barriers. Researchers at Sun worked along similar lines in the
-same timeframe [HerlihyLM02,HerlihyLMS03].
+Also in 2002, Michael [Michael02b,Michael02a] presented "hazard-pointer"
+techniques that defer the destruction of data structures to simplify
+non-blocking synchronization (wait-free synchronization, lock-free
+synchronization, and obstruction-free synchronization are all examples of
+non-blocking synchronization). In particular, this technique eliminates
+locking, reduces contention, reduces memory latency for readers, and
+parallelizes pipeline stalls and memory latency for writers. However,
+these techniques still impose significant read-side overhead in the
+form of memory barriers. Researchers at Sun worked along similar lines
+in the same timeframe [HerlihyLM02,HerlihyLMS03]. These techniques
+can be thought of as inside-out reference counts, where the count is
+represented by the number of hazard pointers referencing a given data
+structure (rather than the more conventional counter field within the
+data structure itself).
In 2003, the K42 group described how RCU could be used to create
hot-pluggable implementations of operating-system functions. Later that
@@ -113,7 +117,6 @@
describing how to make RCU safe for soft-realtime applications [Sarma04c],
and a paper describing SELinux performance with RCU [JamesMorris04b].
-
2005 has seen further adaptation of RCU to realtime use, permitting
preemption of RCU realtime critical sections [PaulMcKenney05a,
PaulMcKenney05b].
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index e118a7c..49e27cc 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -177,3 +177,9 @@
If you want to wait for some of these other things, you might
instead need to use synchronize_irq() or synchronize_sched().
+
+12. Any lock acquired by an RCU callback must be acquired elsewhere
+ with irq disabled, e.g., via spin_lock_irqsave(). Failing to
+ disable irq on a given acquisition of that lock will result in
+ deadlock as soon as the RCU callback happens to interrupt that
+ acquisition's critical section.
diff --git a/Documentation/RCU/listRCU.txt b/Documentation/RCU/listRCU.txt
index f8a54fa..1fd1753 100644
--- a/Documentation/RCU/listRCU.txt
+++ b/Documentation/RCU/listRCU.txt
@@ -232,7 +232,7 @@
return holding the per-entry spinlock, as ipc_lock() does in fact do.
Quick Quiz: Why does the search function need to return holding the
-per-entry lock for this deleted-flag technique to be helpful?
+ per-entry lock for this deleted-flag technique to be helpful?
If the system-call audit module were to ever need to reject stale data,
one way to accomplish this would be to add a "deleted" flag and a "lock"
@@ -275,8 +275,8 @@
{
struct audit_entry *e;
- /* Do not use the _rcu iterator here, since this is the only
- * deletion routine. */
+ /* Do not need to use the _rcu iterator here, since this
+ * is the only deletion routine. */
list_for_each_entry(e, list, list) {
if (!audit_compare_rule(rule, &e->rule)) {
spin_lock(&e->lock);
@@ -304,9 +304,12 @@
Answer to Quick Quiz
+ Why does the search function need to return holding the per-entry
+ lock for this deleted-flag technique to be helpful?
-If the search function drops the per-entry lock before returning, then
-the caller will be processing stale data in any case. If it is really
-OK to be processing stale data, then you don't need a "deleted" flag.
-If processing stale data really is a problem, then you need to hold the
-per-entry lock across all of the code that uses the value looked up.
+ If the search function drops the per-entry lock before returning,
+ then the caller will be processing stale data in any case. If it
+ is really OK to be processing stale data, then you don't need a
+ "deleted" flag. If processing stale data really is a problem,
+ then you need to hold the per-entry lock across all of the code
+ that uses the value that was returned.
diff --git a/Documentation/RCU/rcu.txt b/Documentation/RCU/rcu.txt
index 6fa0922..02e27bf 100644
--- a/Documentation/RCU/rcu.txt
+++ b/Documentation/RCU/rcu.txt
@@ -111,6 +111,11 @@
You are reading it!
+ rcuref.txt
+
+ Describes how to combine use of reference counts
+ with RCU.
+
whatisRCU.txt
Overview of how the RCU implementation works. Along
diff --git a/Documentation/RCU/rcuref.txt b/Documentation/RCU/rcuref.txt
index 3f60db41..451de2a 100644
--- a/Documentation/RCU/rcuref.txt
+++ b/Documentation/RCU/rcuref.txt
@@ -1,7 +1,7 @@
-Refcounter design for elements of lists/arrays protected by RCU.
+Reference-count design for elements of lists/arrays protected by RCU.
-Refcounting on elements of lists which are protected by traditional
-reader/writer spinlocks or semaphores are straight forward as in:
+Reference counting on elements of lists which are protected by traditional
+reader/writer spinlocks or semaphores are straightforward:
1. 2.
add() search_and_reference()
@@ -28,12 +28,12 @@
...
}
-If this list/array is made lock free using rcu as in changing the
-write_lock in add() and delete() to spin_lock and changing read_lock
+If this list/array is made lock free using RCU as in changing the
+write_lock() in add() and delete() to spin_lock and changing read_lock
in search_and_reference to rcu_read_lock(), the atomic_get in
search_and_reference could potentially hold reference to an element which
-has already been deleted from the list/array. atomic_inc_not_zero takes
-care of this scenario. search_and_reference should look as;
+has already been deleted from the list/array. Use atomic_inc_not_zero()
+in this scenario as follows:
1. 2.
add() search_and_reference()
@@ -51,17 +51,16 @@
release_referenced() delete()
{ {
... write_lock(&list_lock);
- atomic_dec(&el->rc, relfunc) ...
- ... delete_element
-} write_unlock(&list_lock);
- ...
+ if (atomic_dec_and_test(&el->rc)) ...
+ call_rcu(&el->head, el_free); delete_element
+ ... write_unlock(&list_lock);
+} ...
if (atomic_dec_and_test(&el->rc))
call_rcu(&el->head, el_free);
...
}
-Sometimes, reference to the element need to be obtained in the
-update (write) stream. In such cases, atomic_inc_not_zero might be an
-overkill since the spinlock serialising list updates are held. atomic_inc
-is to be used in such cases.
-
+Sometimes, a reference to the element needs to be obtained in the
+update (write) stream. In such cases, atomic_inc_not_zero() might be
+overkill, since we hold the update-side spinlock. One might instead
+use atomic_inc() in such cases.
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index 15da168..5ed85af 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -200,10 +200,11 @@
the new value, and also executes any memory-barrier instructions
required for a given CPU architecture.
- Perhaps more important, it serves to document which pointers
- are protected by RCU. That said, rcu_assign_pointer() is most
- frequently used indirectly, via the _rcu list-manipulation
- primitives such as list_add_rcu().
+ Perhaps just as important, it serves to document (1) which
+ pointers are protected by RCU and (2) the point at which a
+ given structure becomes accessible to other CPUs. That said,
+ rcu_assign_pointer() is most frequently used indirectly, via
+ the _rcu list-manipulation primitives such as list_add_rcu().
rcu_dereference()
@@ -258,9 +259,11 @@
locking.
As with rcu_assign_pointer(), an important function of
- rcu_dereference() is to document which pointers are protected
- by RCU. And, again like rcu_assign_pointer(), rcu_dereference()
- is typically used indirectly, via the _rcu list-manipulation
+ rcu_dereference() is to document which pointers are protected by
+ RCU, in particular, flagging a pointer that is subject to changing
+ at any time, including immediately after the rcu_dereference().
+ And, again like rcu_assign_pointer(), rcu_dereference() is
+ typically used indirectly, via the _rcu list-manipulation
primitives, such as list_for_each_entry_rcu().
The following diagram shows how each API communicates among the
@@ -327,7 +330,7 @@
3. WHAT ARE SOME EXAMPLE USES OF CORE RCU API?
This section shows a simple use of the core RCU API to protect a
-global pointer to a dynamically allocated structure. More typical
+global pointer to a dynamically allocated structure. More-typical
uses of RCU may be found in listRCU.txt, arrayRCU.txt, and NMI-RCU.txt.
struct foo {
@@ -410,6 +413,8 @@
data item.
See checklist.txt for additional rules to follow when using RCU.
+And again, more-typical uses of RCU may be found in listRCU.txt,
+arrayRCU.txt, and NMI-RCU.txt.
4. WHAT IF MY UPDATING THREAD CANNOT BLOCK?
@@ -513,7 +518,7 @@
for papers describing the Linux kernel RCU implementation. The OLS'01
and OLS'02 papers are a good introduction, and the dissertation provides
-more details on the current implementation.
+more details on the current implementation as of early 2004.
5A. "TOY" IMPLEMENTATION #1: LOCKING
@@ -768,7 +773,6 @@
rcu_dereference
list_for_each_rcu (to be deprecated in favor of
list_for_each_entry_rcu)
- list_for_each_safe_rcu (deprecated, not used)
list_for_each_entry_rcu
list_for_each_continue_rcu (to be deprecated in favor of new
list_for_each_entry_continue_rcu)
@@ -807,7 +811,8 @@
Answer: Consider the following sequence of events:
1. CPU 0 acquires some unrelated lock, call it
- "problematic_lock".
+ "problematic_lock", disabling irq via
+ spin_lock_irqsave().
2. CPU 1 enters synchronize_rcu(), write-acquiring
rcu_gp_mutex.
@@ -894,7 +899,7 @@
ACKNOWLEDGEMENTS
My thanks to the people who helped make this human-readable, including
-Jon Walpole, Josh Triplett, Serge Hallyn, and Suzanne Wood.
+Jon Walpole, Josh Triplett, Serge Hallyn, Suzanne Wood, and Alan Stern.
For more information, see http://www.rdrop.com/users/paulmck/RCU.
diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt
new file mode 100644
index 0000000..ff280e2
--- /dev/null
+++ b/Documentation/cputopology.txt
@@ -0,0 +1,41 @@
+
+Export cpu topology info by sysfs. Items (attributes) are similar
+to /proc/cpuinfo.
+
+1) /sys/devices/system/cpu/cpuX/topology/physical_package_id:
+represent the physical package id of cpu X;
+2) /sys/devices/system/cpu/cpuX/topology/core_id:
+represent the cpu core id to cpu X;
+3) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
+represent the thread siblings to cpu X in the same core;
+4) /sys/devices/system/cpu/cpuX/topology/core_siblings:
+represent the thread siblings to cpu X in the same physical package;
+
+To implement it in an architecture-neutral way, a new source file,
+driver/base/topology.c, is to export the 5 attributes.
+
+If one architecture wants to support this feature, it just needs to
+implement 4 defines, typically in file include/asm-XXX/topology.h.
+The 4 defines are:
+#define topology_physical_package_id(cpu)
+#define topology_core_id(cpu)
+#define topology_thread_siblings(cpu)
+#define topology_core_siblings(cpu)
+
+The type of **_id is int.
+The type of siblings is cpumask_t.
+
+To be consistent on all architectures, the 4 attributes should have
+deafult values if their values are unavailable. Below is the rule.
+1) physical_package_id: If cpu has no physical package id, -1 is the
+default value.
+2) core_id: If cpu doesn't support multi-core, its core id is 0.
+3) thread_siblings: Just include itself, if the cpu doesn't support
+HT/multi-thread.
+4) core_siblings: Just include itself, if the cpu doesn't support
+multi-core and HT/Multi-thread.
+
+So be careful when declaring the 4 defines in include/asm-XXX/topology.h.
+
+If an attribute isn't defined on an architecture, it won't be exported.
+
diff --git a/Documentation/driver-model/overview.txt b/Documentation/driver-model/overview.txt
index 44662735..ac4a7a7 100644
--- a/Documentation/driver-model/overview.txt
+++ b/Documentation/driver-model/overview.txt
@@ -1,50 +1,43 @@
The Linux Kernel Device Model
-Patrick Mochel <mochel@osdl.org>
+Patrick Mochel <mochel@digitalimplant.org>
-26 August 2002
+Drafted 26 August 2002
+Updated 31 January 2006
Overview
~~~~~~~~
-This driver model is a unification of all the current, disparate driver models
-that are currently in the kernel. It is intended to augment the
+The Linux Kernel Driver Model is a unification of all the disparate driver
+models that were previously used in the kernel. It is intended to augment the
bus-specific drivers for bridges and devices by consolidating a set of data
and operations into globally accessible data structures.
-Current driver models implement some sort of tree-like structure (sometimes
-just a list) for the devices they control. But, there is no linkage between
-the different bus types.
+Traditional driver models implemented some sort of tree-like structure
+(sometimes just a list) for the devices they control. There wasn't any
+uniformity across the different bus types.
-A common data structure can provide this linkage with little overhead: when a
-bus driver discovers a particular device, it can insert it into the global
-tree as well as its local tree. In fact, the local tree becomes just a subset
-of the global tree.
+The current driver model provides a comon, uniform data model for describing
+a bus and the devices that can appear under the bus. The unified bus
+model includes a set of common attributes which all busses carry, and a set
+of common callbacks, such as device discovery during bus probing, bus
+shutdown, bus power management, etc.
-Common data fields can also be moved out of the local bus models into the
-global model. Some of the manipulations of these fields can also be
-consolidated. Most likely, manipulation functions will become a set
-of helper functions, which the bus drivers wrap around to include any
-bus-specific items.
-
-The common device and bridge interface currently reflects the goals of the
-modern PC: namely the ability to do seamless Plug and Play, power management,
-and hot plug. (The model dictated by Intel and Microsoft (read: ACPI) ensures
-us that any device in the system may fit any of these criteria.)
-
-In reality, not every bus will be able to support such operations. But, most
-buses will support a majority of those operations, and all future buses will.
-In other words, a bus that doesn't support an operation is the exception,
-instead of the other way around.
-
+The common device and bridge interface reflects the goals of the modern
+computer: namely the ability to do seamless device "plug and play", power
+management, and hot plug. In particular, the model dictated by Intel and
+Microsoft (namely ACPI) ensures that almost every device on almost any bus
+on an x86-compatible system can work within this paradigm. Of course,
+not every bus is able to support all such operations, although most
+buses support a most of those operations.
Downstream Access
~~~~~~~~~~~~~~~~~
Common data fields have been moved out of individual bus layers into a common
-data structure. But, these fields must still be accessed by the bus layers,
+data structure. These fields must still be accessed by the bus layers,
and sometimes by the device-specific drivers.
Other bus layers are encouraged to do what has been done for the PCI layer.
@@ -53,7 +46,7 @@
struct pci_dev {
...
- struct device device;
+ struct device dev;
};
Note first that it is statically allocated. This means only one allocation on
@@ -64,9 +57,9 @@
The PCI bus layer freely accesses the fields of struct device. It knows about
the structure of struct pci_dev, and it should know the structure of struct
-device. PCI devices that have been converted generally do not touch the fields
-of struct device. More precisely, device-specific drivers should not touch
-fields of struct device unless there is a strong compelling reason to do so.
+device. Individual PCI device drivers that have been converted the the current
+driver model generally do not and should not touch the fields of struct device,
+unless there is a strong compelling reason to do so.
This abstraction is prevention of unnecessary pain during transitional phases.
If the name of the field changes or is removed, then every downstream driver
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index b4a1ea7..b730d76 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -148,3 +148,26 @@
brother on Alchemy SOCs. The loss of features is not considered an
issue.
Who: Ralf Baechle <ralf@linux-mips.org>
+
+---------------------------
+
+What: Legacy /proc/pci interface (PCI_LEGACY_PROC)
+When: March 2006
+Why: deprecated since 2.5.53 in favor of lspci(8)
+Who: Adrian Bunk <bunk@stusta.de>
+
+---------------------------
+
+What: pci_module_init(driver)
+When: January 2007
+Why: Is replaced by pci_register_driver(pci_driver).
+Who: Richard Knutsson <ricknu-0@student.ltu.se> and Greg Kroah-Hartman <gregkh@suse.de>
+
+---------------------------
+
+What: I2C interface of the it87 driver
+When: January 2007
+Why: The ISA interface is faster and should be always available. The I2C
+ probing is also known to cause trouble in at least one case (see
+ bug #5889.)
+Who: Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/filesystems/configfs/configfs_example.c b/Documentation/filesystems/configfs/configfs_example.c
index f3c6e49..3d4713a 100644
--- a/Documentation/filesystems/configfs/configfs_example.c
+++ b/Documentation/filesystems/configfs/configfs_example.c
@@ -320,6 +320,7 @@
.ct_item_ops = &simple_children_item_ops,
.ct_group_ops = &simple_children_group_ops,
.ct_attrs = simple_children_attrs,
+ .ct_owner = THIS_MODULE,
};
static struct configfs_subsystem simple_children_subsys = {
@@ -403,6 +404,7 @@
.ct_item_ops = &group_children_item_ops,
.ct_group_ops = &group_children_group_ops,
.ct_attrs = group_children_attrs,
+ .ct_owner = THIS_MODULE,
};
static struct configfs_subsystem group_children_subsys = {
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index f2595ca..4389c68 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -35,6 +35,7 @@
be cluster coherent.
- quotas
- cluster aware flock
+ - cluster aware lockf
- Directory change notification (F_NOTIFY)
- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
- POSIX ACLs
diff --git a/Documentation/hwmon/f71805f b/Documentation/hwmon/f71805f
new file mode 100644
index 0000000..28c5b7d
--- /dev/null
+++ b/Documentation/hwmon/f71805f
@@ -0,0 +1,105 @@
+Kernel driver f71805f
+=====================
+
+Supported chips:
+ * Fintek F71805F/FG
+ Prefix: 'f71805f'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: Provided by Fintek on request
+
+Author: Jean Delvare <khali@linux-fr.org>
+
+Thanks to Denis Kieft from Barracuda Networks for the donation of a
+test system (custom Jetway K8M8MS motherboard, with CPU and RAM) and
+for providing initial documentation.
+
+Thanks to Kris Chen from Fintek for answering technical questions and
+providing additional documentation.
+
+Thanks to Chris Lin from Jetway for providing wiring schematics and
+anwsering technical questions.
+
+
+Description
+-----------
+
+The Fintek F71805F/FG Super I/O chip includes complete hardware monitoring
+capabilities. It can monitor up to 9 voltages (counting its own power
+source), 3 fans and 3 temperature sensors.
+
+This chip also has fan controlling features, using either DC or PWM, in
+three different modes (one manual, two automatic). The driver doesn't
+support these features yet.
+
+The driver assumes that no more than one chip is present, which seems
+reasonable.
+
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by an 8-bit ADC with a LSB of 8 mV. The supported
+range is thus from 0 to 2.040 V. Voltage values outside of this range
+need external resistors. An exception is in0, which is used to monitor
+the chip's own power source (+3.3V), and is divided internally by a
+factor 2.
+
+The two LSB of the voltage limit registers are not used (always 0), so
+you can only set the limits in steps of 32 mV (before scaling).
+
+The wirings and resistor values suggested by Fintek are as follow:
+
+ pin expected
+ name use R1 R2 divider raw val.
+
+in0 VCC VCC3.3V int. int. 2.00 1.65 V
+in1 VIN1 VTT1.2V 10K - 1.00 1.20 V
+in2 VIN2 VRAM 100K 100K 2.00 ~1.25 V (1)
+in3 VIN3 VCHIPSET 47K 100K 1.47 2.24 V (2)
+in4 VIN4 VCC5V 200K 47K 5.25 0.95 V
+in5 VIN5 +12V 200K 20K 11.00 1.05 V
+in6 VIN6 VCC1.5V 10K - 1.00 1.50 V
+in7 VIN7 VCORE 10K - 1.00 ~1.40 V (1)
+in8 VIN8 VSB5V 200K 47K 1.00 0.95 V
+
+(1) Depends on your hardware setup.
+(2) Obviously not correct, swapping R1 and R2 would make more sense.
+
+These values can be used as hints at best, as motherboard manufacturers
+are free to use a completely different setup. As a matter of fact, the
+Jetway K8M8MS uses a significantly different setup. You will have to
+find out documentation about your own motherboard, and edit sensors.conf
+accordingly.
+
+Each voltage measured has associated low and high limits, each of which
+triggers an alarm when crossed.
+
+
+Fan Monitoring
+--------------
+
+Fan rotation speeds are reported as 12-bit values from a gated clock
+signal. Speeds down to 366 RPM can be measured. There is no theoretical
+high limit, but values over 6000 RPM seem to cause problem. The effective
+resolution is much lower than you would expect, the step between different
+register values being 10 rather than 1.
+
+The chip assumes 2 pulse-per-revolution fans.
+
+An alarm is triggered if the rotation speed drops below a programmable
+limit or is too low to be measured.
+
+
+Temperature Monitoring
+----------------------
+
+Temperatures are reported in degrees Celsius. Each temperature measured
+has a high limit, those crossing triggers an alarm. There is an associated
+hysteresis value, below which the temperature has to drop before the
+alarm is cleared.
+
+All temperature channels are external, there is no embedded temperature
+sensor. Each channel can be used for connecting either a thermal diode
+or a thermistor. The driver reports the currently selected mode, but
+doesn't allow changing it. In theory, the BIOS should have configured
+everything properly.
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 7f42e44..9555be1 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -9,7 +9,7 @@
http://www.ite.com.tw/
* IT8712F
Prefix: 'it8712'
- Addresses scanned: I2C 0x28 - 0x2f
+ Addresses scanned: I2C 0x2d
from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 764cdc5..a0d0ab2 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -179,11 +179,12 @@
****************
temp[1-3]_type Sensor type selection.
- Integers 1, 2, 3 or thermistor Beta value (3435)
+ Integers 1 to 4 or thermistor Beta value (typically 3435)
Read/Write.
1: PII/Celeron Diode
2: 3904 transistor
3: thermal diode
+ 4: thermistor (default/unknown Beta)
Not all types are supported by all chips
temp[1-4]_max Temperature max value.
@@ -261,6 +262,21 @@
of individual bits.
Bits are defined in kernel/include/sensors.h.
+alarms_in Alarm bitmask relative to in (voltage) channels
+ Read only
+ A '1' bit means an alarm, LSB corresponds to in0 and so on
+ Prefered to 'alarms' for newer chips
+
+alarms_fan Alarm bitmask relative to fan channels
+ Read only
+ A '1' bit means an alarm, LSB corresponds to fan1 and so on
+ Prefered to 'alarms' for newer chips
+
+alarms_temp Alarm bitmask relative to temp (temperature) channels
+ Read only
+ A '1' bit means an alarm, LSB corresponds to temp1 and so on
+ Prefered to 'alarms' for newer chips
+
beep_enable Beep/interrupt enable
0 to disable.
1 to enable.
diff --git a/Documentation/i2c/busses/i2c-sis69x b/Documentation/i2c/busses/i2c-sis96x
similarity index 98%
rename from Documentation/i2c/busses/i2c-sis69x
rename to Documentation/i2c/busses/i2c-sis96x
index b88953d..00a009b 100644
--- a/Documentation/i2c/busses/i2c-sis69x
+++ b/Documentation/i2c/busses/i2c-sis96x
@@ -7,7 +7,7 @@
Any combination of these host bridges:
645, 645DX (aka 646), 648, 650, 651, 655, 735, 745, 746
and these south bridges:
- 961, 962, 963(L)
+ 961, 962, 963(L)
Author: Mark M. Hoffman <mhoffman@lightlink.com>
@@ -29,7 +29,7 @@
or perhaps this...
-00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0645
+00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0645
00:02.0 ISA bridge: Silicon Integrated Systems [SiS]: Unknown device 0961
00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index c406ce6..c65233d 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -45,10 +45,10 @@
If you just want to read the ready-made books on the various
subsystems (see Documentation/DocBook/*.tmpl), just type 'make
-psdocs', or 'make pdfdocs', or 'make htmldocs', depending on your
-preference. If you would rather read a different format, you can type
-'make sgmldocs' and then use DocBook tools to convert
-Documentation/DocBook/*.sgml to a format of your choice (for example,
+psdocs', or 'make pdfdocs', or 'make htmldocs', depending on your
+preference. If you would rather read a different format, you can type
+'make sgmldocs' and then use DocBook tools to convert
+Documentation/DocBook/*.sgml to a format of your choice (for example,
'db2html ...' if 'make htmldocs' was not defined).
If you want to see man pages instead, you can do this:
@@ -124,6 +124,36 @@
Take a look around the source tree for examples.
+kernel-doc for structs, unions, enums, and typedefs
+---------------------------------------------------
+
+Beside functions you can also write documentation for structs, unions,
+enums and typedefs. Instead of the function name you must write the name
+of the declaration; the struct/union/enum/typedef must always precede
+the name. Nesting of declarations is not supported.
+Use the argument mechanism to document members or constants.
+
+Inside a struct description, you can use the "private:" and "public:"
+comment tags. Structure fields that are inside a "private:" area
+are not listed in the generated output documentation.
+
+Example:
+
+/**
+ * struct my_struct - short description
+ * @a: first member
+ * @b: second member
+ *
+ * Longer description
+ */
+struct my_struct {
+ int a;
+ int b;
+/* private: */
+ int c;
+};
+
+
How to make new SGML template files
-----------------------------------
@@ -147,4 +177,3 @@
Tim.
*/ <twaugh@redhat.com>
-
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 1cbcf65..8437036 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -452,6 +452,11 @@
eata= [HW,SCSI]
+ ec_intr= [HW,ACPI] ACPI Embedded Controller interrupt mode
+ Format: <int>
+ 0: polling mode
+ non-0: interrupt mode (default)
+
eda= [HW,PS2]
edb= [HW,PS2]
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 2b7cf19..26364d0 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -427,6 +427,23 @@
will avoid log file clutter.
Default: FALSE
+icmp_errors_use_inbound_ifaddr - BOOLEAN
+
+ If zero, icmp error messages are sent with the primary address of
+ the exiting interface.
+
+ If non-zero, the message will be sent with the primary address of
+ the interface that received the packet that caused the icmp error.
+ This is the behaviour network many administrators will expect from
+ a router. And it can make debugging complicated network layouts
+ much easier.
+
+ Note that if no primary address exists for the interface selected,
+ then the primary address of the first non-loopback interface that
+ has one will be used regarldess of this setting.
+
+ Default: 0
+
igmp_max_memberships - INTEGER
Change the maximum number of multicast groups we can subscribe to.
Default: 20
diff --git a/Documentation/parport-lowlevel.txt b/Documentation/parport-lowlevel.txt
index 1d40008..8f23024 100644
--- a/Documentation/parport-lowlevel.txt
+++ b/Documentation/parport-lowlevel.txt
@@ -1068,7 +1068,7 @@
struct parport_operations {
...
- void (*write_status) (struct parport *port, unsigned char s);
+ void (*write_control) (struct parport *port, unsigned char s);
...
};
@@ -1097,9 +1097,9 @@
struct parport_operations {
...
- void (*frob_control) (struct parport *port,
- unsigned char mask,
- unsigned char val);
+ unsigned char (*frob_control) (struct parport *port,
+ unsigned char mask,
+ unsigned char val);
...
};
diff --git a/Documentation/pci-error-recovery.txt b/Documentation/pci-error-recovery.txt
index d089967..634d3e5 100644
--- a/Documentation/pci-error-recovery.txt
+++ b/Documentation/pci-error-recovery.txt
@@ -1,246 +1,396 @@
PCI Error Recovery
------------------
- May 31, 2005
+ February 2, 2006
- Current document maintainer:
- Linas Vepstas <linas@austin.ibm.com>
+ Current document maintainer:
+ Linas Vepstas <linas@austin.ibm.com>
-Some PCI bus controllers are able to detect certain "hard" PCI errors
-on the bus, such as parity errors on the data and address busses, as
-well as SERR and PERR errors. These chipsets are then able to disable
-I/O to/from the affected device, so that, for example, a bad DMA
-address doesn't end up corrupting system memory. These same chipsets
-are also able to reset the affected PCI device, and return it to
-working condition. This document describes a generic API form
-performing error recovery.
+Many PCI bus controllers are able to detect a variety of hardware
+PCI errors on the bus, such as parity errors on the data and address
+busses, as well as SERR and PERR errors. Some of the more advanced
+chipsets are able to deal with these errors; these include PCI-E chipsets,
+and the PCI-host bridges found on IBM Power4 and Power5-based pSeries
+boxes. A typical action taken is to disconnect the affected device,
+halting all I/O to it. The goal of a disconnection is to avoid system
+corruption; for example, to halt system memory corruption due to DMA's
+to "wild" addresses. Typically, a reconnection mechanism is also
+offered, so that the affected PCI device(s) are reset and put back
+into working condition. The reset phase requires coordination
+between the affected device drivers and the PCI controller chip.
+This document describes a generic API for notifying device drivers
+of a bus disconnection, and then performing error recovery.
+This API is currently implemented in the 2.6.16 and later kernels.
-The core idea is that after a PCI error has been detected, there must
-be a way for the kernel to coordinate with all affected device drivers
-so that the pci card can be made operational again, possibly after
-performing a full electrical #RST of the PCI card. The API below
-provides a generic API for device drivers to be notified of PCI
-errors, and to be notified of, and respond to, a reset sequence.
+Reporting and recovery is performed in several steps. First, when
+a PCI hardware error has resulted in a bus disconnect, that event
+is reported as soon as possible to all affected device drivers,
+including multiple instances of a device driver on multi-function
+cards. This allows device drivers to avoid deadlocking in spinloops,
+waiting for some i/o-space register to change, when it never will.
+It also gives the drivers a chance to defer incoming I/O as
+needed.
-Preliminary sketch of API, cut-n-pasted-n-modified email from
-Ben Herrenschmidt, circa 5 april 2005
+Next, recovery is performed in several stages. Most of the complexity
+is forced by the need to handle multi-function devices, that is,
+devices that have multiple device drivers associated with them.
+In the first stage, each driver is allowed to indicate what type
+of reset it desires, the choices being a simple re-enabling of I/O
+or requesting a hard reset (a full electrical #RST of the PCI card).
+If any driver requests a full reset, that is what will be done.
+
+After a full reset and/or a re-enabling of I/O, all drivers are
+again notified, so that they may then perform any device setup/config
+that may be required. After these have all completed, a final
+"resume normal operations" event is sent out.
+
+The biggest reason for choosing a kernel-based implementation rather
+than a user-space implementation was the need to deal with bus
+disconnects of PCI devices attached to storage media, and, in particular,
+disconnects from devices holding the root file system. If the root
+file system is disconnected, a user-space mechanism would have to go
+through a large number of contortions to complete recovery. Almost all
+of the current Linux file systems are not tolerant of disconnection
+from/reconnection to their underlying block device. By contrast,
+bus errors are easy to manage in the device driver. Indeed, most
+device drivers already handle very similar recovery procedures;
+for example, the SCSI-generic layer already provides significant
+mechanisms for dealing with SCSI bus errors and SCSI bus resets.
+
+
+Detailed Design
+---------------
+Design and implementation details below, based on a chain of
+public email discussions with Ben Herrenschmidt, circa 5 April 2005.
The error recovery API support is exposed to the driver in the form of
a structure of function pointers pointed to by a new field in struct
-pci_driver. The absence of this pointer in pci_driver denotes an
-"non-aware" driver, behaviour on these is platform dependant.
-Platforms like ppc64 can try to simulate pci hotplug remove/add.
-
-The definition of "pci_error_token" is not covered here. It is based on
-Seto's work on the synchronous error detection. We still need to define
-functions for extracting infos out of an opaque error token. This is
-separate from this API.
+pci_driver. A driver that fails to provide the structure is "non-aware",
+and the actual recovery steps taken are platform dependent. The
+arch/powerpc implementation will simulate a PCI hotplug remove/add.
This structure has the form:
-
struct pci_error_handlers
{
- int (*error_detected)(struct pci_dev *dev, pci_error_token error);
+ int (*error_detected)(struct pci_dev *dev, enum pci_channel_state);
int (*mmio_enabled)(struct pci_dev *dev);
- int (*resume)(struct pci_dev *dev);
int (*link_reset)(struct pci_dev *dev);
int (*slot_reset)(struct pci_dev *dev);
+ void (*resume)(struct pci_dev *dev);
};
-A driver doesn't have to implement all of these callbacks. The
-only mandatory one is error_detected(). If a callback is not
-implemented, the corresponding feature is considered unsupported.
-For example, if mmio_enabled() and resume() aren't there, then the
-driver is assumed as not doing any direct recovery and requires
+The possible channel states are:
+enum pci_channel_state {
+ pci_channel_io_normal, /* I/O channel is in normal state */
+ pci_channel_io_frozen, /* I/O to channel is blocked */
+ pci_channel_io_perm_failure, /* PCI card is dead */
+};
+
+Possible return values are:
+enum pci_ers_result {
+ PCI_ERS_RESULT_NONE, /* no result/none/not supported in device driver */
+ PCI_ERS_RESULT_CAN_RECOVER, /* Device driver can recover without slot reset */
+ PCI_ERS_RESULT_NEED_RESET, /* Device driver wants slot to be reset. */
+ PCI_ERS_RESULT_DISCONNECT, /* Device has completely failed, is unrecoverable */
+ PCI_ERS_RESULT_RECOVERED, /* Device driver is fully recovered and operational */
+};
+
+A driver does not have to implement all of these callbacks; however,
+if it implements any, it must implement error_detected(). If a callback
+is not implemented, the corresponding feature is considered unsupported.
+For example, if mmio_enabled() and resume() aren't there, then it
+is assumed that the driver is not doing any direct recovery and requires
a reset. If link_reset() is not implemented, the card is assumed as
-not caring about link resets, in which case, if recover is supported,
-the core can try recover (but not slot_reset() unless it really did
-reset the slot). If slot_reset() is not supported, link_reset() can
-be called instead on a slot reset.
+not care about link resets. Typically a driver will want to know about
+a slot_reset().
-At first, the call will always be :
+The actual steps taken by a platform to recover from a PCI error
+event will be platform-dependent, but will follow the general
+sequence described below.
- 1) error_detected()
+STEP 0: Error Event
+-------------------
+PCI bus error is detect by the PCI hardware. On powerpc, the slot
+is isolated, in that all I/O is blocked: all reads return 0xffffffff,
+all writes are ignored.
- Error detected. This is sent once after an error has been detected. At
-this point, the device might not be accessible anymore depending on the
-platform (the slot will be isolated on ppc64). The driver may already
-have "noticed" the error because of a failing IO, but this is the proper
-"synchronisation point", that is, it gives a chance to the driver to
-cleanup, waiting for pending stuff (timers, whatever, etc...) to
-complete; it can take semaphores, schedule, etc... everything but touch
-the device. Within this function and after it returns, the driver
+
+STEP 1: Notification
+--------------------
+Platform calls the error_detected() callback on every instance of
+every driver affected by the error.
+
+At this point, the device might not be accessible anymore, depending on
+the platform (the slot will be isolated on powerpc). The driver may
+already have "noticed" the error because of a failing I/O, but this
+is the proper "synchronization point", that is, it gives the driver
+a chance to cleanup, waiting for pending stuff (timers, whatever, etc...)
+to complete; it can take semaphores, schedule, etc... everything but
+touch the device. Within this function and after it returns, the driver
shouldn't do any new IOs. Called in task context. This is sort of a
"quiesce" point. See note about interrupts at the end of this doc.
- Result codes:
- - PCIERR_RESULT_CAN_RECOVER:
- Driever returns this if it thinks it might be able to recover
+All drivers participating in this system must implement this call.
+The driver must return one of the following result codes:
+ - PCI_ERS_RESULT_CAN_RECOVER:
+ Driver returns this if it thinks it might be able to recover
the HW by just banging IOs or if it wants to be given
- a chance to extract some diagnostic informations (see
- below).
- - PCIERR_RESULT_NEED_RESET:
- Driver returns this if it thinks it can't recover unless the
- slot is reset.
- - PCIERR_RESULT_DISCONNECT:
- Return this if driver thinks it won't recover at all,
- (this will detach the driver ? or just leave it
- dangling ? to be decided)
+ a chance to extract some diagnostic information (see
+ mmio_enable, below).
+ - PCI_ERS_RESULT_NEED_RESET:
+ Driver returns this if it can't recover without a hard
+ slot reset.
+ - PCI_ERS_RESULT_DISCONNECT:
+ Driver returns this if it doesn't want to recover at all.
-So at this point, we have called error_detected() for all drivers
-on the segment that had the error. On ppc64, the slot is isolated. What
-happens now typically depends on the result from the drivers. If all
-drivers on the segment/slot return PCIERR_RESULT_CAN_RECOVER, we would
-re-enable IOs on the slot (or do nothing special if the platform doesn't
-isolate slots) and call 2). If not and we can reset slots, we go to 4),
-if neither, we have a dead slot. If it's an hotplug slot, we might
-"simulate" reset by triggering HW unplug/replug though.
+The next step taken will depend on the result codes returned by the
+drivers.
->>> Current ppc64 implementation assumes that a device driver will
->>> *not* schedule or semaphore in this routine; the current ppc64
+If all drivers on the segment/slot return PCI_ERS_RESULT_CAN_RECOVER,
+then the platform should re-enable IOs on the slot (or do nothing in
+particular, if the platform doesn't isolate slots), and recovery
+proceeds to STEP 2 (MMIO Enable).
+
+If any driver requested a slot reset (by returning PCI_ERS_RESULT_NEED_RESET),
+then recovery proceeds to STEP 4 (Slot Reset).
+
+If the platform is unable to recover the slot, the next step
+is STEP 6 (Permanent Failure).
+
+>>> The current powerpc implementation assumes that a device driver will
+>>> *not* schedule or semaphore in this routine; the current powerpc
>>> implementation uses one kernel thread to notify all devices;
->>> thus, of one device sleeps/schedules, all devices are affected.
+>>> thus, if one device sleeps/schedules, all devices are affected.
>>> Doing better requires complex multi-threaded logic in the error
>>> recovery implementation (e.g. waiting for all notification threads
>>> to "join" before proceeding with recovery.) This seems excessively
>>> complex and not worth implementing.
->>> The current ppc64 implementation doesn't much care if the device
->>> attempts i/o at this point, or not. I/O's will fail, returning
+>>> The current powerpc implementation doesn't much care if the device
+>>> attempts I/O at this point, or not. I/O's will fail, returning
>>> a value of 0xff on read, and writes will be dropped. If the device
>>> driver attempts more than 10K I/O's to a frozen adapter, it will
>>> assume that the device driver has gone into an infinite loop, and
->>> it will panic the the kernel.
+>>> it will panic the the kernel. There doesn't seem to be any other
+>>> way of stopping a device driver that insists on spinning on I/O.
- 2) mmio_enabled()
+STEP 2: MMIO Enabled
+-------------------
+The platform re-enables MMIO to the device (but typically not the
+DMA), and then calls the mmio_enabled() callback on all affected
+device drivers.
- This is the "early recovery" call. IOs are allowed again, but DMA is
+This is the "early recovery" call. IOs are allowed again, but DMA is
not (hrm... to be discussed, I prefer not), with some restrictions. This
is NOT a callback for the driver to start operations again, only to
peek/poke at the device, extract diagnostic information, if any, and
eventually do things like trigger a device local reset or some such,
-but not restart operations. This is sent if all drivers on a segment
-agree that they can try to recover and no automatic link reset was
-performed by the HW. If the platform can't just re-enable IOs without
-a slot reset or a link reset, it doesn't call this callback and goes
-directly to 3) or 4). All IOs should be done _synchronously_ from
-within this callback, errors triggered by them will be returned via
-the normal pci_check_whatever() api, no new error_detected() callback
-will be issued due to an error happening here. However, such an error
-might cause IOs to be re-blocked for the whole segment, and thus
-invalidate the recovery that other devices on the same segment might
-have done, forcing the whole segment into one of the next states,
-that is link reset or slot reset.
+but not restart operations. This is callback is made if all drivers on
+a segment agree that they can try to recover and if no automatic link reset
+was performed by the HW. If the platform can't just re-enable IOs without
+a slot reset or a link reset, it wont call this callback, and instead
+will have gone directly to STEP 3 (Link Reset) or STEP 4 (Slot Reset)
- Result codes:
- - PCIERR_RESULT_RECOVERED
+>>> The following is proposed; no platform implements this yet:
+>>> Proposal: All I/O's should be done _synchronously_ from within
+>>> this callback, errors triggered by them will be returned via
+>>> the normal pci_check_whatever() API, no new error_detected()
+>>> callback will be issued due to an error happening here. However,
+>>> such an error might cause IOs to be re-blocked for the whole
+>>> segment, and thus invalidate the recovery that other devices
+>>> on the same segment might have done, forcing the whole segment
+>>> into one of the next states, that is, link reset or slot reset.
+
+The driver should return one of the following result codes:
+ - PCI_ERS_RESULT_RECOVERED
Driver returns this if it thinks the device is fully
- functionnal and thinks it is ready to start
+ functional and thinks it is ready to start
normal driver operations again. There is no
guarantee that the driver will actually be
allowed to proceed, as another driver on the
same segment might have failed and thus triggered a
slot reset on platforms that support it.
- - PCIERR_RESULT_NEED_RESET
+ - PCI_ERS_RESULT_NEED_RESET
Driver returns this if it thinks the device is not
recoverable in it's current state and it needs a slot
reset to proceed.
- - PCIERR_RESULT_DISCONNECT
+ - PCI_ERS_RESULT_DISCONNECT
Same as above. Total failure, no recovery even after
reset driver dead. (To be defined more precisely)
->>> The current ppc64 implementation does not implement this callback.
+The next step taken depends on the results returned by the drivers.
+If all drivers returned PCI_ERS_RESULT_RECOVERED, then the platform
+proceeds to either STEP3 (Link Reset) or to STEP 5 (Resume Operations).
- 3) link_reset()
+If any driver returned PCI_ERS_RESULT_NEED_RESET, then the platform
+proceeds to STEP 4 (Slot Reset)
- This is called after the link has been reset. This is typically
-a PCI Express specific state at this point and is done whenever a
-non-fatal error has been detected that can be "solved" by resetting
-the link. This call informs the driver of the reset and the driver
-should check if the device appears to be in working condition.
-This function acts a bit like 2) mmio_enabled(), in that the driver
-is not supposed to restart normal driver I/O operations right away.
-Instead, it should just "probe" the device to check it's recoverability
-status. If all is right, then the core will call resume() once all
-drivers have ack'd link_reset().
+>>> The current powerpc implementation does not implement this callback.
+
+
+STEP 3: Link Reset
+------------------
+The platform resets the link, and then calls the link_reset() callback
+on all affected device drivers. This is a PCI-Express specific state
+and is done whenever a non-fatal error has been detected that can be
+"solved" by resetting the link. This call informs the driver of the
+reset and the driver should check to see if the device appears to be
+in working condition.
+
+The driver is not supposed to restart normal driver I/O operations
+at this point. It should limit itself to "probing" the device to
+check it's recoverability status. If all is right, then the platform
+will call resume() once all drivers have ack'd link_reset().
Result codes:
- (identical to mmio_enabled)
+ (identical to STEP 3 (MMIO Enabled)
->>> The current ppc64 implementation does not implement this callback.
+The platform then proceeds to either STEP 4 (Slot Reset) or STEP 5
+(Resume Operations).
- 4) slot_reset()
+>>> The current powerpc implementation does not implement this callback.
- This is called after the slot has been soft or hard reset by the
-platform. A soft reset consists of asserting the adapter #RST line
-and then restoring the PCI BARs and PCI configuration header. If the
-platform supports PCI hotplug, then it might instead perform a hard
-reset by toggling power on the slot off/on. This call gives drivers
-the chance to re-initialize the hardware (re-download firmware, etc.),
-but drivers shouldn't restart normal I/O processing operations at
-this point. (See note about interrupts; interrupts aren't guaranteed
-to be delivered until the resume() callback has been called). If all
-device drivers report success on this callback, the patform will call
-resume() to complete the error handling and let the driver restart
-normal I/O processing.
+
+STEP 4: Slot Reset
+------------------
+The platform performs a soft or hard reset of the device, and then
+calls the slot_reset() callback.
+
+A soft reset consists of asserting the adapter #RST line and then
+restoring the PCI BAR's and PCI configuration header to a state
+that is equivalent to what it would be after a fresh system
+power-on followed by power-on BIOS/system firmware initialization.
+If the platform supports PCI hotplug, then the reset might be
+performed by toggling the slot electrical power off/on.
+
+It is important for the platform to restore the PCI config space
+to the "fresh poweron" state, rather than the "last state". After
+a slot reset, the device driver will almost always use its standard
+device initialization routines, and an unusual config space setup
+may result in hung devices, kernel panics, or silent data corruption.
+
+This call gives drivers the chance to re-initialize the hardware
+(re-download firmware, etc.). At this point, the driver may assume
+that he card is in a fresh state and is fully functional. In
+particular, interrupt generation should work normally.
+
+Drivers should not yet restart normal I/O processing operations
+at this point. If all device drivers report success on this
+callback, the platform will call resume() to complete the sequence,
+and let the driver restart normal I/O processing.
A driver can still return a critical failure for this function if
it can't get the device operational after reset. If the platform
-previously tried a soft reset, it migh now try a hard reset (power
+previously tried a soft reset, it might now try a hard reset (power
cycle) and then call slot_reset() again. It the device still can't
be recovered, there is nothing more that can be done; the platform
will typically report a "permanent failure" in such a case. The
device will be considered "dead" in this case.
+Drivers for multi-function cards will need to coordinate among
+themselves as to which driver instance will perform any "one-shot"
+or global device initialization. For example, the Symbios sym53cxx2
+driver performs device init only from PCI function 0:
+
++ if (PCI_FUNC(pdev->devfn) == 0)
++ sym_reset_scsi_bus(np, 0);
+
Result codes:
- - PCIERR_RESULT_DISCONNECT
+ - PCI_ERS_RESULT_DISCONNECT
Same as above.
->>> The current ppc64 implementation does not try a power-cycle reset
->>> if the driver returned PCIERR_RESULT_DISCONNECT. However, it should.
+Platform proceeds either to STEP 5 (Resume Operations) or STEP 6 (Permanent
+Failure).
- 5) resume()
+>>> The current powerpc implementation does not currently try a
+>>> power-cycle reset if the driver returned PCI_ERS_RESULT_DISCONNECT.
+>>> However, it probably should.
- This is called if all drivers on the segment have returned
-PCIERR_RESULT_RECOVERED from one of the 3 prevous callbacks.
-That basically tells the driver to restart activity, tht everything
-is back and running. No result code is taken into account here. If
-a new error happens, it will restart a new error handling process.
-That's it. I think this covers all the possibilities. The way those
-callbacks are called is platform policy. A platform with no slot reset
-capability for example may want to just "ignore" drivers that can't
+STEP 5: Resume Operations
+-------------------------
+The platform will call the resume() callback on all affected device
+drivers if all drivers on the segment have returned
+PCI_ERS_RESULT_RECOVERED from one of the 3 previous callbacks.
+The goal of this callback is to tell the driver to restart activity,
+that everything is back and running. This callback does not return
+a result code.
+
+At this point, if a new error happens, the platform will restart
+a new error recovery sequence.
+
+STEP 6: Permanent Failure
+-------------------------
+A "permanent failure" has occurred, and the platform cannot recover
+the device. The platform will call error_detected() with a
+pci_channel_state value of pci_channel_io_perm_failure.
+
+The device driver should, at this point, assume the worst. It should
+cancel all pending I/O, refuse all new I/O, returning -EIO to
+higher layers. The device driver should then clean up all of its
+memory and remove itself from kernel operations, much as it would
+during system shutdown.
+
+The platform will typically notify the system operator of the
+permanent failure in some way. If the device is hotplug-capable,
+the operator will probably want to remove and replace the device.
+Note, however, not all failures are truly "permanent". Some are
+caused by over-heating, some by a poorly seated card. Many
+PCI error events are caused by software bugs, e.g. DMA's to
+wild addresses or bogus split transactions due to programming
+errors. See the discussion in powerpc/eeh-pci-error-recovery.txt
+for additional detail on real-life experience of the causes of
+software errors.
+
+
+Conclusion; General Remarks
+---------------------------
+The way those callbacks are called is platform policy. A platform with
+no slot reset capability may want to just "ignore" drivers that can't
recover (disconnect them) and try to let other cards on the same segment
recover. Keep in mind that in most real life cases, though, there will
be only one driver per segment.
-Now, there is a note about interrupts. If you get an interrupt and your
+Now, a note about interrupts. If you get an interrupt and your
device is dead or has been isolated, there is a problem :)
-
-After much thinking, I decided to leave that to the platform. That is,
-the recovery API only precies that:
+The current policy is to turn this into a platform policy.
+That is, the recovery API only requires that:
- There is no guarantee that interrupt delivery can proceed from any
device on the segment starting from the error detection and until the
-restart callback is sent, at which point interrupts are expected to be
+resume callback is sent, at which point interrupts are expected to be
fully operational.
- - There is no guarantee that interrupt delivery is stopped, that is, ad
-river that gets an interrupts after detecting an error, or that detects
-and error within the interrupt handler such that it prevents proper
+ - There is no guarantee that interrupt delivery is stopped, that is,
+a driver that gets an interrupt after detecting an error, or that detects
+an error within the interrupt handler such that it prevents proper
ack'ing of the interrupt (and thus removal of the source) should just
-return IRQ_NOTHANDLED. It's up to the platform to deal with taht
-condition, typically by masking the irq source during the duration of
+return IRQ_NOTHANDLED. It's up to the platform to deal with that
+condition, typically by masking the IRQ source during the duration of
the error handling. It is expected that the platform "knows" which
interrupts are routed to error-management capable slots and can deal
-with temporarily disabling that irq number during error processing (this
+with temporarily disabling that IRQ number during error processing (this
isn't terribly complex). That means some IRQ latency for other devices
sharing the interrupt, but there is simply no other way. High end
platforms aren't supposed to share interrupts between many devices
anyway :)
+>>> Implementation details for the powerpc platform are discussed in
+>>> the file Documentation/powerpc/eeh-pci-error-recovery.txt
-Revised: 31 May 2005 Linas Vepstas <linas@austin.ibm.com>
+>>> As of this writing, there are six device drivers with patches
+>>> implementing error recovery. Not all of these patches are in
+>>> mainline yet. These may be used as "examples":
+>>>
+>>> drivers/scsi/ipr.c
+>>> drivers/scsi/sym53cxx_2
+>>> drivers/next/e100.c
+>>> drivers/net/e1000
+>>> drivers/net/ixgb
+>>> drivers/net/s2io.c
+
+The End
+-------
diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt
index bd4ffb5..4117802 100644
--- a/Documentation/power/interface.txt
+++ b/Documentation/power/interface.txt
@@ -44,7 +44,7 @@
/sys/power/image_size controls the size of the image created by
the suspend-to-disk mechanism. It can be written a string
representing a non-negative integer that will be used as an upper
-limit of the image size, in megabytes. The suspend-to-disk mechanism will
+limit of the image size, in bytes. The suspend-to-disk mechanism will
do its best to ensure the image size will not exceed that number. However,
if this turns out to be impossible, it will try to suspend anyway using the
smallest image possible. In particular, if "0" is written to this file, the
diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
index 08c79d4..b28b7f0 100644
--- a/Documentation/power/swsusp.txt
+++ b/Documentation/power/swsusp.txt
@@ -27,7 +27,7 @@
echo platform > /sys/power/disk; echo disk > /sys/power/state
-If you want to limit the suspend image size to N megabytes, do
+If you want to limit the suspend image size to N bytes, do
echo N > /sys/power/image_size
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
new file mode 100644
index 0000000..54e5f9b
--- /dev/null
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -0,0 +1,1428 @@
+ Booting the Linux/ppc kernel without Open Firmware
+ --------------------------------------------------
+
+
+(c) 2005 Benjamin Herrenschmidt <benh at kernel.crashing.org>,
+ IBM Corp.
+(c) 2005 Becky Bruce <becky.bruce at freescale.com>,
+ Freescale Semiconductor, FSL SOC and 32-bit additions
+
+ May 18, 2005: Rev 0.1 - Initial draft, no chapter III yet.
+
+ May 19, 2005: Rev 0.2 - Add chapter III and bits & pieces here or
+ clarifies the fact that a lot of things are
+ optional, the kernel only requires a very
+ small device tree, though it is encouraged
+ to provide an as complete one as possible.
+
+ May 24, 2005: Rev 0.3 - Precise that DT block has to be in RAM
+ - Misc fixes
+ - Define version 3 and new format version 16
+ for the DT block (version 16 needs kernel
+ patches, will be fwd separately).
+ String block now has a size, and full path
+ is replaced by unit name for more
+ compactness.
+ linux,phandle is made optional, only nodes
+ that are referenced by other nodes need it.
+ "name" property is now automatically
+ deduced from the unit name
+
+ June 1, 2005: Rev 0.4 - Correct confusion between OF_DT_END and
+ OF_DT_END_NODE in structure definition.
+ - Change version 16 format to always align
+ property data to 4 bytes. Since tokens are
+ already aligned, that means no specific
+ required alignement between property size
+ and property data. The old style variable
+ alignment would make it impossible to do
+ "simple" insertion of properties using
+ memove (thanks Milton for
+ noticing). Updated kernel patch as well
+ - Correct a few more alignement constraints
+ - Add a chapter about the device-tree
+ compiler and the textural representation of
+ the tree that can be "compiled" by dtc.
+
+
+ November 21, 2005: Rev 0.5
+ - Additions/generalizations for 32-bit
+ - Changed to reflect the new arch/powerpc
+ structure
+ - Added chapter VI
+
+
+ ToDo:
+ - Add some definitions of interrupt tree (simple/complex)
+ - Add some definitions for pci host bridges
+ - Add some common address format examples
+ - Add definitions for standard properties and "compatible"
+ names for cells that are not already defined by the existing
+ OF spec.
+ - Compare FSL SOC use of PCI to standard and make sure no new
+ node definition required.
+ - Add more information about node definitions for SOC devices
+ that currently have no standard, like the FSL CPM.
+
+
+I - Introduction
+================
+
+During the recent development of the Linux/ppc64 kernel, and more
+specifically, the addition of new platform types outside of the old
+IBM pSeries/iSeries pair, it was decided to enforce some strict rules
+regarding the kernel entry and bootloader <-> kernel interfaces, in
+order to avoid the degeneration that had become the ppc32 kernel entry
+point and the way a new platform should be added to the kernel. The
+legacy iSeries platform breaks those rules as it predates this scheme,
+but no new board support will be accepted in the main tree that
+doesn't follows them properly. In addition, since the advent of the
+arch/powerpc merged architecture for ppc32 and ppc64, new 32-bit
+platforms and 32-bit platforms which move into arch/powerpc will be
+required to use these rules as well.
+
+The main requirement that will be defined in more detail below is
+the presence of a device-tree whose format is defined after Open
+Firmware specification. However, in order to make life easier
+to embedded board vendors, the kernel doesn't require the device-tree
+to represent every device in the system and only requires some nodes
+and properties to be present. This will be described in detail in
+section III, but, for example, the kernel does not require you to
+create a node for every PCI device in the system. It is a requirement
+to have a node for PCI host bridges in order to provide interrupt
+routing informations and memory/IO ranges, among others. It is also
+recommended to define nodes for on chip devices and other busses that
+don't specifically fit in an existing OF specification. This creates a
+great flexibility in the way the kernel can then probe those and match
+drivers to device, without having to hard code all sorts of tables. It
+also makes it more flexible for board vendors to do minor hardware
+upgrades without significantly impacting the kernel code or cluttering
+it with special cases.
+
+
+1) Entry point for arch/powerpc
+-------------------------------
+
+ There is one and one single entry point to the kernel, at the start
+ of the kernel image. That entry point supports two calling
+ conventions:
+
+ a) Boot from Open Firmware. If your firmware is compatible
+ with Open Firmware (IEEE 1275) or provides an OF compatible
+ client interface API (support for "interpret" callback of
+ forth words isn't required), you can enter the kernel with:
+
+ r5 : OF callback pointer as defined by IEEE 1275
+ bindings to powerpc. Only the 32 bit client interface
+ is currently supported
+
+ r3, r4 : address & length of an initrd if any or 0
+
+ The MMU is either on or off; the kernel will run the
+ trampoline located in arch/powerpc/kernel/prom_init.c to
+ extract the device-tree and other information from open
+ firmware and build a flattened device-tree as described
+ in b). prom_init() will then re-enter the kernel using
+ the second method. This trampoline code runs in the
+ context of the firmware, which is supposed to handle all
+ exceptions during that time.
+
+ b) Direct entry with a flattened device-tree block. This entry
+ point is called by a) after the OF trampoline and can also be
+ called directly by a bootloader that does not support the Open
+ Firmware client interface. It is also used by "kexec" to
+ implement "hot" booting of a new kernel from a previous
+ running one. This method is what I will describe in more
+ details in this document, as method a) is simply standard Open
+ Firmware, and thus should be implemented according to the
+ various standard documents defining it and its binding to the
+ PowerPC platform. The entry point definition then becomes:
+
+ r3 : physical pointer to the device-tree block
+ (defined in chapter II) in RAM
+
+ r4 : physical pointer to the kernel itself. This is
+ used by the assembly code to properly disable the MMU
+ in case you are entering the kernel with MMU enabled
+ and a non-1:1 mapping.
+
+ r5 : NULL (as to differenciate with method a)
+
+ Note about SMP entry: Either your firmware puts your other
+ CPUs in some sleep loop or spin loop in ROM where you can get
+ them out via a soft reset or some other means, in which case
+ you don't need to care, or you'll have to enter the kernel
+ with all CPUs. The way to do that with method b) will be
+ described in a later revision of this document.
+
+
+2) Board support
+----------------
+
+64-bit kernels:
+
+ Board supports (platforms) are not exclusive config options. An
+ arbitrary set of board supports can be built in a single kernel
+ image. The kernel will "know" what set of functions to use for a
+ given platform based on the content of the device-tree. Thus, you
+ should:
+
+ a) add your platform support as a _boolean_ option in
+ arch/powerpc/Kconfig, following the example of PPC_PSERIES,
+ PPC_PMAC and PPC_MAPLE. The later is probably a good
+ example of a board support to start from.
+
+ b) create your main platform file as
+ "arch/powerpc/platforms/myplatform/myboard_setup.c" and add it
+ to the Makefile under the condition of your CONFIG_
+ option. This file will define a structure of type "ppc_md"
+ containing the various callbacks that the generic code will
+ use to get to your platform specific code
+
+ c) Add a reference to your "ppc_md" structure in the
+ "machines" table in arch/powerpc/kernel/setup_64.c if you are
+ a 64-bit platform.
+
+ d) request and get assigned a platform number (see PLATFORM_*
+ constants in include/asm-powerpc/processor.h
+
+32-bit embedded kernels:
+
+ Currently, board support is essentially an exclusive config option.
+ The kernel is configured for a single platform. Part of the reason
+ for this is to keep kernels on embedded systems small and efficient;
+ part of this is due to the fact the code is already that way. In the
+ future, a kernel may support multiple platforms, but only if the
+ platforms feature the same core architectire. A single kernel build
+ cannot support both configurations with Book E and configurations
+ with classic Powerpc architectures.
+
+ 32-bit embedded platforms that are moved into arch/powerpc using a
+ flattened device tree should adopt the merged tree practice of
+ setting ppc_md up dynamically, even though the kernel is currently
+ built with support for only a single platform at a time. This allows
+ unification of the setup code, and will make it easier to go to a
+ multiple-platform-support model in the future.
+
+NOTE: I believe the above will be true once Ben's done with the merge
+of the boot sequences.... someone speak up if this is wrong!
+
+ To add a 32-bit embedded platform support, follow the instructions
+ for 64-bit platforms above, with the exception that the Kconfig
+ option should be set up such that the kernel builds exclusively for
+ the platform selected. The processor type for the platform should
+ enable another config option to select the specific board
+ supported.
+
+NOTE: If ben doesn't merge the setup files, may need to change this to
+point to setup_32.c
+
+
+ I will describe later the boot process and various callbacks that
+ your platform should implement.
+
+
+II - The DT block format
+========================
+
+
+This chapter defines the actual format of the flattened device-tree
+passed to the kernel. The actual content of it and kernel requirements
+are described later. You can find example of code manipulating that
+format in various places, including arch/powerpc/kernel/prom_init.c
+which will generate a flattened device-tree from the Open Firmware
+representation, or the fs2dt utility which is part of the kexec tools
+which will generate one from a filesystem representation. It is
+expected that a bootloader like uboot provides a bit more support,
+that will be discussed later as well.
+
+Note: The block has to be in main memory. It has to be accessible in
+both real mode and virtual mode with no mapping other than main
+memory. If you are writing a simple flash bootloader, it should copy
+the block to RAM before passing it to the kernel.
+
+
+1) Header
+---------
+
+ The kernel is entered with r3 pointing to an area of memory that is
+ roughtly described in include/asm-powerpc/prom.h by the structure
+ boot_param_header:
+
+struct boot_param_header {
+ u32 magic; /* magic word OF_DT_HEADER */
+ u32 totalsize; /* total size of DT block */
+ u32 off_dt_struct; /* offset to structure */
+ u32 off_dt_strings; /* offset to strings */
+ u32 off_mem_rsvmap; /* offset to memory reserve map
+*/
+ u32 version; /* format version */
+ u32 last_comp_version; /* last compatible version */
+
+ /* version 2 fields below */
+ u32 boot_cpuid_phys; /* Which physical CPU id we're
+ booting on */
+ /* version 3 fields below */
+ u32 size_dt_strings; /* size of the strings block */
+};
+
+ Along with the constants:
+
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER 0xd00dfeed /* 4: version,
+ 4: total size */
+#define OF_DT_BEGIN_NODE 0x1 /* Start node: full name
+*/
+#define OF_DT_END_NODE 0x2 /* End node */
+#define OF_DT_PROP 0x3 /* Property: name off,
+ size, content */
+#define OF_DT_END 0x9
+
+ All values in this header are in big endian format, the various
+ fields in this header are defined more precisely below. All
+ "offset" values are in bytes from the start of the header; that is
+ from the value of r3.
+
+ - magic
+
+ This is a magic value that "marks" the beginning of the
+ device-tree block header. It contains the value 0xd00dfeed and is
+ defined by the constant OF_DT_HEADER
+
+ - totalsize
+
+ This is the total size of the DT block including the header. The
+ "DT" block should enclose all data structures defined in this
+ chapter (who are pointed to by offsets in this header). That is,
+ the device-tree structure, strings, and the memory reserve map.
+
+ - off_dt_struct
+
+ This is an offset from the beginning of the header to the start
+ of the "structure" part the device tree. (see 2) device tree)
+
+ - off_dt_strings
+
+ This is an offset from the beginning of the header to the start
+ of the "strings" part of the device-tree
+
+ - off_mem_rsvmap
+
+ This is an offset from the beginning of the header to the start
+ of the reserved memory map. This map is a list of pairs of 64
+ bit integers. Each pair is a physical address and a size. The
+
+ list is terminated by an entry of size 0. This map provides the
+ kernel with a list of physical memory areas that are "reserved"
+ and thus not to be used for memory allocations, especially during
+ early initialization. The kernel needs to allocate memory during
+ boot for things like un-flattening the device-tree, allocating an
+ MMU hash table, etc... Those allocations must be done in such a
+ way to avoid overriding critical things like, on Open Firmware
+ capable machines, the RTAS instance, or on some pSeries, the TCE
+ tables used for the iommu. Typically, the reserve map should
+ contain _at least_ this DT block itself (header,total_size). If
+ you are passing an initrd to the kernel, you should reserve it as
+ well. You do not need to reserve the kernel image itself. The map
+ should be 64 bit aligned.
+
+ - version
+
+ This is the version of this structure. Version 1 stops
+ here. Version 2 adds an additional field boot_cpuid_phys.
+ Version 3 adds the size of the strings block, allowing the kernel
+ to reallocate it easily at boot and free up the unused flattened
+ structure after expansion. Version 16 introduces a new more
+ "compact" format for the tree itself that is however not backward
+ compatible. You should always generate a structure of the highest
+ version defined at the time of your implementation. Currently
+ that is version 16, unless you explicitely aim at being backward
+ compatible.
+
+ - last_comp_version
+
+ Last compatible version. This indicates down to what version of
+ the DT block you are backward compatible. For example, version 2
+ is backward compatible with version 1 (that is, a kernel build
+ for version 1 will be able to boot with a version 2 format). You
+ should put a 1 in this field if you generate a device tree of
+ version 1 to 3, or 0x10 if you generate a tree of version 0x10
+ using the new unit name format.
+
+ - boot_cpuid_phys
+
+ This field only exist on version 2 headers. It indicate which
+ physical CPU ID is calling the kernel entry point. This is used,
+ among others, by kexec. If you are on an SMP system, this value
+ should match the content of the "reg" property of the CPU node in
+ the device-tree corresponding to the CPU calling the kernel entry
+ point (see further chapters for more informations on the required
+ device-tree contents)
+
+
+ So the typical layout of a DT block (though the various parts don't
+ need to be in that order) looks like this (addresses go from top to
+ bottom):
+
+
+ ------------------------------
+ r3 -> | struct boot_param_header |
+ ------------------------------
+ | (alignment gap) (*) |
+ ------------------------------
+ | memory reserve map |
+ ------------------------------
+ | (alignment gap) |
+ ------------------------------
+ | |
+ | device-tree structure |
+ | |
+ ------------------------------
+ | (alignment gap) |
+ ------------------------------
+ | |
+ | device-tree strings |
+ | |
+ -----> ------------------------------
+ |
+ |
+ --- (r3 + totalsize)
+
+ (*) The alignment gaps are not necessarily present; their presence
+ and size are dependent on the various alignment requirements of
+ the individual data blocks.
+
+
+2) Device tree generalities
+---------------------------
+
+This device-tree itself is separated in two different blocks, a
+structure block and a strings block. Both need to be aligned to a 4
+byte boundary.
+
+First, let's quickly describe the device-tree concept before detailing
+the storage format. This chapter does _not_ describe the detail of the
+required types of nodes & properties for the kernel, this is done
+later in chapter III.
+
+The device-tree layout is strongly inherited from the definition of
+the Open Firmware IEEE 1275 device-tree. It's basically a tree of
+nodes, each node having two or more named properties. A property can
+have a value or not.
+
+It is a tree, so each node has one and only one parent except for the
+root node who has no parent.
+
+A node has 2 names. The actual node name is generally contained in a
+property of type "name" in the node property list whose value is a
+zero terminated string and is mandatory for version 1 to 3 of the
+format definition (as it is in Open Firmware). Version 0x10 makes it
+optional as it can generate it from the unit name defined below.
+
+There is also a "unit name" that is used to differenciate nodes with
+the same name at the same level, it is usually made of the node
+name's, the "@" sign, and a "unit address", which definition is
+specific to the bus type the node sits on.
+
+The unit name doesn't exist as a property per-se but is included in
+the device-tree structure. It is typically used to represent "path" in
+the device-tree. More details about the actual format of these will be
+below.
+
+The kernel powerpc generic code does not make any formal use of the
+unit address (though some board support code may do) so the only real
+requirement here for the unit address is to ensure uniqueness of
+the node unit name at a given level of the tree. Nodes with no notion
+of address and no possible sibling of the same name (like /memory or
+/cpus) may omit the unit address in the context of this specification,
+or use the "@0" default unit address. The unit name is used to define
+a node "full path", which is the concatenation of all parent node
+unit names separated with "/".
+
+The root node doesn't have a defined name, and isn't required to have
+a name property either if you are using version 3 or earlier of the
+format. It also has no unit address (no @ symbol followed by a unit
+address). The root node unit name is thus an empty string. The full
+path to the root node is "/".
+
+Every node which actually represents an actual device (that is, a node
+which isn't only a virtual "container" for more nodes, like "/cpus"
+is) is also required to have a "device_type" property indicating the
+type of node .
+
+Finally, every node that can be referenced from a property in another
+node is required to have a "linux,phandle" property. Real open
+firmware implementations provide a unique "phandle" value for every
+node that the "prom_init()" trampoline code turns into
+"linux,phandle" properties. However, this is made optional if the
+flattened device tree is used directly. An example of a node
+referencing another node via "phandle" is when laying out the
+interrupt tree which will be described in a further version of this
+document.
+
+This "linux, phandle" property is a 32 bit value that uniquely
+identifies a node. You are free to use whatever values or system of
+values, internal pointers, or whatever to generate these, the only
+requirement is that every node for which you provide that property has
+a unique value for it.
+
+Here is an example of a simple device-tree. In this example, an "o"
+designates a node followed by the node unit name. Properties are
+presented with their name followed by their content. "content"
+represents an ASCII string (zero terminated) value, while <content>
+represents a 32 bit hexadecimal value. The various nodes in this
+example will be discussed in a later chapter. At this point, it is
+only meant to give you a idea of what a device-tree looks like. I have
+purposefully kept the "name" and "linux,phandle" properties which
+aren't necessary in order to give you a better idea of what the tree
+looks like in practice.
+
+ / o device-tree
+ |- name = "device-tree"
+ |- model = "MyBoardName"
+ |- compatible = "MyBoardFamilyName"
+ |- #address-cells = <2>
+ |- #size-cells = <2>
+ |- linux,phandle = <0>
+ |
+ o cpus
+ | | - name = "cpus"
+ | | - linux,phandle = <1>
+ | | - #address-cells = <1>
+ | | - #size-cells = <0>
+ | |
+ | o PowerPC,970@0
+ | |- name = "PowerPC,970"
+ | |- device_type = "cpu"
+ | |- reg = <0>
+ | |- clock-frequency = <5f5e1000>
+ | |- linux,boot-cpu
+ | |- linux,phandle = <2>
+ |
+ o memory@0
+ | |- name = "memory"
+ | |- device_type = "memory"
+ | |- reg = <00000000 00000000 00000000 20000000>
+ | |- linux,phandle = <3>
+ |
+ o chosen
+ |- name = "chosen"
+ |- bootargs = "root=/dev/sda2"
+ |- linux,platform = <00000600>
+ |- linux,phandle = <4>
+
+This tree is almost a minimal tree. It pretty much contains the
+minimal set of required nodes and properties to boot a linux kernel;
+that is, some basic model informations at the root, the CPUs, and the
+physical memory layout. It also includes misc information passed
+through /chosen, like in this example, the platform type (mandatory)
+and the kernel command line arguments (optional).
+
+The /cpus/PowerPC,970@0/linux,boot-cpu property is an example of a
+property without a value. All other properties have a value. The
+significance of the #address-cells and #size-cells properties will be
+explained in chapter IV which defines precisely the required nodes and
+properties and their content.
+
+
+3) Device tree "structure" block
+
+The structure of the device tree is a linearized tree structure. The
+"OF_DT_BEGIN_NODE" token starts a new node, and the "OF_DT_END_NODE"
+ends that node definition. Child nodes are simply defined before
+"OF_DT_END_NODE" (that is nodes within the node). A 'token' is a 32
+bit value. The tree has to be "finished" with a OF_DT_END token
+
+Here's the basic structure of a single node:
+
+ * token OF_DT_BEGIN_NODE (that is 0x00000001)
+ * for version 1 to 3, this is the node full path as a zero
+ terminated string, starting with "/". For version 16 and later,
+ this is the node unit name only (or an empty string for the
+ root node)
+ * [align gap to next 4 bytes boundary]
+ * for each property:
+ * token OF_DT_PROP (that is 0x00000003)
+ * 32 bit value of property value size in bytes (or 0 of no
+ * value)
+ * 32 bit value of offset in string block of property name
+ * property value data if any
+ * [align gap to next 4 bytes boundary]
+ * [child nodes if any]
+ * token OF_DT_END_NODE (that is 0x00000002)
+
+So the node content can be summmarised as a start token, a full path,
+a list of properties, a list of child node and an end token. Every
+child node is a full node structure itself as defined above.
+
+4) Device tree 'strings" block
+
+In order to save space, property names, which are generally redundant,
+are stored separately in the "strings" block. This block is simply the
+whole bunch of zero terminated strings for all property names
+concatenated together. The device-tree property definitions in the
+structure block will contain offset values from the beginning of the
+strings block.
+
+
+III - Required content of the device tree
+=========================================
+
+WARNING: All "linux,*" properties defined in this document apply only
+to a flattened device-tree. If your platform uses a real
+implementation of Open Firmware or an implementation compatible with
+the Open Firmware client interface, those properties will be created
+by the trampoline code in the kernel's prom_init() file. For example,
+that's where you'll have to add code to detect your board model and
+set the platform number. However, when using the flatenned device-tree
+entry point, there is no prom_init() pass, and thus you have to
+provide those properties yourself.
+
+
+1) Note about cells and address representation
+----------------------------------------------
+
+The general rule is documented in the various Open Firmware
+documentations. If you chose to describe a bus with the device-tree
+and there exist an OF bus binding, then you should follow the
+specification. However, the kernel does not require every single
+device or bus to be described by the device tree.
+
+In general, the format of an address for a device is defined by the
+parent bus type, based on the #address-cells and #size-cells
+property. In the absence of such a property, the parent's parent
+values are used, etc... The kernel requires the root node to have
+those properties defining addresses format for devices directly mapped
+on the processor bus.
+
+Those 2 properties define 'cells' for representing an address and a
+size. A "cell" is a 32 bit number. For example, if both contain 2
+like the example tree given above, then an address and a size are both
+composed of 2 cells, and each is a 64 bit number (cells are
+concatenated and expected to be in big endian format). Another example
+is the way Apple firmware defines them, with 2 cells for an address
+and one cell for a size. Most 32-bit implementations should define
+#address-cells and #size-cells to 1, which represents a 32-bit value.
+Some 32-bit processors allow for physical addresses greater than 32
+bits; these processors should define #address-cells as 2.
+
+"reg" properties are always a tuple of the type "address size" where
+the number of cells of address and size is specified by the bus
+#address-cells and #size-cells. When a bus supports various address
+spaces and other flags relative to a given address allocation (like
+prefetchable, etc...) those flags are usually added to the top level
+bits of the physical address. For example, a PCI physical address is
+made of 3 cells, the bottom two containing the actual address itself
+while the top cell contains address space indication, flags, and pci
+bus & device numbers.
+
+For busses that support dynamic allocation, it's the accepted practice
+to then not provide the address in "reg" (keep it 0) though while
+providing a flag indicating the address is dynamically allocated, and
+then, to provide a separate "assigned-addresses" property that
+contains the fully allocated addresses. See the PCI OF bindings for
+details.
+
+In general, a simple bus with no address space bits and no dynamic
+allocation is preferred if it reflects your hardware, as the existing
+kernel address parsing functions will work out of the box. If you
+define a bus type with a more complex address format, including things
+like address space bits, you'll have to add a bus translator to the
+prom_parse.c file of the recent kernels for your bus type.
+
+The "reg" property only defines addresses and sizes (if #size-cells
+is
+non-0) within a given bus. In order to translate addresses upward
+(that is into parent bus addresses, and possibly into cpu physical
+addresses), all busses must contain a "ranges" property. If the
+"ranges" property is missing at a given level, it's assumed that
+translation isn't possible. The format of the "ranges" proprety for a
+bus is a list of:
+
+ bus address, parent bus address, size
+
+"bus address" is in the format of the bus this bus node is defining,
+that is, for a PCI bridge, it would be a PCI address. Thus, (bus
+address, size) defines a range of addresses for child devices. "parent
+bus address" is in the format of the parent bus of this bus. For
+example, for a PCI host controller, that would be a CPU address. For a
+PCI<->ISA bridge, that would be a PCI address. It defines the base
+address in the parent bus where the beginning of that range is mapped.
+
+For a new 64 bit powerpc board, I recommend either the 2/2 format or
+Apple's 2/1 format which is slightly more compact since sizes usually
+fit in a single 32 bit word. New 32 bit powerpc boards should use a
+1/1 format, unless the processor supports physical addresses greater
+than 32-bits, in which case a 2/1 format is recommended.
+
+
+2) Note about "compatible" properties
+-------------------------------------
+
+These properties are optional, but recommended in devices and the root
+node. The format of a "compatible" property is a list of concatenated
+zero terminated strings. They allow a device to express its
+compatibility with a family of similar devices, in some cases,
+allowing a single driver to match against several devices regardless
+of their actual names.
+
+3) Note about "name" properties
+-------------------------------
+
+While earlier users of Open Firmware like OldWorld macintoshes tended
+to use the actual device name for the "name" property, it's nowadays
+considered a good practice to use a name that is closer to the device
+class (often equal to device_type). For example, nowadays, ethernet
+controllers are named "ethernet", an additional "model" property
+defining precisely the chip type/model, and "compatible" property
+defining the family in case a single driver can driver more than one
+of these chips. However, the kernel doesn't generally put any
+restriction on the "name" property; it is simply considered good
+practice to follow the standard and its evolutions as closely as
+possible.
+
+Note also that the new format version 16 makes the "name" property
+optional. If it's absent for a node, then the node's unit name is then
+used to reconstruct the name. That is, the part of the unit name
+before the "@" sign is used (or the entire unit name if no "@" sign
+is present).
+
+4) Note about node and property names and character set
+-------------------------------------------------------
+
+While open firmware provides more flexibe usage of 8859-1, this
+specification enforces more strict rules. Nodes and properties should
+be comprised only of ASCII characters 'a' to 'z', '0' to
+'9', ',', '.', '_', '+', '#', '?', and '-'. Node names additionally
+allow uppercase characters 'A' to 'Z' (property names should be
+lowercase. The fact that vendors like Apple don't respect this rule is
+irrelevant here). Additionally, node and property names should always
+begin with a character in the range 'a' to 'z' (or 'A' to 'Z' for node
+names).
+
+The maximum number of characters for both nodes and property names
+is 31. In the case of node names, this is only the leftmost part of
+a unit name (the pure "name" property), it doesn't include the unit
+address which can extend beyond that limit.
+
+
+5) Required nodes and properties
+--------------------------------
+ These are all that are currently required. However, it is strongly
+ recommended that you expose PCI host bridges as documented in the
+ PCI binding to open firmware, and your interrupt tree as documented
+ in OF interrupt tree specification.
+
+ a) The root node
+
+ The root node requires some properties to be present:
+
+ - model : this is your board name/model
+ - #address-cells : address representation for "root" devices
+ - #size-cells: the size representation for "root" devices
+
+ Additionally, some recommended properties are:
+
+ - compatible : the board "family" generally finds its way here,
+ for example, if you have 2 board models with a similar layout,
+ that typically get driven by the same platform code in the
+ kernel, you would use a different "model" property but put a
+ value in "compatible". The kernel doesn't directly use that
+ value (see /chosen/linux,platform for how the kernel choses a
+ platform type) but it is generally useful.
+
+ The root node is also generally where you add additional properties
+ specific to your board like the serial number if any, that sort of
+ thing. it is recommended that if you add any "custom" property whose
+ name may clash with standard defined ones, you prefix them with your
+ vendor name and a comma.
+
+ b) The /cpus node
+
+ This node is the parent of all individual CPU nodes. It doesn't
+ have any specific requirements, though it's generally good practice
+ to have at least:
+
+ #address-cells = <00000001>
+ #size-cells = <00000000>
+
+ This defines that the "address" for a CPU is a single cell, and has
+ no meaningful size. This is not necessary but the kernel will assume
+ that format when reading the "reg" properties of a CPU node, see
+ below
+
+ c) The /cpus/* nodes
+
+ So under /cpus, you are supposed to create a node for every CPU on
+ the machine. There is no specific restriction on the name of the
+ CPU, though It's common practice to call it PowerPC,<name>. For
+ example, Apple uses PowerPC,G5 while IBM uses PowerPC,970FX.
+
+ Required properties:
+
+ - device_type : has to be "cpu"
+ - reg : This is the physical cpu number, it's a single 32 bit cell
+ and is also used as-is as the unit number for constructing the
+ unit name in the full path. For example, with 2 CPUs, you would
+ have the full path:
+ /cpus/PowerPC,970FX@0
+ /cpus/PowerPC,970FX@1
+ (unit addresses do not require leading zeroes)
+ - d-cache-line-size : one cell, L1 data cache line size in bytes
+ - i-cache-line-size : one cell, L1 instruction cache line size in
+ bytes
+ - d-cache-size : one cell, size of L1 data cache in bytes
+ - i-cache-size : one cell, size of L1 instruction cache in bytes
+ - linux, boot-cpu : Should be defined if this cpu is the boot cpu.
+
+ Recommended properties:
+
+ - timebase-frequency : a cell indicating the frequency of the
+ timebase in Hz. This is not directly used by the generic code,
+ but you are welcome to copy/paste the pSeries code for setting
+ the kernel timebase/decrementer calibration based on this
+ value.
+ - clock-frequency : a cell indicating the CPU core clock frequency
+ in Hz. A new property will be defined for 64 bit values, but if
+ your frequency is < 4Ghz, one cell is enough. Here as well as
+ for the above, the common code doesn't use that property, but
+ you are welcome to re-use the pSeries or Maple one. A future
+ kernel version might provide a common function for this.
+
+ You are welcome to add any property you find relevant to your board,
+ like some information about the mechanism used to soft-reset the
+ CPUs. For example, Apple puts the GPIO number for CPU soft reset
+ lines in there as a "soft-reset" property since they start secondary
+ CPUs by soft-resetting them.
+
+
+ d) the /memory node(s)
+
+ To define the physical memory layout of your board, you should
+ create one or more memory node(s). You can either create a single
+ node with all memory ranges in its reg property, or you can create
+ several nodes, as you wish. The unit address (@ part) used for the
+ full path is the address of the first range of memory defined by a
+ given node. If you use a single memory node, this will typically be
+ @0.
+
+ Required properties:
+
+ - device_type : has to be "memory"
+ - reg : This property contains all the physical memory ranges of
+ your board. It's a list of addresses/sizes concatenated
+ together, with the number of cells of each defined by the
+ #address-cells and #size-cells of the root node. For example,
+ with both of these properties beeing 2 like in the example given
+ earlier, a 970 based machine with 6Gb of RAM could typically
+ have a "reg" property here that looks like:
+
+ 00000000 00000000 00000000 80000000
+ 00000001 00000000 00000001 00000000
+
+ That is a range starting at 0 of 0x80000000 bytes and a range
+ starting at 0x100000000 and of 0x100000000 bytes. You can see
+ that there is no memory covering the IO hole between 2Gb and
+ 4Gb. Some vendors prefer splitting those ranges into smaller
+ segments, but the kernel doesn't care.
+
+ e) The /chosen node
+
+ This node is a bit "special". Normally, that's where open firmware
+ puts some variable environment information, like the arguments, or
+ phandle pointers to nodes like the main interrupt controller, or the
+ default input/output devices.
+
+ This specification makes a few of these mandatory, but also defines
+ some linux-specific properties that would be normally constructed by
+ the prom_init() trampoline when booting with an OF client interface,
+ but that you have to provide yourself when using the flattened format.
+
+ Required properties:
+
+ - linux,platform : This is your platform number as assigned by the
+ architecture maintainers
+
+ Recommended properties:
+
+ - bootargs : This zero-terminated string is passed as the kernel
+ command line
+ - linux,stdout-path : This is the full path to your standard
+ console device if any. Typically, if you have serial devices on
+ your board, you may want to put the full path to the one set as
+ the default console in the firmware here, for the kernel to pick
+ it up as it's own default console. If you look at the funciton
+ set_preferred_console() in arch/ppc64/kernel/setup.c, you'll see
+ that the kernel tries to find out the default console and has
+ knowledge of various types like 8250 serial ports. You may want
+ to extend this function to add your own.
+ - interrupt-controller : This is one cell containing a phandle
+ value that matches the "linux,phandle" property of your main
+ interrupt controller node. May be used for interrupt routing.
+
+
+ Note that u-boot creates and fills in the chosen node for platforms
+ that use it.
+
+ f) the /soc<SOCname> node
+
+ This node is used to represent a system-on-a-chip (SOC) and must be
+ present if the processor is a SOC. The top-level soc node contains
+ information that is global to all devices on the SOC. The node name
+ should contain a unit address for the SOC, which is the base address
+ of the memory-mapped register set for the SOC. The name of an soc
+ node should start with "soc", and the remainder of the name should
+ represent the part number for the soc. For example, the MPC8540's
+ soc node would be called "soc8540".
+
+ Required properties:
+
+ - device_type : Should be "soc"
+ - ranges : Should be defined as specified in 1) to describe the
+ translation of SOC addresses for memory mapped SOC registers.
+ - bus-frequency: Contains the bus frequency for the SOC node.
+ Typically, the value of this field is filled in by the boot
+ loader.
+
+
+ Recommended properties:
+
+ - reg : This property defines the address and size of the
+ memory-mapped registers that are used for the SOC node itself.
+ It does not include the child device registers - these will be
+ defined inside each child node. The address specified in the
+ "reg" property should match the unit address of the SOC node.
+ - #address-cells : Address representation for "soc" devices. The
+ format of this field may vary depending on whether or not the
+ device registers are memory mapped. For memory mapped
+ registers, this field represents the number of cells needed to
+ represent the address of the registers. For SOCs that do not
+ use MMIO, a special address format should be defined that
+ contains enough cells to represent the required information.
+ See 1) above for more details on defining #address-cells.
+ - #size-cells : Size representation for "soc" devices
+ - #interrupt-cells : Defines the width of cells used to represent
+ interrupts. Typically this value is <2>, which includes a
+ 32-bit number that represents the interrupt number, and a
+ 32-bit number that represents the interrupt sense and level.
+ This field is only needed if the SOC contains an interrupt
+ controller.
+
+ The SOC node may contain child nodes for each SOC device that the
+ platform uses. Nodes should not be created for devices which exist
+ on the SOC but are not used by a particular platform. See chapter VI
+ for more information on how to specify devices that are part of an
+SOC.
+
+ Example SOC node for the MPC8540:
+
+ soc8540@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <00000000 e0000000 00100000>
+ reg = <e0000000 00003000>;
+ bus-frequency = <0>;
+ }
+
+
+
+IV - "dtc", the device tree compiler
+====================================
+
+
+dtc source code can be found at
+<http://ozlabs.org/~dgibson/dtc/dtc.tar.gz>
+
+WARNING: This version is still in early development stage; the
+resulting device-tree "blobs" have not yet been validated with the
+kernel. The current generated bloc lacks a useful reserve map (it will
+be fixed to generate an empty one, it's up to the bootloader to fill
+it up) among others. The error handling needs work, bugs are lurking,
+etc...
+
+dtc basically takes a device-tree in a given format and outputs a
+device-tree in another format. The currently supported formats are:
+
+ Input formats:
+ -------------
+
+ - "dtb": "blob" format, that is a flattened device-tree block
+ with
+ header all in a binary blob.
+ - "dts": "source" format. This is a text file containing a
+ "source" for a device-tree. The format is defined later in this
+ chapter.
+ - "fs" format. This is a representation equivalent to the
+ output of /proc/device-tree, that is nodes are directories and
+ properties are files
+
+ Output formats:
+ ---------------
+
+ - "dtb": "blob" format
+ - "dts": "source" format
+ - "asm": assembly language file. This is a file that can be
+ sourced by gas to generate a device-tree "blob". That file can
+ then simply be added to your Makefile. Additionally, the
+ assembly file exports some symbols that can be use
+
+
+The syntax of the dtc tool is
+
+ dtc [-I <input-format>] [-O <output-format>]
+ [-o output-filename] [-V output_version] input_filename
+
+
+The "output_version" defines what versio of the "blob" format will be
+generated. Supported versions are 1,2,3 and 16. The default is
+currently version 3 but that may change in the future to version 16.
+
+Additionally, dtc performs various sanity checks on the tree, like the
+uniqueness of linux,phandle properties, validity of strings, etc...
+
+The format of the .dts "source" file is "C" like, supports C and C++
+style commments.
+
+/ {
+}
+
+The above is the "device-tree" definition. It's the only statement
+supported currently at the toplevel.
+
+/ {
+ property1 = "string_value"; /* define a property containing a 0
+ * terminated string
+ */
+
+ property2 = <1234abcd>; /* define a property containing a
+ * numerical 32 bits value (hexadecimal)
+ */
+
+ property3 = <12345678 12345678 deadbeef>;
+ /* define a property containing 3
+ * numerical 32 bits values (cells) in
+ * hexadecimal
+ */
+ property4 = [0a 0b 0c 0d de ea ad be ef];
+ /* define a property whose content is
+ * an arbitrary array of bytes
+ */
+
+ childnode@addresss { /* define a child node named "childnode"
+ * whose unit name is "childnode at
+ * address"
+ */
+
+ childprop = "hello\n"; /* define a property "childprop" of
+ * childnode (in this case, a string)
+ */
+ };
+};
+
+Nodes can contain other nodes etc... thus defining the hierarchical
+structure of the tree.
+
+Strings support common escape sequences from C: "\n", "\t", "\r",
+"\(octal value)", "\x(hex value)".
+
+It is also suggested that you pipe your source file through cpp (gcc
+preprocessor) so you can use #include's, #define for constants, etc...
+
+Finally, various options are planned but not yet implemented, like
+automatic generation of phandles, labels (exported to the asm file so
+you can point to a property content and change it easily from whatever
+you link the device-tree with), label or path instead of numeric value
+in some cells to "point" to a node (replaced by a phandle at compile
+time), export of reserve map address to the asm file, ability to
+specify reserve map content at compile time, etc...
+
+We may provide a .h include file with common definitions of that
+proves useful for some properties (like building PCI properties or
+interrupt maps) though it may be better to add a notion of struct
+definitions to the compiler...
+
+
+V - Recommendations for a bootloader
+====================================
+
+
+Here are some various ideas/recommendations that have been proposed
+while all this has been defined and implemented.
+
+ - The bootloader may want to be able to use the device-tree itself
+ and may want to manipulate it (to add/edit some properties,
+ like physical memory size or kernel arguments). At this point, 2
+ choices can be made. Either the bootloader works directly on the
+ flattened format, or the bootloader has its own internal tree
+ representation with pointers (similar to the kernel one) and
+ re-flattens the tree when booting the kernel. The former is a bit
+ more difficult to edit/modify, the later requires probably a bit
+ more code to handle the tree structure. Note that the structure
+ format has been designed so it's relatively easy to "insert"
+ properties or nodes or delete them by just memmoving things
+ around. It contains no internal offsets or pointers for this
+ purpose.
+
+ - An example of code for iterating nodes & retreiving properties
+ directly from the flattened tree format can be found in the kernel
+ file arch/ppc64/kernel/prom.c, look at scan_flat_dt() function,
+ it's usage in early_init_devtree(), and the corresponding various
+ early_init_dt_scan_*() callbacks. That code can be re-used in a
+ GPL bootloader, and as the author of that code, I would be happy
+ do discuss possible free licencing to any vendor who wishes to
+ integrate all or part of this code into a non-GPL bootloader.
+
+
+
+VI - System-on-a-chip devices and nodes
+=======================================
+
+Many companies are now starting to develop system-on-a-chip
+processors, where the processor core (cpu) and many peripheral devices
+exist on a single piece of silicon. For these SOCs, an SOC node
+should be used that defines child nodes for the devices that make
+up the SOC. While platforms are not required to use this model in
+order to boot the kernel, it is highly encouraged that all SOC
+implementations define as complete a flat-device-tree as possible to
+describe the devices on the SOC. This will allow for the
+genericization of much of the kernel code.
+
+
+1) Defining child nodes of an SOC
+---------------------------------
+
+Each device that is part of an SOC may have its own node entry inside
+the SOC node. For each device that is included in the SOC, the unit
+address property represents the address offset for this device's
+memory-mapped registers in the parent's address space. The parent's
+address space is defined by the "ranges" property in the top-level soc
+node. The "reg" property for each node that exists directly under the
+SOC node should contain the address mapping from the child address space
+to the parent SOC address space and the size of the device's
+memory-mapped register file.
+
+For many devices that may exist inside an SOC, there are predefined
+specifications for the format of the device tree node. All SOC child
+nodes should follow these specifications, except where noted in this
+document.
+
+See appendix A for an example partial SOC node definition for the
+MPC8540.
+
+
+2) Specifying interrupt information for SOC devices
+---------------------------------------------------
+
+Each device that is part of an SOC and which generates interrupts
+should have the following properties:
+
+ - interrupt-parent : contains the phandle of the interrupt
+ controller which handles interrupts for this device
+ - interrupts : a list of tuples representing the interrupt
+ number and the interrupt sense and level for each interupt
+ for this device.
+
+This information is used by the kernel to build the interrupt table
+for the interrupt controllers in the system.
+
+Sense and level information should be encoded as follows:
+
+ Devices connected to openPIC-compatible controllers should encode
+ sense and polarity as follows:
+
+ 0 = high to low edge sensitive type enabled
+ 1 = active low level sensitive type enabled
+ 2 = low to high edge sensitive type enabled
+ 3 = active high level sensitive type enabled
+
+ ISA PIC interrupt controllers should adhere to the ISA PIC
+ encodings listed below:
+
+ 0 = active low level sensitive type enabled
+ 1 = active high level sensitive type enabled
+ 2 = high to low edge sensitive type enabled
+ 3 = low to high edge sensitive type enabled
+
+
+
+3) Representing devices without a current OF specification
+----------------------------------------------------------
+
+Currently, there are many devices on SOCs that do not have a standard
+representation pre-defined as part of the open firmware
+specifications, mainly because the boards that contain these SOCs are
+not currently booted using open firmware. This section contains
+descriptions for the SOC devices for which new nodes have been
+defined; this list will expand as more and more SOC-containing
+platforms are moved over to use the flattened-device-tree model.
+
+ a) MDIO IO device
+
+ The MDIO is a bus to which the PHY devices are connected. For each
+ device that exists on this bus, a child node should be created. See
+ the definition of the PHY node below for an example of how to define
+ a PHY.
+
+ Required properties:
+ - reg : Offset and length of the register set for the device
+ - device_type : Should be "mdio"
+ - compatible : Should define the compatible device type for the
+ mdio. Currently, this is most likely to be "gianfar"
+
+ Example:
+
+ mdio@24520 {
+ reg = <24520 20>;
+ device_type = "mdio";
+ compatible = "gianfar";
+
+ ethernet-phy@0 {
+ ......
+ };
+ };
+
+
+ b) Gianfar-compatible ethernet nodes
+
+ Required properties:
+
+ - device_type : Should be "network"
+ - model : Model of the device. Can be "TSEC", "eTSEC", or "FEC"
+ - compatible : Should be "gianfar"
+ - reg : Offset and length of the register set for the device
+ - address : List of bytes representing the ethernet address of
+ this controller
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - phy-handle : The phandle for the PHY connected to this ethernet
+ controller.
+
+ Example:
+
+ ethernet@24000 {
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <d 3 e 3 12 3>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>
+ };
+
+
+
+ c) PHY nodes
+
+ Required properties:
+
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+ - linux,phandle : phandle for this node; likely referenced by an
+ ethernet controller node.
+
+
+ Example:
+
+ ethernet-phy@0 {
+ linux,phandle = <2452000>
+ interrupt-parent = <40000>;
+ interrupts = <35 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+
+
+ d) Interrupt controllers
+
+ Some SOC devices contain interrupt controllers that are different
+ from the standard Open PIC specification. The SOC device nodes for
+ these types of controllers should be specified just like a standard
+ OpenPIC controller. Sense and level information should be encoded
+ as specified in section 2) of this chapter for each device that
+ specifies an interrupt.
+
+ Example :
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+
+
+ e) I2C
+
+ Required properties :
+
+ - device_type : Should be "i2c"
+ - reg : Offset and length of the register set for the device
+
+ Recommended properties :
+
+ - compatible : Should be "fsl-i2c" for parts compatible with
+ Freescale I2C specifications.
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - dfsrr : boolean; if defined, indicates that this I2C device has
+ a digital filter sampling rate register
+ - fsl5200-clocking : boolean; if defined, indicated that this device
+ uses the FSL 5200 clocking mechanism.
+
+ Example :
+
+ i2c@3000 {
+ interrupt-parent = <40000>;
+ interrupts = <1b 3>;
+ reg = <3000 18>;
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ dfsrr;
+ };
+
+
+ More devices will be defined as this spec matures.
+
+
+Appendix A - Sample SOC node for MPC8540
+========================================
+
+Note that the #address-cells and #size-cells for the SoC node
+in this example have been explicitly listed; these are likely
+not necessary as they are usually the same as the root node.
+
+ soc8540@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <00000000 e0000000 00100000>
+ reg = <e0000000 00003000>;
+ bus-frequency = <0>;
+
+ mdio@24520 {
+ reg = <24520 20>;
+ device_type = "mdio";
+ compatible = "gianfar";
+
+ ethernet-phy@0 {
+ linux,phandle = <2452000>
+ interrupt-parent = <40000>;
+ interrupts = <35 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+
+ ethernet-phy@1 {
+ linux,phandle = <2452001>
+ interrupt-parent = <40000>;
+ interrupts = <35 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+
+ ethernet-phy@3 {
+ linux,phandle = <2452002>
+ interrupt-parent = <40000>;
+ interrupts = <35 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+
+ };
+
+ ethernet@24000 {
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <d 3 e 3 12 3>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <13 3 14 3 18 3>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+ ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "FEC";
+ compatible = "gianfar";
+ reg = <26000 1000>;
+ address = [ 00 E0 0C 00 73 02 ];
+ interrupts = <19 3>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452002>;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>;
+ clock-frequency = <0>;
+ interrupts = <1a 3>;
+ interrupt-parent = <40000>;
+ };
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+
+ i2c@3000 {
+ interrupt-parent = <40000>;
+ interrupts = <1b 3>;
+ reg = <3000 18>;
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ dfsrr;
+ };
+
+ };
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
new file mode 100644
index 0000000..f8c16cb
--- /dev/null
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -0,0 +1,24 @@
+1 Release Date : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
+2 Current Version : 00.00.02.02
+3 Older Version : 00.00.02.01
+
+i. New template defined to represent each family of controllers (identified by processor used).
+ The template will have defintions that will be initialised to appropritae values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set.
+
+ -Sumant Patro <Sumant.Patro@lsil.com>
+
+1 Release Date : Mon Dec 19 14:36:26 PST 2005 - Sumant Patro <Sumant.Patro@lsil.com>
+2 Current Version : 00.00.02.00-rc4
+3 Older Version : 00.00.02.01
+
+i. Code reorganized to remove code duplication in megasas_build_cmd.
+
+ "There's a lot of duplicate code megasas_build_cmd. Move that out of the different codepathes and merge the reminder of megasas_build_cmd into megasas_queue_command"
+
+ - Christoph Hellwig <hch@lst.de>
+
+ii. Defined MEGASAS_IOC_FIRMWARE32 for code paths that handles 32 bit applications in 64 bit systems.
+
+ "MEGASAS_IOC_FIRMWARE can't be redefined if CONFIG_COMPAT is set, we need to define a MEGASAS_IOC_FIRMWARE32 define so native binaries continue to work"
+
+ - Christoph Hellwig <hch@lst.de>
diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt
index 0aeef74..382b439 100644
--- a/Documentation/scsi/aic79xx.txt
+++ b/Documentation/scsi/aic79xx.txt
@@ -1,5 +1,5 @@
====================================================================
-= Adaptec Ultra320 Family Manager Set v1.3.11 =
+= Adaptec Ultra320 Family Manager Set =
= =
= README for =
= The Linux Operating System =
@@ -63,6 +63,11 @@
68-pin)
2. Version History
+ 3.0 (December 1st, 2005)
+ - Updated driver to use SCSI transport class infrastructure
+ - Upported sequencer and core fixes from adaptec released
+ version 2.0.15 of the driver.
+
1.3.11 (July 11, 2003)
- Fix several deadlock issues.
- Add 29320ALP and 39320B Id's.
@@ -194,7 +199,7 @@
supported)
- Support for the PCI-X standard up to 133MHz
- Support for the PCI v2.2 standard
- - Domain Validation
+ - Domain Validation
2.2. Operating System Support:
- Redhat Linux 7.2, 7.3, 8.0, Advanced Server 2.1
@@ -411,77 +416,53 @@
http://www.adaptec.com.
-5. Contacting Adaptec
+5. Adaptec Customer Support
A Technical Support Identification (TSID) Number is required for
Adaptec technical support.
- The 12-digit TSID can be found on the white barcode-type label
- included inside the box with your product. The TSID helps us
+ included inside the box with your product. The TSID helps us
provide more efficient service by accurately identifying your
product and support status.
+
Support Options
- Search the Adaptec Support Knowledgebase (ASK) at
http://ask.adaptec.com for articles, troubleshooting tips, and
- frequently asked questions for your product.
+ frequently asked questions about your product.
- For support via Email, submit your question to Adaptec's
- Technical Support Specialists at http://ask.adaptec.com.
+ Technical Support Specialists at http://ask.adaptec.com/.
North America
- - Visit our Web site at http://www.adaptec.com.
- - To speak with a Fibre Channel/RAID/External Storage Technical
- Support Specialist, call 1-321-207-2000,
- Hours: Monday-Friday, 3:00 A.M. to 5:00 P.M., PST.
- (Not open on holidays)
- - For Technical Support in all other technologies including
- SCSI, call 1-408-934-7274,
- Hours: Monday-Friday, 6:00 A.M. to 5:00 P.M., PST.
- (Not open on holidays)
- - For after hours support, call 1-800-416-8066 ($99/call,
- $149/call on holidays)
- - To order Adaptec products including software and cables, call
- 1-800-442-7274 or 1-408-957-7274. You can also visit our
- online store at http://www.adaptecstore.com
+ - Visit our Web site at http://www.adaptec.com/.
+ - For information about Adaptec's support options, call
+ 408-957-2550, 24 hours a day, 7 days a week.
+ - To speak with a Technical Support Specialist,
+ * For hardware products, call 408-934-7274,
+ Monday to Friday, 3:00 am to 5:00 pm, PDT.
+ * For RAID and Fibre Channel products, call 321-207-2000,
+ Monday to Friday, 3:00 am to 5:00 pm, PDT.
+ To expedite your service, have your computer with you.
+ - To order Adaptec products, including accessories and cables,
+ call 408-957-7274. To order cables online go to
+ http://www.adaptec.com/buy-cables/.
Europe
- - Visit our Web site at http://www.adaptec-europe.com.
- - English and French: To speak with a Technical Support
- Specialist, call one of the following numbers:
- - English: +32-2-352-3470
- - French: +32-2-352-3460
- Hours: Monday-Thursday, 10:00 to 12:30, 13:30 to 17:30 CET
- Friday, 10:00 to 12:30, 13:30 to 16:30 CET
- - German: To speak with a Technical Support Specialist,
- call +49-89-456-40660
- Hours: Monday-Thursday, 09:30 to 12:30, 13:30 to 16:30 CET
- Friday, 09:30 to 12:30, 13:30 to 15:00 CET
- - To order Adaptec products, including accessories and cables:
- - UK: +0800-96-65-26 or fax +0800-731-02-95
- - Other European countries: +32-11-300-379
-
- Australia and New Zealand
- - Visit our Web site at http://www.adaptec.com.au.
- - To speak with a Technical Support Specialist, call
- +612-9416-0698
- Hours: Monday-Friday, 10:00 A.M. to 4:30 P.M., EAT
- (Not open on holidays)
+ - Visit our Web site at http://www.adaptec-europe.com/.
+ - To speak with a Technical Support Specialist, call, or email,
+ * German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
+ http://ask-de.adaptec.com/.
+ * French: +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET,
+ http://ask-fr.adaptec.com/.
+ * English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT,
+ http://ask.adaptec.com/.
+ - You can order Adaptec cables online at
+ http://www.adaptec.com/buy-cables/.
Japan
+ - Visit our web site at http://www.adaptec.co.jp/.
- To speak with a Technical Support Specialist, call
- +81-3-5308-6120
- Hours: Monday-Friday, 9:00 a.m. to 12:00 p.m., 1:00 p.m. to
- 6:00 p.m. TSC
-
- Hong Kong and China
- - To speak with a Technical Support Specialist, call
- +852-2869-7200
- Hours: Monday-Friday, 10:00 to 17:00.
- - Fax Technical Support at +852-2869-7100.
-
- Singapore
- - To speak with a Technical Support Specialist, call
- +65-245-7470
- Hours: Monday-Friday, 10:00 to 17:00.
- - Fax Technical Support at +852-2869-7100
+ +81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m.,
+ 1:00 p.m. to 6:00 p.m.
-------------------------------------------------------------------
/*
diff --git a/Documentation/scsi/aic7xxx.txt b/Documentation/scsi/aic7xxx.txt
index 47e74dd..3481fcd 100644
--- a/Documentation/scsi/aic7xxx.txt
+++ b/Documentation/scsi/aic7xxx.txt
@@ -309,81 +309,57 @@
-----------------------------------------------------------------
Example:
- 'options aic7xxx aic7xxx=verbose,no_probe,tag_info:{{},{,,10}},seltime:1"
+ 'options aic7xxx aic7xxx=verbose,no_probe,tag_info:{{},{,,10}},seltime:1'
enables verbose logging, Disable EISA/VLB probing,
and set tag depth on Controller 1/Target 2 to 10 tags.
-3. Contacting Adaptec
+4. Adaptec Customer Support
A Technical Support Identification (TSID) Number is required for
Adaptec technical support.
- The 12-digit TSID can be found on the white barcode-type label
- included inside the box with your product. The TSID helps us
+ included inside the box with your product. The TSID helps us
provide more efficient service by accurately identifying your
product and support status.
+
Support Options
- Search the Adaptec Support Knowledgebase (ASK) at
http://ask.adaptec.com for articles, troubleshooting tips, and
- frequently asked questions for your product.
+ frequently asked questions about your product.
- For support via Email, submit your question to Adaptec's
- Technical Support Specialists at http://ask.adaptec.com.
+ Technical Support Specialists at http://ask.adaptec.com/.
North America
- - Visit our Web site at http://www.adaptec.com.
- - To speak with a Fibre Channel/RAID/External Storage Technical
- Support Specialist, call 1-321-207-2000,
- Hours: Monday-Friday, 3:00 A.M. to 5:00 P.M., PST.
- (Not open on holidays)
- - For Technical Support in all other technologies including
- SCSI, call 1-408-934-7274,
- Hours: Monday-Friday, 6:00 A.M. to 5:00 P.M., PST.
- (Not open on holidays)
- - For after hours support, call 1-800-416-8066 ($99/call,
- $149/call on holidays)
- - To order Adaptec products including software and cables, call
- 1-800-442-7274 or 1-408-957-7274. You can also visit our
- online store at http://www.adaptecstore.com
+ - Visit our Web site at http://www.adaptec.com/.
+ - For information about Adaptec's support options, call
+ 408-957-2550, 24 hours a day, 7 days a week.
+ - To speak with a Technical Support Specialist,
+ * For hardware products, call 408-934-7274,
+ Monday to Friday, 3:00 am to 5:00 pm, PDT.
+ * For RAID and Fibre Channel products, call 321-207-2000,
+ Monday to Friday, 3:00 am to 5:00 pm, PDT.
+ To expedite your service, have your computer with you.
+ - To order Adaptec products, including accessories and cables,
+ call 408-957-7274. To order cables online go to
+ http://www.adaptec.com/buy-cables/.
Europe
- - Visit our Web site at http://www.adaptec-europe.com.
- - English and French: To speak with a Technical Support
- Specialist, call one of the following numbers:
- - English: +32-2-352-3470
- - French: +32-2-352-3460
- Hours: Monday-Thursday, 10:00 to 12:30, 13:30 to 17:30 CET
- Friday, 10:00 to 12:30, 13:30 to 16:30 CET
- - German: To speak with a Technical Support Specialist,
- call +49-89-456-40660
- Hours: Monday-Thursday, 09:30 to 12:30, 13:30 to 16:30 CET
- Friday, 09:30 to 12:30, 13:30 to 15:00 CET
- - To order Adaptec products, including accessories and cables:
- - UK: +0800-96-65-26 or fax +0800-731-02-95
- - Other European countries: +32-11-300-379
-
- Australia and New Zealand
- - Visit our Web site at http://www.adaptec.com.au.
- - To speak with a Technical Support Specialist, call
- +612-9416-0698
- Hours: Monday-Friday, 10:00 A.M. to 4:30 P.M., EAT
- (Not open on holidays)
+ - Visit our Web site at http://www.adaptec-europe.com/.
+ - To speak with a Technical Support Specialist, call, or email,
+ * German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
+ http://ask-de.adaptec.com/.
+ * French: +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET,
+ http://ask-fr.adaptec.com/.
+ * English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT,
+ http://ask.adaptec.com/.
+ - You can order Adaptec cables online at
+ http://www.adaptec.com/buy-cables/.
Japan
+ - Visit our web site at http://www.adaptec.co.jp/.
- To speak with a Technical Support Specialist, call
- +81-3-5308-6120
- Hours: Monday-Friday, 9:00 a.m. to 12:00 p.m., 1:00 p.m. to
- 6:00 p.m. TSC
-
- Hong Kong and China
- - To speak with a Technical Support Specialist, call
- +852-2869-7200
- Hours: Monday-Friday, 10:00 to 17:00.
- - Fax Technical Support at +852-2869-7100.
-
- Singapore
- - To speak with a Technical Support Specialist, call
- +65-245-7470
- Hours: Monday-Friday, 10:00 to 17:00.
- - Fax Technical Support at +852-2869-7100
+ +81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m.,
+ 1:00 p.m. to 6:00 p.m.
-------------------------------------------------------------------
/*
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index d257801..36b511c 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -837,8 +837,10 @@
Module for AC'97 motherboards from Intel and compatibles.
* Intel i810/810E, i815, i820, i830, i84x, MX440
+ ICH5, ICH6, ICH7, ESB2
* SiS 7012 (SiS 735)
- * NVidia NForce, NForce2
+ * NVidia NForce, NForce2, NForce3, MCP04, CK804
+ CK8, CK8S, MCP501
* AMD AMD768, AMD8111
* ALi m5455
@@ -868,6 +870,12 @@
--------------------
Module for Intel ICH (i8x0) chipset MC97 modems.
+ * Intel i810/810E, i815, i820, i830, i84x, MX440
+ ICH5, ICH6, ICH7
+ * SiS 7013 (SiS 735)
+ * NVidia NForce, NForce2, NForce2s, NForce3
+ * AMD AMD8111
+ * ALi m5455
ac97_clock - AC'97 codec clock base (0 = auto-detect)
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index e651ed8..4251085 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -5206,14 +5206,14 @@
You need to pass the <function>snd_dma_pci_data(pci)</function>,
where pci is the struct <structname>pci_dev</structname> pointer
of the chip as well.
- The <type>snd_sg_buf_t</type> instance is created as
+ The <type>struct snd_sg_buf</type> instance is created as
substream->dma_private. You can cast
the pointer like:
<informalexample>
<programlisting>
<![CDATA[
- struct snd_sg_buf *sgbuf = (struct snd_sg_buf_t*)substream->dma_private;
+ struct snd_sg_buf *sgbuf = (struct snd_sg_buf *)substream->dma_private;
]]>
</programlisting>
</informalexample>
diff --git a/Documentation/spi/butterfly b/Documentation/spi/butterfly
index a2e8c8d..9927af7a 100644
--- a/Documentation/spi/butterfly
+++ b/Documentation/spi/butterfly
@@ -12,13 +12,20 @@
directly to the Butterfly. Or (if you have the parts and skills) you
can come up with something fancier, providing ciruit protection to the
Butterfly and the printer port, or with a better power supply than two
-signal pins from the printer port.
+signal pins from the printer port. Or for that matter, you can use
+similar cables to talk to many AVR boards, even a breadboard.
+
+This is more powerful than "ISP programming" cables since it lets kernel
+SPI protocol drivers interact with the AVR, and could even let the AVR
+issue interrupts to them. Later, your protocol driver should work
+easily with a "real SPI controller", instead of this bitbanger.
The first cable connections will hook Linux up to one SPI bus, with the
AVR and a DataFlash chip; and to the AVR reset line. This is all you
need to reflash the firmware, and the pins are the standard Atmel "ISP"
-connector pins (used also on non-Butterfly AVR boards).
+connector pins (used also on non-Butterfly AVR boards). On the parport
+side this is like "sp12" programming cables.
Signal Butterfly Parport (DB-25)
------ --------- ---------------
@@ -40,10 +47,14 @@
SELECT = J400.PB0/nSS = pin 17/C3,nSELECT
GND = J400.GND = pin 24/GND
-The "USI" controller, using J405, can be used for a second SPI bus. That
-would let you talk to the AVR over SPI, running firmware that makes it act
-as an SPI slave, while letting either Linux or the AVR use the DataFlash.
-There are plenty of spare parport pins to wire this one up, such as:
+Or you could flash firmware making the AVR into an SPI slave (keeping the
+DataFlash in reset) and tweak the spi_butterfly driver to make it bind to
+the driver for your custom SPI-based protocol.
+
+The "USI" controller, using J405, can also be used for a second SPI bus.
+That would let you talk to the AVR using custom SPI-with-USI firmware,
+while letting either Linux or the AVR use the DataFlash. There are plenty
+of spare parport pins to wire this one up, such as:
Signal Butterfly Parport (DB-25)
------ --------- ---------------
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 391dd64..a46c10f 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -28,6 +28,7 @@
- block_dump
- drop-caches
- zone_reclaim_mode
+- zone_reclaim_interval
==============================================================
@@ -126,15 +127,54 @@
zone_reclaim_mode:
-This is set during bootup to 1 if it is determined that pages from
-remote zones will cause a significant performance reduction. The
+Zone_reclaim_mode allows to set more or less agressive approaches to
+reclaim memory when a zone runs out of memory. If it is set to zero then no
+zone reclaim occurs. Allocations will be satisfied from other zones / nodes
+in the system.
+
+This is value ORed together of
+
+1 = Zone reclaim on
+2 = Zone reclaim writes dirty pages out
+4 = Zone reclaim swaps pages
+8 = Also do a global slab reclaim pass
+
+zone_reclaim_mode is set during bootup to 1 if it is determined that pages
+from remote zones will cause a measurable performance reduction. The
page allocator will then reclaim easily reusable pages (those page
-cache pages that are currently not used) before going off node.
+cache pages that are currently not used) before allocating off node pages.
-The user can override this setting. It may be beneficial to switch
-off zone reclaim if the system is used for a file server and all
-of memory should be used for caching files from disk.
+It may be beneficial to switch off zone reclaim if the system is
+used for a file server and all of memory should be used for caching files
+from disk. In that case the caching effect is more important than
+data locality.
-It may be beneficial to switch this on if one wants to do zone
-reclaim regardless of the numa distances in the system.
+Allowing zone reclaim to write out pages stops processes that are
+writing large amounts of data from dirtying pages on other nodes. Zone
+reclaim will write out dirty pages if a zone fills up and so effectively
+throttle the process. This may decrease the performance of a single process
+since it cannot use all of system memory to buffer the outgoing writes
+anymore but it preserve the memory on other nodes so that the performance
+of other processes running on other nodes will not be affected.
+
+Allowing regular swap effectively restricts allocations to the local
+node unless explicitly overridden by memory policies or cpuset
+configurations.
+
+It may be advisable to allow slab reclaim if the system makes heavy
+use of files and builds up large slab caches. However, the slab
+shrink operation is global, may take a long time and free slabs
+in all nodes of the system.
+
+================================================================
+
+zone_reclaim_interval:
+
+The time allowed for off node allocations after zone reclaim
+has failed to reclaim enough pages to allow a local allocation.
+
+Time is set in seconds and set by default to 30 seconds.
+
+Reduce the interval if undesired off node allocations occur. However, too
+frequent scans will have a negative impact onoff node allocation performance.
diff --git a/Documentation/unshare.txt b/Documentation/unshare.txt
new file mode 100644
index 0000000..90a5e9e
--- /dev/null
+++ b/Documentation/unshare.txt
@@ -0,0 +1,295 @@
+
+unshare system call:
+--------------------
+This document describes the new system call, unshare. The document
+provides an overview of the feature, why it is needed, how it can
+be used, its interface specification, design, implementation and
+how it can be tested.
+
+Change Log:
+-----------
+version 0.1 Initial document, Janak Desai (janak@us.ibm.com), Jan 11, 2006
+
+Contents:
+---------
+ 1) Overview
+ 2) Benefits
+ 3) Cost
+ 4) Requirements
+ 5) Functional Specification
+ 6) High Level Design
+ 7) Low Level Design
+ 8) Test Specification
+ 9) Future Work
+
+1) Overview
+-----------
+Most legacy operating system kernels support an abstraction of threads
+as multiple execution contexts within a process. These kernels provide
+special resources and mechanisms to maintain these "threads". The Linux
+kernel, in a clever and simple manner, does not make distinction
+between processes and "threads". The kernel allows processes to share
+resources and thus they can achieve legacy "threads" behavior without
+requiring additional data structures and mechanisms in the kernel. The
+power of implementing threads in this manner comes not only from
+its simplicity but also from allowing application programmers to work
+outside the confinement of all-or-nothing shared resources of legacy
+threads. On Linux, at the time of thread creation using the clone system
+call, applications can selectively choose which resources to share
+between threads.
+
+unshare system call adds a primitive to the Linux thread model that
+allows threads to selectively 'unshare' any resources that were being
+shared at the time of their creation. unshare was conceptualized by
+Al Viro in the August of 2000, on the Linux-Kernel mailing list, as part
+of the discussion on POSIX threads on Linux. unshare augments the
+usefulness of Linux threads for applications that would like to control
+shared resources without creating a new process. unshare is a natural
+addition to the set of available primitives on Linux that implement
+the concept of process/thread as a virtual machine.
+
+2) Benefits
+-----------
+unshare would be useful to large application frameworks such as PAM
+where creating a new process to control sharing/unsharing of process
+resources is not possible. Since namespaces are shared by default
+when creating a new process using fork or clone, unshare can benefit
+even non-threaded applications if they have a need to disassociate
+from default shared namespace. The following lists two use-cases
+where unshare can be used.
+
+2.1 Per-security context namespaces
+-----------------------------------
+unshare can be used to implement polyinstantiated directories using
+the kernel's per-process namespace mechanism. Polyinstantiated directories,
+such as per-user and/or per-security context instance of /tmp, /var/tmp or
+per-security context instance of a user's home directory, isolate user
+processes when working with these directories. Using unshare, a PAM
+module can easily setup a private namespace for a user at login.
+Polyinstantiated directories are required for Common Criteria certification
+with Labeled System Protection Profile, however, with the availability
+of shared-tree feature in the Linux kernel, even regular Linux systems
+can benefit from setting up private namespaces at login and
+polyinstantiating /tmp, /var/tmp and other directories deemed
+appropriate by system administrators.
+
+2.2 unsharing of virtual memory and/or open files
+-------------------------------------------------
+Consider a client/server application where the server is processing
+client requests by creating processes that share resources such as
+virtual memory and open files. Without unshare, the server has to
+decide what needs to be shared at the time of creating the process
+which services the request. unshare allows the server an ability to
+disassociate parts of the context during the servicing of the
+request. For large and complex middleware application frameworks, this
+ability to unshare after the process was created can be very
+useful.
+
+3) Cost
+-------
+In order to not duplicate code and to handle the fact that unshare
+works on an active task (as opposed to clone/fork working on a newly
+allocated inactive task) unshare had to make minor reorganizational
+changes to copy_* functions utilized by clone/fork system call.
+There is a cost associated with altering existing, well tested and
+stable code to implement a new feature that may not get exercised
+extensively in the beginning. However, with proper design and code
+review of the changes and creation of an unshare test for the LTP
+the benefits of this new feature can exceed its cost.
+
+4) Requirements
+---------------
+unshare reverses sharing that was done using clone(2) system call,
+so unshare should have a similar interface as clone(2). That is,
+since flags in clone(int flags, void *stack) specifies what should
+be shared, similar flags in unshare(int flags) should specify
+what should be unshared. Unfortunately, this may appear to invert
+the meaning of the flags from the way they are used in clone(2).
+However, there was no easy solution that was less confusing and that
+allowed incremental context unsharing in future without an ABI change.
+
+unshare interface should accommodate possible future addition of
+new context flags without requiring a rebuild of old applications.
+If and when new context flags are added, unshare design should allow
+incremental unsharing of those resources on an as needed basis.
+
+5) Functional Specification
+---------------------------
+NAME
+ unshare - disassociate parts of the process execution context
+
+SYNOPSIS
+ #include <sched.h>
+
+ int unshare(int flags);
+
+DESCRIPTION
+ unshare allows a process to disassociate parts of its execution
+ context that are currently being shared with other processes. Part
+ of execution context, such as the namespace, is shared by default
+ when a new process is created using fork(2), while other parts,
+ such as the virtual memory, open file descriptors, etc, may be
+ shared by explicit request to share them when creating a process
+ using clone(2).
+
+ The main use of unshare is to allow a process to control its
+ shared execution context without creating a new process.
+
+ The flags argument specifies one or bitwise-or'ed of several of
+ the following constants.
+
+ CLONE_FS
+ If CLONE_FS is set, file system information of the caller
+ is disassociated from the shared file system information.
+
+ CLONE_FILES
+ If CLONE_FILES is set, the file descriptor table of the
+ caller is disassociated from the shared file descriptor
+ table.
+
+ CLONE_NEWNS
+ If CLONE_NEWNS is set, the namespace of the caller is
+ disassociated from the shared namespace.
+
+ CLONE_VM
+ If CLONE_VM is set, the virtual memory of the caller is
+ disassociated from the shared virtual memory.
+
+RETURN VALUE
+ On success, zero returned. On failure, -1 is returned and errno is
+
+ERRORS
+ EPERM CLONE_NEWNS was specified by a non-root process (process
+ without CAP_SYS_ADMIN).
+
+ ENOMEM Cannot allocate sufficient memory to copy parts of caller's
+ context that need to be unshared.
+
+ EINVAL Invalid flag was specified as an argument.
+
+CONFORMING TO
+ The unshare() call is Linux-specific and should not be used
+ in programs intended to be portable.
+
+SEE ALSO
+ clone(2), fork(2)
+
+6) High Level Design
+--------------------
+Depending on the flags argument, the unshare system call allocates
+appropriate process context structures, populates it with values from
+the current shared version, associates newly duplicated structures
+with the current task structure and releases corresponding shared
+versions. Helper functions of clone (copy_*) could not be used
+directly by unshare because of the following two reasons.
+ 1) clone operates on a newly allocated not-yet-active task
+ structure, where as unshare operates on the current active
+ task. Therefore unshare has to take appropriate task_lock()
+ before associating newly duplicated context structures
+ 2) unshare has to allocate and duplicate all context structures
+ that are being unshared, before associating them with the
+ current task and releasing older shared structures. Failure
+ do so will create race conditions and/or oops when trying
+ to backout due to an error. Consider the case of unsharing
+ both virtual memory and namespace. After successfully unsharing
+ vm, if the system call encounters an error while allocating
+ new namespace structure, the error return code will have to
+ reverse the unsharing of vm. As part of the reversal the
+ system call will have to go back to older, shared, vm
+ structure, which may not exist anymore.
+
+Therefore code from copy_* functions that allocated and duplicated
+current context structure was moved into new dup_* functions. Now,
+copy_* functions call dup_* functions to allocate and duplicate
+appropriate context structures and then associate them with the
+task structure that is being constructed. unshare system call on
+the other hand performs the following:
+ 1) Check flags to force missing, but implied, flags
+ 2) For each context structure, call the corresponding unshare
+ helper function to allocate and duplicate a new context
+ structure, if the appropriate bit is set in the flags argument.
+ 3) If there is no error in allocation and duplication and there
+ are new context structures then lock the current task structure,
+ associate new context structures with the current task structure,
+ and release the lock on the current task structure.
+ 4) Appropriately release older, shared, context structures.
+
+7) Low Level Design
+-------------------
+Implementation of unshare can be grouped in the following 4 different
+items:
+ a) Reorganization of existing copy_* functions
+ b) unshare system call service function
+ c) unshare helper functions for each different process context
+ d) Registration of system call number for different architectures
+
+ 7.1) Reorganization of copy_* functions
+ Each copy function such as copy_mm, copy_namespace, copy_files,
+ etc, had roughly two components. The first component allocated
+ and duplicated the appropriate structure and the second component
+ linked it to the task structure passed in as an argument to the copy
+ function. The first component was split into its own function.
+ These dup_* functions allocated and duplicated the appropriate
+ context structure. The reorganized copy_* functions invoked
+ their corresponding dup_* functions and then linked the newly
+ duplicated structures to the task structure with which the
+ copy function was called.
+
+ 7.2) unshare system call service function
+ * Check flags
+ Force implied flags. If CLONE_THREAD is set force CLONE_VM.
+ If CLONE_VM is set, force CLONE_SIGHAND. If CLONE_SIGHAND is
+ set and signals are also being shared, force CLONE_THREAD. If
+ CLONE_NEWNS is set, force CLONE_FS.
+ * For each context flag, invoke the corresponding unshare_*
+ helper routine with flags passed into the system call and a
+ reference to pointer pointing the new unshared structure
+ * If any new structures are created by unshare_* helper
+ functions, take the task_lock() on the current task,
+ modify appropriate context pointers, and release the
+ task lock.
+ * For all newly unshared structures, release the corresponding
+ older, shared, structures.
+
+ 7.3) unshare_* helper functions
+ For unshare_* helpers corresponding to CLONE_SYSVSEM, CLONE_SIGHAND,
+ and CLONE_THREAD, return -EINVAL since they are not implemented yet.
+ For others, check the flag value to see if the unsharing is
+ required for that structure. If it is, invoke the corresponding
+ dup_* function to allocate and duplicate the structure and return
+ a pointer to it.
+
+ 7.4) Appropriately modify architecture specific code to register the
+ the new system call.
+
+8) Test Specification
+---------------------
+The test for unshare should test the following:
+ 1) Valid flags: Test to check that clone flags for signal and
+ signal handlers, for which unsharing is not implemented
+ yet, return -EINVAL.
+ 2) Missing/implied flags: Test to make sure that if unsharing
+ namespace without specifying unsharing of filesystem, correctly
+ unshares both namespace and filesystem information.
+ 3) For each of the four (namespace, filesystem, files and vm)
+ supported unsharing, verify that the system call correctly
+ unshares the appropriate structure. Verify that unsharing
+ them individually as well as in combination with each
+ other works as expected.
+ 4) Concurrent execution: Use shared memory segments and futex on
+ an address in the shm segment to synchronize execution of
+ about 10 threads. Have a couple of threads execute execve,
+ a couple _exit and the rest unshare with different combination
+ of flags. Verify that unsharing is performed as expected and
+ that there are no oops or hangs.
+
+9) Future Work
+--------------
+The current implementation of unshare does not allow unsharing of
+signals and signal handlers. Signals are complex to begin with and
+to unshare signals and/or signal handlers of a currently running
+process is even more complex. If in the future there is a specific
+need to allow unsharing of signals and/or signal handlers, it can
+be incrementally added to unshare without affecting legacy
+applications using unshare.
+
diff --git a/Documentation/usb/et61x251.txt b/Documentation/usb/et61x251.txt
new file mode 100644
index 0000000..b44dda4
--- /dev/null
+++ b/Documentation/usb/et61x251.txt
@@ -0,0 +1,306 @@
+
+ ET61X[12]51 PC Camera Controllers
+ Driver for Linux
+ =================================
+
+ - Documentation -
+
+
+Index
+=====
+1. Copyright
+2. Disclaimer
+3. License
+4. Overview and features
+5. Module dependencies
+6. Module loading
+7. Module parameters
+8. Optional device control through "sysfs"
+9. Supported devices
+10. Notes for V4L2 application developers
+11. Contact information
+
+
+1. Copyright
+============
+Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>
+
+
+2. Disclaimer
+=============
+Etoms is a trademark of Etoms Electronics Corp.
+This software is not developed or sponsored by Etoms Electronics.
+
+
+3. License
+==========
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+4. Overview and features
+========================
+This driver supports the video interface of the devices mounting the ET61X151
+or ET61X251 PC Camera Controllers.
+
+It's worth to note that Etoms Electronics has never collaborated with the
+author during the development of this project; despite several requests,
+Etoms Electronics also refused to release enough detailed specifications of
+the video compression engine.
+
+The driver relies on the Video4Linux2 and USB core modules. It has been
+designed to run properly on SMP systems as well.
+
+The latest version of the ET61X[12]51 driver can be found at the following URL:
+http://www.linux-projects.org/
+
+Some of the features of the driver are:
+
+- full compliance with the Video4Linux2 API (see also "Notes for V4L2
+ application developers" paragraph);
+- available mmap or read/poll methods for video streaming through isochronous
+ data transfers;
+- automatic detection of image sensor;
+- support for any window resolutions and optional panning within the maximum
+ pixel area of image sensor;
+- image downscaling with arbitrary scaling factors from 1 and 2 in both
+ directions (see "Notes for V4L2 application developers" paragraph);
+- two different video formats for uncompressed or compressed data in low or
+ high compression quality (see also "Notes for V4L2 application developers"
+ paragraph);
+- full support for the capabilities of every possible image sensors that can
+ be connected to the ET61X[12]51 bridges, including, for istance, red, green,
+ blue and global gain adjustments and exposure control (see "Supported
+ devices" paragraph for details);
+- use of default color settings for sunlight conditions;
+- dynamic I/O interface for both ET61X[12]51 and image sensor control (see
+ "Optional device control through 'sysfs'" paragraph);
+- dynamic driver control thanks to various module parameters (see "Module
+ parameters" paragraph);
+- up to 64 cameras can be handled at the same time; they can be connected and
+ disconnected from the host many times without turning off the computer, if
+ the system supports hotplugging;
+- no known bugs.
+
+
+5. Module dependencies
+======================
+For it to work properly, the driver needs kernel support for Video4Linux and
+USB.
+
+The following options of the kernel configuration file must be enabled and
+corresponding modules must be compiled:
+
+ # Multimedia devices
+ #
+ CONFIG_VIDEO_DEV=m
+
+To enable advanced debugging functionality on the device through /sysfs:
+
+ # Multimedia devices
+ #
+ CONFIG_VIDEO_ADV_DEBUG=y
+
+ # USB support
+ #
+ CONFIG_USB=m
+
+In addition, depending on the hardware being used, the modules below are
+necessary:
+
+ # USB Host Controller Drivers
+ #
+ CONFIG_USB_EHCI_HCD=m
+ CONFIG_USB_UHCI_HCD=m
+ CONFIG_USB_OHCI_HCD=m
+
+And finally:
+
+ # USB Multimedia devices
+ #
+ CONFIG_USB_ET61X251=m
+
+
+6. Module loading
+=================
+To use the driver, it is necessary to load the "et61x251" module into memory
+after every other module required: "videodev", "usbcore" and, depending on
+the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
+
+Loading can be done as shown below:
+
+ [root@localhost home]# modprobe et61x251
+
+At this point the devices should be recognized. You can invoke "dmesg" to
+analyze kernel messages and verify that the loading process has gone well:
+
+ [user@localhost home]$ dmesg
+
+
+7. Module parameters
+====================
+Module parameters are listed below:
+-------------------------------------------------------------------------------
+Name: video_nr
+Type: short array (min = 0, max = 64)
+Syntax: <-1|n[,...]>
+Description: Specify V4L2 minor mode number:
+ -1 = use next available
+ n = use minor number n
+ You can specify up to 64 cameras this way.
+ For example:
+ video_nr=-1,2,-1 would assign minor number 2 to the second
+ registered camera and use auto for the first one and for every
+ other camera.
+Default: -1
+-------------------------------------------------------------------------------
+Name: force_munmap
+Type: bool array (min = 0, max = 64)
+Syntax: <0|1[,...]>
+Description: Force the application to unmap previously mapped buffer memory
+ before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
+ all the applications support this feature. This parameter is
+ specific for each detected camera.
+ 0 = do not force memory unmapping
+ 1 = force memory unmapping (save memory)
+Default: 0
+-------------------------------------------------------------------------------
+Name: debug
+Type: ushort
+Syntax: <n>
+Description: Debugging information level, from 0 to 3:
+ 0 = none (use carefully)
+ 1 = critical errors
+ 2 = significant informations
+ 3 = more verbose messages
+ Level 3 is useful for testing only, when only one device
+ is used at the same time. It also shows some more informations
+ about the hardware being detected. This module parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
+Default: 2
+-------------------------------------------------------------------------------
+
+
+8. Optional device control through "sysfs"
+==========================================
+If the kernel has been compiled with the CONFIG_VIDEO_ADV_DEBUG option enabled,
+it is possible to read and write both the ET61X[12]51 and the image sensor
+registers by using the "sysfs" filesystem interface.
+
+There are four files in the /sys/class/video4linux/videoX directory for each
+registered camera: "reg", "val", "i2c_reg" and "i2c_val". The first two files
+control the ET61X[12]51 bridge, while the other two control the sensor chip.
+"reg" and "i2c_reg" hold the values of the current register index where the
+following reading/writing operations are addressed at through "val" and
+"i2c_val". Their use is not intended for end-users, unless you know what you
+are doing. Remember that you must be logged in as root before writing to them.
+
+As an example, suppose we were to want to read the value contained in the
+register number 1 of the sensor register table - which is usually the product
+identifier - of the camera registered as "/dev/video0":
+
+ [root@localhost #] cd /sys/class/video4linux/video0
+ [root@localhost #] echo 1 > i2c_reg
+ [root@localhost #] cat i2c_val
+
+Note that if the sensor registers can not be read, "cat" will fail.
+To avoid race conditions, all the I/O accesses to the files are serialized.
+
+
+9. Supported devices
+====================
+None of the names of the companies as well as their products will be mentioned
+here. They have never collaborated with the author, so no advertising.
+
+From the point of view of a driver, what unambiguously identify a device are
+its vendor and product USB identifiers. Below is a list of known identifiers of
+devices mounting the ET61X[12]51 PC camera controllers:
+
+Vendor ID Product ID
+--------- ----------
+0x102c 0x6151
+0x102c 0x6251
+0x102c 0x6253
+0x102c 0x6254
+0x102c 0x6255
+0x102c 0x6256
+0x102c 0x6257
+0x102c 0x6258
+0x102c 0x6259
+0x102c 0x625a
+0x102c 0x625b
+0x102c 0x625c
+0x102c 0x625d
+0x102c 0x625e
+0x102c 0x625f
+0x102c 0x6260
+0x102c 0x6261
+0x102c 0x6262
+0x102c 0x6263
+0x102c 0x6264
+0x102c 0x6265
+0x102c 0x6266
+0x102c 0x6267
+0x102c 0x6268
+0x102c 0x6269
+
+The following image sensors are supported:
+
+Model Manufacturer
+----- ------------
+TAS5130D1B Taiwan Advanced Sensor Corporation
+
+All the available control settings of each image sensor are supported through
+the V4L2 interface.
+
+
+10. Notes for V4L2 application developers
+========================================
+This driver follows the V4L2 API specifications. In particular, it enforces two
+rules:
+
+- exactly one I/O method, either "mmap" or "read", is associated with each
+file descriptor. Once it is selected, the application must close and reopen the
+device to switch to the other I/O method;
+
+- although it is not mandatory, previously mapped buffer memory should always
+be unmapped before calling any "VIDIOC_S_CROP" or "VIDIOC_S_FMT" ioctl's.
+The same number of buffers as before will be allocated again to match the size
+of the new video frames, so you have to map the buffers again before any I/O
+attempts on them.
+
+Consistently with the hardware limits, this driver also supports image
+downscaling with arbitrary scaling factors from 1 and 2 in both directions.
+However, the V4L2 API specifications don't correctly define how the scaling
+factor can be chosen arbitrarily by the "negotiation" of the "source" and
+"target" rectangles. To work around this flaw, we have added the convention
+that, during the negotiation, whenever the "VIDIOC_S_CROP" ioctl is issued, the
+scaling factor is restored to 1.
+
+This driver supports two different video formats: the first one is the "8-bit
+Sequential Bayer" format and can be used to obtain uncompressed video data
+from the device through the current I/O method, while the second one provides
+"raw" compressed video data (without frame headers not related to the
+compressed data). The current compression quality may vary from 0 to 1 and can
+be selected or queried thanks to the VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP
+V4L2 ioctl's.
+
+
+11. Contact information
+=======================
+The author may be contacted by e-mail at <luca.risolia@studio.unibo.it>.
+
+GPG/PGP encrypted e-mail's are accepted. The GPG key ID of the author is
+'FCE635A4'; the public 1024-bit key should be available at any keyserver;
+the fingerprint is: '88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4'.
diff --git a/Documentation/usb/sn9c102.txt b/Documentation/usb/sn9c102.txt
index 3f8a119..c6b7641 100644
--- a/Documentation/usb/sn9c102.txt
+++ b/Documentation/usb/sn9c102.txt
@@ -17,16 +17,15 @@
7. Module parameters
8. Optional device control through "sysfs"
9. Supported devices
-10. How to add plug-in's for new image sensors
-11. Notes for V4L2 application developers
-12. Video frame formats
-13. Contact information
-14. Credits
+10. Notes for V4L2 application developers
+11. Video frame formats
+12. Contact information
+13. Credits
1. Copyright
============
-Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it>
+Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>
2. Disclaimer
@@ -54,9 +53,8 @@
4. Overview and features
========================
-This driver attempts to support the video and audio streaming capabilities of
-the devices mounting the SONiX SN9C101, SN9C102 and SN9C103 PC Camera
-Controllers.
+This driver attempts to support the video interface of the devices mounting the
+SONiX SN9C101, SN9C102 and SN9C103 PC Camera Controllers.
It's worth to note that SONiX has never collaborated with the author during the
development of this project, despite several requests for enough detailed
@@ -78,6 +76,7 @@
- available mmap or read/poll methods for video streaming through isochronous
data transfers;
- automatic detection of image sensor;
+- support for built-in microphone interface;
- support for any window resolutions and optional panning within the maximum
pixel area of image sensor;
- image downscaling with arbitrary scaling factors from 1, 2 and 4 in both
@@ -96,7 +95,7 @@
parameters" paragraph);
- up to 64 cameras can be handled at the same time; they can be connected and
disconnected from the host many times without turning off the computer, if
- your system supports hotplugging;
+ the system supports hotplugging;
- no known bugs.
@@ -112,6 +111,12 @@
#
CONFIG_VIDEO_DEV=m
+To enable advanced debugging functionality on the device through /sysfs:
+
+ # Multimedia devices
+ #
+ CONFIG_VIDEO_ADV_DEBUG=y
+
# USB support
#
CONFIG_USB=m
@@ -125,6 +130,21 @@
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
+The SN9C103 controller also provides a built-in microphone interface. It is
+supported by the USB Audio driver thanks to the ALSA API:
+
+ # Sound
+ #
+ CONFIG_SOUND=y
+
+ # Advanced Linux Sound Architecture
+ #
+ CONFIG_SND=m
+
+ # USB devices
+ #
+ CONFIG_SND_USB_AUDIO=m
+
And finally:
# USB Multimedia devices
@@ -153,7 +173,7 @@
Module parameters are listed below:
-------------------------------------------------------------------------------
Name: video_nr
-Type: int array (min = 0, max = 64)
+Type: short array (min = 0, max = 64)
Syntax: <-1|n[,...]>
Description: Specify V4L2 minor mode number:
-1 = use next available
@@ -165,19 +185,19 @@
other camera.
Default: -1
-------------------------------------------------------------------------------
-Name: force_munmap;
+Name: force_munmap
Type: bool array (min = 0, max = 64)
Syntax: <0|1[,...]>
Description: Force the application to unmap previously mapped buffer memory
before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
all the applications support this feature. This parameter is
specific for each detected camera.
- 0 = do not force memory unmapping"
- 1 = force memory unmapping (save memory)"
+ 0 = do not force memory unmapping
+ 1 = force memory unmapping (save memory)
Default: 0
-------------------------------------------------------------------------------
Name: debug
-Type: int
+Type: ushort
Syntax: <n>
Description: Debugging information level, from 0 to 3:
0 = none (use carefully)
@@ -187,14 +207,15 @@
Level 3 is useful for testing only, when only one device
is used. It also shows some more informations about the
hardware being detected. This parameter can be changed at
- runtime thanks to the /sys filesystem.
+ runtime thanks to the /sys filesystem interface.
Default: 2
-------------------------------------------------------------------------------
8. Optional device control through "sysfs" [1]
==========================================
-It is possible to read and write both the SN9C10x and the image sensor
+If the kernel has been compiled with the CONFIG_VIDEO_ADV_DEBUG option enabled,
+it is possible to read and write both the SN9C10x and the image sensor
registers by using the "sysfs" filesystem interface.
Every time a supported device is recognized, a write-only file named "green" is
@@ -236,7 +257,7 @@
The sysfs interface also provides the "frame_header" entry, which exports the
frame header of the most recent requested and captured video frame. The header
-is 12-bytes long and is appended to every video frame by the SN9C10x
+is always 18-bytes long and is appended to every video frame by the SN9C10x
controllers. As an example, this additional information can be used by the user
application for implementing auto-exposure features via software.
@@ -250,7 +271,8 @@
0x03 0xC4 Frame synchronisation pattern.
0x04 0xC4 Frame synchronisation pattern.
0x05 0x96 Frame synchronisation pattern.
-0x06 0x00 or 0x01 Unknown meaning. The exact value depends on the chip.
+0x06 0xXX Unknown meaning. The exact value depends on the chip;
+ possible values are 0x00, 0x01 and 0x20.
0x07 0xXX Variable value, whose bits are ff00uzzc, where ff is a
frame counter, u is unknown, zz is a size indicator
(00 = VGA, 01 = SIF, 10 = QSIF) and c stands for
@@ -267,12 +289,23 @@
times the area outside of the specified AE area. For
images that are not pure white, the value scales down
according to relative whiteness.
+ according to relative whiteness.
+
+The following bytes are used by the SN9C103 bridge only:
+
+0x0C 0xXX Unknown meaning
+0x0D 0xXX Unknown meaning
+0x0E 0xXX Unknown meaning
+0x0F 0xXX Unknown meaning
+0x10 0xXX Unknown meaning
+0x11 0xXX Unknown meaning
The AE area (sx, sy, ex, ey) in the active window can be set by programming the
registers 0x1c, 0x1d, 0x1e and 0x1f of the SN9C10x controllers, where one unit
corresponds to 32 pixels.
-[1] The frame header has been documented by Bertrik Sikken.
+[1] Part of the meaning of the frame header has been documented by Bertrik
+ Sikken.
9. Supported devices
@@ -298,6 +331,7 @@
0x0c45 0x602b
0x0c45 0x602c
0x0c45 0x602d
+0x0c45 0x602e
0x0c45 0x6030
0x0c45 0x6080
0x0c45 0x6082
@@ -348,18 +382,7 @@
driver.
-10. How to add plug-in's for new image sensors
-==============================================
-It should be easy to write plug-in's for new sensors by using the small API
-that has been created for this purpose, which is present in "sn9c102_sensor.h"
-(documentation is included there). As an example, have a look at the code in
-"sn9c102_pas106b.c", which uses the mentioned interface.
-
-At the moment, possible unsupported image sensors are: CIS-VF10 (VGA),
-OV7620 (VGA), OV7630 (VGA).
-
-
-11. Notes for V4L2 application developers
+10. Notes for V4L2 application developers
=========================================
This driver follows the V4L2 API specifications. In particular, it enforces two
rules:
@@ -394,7 +417,7 @@
supplied by this driver).
-12. Video frame formats [1]
+11. Video frame formats [1]
=======================
The SN9C10x PC Camera Controllers can send images in two possible video
formats over the USB: either native "Sequential RGB Bayer" or Huffman
@@ -455,7 +478,7 @@
documented by Bertrik Sikken.
-13. Contact information
+12. Contact information
=======================
The author may be contacted by e-mail at <luca.risolia@studio.unibo.it>.
@@ -464,7 +487,7 @@
the fingerprint is: '88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4'.
-14. Credits
+13. Credits
===========
Many thanks to following persons for their contribute (listed in alphabetical
order):
@@ -480,5 +503,5 @@
- Bertrik Sikken, who reverse-engineered and documented the Huffman compression
algorithm used in the SN9C10x controllers and implemented the first decoder;
- Mizuno Takafumi for the donation of a webcam;
-- An "anonymous" donator (who didn't want his name to be revealed) for the
+- an "anonymous" donator (who didn't want his name to be revealed) for the
donation of a webcam.
diff --git a/Documentation/usb/w9968cf.txt b/Documentation/usb/w9968cf.txt
index 18a4773..9d46cd0 100644
--- a/Documentation/usb/w9968cf.txt
+++ b/Documentation/usb/w9968cf.txt
@@ -57,16 +57,12 @@
The driver is divided into two modules: the basic one, "w9968cf", is needed for
the supported devices to work; the second one, "w9968cf-vpp", is an optional
module, which provides some useful video post-processing functions like video
-decoding, up-scaling and colour conversions. Once the driver is installed,
-every time an application tries to open a recognized device, "w9968cf" checks
-the presence of the "w9968cf-vpp" module and loads it automatically by default.
+decoding, up-scaling and colour conversions.
-Please keep in mind that official kernels do not include the second module for
-performance purposes. However it is always recommended to download and install
-the latest and complete release of the driver, replacing the existing one, if
-present: it will be still even possible not to load the "w9968cf-vpp" module at
-all, if you ever want to. Another important missing feature of the version in
-the official Linux 2.4 kernels is the writeable /proc filesystem interface.
+Note that the official kernels do neither include nor support the second
+module for performance purposes. Therefore, it is always recommended to
+download and install the latest and complete release of the driver,
+replacing the existing one, if present.
The latest and full-featured version of the W996[87]CF driver can be found at:
http://www.linux-projects.org. Please refer to the documentation included in
@@ -201,22 +197,6 @@
enabled for the 'ovcamchip' module to be loaded and for
this parameter to be present.
-------------------------------------------------------------------------------
-Name: vppmod_load
-Type: bool
-Syntax: <0|1>
-Description: Automatic 'w9968cf-vpp' module loading: 0 disabled, 1 enabled.
- If enabled, every time an application attempts to open a
- camera, 'insmod' searches for the video post-processing module
- in the system and loads it automatically (if present).
- The optional 'w9968cf-vpp' module adds extra image manipulation
- capabilities to the 'w9968cf' module,like software up-scaling,
- colour conversions and video decompression for very high frame
- rates.
-Default: 1
-Note: The kernel must be compiled with the CONFIG_KMOD option
- enabled for the 'w9968cf-vpp' module to be loaded and for
- this parameter to be present.
--------------------------------------------------------------------------------
Name: simcams
Type: int
Syntax: <n>
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 56e194f..8bea3fb 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -42,4 +42,4 @@
41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) [0070:9800,0070:9802]
42 -> digitalnow DNTV Live! DVB-T Pro [1822:0025]
43 -> KWorld/VStream XPert DVB-T with cx22702 [17de:08a1]
- 44 -> DViCO FusionHDTV DVB-T Dual Digital [18ac:db50]
+ 44 -> DViCO FusionHDTV DVB-T Dual Digital [18ac:db50,18ac:db54]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index cb3a59b..8a35259 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -1,7 +1,7 @@
0 -> UNKNOWN/GENERIC
1 -> Proteus Pro [philips reference design] [1131:2001,1131:2001]
2 -> LifeView FlyVIDEO3000 [5168:0138,4e42:0138]
- 3 -> LifeView FlyVIDEO2000 [5168:0138]
+ 3 -> LifeView/Typhoon FlyVIDEO2000 [5168:0138,4e42:0138]
4 -> EMPRESS [1131:6752]
5 -> SKNet Monster TV [1131:4e85]
6 -> Tevion MD 9717
@@ -53,12 +53,12 @@
52 -> AverMedia AverTV/305 [1461:2108]
53 -> ASUS TV-FM 7135 [1043:4845]
54 -> LifeView FlyTV Platinum FM [5168:0214,1489:0214]
- 55 -> LifeView FlyDVB-T DUO [5168:0502,5168:0306]
+ 55 -> LifeView FlyDVB-T DUO [5168:0306]
56 -> Avermedia AVerTV 307 [1461:a70a]
57 -> Avermedia AVerTV GO 007 FM [1461:f31f]
58 -> ADS Tech Instant TV (saa7135) [1421:0350,1421:0351,1421:0370,1421:1370]
59 -> Kworld/Tevion V-Stream Xpert TV PVR7134
- 60 -> Typhoon DVB-T Duo Digital/Analog Cardbus [4e42:0502]
+ 60 -> LifeView/Typhoon FlyDVB-T Duo Cardbus [5168:0502,4e42:0502]
61 -> Philips TOUGH DVB-T reference design [1131:2004]
62 -> Compro VideoMate TV Gold+II
63 -> Kworld Xpert TV PVR7134
diff --git a/Documentation/vm/page_migration b/Documentation/vm/page_migration
new file mode 100644
index 0000000..c52820f
--- /dev/null
+++ b/Documentation/vm/page_migration
@@ -0,0 +1,129 @@
+Page migration
+--------------
+
+Page migration allows the moving of the physical location of pages between
+nodes in a numa system while the process is running. This means that the
+virtual addresses that the process sees do not change. However, the
+system rearranges the physical location of those pages.
+
+The main intend of page migration is to reduce the latency of memory access
+by moving pages near to the processor where the process accessing that memory
+is running.
+
+Page migration allows a process to manually relocate the node on which its
+pages are located through the MF_MOVE and MF_MOVE_ALL options while setting
+a new memory policy. The pages of process can also be relocated
+from another process using the sys_migrate_pages() function call. The
+migrate_pages function call takes two sets of nodes and moves pages of a
+process that are located on the from nodes to the destination nodes.
+
+Manual migration is very useful if for example the scheduler has relocated
+a process to a processor on a distant node. A batch scheduler or an
+administrator may detect the situation and move the pages of the process
+nearer to the new processor. At some point in the future we may have
+some mechanism in the scheduler that will automatically move the pages.
+
+Larger installations usually partition the system using cpusets into
+sections of nodes. Paul Jackson has equipped cpusets with the ability to
+move pages when a task is moved to another cpuset. This allows automatic
+control over locality of a process. If a task is moved to a new cpuset
+then also all its pages are moved with it so that the performance of the
+process does not sink dramatically (as is the case today).
+
+Page migration allows the preservation of the relative location of pages
+within a group of nodes for all migration techniques which will preserve a
+particular memory allocation pattern generated even after migrating a
+process. This is necessary in order to preserve the memory latencies.
+Processes will run with similar performance after migration.
+
+Page migration occurs in several steps. First a high level
+description for those trying to use migrate_pages() and then
+a low level description of how the low level details work.
+
+A. Use of migrate_pages()
+-------------------------
+
+1. Remove pages from the LRU.
+
+ Lists of pages to be migrated are generated by scanning over
+ pages and moving them into lists. This is done by
+ calling isolate_lru_page() or __isolate_lru_page().
+ Calling isolate_lru_page increases the references to the page
+ so that it cannot vanish under us.
+
+2. Generate a list of newly allocates page to move the contents
+ of the first list to.
+
+3. The migrate_pages() function is called which attempts
+ to do the migration. It returns the moved pages in the
+ list specified as the third parameter and the failed
+ migrations in the fourth parameter. The first parameter
+ will contain the pages that could still be retried.
+
+4. The leftover pages of various types are returned
+ to the LRU using putback_to_lru_pages() or otherwise
+ disposed of. The pages will still have the refcount as
+ increased by isolate_lru_pages()!
+
+B. Operation of migrate_pages()
+--------------------------------
+
+migrate_pages does several passes over its list of pages. A page is moved
+if all references to a page are removable at the time.
+
+Steps:
+
+1. Lock the page to be migrated
+
+2. Insure that writeback is complete.
+
+3. Make sure that the page has assigned swap cache entry if
+ it is an anonyous page. The swap cache reference is necessary
+ to preserve the information contain in the page table maps.
+
+4. Prep the new page that we want to move to. It is locked
+ and set to not being uptodate so that all accesses to the new
+ page immediately lock while we are moving references.
+
+5. All the page table references to the page are either dropped (file backed)
+ or converted to swap references (anonymous pages). This should decrease the
+ reference count.
+
+6. The radix tree lock is taken
+
+7. The refcount of the page is examined and we back out if references remain
+ otherwise we know that we are the only one referencing this page.
+
+8. The radix tree is checked and if it does not contain the pointer to this
+ page then we back out.
+
+9. The mapping is checked. If the mapping is gone then a truncate action may
+ be in progress and we back out.
+
+10. The new page is prepped with some settings from the old page so that accesses
+ to the new page will be discovered to have the correct settings.
+
+11. The radix tree is changed to point to the new page.
+
+12. The reference count of the old page is dropped because the reference has now
+ been removed.
+
+13. The radix tree lock is dropped.
+
+14. The page contents are copied to the new page.
+
+15. The remaining page flags are copied to the new page.
+
+16. The old page flags are cleared to indicate that the page does
+ not use any information anymore.
+
+17. Queued up writeback on the new page is triggered.
+
+18. If swap pte's were generated for the page then remove them again.
+
+19. The locks are dropped from the old and new page.
+
+20. The new page is moved to the LRU.
+
+Christoph Lameter, December 19, 2005.
+
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index 9c5fc15..153740f 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -40,6 +40,18 @@
no_timer_check Don't check the IO-APIC timer. This can work around
problems with incorrect timer initialization on some boards.
+ apicmaintimer Run time keeping from the local APIC timer instead
+ of using the PIT/HPET interrupt for this. This is useful
+ when the PIT/HPET interrupts are unreliable.
+
+ noapicmaintimer Don't do time keeping using the APIC timer.
+ Useful when this option was auto selected, but doesn't work.
+
+ apicpmtimer
+ Do APIC timer calibration using the pmtimer. Implies
+ apicmaintimer. Useful when your PIT timer is totally
+ broken.
+
Early Console
syntax: earlyprintk=vga
diff --git a/MAINTAINERS b/MAINTAINERS
index 3f8a90a..b22db52 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -540,7 +540,8 @@
BTTV VIDEO4LINUX DRIVER
P: Mauro Carvalho Chehab
-M: mchehab@brturbo.com.br
+M: mchehab@infradead.org
+M: v4l-dvb-maintainer@linuxtv.org
L: video4linux-list@redhat.com
W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
@@ -557,7 +558,8 @@
CONFIGFS
P: Joel Becker
-M: Joel Becker <joel.becker@oracle.com>
+M: joel.becker@oracle.com
+L: linux-kernel@vger.kernel.org
S: Supported
CIRRUS LOGIC GENERIC FBDEV DRIVER
@@ -836,11 +838,12 @@
DVB SUBSYSTEM AND DRIVERS
P: LinuxTV.org Project
-M: linux-dvb-maintainer@linuxtv.org
+M: mchehab@infradead.org
+M: v4l-dvb-maintainer@linuxtv.org
L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
-S: Supported
+S: Maintained
EATA-DMA SCSI DRIVER
P: Michael Neuffer
@@ -928,6 +931,12 @@
L: ext3-users@redhat.com
S: Maintained
+F71805F HARDWARE MONITORING DRIVER
+P: Jean Delvare
+M: khali@linux-fr.org
+L: lm-sensors@lm-sensors.org
+S: Maintained
+
FARSYNC SYNCHRONOUS DRIVER
P: Kevin Curtis
M: kevin.curtis@farsite.co.uk
@@ -1176,8 +1185,8 @@
S: Maintained
SN-IA64 (Itanium) SUB-PLATFORM
-P: Greg Edwards
-M: edwardsg@sgi.com
+P: Jes Sorensen
+M: jes@sgi.com
L: linux-altix@sgi.com
L: linux-ia64@vger.kernel.org
W: http://www.sgi.com/altix
@@ -1984,7 +1993,6 @@
P: Tim Waugh
M: tim@cyberelk.net
P: David Campbell
-M: campbell@torque.net
P: Andrea Arcangeli
M: andrea@suse.de
L: linux-parport@lists.infradead.org
@@ -2298,7 +2306,7 @@
SELINUX SECURITY MODULE
P: Stephen Smalley
-M: sds@epoch.ncsc.mil
+M: sds@tycho.nsa.gov
P: James Morris
M: jmorris@namei.org
L: linux-kernel@vger.kernel.org (kernel issues)
@@ -2673,6 +2681,14 @@
L: linux-usb-devel@lists.sourceforge.net
S: Maintained
+USB ET61X[12]51 DRIVER
+P: Luca Risolia
+M: luca.risolia@studio.unibo.it
+L: linux-usb-devel@lists.sourceforge.net
+L: video4linux-list@redhat.com
+W: http://www.linux-projects.org
+S: Maintained
+
USB HID/HIDBP DRIVERS
P: Vojtech Pavlik
M: vojtech@suse.cz
@@ -2836,6 +2852,7 @@
P: Luca Risolia
M: luca.risolia@studio.unibo.it
L: linux-usb-devel@lists.sourceforge.net
+L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
@@ -2865,6 +2882,7 @@
P: Luca Risolia
M: luca.risolia@studio.unibo.it
L: linux-usb-devel@lists.sourceforge.net
+L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
@@ -2946,7 +2964,8 @@
VIDEO FOR LINUX
P: Mauro Carvalho Chehab
-M: mchehab@brturbo.com.br
+M: mchehab@infradead.org
+M: v4l-dvb-maintainer@linuxtv.org
L: video4linux-list@redhat.com
W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
diff --git a/Makefile b/Makefile
index 252a659..a1158d1 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 16
-EXTRAVERSION =-rc1
+EXTRAVERSION =-rc2
NAME=Sliding Snow Leopard
# *DOCUMENTATION*
@@ -442,7 +442,7 @@
config %config: scripts_basic outputmakefile FORCE
$(Q)mkdir -p include/linux
$(Q)$(MAKE) $(build)=scripts/kconfig $@
- $(Q)$(MAKE) .kernelrelease
+ $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease
else
# ===========================================================================
diff --git a/arch/alpha/kernel/asm-offsets.c b/arch/alpha/kernel/asm-offsets.c
index 8f2e5c7..6c56c75 100644
--- a/arch/alpha/kernel/asm-offsets.c
+++ b/arch/alpha/kernel/asm-offsets.c
@@ -28,6 +28,7 @@
DEFINE(TASK_GID, offsetof(struct task_struct, gid));
DEFINE(TASK_EGID, offsetof(struct task_struct, egid));
DEFINE(TASK_REAL_PARENT, offsetof(struct task_struct, real_parent));
+ DEFINE(TASK_GROUP_LEADER, offsetof(struct task_struct, group_leader));
DEFINE(TASK_TGID, offsetof(struct task_struct, tgid));
BLANK();
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index e38671c..7af15bf 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -879,17 +879,19 @@
/* See linux/kernel/timer.c sys_getppid for discussion
about this loop. */
- ldq $3, TASK_REAL_PARENT($2)
-1: ldl $1, TASK_TGID($3)
+ ldq $3, TASK_GROUP_LEADER($2)
+ ldq $4, TASK_REAL_PARENT($3)
+ ldl $0, TASK_TGID($2)
+1: ldl $1, TASK_TGID($4)
#ifdef CONFIG_SMP
- mov $3, $4
+ mov $4, $5
mb
- ldq $3, TASK_REAL_PARENT($2)
- cmpeq $3, $4, $4
- beq $4, 1b
+ ldq $3, TASK_GROUP_LEADER($2)
+ ldq $4, TASK_REAL_PARENT($3)
+ cmpeq $4, $5, $5
+ beq $5, 1b
#endif
stq $1, 80($sp)
- ldl $0, TASK_TGID($2)
ret
.end sys_getxpid
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index 76be5cf..9006063 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -68,34 +68,32 @@
#ifdef CONFIG_SMP
int j;
#endif
- int i = *(loff_t *) v;
+ int irq = *(loff_t *) v;
struct irqaction * action;
unsigned long flags;
#ifdef CONFIG_SMP
- if (i == 0) {
+ if (irq == 0) {
seq_puts(p, " ");
- for (i = 0; i < NR_CPUS; i++)
- if (cpu_online(i))
- seq_printf(p, "CPU%d ", i);
+ for_each_online_cpu(j)
+ seq_printf(p, "CPU%d ", j);
seq_putc(p, '\n');
}
#endif
- if (i < ACTUAL_NR_IRQS) {
- spin_lock_irqsave(&irq_desc[i].lock, flags);
- action = irq_desc[i].action;
+ if (irq < ACTUAL_NR_IRQS) {
+ spin_lock_irqsave(&irq_desc[irq].lock, flags);
+ action = irq_desc[irq].action;
if (!action)
goto unlock;
- seq_printf(p, "%3d: ",i);
+ seq_printf(p, "%3d: ", irq);
#ifndef CONFIG_SMP
- seq_printf(p, "%10u ", kstat_irqs(i));
+ seq_printf(p, "%10u ", kstat_irqs(irq));
#else
- for (j = 0; j < NR_CPUS; j++)
- if (cpu_online(j))
- seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", kstat_cpu(j).irqs[irq]);
#endif
- seq_printf(p, " %14s", irq_desc[i].handler->typename);
+ seq_printf(p, " %14s", irq_desc[irq].handler->typename);
seq_printf(p, " %c%s",
(action->flags & SA_INTERRUPT)?'+':' ',
action->name);
@@ -108,13 +106,12 @@
seq_putc(p, '\n');
unlock:
- spin_unlock_irqrestore(&irq_desc[i].lock, flags);
- } else if (i == ACTUAL_NR_IRQS) {
+ spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
+ } else if (irq == ACTUAL_NR_IRQS) {
#ifdef CONFIG_SMP
seq_puts(p, "IPI: ");
- for (i = 0; i < NR_CPUS; i++)
- if (cpu_online(i))
- seq_printf(p, "%10lu ", cpu_data[i].ipi_count);
+ for_each_online_cpu(j)
+ seq_printf(p, "%10lu ", cpu_data[j].ipi_count);
seq_putc(p, '\n');
#endif
seq_printf(p, "ERR: %10lu\n", irq_err_count);
@@ -122,7 +119,6 @@
return 0;
}
-
/*
* handle_irq handles all normal device IRQ's (the special
* SMP cross-CPU interrupts have their own specific
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 4b87352..02c2db0 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -73,9 +73,6 @@
EXPORT_SYMBOL(cpu_online_map);
-/* cpus reported in the hwrpb */
-static unsigned long hwrpb_cpu_present_mask __initdata = 0;
-
int smp_num_probed; /* Internal processor count */
int smp_num_cpus = 1; /* Number that came online. */
@@ -442,7 +439,7 @@
if ((cpu->flags & 0x1cc) == 0x1cc) {
smp_num_probed++;
/* Assume here that "whami" == index */
- hwrpb_cpu_present_mask |= (1UL << i);
+ cpu_set(i, cpu_possible_map);
cpu->pal_revision = boot_cpu_palrev;
}
@@ -453,12 +450,12 @@
}
} else {
smp_num_probed = 1;
- hwrpb_cpu_present_mask = (1UL << boot_cpuid);
+ cpu_set(boot_cpuid, cpu_possible_map);
}
cpu_present_mask = cpumask_of_cpu(boot_cpuid);
printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n",
- smp_num_probed, hwrpb_cpu_present_mask);
+ smp_num_probed, cpu_possible_map.bits[0]);
}
/*
@@ -467,8 +464,6 @@
void __init
smp_prepare_cpus(unsigned int max_cpus)
{
- int cpu_count, i;
-
/* Take care of some initial bookkeeping. */
memset(ipi_data, 0, sizeof(ipi_data));
@@ -486,19 +481,7 @@
printk(KERN_INFO "SMP starting up secondaries.\n");
- cpu_count = 1;
- for (i = 0; (i < NR_CPUS) && (cpu_count < max_cpus); i++) {
- if (i == boot_cpuid)
- continue;
-
- if (((hwrpb_cpu_present_mask >> i) & 1) == 0)
- continue;
-
- cpu_set(i, cpu_possible_map);
- cpu_count++;
- }
-
- smp_num_cpus = cpu_count;
+ smp_num_cpus = smp_num_probed;
}
void __devinit
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5959e36..15dc1a0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -10,9 +10,9 @@
default y
help
The ARM series is a line of low-power-consumption RISC chip designs
- licensed by ARM ltd and targeted at embedded applications and
+ licensed by ARM Ltd and targeted at embedded applications and
handhelds such as the Compaq IPAQ. ARM-based PCs are no longer
- manufactured, but legacy ARM-based PC hardware remains popular in
+ manufactured, but legacy ARM-based PC hardware remains popular in
Europe. There is an ARM Linux project with a web page at
<http://www.arm.linux.org.uk/>.
@@ -69,6 +69,9 @@
config FIQ
bool
+config ARCH_MTD_XIP
+ bool
+
source "init/Kconfig"
menu "System Type"
@@ -81,45 +84,62 @@
bool "Cirrus-CL-PS7500FE"
select TIMER_ACORN
select ISA
+ help
+ Support for the Cirrus Logic PS7500FE system-on-a-chip.
config ARCH_CLPS711X
bool "CLPS711x/EP721x-based"
+ help
+ Support for Cirrus Logic 711x/721x based boards.
config ARCH_CO285
bool "Co-EBSA285"
select FOOTBRIDGE
select FOOTBRIDGE_ADDIN
+ help
+ Support for Intel's EBSA285 companion chip.
config ARCH_EBSA110
bool "EBSA-110"
select ISA
help
This is an evaluation board for the StrongARM processor available
- from Digital. It has limited hardware on-board, including an onboard
+ from Digital. It has limited hardware on-board, including an
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
config ARCH_FOOTBRIDGE
bool "FootBridge"
select FOOTBRIDGE
+ help
+ Support for systems based on the DC21285 companion chip
+ ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
config ARCH_INTEGRATOR
bool "Integrator"
select ARM_AMBA
select ICST525
+ help
+ Support for ARM's Integrator platform.
config ARCH_IOP3XX
bool "IOP3xx-based"
select PCI
+ help
+ Support for Intel's IOP3XX (XScale) family of processors.
config ARCH_IXP4XX
bool "IXP4xx-based"
select DMABOUNCE
select PCI
+ help
+ Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
select PCI
+ help
+ Support for Intel's IXP2400/2800 (XScale) family of processors.
config ARCH_L7200
bool "LinkUp-L7200"
@@ -136,6 +156,9 @@
config ARCH_PXA
bool "PXA2xx-based"
+ select ARCH_MTD_XIP
+ help
+ Support for Intel's PXA2XX processor line.
config ARCH_RPC
bool "RiscPC"
@@ -152,19 +175,25 @@
bool "SA1100-based"
select ISA
select ARCH_DISCONTIGMEM_ENABLE
+ select ARCH_MTD_XIP
+ help
+ Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
bool "Samsung S3C2410"
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
- the Samsung SMDK2410 development board (and derviatives).
+ the Samsung SMDK2410 development board (and derivatives).
config ARCH_SHARK
bool "Shark"
select ISA
select ISA_DMA
select PCI
+ help
+ Support for the StrongARM based Digital DNARD machine, also known
+ as "Shark" (<http://www.shark-linux.de/shark.html>).
config ARCH_LH7A40X
bool "Sharp LH7A40X"
@@ -176,6 +205,8 @@
config ARCH_OMAP
bool "TI OMAP"
+ help
+ Support for TI's OMAP platform (OMAP1 and OMAP2).
config ARCH_VERSATILE
bool "Versatile"
@@ -194,6 +225,8 @@
config ARCH_IMX
bool "IMX"
+ help
+ Support for Motorola's i.MX family of processors (MX1, MXL).
config ARCH_H720X
bool "Hynix-HMS720x-based"
@@ -210,8 +243,8 @@
config ARCH_AT91RM9200
bool "AT91RM9200"
help
- Say Y here if you intend to run this kernel on an AT91RM9200-based
- board.
+ Say Y here if you intend to run this kernel on an Atmel
+ AT91RM9200-based board.
endchoice
@@ -417,8 +450,8 @@
To use this you need GCC version 4.0.0 or later.
config OABI_COMPAT
- bool "Allow old ABI binaries to run with this kernel"
- depends on AEABI
+ bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
+ depends on AEABI && EXPERIMENTAL
default y
help
This option preserves the old syscall interface along with the
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 5cdd13a..1fe73d1 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -85,7 +85,6 @@
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index 20838cc..b7d934c 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -85,7 +85,6 @@
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
diff --git a/arch/arm/configs/bast_defconfig b/arch/arm/configs/bast_defconfig
index 6886001..4a8564f 100644
--- a/arch/arm/configs/bast_defconfig
+++ b/arch/arm/configs/bast_defconfig
@@ -14,8 +14,7 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
+CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
@@ -360,7 +359,6 @@
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
@@ -781,7 +779,6 @@
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 15468a0..c9aa878 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -13,8 +13,7 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
+CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -308,9 +307,7 @@
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_OBSOLETE_CHIPS=y
-# CONFIG_MTD_AMDSTD is not set
CONFIG_MTD_SHARP=y
-# CONFIG_MTD_JEDEC is not set
#
# Mapping drivers for chip access
@@ -396,7 +393,6 @@
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
@@ -741,7 +737,6 @@
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 885a318..94bd993 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -85,7 +85,6 @@
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 95a96a5..1519124 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -85,7 +85,6 @@
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig
index 9592e39..5fdaf3c 100644
--- a/arch/arm/configs/enp2611_defconfig
+++ b/arch/arm/configs/enp2611_defconfig
@@ -171,7 +171,7 @@
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#
diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig
index d9d6bb8..c67fc44 100644
--- a/arch/arm/configs/ixdp2400_defconfig
+++ b/arch/arm/configs/ixdp2400_defconfig
@@ -172,7 +172,7 @@
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#
diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig
index 2dc9d49..60d66e8 100644
--- a/arch/arm/configs/ixdp2401_defconfig
+++ b/arch/arm/configs/ixdp2401_defconfig
@@ -172,7 +172,7 @@
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#
diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig
index ea8f4b4..f54f3dc 100644
--- a/arch/arm/configs/ixdp2801_defconfig
+++ b/arch/arm/configs/ixdp2801_defconfig
@@ -172,7 +172,7 @@
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware ixdp2x01_clock=50000000"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 33f3108..6695b07 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,11 +1,10 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Sun Nov 13 17:41:24 2005
+# Linux kernel version: 2.6.16-rc2
+# Mon Feb 6 11:17:23 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -13,8 +12,7 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
+CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -29,27 +27,31 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -103,6 +105,7 @@
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
#
# S3C24XX Implementations
@@ -161,7 +164,6 @@
# Bus support
#
CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -173,6 +175,7 @@
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -215,6 +218,8 @@
# Power management options
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
CONFIG_APM=y
#
@@ -260,6 +265,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -277,7 +287,6 @@
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -301,6 +310,11 @@
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
@@ -413,8 +427,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -473,7 +485,6 @@
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
@@ -504,7 +515,6 @@
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
@@ -609,11 +619,11 @@
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
-# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
@@ -627,6 +637,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -689,6 +700,7 @@
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
@@ -733,6 +745,12 @@
# CONFIG_I2C_DEBUG_CHIP is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Hardware Monitoring support
#
CONFIG_HWMON=y
@@ -865,6 +883,7 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
@@ -896,10 +915,10 @@
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -968,6 +987,7 @@
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -1023,12 +1043,13 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1037,6 +1058,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 75e6f9a..8c3035d 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -7,337 +7,334 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * This file is included twice in entry-common.S
+ * This file is included thrice in entry-common.S
*/
-#ifndef NR_syscalls
-#define NR_syscalls 328
-#else
-
-100:
-/* 0 */ .long sys_restart_syscall
- .long sys_exit
- .long sys_fork_wrapper
- .long sys_read
- .long sys_write
-/* 5 */ .long sys_open
- .long sys_close
- .long sys_ni_syscall /* was sys_waitpid */
- .long sys_creat
- .long sys_link
-/* 10 */ .long sys_unlink
- .long sys_execve_wrapper
- .long sys_chdir
- .long OBSOLETE(sys_time) /* used by libc4 */
- .long sys_mknod
-/* 15 */ .long sys_chmod
- .long sys_lchown16
- .long sys_ni_syscall /* was sys_break */
- .long sys_ni_syscall /* was sys_stat */
- .long sys_lseek
-/* 20 */ .long sys_getpid
- .long sys_mount
- .long OBSOLETE(sys_oldumount) /* used by libc4 */
- .long sys_setuid16
- .long sys_getuid16
-/* 25 */ .long OBSOLETE(sys_stime)
- .long sys_ptrace
- .long OBSOLETE(sys_alarm) /* used by libc4 */
- .long sys_ni_syscall /* was sys_fstat */
- .long sys_pause
-/* 30 */ .long OBSOLETE(sys_utime) /* used by libc4 */
- .long sys_ni_syscall /* was sys_stty */
- .long sys_ni_syscall /* was sys_getty */
- .long sys_access
- .long sys_nice
-/* 35 */ .long sys_ni_syscall /* was sys_ftime */
- .long sys_sync
- .long sys_kill
- .long sys_rename
- .long sys_mkdir
-/* 40 */ .long sys_rmdir
- .long sys_dup
- .long sys_pipe
- .long sys_times
- .long sys_ni_syscall /* was sys_prof */
-/* 45 */ .long sys_brk
- .long sys_setgid16
- .long sys_getgid16
- .long sys_ni_syscall /* was sys_signal */
- .long sys_geteuid16
-/* 50 */ .long sys_getegid16
- .long sys_acct
- .long sys_umount
- .long sys_ni_syscall /* was sys_lock */
- .long sys_ioctl
-/* 55 */ .long sys_fcntl
- .long sys_ni_syscall /* was sys_mpx */
- .long sys_setpgid
- .long sys_ni_syscall /* was sys_ulimit */
- .long sys_ni_syscall /* was sys_olduname */
-/* 60 */ .long sys_umask
- .long sys_chroot
- .long sys_ustat
- .long sys_dup2
- .long sys_getppid
-/* 65 */ .long sys_getpgrp
- .long sys_setsid
- .long sys_sigaction
- .long sys_ni_syscall /* was sys_sgetmask */
- .long sys_ni_syscall /* was sys_ssetmask */
-/* 70 */ .long sys_setreuid16
- .long sys_setregid16
- .long sys_sigsuspend_wrapper
- .long sys_sigpending
- .long sys_sethostname
-/* 75 */ .long sys_setrlimit
- .long OBSOLETE(sys_old_getrlimit) /* used by libc4 */
- .long sys_getrusage
- .long sys_gettimeofday
- .long sys_settimeofday
-/* 80 */ .long sys_getgroups16
- .long sys_setgroups16
- .long OBSOLETE(old_select) /* used by libc4 */
- .long sys_symlink
- .long sys_ni_syscall /* was sys_lstat */
-/* 85 */ .long sys_readlink
- .long sys_uselib
- .long sys_swapon
- .long sys_reboot
- .long OBSOLETE(old_readdir) /* used by libc4 */
-/* 90 */ .long OBSOLETE(old_mmap) /* used by libc4 */
- .long sys_munmap
- .long sys_truncate
- .long sys_ftruncate
- .long sys_fchmod
-/* 95 */ .long sys_fchown16
- .long sys_getpriority
- .long sys_setpriority
- .long sys_ni_syscall /* was sys_profil */
- .long sys_statfs
-/* 100 */ .long sys_fstatfs
- .long sys_ni_syscall
- .long OBSOLETE(sys_socketcall)
- .long sys_syslog
- .long sys_setitimer
-/* 105 */ .long sys_getitimer
- .long sys_newstat
- .long sys_newlstat
- .long sys_newfstat
- .long sys_ni_syscall /* was sys_uname */
-/* 110 */ .long sys_ni_syscall /* was sys_iopl */
- .long sys_vhangup
- .long sys_ni_syscall
- .long OBSOLETE(sys_syscall) /* call a syscall */
- .long sys_wait4
-/* 115 */ .long sys_swapoff
- .long sys_sysinfo
- .long OBSOLETE(ABI(sys_ipc, sys_oabi_ipc))
- .long sys_fsync
- .long sys_sigreturn_wrapper
-/* 120 */ .long sys_clone_wrapper
- .long sys_setdomainname
- .long sys_newuname
- .long sys_ni_syscall
- .long sys_adjtimex
-/* 125 */ .long sys_mprotect
- .long sys_sigprocmask
- .long sys_ni_syscall /* was sys_create_module */
- .long sys_init_module
- .long sys_delete_module
-/* 130 */ .long sys_ni_syscall /* was sys_get_kernel_syms */
- .long sys_quotactl
- .long sys_getpgid
- .long sys_fchdir
- .long sys_bdflush
-/* 135 */ .long sys_sysfs
- .long sys_personality
- .long sys_ni_syscall /* .long _sys_afs_syscall */
- .long sys_setfsuid16
- .long sys_setfsgid16
-/* 140 */ .long sys_llseek
- .long sys_getdents
- .long sys_select
- .long sys_flock
- .long sys_msync
-/* 145 */ .long sys_readv
- .long sys_writev
- .long sys_getsid
- .long sys_fdatasync
- .long sys_sysctl
-/* 150 */ .long sys_mlock
- .long sys_munlock
- .long sys_mlockall
- .long sys_munlockall
- .long sys_sched_setparam
-/* 155 */ .long sys_sched_getparam
- .long sys_sched_setscheduler
- .long sys_sched_getscheduler
- .long sys_sched_yield
- .long sys_sched_get_priority_max
-/* 160 */ .long sys_sched_get_priority_min
- .long sys_sched_rr_get_interval
- .long sys_nanosleep
- .long sys_arm_mremap
- .long sys_setresuid16
-/* 165 */ .long sys_getresuid16
- .long sys_ni_syscall
- .long sys_ni_syscall /* was sys_query_module */
- .long sys_poll
- .long sys_nfsservctl
-/* 170 */ .long sys_setresgid16
- .long sys_getresgid16
- .long sys_prctl
- .long sys_rt_sigreturn_wrapper
- .long sys_rt_sigaction
-/* 175 */ .long sys_rt_sigprocmask
- .long sys_rt_sigpending
- .long sys_rt_sigtimedwait
- .long sys_rt_sigqueueinfo
- .long sys_rt_sigsuspend_wrapper
-/* 180 */ .long ABI(sys_pread64, sys_oabi_pread64)
- .long ABI(sys_pwrite64, sys_oabi_pwrite64)
- .long sys_chown16
- .long sys_getcwd
- .long sys_capget
-/* 185 */ .long sys_capset
- .long sys_sigaltstack_wrapper
- .long sys_sendfile
- .long sys_ni_syscall
- .long sys_ni_syscall
-/* 190 */ .long sys_vfork_wrapper
- .long sys_getrlimit
- .long sys_mmap2
- .long ABI(sys_truncate64, sys_oabi_truncate64)
- .long ABI(sys_ftruncate64, sys_oabi_ftruncate64)
-/* 195 */ .long ABI(sys_stat64, sys_oabi_stat64)
- .long ABI(sys_lstat64, sys_oabi_lstat64)
- .long ABI(sys_fstat64, sys_oabi_fstat64)
- .long sys_lchown
- .long sys_getuid
-/* 200 */ .long sys_getgid
- .long sys_geteuid
- .long sys_getegid
- .long sys_setreuid
- .long sys_setregid
-/* 205 */ .long sys_getgroups
- .long sys_setgroups
- .long sys_fchown
- .long sys_setresuid
- .long sys_getresuid
-/* 210 */ .long sys_setresgid
- .long sys_getresgid
- .long sys_chown
- .long sys_setuid
- .long sys_setgid
-/* 215 */ .long sys_setfsuid
- .long sys_setfsgid
- .long sys_getdents64
- .long sys_pivot_root
- .long sys_mincore
-/* 220 */ .long sys_madvise
- .long ABI(sys_fcntl64, sys_oabi_fcntl64)
- .long sys_ni_syscall /* TUX */
- .long sys_ni_syscall
- .long sys_gettid
-/* 225 */ .long ABI(sys_readahead, sys_oabi_readahead)
- .long sys_setxattr
- .long sys_lsetxattr
- .long sys_fsetxattr
- .long sys_getxattr
-/* 230 */ .long sys_lgetxattr
- .long sys_fgetxattr
- .long sys_listxattr
- .long sys_llistxattr
- .long sys_flistxattr
-/* 235 */ .long sys_removexattr
- .long sys_lremovexattr
- .long sys_fremovexattr
- .long sys_tkill
- .long sys_sendfile64
-/* 240 */ .long sys_futex
- .long sys_sched_setaffinity
- .long sys_sched_getaffinity
- .long sys_io_setup
- .long sys_io_destroy
-/* 245 */ .long sys_io_getevents
- .long sys_io_submit
- .long sys_io_cancel
- .long sys_exit_group
- .long sys_lookup_dcookie
-/* 250 */ .long sys_epoll_create
- .long ABI(sys_epoll_ctl, sys_oabi_epoll_ctl)
- .long ABI(sys_epoll_wait, sys_oabi_epoll_wait)
- .long sys_remap_file_pages
- .long sys_ni_syscall /* sys_set_thread_area */
-/* 255 */ .long sys_ni_syscall /* sys_get_thread_area */
- .long sys_set_tid_address
- .long sys_timer_create
- .long sys_timer_settime
- .long sys_timer_gettime
-/* 260 */ .long sys_timer_getoverrun
- .long sys_timer_delete
- .long sys_clock_settime
- .long sys_clock_gettime
- .long sys_clock_getres
-/* 265 */ .long sys_clock_nanosleep
- .long sys_statfs64_wrapper
- .long sys_fstatfs64_wrapper
- .long sys_tgkill
- .long sys_utimes
-/* 270 */ .long sys_arm_fadvise64_64
- .long sys_pciconfig_iobase
- .long sys_pciconfig_read
- .long sys_pciconfig_write
- .long sys_mq_open
-/* 275 */ .long sys_mq_unlink
- .long sys_mq_timedsend
- .long sys_mq_timedreceive
- .long sys_mq_notify
- .long sys_mq_getsetattr
-/* 280 */ .long sys_waitid
- .long sys_socket
- .long sys_bind
- .long sys_connect
- .long sys_listen
-/* 285 */ .long sys_accept
- .long sys_getsockname
- .long sys_getpeername
- .long sys_socketpair
- .long sys_send
-/* 290 */ .long sys_sendto
- .long sys_recv
- .long sys_recvfrom
- .long sys_shutdown
- .long sys_setsockopt
-/* 295 */ .long sys_getsockopt
- .long sys_sendmsg
- .long sys_recvmsg
- .long ABI(sys_semop, sys_oabi_semop)
- .long sys_semget
-/* 300 */ .long sys_semctl
- .long sys_msgsnd
- .long sys_msgrcv
- .long sys_msgget
- .long sys_msgctl
-/* 305 */ .long sys_shmat
- .long sys_shmdt
- .long sys_shmget
- .long sys_shmctl
- .long sys_add_key
-/* 310 */ .long sys_request_key
- .long sys_keyctl
- .long ABI(sys_semtimedop, sys_oabi_semtimedop)
-/* vserver */ .long sys_ni_syscall
- .long sys_ioprio_set
-/* 315 */ .long sys_ioprio_get
- .long sys_inotify_init
- .long sys_inotify_add_watch
- .long sys_inotify_rm_watch
- .long sys_mbind
-/* 320 */ .long sys_get_mempolicy
- .long sys_set_mempolicy
-
- .rept NR_syscalls - (. - 100b) / 4
- .long sys_ni_syscall
- .endr
+/* 0 */ CALL(sys_restart_syscall)
+ CALL(sys_exit)
+ CALL(sys_fork_wrapper)
+ CALL(sys_read)
+ CALL(sys_write)
+/* 5 */ CALL(sys_open)
+ CALL(sys_close)
+ CALL(sys_ni_syscall) /* was sys_waitpid */
+ CALL(sys_creat)
+ CALL(sys_link)
+/* 10 */ CALL(sys_unlink)
+ CALL(sys_execve_wrapper)
+ CALL(sys_chdir)
+ CALL(OBSOLETE(sys_time)) /* used by libc4 */
+ CALL(sys_mknod)
+/* 15 */ CALL(sys_chmod)
+ CALL(sys_lchown16)
+ CALL(sys_ni_syscall) /* was sys_break */
+ CALL(sys_ni_syscall) /* was sys_stat */
+ CALL(sys_lseek)
+/* 20 */ CALL(sys_getpid)
+ CALL(sys_mount)
+ CALL(OBSOLETE(sys_oldumount)) /* used by libc4 */
+ CALL(sys_setuid16)
+ CALL(sys_getuid16)
+/* 25 */ CALL(OBSOLETE(sys_stime))
+ CALL(sys_ptrace)
+ CALL(OBSOLETE(sys_alarm)) /* used by libc4 */
+ CALL(sys_ni_syscall) /* was sys_fstat */
+ CALL(sys_pause)
+/* 30 */ CALL(OBSOLETE(sys_utime)) /* used by libc4 */
+ CALL(sys_ni_syscall) /* was sys_stty */
+ CALL(sys_ni_syscall) /* was sys_getty */
+ CALL(sys_access)
+ CALL(sys_nice)
+/* 35 */ CALL(sys_ni_syscall) /* was sys_ftime */
+ CALL(sys_sync)
+ CALL(sys_kill)
+ CALL(sys_rename)
+ CALL(sys_mkdir)
+/* 40 */ CALL(sys_rmdir)
+ CALL(sys_dup)
+ CALL(sys_pipe)
+ CALL(sys_times)
+ CALL(sys_ni_syscall) /* was sys_prof */
+/* 45 */ CALL(sys_brk)
+ CALL(sys_setgid16)
+ CALL(sys_getgid16)
+ CALL(sys_ni_syscall) /* was sys_signal */
+ CALL(sys_geteuid16)
+/* 50 */ CALL(sys_getegid16)
+ CALL(sys_acct)
+ CALL(sys_umount)
+ CALL(sys_ni_syscall) /* was sys_lock */
+ CALL(sys_ioctl)
+/* 55 */ CALL(sys_fcntl)
+ CALL(sys_ni_syscall) /* was sys_mpx */
+ CALL(sys_setpgid)
+ CALL(sys_ni_syscall) /* was sys_ulimit */
+ CALL(sys_ni_syscall) /* was sys_olduname */
+/* 60 */ CALL(sys_umask)
+ CALL(sys_chroot)
+ CALL(sys_ustat)
+ CALL(sys_dup2)
+ CALL(sys_getppid)
+/* 65 */ CALL(sys_getpgrp)
+ CALL(sys_setsid)
+ CALL(sys_sigaction)
+ CALL(sys_ni_syscall) /* was sys_sgetmask */
+ CALL(sys_ni_syscall) /* was sys_ssetmask */
+/* 70 */ CALL(sys_setreuid16)
+ CALL(sys_setregid16)
+ CALL(sys_sigsuspend_wrapper)
+ CALL(sys_sigpending)
+ CALL(sys_sethostname)
+/* 75 */ CALL(sys_setrlimit)
+ CALL(OBSOLETE(sys_old_getrlimit)) /* used by libc4 */
+ CALL(sys_getrusage)
+ CALL(sys_gettimeofday)
+ CALL(sys_settimeofday)
+/* 80 */ CALL(sys_getgroups16)
+ CALL(sys_setgroups16)
+ CALL(OBSOLETE(old_select)) /* used by libc4 */
+ CALL(sys_symlink)
+ CALL(sys_ni_syscall) /* was sys_lstat */
+/* 85 */ CALL(sys_readlink)
+ CALL(sys_uselib)
+ CALL(sys_swapon)
+ CALL(sys_reboot)
+ CALL(OBSOLETE(old_readdir)) /* used by libc4 */
+/* 90 */ CALL(OBSOLETE(old_mmap)) /* used by libc4 */
+ CALL(sys_munmap)
+ CALL(sys_truncate)
+ CALL(sys_ftruncate)
+ CALL(sys_fchmod)
+/* 95 */ CALL(sys_fchown16)
+ CALL(sys_getpriority)
+ CALL(sys_setpriority)
+ CALL(sys_ni_syscall) /* was sys_profil */
+ CALL(sys_statfs)
+/* 100 */ CALL(sys_fstatfs)
+ CALL(sys_ni_syscall)
+ CALL(OBSOLETE(sys_socketcall))
+ CALL(sys_syslog)
+ CALL(sys_setitimer)
+/* 105 */ CALL(sys_getitimer)
+ CALL(sys_newstat)
+ CALL(sys_newlstat)
+ CALL(sys_newfstat)
+ CALL(sys_ni_syscall) /* was sys_uname */
+/* 110 */ CALL(sys_ni_syscall) /* was sys_iopl */
+ CALL(sys_vhangup)
+ CALL(sys_ni_syscall)
+ CALL(OBSOLETE(sys_syscall)) /* call a syscall */
+ CALL(sys_wait4)
+/* 115 */ CALL(sys_swapoff)
+ CALL(sys_sysinfo)
+ CALL(OBSOLETE(ABI(sys_ipc, sys_oabi_ipc)))
+ CALL(sys_fsync)
+ CALL(sys_sigreturn_wrapper)
+/* 120 */ CALL(sys_clone_wrapper)
+ CALL(sys_setdomainname)
+ CALL(sys_newuname)
+ CALL(sys_ni_syscall)
+ CALL(sys_adjtimex)
+/* 125 */ CALL(sys_mprotect)
+ CALL(sys_sigprocmask)
+ CALL(sys_ni_syscall) /* was sys_create_module */
+ CALL(sys_init_module)
+ CALL(sys_delete_module)
+/* 130 */ CALL(sys_ni_syscall) /* was sys_get_kernel_syms */
+ CALL(sys_quotactl)
+ CALL(sys_getpgid)
+ CALL(sys_fchdir)
+ CALL(sys_bdflush)
+/* 135 */ CALL(sys_sysfs)
+ CALL(sys_personality)
+ CALL(sys_ni_syscall) /* CALL(_sys_afs_syscall) */
+ CALL(sys_setfsuid16)
+ CALL(sys_setfsgid16)
+/* 140 */ CALL(sys_llseek)
+ CALL(sys_getdents)
+ CALL(sys_select)
+ CALL(sys_flock)
+ CALL(sys_msync)
+/* 145 */ CALL(sys_readv)
+ CALL(sys_writev)
+ CALL(sys_getsid)
+ CALL(sys_fdatasync)
+ CALL(sys_sysctl)
+/* 150 */ CALL(sys_mlock)
+ CALL(sys_munlock)
+ CALL(sys_mlockall)
+ CALL(sys_munlockall)
+ CALL(sys_sched_setparam)
+/* 155 */ CALL(sys_sched_getparam)
+ CALL(sys_sched_setscheduler)
+ CALL(sys_sched_getscheduler)
+ CALL(sys_sched_yield)
+ CALL(sys_sched_get_priority_max)
+/* 160 */ CALL(sys_sched_get_priority_min)
+ CALL(sys_sched_rr_get_interval)
+ CALL(sys_nanosleep)
+ CALL(sys_arm_mremap)
+ CALL(sys_setresuid16)
+/* 165 */ CALL(sys_getresuid16)
+ CALL(sys_ni_syscall)
+ CALL(sys_ni_syscall) /* was sys_query_module */
+ CALL(sys_poll)
+ CALL(sys_nfsservctl)
+/* 170 */ CALL(sys_setresgid16)
+ CALL(sys_getresgid16)
+ CALL(sys_prctl)
+ CALL(sys_rt_sigreturn_wrapper)
+ CALL(sys_rt_sigaction)
+/* 175 */ CALL(sys_rt_sigprocmask)
+ CALL(sys_rt_sigpending)
+ CALL(sys_rt_sigtimedwait)
+ CALL(sys_rt_sigqueueinfo)
+ CALL(sys_rt_sigsuspend_wrapper)
+/* 180 */ CALL(ABI(sys_pread64, sys_oabi_pread64))
+ CALL(ABI(sys_pwrite64, sys_oabi_pwrite64))
+ CALL(sys_chown16)
+ CALL(sys_getcwd)
+ CALL(sys_capget)
+/* 185 */ CALL(sys_capset)
+ CALL(sys_sigaltstack_wrapper)
+ CALL(sys_sendfile)
+ CALL(sys_ni_syscall)
+ CALL(sys_ni_syscall)
+/* 190 */ CALL(sys_vfork_wrapper)
+ CALL(sys_getrlimit)
+ CALL(sys_mmap2)
+ CALL(ABI(sys_truncate64, sys_oabi_truncate64))
+ CALL(ABI(sys_ftruncate64, sys_oabi_ftruncate64))
+/* 195 */ CALL(ABI(sys_stat64, sys_oabi_stat64))
+ CALL(ABI(sys_lstat64, sys_oabi_lstat64))
+ CALL(ABI(sys_fstat64, sys_oabi_fstat64))
+ CALL(sys_lchown)
+ CALL(sys_getuid)
+/* 200 */ CALL(sys_getgid)
+ CALL(sys_geteuid)
+ CALL(sys_getegid)
+ CALL(sys_setreuid)
+ CALL(sys_setregid)
+/* 205 */ CALL(sys_getgroups)
+ CALL(sys_setgroups)
+ CALL(sys_fchown)
+ CALL(sys_setresuid)
+ CALL(sys_getresuid)
+/* 210 */ CALL(sys_setresgid)
+ CALL(sys_getresgid)
+ CALL(sys_chown)
+ CALL(sys_setuid)
+ CALL(sys_setgid)
+/* 215 */ CALL(sys_setfsuid)
+ CALL(sys_setfsgid)
+ CALL(sys_getdents64)
+ CALL(sys_pivot_root)
+ CALL(sys_mincore)
+/* 220 */ CALL(sys_madvise)
+ CALL(ABI(sys_fcntl64, sys_oabi_fcntl64))
+ CALL(sys_ni_syscall) /* TUX */
+ CALL(sys_ni_syscall)
+ CALL(sys_gettid)
+/* 225 */ CALL(ABI(sys_readahead, sys_oabi_readahead))
+ CALL(sys_setxattr)
+ CALL(sys_lsetxattr)
+ CALL(sys_fsetxattr)
+ CALL(sys_getxattr)
+/* 230 */ CALL(sys_lgetxattr)
+ CALL(sys_fgetxattr)
+ CALL(sys_listxattr)
+ CALL(sys_llistxattr)
+ CALL(sys_flistxattr)
+/* 235 */ CALL(sys_removexattr)
+ CALL(sys_lremovexattr)
+ CALL(sys_fremovexattr)
+ CALL(sys_tkill)
+ CALL(sys_sendfile64)
+/* 240 */ CALL(sys_futex)
+ CALL(sys_sched_setaffinity)
+ CALL(sys_sched_getaffinity)
+ CALL(sys_io_setup)
+ CALL(sys_io_destroy)
+/* 245 */ CALL(sys_io_getevents)
+ CALL(sys_io_submit)
+ CALL(sys_io_cancel)
+ CALL(sys_exit_group)
+ CALL(sys_lookup_dcookie)
+/* 250 */ CALL(sys_epoll_create)
+ CALL(ABI(sys_epoll_ctl, sys_oabi_epoll_ctl))
+ CALL(ABI(sys_epoll_wait, sys_oabi_epoll_wait))
+ CALL(sys_remap_file_pages)
+ CALL(sys_ni_syscall) /* sys_set_thread_area */
+/* 255 */ CALL(sys_ni_syscall) /* sys_get_thread_area */
+ CALL(sys_set_tid_address)
+ CALL(sys_timer_create)
+ CALL(sys_timer_settime)
+ CALL(sys_timer_gettime)
+/* 260 */ CALL(sys_timer_getoverrun)
+ CALL(sys_timer_delete)
+ CALL(sys_clock_settime)
+ CALL(sys_clock_gettime)
+ CALL(sys_clock_getres)
+/* 265 */ CALL(sys_clock_nanosleep)
+ CALL(sys_statfs64_wrapper)
+ CALL(sys_fstatfs64_wrapper)
+ CALL(sys_tgkill)
+ CALL(sys_utimes)
+/* 270 */ CALL(sys_arm_fadvise64_64)
+ CALL(sys_pciconfig_iobase)
+ CALL(sys_pciconfig_read)
+ CALL(sys_pciconfig_write)
+ CALL(sys_mq_open)
+/* 275 */ CALL(sys_mq_unlink)
+ CALL(sys_mq_timedsend)
+ CALL(sys_mq_timedreceive)
+ CALL(sys_mq_notify)
+ CALL(sys_mq_getsetattr)
+/* 280 */ CALL(sys_waitid)
+ CALL(sys_socket)
+ CALL(ABI(sys_bind, sys_oabi_bind))
+ CALL(ABI(sys_connect, sys_oabi_connect))
+ CALL(sys_listen)
+/* 285 */ CALL(sys_accept)
+ CALL(sys_getsockname)
+ CALL(sys_getpeername)
+ CALL(sys_socketpair)
+ CALL(sys_send)
+/* 290 */ CALL(ABI(sys_sendto, sys_oabi_sendto))
+ CALL(sys_recv)
+ CALL(sys_recvfrom)
+ CALL(sys_shutdown)
+ CALL(sys_setsockopt)
+/* 295 */ CALL(sys_getsockopt)
+ CALL(ABI(sys_sendmsg, sys_oabi_sendmsg))
+ CALL(sys_recvmsg)
+ CALL(ABI(sys_semop, sys_oabi_semop))
+ CALL(sys_semget)
+/* 300 */ CALL(sys_semctl)
+ CALL(sys_msgsnd)
+ CALL(sys_msgrcv)
+ CALL(sys_msgget)
+ CALL(sys_msgctl)
+/* 305 */ CALL(sys_shmat)
+ CALL(sys_shmdt)
+ CALL(sys_shmget)
+ CALL(sys_shmctl)
+ CALL(sys_add_key)
+/* 310 */ CALL(sys_request_key)
+ CALL(sys_keyctl)
+ CALL(ABI(sys_semtimedop, sys_oabi_semtimedop))
+/* vserver */ CALL(sys_ni_syscall)
+ CALL(sys_ioprio_set)
+/* 315 */ CALL(sys_ioprio_get)
+ CALL(sys_inotify_init)
+ CALL(sys_inotify_add_watch)
+ CALL(sys_inotify_rm_watch)
+ CALL(sys_mbind)
+/* 320 */ CALL(sys_get_mempolicy)
+ CALL(sys_set_mempolicy)
+#ifndef syscalls_counted
+.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
+#define syscalls_counted
#endif
+.rept syscalls_padding
+ CALL(sys_ni_syscall)
+.endr
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index d401d90..964cd71 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -333,10 +333,14 @@
@ from the exception stack
#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+#ifndef CONFIG_MMU
+#warning "NPTL on non MMU needs fixing"
+#else
@ make sure our user space atomic helper is aborted
cmp r2, #TASK_SIZE
bichs r3, r3, #PSR_Z_BIT
#endif
+#endif
@
@ We are now ready to fill in the remaining blanks on the stack:
@@ -705,7 +709,12 @@
* The C flag is also set if *ptr was changed to allow for assembly
* optimization in the calling code.
*
- * Note: this routine already includes memory barriers as needed.
+ * Notes:
+ *
+ * - This routine already includes memory barriers as needed.
+ *
+ * - A failure might be transient, i.e. it is possible, although unlikely,
+ * that "failure" be returned even if *ptr == oldval.
*
* For example, a user space atomic_add implementation could look like this:
*
@@ -756,12 +765,18 @@
* exception happening just after the str instruction which would
* clear the Z flag although the exchange was done.
*/
+#ifdef CONFIG_MMU
teq ip, ip @ set Z flag
ldr ip, [r2] @ load current val
add r3, r2, #1 @ prepare store ptr
teqeq ip, r0 @ compare with oldval if still allowed
streq r1, [r3, #-1]! @ store newval if still allowed
subs r0, r2, r3 @ if r2 == r3 the str occured
+#else
+#warning "NPTL on non MMU needs fixing"
+ mov r0, #-1
+ adds r0, r0, #0
+#endif
mov pc, lr
#else
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 2b92ce8..dbcb11a 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -87,7 +87,11 @@
b ret_slow_syscall
+ .equ NR_syscalls,0
+#define CALL(x) .equ NR_syscalls,NR_syscalls+1
#include "calls.S"
+#undef CALL
+#define CALL(x) .long x
/*=============================================================================
* SWI handler
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index eafa8e5..9d4b764 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -59,6 +59,16 @@
* struct sembuf loses its padding with EABI. Since arrays of them are
* used they have to be copyed to remove the padding. Compatibility wrappers
* provided below.
+ *
+ * sys_bind:
+ * sys_connect:
+ * sys_sendmsg:
+ * sys_sendto:
+ *
+ * struct sockaddr_un loses its padding with EABI. Since the size of the
+ * structure is used as a validation test in unix_mkname(), we need to
+ * change the length argument to 110 whenever it is 112. Compatibility
+ * wrappers provided below.
*/
#include <linux/syscalls.h>
@@ -67,6 +77,7 @@
#include <linux/fcntl.h>
#include <linux/eventpoll.h>
#include <linux/sem.h>
+#include <linux/socket.h>
#include <asm/ipc.h>
#include <asm/uaccess.h>
@@ -337,3 +348,63 @@
return sys_ipc(call, first, second, third, ptr, fifth);
}
}
+
+asmlinkage long sys_oabi_bind(int fd, struct sockaddr __user *addr, int addrlen)
+{
+ sa_family_t sa_family;
+ if (addrlen == 112 &&
+ get_user(sa_family, &addr->sa_family) == 0 &&
+ sa_family == AF_UNIX)
+ addrlen = 110;
+ return sys_bind(fd, addr, addrlen);
+}
+
+asmlinkage long sys_oabi_connect(int fd, struct sockaddr __user *addr, int addrlen)
+{
+ sa_family_t sa_family;
+ if (addrlen == 112 &&
+ get_user(sa_family, &addr->sa_family) == 0 &&
+ sa_family == AF_UNIX)
+ addrlen = 110;
+ return sys_connect(fd, addr, addrlen);
+}
+
+asmlinkage long sys_oabi_sendto(int fd, void __user *buff,
+ size_t len, unsigned flags,
+ struct sockaddr __user *addr,
+ int addrlen)
+{
+ sa_family_t sa_family;
+ if (addrlen == 112 &&
+ get_user(sa_family, &addr->sa_family) == 0 &&
+ sa_family == AF_UNIX)
+ addrlen = 110;
+ return sys_sendto(fd, buff, len, flags, addr, addrlen);
+}
+
+asmlinkage long sys_oabi_sendmsg(int fd, struct msghdr __user *msg, unsigned flags)
+{
+ struct sockaddr __user *addr;
+ int msg_namelen;
+ sa_family_t sa_family;
+ if (msg &&
+ get_user(msg_namelen, &msg->msg_namelen) == 0 &&
+ msg_namelen == 112 &&
+ get_user(addr, &msg->msg_name) == 0 &&
+ get_user(sa_family, &addr->sa_family) == 0 &&
+ sa_family == AF_UNIX)
+ {
+ /*
+ * HACK ALERT: there is a limit to how much backward bending
+ * we should do for what is actually a transitional
+ * compatibility layer. This already has known flaws with
+ * a few ioctls that we don't intend to fix. Therefore
+ * consider this blatent hack as another one... and take care
+ * to run for cover. In most cases it will "just work fine".
+ * If it doesn't, well, tough.
+ */
+ put_user(110, &msg->msg_namelen);
+ }
+ return sys_sendmsg(fd, msg, flags);
+}
+
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 0793dcf..0e2b641 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -24,6 +24,8 @@
config ARCH_CLEP7312
bool "CLEP7312"
+ help
+ Boards based on the Cirrus Logic 7212/7312 chips.
config ARCH_EDB7211
bool "EDB7211"
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index dc31e3f..8ab1b04 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -27,7 +27,6 @@
#include <asm/mach/arch.h>
#include <linux/interrupt.h>
#include "generic.h"
-#include <asm/serial.h>
static struct resource cs89x0_resources[] = {
[0] = {
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 3182017..a0724f2 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -469,7 +469,9 @@
if (fb->fb.var.bits_per_pixel <= 8)
val = CM_CTRL_LCDMUXSEL_VGA_8421BPP;
else if (fb->fb.var.bits_per_pixel <= 16)
- val = CM_CTRL_LCDMUXSEL_VGA_16BPP;
+ val = CM_CTRL_LCDMUXSEL_VGA_16BPP
+ | CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1
+ | CM_CTRL_STATIC1 | CM_CTRL_STATIC2;
else
val = 0; /* no idea for this, don't trust the docs */
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 9e5a13b..52fac89 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -106,6 +106,7 @@
{
ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
ixp2000_pci_preinit();
+ pcibios_setup("firmware");
}
static inline int enp2611_pci_valid_device(struct pci_bus *bus,
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 7c78240..0910127 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -68,6 +68,7 @@
{
ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
ixp2000_pci_preinit();
+ pcibios_setup("firmware");
}
int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys)
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 10f0660..150519f 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -212,6 +212,7 @@
{
ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000);
ixp2000_pci_preinit();
+ pcibios_setup("firmware");
}
#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
@@ -299,7 +300,9 @@
int __init ixdp2x01_pci_init(void)
{
- pci_common_init(&ixdp2x01_pci);
+ if (machine_is_ixdp2401() || machine_is_ixdp2801())
+ pci_common_init(&ixdp2x01_pci);
+
return 0;
}
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index bdc20b5..a177e78 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -30,6 +30,7 @@
static void __init omap_generic_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
}
@@ -104,7 +105,7 @@
static void __init omap_generic_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
}
MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 9533c36..89f0cc7 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -128,6 +128,7 @@
static void __init h2_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
h2_init_smc91x();
@@ -194,7 +195,7 @@
static void __init h2_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
}
MACHINE_START(OMAP_H2, "TI-H2")
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index d665efc..d9f3862 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -203,6 +203,7 @@
void h3_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
h3_init_smc91x();
@@ -210,7 +211,7 @@
static void __init h3_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
}
MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 652f37c..a04e433 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -181,6 +181,7 @@
void innovator_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
#ifdef CONFIG_ARCH_OMAP15XX
@@ -285,7 +286,7 @@
static void __init innovator_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c
index 58f7839..60d5f8a 100644
--- a/arch/arm/mach-omap1/board-netstar.c
+++ b/arch/arm/mach-omap1/board-netstar.c
@@ -65,6 +65,7 @@
static void __init netstar_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
@@ -108,7 +109,7 @@
static void __init netstar_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
}
#define MACHINE_PANICED 1
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e5d126e..543fa13 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -169,6 +169,7 @@
static void __init osk_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
osk_init_smc91x();
@@ -269,7 +270,7 @@
static void __init osk_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
}
MACHINE_START(OMAP_OSK, "TI-OSK")
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 67fada2..e488f72 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -34,6 +34,7 @@
static void __init omap_generic_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
}
@@ -72,7 +73,7 @@
static void __init omap_generic_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
}
MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 88708a0..3913a3c 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -144,6 +144,7 @@
void omap_perseus2_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
perseus2_init_smc91x();
@@ -160,7 +161,7 @@
static void __init omap_perseus2_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
iotable_init(omap_perseus2_io_desc,
ARRAY_SIZE(omap_perseus2_io_desc));
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 959b4b8..bfd5fdd 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -162,6 +162,7 @@
static void __init voiceblue_init_irq(void)
{
+ omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
@@ -206,7 +207,7 @@
static void __init voiceblue_map_io(void)
{
- omap_map_common_io();
+ omap1_map_common_io();
}
#define MACHINE_PANICED 1
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index a7a19f7..82d556b 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <asm/io.h>
#include <asm/arch/mux.h>
@@ -83,15 +84,24 @@
};
#endif
-static int initialized = 0;
-
-static void __init _omap_map_io(void)
+/*
+ * Maps common IO regions for omap1. This should only get called from
+ * board specific init.
+ */
+void __init omap1_map_common_io(void)
{
- initialized = 1;
-
- /* We have to initialize the IO space mapping before we can run
- * cpu_is_omapxxx() macros. */
iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
+
+ /* Normally devicemaps_init() would flush caches and tlb after
+ * mdesc->map_io(), but we must also do it here because of the CPU
+ * revision check below.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /* We want to check CPU revision early for cpu_is_omapxxxx() macros.
+ * IO space mapping must be initialized before we can do that.
+ */
omap_check_revision();
#ifdef CONFIG_ARCH_OMAP730
@@ -111,7 +121,14 @@
#endif
omap_sram_init();
+}
+/*
+ * Common low-level hardware init for omap1. This should only get called from
+ * board specific init.
+ */
+void __init omap1_init_common_hw()
+{
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
*/
@@ -121,16 +138,7 @@
/* Must init clocks early to assure that timer interrupt works
*/
omap1_clk_init();
-}
-/*
- * This should only get called from board specific init
- */
-void __init omap_map_common_io(void)
-{
- if (!initialized) {
- _omap_map_io();
- omap1_mux_init();
- }
+ omap1_mux_init();
}
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index b937123..eaecbf4 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -33,6 +33,7 @@
static void __init omap_generic_init_irq(void)
{
+ omap2_init_common_hw();
omap_init_irq();
}
@@ -64,7 +65,7 @@
static void __init omap_generic_map_io(void)
{
- omap_map_common_io();
+ omap2_map_common_io();
}
MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index c3c35d4..a300d63 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -136,6 +136,7 @@
static void __init omap_h4_init_irq(void)
{
+ omap2_init_common_hw();
omap_init_irq();
omap_gpio_init();
h4_init_smc91x();
@@ -181,7 +182,7 @@
static void __init omap_h4_map_io(void)
{
- omap_map_common_io();
+ omap2_map_common_io();
}
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index b41b1ef..3baa708 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -44,7 +44,7 @@
/* Read clkcfg register: it has turbo, b, half-turbo (and f) */
asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
- t = clkcfg & (1 << 1);
+ t = clkcfg & (1 << 0);
ht = clkcfg & (1 << 2);
b = clkcfg & (1 << 3);
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 4a222f5..4303d98 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -182,7 +182,7 @@
static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
{
void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
- void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC1_OFFSET;
+ void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
u32 val;
val = readl(sys_osc) & ~0x7ffff;
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index b4f1e05..1217bf0 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -10,9 +10,13 @@
obj-n :=
obj- :=
+# S3C2400 support files
+obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o
+
# S3C2410 support files
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
+obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
# Power Management support
@@ -25,6 +29,7 @@
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o
# bast extras
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index af2f3d5..08489ef 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -40,7 +40,6 @@
#include <linux/mutex.h>
#include <asm/hardware.h>
-#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/io.h>
@@ -59,22 +58,18 @@
void inline s3c24xx_clk_enable(unsigned int clocks, unsigned int enable)
{
unsigned long clkcon;
- unsigned long flags;
-
- local_irq_save(flags);
clkcon = __raw_readl(S3C2410_CLKCON);
- clkcon &= ~clocks;
if (enable)
clkcon |= clocks;
+ else
+ clkcon &= ~clocks;
/* ensure none of the special function bits set */
clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
__raw_writel(clkcon, S3C2410_CLKCON);
-
- local_irq_restore(flags);
}
/* enable and disable calls for use with the clk struct */
@@ -138,16 +133,32 @@
int clk_enable(struct clk *clk)
{
- if (IS_ERR(clk))
+ if (IS_ERR(clk) || clk == NULL)
return -EINVAL;
- return (clk->enable)(clk, 1);
+ clk_enable(clk->parent);
+
+ mutex_lock(&clocks_mutex);
+
+ if ((clk->usage++) == 0)
+ (clk->enable)(clk, 1);
+
+ mutex_unlock(&clocks_mutex);
+ return 0;
}
void clk_disable(struct clk *clk)
{
- if (!IS_ERR(clk))
+ if (IS_ERR(clk) || clk == NULL)
+ return;
+
+ mutex_lock(&clocks_mutex);
+
+ if ((--clk->usage) == 0)
(clk->enable)(clk, 0);
+
+ mutex_unlock(&clocks_mutex);
+ clk_disable(clk->parent);
}
@@ -361,6 +372,14 @@
if (clk->enable == NULL)
clk->enable = clk_null_enable;
+ /* if this is a standard clock, set the usage state */
+
+ if (clk->ctrlbit) {
+ unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
+
+ clk->usage = (clkcon & clk->ctrlbit) ? 1 : 0;
+ }
+
/* add to the list of available clocks */
mutex_lock(&clocks_mutex);
@@ -402,6 +421,8 @@
* the LCD clock if it is not needed.
*/
+ mutex_lock(&clocks_mutex);
+
s3c24xx_clk_enable(S3C2410_CLKCON_NAND, 0);
s3c24xx_clk_enable(S3C2410_CLKCON_USBH, 0);
s3c24xx_clk_enable(S3C2410_CLKCON_USBD, 0);
@@ -409,6 +430,8 @@
s3c24xx_clk_enable(S3C2410_CLKCON_IIC, 0);
s3c24xx_clk_enable(S3C2410_CLKCON_SPI, 0);
+ mutex_unlock(&clocks_mutex);
+
/* assume uart clocks are correctly setup */
/* register our clocks */
diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h
index 177d5c8..eb5c95d 100644
--- a/arch/arm/mach-s3c2410/clock.h
+++ b/arch/arm/mach-s3c2410/clock.h
@@ -16,6 +16,7 @@
struct clk *parent;
const char *name;
int id;
+ int usage;
unsigned long rate;
unsigned long ctrlbit;
int (*enable)(struct clk *, int enable);
diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c
index 687fe37..00a3793 100644
--- a/arch/arm/mach-s3c2410/cpu.c
+++ b/arch/arm/mach-s3c2410/cpu.c
@@ -40,6 +40,7 @@
#include "cpu.h"
#include "clock.h"
+#include "s3c2400.h"
#include "s3c2410.h"
#include "s3c2440.h"
@@ -55,6 +56,7 @@
/* table of supported CPUs */
+static const char name_s3c2400[] = "S3C2400";
static const char name_s3c2410[] = "S3C2410";
static const char name_s3c2440[] = "S3C2440";
static const char name_s3c2410a[] = "S3C2410A";
@@ -96,7 +98,16 @@
.init_uarts = s3c2440_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440a
- }
+ },
+ {
+ .idcode = 0x0, /* S3C2400 doesn't have an idcode */
+ .idmask = 0xffffffff,
+ .map_io = s3c2400_map_io,
+ .init_clocks = s3c2400_init_clocks,
+ .init_uarts = s3c2400_init_uarts,
+ .init = s3c2400_init,
+ .name = name_s3c2400
+ },
};
/* minimal IO mapping */
@@ -148,12 +159,15 @@
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
- unsigned long idcode;
+ unsigned long idcode = 0x0;
/* initialise the io descriptors we need for initialisation */
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+#ifndef CONFIG_CPU_S3C2400
idcode = __raw_readl(S3C2410_GSTATUS1);
+#endif
+
cpu = s3c_lookup_cpu(idcode);
if (cpu == NULL) {
diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h
index 9cbe5ee..fc10677 100644
--- a/arch/arm/mach-s3c2410/cpu.h
+++ b/arch/arm/mach-s3c2410/cpu.h
@@ -17,11 +17,12 @@
* 14-Jan-2005 BJD Added s3c24xx_init_clocks() call
* 10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ} & IODESC_ENT
* 14-Mar-2005 BJD Updated for __iomem
+ * 15-Jan-2006 LCVR Updated S3C2410_PA_##x to new S3C24XX_PA_##x macro
*/
/* todo - fix when rmk changes iodescs to use `void __iomem *` */
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C2410_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
#define MHZ (1000*1000)
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index f58406e..0a47d38 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*
* Modifications:
+ * 15-Jan-2006 LCVR Using S3C24XX_PA_##x macro for common S3C24XX devices
* 10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ}
* 10-Feb-2005 BJD Added camera from guillaume.gourat@nexvision.tv
* 29-Aug-2004 BJD Added timers 0 through 3
@@ -46,8 +47,8 @@
static struct resource s3c_usb_resource[] = {
[0] = {
- .start = S3C2410_PA_USBHOST,
- .end = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
+ .start = S3C24XX_PA_USBHOST,
+ .end = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -76,8 +77,8 @@
static struct resource s3c_lcd_resource[] = {
[0] = {
- .start = S3C2410_PA_LCD,
- .end = S3C2410_PA_LCD + S3C24XX_SZ_LCD - 1,
+ .start = S3C24XX_PA_LCD,
+ .end = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -139,8 +140,8 @@
static struct resource s3c_usbgadget_resource[] = {
[0] = {
- .start = S3C2410_PA_USBDEV,
- .end = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
+ .start = S3C24XX_PA_USBDEV,
+ .end = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -164,8 +165,8 @@
static struct resource s3c_wdt_resource[] = {
[0] = {
- .start = S3C2410_PA_WATCHDOG,
- .end = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
+ .start = S3C24XX_PA_WATCHDOG,
+ .end = S3C24XX_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -189,8 +190,8 @@
static struct resource s3c_i2c_resource[] = {
[0] = {
- .start = S3C2410_PA_IIC,
- .end = S3C2410_PA_IIC + S3C24XX_SZ_IIC - 1,
+ .start = S3C24XX_PA_IIC,
+ .end = S3C24XX_PA_IIC + S3C24XX_SZ_IIC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -214,8 +215,8 @@
static struct resource s3c_iis_resource[] = {
[0] = {
- .start = S3C2410_PA_IIS,
- .end = S3C2410_PA_IIS + S3C24XX_SZ_IIS -1,
+ .start = S3C24XX_PA_IIS,
+ .end = S3C24XX_PA_IIS + S3C24XX_SZ_IIS -1,
.flags = IORESOURCE_MEM,
}
};
@@ -239,8 +240,8 @@
static struct resource s3c_rtc_resource[] = {
[0] = {
- .start = S3C2410_PA_RTC,
- .end = S3C2410_PA_RTC + 0xff,
+ .start = S3C24XX_PA_RTC,
+ .end = S3C24XX_PA_RTC + 0xff,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -268,12 +269,17 @@
static struct resource s3c_adc_resource[] = {
[0] = {
- .start = S3C2410_PA_ADC,
- .end = S3C2410_PA_ADC + S3C24XX_SZ_ADC - 1,
+ .start = S3C24XX_PA_ADC,
+ .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_TC,
+ .end = IRQ_TC,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_ADC,
.end = IRQ_ADC,
.flags = IORESOURCE_IRQ,
}
@@ -316,8 +322,8 @@
static struct resource s3c_spi0_resource[] = {
[0] = {
- .start = S3C2410_PA_SPI,
- .end = S3C2410_PA_SPI + 0x1f,
+ .start = S3C24XX_PA_SPI,
+ .end = S3C24XX_PA_SPI + 0x1f,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -341,8 +347,8 @@
static struct resource s3c_spi1_resource[] = {
[0] = {
- .start = S3C2410_PA_SPI + 0x20,
- .end = S3C2410_PA_SPI + 0x20 + 0x1f,
+ .start = S3C24XX_PA_SPI + 0x20,
+ .end = S3C24XX_PA_SPI + 0x20 + 0x1f,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -366,8 +372,8 @@
static struct resource s3c_timer0_resource[] = {
[0] = {
- .start = S3C2410_PA_TIMER + 0x0C,
- .end = S3C2410_PA_TIMER + 0x0C + 0xB,
+ .start = S3C24XX_PA_TIMER + 0x0C,
+ .end = S3C24XX_PA_TIMER + 0x0C + 0xB,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -391,8 +397,8 @@
static struct resource s3c_timer1_resource[] = {
[0] = {
- .start = S3C2410_PA_TIMER + 0x18,
- .end = S3C2410_PA_TIMER + 0x23,
+ .start = S3C24XX_PA_TIMER + 0x18,
+ .end = S3C24XX_PA_TIMER + 0x23,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -416,8 +422,8 @@
static struct resource s3c_timer2_resource[] = {
[0] = {
- .start = S3C2410_PA_TIMER + 0x24,
- .end = S3C2410_PA_TIMER + 0x2F,
+ .start = S3C24XX_PA_TIMER + 0x24,
+ .end = S3C24XX_PA_TIMER + 0x2F,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -441,8 +447,8 @@
static struct resource s3c_timer3_resource[] = {
[0] = {
- .start = S3C2410_PA_TIMER + 0x30,
- .end = S3C2410_PA_TIMER + 0x3B,
+ .start = S3C24XX_PA_TIMER + 0x30,
+ .end = S3C24XX_PA_TIMER + 0x3B,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 65feaf2..4dbd8e7 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -1152,7 +1152,7 @@
printk("S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics\n");
- dma_base = ioremap(S3C2410_PA_DMA, 0x200);
+ dma_base = ioremap(S3C24XX_PA_DMA, 0x200);
if (dma_base == NULL) {
printk(KERN_ERR "dma failed to remap register block\n");
return -ENOMEM;
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 23ea3d5..cd39e86 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -31,6 +31,7 @@
* 05-Nov-2004 BJD EXPORT_SYMBOL() added for all code
* 13-Mar-2005 BJD Updates for __iomem
* 26-Oct-2005 BJD Added generic configuration types
+ * 15-Jan-2006 LCVR Added support for the S3C2400
*/
@@ -48,7 +49,7 @@
void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
{
- void __iomem *base = S3C2410_GPIO_BASE(pin);
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
unsigned long mask;
unsigned long con;
unsigned long flags;
@@ -95,7 +96,7 @@
unsigned int s3c2410_gpio_getcfg(unsigned int pin)
{
- void __iomem *base = S3C2410_GPIO_BASE(pin);
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
unsigned long mask;
if (pin < S3C2410_GPIO_BANKB) {
@@ -111,7 +112,7 @@
void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
{
- void __iomem *base = S3C2410_GPIO_BASE(pin);
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
unsigned long offs = S3C2410_GPIO_OFFSET(pin);
unsigned long flags;
unsigned long up;
@@ -133,7 +134,7 @@
void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
{
- void __iomem *base = S3C2410_GPIO_BASE(pin);
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
unsigned long offs = S3C2410_GPIO_OFFSET(pin);
unsigned long flags;
unsigned long dat;
@@ -152,7 +153,7 @@
unsigned int s3c2410_gpio_getpin(unsigned int pin)
{
- void __iomem *base = S3C2410_GPIO_BASE(pin);
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
unsigned long offs = S3C2410_GPIO_OFFSET(pin);
return __raw_readl(base + 0x04) & (1<< offs);
@@ -166,70 +167,13 @@
unsigned long misccr;
local_irq_save(flags);
- misccr = __raw_readl(S3C2410_MISCCR);
+ misccr = __raw_readl(S3C24XX_MISCCR);
misccr &= ~clear;
misccr ^= change;
- __raw_writel(misccr, S3C2410_MISCCR);
+ __raw_writel(misccr, S3C24XX_MISCCR);
local_irq_restore(flags);
return misccr;
}
EXPORT_SYMBOL(s3c2410_modify_misccr);
-
-int s3c2410_gpio_getirq(unsigned int pin)
-{
- if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15_EINT23)
- return -1; /* not valid interrupts */
-
- if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
- return -1; /* not valid pin */
-
- if (pin < S3C2410_GPF4)
- return (pin - S3C2410_GPF0) + IRQ_EINT0;
-
- if (pin < S3C2410_GPG0)
- return (pin - S3C2410_GPF4) + IRQ_EINT4;
-
- return (pin - S3C2410_GPG0) + IRQ_EINT8;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getirq);
-
-int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config)
-{
- void __iomem *reg = S3C2410_EINFLT0;
- unsigned long flags;
- unsigned long val;
-
- if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
- return -1;
-
- config &= 0xff;
-
- pin -= S3C2410_GPG8_EINT16;
- reg += pin & ~3;
-
- local_irq_save(flags);
-
- /* update filter width and clock source */
-
- val = __raw_readl(reg);
- val &= ~(0xff << ((pin & 3) * 8));
- val |= config << ((pin & 3) * 8);
- __raw_writel(val, reg);
-
- /* update filter enable */
-
- val = __raw_readl(S3C2410_EXTINT2);
- val &= ~(1 << ((pin * 4) + 3));
- val |= on << ((pin * 4) + 3);
- __raw_writel(val, S3C2410_EXTINT2);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
diff --git a/arch/arm/mach-s3c2410/s3c2400-gpio.c b/arch/arm/mach-s3c2410/s3c2400-gpio.c
new file mode 100644
index 0000000..5127f39
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2400-gpio.c
@@ -0,0 +1,45 @@
+/* linux/arch/arm/mach-s3c2410/gpio.c
+ *
+ * Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org>
+ *
+ * S3C2400 GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Changelog
+ * 15-Jan-2006 LCVR Splitted from gpio.c, adding support for the S3C2400
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-gpio.h>
+
+int s3c2400_gpio_getirq(unsigned int pin)
+{
+ if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7)
+ return -1; /* not valid interrupts */
+
+ return (pin - S3C2410_GPE0) + IRQ_EINT0;
+}
+
+EXPORT_SYMBOL(s3c2400_gpio_getirq);
diff --git a/arch/arm/mach-s3c2410/s3c2410-gpio.c b/arch/arm/mach-s3c2410/s3c2410-gpio.c
new file mode 100644
index 0000000..d5e1cae
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2410-gpio.c
@@ -0,0 +1,93 @@
+/* linux/arch/arm/mach-s3c2410/gpio.c
+ *
+ * Copyright (c) 2004-2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Changelog
+ * 15-Jan-2006 LCVR Splitted from gpio.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-gpio.h>
+
+int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+ unsigned int config)
+{
+ void __iomem *reg = S3C2410_EINFLT0;
+ unsigned long flags;
+ unsigned long val;
+
+ if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
+ return -1;
+
+ config &= 0xff;
+
+ pin -= S3C2410_GPG8_EINT16;
+ reg += pin & ~3;
+
+ local_irq_save(flags);
+
+ /* update filter width and clock source */
+
+ val = __raw_readl(reg);
+ val &= ~(0xff << ((pin & 3) * 8));
+ val |= config << ((pin & 3) * 8);
+ __raw_writel(val, reg);
+
+ /* update filter enable */
+
+ val = __raw_readl(S3C2410_EXTINT2);
+ val &= ~(1 << ((pin * 4) + 3));
+ val |= on << ((pin * 4) + 3);
+ __raw_writel(val, S3C2410_EXTINT2);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
+
+int s3c2410_gpio_getirq(unsigned int pin)
+{
+ if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15_EINT23)
+ return -1; /* not valid interrupts */
+
+ if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
+ return -1; /* not valid pin */
+
+ if (pin < S3C2410_GPF4)
+ return (pin - S3C2410_GPF0) + IRQ_EINT0;
+
+ if (pin < S3C2410_GPG0)
+ return (pin - S3C2410_GPF4) + IRQ_EINT4;
+
+ return (pin - S3C2410_GPG0) + IRQ_EINT8;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getirq);
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 61768dac..832fb86 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -72,7 +72,7 @@
@@ prepare cpu to sleep
ldr r4, =S3C2410_REFRESH
- ldr r5, =S3C2410_MISCCR
+ ldr r5, =S3C24XX_MISCCR
ldr r6, =S3C2410_CLKCON
ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB)
ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB)
@@ -133,12 +133,12 @@
@@ load UART to allow us to print the two characters for
@@ resume debug
- mov r2, #S3C2410_PA_UART & 0xff000000
- orr r2, r2, #S3C2410_PA_UART & 0xff000
+ mov r2, #S3C24XX_PA_UART & 0xff000000
+ orr r2, r2, #S3C24XX_PA_UART & 0xff000
#if 0
/* SMDK2440 LED set */
- mov r14, #S3C2410_PA_GPIO
+ mov r14, #S3C24XX_PA_GPIO
ldr r12, [ r14, #0x54 ]
bic r12, r12, #3<<4
orr r12, r12, #1<<7
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 72966d9..d921c10 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -92,22 +92,16 @@
* - the Icache does not read data from the write buffer
*/
ENTRY(v6_coherent_user_range)
- bic r0, r0, #CACHE_LINE_SIZE - 1
-1:
+
#ifdef HARVARD_CACHE
- mcr p15, 0, r0, c7, c10, 1 @ clean D line
+ bic r0, r0, #CACHE_LINE_SIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D line
mcr p15, 0, r0, c7, c5, 1 @ invalidate I line
-#endif
- mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry
- add r0, r0, #BTB_FLUSH_SIZE
- mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry
- add r0, r0, #BTB_FLUSH_SIZE
- mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry
- add r0, r0, #BTB_FLUSH_SIZE
- mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry
- add r0, r0, #BTB_FLUSH_SIZE
+ add r0, r0, #CACHE_LINE_SIZE
cmp r0, r1
blo 1b
+#endif
+ mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
#ifdef HARVARD_CACHE
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index de3ce1e..da9b359 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -142,7 +142,7 @@
return NULL;
addr = (unsigned long)area->addr;
if (remap_area_pages(addr, pfn, size, flags)) {
- vfree(addr);
+ vfree((void *)addr);
return NULL;
}
return (void __iomem *) (offset + (char *)addr);
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index d0245a3..ef8d30a 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -343,6 +343,12 @@
PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE |
PMD_SECT_TEX(1),
.domain = DOMAIN_IO,
+ },
+ [MT_NONSHARED_DEVICE] = {
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_NONSHARED_DEV |
+ PMD_SECT_AP_WRITE,
+ .domain = DOMAIN_IO,
}
};
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 861b3594..2d3823e 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -241,7 +241,15 @@
* it also trashes the mini I-cache used by JTAG debuggers.
*/
ENTRY(xscale_coherent_kern_range)
- /* FALLTHROUGH */
+ bic r0, r0, #CACHELINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
/*
* coherent_user_range(start, end)
@@ -252,18 +260,16 @@
*
* - start - virtual start address
* - end - virtual end address
- *
- * Note: single I-cache line invalidation isn't used here since
- * it also trashes the mini I-cache used by JTAG debuggers.
*/
ENTRY(xscale_coherent_user_range)
bic r0, r0, #CACHELINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c5, 1 @ Invalidate I cache entry
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
mov r0, #0
- mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
+ mcr p15, 0, r0, c7, c5, 6 @ Invalidate BTB
mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
mov pc, lr
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index 1415930..6f8bc1f 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -137,8 +137,9 @@
if (spec) {
init_MUTEX(&op_arm_sem);
- if (spec->init() < 0)
- return -ENODEV;
+ ret = spec->init();
+ if (ret < 0)
+ return ret;
op_arm_model = spec;
init_driverfs();
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 792f663..ee82763 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <asm/mach/map.h>
+#include <asm/tlb.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
@@ -96,6 +97,14 @@
omap_sram_io_desc[0].length);
/*
+ * Normally devicemaps_init() would flush caches and tlb after
+ * mdesc->map_io(), but since we're called from map_io(), we
+ * must do it here.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /*
* Looks like we need to preserve some bootloader code at the
* beginning of SRAM for jumping to flash for reboot to work...
*/
diff --git a/arch/arm26/Kconfig b/arch/arm26/Kconfig
index 274e070..dee23d8 100644
--- a/arch/arm26/Kconfig
+++ b/arch/arm26/Kconfig
@@ -53,14 +53,14 @@
config ARCH_MAY_HAVE_PC_FDC
bool
- default y
source "init/Kconfig"
menu "System Type"
-comment "Archimedes/A5000 Implementations (select only ONE)"
+choice
+ prompt "Archimedes/A5000 Implementations"
config ARCH_ARC
bool "Archimedes"
@@ -73,6 +73,7 @@
config ARCH_A5K
bool "A5000"
+ select ARCH_MAY_HAVE_PC_FDC
help
Say Y here to to support the Acorn A5000.
@@ -87,6 +88,7 @@
Say Y here if your Archimedes or A5000 system has only 2MB of
memory, otherwise say N. The resulting kernel will not run on a
machine with 4MB of memory.
+endchoice
endmenu
config ISA_DMA_API
diff --git a/arch/arm26/kernel/fiq.c b/arch/arm26/kernel/fiq.c
index 08a97c9..a24272b 100644
--- a/arch/arm26/kernel/fiq.c
+++ b/arch/arm26/kernel/fiq.c
@@ -104,14 +104,14 @@
{
register unsigned long tmp, tmp2;
__asm__ volatile (
- "mov %0, pc
- bic %1, %0, #0x3
- orr %1, %1, %3
- teqp %1, #0 @ select FIQ mode
- mov r0, r0
- ldmia %2, {r8 - r14}
- teqp %0, #0 @ return to SVC mode
- mov r0, r0"
+ "mov %0, pc \n"
+ "bic %1, %0, #0x3 \n"
+ "orr %1, %1, %3 \n"
+ "teqp %1, #0 @ select FIQ mode \n"
+ "mov r0, r0 \n"
+ "ldmia %2, {r8 - r14} \n"
+ "teqp %0, #0 @ return to SVC mode \n"
+ "mov r0, r0 "
: "=&r" (tmp), "=&r" (tmp2)
: "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | MODE_FIQ26)
/* These registers aren't modified by the above code in a way
@@ -125,14 +125,14 @@
{
register unsigned long tmp, tmp2;
__asm__ volatile (
- "mov %0, pc
- bic %1, %0, #0x3
- orr %1, %1, %3
- teqp %1, #0 @ select FIQ mode
- mov r0, r0
- stmia %2, {r8 - r14}
- teqp %0, #0 @ return to SVC mode
- mov r0, r0"
+ "mov %0, pc \n"
+ "bic %1, %0, #0x3 \n"
+ "orr %1, %1, %3 \n"
+ "teqp %1, #0 @ select FIQ mode \n"
+ "mov r0, r0 \n"
+ "stmia %2, {r8 - r14} \n"
+ "teqp %0, #0 @ return to SVC mode \n"
+ "mov r0, r0 "
: "=&r" (tmp), "=&r" (tmp2)
: "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | MODE_FIQ26)
/* These registers aren't modified by the above code in a way
diff --git a/arch/arm26/kernel/signal.c b/arch/arm26/kernel/signal.c
index ce2055b..2a48c12 100644
--- a/arch/arm26/kernel/signal.c
+++ b/arch/arm26/kernel/signal.c
@@ -480,6 +480,7 @@
{
siginfo_t info;
int signr;
+ struct k_sigaction ka;
/*
* We want the common case to go fast, which
@@ -493,7 +494,7 @@
if (current->ptrace & PT_SINGLESTEP)
ptrace_cancel_bpt(current);
- signr = get_signal_to_deliver(&info, regs, NULL);
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
handle_signal(signr, &info, oldset, regs, syscall);
if (current->ptrace & PT_SINGLESTEP)
diff --git a/arch/cris/Makefile b/arch/cris/Makefile
index ea65d58..ee11469 100644
--- a/arch/cris/Makefile
+++ b/arch/cris/Makefile
@@ -119,7 +119,7 @@
@ln -sfn $(SRC_ARCH)/$(SARCH)/lib $(SRC_ARCH)/lib
@ln -sfn $(SRC_ARCH)/$(SARCH) $(SRC_ARCH)/arch
@ln -sfn $(SRC_ARCH)/$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S
- @ln -sfn $(SRC_ARCH)/$(SARCH)/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c
+ @ln -sfn $(SRC_ARCH)/$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c
@touch $@
# Create link to sub arch includes
diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c
index f214f74..961c0d5 100644
--- a/arch/cris/arch-v10/kernel/ptrace.c
+++ b/arch/cris/arch-v10/kernel/ptrace.c
@@ -202,18 +202,18 @@
int i;
unsigned long tmp;
+ ret = 0;
for (i = 0; i <= PT_MAX; i++) {
tmp = get_reg(child, i);
if (put_user(tmp, datap)) {
ret = -EFAULT;
- goto out_tsk;
+ break;
}
data += sizeof(long);
}
- ret = 0;
break;
}
@@ -222,10 +222,11 @@
int i;
unsigned long tmp;
+ ret = 0;
for (i = 0; i <= PT_MAX; i++) {
if (get_user(tmp, datap)) {
ret = -EFAULT;
- goto out_tsk;
+ break;
}
if (i == PT_DCCR) {
@@ -237,7 +238,6 @@
data += sizeof(long);
}
- ret = 0;
break;
}
diff --git a/arch/cris/kernel/setup.c b/arch/cris/kernel/setup.c
index d11206e..1ba57ef 100644
--- a/arch/cris/kernel/setup.c
+++ b/arch/cris/kernel/setup.c
@@ -24,7 +24,6 @@
/*
* Setup options
*/
-struct drive_info_struct { char dummy[32]; } drive_info;
struct screen_info screen_info;
extern int root_mountflags;
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index cbde675..0afec85 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -47,15 +47,6 @@
source "init/Kconfig"
-config DOUBLEFAULT
- default y
- bool "Enable doublefault exception handler" if EMBEDDED
- help
- This option allows trapping of rare doublefault exceptions that
- would otherwise cause a system to silently reboot. Disabling this
- option saves about 4k and might cause you much additional grey
- hair.
-
menu "Processor type and features"
choice
@@ -451,12 +442,50 @@
config HIGHMEM64G
bool "64GB"
+ depends on X86_CMPXCHG64
help
Select this if you have a 32-bit processor and more than 4
gigabytes of physical RAM.
endchoice
+choice
+ depends on EXPERIMENTAL && !X86_PAE
+ prompt "Memory split"
+ default VMSPLIT_3G
+ help
+ Select the desired split between kernel and user memory.
+
+ If the address range available to the kernel is less than the
+ physical memory installed, the remaining memory will be available
+ as "high memory". Accessing high memory is a little more costly
+ than low memory, as it needs to be mapped into the kernel first.
+ Note that increasing the kernel address space limits the range
+ available to user programs, making the address space there
+ tighter. Selecting anything other than the default 3G/1G split
+ will also likely make your kernel incompatible with binary-only
+ kernel modules.
+
+ If you are not absolutely sure what you are doing, leave this
+ option alone!
+
+ config VMSPLIT_3G
+ bool "3G/1G user/kernel split"
+ config VMSPLIT_3G_OPT
+ bool "3G/1G user/kernel split (for full 1G low memory)"
+ config VMSPLIT_2G
+ bool "2G/2G user/kernel split"
+ config VMSPLIT_1G
+ bool "1G/3G user/kernel split"
+endchoice
+
+config PAGE_OFFSET
+ hex
+ default 0xB0000000 if VMSPLIT_3G_OPT
+ default 0x78000000 if VMSPLIT_2G
+ default 0x40000000 if VMSPLIT_1G
+ default 0xC0000000
+
config HIGHMEM
bool
depends on HIGHMEM64G || HIGHMEM4G
@@ -711,6 +740,15 @@
Say N.
+config DOUBLEFAULT
+ default y
+ bool "Enable doublefault exception handler" if EMBEDDED
+ help
+ This option allows trapping of rare doublefault exceptions that
+ would otherwise cause a system to silently reboot. Disabling this
+ option saves about 4k and might cause you much additional grey
+ hair.
+
endmenu
diff --git a/arch/i386/kernel/acpi/Makefile b/arch/i386/kernel/acpi/Makefile
index 267ca48..d51c731 100644
--- a/arch/i386/kernel/acpi/Makefile
+++ b/arch/i386/kernel/acpi/Makefile
@@ -3,6 +3,6 @@
obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
ifneq ($(CONFIG_ACPI_PROCESSOR),)
-obj-y += cstate.o
+obj-y += cstate.o processor.o
endif
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index 2111529..79577f0 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -248,10 +248,17 @@
acpi_table_print_madt_entry(header);
- /* Register even disabled CPUs for cpu hotplug */
+ /* Record local apic id only when enabled */
+ if (processor->flags.enabled)
+ x86_acpiid_to_apicid[processor->acpi_id] = processor->id;
- x86_acpiid_to_apicid[processor->acpi_id] = processor->id;
-
+ /*
+ * We need to register disabled CPU as well to permit
+ * counting disabled CPUs. This allows us to size
+ * cpus_possible_map more accurately, to permit
+ * to not preallocating memory for all NR_CPUS
+ * when we use CPU hotplug.
+ */
mp_register_lapic(processor->id, /* APIC ID */
processor->flags.enabled); /* Enabled? */
@@ -464,7 +471,7 @@
* success: return IRQ number (>=0)
* failure: return < 0
*/
-int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
+int acpi_register_gsi(u32 gsi, int triggering, int polarity)
{
unsigned int irq;
unsigned int plat_gsi = gsi;
@@ -476,14 +483,14 @@
if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
extern void eisa_set_level_irq(unsigned int irq);
- if (edge_level == ACPI_LEVEL_SENSITIVE)
+ if (triggering == ACPI_LEVEL_SENSITIVE)
eisa_set_level_irq(gsi);
}
#endif
#ifdef CONFIG_X86_IO_APIC
if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
- plat_gsi = mp_register_gsi(gsi, edge_level, active_high_low);
+ plat_gsi = mp_register_gsi(gsi, triggering, polarity);
}
#endif
acpi_gsi_to_irq(plat_gsi, &irq);
diff --git a/arch/i386/kernel/acpi/cstate.c b/arch/i386/kernel/acpi/cstate.c
index 4c3036b..25db49e 100644
--- a/arch/i386/kernel/acpi/cstate.c
+++ b/arch/i386/kernel/acpi/cstate.c
@@ -14,64 +14,6 @@
#include <acpi/processor.h>
#include <asm/acpi.h>
-static void acpi_processor_power_init_intel_pdc(struct acpi_processor_power
- *pow)
-{
- struct acpi_object_list *obj_list;
- union acpi_object *obj;
- u32 *buf;
-
- /* allocate and initialize pdc. It will be used later. */
- obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
- if (!obj_list) {
- printk(KERN_ERR "Memory allocation error\n");
- return;
- }
-
- obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
- if (!obj) {
- printk(KERN_ERR "Memory allocation error\n");
- kfree(obj_list);
- return;
- }
-
- buf = kmalloc(12, GFP_KERNEL);
- if (!buf) {
- printk(KERN_ERR "Memory allocation error\n");
- kfree(obj);
- kfree(obj_list);
- return;
- }
-
- buf[0] = ACPI_PDC_REVISION_ID;
- buf[1] = 1;
- buf[2] = ACPI_PDC_C_CAPABILITY_SMP;
-
- obj->type = ACPI_TYPE_BUFFER;
- obj->buffer.length = 12;
- obj->buffer.pointer = (u8 *) buf;
- obj_list->count = 1;
- obj_list->pointer = obj;
- pow->pdc = obj_list;
-
- return;
-}
-
-/* Initialize _PDC data based on the CPU vendor */
-void acpi_processor_power_init_pdc(struct acpi_processor_power *pow,
- unsigned int cpu)
-{
- struct cpuinfo_x86 *c = cpu_data + cpu;
-
- pow->pdc = NULL;
- if (c->x86_vendor == X86_VENDOR_INTEL)
- acpi_processor_power_init_intel_pdc(pow);
-
- return;
-}
-
-EXPORT_SYMBOL(acpi_processor_power_init_pdc);
-
/*
* Initialize bm_flags based on the CPU cache properties
* On SMP it depends on cache configuration
diff --git a/arch/i386/kernel/acpi/processor.c b/arch/i386/kernel/acpi/processor.c
new file mode 100644
index 0000000..9f4cc02
--- /dev/null
+++ b/arch/i386/kernel/acpi/processor.c
@@ -0,0 +1,75 @@
+/*
+ * arch/i386/kernel/acpi/processor.c
+ *
+ * Copyright (C) 2005 Intel Corporation
+ * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ * - Added _PDC for platforms with Intel CPUs
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+
+#include <acpi/processor.h>
+#include <asm/acpi.h>
+
+static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c)
+{
+ struct acpi_object_list *obj_list;
+ union acpi_object *obj;
+ u32 *buf;
+
+ /* allocate and initialize pdc. It will be used later. */
+ obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
+ if (!obj_list) {
+ printk(KERN_ERR "Memory allocation error\n");
+ return;
+ }
+
+ obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+ if (!obj) {
+ printk(KERN_ERR "Memory allocation error\n");
+ kfree(obj_list);
+ return;
+ }
+
+ buf = kmalloc(12, GFP_KERNEL);
+ if (!buf) {
+ printk(KERN_ERR "Memory allocation error\n");
+ kfree(obj);
+ kfree(obj_list);
+ return;
+ }
+
+ buf[0] = ACPI_PDC_REVISION_ID;
+ buf[1] = 1;
+ buf[2] = ACPI_PDC_C_CAPABILITY_SMP;
+
+ if (cpu_has(c, X86_FEATURE_EST))
+ buf[2] |= ACPI_PDC_EST_CAPABILITY_SMP;
+
+ obj->type = ACPI_TYPE_BUFFER;
+ obj->buffer.length = 12;
+ obj->buffer.pointer = (u8 *) buf;
+ obj_list->count = 1;
+ obj_list->pointer = obj;
+ pr->pdc = obj_list;
+
+ return;
+}
+
+/* Initialize _PDC data based on the CPU vendor */
+void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
+{
+ unsigned int cpu = pr->id;
+ struct cpuinfo_x86 *c = cpu_data + cpu;
+
+ pr->pdc = NULL;
+ if (c->x86_vendor == X86_VENDOR_INTEL)
+ init_intel_pdc(pr, c);
+
+ return;
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_init_pdc);
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index acd3f1e..f39e09e 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -75,8 +75,10 @@
* holds up an irq slot - in excessive cases (when multiple
* unexpected vectors occur) that might lock up the APIC
* completely.
+ * But only ack when the APIC is enabled -AK
*/
- ack_APIC_irq();
+ if (cpu_has_apic)
+ ack_APIC_irq();
}
void __init apic_intr_init(void)
@@ -1303,6 +1305,7 @@
if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_physical_apicid);
+ clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
return -1;
}
diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c
index 333578a..0810f81f 100644
--- a/arch/i386/kernel/cpu/amd.c
+++ b/arch/i386/kernel/cpu/amd.c
@@ -282,3 +282,11 @@
}
//early_arch_initcall(amd_init_cpu);
+
+static int __init amd_exit_cpu(void)
+{
+ cpu_devs[X86_VENDOR_AMD] = NULL;
+ return 0;
+}
+
+late_initcall(amd_exit_cpu);
diff --git a/arch/i386/kernel/cpu/centaur.c b/arch/i386/kernel/cpu/centaur.c
index 394814e..f52669e 100644
--- a/arch/i386/kernel/cpu/centaur.c
+++ b/arch/i386/kernel/cpu/centaur.c
@@ -405,10 +405,6 @@
winchip2_protect_mcr();
#endif
break;
- case 10:
- name="4";
- /* no info on the WC4 yet */
- break;
default:
name="??";
}
@@ -474,3 +470,11 @@
}
//early_arch_initcall(centaur_init_cpu);
+
+static int __init centaur_exit_cpu(void)
+{
+ cpu_devs[X86_VENDOR_CENTAUR] = NULL;
+ return 0;
+}
+
+late_initcall(centaur_exit_cpu);
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
index 15aee26..7eb9213 100644
--- a/arch/i386/kernel/cpu/common.c
+++ b/arch/i386/kernel/cpu/common.c
@@ -44,6 +44,7 @@
static struct cpu_dev default_cpu = {
.c_init = default_init,
+ .c_vendor = "Unknown",
};
static struct cpu_dev * this_cpu = &default_cpu;
@@ -150,6 +151,7 @@
{
char *v = c->x86_vendor_id;
int i;
+ static int printed;
for (i = 0; i < X86_VENDOR_NUM; i++) {
if (cpu_devs[i]) {
@@ -159,10 +161,17 @@
c->x86_vendor = i;
if (!early)
this_cpu = cpu_devs[i];
- break;
+ return;
}
}
}
+ if (!printed) {
+ printed++;
+ printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n");
+ printk(KERN_ERR "CPU: Your system may be unstable.\n");
+ }
+ c->x86_vendor = X86_VENDOR_UNKNOWN;
+ this_cpu = &default_cpu;
}
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
index 0f1eb50..26892d2 100644
--- a/arch/i386/kernel/cpu/cpufreq/Kconfig
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -96,6 +96,7 @@
config X86_GX_SUSPMOD
tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
+ depends on PCI
help
This add the CPUFreq driver for NatSemi Geode processors which
support suspend modulation.
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index 7975e79..3852d0a 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -295,68 +295,6 @@
}
-/*
- * acpi_processor_cpu_init_pdc_est - let BIOS know about the SMP capabilities
- * of this driver
- * @perf: processor-specific acpi_io_data struct
- * @cpu: CPU being initialized
- *
- * To avoid issues with legacy OSes, some BIOSes require to be informed of
- * the SMP capabilities of OS P-state driver. Here we set the bits in _PDC
- * accordingly, for Enhanced Speedstep. Actual call to _PDC is done in
- * driver/acpi/processor.c
- */
-static void
-acpi_processor_cpu_init_pdc_est(
- struct acpi_processor_performance *perf,
- unsigned int cpu,
- struct acpi_object_list *obj_list
- )
-{
- union acpi_object *obj;
- u32 *buf;
- struct cpuinfo_x86 *c = cpu_data + cpu;
- dprintk("acpi_processor_cpu_init_pdc_est\n");
-
- if (!cpu_has(c, X86_FEATURE_EST))
- return;
-
- /* Initialize pdc. It will be used later. */
- if (!obj_list)
- return;
-
- if (!(obj_list->count && obj_list->pointer))
- return;
-
- obj = obj_list->pointer;
- if ((obj->buffer.length == 12) && obj->buffer.pointer) {
- buf = (u32 *)obj->buffer.pointer;
- buf[0] = ACPI_PDC_REVISION_ID;
- buf[1] = 1;
- buf[2] = ACPI_PDC_EST_CAPABILITY_SMP;
- perf->pdc = obj_list;
- }
- return;
-}
-
-
-/* CPU specific PDC initialization */
-static void
-acpi_processor_cpu_init_pdc(
- struct acpi_processor_performance *perf,
- unsigned int cpu,
- struct acpi_object_list *obj_list
- )
-{
- struct cpuinfo_x86 *c = cpu_data + cpu;
- dprintk("acpi_processor_cpu_init_pdc\n");
- perf->pdc = NULL;
- if (cpu_has(c, X86_FEATURE_EST))
- acpi_processor_cpu_init_pdc_est(perf, cpu, obj_list);
- return;
-}
-
-
static int
acpi_cpufreq_cpu_init (
struct cpufreq_policy *policy)
@@ -367,14 +305,7 @@
unsigned int result = 0;
struct cpuinfo_x86 *c = &cpu_data[policy->cpu];
- union acpi_object arg0 = {ACPI_TYPE_BUFFER};
- u32 arg0_buf[3];
- struct acpi_object_list arg_list = {1, &arg0};
-
dprintk("acpi_cpufreq_cpu_init\n");
- /* setup arg_list for _PDC settings */
- arg0.buffer.length = 12;
- arg0.buffer.pointer = (u8 *) arg0_buf;
data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
if (!data)
@@ -382,9 +313,7 @@
acpi_io_data[cpu] = data;
- acpi_processor_cpu_init_pdc(&data->acpi_data, cpu, &arg_list);
result = acpi_processor_register_performance(&data->acpi_data, cpu);
- data->acpi_data.pdc = NULL;
if (result)
goto err_free;
diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
index 270f218..cc73a7a 100644
--- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
@@ -52,6 +52,7 @@
static int has_N44_O17_errata[NR_CPUS];
+static int has_N60_errata[NR_CPUS];
static unsigned int stock_freq;
static struct cpufreq_driver p4clockmod_driver;
static unsigned int cpufreq_p4_get(unsigned int cpu);
@@ -226,6 +227,12 @@
case 0x0f12:
has_N44_O17_errata[policy->cpu] = 1;
dprintk("has errata -- disabling low frequencies\n");
+ break;
+
+ case 0x0f29:
+ has_N60_errata[policy->cpu] = 1;
+ dprintk("has errata -- disabling frequencies lower than 2ghz\n");
+ break;
}
/* get max frequency */
@@ -237,6 +244,8 @@
for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
if ((i<2) && (has_N44_O17_errata[policy->cpu]))
p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ else if (has_N60_errata[policy->cpu] && p4clockmod_table[i].frequency < 2000000)
+ p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
else
p4clockmod_table[i].frequency = (stock_freq * i)/8;
}
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
index 9a826cd..c173c0f 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -362,22 +362,10 @@
*/
static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
{
- union acpi_object arg0 = {ACPI_TYPE_BUFFER};
- u32 arg0_buf[3];
- struct acpi_object_list arg_list = {1, &arg0};
unsigned long cur_freq;
int result = 0, i;
unsigned int cpu = policy->cpu;
- /* _PDC settings */
- arg0.buffer.length = 12;
- arg0.buffer.pointer = (u8 *) arg0_buf;
- arg0_buf[0] = ACPI_PDC_REVISION_ID;
- arg0_buf[1] = 1;
- arg0_buf[2] = ACPI_PDC_EST_CAPABILITY_SMP_MSR;
-
- p.pdc = &arg_list;
-
/* register with ACPI core */
if (acpi_processor_register_performance(&p, cpu)) {
dprintk(KERN_INFO PFX "obtaining ACPI data failed\n");
diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c
index 7501597..00f2e05 100644
--- a/arch/i386/kernel/cpu/cyrix.c
+++ b/arch/i386/kernel/cpu/cyrix.c
@@ -345,7 +345,7 @@
/*
* Handle National Semiconductor branded processors
*/
-static void __devinit init_nsc(struct cpuinfo_x86 *c)
+static void __init init_nsc(struct cpuinfo_x86 *c)
{
/* There may be GX1 processors in the wild that are branded
* NSC and not Cyrix.
@@ -444,6 +444,14 @@
//early_arch_initcall(cyrix_init_cpu);
+static int __init cyrix_exit_cpu(void)
+{
+ cpu_devs[X86_VENDOR_CYRIX] = NULL;
+ return 0;
+}
+
+late_initcall(cyrix_exit_cpu);
+
static struct cpu_dev nsc_cpu_dev __initdata = {
.c_vendor = "NSC",
.c_ident = { "Geode by NSC" },
@@ -458,3 +466,11 @@
}
//early_arch_initcall(nsc_init_cpu);
+
+static int __init nsc_exit_cpu(void)
+{
+ cpu_devs[X86_VENDOR_NSC] = NULL;
+ return 0;
+}
+
+late_initcall(nsc_exit_cpu);
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c
index fbfd374..ffe58ce 100644
--- a/arch/i386/kernel/cpu/intel_cacheinfo.c
+++ b/arch/i386/kernel/cpu/intel_cacheinfo.c
@@ -43,13 +43,23 @@
{ 0x2c, LVL_1_DATA, 32 }, /* 8-way set assoc, 64 byte line size */
{ 0x30, LVL_1_INST, 32 }, /* 8-way set assoc, 64 byte line size */
{ 0x39, LVL_2, 128 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x3a, LVL_2, 192 }, /* 6-way set assoc, sectored cache, 64 byte line size */
{ 0x3b, LVL_2, 128 }, /* 2-way set assoc, sectored cache, 64 byte line size */
{ 0x3c, LVL_2, 256 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x3d, LVL_2, 384 }, /* 6-way set assoc, sectored cache, 64 byte line size */
+ { 0x3e, LVL_2, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */
{ 0x41, LVL_2, 128 }, /* 4-way set assoc, 32 byte line size */
{ 0x42, LVL_2, 256 }, /* 4-way set assoc, 32 byte line size */
{ 0x43, LVL_2, 512 }, /* 4-way set assoc, 32 byte line size */
{ 0x44, LVL_2, 1024 }, /* 4-way set assoc, 32 byte line size */
{ 0x45, LVL_2, 2048 }, /* 4-way set assoc, 32 byte line size */
+ { 0x46, LVL_3, 4096 }, /* 4-way set assoc, 64 byte line size */
+ { 0x47, LVL_3, 8192 }, /* 8-way set assoc, 64 byte line size */
+ { 0x49, LVL_3, 4096 }, /* 16-way set assoc, 64 byte line size */
+ { 0x4a, LVL_3, 6144 }, /* 12-way set assoc, 64 byte line size */
+ { 0x4b, LVL_3, 8192 }, /* 16-way set assoc, 64 byte line size */
+ { 0x4c, LVL_3, 12288 }, /* 12-way set assoc, 64 byte line size */
+ { 0x4d, LVL_3, 16384 }, /* 16-way set assoc, 64 byte line size */
{ 0x60, LVL_1_DATA, 16 }, /* 8-way set assoc, sectored cache, 64 byte line size */
{ 0x66, LVL_1_DATA, 8 }, /* 4-way set assoc, sectored cache, 64 byte line size */
{ 0x67, LVL_1_DATA, 16 }, /* 4-way set assoc, sectored cache, 64 byte line size */
@@ -57,6 +67,7 @@
{ 0x70, LVL_TRACE, 12 }, /* 8-way set assoc */
{ 0x71, LVL_TRACE, 16 }, /* 8-way set assoc */
{ 0x72, LVL_TRACE, 32 }, /* 8-way set assoc */
+ { 0x73, LVL_TRACE, 64 }, /* 8-way set assoc */
{ 0x78, LVL_2, 1024 }, /* 4-way set assoc, 64 byte line size */
{ 0x79, LVL_2, 128 }, /* 8-way set assoc, sectored cache, 64 byte line size */
{ 0x7a, LVL_2, 256 }, /* 8-way set assoc, sectored cache, 64 byte line size */
@@ -141,6 +152,7 @@
return 0;
}
+/* will only be called once; __init is safe here */
static int __init find_num_cache_leaves(void)
{
unsigned int eax, ebx, ecx, edx;
diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c
index 1e9db19..3b4618b 100644
--- a/arch/i386/kernel/cpu/mtrr/main.c
+++ b/arch/i386/kernel/cpu/mtrr/main.c
@@ -44,12 +44,10 @@
#include <asm/msr.h>
#include "mtrr.h"
-#define MTRR_VERSION "2.0 (20020519)"
-
u32 num_var_ranges = 0;
unsigned int *usage_table;
-static DECLARE_MUTEX(main_lock);
+static DECLARE_MUTEX(mtrr_sem);
u32 size_or_mask, size_and_mask;
@@ -335,7 +333,7 @@
/* No CPU hotplug when we change MTRR entries */
lock_cpu_hotplug();
/* Search for existing MTRR */
- down(&main_lock);
+ down(&mtrr_sem);
for (i = 0; i < num_var_ranges; ++i) {
mtrr_if->get(i, &lbase, &lsize, <ype);
if (base >= lbase + lsize)
@@ -373,7 +371,7 @@
printk(KERN_INFO "mtrr: no more MTRRs available\n");
error = i;
out:
- up(&main_lock);
+ up(&mtrr_sem);
unlock_cpu_hotplug();
return error;
}
@@ -466,7 +464,7 @@
max = num_var_ranges;
/* No CPU hotplug when we change MTRR entries */
lock_cpu_hotplug();
- down(&main_lock);
+ down(&mtrr_sem);
if (reg < 0) {
/* Search for existing MTRR */
for (i = 0; i < max; ++i) {
@@ -505,7 +503,7 @@
set_mtrr(reg, 0, 0, 0);
error = reg;
out:
- up(&main_lock);
+ up(&mtrr_sem);
unlock_cpu_hotplug();
return error;
}
@@ -671,7 +669,6 @@
break;
}
}
- printk(KERN_INFO "mtrr: v%s\n",MTRR_VERSION);
if (mtrr_if) {
set_num_var_ranges();
@@ -688,7 +685,7 @@
if (!mtrr_if || !use_intel())
return;
/*
- * Ideally we should hold main_lock here to avoid mtrr entries changed,
+ * Ideally we should hold mtrr_sem here to avoid mtrr entries changed,
* but this routine will be called in cpu boot time, holding the lock
* breaks it. This routine is called in two cases: 1.very earily time
* of software resume, when there absolutely isn't mtrr entry changes;
diff --git a/arch/i386/kernel/cpu/nexgen.c b/arch/i386/kernel/cpu/nexgen.c
index 30898a2..ad87fa5 100644
--- a/arch/i386/kernel/cpu/nexgen.c
+++ b/arch/i386/kernel/cpu/nexgen.c
@@ -61,3 +61,11 @@
}
//early_arch_initcall(nexgen_init_cpu);
+
+static int __init nexgen_exit_cpu(void)
+{
+ cpu_devs[X86_VENDOR_NEXGEN] = NULL;
+ return 0;
+}
+
+late_initcall(nexgen_exit_cpu);
diff --git a/arch/i386/kernel/cpu/rise.c b/arch/i386/kernel/cpu/rise.c
index 8602425..d08d5a2 100644
--- a/arch/i386/kernel/cpu/rise.c
+++ b/arch/i386/kernel/cpu/rise.c
@@ -51,3 +51,11 @@
}
//early_arch_initcall(rise_init_cpu);
+
+static int __init rise_exit_cpu(void)
+{
+ cpu_devs[X86_VENDOR_RISE] = NULL;
+ return 0;
+}
+
+late_initcall(rise_exit_cpu);
diff --git a/arch/i386/kernel/cpu/transmeta.c b/arch/i386/kernel/cpu/transmeta.c
index fc42638..bdbeb77 100644
--- a/arch/i386/kernel/cpu/transmeta.c
+++ b/arch/i386/kernel/cpu/transmeta.c
@@ -84,7 +84,7 @@
#endif
}
-static void transmeta_identify(struct cpuinfo_x86 * c)
+static void __init transmeta_identify(struct cpuinfo_x86 * c)
{
u32 xlvl;
generic_identify(c);
@@ -111,3 +111,11 @@
}
//early_arch_initcall(transmeta_init_cpu);
+
+static int __init transmeta_exit_cpu(void)
+{
+ cpu_devs[X86_VENDOR_TRANSMETA] = NULL;
+ return 0;
+}
+
+late_initcall(transmeta_exit_cpu);
diff --git a/arch/i386/kernel/cpu/umc.c b/arch/i386/kernel/cpu/umc.c
index 264fcad..2cd988f 100644
--- a/arch/i386/kernel/cpu/umc.c
+++ b/arch/i386/kernel/cpu/umc.c
@@ -31,3 +31,11 @@
}
//early_arch_initcall(umc_init_cpu);
+
+static int __init umc_exit_cpu(void)
+{
+ cpu_devs[X86_VENDOR_UMC] = NULL;
+ return 0;
+}
+
+late_initcall(umc_exit_cpu);
diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
index 91a6401..0102f3d 100644
--- a/arch/i386/kernel/mpparse.c
+++ b/arch/i386/kernel/mpparse.c
@@ -1080,7 +1080,7 @@
#define MAX_GSI_NUM 4096
-int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
+int mp_register_gsi (u32 gsi, int triggering, int polarity)
{
int ioapic = -1;
int ioapic_pin = 0;
@@ -1129,7 +1129,7 @@
mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
- if (edge_level) {
+ if (triggering == ACPI_LEVEL_SENSITIVE) {
/*
* For PCI devices assign IRQs in order, avoiding gaps
* due to unused I/O APIC pins.
@@ -1151,8 +1151,8 @@
}
io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
- edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1,
- active_high_low == ACPI_ACTIVE_HIGH ? 0 : 1);
+ triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
return gsi;
}
diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c
index d661703..63f39a7 100644
--- a/arch/i386/kernel/nmi.c
+++ b/arch/i386/kernel/nmi.c
@@ -138,7 +138,7 @@
if (nmi_watchdog == NMI_LOCAL_APIC)
smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
- for (cpu = 0; cpu < NR_CPUS; cpu++)
+ for_each_cpu(cpu)
prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count;
local_irq_enable();
mdelay((10*1000)/nmi_hz); // wait 10 ticks
diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c
index 2185377..0480454 100644
--- a/arch/i386/kernel/process.c
+++ b/arch/i386/kernel/process.c
@@ -297,8 +297,10 @@
if (user_mode(regs))
printk(" ESP: %04x:%08lx",0xffff & regs->xss,regs->esp);
- printk(" EFLAGS: %08lx %s (%s)\n",
- regs->eflags, print_tainted(), system_utsname.release);
+ printk(" EFLAGS: %08lx %s (%s %.*s)\n",
+ regs->eflags, print_tainted(), system_utsname.release,
+ (int)strcspn(system_utsname.version, " "),
+ system_utsname.version);
printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
regs->eax,regs->ebx,regs->ecx,regs->edx);
printk("ESI: %08lx EDI: %08lx EBP: %08lx",
diff --git a/arch/i386/kernel/syscall_table.S b/arch/i386/kernel/syscall_table.S
index 1b66592..5a8b3fb 100644
--- a/arch/i386/kernel/syscall_table.S
+++ b/arch/i386/kernel/syscall_table.S
@@ -309,3 +309,4 @@
.long sys_faccessat
.long sys_pselect6
.long sys_ppoll
+ .long sys_unshare /* 310 */
diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
index 47675bb..7c86e3c 100644
--- a/arch/i386/kernel/timers/timer_tsc.c
+++ b/arch/i386/kernel/timers/timer_tsc.c
@@ -45,6 +45,15 @@
static unsigned long long monotonic_base;
static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
+/* Avoid compensating for lost ticks before TSCs are synched */
+static int detect_lost_ticks;
+static int __init start_lost_tick_compensation(void)
+{
+ detect_lost_ticks = 1;
+ return 0;
+}
+late_initcall(start_lost_tick_compensation);
+
/* convert from cycles(64bits) => nanoseconds (64bits)
* basic equation:
* ns = cycles / (freq / ns_per_sec)
@@ -196,7 +205,8 @@
/* lost tick compensation */
offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
- if (unlikely(((offset - hpet_last) > hpet_tick) && (hpet_last != 0))) {
+ if (unlikely(((offset - hpet_last) > hpet_tick) && (hpet_last != 0))
+ && detect_lost_ticks) {
int lost_ticks = (offset - hpet_last) / hpet_tick;
jiffies_64 += lost_ticks;
}
@@ -421,7 +431,7 @@
delta += delay_at_last_interrupt;
lost = delta/(1000000/HZ);
delay = delta%(1000000/HZ);
- if (lost >= 2) {
+ if (lost >= 2 && detect_lost_ticks) {
jiffies_64 += lost-1;
/* sanity check to ensure we're not always losing ticks */
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 0aaebf3..b814dbd 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -166,7 +166,8 @@
stack = (unsigned long*)context->previous_esp;
if (!stack)
break;
- printk(KERN_EMERG " =======================\n");
+ printk(log_lvl);
+ printk(" =======================\n");
}
}
@@ -239,9 +240,11 @@
}
print_modules();
printk(KERN_EMERG "CPU: %d\nEIP: %04x:[<%08lx>] %s VLI\n"
- "EFLAGS: %08lx (%s) \n",
+ "EFLAGS: %08lx (%s %.*s) \n",
smp_processor_id(), 0xffff & regs->xcs, regs->eip,
- print_tainted(), regs->eflags, system_utsname.release);
+ print_tainted(), regs->eflags, system_utsname.release,
+ (int)strcspn(system_utsname.version, " "),
+ system_utsname.version);
print_symbol(KERN_EMERG "EIP is at %s\n", regs->eip);
printk(KERN_EMERG "eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n",
regs->eax, regs->ebx, regs->ecx, regs->edx);
diff --git a/arch/i386/oprofile/backtrace.c b/arch/i386/oprofile/backtrace.c
index 21654be..acc1813 100644
--- a/arch/i386/oprofile/backtrace.c
+++ b/arch/i386/oprofile/backtrace.c
@@ -49,7 +49,9 @@
* | stack |
* --------------- saved regs->ebp value if valid (frame_head address)
* . .
- * --------------- struct pt_regs stored on stack (struct pt_regs *)
+ * --------------- saved regs->rsp value if x86_64
+ * | |
+ * --------------- struct pt_regs * stored on stack if 32-bit
* | |
* . .
* | |
@@ -57,13 +59,26 @@
* | |
* | | \/ Lower addresses
*
- * Thus, &pt_regs <-> stack base restricts the valid(ish) ebp values
+ * Thus, regs (or regs->rsp for x86_64) <-> stack base restricts the
+ * valid(ish) ebp values. Note: (1) for x86_64, NMI and several other
+ * exceptions use special stacks, maintained by the interrupt stack table
+ * (IST). These stacks are set up in trap_init() in
+ * arch/x86_64/kernel/traps.c. Thus, for x86_64, regs now does not point
+ * to the kernel stack; instead, it points to some location on the NMI
+ * stack. On the other hand, regs->rsp is the stack pointer saved when the
+ * NMI occurred. (2) For 32-bit, regs->esp is not valid because the
+ * processor does not save %esp on the kernel stack when interrupts occur
+ * in the kernel mode.
*/
#ifdef CONFIG_FRAME_POINTER
static int valid_kernel_stack(struct frame_head * head, struct pt_regs * regs)
{
unsigned long headaddr = (unsigned long)head;
+#ifdef CONFIG_X86_64
+ unsigned long stack = (unsigned long)regs->rsp;
+#else
unsigned long stack = (unsigned long)regs;
+#endif
unsigned long stack_base = (stack & ~(THREAD_SIZE - 1)) + THREAD_SIZE;
return headaddr > stack && headaddr < stack_base;
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index e715aa9..3ca59ca 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -539,6 +539,11 @@
case PCI_DEVICE_ID_INTEL_ICH7_30:
case PCI_DEVICE_ID_INTEL_ICH7_31:
case PCI_DEVICE_ID_INTEL_ESB2_0:
+ case PCI_DEVICE_ID_INTEL_ICH8_0:
+ case PCI_DEVICE_ID_INTEL_ICH8_1:
+ case PCI_DEVICE_ID_INTEL_ICH8_2:
+ case PCI_DEVICE_ID_INTEL_ICH8_3:
+ case PCI_DEVICE_ID_INTEL_ICH8_4:
r->name = "PIIX/ICH";
r->get = pirq_piix_get;
r->set = pirq_piix_set;
diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c
index 4bb4d4b..0ee8a98 100644
--- a/arch/i386/pci/mmconfig.c
+++ b/arch/i386/pci/mmconfig.c
@@ -36,8 +36,7 @@
while (1) {
++cfg_num;
if (cfg_num >= pci_mmcfg_config_num) {
- /* Not found - fallback to type 1 */
- return 0;
+ break;
}
cfg = &pci_mmcfg_config[cfg_num];
if (cfg->pci_segment_group_number != seg)
@@ -46,6 +45,18 @@
(cfg->end_bus_number >= bus))
return cfg->base_address;
}
+
+ /* Handle more broken MCFG tables on Asus etc.
+ They only contain a single entry for bus 0-0. Assume
+ this applies to all busses. */
+ cfg = &pci_mmcfg_config[0];
+ if (pci_mmcfg_config_num == 1 &&
+ cfg->pci_segment_group_number == 0 &&
+ (cfg->start_bus_number | cfg->end_bus_number) == 0)
+ return cfg->base_address;
+
+ /* Fall back to type 0 */
+ return 0;
}
static inline void pci_exp_set_dev_base(unsigned int base, int bus, int devfn)
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 199eeaf..845cd09 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -194,7 +194,6 @@
default "7" if MCKINLEY
default "6" if ITANIUM
-# align cache-sensitive data to 64 bytes
config IA64_CYCLONE
bool "Cyclone (EXA) Time Source support"
help
@@ -374,6 +373,9 @@
To use this option, you have to ensure that the "/proc file system
support" (CONFIG_PROC_FS) is enabled, too.
+config SGI_SN
+ def_bool y if (IA64_SGI_SN2 || IA64_GENERIC)
+
source "drivers/firmware/Kconfig"
source "fs/Kconfig.binfmt"
diff --git a/arch/ia64/dig/setup.c b/arch/ia64/dig/setup.c
index d58003f..c9104bf 100644
--- a/arch/ia64/dig/setup.c
+++ b/arch/ia64/dig/setup.c
@@ -25,16 +25,6 @@
#include <asm/machvec.h>
#include <asm/system.h>
-/*
- * This is here so we can use the CMOS detection in ide-probe.c to
- * determine what drives are present. In theory, we don't need this
- * as the auto-detection could be done via ide-probe.c:do_probe() but
- * in practice that would be much slower, which is painful when
- * running in the simulator. Note that passing zeroes in DRIVE_INFO
- * is sufficient (the IDE driver will autodetect the drive geometry).
- */
-char drive_info[4*16];
-
void __init
dig_setup (char **cmdline_p)
{
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 307514f..09a0dbc 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -13,6 +13,11 @@
obj-$(CONFIG_IA64_GENERIC) += acpi-ext.o
obj-$(CONFIG_IA64_HP_ZX1) += acpi-ext.o
obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += acpi-ext.o
+
+ifneq ($(CONFIG_ACPI_PROCESSOR),)
+obj-y += acpi-processor.o
+endif
+
obj-$(CONFIG_IA64_PALINFO) += palinfo.o
obj-$(CONFIG_IOSAPIC) += iosapic.o
obj-$(CONFIG_MODULES) += module.o
diff --git a/arch/ia64/kernel/acpi-ext.c b/arch/ia64/kernel/acpi-ext.c
index 13a5b3b..4a5574f 100644
--- a/arch/ia64/kernel/acpi-ext.c
+++ b/arch/ia64/kernel/acpi-ext.c
@@ -33,33 +33,33 @@
struct acpi_vendor_info *info = (struct acpi_vendor_info *)context;
struct acpi_resource_vendor *vendor;
struct acpi_vendor_descriptor *descriptor;
- u32 length;
+ u32 byte_length;
- if (resource->id != ACPI_RSTYPE_VENDOR)
+ if (resource->type != ACPI_RESOURCE_TYPE_VENDOR)
return AE_OK;
vendor = (struct acpi_resource_vendor *)&resource->data;
- descriptor = (struct acpi_vendor_descriptor *)vendor->reserved;
- if (vendor->length <= sizeof(*info->descriptor) ||
+ descriptor = (struct acpi_vendor_descriptor *)vendor->byte_data;
+ if (vendor->byte_length <= sizeof(*info->descriptor) ||
descriptor->guid_id != info->descriptor->guid_id ||
efi_guidcmp(descriptor->guid, info->descriptor->guid))
return AE_OK;
- length = vendor->length - sizeof(struct acpi_vendor_descriptor);
- info->data = acpi_os_allocate(length);
+ byte_length = vendor->byte_length - sizeof(struct acpi_vendor_descriptor);
+ info->data = acpi_os_allocate(byte_length);
if (!info->data)
return AE_NO_MEMORY;
memcpy(info->data,
- vendor->reserved + sizeof(struct acpi_vendor_descriptor),
- length);
- info->length = length;
+ vendor->byte_data + sizeof(struct acpi_vendor_descriptor),
+ byte_length);
+ info->length = byte_length;
return AE_CTRL_TERMINATE;
}
acpi_status
acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor * id,
- u8 ** data, u32 * length)
+ u8 ** data, u32 * byte_length)
{
struct acpi_vendor_info info;
@@ -72,7 +72,7 @@
return AE_NOT_FOUND;
*data = info.data;
- *length = info.length;
+ *byte_length = info.length;
return AE_OK;
}
diff --git a/arch/ia64/kernel/acpi-processor.c b/arch/ia64/kernel/acpi-processor.c
new file mode 100644
index 0000000..e683630
--- /dev/null
+++ b/arch/ia64/kernel/acpi-processor.c
@@ -0,0 +1,67 @@
+/*
+ * arch/ia64/kernel/cpufreq/processor.c
+ *
+ * Copyright (C) 2005 Intel Corporation
+ * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ * - Added _PDC for platforms with Intel CPUs
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+
+#include <acpi/processor.h>
+#include <asm/acpi.h>
+
+static void init_intel_pdc(struct acpi_processor *pr)
+{
+ struct acpi_object_list *obj_list;
+ union acpi_object *obj;
+ u32 *buf;
+
+ /* allocate and initialize pdc. It will be used later. */
+ obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
+ if (!obj_list) {
+ printk(KERN_ERR "Memory allocation error\n");
+ return;
+ }
+
+ obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+ if (!obj) {
+ printk(KERN_ERR "Memory allocation error\n");
+ kfree(obj_list);
+ return;
+ }
+
+ buf = kmalloc(12, GFP_KERNEL);
+ if (!buf) {
+ printk(KERN_ERR "Memory allocation error\n");
+ kfree(obj);
+ kfree(obj_list);
+ return;
+ }
+
+ buf[0] = ACPI_PDC_REVISION_ID;
+ buf[1] = 1;
+ buf[2] |= ACPI_PDC_EST_CAPABILITY_SMP;
+
+ obj->type = ACPI_TYPE_BUFFER;
+ obj->buffer.length = 12;
+ obj->buffer.pointer = (u8 *) buf;
+ obj_list->count = 1;
+ obj_list->pointer = obj;
+ pr->pdc = obj_list;
+
+ return;
+}
+
+/* Initialize _PDC data based on the CPU vendor */
+void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
+{
+ pr->pdc = NULL;
+ init_intel_pdc(pr);
+ return;
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_init_pdc);
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 9ad94dd..d2702c4 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -567,16 +567,16 @@
* success: return IRQ number (>=0)
* failure: return < 0
*/
-int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
+int acpi_register_gsi(u32 gsi, int triggering, int polarity)
{
if (has_8259 && gsi < 16)
return isa_irq_to_vector(gsi);
return iosapic_register_intr(gsi,
- (active_high_low ==
+ (polarity ==
ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH :
IOSAPIC_POL_LOW,
- (edge_level ==
+ (triggering ==
ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE :
IOSAPIC_LEVEL);
}
diff --git a/arch/ia64/kernel/cpufreq/Makefile b/arch/ia64/kernel/cpufreq/Makefile
index f748d34..4838f2a 100644
--- a/arch/ia64/kernel/cpufreq/Makefile
+++ b/arch/ia64/kernel/cpufreq/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_IA64_ACPI_CPUFREQ) += acpi-cpufreq.o
+
diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
index da4d5cf..5a1bf81 100644
--- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
+++ b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
@@ -269,48 +269,6 @@
}
-/*
- * processor_init_pdc - let BIOS know about the SMP capabilities
- * of this driver
- * @perf: processor-specific acpi_io_data struct
- * @cpu: CPU being initialized
- *
- * To avoid issues with legacy OSes, some BIOSes require to be informed of
- * the SMP capabilities of OS P-state driver. Here we set the bits in _PDC
- * accordingly. Actual call to _PDC is done in driver/acpi/processor.c
- */
-static void
-processor_init_pdc (
- struct acpi_processor_performance *perf,
- unsigned int cpu,
- struct acpi_object_list *obj_list
- )
-{
- union acpi_object *obj;
- u32 *buf;
-
- dprintk("processor_init_pdc\n");
-
- perf->pdc = NULL;
- /* Initialize pdc. It will be used later. */
- if (!obj_list)
- return;
-
- if (!(obj_list->count && obj_list->pointer))
- return;
-
- obj = obj_list->pointer;
- if ((obj->buffer.length == 12) && obj->buffer.pointer) {
- buf = (u32 *)obj->buffer.pointer;
- buf[0] = ACPI_PDC_REVISION_ID;
- buf[1] = 1;
- buf[2] = ACPI_PDC_EST_CAPABILITY_SMP;
- perf->pdc = obj_list;
- }
- return;
-}
-
-
static int
acpi_cpufreq_cpu_init (
struct cpufreq_policy *policy)
@@ -320,14 +278,7 @@
struct cpufreq_acpi_io *data;
unsigned int result = 0;
- union acpi_object arg0 = {ACPI_TYPE_BUFFER};
- u32 arg0_buf[3];
- struct acpi_object_list arg_list = {1, &arg0};
-
dprintk("acpi_cpufreq_cpu_init\n");
- /* setup arg_list for _PDC settings */
- arg0.buffer.length = 12;
- arg0.buffer.pointer = (u8 *) arg0_buf;
data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
if (!data)
@@ -337,9 +288,7 @@
acpi_io_data[cpu] = data;
- processor_init_pdc(&data->acpi_data, cpu, &arg_list);
result = acpi_processor_register_performance(&data->acpi_data, cpu);
- data->acpi_data.pdc = NULL;
if (result)
goto err_free;
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index c485a3b..9990320 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -410,24 +410,16 @@
efi_config_table_t *config_tables;
efi_char16_t *c16;
u64 efi_desc_size;
- char *cp, *end, vendor[100] = "unknown";
+ char *cp, vendor[100] = "unknown";
extern char saved_command_line[];
int i;
/* it's too early to be able to use the standard kernel command line support... */
for (cp = saved_command_line; *cp; ) {
if (memcmp(cp, "mem=", 4) == 0) {
- cp += 4;
- mem_limit = memparse(cp, &end);
- if (end != cp)
- break;
- cp = end;
+ mem_limit = memparse(cp + 4, &cp);
} else if (memcmp(cp, "max_addr=", 9) == 0) {
- cp += 9;
- max_addr = GRANULEROUNDDOWN(memparse(cp, &end));
- if (end != cp)
- break;
- cp = end;
+ max_addr = GRANULEROUNDDOWN(memparse(cp + 9, &cp));
} else {
while (*cp != ' ' && *cp)
++cp;
@@ -458,7 +450,7 @@
/* Show what we know for posterity */
c16 = __va(efi.systab->fw_vendor);
if (c16) {
- for (i = 0;i < (int) sizeof(vendor) && *c16; ++i)
+ for (i = 0;i < (int) sizeof(vendor) - 1 && *c16; ++i)
vendor[i] = *c16++;
vendor[i] = '\0';
}
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index fbc7ea3..f1778a8 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -352,6 +352,7 @@
mov ar.rsc=0 // place RSE in enforced lazy mode
;;
loadrs // clear the dirty partition
+ mov IA64_KR(PER_CPU_DATA)=r0 // clear physical per-CPU base
;;
mov ar.bspstore=r2 // establish the new RSE stack
;;
diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S
index 403a80a..60a464b 100644
--- a/arch/ia64/kernel/mca_asm.S
+++ b/arch/ia64/kernel/mca_asm.S
@@ -512,7 +512,7 @@
st8 [temp1]=r12 // os_status, default is cold boot
mov r6=IA64_MCA_SAME_CONTEXT
;;
- st8 [temp1]=r6 // context, default is same context
+ st8 [temp2]=r6 // context, default is same context
// Save the pt_regs data that is not in minstate. The previous code
// left regs at sos.
diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c
index acc0f13..056f7a6 100644
--- a/arch/ia64/kernel/sal.c
+++ b/arch/ia64/kernel/sal.c
@@ -14,6 +14,7 @@
#include <linux/spinlock.h>
#include <linux/string.h>
+#include <asm/delay.h>
#include <asm/page.h>
#include <asm/sal.h>
#include <asm/pal.h>
@@ -214,6 +215,78 @@
static void __init sal_desc_ap_wakeup(void *p) { }
#endif
+/*
+ * HP rx5670 firmware polls for interrupts during SAL_CACHE_FLUSH by reading
+ * cr.ivr, but it never writes cr.eoi. This leaves any interrupt marked as
+ * "in-service" and masks other interrupts of equal or lower priority.
+ *
+ * HP internal defect reports: F1859, F2775, F3031.
+ */
+static int sal_cache_flush_drops_interrupts;
+
+static void __init
+check_sal_cache_flush (void)
+{
+ unsigned long flags, itv;
+ int cpu;
+ u64 vector;
+
+ cpu = get_cpu();
+ local_irq_save(flags);
+
+ /*
+ * Schedule a timer interrupt, wait until it's reported, and see if
+ * SAL_CACHE_FLUSH drops it.
+ */
+ itv = ia64_get_itv();
+ BUG_ON((itv & (1 << 16)) == 0);
+
+ ia64_set_itv(IA64_TIMER_VECTOR);
+ ia64_set_itm(ia64_get_itc() + 1000);
+
+ while (!ia64_get_irr(IA64_TIMER_VECTOR))
+ cpu_relax();
+
+ ia64_sal_cache_flush(3);
+
+ if (ia64_get_irr(IA64_TIMER_VECTOR)) {
+ vector = ia64_get_ivr();
+ ia64_eoi();
+ WARN_ON(vector != IA64_TIMER_VECTOR);
+ } else {
+ sal_cache_flush_drops_interrupts = 1;
+ printk(KERN_ERR "SAL: SAL_CACHE_FLUSH drops interrupts; "
+ "PAL_CACHE_FLUSH will be used instead\n");
+ ia64_eoi();
+ }
+
+ ia64_set_itv(itv);
+ local_irq_restore(flags);
+ put_cpu();
+}
+
+s64
+ia64_sal_cache_flush (u64 cache_type)
+{
+ struct ia64_sal_retval isrv;
+
+ if (sal_cache_flush_drops_interrupts) {
+ unsigned long flags;
+ u64 progress;
+ s64 rc;
+
+ progress = 0;
+ local_irq_save(flags);
+ rc = ia64_pal_cache_flush(cache_type,
+ PAL_CACHE_FLUSH_INVALIDATE, &progress, NULL);
+ local_irq_restore(flags);
+ return rc;
+ }
+
+ SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
+ return isrv.status;
+}
+
void __init
ia64_sal_init (struct ia64_sal_systab *systab)
{
@@ -262,6 +335,8 @@
}
p += SAL_DESC_SIZE(*p);
}
+
+ check_sal_cache_flush();
}
int
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index c076657..35f7835 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -71,6 +71,8 @@
EXPORT_SYMBOL(__per_cpu_offset);
#endif
+extern void ia64_setup_printk_clock(void);
+
DEFINE_PER_CPU(struct cpuinfo_ia64, cpu_info);
DEFINE_PER_CPU(unsigned long, local_per_cpu_offset);
DEFINE_PER_CPU(unsigned long, ia64_phys_stacked_size_p8);
@@ -445,6 +447,8 @@
/* process SAL system table: */
ia64_sal_init(efi.sal_systab);
+ ia64_setup_printk_clock();
+
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 028a2b9..a094ec4 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -278,3 +278,30 @@
}
}
EXPORT_SYMBOL(udelay);
+
+static unsigned long long ia64_itc_printk_clock(void)
+{
+ if (ia64_get_kr(IA64_KR_PER_CPU_DATA))
+ return sched_clock();
+ return 0;
+}
+
+static unsigned long long ia64_default_printk_clock(void)
+{
+ return (unsigned long long)(jiffies_64 - INITIAL_JIFFIES) *
+ (1000000000/HZ);
+}
+
+unsigned long long (*ia64_printk_clock)(void) = &ia64_default_printk_clock;
+
+unsigned long long printk_clock(void)
+{
+ return ia64_printk_clock();
+}
+
+void __init
+ia64_setup_printk_clock(void)
+{
+ if (!(sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT))
+ ia64_printk_clock = ia64_itc_printk_clock;
+}
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 706b773..6e5eea1 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -71,31 +71,33 @@
int i, err = 0;
#ifdef CONFIG_NUMA
- sysfs_nodes = kmalloc(sizeof(struct node) * MAX_NUMNODES, GFP_KERNEL);
+ sysfs_nodes = kzalloc(sizeof(struct node) * MAX_NUMNODES, GFP_KERNEL);
if (!sysfs_nodes) {
err = -ENOMEM;
goto out;
}
- memset(sysfs_nodes, 0, sizeof(struct node) * MAX_NUMNODES);
- /* MCD - Do we want to register all ONLINE nodes, or all POSSIBLE nodes? */
- for_each_online_node(i)
+ /*
+ * MCD - Do we want to register all ONLINE nodes, or all POSSIBLE nodes?
+ */
+ for_each_online_node(i) {
if ((err = register_node(&sysfs_nodes[i], i, 0)))
goto out;
+ }
#endif
- sysfs_cpus = kmalloc(sizeof(struct ia64_cpu) * NR_CPUS, GFP_KERNEL);
+ sysfs_cpus = kzalloc(sizeof(struct ia64_cpu) * NR_CPUS, GFP_KERNEL);
if (!sysfs_cpus) {
err = -ENOMEM;
goto out;
}
- memset(sysfs_cpus, 0, sizeof(struct ia64_cpu) * NR_CPUS);
- for_each_present_cpu(i)
+ for_each_present_cpu(i) {
if((err = arch_register_cpu(i)))
goto out;
+ }
out:
return err;
}
-__initcall(topology_init);
+subsys_initcall(topology_init);
diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c
index 43b45b6..f9e0ae9 100644
--- a/arch/ia64/kernel/unaligned.c
+++ b/arch/ia64/kernel/unaligned.c
@@ -1283,8 +1283,9 @@
if (jiffies - last_time > 5*HZ)
count = 0;
- if (++count < 5) {
+ if (count < 5) {
last_time = jiffies;
+ count++;
return 1;
}
return 0;
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index d27ecdc..0b30ca0 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -193,12 +193,12 @@
goto free_resource;
}
- min = addr->min_address_range;
+ min = addr->minimum;
max = min + addr->address_length - 1;
- if (addr->attribute.io.translation_attribute == ACPI_SPARSE_TRANSLATION)
+ if (addr->info.io.translation_type == ACPI_SPARSE_TRANSLATION)
sparse = 1;
- space_nr = new_space(addr->address_translation_offset, sparse);
+ space_nr = new_space(addr->translation_offset, sparse);
if (space_nr == ~0)
goto free_name;
@@ -285,7 +285,7 @@
if (addr.resource_type == ACPI_MEMORY_RANGE) {
flags = IORESOURCE_MEM;
root = &iomem_resource;
- offset = addr.address_translation_offset;
+ offset = addr.translation_offset;
} else if (addr.resource_type == ACPI_IO_RANGE) {
flags = IORESOURCE_IO;
root = &ioport_resource;
@@ -298,7 +298,7 @@
window = &info->controller->window[info->controller->windows++];
window->resource.name = info->name;
window->resource.flags = flags;
- window->resource.start = addr.min_address_range + offset;
+ window->resource.start = addr.minimum + offset;
window->resource.end = window->resource.start + addr.address_length - 1;
window->resource.child = NULL;
window->offset = offset;
diff --git a/arch/ia64/sn/Makefile b/arch/ia64/sn/Makefile
index a269f6d..79a7df0 100644
--- a/arch/ia64/sn/Makefile
+++ b/arch/ia64/sn/Makefile
@@ -9,6 +9,4 @@
# Makefile for the sn ia64 subplatform
#
-CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
-
obj-y += kernel/ pci/
diff --git a/arch/ia64/sn/kernel/Makefile b/arch/ia64/sn/kernel/Makefile
index 4351c4f..3e9b4ee 100644
--- a/arch/ia64/sn/kernel/Makefile
+++ b/arch/ia64/sn/kernel/Makefile
@@ -7,6 +7,8 @@
# Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All Rights Reserved.
#
+CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
+
obj-y += setup.o bte.o bte_error.o irq.o mca.o idle.o \
huberror.o io_init.o iomv.o klconflib.o sn2/
obj-$(CONFIG_IA64_GENERIC) += machvec.o
diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c
index dd73c0c..1f11db4 100644
--- a/arch/ia64/sn/kernel/bte.c
+++ b/arch/ia64/sn/kernel/bte.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/config.h>
@@ -186,18 +186,13 @@
/* Initialize the notification to a known value. */
*bte->most_rcnt_na = BTE_WORD_BUSY;
- notif_phys_addr = TO_PHYS(ia64_tpa((unsigned long)bte->most_rcnt_na));
+ notif_phys_addr = (u64)bte->most_rcnt_na;
- if (is_shub2()) {
- src = SH2_TIO_PHYS_TO_DMA(src);
- dest = SH2_TIO_PHYS_TO_DMA(dest);
- notif_phys_addr = SH2_TIO_PHYS_TO_DMA(notif_phys_addr);
- }
/* Set the source and destination registers */
- BTE_PRINTKV(("IBSA = 0x%lx)\n", (TO_PHYS(src))));
- BTE_SRC_STORE(bte, TO_PHYS(src));
- BTE_PRINTKV(("IBDA = 0x%lx)\n", (TO_PHYS(dest))));
- BTE_DEST_STORE(bte, TO_PHYS(dest));
+ BTE_PRINTKV(("IBSA = 0x%lx)\n", src));
+ BTE_SRC_STORE(bte, src);
+ BTE_PRINTKV(("IBDA = 0x%lx)\n", dest));
+ BTE_DEST_STORE(bte, dest);
/* Set the notification register */
BTE_PRINTKV(("IBNA = 0x%lx)\n", notif_phys_addr));
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 00700f7..d7e4d79 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -10,6 +10,7 @@
#include <linux/nodemask.h>
#include <asm/sn/types.h>
#include <asm/sn/addrs.h>
+#include <asm/sn/sn_feature_sets.h>
#include <asm/sn/geo.h>
#include <asm/sn/io.h>
#include <asm/sn/pcibr_provider.h>
@@ -173,8 +174,8 @@
*/
static u8 war_implemented = 0;
-static void sn_device_fixup_war(u64 nasid, u64 widget, int device,
- struct sn_flush_device_common *common)
+static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device,
+ struct sn_flush_device_common *common)
{
struct sn_flush_device_war *war_list;
struct sn_flush_device_war *dev_entry;
@@ -198,15 +199,16 @@
dev_entry = war_list + device;
memcpy(common,dev_entry, sizeof(*common));
-
kfree(war_list);
+
+ return isrv.status;
}
/*
* sn_fixup_ionodes() - This routine initializes the HUB data strcuture for
* each node in the system.
*/
-static void sn_fixup_ionodes(void)
+static void __init sn_fixup_ionodes(void)
{
struct sn_flush_device_kernel *sn_flush_device_kernel;
struct sn_flush_device_kernel *dev_entry;
@@ -279,23 +281,21 @@
memset(dev_entry->common, 0x0, sizeof(struct
sn_flush_device_common));
- status = sal_get_device_dmaflush_list(nasid,
- widget,
- device,
+ if (sn_prom_feature_available(
+ PRF_DEVICE_FLUSH_LIST))
+ status = sal_get_device_dmaflush_list(
+ nasid,
+ widget,
+ device,
(u64)(dev_entry->common));
- if (status) {
- if (sn_sal_rev() < 0x0450) {
- /* shortlived WAR for older
- * PROM images
- */
- sn_device_fixup_war(nasid,
- widget,
- device,
+ else
+ status = sn_device_fixup_war(nasid,
+ widget,
+ device,
dev_entry->common);
- }
- else
- BUG();
- }
+ if (status != SALRET_OK)
+ panic("SAL call failed: %s\n",
+ ia64_sal_strerror(status));
spin_lock_init(&dev_entry->sfdl_flush_lock);
}
@@ -467,6 +467,13 @@
pcidev_info->pdi_sn_irq_info = NULL;
kfree(sn_irq_info);
}
+
+ /*
+ * MSI currently not supported on altix. Remove this when
+ * the MSI abstraction patches are integrated into the kernel
+ * (sometime after 2.6.16 releases)
+ */
+ dev->no_msi = 1;
}
/*
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index ec37084..74d87d9 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -5,11 +5,12 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/irq.h>
#include <linux/spinlock.h>
+#include <linux/init.h>
#include <asm/sn/addrs.h>
#include <asm/sn/arch.h>
#include <asm/sn/intr.h>
@@ -76,17 +77,15 @@
static void sn_ack_irq(unsigned int irq)
{
- u64 event_occurred, mask = 0;
+ u64 event_occurred, mask;
irq = irq & 0xff;
- event_occurred =
- HUB_L((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED));
+ event_occurred = HUB_L((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED));
mask = event_occurred & SH_ALL_INT_MASK;
- HUB_S((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED_ALIAS),
- mask);
+ HUB_S((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED_ALIAS), mask);
__set_bit(irq, (volatile void *)pda->sn_in_service_ivecs);
- move_irq(irq);
+ move_native_irq(irq);
}
static void sn_end_irq(unsigned int irq)
@@ -219,9 +218,8 @@
pdacpu(cpu)->sn_last_irq = irq;
}
- if (pdacpu(cpu)->sn_first_irq == 0 || pdacpu(cpu)->sn_first_irq > irq) {
+ if (pdacpu(cpu)->sn_first_irq == 0 || pdacpu(cpu)->sn_first_irq > irq)
pdacpu(cpu)->sn_first_irq = irq;
- }
}
static void unregister_intr_pda(struct sn_irq_info *sn_irq_info)
@@ -289,7 +287,7 @@
list_add_rcu(&sn_irq_info->list, sn_irq_lh[sn_irq_info->irq_irq]);
spin_unlock(&sn_irq_info_lock);
- (void)register_intr_pda(sn_irq_info);
+ register_intr_pda(sn_irq_info);
}
void sn_irq_unfixup(struct pci_dev *pci_dev)
@@ -419,7 +417,7 @@
rcu_read_unlock();
}
-void sn_irq_lh_init(void)
+void __init sn_irq_lh_init(void)
{
int i;
@@ -434,5 +432,4 @@
INIT_LIST_HEAD(sn_irq_lh[i]);
}
-
}
diff --git a/arch/ia64/sn/kernel/klconflib.c b/arch/ia64/sn/kernel/klconflib.c
index 0f11a32..87682b4 100644
--- a/arch/ia64/sn/kernel/klconflib.c
+++ b/arch/ia64/sn/kernel/klconflib.c
@@ -78,31 +78,30 @@
position = MODULE_GET_BPOS(m);
if ((fmt == MODULE_FORMAT_BRIEF) || (fmt == MODULE_FORMAT_LCD)) {
- /* Brief module number format, eg. 002c15 */
+ /* Brief module number format, eg. 002c15 */
- /* Decompress the rack number */
- *buffer++ = '0' + RACK_GET_CLASS(rack);
- *buffer++ = '0' + RACK_GET_GROUP(rack);
- *buffer++ = '0' + RACK_GET_NUM(rack);
+ /* Decompress the rack number */
+ *buffer++ = '0' + RACK_GET_CLASS(rack);
+ *buffer++ = '0' + RACK_GET_GROUP(rack);
+ *buffer++ = '0' + RACK_GET_NUM(rack);
- /* Add the brick type */
- *buffer++ = brickchar;
+ /* Add the brick type */
+ *buffer++ = brickchar;
}
else if (fmt == MODULE_FORMAT_LONG) {
- /* Fuller hwgraph format, eg. rack/002/bay/15 */
+ /* Fuller hwgraph format, eg. rack/002/bay/15 */
- strcpy(buffer, "rack" "/"); buffer += strlen(buffer);
+ strcpy(buffer, "rack" "/"); buffer += strlen(buffer);
- *buffer++ = '0' + RACK_GET_CLASS(rack);
- *buffer++ = '0' + RACK_GET_GROUP(rack);
- *buffer++ = '0' + RACK_GET_NUM(rack);
+ *buffer++ = '0' + RACK_GET_CLASS(rack);
+ *buffer++ = '0' + RACK_GET_GROUP(rack);
+ *buffer++ = '0' + RACK_GET_NUM(rack);
- strcpy(buffer, "/" "bay" "/"); buffer += strlen(buffer);
+ strcpy(buffer, "/" "bay" "/"); buffer += strlen(buffer);
}
/* Add the bay position, using at least two digits */
if (position < 10)
- *buffer++ = '0';
+ *buffer++ = '0';
sprintf(buffer, "%d", position);
-
}
diff --git a/arch/ia64/sn/kernel/mca.c b/arch/ia64/sn/kernel/mca.c
index 9ab684d..3db62f2 100644
--- a/arch/ia64/sn/kernel/mca.c
+++ b/arch/ia64/sn/kernel/mca.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/types.h>
@@ -137,7 +137,8 @@
static int __init sn_salinfo_init(void)
{
- salinfo_platform_oemdata = &sn_salinfo_platform_oemdata;
+ if (ia64_platform_is("sn2"))
+ salinfo_platform_oemdata = &sn_salinfo_platform_oemdata;
return 0;
}
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index e510dce..48645ac 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -67,6 +67,7 @@
extern void (*ia64_mark_idle) (int);
extern void snidle(int);
extern unsigned char acpi_kbd_controller_present;
+extern unsigned long long (*ia64_printk_clock)(void);
unsigned long sn_rtc_cycles_per_second;
EXPORT_SYMBOL(sn_rtc_cycles_per_second);
@@ -125,20 +126,6 @@
};
/*
- * This is here so we can use the CMOS detection in ide-probe.c to
- * determine what drives are present. In theory, we don't need this
- * as the auto-detection could be done via ide-probe.c:do_probe() but
- * in practice that would be much slower, which is painful when
- * running in the simulator. Note that passing zeroes in DRIVE_INFO
- * is sufficient (the IDE driver will autodetect the drive geometry).
- */
-#ifdef CONFIG_IA64_GENERIC
-extern char drive_info[4 * 16];
-#else
-char drive_info[4 * 16];
-#endif
-
-/*
* This routine can only be used during init, since
* smp_boot_data is an init data structure.
* We have to use smp_boot_data.cpu_phys_id to find
@@ -209,7 +196,7 @@
}
extern int platform_intr_list[];
-static int __initdata shub_1_1_found = 0;
+static int __initdata shub_1_1_found;
/*
* sn_check_for_wars
@@ -372,6 +359,16 @@
}
}
+static unsigned long sn2_rtc_initial;
+
+static unsigned long long ia64_sn2_printk_clock(void)
+{
+ unsigned long rtc_now = rtc_time();
+
+ return (rtc_now - sn2_rtc_initial) *
+ (1000000000 / sn_rtc_cycles_per_second);
+}
+
/**
* sn_setup - SN platform setup routine
* @cmdline_p: kernel command line
@@ -386,6 +383,7 @@
u32 version = sn_sal_rev();
extern void sn_cpu_init(void);
+ sn2_rtc_initial = rtc_time();
ia64_sn_plat_set_error_handling_features(); // obsolete
ia64_sn_set_os_feature(OSF_MCA_SLV_TO_OS_INIT_SLV);
ia64_sn_set_os_feature(OSF_FEAT_LOG_SBES);
@@ -437,19 +435,6 @@
*/
build_cnode_tables();
- /*
- * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard
- * support here so we don't have to listen to failed keyboard probe
- * messages.
- */
- if (version <= 0x0209 && acpi_kbd_controller_present) {
- printk(KERN_INFO "Disabling legacy keyboard support as prom "
- "is too old and doesn't provide FADT\n");
- acpi_kbd_controller_present = 0;
- }
-
- printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF);
-
status =
ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
&drift);
@@ -463,6 +448,21 @@
platform_intr_list[ACPI_INTERRUPT_CPEI] = IA64_CPE_VECTOR;
+ ia64_printk_clock = ia64_sn2_printk_clock;
+
+ /*
+ * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard
+ * support here so we don't have to listen to failed keyboard probe
+ * messages.
+ */
+ if (version <= 0x0209 && acpi_kbd_controller_present) {
+ printk(KERN_INFO "Disabling legacy keyboard support as prom "
+ "is too old and doesn't provide FADT\n");
+ acpi_kbd_controller_present = 0;
+ }
+
+ printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF);
+
/*
* we set the default root device to /dev/hda
* to make simulation easy
@@ -578,13 +578,17 @@
sn_prom_type = 2;
else
sn_prom_type = 1;
- printk("Running on medusa with %s PROM\n", (sn_prom_type == 1) ? "real" : "fake");
+ printk(KERN_INFO "Running on medusa with %s PROM\n",
+ (sn_prom_type == 1) ? "real" : "fake");
}
memset(pda, 0, sizeof(pda));
- if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2, &sn_hub_info->nasid_bitmask, &sn_hub_info->nasid_shift,
- &sn_system_size, &sn_sharing_domain_size, &sn_partition_id,
- &sn_coherency_id, &sn_region_size))
+ if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2,
+ &sn_hub_info->nasid_bitmask,
+ &sn_hub_info->nasid_shift,
+ &sn_system_size, &sn_sharing_domain_size,
+ &sn_partition_id, &sn_coherency_id,
+ &sn_region_size))
BUG();
sn_hub_info->as_shift = sn_hub_info->nasid_shift - 2;
@@ -716,7 +720,8 @@
for_each_online_node(node) {
kl_config_hdr_t *klgraph_header;
nasid = cnodeid_to_nasid(node);
- if ((klgraph_header = ia64_sn_get_klconfig_addr(nasid)) == NULL)
+ klgraph_header = ia64_sn_get_klconfig_addr(nasid);
+ if (klgraph_header == NULL)
BUG();
brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info);
while (brd) {
@@ -734,7 +739,7 @@
{
long cpu;
- for (cpu=0; cpu < NR_CPUS; cpu++)
+ for (cpu = 0; cpu < NR_CPUS; cpu++)
if (cpuid_to_nasid(cpu) == nasid &&
cpuid_to_slice(cpu) == slice)
return cpu;
diff --git a/arch/ia64/sn/kernel/sn2/Makefile b/arch/ia64/sn/kernel/sn2/Makefile
index 170bde4..99e1776 100644
--- a/arch/ia64/sn/kernel/sn2/Makefile
+++ b/arch/ia64/sn/kernel/sn2/Makefile
@@ -9,5 +9,7 @@
# sn2 specific kernel files
#
+CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
+
obj-y += cache.o io.o ptc_deadlock.o sn2_smp.o sn_proc_fs.o \
prominfo_proc.o timer.o timer_interrupt.o sn_hwperf.o
diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c
index 471bbaa..f153a4c 100644
--- a/arch/ia64/sn/kernel/sn2/sn2_smp.c
+++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c
@@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2000-2006 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/init.h>
@@ -46,104 +46,28 @@
static __cacheline_aligned DEFINE_SPINLOCK(sn2_global_ptc_lock);
-void sn2_ptc_deadlock_recovery(short *, short, int, volatile unsigned long *, unsigned long data0,
- volatile unsigned long *, unsigned long data1);
+void sn2_ptc_deadlock_recovery(short *, short, short, int, volatile unsigned long *, unsigned long,
+ volatile unsigned long *, unsigned long);
-#ifdef DEBUG_PTC
/*
- * ptctest:
- *
- * xyz - 3 digit hex number:
- * x - Force PTC purges to use shub:
- * 0 - no force
- * 1 - force
- * y - interupt enable
- * 0 - disable interrupts
- * 1 - leave interuupts enabled
- * z - type of lock:
- * 0 - global lock
- * 1 - node local lock
- * 2 - no lock
- *
- * Note: on shub1, only ptctest == 0 is supported. Don't try other values!
+ * Note: some is the following is captured here to make degugging easier
+ * (the macros make more sense if you see the debug patch - not posted)
*/
-
-static unsigned int sn2_ptctest = 0;
-
-static int __init ptc_test(char *str)
-{
- get_option(&str, &sn2_ptctest);
- return 1;
-}
-__setup("ptctest=", ptc_test);
-
-static inline int ptc_lock(unsigned long *flagp)
-{
- unsigned long opt = sn2_ptctest & 255;
-
- switch (opt) {
- case 0x00:
- spin_lock_irqsave(&sn2_global_ptc_lock, *flagp);
- break;
- case 0x01:
- spin_lock_irqsave(&sn_nodepda->ptc_lock, *flagp);
- break;
- case 0x02:
- local_irq_save(*flagp);
- break;
- case 0x10:
- spin_lock(&sn2_global_ptc_lock);
- break;
- case 0x11:
- spin_lock(&sn_nodepda->ptc_lock);
- break;
- case 0x12:
- break;
- default:
- BUG();
- }
- return opt;
-}
-
-static inline void ptc_unlock(unsigned long flags, int opt)
-{
- switch (opt) {
- case 0x00:
- spin_unlock_irqrestore(&sn2_global_ptc_lock, flags);
- break;
- case 0x01:
- spin_unlock_irqrestore(&sn_nodepda->ptc_lock, flags);
- break;
- case 0x02:
- local_irq_restore(flags);
- break;
- case 0x10:
- spin_unlock(&sn2_global_ptc_lock);
- break;
- case 0x11:
- spin_unlock(&sn_nodepda->ptc_lock);
- break;
- case 0x12:
- break;
- default:
- BUG();
- }
-}
-#else
-
#define sn2_ptctest 0
+#define local_node_uses_ptc_ga(sh1) ((sh1) ? 1 : 0)
+#define max_active_pio(sh1) ((sh1) ? 32 : 7)
+#define reset_max_active_on_deadlock() 1
+#define PTC_LOCK(sh1) ((sh1) ? &sn2_global_ptc_lock : &sn_nodepda->ptc_lock)
-static inline int ptc_lock(unsigned long *flagp)
+static inline void ptc_lock(int sh1, unsigned long *flagp)
{
- spin_lock_irqsave(&sn2_global_ptc_lock, *flagp);
- return 0;
+ spin_lock_irqsave(PTC_LOCK(sh1), *flagp);
}
-static inline void ptc_unlock(unsigned long flags, int opt)
+static inline void ptc_unlock(int sh1, unsigned long flags)
{
- spin_unlock_irqrestore(&sn2_global_ptc_lock, flags);
+ spin_unlock_irqrestore(PTC_LOCK(sh1), flags);
}
-#endif
struct ptc_stats {
unsigned long ptc_l;
@@ -151,27 +75,30 @@
unsigned long shub_ptc_flushes;
unsigned long nodes_flushed;
unsigned long deadlocks;
+ unsigned long deadlocks2;
unsigned long lock_itc_clocks;
unsigned long shub_itc_clocks;
unsigned long shub_itc_clocks_max;
+ unsigned long shub_ptc_flushes_not_my_mm;
};
static inline unsigned long wait_piowc(void)
{
- volatile unsigned long *piows, zeroval;
- unsigned long ws;
+ volatile unsigned long *piows;
+ unsigned long zeroval, ws;
piows = pda->pio_write_status_addr;
zeroval = pda->pio_write_status_val;
do {
cpu_relax();
} while (((ws = *piows) & SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK) != zeroval);
- return ws;
+ return (ws & SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK) != 0;
}
void sn_tlb_migrate_finish(struct mm_struct *mm)
{
- if (mm == current->mm)
+ /* flush_tlb_mm is inefficient if more than 1 users of mm */
+ if (mm == current->mm && mm && atomic_read(&mm->mm_users) == 1)
flush_tlb_mm(mm);
}
@@ -201,12 +128,14 @@
sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
unsigned long end, unsigned long nbits)
{
- int i, opt, shub1, cnode, mynasid, cpu, lcpu = 0, nasid, flushed = 0;
- int mymm = (mm == current->active_mm && current->mm);
+ int i, ibegin, shub1, cnode, mynasid, cpu, lcpu = 0, nasid;
+ int mymm = (mm == current->active_mm && mm == current->mm);
+ int use_cpu_ptcga;
volatile unsigned long *ptc0, *ptc1;
- unsigned long itc, itc2, flags, data0 = 0, data1 = 0, rr_value;
+ unsigned long itc, itc2, flags, data0 = 0, data1 = 0, rr_value, old_rr = 0;
short nasids[MAX_NUMNODES], nix;
nodemask_t nodes_flushed;
+ int active, max_active, deadlock;
nodes_clear(nodes_flushed);
i = 0;
@@ -267,41 +196,56 @@
mynasid = get_nasid();
+ use_cpu_ptcga = local_node_uses_ptc_ga(shub1);
+ max_active = max_active_pio(shub1);
itc = ia64_get_itc();
- opt = ptc_lock(&flags);
+ ptc_lock(shub1, &flags);
itc2 = ia64_get_itc();
+
__get_cpu_var(ptcstats).lock_itc_clocks += itc2 - itc;
__get_cpu_var(ptcstats).shub_ptc_flushes++;
__get_cpu_var(ptcstats).nodes_flushed += nix;
+ if (!mymm)
+ __get_cpu_var(ptcstats).shub_ptc_flushes_not_my_mm++;
+ if (use_cpu_ptcga && !mymm) {
+ old_rr = ia64_get_rr(start);
+ ia64_set_rr(start, (old_rr & 0xff) | (rr_value << 8));
+ ia64_srlz_d();
+ }
+
+ wait_piowc();
do {
if (shub1)
data1 = start | (1UL << SH1_PTC_1_START_SHFT);
else
data0 = (data0 & ~SH2_PTC_ADDR_MASK) | (start & SH2_PTC_ADDR_MASK);
- for (i = 0; i < nix; i++) {
+ deadlock = 0;
+ active = 0;
+ for (ibegin = 0, i = 0; i < nix; i++) {
nasid = nasids[i];
- if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid && mymm)) {
+ if (use_cpu_ptcga && unlikely(nasid == mynasid)) {
ia64_ptcga(start, nbits << 2);
ia64_srlz_i();
} else {
ptc0 = CHANGE_NASID(nasid, ptc0);
if (ptc1)
ptc1 = CHANGE_NASID(nasid, ptc1);
- pio_atomic_phys_write_mmrs(ptc0, data0, ptc1,
- data1);
- flushed = 1;
+ pio_atomic_phys_write_mmrs(ptc0, data0, ptc1, data1);
+ active++;
+ }
+ if (active >= max_active || i == (nix - 1)) {
+ if ((deadlock = wait_piowc())) {
+ sn2_ptc_deadlock_recovery(nasids, ibegin, i, mynasid, ptc0, data0, ptc1, data1);
+ if (reset_max_active_on_deadlock())
+ max_active = 1;
+ }
+ active = 0;
+ ibegin = i + 1;
}
}
- if (flushed
- && (wait_piowc() &
- (SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK))) {
- sn2_ptc_deadlock_recovery(nasids, nix, mynasid, ptc0, data0, ptc1, data1);
- }
-
start += (1UL << nbits);
-
} while (start < end);
itc2 = ia64_get_itc() - itc2;
@@ -309,7 +253,12 @@
if (itc2 > __get_cpu_var(ptcstats).shub_itc_clocks_max)
__get_cpu_var(ptcstats).shub_itc_clocks_max = itc2;
- ptc_unlock(flags, opt);
+ if (old_rr) {
+ ia64_set_rr(start, old_rr);
+ ia64_srlz_d();
+ }
+
+ ptc_unlock(shub1, flags);
preempt_enable();
}
@@ -321,27 +270,30 @@
* TLB flush transaction. The recovery sequence is somewhat tricky & is
* coded in assembly language.
*/
-void sn2_ptc_deadlock_recovery(short *nasids, short nix, int mynasid, volatile unsigned long *ptc0, unsigned long data0,
+void sn2_ptc_deadlock_recovery(short *nasids, short ib, short ie, int mynasid, volatile unsigned long *ptc0, unsigned long data0,
volatile unsigned long *ptc1, unsigned long data1)
{
- extern void sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long,
+ extern unsigned long sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long,
volatile unsigned long *, unsigned long, volatile unsigned long *, unsigned long);
short nasid, i;
- unsigned long *piows, zeroval;
+ unsigned long *piows, zeroval, n;
__get_cpu_var(ptcstats).deadlocks++;
piows = (unsigned long *) pda->pio_write_status_addr;
zeroval = pda->pio_write_status_val;
- for (i=0; i < nix; i++) {
+
+ for (i=ib; i <= ie; i++) {
nasid = nasids[i];
- if (!(sn2_ptctest & 3) && nasid == mynasid)
+ if (local_node_uses_ptc_ga(is_shub1()) && nasid == mynasid)
continue;
ptc0 = CHANGE_NASID(nasid, ptc0);
if (ptc1)
ptc1 = CHANGE_NASID(nasid, ptc1);
- sn2_ptc_deadlock_recovery_core(ptc0, data0, ptc1, data1, piows, zeroval);
+
+ n = sn2_ptc_deadlock_recovery_core(ptc0, data0, ptc1, data1, piows, zeroval);
+ __get_cpu_var(ptcstats).deadlocks2 += n;
}
}
@@ -452,20 +404,22 @@
cpu = *(loff_t *) data;
if (!cpu) {
- seq_printf(file, "# ptc_l change_rid shub_ptc_flushes shub_nodes_flushed deadlocks lock_nsec shub_nsec shub_nsec_max\n");
+ seq_printf(file,
+ "# cpu ptc_l newrid ptc_flushes nodes_flushed deadlocks lock_nsec shub_nsec shub_nsec_max not_my_mm deadlock2\n");
seq_printf(file, "# ptctest %d\n", sn2_ptctest);
}
if (cpu < NR_CPUS && cpu_online(cpu)) {
stat = &per_cpu(ptcstats, cpu);
- seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld %ld\n", cpu, stat->ptc_l,
+ seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld\n", cpu, stat->ptc_l,
stat->change_rid, stat->shub_ptc_flushes, stat->nodes_flushed,
stat->deadlocks,
1000 * stat->lock_itc_clocks / per_cpu(cpu_info, cpu).cyc_per_usec,
1000 * stat->shub_itc_clocks / per_cpu(cpu_info, cpu).cyc_per_usec,
- 1000 * stat->shub_itc_clocks_max / per_cpu(cpu_info, cpu).cyc_per_usec);
+ 1000 * stat->shub_itc_clocks_max / per_cpu(cpu_info, cpu).cyc_per_usec,
+ stat->shub_ptc_flushes_not_my_mm,
+ stat->deadlocks2);
}
-
return 0;
}
@@ -476,7 +430,7 @@
.show = sn2_ptc_seq_show
};
-int sn2_ptc_proc_open(struct inode *inode, struct file *file)
+static int sn2_ptc_proc_open(struct inode *inode, struct file *file)
{
return seq_open(file, &sn2_ptc_seq_ops);
}
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 19b54fb..70db21f 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2004-2005 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2004-2006 Silicon Graphics, Inc. All rights reserved.
*
* SGI Altix topology and hardware performance monitoring API.
* Mark Goodwin <markgw@sgi.com>.
@@ -973,6 +973,9 @@
{
int e;
+ if (!ia64_platform_is("sn2"))
+ return 0;
+
sn_hwperf_init();
/*
diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c
index 8d950c7..36e5437 100644
--- a/arch/ia64/sn/kernel/xpc_channel.c
+++ b/arch/ia64/sn/kernel/xpc_channel.c
@@ -447,7 +447,7 @@
nbytes = nentries * ch->msg_size;
ch->local_msgqueue = xpc_kmalloc_cacheline_aligned(nbytes,
- (GFP_KERNEL | GFP_DMA),
+ GFP_KERNEL,
&ch->local_msgqueue_base);
if (ch->local_msgqueue == NULL) {
continue;
@@ -455,7 +455,7 @@
memset(ch->local_msgqueue, 0, nbytes);
nbytes = nentries * sizeof(struct xpc_notify);
- ch->notify_queue = kmalloc(nbytes, (GFP_KERNEL | GFP_DMA));
+ ch->notify_queue = kmalloc(nbytes, GFP_KERNEL);
if (ch->notify_queue == NULL) {
kfree(ch->local_msgqueue_base);
ch->local_msgqueue = NULL;
@@ -502,7 +502,7 @@
nbytes = nentries * ch->msg_size;
ch->remote_msgqueue = xpc_kmalloc_cacheline_aligned(nbytes,
- (GFP_KERNEL | GFP_DMA),
+ GFP_KERNEL,
&ch->remote_msgqueue_base);
if (ch->remote_msgqueue == NULL) {
continue;
diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c
index c75f8ae..9cd460d 100644
--- a/arch/ia64/sn/kernel/xpc_main.c
+++ b/arch/ia64/sn/kernel/xpc_main.c
@@ -575,18 +575,21 @@
spin_lock_irqsave(&part->act_lock, irq_flags);
- pid = kernel_thread(xpc_activating, (void *) ((u64) partid), 0);
-
DBUG_ON(part->act_state != XPC_P_INACTIVE);
- if (pid > 0) {
- part->act_state = XPC_P_ACTIVATION_REQ;
- XPC_SET_REASON(part, xpcCloneKThread, __LINE__);
- } else {
- XPC_SET_REASON(part, xpcCloneKThreadFailed, __LINE__);
- }
+ part->act_state = XPC_P_ACTIVATION_REQ;
+ XPC_SET_REASON(part, xpcCloneKThread, __LINE__);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
+
+ pid = kernel_thread(xpc_activating, (void *) ((u64) partid), 0);
+
+ if (unlikely(pid <= 0)) {
+ spin_lock_irqsave(&part->act_lock, irq_flags);
+ part->act_state = XPC_P_INACTIVE;
+ XPC_SET_REASON(part, xpcCloneKThreadFailed, __LINE__);
+ spin_unlock_irqrestore(&part->act_lock, irq_flags);
+ }
}
diff --git a/arch/ia64/sn/pci/Makefile b/arch/ia64/sn/pci/Makefile
index 321576b..c694678 100644
--- a/arch/ia64/sn/pci/Makefile
+++ b/arch/ia64/sn/pci/Makefile
@@ -7,4 +7,6 @@
#
# Makefile for the sn pci general routines.
+CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
+
obj-y := pci_dma.o tioca_provider.o tioce_provider.o pcibr/
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 9bf9f23..5a36292 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -90,14 +90,14 @@
*/
node = pcibus_to_node(pdev->bus);
if (likely(node >=0)) {
- struct page *p = alloc_pages_node(node, GFP_ATOMIC, get_order(size));
+ struct page *p = alloc_pages_node(node, flags, get_order(size));
if (likely(p))
cpuaddr = page_address(p);
else
return NULL;
} else
- cpuaddr = (void *)__get_free_pages(GFP_ATOMIC, get_order(size));
+ cpuaddr = (void *)__get_free_pages(flags, get_order(size));
if (unlikely(!cpuaddr))
return NULL;
diff --git a/arch/ia64/sn/pci/pcibr/Makefile b/arch/ia64/sn/pci/pcibr/Makefile
index 1850c4a..3b403ea 100644
--- a/arch/ia64/sn/pci/pcibr/Makefile
+++ b/arch/ia64/sn/pci/pcibr/Makefile
@@ -7,5 +7,7 @@
#
# Makefile for the sn2 io routines.
+CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
+
obj-y += pcibr_dma.o pcibr_reg.o \
pcibr_ate.o pcibr_provider.o
diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c
index dbc8a39..be8b711 100644
--- a/arch/m32r/kernel/m32r_ksyms.c
+++ b/arch/m32r/kernel/m32r_ksyms.c
@@ -18,11 +18,6 @@
#include <asm/irq.h>
#include <asm/tlbflush.h>
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE)
-extern struct drive_info_struct drive_info;
-EXPORT_SYMBOL(drive_info);
-#endif
-
/* platform dependent support */
EXPORT_SYMBOL(boot_cpu_data);
EXPORT_SYMBOL(dump_fpu);
diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c
index c2e4dcc..d742037 100644
--- a/arch/m32r/kernel/setup.c
+++ b/arch/m32r/kernel/setup.c
@@ -37,12 +37,6 @@
extern void init_mmu(void);
#endif
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) \
- || defined(CONFIG_BLK_DEV_IDE_MODULE) \
- || defined(CONFIG_BLK_DEV_HD_MODULE)
-struct drive_info_struct { char dummy[32]; } drive_info;
-#endif
-
extern char _end[];
/*
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 99bf438..63c117d 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -39,6 +39,14 @@
asmlinkage void ret_from_fork(void);
+/*
+ * The following aren't currently used.
+ */
+void (*pm_idle)(void);
+EXPORT_SYMBOL(pm_idle);
+
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
/*
* The idle loop on an m68knommu..
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index c3e852e..767de84 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -595,6 +595,7 @@
select SYS_HAS_CPU_R5000
select SYS_HAS_CPU_R10000 if BROKEN
select SYS_HAS_CPU_RM7000
+ select SYS_HAS_CPU_NEVADA
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
help
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 2a9f2ef..6a57407 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -53,14 +53,17 @@
endif
CHECKFLAGS-y += -D__linux__ -D__mips__ \
+ -D_MIPS_SZINT=32 \
-D_ABIO32=1 \
-D_ABIN32=2 \
-D_ABI64=3
CHECKFLAGS-$(CONFIG_32BIT) += -D_MIPS_SIM=_ABIO32 \
-D_MIPS_SZLONG=32 \
+ -D_MIPS_SZPTR=32 \
-D__PTRDIFF_TYPE__=int
CHECKFLAGS-$(CONFIG_64BIT) += -m64 -D_MIPS_SIM=_ABI64 \
-D_MIPS_SZLONG=64 \
+ -D_MIPS_SZPTR=64 \
-D__PTRDIFF_TYPE__="long int"
CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN) += -D__MIPSEB__
CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN) += -D__MIPSEL__
@@ -166,79 +169,97 @@
#
cflags-$(CONFIG_CPU_R3000) += \
$(call set_gccflags,r3000,mips1,r3000,mips1,mips1)
+CHECKFLAGS-$(CONFIG_CPU_R3000) += -D_MIPS_ISA=_MIPS_ISA_MIPS1
cflags-$(CONFIG_CPU_TX39XX) += \
$(call set_gccflags,r3900,mips1,r3000,mips1,mips1)
+CHECKFLAGS-$(CONFIG_CPU_TX39XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS1
cflags-$(CONFIG_CPU_R6000) += \
$(call set_gccflags,r6000,mips2,r6000,mips2,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_R6000) += -D_MIPS_ISA=_MIPS_ISA_MIPS2
cflags-$(CONFIG_CPU_R4300) += \
$(call set_gccflags,r4300,mips3,r4300,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_R4300) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
cflags-$(CONFIG_CPU_VR41XX) += \
$(call set_gccflags,r4100,mips3,r4600,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_VR41XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
cflags-$(CONFIG_CPU_R4X00) += \
$(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_R4X00) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
cflags-$(CONFIG_CPU_TX49XX) += \
$(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_TX49XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
cflags-$(CONFIG_CPU_MIPS32_R1) += \
$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_MIPS32_R1) += -D_MIPS_ISA=_MIPS_ISA_MIPS32
cflags-$(CONFIG_CPU_MIPS32_R2) += \
$(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_MIPS32_R2) += -D_MIPS_ISA=_MIPS_ISA_MIPS32
cflags-$(CONFIG_CPU_MIPS64_R1) += \
$(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_MIPS64_R1) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
cflags-$(CONFIG_CPU_MIPS64_R2) += \
$(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_MIPS64_R2) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
cflags-$(CONFIG_CPU_R5000) += \
$(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_R5000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_R5432) += \
$(call set_gccflags,r5400,mips4,r5000,mips4,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_R5432) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_NEVADA) += \
$(call set_gccflags,rm5200,mips4,r5000,mips4,mips2) \
-Wa,--trap
-# $(call cc-option,-mmad)
+CHECKFLAGS-$(CONFIG_CPU_NEVADA) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_RM7000) += \
$(call set_gccflags,rm7000,mips4,r5000,mips4,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_RM7000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_RM9000) += \
$(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_RM9000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_SB1) += \
$(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_SB1) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
cflags-$(CONFIG_CPU_R8000) += \
$(call set_gccflags,r8000,mips4,r8000,mips4,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_R8000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_R10000) += \
$(call set_gccflags,r10000,mips4,r8000,mips4,mips2) \
-Wa,--trap
+CHECKFLAGS-$(CONFIG_CPU_R10000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
ifdef CONFIG_CPU_SB1
ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
@@ -369,7 +390,7 @@
# Cobalt Server
#
core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
-cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/cobalt
+cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/mach-cobalt
load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
#
diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c
index 65b84db..4ffcced 100644
--- a/arch/mips/au1000/common/reset.c
+++ b/arch/mips/au1000/common/reset.c
@@ -151,7 +151,7 @@
}
set_c0_status(ST0_BEV | ST0_ERL);
- set_c0_config(CONF_CM_UNCACHED);
+ change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
flush_cache_all();
write_c0_wired(0);
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index 08c8c85..eb155c0 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -33,6 +33,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
@@ -125,7 +126,7 @@
#endif
_machine_restart = au1000_restart;
_machine_halt = au1000_halt;
- _machine_power_off = au1000_power_off;
+ pm_power_off = au1000_power_off;
board_time_init = au1xxx_time_init;
board_timer_setup = au1xxx_timer_setup;
diff --git a/arch/mips/cobalt/int-handler.S b/arch/mips/cobalt/int-handler.S
index f92608e..e75d5e3 100644
--- a/arch/mips/cobalt/int-handler.S
+++ b/arch/mips/cobalt/int-handler.S
@@ -8,7 +8,7 @@
*/
#include <asm/asm.h>
#include <asm/mipsregs.h>
-#include <asm/cobalt/cobalt.h>
+#include <asm/mach-cobalt/cobalt.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c
index 0d90851..f9a1088 100644
--- a/arch/mips/cobalt/irq.c
+++ b/arch/mips/cobalt/irq.c
@@ -18,7 +18,7 @@
#include <asm/gt64120.h>
#include <asm/ptrace.h>
-#include <asm/cobalt/cobalt.h>
+#include <asm/mach-cobalt/cobalt.h>
extern void cobalt_handle_int(void);
diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c
index 805a0e8..753dfcc 100644
--- a/arch/mips/cobalt/reset.c
+++ b/arch/mips/cobalt/reset.c
@@ -16,7 +16,7 @@
#include <asm/reboot.h>
#include <asm/system.h>
#include <asm/mipsregs.h>
-#include <asm/cobalt/cobalt.h>
+#include <asm/mach-cobalt/cobalt.h>
void cobalt_machine_halt(void)
{
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index d358a11..b9713a7 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1996, 1997, 2004, 05 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
*
*/
@@ -13,6 +13,7 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/pm.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
@@ -25,7 +26,7 @@
#include <asm/gt64120.h>
#include <asm/serial.h>
-#include <asm/cobalt/cobalt.h>
+#include <asm/mach-cobalt/cobalt.h>
extern void cobalt_machine_restart(char *command);
extern void cobalt_machine_halt(void);
@@ -99,7 +100,7 @@
_machine_restart = cobalt_machine_restart;
_machine_halt = cobalt_machine_halt;
- _machine_power_off = cobalt_machine_power_off;
+ pm_power_off = cobalt_machine_power_off;
board_timer_setup = cobalt_timer_setup;
@@ -139,7 +140,7 @@
uart.type = PORT_UNKNOWN;
uart.uartclk = 18432000;
uart.irq = COBALT_SERIAL_IRQ;
- uart.flags = STD_COM_FLAGS;
+ uart.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
uart.iobase = 0xc800000;
uart.iotype = UPIO_PORT;
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index 967e7ac..a34db6e 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -102,6 +102,7 @@
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
CONFIG_SYS_HAS_CPU_RM7000=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig
index dee4460..c02beca 100644
--- a/arch/mips/configs/qemu_defconfig
+++ b/arch/mips/configs/qemu_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:07:00 2005
+# Linux kernel version: 2.6.16-rc2
+# Fri Feb 3 17:14:27 2006
#
CONFIG_MIPS=y
@@ -147,26 +147,27 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
+CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_SHMEM is not set
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -266,11 +267,7 @@
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -323,7 +320,7 @@
#
# SCSI device support
#
-CONFIG_RAID_ATTRS=y
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -366,24 +363,16 @@
#
# PHY device support
#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_DM9000 is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
@@ -479,6 +468,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -518,6 +508,12 @@
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -592,11 +588,14 @@
#
#
+# EDAC - error detection and reporting (RAS)
+#
+
+#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
@@ -677,6 +676,7 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
@@ -690,31 +690,7 @@
#
# Cryptographic options
#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
@@ -724,8 +700,6 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/mips/ddb5xxx/ddb5074/setup.c b/arch/mips/ddb5xxx/ddb5074/setup.c
index 11535be..91456b0 100644
--- a/arch/mips/ddb5xxx/ddb5074/setup.c
+++ b/arch/mips/ddb5xxx/ddb5074/setup.c
@@ -14,6 +14,7 @@
#include <linux/ide.h>
#include <linux/ioport.h>
#include <linux/irq.h>
+#include <linux/pm.h>
#include <asm/addrspace.h>
#include <asm/bcache.h>
@@ -95,7 +96,7 @@
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
- _machine_power_off = ddb_machine_power_off;
+ pm_power_off = ddb_machine_power_off;
ddb_out32(DDB_BAR0, 0);
diff --git a/arch/mips/ddb5xxx/ddb5476/setup.c b/arch/mips/ddb5xxx/ddb5476/setup.c
index f4e480a..c902ade 100644
--- a/arch/mips/ddb5xxx/ddb5476/setup.c
+++ b/arch/mips/ddb5xxx/ddb5476/setup.c
@@ -11,6 +11,7 @@
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/pci.h>
+#include <linux/pm.h>
#include <asm/addrspace.h>
#include <asm/bcache.h>
@@ -133,7 +134,7 @@
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
- _machine_power_off = ddb_machine_power_off;
+ pm_power_off = ddb_machine_power_off;
/* request io port/mem resources */
if (request_resource(&ioport_resource, &ddb5476_ioport.dma1) ||
diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c
index 8116335..2f56603 100644
--- a/arch/mips/ddb5xxx/ddb5477/setup.c
+++ b/arch/mips/ddb5xxx/ddb5477/setup.c
@@ -26,6 +26,7 @@
#include <linux/major.h>
#include <linux/kdev_t.h>
#include <linux/root_dev.h>
+#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
@@ -182,7 +183,7 @@
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
- _machine_power_off = ddb_machine_power_off;
+ pm_power_off = ddb_machine_power_off;
/* setup resource limits */
ioport_resource.end = DDB_PCI0_IO_SIZE + DDB_PCI1_IO_SIZE - 1;
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index 9ef54fe..7c1ca8f 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -17,6 +17,7 @@
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/types.h>
+#include <linux/pm.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
@@ -158,7 +159,7 @@
_machine_restart = dec_machine_restart;
_machine_halt = dec_machine_halt;
- _machine_power_off = dec_machine_power_off;
+ pm_power_off = dec_machine_power_off;
ioport_resource.start = ~0UL;
ioport_resource.end = 0UL;
diff --git a/arch/mips/gt64120/ev64120/setup.c b/arch/mips/gt64120/ev64120/setup.c
index 98b5a96..6d859d1 100644
--- a/arch/mips/gt64120/ev64120/setup.c
+++ b/arch/mips/gt64120/ev64120/setup.c
@@ -34,6 +34,8 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/timex.h>
+#include <linux/pm.h>
+
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/io.h>
@@ -73,7 +75,7 @@
{
_machine_restart = galileo_machine_restart;
_machine_halt = galileo_machine_halt;
- _machine_power_off = galileo_machine_power_off;
+ pm_power_off = galileo_machine_power_off;
board_time_init = gt64120_time_init;
set_io_port_base(KSEG1);
diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c
index 0d07c33..20b65d3 100644
--- a/arch/mips/gt64120/momenco_ocelot/setup.c
+++ b/arch/mips/gt64120/momenco_ocelot/setup.c
@@ -4,7 +4,7 @@
* BRIEF MODULE DESCRIPTION
* Momentum Computer Ocelot (CP7000) - board dependent boot routines
*
- * Copyright (C) 1996, 1997, 2001 Ralf Baechle
+ * Copyright (C) 1996, 1997, 2001, 06 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2000 RidgeRun, Inc.
* Copyright (C) 2001 Red Hat, Inc.
* Copyright (C) 2002 Momentum Computer
@@ -47,6 +47,8 @@
#include <linux/pci.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
+#include <linux/pm.h>
+
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
@@ -159,7 +161,7 @@
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
- _machine_power_off = momenco_ocelot_power_off;
+ pm_power_off = momenco_ocelot_power_off;
/*
* initrd_start = (ulong)ocelot_initrd_start;
diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c
index 062429d..fc73c8d 100644
--- a/arch/mips/ite-boards/generic/it8172_setup.c
+++ b/arch/mips/ite-boards/generic/it8172_setup.c
@@ -34,6 +34,7 @@
#include <linux/major.h>
#include <linux/kdev_t.h>
#include <linux/root_dev.h>
+#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/time.h>
@@ -125,7 +126,7 @@
_machine_restart = it8172_restart;
_machine_halt = it8172_halt;
- _machine_power_off = it8172_power_off;
+ pm_power_off = it8172_power_off;
/*
* IO/MEM resources.
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index 044df9d..4036dc4 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -19,6 +19,8 @@
#include <linux/console.h>
#include <linux/fb.h>
#include <linux/ide.h>
+#include <linux/pm.h>
+
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/jazz.h>
@@ -79,7 +81,7 @@
_machine_restart = jazz_machine_restart;
_machine_halt = jazz_machine_halt;
- _machine_power_off = jazz_machine_power_off;
+ pm_power_off = jazz_machine_power_off;
#warning "Somebody should check if screen_info is ok for Jazz."
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
index 4763957..9359cc4 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/jmr3927/rbhma3100/setup.c
@@ -44,6 +44,7 @@
#include <linux/ioport.h>
#include <linux/param.h> /* for HZ */
#include <linux/delay.h>
+#include <linux/pm.h>
#ifdef CONFIG_SERIAL_TXX9
#include <linux/tty.h>
#include <linux/serial.h>
@@ -211,7 +212,7 @@
_machine_restart = jmr3927_machine_restart;
_machine_halt = jmr3927_machine_halt;
- _machine_power_off = jmr3927_machine_power_off;
+ pm_power_off = jmr3927_machine_power_off;
/*
* IO/MEM resources.
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index fac48ad..292f8b2 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -2,8 +2,8 @@
* Processor capabilities determination functions.
*
* Copyright (C) xxxx the Anonymous
+ * Copyright (C) 1994 - 2006 Ralf Baechle
* Copyright (C) 2003, 2004 Maciej W. Rozycki
- * Copyright (C) 1994 - 2003 Ralf Baechle
* Copyright (C) 2001, 2004 MIPS Inc.
*
* This program is free software; you can redistribute it and/or
@@ -641,10 +641,9 @@
switch (c->processor_id & 0xff00) {
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
-#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
/* FPU in pass1 is known to have issues. */
- c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
-#endif
+ if ((c->processor_id & 0xff) < 0x20)
+ c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
break;
case PRID_IMP_SB1A:
c->cputype = CPU_SB1A;
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
index 96d18c4..d4f88e0 100644
--- a/arch/mips/kernel/gdb-stub.c
+++ b/arch/mips/kernel/gdb-stub.c
@@ -178,7 +178,7 @@
*/
static DEFINE_SPINLOCK(kgdb_lock);
static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
- [0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED;
+ [0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED,
};
/*
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index aa18a8b..13f22d1 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -233,11 +233,11 @@
NESTED(nmi_handler, PT_SIZE, sp)
.set push
.set noat
- .set mips3
SAVE_ALL
move a0, sp
jal nmi_exception_handler
RESTORE_ALL
+ .set mips3
eret
.set pop
END(nmi_handler)
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index fa98f10..5232fc7 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -4,6 +4,7 @@
* for more details.
*
* Copyright (C) 1994 - 1999, 2000 by Ralf Baechle and others.
+ * Copyright (C) 2005, 2006 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 2004 Thiemo Seufer
*/
@@ -58,8 +59,8 @@
}
}
-extern int do_signal(sigset_t *oldset, struct pt_regs *regs);
-extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
+extern void do_signal(struct pt_regs *regs);
+extern void do_signal32(struct pt_regs *regs);
/*
* Native o32 and N64 ABI without DSP ASE
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index 0c82b25..0d5cf97 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -88,7 +88,7 @@
ret = -EIO;
if (copied != sizeof(tmp))
break;
- ret = put_user(tmp, (unsigned int *) (unsigned long) data);
+ ret = put_user(tmp, (unsigned int __user *) (unsigned long) data);
break;
}
@@ -174,8 +174,10 @@
case FPC_EIR: { /* implementation / version register */
unsigned int flags;
- if (!cpu_has_fpu)
+ if (!cpu_has_fpu) {
+ tmp = 0;
break;
+ }
preempt_disable();
if (cpu_has_mipsmt) {
@@ -194,15 +196,18 @@
preempt_enable();
break;
}
- case DSP_BASE ... DSP_BASE + 5:
+ case DSP_BASE ... DSP_BASE + 5: {
+ dspreg_t *dregs;
+
if (!cpu_has_dsp) {
tmp = 0;
ret = -EIO;
goto out_tsk;
}
- dspreg_t *dregs = __get_dsp_regs(child);
+ dregs = __get_dsp_regs(child);
tmp = (unsigned long) (dregs[addr - DSP_BASE]);
break;
+ }
case DSP_CONTROL:
if (!cpu_has_dsp) {
tmp = 0;
@@ -216,7 +221,7 @@
ret = -EIO;
goto out_tsk;
}
- ret = put_user(tmp, (unsigned *) (unsigned long) data);
+ ret = put_user(tmp, (unsigned __user *) (unsigned long) data);
break;
}
@@ -304,15 +309,18 @@
else
child->thread.fpu.soft.fcr31 = data;
break;
- case DSP_BASE ... DSP_BASE + 5:
+ case DSP_BASE ... DSP_BASE + 5: {
+ dspreg_t *dregs;
+
if (!cpu_has_dsp) {
ret = -EIO;
break;
}
- dspreg_t *dregs = __get_dsp_regs(child);
+ dregs = __get_dsp_regs(child);
dregs[addr - DSP_BASE] = data;
break;
+ }
case DSP_CONTROL:
if (!cpu_has_dsp) {
ret = -EIO;
diff --git a/arch/mips/kernel/reset.c b/arch/mips/kernel/reset.c
index 5e37df31..621037d 100644
--- a/arch/mips/kernel/reset.c
+++ b/arch/mips/kernel/reset.c
@@ -3,17 +3,16 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2001 by Ralf Baechle
+ * Copyright (C) 2001, 06 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2001 MIPS Technologies, Inc.
*/
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/pm.h>
#include <linux/types.h>
#include <linux/reboot.h>
-#include <asm/reboot.h>
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
+#include <asm/reboot.h>
/*
* Urgs ... Too many MIPS machines to handle this in a generic way.
@@ -22,23 +21,22 @@
*/
void (*_machine_restart)(char *command);
void (*_machine_halt)(void);
-void (*_machine_power_off)(void);
+void (*pm_power_off)(void);
void machine_restart(char *command)
{
- _machine_restart(command);
+ if (_machine_restart)
+ _machine_restart(command);
}
void machine_halt(void)
{
- _machine_halt();
+ if (_machine_halt)
+ _machine_halt();
}
void machine_power_off(void)
{
if (pm_power_off)
pm_power_off();
-
- _machine_power_off();
}
-
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 1d85511..986a9cf 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2005, 06 Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
@@ -20,9 +21,12 @@
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/poll.h>
#include <linux/sched.h>
#include <linux/wait.h>
+
#include <asm/mipsmtregs.h>
#include <asm/bitops.h>
#include <asm/cpu.h>
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index a42e0e8..d7c4a38 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -617,6 +617,23 @@
sys sys_inotify_init 0
sys sys_inotify_add_watch 3 /* 4285 */
sys sys_inotify_rm_watch 2
+ sys sys_migrate_pages 4
+ sys sys_openat 4
+ sys sys_mkdirat 3
+ sys sys_mknodat 4 /* 4290 */
+ sys sys_fchownat 5
+ sys sys_futimesat 3
+ sys sys_newfstatat 4
+ sys sys_unlinkat 3
+ sys sys_renameat 4 /* 4295 */
+ sys sys_linkat 4
+ sys sys_symlinkat 3
+ sys sys_readlinkat 4
+ sys sys_fchmodat 3
+ sys sys_faccessat 3 /* 4300 */
+ sys sys_pselect6 6
+ sys sys_ppoll 5
+ sys sys_unshare 1
.endm
/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 47bfbd4..98bf25d 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -443,3 +443,20 @@
PTR sys_inotify_init
PTR sys_inotify_add_watch
PTR sys_inotify_rm_watch /* 5245 */
+ PTR sys_migrate_pages
+ PTR sys_openat
+ PTR sys_mkdirat
+ PTR sys_mknodat
+ PTR sys_fchownat /* 5250 */
+ PTR sys_futimesat
+ PTR sys_newfstatat
+ PTR sys_unlinkat
+ PTR sys_renameat
+ PTR sys_linkat /* 5255 */
+ PTR sys_symlinkat
+ PTR sys_readlinkat
+ PTR sys_fchmodat
+ PTR sys_faccessat
+ PTR sys_pselect6 /* 5260 */
+ PTR sys_ppoll
+ PTR sys_unshare
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index b465ced..bc4980c 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -369,3 +369,20 @@
PTR sys_inotify_init
PTR sys_inotify_add_watch
PTR sys_inotify_rm_watch
+ PTR sys_migrate_pages /* 6250 */
+ PTR sys_openat
+ PTR sys_mkdirat
+ PTR sys_mknodat
+ PTR sys_fchownat
+ PTR sys_futimesat /* 6255 */
+ PTR sys_newfstatat
+ PTR sys_unlinkat
+ PTR sys_renameat
+ PTR sys_linkat
+ PTR sys_symlinkat /* 6260 */
+ PTR sys_readlinkat
+ PTR sys_fchmodat
+ PTR sys_faccessat
+ PTR sys_pselect6
+ PTR sys_ppoll /* 6265 */
+ PTR sys_unshare
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 3d338ca..5b04140 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -491,4 +491,21 @@
PTR sys_inotify_init
PTR sys_inotify_add_watch /* 4285 */
PTR sys_inotify_rm_watch
+ PTR sys_migrate_pages
+ PTR compat_sys_openat
+ PTR sys_mkdirat
+ PTR sys_mknodat /* 4290 */
+ PTR sys_fchownat
+ PTR compat_sys_futimesat
+ PTR compat_sys_newfstatat
+ PTR sys_unlinkat
+ PTR sys_renameat /* 4295 */
+ PTR sys_linkat
+ PTR sys_symlinkat
+ PTR sys_readlinkat
+ PTR sys_fchmodat
+ PTR sys_faccessat /* 4300 */
+ PTR sys_pselect6
+ PTR sys_ppoll
+ PTR sys_unshare
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index 0f66ae58..0fbc492 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -11,7 +11,7 @@
#include <linux/config.h>
static inline int
-setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
+setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
{
int err = 0;
@@ -82,7 +82,7 @@
}
static inline int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
{
unsigned int used_math;
unsigned long treg;
@@ -157,7 +157,7 @@
/*
* Determine which stack to use..
*/
-static inline void *
+static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
{
unsigned long sp;
@@ -176,7 +176,7 @@
if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0))
sp = current->sas_ss_sp + current->sas_ss_size;
- return (void *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? 32 : ALMASK));
+ return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? 32 : ALMASK));
}
static inline int install_sigtramp(unsigned int __user *tramp,
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 7d1800f..c974cc9 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -39,8 +39,6 @@
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-int do_signal(sigset_t *oldset, struct pt_regs *regs);
-
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
@@ -50,7 +48,7 @@
__attribute_used__ noinline static int
_sys_sigsuspend(nabi_no_regargs struct pt_regs regs)
{
- sigset_t saveset, newset;
+ sigset_t newset;
sigset_t __user *uset;
uset = (sigset_t __user *) regs.regs[4];
@@ -59,19 +57,15 @@
sigdelsetmask(&newset, ~_BLOCKABLE);
spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
current->blocked = newset;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- regs.regs[2] = EINTR;
- regs.regs[7] = 1;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(&saveset, ®s))
- return -EINTR;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
}
#endif
@@ -79,7 +73,7 @@
__attribute_used__ noinline static int
_sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
{
- sigset_t saveset, newset;
+ sigset_t newset;
sigset_t __user *unewset;
size_t sigsetsize;
@@ -94,19 +88,15 @@
sigdelsetmask(&newset, ~_BLOCKABLE);
spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
current->blocked = newset;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- regs.regs[2] = EINTR;
- regs.regs[7] = 1;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(&saveset, ®s))
- return -EINTR;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
}
#ifdef CONFIG_TRAD_SIGNALS
@@ -199,10 +189,10 @@
__attribute_used__ noinline static void
_sys_sigreturn(nabi_no_regargs struct pt_regs regs)
{
- struct sigframe *frame;
+ struct sigframe __user *frame;
sigset_t blocked;
- frame = (struct sigframe *) regs.regs[29];
+ frame = (struct sigframe __user *) regs.regs[29];
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&blocked, &frame->sf_mask, sizeof(blocked)))
@@ -236,11 +226,11 @@
__attribute_used__ noinline static void
_sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
{
- struct rt_sigframe *frame;
+ struct rt_sigframe __user *frame;
sigset_t set;
stack_t st;
- frame = (struct rt_sigframe *) regs.regs[29];
+ frame = (struct rt_sigframe __user *) regs.regs[29];
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set)))
@@ -259,7 +249,7 @@
goto badframe;
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
- do_sigaltstack(&st, NULL, regs.regs[29]);
+ do_sigaltstack((stack_t __user *)&st, NULL, regs.regs[29]);
/*
* Don't let your children do this ...
@@ -279,7 +269,7 @@
int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set)
{
- struct sigframe *frame;
+ struct sigframe __user *frame;
int err = 0;
frame = get_sigframe(ka, regs, sizeof(*frame));
@@ -315,18 +305,18 @@
current->comm, current->pid,
frame, regs->cp0_epc, frame->regs[31]);
#endif
- return 1;
+ return 0;
give_sigsegv:
force_sigsegv(signr, current);
- return 0;
+ return -EFAULT;
}
#endif
int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set, siginfo_t *info)
{
- struct rt_sigframe *frame;
+ struct rt_sigframe __user *frame;
int err = 0;
frame = get_sigframe(ka, regs, sizeof(*frame));
@@ -340,7 +330,7 @@
/* Create the ucontext. */
err |= __put_user(0, &frame->rs_uc.uc_flags);
- err |= __put_user(0, &frame->rs_uc.uc_link);
+ err |= __put_user(NULL, &frame->rs_uc.uc_link);
err |= __put_user((void *)current->sas_ss_sp,
&frame->rs_uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->regs[29]),
@@ -375,11 +365,11 @@
current->comm, current->pid,
frame, regs->cp0_epc, regs->regs[31]);
#endif
- return 1;
+ return 0;
give_sigsegv:
force_sigsegv(signr, current);
- return 0;
+ return -EFAULT;
}
static inline int handle_signal(unsigned long sig, siginfo_t *info,
@@ -393,7 +383,7 @@
regs->regs[2] = EINTR;
break;
case ERESTARTSYS:
- if(!(ka->sa.sa_flags & SA_RESTART)) {
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->regs[2] = EINTR;
break;
}
@@ -420,9 +410,10 @@
return ret;
}
-int do_signal(sigset_t *oldset, struct pt_regs *regs)
+void do_signal(struct pt_regs *regs)
{
struct k_sigaction ka;
+ sigset_t *oldset;
siginfo_t info;
int signr;
@@ -432,17 +423,31 @@
* if so.
*/
if (!user_mode(regs))
- return 1;
+ return;
if (try_to_freeze())
goto no_signal;
- if (!oldset)
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
oldset = ¤t->blocked;
+
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0)
- return handle_signal(signr, &info, &ka, oldset, regs);
+ if (signr > 0) {
+ /* Whee! Actually deliver the signal. */
+ if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+ /*
+ * A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
+ }
no_signal:
/*
@@ -463,18 +468,25 @@
regs->cp0_epc -= 4;
}
}
- return 0;
+
+ /*
+ * If there's no signal to deliver, we just put the saved sigmask
+ * back
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
}
/*
* notification of userspace execution resumption
- * - triggered by current->work.notify_resume
+ * - triggered by the TIF_WORK_MASK flags
*/
-asmlinkage void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
+asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
__u32 thread_info_flags)
{
/* deal with pending signal delivery */
- if (thread_info_flags & _TIF_SIGPENDING) {
- current->thread.abi->do_signal(oldset, regs);
- }
+ if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+ current->thread.abi->do_signal(regs);
}
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 98b185b..da3271e 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -144,7 +144,7 @@
extern void __put_sigset_unknown_nsig(void);
extern void __get_sigset_unknown_nsig(void);
-static inline int put_sigset(const sigset_t *kbuf, compat_sigset_t *ubuf)
+static inline int put_sigset(const sigset_t *kbuf, compat_sigset_t __user *ubuf)
{
int err = 0;
@@ -269,7 +269,7 @@
if (!access_ok(VERIFY_READ, act, sizeof(*act)))
return -EFAULT;
err |= __get_user(handler, &act->sa_handler);
- new_ka.sa.sa_handler = (void*)(s64)handler;
+ new_ka.sa.sa_handler = (void __user *)(s64)handler;
err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
err |= __get_user(mask, &act->sa_mask.sig[0]);
if (err)
@@ -299,8 +299,8 @@
asmlinkage int sys32_sigaltstack(nabi_no_regargs struct pt_regs regs)
{
- const stack32_t *uss = (const stack32_t *) regs.regs[4];
- stack32_t *uoss = (stack32_t *) regs.regs[5];
+ const stack32_t __user *uss = (const stack32_t __user *) regs.regs[4];
+ stack32_t __user *uoss = (stack32_t __user *) regs.regs[5];
unsigned long usp = regs.regs[29];
stack_t kss, koss;
int ret, err = 0;
@@ -319,7 +319,8 @@
}
set_fs (KERNEL_DS);
- ret = do_sigaltstack(uss ? &kss : NULL , uoss ? &koss : NULL, usp);
+ ret = do_sigaltstack(uss ? (stack_t __user *)&kss : NULL,
+ uoss ? (stack_t __user *)&koss : NULL, usp);
set_fs (old_fs);
if (!ret && uoss) {
@@ -335,7 +336,7 @@
return ret;
}
-static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 *sc)
+static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 __user *sc)
{
u32 used_math;
int err = 0;
@@ -420,7 +421,7 @@
#endif
};
-int copy_siginfo_to_user32(compat_siginfo_t *to, siginfo_t *from)
+int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
{
int err;
@@ -455,7 +456,7 @@
err |= __put_user(from->si_uid, &to->si_uid);
break;
case __SI_FAULT >> 16:
- err |= __put_user((long)from->si_addr, &to->si_addr);
+ err |= __put_user((unsigned long)from->si_addr, &to->si_addr);
break;
case __SI_POLL >> 16:
err |= __put_user(from->si_band, &to->si_band);
@@ -476,10 +477,10 @@
__attribute_used__ noinline static void
_sys32_sigreturn(nabi_no_regargs struct pt_regs regs)
{
- struct sigframe *frame;
+ struct sigframe __user *frame;
sigset_t blocked;
- frame = (struct sigframe *) regs.regs[29];
+ frame = (struct sigframe __user *) regs.regs[29];
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&blocked, &frame->sf_mask, sizeof(blocked)))
@@ -512,13 +513,13 @@
__attribute_used__ noinline static void
_sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
{
- struct rt_sigframe32 *frame;
+ struct rt_sigframe32 __user *frame;
mm_segment_t old_fs;
sigset_t set;
stack_t st;
s32 sp;
- frame = (struct rt_sigframe32 *) regs.regs[29];
+ frame = (struct rt_sigframe32 __user *) regs.regs[29];
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set)))
@@ -546,7 +547,7 @@
call it and ignore errors. */
old_fs = get_fs();
set_fs (KERNEL_DS);
- do_sigaltstack(&st, NULL, regs.regs[29]);
+ do_sigaltstack((stack_t __user *)&st, NULL, regs.regs[29]);
set_fs (old_fs);
/*
@@ -564,7 +565,7 @@
}
static inline int setup_sigcontext32(struct pt_regs *regs,
- struct sigcontext32 *sc)
+ struct sigcontext32 __user *sc)
{
int err = 0;
@@ -623,8 +624,9 @@
/*
* Determine which stack to use..
*/
-static inline void *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
- size_t frame_size)
+static inline void __user *get_sigframe(struct k_sigaction *ka,
+ struct pt_regs *regs,
+ size_t frame_size)
{
unsigned long sp;
@@ -642,13 +644,13 @@
if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0))
sp = current->sas_ss_sp + current->sas_ss_size;
- return (void *)((sp - frame_size) & ALMASK);
+ return (void __user *)((sp - frame_size) & ALMASK);
}
int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set)
{
- struct sigframe *frame;
+ struct sigframe __user *frame;
int err = 0;
frame = get_sigframe(ka, regs, sizeof(*frame));
@@ -692,17 +694,17 @@
current->comm, current->pid,
frame, regs->cp0_epc, frame->sf_code);
#endif
- return 1;
+ return 0;
give_sigsegv:
force_sigsegv(signr, current);
- return 0;
+ return -EFAULT;
}
int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set, siginfo_t *info)
{
- struct rt_sigframe32 *frame;
+ struct rt_sigframe32 __user *frame;
int err = 0;
s32 sp;
@@ -763,11 +765,11 @@
current->comm, current->pid,
frame, regs->cp0_epc, frame->rs_code);
#endif
- return 1;
+ return 0;
give_sigsegv:
force_sigsegv(signr, current);
- return 0;
+ return -EFAULT;
}
static inline int handle_signal(unsigned long sig, siginfo_t *info,
@@ -855,7 +857,7 @@
}
asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 *act,
- struct sigaction32 *oact,
+ struct sigaction32 __user *oact,
unsigned int sigsetsize)
{
struct k_sigaction new_sa, old_sa;
@@ -872,7 +874,7 @@
if (!access_ok(VERIFY_READ, act, sizeof(*act)))
return -EFAULT;
err |= __get_user(handler, &act->sa_handler);
- new_sa.sa.sa_handler = (void*)(s64)handler;
+ new_sa.sa.sa_handler = (void __user *)(s64)handler;
err |= __get_user(new_sa.sa.sa_flags, &act->sa_flags);
err |= get_sigset(&new_sa.sa.sa_mask, &act->sa_mask);
if (err)
@@ -899,7 +901,7 @@
}
asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t *set,
- compat_sigset_t *oset, unsigned int sigsetsize)
+ compat_sigset_t __user *oset, unsigned int sigsetsize)
{
sigset_t old_set, new_set;
int ret;
@@ -909,8 +911,9 @@
return -EFAULT;
set_fs (KERNEL_DS);
- ret = sys_rt_sigprocmask(how, set ? &new_set : NULL,
- oset ? &old_set : NULL, sigsetsize);
+ ret = sys_rt_sigprocmask(how, set ? (sigset_t __user *)&new_set : NULL,
+ oset ? (sigset_t __user *)&old_set : NULL,
+ sigsetsize);
set_fs (old_fs);
if (!ret && oset && put_sigset(&old_set, oset))
@@ -919,7 +922,7 @@
return ret;
}
-asmlinkage int sys32_rt_sigpending(compat_sigset_t *uset,
+asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset,
unsigned int sigsetsize)
{
int ret;
@@ -927,7 +930,7 @@
mm_segment_t old_fs = get_fs();
set_fs (KERNEL_DS);
- ret = sys_rt_sigpending(&set, sigsetsize);
+ ret = sys_rt_sigpending((sigset_t __user *)&set, sigsetsize);
set_fs (old_fs);
if (!ret && put_sigset(&set, uset))
@@ -936,7 +939,7 @@
return ret;
}
-asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t *uinfo)
+asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo)
{
siginfo_t info;
int ret;
@@ -946,7 +949,7 @@
copy_from_user (info._sifields._pad, uinfo->_sifields._pad, SI_PAD_SIZE))
return -EFAULT;
set_fs (KERNEL_DS);
- ret = sys_rt_sigqueueinfo(pid, sig, &info);
+ ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *)&info);
set_fs (old_fs);
return ret;
}
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index ec61b26..384fc4a 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -48,6 +48,8 @@
#define __NR_N32_rt_sigreturn 6211
#define __NR_N32_restart_syscall 6214
+#define DEBUG_SIG 0
+
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
/* IRIX compatible stack_t */
@@ -83,12 +85,12 @@
__attribute_used__ noinline static void
_sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
{
- struct rt_sigframe_n32 *frame;
+ struct rt_sigframe_n32 __user *frame;
sigset_t set;
stack_t st;
s32 sp;
- frame = (struct rt_sigframe_n32 *) regs.regs[29];
+ frame = (struct rt_sigframe_n32 __user *) regs.regs[29];
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set)))
@@ -114,7 +116,7 @@
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
- do_sigaltstack(&st, NULL, regs.regs[29]);
+ do_sigaltstack((stack_t __user *)&st, NULL, regs.regs[29]);
/*
* Don't let your children do this ...
@@ -133,7 +135,7 @@
int setup_rt_frame_n32(struct k_sigaction * ka,
struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info)
{
- struct rt_sigframe_n32 *frame;
+ struct rt_sigframe_n32 __user *frame;
int err = 0;
s32 sp;
@@ -184,9 +186,9 @@
current->comm, current->pid,
frame, regs->cp0_epc, regs->regs[31]);
#endif
- return 1;
+ return 0;
give_sigsegv:
force_sigsegv(signr, current);
- return 0;
+ return -EFAULT;
}
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 3323584..1da2eeb 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -212,12 +212,12 @@
int error;
char * filename;
- filename = getname((char *) (long)regs.regs[4]);
+ filename = getname((char __user *) (long)regs.regs[4]);
error = PTR_ERR(filename);
if (IS_ERR(filename))
goto out;
- error = do_execve(filename, (char **) (long)regs.regs[5],
- (char **) (long)regs.regs[6], ®s);
+ error = do_execve(filename, (char __user *__user *) (long)regs.regs[5],
+ (char __user *__user *) (long)regs.regs[6], ®s);
putname(filename);
out:
@@ -227,7 +227,7 @@
/*
* Compacrapability ...
*/
-asmlinkage int sys_uname(struct old_utsname * name)
+asmlinkage int sys_uname(struct old_utsname __user * name)
{
if (name && !copy_to_user(name, &system_utsname, sizeof (*name)))
return 0;
@@ -237,7 +237,7 @@
/*
* Compacrapability ...
*/
-asmlinkage int sys_olduname(struct oldold_utsname * name)
+asmlinkage int sys_olduname(struct oldold_utsname __user * name)
{
int error;
@@ -274,7 +274,7 @@
asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
{
int tmp, len;
- char *name;
+ char __user *name;
switch(cmd) {
case SETNAME: {
@@ -283,7 +283,7 @@
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- name = (char *) arg1;
+ name = (char __user *) arg1;
len = strncpy_from_user(nodename, name, __NEW_UTS_LEN);
if (len < 0)
@@ -324,7 +324,7 @@
* This is really horribly ugly.
*/
asmlinkage int sys_ipc (uint call, int first, int second,
- unsigned long third, void *ptr, long fifth)
+ unsigned long third, void __user *ptr, long fifth)
{
int version, ret;
@@ -333,24 +333,25 @@
switch (call) {
case SEMOP:
- return sys_semtimedop (first, (struct sembuf *)ptr, second,
- NULL);
+ return sys_semtimedop (first, (struct sembuf __user *)ptr,
+ second, NULL);
case SEMTIMEDOP:
- return sys_semtimedop (first, (struct sembuf *)ptr, second,
- (const struct timespec __user *)fifth);
+ return sys_semtimedop (first, (struct sembuf __user *)ptr,
+ second,
+ (const struct timespec __user *)fifth);
case SEMGET:
return sys_semget (first, second, third);
case SEMCTL: {
union semun fourth;
if (!ptr)
return -EINVAL;
- if (get_user(fourth.__pad, (void **) ptr))
+ if (get_user(fourth.__pad, (void *__user *) ptr))
return -EFAULT;
return sys_semctl (first, second, third, fourth);
}
case MSGSND:
- return sys_msgsnd (first, (struct msgbuf *) ptr,
+ return sys_msgsnd (first, (struct msgbuf __user *) ptr,
second, third);
case MSGRCV:
switch (version) {
@@ -360,7 +361,7 @@
return -EINVAL;
if (copy_from_user(&tmp,
- (struct ipc_kludge *) ptr,
+ (struct ipc_kludge __user *) ptr,
sizeof (tmp)))
return -EFAULT;
return sys_msgrcv (first, tmp.msgp, second,
@@ -368,35 +369,38 @@
}
default:
return sys_msgrcv (first,
- (struct msgbuf *) ptr,
+ (struct msgbuf __user *) ptr,
second, fifth, third);
}
case MSGGET:
return sys_msgget ((key_t) first, second);
case MSGCTL:
- return sys_msgctl (first, second, (struct msqid_ds *) ptr);
+ return sys_msgctl (first, second,
+ (struct msqid_ds __user *) ptr);
case SHMAT:
switch (version) {
default: {
ulong raddr;
- ret = do_shmat (first, (char *) ptr, second, &raddr);
+ ret = do_shmat (first, (char __user *) ptr, second,
+ &raddr);
if (ret)
return ret;
- return put_user (raddr, (ulong *) third);
+ return put_user (raddr, (ulong __user *) third);
}
case 1: /* iBCS2 emulator entry point */
if (!segment_eq(get_fs(), get_ds()))
return -EINVAL;
- return do_shmat (first, (char *) ptr, second, (ulong *) third);
+ return do_shmat (first, (char __user *) ptr, second,
+ (ulong *) third);
}
case SHMDT:
- return sys_shmdt ((char *)ptr);
+ return sys_shmdt ((char __user *)ptr);
case SHMGET:
return sys_shmget (first, second, third);
case SHMCTL:
return sys_shmctl (first, second,
- (struct shmid_ds *) ptr);
+ (struct shmid_ds __user *) ptr);
default:
return -ENOSYS;
}
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 59a1879..c9d2b51 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1168,7 +1168,7 @@
#endif
if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
status_set |= ST0_XX;
- change_c0_status(ST0_CU|ST0_MX|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
+ change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
status_set);
if (cpu_has_dsp)
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 25cc856..ff699db 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -1,4 +1,5 @@
#include <linux/config.h>
+#include <asm/asm-offsets.h>
#include <asm-generic/vmlinux.lds.h>
#undef mips /* CPP really sucks for this job */
@@ -64,10 +65,10 @@
we can shorten the on-disk segment size. */
.sdata : { *(.sdata) }
- . = ALIGN(4096);
+ . = ALIGN(_PAGE_SIZE);
__nosave_begin = .;
.data_nosave : { *(.data.nosave) }
- . = ALIGN(4096);
+ . = ALIGN(_PAGE_SIZE);
__nosave_end = .;
. = ALIGN(32);
@@ -76,7 +77,7 @@
_edata = .; /* End of data section */
/* will be freed after init */
- . = ALIGN(4096); /* Init code and data */
+ . = ALIGN(_PAGE_SIZE); /* Init code and data */
__init_begin = .;
.init.text : {
_sinittext = .;
@@ -105,7 +106,7 @@
.con_initcall.init : { *(.con_initcall.init) }
__con_initcall_end = .;
SECURITY_INIT
- . = ALIGN(4096);
+ . = ALIGN(_PAGE_SIZE);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
__initramfs_end = .;
@@ -113,7 +114,7 @@
__per_cpu_start = .;
.data.percpu : { *(.data.percpu) }
__per_cpu_end = .;
- . = ALIGN(4096);
+ . = ALIGN(_PAGE_SIZE);
__init_end = .;
/* freed after init ends here */
diff --git a/arch/mips/lasat/reset.c b/arch/mips/lasat/reset.c
index 8d7d7a4..181bf68 100644
--- a/arch/mips/lasat/reset.c
+++ b/arch/mips/lasat/reset.c
@@ -19,9 +19,12 @@
*/
#include <linux/config.h>
#include <linux/kernel.h>
+#include <linux/pm.h>
+
#include <asm/reboot.h>
#include <asm/system.h>
#include <asm/lasat/lasat.h>
+
#include "picvue.h"
#include "prom.h"
@@ -63,5 +66,5 @@
{
_machine_restart = lasat_machine_restart;
_machine_halt = lasat_machine_halt;
- _machine_power_off = lasat_machine_halt;
+ pm_power_off = lasat_machine_halt;
}
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
index dcd819d..83eb08b 100644
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -134,8 +134,8 @@
memset(&s, 0, sizeof(s));
- s.flags = STD_COM_FLAGS;
- s.iotype = SERIAL_IO_MEM;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ s.iotype = UPIO_MEM;
if (mips_machtype == MACH_LASAT_100) {
s.uartclk = LASAT_BASE_BAUD_100 * 16;
diff --git a/arch/mips/lib-32/dump_tlb.c b/arch/mips/lib-32/dump_tlb.c
index 46519f4..c49a925 100644
--- a/arch/mips/lib-32/dump_tlb.c
+++ b/arch/mips/lib-32/dump_tlb.c
@@ -158,29 +158,26 @@
printk("task->mm == %8p\n", t->mm);
//printk("tasks->mm.pgd == %08x\n", (unsigned int) t->mm->pgd);
- if (addr > KSEG0)
+ if (addr > KSEG0) {
page_dir = pgd_offset_k(0);
- else if (t->mm) {
- page_dir = pgd_offset(t->mm, 0);
- printk("page_dir == %08x\n", (unsigned int) page_dir);
- } else
- printk("Current thread has no mm\n");
-
- if (addr > KSEG0)
pgd = pgd_offset_k(addr);
- else if (t->mm) {
+ } else if (t->mm) {
+ page_dir = pgd_offset(t->mm, 0);
pgd = pgd_offset(t->mm, addr);
- printk("pgd == %08x, ", (unsigned int) pgd);
- pud = pud_offset(pgd, addr);
- printk("pud == %08x, ", (unsigned int) pud);
-
- pmd = pmd_offset(pud, addr);
- printk("pmd == %08x, ", (unsigned int) pmd);
-
- pte = pte_offset(pmd, addr);
- printk("pte == %08x, ", (unsigned int) pte);
- } else
+ } else {
printk("Current thread has no mm\n");
+ return;
+ }
+ printk("page_dir == %08x\n", (unsigned int) page_dir);
+ printk("pgd == %08x, ", (unsigned int) pgd);
+ pud = pud_offset(pgd, addr);
+ printk("pud == %08x, ", (unsigned int) pud);
+
+ pmd = pmd_offset(pud, addr);
+ printk("pmd == %08x, ", (unsigned int) pmd);
+
+ pte = pte_offset(pmd, addr);
+ printk("pte == %08x, ", (unsigned int) pte);
page = *pte;
#ifdef CONFIG_64BIT_PHYS_ADDR
diff --git a/arch/mips/math-emu/dp_simple.c b/arch/mips/math-emu/dp_simple.c
index 495c1ac..1c555e6 100644
--- a/arch/mips/math-emu/dp_simple.c
+++ b/arch/mips/math-emu/dp_simple.c
@@ -48,16 +48,22 @@
CLEARCX;
FLUSHXDP;
+ /*
+ * Invert the sign ALWAYS to prevent an endless recursion on
+ * pow() in libc.
+ */
+ /* quick fix up */
+ DPSIGN(x) ^= 1;
+
if (xc == IEEE754_CLASS_SNAN) {
+ ieee754dp y = ieee754dp_indef();
SETCX(IEEE754_INVALID_OPERATION);
- return ieee754dp_nanxcpt(ieee754dp_indef(), "neg");
+ DPSIGN(y) = DPSIGN(x);
+ return ieee754dp_nanxcpt(y, "neg");
}
if (ieee754dp_isnan(x)) /* but not infinity */
return ieee754dp_nanxcpt(x, "neg", x);
-
- /* quick fix up */
- DPSIGN(x) ^= 1;
return x;
}
diff --git a/arch/mips/math-emu/sp_simple.c b/arch/mips/math-emu/sp_simple.c
index c809830..770f0f4 100644
--- a/arch/mips/math-emu/sp_simple.c
+++ b/arch/mips/math-emu/sp_simple.c
@@ -48,16 +48,22 @@
CLEARCX;
FLUSHXSP;
+ /*
+ * Invert the sign ALWAYS to prevent an endless recursion on
+ * pow() in libc.
+ */
+ /* quick fix up */
+ SPSIGN(x) ^= 1;
+
if (xc == IEEE754_CLASS_SNAN) {
+ ieee754sp y = ieee754sp_indef();
SETCX(IEEE754_INVALID_OPERATION);
- return ieee754sp_nanxcpt(ieee754sp_indef(), "neg");
+ SPSIGN(y) = SPSIGN(x);
+ return ieee754sp_nanxcpt(y, "neg");
}
if (ieee754sp_isnan(x)) /* but not infinity */
return ieee754sp_nanxcpt(x, "neg", x);
-
- /* quick fix up */
- SPSIGN(x) ^= 1;
return x;
}
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
index 625843b..873cf31 100644
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ b/arch/mips/mips-boards/atlas/atlas_setup.c
@@ -82,8 +82,8 @@
#endif
s.irq = ATLASINT_UART;
s.uartclk = ATLAS_BASE_BAUD * 16;
- s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
- s.iotype = SERIAL_IO_PORT;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
+ s.iotype = UPIO_PORT;
s.regshift = 3;
if (early_serial_setup(&s) != 0) {
diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c
index 9fdec74..7213c39 100644
--- a/arch/mips/mips-boards/generic/reset.c
+++ b/arch/mips/mips-boards/generic/reset.c
@@ -23,6 +23,7 @@
*
*/
#include <linux/config.h>
+#include <linux/pm.h>
#include <asm/io.h>
#include <asm/reboot.h>
@@ -65,9 +66,9 @@
_machine_restart = mips_machine_restart;
_machine_halt = mips_machine_halt;
#if defined(CONFIG_MIPS_ATLAS)
- _machine_power_off = atlas_machine_power_off;
+ pm_power_off = atlas_machine_power_off;
#endif
#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD)
- _machine_power_off = mips_machine_halt;
+ pm_power_off = mips_machine_halt;
#endif
}
diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
index f966bc1..4266ce4 100644
--- a/arch/mips/mips-boards/sead/sead_setup.c
+++ b/arch/mips/mips-boards/sead/sead_setup.c
@@ -71,8 +71,8 @@
#endif
s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0;
s.uartclk = SEAD_BASE_BAUD * 16;
- s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
- s.iotype = 0;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
+ s.iotype = UPIO_PORT;
s.regshift = 3;
if (early_serial_setup(&s) != 0) {
diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c
index 485d5a5..a2fd629 100644
--- a/arch/mips/mips-boards/sim/sim_setup.c
+++ b/arch/mips/mips-boards/sim/sim_setup.c
@@ -88,8 +88,8 @@
but poll for now */
s.irq = 0;
s.uartclk = BASE_BAUD * 16;
- s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST;
- s.iotype = SERIAL_IO_PORT | ASYNC_SKIP_TEST;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ s.iotype = UPIO_PORT;
s.regshift = 0;
s.timeout = 4;
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 422b55f..e51c38c 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -464,8 +464,8 @@
}
struct flush_icache_range_args {
- unsigned long __user start;
- unsigned long __user end;
+ unsigned long start;
+ unsigned long end;
};
static inline void local_r4k_flush_icache_range(void *args)
@@ -528,8 +528,7 @@
}
}
-static void r4k_flush_icache_range(unsigned long __user start,
- unsigned long __user end)
+static void r4k_flush_icache_range(unsigned long start, unsigned long end)
{
struct flush_icache_range_args args;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 314701a..591c22b 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -25,8 +25,7 @@
unsigned long end);
void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
unsigned long pfn);
-void (*flush_icache_range)(unsigned long __user start,
- unsigned long __user end);
+void (*flush_icache_range)(unsigned long start, unsigned long end);
void (*flush_icache_page)(struct vm_area_struct *vma, struct page *page);
/* MIPS specific cache operations */
@@ -53,7 +52,7 @@
* We could optimize the case where the cache argument is not BCACHE but
* that seems very atypical use ...
*/
-asmlinkage int sys_cacheflush(unsigned long __user addr,
+asmlinkage int sys_cacheflush(unsigned long addr,
unsigned long bytes, unsigned int cache)
{
if (bytes == 0)
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 4ee91c9..0ff9a34 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -24,6 +24,7 @@
#include <linux/bootmem.h>
#include <linux/highmem.h>
#include <linux/swap.h>
+#include <linux/proc_fs.h>
#include <asm/bootinfo.h>
#include <asm/cachectl.h>
@@ -200,6 +201,11 @@
return 0;
}
+static struct kcore_list kcore_mem, kcore_vmalloc;
+#ifdef CONFIG_64BIT
+static struct kcore_list kcore_kseg0;
+#endif
+
void __init mem_init(void)
{
unsigned long codesize, reservedpages, datasize, initsize;
@@ -249,6 +255,16 @@
datasize = (unsigned long) &_edata - (unsigned long) &_etext;
initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+#ifdef CONFIG_64BIT
+ if ((unsigned long) &_text > (unsigned long) CKSEG0)
+ /* The -4 is a hack so that user tools don't have to handle
+ the overflow. */
+ kclist_add(&kcore_kseg0, (void *) CKSEG0, 0x80000000 - 4);
+#endif
+ kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT);
+ kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
+ VMALLOC_END-VMALLOC_START);
+
printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, "
"%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n",
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
diff --git a/arch/mips/momentum/jaguar_atx/ja-console.c b/arch/mips/momentum/jaguar_atx/ja-console.c
index da6e1ed..2292d0e 100644
--- a/arch/mips/momentum/jaguar_atx/ja-console.c
+++ b/arch/mips/momentum/jaguar_atx/ja-console.c
@@ -93,7 +93,7 @@
up.uartclk = JAGUAR_ATX_UART_CLK;
up.regshift = 2;
up.iotype = UPIO_MEM;
- up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
up.line = 0;
if (early_serial_setup(&up))
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
index bab192d..301d672 100644
--- a/arch/mips/momentum/jaguar_atx/setup.c
+++ b/arch/mips/momentum/jaguar_atx/setup.c
@@ -50,6 +50,7 @@
#include <linux/pci.h>
#include <linux/swap.h>
#include <linux/ioport.h>
+#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
@@ -365,7 +366,7 @@
_machine_restart = momenco_jaguar_restart;
_machine_halt = momenco_jaguar_halt;
- _machine_power_off = momenco_jaguar_power_off;
+ pm_power_off = momenco_jaguar_power_off;
/*
* initrd_start = (ulong)jaguar_initrd_start;
diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c
index c9b7ff8..f95677f 100644
--- a/arch/mips/momentum/ocelot_3/setup.c
+++ b/arch/mips/momentum/ocelot_3/setup.c
@@ -57,6 +57,8 @@
#include <linux/timex.h>
#include <linux/bootmem.h>
#include <linux/mv643xx.h>
+#include <linux/pm.h>
+
#include <asm/time.h>
#include <asm/page.h>
#include <asm/bootinfo.h>
@@ -321,7 +323,7 @@
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
- _machine_power_off = momenco_ocelot_power_off;
+ pm_power_off = momenco_ocelot_power_off;
/* Wired TLB entries */
setup_wired_tlb_entries();
diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c
index 2755c15..15998d8 100644
--- a/arch/mips/momentum/ocelot_c/setup.c
+++ b/arch/mips/momentum/ocelot_c/setup.c
@@ -51,8 +51,10 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
+#include <linux/pm.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
+
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
@@ -236,7 +238,7 @@
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
- _machine_power_off = momenco_ocelot_power_off;
+ pm_power_off = momenco_ocelot_power_off;
/*
* initrd_start = (ulong)ocelot_initrd_start;
diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c
index 6336751..fed4e8e 100644
--- a/arch/mips/momentum/ocelot_g/setup.c
+++ b/arch/mips/momentum/ocelot_g/setup.c
@@ -47,8 +47,10 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
+#include <linux/pm.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
+
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
@@ -169,7 +171,7 @@
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
- _machine_power_off = momenco_ocelot_power_off;
+ pm_power_off = momenco_ocelot_power_off;
/*
* initrd_start = (ulong)ocelot_initrd_start;
diff --git a/arch/mips/oprofile/Makefile b/arch/mips/oprofile/Makefile
index 354261d..0a50aad 100644
--- a/arch/mips/oprofile/Makefile
+++ b/arch/mips/oprofile/Makefile
@@ -12,4 +12,5 @@
oprofile-$(CONFIG_CPU_MIPS32) += op_model_mipsxx.o
oprofile-$(CONFIG_CPU_MIPS64) += op_model_mipsxx.o
+oprofile-$(CONFIG_CPU_SB1) += op_model_mipsxx.o
oprofile-$(CONFIG_CPU_RM9000) += op_model_rm9000.o
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index 53f9889..935dd85 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -79,6 +79,9 @@
case CPU_20KC:
case CPU_24K:
case CPU_25KF:
+ case CPU_34K:
+ case CPU_SB1:
+ case CPU_SB1A:
lmodel = &op_model_mipsxx;
break;
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 1d1eee4..95d488c 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -201,10 +201,21 @@
op_model_mipsxx.cpu_type = "mips/25K";
break;
+#ifndef CONFIG_SMP
+ case CPU_34K:
+ op_model_mipsxx.cpu_type = "mips/34K";
+ break;
+#endif
+
case CPU_5KC:
op_model_mipsxx.cpu_type = "mips/5K";
break;
+ case CPU_SB1:
+ case CPU_SB1A:
+ op_model_mipsxx.cpu_type = "mips/sb1";
+ break;
+
default:
printk(KERN_ERR "Profiling unsupported for this CPU\n");
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 741e67c..16205b5 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -46,6 +46,7 @@
obj-$(CONFIG_SGI_IP27) += pci-ip27.o
obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
+obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o
obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
obj-$(CONFIG_SNI_RM200_PCI) += fixup-sni.o ops-sni.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 909292f..75a01e7 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -17,7 +17,7 @@
#include <asm/io.h>
#include <asm/gt64120.h>
-#include <asm/cobalt/cobalt.h>
+#include <asm/mach-cobalt/cobalt.h>
extern int cobalt_board_id;
@@ -52,7 +52,7 @@
pci_read_config_byte(dev, PCI_LATENCY_TIMER, <);
if (lt < 64)
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 7);
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
@@ -69,7 +69,7 @@
* host bridge.
*/
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 7);
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
/*
* The code described by the comment below has been removed
diff --git a/arch/mips/pci/ops-gt64111.c b/arch/mips/pci/ops-gt64111.c
index c180793..13de459 100644
--- a/arch/mips/pci/ops-gt64111.c
+++ b/arch/mips/pci/ops-gt64111.c
@@ -15,7 +15,7 @@
#include <asm/io.h>
#include <asm/gt64120.h>
-#include <asm/cobalt/cobalt.h>
+#include <asm/mach-cobalt/cobalt.h>
/*
* Device 31 on the GT64111 is used to generate PCI special
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index f194b4e..ca975e7 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -234,11 +234,9 @@
/* turn on ExpMemEn */
cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
- printk("PCIFeatureCtrl = %x\n", cmdreg);
WRITECFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40),
cmdreg | 0x10);
cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
- printk("PCIFeatureCtrl = %x\n", cmdreg);
/*
* Establish mappings in KSEG2 (kernel virtual) to PCI I/O
diff --git a/arch/mips/philips/pnx8550/common/platform.c b/arch/mips/philips/pnx8550/common/platform.c
index 8aa9bd6..a592260f 100644
--- a/arch/mips/philips/pnx8550/common/platform.c
+++ b/arch/mips/philips/pnx8550/common/platform.c
@@ -66,28 +66,28 @@
[0] = {
.port = {
.type = PORT_IP3106,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.membase = (void __iomem *)PNX8550_UART_PORT0,
.mapbase = PNX8550_UART_PORT0,
.irq = PNX8550_UART_INT(0),
.uartclk = 3692300,
.fifosize = 16,
.ops = &ip3106_pops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
},
[1] = {
.port = {
.type = PORT_IP3106,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.membase = (void __iomem *)PNX8550_UART_PORT1,
.mapbase = PNX8550_UART_PORT1,
.irq = PNX8550_UART_INT(1),
.uartclk = 3692300,
.fifosize = 16,
.ops = &ip3106_pops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
},
diff --git a/arch/mips/philips/pnx8550/common/setup.c b/arch/mips/philips/pnx8550/common/setup.c
index ee6bf72..0d8a776 100644
--- a/arch/mips/philips/pnx8550/common/setup.c
+++ b/arch/mips/philips/pnx8550/common/setup.c
@@ -25,6 +25,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/serial_ip3106.h>
+#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
@@ -90,7 +91,7 @@
_machine_restart = pnx8550_machine_restart;
_machine_halt = pnx8550_machine_halt;
- _machine_power_off = pnx8550_machine_power_off;
+ pm_power_off = pnx8550_machine_power_off;
board_time_init = pnx8550_time_init;
board_timer_setup = pnx8550_timer_setup;
diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c
index 555bfacf..165275c 100644
--- a/arch/mips/pmc-sierra/yosemite/prom.c
+++ b/arch/mips/pmc-sierra/yosemite/prom.c
@@ -13,6 +13,7 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/delay.h>
+#include <linux/pm.h>
#include <linux/smp.h>
#include <asm/io.h>
@@ -92,7 +93,7 @@
/* Callbacks for halt, restart */
_machine_restart = (void (*)(char *)) prom_exit;
_machine_halt = prom_halt;
- _machine_power_off = prom_halt;
+ pm_power_off = prom_halt;
debug_vectors = cv;
arcs_cmdline[0] = '\0';
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
index 059755b..8bce711 100644
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -185,7 +185,7 @@
up.uartclk = TITAN_UART_CLK;
up.regshift = 0;
up.iotype = UPIO_MEM;
- up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
up.line = 0;
if (early_serial_setup(&up))
diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index 214ffd2..92a3b3c 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -3,8 +3,9 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1997, 1998, 2001, 2003 by Ralf Baechle
+ * Copyright (C) 1997, 1998, 2001, 03, 05, 06 by Ralf Baechle
*/
+#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/ds1286.h>
#include <linux/module.h>
@@ -12,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/notifier.h>
+#include <linux/pm.h>
#include <linux/timer.h>
#include <asm/io.h>
@@ -41,28 +43,10 @@
#define MACHINE_PANICED 1
#define MACHINE_SHUTTING_DOWN 2
-static int machine_state = 0;
-static void sgi_machine_restart(char *command) __attribute__((noreturn));
-static void sgi_machine_halt(void) __attribute__((noreturn));
-static void sgi_machine_power_off(void) __attribute__((noreturn));
+static int machine_state;
-static void sgi_machine_restart(char *command)
-{
- if (machine_state & MACHINE_SHUTTING_DOWN)
- sgi_machine_power_off();
- sgimc->cpuctrl0 |= SGIMC_CCTRL0_SYSINIT;
- while (1);
-}
-
-static void sgi_machine_halt(void)
-{
- if (machine_state & MACHINE_SHUTTING_DOWN)
- sgi_machine_power_off();
- ArcEnterInteractiveMode();
-}
-
-static void sgi_machine_power_off(void)
+static void ATTRIB_NORET sgi_machine_power_off(void)
{
unsigned int tmp;
@@ -84,6 +68,21 @@
}
}
+static void ATTRIB_NORET sgi_machine_restart(char *command)
+{
+ if (machine_state & MACHINE_SHUTTING_DOWN)
+ sgi_machine_power_off();
+ sgimc->cpuctrl0 |= SGIMC_CCTRL0_SYSINIT;
+ while (1);
+}
+
+static void ATTRIB_NORET sgi_machine_halt(void)
+{
+ if (machine_state & MACHINE_SHUTTING_DOWN)
+ sgi_machine_power_off();
+ ArcEnterInteractiveMode();
+}
+
static void power_timeout(unsigned long data)
{
sgi_machine_power_off();
@@ -95,7 +94,7 @@
sgi_ioc_reset ^= (SGIOC_RESET_LC0OFF|SGIOC_RESET_LC1OFF);
sgioc->reset = sgi_ioc_reset;
- mod_timer(&blink_timer, jiffies+data);
+ mod_timer(&blink_timer, jiffies + data);
}
static void debounce(unsigned long data)
@@ -103,7 +102,7 @@
del_timer(&debounce_timer);
if (sgint->istat1 & SGINT_ISTAT1_PWR) {
/* Interrupt still being sent. */
- debounce_timer.expires = jiffies + 5; /* 0.05s */
+ debounce_timer.expires = jiffies + (HZ / 20); /* 0.05s */
add_timer(&debounce_timer);
sgioc->panel = SGIOC_PANEL_POWERON | SGIOC_PANEL_POWERINTR |
@@ -151,7 +150,7 @@
indy_volume_button(1);
if (sgint->istat1 & SGINT_ISTAT1_PWR) {
- volume_timer.expires = jiffies + 1;
+ volume_timer.expires = jiffies + (HZ / 100);
add_timer(&volume_timer);
}
}
@@ -164,7 +163,7 @@
indy_volume_button(-1);
if (sgint->istat1 & SGINT_ISTAT1_PWR) {
- volume_timer.expires = jiffies + 1;
+ volume_timer.expires = jiffies + (HZ / 100);
add_timer(&volume_timer);
}
}
@@ -199,14 +198,14 @@
if (!(buttons & SGIOC_PANEL_VOLUPINTR)) {
init_timer(&volume_timer);
volume_timer.function = volume_up_button;
- volume_timer.expires = jiffies + 1;
+ volume_timer.expires = jiffies + (HZ / 100);
add_timer(&volume_timer);
}
/* Volume down button was pressed */
if (!(buttons & SGIOC_PANEL_VOLDNINTR)) {
init_timer(&volume_timer);
volume_timer.function = volume_down_button;
- volume_timer.expires = jiffies + 1;
+ volume_timer.expires = jiffies + (HZ / 100);
add_timer(&volume_timer);
}
@@ -234,7 +233,7 @@
{
_machine_restart = sgi_machine_restart;
_machine_halt = sgi_machine_halt;
- _machine_power_off = sgi_machine_power_off;
+ pm_power_off = sgi_machine_power_off;
request_irq(SGI_PANEL_IRQ, panel_int, 0, "Front Panel", NULL);
init_timer(&blink_timer);
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 5e59b4c..7018e18 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -56,6 +56,7 @@
void __init plat_setup(void)
{
char *ctype;
+ char *cserial;
board_be_init = ip22_be_init;
ip22_time_init();
@@ -81,9 +82,14 @@
/* ARCS console environment variable is set to "g?" for
* graphics console, it is set to "d" for the first serial
* line and "d2" for the second serial line.
+ *
+ * Need to check if the case is 'g' but no keyboard:
+ * (ConsoleIn/Out = serial)
*/
ctype = ArcGetEnvironmentVariable("console");
- if (ctype && *ctype == 'd') {
+ cserial = ArcGetEnvironmentVariable("ConsoleOut");
+
+ if ((ctype && *ctype == 'd') || (cserial && *cserial == 's')) {
static char options[8];
char *baud = ArcGetEnvironmentVariable("dbaud");
if (baud)
@@ -91,7 +97,7 @@
add_preferred_console("ttyS", *(ctype + 1) == '2' ? 1 : 0,
baud ? options : NULL);
} else if (!ctype || *ctype != 'g') {
- /* Use ARC if we don't want serial ('d') or Newport ('g'). */
+ /* Use ARC if we don't want serial ('d') or graphics ('g'). */
prom_flags |= PROM_FLAG_USE_AS_CONSOLE;
add_preferred_console("arc", 0, NULL);
}
diff --git a/arch/mips/sgi-ip27/ip27-reset.c b/arch/mips/sgi-ip27/ip27-reset.c
index 2e16be9..4322db5 100644
--- a/arch/mips/sgi-ip27/ip27-reset.c
+++ b/arch/mips/sgi-ip27/ip27-reset.c
@@ -5,7 +5,7 @@
*
* Reset an IP27.
*
- * Copyright (C) 1997, 1998, 1999, 2000 by Ralf Baechle
+ * Copyright (C) 1997, 1998, 1999, 2000, 06 by Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#include <linux/config.h>
@@ -15,6 +15,7 @@
#include <linux/smp.h>
#include <linux/mmzone.h>
#include <linux/nodemask.h>
+#include <linux/pm.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -77,5 +78,5 @@
{
_machine_restart = ip27_machine_restart;
_machine_halt = ip27_machine_halt;
- _machine_power_off = ip27_machine_power_off;
+ pm_power_off = ip27_machine_power_off;
}
diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c
index 88e1f52..0c94800 100644
--- a/arch/mips/sgi-ip32/ip32-reset.c
+++ b/arch/mips/sgi-ip32/ip32-reset.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/ds17287rtc.h>
#include <linux/interrupt.h>
+#include <linux/pm.h>
#include <asm/addrspace.h>
#include <asm/irq.h>
@@ -188,7 +189,7 @@
_machine_restart = ip32_machine_restart;
_machine_halt = ip32_machine_halt;
- _machine_power_off = ip32_machine_power_off;
+ pm_power_off = ip32_machine_power_off;
init_timer(&blink_timer);
blink_timer.function = blink_timeout;
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
index d10a269..2c38770 100644
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -66,11 +66,6 @@
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
-extern int early_serial_setup(struct uart_port *port);
-
-#define STD_COM_FLAGS (ASYNC_SKIP_TEST)
-#define BASE_BAUD (1843200 / 16)
-
#endif /* CONFIG_SERIAL_8250 */
/* An arbitrary time; this can be decreased if reliability looks good */
@@ -110,8 +105,8 @@
o2_serial[0].type = PORT_16550A;
o2_serial[0].line = 0;
o2_serial[0].irq = MACEISA_SERIAL1_IRQ;
- o2_serial[0].flags = STD_COM_FLAGS;
- o2_serial[0].uartclk = BASE_BAUD * 16;
+ o2_serial[0].flags = UPF_SKIP_TEST;
+ o2_serial[0].uartclk = 1843200;
o2_serial[0].iotype = UPIO_MEM;
o2_serial[0].membase = (char *)&mace->isa.serial1;
o2_serial[0].fifosize = 14;
@@ -121,8 +116,8 @@
o2_serial[1].type = PORT_16550A;
o2_serial[1].line = 1;
o2_serial[1].irq = MACEISA_SERIAL2_IRQ;
- o2_serial[1].flags = STD_COM_FLAGS;
- o2_serial[1].uartclk = BASE_BAUD * 16;
+ o2_serial[1].flags = UPF_SKIP_TEST;
+ o2_serial[1].uartclk = 1843200;
o2_serial[1].iotype = UPIO_MEM;
o2_serial[1].membase = (char *)&mace->isa.serial2;
o2_serial[1].fifosize = 14;
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
index 7a2c7a8..ea30802 100644
--- a/arch/mips/sibyte/cfe/setup.c
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -23,6 +23,7 @@
#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/bootmem.h>
+#include <linux/pm.h>
#include <linux/smp.h>
#include <asm/bootinfo.h>
@@ -248,7 +249,7 @@
_machine_restart = cfe_linux_restart;
_machine_halt = cfe_linux_halt;
- _machine_power_off = cfe_linux_halt;
+ pm_power_off = cfe_linux_halt;
/*
* Check if a loader was used; if NOT, the 4 arguments are
diff --git a/arch/mips/sibyte/sb1250/prom.c b/arch/mips/sibyte/sb1250/prom.c
index de62ab0..742043f 100644
--- a/arch/mips/sibyte/sb1250/prom.c
+++ b/arch/mips/sibyte/sb1250/prom.c
@@ -24,6 +24,7 @@
#include <linux/bootmem.h>
#include <linux/smp.h>
#include <linux/initrd.h>
+#include <linux/pm.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
@@ -79,7 +80,7 @@
{
_machine_restart = (void (*)(char *))prom_linux_exit;
_machine_halt = prom_linux_exit;
- _machine_power_off = prom_linux_exit;
+ pm_power_off = prom_linux_exit;
strcpy(arcs_cmdline, "root=/dev/ram0 ");
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index df2e266..fde4751 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -16,6 +16,7 @@
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/config.h>
+#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/string.h>
@@ -42,7 +43,7 @@
/* Setup code likely to be common to all SiByte platforms */
-static inline int sys_rev_decode(void)
+static int __init sys_rev_decode(void)
{
int ret = 0;
@@ -74,7 +75,7 @@
return ret;
}
-static inline int setup_bcm1250(void)
+static int __init setup_bcm1250(void)
{
int ret = 0;
@@ -120,7 +121,7 @@
return ret;
}
-static inline int setup_bcm112x(void)
+static int __init setup_bcm112x(void)
{
int ret = 0;
@@ -146,7 +147,7 @@
return ret;
}
-void sb1250_setup(void)
+void __init sb1250_setup(void)
{
uint64_t sys_rev;
int plldiv;
@@ -169,31 +170,42 @@
soc_str, pass_str, zbbus_mhz * 2, sb1_pass);
prom_printf("Board type: %s\n", get_system_type());
- switch(war_pass) {
+ switch (war_pass) {
case K_SYS_REVISION_BCM1250_PASS1:
#ifndef CONFIG_SB1_PASS_1_WORKAROUNDS
- prom_printf("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, and the kernel doesn't have the proper workarounds compiled in. @@@@\n");
+ prom_printf("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, "
+ "and the kernel doesn't have the proper "
+ "workarounds compiled in. @@@@\n");
bad_config = 1;
#endif
break;
case K_SYS_REVISION_BCM1250_PASS2:
/* Pass 2 - easiest as default for now - so many numbers */
-#if !defined(CONFIG_SB1_PASS_2_WORKAROUNDS) || !defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS)
- prom_printf("@@@@ This is a BCM1250 A3-A10 board, and the kernel doesn't have the proper workarounds compiled in. @@@@\n");
+#if !defined(CONFIG_SB1_PASS_2_WORKAROUNDS) || \
+ !defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS)
+ prom_printf("@@@@ This is a BCM1250 A3-A10 board, and the "
+ "kernel doesn't have the proper workarounds "
+ "compiled in. @@@@\n");
bad_config = 1;
#endif
#ifdef CONFIG_CPU_HAS_PREFETCH
- prom_printf("@@@@ Prefetches may be enabled in this kernel, but are buggy on this board. @@@@\n");
+ prom_printf("@@@@ Prefetches may be enabled in this kernel, "
+ "but are buggy on this board. @@@@\n");
bad_config = 1;
#endif
break;
case K_SYS_REVISION_BCM1250_PASS2_2:
#ifndef CONFIG_SB1_PASS_2_WORKAROUNDS
- prom_printf("@@@@ This is a BCM1250 B1/B2. board, and the kernel doesn't have the proper workarounds compiled in. @@@@\n");
+ prom_printf("@@@@ This is a BCM1250 B1/B2. board, and the "
+ "kernel doesn't have the proper workarounds "
+ "compiled in. @@@@\n");
bad_config = 1;
#endif
-#if defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) || !defined(CONFIG_CPU_HAS_PREFETCH)
- prom_printf("@@@@ This is a BCM1250 B1/B2, but the kernel is conservatively configured for an 'A' stepping. @@@@\n");
+#if defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) || \
+ !defined(CONFIG_CPU_HAS_PREFETCH)
+ prom_printf("@@@@ This is a BCM1250 B1/B2, but the kernel is "
+ "conservatively configured for an 'A' stepping. "
+ "@@@@\n");
#endif
break;
default:
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index 262c856..1141fcd 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1996, 97, 98, 2000, 03, 04 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org)
*/
#include <linux/config.h>
#include <linux/eisa.h>
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/mc146818rtc.h>
+#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/console.h>
#include <linux/fb.h>
@@ -189,7 +190,7 @@
_machine_restart = sni_machine_restart;
_machine_halt = sni_machine_halt;
- _machine_power_off = sni_machine_power_off;
+ pm_power_off = sni_machine_power_off;
sni_display_setup();
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c
index e4d095d..e19e2be 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c
@@ -60,7 +60,6 @@
void __init prom_init(void)
{
- const char* toshiba_name_list[] = GROUP_TOSHIBA_NAMES;
extern int tx4927_get_mem_size(void);
extern char* toshiba_name;
int msize;
@@ -69,12 +68,13 @@
mips_machgroup = MACH_GROUP_TOSHIBA;
- if ((read_c0_prid() & 0xff) == PRID_REV_TX4927)
+ if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) {
mips_machtype = MACH_TOSHIBA_RBTX4927;
- else
+ toshiba_name = "TX4927";
+ } else {
mips_machtype = MACH_TOSHIBA_RBTX4937;
-
- toshiba_name = toshiba_name_list[mips_machtype];
+ toshiba_name = "TX4937";
+ }
msize = tx4927_get_mem_size();
add_memory_region(0, msize << 20, BOOT_MEM_RAM);
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
index 990fcb2..2ad6401 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -53,6 +53,8 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/timex.h>
+#include <linux/pm.h>
+
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/io.h>
@@ -537,19 +539,10 @@
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
"0x%08lx=mips_io_port_base",
mips_io_port_base);
-
- TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
- "setup pci_io_resource to 0x%08lx 0x%08lx\n",
- pci_io_resource.start,
- pci_io_resource.end);
- TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
- "setup pci_mem_resource to 0x%08lx 0x%08lx\n",
- pci_mem_resource.start,
- pci_mem_resource.end);
-
if (!called) {
printk
- ("TX4927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
+ ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
+ toshiba_name,
(unsigned short) (tx4927_pcicptr->pciid >> 16),
(unsigned short) (tx4927_pcicptr->pciid & 0xffff),
(unsigned short) (tx4927_pcicptr->pciccrev & 0xff),
@@ -562,21 +555,52 @@
(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : "");
if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) {
int pciclk = 0;
- switch ((unsigned long) tx4927_ccfgptr->
- ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
- case TX4927_CCFG_PCIDIVMODE_2_5:
- pciclk = tx4927_cpu_clock * 2 / 5;
- break;
- case TX4927_CCFG_PCIDIVMODE_3:
- pciclk = tx4927_cpu_clock / 3;
- break;
- case TX4927_CCFG_PCIDIVMODE_5:
- pciclk = tx4927_cpu_clock / 5;
- break;
- case TX4927_CCFG_PCIDIVMODE_6:
- pciclk = tx4927_cpu_clock / 6;
- break;
- }
+ if (mips_machtype == MACH_TOSHIBA_RBTX4937)
+ switch ((unsigned long) tx4927_ccfgptr->
+ ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
+ case TX4937_CCFG_PCIDIVMODE_4:
+ pciclk = tx4927_cpu_clock / 4;
+ break;
+ case TX4937_CCFG_PCIDIVMODE_4_5:
+ pciclk = tx4927_cpu_clock * 2 / 9;
+ break;
+ case TX4937_CCFG_PCIDIVMODE_5:
+ pciclk = tx4927_cpu_clock / 5;
+ break;
+ case TX4937_CCFG_PCIDIVMODE_5_5:
+ pciclk = tx4927_cpu_clock * 2 / 11;
+ break;
+ case TX4937_CCFG_PCIDIVMODE_8:
+ pciclk = tx4927_cpu_clock / 8;
+ break;
+ case TX4937_CCFG_PCIDIVMODE_9:
+ pciclk = tx4927_cpu_clock / 9;
+ break;
+ case TX4937_CCFG_PCIDIVMODE_10:
+ pciclk = tx4927_cpu_clock / 10;
+ break;
+ case TX4937_CCFG_PCIDIVMODE_11:
+ pciclk = tx4927_cpu_clock / 11;
+ break;
+ }
+
+ else
+ switch ((unsigned long) tx4927_ccfgptr->
+ ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
+ case TX4927_CCFG_PCIDIVMODE_2_5:
+ pciclk = tx4927_cpu_clock * 2 / 5;
+ break;
+ case TX4927_CCFG_PCIDIVMODE_3:
+ pciclk = tx4927_cpu_clock / 3;
+ break;
+ case TX4927_CCFG_PCIDIVMODE_5:
+ pciclk = tx4927_cpu_clock / 5;
+ break;
+ case TX4927_CCFG_PCIDIVMODE_6:
+ pciclk = tx4927_cpu_clock / 6;
+ break;
+ }
+
printk("Internal(%dMHz)", pciclk / 1000000);
} else {
int pciclk = 0;
@@ -814,24 +838,40 @@
":ResetRoutines\n");
_machine_restart = toshiba_rbtx4927_restart;
_machine_halt = toshiba_rbtx4927_halt;
- _machine_power_off = toshiba_rbtx4927_power_off;
+ pm_power_off = toshiba_rbtx4927_power_off;
#ifdef CONFIG_PCI
/* PCIC */
/*
* ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
- * PCIDIVMODE[12:11]'s initial value are given by S9[4:3] (ON:0, OFF:1).
+ *
+ * For TX4927:
+ * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1).
* CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5)
* CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3)
* CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5)
* CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6)
* i.e. S9[3]: ON (83MHz), OFF (100MHz)
+ *
+ * For TX4937:
+ * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1)
+ * PCIDIVMODE[10] is 0.
+ * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8)
+ * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4)
+ * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9)
+ * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5)
+ * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10)
+ * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5)
+ *
*/
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
- "ccfg is %lx, DIV is %x\n",
- (unsigned long) tx4927_ccfgptr->
- ccfg, TX4927_CCFG_PCIDIVMODE_MASK);
+ "ccfg is %lx, PCIDIVMODE is %x\n",
+ (unsigned long) tx4927_ccfgptr->ccfg,
+ (unsigned long) tx4927_ccfgptr->ccfg &
+ (mips_machtype == MACH_TOSHIBA_RBTX4937 ?
+ TX4937_CCFG_PCIDIVMODE_MASK :
+ TX4927_CCFG_PCIDIVMODE_MASK));
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
"PCI66 mode is %lx, PCI mode is %lx, pci arb is %lx\n",
@@ -842,20 +882,30 @@
(unsigned long) tx4927_ccfgptr->
ccfg & TX4927_CCFG_PCIXARB);
- TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
- "PCIDIVMODE is %lx\n",
- (unsigned long) tx4927_ccfgptr->
- ccfg & TX4927_CCFG_PCIDIVMODE_MASK);
-
- switch ((unsigned long) tx4927_ccfgptr->
- ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
- case TX4927_CCFG_PCIDIVMODE_2_5:
- case TX4927_CCFG_PCIDIVMODE_5:
- tx4927_cpu_clock = 166000000; /* 166MHz */
- break;
- default:
- tx4927_cpu_clock = 200000000; /* 200MHz */
- }
+ if (mips_machtype == MACH_TOSHIBA_RBTX4937)
+ switch ((unsigned long)tx4927_ccfgptr->
+ ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
+ case TX4937_CCFG_PCIDIVMODE_8:
+ case TX4937_CCFG_PCIDIVMODE_4:
+ tx4927_cpu_clock = 266666666; /* 266MHz */
+ break;
+ case TX4937_CCFG_PCIDIVMODE_9:
+ case TX4937_CCFG_PCIDIVMODE_4_5:
+ tx4927_cpu_clock = 300000000; /* 300MHz */
+ break;
+ default:
+ tx4927_cpu_clock = 333333333; /* 333MHz */
+ }
+ else
+ switch ((unsigned long)tx4927_ccfgptr->
+ ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
+ case TX4927_CCFG_PCIDIVMODE_2_5:
+ case TX4927_CCFG_PCIDIVMODE_5:
+ tx4927_cpu_clock = 166666666; /* 166MHz */
+ break;
+ default:
+ tx4927_cpu_clock = 200000000; /* 200MHz */
+ }
/* CCFG */
/* enable Timeout BusError */
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
index 9f1dcc8..5c7ace9 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c
+++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
@@ -20,6 +20,8 @@
#include <linux/interrupt.h>
#include <linux/console.h>
#include <linux/pci.h>
+#include <linux/pm.h>
+
#include <asm/wbflush.h>
#include <asm/reboot.h>
#include <asm/irq.h>
@@ -1003,7 +1005,7 @@
_machine_restart = rbtx4938_machine_restart;
_machine_halt = rbtx4938_machine_halt;
- _machine_power_off = rbtx4938_machine_power_off;
+ pm_power_off = rbtx4938_machine_power_off;
*rbtx4938_led_ptr = 0xff;
printk("RBTX4938 --- FPGA(Rev %02x)", *rbtx4938_fpga_rev_ptr);
diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c
index 02bf4f7..5e46979 100644
--- a/arch/mips/vr41xx/common/pmu.c
+++ b/arch/mips/vr41xx/common/pmu.c
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
+#include <linux/pm.h>
#include <linux/smp.h>
#include <linux/types.h>
@@ -114,7 +115,7 @@
_machine_restart = vr41xx_restart;
_machine_halt = vr41xx_halt;
- _machine_power_off = vr41xx_power_off;
+ pm_power_off = vr41xx_power_off;
return 0;
}
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index e77a06e..7c914a4 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -149,14 +149,20 @@
default y if SMP
select HOTPLUG
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y
+ depends on 64BIT
+
config ARCH_DISCONTIGMEM_ENABLE
- bool "Discontiguous memory support (EXPERIMENTAL)"
- depends on 64BIT && EXPERIMENTAL
- help
- Say Y to support efficient handling of discontiguous physical memory,
- for architectures which are either NUMA (Non-Uniform Memory Access)
- or have huge holes in the physical address space for other reasons.
- See <file:Documentation/vm/numa> for more.
+ def_bool y
+ depends on 64BIT
+
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+
+config ARCH_DISCONTIGMEM_DEFAULT
+ def_bool y
+ depends on ARCH_DISCONTIGMEM_ENABLE
source "kernel/Kconfig.hz"
source "mm/Kconfig"
diff --git a/arch/parisc/Kconfig.debug b/arch/parisc/Kconfig.debug
index 8caaed1..9166bd1 100644
--- a/arch/parisc/Kconfig.debug
+++ b/arch/parisc/Kconfig.debug
@@ -11,4 +11,14 @@
too many attempts. If you suspect a rwlock problem or a kernel
hacker asks for this option then say Y. Otherwise say N.
+config DEBUG_RODATA
+ bool "Write protect kernel read-only data structures"
+ depends on DEBUG_KERNEL
+ help
+ Mark the kernel read-only data as write-protected in the pagetables,
+ in order to catch accidental (and incorrect) writes to such const
+ data. This option may have a slight performance impact because a
+ portion of the kernel code won't be covered by a TLB anymore.
+ If in doubt, say "N".
+
endmenu
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index 8819e7e..37e9824 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc5-pa1
-# Fri Oct 21 23:06:10 2005
+# Linux kernel version: 2.6.16-rc1-pa0
+# Tue Jan 17 08:21:01 2006
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -29,8 +29,6 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
@@ -38,8 +36,10 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -48,8 +48,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -57,10 +59,28 @@
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
# Processor type and features
#
# CONFIG_PA7000 is not set
@@ -77,6 +97,7 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
@@ -84,8 +105,8 @@
# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
#
CONFIG_GSC=y
-# CONFIG_HPPB is not set
-# CONFIG_IOMMU_CCIO is not set
+CONFIG_HPPB=y
+CONFIG_IOMMU_CCIO=y
CONFIG_GSC_LASI=y
CONFIG_GSC_WAX=y
CONFIG_EISA=y
@@ -165,8 +186,11 @@
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -205,6 +229,7 @@
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
+CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_1284 is not set
@@ -230,14 +255,6 @@
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=y
#
@@ -281,6 +298,7 @@
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -313,21 +331,19 @@
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_ZALON is not set
+CONFIG_SCSI_ZALON=y
+CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
+CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
+CONFIG_SCSI_NCR53C8XX_SYNC=40
+# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
@@ -397,7 +413,7 @@
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
-# CONFIG_LASI_82596 is not set
+CONFIG_LASI_82596=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
@@ -464,6 +480,7 @@
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
@@ -527,7 +544,7 @@
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
-# CONFIG_KEYBOARD_HIL is not set
+CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
@@ -535,7 +552,7 @@
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_HIL is not set
+CONFIG_MOUSE_HIL=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
@@ -549,7 +566,8 @@
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_GSCPS2=y
-# CONFIG_HP_SDC is not set
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
@@ -569,6 +587,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=13
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -582,11 +601,10 @@
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_MUX is not set
-# CONFIG_PDC_CONSOLE is not set
+CONFIG_SERIAL_MUX=y
+CONFIG_SERIAL_MUX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -626,6 +644,12 @@
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -661,7 +685,6 @@
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
@@ -671,6 +694,7 @@
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
@@ -683,9 +707,7 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -695,6 +717,7 @@
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
@@ -713,7 +736,85 @@
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+
+#
+# GSC devices
+#
+CONFIG_SND_HARMONY=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
#
# USB support
@@ -723,6 +824,10 @@
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -877,18 +982,23 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_IOREMAP is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_RODATA is not set
#
# Security options
diff --git a/arch/parisc/hpux/entry_hpux.S b/arch/parisc/hpux/entry_hpux.S
index fa9bf38..31c8ccc 100644
--- a/arch/parisc/hpux/entry_hpux.S
+++ b/arch/parisc/hpux/entry_hpux.S
@@ -22,10 +22,9 @@
#include <linux/linkage.h>
#include <asm/unistd.h>
- .text
-
#define ENTRY_NAME(_name_) .word _name_
+ .section .rodata,"a"
.align 4
.export hpux_call_table
.import hpux_unimplemented_wrapper
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index 29b4d61..05273cc 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -468,19 +468,23 @@
if ( opcode == 1 ) { /* GETFSIND */
len = strlen_user((char *)arg1);
printk(KERN_DEBUG "len of arg1 = %d\n", len);
-
- fsname = (char *) kmalloc(len+1, GFP_KERNEL);
+ if (len == 0)
+ return 0;
+ fsname = (char *) kmalloc(len, GFP_KERNEL);
if ( !fsname ) {
printk(KERN_DEBUG "failed to kmalloc fsname\n");
return 0;
}
- if ( copy_from_user(fsname, (char *)arg1, len+1) ) {
+ if ( copy_from_user(fsname, (char *)arg1, len) ) {
printk(KERN_DEBUG "failed to copy_from_user fsname\n");
kfree(fsname);
return 0;
}
+ /* String could be altered by userspace after strlen_user() */
+ fsname[len] = '\0';
+
printk(KERN_DEBUG "that is '%s' as (char *)\n", fsname);
if ( !strcmp(fsname, "hfs") ) {
fstype = 0;
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index 2d804e2..3d569a4 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -408,11 +408,10 @@
struct parisc_device * create_tree_node(char id, struct device *parent)
{
- struct parisc_device *dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+ struct parisc_device *dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
- memset(dev, 0, sizeof(*dev));
dev->hw_path = id;
dev->id.hw_type = HPHW_FAULTY;
diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c
index f40a777..1d00c36 100644
--- a/arch/parisc/kernel/parisc_ksyms.c
+++ b/arch/parisc/kernel/parisc_ksyms.c
@@ -48,9 +48,6 @@
EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strpbrk);
-#include <linux/pm.h>
-EXPORT_SYMBOL(pm_power_off);
-
#include <asm/atomic.h>
EXPORT_SYMBOL(__xchg8);
EXPORT_SYMBOL(__xchg32);
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 88cba49..79c7db2 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -47,18 +47,17 @@
* this makes the boot time much longer than necessary.
* 20ms seems to work for all the HP PCI implementations to date.
*
- * XXX: turn into a #defined constant in <asm/pci.h> ?
+ * #define pci_post_reset_delay 50
*/
-int pci_post_reset_delay = 50;
-struct pci_port_ops *pci_port;
-struct pci_bios_ops *pci_bios;
+struct pci_port_ops *pci_port __read_mostly;
+struct pci_bios_ops *pci_bios __read_mostly;
-int pci_hba_count = 0;
+static int pci_hba_count __read_mostly;
/* parisc_pci_hba used by pci_port->in/out() ops to lookup bus data. */
#define PCI_HBA_MAX 32
-struct pci_hba_data *parisc_pci_hba[PCI_HBA_MAX];
+static struct pci_hba_data *parisc_pci_hba[PCI_HBA_MAX] __read_mostly;
/********************************************************************
@@ -259,8 +258,10 @@
void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
struct pci_bus_region *region)
{
+#ifdef CONFIG_64BIT
struct pci_bus *bus = dev->bus;
struct pci_hba_data *hba = HBA_DATA(bus->bridge->platform_data);
+#endif
if (res->flags & IORESOURCE_MEM) {
res->start = PCI_HOST_ADDR(hba, region->start);
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index 11d406c..53f861c 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -68,20 +68,20 @@
};
static int perf_processor_interface __read_mostly = UNKNOWN_INTF;
-static int perf_enabled __read_mostly = 0;
+static int perf_enabled __read_mostly;
static spinlock_t perf_lock;
-struct parisc_device *cpu_device __read_mostly = NULL;
+struct parisc_device *cpu_device __read_mostly;
/* RDRs to write for PCX-W */
-static int perf_rdrs_W[] =
+static const int perf_rdrs_W[] =
{ 0, 1, 4, 5, 6, 15, 16, 17, 18, 20, 21, 22, 23, 24, 25, -1 };
/* RDRs to write for PCX-U */
-static int perf_rdrs_U[] =
+static const int perf_rdrs_U[] =
{ 0, 1, 4, 5, 6, 7, 16, 17, 18, 20, 21, 22, 23, 24, 25, -1 };
/* RDR register descriptions for PCX-W */
-static struct rdr_tbl_ent perf_rdr_tbl_W[] = {
+static const struct rdr_tbl_ent perf_rdr_tbl_W[] = {
{ 19, 1, 8 }, /* RDR 0 */
{ 16, 1, 16 }, /* RDR 1 */
{ 72, 2, 0 }, /* RDR 2 */
@@ -117,7 +117,7 @@
};
/* RDR register descriptions for PCX-U */
-static struct rdr_tbl_ent perf_rdr_tbl_U[] = {
+static const struct rdr_tbl_ent perf_rdr_tbl_U[] = {
{ 19, 1, 8 }, /* RDR 0 */
{ 32, 1, 16 }, /* RDR 1 */
{ 20, 1, 0 }, /* RDR 2 */
@@ -156,7 +156,7 @@
* A non-zero write_control in the above tables is a byte offset into
* this array.
*/
-static uint64_t perf_bitmasks[] = {
+static const uint64_t perf_bitmasks[] = {
0x0000000000000000ul, /* first dbl word must be zero */
0xfdffe00000000000ul, /* RDR0 bitmask */
0x003f000000000000ul, /* RDR1 bitmask */
@@ -173,7 +173,7 @@
* Write control bitmasks for Pa-8700 processor given
* somethings have changed slightly.
*/
-static uint64_t perf_bitmasks_piranha[] = {
+static const uint64_t perf_bitmasks_piranha[] = {
0x0000000000000000ul, /* first dbl word must be zero */
0xfdffe00000000000ul, /* RDR0 bitmask */
0x003f000000000000ul, /* RDR1 bitmask */
@@ -186,7 +186,7 @@
0xfffc000000000000ul
};
-static uint64_t *bitmask_array; /* array of bitmasks to use */
+static const uint64_t *bitmask_array; /* array of bitmasks to use */
/******************************************************************************
* Function Prototypes
@@ -200,7 +200,7 @@
static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
static void perf_start_counters(void);
static int perf_stop_counters(uint32_t *raddr);
-static struct rdr_tbl_ent * perf_rdr_get_entry(uint32_t rdr_num);
+static const struct rdr_tbl_ent * perf_rdr_get_entry(uint32_t rdr_num);
static int perf_rdr_read_ubuf(uint32_t rdr_num, uint64_t *buffer);
static int perf_rdr_clear(uint32_t rdr_num);
static int perf_write_image(uint64_t *memaddr);
@@ -444,7 +444,6 @@
uint32_t raddr[4];
int error = 0;
- lock_kernel();
switch (cmd) {
case PA_PERF_ON:
@@ -477,8 +476,6 @@
error = -ENOTTY;
}
- unlock_kernel();
-
return error;
}
@@ -655,7 +652,7 @@
* Retrieve a pointer to the description of what this
* RDR contains.
*/
-static struct rdr_tbl_ent * perf_rdr_get_entry(uint32_t rdr_num)
+static const struct rdr_tbl_ent * perf_rdr_get_entry(uint32_t rdr_num)
{
if (perf_processor_interface == ONYX_INTF) {
return &perf_rdr_tbl_U[rdr_num];
@@ -673,7 +670,7 @@
{
uint64_t data, data_mask = 0;
uint32_t width, xbits, i;
- struct rdr_tbl_ent *tentry;
+ const struct rdr_tbl_ent *tentry;
tentry = perf_rdr_get_entry(rdr_num);
if ((width = tentry->width) == 0)
@@ -721,7 +718,7 @@
*/
static int perf_rdr_clear(uint32_t rdr_num)
{
- struct rdr_tbl_ent *tentry;
+ const struct rdr_tbl_ent *tentry;
int32_t i;
tentry = perf_rdr_get_entry(rdr_num);
@@ -753,10 +750,11 @@
uint64_t buffer[MAX_RDR_WORDS];
uint64_t *bptr;
uint32_t dwords;
- uint32_t *intrigue_rdr;
- uint64_t *intrigue_bitmask, tmp64;
+ const uint32_t *intrigue_rdr;
+ const uint64_t *intrigue_bitmask;
+ uint64_t tmp64;
void __iomem *runway;
- struct rdr_tbl_ent *tentry;
+ const struct rdr_tbl_ent *tentry;
int i;
/* Clear out counters */
@@ -830,7 +828,7 @@
*/
static void perf_rdr_write(uint32_t rdr_num, uint64_t *buffer)
{
- struct rdr_tbl_ent *tentry;
+ const struct rdr_tbl_ent *tentry;
int32_t i;
printk("perf_rdr_write\n");
diff --git a/arch/parisc/kernel/perf_images.h b/arch/parisc/kernel/perf_images.h
index d9562fe..7fef964 100644
--- a/arch/parisc/kernel/perf_images.h
+++ b/arch/parisc/kernel/perf_images.h
@@ -25,7 +25,7 @@
#define PCXU_IMAGE_SIZE 584
-static uint32_t onyx_images[][PCXU_IMAGE_SIZE/sizeof(uint32_t)] = {
+static uint32_t onyx_images[][PCXU_IMAGE_SIZE/sizeof(uint32_t)] __read_mostly = {
/*
* CPI:
*
@@ -2093,7 +2093,7 @@
};
#define PCXW_IMAGE_SIZE 576
-static uint32_t cuda_images[][PCXW_IMAGE_SIZE/sizeof(uint32_t)] = {
+static uint32_t cuda_images[][PCXW_IMAGE_SIZE/sizeof(uint32_t)] __read_mostly = {
/*
* CPI: FROM CPI.IDF (Image 0)
*
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 5da4167..e8dea41 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -54,27 +54,6 @@
#include <asm/uaccess.h>
#include <asm/unwind.h>
-static int hlt_counter __read_mostly;
-
-/*
- * Power off function, if any
- */
-void (*pm_power_off)(void);
-
-void disable_hlt(void)
-{
- hlt_counter++;
-}
-
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
- hlt_counter--;
-}
-
-EXPORT_SYMBOL(enable_hlt);
-
void default_idle(void)
{
barrier();
@@ -102,12 +81,7 @@
}
-#ifdef __LP64__
-#define COMMAND_GLOBAL 0xfffffffffffe0030UL
-#else
-#define COMMAND_GLOBAL 0xfffe0030
-#endif
-
+#define COMMAND_GLOBAL F_EXTEND(0xfffe0030)
#define CMD_RESET 5 /* reset any module */
/*
@@ -162,6 +136,7 @@
*/
}
+void (*chassis_power_off)(void);
/*
* This routine is called from sys_reboot to actually turn off the
@@ -170,8 +145,8 @@
void machine_power_off(void)
{
/* If there is a registered power off handler, call it. */
- if(pm_power_off)
- pm_power_off();
+ if (chassis_power_off)
+ chassis_power_off();
/* Put the soft power button back under hardware control.
* If the user had already pressed the power button, the
@@ -187,6 +162,8 @@
KERN_EMERG "Please power this system off now.");
}
+void (*pm_power_off)(void) = machine_power_off;
+EXPORT_SYMBOL(pm_power_off);
/*
* Create a kernel thread
diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
index 27160e8..413292f 100644
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@@ -91,7 +91,7 @@
int copied;
#ifdef __LP64__
- if (is_compat_task(child)) {
+ if (personality(child->personality) == PER_LINUX32) {
unsigned int tmp;
addr &= 0xffffffffL;
@@ -123,7 +123,7 @@
case PTRACE_POKEDATA:
ret = 0;
#ifdef __LP64__
- if (is_compat_task(child)) {
+ if (personality(child->personality) == PER_LINUX32) {
unsigned int tmp = (unsigned int)data;
DBG("sys_ptrace(POKE%s, %d, %lx, %lx)\n",
request == PTRACE_POKETEXT ? "TEXT" : "DATA",
@@ -146,7 +146,7 @@
case PTRACE_PEEKUSR: {
ret = -EIO;
#ifdef __LP64__
- if (is_compat_task(child)) {
+ if (personality(child->personality) == PER_LINUX32) {
unsigned int tmp;
if (addr & (sizeof(int)-1))
@@ -205,7 +205,7 @@
goto out_tsk;
}
#ifdef __LP64__
- if (is_compat_task(child)) {
+ if (personality(child->personality) == PER_LINUX32) {
if (addr & (sizeof(int)-1))
goto out_tsk;
if ((addr = translate_usr_offset(addr)) < 0)
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 3a25a7bd..05767e8 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -317,7 +317,7 @@
if(personality(current->personality) == PER_LINUX32) {
DBG(1,"setup_rt_frame: frame->info = 0x%p\n", &compat_frame->info);
- err |= compat_copy_siginfo_to_user(&compat_frame->info, info);
+ err |= copy_siginfo_to_user32(&compat_frame->info, info);
DBG(1,"SETUP_RT_FRAME: 1\n");
compat_val = (compat_int_t)current->sas_ss_sp;
err |= __put_user(compat_val, &compat_frame->uc.uc_stack.ss_sp);
diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c
index 0792e20..a6b4231 100644
--- a/arch/parisc/kernel/signal32.c
+++ b/arch/parisc/kernel/signal32.c
@@ -31,7 +31,6 @@
#include <linux/types.h>
#include <linux/errno.h>
-#include <asm/compat_signal.h>
#include <asm/uaccess.h>
#include "signal32.h"
@@ -398,3 +397,104 @@
return err;
}
+
+int
+copy_siginfo_from_user32 (siginfo_t *to, compat_siginfo_t __user *from)
+{
+ unsigned long tmp;
+ int err;
+
+ if (!access_ok(VERIFY_READ, from, sizeof(compat_siginfo_t)))
+ return -EFAULT;
+
+ err = __get_user(to->si_signo, &from->si_signo);
+ err |= __get_user(to->si_errno, &from->si_errno);
+ err |= __get_user(to->si_code, &from->si_code);
+
+ if (to->si_code < 0)
+ err |= __copy_from_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
+ else {
+ switch (to->si_code >> 16) {
+ case __SI_CHLD >> 16:
+ err |= __get_user(to->si_utime, &from->si_utime);
+ err |= __get_user(to->si_stime, &from->si_stime);
+ err |= __get_user(to->si_status, &from->si_status);
+ default:
+ err |= __get_user(to->si_pid, &from->si_pid);
+ err |= __get_user(to->si_uid, &from->si_uid);
+ break;
+ case __SI_FAULT >> 16:
+ err |= __get_user(tmp, &from->si_addr);
+ to->si_addr = (void __user *) tmp;
+ break;
+ case __SI_POLL >> 16:
+ err |= __get_user(to->si_band, &from->si_band);
+ err |= __get_user(to->si_fd, &from->si_fd);
+ break;
+ case __SI_RT >> 16: /* This is not generated by the kernel as of now. */
+ case __SI_MESGQ >> 16:
+ err |= __get_user(to->si_pid, &from->si_pid);
+ err |= __get_user(to->si_uid, &from->si_uid);
+ err |= __get_user(to->si_int, &from->si_int);
+ break;
+ }
+ }
+ return err;
+}
+
+int
+copy_siginfo_to_user32 (compat_siginfo_t __user *to, siginfo_t *from)
+{
+ unsigned int addr;
+ int err;
+
+ if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
+ return -EFAULT;
+
+ /* If you change siginfo_t structure, please be sure
+ this code is fixed accordingly.
+ It should never copy any pad contained in the structure
+ to avoid security leaks, but must copy the generic
+ 3 ints plus the relevant union member.
+ This routine must convert siginfo from 64bit to 32bit as well
+ at the same time. */
+ err = __put_user(from->si_signo, &to->si_signo);
+ err |= __put_user(from->si_errno, &to->si_errno);
+ err |= __put_user((short)from->si_code, &to->si_code);
+ if (from->si_code < 0)
+ err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
+ else {
+ switch (from->si_code >> 16) {
+ case __SI_CHLD >> 16:
+ err |= __put_user(from->si_utime, &to->si_utime);
+ err |= __put_user(from->si_stime, &to->si_stime);
+ err |= __put_user(from->si_status, &to->si_status);
+ default:
+ err |= __put_user(from->si_pid, &to->si_pid);
+ err |= __put_user(from->si_uid, &to->si_uid);
+ break;
+ case __SI_FAULT >> 16:
+ /* avoid type-checking warnings by copying _pad[0] in lieu of si_addr... */
+ err |= __put_user(from->_sifields._pad[0], &to->si_addr);
+ break;
+ case __SI_POLL >> 16:
+ err |= __put_user(from->si_band, &to->si_band);
+ err |= __put_user(from->si_fd, &to->si_fd);
+ break;
+ case __SI_TIMER >> 16:
+ err |= __put_user(from->si_tid, &to->si_tid);
+ err |= __put_user(from->si_overrun, &to->si_overrun);
+ addr = (unsigned long) from->si_ptr;
+ err |= __put_user(addr, &to->si_ptr);
+ break;
+ case __SI_RT >> 16: /* Not generated by the kernel as of now. */
+ case __SI_MESGQ >> 16:
+ err |= __put_user(from->si_uid, &to->si_uid);
+ err |= __put_user(from->si_pid, &to->si_pid);
+ addr = (unsigned long) from->si_ptr;
+ err |= __put_user(addr, &to->si_ptr);
+ break;
+ }
+ }
+ return err;
+}
diff --git a/arch/parisc/kernel/signal32.h b/arch/parisc/kernel/signal32.h
index 4d1569e..e39b38a 100644
--- a/arch/parisc/kernel/signal32.h
+++ b/arch/parisc/kernel/signal32.h
@@ -20,8 +20,34 @@
#define _PARISC64_KERNEL_SIGNAL32_H
#include <linux/compat.h>
-#include <asm/compat_signal.h>
-#include <asm/compat_rt_sigframe.h>
+
+typedef compat_uptr_t compat_sighandler_t;
+
+typedef struct compat_sigaltstack {
+ compat_uptr_t ss_sp;
+ compat_int_t ss_flags;
+ compat_size_t ss_size;
+} compat_stack_t;
+
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+struct compat_sigaction {
+ compat_sighandler_t sa_handler;
+ compat_uint_t sa_flags;
+ compat_sigset_t sa_mask; /* mask last for extensibility */
+};
+
+/* 32-bit ucontext as seen from an 64-bit kernel */
+struct compat_ucontext {
+ compat_uint_t uc_flags;
+ compat_uptr_t uc_link;
+ compat_stack_t uc_stack; /* struct compat_sigaltstack (12 bytes)*/
+ /* FIXME: Pad out to get uc_mcontext to start at an 8-byte aligned boundary */
+ compat_uint_t pad[1];
+ struct compat_sigcontext uc_mcontext;
+ compat_sigset_t uc_sigmask; /* mask last for extensibility */
+};
/* ELF32 signal handling */
@@ -29,6 +55,103 @@
struct compat_sigaction sa;
};
+typedef struct compat_siginfo {
+ int si_signo;
+ int si_errno;
+ int si_code;
+
+ union {
+ int _pad[((128/sizeof(int)) - 3)];
+
+ /* kill() */
+ struct {
+ unsigned int _pid; /* sender's pid */
+ unsigned int _uid; /* sender's uid */
+ } _kill;
+
+ /* POSIX.1b timers */
+ struct {
+ compat_timer_t _tid; /* timer id */
+ int _overrun; /* overrun count */
+ char _pad[sizeof(unsigned int) - sizeof(int)];
+ compat_sigval_t _sigval; /* same as below */
+ int _sys_private; /* not to be passed to user */
+ } _timer;
+
+ /* POSIX.1b signals */
+ struct {
+ unsigned int _pid; /* sender's pid */
+ unsigned int _uid; /* sender's uid */
+ compat_sigval_t _sigval;
+ } _rt;
+
+ /* SIGCHLD */
+ struct {
+ unsigned int _pid; /* which child */
+ unsigned int _uid; /* sender's uid */
+ int _status; /* exit code */
+ compat_clock_t _utime;
+ compat_clock_t _stime;
+ } _sigchld;
+
+ /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+ struct {
+ unsigned int _addr; /* faulting insn/memory ref. */
+ } _sigfault;
+
+ /* SIGPOLL */
+ struct {
+ int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
+ int _fd;
+ } _sigpoll;
+ } _sifields;
+} compat_siginfo_t;
+
+int copy_siginfo_to_user32 (compat_siginfo_t __user *to, siginfo_t *from);
+int copy_siginfo_from_user32 (siginfo_t *to, compat_siginfo_t __user *from);
+
+/* In a deft move of uber-hackery, we decide to carry the top half of all
+ * 64-bit registers in a non-portable, non-ABI, hidden structure.
+ * Userspace can read the hidden structure if it *wants* but is never
+ * guaranteed to be in the same place. Infact the uc_sigmask from the
+ * ucontext_t structure may push the hidden register file downards
+ */
+struct compat_regfile {
+ /* Upper half of all the 64-bit registers that were truncated
+ on a copy to a 32-bit userspace */
+ compat_int_t rf_gr[32];
+ compat_int_t rf_iasq[2];
+ compat_int_t rf_iaoq[2];
+ compat_int_t rf_sar;
+};
+
+#define COMPAT_SIGRETURN_TRAMP 4
+#define COMPAT_SIGRESTARTBLOCK_TRAMP 5
+#define COMPAT_TRAMP_SIZE (COMPAT_SIGRETURN_TRAMP + \
+ COMPAT_SIGRESTARTBLOCK_TRAMP)
+
+struct compat_rt_sigframe {
+ /* XXX: Must match trampoline size in arch/parisc/kernel/signal.c
+ Secondary to that it must protect the ERESTART_RESTARTBLOCK
+ trampoline we left on the stack (we were bad and didn't
+ change sp so we could run really fast.) */
+ compat_uint_t tramp[COMPAT_TRAMP_SIZE];
+ compat_siginfo_t info;
+ struct compat_ucontext uc;
+ /* Hidden location of truncated registers, *must* be last. */
+ struct compat_regfile regs;
+};
+
+/*
+ * The 32-bit ABI wants at least 48 bytes for a function call frame:
+ * 16 bytes for arg0-arg3, and 32 bytes for magic (the only part of
+ * which Linux/parisc uses is sp-20 for the saved return pointer...)
+ * Then, the stack pointer must be rounded to a cache line (64 bytes).
+ */
+#define SIGFRAME32 64
+#define FUNCTIONCALLFRAME32 48
+#define PARISC_RT_SIGFRAME_SIZE32 (((sizeof(struct compat_rt_sigframe) + FUNCTIONCALLFRAME32) + SIGFRAME32) & -SIGFRAME32)
+
void sigset_32to64(sigset_t *s64, compat_sigset_t *s32);
void sigset_64to32(compat_sigset_t *s32, sigset_t *s64);
int do_sigaltstack32 (const compat_stack_t __user *uss32,
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index d661634..af88afe 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -650,6 +650,8 @@
#define LWS_ENTRY(_name_) .word (lws_##_name_ - linux_gateway_page)
#endif
+ .section .rodata,"a"
+
.align 4096
/* Light-weight-syscall table */
/* Start of lws table. */
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 32cbc04..51d2480 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -374,5 +374,24 @@
ENTRY_SAME(keyctl)
ENTRY_SAME(ioprio_set)
ENTRY_SAME(ioprio_get)
+ ENTRY_SAME(inotify_init)
+ ENTRY_SAME(inotify_add_watch) /* 270 */
+ ENTRY_SAME(inotify_rm_watch)
+ ENTRY_COMP(pselect6)
+ ENTRY_COMP(ppoll)
+ ENTRY_SAME(migrate_pages)
+ ENTRY_COMP(openat) /* 275 */
+ ENTRY_SAME(mkdirat)
+ ENTRY_SAME(mknodat)
+ ENTRY_SAME(fchownat)
+ ENTRY_COMP(futimesat)
+ ENTRY_COMP(newfstatat) /* 280 */
+ ENTRY_SAME(unlinkat)
+ ENTRY_SAME(renameat)
+ ENTRY_SAME(linkat)
+ ENTRY_SAME(symlinkat)
+ ENTRY_SAME(readlinkat) /* 285 */
+ ENTRY_SAME(fchmodat)
+ ENTRY_SAME(faccessat)
/* Nothing yet */
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 15914f0..ff20060 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -193,10 +193,9 @@
HERE:
asm volatile ("copy %%r30, %0" : "=r"(sp));
- r = (struct pt_regs *)kmalloc(sizeof(struct pt_regs), GFP_KERNEL);
+ r = kzalloc(sizeof(struct pt_regs), GFP_KERNEL);
if (!r)
return;
- memset(r, 0, sizeof(struct pt_regs));
r->iaoq[0] = (unsigned long)&&HERE;
r->gr[2] = (unsigned long)__builtin_return_address(0);
r->gr[30] = sp;
diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c
index f84f258..66c8a9f 100644
--- a/arch/parisc/math-emu/decode_exc.c
+++ b/arch/parisc/math-emu/decode_exc.c
@@ -337,6 +337,7 @@
}
break;
case INVALIDEXCEPTION:
+ case OPC_2E_INVALIDEXCEPTION:
update_trap_counts(Fpu_register, aflags, bflags, trap_counts);
return SIGNALCODE(SIGFPE, FPE_FLTINV);
case DIVISIONBYZEROEXCEPTION:
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 720287d..7847ca1 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -371,17 +371,11 @@
void free_initmem(void)
{
- /* FIXME: */
-#if 0
- printk(KERN_INFO "NOT FREEING INITMEM (%dk)\n",
- (&__init_end - &__init_begin) >> 10);
- return;
-#else
unsigned long addr;
printk(KERN_INFO "Freeing unused kernel memory: ");
-#if 1
+#ifdef CONFIG_DEBUG_KERNEL
/* Attempt to catch anyone trying to execute code here
* by filling the page with BRK insns.
*
@@ -414,9 +408,21 @@
pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
printk("%luk freed\n", (unsigned long)(&__init_end - &__init_begin) >> 10);
-#endif
}
+
+#ifdef CONFIG_DEBUG_RODATA
+void mark_rodata_ro(void)
+{
+ extern char __start_rodata, __end_rodata;
+ /* rodata memory was already mapped with KERNEL_RO access rights by
+ pagetable_init() and map_pages(). No need to do additional stuff here */
+ printk (KERN_INFO "Write protecting the kernel read-only data: %luk\n",
+ (unsigned long)(&__end_rodata - &__start_rodata) >> 10);
+}
+#endif
+
+
/*
* Just an arbitrary offset to serve as a "hole" between mapping areas
* (between top of physical memory and a potential pcxl dma mapping
@@ -477,11 +483,6 @@
}
-int do_check_pgt_cache(int low, int high)
-{
- return 0;
-}
-
unsigned long *empty_zero_page __read_mostly;
void show_mem(void)
@@ -690,7 +691,7 @@
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_end && initrd_end > mem_limit) {
- printk("initrd: mapping %08lx-%08lx\n", initrd_start, initrd_end);
+ printk(KERN_INFO "initrd: mapping %08lx-%08lx\n", initrd_start, initrd_end);
map_pages(initrd_start, __pa(initrd_start),
initrd_end - initrd_start, PAGE_KERNEL);
}
@@ -792,8 +793,6 @@
EXPORT_SYMBOL(map_hpux_gateway_page);
#endif
-extern void flush_tlb_all_local(void);
-
void __init paging_init(void)
{
int i;
@@ -802,7 +801,7 @@
pagetable_init();
gateway_init();
flush_cache_all_local(); /* start with known state */
- flush_tlb_all_local();
+ flush_tlb_all_local(NULL);
for (i = 0; i < npmem_ranges; i++) {
unsigned long zones_size[MAX_NR_ZONES] = { 0, 0, 0 };
@@ -993,7 +992,7 @@
do_recycle++;
}
spin_unlock(&sid_lock);
- on_each_cpu((void (*)(void *))flush_tlb_all_local, NULL, 1, 1);
+ on_each_cpu(flush_tlb_all_local, NULL, 1, 1);
if (do_recycle) {
spin_lock(&sid_lock);
recycle_sids(recycle_ndirty,recycle_dirty_array);
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index e4362df..340730f 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -66,7 +66,7 @@
#else
ld r4,PACACURRENT(r13)
addi r5,r4,THREAD /* Get THREAD */
- ld r4,THREAD_FPEXC_MODE(r5)
+ lwz r4,THREAD_FPEXC_MODE(r5)
ori r12,r12,MSR_FP
or r12,r12,r4
std r12,_MSR(r1)
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 3082684..4156596 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -749,11 +749,12 @@
.globl decrementer_iSeries_masked
decrementer_iSeries_masked:
+ /* We may not have a valid TOC pointer in here. */
li r11,1
ld r12,PACALPPACAPTR(r13)
stb r11,LPPACADECRINT(r12)
- LOAD_REG_ADDRBASE(r12,tb_ticks_per_jiffy)
- lwz r12,ADDROFF(tb_ticks_per_jiffy)(r12)
+ LOAD_REG_IMMEDIATE(r12, tb_ticks_per_jiffy)
+ lwz r12,0(r12)
mtspr SPRN_DEC,r12
/* fall through */
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 4d9b438..946f321 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -334,9 +334,6 @@
spin_unlock_irqrestore(&(tbl->it_lock), flags);
- /* Make sure updates are seen by hardware */
- mb();
-
DBG("mapped %d elements:\n", outcount);
/* For the sake of iommu_unmap_sg, we clear out the length in the
@@ -347,6 +344,10 @@
outs->dma_address = DMA_ERROR_CODE;
outs->dma_length = 0;
}
+
+ /* Make sure updates are seen by hardware */
+ mb();
+
return outcount;
failure:
@@ -358,6 +359,8 @@
npages = (PAGE_ALIGN(s->dma_address + s->dma_length) - vaddr)
>> PAGE_SHIFT;
__iommu_free(tbl, vaddr, npages);
+ s->dma_address = DMA_ERROR_CODE;
+ s->dma_length = 0;
}
}
spin_unlock_irqrestore(&(tbl->it_lock), flags);
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index f970ace..c7a799a 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -134,7 +134,6 @@
return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags);
}
-#ifdef CONFIG_ISA
static int __init add_legacy_isa_port(struct device_node *np,
struct device_node *isa_brg)
{
@@ -168,7 +167,6 @@
return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ, UPF_BOOT_AUTOCONF);
}
-#endif
#ifdef CONFIG_PCI
static int __init add_legacy_pci_port(struct device_node *np,
@@ -276,7 +274,6 @@
of_node_put(soc);
}
-#ifdef CONFIG_ISA
/* First fill our array with ISA ports */
for (np = NULL; (np = of_find_node_by_type(np, "serial"));) {
struct device_node *isa = of_get_parent(np);
@@ -287,7 +284,6 @@
}
of_node_put(isa);
}
-#endif
#ifdef CONFIG_PCI
/* Next, try to locate PCI ports */
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index d50c8df..294832a 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -491,7 +491,12 @@
size = 16;
finish_node(allnodes, &size, 1);
size -= 16;
- end = start = (unsigned long) __va(lmb_alloc(size, 128));
+
+ if (0 == size)
+ end = start = 0;
+ else
+ end = start = (unsigned long)__va(lmb_alloc(size, 128));
+
finish_node(allnodes, &end, 0);
BUG_ON(end != start + size);
@@ -1398,8 +1403,8 @@
read_lock(&devtree_lock);
np = from ? from->allnext : allnodes;
- for (; np != 0; np = np->allnext)
- if (np->name != 0 && strcasecmp(np->name, name) == 0
+ for (; np != NULL; np = np->allnext)
+ if (np->name != NULL && strcasecmp(np->name, name) == 0
&& of_node_get(np))
break;
if (from)
@@ -1917,3 +1922,30 @@
return 0;
}
+
+#ifdef CONFIG_KEXEC
+/* We may have allocated the flat device tree inside the crash kernel region
+ * in prom_init. If so we need to move it out into regular memory. */
+void kdump_move_device_tree(void)
+{
+ unsigned long start, end;
+ struct boot_param_header *new;
+
+ start = __pa((unsigned long)initial_boot_params);
+ end = start + initial_boot_params->totalsize;
+
+ if (end < crashk_res.start || start > crashk_res.end)
+ return;
+
+ new = (struct boot_param_header*)
+ __va(lmb_alloc(initial_boot_params->totalsize, PAGE_SIZE));
+
+ memcpy(new, initial_boot_params, initial_boot_params->totalsize);
+
+ initial_boot_params = new;
+
+ DBG("Flat device tree blob moved to %p\n", initial_boot_params);
+
+ /* XXX should we unreserve the old DT? */
+}
+#endif /* CONFIG_KEXEC */
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 7881ec9..ec7153f 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2098,6 +2098,10 @@
*/
prom_init_stdout();
+ /* Bail if this is a kdump kernel. */
+ if (PHYSICAL_START > 0)
+ prom_panic("Error: You can't boot a kdump kernel from OF!\n");
+
/*
* Check for an initrd
*/
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index a8099c8..3934c22 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -465,8 +465,10 @@
if (parent == NULL)
return NULL;
bus = of_match_bus(parent);
- if (strcmp(bus->name, "pci"))
+ if (strcmp(bus->name, "pci")) {
+ of_node_put(parent);
return NULL;
+ }
bus->count_cells(dev, &na, &ns);
of_node_put(parent);
if (!OF_CHECK_COUNTS(na, ns))
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 7fe4a5c..b5b2add 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -22,6 +22,7 @@
#include <asm/prom.h>
#include <asm/rtas.h>
+#include <asm/hvcall.h>
#include <asm/semaphore.h>
#include <asm/machdep.h>
#include <asm/page.h>
@@ -565,6 +566,7 @@
#ifdef CONFIG_PPC_PSERIES
static void rtas_percpu_suspend_me(void *info)
{
+ int i;
long rc;
long flags;
struct rtas_suspend_me_data *data =
@@ -587,18 +589,16 @@
if (rc == H_Continue) {
data->waiting = 0;
- rtas_call(ibm_suspend_me_token, 0, 1,
- data->args->args);
+ data->args->args[data->args->nargs] =
+ rtas_call(ibm_suspend_me_token, 0, 1, NULL);
+ for_each_cpu(i)
+ plpar_hcall_norets(H_PROD,i);
} else {
data->waiting = -EBUSY;
printk(KERN_ERR "Error on H_Join hypervisor call\n");
}
out:
- /* before we restore interrupts, make sure we don't
- * generate a spurious soft lockup errors
- */
- touch_softlockup_watchdog();
local_irq_restore(flags);
return;
}
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 5050009..aaf384c 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -672,8 +672,7 @@
static void remove_flash_pde(struct proc_dir_entry *dp)
{
if (dp) {
- if (dp->data != NULL)
- kfree(dp->data);
+ kfree(dp->data);
dp->owner = NULL;
remove_proc_entry(dp->name, dp->parent);
}
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index e29b275..a717dff 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -398,6 +398,9 @@
{
DBG(" -> setup_system()\n");
+#ifdef CONFIG_KEXEC
+ kdump_move_device_tree();
+#endif
/*
* Unflatten the device-tree passed by prom_init or kexec
*/
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 3747ab0..bd837b5d 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -142,11 +142,7 @@
return 0;
}
-static inline compat_uptr_t to_user_ptr(void *kp)
-{
- return (compat_uptr_t)(u64)kp;
-}
-
+#define to_user_ptr(p) ptr_to_compat(p)
#define from_user_ptr(p) compat_ptr(p)
static inline int save_general_regs(struct pt_regs *regs,
@@ -213,8 +209,8 @@
return 0;
}
-#define to_user_ptr(p) (p)
-#define from_user_ptr(p) (p)
+#define to_user_ptr(p) ((unsigned long)(p))
+#define from_user_ptr(p) ((void __user *)(p))
static inline int save_general_regs(struct pt_regs *regs,
struct mcontext __user *frame)
@@ -254,11 +250,9 @@
*/
long sys_sigsuspend(old_sigset_t mask)
{
- sigset_t saveset;
-
mask &= _BLOCKABLE;
spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
siginitset(¤t->blocked, mask);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
@@ -528,7 +522,7 @@
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
- ret = put_user((long)old_ka.sa.sa_handler, &oact->sa_handler);
+ ret = put_user(to_user_ptr(old_ka.sa.sa_handler), &oact->sa_handler);
ret |= put_sigset_t(&oact->sa_mask, &old_ka.sa.sa_mask);
ret |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
}
@@ -677,8 +671,8 @@
int compat_sys_sigaltstack(u32 __new, u32 __old, int r5,
int r6, int r7, int r8, struct pt_regs *regs)
{
- stack_32_t __user * newstack = (stack_32_t __user *)(long) __new;
- stack_32_t __user * oldstack = (stack_32_t __user *)(long) __old;
+ stack_32_t __user * newstack = compat_ptr(__new);
+ stack_32_t __user * oldstack = compat_ptr(__old);
stack_t uss, uoss;
int ret;
mm_segment_t old_fs;
@@ -710,7 +704,7 @@
set_fs(old_fs);
/* Copy the stack information to the user output buffer */
if (!ret && oldstack &&
- (put_user((long)uoss.ss_sp, &oldstack->ss_sp) ||
+ (put_user(ptr_to_compat(uoss.ss_sp), &oldstack->ss_sp) ||
__put_user(uoss.ss_flags, &oldstack->ss_flags) ||
__put_user(uoss.ss_size, &oldstack->ss_size)))
return -EFAULT;
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index b319311..497a5d3 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -60,8 +60,8 @@
struct ucontext uc;
unsigned long _unused[2];
unsigned int tramp[TRAMP_SIZE];
- struct siginfo *pinfo;
- void *puc;
+ struct siginfo __user *pinfo;
+ void __user *puc;
struct siginfo info;
/* 64 bit ABI allows for 288 bytes below sp before decrementing it. */
char abigap[288];
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index c8458c5..13595a6 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -540,6 +540,9 @@
if (smp_ops->take_timebase)
smp_ops->take_timebase();
+ if (system_state > SYSTEM_BOOTING)
+ per_cpu(last_jiffy, cpu) = get_tb();
+
spin_lock(&call_lock);
cpu_set(cpu, cpu_online_map);
spin_unlock(&call_lock);
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index c4a294d..1886045 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -612,10 +612,10 @@
ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */
node_found = 0;
- if (cpu != 0) {
+ if (cpu) {
fp = (unsigned int *)get_property(cpu, "timebase-frequency",
NULL);
- if (fp != 0) {
+ if (fp) {
node_found = 1;
ppc_tb_freq = *fp;
}
@@ -626,10 +626,10 @@
ppc_proc_freq = DEFAULT_PROC_FREQ;
node_found = 0;
- if (cpu != 0) {
+ if (cpu) {
fp = (unsigned int *)get_property(cpu, "clock-frequency",
NULL);
- if (fp != 0) {
+ if (fp) {
node_found = 1;
ppc_proc_freq = *fp;
}
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 2da65a9..5d29dcc 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -144,7 +144,7 @@
}
#ifdef CONFIG_PPC_MAPLE
-void udbg_maple_real_putc(unsigned char c)
+void udbg_maple_real_putc(char c)
{
if (udbg_comport) {
while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c
index 9584608..bbe3eac 100644
--- a/arch/powerpc/mm/lmb.c
+++ b/arch/powerpc/mm/lmb.c
@@ -197,6 +197,8 @@
{
struct lmb_region *_rgn = &(lmb.reserved);
+ BUG_ON(0 == size);
+
return lmb_add_region(_rgn, base, size);
}
@@ -227,6 +229,8 @@
long i, j;
unsigned long base = 0;
+ BUG_ON(0 == size);
+
#ifdef CONFIG_PPC32
/* On 32-bit, make sure we allocate lowmem */
if (max_addr == LMB_ALLOC_ANYWHERE)
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 15aac0d..550517c 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -435,17 +435,12 @@
{
clear_page(page);
- if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
- return;
/*
* We shouldnt have to do this, but some versions of glibc
* require it (ld.so assumes zero filled pages are icache clean)
* - Anton
*/
-
- /* avoid an atomic op if possible */
- if (test_bit(PG_arch_1, &pg->flags))
- clear_bit(PG_arch_1, &pg->flags);
+ flush_dcache_page(pg);
}
EXPORT_SYMBOL(clear_user_page);
@@ -469,12 +464,7 @@
return;
#endif
- if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
- return;
-
- /* avoid an atomic op if possible */
- if (test_bit(PG_arch_1, &pg->flags))
- clear_bit(PG_arch_1, &pg->flags);
+ flush_dcache_page(pg);
}
void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index 16031b5..3b998a3 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -2,7 +2,7 @@
obj-y += pervasive.o
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_SPU_FS) += spufs/ spu-base.o
+obj-$(CONFIG_SPU_FS) += spu-base.o spufs/
spu-base-y += spu_base.o spu_priv1.o
diff --git a/arch/powerpc/platforms/chrp/chrp.h b/arch/powerpc/platforms/chrp/chrp.h
index 3a2057f..814f547 100644
--- a/arch/powerpc/platforms/chrp/chrp.h
+++ b/arch/powerpc/platforms/chrp/chrp.h
@@ -5,7 +5,6 @@
extern void chrp_nvram_init(void);
extern void chrp_get_rtc_time(struct rtc_time *);
extern int chrp_set_rtc_time(struct rtc_time *);
-extern void chrp_calibrate_decr(void);
extern long chrp_time_init(void);
extern void chrp_find_bridges(void);
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 00c52f2..8ef279a 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -204,9 +204,11 @@
struct device_node *root = find_path_device("/");
struct device_node *rtas;
+ of_node_get(root);
rtas = of_find_node_by_name (root, "rtas");
if (rtas) {
hose->ops = &rtas_pci_ops;
+ of_node_put(rtas);
} else {
printk ("RTAS supporting Pegasos OF not found, please upgrade"
" your firmware\n");
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 2dc87aa..e1fadbf 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -506,7 +506,7 @@
ppc_md.halt = rtas_halt;
ppc_md.time_init = chrp_time_init;
- ppc_md.calibrate_decr = chrp_calibrate_decr;
+ ppc_md.calibrate_decr = generic_calibrate_decr;
/* this may get overridden with rtas routines later... */
ppc_md.set_rtc_time = chrp_set_rtc_time;
diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c
index 36a0f97..78df2e7 100644
--- a/arch/powerpc/platforms/chrp/time.c
+++ b/arch/powerpc/platforms/chrp/time.c
@@ -167,24 +167,3 @@
tm->tm_mon = mon;
tm->tm_year = year;
}
-
-
-void __init chrp_calibrate_decr(void)
-{
- struct device_node *cpu;
- unsigned int freq, *fp;
-
- /*
- * The cpu node should have a timebase-frequency property
- * to tell us the rate at which the decrementer counts.
- */
- freq = 16666000; /* hardcoded default */
- cpu = find_type_devices("cpu");
- if (cpu != 0) {
- fp = (unsigned int *)
- get_property(cpu, "timebase-frequency", NULL);
- if (fp != 0)
- freq = *fp;
- }
- ppc_tb_freq = freq;
-}
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index 535c802..87eb6bb 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -1052,8 +1052,7 @@
}
EXPORT_SYMBOL_GPL(pmac_i2c_adapter_to_bus);
-extern int pmac_i2c_match_adapter(struct device_node *dev,
- struct i2c_adapter *adapter)
+int pmac_i2c_match_adapter(struct device_node *dev, struct i2c_adapter *adapter)
{
struct pmac_i2c_bus *bus = pmac_i2c_find_bus(dev);
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index f671ed2..de3f30e 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -136,14 +136,14 @@
|(((unsigned int)(off)) & 0xFCUL) \
|1UL)
-static unsigned long macrisc_cfg_access(struct pci_controller* hose,
+static volatile void __iomem *macrisc_cfg_access(struct pci_controller* hose,
u8 bus, u8 dev_fn, u8 offset)
{
unsigned int caddr;
if (bus == hose->first_busno) {
if (dev_fn < (11 << 3))
- return 0;
+ return NULL;
caddr = MACRISC_CFA0(dev_fn, offset);
} else
caddr = MACRISC_CFA1(bus, dev_fn, offset);
@@ -154,14 +154,14 @@
} while (in_le32(hose->cfg_addr) != caddr);
offset &= has_uninorth ? 0x07 : 0x03;
- return ((unsigned long)hose->cfg_data) + offset;
+ return hose->cfg_data + offset;
}
static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose;
- unsigned long addr;
+ volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
@@ -177,13 +177,13 @@
*/
switch (len) {
case 1:
- *val = in_8((u8 *)addr);
+ *val = in_8(addr);
break;
case 2:
- *val = in_le16((u16 *)addr);
+ *val = in_le16(addr);
break;
default:
- *val = in_le32((u32 *)addr);
+ *val = in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
@@ -193,7 +193,7 @@
int offset, int len, u32 val)
{
struct pci_controller *hose;
- unsigned long addr;
+ volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
@@ -209,16 +209,16 @@
*/
switch (len) {
case 1:
- out_8((u8 *)addr, val);
- (void) in_8((u8 *)addr);
+ out_8(addr, val);
+ (void) in_8(addr);
break;
case 2:
- out_le16((u16 *)addr, val);
- (void) in_le16((u16 *)addr);
+ out_le16(addr, val);
+ (void) in_le16(addr);
break;
default:
- out_le32((u32 *)addr, val);
- (void) in_le32((u32 *)addr);
+ out_le32(addr, val);
+ (void) in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
@@ -348,25 +348,23 @@
+ (((unsigned int)bus) << 16) \
+ 0x01000000UL)
-static unsigned long u3_ht_cfg_access(struct pci_controller* hose,
+static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose,
u8 bus, u8 devfn, u8 offset)
{
if (bus == hose->first_busno) {
/* For now, we don't self probe U3 HT bridge */
if (PCI_SLOT(devfn) == 0)
- return 0;
- return ((unsigned long)hose->cfg_data) +
- U3_HT_CFA0(devfn, offset);
+ return NULL;
+ return hose->cfg_data + U3_HT_CFA0(devfn, offset);
} else
- return ((unsigned long)hose->cfg_data) +
- U3_HT_CFA1(bus, devfn, offset);
+ return hose->cfg_data + U3_HT_CFA1(bus, devfn, offset);
}
static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose;
- unsigned long addr;
+ volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
@@ -400,13 +398,13 @@
*/
switch (len) {
case 1:
- *val = in_8((u8 *)addr);
+ *val = in_8(addr);
break;
case 2:
- *val = in_le16((u16 *)addr);
+ *val = in_le16(addr);
break;
default:
- *val = in_le32((u32 *)addr);
+ *val = in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
@@ -416,7 +414,7 @@
int offset, int len, u32 val)
{
struct pci_controller *hose;
- unsigned long addr;
+ volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
@@ -442,16 +440,16 @@
*/
switch (len) {
case 1:
- out_8((u8 *)addr, val);
- (void) in_8((u8 *)addr);
+ out_8(addr, val);
+ (void) in_8(addr);
break;
case 2:
- out_le16((u16 *)addr, val);
- (void) in_le16((u16 *)addr);
+ out_le16(addr, val);
+ (void) in_le16(addr);
break;
default:
- out_le32((u32 *)addr, val);
- (void) in_le32((u32 *)addr);
+ out_le32((u32 __iomem *)addr, val);
+ (void) in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
@@ -476,7 +474,7 @@
|(((unsigned int)(off)) & 0xfcU) \
|1UL)
-static unsigned long u4_pcie_cfg_access(struct pci_controller* hose,
+static volatile void __iomem *u4_pcie_cfg_access(struct pci_controller* hose,
u8 bus, u8 dev_fn, int offset)
{
unsigned int caddr;
@@ -492,14 +490,14 @@
} while (in_le32(hose->cfg_addr) != caddr);
offset &= 0x03;
- return ((unsigned long)hose->cfg_data) + offset;
+ return hose->cfg_data + offset;
}
static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose;
- unsigned long addr;
+ volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
@@ -515,13 +513,13 @@
*/
switch (len) {
case 1:
- *val = in_8((u8 *)addr);
+ *val = in_8(addr);
break;
case 2:
- *val = in_le16((u16 *)addr);
+ *val = in_le16(addr);
break;
default:
- *val = in_le32((u32 *)addr);
+ *val = in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
@@ -531,7 +529,7 @@
int offset, int len, u32 val)
{
struct pci_controller *hose;
- unsigned long addr;
+ volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
@@ -547,16 +545,16 @@
*/
switch (len) {
case 1:
- out_8((u8 *)addr, val);
- (void) in_8((u8 *)addr);
+ out_8(addr, val);
+ (void) in_8(addr);
break;
case 2:
- out_le16((u16 *)addr, val);
- (void) in_le16((u16 *)addr);
+ out_le16(addr, val);
+ (void) in_le16(addr);
break;
default:
- out_le32((u32 *)addr, val);
- (void) in_le32((u32 *)addr);
+ out_le32(addr, val);
+ (void) in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
@@ -773,8 +771,7 @@
* the reg address cell, we shall fix that by killing struct
* reg_property and using some accessor functions instead
*/
- hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000,
- 0x02000000);
+ hose->cfg_data = ioremap(0xf2000000, 0x02000000);
/*
* /ht node doesn't expose a "ranges" property, so we "remove"
diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c
index c32c623..356a739 100644
--- a/arch/powerpc/platforms/powermac/pfunc_core.c
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -862,21 +862,28 @@
spin_unlock_irqrestore(&pmf_lock, flags);
return -ENODEV;
}
+ if (list_empty(&func->irq_clients))
+ func->dev->handlers->irq_enable(func);
list_add(&client->link, &func->irq_clients);
+ client->func = func;
spin_unlock_irqrestore(&pmf_lock, flags);
return 0;
}
EXPORT_SYMBOL_GPL(pmf_register_irq_client);
-void pmf_unregister_irq_client(struct device_node *np,
- const char *name,
- struct pmf_irq_client *client)
+void pmf_unregister_irq_client(struct pmf_irq_client *client)
{
+ struct pmf_function *func = client->func;
unsigned long flags;
+ BUG_ON(func == NULL);
+
spin_lock_irqsave(&pmf_lock, flags);
+ client->func = NULL;
list_del(&client->link);
+ if (list_empty(&func->irq_clients))
+ func->dev->handlers->irq_disable(func);
spin_unlock_irqrestore(&pmf_lock, flags);
}
EXPORT_SYMBOL_GPL(pmf_unregister_irq_client);
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 89c4c36..1955462 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -82,8 +82,6 @@
#undef SHOW_GATWICK_IRQS
-unsigned char drive_info;
-
int ppc_override_l2cr = 0;
int ppc_override_l2cr_value;
int has_l2cache = 0;
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 6373372..e3cbba4 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -333,7 +333,7 @@
rc = eeh_reset_device(frozen_pdn, NULL);
if (rc)
goto hard_fail;
- pci_walk_bus(frozen_bus, eeh_report_reset, 0);
+ pci_walk_bus(frozen_bus, eeh_report_reset, NULL);
}
/* If all devices reported they can proceed, the re-enable PIO */
@@ -342,11 +342,11 @@
rc = eeh_reset_device(frozen_pdn, NULL);
if (rc)
goto hard_fail;
- pci_walk_bus(frozen_bus, eeh_report_reset, 0);
+ pci_walk_bus(frozen_bus, eeh_report_reset, NULL);
}
/* Tell all device drivers that they can resume operations */
- pci_walk_bus(frozen_bus, eeh_report_resume, 0);
+ pci_walk_bus(frozen_bus, eeh_report_resume, NULL);
return;
@@ -367,7 +367,7 @@
eeh_slot_error_detail(frozen_pdn, 2 /* Permanent Error */);
/* Notify all devices that they're about to go down. */
- pci_walk_bus(frozen_bus, eeh_report_failure, 0);
+ pci_walk_bus(frozen_bus, eeh_report_failure, NULL);
/* Shut down the device drivers for good. */
pcibios_remove_pci_devices(frozen_bus);
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 2193478..bdaa8aa 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -58,6 +58,7 @@
return find_bus_among_children(pdn->phb->bus, dn);
}
+EXPORT_SYMBOL_GPL(pcibios_find_pci_bus);
/**
* pcibios_remove_pci_devices - remove all devices under this bus
@@ -106,6 +107,7 @@
}
}
}
+EXPORT_SYMBOL_GPL(pcibios_fixup_new_pci_devices);
static int
pcibios_pci_config_bridge(struct pci_dev *dev)
@@ -172,3 +174,4 @@
pcibios_pci_config_bridge(dev);
}
}
+EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index da6ceba..9edeca8 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -585,7 +585,7 @@
static void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
{
/* Don't risk a hypervisor call if we're crashing */
- if (!crash_shutdown) {
+ if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) {
unsigned long vpa = __pa(get_lppaca());
if (unregister_vpa(hard_smp_processor_id(), vpa)) {
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 977de9d..6298264 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -59,7 +59,7 @@
static u32 *dart_vbase;
/* Mapped base address for the dart */
-static unsigned int *__iomem dart;
+static unsigned int __iomem *dart;
/* Dummy val that entries are set to when unused */
static unsigned int dart_emptyval;
diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S
index 3e6ca7f..c1e89ad 100644
--- a/arch/ppc/kernel/head_8xx.S
+++ b/arch/ppc/kernel/head_8xx.S
@@ -810,13 +810,16 @@
mtspr SPRN_MD_TWC, r9
li r11, MI_BOOTINIT /* Create RPN for address 0 */
addis r11, r11, 0x0080 /* Add 8M */
- mtspr SPRN_MD_RPN, r8
+ mtspr SPRN_MD_RPN, r11
+
+ addi r10, r10, 0x0100
+ mtspr SPRN_MD_CTR, r10
addis r8, r8, 0x0080 /* Add 8M */
mtspr SPRN_MD_EPN, r8
mtspr SPRN_MD_TWC, r9
addis r11, r11, 0x0080 /* Add 8M */
- mtspr SPRN_MD_RPN, r8
+ mtspr SPRN_MD_RPN, r11
#endif
/* Since the cache is enabled according to the information we
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 3a6e4bc..15bd9b4 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -186,11 +186,15 @@
EXPORT_SYMBOL(flush_tlb_page);
EXPORT_SYMBOL(_tlbie);
#ifdef CONFIG_ALTIVEC
+#ifndef CONFIG_SMP
EXPORT_SYMBOL(last_task_used_altivec);
+#endif
EXPORT_SYMBOL(giveup_altivec);
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_SPE
+#ifndef CONFIG_SMP
EXPORT_SYMBOL(last_task_used_spe);
+#endif
EXPORT_SYMBOL(giveup_spe);
#endif /* CONFIG_SPE */
#ifdef CONFIG_SMP
diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
index 159b228..0ec53f0 100644
--- a/arch/ppc/platforms/4xx/bamboo.c
+++ b/arch/ppc/platforms/4xx/bamboo.c
@@ -332,8 +332,8 @@
port.irq = 0;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
index 8110f55..ce48a4f 100644
--- a/arch/ppc/platforms/4xx/bubinga.c
+++ b/arch/ppc/platforms/4xx/bubinga.c
@@ -97,8 +97,8 @@
port.irq = ACTING_UART0_INT;
port.uartclk = uart_clock;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
index 64ebae1..9a828b6 100644
--- a/arch/ppc/platforms/4xx/ebony.c
+++ b/arch/ppc/platforms/4xx/ebony.c
@@ -225,8 +225,8 @@
port.irq = 0;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
index d810b73..21d2913 100644
--- a/arch/ppc/platforms/4xx/luan.c
+++ b/arch/ppc/platforms/4xx/luan.c
@@ -279,8 +279,8 @@
port.irq = UART0_INT;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
index 73b2c98..4f355b6 100644
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -248,8 +248,8 @@
port.irq = UART0_INT;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c
index 0b1b77d..e90d97f 100644
--- a/arch/ppc/platforms/4xx/xilinx_ml300.c
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.c
@@ -95,8 +95,8 @@
port.irq = old_ports[i].irq;
port.uartclk = old_ports[i].baud_base * 16;
port.regshift = old_ports[i].iomem_reg_shift;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = i;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
index e60f4bd..b065b8b 100644
--- a/arch/ppc/platforms/4xx/yucca.c
+++ b/arch/ppc/platforms/4xx/yucca.c
@@ -305,8 +305,8 @@
port.irq = UART0_INT;
port.uartclk = clocks.uart0;
port.regshift = 0;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c
index 012e1e6..1a659bb 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.c
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.c
@@ -301,14 +301,14 @@
struct uart_port p;
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4500);
p.uartclk = binfo->bi_busfreq;
gen550_init(0, &p);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4600);
p.uartclk = binfo->bi_busfreq;
diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c
index 2eceb1e..408d64f 100644
--- a/arch/ppc/platforms/85xx/mpc8540_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8540_ads.c
@@ -162,14 +162,14 @@
binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
p.uartclk = binfo->bi_busfreq;
gen550_init(0, &p);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
p.uartclk = binfo->bi_busfreq;
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
index b332eba..1801ab3 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
@@ -534,14 +534,14 @@
binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
p.uartclk = binfo->bi_busfreq;
gen550_init(0, &p);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
p.uartclk = binfo->bi_busfreq;
diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c
index e777ba8..8a72221 100644
--- a/arch/ppc/platforms/85xx/sbc8560.c
+++ b/arch/ppc/platforms/85xx/sbc8560.c
@@ -64,7 +64,7 @@
uart_req.irq = MPC85xx_IRQ_EXT9;
uart_req.flags = STD_COM_FLAGS;
uart_req.uartclk = BASE_BAUD * 16;
- uart_req.iotype = SERIAL_IO_MEM;
+ uart_req.iotype = UPIO_MEM;
uart_req.mapbase = UARTA_ADDR;
uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART0_SIZE);
uart_req.type = PORT_16650;
diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c
index b436f4d..a5e38ba 100644
--- a/arch/ppc/platforms/85xx/tqm85xx.c
+++ b/arch/ppc/platforms/85xx/tqm85xx.c
@@ -346,14 +346,14 @@
binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
p.uartclk = binfo->bi_busfreq;
gen550_init(0, &p);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
p.uartclk = binfo->bi_busfreq;
diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c
index 48a4a51..aefcc0e 100644
--- a/arch/ppc/platforms/chestnut.c
+++ b/arch/ppc/platforms/chestnut.c
@@ -116,7 +116,7 @@
port.uartclk = BASE_BAUD * 16;
port.irq = UART0_INT;
port.flags = STD_COM_FLAGS | UPF_IOREMAP;
- port.iotype = SERIAL_IO_MEM;
+ port.iotype = UPIO_MEM;
port.mapbase = CHESTNUT_UART0_IO_BASE;
port.regshift = 0;
diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c
index 32358b3..ffde8f6 100644
--- a/arch/ppc/platforms/ev64260.c
+++ b/arch/ppc/platforms/ev64260.c
@@ -330,7 +330,7 @@
port.irq = EV64260_UART_0_IRQ;
port.uartclk = BASE_BAUD * 16;
port.regshift = 2;
- port.iotype = SERIAL_IO_MEM;
+ port.iotype = UPIO_MEM;
port.flags = STD_COM_FLAGS;
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c
index 708b873..872c0a3 100644
--- a/arch/ppc/platforms/radstone_ppc7d.c
+++ b/arch/ppc/platforms/radstone_ppc7d.c
@@ -100,7 +100,7 @@
serial_req.uartclk = UART_CLK;
serial_req.irq = 4;
serial_req.flags = STD_COM_FLAGS;
- serial_req.iotype = SERIAL_IO_MEM;
+ serial_req.iotype = UPIO_MEM;
serial_req.membase = (u_char *) PPC7D_SERIAL_0;
gen550_init(0, &serial_req);
diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c
index 5ad70d3..69e1de7 100644
--- a/arch/ppc/platforms/spruce.c
+++ b/arch/ppc/platforms/spruce.c
@@ -176,8 +176,8 @@
memset(&serial_req, 0, sizeof(serial_req));
serial_req.uartclk = uart_clk;
serial_req.irq = UART0_INT;
- serial_req.flags = ASYNC_BOOT_AUTOCONF;
- serial_req.iotype = SERIAL_IO_MEM;
+ serial_req.flags = UPF_BOOT_AUTOCONF;
+ serial_req.iotype = UPIO_MEM;
serial_req.membase = (u_char *)UART0_IO_BASE;
serial_req.regshift = 0;
diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c
index 94ea346..1f01b7e 100644
--- a/arch/ppc/syslib/mv64x60.c
+++ b/arch/ppc/syslib/mv64x60.c
@@ -313,7 +313,7 @@
};
#endif
-#ifdef CONFIG_MV643XX_ETH
+#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
static struct resource mv64x60_eth_shared_resources[] = {
[0] = {
.name = "ethernet shared base",
@@ -456,7 +456,7 @@
&mpsc0_device,
&mpsc1_device,
#endif
-#ifdef CONFIG_MV643XX_ETH
+#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
&mv64x60_eth_shared_device,
#endif
#ifdef CONFIG_MV643XX_ETH_0
diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c
index ab34b1d..2fe28de 100644
--- a/arch/ppc/syslib/ocp.c
+++ b/arch/ppc/syslib/ocp.c
@@ -189,8 +189,8 @@
struct bus_type ocp_bus_type = {
.name = "ocp",
.match = ocp_device_match,
- .probe = ocp_driver_probe,
- .remove = ocp_driver_remove,
+ .probe = ocp_device_probe,
+ .remove = ocp_device_remove,
.suspend = ocp_device_suspend,
.resume = ocp_device_resume,
};
diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c
index 1b5fe9e..7bada82 100644
--- a/arch/ppc/syslib/ppc83xx_setup.c
+++ b/arch/ppc/syslib/ppc83xx_setup.c
@@ -108,7 +108,7 @@
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
memset(&serial_req, 0, sizeof (serial_req));
- serial_req.iotype = SERIAL_IO_MEM;
+ serial_req.iotype = UPIO_MEM;
serial_req.mapbase = pdata[0].mapbase;
serial_req.membase = pdata[0].membase;
serial_req.regshift = 0;
diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
index 1a47ff4..e4dda43 100644
--- a/arch/ppc/syslib/ppc85xx_setup.c
+++ b/arch/ppc/syslib/ppc85xx_setup.c
@@ -90,7 +90,7 @@
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
memset(&serial_req, 0, sizeof (serial_req));
- serial_req.iotype = SERIAL_IO_MEM;
+ serial_req.iotype = UPIO_MEM;
serial_req.mapbase = pdata[0].mapbase;
serial_req.membase = pdata[0].membase;
serial_req.regshift = 0;
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 7d23edc..3525c91 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,13 +1,12 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Mon Nov 21 13:51:30 2005
+# Linux kernel version: 2.6.16-rc1
+# Thu Jan 19 10:58:53 2006
#
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_S390=y
-CONFIG_UID16=y
#
# Code maturity level options
@@ -29,18 +28,20 @@
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -49,8 +50,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -76,11 +79,11 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="deadline"
#
# Base setup
@@ -193,6 +196,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -362,6 +370,7 @@
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=2048
+# CONFIG_HANGCHECK_TIMER is not set
#
# Watchdog Cards
@@ -488,6 +497,7 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -520,6 +530,7 @@
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -584,6 +595,7 @@
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -592,7 +604,7 @@
# CONFIG_NLS is not set
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
@@ -600,19 +612,21 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
#
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index bf9a7a3..cc20f0e 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -100,12 +100,12 @@
#define SET_STAT_UID(stat, uid) (stat).st_uid = high2lowuid(uid)
#define SET_STAT_GID(stat, gid) (stat).st_gid = high2lowgid(gid)
-asmlinkage long sys32_chown16(const char * filename, u16 user, u16 group)
+asmlinkage long sys32_chown16(const char __user * filename, u16 user, u16 group)
{
return sys_chown(filename, low2highuid(user), low2highgid(group));
}
-asmlinkage long sys32_lchown16(const char * filename, u16 user, u16 group)
+asmlinkage long sys32_lchown16(const char __user * filename, u16 user, u16 group)
{
return sys_lchown(filename, low2highuid(user), low2highgid(group));
}
@@ -141,7 +141,7 @@
low2highuid(suid));
}
-asmlinkage long sys32_getresuid16(u16 *ruid, u16 *euid, u16 *suid)
+asmlinkage long sys32_getresuid16(u16 __user *ruid, u16 __user *euid, u16 __user *suid)
{
int retval;
@@ -158,7 +158,7 @@
low2highgid(sgid));
}
-asmlinkage long sys32_getresgid16(u16 *rgid, u16 *egid, u16 *sgid)
+asmlinkage long sys32_getresgid16(u16 __user *rgid, u16 __user *egid, u16 __user *sgid)
{
int retval;
@@ -179,7 +179,7 @@
return sys_setfsgid((gid_t)gid);
}
-static int groups16_to_user(u16 *grouplist, struct group_info *group_info)
+static int groups16_to_user(u16 __user *grouplist, struct group_info *group_info)
{
int i;
u16 group;
@@ -193,7 +193,7 @@
return 0;
}
-static int groups16_from_user(struct group_info *group_info, u16 *grouplist)
+static int groups16_from_user(struct group_info *group_info, u16 __user *grouplist)
{
int i;
u16 group;
@@ -207,7 +207,7 @@
return 0;
}
-asmlinkage long sys32_getgroups16(int gidsetsize, u16 *grouplist)
+asmlinkage long sys32_getgroups16(int gidsetsize, u16 __user *grouplist)
{
int i;
@@ -231,7 +231,7 @@
return i;
}
-asmlinkage long sys32_setgroups16(int gidsetsize, u16 *grouplist)
+asmlinkage long sys32_setgroups16(int gidsetsize, u16 __user *grouplist)
{
struct group_info *group_info;
int retval;
@@ -278,14 +278,14 @@
/* 32-bit timeval and related flotsam. */
-static inline long get_tv32(struct timeval *o, struct compat_timeval *i)
+static inline long get_tv32(struct timeval *o, struct compat_timeval __user *i)
{
return (!access_ok(VERIFY_READ, o, sizeof(*o)) ||
(__get_user(o->tv_sec, &i->tv_sec) ||
__get_user(o->tv_usec, &i->tv_usec)));
}
-static inline long put_tv32(struct compat_timeval *o, struct timeval *i)
+static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i)
{
return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
(__put_user(i->tv_sec, &o->tv_sec) ||
@@ -341,7 +341,7 @@
return -ENOSYS;
}
-asmlinkage long sys32_truncate64(const char * path, unsigned long high, unsigned long low)
+asmlinkage long sys32_truncate64(const char __user * path, unsigned long high, unsigned long low)
{
if ((int)high < 0)
return -EINVAL;
@@ -357,7 +357,7 @@
return sys_ftruncate(fd, (high << 32) | low);
}
-int cp_compat_stat(struct kstat *stat, struct compat_stat *statbuf)
+int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
{
int err;
@@ -591,7 +591,7 @@
extern struct timezone sys_tz;
-asmlinkage long sys32_gettimeofday(struct compat_timeval *tv, struct timezone *tz)
+asmlinkage long sys32_gettimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
{
if (tv) {
struct timeval ktv;
@@ -606,7 +606,7 @@
return 0;
}
-static inline long get_ts32(struct timespec *o, struct compat_timeval *i)
+static inline long get_ts32(struct timespec *o, struct compat_timeval __user *i)
{
long usec;
@@ -620,7 +620,7 @@
return 0;
}
-asmlinkage long sys32_settimeofday(struct compat_timeval *tv, struct timezone *tz)
+asmlinkage long sys32_settimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
{
struct timespec kts;
struct timezone ktz;
@@ -645,7 +645,7 @@
return -ERESTARTNOHAND;
}
-asmlinkage long sys32_pread64(unsigned int fd, char *ubuf,
+asmlinkage long sys32_pread64(unsigned int fd, char __user *ubuf,
size_t count, u32 poshi, u32 poslo)
{
if ((compat_ssize_t) count < 0)
@@ -653,7 +653,7 @@
return sys_pread64(fd, ubuf, count, ((loff_t)AA(poshi) << 32) | AA(poslo));
}
-asmlinkage long sys32_pwrite64(unsigned int fd, const char *ubuf,
+asmlinkage long sys32_pwrite64(unsigned int fd, const char __user *ubuf,
size_t count, u32 poshi, u32 poslo)
{
if ((compat_ssize_t) count < 0)
@@ -666,7 +666,7 @@
return sys_readahead(fd, ((loff_t)AA(offhi) << 32) | AA(offlo), count);
}
-asmlinkage long sys32_sendfile(int out_fd, int in_fd, compat_off_t *offset, size_t count)
+asmlinkage long sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, size_t count)
{
mm_segment_t old_fs = get_fs();
int ret;
@@ -686,7 +686,7 @@
}
asmlinkage long sys32_sendfile64(int out_fd, int in_fd,
- compat_loff_t *offset, s32 count)
+ compat_loff_t __user *offset, s32 count)
{
mm_segment_t old_fs = get_fs();
int ret;
@@ -722,7 +722,7 @@
extern int do_adjtimex(struct timex *);
-asmlinkage long sys32_adjtimex(struct timex32 *utp)
+asmlinkage long sys32_adjtimex(struct timex32 __user *utp)
{
struct timex txc;
int ret;
@@ -789,12 +789,13 @@
u32 __unused[4];
};
-asmlinkage long sys32_sysctl(struct __sysctl_args32 *args)
+asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args)
{
struct __sysctl_args32 tmp;
int error;
- size_t oldlen, *oldlenp = NULL;
- unsigned long addr = (((long)&args->__unused[0]) + 7) & ~7;
+ size_t oldlen;
+ size_t __user *oldlenp = NULL;
+ unsigned long addr = (((unsigned long)&args->__unused[0]) + 7) & ~7;
if (copy_from_user(&tmp, args, sizeof(tmp)))
return -EFAULT;
@@ -806,20 +807,20 @@
basically copy the whole sysctl.c here, and
glibc's __sysctl uses rw memory for the structure
anyway. */
- if (get_user(oldlen, (u32 *)A(tmp.oldlenp)) ||
- put_user(oldlen, (size_t *)addr))
+ if (get_user(oldlen, (u32 __user *)compat_ptr(tmp.oldlenp)) ||
+ put_user(oldlen, (size_t __user *)addr))
return -EFAULT;
- oldlenp = (size_t *)addr;
+ oldlenp = (size_t __user *)addr;
}
lock_kernel();
- error = do_sysctl((int *)A(tmp.name), tmp.nlen, (void *)A(tmp.oldval),
- oldlenp, (void *)A(tmp.newval), tmp.newlen);
+ error = do_sysctl(compat_ptr(tmp.name), tmp.nlen, compat_ptr(tmp.oldval),
+ oldlenp, compat_ptr(tmp.newval), tmp.newlen);
unlock_kernel();
if (oldlenp) {
if (!error) {
- if (get_user(oldlen, (size_t *)addr) ||
- put_user(oldlen, (u32 *)A(tmp.oldlenp)))
+ if (get_user(oldlen, (size_t __user *)addr) ||
+ put_user(oldlen, (u32 __user *)compat_ptr(tmp.oldlenp)))
error = -EFAULT;
}
copy_to_user(args->__unused, tmp.__unused, sizeof(tmp.__unused));
@@ -853,7 +854,7 @@
unsigned long st_ino;
};
-static int cp_stat64(struct stat64_emu31 *ubuf, struct kstat *stat)
+static int cp_stat64(struct stat64_emu31 __user *ubuf, struct kstat *stat)
{
struct stat64_emu31 tmp;
@@ -877,7 +878,7 @@
return copy_to_user(ubuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
}
-asmlinkage long sys32_stat64(char * filename, struct stat64_emu31 * statbuf)
+asmlinkage long sys32_stat64(char __user * filename, struct stat64_emu31 __user * statbuf)
{
struct kstat stat;
int ret = vfs_stat(filename, &stat);
@@ -886,7 +887,7 @@
return ret;
}
-asmlinkage long sys32_lstat64(char * filename, struct stat64_emu31 * statbuf)
+asmlinkage long sys32_lstat64(char __user * filename, struct stat64_emu31 __user * statbuf)
{
struct kstat stat;
int ret = vfs_lstat(filename, &stat);
@@ -895,7 +896,7 @@
return ret;
}
-asmlinkage long sys32_fstat64(unsigned long fd, struct stat64_emu31 * statbuf)
+asmlinkage long sys32_fstat64(unsigned long fd, struct stat64_emu31 __user * statbuf)
{
struct kstat stat;
int ret = vfs_fstat(fd, &stat);
@@ -952,7 +953,7 @@
asmlinkage unsigned long
-old32_mmap(struct mmap_arg_struct_emu31 *arg)
+old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
{
struct mmap_arg_struct_emu31 a;
int error = -EFAULT;
@@ -970,7 +971,7 @@
}
asmlinkage long
-sys32_mmap2(struct mmap_arg_struct_emu31 *arg)
+sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
{
struct mmap_arg_struct_emu31 a;
int error = -EFAULT;
@@ -982,7 +983,7 @@
return error;
}
-asmlinkage long sys32_read(unsigned int fd, char * buf, size_t count)
+asmlinkage long sys32_read(unsigned int fd, char __user * buf, size_t count)
{
if ((compat_ssize_t) count < 0)
return -EINVAL;
@@ -990,7 +991,7 @@
return sys_read(fd, buf, count);
}
-asmlinkage long sys32_write(unsigned int fd, char * buf, size_t count)
+asmlinkage long sys32_write(unsigned int fd, char __user * buf, size_t count)
{
if ((compat_ssize_t) count < 0)
return -EINVAL;
@@ -1002,12 +1003,12 @@
{
unsigned long clone_flags;
unsigned long newsp;
- int *parent_tidptr, *child_tidptr;
+ int __user *parent_tidptr, *child_tidptr;
clone_flags = regs.gprs[3] & 0xffffffffUL;
newsp = regs.orig_gpr2 & 0x7fffffffUL;
- parent_tidptr = (int *) (regs.gprs[4] & 0x7fffffffUL);
- child_tidptr = (int *) (regs.gprs[5] & 0x7fffffffUL);
+ parent_tidptr = compat_ptr(regs.gprs[4]);
+ child_tidptr = compat_ptr(regs.gprs[5]);
if (!newsp)
newsp = regs.gprs[15];
return do_fork(clone_flags, newsp, ®s, 0,
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index fa2b3bc..ef70669 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -1,8 +1,7 @@
/*
- * arch/s390/kernel/signal32.c
+ * arch/s390/kernel/compat_signal.c
*
- * S390 version
- * Copyright (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) IBM Corp. 2000,2006
* Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
* Gerhard Tonn (ton@de.ibm.com)
*
@@ -52,8 +51,6 @@
struct ucontext32 uc;
} rt_sigframe32;
-asmlinkage int FASTCALL(do_signal(struct pt_regs *regs, sigset_t *oldset));
-
int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
{
int err;
@@ -161,66 +158,6 @@
return err;
}
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys32_sigsuspend(struct pt_regs * regs,int history0, int history1, old_sigset_t mask)
-{
- sigset_t saveset;
-
- mask &= _BLOCKABLE;
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- siginitset(¤t->blocked, mask);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
- regs->gprs[2] = -EINTR;
-
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule();
- if (do_signal(regs, &saveset))
- return -EINTR;
- }
-}
-
-asmlinkage int
-sys32_rt_sigsuspend(struct pt_regs * regs, compat_sigset_t __user *unewset,
- size_t sigsetsize)
-{
- sigset_t saveset, newset;
- compat_sigset_t set32;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&set32, unewset, sizeof(set32)))
- return -EFAULT;
- switch (_NSIG_WORDS) {
- case 4: newset.sig[3] = set32.sig[6] + (((long)set32.sig[7]) << 32);
- case 3: newset.sig[2] = set32.sig[4] + (((long)set32.sig[5]) << 32);
- case 2: newset.sig[1] = set32.sig[2] + (((long)set32.sig[3]) << 32);
- case 1: newset.sig[0] = set32.sig[0] + (((long)set32.sig[1]) << 32);
- }
- sigdelsetmask(&newset, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
- regs->gprs[2] = -EINTR;
-
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule();
- if (do_signal(regs, &saveset))
- return -EINTR;
- }
-}
-
asmlinkage long
sys32_sigaction(int sig, const struct old_sigaction32 __user *act,
struct old_sigaction32 __user *oact)
@@ -520,7 +457,7 @@
return sig;
}
-static void setup_frame32(int sig, struct k_sigaction *ka,
+static int setup_frame32(int sig, struct k_sigaction *ka,
sigset_t *set, struct pt_regs * regs)
{
sigframe32 __user *frame = get_sigframe(ka, regs, sizeof(sigframe32));
@@ -565,13 +502,14 @@
/* Place signal number on stack to allow backtrace from handler. */
if (__put_user(regs->gprs[2], (int __user *) &frame->signo))
goto give_sigsegv;
- return;
+ return 0;
give_sigsegv:
force_sigsegv(sig, current);
+ return -EFAULT;
}
-static void setup_rt_frame32(int sig, struct k_sigaction *ka, siginfo_t *info,
+static int setup_rt_frame32(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs * regs)
{
int err = 0;
@@ -615,31 +553,37 @@
regs->gprs[2] = map_signal(sig);
regs->gprs[3] = (__u64) &frame->info;
regs->gprs[4] = (__u64) &frame->uc;
- return;
+ return 0;
give_sigsegv:
force_sigsegv(sig, current);
+ return -EFAULT;
}
/*
* OK, we're invoking a handler
*/
-void
+int
handle_signal32(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
{
+ int ret;
+
/* Set up the stack frame */
if (ka->sa.sa_flags & SA_SIGINFO)
- setup_rt_frame32(sig, ka, info, oldset, regs);
+ ret = setup_rt_frame32(sig, ka, info, oldset, regs);
else
- setup_frame32(sig, ka, oldset, regs);
+ ret = setup_frame32(sig, ka, oldset, regs);
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
- if (!(ka->sa.sa_flags & SA_NODEFER))
- sigaddset(¤t->blocked,sig);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ if (ret == 0) {
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(¤t->blocked,sig);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+ }
+ return ret;
}
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index cfde190..83b33fe 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1,9 +1,8 @@
/*
-* arch/s390/kernel/sys_wrapper31.S
+* arch/s390/kernel/compat_wrapper.S
* wrapper for 31 bit compatible system calls.
*
-* S390 version
-* Copyright (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+* Copyright (C) IBM Corp. 2000,2006
* Author(s): Gerhard Tonn (ton@de.ibm.com),
* Thomas Spatzier (tspat@de.ibm.com)
*/
@@ -288,7 +287,12 @@
llgfr %r3,%r3 # __kernel_old_gid_emu31_t
jg sys32_setregid16 # branch to system call
-#sys32_sigsuspend_wrapper # done in sigsuspend_glue
+ .globl sys_sigsuspend_wrapper
+sys_sigsuspend_wrapper:
+ lgfr %r2,%r2 # int
+ lgfr %r3,%r3 # int
+ llgfr %r4,%r4 # old_sigset_t
+ jg sys_sigsuspend
.globl compat_sys_sigpending_wrapper
compat_sys_sigpending_wrapper:
@@ -855,7 +859,11 @@
llgtr %r4,%r4 # siginfo_emu31_t *
jg sys32_rt_sigqueueinfo # branch to system call
-#sys32_rt_sigsuspend_wrapper # done in rt_sigsuspend_glue
+ .globl compat_sys_rt_sigsuspend_wrapper
+compat_sys_rt_sigsuspend_wrapper:
+ llgtr %r2,%r2 # compat_sigset_t *
+ llgfr %r3,%r3 # compat_size_t
+ jg compat_sys_rt_sigsuspend
.globl sys32_pread64_wrapper
sys32_pread64_wrapper:
@@ -1475,3 +1483,122 @@
lgfr %r2,%r2 # int
llgfr %r3,%r3 # u32
jg sys_inotify_rm_watch
+
+ .globl compat_sys_openat_wrapper
+compat_sys_openat_wrapper:
+ llgfr %r2,%r2 # unsigned int
+ llgtr %r3,%r3 # const char *
+ lgfr %r4,%r4 # int
+ lgfr %r5,%r5 # int
+ jg compat_sys_openat
+
+ .globl sys_mkdirat_wrapper
+sys_mkdirat_wrapper:
+ lgfr %r2,%r2 # int
+ llgtr %r3,%r3 # const char *
+ lgfr %r4,%r4 # int
+ jg sys_mkdirat
+
+ .globl sys_mknodat_wrapper
+sys_mknodat_wrapper:
+ lgfr %r2,%r2 # int
+ llgtr %r3,%r3 # const char *
+ lgfr %r4,%r4 # int
+ llgfr %r5,%r5 # unsigned int
+ jg sys_mknodat
+
+ .globl sys_fchownat_wrapper
+sys_fchownat_wrapper:
+ lgfr %r2,%r2 # int
+ llgtr %r3,%r3 # const char *
+ llgfr %r4,%r4 # uid_t
+ llgfr %r5,%r5 # gid_t
+ lgfr %r6,%r6 # int
+ jg sys_fchownat
+
+ .globl compat_sys_futimesat_wrapper
+compat_sys_futimesat_wrapper:
+ llgfr %r2,%r2 # unsigned int
+ llgtr %r3,%r3 # char *
+ llgtr %r4,%r4 # struct timeval *
+ jg compat_sys_futimesat
+
+ .globl compat_sys_newfstatat_wrapper
+compat_sys_newfstatat_wrapper:
+ llgfr %r2,%r2 # unsigned int
+ llgtr %r3,%r3 # char *
+ llgtr %r4,%r4 # struct stat *
+ lgfr %r5,%r5 # int
+ jg compat_sys_newfstatat
+
+ .globl sys_unlinkat_wrapper
+sys_unlinkat_wrapper:
+ lgfr %r2,%r2 # int
+ llgtr %r3,%r3 # const char *
+ lgfr %r4,%r4 # int
+ jg sys_unlinkat
+
+ .globl sys_renameat_wrapper
+sys_renameat_wrapper:
+ lgfr %r2,%r2 # int
+ llgtr %r3,%r3 # const char *
+ lgfr %r4,%r4 # int
+ llgtr %r5,%r5 # const char *
+ jg sys_renameat
+
+ .globl sys_linkat_wrapper
+sys_linkat_wrapper:
+ lgfr %r2,%r2 # int
+ llgtr %r3,%r3 # const char *
+ lgfr %r4,%r4 # int
+ llgtr %r5,%r5 # const char *
+ jg sys_linkat
+
+ .globl sys_symlinkat_wrapper
+sys_symlinkat_wrapper:
+ llgtr %r2,%r2 # const char *
+ lgfr %r3,%r3 # int
+ llgtr %r4,%r4 # const char *
+ jg sys_symlinkat
+
+ .globl sys_readlinkat_wrapper
+sys_readlinkat_wrapper:
+ lgfr %r2,%r2 # int
+ llgtr %r3,%r3 # const char *
+ llgtr %r4,%r4 # char *
+ lgfr %r5,%r5 # int
+ jg sys_readlinkat
+
+ .globl sys_fchmodat_wrapper
+sys_fchmodat_wrapper:
+ lgfr %r2,%r2 # int
+ llgtr %r3,%r3 # const char *
+ llgfr %r4,%r4 # mode_t
+ jg sys_fchmodat
+
+ .globl sys_faccessat_wrapper
+sys_faccessat_wrapper:
+ lgfr %r2,%r2 # int
+ llgtr %r3,%r3 # const char *
+ lgfr %r4,%r4 # int
+ jg sys_faccessat
+
+ .globl compat_sys_pselect6_wrapper
+compat_sys_pselect6_wrapper:
+ lgfr %r2,%r2 # int
+ llgtr %r3,%r3 # fd_set *
+ llgtr %r4,%r4 # fd_set *
+ llgtr %r5,%r5 # fd_set *
+ llgtr %r6,%r6 # struct timespec *
+ llgt %r0,164(%r15) # void *
+ stg %r0,160(%r15)
+ jg compat_sys_pselect6
+
+ .globl compat_sys_ppoll_wrapper
+compat_sys_ppoll_wrapper:
+ llgtr %r2,%r2 # struct pollfd *
+ llgfr %r3,%r3 # unsigned int
+ llgtr %r4,%r4 # struct timespec *
+ llgtr %r5,%r5 # const sigset_t *
+ llgfr %r6,%r6 # size_t
+ jg compat_sys_ppoll
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 27b0773..b244848 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -2,8 +2,7 @@
* arch/s390/kernel/entry.S
* S390 low-level entry points.
*
- * S390 version
- * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) IBM Corp. 1999,2006
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
* Hartmut Penner (hp@de.ibm.com),
* Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
@@ -50,9 +49,10 @@
SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
-_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING | \
- _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
-_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING)
+_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \
+ _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
+_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \
+ _TIF_MCCK_PENDING)
STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
STACK_SIZE = 1 << STACK_SHIFT
@@ -251,8 +251,8 @@
bo BASED(sysc_mcck_pending)
tm __TI_flags+3(%r9),_TIF_NEED_RESCHED
bo BASED(sysc_reschedule)
- tm __TI_flags+3(%r9),_TIF_SIGPENDING
- bo BASED(sysc_sigpending)
+ tm __TI_flags+3(%r9),(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)
+ bnz BASED(sysc_sigpending)
tm __TI_flags+3(%r9),_TIF_RESTART_SVC
bo BASED(sysc_restart)
tm __TI_flags+3(%r9),_TIF_SINGLE_STEP
@@ -276,12 +276,11 @@
br %r1 # TIF bit will be cleared by handler
#
-# _TIF_SIGPENDING is set, call do_signal
+# _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal
#
sysc_sigpending:
ni __TI_flags+3(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
la %r2,SP_PTREGS(%r15) # load pt_regs
- sr %r3,%r3 # clear *oldset
l %r1,BASED(.Ldo_signal)
basr %r14,%r1 # call do_signal
tm __TI_flags+3(%r9),_TIF_RESTART_SVC
@@ -397,30 +396,6 @@
l %r1,BASED(.Lrt_sigreturn)
br %r1 # branch to sys_sigreturn
-#
-# sigsuspend and rt_sigsuspend need pt_regs as an additional
-# parameter and they have to skip the store of %r2 into the
-# user register %r2 because the return value was set in
-# sigsuspend and rt_sigsuspend already and must not be overwritten!
-#
-
-sys_sigsuspend_glue:
- lr %r5,%r4 # move mask back
- lr %r4,%r3 # move history1 parameter
- lr %r3,%r2 # move history0 parameter
- la %r2,SP_PTREGS(%r15) # load pt_regs as first parameter
- l %r1,BASED(.Lsigsuspend)
- la %r14,4(%r14) # skip store of return value
- br %r1 # branch to sys_sigsuspend
-
-sys_rt_sigsuspend_glue:
- lr %r4,%r3 # move sigsetsize parameter
- lr %r3,%r2 # move unewset parameter
- la %r2,SP_PTREGS(%r15) # load pt_regs as first parameter
- l %r1,BASED(.Lrt_sigsuspend)
- la %r14,4(%r14) # skip store of return value
- br %r1 # branch to sys_rt_sigsuspend
-
sys_sigaltstack_glue:
la %r4,SP_PTREGS(%r15) # load pt_regs as parameter
l %r1,BASED(.Lsigaltstack)
@@ -604,15 +579,16 @@
lr %r15,%r1
#
# One of the work bits is on. Find out which one.
-# Checked are: _TIF_SIGPENDING, _TIF_NEED_RESCHED and _TIF_MCCK_PENDING
+# Checked are: _TIF_SIGPENDING, _TIF_RESTORE_SIGMASK, _TIF_NEED_RESCHED
+# and _TIF_MCCK_PENDING
#
io_work_loop:
tm __TI_flags+3(%r9),_TIF_MCCK_PENDING
bo BASED(io_mcck_pending)
tm __TI_flags+3(%r9),_TIF_NEED_RESCHED
bo BASED(io_reschedule)
- tm __TI_flags+3(%r9),_TIF_SIGPENDING
- bo BASED(io_sigpending)
+ tm __TI_flags+3(%r9),(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)
+ bnz BASED(io_sigpending)
b BASED(io_leave)
#
@@ -636,12 +612,11 @@
b BASED(io_work_loop)
#
-# _TIF_SIGPENDING is set, call do_signal
+# _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal
#
io_sigpending:
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
la %r2,SP_PTREGS(%r15) # load pt_regs
- sr %r3,%r3 # clear *oldset
l %r1,BASED(.Ldo_signal)
basr %r14,%r1 # call do_signal
stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 369ab44..2ac095b 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -1,9 +1,8 @@
/*
- * arch/s390/kernel/entry.S
+ * arch/s390/kernel/entry64.S
* S390 low-level entry points.
*
- * S390 version
- * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) IBM Corp. 1999,2006
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
* Hartmut Penner (hp@de.ibm.com),
* Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
@@ -53,9 +52,10 @@
STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
STACK_SIZE = 1 << STACK_SHIFT
-_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING | \
- _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
-_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING)
+_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \
+ _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
+_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \
+ _TIF_MCCK_PENDING)
#define BASED(name) name-system_call(%r13)
@@ -249,8 +249,8 @@
jo sysc_mcck_pending
tm __TI_flags+7(%r9),_TIF_NEED_RESCHED
jo sysc_reschedule
- tm __TI_flags+7(%r9),_TIF_SIGPENDING
- jo sysc_sigpending
+ tm __TI_flags+7(%r9),(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)
+ jnz sysc_sigpending
tm __TI_flags+7(%r9),_TIF_RESTART_SVC
jo sysc_restart
tm __TI_flags+7(%r9),_TIF_SINGLE_STEP
@@ -272,12 +272,11 @@
jg s390_handle_mcck # TIF bit will be cleared by handler
#
-# _TIF_SIGPENDING is set, call do_signal
+# _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal
#
sysc_sigpending:
ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
la %r2,SP_PTREGS(%r15) # load pt_regs
- sgr %r3,%r3 # clear *oldset
brasl %r14,do_signal # call do_signal
tm __TI_flags+7(%r9),_TIF_RESTART_SVC
jo sysc_restart
@@ -414,52 +413,6 @@
jg sys32_rt_sigreturn # branch to sys32_sigreturn
#endif
-#
-# sigsuspend and rt_sigsuspend need pt_regs as an additional
-# parameter and they have to skip the store of %r2 into the
-# user register %r2 because the return value was set in
-# sigsuspend and rt_sigsuspend already and must not be overwritten!
-#
-
-sys_sigsuspend_glue:
- lgr %r5,%r4 # move mask back
- lgr %r4,%r3 # move history1 parameter
- lgr %r3,%r2 # move history0 parameter
- la %r2,SP_PTREGS(%r15) # load pt_regs as first parameter
- la %r14,6(%r14) # skip store of return value
- jg sys_sigsuspend # branch to sys_sigsuspend
-
-#ifdef CONFIG_COMPAT
-sys32_sigsuspend_glue:
- llgfr %r4,%r4 # unsigned long
- lgr %r5,%r4 # move mask back
- lgfr %r3,%r3 # int
- lgr %r4,%r3 # move history1 parameter
- lgfr %r2,%r2 # int
- lgr %r3,%r2 # move history0 parameter
- la %r2,SP_PTREGS(%r15) # load pt_regs as first parameter
- la %r14,6(%r14) # skip store of return value
- jg sys32_sigsuspend # branch to sys32_sigsuspend
-#endif
-
-sys_rt_sigsuspend_glue:
- lgr %r4,%r3 # move sigsetsize parameter
- lgr %r3,%r2 # move unewset parameter
- la %r2,SP_PTREGS(%r15) # load pt_regs as first parameter
- la %r14,6(%r14) # skip store of return value
- jg sys_rt_sigsuspend # branch to sys_rt_sigsuspend
-
-#ifdef CONFIG_COMPAT
-sys32_rt_sigsuspend_glue:
- llgfr %r3,%r3 # size_t
- lgr %r4,%r3 # move sigsetsize parameter
- llgtr %r2,%r2 # sigset_emu31_t *
- lgr %r3,%r2 # move unewset parameter
- la %r2,SP_PTREGS(%r15) # load pt_regs as first parameter
- la %r14,6(%r14) # skip store of return value
- jg sys32_rt_sigsuspend # branch to sys32_rt_sigsuspend
-#endif
-
sys_sigaltstack_glue:
la %r4,SP_PTREGS(%r15) # load pt_regs as parameter
jg sys_sigaltstack # branch to sys_sigreturn
@@ -646,15 +599,16 @@
lgr %r15,%r1
#
# One of the work bits is on. Find out which one.
-# Checked are: _TIF_SIGPENDING, _TIF_NEED_RESCHED and _TIF_MCCK_PENDING
+# Checked are: _TIF_SIGPENDING, _TIF_RESTORE_SIGPENDING, _TIF_NEED_RESCHED
+# and _TIF_MCCK_PENDING
#
io_work_loop:
tm __TI_flags+7(%r9),_TIF_MCCK_PENDING
jo io_mcck_pending
tm __TI_flags+7(%r9),_TIF_NEED_RESCHED
jo io_reschedule
- tm __TI_flags+7(%r9),_TIF_SIGPENDING
- jo io_sigpending
+ tm __TI_flags+7(%r9),(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)
+ jnz io_sigpending
j io_leave
#
@@ -676,12 +630,11 @@
j io_work_loop
#
-# _TIF_SIGPENDING is set, call do_signal
+# _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal
#
io_sigpending:
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
la %r2,SP_PTREGS(%r15) # load pt_regs
- slgr %r3,%r3 # clear *oldset
brasl %r14,do_signal # call do_signal
stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts
j io_work_loop
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 6ae4a77..ae1927e4 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -1,8 +1,7 @@
/*
* arch/s390/kernel/signal.c
*
- * S390 version
- * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) IBM Corp. 1999,2006
* Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
*
* Based on Intel version
@@ -51,60 +50,24 @@
struct ucontext uc;
} rt_sigframe;
-int do_signal(struct pt_regs *regs, sigset_t *oldset);
-
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
asmlinkage int
-sys_sigsuspend(struct pt_regs * regs, int history0, int history1,
- old_sigset_t mask)
+sys_sigsuspend(int history0, int history1, old_sigset_t mask)
{
- sigset_t saveset;
-
mask &= _BLOCKABLE;
spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
siginitset(¤t->blocked, mask);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- regs->gprs[2] = -EINTR;
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule();
- if (do_signal(regs, &saveset))
- return -EINTR;
- }
-}
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
-asmlinkage long
-sys_rt_sigsuspend(struct pt_regs *regs, sigset_t __user *unewset,
- size_t sigsetsize)
-{
- sigset_t saveset, newset;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&newset, unewset, sizeof(newset)))
- return -EFAULT;
- sigdelsetmask(&newset, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
- regs->gprs[2] = -EINTR;
-
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule();
- if (do_signal(regs, &saveset))
- return -EINTR;
- }
+ return -ERESTARTNOHAND;
}
asmlinkage long
@@ -306,8 +269,8 @@
return sig;
}
-static void setup_frame(int sig, struct k_sigaction *ka,
- sigset_t *set, struct pt_regs * regs)
+static int setup_frame(int sig, struct k_sigaction *ka,
+ sigset_t *set, struct pt_regs * regs)
{
sigframe __user *frame;
@@ -355,13 +318,14 @@
/* Place signal number on stack to allow backtrace from handler. */
if (__put_user(regs->gprs[2], (int __user *) &frame->signo))
goto give_sigsegv;
- return;
+ return 0;
give_sigsegv:
force_sigsegv(sig, current);
+ return -EFAULT;
}
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs * regs)
{
int err = 0;
@@ -409,32 +373,39 @@
regs->gprs[2] = map_signal(sig);
regs->gprs[3] = (unsigned long) &frame->info;
regs->gprs[4] = (unsigned long) &frame->uc;
- return;
+ return 0;
give_sigsegv:
force_sigsegv(sig, current);
+ return -EFAULT;
}
/*
* OK, we're invoking a handler
*/
-static void
+static int
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
{
+ int ret;
+
/* Set up the stack frame */
if (ka->sa.sa_flags & SA_SIGINFO)
- setup_rt_frame(sig, ka, info, oldset, regs);
+ ret = setup_rt_frame(sig, ka, info, oldset, regs);
else
- setup_frame(sig, ka, oldset, regs);
+ ret = setup_frame(sig, ka, oldset, regs);
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
- if (!(ka->sa.sa_flags & SA_NODEFER))
- sigaddset(¤t->blocked,sig);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ if (ret == 0) {
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(¤t->blocked,sig);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+ }
+
+ return ret;
}
/*
@@ -446,12 +417,13 @@
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
+void do_signal(struct pt_regs *regs)
{
unsigned long retval = 0, continue_addr = 0, restart_addr = 0;
siginfo_t info;
int signr;
struct k_sigaction ka;
+ sigset_t *oldset;
/*
* We want the common case to go fast, which
@@ -460,9 +432,11 @@
* if so.
*/
if (!user_mode(regs))
- return 1;
+ return;
- if (!oldset)
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
oldset = ¤t->blocked;
/* Are we from a system call? */
@@ -473,12 +447,14 @@
/* Prepare for system call restart. We do this here so that a
debugger will see the already changed PSW. */
- if (retval == -ERESTARTNOHAND ||
- retval == -ERESTARTSYS ||
- retval == -ERESTARTNOINTR) {
+ switch (retval) {
+ case -ERESTARTNOHAND:
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
regs->gprs[2] = regs->orig_gpr2;
regs->psw.addr = restart_addr;
- } else if (retval == -ERESTART_RESTARTBLOCK) {
+ break;
+ case -ERESTART_RESTARTBLOCK:
regs->gprs[2] = -EINTR;
}
}
@@ -503,17 +479,38 @@
/* Whee! Actually deliver the signal. */
#ifdef CONFIG_COMPAT
if (test_thread_flag(TIF_31BIT)) {
- extern void handle_signal32(unsigned long sig,
- struct k_sigaction *ka,
- siginfo_t *info,
- sigset_t *oldset,
- struct pt_regs *regs);
- handle_signal32(signr, &ka, &info, oldset, regs);
- return 1;
+ extern int handle_signal32(unsigned long sig,
+ struct k_sigaction *ka,
+ siginfo_t *info,
+ sigset_t *oldset,
+ struct pt_regs *regs);
+ if (handle_signal32(
+ signr, &ka, &info, oldset, regs) == 0) {
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
+ return;
}
#endif
- handle_signal(signr, &ka, &info, oldset, regs);
- return 1;
+ if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
+ /*
+ * A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
+ return;
+ }
+
+ /*
+ * If there's no signal to deliver, we just put the saved sigmask back.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
/* Restart a different system call. */
@@ -522,5 +519,4 @@
regs->gprs[2] = __NR_restart_syscall;
set_thread_flag(TIF_RESTART_SVC);
}
- return 0;
}
diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c
index 6a63553..e351780 100644
--- a/arch/s390/kernel/sys_s390.c
+++ b/arch/s390/kernel/sys_s390.c
@@ -122,8 +122,8 @@
#ifndef CONFIG_64BIT
struct sel_arg_struct {
unsigned long n;
- fd_set *inp, *outp, *exp;
- struct timeval *tvp;
+ fd_set __user *inp, *outp, *exp;
+ struct timeval __user *tvp;
};
asmlinkage long old_select(struct sel_arg_struct __user *arg)
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 426d7ca..3280345 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -80,7 +80,7 @@
NI_SYSCALL /* old ssetmask syscall*/
SYSCALL(sys_setreuid16,sys_ni_syscall,sys32_setreuid16_wrapper) /* old setreuid16 syscall */
SYSCALL(sys_setregid16,sys_ni_syscall,sys32_setregid16_wrapper) /* old setregid16 syscall */
-SYSCALL(sys_sigsuspend_glue,sys_sigsuspend_glue,sys32_sigsuspend_glue)
+SYSCALL(sys_sigsuspend,sys_sigsuspend,sys_sigsuspend_wrapper)
SYSCALL(sys_sigpending,sys_sigpending,compat_sys_sigpending_wrapper)
SYSCALL(sys_sethostname,sys_sethostname,sys32_sethostname_wrapper)
SYSCALL(sys_setrlimit,sys_setrlimit,compat_sys_setrlimit_wrapper) /* 75 */
@@ -187,7 +187,7 @@
SYSCALL(sys_rt_sigpending,sys_rt_sigpending,sys32_rt_sigpending_wrapper)
SYSCALL(sys_rt_sigtimedwait,sys_rt_sigtimedwait,compat_sys_rt_sigtimedwait_wrapper)
SYSCALL(sys_rt_sigqueueinfo,sys_rt_sigqueueinfo,sys32_rt_sigqueueinfo_wrapper)
-SYSCALL(sys_rt_sigsuspend_glue,sys_rt_sigsuspend_glue,sys32_rt_sigsuspend_glue)
+SYSCALL(sys_rt_sigsuspend,sys_rt_sigsuspend,compat_sys_rt_sigsuspend_wrapper)
SYSCALL(sys_pread64,sys_pread64,sys32_pread64_wrapper) /* 180 */
SYSCALL(sys_pwrite64,sys_pwrite64,sys32_pwrite64_wrapper)
SYSCALL(sys_chown16,sys_ni_syscall,sys32_chown16_wrapper) /* old chown16 syscall */
@@ -293,5 +293,21 @@
SYSCALL(sys_ioprio_set,sys_ioprio_set,sys_ioprio_set_wrapper)
SYSCALL(sys_ioprio_get,sys_ioprio_get,sys_ioprio_get_wrapper)
SYSCALL(sys_inotify_init,sys_inotify_init,sys_inotify_init)
-SYSCALL(sys_inotify_add_watch,sys_inotify_add_watch,sys_inotify_add_watch_wrapper)
+SYSCALL(sys_inotify_add_watch,sys_inotify_add_watch,sys_inotify_add_watch_wrapper) /* 285 */
SYSCALL(sys_inotify_rm_watch,sys_inotify_rm_watch,sys_inotify_rm_watch_wrapper)
+NI_SYSCALL /* 287 sys_migrate_pages */
+SYSCALL(sys_openat,sys_openat,compat_sys_openat_wrapper)
+SYSCALL(sys_mkdirat,sys_mkdirat,sys_mkdirat_wrapper)
+SYSCALL(sys_mknodat,sys_mknodat,sys_mknodat_wrapper) /* 290 */
+SYSCALL(sys_fchownat,sys_fchownat,sys_fchownat_wrapper)
+SYSCALL(sys_futimesat,sys_futimesat,compat_sys_futimesat_wrapper)
+SYSCALL(sys_newfstatat,sys_newfstatat,compat_sys_newfstatat_wrapper)
+SYSCALL(sys_unlinkat,sys_unlinkat,sys_unlinkat_wrapper)
+SYSCALL(sys_renameat,sys_renameat,sys_renameat_wrapper) /* 295 */
+SYSCALL(sys_linkat,sys_linkat,sys_linkat_wrapper)
+SYSCALL(sys_symlinkat,sys_symlinkat,sys_symlinkat_wrapper)
+SYSCALL(sys_readlinkat,sys_readlinkat,sys_readlinkat_wrapper)
+SYSCALL(sys_fchmodat,sys_fchmodat,sys_fchmodat_wrapper)
+SYSCALL(sys_faccessat,sys_faccessat,sys_faccessat_wrapper) /* 300 */
+SYSCALL(sys_pselect6,sys_pselect6,compat_sys_pselect6_wrapper)
+SYSCALL(sys_ppoll,sys_ppoll,compat_sys_ppoll_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 7c0fe15..fea043b 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -61,9 +61,18 @@
*/
unsigned long long sched_clock(void)
{
- return ((get_clock() - jiffies_timer_cc) * 1000) >> 12;
+ return ((get_clock() - jiffies_timer_cc) * 125) >> 9;
}
+/*
+ * Monotonic_clock - returns # of nanoseconds passed since time_init()
+ */
+unsigned long long monotonic_clock(void)
+{
+ return sched_clock();
+}
+EXPORT_SYMBOL(monotonic_clock);
+
void tod_to_timeval(__u64 todval, struct timespec *xtime)
{
unsigned long long sec;
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 5d21e9e..a46793b 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -486,7 +486,7 @@
info.si_signo = signal;
info.si_errno = 0;
info.si_code = ILL_ILLOPC;
- info.si_addr = (void *) location;
+ info.si_addr = (void __user *) location;
do_trap(interruption_code, signal,
"illegal operation", regs, &info);
}
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index f20b51ff..e05d087 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -6,4 +6,4 @@
lib-y += delay.o string.o
lib-y += $(if $(CONFIG_64BIT),uaccess64.o,uaccess.o)
-lib-$(CONFIG_SMP) += spinlock.o
\ No newline at end of file
+lib-$(CONFIG_SMP) += spinlock.o
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index 2d5cb13..b075ab4 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -42,8 +42,8 @@
static long cmm_timeout_pages = 0;
static long cmm_timeout_seconds = 0;
-static struct cmm_page_array *cmm_page_list = 0;
-static struct cmm_page_array *cmm_timed_page_list = 0;
+static struct cmm_page_array *cmm_page_list = NULL;
+static struct cmm_page_array *cmm_timed_page_list = NULL;
static unsigned long cmm_thread_active = 0;
static struct work_struct cmm_thread_starter;
@@ -259,7 +259,7 @@
static int
cmm_pages_handler(ctl_table *ctl, int write, struct file *filp,
- void *buffer, size_t *lenp, loff_t *ppos)
+ void __user *buffer, size_t *lenp, loff_t *ppos)
{
char buf[16], *p;
long pages;
@@ -300,7 +300,7 @@
static int
cmm_timeout_handler(ctl_table *ctl, int write, struct file *filp,
- void *buffer, size_t *lenp, loff_t *ppos)
+ void __user *buffer, size_t *lenp, loff_t *ppos)
{
char buf[64], *p;
long pages, seconds;
@@ -419,7 +419,7 @@
#ifdef CONFIG_CMM_IUCV
smsg_register_callback(SMSG_PREFIX, cmm_smsg_target);
#endif
- INIT_WORK(&cmm_thread_starter, (void *) cmm_start_thread, 0);
+ INIT_WORK(&cmm_thread_starter, (void *) cmm_start_thread, NULL);
init_waitqueue_head(&cmm_thread_wait);
init_timer(&cmm_timer);
return 0;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 01bc7d5..504d56f 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -396,14 +396,8 @@
source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-config SH_PCLK_FREQ_BOOL
- bool "Set default pclk frequency"
- default y if !SH_RTC
- default n
-
config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
- depends on SH_PCLK_FREQ_BOOL
default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780
default "60000000" if CPU_SUBTYPE_SH7751
default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7760
diff --git a/arch/sh/boards/renesas/rts7751r2d/io.c b/arch/sh/boards/renesas/rts7751r2d/io.c
index c46f915..123abbb 100644
--- a/arch/sh/boards/renesas/rts7751r2d/io.c
+++ b/arch/sh/boards/renesas/rts7751r2d/io.c
@@ -216,24 +216,26 @@
{
volatile __u8 *bp;
volatile __u16 *p;
+ unsigned char *s = addr;
if (CHECK_AX88796L_PORT(port)) {
p = (volatile unsigned short *)port88796l(port, 0);
- while (count--) *((unsigned char *) addr)++ = *p & 0xff;
+ while (count--) *s++ = *p & 0xff;
} else if (PXSEG(port))
- while (count--) *((unsigned char *) addr)++ = *(volatile unsigned char *)port;
+ while (count--) *s++ = *(volatile unsigned char *)port;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
bp = (__u8 *)PCI_IOMAP(port);
- while (count--) *((volatile unsigned char *) addr)++ = *bp;
+ while (count--) *s++ = *bp;
} else {
p = (volatile unsigned short *)port2adr(port);
- while (count--) *((unsigned char *) addr)++ = *p & 0xff;
+ while (count--) *s++ = *p & 0xff;
}
}
void rts7751r2d_insw(unsigned long port, void *addr, unsigned long count)
{
volatile __u16 *p;
+ __u16 *s = addr;
if (CHECK_AX88796L_PORT(port))
p = (volatile unsigned short *)port88796l(port, 1);
@@ -243,7 +245,7 @@
p = (volatile unsigned short *)PCI_IOMAP(port);
else
p = (volatile unsigned short *)port2adr(port);
- while (count--) *((__u16 *) addr)++ = *p;
+ while (count--) *s++ = *p;
}
void rts7751r2d_insl(unsigned long port, void *addr, unsigned long count)
@@ -252,8 +254,9 @@
maybebadio(insl, port);
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
volatile __u32 *p = (__u32 *)PCI_IOMAP(port);
+ __u32 *s = addr;
- while (count--) *((__u32 *) addr)++ = *p;
+ while (count--) *s++ = *p;
} else
maybebadio(insl, port);
}
@@ -262,24 +265,26 @@
{
volatile __u8 *bp;
volatile __u16 *p;
+ const __u8 *s = addr;
if (CHECK_AX88796L_PORT(port)) {
p = (volatile unsigned short *)port88796l(port, 0);
- while (count--) *p = *((unsigned char *) addr)++;
+ while (count--) *p = *s++;
} else if (PXSEG(port))
- while (count--) *(volatile unsigned char *)port = *((unsigned char *) addr)++;
+ while (count--) *(volatile unsigned char *)port = *s++;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
bp = (__u8 *)PCI_IOMAP(port);
- while (count--) *bp = *((volatile unsigned char *) addr)++;
+ while (count--) *bp = *s++;
} else {
p = (volatile unsigned short *)port2adr(port);
- while (count--) *p = *((unsigned char *) addr)++;
+ while (count--) *p = *s++;
}
}
void rts7751r2d_outsw(unsigned long port, const void *addr, unsigned long count)
{
volatile __u16 *p;
+ const __u16 *s = addr;
if (CHECK_AX88796L_PORT(port))
p = (volatile unsigned short *)port88796l(port, 1);
@@ -289,7 +294,7 @@
p = (volatile unsigned short *)PCI_IOMAP(port);
else
p = (volatile unsigned short *)port2adr(port);
- while (count--) *p = *((__u16 *) addr)++;
+ while (count--) *p = *s++;
}
void rts7751r2d_outsl(unsigned long port, const void *addr, unsigned long count)
@@ -298,8 +303,9 @@
maybebadio(outsl, port);
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
volatile __u32 *p = (__u32 *)PCI_IOMAP(port);
+ const __u32 *s = addr;
- while (count--) *p = *((__u32 *) addr)++;
+ while (count--) *p = *s++;
} else
maybebadio(outsl, port);
}
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/superh/microdev/io.c
index fe83b2c..1ed7f88 100644
--- a/arch/sh/boards/superh/microdev/io.c
+++ b/arch/sh/boards/superh/microdev/io.c
@@ -16,7 +16,7 @@
#include <linux/pci.h>
#include <linux/wait.h>
#include <asm/io.h>
-#include <asm/mach/io.h>
+#include <asm/microdev.h>
/*
* we need to have a 'safe' address to re-direct all I/O requests
@@ -52,8 +52,90 @@
#define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */
#define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */
-#define PORT2ADDR(x) (microdev_isa_port2addr(x))
+/*
+ * map I/O ports to memory-mapped addresses
+ */
+static unsigned long microdev_isa_port2addr(unsigned long offset)
+{
+ unsigned long result;
+ if ((offset >= IO_LAN91C111_BASE) &&
+ (offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
+ /*
+ * SMSC LAN91C111 Ethernet chip
+ */
+ result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
+ } else if ((offset >= IO_SUPERIO_BASE) &&
+ (offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
+ /*
+ * SMSC FDC37C93xAPM SuperIO chip
+ *
+ * Configuration Registers
+ */
+ result = IO_SUPERIO_PHYS + (offset << 1);
+#if 0
+ } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
+ offset == KBD_STATUS_REG) {
+ /*
+ * SMSC FDC37C93xAPM SuperIO chip
+ *
+ * PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
+ */
+ result = IO_SUPERIO_PHYS + (offset << 1);
+#endif
+ } else if (((offset >= IO_IDE1_BASE) &&
+ (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) ||
+ (offset == IO_IDE1_MISC)) {
+ /*
+ * SMSC FDC37C93xAPM SuperIO chip
+ *
+ * IDE #1
+ */
+ result = IO_SUPERIO_PHYS + (offset << 1);
+ } else if (((offset >= IO_IDE2_BASE) &&
+ (offset < IO_IDE2_BASE + IO_IDE_EXTENT)) ||
+ (offset == IO_IDE2_MISC)) {
+ /*
+ * SMSC FDC37C93xAPM SuperIO chip
+ *
+ * IDE #2
+ */
+ result = IO_SUPERIO_PHYS + (offset << 1);
+ } else if ((offset >= IO_SERIAL1_BASE) &&
+ (offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
+ /*
+ * SMSC FDC37C93xAPM SuperIO chip
+ *
+ * Serial #1
+ */
+ result = IO_SUPERIO_PHYS + (offset << 1);
+ } else if ((offset >= IO_SERIAL2_BASE) &&
+ (offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
+ /*
+ * SMSC FDC37C93xAPM SuperIO chip
+ *
+ * Serial #2
+ */
+ result = IO_SUPERIO_PHYS + (offset << 1);
+ } else if ((offset >= IO_ISP1161_BASE) &&
+ (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
+ /*
+ * Philips USB ISP1161x chip
+ */
+ result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
+ } else {
+ /*
+ * safe default.
+ */
+ printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
+ __FUNCTION__, offset);
+ result = PVR;
+ }
+
+ return result;
+}
+
+#define PORT2ADDR(x) (microdev_isa_port2addr(x))
static inline void delay(void)
{
@@ -94,6 +176,17 @@
return *(volatile unsigned int*)PORT2ADDR(port);
}
+void microdev_outw(unsigned short b, unsigned long port)
+{
+#ifdef CONFIG_PCI
+ if (port >= PCIBIOS_MIN_IO) {
+ microdev_pci_outw(b, port);
+ return;
+ }
+#endif
+ *(volatile unsigned short*)PORT2ADDR(port) = b;
+}
+
void microdev_outb(unsigned char b, unsigned long port)
{
#ifdef CONFIG_PCI
@@ -158,17 +251,6 @@
}
}
-void microdev_outw(unsigned short b, unsigned long port)
-{
-#ifdef CONFIG_PCI
- if (port >= PCIBIOS_MIN_IO) {
- microdev_pci_outw(b, port);
- return;
- }
-#endif
- *(volatile unsigned short*)PORT2ADDR(port) = b;
-}
-
void microdev_outl(unsigned int b, unsigned long port)
{
#ifdef CONFIG_PCI
@@ -284,87 +366,3 @@
while (count--)
*port_addr = *buf++;
}
-
-/*
- * map I/O ports to memory-mapped addresses
- */
-unsigned long microdev_isa_port2addr(unsigned long offset)
-{
- unsigned long result;
-
- if ((offset >= IO_LAN91C111_BASE) &&
- (offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
- /*
- * SMSC LAN91C111 Ethernet chip
- */
- result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
- } else if ((offset >= IO_SUPERIO_BASE) &&
- (offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * Configuration Registers
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
-#if 0
- } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
- offset == KBD_STATUS_REG) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
-#endif
- } else if (((offset >= IO_IDE1_BASE) &&
- (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) ||
- (offset == IO_IDE1_MISC)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * IDE #1
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if (((offset >= IO_IDE2_BASE) &&
- (offset < IO_IDE2_BASE + IO_IDE_EXTENT)) ||
- (offset == IO_IDE2_MISC)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * IDE #2
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if ((offset >= IO_SERIAL1_BASE) &&
- (offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * Serial #1
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if ((offset >= IO_SERIAL2_BASE) &&
- (offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * Serial #2
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if ((offset >= IO_ISP1161_BASE) &&
- (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
- /*
- * Philips USB ISP1161x chip
- */
- result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
- } else {
- /*
- * safe default.
- */
- printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
- __FUNCTION__, offset);
- result = PVR;
- }
-
- return result;
-}
-
diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/superh/microdev/irq.c
index 1395c1e..efcbd86 100644
--- a/arch/sh/boards/superh/microdev/irq.c
+++ b/arch/sh/boards/superh/microdev/irq.c
@@ -15,7 +15,7 @@
#include <asm/system.h>
#include <asm/io.h>
-#include <asm/mach/irq.h>
+#include <asm/microdev.h>
#define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c
index 1c1d65f..892b14d 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/superh/microdev/setup.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
* Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004 Paul Mundt
+ * Copyright (C) 2004, 2005 Paul Mundt
*
* SuperH SH4-202 MicroDev board support.
*
@@ -15,11 +15,10 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
+#include <video/s1d13xxxfb.h>
+#include <asm/microdev.h>
#include <asm/io.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/io.h>
#include <asm/machvec.h>
-#include <asm/machvec_init.h>
extern void microdev_heartbeat(void);
@@ -51,8 +50,6 @@
.mv_outsw = microdev_outsw,
.mv_outsl = microdev_outsl,
- .mv_isa_port2addr = microdev_isa_port2addr,
-
.mv_init_irq = init_microdev_irq,
#ifdef CONFIG_HEARTBEAT
@@ -142,16 +139,161 @@
.resource = smc91x_resources,
};
-static int __init smc91x_setup(void)
+#ifdef CONFIG_FB_S1D13XXX
+static struct s1d13xxxfb_regval s1d13806_initregs[] = {
+ { S1DREG_MISC, 0x00 },
+ { S1DREG_COM_DISP_MODE, 0x00 },
+ { S1DREG_GPIO_CNF0, 0x00 },
+ { S1DREG_GPIO_CNF1, 0x00 },
+ { S1DREG_GPIO_CTL0, 0x00 },
+ { S1DREG_GPIO_CTL1, 0x00 },
+ { S1DREG_CLK_CNF, 0x02 },
+ { S1DREG_LCD_CLK_CNF, 0x01 },
+ { S1DREG_CRT_CLK_CNF, 0x03 },
+ { S1DREG_MPLUG_CLK_CNF, 0x03 },
+ { S1DREG_CPU2MEM_WST_SEL, 0x02 },
+ { S1DREG_SDRAM_REF_RATE, 0x03 },
+ { S1DREG_SDRAM_TC0, 0x00 },
+ { S1DREG_SDRAM_TC1, 0x01 },
+ { S1DREG_MEM_CNF, 0x80 },
+ { S1DREG_PANEL_TYPE, 0x25 },
+ { S1DREG_MOD_RATE, 0x00 },
+ { S1DREG_LCD_DISP_HWIDTH, 0x63 },
+ { S1DREG_LCD_NDISP_HPER, 0x1e },
+ { S1DREG_TFT_FPLINE_START, 0x06 },
+ { S1DREG_TFT_FPLINE_PWIDTH, 0x03 },
+ { S1DREG_LCD_DISP_VHEIGHT0, 0x57 },
+ { S1DREG_LCD_DISP_VHEIGHT1, 0x02 },
+ { S1DREG_LCD_NDISP_VPER, 0x00 },
+ { S1DREG_TFT_FPFRAME_START, 0x0a },
+ { S1DREG_TFT_FPFRAME_PWIDTH, 0x81 },
+ { S1DREG_LCD_DISP_MODE, 0x03 },
+ { S1DREG_LCD_MISC, 0x00 },
+ { S1DREG_LCD_DISP_START0, 0x00 },
+ { S1DREG_LCD_DISP_START1, 0x00 },
+ { S1DREG_LCD_DISP_START2, 0x00 },
+ { S1DREG_LCD_MEM_OFF0, 0x90 },
+ { S1DREG_LCD_MEM_OFF1, 0x01 },
+ { S1DREG_LCD_PIX_PAN, 0x00 },
+ { S1DREG_LCD_DISP_FIFO_HTC, 0x00 },
+ { S1DREG_LCD_DISP_FIFO_LTC, 0x00 },
+ { S1DREG_CRT_DISP_HWIDTH, 0x63 },
+ { S1DREG_CRT_NDISP_HPER, 0x1f },
+ { S1DREG_CRT_HRTC_START, 0x04 },
+ { S1DREG_CRT_HRTC_PWIDTH, 0x8f },
+ { S1DREG_CRT_DISP_VHEIGHT0, 0x57 },
+ { S1DREG_CRT_DISP_VHEIGHT1, 0x02 },
+ { S1DREG_CRT_NDISP_VPER, 0x1b },
+ { S1DREG_CRT_VRTC_START, 0x00 },
+ { S1DREG_CRT_VRTC_PWIDTH, 0x83 },
+ { S1DREG_TV_OUT_CTL, 0x10 },
+ { S1DREG_CRT_DISP_MODE, 0x05 },
+ { S1DREG_CRT_DISP_START0, 0x00 },
+ { S1DREG_CRT_DISP_START1, 0x00 },
+ { S1DREG_CRT_DISP_START2, 0x00 },
+ { S1DREG_CRT_MEM_OFF0, 0x20 },
+ { S1DREG_CRT_MEM_OFF1, 0x03 },
+ { S1DREG_CRT_PIX_PAN, 0x00 },
+ { S1DREG_CRT_DISP_FIFO_HTC, 0x00 },
+ { S1DREG_CRT_DISP_FIFO_LTC, 0x00 },
+ { S1DREG_LCD_CUR_CTL, 0x00 },
+ { S1DREG_LCD_CUR_START, 0x01 },
+ { S1DREG_LCD_CUR_XPOS0, 0x00 },
+ { S1DREG_LCD_CUR_XPOS1, 0x00 },
+ { S1DREG_LCD_CUR_YPOS0, 0x00 },
+ { S1DREG_LCD_CUR_YPOS1, 0x00 },
+ { S1DREG_LCD_CUR_BCTL0, 0x00 },
+ { S1DREG_LCD_CUR_GCTL0, 0x00 },
+ { S1DREG_LCD_CUR_RCTL0, 0x00 },
+ { S1DREG_LCD_CUR_BCTL1, 0x1f },
+ { S1DREG_LCD_CUR_GCTL1, 0x3f },
+ { S1DREG_LCD_CUR_RCTL1, 0x1f },
+ { S1DREG_LCD_CUR_FIFO_HTC, 0x00 },
+ { S1DREG_CRT_CUR_CTL, 0x00 },
+ { S1DREG_CRT_CUR_START, 0x01 },
+ { S1DREG_CRT_CUR_XPOS0, 0x00 },
+ { S1DREG_CRT_CUR_XPOS1, 0x00 },
+ { S1DREG_CRT_CUR_YPOS0, 0x00 },
+ { S1DREG_CRT_CUR_YPOS1, 0x00 },
+ { S1DREG_CRT_CUR_BCTL0, 0x00 },
+ { S1DREG_CRT_CUR_GCTL0, 0x00 },
+ { S1DREG_CRT_CUR_RCTL0, 0x00 },
+ { S1DREG_CRT_CUR_BCTL1, 0x1f },
+ { S1DREG_CRT_CUR_GCTL1, 0x3f },
+ { S1DREG_CRT_CUR_RCTL1, 0x1f },
+ { S1DREG_CRT_CUR_FIFO_HTC, 0x00 },
+ { S1DREG_BBLT_CTL0, 0x00 },
+ { S1DREG_BBLT_CTL1, 0x00 },
+ { S1DREG_BBLT_CC_EXP, 0x00 },
+ { S1DREG_BBLT_OP, 0x00 },
+ { S1DREG_BBLT_SRC_START0, 0x00 },
+ { S1DREG_BBLT_SRC_START1, 0x00 },
+ { S1DREG_BBLT_SRC_START2, 0x00 },
+ { S1DREG_BBLT_DST_START0, 0x00 },
+ { S1DREG_BBLT_DST_START1, 0x00 },
+ { S1DREG_BBLT_DST_START2, 0x00 },
+ { S1DREG_BBLT_MEM_OFF0, 0x00 },
+ { S1DREG_BBLT_MEM_OFF1, 0x00 },
+ { S1DREG_BBLT_WIDTH0, 0x00 },
+ { S1DREG_BBLT_WIDTH1, 0x00 },
+ { S1DREG_BBLT_HEIGHT0, 0x00 },
+ { S1DREG_BBLT_HEIGHT1, 0x00 },
+ { S1DREG_BBLT_BGC0, 0x00 },
+ { S1DREG_BBLT_BGC1, 0x00 },
+ { S1DREG_BBLT_FGC0, 0x00 },
+ { S1DREG_BBLT_FGC1, 0x00 },
+ { S1DREG_LKUP_MODE, 0x00 },
+ { S1DREG_LKUP_ADDR, 0x00 },
+ { S1DREG_PS_CNF, 0x10 },
+ { S1DREG_PS_STATUS, 0x00 },
+ { S1DREG_CPU2MEM_WDOGT, 0x00 },
+ { S1DREG_COM_DISP_MODE, 0x02 },
+};
+
+static struct s1d13xxxfb_pdata s1d13806_platform_data = {
+ .initregs = s1d13806_initregs,
+ .initregssize = ARRAY_SIZE(s1d13806_initregs),
+};
+
+static struct resource s1d13806_resources[] = {
+ [0] = {
+ .start = 0x07200000,
+ .end = 0x07200000 + 0x00200000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x07000000,
+ .end = 0x07000000 + 0x00200000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device s1d13806_device = {
+ .name = "s1d13806fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s1d13806_resources),
+ .resource = s1d13806_resources,
+
+ .dev = {
+ .platform_data = &s1d13806_platform_data,
+ },
+};
+#endif
+
+static struct platform_device *microdev_devices[] __initdata = {
+ &smc91x_device,
+#ifdef CONFIG_FB_S1D13XXX
+ &s1d13806_device,
+#endif
+};
+
+static int __init microdev_devices_setup(void)
{
- return platform_device_register(&smc91x_device);
+ return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
}
-__initcall(smc91x_setup);
+__initcall(microdev_devices_setup);
- /*
- * Initialize the board
- */
void __init platform_setup(void)
{
int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
diff --git a/arch/sh/boards/unknown/Makefile b/arch/sh/boards/unknown/Makefile
index cffc210..7d18f40 100644
--- a/arch/sh/boards/unknown/Makefile
+++ b/arch/sh/boards/unknown/Makefile
@@ -2,5 +2,5 @@
# Makefile for unknown SH boards
#
-obj-y := mach.o io.o setup.o
+obj-y := setup.o
diff --git a/arch/sh/boards/unknown/io.c b/arch/sh/boards/unknown/io.c
deleted file mode 100644
index 8f3f172..0000000
--- a/arch/sh/boards/unknown/io.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/sh/kernel/io_unknown.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * I/O routine for unknown hardware.
- */
-
-static unsigned int unknown_handler(void)
-{
- return 0;
-}
-
-#define UNKNOWN_ALIAS(fn) \
- void unknown_##fn(void) __attribute__ ((alias ("unknown_handler")));
-
-UNKNOWN_ALIAS(inb)
-UNKNOWN_ALIAS(inw)
-UNKNOWN_ALIAS(inl)
-UNKNOWN_ALIAS(outb)
-UNKNOWN_ALIAS(outw)
-UNKNOWN_ALIAS(outl)
-UNKNOWN_ALIAS(inb_p)
-UNKNOWN_ALIAS(inw_p)
-UNKNOWN_ALIAS(inl_p)
-UNKNOWN_ALIAS(outb_p)
-UNKNOWN_ALIAS(outw_p)
-UNKNOWN_ALIAS(outl_p)
-UNKNOWN_ALIAS(insb)
-UNKNOWN_ALIAS(insw)
-UNKNOWN_ALIAS(insl)
-UNKNOWN_ALIAS(outsb)
-UNKNOWN_ALIAS(outsw)
-UNKNOWN_ALIAS(outsl)
-UNKNOWN_ALIAS(readb)
-UNKNOWN_ALIAS(readw)
-UNKNOWN_ALIAS(readl)
-UNKNOWN_ALIAS(writeb)
-UNKNOWN_ALIAS(writew)
-UNKNOWN_ALIAS(writel)
-UNKNOWN_ALIAS(isa_port2addr)
-UNKNOWN_ALIAS(ioremap)
-UNKNOWN_ALIAS(iounmap)
diff --git a/arch/sh/boards/unknown/mach.c b/arch/sh/boards/unknown/mach.c
deleted file mode 100644
index ad0bcc6..0000000
--- a/arch/sh/boards/unknown/mach.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/arch/sh/kernel/mach_unknown.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine specific code for an unknown machine (internal peripherials only)
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/machvec_init.h>
-
-#include <asm/io_unknown.h>
-
-#include <asm/rtc.h>
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_unknown __initmv = {
-#if defined(CONFIG_CPU_SH4)
- .mv_nr_irqs = 48,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
- .mv_nr_irqs = 32,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
- .mv_nr_irqs = 61,
-#endif
-
- .mv_inb = unknown_inb,
- .mv_inw = unknown_inw,
- .mv_inl = unknown_inl,
- .mv_outb = unknown_outb,
- .mv_outw = unknown_outw,
- .mv_outl = unknown_outl,
-
- .mv_inb_p = unknown_inb_p,
- .mv_inw_p = unknown_inw_p,
- .mv_inl_p = unknown_inl_p,
- .mv_outb_p = unknown_outb_p,
- .mv_outw_p = unknown_outw_p,
- .mv_outl_p = unknown_outl_p,
-
- .mv_insb = unknown_insb,
- .mv_insw = unknown_insw,
- .mv_insl = unknown_insl,
- .mv_outsb = unknown_outsb,
- .mv_outsw = unknown_outsw,
- .mv_outsl = unknown_outsl,
-
- .mv_readb = unknown_readb,
- .mv_readw = unknown_readw,
- .mv_readl = unknown_readl,
- .mv_writeb = unknown_writeb,
- .mv_writew = unknown_writew,
- .mv_writel = unknown_writel,
-
- .mv_ioremap = unknown_ioremap,
- .mv_iounmap = unknown_iounmap,
-
- .mv_isa_port2addr = unknown_isa_port2addr,
-};
-ALIAS_MV(unknown)
diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c
index 7d772a6..02e84f0 100644
--- a/arch/sh/boards/unknown/setup.c
+++ b/arch/sh/boards/unknown/setup.c
@@ -7,10 +7,20 @@
* License. See linux/COPYING for more information.
*
* Setup code for an unknown machine (internal peripherials only)
+ *
+ * This is the simplest of all boards, and serves only as a quick and dirty
+ * method to start debugging a new board during bring-up until proper board
+ * setup code is written.
*/
-
#include <linux/config.h>
#include <linux/init.h>
+#include <asm/machvec.h>
+#include <asm/irq.h>
+
+struct sh_machine_vector mv_unknown __initmv = {
+ .mv_nr_irqs = NR_IRQS,
+};
+ALIAS_MV(unknown)
const char *get_system_type(void)
{
diff --git a/arch/sh/cchips/voyagergx/consistent.c b/arch/sh/cchips/voyagergx/consistent.c
index 3d9a02c..07e8b9c 100644
--- a/arch/sh/cchips/voyagergx/consistent.c
+++ b/arch/sh/cchips/voyagergx/consistent.c
@@ -15,7 +15,7 @@
#include <linux/module.h>
#include <linux/device.h>
#include <asm/io.h>
-#include <asm/bus-sh.h>
+
struct voya_alloc_entry {
struct list_head list;
@@ -30,12 +30,13 @@
#define OHCI_HCCA_SIZE 0x100
#define OHCI_SRAM_SIZE 0x10000
+#define VOYAGER_OHCI_NAME "voyager-ohci"
+
void *voyagergx_consistent_alloc(struct device *dev, size_t size,
dma_addr_t *handle, gfp_t flag)
{
struct list_head *list = &voya_alloc_list;
struct voya_alloc_entry *entry;
- struct sh_dev *shdev = to_sh_dev(dev);
unsigned long start, end;
unsigned long flags;
@@ -46,9 +47,7 @@
*
* Everything else goes through consistent_alloc().
*/
- if (!dev || dev->bus != &sh_bus_types[SH_BUS_VIRT] ||
- (dev->bus == &sh_bus_types[SH_BUS_VIRT] &&
- shdev->dev_id != SH_DEV_ID_USB_OHCI))
+ if (!dev || strcmp(dev->driver->name, VOYAGER_OHCI_NAME))
return NULL;
start = OHCI_SRAM_START + OHCI_HCCA_SIZE;
@@ -98,12 +97,9 @@
void *vaddr, dma_addr_t handle)
{
struct voya_alloc_entry *entry;
- struct sh_dev *shdev = to_sh_dev(dev);
unsigned long flags;
- if (!dev || dev->bus != &sh_bus_types[SH_BUS_VIRT] ||
- (dev->bus == &sh_bus_types[SH_BUS_VIRT] &&
- shdev->dev_id != SH_DEV_ID_USB_OHCI))
+ if (!dev || strcmp(dev->driver->name, VOYAGER_OHCI_NAME))
return -EINVAL;
spin_lock_irqsave(&voya_list_lock, flags);
@@ -123,4 +119,3 @@
EXPORT_SYMBOL(voyagergx_consistent_alloc);
EXPORT_SYMBOL(voyagergx_consistent_free);
-
diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c
index 1b6ac52..2ee330b 100644
--- a/arch/sh/cchips/voyagergx/irq.c
+++ b/arch/sh/cchips/voyagergx/irq.c
@@ -163,7 +163,12 @@
return irq;
}
-static struct irqaction irq0 = { voyagergx_interrupt, SA_INTERRUPT, 0, "VOYAGERGX", NULL, NULL};
+static struct irqaction irq0 = {
+ .name = "voyagergx",
+ .handler = voyagergx_interrupt,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+};
void __init setup_voyagergx_irq(void)
{
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index a3bd280..ab3db76 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,10 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-sh
-# Wed Mar 2 15:09:41 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 19:43:20 2006
#
CONFIG_SUPERH=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
@@ -17,11 +16,13 @@
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
@@ -29,22 +30,29 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -52,6 +60,24 @@
# CONFIG_MODULES is not set
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# System type
#
# CONFIG_SH_SOLUTION_ENGINE is not set
@@ -61,9 +87,7 @@
# CONFIG_SH_7751_SYSTEMH is not set
# CONFIG_SH_STB1_HARP is not set
# CONFIG_SH_STB1_OVERDRIVE is not set
-# CONFIG_SH_HP620 is not set
-# CONFIG_SH_HP680 is not set
-# CONFIG_SH_HP690 is not set
+# CONFIG_SH_HP6XX is not set
# CONFIG_SH_CQREEK is not set
# CONFIG_SH_DMIDA is not set
# CONFIG_SH_EC3104 is not set
@@ -78,45 +102,94 @@
# CONFIG_SH_SECUREEDGE5410 is not set
# CONFIG_SH_HS7751RVOIP is not set
# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R7780RP is not set
# CONFIG_SH_EDOSK7705 is not set
CONFIG_SH_SH4202_MICRODEV=y
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
# CONFIG_SH_UNKNOWN is not set
-# CONFIG_CPU_SH2 is not set
-# CONFIG_CPU_SH3 is not set
+
+#
+# Processor selection
+#
CONFIG_CPU_SH4=y
+
+#
+# SH-2 Processor Support
+#
# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
+
+#
+# SH-4 Processor Support
+#
# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+CONFIG_CPU_SUBTYPE_SH4_202=y
+
+#
+# ST40 Processor Support
+#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-CONFIG_CPU_SUBTYPE_SH4_202=y
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
CONFIG_MMU=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200"
-CONFIG_MEMORY_START=0x08000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_MEMORY_SET=y
-# CONFIG_MEMORY_OVERRIDE is not set
-CONFIG_SH_RTC=y
-CONFIG_SH_FPU=y
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_PREEMPT=y
-# CONFIG_UBC_WAKEUP is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
# CONFIG_SH_WRITETHROUGH is not set
# CONFIG_SH_OCRAM is not set
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x04000000
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SH_RTC=y
+CONFIG_SH_FPU=y
# CONFIG_SH_STORE_QUEUES is not set
-# CONFIG_SMP is not set
-CONFIG_SH_PCLK_CALC=y
-CONFIG_SH_PCLK_FREQ=65986048
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ=66000000
#
# CPU Frequency scaling
@@ -137,9 +210,25 @@
CONFIG_HEARTBEAT=y
#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+# Kernel features
#
-CONFIG_ISA=y
+# CONFIG_KEXEC is not set
+CONFIG_PREEMPT=y
+# CONFIG_SMP is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200"
+
+#
+# Bus options
+#
+# CONFIG_SUPERHYWAY is not set
# CONFIG_PCI is not set
#
@@ -148,11 +237,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
# PCI Hotplug Support
#
@@ -164,9 +248,79 @@
# CONFIG_BINFMT_MISC is not set
#
-# SH initrd options
+# Networking
#
-# CONFIG_EMBEDDED_RAMDISK is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -180,6 +334,11 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -192,13 +351,10 @@
#
# Plug and Play support
#
-# CONFIG_PNP is not set
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
@@ -206,17 +362,7 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@@ -241,9 +387,7 @@
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
-CONFIG_IDE_SH=y
# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
@@ -251,14 +395,10 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
@@ -266,6 +406,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -276,69 +417,8 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -346,9 +426,9 @@
# CONFIG_TUN is not set
#
-# ARCnet devices
+# PHY device support
#
-# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
@@ -356,17 +436,7 @@
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
CONFIG_SMC91X=y
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
@@ -379,7 +449,6 @@
#
# Token Ring devices
#
-# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
@@ -394,6 +463,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -411,20 +482,10 @@
# CONFIG_INPUT is not set
#
-# Userland interfaces
+# Hardware I/O ports
#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
#
# Character devices
@@ -464,24 +525,46 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -508,7 +591,7 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
@@ -524,13 +607,21 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# EDAC - error detection and reporting (RAS)
+#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -540,17 +631,17 @@
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -574,16 +665,12 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -607,12 +694,14 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
@@ -622,6 +711,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -681,8 +771,10 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_PREEMPT=y
+CONFIG_LOG_BUF_SHIFT=14
# CONFIG_FRAME_POINTER is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -706,6 +798,7 @@
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
@@ -730,5 +823,6 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 7a86eeb..f05cd96 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -8,7 +8,7 @@
ptrace.o setup.o time.o sys_sh.o semaphore.o \
io.o io_generic.o sh_ksyms.o
-obj-y += cpu/
+obj-y += cpu/ timers/
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_CF_ENABLER) += cf-enabler.o
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index 5bfc33b..59d5b74 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -2,7 +2,7 @@
# Makefile for the Linux/SuperH CPU-specifc backends.
#
-obj-y += irq/ init.o bus.o clock.o
+obj-y += irq/ init.o clock.o
obj-$(CONFIG_CPU_SH2) += sh2/
obj-$(CONFIG_CPU_SH3) += sh3/
diff --git a/arch/sh/kernel/cpu/bus.c b/arch/sh/kernel/cpu/bus.c
deleted file mode 100644
index fc6c4bd..0000000
--- a/arch/sh/kernel/cpu/bus.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * arch/sh/kernel/cpu/bus.c
- *
- * Virtual bus for SuperH.
- *
- * Copyright (C) 2004 Paul Mundt
- *
- * Shamelessly cloned from arch/arm/mach-omap/bus.c, which was written
- * by:
- *
- * Copyright (C) 2003 - 2004 Nokia Corporation
- * Written by Tony Lindgren <tony@atomide.com>
- * Portions of code based on sa1111.c.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <asm/bus-sh.h>
-
-static int sh_bus_match(struct device *dev, struct device_driver *drv)
-{
- struct sh_driver *shdrv = to_sh_driver(drv);
- struct sh_dev *shdev = to_sh_dev(dev);
-
- return shdev->dev_id == shdrv->dev_id;
-}
-
-static int sh_bus_suspend(struct device *dev, pm_message_t state)
-{
- struct sh_dev *shdev = to_sh_dev(dev);
- struct sh_driver *shdrv = to_sh_driver(dev->driver);
-
- if (shdrv && shdrv->suspend)
- return shdrv->suspend(shdev, state);
-
- return 0;
-}
-
-static int sh_bus_resume(struct device *dev)
-{
- struct sh_dev *shdev = to_sh_dev(dev);
- struct sh_driver *shdrv = to_sh_driver(dev->driver);
-
- if (shdrv && shdrv->resume)
- return shdrv->resume(shdev);
-
- return 0;
-}
-
-static int sh_device_probe(struct device *dev)
-{
- struct sh_dev *shdev = to_sh_dev(dev);
- struct sh_driver *shdrv = to_sh_driver(dev->driver);
-
- if (shdrv && shdrv->probe)
- return shdrv->probe(shdev);
-
- return -ENODEV;
-}
-
-static int sh_device_remove(struct device *dev)
-{
- struct sh_dev *shdev = to_sh_dev(dev);
- struct sh_driver *shdrv = to_sh_driver(dev->driver);
-
- if (shdrv && shdrv->remove)
- return shdrv->remove(shdev);
-
- return 0;
-}
-
-static struct device sh_bus_devices[SH_NR_BUSES] = {
- {
- .bus_id = SH_BUS_NAME_VIRT,
- },
-};
-
-struct bus_type sh_bus_types[SH_NR_BUSES] = {
- {
- .name = SH_BUS_NAME_VIRT,
- .match = sh_bus_match,
- .probe = sh_bus_probe,
- .remove = sh_bus_remove,
- .suspend = sh_bus_suspend,
- .resume = sh_bus_resume,
- },
-};
-
-int sh_device_register(struct sh_dev *dev)
-{
- if (!dev)
- return -EINVAL;
-
- if (dev->bus_id < 0 || dev->bus_id >= SH_NR_BUSES) {
- printk(KERN_ERR "%s: bus_id invalid: %s bus: %d\n",
- __FUNCTION__, dev->name, dev->bus_id);
- return -EINVAL;
- }
-
- dev->dev.parent = &sh_bus_devices[dev->bus_id];
- dev->dev.bus = &sh_bus_types[dev->bus_id];
-
- /* This is needed for USB OHCI to work */
- if (dev->dma_mask)
- dev->dev.dma_mask = dev->dma_mask;
- if (dev->coherent_dma_mask)
- dev->dev.coherent_dma_mask = dev->coherent_dma_mask;
-
- snprintf(dev->dev.bus_id, BUS_ID_SIZE, "%s%u",
- dev->name, dev->dev_id);
-
- printk(KERN_INFO "Registering SH device '%s'. Parent at %s\n",
- dev->dev.bus_id, dev->dev.parent->bus_id);
-
- return device_register(&dev->dev);
-}
-
-void sh_device_unregister(struct sh_dev *dev)
-{
- device_unregister(&dev->dev);
-}
-
-int sh_driver_register(struct sh_driver *drv)
-{
- if (!drv)
- return -EINVAL;
-
- if (drv->bus_id < 0 || drv->bus_id >= SH_NR_BUSES) {
- printk(KERN_ERR "%s: bus_id invalid: bus: %d device %d\n",
- __FUNCTION__, drv->bus_id, drv->dev_id);
- return -EINVAL;
- }
-
- drv->drv.bus = &sh_bus_types[drv->bus_id];
-
- return driver_register(&drv->drv);
-}
-
-void sh_driver_unregister(struct sh_driver *drv)
-{
- driver_unregister(&drv->drv);
-}
-
-static int __init sh_bus_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < SH_NR_BUSES; i++) {
- ret = device_register(&sh_bus_devices[i]);
- if (ret != 0) {
- printk(KERN_ERR "Unable to register bus device %s\n",
- sh_bus_devices[i].bus_id);
- continue;
- }
-
- ret = bus_register(&sh_bus_types[i]);
- if (ret != 0) {
- printk(KERN_ERR "Unable to register bus %s\n",
- sh_bus_types[i].name);
- device_unregister(&sh_bus_devices[i]);
- }
- }
-
- printk(KERN_INFO "SH Virtual Bus initialized\n");
-
- return ret;
-}
-
-static void __exit sh_bus_exit(void)
-{
- int i;
-
- for (i = 0; i < SH_NR_BUSES; i++) {
- bus_unregister(&sh_bus_types[i]);
- device_unregister(&sh_bus_devices[i]);
- }
-}
-
-module_init(sh_bus_init);
-module_exit(sh_bus_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("SH Virtual Bus");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sh_bus_types);
-EXPORT_SYMBOL(sh_device_register);
-EXPORT_SYMBOL(sh_device_unregister);
-EXPORT_SYMBOL(sh_driver_register);
-EXPORT_SYMBOL(sh_driver_unregister);
-
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 989e7fd..97fa37f 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -38,9 +38,7 @@
static struct clk master_clk = {
.name = "master_clk",
.flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
-#ifdef CONFIG_SH_PCLK_FREQ_BOOL
.rate = CONFIG_SH_PCLK_FREQ,
-#endif
};
static struct clk module_clk = {
@@ -227,16 +225,7 @@
{
int i, ret = 0;
- if (unlikely(!master_clk.rate))
- /*
- * NOTE: This will break if the default divisor has been
- * changed.
- *
- * No one should be changing the default on us however,
- * expect that a sane value for CONFIG_SH_PCLK_FREQ will
- * be defined in the event of a different divisor.
- */
- master_clk.rate = get_timer_frequency() * 4;
+ BUG_ON(unlikely(!master_clk.rate));
for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) {
struct clk *clk = onchip_clocks[i];
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index fdbd718..e55150e 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -108,8 +108,7 @@
enable_ipr_irq(irq);
}
-void make_ipr_irq(unsigned int irq, unsigned int addr, int pos,
- int priority, int maskpos)
+void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority)
{
disable_irq_nosync(irq);
ipr_data[irq].addr = addr;
@@ -123,44 +122,44 @@
void __init init_IRQ(void)
{
#ifndef CONFIG_CPU_SUBTYPE_SH7780
- make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY, 0);
- make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY, 0);
+ make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY);
+ make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY);
#if defined(CONFIG_SH_RTC)
- make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY, 0);
+ make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY);
#endif
#ifdef SCI_ERI_IRQ
- make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
- make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
- make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
+ make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
+ make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
+ make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
#endif
#ifdef SCIF1_ERI_IRQ
- make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
- make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
- make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
- make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
+ make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
+ make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
+ make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
+ make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7300)
- make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY, 0);
- make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0);
- make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0);
- make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY, 0);
+ make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY);
+ make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+ make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+ make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
#endif
#ifdef SCIF_ERI_IRQ
- make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
- make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
- make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
- make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
+ make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
+ make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
+ make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
+ make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
#endif
#ifdef IRDA_ERI_IRQ
- make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
- make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
- make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
- make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
+ make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
+ make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
+ make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
+ make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
@@ -175,12 +174,12 @@
* You should set corresponding bits of PFC to "00"
* to enable these interrupts.
*/
- make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY, 0);
- make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY, 0);
- make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY, 0);
- make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY, 0);
- make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY, 0);
- make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY, 0);
+ make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY);
+ make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY);
+ make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY);
+ make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY);
+ make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY);
+ make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY);
#endif
#endif
diff --git a/arch/sh/kernel/entry.S b/arch/sh/kernel/entry.S
index fb636815..a440d36 100644
--- a/arch/sh/kernel/entry.S
+++ b/arch/sh/kernel/entry.S
@@ -16,6 +16,7 @@
#include <linux/config.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
+#include <asm/cpu/mmu_context.h>
#include <asm/unistd.h>
#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE)
@@ -75,23 +76,6 @@
ENOSYS = 38
EINVAL = 22
-#if defined(CONFIG_CPU_SH3)
-TRA = 0xffffffd0
-EXPEVT = 0xffffffd4
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
-INTEVT = 0xa4000000 ! INTEVTE2(0xa4000000)
-#else
-INTEVT = 0xffffffd8
-#endif
-MMU_TEA = 0xfffffffc ! TLB Exception Address Register
-#elif defined(CONFIG_CPU_SH4)
-TRA = 0xff000020
-EXPEVT = 0xff000024
-INTEVT = 0xff000028
-MMU_TEA = 0xff00000c ! TLB Exception Address Register
-#endif
-
#if defined(CONFIG_KGDB_NMI)
NMI_VEC = 0x1c0 ! Must catch early for debounce
#endif
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index a4dc2b5..9fd1723 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -15,21 +15,18 @@
#include <linux/unistd.h>
#include <linux/mm.h>
#include <linux/elfcore.h>
-#include <linux/slab.h>
#include <linux/a.out.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
#include <linux/ptrace.h>
#include <linux/platform.h>
#include <linux/kallsyms.h>
+#include <linux/kexec.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
#include <asm/elf.h>
-#if defined(CONFIG_SH_HS7751RVOIP)
-#include <asm/hs7751rvoip/hs7751rvoip.h>
-#elif defined(CONFIG_SH_RTS7751R2D)
-#include <asm/rts7751r2d/rts7751r2d.h>
-#endif
static int hlt_counter=0;
@@ -37,6 +34,11 @@
#define HARD_IDLE_TIMEOUT (HZ / 3)
+void (*pm_idle)(void);
+
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
void disable_hlt(void)
{
hlt_counter++;
@@ -51,17 +53,25 @@
EXPORT_SYMBOL(enable_hlt);
+void default_idle(void)
+{
+ if (!hlt_counter)
+ cpu_sleep();
+ else
+ cpu_relax();
+}
+
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
while (1) {
- if (hlt_counter) {
- while (!need_resched())
- cpu_relax();
- } else {
- while (!need_resched())
- cpu_sleep();
- }
+ void (*idle)(void) = pm_idle;
+
+ if (!idle)
+ idle = default_idle;
+
+ while (!need_resched())
+ idle();
preempt_enable_no_resched();
schedule();
@@ -88,28 +98,16 @@
void machine_halt(void)
{
-#if defined(CONFIG_SH_HS7751RVOIP)
- unsigned short value;
+ local_irq_disable();
- value = ctrl_inw(PA_OUTPORTR);
- ctrl_outw((value & 0xffdf), PA_OUTPORTR);
-#elif defined(CONFIG_SH_RTS7751R2D)
- ctrl_outw(0x0001, PA_POWOFF);
-#endif
while (1)
cpu_sleep();
}
void machine_power_off(void)
{
-#if defined(CONFIG_SH_HS7751RVOIP)
- unsigned short value;
-
- value = ctrl_inw(PA_OUTPORTR);
- ctrl_outw((value & 0xffdf), PA_OUTPORTR);
-#elif defined(CONFIG_SH_RTS7751R2D)
- ctrl_outw(0x0001, PA_POWOFF);
-#endif
+ if (pm_power_off)
+ pm_power_off();
}
void show_regs(struct pt_regs * regs)
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 036050b..a067a34 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -22,10 +22,10 @@
#include <linux/cpu.h>
#include <asm/uaccess.h>
#include <asm/io.h>
-#include <asm/io_generic.h>
#include <asm/sections.h>
#include <asm/irq.h>
#include <asm/setup.h>
+#include <asm/clock.h>
#ifdef CONFIG_SH_KGDB
#include <asm/kgdb.h>
@@ -41,7 +41,7 @@
* This value will be used at the very early stage of serial setup.
* The bigger value means no problem.
*/
-struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 0, 10000000, };
+struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, };
struct screen_info screen_info;
#if defined(CONFIG_SH_UNKNOWN)
@@ -186,7 +186,7 @@
static int __init sh_mv_setup(char **cmdline_p)
{
-#if defined(CONFIG_SH_UNKNOWN)
+#ifdef CONFIG_SH_UNKNOWN
extern struct sh_machine_vector mv_unknown;
#endif
struct sh_machine_vector *mv = NULL;
@@ -196,7 +196,7 @@
parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base, &mv_mmio_enable);
-#ifdef CONFIG_SH_GENERIC
+#ifdef CONFIG_SH_UNKNOWN
if (mv == NULL) {
mv = &mv_unknown;
if (*mv_name != '\0') {
@@ -206,9 +206,6 @@
}
sh_mv = *mv;
#endif
-#ifdef CONFIG_SH_UNKNOWN
- sh_mv = mv_unknown;
-#endif
/*
* Manually walk the vec, fill in anything that the board hasn't yet
@@ -231,10 +228,8 @@
mv_set(readb); mv_set(readw); mv_set(readl);
mv_set(writeb); mv_set(writew); mv_set(writel);
- mv_set(ioremap);
- mv_set(iounmap);
-
- mv_set(isa_port2addr);
+ mv_set(ioport_map);
+ mv_set(ioport_unmap);
mv_set(irq_demux);
#ifdef CONFIG_SH_UNKNOWN
@@ -273,10 +268,10 @@
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = (unsigned long) _end;
- code_resource.start = virt_to_bus(_text);
- code_resource.end = virt_to_bus(_etext)-1;
- data_resource.start = virt_to_bus(_etext);
- data_resource.end = virt_to_bus(_edata)-1;
+ code_resource.start = (unsigned long)virt_to_phys(_text);
+ code_resource.end = (unsigned long)virt_to_phys(_etext)-1;
+ data_resource.start = (unsigned long)virt_to_phys(_etext);
+ data_resource.end = (unsigned long)virt_to_phys(_edata)-1;
sh_mv_setup(cmdline_p);
@@ -435,6 +430,9 @@
[CPU_ST40GX1] = "ST40GX1",
[CPU_SH4_202] = "SH4-202",
[CPU_SH4_501] = "SH4-501",
+ [CPU_SH7770] = "SH7770",
+ [CPU_SH7780] = "SH7780",
+ [CPU_SH7781] = "SH7781",
[CPU_SH_NONE] = "Unknown"
};
@@ -445,7 +443,7 @@
#ifdef CONFIG_PROC_FS
static const char *cpu_flags[] = {
- "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
+ "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", "ptea", NULL
};
static void show_cpuflags(struct seq_file *m)
@@ -459,7 +457,7 @@
return;
}
- for (i = 0; i < cpu_data->flags; i++)
+ for (i = 0; cpu_flags[i]; i++)
if ((cpu_data->flags & (1 << i)))
seq_printf(m, " %s", cpu_flags[i+1]);
@@ -472,7 +470,8 @@
cache_size = info.ways * info.sets * info.linesz;
- seq_printf(m, "%s size\t: %dKiB\n", type, cache_size >> 10);
+ seq_printf(m, "%s size\t: %2dKiB (%d-way)\n",
+ type, cache_size >> 10, info.ways);
}
/*
@@ -511,21 +510,9 @@
boot_cpu_data.loops_per_jiffy/(500000/HZ),
(boot_cpu_data.loops_per_jiffy/(5000/HZ)) % 100);
-#define PRINT_CLOCK(name, value) \
- seq_printf(m, name " clock\t: %d.%02dMHz\n", \
- ((value) / 1000000), ((value) % 1000000)/10000)
-
- PRINT_CLOCK("cpu", boot_cpu_data.cpu_clock);
- PRINT_CLOCK("bus", boot_cpu_data.bus_clock);
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
- PRINT_CLOCK("memory", boot_cpu_data.memory_clock);
-#endif
- PRINT_CLOCK("module", boot_cpu_data.module_clock);
-
- return 0;
+ return show_clocks(m);
}
-
static void *c_start(struct seq_file *m, loff_t *pos)
{
return *pos < NR_CPUS ? cpu_data + *pos : NULL;
@@ -596,7 +583,7 @@
options += map->namelen + 1;
options = (*options == ',') ? options+1 : options;
-
+
/* Read optional parameters (baud/parity/bits) */
baud = simple_strtoul(options, &options, 10);
if (baud != 0) {
diff --git a/arch/sh64/kernel/sh_ksyms.c b/arch/sh64/kernel/sh_ksyms.c
index 472b450..de29c45 100644
--- a/arch/sh64/kernel/sh_ksyms.c
+++ b/arch/sh64/kernel/sh_ksyms.c
@@ -31,14 +31,6 @@
extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
-#if 0
-/* Not yet - there's no declaration of drive_info anywhere. */
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE)
-extern struct drive_info_struct drive_info;
-EXPORT_SYMBOL(drive_info);
-#endif
-#endif
-
/* platform dependent support */
EXPORT_SYMBOL(dump_fpu);
EXPORT_SYMBOL(iounmap);
diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c
index 1195af3..0773c9f 100644
--- a/arch/sh64/kernel/time.c
+++ b/arch/sh64/kernel/time.c
@@ -29,6 +29,7 @@
#include <linux/init.h>
#include <linux/profile.h>
#include <linux/smp.h>
+#include <linux/module.h>
#include <asm/registers.h> /* required by inline __asm__ stmt. */
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index c51d08d..887f6a1 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -38,7 +38,7 @@
#define curptr g6
-#define NR_SYSCALLS 284 /* Each OS is different... */
+#define NR_SYSCALLS 300 /* Each OS is different... */
/* These are just handy. */
#define _SV save %sp, -STACKFRAME_SZ, %sp
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
index fbb05a4..118cac8 100644
--- a/arch/sparc/kernel/process.c
+++ b/arch/sparc/kernel/process.c
@@ -54,7 +54,7 @@
* This is done via auxio, but could be used as a fallback
* handler when auxio is not present-- unused for now...
*/
-void (*pm_power_off)(void);
+void (*pm_power_off)(void) = machine_power_off;
/*
* sysctl - toggle power-off restriction for serial console
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index 6877ae4..c031470 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -78,7 +78,7 @@
/*280*/ .long sys_ni_syscall, sys_add_key, sys_request_key, sys_keyctl, sys_openat
/*285*/ .long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_newfstatat
/*290*/ .long sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
-/*295*/ .long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll
+/*295*/ .long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
#ifdef CONFIG_SUNOS_EMUL
/* Now the SunOS syscall table. */
@@ -190,5 +190,6 @@
/*290*/ .long sunos_nosys, sunos_nosys, sunos_nosys
.long sunos_nosys, sunos_nosys, sunos_nosys
.long sunos_nosys, sunos_nosys, sunos_nosys
+ .long sunos_nosys
#endif
diff --git a/arch/sparc/math-emu/math.c b/arch/sparc/math-emu/math.c
index be2c809..8613b3e 100644
--- a/arch/sparc/math-emu/math.c
+++ b/arch/sparc/math-emu/math.c
@@ -323,11 +323,6 @@
case FMOVS:
case FABSS:
case FNEGS: TYPE(2,1,0,1,0,0,0); break;
- default:
-#ifdef DEBUG_MATHEMU
- printk("unknown FPop1: %03lx\n",(insn>>5)&0x1ff);
-#endif
- break;
}
} else if ((insn & 0xc1f80000) == 0x81a80000) /* FPOP2 */ {
switch ((insn >> 5) & 0x1ff) {
@@ -337,11 +332,6 @@
case FCMPED: TYPE(3,0,0,2,1,2,1); break;
case FCMPQ: TYPE(3,0,0,3,1,3,1); break;
case FCMPEQ: TYPE(3,0,0,3,1,3,1); break;
- default:
-#ifdef DEBUG_MATHEMU
- printk("unknown FPop2: %03lx\n",(insn>>5)&0x1ff);
-#endif
- break;
}
}
diff --git a/arch/sparc64/boot/.gitignore b/arch/sparc64/boot/.gitignore
new file mode 100644
index 0000000..36356f9
--- /dev/null
+++ b/arch/sparc64/boot/.gitignore
@@ -0,0 +1,4 @@
+image
+tftpboot.img
+vmlinux.aout
+piggyback
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index 9ceddad..069d497 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Wed Jan 18 13:41:02 2006
+# Linux kernel version: 2.6.16-rc2
+# Tue Feb 7 17:47:18 2006
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
@@ -23,7 +23,6 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -31,7 +30,7 @@
# General setup
#
CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -155,6 +154,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -224,6 +224,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
@@ -233,11 +238,6 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -657,6 +657,7 @@
CONFIG_SERIAL_SUNSAB=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
@@ -765,6 +766,7 @@
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
@@ -1118,6 +1120,10 @@
#
#
+# EDAC - error detection and reporting (RAS)
+#
+
+#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=m
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S
index e50e56e..a73553a 100644
--- a/arch/sparc64/kernel/entry.S
+++ b/arch/sparc64/kernel/entry.S
@@ -25,7 +25,7 @@
#define curptr g6
-#define NR_SYSCALLS 284 /* Each OS is different... */
+#define NR_SYSCALLS 300 /* Each OS is different... */
.text
.align 32
diff --git a/arch/sparc64/kernel/sys32.S b/arch/sparc64/kernel/sys32.S
index 9cd272a..60b5937 100644
--- a/arch/sparc64/kernel/sys32.S
+++ b/arch/sparc64/kernel/sys32.S
@@ -84,7 +84,6 @@
SIGN2(sys32_bdflush, sys_bdflush, %o0, %o1)
SIGN1(sys32_mlockall, sys_mlockall, %o0)
SIGN1(sys32_nfsservctl, compat_sys_nfsservctl, %o0)
-SIGN1(sys32_clock_settime, compat_sys_clock_settime, %o1)
SIGN1(sys32_clock_nanosleep, compat_sys_clock_nanosleep, %o1)
SIGN1(sys32_timer_settime, compat_sys_timer_settime, %o1)
SIGN1(sys32_io_submit, compat_sys_io_submit, %o1)
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index bf0fc5b..5928b3c 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -71,7 +71,7 @@
/*240*/ .word sys_munlockall, sys32_sched_setparam, sys32_sched_getparam, sys32_sched_setscheduler, sys32_sched_getscheduler
.word sys_sched_yield, sys32_sched_get_priority_max, sys32_sched_get_priority_min, sys32_sched_rr_get_interval, compat_sys_nanosleep
/*250*/ .word sys32_mremap, sys32_sysctl, sys32_getsid, sys_fdatasync, sys32_nfsservctl
- .word sys_ni_syscall, sys32_clock_settime, compat_sys_clock_gettime, compat_sys_clock_getres, sys32_clock_nanosleep
+ .word sys_ni_syscall, compat_sys_clock_settime, compat_sys_clock_gettime, compat_sys_clock_getres, sys32_clock_nanosleep
/*260*/ .word compat_sys_sched_getaffinity, compat_sys_sched_setaffinity, sys32_timer_settime, compat_sys_timer_gettime, sys_timer_getoverrun
.word sys_timer_delete, compat_sys_timer_create, sys_ni_syscall, compat_sys_io_setup, sys_io_destroy
/*270*/ .word sys32_io_submit, sys_io_cancel, compat_sys_io_getevents, sys32_mq_open, sys_mq_unlink
@@ -79,7 +79,7 @@
/*280*/ .word sys_ni_syscall, sys_add_key, sys_request_key, sys_keyctl, compat_sys_openat
.word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_newfstatat
/*285*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
- .word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll
+ .word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare
#endif /* CONFIG_COMPAT */
@@ -148,7 +148,7 @@
/*280*/ .word sys_nis_syscall, sys_add_key, sys_request_key, sys_keyctl, sys_openat
.word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, compat_sys_newfstatat
/*285*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
- .word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll
+ .word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
#if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \
defined(CONFIG_SOLARIS_EMUL_MODULE)
@@ -261,4 +261,5 @@
/*290*/ .word sunos_nosys, sunos_nosys, sunos_nosys
.word sunos_nosys, sunos_nosys, sunos_nosys
.word sunos_nosys, sunos_nosys, sunos_nosys
+ .word sunos_nosys
#endif
diff --git a/arch/sparc64/solaris/systbl.S b/arch/sparc64/solaris/systbl.S
index d25667e..7043ca1 100644
--- a/arch/sparc64/solaris/systbl.S
+++ b/arch/sparc64/solaris/systbl.S
@@ -283,32 +283,3 @@
.word solaris_unimplemented /* 253 */
.word solaris_unimplemented /* 254 */
.word solaris_unimplemented /* 255 */
- .word solaris_unimplemented /* 256 */
- .word solaris_unimplemented /* 257 */
- .word solaris_unimplemented /* 258 */
- .word solaris_unimplemented /* 259 */
- .word solaris_unimplemented /* 260 */
- .word solaris_unimplemented /* 261 */
- .word solaris_unimplemented /* 262 */
- .word solaris_unimplemented /* 263 */
- .word solaris_unimplemented /* 264 */
- .word solaris_unimplemented /* 265 */
- .word solaris_unimplemented /* 266 */
- .word solaris_unimplemented /* 267 */
- .word solaris_unimplemented /* 268 */
- .word solaris_unimplemented /* 269 */
- .word solaris_unimplemented /* 270 */
- .word solaris_unimplemented /* 271 */
- .word solaris_unimplemented /* 272 */
- .word solaris_unimplemented /* 273 */
- .word solaris_unimplemented /* 274 */
- .word solaris_unimplemented /* 275 */
- .word solaris_unimplemented /* 276 */
- .word solaris_unimplemented /* 277 */
- .word solaris_unimplemented /* 278 */
- .word solaris_unimplemented /* 279 */
- .word solaris_unimplemented /* 280 */
- .word solaris_unimplemented /* 281 */
- .word solaris_unimplemented /* 282 */
- .word solaris_unimplemented /* 283 */
-
diff --git a/arch/um/Makefile b/arch/um/Makefile
index 6430a63..c58b657 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -47,13 +47,16 @@
endif
SYS_DIR := $(ARCH_DIR)/include/sysdep-$(SUBARCH)
-# -Dvmap=kernel_vmap affects everything, and prevents anything from
-# referencing the libpcap.o symbol so named.
+# -Dvmap=kernel_vmap prevents anything from referencing the libpcap.o symbol so
+# named - it's a common symbol in libpcap, so we get a binary which crashes.
#
-# Same things for in6addr_loopback - found in libc.
+# Same things for in6addr_loopback and mktime - found in libc. For these two we
+# only get link-time error, luckily.
+#
+# These apply to USER_CFLAGS to.
-CFLAGS += $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \
- $(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap \
+CFLAGS += $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \
+ $(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap \
-Din6addr_loopback=kernel_in6addr_loopback
AFLAGS += $(ARCH_INCLUDE)
@@ -66,6 +69,7 @@
# kernel_errno to separate them from the libc errno. This allows -fno-common
# in CFLAGS. Otherwise, it would cause ld to complain about the two different
# errnos.
+# These apply to kernelspace only.
CFLAGS += -Derrno=kernel_errno -Dsigprocmask=kernel_sigprocmask \
-Dmktime=kernel_mktime
@@ -168,10 +172,13 @@
$(Q)cd $(TOPDIR)/include/asm-um && ln -sf ../asm-$(SUBARCH) arch
endif
-$(ARCH_DIR)/include/sysdep:
+$(objtree)/$(ARCH_DIR)/include:
+ @echo ' MKDIR $@'
+ $(Q)mkdir -p $@
+
+$(ARCH_DIR)/include/sysdep: $(objtree)/$(ARCH_DIR)/include
@echo ' SYMLINK $@'
ifneq ($(KBUILD_SRC),)
- $(Q)mkdir -p $(ARCH_DIR)/include
$(Q)ln -fsn $(srctree)/$(ARCH_DIR)/include/sysdep-$(SUBARCH) $(ARCH_DIR)/include/sysdep
else
$(Q)cd $(ARCH_DIR)/include && ln -sf sysdep-$(SUBARCH) sysdep
@@ -214,7 +221,7 @@
CLEAN_FILES += $(ARCH_DIR)/user-offsets.s
-$(ARCH_DIR)/include/kern_constants.h:
+$(ARCH_DIR)/include/kern_constants.h: $(objtree)/$(ARCH_DIR)/include
@echo ' SYMLINK $@'
$(Q) ln -sf ../../../include/asm-um/asm-offsets.h $@
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index ab0d0b1..7218c75 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -403,7 +403,7 @@
return 0;
}
-void free_one_chan(struct chan *chan, int delay_free_irq)
+static void free_one_chan(struct chan *chan, int delay_free_irq)
{
list_del(&chan->list);
@@ -416,7 +416,7 @@
kfree(chan);
}
-void free_chan(struct list_head *chans, int delay_free_irq)
+static void free_chan(struct list_head *chans, int delay_free_irq)
{
struct list_head *ele, *next;
struct chan *chan;
@@ -497,7 +497,7 @@
struct chan_ops *ops;
};
-struct chan_type chan_table[] = {
+static struct chan_type chan_table[] = {
{ "fd", &fd_ops },
#ifdef CONFIG_NULL_CHAN
diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c
index 5d50d4a..2f880cb 100644
--- a/arch/um/drivers/chan_user.c
+++ b/arch/um/drivers/chan_user.c
@@ -9,6 +9,7 @@
#include <termios.h>
#include <string.h>
#include <signal.h>
+#include <sched.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
@@ -73,7 +74,6 @@
struct winch_data {
int pty_fd;
int pipe_fd;
- int close_me;
};
static int winch_thread(void *arg)
@@ -84,7 +84,6 @@
int count, err;
char c = 1;
- os_close_file(data->close_me);
pty_fd = data->pty_fd;
pipe_fd = data->pipe_fd;
count = os_write_file(pipe_fd, &c, sizeof(c));
@@ -153,15 +152,16 @@
}
data = ((struct winch_data) { .pty_fd = fd,
- .pipe_fd = fds[1],
- .close_me = fds[0] } );
- err = run_helper_thread(winch_thread, &data, 0, &stack, 0);
+ .pipe_fd = fds[1] } );
+ /* CLONE_FILES so this thread doesn't hold open files which are open
+ * now, but later closed. This is a problem with /dev/net/tun.
+ */
+ err = run_helper_thread(winch_thread, &data, CLONE_FILES, &stack, 0);
if(err < 0){
printk("fork of winch_thread failed - errno = %d\n", errno);
goto out_close;
}
- os_close_file(fds[1]);
*fd_out = fds[0];
n = os_read_file(fds[0], &c, sizeof(c));
if(n != sizeof(c)){
@@ -169,13 +169,12 @@
printk("read failed, err = %d\n", -n);
printk("fd %d will not support SIGWINCH\n", fd);
err = -EINVAL;
- goto out_close1;
+ goto out_close;
}
return err ;
out_close:
os_close_file(fds[1]);
- out_close1:
os_close_file(fds[0]);
out:
return err;
diff --git a/arch/um/drivers/daemon_kern.c b/arch/um/drivers/daemon_kern.c
index 507e3cb..a61b7b4 100644
--- a/arch/um/drivers/daemon_kern.c
+++ b/arch/um/drivers/daemon_kern.c
@@ -18,7 +18,7 @@
char *ctl_sock;
};
-void daemon_init(struct net_device *dev, void *data)
+static void daemon_init(struct net_device *dev, void *data)
{
struct uml_net_private *pri;
struct daemon_data *dpri;
@@ -64,7 +64,7 @@
.write = daemon_write,
};
-int daemon_setup(char *str, char **mac_out, void *data)
+static int daemon_setup(char *str, char **mac_out, void *data)
{
struct daemon_init *init = data;
char *remain;
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 46ceb25..6c2d4cc 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -714,7 +714,7 @@
struct tty_struct *tty;
};
-irqreturn_t winch_interrupt(int irq, void *data, struct pt_regs *unused)
+static irqreturn_t winch_interrupt(int irq, void *data, struct pt_regs *unused)
{
struct winch *winch = data;
struct tty_struct *tty;
diff --git a/arch/um/drivers/mcast_kern.c b/arch/um/drivers/mcast_kern.c
index 217438c..c9b078f 100644
--- a/arch/um/drivers/mcast_kern.c
+++ b/arch/um/drivers/mcast_kern.c
@@ -26,7 +26,7 @@
int ttl;
};
-void mcast_init(struct net_device *dev, void *data)
+static void mcast_init(struct net_device *dev, void *data)
{
struct uml_net_private *pri;
struct mcast_data *dpri;
@@ -40,7 +40,7 @@
dpri->dev = dev;
printk("mcast backend ");
- printk("multicast adddress: %s:%u, TTL:%u ",
+ printk("multicast address: %s:%u, TTL:%u ",
dpri->addr, dpri->port, dpri->ttl);
printk("\n");
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index e3d5765..54388d1 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -273,7 +273,7 @@
config <dev> - Query the configuration of a device \n\
remove <dev> - Remove a device from UML \n\
sysrq <letter> - Performs the SysRq action controlled by the letter \n\
- cad - invoke the Ctl-Alt-Del handler \n\
+ cad - invoke the Ctrl-Alt-Del handler \n\
stop - pause the UML; it will do nothing until it receives a 'go' \n\
go - continue the UML after a 'stop' \n\
log <string> - make UML enter <string> into the kernel log\n\
@@ -327,7 +327,7 @@
/* This list is populated by __initcall routines. */
-LIST_HEAD(mconsole_devices);
+static LIST_HEAD(mconsole_devices);
void mconsole_register_dev(struct mc_device *new)
{
@@ -561,6 +561,8 @@
}
#endif
+#ifdef CONFIG_MODE_SKAS
+
static void stack_proc(void *arg)
{
struct task_struct *from = current, *to = arg;
@@ -574,7 +576,7 @@
* Dumps a stacks registers to the linux console.
* Usage stack <pid>.
*/
-void do_stack(struct mc_request *req)
+static void do_stack_trace(struct mc_request *req)
{
char *ptr = req->request.data;
int pid_requested= -1;
@@ -605,6 +607,7 @@
}
with_console(req, stack_proc, to);
}
+#endif /* CONFIG_MODE_SKAS */
void mconsole_stack(struct mc_request *req)
{
@@ -613,7 +616,7 @@
*/
CHOOSE_MODE(mconsole_reply(req, "Sorry, this doesn't work in TT mode",
1, 0),
- do_stack(req));
+ do_stack_trace(req));
}
/* Changed by mconsole_setup, which is __setup, and called before SMP is
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 8ebb224..8c7279b 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -131,9 +131,8 @@
SA_INTERRUPT | SA_SHIRQ, dev->name, dev);
if(err != 0){
printk(KERN_ERR "uml_net_open: failed to get irq(%d)\n", err);
- if(lp->close != NULL) (*lp->close)(lp->fd, &lp->user);
- lp->fd = -1;
err = -ENETUNREACH;
+ goto out_close;
}
lp->tl.data = (unsigned long) &lp->user;
@@ -145,9 +144,19 @@
*/
while((err = uml_net_rx(dev)) > 0) ;
- out:
spin_unlock(&lp->lock);
- return(err);
+
+ spin_lock(&opened_lock);
+ list_add(&lp->list, &opened);
+ spin_unlock(&opened_lock);
+
+ return 0;
+out_close:
+ if(lp->close != NULL) (*lp->close)(lp->fd, &lp->user);
+ lp->fd = -1;
+out:
+ spin_unlock(&lp->lock);
+ return err;
}
static int uml_net_close(struct net_device *dev)
@@ -161,9 +170,13 @@
if(lp->close != NULL)
(*lp->close)(lp->fd, &lp->user);
lp->fd = -1;
- list_del(&lp->list);
spin_unlock(&lp->lock);
+
+ spin_lock(&opened_lock);
+ list_del(&lp->list);
+ spin_unlock(&opened_lock);
+
return 0;
}
@@ -410,11 +423,7 @@
if (device->have_mac)
set_ether_mac(dev, device->mac);
- spin_lock(&opened_lock);
- list_add(&lp->list, &opened);
- spin_unlock(&opened_lock);
-
- return(0);
+ return 0;
}
static struct uml_net *find_device(int n)
diff --git a/arch/um/drivers/slip_common.h b/arch/um/drivers/slip_common.h
index 2ae76d8..d574e0a 100644
--- a/arch/um/drivers/slip_common.h
+++ b/arch/um/drivers/slip_common.h
@@ -88,12 +88,13 @@
int esc;
};
-#define SLIP_PROTO_INIT { \
- .ibuf = { '\0' }, \
- .obuf = { '\0' }, \
- .more = 0, \
- .pos = 0, \
- .esc = 0 \
+static inline void slip_proto_init(struct slip_proto * slip)
+{
+ memset(slip->ibuf, 0, sizeof(slip->ibuf));
+ memset(slip->obuf, 0, sizeof(slip->obuf));
+ slip->more = 0;
+ slip->pos = 0;
+ slip->esc = 0;
}
extern int slip_proto_read(int fd, void *buf, int len,
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index 9a6f5c8..a62f5ef 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -21,13 +21,14 @@
private = dev->priv;
spri = (struct slip_data *) private->user;
- *spri = ((struct slip_data)
- { .name = { '\0' },
- .addr = NULL,
- .gate_addr = init->gate_addr,
- .slave = -1,
- .slip = SLIP_PROTO_INIT,
- .dev = dev });
+
+ memset(spri->name, 0, sizeof(spri->name));
+ spri->addr = NULL;
+ spri->gate_addr = init->gate_addr;
+ spri->slave = -1;
+ spri->dev = dev;
+
+ slip_proto_init(&spri->slip);
dev->init = NULL;
dev->header_cache_update = NULL;
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index 9864d27..33d7982 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -21,12 +21,13 @@
private = dev->priv;
spri = (struct slirp_data *) private->user;
- *spri = ((struct slirp_data)
- { .argw = init->argw,
- .pid = -1,
- .slave = -1,
- .slip = SLIP_PROTO_INIT,
- .dev = dev });
+
+ spri->argw = init->argw;
+ spri->pid = -1;
+ spri->slave = -1;
+ spri->dev = dev;
+
+ slip_proto_init(&spri->slip);
dev->init = NULL;
dev->hard_header_len = 0;
diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c
index a32ef55..a4d6415 100644
--- a/arch/um/drivers/ssl.c
+++ b/arch/um/drivers/ssl.c
@@ -33,7 +33,7 @@
#define NR_PORTS 64
-void ssl_announce(char *dev_name, int dev)
+static void ssl_announce(char *dev_name, int dev)
{
printk(KERN_INFO "Serial line %d assigned device '%s'\n", dev,
dev_name);
@@ -98,7 +98,7 @@
return line_remove(serial_lines, ARRAY_SIZE(serial_lines), n);
}
-int ssl_open(struct tty_struct *tty, struct file *filp)
+static int ssl_open(struct tty_struct *tty, struct file *filp)
{
return line_open(serial_lines, tty);
}
@@ -182,7 +182,7 @@
.index = -1,
};
-int ssl_init(void)
+static int ssl_init(void)
{
char *new_title;
diff --git a/arch/um/include/kern_util.h b/arch/um/include/kern_util.h
index c649108..07176d9 100644
--- a/arch/um/include/kern_util.h
+++ b/arch/um/include/kern_util.h
@@ -31,8 +31,6 @@
extern int jail;
extern int nsyscalls;
-extern struct task_struct *idle_threads[NR_CPUS];
-
#define UML_ROUND_DOWN(addr) ((void *)(((unsigned long) addr) & PAGE_MASK))
#define UML_ROUND_UP(addr) \
UML_ROUND_DOWN(((unsigned long) addr) + PAGE_SIZE - 1)
diff --git a/arch/um/include/registers.h b/arch/um/include/registers.h
index 4892e5f..83b688c 100644
--- a/arch/um/include/registers.h
+++ b/arch/um/include/registers.h
@@ -14,7 +14,7 @@
extern void save_registers(int pid, union uml_pt_regs *regs);
extern void restore_registers(int pid, union uml_pt_regs *regs);
extern void init_registers(int pid);
-extern void get_safe_registers(unsigned long * regs);
+extern void get_safe_registers(unsigned long * regs, unsigned long * fp_regs);
extern void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer);
#endif
diff --git a/arch/um/kernel/exec_kern.c b/arch/um/kernel/exec_kern.c
index 569fe8b..c264e1c 100644
--- a/arch/um/kernel/exec_kern.c
+++ b/arch/um/kernel/exec_kern.c
@@ -33,7 +33,7 @@
extern void log_exec(char **argv, void *tty);
static long execve1(char *file, char __user * __user *argv,
- char *__user __user *env)
+ char __user *__user *env)
{
long error;
diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index f3b583a..544665e 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -265,7 +265,7 @@
highmem_len = highmem_pages * sizeof(struct page);
total_pages = phys_pages + iomem_pages + highmem_pages;
- total_len = phys_len + iomem_pages + highmem_len;
+ total_len = phys_len + iomem_len + highmem_len;
if(kmalloc_ok){
map = kmalloc(total_len, GFP_KERNEL);
diff --git a/arch/um/kernel/reboot.c b/arch/um/kernel/reboot.c
index 6f1a3a2..3ef73bf 100644
--- a/arch/um/kernel/reboot.c
+++ b/arch/um/kernel/reboot.c
@@ -5,6 +5,7 @@
#include "linux/module.h"
#include "linux/sched.h"
+#include "asm/smp.h"
#include "user_util.h"
#include "kern_util.h"
#include "kern.h"
diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c
deleted file mode 100644
index eea1c9c4..0000000
--- a/arch/um/kernel/skas/process.c
+++ /dev/null
@@ -1,569 +0,0 @@
-/*
- * Copyright (C) 2002- 2004 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include <signal.h>
-#include <setjmp.h>
-#include <sched.h>
-#include <sys/wait.h>
-#include <sys/mman.h>
-#include <sys/user.h>
-#include <sys/time.h>
-#include <asm/unistd.h>
-#include <asm/types.h>
-#include "user.h"
-#include "ptrace_user.h"
-#include "sysdep/ptrace.h"
-#include "user_util.h"
-#include "kern_util.h"
-#include "skas.h"
-#include "stub-data.h"
-#include "mm_id.h"
-#include "sysdep/sigcontext.h"
-#include "sysdep/stub.h"
-#include "os.h"
-#include "proc_mm.h"
-#include "skas_ptrace.h"
-#include "chan_user.h"
-#include "registers.h"
-#include "mem.h"
-#include "uml-config.h"
-#include "process.h"
-
-int is_skas_winch(int pid, int fd, void *data)
-{
- if(pid != os_getpgrp())
- return(0);
-
- register_winch_irq(-1, fd, -1, data);
- return(1);
-}
-
-void wait_stub_done(int pid, int sig, char * fname)
-{
- int n, status, err;
-
- do {
- if ( sig != -1 ) {
- err = ptrace(PTRACE_CONT, pid, 0, sig);
- if(err)
- panic("%s : continue failed, errno = %d\n",
- fname, errno);
- }
- sig = 0;
-
- CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
- } while((n >= 0) && WIFSTOPPED(status) &&
- ((WSTOPSIG(status) == SIGVTALRM) ||
- /* running UML inside a detached screen can cause
- * SIGWINCHes
- */
- (WSTOPSIG(status) == SIGWINCH)));
-
- if((n < 0) || !WIFSTOPPED(status) ||
- (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){
- unsigned long regs[HOST_FRAME_SIZE];
- if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
- printk("Failed to get registers from stub, "
- "errno = %d\n", errno);
- else {
- int i;
-
- printk("Stub registers -\n");
- for(i = 0; i < HOST_FRAME_SIZE; i++)
- printk("\t%d - %lx\n", i, regs[i]);
- }
- panic("%s : failed to wait for SIGUSR1/SIGTRAP, "
- "pid = %d, n = %d, errno = %d, status = 0x%x\n",
- fname, pid, n, errno, status);
- }
-}
-
-void get_skas_faultinfo(int pid, struct faultinfo * fi)
-{
- int err;
-
- if(ptrace_faultinfo){
- err = ptrace(PTRACE_FAULTINFO, pid, 0, fi);
- if(err)
- panic("get_skas_faultinfo - PTRACE_FAULTINFO failed, "
- "errno = %d\n", errno);
-
- /* Special handling for i386, which has different structs */
- if (sizeof(struct ptrace_faultinfo) < sizeof(struct faultinfo))
- memset((char *)fi + sizeof(struct ptrace_faultinfo), 0,
- sizeof(struct faultinfo) -
- sizeof(struct ptrace_faultinfo));
- }
- else {
- wait_stub_done(pid, SIGSEGV, "get_skas_faultinfo");
-
- /* faultinfo is prepared by the stub-segv-handler at start of
- * the stub stack page. We just have to copy it.
- */
- memcpy(fi, (void *)current_stub_stack(), sizeof(*fi));
- }
-}
-
-static void handle_segv(int pid, union uml_pt_regs * regs)
-{
- get_skas_faultinfo(pid, ®s->skas.faultinfo);
- segv(regs->skas.faultinfo, 0, 1, NULL);
-}
-
-/*To use the same value of using_sysemu as the caller, ask it that value (in local_using_sysemu)*/
-static void handle_trap(int pid, union uml_pt_regs *regs, int local_using_sysemu)
-{
- int err, status;
-
- /* Mark this as a syscall */
- UPT_SYSCALL_NR(regs) = PT_SYSCALL_NR(regs->skas.regs);
-
- if (!local_using_sysemu)
- {
- err = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_NR_OFFSET, __NR_getpid);
- if(err < 0)
- panic("handle_trap - nullifying syscall failed errno = %d\n",
- errno);
-
- err = ptrace(PTRACE_SYSCALL, pid, 0, 0);
- if(err < 0)
- panic("handle_trap - continuing to end of syscall failed, "
- "errno = %d\n", errno);
-
- CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
- if((err < 0) || !WIFSTOPPED(status) ||
- (WSTOPSIG(status) != SIGTRAP + 0x80))
- panic("handle_trap - failed to wait at end of syscall, "
- "errno = %d, status = %d\n", errno, status);
- }
-
- handle_syscall(regs);
-}
-
-extern int __syscall_stub_start;
-int stub_code_fd = -1;
-__u64 stub_code_offset;
-
-static int userspace_tramp(void *stack)
-{
- void *addr;
-
- ptrace(PTRACE_TRACEME, 0, 0, 0);
-
- init_new_thread_signals(1);
- enable_timer();
-
- if(!proc_mm){
- /* This has a pte, but it can't be mapped in with the usual
- * tlb_flush mechanism because this is part of that mechanism
- */
- addr = mmap64((void *) UML_CONFIG_STUB_CODE, page_size(),
- PROT_EXEC, MAP_FIXED | MAP_PRIVATE,
- stub_code_fd, stub_code_offset);
- if(addr == MAP_FAILED){
- printk("mapping stub code failed, errno = %d\n",
- errno);
- exit(1);
- }
-
- if(stack != NULL){
- int fd;
- __u64 offset;
-
- fd = phys_mapping(to_phys(stack), &offset);
- addr = mmap((void *) UML_CONFIG_STUB_DATA, page_size(),
- PROT_READ | PROT_WRITE,
- MAP_FIXED | MAP_SHARED, fd, offset);
- if(addr == MAP_FAILED){
- printk("mapping stub stack failed, "
- "errno = %d\n", errno);
- exit(1);
- }
- }
- }
- if(!ptrace_faultinfo){
- unsigned long v = UML_CONFIG_STUB_CODE +
- (unsigned long) stub_segv_handler -
- (unsigned long) &__syscall_stub_start;
-
- set_sigstack((void *) UML_CONFIG_STUB_DATA, page_size());
- set_handler(SIGSEGV, (void *) v, SA_ONSTACK,
- SIGIO, SIGWINCH, SIGALRM, SIGVTALRM,
- SIGUSR1, -1);
- }
-
- os_stop_process(os_getpid());
- return(0);
-}
-
-/* Each element set once, and only accessed by a single processor anyway */
-#undef NR_CPUS
-#define NR_CPUS 1
-int userspace_pid[NR_CPUS];
-
-int start_userspace(unsigned long stub_stack)
-{
- void *stack;
- unsigned long sp;
- int pid, status, n, flags;
-
- if ( stub_code_fd == -1 )
- stub_code_fd = phys_mapping(to_phys(&__syscall_stub_start),
- &stub_code_offset);
-
- stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC,
- MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- if(stack == MAP_FAILED)
- panic("start_userspace : mmap failed, errno = %d", errno);
- sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *);
-
- flags = CLONE_FILES | SIGCHLD;
- if(proc_mm) flags |= CLONE_VM;
- pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack);
- if(pid < 0)
- panic("start_userspace : clone failed, errno = %d", errno);
-
- do {
- CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
- if(n < 0)
- panic("start_userspace : wait failed, errno = %d",
- errno);
- } while(WIFSTOPPED(status) && (WSTOPSIG(status) == SIGVTALRM));
-
- if(!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP))
- panic("start_userspace : expected SIGSTOP, got status = %d",
- status);
-
- if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL, (void *)PTRACE_O_TRACESYSGOOD) < 0)
- panic("start_userspace : PTRACE_SETOPTIONS failed, errno=%d\n",
- errno);
-
- if(munmap(stack, PAGE_SIZE) < 0)
- panic("start_userspace : munmap failed, errno = %d\n", errno);
-
- return(pid);
-}
-
-void userspace(union uml_pt_regs *regs)
-{
- int err, status, op, pid = userspace_pid[0];
- int local_using_sysemu; /*To prevent races if using_sysemu changes under us.*/
-
- while(1){
- restore_registers(pid, regs);
-
- /* Now we set local_using_sysemu to be used for one loop */
- local_using_sysemu = get_using_sysemu();
-
- op = SELECT_PTRACE_OPERATION(local_using_sysemu, singlestepping(NULL));
-
- err = ptrace(op, pid, 0, 0);
- if(err)
- panic("userspace - could not resume userspace process, "
- "pid=%d, ptrace operation = %d, errno = %d\n",
- op, errno);
-
- CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
- if(err < 0)
- panic("userspace - waitpid failed, errno = %d\n",
- errno);
-
- regs->skas.is_user = 1;
- save_registers(pid, regs);
- UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */
-
- if(WIFSTOPPED(status)){
- switch(WSTOPSIG(status)){
- case SIGSEGV:
- if(PTRACE_FULL_FAULTINFO || !ptrace_faultinfo)
- user_signal(SIGSEGV, regs, pid);
- else handle_segv(pid, regs);
- break;
- case SIGTRAP + 0x80:
- handle_trap(pid, regs, local_using_sysemu);
- break;
- case SIGTRAP:
- relay_signal(SIGTRAP, regs);
- break;
- case SIGIO:
- case SIGVTALRM:
- case SIGILL:
- case SIGBUS:
- case SIGFPE:
- case SIGWINCH:
- user_signal(WSTOPSIG(status), regs, pid);
- break;
- default:
- printk("userspace - child stopped with signal "
- "%d\n", WSTOPSIG(status));
- }
- pid = userspace_pid[0];
- interrupt_end();
-
- /* Avoid -ERESTARTSYS handling in host */
- PT_SYSCALL_NR(regs->skas.regs) = -1;
- }
- }
-}
-#define INIT_JMP_NEW_THREAD 0
-#define INIT_JMP_REMOVE_SIGSTACK 1
-#define INIT_JMP_CALLBACK 2
-#define INIT_JMP_HALT 3
-#define INIT_JMP_REBOOT 4
-
-
-int copy_context_skas0(unsigned long new_stack, int pid)
-{
- int err;
- unsigned long regs[MAX_REG_NR];
- unsigned long current_stack = current_stub_stack();
- struct stub_data *data = (struct stub_data *) current_stack;
- struct stub_data *child_data = (struct stub_data *) new_stack;
- __u64 new_offset;
- int new_fd = phys_mapping(to_phys((void *)new_stack), &new_offset);
-
- /* prepare offset and fd of child's stack as argument for parent's
- * and child's mmap2 calls
- */
- *data = ((struct stub_data) { .offset = MMAP_OFFSET(new_offset),
- .fd = new_fd,
- .timer = ((struct itimerval)
- { { 0, 1000000 / hz() },
- { 0, 1000000 / hz() }})});
- get_safe_registers(regs);
-
- /* Set parent's instruction pointer to start of clone-stub */
- regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE +
- (unsigned long) stub_clone_handler -
- (unsigned long) &__syscall_stub_start;
- regs[REGS_SP_INDEX] = UML_CONFIG_STUB_DATA + PAGE_SIZE -
- sizeof(void *);
- err = ptrace_setregs(pid, regs);
- if(err < 0)
- panic("copy_context_skas0 : PTRACE_SETREGS failed, "
- "pid = %d, errno = %d\n", pid, errno);
-
- /* set a well known return code for detection of child write failure */
- child_data->err = 12345678;
-
- /* Wait, until parent has finished its work: read child's pid from
- * parent's stack, and check, if bad result.
- */
- wait_stub_done(pid, 0, "copy_context_skas0");
-
- pid = data->err;
- if(pid < 0)
- panic("copy_context_skas0 - stub-parent reports error %d\n",
- pid);
-
- /* Wait, until child has finished too: read child's result from
- * child's stack and check it.
- */
- wait_stub_done(pid, -1, "copy_context_skas0");
- if (child_data->err != UML_CONFIG_STUB_DATA)
- panic("copy_context_skas0 - stub-child reports error %d\n",
- child_data->err);
-
- if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL,
- (void *)PTRACE_O_TRACESYSGOOD) < 0)
- panic("copy_context_skas0 : PTRACE_SETOPTIONS failed, "
- "errno = %d\n", errno);
-
- return pid;
-}
-
-/*
- * This is used only, if stub pages are needed, while proc_mm is
- * availabl. Opening /proc/mm creates a new mm_context, which lacks
- * the stub-pages. Thus, we map them using /proc/mm-fd
- */
-void map_stub_pages(int fd, unsigned long code,
- unsigned long data, unsigned long stack)
-{
- struct proc_mm_op mmop;
- int n;
-
- mmop = ((struct proc_mm_op) { .op = MM_MMAP,
- .u =
- { .mmap =
- { .addr = code,
- .len = PAGE_SIZE,
- .prot = PROT_EXEC,
- .flags = MAP_FIXED | MAP_PRIVATE,
- .fd = stub_code_fd,
- .offset = stub_code_offset
- } } });
- n = os_write_file(fd, &mmop, sizeof(mmop));
- if(n != sizeof(mmop))
- panic("map_stub_pages : /proc/mm map for code failed, "
- "err = %d\n", -n);
-
- if ( stack ) {
- __u64 map_offset;
- int map_fd = phys_mapping(to_phys((void *)stack), &map_offset);
- mmop = ((struct proc_mm_op)
- { .op = MM_MMAP,
- .u =
- { .mmap =
- { .addr = data,
- .len = PAGE_SIZE,
- .prot = PROT_READ | PROT_WRITE,
- .flags = MAP_FIXED | MAP_SHARED,
- .fd = map_fd,
- .offset = map_offset
- } } });
- n = os_write_file(fd, &mmop, sizeof(mmop));
- if(n != sizeof(mmop))
- panic("map_stub_pages : /proc/mm map for data failed, "
- "err = %d\n", -n);
- }
-}
-
-void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr,
- void (*handler)(int))
-{
- unsigned long flags;
- sigjmp_buf switch_buf, fork_buf;
-
- *switch_buf_ptr = &switch_buf;
- *fork_buf_ptr = &fork_buf;
-
- /* Somewhat subtle - siglongjmp restores the signal mask before doing
- * the longjmp. This means that when jumping from one stack to another
- * when the target stack has interrupts enabled, an interrupt may occur
- * on the source stack. This is bad when starting up a process because
- * it's not supposed to get timer ticks until it has been scheduled.
- * So, we disable interrupts around the sigsetjmp to ensure that
- * they can't happen until we get back here where they are safe.
- */
- flags = get_signals();
- block_signals();
- if(sigsetjmp(fork_buf, 1) == 0)
- new_thread_proc(stack, handler);
-
- remove_sigstack();
-
- set_signals(flags);
-}
-
-void thread_wait(void *sw, void *fb)
-{
- sigjmp_buf buf, **switch_buf = sw, *fork_buf;
-
- *switch_buf = &buf;
- fork_buf = fb;
- if(sigsetjmp(buf, 1) == 0)
- siglongjmp(*fork_buf, INIT_JMP_REMOVE_SIGSTACK);
-}
-
-void switch_threads(void *me, void *next)
-{
- sigjmp_buf my_buf, **me_ptr = me, *next_buf = next;
-
- *me_ptr = &my_buf;
- if(sigsetjmp(my_buf, 1) == 0)
- siglongjmp(*next_buf, 1);
-}
-
-static sigjmp_buf initial_jmpbuf;
-
-/* XXX Make these percpu */
-static void (*cb_proc)(void *arg);
-static void *cb_arg;
-static sigjmp_buf *cb_back;
-
-int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr)
-{
- sigjmp_buf **switch_buf = switch_buf_ptr;
- int n;
-
- set_handler(SIGWINCH, (__sighandler_t) sig_handler,
- SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGALRM,
- SIGVTALRM, -1);
-
- *fork_buf_ptr = &initial_jmpbuf;
- n = sigsetjmp(initial_jmpbuf, 1);
- switch(n){
- case INIT_JMP_NEW_THREAD:
- new_thread_proc((void *) stack, new_thread_handler);
- break;
- case INIT_JMP_REMOVE_SIGSTACK:
- remove_sigstack();
- break;
- case INIT_JMP_CALLBACK:
- (*cb_proc)(cb_arg);
- siglongjmp(*cb_back, 1);
- break;
- case INIT_JMP_HALT:
- kmalloc_ok = 0;
- return(0);
- case INIT_JMP_REBOOT:
- kmalloc_ok = 0;
- return(1);
- default:
- panic("Bad sigsetjmp return in start_idle_thread - %d\n", n);
- }
- siglongjmp(**switch_buf, 1);
-}
-
-void initial_thread_cb_skas(void (*proc)(void *), void *arg)
-{
- sigjmp_buf here;
-
- cb_proc = proc;
- cb_arg = arg;
- cb_back = &here;
-
- block_signals();
- if(sigsetjmp(here, 1) == 0)
- siglongjmp(initial_jmpbuf, INIT_JMP_CALLBACK);
- unblock_signals();
-
- cb_proc = NULL;
- cb_arg = NULL;
- cb_back = NULL;
-}
-
-void halt_skas(void)
-{
- block_signals();
- siglongjmp(initial_jmpbuf, INIT_JMP_HALT);
-}
-
-void reboot_skas(void)
-{
- block_signals();
- siglongjmp(initial_jmpbuf, INIT_JMP_REBOOT);
-}
-
-void switch_mm_skas(struct mm_id *mm_idp)
-{
- int err;
-
-#warning need cpu pid in switch_mm_skas
- if(proc_mm){
- err = ptrace(PTRACE_SWITCH_MM, userspace_pid[0], 0,
- mm_idp->u.mm_fd);
- if(err)
- panic("switch_mm_skas - PTRACE_SWITCH_MM failed, "
- "errno = %d\n", errno);
- }
- else userspace_pid[0] = mm_idp->u.pid;
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/tt/syscall_kern.c b/arch/um/kernel/tt/syscall_kern.c
index 3d29c90..3fda9a0 100644
--- a/arch/um/kernel/tt/syscall_kern.c
+++ b/arch/um/kernel/tt/syscall_kern.c
@@ -23,16 +23,20 @@
int syscall;
#ifdef CONFIG_SYSCALL_DEBUG
int index;
- index = record_syscall_start(syscall);
#endif
sc = UPT_SC(®s->regs);
SC_START_SYSCALL(sc);
+ syscall = UPT_SYSCALL_NR(®s->regs);
+
+#ifdef CONFIG_SYSCALL_DEBUG
+ index = record_syscall_start(syscall);
+#endif
+
syscall_trace(®s->regs, 0);
current->thread.nsyscalls++;
nsyscalls++;
- syscall = UPT_SYSCALL_NR(®s->regs);
if((syscall >= NR_syscalls) || (syscall < 0))
result = -ENOSYS;
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index e2d3ca4..27cdf91 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -193,6 +193,24 @@
" root=/dev/ubd5\n\n"
);
+#ifndef CONFIG_MODE_TT
+
+static int __init no_skas_debug_setup(char *line, int *add)
+{
+ printf("'debug' is not necessary to gdb UML in skas mode - run \n");
+ printf("'gdb linux' and disable CONFIG_CMDLINE_ON_HOST if gdb \n");
+ printf("doesn't work as expected\n");
+
+ return 0;
+}
+
+__uml_setup("debug", no_skas_debug_setup,
+"debug\n"
+" this flag is not needed to run gdb on UML in skas mode\n\n"
+);
+
+#endif
+
#ifdef CONFIG_SMP
static int __init uml_ncpus_setup(char *line, int *add)
{
diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c
index 5294533..87c3aa0 100644
--- a/arch/um/os-Linux/drivers/tuntap_user.c
+++ b/arch/um/os-Linux/drivers/tuntap_user.c
@@ -122,6 +122,7 @@
return(-EINVAL);
}
*fd_out = ((int *) CMSG_DATA(cmsg))[0];
+ os_set_exec_close(*fd_out, 1);
return(0);
}
@@ -137,7 +138,8 @@
return(err);
if(pri->fixed_config){
- pri->fd = os_open_file("/dev/net/tun", of_rdwr(OPENFLAGS()), 0);
+ pri->fd = os_open_file("/dev/net/tun",
+ of_cloexec(of_rdwr(OPENFLAGS())), 0);
if(pri->fd < 0){
printk("Failed to open /dev/net/tun, err = %d\n",
-pri->fd);
diff --git a/arch/um/os-Linux/skas/mem.c b/arch/um/os-Linux/skas/mem.c
index 9890e90..fbb080c 100644
--- a/arch/um/os-Linux/skas/mem.c
+++ b/arch/um/os-Linux/skas/mem.c
@@ -60,7 +60,7 @@
multi_count++;
- get_safe_registers(regs);
+ get_safe_registers(regs, NULL);
regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE +
((unsigned long) &batch_syscall_stub -
(unsigned long) &__syscall_stub_start);
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 120a21c..bbf34cb 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -310,16 +310,12 @@
}
}
}
-#define INIT_JMP_NEW_THREAD 0
-#define INIT_JMP_REMOVE_SIGSTACK 1
-#define INIT_JMP_CALLBACK 2
-#define INIT_JMP_HALT 3
-#define INIT_JMP_REBOOT 4
int copy_context_skas0(unsigned long new_stack, int pid)
{
int err;
- unsigned long regs[MAX_REG_NR];
+ unsigned long regs[HOST_FRAME_SIZE];
+ unsigned long fp_regs[HOST_FP_SIZE];
unsigned long current_stack = current_stub_stack();
struct stub_data *data = (struct stub_data *) current_stack;
struct stub_data *child_data = (struct stub_data *) new_stack;
@@ -334,7 +330,7 @@
.timer = ((struct itimerval)
{ { 0, 1000000 / hz() },
{ 0, 1000000 / hz() }})});
- get_safe_registers(regs);
+ get_safe_registers(regs, fp_regs);
/* Set parent's instruction pointer to start of clone-stub */
regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE +
@@ -350,6 +346,11 @@
panic("copy_context_skas0 : PTRACE_SETREGS failed, "
"pid = %d, errno = %d\n", pid, errno);
+ err = ptrace_setfpregs(pid, fp_regs);
+ if(err < 0)
+ panic("copy_context_skas0 : PTRACE_SETFPREGS failed, "
+ "pid = %d, errno = %d\n", pid, errno);
+
/* set a well known return code for detection of child write failure */
child_data->err = 12345678;
@@ -457,6 +458,12 @@
set_signals(flags);
}
+#define INIT_JMP_NEW_THREAD 0
+#define INIT_JMP_REMOVE_SIGSTACK 1
+#define INIT_JMP_CALLBACK 2
+#define INIT_JMP_HALT 3
+#define INIT_JMP_REBOOT 4
+
void thread_wait(void *sw, void *fb)
{
sigjmp_buf buf, **switch_buf = sw, *fork_buf;
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 6c5b17e..829d6b0 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -49,6 +49,7 @@
int pid = os_getpid(), ppid = getppid();
int sc_result;
+ change_sig(SIGWINCH, 0);
if(ptrace(PTRACE_TRACEME, 0, 0, 0) < 0){
perror("ptrace");
os_kill_process(pid, 0);
diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c
index aee4812..7a6f6b9 100644
--- a/arch/um/os-Linux/sys-i386/registers.c
+++ b/arch/um/os-Linux/sys-i386/registers.c
@@ -122,9 +122,12 @@
err);
}
-void get_safe_registers(unsigned long *regs)
+void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
{
memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long));
+ if(fp_regs != NULL)
+ memcpy(fp_regs, exec_fp_regs,
+ HOST_FP_SIZE * sizeof(unsigned long));
}
void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer)
diff --git a/arch/um/os-Linux/sys-x86_64/registers.c b/arch/um/os-Linux/sys-x86_64/registers.c
index 4b638dfb..001941f 100644
--- a/arch/um/os-Linux/sys-x86_64/registers.c
+++ b/arch/um/os-Linux/sys-x86_64/registers.c
@@ -70,9 +70,12 @@
err);
}
-void get_safe_registers(unsigned long *regs)
+void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
{
memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long));
+ if(fp_regs != NULL)
+ memcpy(fp_regs, exec_fp_regs,
+ HOST_FP_SIZE * sizeof(unsigned long));
}
void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer)
diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c
index 0cdfd44..1fa09a7 100644
--- a/arch/um/sys-i386/ldt.c
+++ b/arch/um/sys-i386/ldt.c
@@ -16,7 +16,6 @@
#include "choose-mode.h"
#include "kern.h"
#include "mode_kern.h"
-#include "proc_mm.h"
#include "os.h"
extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
@@ -90,6 +89,7 @@
#include "skas.h"
#include "skas_ptrace.h"
#include "asm/mmu_context.h"
+#include "proc_mm.h"
long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc,
void **addr, int done)
diff --git a/arch/um/sys-x86_64/ptrace_user.c b/arch/um/sys-x86_64/ptrace_user.c
index 12e404c..b5f9c33 100644
--- a/arch/um/sys-x86_64/ptrace_user.c
+++ b/arch/um/sys-x86_64/ptrace_user.c
@@ -24,6 +24,13 @@
return(0);
}
+int ptrace_setfpregs(long pid, unsigned long *regs)
+{
+ if (ptrace(PTRACE_SETFPREGS, pid, 0, regs) < 0)
+ return -errno;
+ return 0;
+}
+
void ptrace_pokeuser(unsigned long addr, unsigned long data)
{
panic("ptrace_pokeuser");
diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c
index 5a585bf..7bd54a9 100644
--- a/arch/um/sys-x86_64/user-offsets.c
+++ b/arch/um/sys-x86_64/user-offsets.c
@@ -57,7 +57,7 @@
#endif
DEFINE_LONGS(HOST_FRAME_SIZE, FRAME_SIZE);
- DEFINE(HOST_FP_SIZE, 0);
+ DEFINE(HOST_FP_SIZE, sizeof(struct _fpstate) / sizeof(unsigned long));
DEFINE(HOST_XFP_SIZE, 0);
DEFINE_LONGS(HOST_RBX, RBX);
DEFINE_LONGS(HOST_RCX, RCX);
diff --git a/arch/v850/kernel/simcons.c b/arch/v850/kernel/simcons.c
index 7f0efaa..3975aa0 100644
--- a/arch/v850/kernel/simcons.c
+++ b/arch/v850/kernel/simcons.c
@@ -117,6 +117,7 @@
tty driver. */
void simcons_poll_tty (struct tty_struct *tty)
{
+ char buf[32]; /* Not the nicest way to do it but I need it correct first */
int flip = 0, send_break = 0;
struct pollfd pfd;
pfd.fd = 0;
@@ -124,21 +125,15 @@
if (V850_SIM_SYSCALL (poll, &pfd, 1, 0) > 0) {
if (pfd.revents & POLLIN) {
- int left = TTY_FLIPBUF_SIZE - tty->flip.count;
-
- if (left > 0) {
- unsigned char *buf = tty->flip.char_buf_ptr;
- int rd = V850_SIM_SYSCALL (read, 0, buf, left);
-
- if (rd > 0) {
- tty->flip.count += rd;
- tty->flip.char_buf_ptr += rd;
- memset (tty->flip.flag_buf_ptr, 0, rd);
- tty->flip.flag_buf_ptr += rd;
- flip = 1;
- } else
- send_break = 1;
- }
+ /* Real block hardware knows the transfer size before
+ transfer so the new tty buffering doesn't try to handle
+ this rather weird simulator specific case well */
+ int rd = V850_SIM_SYSCALL (read, 0, buf, 32);
+ if (rd > 0) {
+ tty_insert_flip_string(tty, buf, rd);
+ flip = 1;
+ } else
+ send_break = 1;
} else if (pfd.revents & POLLERR)
send_break = 1;
}
diff --git a/arch/x86_64/Kconfig.debug b/arch/x86_64/Kconfig.debug
index fcb06a5..ea31b4c 100644
--- a/arch/x86_64/Kconfig.debug
+++ b/arch/x86_64/Kconfig.debug
@@ -2,13 +2,6 @@
source "lib/Kconfig.debug"
-config INIT_DEBUG
- bool "Debug __init statements"
- depends on DEBUG_KERNEL
- help
- Fill __init and __initdata at the end of boot. This helps debugging
- illegal uses of __init and __initdata after initialization.
-
config DEBUG_RODATA
bool "Write protect kernel read-only data structures"
depends on DEBUG_KERNEL
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 09a3eb7..5683292 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-git12
-# Mon Jan 16 13:09:08 2006
+# Linux kernel version: 2.6.16-rc1-git2
+# Thu Jan 19 10:05:21 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
@@ -310,6 +310,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -319,11 +324,6 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -1098,6 +1098,12 @@
#
#
+# EDAC - error detection and reporting (RAS)
+#
+# CONFIG_EDAC is not set
+# CONFIG_EDAC_POLL is not set
+
+#
# Firmware Drivers
#
# CONFIG_EDD is not set
@@ -1290,6 +1296,7 @@
# CONFIG_DEBUG_VM is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
+# CONFIG_UNWIND_INFO is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_INIT_DEBUG=y
# CONFIG_DEBUG_RODATA is not set
diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S
index f05c2a8..ada4535 100644
--- a/arch/x86_64/ia32/ia32entry.S
+++ b/arch/x86_64/ia32/ia32entry.S
@@ -676,7 +676,7 @@
.quad sys_mkdirat
.quad sys_mknodat
.quad sys_fchownat
- .quad sys_futimesat
+ .quad compat_sys_futimesat
.quad compat_sys_newfstatat /* 300 */
.quad sys_unlinkat
.quad sys_renameat
@@ -685,6 +685,9 @@
.quad sys_readlinkat /* 305 */
.quad sys_fchmodat
.quad sys_faccessat
+ .quad sys_ni_syscall /* pselect6 for now */
+ .quad sys_ni_syscall /* ppoll for now */
+ .quad sys_unshare /* 310 */
ia32_syscall_end:
.rept IA32_NR_syscalls-(ia32_syscall_end-ia32_sys_call_table)/8
.quad ni_syscall
diff --git a/arch/x86_64/kernel/acpi/Makefile b/arch/x86_64/kernel/acpi/Makefile
index 7da9ace..4fe9707 100644
--- a/arch/x86_64/kernel/acpi/Makefile
+++ b/arch/x86_64/kernel/acpi/Makefile
@@ -1,3 +1,8 @@
obj-y := boot.o
boot-y := ../../../i386/kernel/acpi/boot.o
obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
+
+ifneq ($(CONFIG_ACPI_PROCESSOR),)
+obj-y += processor.o
+endif
+
diff --git a/arch/x86_64/kernel/acpi/processor.c b/arch/x86_64/kernel/acpi/processor.c
new file mode 100644
index 0000000..3bdc2ba
--- /dev/null
+++ b/arch/x86_64/kernel/acpi/processor.c
@@ -0,0 +1,72 @@
+/*
+ * arch/x86_64/kernel/acpi/processor.c
+ *
+ * Copyright (C) 2005 Intel Corporation
+ * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ * - Added _PDC for platforms with Intel CPUs
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+
+#include <acpi/processor.h>
+#include <asm/acpi.h>
+
+static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c)
+{
+ struct acpi_object_list *obj_list;
+ union acpi_object *obj;
+ u32 *buf;
+
+ /* allocate and initialize pdc. It will be used later. */
+ obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
+ if (!obj_list) {
+ printk(KERN_ERR "Memory allocation error\n");
+ return;
+ }
+
+ obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+ if (!obj) {
+ printk(KERN_ERR "Memory allocation error\n");
+ kfree(obj_list);
+ return;
+ }
+
+ buf = kmalloc(12, GFP_KERNEL);
+ if (!buf) {
+ printk(KERN_ERR "Memory allocation error\n");
+ kfree(obj);
+ kfree(obj_list);
+ return;
+ }
+
+ buf[0] = ACPI_PDC_REVISION_ID;
+ buf[1] = 1;
+ buf[2] = ACPI_PDC_EST_CAPABILITY_SMP;
+
+ obj->type = ACPI_TYPE_BUFFER;
+ obj->buffer.length = 12;
+ obj->buffer.pointer = (u8 *) buf;
+ obj_list->count = 1;
+ obj_list->pointer = obj;
+ pr->pdc = obj_list;
+
+ return;
+}
+
+/* Initialize _PDC data based on the CPU vendor */
+void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
+{
+ unsigned int cpu = pr->id;
+ struct cpuinfo_x86 *c = cpu_data + cpu;
+
+ pr->pdc = NULL;
+ if (c->x86_vendor == X86_VENDOR_INTEL && cpu_has(c, X86_FEATURE_EST))
+ init_intel_pdc(pr, c);
+
+ return;
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_init_pdc);
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index 5d3c5b0..6147770 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -35,8 +35,12 @@
#include <asm/mach_apic.h>
#include <asm/nmi.h>
#include <asm/idle.h>
+#include <asm/proto.h>
+#include <asm/timex.h>
int apic_verbosity;
+int apic_runs_main_timer;
+int apic_calibrate_pmtmr __initdata;
int disable_apic_timer __initdata;
@@ -68,6 +72,26 @@
return maxlvt;
}
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(unsigned int irq)
+{
+ printk("unexpected IRQ trap at vector %02x\n", irq);
+ /*
+ * Currently unexpected vectors happen only on SMP and APIC.
+ * We _must_ ack these because every local APIC has only N
+ * irq slots per priority level, and a 'hanging, unacked' IRQ
+ * holds up an irq slot - in excessive cases (when multiple
+ * unexpected vectors occur) that might lock up the APIC
+ * completely.
+ * But don't ack when the APIC is disabled. -AK
+ */
+ if (!disable_apic)
+ ack_APIC_irq();
+}
+
void clear_local_APIC(void)
{
int maxlvt;
@@ -702,9 +726,17 @@
c2 |= inb_p(0x40) << 8;
} while (c2 - c1 < 300);
}
-
__setup_APIC_LVTT(clocks);
-
+ /* Turn off PIT interrupt if we use APIC timer as main timer.
+ Only works with the PM timer right now
+ TBD fix it for HPET too. */
+ if (vxtime.mode == VXTIME_PMTMR &&
+ smp_processor_id() == boot_cpu_id &&
+ apic_runs_main_timer == 1 &&
+ !cpu_isset(boot_cpu_id, timer_interrupt_broadcast_ipi_mask)) {
+ stop_timer_interrupt();
+ apic_runs_main_timer++;
+ }
local_irq_restore(flags);
}
@@ -735,14 +767,27 @@
__setup_APIC_LVTT(1000000000);
apic_start = apic_read(APIC_TMCCT);
- rdtscl(tsc_start);
-
- do {
+#ifdef CONFIG_X86_PM_TIMER
+ if (apic_calibrate_pmtmr && pmtmr_ioport) {
+ pmtimer_wait(5000); /* 5ms wait */
apic = apic_read(APIC_TMCCT);
- rdtscl(tsc);
- } while ((tsc - tsc_start) < TICK_COUNT && (apic - apic_start) < TICK_COUNT);
+ result = (apic_start - apic) * 1000L / 5;
+ } else
+#endif
+ {
+ rdtscl(tsc_start);
- result = (apic_start - apic) * 1000L * cpu_khz / (tsc - tsc_start);
+ do {
+ apic = apic_read(APIC_TMCCT);
+ rdtscl(tsc);
+ } while ((tsc - tsc_start) < TICK_COUNT &&
+ (apic - apic_start) < TICK_COUNT);
+
+ result = (apic_start - apic) * 1000L * cpu_khz /
+ (tsc - tsc_start);
+ }
+ printk("result %d\n", result);
+
printk(KERN_INFO "Detected %d.%03d MHz APIC timer.\n",
result / 1000 / 1000, result / 1000 % 1000);
@@ -872,6 +917,8 @@
#ifdef CONFIG_SMP
update_process_times(user_mode(regs));
#endif
+ if (apic_runs_main_timer > 1 && smp_processor_id() == boot_cpu_id)
+ main_timer_handler(regs);
/*
* We take the 'long' return path, and there every subsystem
* grabs the appropriate locks (kernel lock/ irq lock).
@@ -924,7 +971,7 @@
* multi-chassis. Use available data to take a good guess.
* If in doubt, go HPET.
*/
-__init int oem_force_hpet_timer(void)
+__cpuinit int oem_force_hpet_timer(void)
{
int i, clusters, zeros;
unsigned id;
@@ -1081,10 +1128,34 @@
static __init int setup_noapictimer(char *str)
{
+ if (str[0] != ' ' && str[0] != 0)
+ return -1;
disable_apic_timer = 1;
return 0;
}
+static __init int setup_apicmaintimer(char *str)
+{
+ apic_runs_main_timer = 1;
+ nohpet = 1;
+ return 0;
+}
+__setup("apicmaintimer", setup_apicmaintimer);
+
+static __init int setup_noapicmaintimer(char *str)
+{
+ apic_runs_main_timer = -1;
+ return 0;
+}
+__setup("noapicmaintimer", setup_noapicmaintimer);
+
+static __init int setup_apicpmtimer(char *s)
+{
+ apic_calibrate_pmtmr = 1;
+ return setup_apicmaintimer(NULL);
+}
+__setup("apicpmtimer", setup_apicpmtimer);
+
/* dummy parsing: see setup.c */
__setup("disableapic", setup_disableapic);
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index dbdba56..b150c87 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -499,7 +499,9 @@
movq %gs:pda_irqstackptr,%rax
cmoveq %rax,%rsp /*todo This needs CFI annotation! */
pushq %rdi # save old stack
+#ifndef CONFIG_DEBUG_INFO
CFI_ADJUST_CFA_OFFSET 8
+#endif
call \func
.endm
@@ -509,7 +511,9 @@
/* 0(%rsp): oldrsp-ARGOFFSET */
ret_from_intr:
popq %rdi
+#ifndef CONFIG_DEBUG_INFO
CFI_ADJUST_CFA_OFFSET -8
+#endif
cli
decl %gs:pda_irqcount
#ifdef CONFIG_DEBUG_INFO
@@ -922,7 +926,7 @@
.previous .text
/* runs on exception stack */
-ENTRY(nmi)
+KPROBE_ENTRY(nmi)
INTR_FRAME
pushq $-1
CFI_ADJUST_CFA_OFFSET 8
@@ -969,6 +973,7 @@
cli
jmp paranoid_userspace
CFI_ENDPROC
+ .previous .text
KPROBE_ENTRY(int3)
INTR_FRAME
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index e8cf44e..4282d72 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -304,6 +304,14 @@
#endif
/* RED-PEN skip them on mptables too? */
return;
+ case PCI_VENDOR_ID_ATI:
+ if (apic_runs_main_timer != 0)
+ break;
+ printk(KERN_INFO
+ "ATI board detected. Using APIC/PM timer.\n");
+ apic_runs_main_timer = 1;
+ nohpet = 1;
+ return;
}
/* No multi-function device? */
@@ -2027,7 +2035,7 @@
}
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
+int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
{
struct IO_APIC_route_entry entry;
unsigned long flags;
@@ -2049,8 +2057,8 @@
entry.delivery_mode = INT_DELIVERY_MODE;
entry.dest_mode = INT_DEST_MODE;
entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
- entry.trigger = edge_level;
- entry.polarity = active_high_low;
+ entry.trigger = triggering;
+ entry.polarity = polarity;
entry.mask = 1; /* Disabled (masked) */
irq = gsi_irq_sharing(irq);
@@ -2065,9 +2073,9 @@
apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
"IRQ %d Mode:%i Active:%i)\n", ioapic,
mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
- edge_level, active_high_low);
+ triggering, polarity);
- ioapic_register_intr(irq, entry.vector, edge_level);
+ ioapic_register_intr(irq, entry.vector, triggering);
if (!ioapic && (irq < 16))
disable_8259A_irq(irq);
diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c
index 13a2ead..b8b9529 100644
--- a/arch/x86_64/kernel/mce.c
+++ b/arch/x86_64/kernel/mce.c
@@ -380,7 +380,7 @@
*/
void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
{
- static cpumask_t mce_cpus __initdata = CPU_MASK_NONE;
+ static cpumask_t mce_cpus = CPU_MASK_NONE;
mce_cpu_quirks(c);
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index 1105250..dc49bfb 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -915,7 +915,7 @@
#define MAX_GSI_NUM 4096
-int mp_register_gsi(u32 gsi, int edge_level, int active_high_low)
+int mp_register_gsi(u32 gsi, int triggering, int polarity)
{
int ioapic = -1;
int ioapic_pin = 0;
@@ -964,7 +964,7 @@
mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
- if (edge_level) {
+ if (triggering == ACPI_LEVEL_SENSITIVE) {
/*
* For PCI devices assign IRQs in order, avoiding gaps
* due to unused I/O APIC pins.
@@ -986,8 +986,8 @@
}
io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
- edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1,
- active_high_low == ACPI_ACTIVE_HIGH ? 0 : 1);
+ triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
return gsi;
}
diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c
index 5fae6f0..8be407a 100644
--- a/arch/x86_64/kernel/nmi.c
+++ b/arch/x86_64/kernel/nmi.c
@@ -24,6 +24,7 @@
#include <linux/sysdev.h>
#include <linux/nmi.h>
#include <linux/sysctl.h>
+#include <linux/kprobes.h>
#include <asm/smp.h>
#include <asm/mtrr.h>
@@ -468,7 +469,7 @@
touch_softlockup_watchdog();
}
-void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason)
+void __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
{
int sum;
int touched = 0;
@@ -512,14 +513,14 @@
}
}
-static int dummy_nmi_callback(struct pt_regs * regs, int cpu)
+static __kprobes int dummy_nmi_callback(struct pt_regs * regs, int cpu)
{
return 0;
}
static nmi_callback_t nmi_callback = dummy_nmi_callback;
-asmlinkage void do_nmi(struct pt_regs * regs, long error_code)
+asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code)
{
int cpu = safe_smp_processor_id();
diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c
index 2f5d832..4ed391e 100644
--- a/arch/x86_64/kernel/pci-dma.c
+++ b/arch/x86_64/kernel/pci-dma.c
@@ -107,6 +107,9 @@
goto again;
}
+ /* Let low level make its own zone decisions */
+ gfp &= ~(GFP_DMA32|GFP_DMA);
+
if (dma_ops->alloc_coherent)
return dma_ops->alloc_coherent(dev, size,
dma_handle, gfp);
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index c37fc77..2fe23a6 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -457,9 +457,12 @@
error:
flush_gart(NULL);
gart_unmap_sg(dev, sg, nents, dir);
- /* When it was forced try again unforced */
- if (force_iommu)
- return dma_map_sg_nonforce(dev, sg, nents, dir);
+ /* When it was forced or merged try again in a dumb way */
+ if (force_iommu || iommu_merge) {
+ out = dma_map_sg_nonforce(dev, sg, nents, dir);
+ if (out > 0)
+ return out;
+ }
if (panic_on_overflow)
panic("dma_map_sg: overflow on %lu pages\n", pages);
iommu_full(dev, pages << PAGE_SHIFT, dir);
@@ -642,9 +645,18 @@
(no_agp && init_k8_gatt(&info) < 0)) {
no_iommu = 1;
no_iommu_init();
+ printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n");
+ if (end_pfn > MAX_DMA32_PFN) {
+ printk(KERN_ERR "WARNING more than 4GB of memory "
+ "but IOMMU not compiled in.\n"
+ KERN_ERR "WARNING 32bit PCI may malfunction.\n"
+ KERN_ERR "You might want to enable "
+ "CONFIG_GART_IOMMU\n");
+ }
return -1;
}
+ printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n");
aper_size = info.aper_size * 1024 * 1024;
iommu_size = check_iommu_size(info.aper_base, aper_size);
iommu_pages = iommu_size >> PAGE_SHIFT;
@@ -718,7 +730,6 @@
flush_gart(NULL);
- printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n");
dma_ops = &gart_dma_ops;
return 0;
diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c
index e415649..44adcc2 100644
--- a/arch/x86_64/kernel/pci-nommu.c
+++ b/arch/x86_64/kernel/pci-nommu.c
@@ -88,12 +88,5 @@
{
if (dma_ops)
return;
- printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n");
dma_ops = &nommu_dma_ops;
- if (end_pfn > MAX_DMA32_PFN) {
- printk(KERN_ERR
- "WARNING more than 4GB of memory but IOMMU not compiled in.\n"
- KERN_ERR "WARNING 32bit PCI may malfunction.\n"
- KERN_ERR "You might want to enable CONFIG_GART_IOMMU\n");
- }
}
diff --git a/arch/x86_64/kernel/pci-swiotlb.c b/arch/x86_64/kernel/pci-swiotlb.c
index 3569a25..990ed67 100644
--- a/arch/x86_64/kernel/pci-swiotlb.c
+++ b/arch/x86_64/kernel/pci-swiotlb.c
@@ -35,8 +35,8 @@
(end_pfn > MAX_DMA32_PFN || force_iommu))
swiotlb = 1;
if (swiotlb) {
- swiotlb_init();
printk(KERN_INFO "PCI-DMA: Using software bounce buffering for IO (SWIOTLB)\n");
+ swiotlb_init();
dma_ops = &swiotlb_dma_ops;
}
}
diff --git a/arch/x86_64/kernel/pmtimer.c b/arch/x86_64/kernel/pmtimer.c
index feb5f10..5c51d10 100644
--- a/arch/x86_64/kernel/pmtimer.c
+++ b/arch/x86_64/kernel/pmtimer.c
@@ -80,6 +80,31 @@
return lost - 1;
}
+static unsigned pmtimer_wait_tick(void)
+{
+ u32 a, b;
+ for (a = b = inl(pmtmr_ioport) & ACPI_PM_MASK;
+ a == b;
+ b = inl(pmtmr_ioport) & ACPI_PM_MASK)
+ ;
+ return b;
+}
+
+/* note: wait time is rounded up to one tick */
+void pmtimer_wait(unsigned us)
+{
+ u32 a, b;
+ a = pmtimer_wait_tick();
+ do {
+ b = inl(pmtmr_ioport);
+ } while (cyc2us(b - a) < us);
+}
+
+void pmtimer_resume(void)
+{
+ last_pmtmr_tick = inl(pmtmr_ioport);
+}
+
unsigned int do_gettimeoffset_pm(void)
{
u32 now, offset, delta = 0;
diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c
index 8ded407..22a05de 100644
--- a/arch/x86_64/kernel/process.c
+++ b/arch/x86_64/kernel/process.c
@@ -516,8 +516,10 @@
* This could still be optimized:
* - fold all the options into a flag word and test it with a single test.
* - could test fs/gs bitsliced
+ *
+ * Kprobes not supported here. Set the probe on schedule instead.
*/
-struct task_struct *
+__kprobes struct task_struct *
__switch_to(struct task_struct *prev_p, struct task_struct *next_p)
{
struct thread_struct *prev = &prev_p->thread,
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 28895c0..9435ab7 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -94,7 +94,6 @@
/*
* Setup options
*/
-struct drive_info_struct { char dummy[32]; } drive_info;
struct screen_info screen_info;
struct sys_desc_table_struct {
unsigned short length;
@@ -572,7 +571,6 @@
unsigned long kernel_end;
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
- drive_info = DRIVE_INFO;
screen_info = SCREEN_INFO;
edid_info = EDID_INFO;
saved_video_mode = SAVED_VIDEO_MODE;
@@ -741,7 +739,7 @@
e820_setup_gap();
#ifdef CONFIG_GART_IOMMU
- iommu_hole_init();
+ iommu_hole_init();
#endif
#ifdef CONFIG_VT
@@ -877,6 +875,7 @@
static int __init init_amd(struct cpuinfo_x86 *c)
{
int r;
+ unsigned level;
#ifdef CONFIG_SMP
unsigned long value;
@@ -899,6 +898,11 @@
3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
clear_bit(0*32+31, &c->x86_capability);
+ /* On C+ stepping K8 rep microcode works well for copy/memset */
+ level = cpuid_eax(1);
+ if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58))
+ set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability);
+
r = get_model_name(c);
if (!r) {
switch (c->x86) {
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index a28756e..67e4e28 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -59,6 +59,7 @@
#include <asm/nmi.h>
#include <asm/irq.h>
#include <asm/hw_irq.h>
+#include <asm/numa.h>
/* Number of siblings per CPU package */
int smp_num_siblings = 1;
@@ -890,6 +891,7 @@
if (boot_error) {
cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
clear_bit(cpu, &cpu_initialized); /* was set by cpu_init() */
+ clear_node_cpumask(cpu); /* was set by numa_add_cpu */
cpu_clear(cpu, cpu_present_map);
cpu_clear(cpu, cpu_possible_map);
x86_cpu_to_apicid[cpu] = BAD_APICID;
@@ -1187,6 +1189,7 @@
cpu_clear(cpu, cpu_callout_map);
cpu_clear(cpu, cpu_callin_map);
clear_bit(cpu, &cpu_initialized); /* was set by cpu_init() */
+ clear_node_cpumask(cpu);
}
int __cpu_disable(void)
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index f8c47c6..dba7237 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -51,7 +51,7 @@
DEFINE_SPINLOCK(rtc_lock);
DEFINE_SPINLOCK(i8253_lock);
-static int nohpet __initdata = 0;
+int nohpet __initdata = 0;
static int notsc __initdata = 0;
#undef HPET_HACK_ENABLE_DANGEROUS
@@ -345,7 +345,7 @@
#endif
}
-static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+void main_timer_handler(struct pt_regs *regs)
{
static unsigned long rtc_update = 0;
unsigned long tsc;
@@ -458,12 +458,17 @@
}
write_sequnlock(&xtime_lock);
+}
+static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ if (apic_runs_main_timer > 1)
+ return IRQ_HANDLED;
+ main_timer_handler(regs);
#ifdef CONFIG_X86_LOCAL_APIC
if (using_apic_timer)
smp_send_timer_broadcast_ipi();
#endif
-
return IRQ_HANDLED;
}
@@ -743,7 +748,7 @@
* Timer0 and Timer1 is used by platform.
*/
hd.hd_phys_address = vxtime.hpet_address;
- hd.hd_address = (void *)fix_to_virt(FIX_HPET_BASE);
+ hd.hd_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE);
hd.hd_nirqs = ntimer;
hd.hd_flags = HPET_DATA_PLATFORM;
hpet_reserve_timer(&hd, 0);
@@ -843,17 +848,43 @@
return hpet_timer_stop_set_go(hpet_tick);
}
-void __init pit_init(void)
+#define PIT_MODE 0x43
+#define PIT_CH0 0x40
+
+static void __init __pit_init(int val, u8 mode)
{
unsigned long flags;
spin_lock_irqsave(&i8253_lock, flags);
- outb_p(0x34, 0x43); /* binary, mode 2, LSB/MSB, ch 0 */
- outb_p(LATCH & 0xff, 0x40); /* LSB */
- outb_p(LATCH >> 8, 0x40); /* MSB */
+ outb_p(mode, PIT_MODE);
+ outb_p(val & 0xff, PIT_CH0); /* LSB */
+ outb_p(val >> 8, PIT_CH0); /* MSB */
spin_unlock_irqrestore(&i8253_lock, flags);
}
+void __init pit_init(void)
+{
+ __pit_init(LATCH, 0x34); /* binary, mode 2, LSB/MSB, ch 0 */
+}
+
+void __init pit_stop_interrupt(void)
+{
+ __pit_init(0, 0x30); /* mode 0 */
+}
+
+void __init stop_timer_interrupt(void)
+{
+ char *name;
+ if (vxtime.hpet_address) {
+ name = "HPET";
+ hpet_timer_stop_set_go(0);
+ } else {
+ name = "PIT";
+ pit_stop_interrupt();
+ }
+ printk(KERN_INFO "timer: %s interrupt stopped.\n", name);
+}
+
int __init time_setup(char *str)
{
report_lost_ticks = 1;
@@ -932,7 +963,7 @@
* Make an educated guess if the TSC is trustworthy and synchronized
* over all CPUs.
*/
-__init int unsynchronized_tsc(void)
+__cpuinit int unsynchronized_tsc(void)
{
#ifdef CONFIG_SMP
if (oem_force_hpet_timer())
@@ -1016,9 +1047,21 @@
write_seqlock_irqsave(&xtime_lock,flags);
xtime.tv_sec = sec;
xtime.tv_nsec = 0;
+ if (vxtime.mode == VXTIME_HPET) {
+ if (hpet_use_timer)
+ vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
+ else
+ vxtime.last = hpet_readl(HPET_COUNTER);
+#ifdef CONFIG_X86_PM_TIMER
+ } else if (vxtime.mode == VXTIME_PMTMR) {
+ pmtimer_resume();
+#endif
+ } else
+ vxtime.last_tsc = get_cycles_sync();
write_sequnlock_irqrestore(&xtime_lock,flags);
jiffies += sleep_length;
wall_jiffies += sleep_length;
+ monotonic_base += sleep_length * (NSEC_PER_SEC/HZ);
touch_softlockup_watchdog();
return 0;
}
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index 8bb0aed..ee1b2da 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -372,7 +372,7 @@
static DEFINE_SPINLOCK(die_lock);
static int die_owner = -1;
-unsigned long oops_begin(void)
+unsigned __kprobes long oops_begin(void)
{
int cpu = safe_smp_processor_id();
unsigned long flags;
@@ -391,7 +391,7 @@
return flags;
}
-void oops_end(unsigned long flags)
+void __kprobes oops_end(unsigned long flags)
{
die_owner = -1;
bust_spinlocks(0);
@@ -400,7 +400,7 @@
panic("Oops");
}
-void __die(const char * str, struct pt_regs * regs, long err)
+void __kprobes __die(const char * str, struct pt_regs * regs, long err)
{
static int die_counter;
printk(KERN_EMERG "%s: %04lx [%u] ", str, err & 0xffff,++die_counter);
@@ -432,7 +432,7 @@
do_exit(SIGSEGV);
}
-void die_nmi(char *str, struct pt_regs *regs)
+void __kprobes die_nmi(char *str, struct pt_regs *regs)
{
unsigned long flags = oops_begin();
@@ -575,7 +575,8 @@
}
}
-static void mem_parity_error(unsigned char reason, struct pt_regs * regs)
+static __kprobes void
+mem_parity_error(unsigned char reason, struct pt_regs * regs)
{
printk("Uhhuh. NMI received. Dazed and confused, but trying to continue\n");
printk("You probably have a hardware problem with your RAM chips\n");
@@ -585,7 +586,8 @@
outb(reason, 0x61);
}
-static void io_check_error(unsigned char reason, struct pt_regs * regs)
+static __kprobes void
+io_check_error(unsigned char reason, struct pt_regs * regs)
{
printk("NMI: IOCK error (debug interrupt?)\n");
show_registers(regs);
@@ -598,7 +600,8 @@
outb(reason, 0x61);
}
-static void unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
+static __kprobes void
+unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
{ printk("Uhhuh. NMI received for unknown reason %02x.\n", reason);
printk("Dazed and confused, but trying to continue\n");
printk("Do you have a strange power saving mode enabled?\n");
@@ -606,7 +609,7 @@
/* Runs on IST stack. This code must keep interrupts off all the time.
Nested NMIs are prevented by the CPU. */
-asmlinkage void default_do_nmi(struct pt_regs *regs)
+asmlinkage __kprobes void default_do_nmi(struct pt_regs *regs)
{
unsigned char reason = 0;
int cpu;
@@ -658,7 +661,7 @@
/* Help handler running on IST stack to switch back to user stack
for scheduling or signal handling. The actual stack switch is done in
entry.S */
-asmlinkage struct pt_regs *sync_regs(struct pt_regs *eregs)
+asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
{
struct pt_regs *regs = eregs;
/* Did already sync */
diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S
index b0eed1f..74db006 100644
--- a/arch/x86_64/kernel/vmlinux.lds.S
+++ b/arch/x86_64/kernel/vmlinux.lds.S
@@ -172,13 +172,15 @@
. = ALIGN(4096);
__initramfs_start = .;
.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) }
- __initramfs_end = .;
- . = ALIGN(32);
+ __initramfs_end = .;
+ /* temporary here to work around NR_CPUS. If you see this comment in 2.6.17+
+ complain */
+ . = ALIGN(4096);
+ __init_end = .;
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
__per_cpu_start = .;
.data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { *(.data.percpu) }
__per_cpu_end = .;
- . = ALIGN(4096);
- __init_end = .;
. = ALIGN(4096);
__nosave_begin = .;
diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c
index b614d54..3496abc 100644
--- a/arch/x86_64/kernel/x8664_ksyms.c
+++ b/arch/x86_64/kernel/x8664_ksyms.c
@@ -39,11 +39,6 @@
extern void __read_lock_failed(rwlock_t *rw);
#endif
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE)
-extern struct drive_info_struct drive_info;
-EXPORT_SYMBOL(drive_info);
-#endif
-
/* platform dependent support */
EXPORT_SYMBOL(boot_cpu_data);
//EXPORT_SYMBOL(dump_fpu);
diff --git a/arch/x86_64/lib/Makefile b/arch/x86_64/lib/Makefile
index bba5db6..ccef6ae 100644
--- a/arch/x86_64/lib/Makefile
+++ b/arch/x86_64/lib/Makefile
@@ -4,7 +4,7 @@
CFLAGS_csum-partial.o := -funroll-loops
-obj-y := io.o
+obj-y := io.o iomap_copy.o
lib-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \
usercopy.o getuser.o putuser.o \
diff --git a/arch/x86_64/lib/clear_page.S b/arch/x86_64/lib/clear_page.S
index 43d9fa1..1f81b79 100644
--- a/arch/x86_64/lib/clear_page.S
+++ b/arch/x86_64/lib/clear_page.S
@@ -5,8 +5,46 @@
.globl clear_page
.p2align 4
clear_page:
+ xorl %eax,%eax
+ movl $4096/64,%ecx
+ .p2align 4
+.Lloop:
+ decl %ecx
+#define PUT(x) movq %rax,x*8(%rdi)
+ movq %rax,(%rdi)
+ PUT(1)
+ PUT(2)
+ PUT(3)
+ PUT(4)
+ PUT(5)
+ PUT(6)
+ PUT(7)
+ leaq 64(%rdi),%rdi
+ jnz .Lloop
+ nop
+ ret
+clear_page_end:
+
+ /* Some CPUs run faster using the string instructions.
+ It is also a lot simpler. Use this when possible */
+
+#include <asm/cpufeature.h>
+
+ .section .altinstructions,"a"
+ .align 8
+ .quad clear_page
+ .quad clear_page_c
+ .byte X86_FEATURE_REP_GOOD
+ .byte clear_page_end-clear_page
+ .byte clear_page_c_end-clear_page_c
+ .previous
+
+ .section .altinstr_replacement,"ax"
+clear_page_c:
movl $4096/8,%ecx
xorl %eax,%eax
rep
stosq
ret
+clear_page_c_end:
+ .previous
diff --git a/arch/x86_64/lib/copy_page.S b/arch/x86_64/lib/copy_page.S
index 621a197..8fa19d9 100644
--- a/arch/x86_64/lib/copy_page.S
+++ b/arch/x86_64/lib/copy_page.S
@@ -8,7 +8,94 @@
.globl copy_page
.p2align 4
copy_page:
+ subq $3*8,%rsp
+ movq %rbx,(%rsp)
+ movq %r12,1*8(%rsp)
+ movq %r13,2*8(%rsp)
+
+ movl $(4096/64)-5,%ecx
+ .p2align 4
+.Loop64:
+ dec %rcx
+
+ movq (%rsi), %rax
+ movq 8 (%rsi), %rbx
+ movq 16 (%rsi), %rdx
+ movq 24 (%rsi), %r8
+ movq 32 (%rsi), %r9
+ movq 40 (%rsi), %r10
+ movq 48 (%rsi), %r11
+ movq 56 (%rsi), %r12
+
+ prefetcht0 5*64(%rsi)
+
+ movq %rax, (%rdi)
+ movq %rbx, 8 (%rdi)
+ movq %rdx, 16 (%rdi)
+ movq %r8, 24 (%rdi)
+ movq %r9, 32 (%rdi)
+ movq %r10, 40 (%rdi)
+ movq %r11, 48 (%rdi)
+ movq %r12, 56 (%rdi)
+
+ leaq 64 (%rsi), %rsi
+ leaq 64 (%rdi), %rdi
+
+ jnz .Loop64
+
+ movl $5,%ecx
+ .p2align 4
+.Loop2:
+ decl %ecx
+
+ movq (%rsi), %rax
+ movq 8 (%rsi), %rbx
+ movq 16 (%rsi), %rdx
+ movq 24 (%rsi), %r8
+ movq 32 (%rsi), %r9
+ movq 40 (%rsi), %r10
+ movq 48 (%rsi), %r11
+ movq 56 (%rsi), %r12
+
+ movq %rax, (%rdi)
+ movq %rbx, 8 (%rdi)
+ movq %rdx, 16 (%rdi)
+ movq %r8, 24 (%rdi)
+ movq %r9, 32 (%rdi)
+ movq %r10, 40 (%rdi)
+ movq %r11, 48 (%rdi)
+ movq %r12, 56 (%rdi)
+
+ leaq 64(%rdi),%rdi
+ leaq 64(%rsi),%rsi
+
+ jnz .Loop2
+
+ movq (%rsp),%rbx
+ movq 1*8(%rsp),%r12
+ movq 2*8(%rsp),%r13
+ addq $3*8,%rsp
+ ret
+
+ /* Some CPUs run faster using the string copy instructions.
+ It is also a lot simpler. Use this when possible */
+
+#include <asm/cpufeature.h>
+
+ .section .altinstructions,"a"
+ .align 8
+ .quad copy_page
+ .quad copy_page_c
+ .byte X86_FEATURE_REP_GOOD
+ .byte copy_page_c_end-copy_page_c
+ .byte copy_page_c_end-copy_page_c
+ .previous
+
+ .section .altinstr_replacement,"ax"
+copy_page_c:
movl $4096/8,%ecx
rep
movsq
ret
+copy_page_c_end:
+ .previous
diff --git a/arch/x86_64/lib/copy_user.S b/arch/x86_64/lib/copy_user.S
index 79422b6..f64569b 100644
--- a/arch/x86_64/lib/copy_user.S
+++ b/arch/x86_64/lib/copy_user.S
@@ -4,9 +4,12 @@
* Functions to copy from and to user space.
*/
+#define FIX_ALIGNMENT 1
+
#include <asm/current.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
+ #include <asm/cpufeature.h>
/* Standard copy_to_user with segment limit checking */
.globl copy_to_user
@@ -18,7 +21,23 @@
jc bad_to_user
cmpq threadinfo_addr_limit(%rax),%rcx
jae bad_to_user
- jmp copy_user_generic
+2:
+ .byte 0xe9 /* 32bit jump */
+ .long .Lcug-1f
+1:
+
+ .section .altinstr_replacement,"ax"
+3: .byte 0xe9 /* replacement jmp with 8 bit immediate */
+ .long copy_user_generic_c-1b /* offset */
+ .previous
+ .section .altinstructions,"a"
+ .align 8
+ .quad 2b
+ .quad 3b
+ .byte X86_FEATURE_REP_GOOD
+ .byte 5
+ .byte 5
+ .previous
/* Standard copy_from_user with segment limit checking */
.globl copy_from_user
@@ -53,44 +72,230 @@
* rsi source
* rdx count
*
- * Only 4GB of copy is supported. This shouldn't be a problem
- * because the kernel normally only writes from/to page sized chunks
- * even if user space passed a longer buffer.
- * And more would be dangerous because both Intel and AMD have
- * errata with rep movsq > 4GB. If someone feels the need to fix
- * this please consider this.
- *
* Output:
* eax uncopied bytes or 0 if successful.
*/
-
.globl copy_user_generic
+ .p2align 4
copy_user_generic:
+ .byte 0x66,0x66,0x90 /* 5 byte nop for replacement jump */
+ .byte 0x66,0x90
+1:
+ .section .altinstr_replacement,"ax"
+2: .byte 0xe9 /* near jump with 32bit immediate */
+ .long copy_user_generic_c-1b /* offset */
+ .previous
+ .section .altinstructions,"a"
+ .align 8
+ .quad copy_user_generic
+ .quad 2b
+ .byte X86_FEATURE_REP_GOOD
+ .byte 5
+ .byte 5
+ .previous
+.Lcug:
+ pushq %rbx
+ xorl %eax,%eax /*zero for the exception handler */
+
+#ifdef FIX_ALIGNMENT
+ /* check for bad alignment of destination */
+ movl %edi,%ecx
+ andl $7,%ecx
+ jnz .Lbad_alignment
+.Lafter_bad_alignment:
+#endif
+
+ movq %rdx,%rcx
+
+ movl $64,%ebx
+ shrq $6,%rdx
+ decq %rdx
+ js .Lhandle_tail
+
+ .p2align 4
+.Lloop:
+.Ls1: movq (%rsi),%r11
+.Ls2: movq 1*8(%rsi),%r8
+.Ls3: movq 2*8(%rsi),%r9
+.Ls4: movq 3*8(%rsi),%r10
+.Ld1: movq %r11,(%rdi)
+.Ld2: movq %r8,1*8(%rdi)
+.Ld3: movq %r9,2*8(%rdi)
+.Ld4: movq %r10,3*8(%rdi)
+
+.Ls5: movq 4*8(%rsi),%r11
+.Ls6: movq 5*8(%rsi),%r8
+.Ls7: movq 6*8(%rsi),%r9
+.Ls8: movq 7*8(%rsi),%r10
+.Ld5: movq %r11,4*8(%rdi)
+.Ld6: movq %r8,5*8(%rdi)
+.Ld7: movq %r9,6*8(%rdi)
+.Ld8: movq %r10,7*8(%rdi)
+
+ decq %rdx
+
+ leaq 64(%rsi),%rsi
+ leaq 64(%rdi),%rdi
+
+ jns .Lloop
+
+ .p2align 4
+.Lhandle_tail:
+ movl %ecx,%edx
+ andl $63,%ecx
+ shrl $3,%ecx
+ jz .Lhandle_7
+ movl $8,%ebx
+ .p2align 4
+.Lloop_8:
+.Ls9: movq (%rsi),%r8
+.Ld9: movq %r8,(%rdi)
+ decl %ecx
+ leaq 8(%rdi),%rdi
+ leaq 8(%rsi),%rsi
+ jnz .Lloop_8
+
+.Lhandle_7:
+ movl %edx,%ecx
+ andl $7,%ecx
+ jz .Lende
+ .p2align 4
+.Lloop_1:
+.Ls10: movb (%rsi),%bl
+.Ld10: movb %bl,(%rdi)
+ incq %rdi
+ incq %rsi
+ decl %ecx
+ jnz .Lloop_1
+
+.Lende:
+ popq %rbx
+ ret
+
+#ifdef FIX_ALIGNMENT
+ /* align destination */
+ .p2align 4
+.Lbad_alignment:
+ movl $8,%r9d
+ subl %ecx,%r9d
+ movl %r9d,%ecx
+ cmpq %r9,%rdx
+ jz .Lhandle_7
+ js .Lhandle_7
+.Lalign_1:
+.Ls11: movb (%rsi),%bl
+.Ld11: movb %bl,(%rdi)
+ incq %rsi
+ incq %rdi
+ decl %ecx
+ jnz .Lalign_1
+ subq %r9,%rdx
+ jmp .Lafter_bad_alignment
+#endif
+
+ /* table sorted by exception address */
+ .section __ex_table,"a"
+ .align 8
+ .quad .Ls1,.Ls1e
+ .quad .Ls2,.Ls2e
+ .quad .Ls3,.Ls3e
+ .quad .Ls4,.Ls4e
+ .quad .Ld1,.Ls1e
+ .quad .Ld2,.Ls2e
+ .quad .Ld3,.Ls3e
+ .quad .Ld4,.Ls4e
+ .quad .Ls5,.Ls5e
+ .quad .Ls6,.Ls6e
+ .quad .Ls7,.Ls7e
+ .quad .Ls8,.Ls8e
+ .quad .Ld5,.Ls5e
+ .quad .Ld6,.Ls6e
+ .quad .Ld7,.Ls7e
+ .quad .Ld8,.Ls8e
+ .quad .Ls9,.Le_quad
+ .quad .Ld9,.Le_quad
+ .quad .Ls10,.Le_byte
+ .quad .Ld10,.Le_byte
+#ifdef FIX_ALIGNMENT
+ .quad .Ls11,.Lzero_rest
+ .quad .Ld11,.Lzero_rest
+#endif
+ .quad .Le5,.Le_zero
+ .previous
+
+ /* compute 64-offset for main loop. 8 bytes accuracy with error on the
+ pessimistic side. this is gross. it would be better to fix the
+ interface. */
+ /* eax: zero, ebx: 64 */
+.Ls1e: addl $8,%eax
+.Ls2e: addl $8,%eax
+.Ls3e: addl $8,%eax
+.Ls4e: addl $8,%eax
+.Ls5e: addl $8,%eax
+.Ls6e: addl $8,%eax
+.Ls7e: addl $8,%eax
+.Ls8e: addl $8,%eax
+ addq %rbx,%rdi /* +64 */
+ subq %rax,%rdi /* correct destination with computed offset */
+
+ shlq $6,%rdx /* loop counter * 64 (stride length) */
+ addq %rax,%rdx /* add offset to loopcnt */
+ andl $63,%ecx /* remaining bytes */
+ addq %rcx,%rdx /* add them */
+ jmp .Lzero_rest
+
+ /* exception on quad word loop in tail handling */
+ /* ecx: loopcnt/8, %edx: length, rdi: correct */
+.Le_quad:
+ shll $3,%ecx
+ andl $7,%edx
+ addl %ecx,%edx
+ /* edx: bytes to zero, rdi: dest, eax:zero */
+.Lzero_rest:
+ movq %rdx,%rcx
+.Le_byte:
+ xorl %eax,%eax
+.Le5: rep
+ stosb
+ /* when there is another exception while zeroing the rest just return */
+.Le_zero:
+ movq %rdx,%rax
+ jmp .Lende
+
+ /* Some CPUs run faster using the string copy instructions.
+ This is also a lot simpler. Use them when possible.
+ Patch in jmps to this code instead of copying it fully
+ to avoid unwanted aliasing in the exception tables. */
+
+ /* rdi destination
+ * rsi source
+ * rdx count
+ *
+ * Output:
+ * eax uncopied bytes or 0 if successfull.
+ *
+ * Only 4GB of copy is supported. This shouldn't be a problem
+ * because the kernel normally only writes from/to page sized chunks
+ * even if user space passed a longer buffer.
+ * And more would be dangerous because both Intel and AMD have
+ * errata with rep movsq > 4GB. If someone feels the need to fix
+ * this please consider this.
+ */
+copy_user_generic_c:
movl %edx,%ecx
shrl $3,%ecx
andl $7,%edx
- jz 5f
1: rep
movsq
movl %edx,%ecx
- xor %eax,%eax
2: rep
movsb
- ret
- /* align here? */
-5: xorl %eax,%eax
-6: rep movsq
- ret
-
- .section .fixup,"ax"
-3: lea (%rdx,%rcx,8),%rax
- ret
4: movl %ecx,%eax
ret
- .previous
+3: lea (%rdx,%rcx,8),%rax
+ ret
.section __ex_table,"a"
.quad 1b,3b
.quad 2b,4b
- .quad 6b,4b
.previous
diff --git a/arch/x86_64/lib/iomap_copy.S b/arch/x86_64/lib/iomap_copy.S
new file mode 100644
index 0000000..8bbade5
--- /dev/null
+++ b/arch/x86_64/lib/iomap_copy.S
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2006 PathScale, Inc. All Rights Reserved.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+/*
+ * override generic version in lib/iomap_copy.c
+ */
+ .globl __iowrite32_copy
+ .p2align 4
+__iowrite32_copy:
+ movl %edx,%ecx
+ rep movsd
+ ret
diff --git a/arch/x86_64/lib/memcpy.S b/arch/x86_64/lib/memcpy.S
index 92dd805..5554948 100644
--- a/arch/x86_64/lib/memcpy.S
+++ b/arch/x86_64/lib/memcpy.S
@@ -11,8 +11,6 @@
*
* Output:
* rax original destination
- *
- * TODO: check best memcpy for PSC
*/
.globl __memcpy
@@ -20,6 +18,95 @@
.p2align 4
__memcpy:
memcpy:
+ pushq %rbx
+ movq %rdi,%rax
+
+ movl %edx,%ecx
+ shrl $6,%ecx
+ jz .Lhandle_tail
+
+ .p2align 4
+.Lloop_64:
+ decl %ecx
+
+ movq (%rsi),%r11
+ movq 8(%rsi),%r8
+
+ movq %r11,(%rdi)
+ movq %r8,1*8(%rdi)
+
+ movq 2*8(%rsi),%r9
+ movq 3*8(%rsi),%r10
+
+ movq %r9,2*8(%rdi)
+ movq %r10,3*8(%rdi)
+
+ movq 4*8(%rsi),%r11
+ movq 5*8(%rsi),%r8
+
+ movq %r11,4*8(%rdi)
+ movq %r8,5*8(%rdi)
+
+ movq 6*8(%rsi),%r9
+ movq 7*8(%rsi),%r10
+
+ movq %r9,6*8(%rdi)
+ movq %r10,7*8(%rdi)
+
+ leaq 64(%rsi),%rsi
+ leaq 64(%rdi),%rdi
+ jnz .Lloop_64
+
+.Lhandle_tail:
+ movl %edx,%ecx
+ andl $63,%ecx
+ shrl $3,%ecx
+ jz .Lhandle_7
+ .p2align 4
+.Lloop_8:
+ decl %ecx
+ movq (%rsi),%r8
+ movq %r8,(%rdi)
+ leaq 8(%rdi),%rdi
+ leaq 8(%rsi),%rsi
+ jnz .Lloop_8
+
+.Lhandle_7:
+ movl %edx,%ecx
+ andl $7,%ecx
+ jz .Lende
+ .p2align 4
+.Lloop_1:
+ movb (%rsi),%r8b
+ movb %r8b,(%rdi)
+ incq %rdi
+ incq %rsi
+ decl %ecx
+ jnz .Lloop_1
+
+.Lende:
+ popq %rbx
+ ret
+.Lfinal:
+
+ /* Some CPUs run faster using the string copy instructions.
+ It is also a lot simpler. Use this when possible */
+
+ .section .altinstructions,"a"
+ .align 8
+ .quad memcpy
+ .quad memcpy_c
+ .byte X86_FEATURE_REP_GOOD
+ .byte .Lfinal-memcpy
+ .byte memcpy_c_end-memcpy_c
+ .previous
+
+ .section .altinstr_replacement,"ax"
+ /* rdi destination
+ * rsi source
+ * rdx count
+ */
+memcpy_c:
movq %rdi,%rax
movl %edx,%ecx
shrl $3,%ecx
@@ -30,3 +117,5 @@
rep
movsb
ret
+memcpy_c_end:
+ .previous
diff --git a/arch/x86_64/lib/memset.S b/arch/x86_64/lib/memset.S
index 2aa48f2..ad397f2 100644
--- a/arch/x86_64/lib/memset.S
+++ b/arch/x86_64/lib/memset.S
@@ -13,6 +13,98 @@
.p2align 4
memset:
__memset:
+ movq %rdi,%r10
+ movq %rdx,%r11
+
+ /* expand byte value */
+ movzbl %sil,%ecx
+ movabs $0x0101010101010101,%rax
+ mul %rcx /* with rax, clobbers rdx */
+
+ /* align dst */
+ movl %edi,%r9d
+ andl $7,%r9d
+ jnz .Lbad_alignment
+.Lafter_bad_alignment:
+
+ movl %r11d,%ecx
+ shrl $6,%ecx
+ jz .Lhandle_tail
+
+ .p2align 4
+.Lloop_64:
+ decl %ecx
+ movq %rax,(%rdi)
+ movq %rax,8(%rdi)
+ movq %rax,16(%rdi)
+ movq %rax,24(%rdi)
+ movq %rax,32(%rdi)
+ movq %rax,40(%rdi)
+ movq %rax,48(%rdi)
+ movq %rax,56(%rdi)
+ leaq 64(%rdi),%rdi
+ jnz .Lloop_64
+
+ /* Handle tail in loops. The loops should be faster than hard
+ to predict jump tables. */
+ .p2align 4
+.Lhandle_tail:
+ movl %r11d,%ecx
+ andl $63&(~7),%ecx
+ jz .Lhandle_7
+ shrl $3,%ecx
+ .p2align 4
+.Lloop_8:
+ decl %ecx
+ movq %rax,(%rdi)
+ leaq 8(%rdi),%rdi
+ jnz .Lloop_8
+
+.Lhandle_7:
+ movl %r11d,%ecx
+ andl $7,%ecx
+ jz .Lende
+ .p2align 4
+.Lloop_1:
+ decl %ecx
+ movb %al,(%rdi)
+ leaq 1(%rdi),%rdi
+ jnz .Lloop_1
+
+.Lende:
+ movq %r10,%rax
+ ret
+
+.Lbad_alignment:
+ cmpq $7,%r11
+ jbe .Lhandle_7
+ movq %rax,(%rdi) /* unaligned store */
+ movq $8,%r8
+ subq %r9,%r8
+ addq %r8,%rdi
+ subq %r8,%r11
+ jmp .Lafter_bad_alignment
+
+ /* Some CPUs run faster using the string instructions.
+ It is also a lot simpler. Use this when possible */
+
+#include <asm/cpufeature.h>
+
+ .section .altinstructions,"a"
+ .align 8
+ .quad memset
+ .quad memset_c
+ .byte X86_FEATURE_REP_GOOD
+ .byte memset_c_end-memset_c
+ .byte memset_c_end-memset_c
+ .previous
+
+ .section .altinstr_replacement,"ax"
+ /* rdi destination
+ * rsi value
+ * rdx count
+ */
+memset_c:
movq %rdi,%r9
movl %edx,%r8d
andl $7,%r8d
@@ -29,3 +121,5 @@
stosb
movq %r9,%rax
ret
+memset_c_end:
+ .previous
diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c
index 26eac19..2e7c3c8 100644
--- a/arch/x86_64/mm/fault.c
+++ b/arch/x86_64/mm/fault.c
@@ -33,7 +33,6 @@
#include <asm/proto.h>
#include <asm/kdebug.h>
#include <asm-generic/sections.h>
-#include <asm/kdebug.h>
/* Page fault error code bits */
#define PF_PROT (1<<0) /* or no page found */
@@ -157,8 +156,8 @@
pgd = __va((unsigned long)pgd & PHYSICAL_PAGE_MASK);
pgd += pgd_index(address);
- printk("PGD %lx ", pgd_val(*pgd));
if (bad_address(pgd)) goto bad;
+ printk("PGD %lx ", pgd_val(*pgd));
if (!pgd_present(*pgd)) goto ret;
pud = __pud_offset_k((pud_t *)pgd_page(*pgd), address);
diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c
index 8b7f856..cd25300 100644
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -26,6 +26,10 @@
static struct node nodes[MAX_NUMNODES] __initdata;
static u8 pxm2node[256] = { [0 ... 255] = 0xff };
+/* Too small nodes confuse the VM badly. Usually they result
+ from BIOS bugs. */
+#define NODE_MIN_SIZE (4*1024*1024)
+
static int node_to_pxm(int n);
int pxm_to_node(int pxm)
@@ -131,7 +135,12 @@
acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa)
{
int pxm, node;
- if (srat_disabled() || pa->flags.enabled == 0)
+ if (srat_disabled())
+ return;
+ if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) { bad_srat();
+ return;
+ }
+ if (pa->flags.enabled == 0)
return;
pxm = pa->proximity_domain;
node = setup_node(pxm);
@@ -155,8 +164,16 @@
int node, pxm;
int i;
- if (srat_disabled() || ma->flags.enabled == 0)
+ if (srat_disabled())
return;
+ if (ma->header.length != sizeof(struct acpi_table_memory_affinity)) {
+ bad_srat();
+ return;
+ }
+ if (ma->flags.enabled == 0)
+ return;
+ start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
+ end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
pxm = ma->proximity_domain;
node = setup_node(pxm);
if (node < 0) {
@@ -164,8 +181,6 @@
bad_srat();
return;
}
- start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
- end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
/* It is fine to add this area to the nodes data it will be used later*/
if (ma->flags.hot_pluggable == 1)
printk(KERN_INFO "SRAT: hot plug zone found %lx - %lx \n",
@@ -223,6 +238,16 @@
return 1;
}
+static void unparse_node(int node)
+{
+ int i;
+ node_clear(node, nodes_parsed);
+ for (i = 0; i < MAX_LOCAL_APIC; i++) {
+ if (apicid_to_node[i] == node)
+ apicid_to_node[i] = NUMA_NO_NODE;
+ }
+}
+
void __init acpi_numa_arch_fixup(void) {}
/* Use the information discovered above to actually set up the nodes. */
@@ -230,16 +255,16 @@
{
int i;
+ /* First clean up the node list */
+ for (i = 0; i < MAX_NUMNODES; i++) {
+ cutoff_node(i, start, end);
+ if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE)
+ unparse_node(i);
+ }
+
if (acpi_numa <= 0)
return -1;
- /* First clean up the node list */
- for_each_node_mask(i, nodes_parsed) {
- cutoff_node(i, start, end);
- if (nodes[i].start == nodes[i].end)
- node_clear(i, nodes_parsed);
- }
-
if (!nodes_cover_memory()) {
bad_srat();
return -1;
diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
index f16c0d5..18f371f 100644
--- a/arch/x86_64/pci/mmconfig.c
+++ b/arch/x86_64/pci/mmconfig.c
@@ -29,11 +29,8 @@
while (1) {
++cfg_num;
- if (cfg_num >= pci_mmcfg_config_num) {
- /* Not found - fall back to type 1. This happens
- e.g. on the internal devices of a K8 northbridge. */
- return NULL;
- }
+ if (cfg_num >= pci_mmcfg_config_num)
+ break;
cfg = pci_mmcfg_virt[cfg_num].cfg;
if (cfg->pci_segment_group_number != seg)
continue;
@@ -41,6 +38,18 @@
(cfg->end_bus_number >= bus))
return pci_mmcfg_virt[cfg_num].virt;
}
+
+ /* Handle more broken MCFG tables on Asus etc.
+ They only contain a single entry for bus 0-0. Assume
+ this applies to all busses. */
+ cfg = &pci_mmcfg_config[0];
+ if (pci_mmcfg_config_num == 1 &&
+ cfg->pci_segment_group_number == 0 &&
+ (cfg->start_bus_number | cfg->end_bus_number) == 0)
+ return pci_mmcfg_virt[0].virt;
+
+ /* Fall back to type 0 */
+ return NULL;
}
static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
diff --git a/arch/xtensa/platform-iss/console.c b/arch/xtensa/platform-iss/console.c
index 4fbddf9..94fdfe4 100644
--- a/arch/xtensa/platform-iss/console.c
+++ b/arch/xtensa/platform-iss/console.c
@@ -128,9 +128,7 @@
while (__simc(SYS_select_one, 0, XTISS_SELECT_ONE_READ, (int)&tv,0,0)){
__simc (SYS_read, 0, (unsigned long)&c, 1, 0, 0);
- tty->flip.count++;
- *tty->flip.char_buf_ptr++ = c;
- *tty->flip.flag_buf_ptr++ = TTY_NORMAL;
+ tty_insert_flip_char(tty, c, TTY_NORMAL);
i++;
}
diff --git a/block/elevator.c b/block/elevator.c
index c9f424d..24b702d 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -139,35 +139,16 @@
static char chosen_elevator[16];
-static void elevator_setup_default(void)
+static int __init elevator_setup(char *str)
{
- struct elevator_type *e;
-
- /*
- * If default has not been set, use the compiled-in selection.
- */
- if (!chosen_elevator[0])
- strcpy(chosen_elevator, CONFIG_DEFAULT_IOSCHED);
-
/*
* Be backwards-compatible with previous kernels, so users
* won't get the wrong elevator.
*/
- if (!strcmp(chosen_elevator, "as"))
+ if (!strcmp(str, "as"))
strcpy(chosen_elevator, "anticipatory");
-
- /*
- * If the given scheduler is not available, fall back to the default
- */
- if ((e = elevator_find(chosen_elevator)))
- elevator_put(e);
else
- strcpy(chosen_elevator, CONFIG_DEFAULT_IOSCHED);
-}
-
-static int __init elevator_setup(char *str)
-{
- strncpy(chosen_elevator, str, sizeof(chosen_elevator) - 1);
+ strncpy(chosen_elevator, str, sizeof(chosen_elevator) - 1);
return 0;
}
@@ -184,15 +165,17 @@
q->end_sector = 0;
q->boundary_rq = NULL;
- elevator_setup_default();
-
- if (!name)
- name = chosen_elevator;
-
- e = elevator_get(name);
- if (!e)
+ if (name && !(e = elevator_get(name)))
return -EINVAL;
+ if (!e && *chosen_elevator && !(e = elevator_get(chosen_elevator)))
+ printk("I/O scheduler %s not found\n", chosen_elevator);
+
+ if (!e && !(e = elevator_get(CONFIG_DEFAULT_IOSCHED))) {
+ printk("Default I/O scheduler not found, using no-op\n");
+ e = elevator_get("noop");
+ }
+
eq = kmalloc(sizeof(struct elevator_queue), GFP_KERNEL);
if (!eq) {
elevator_put(e);
@@ -310,7 +293,7 @@
rq->flags &= ~REQ_STARTED;
- __elv_add_request(q, rq, ELEVATOR_INSERT_REQUEUE, 0);
+ elv_insert(q, rq, ELEVATOR_INSERT_REQUEUE);
}
static void elv_drain_elevator(request_queue_t *q)
@@ -327,40 +310,11 @@
}
}
-void __elv_add_request(request_queue_t *q, struct request *rq, int where,
- int plug)
+void elv_insert(request_queue_t *q, struct request *rq, int where)
{
struct list_head *pos;
unsigned ordseq;
- if (q->ordcolor)
- rq->flags |= REQ_ORDERED_COLOR;
-
- if (rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) {
- /*
- * toggle ordered color
- */
- q->ordcolor ^= 1;
-
- /*
- * barriers implicitly indicate back insertion
- */
- if (where == ELEVATOR_INSERT_SORT)
- where = ELEVATOR_INSERT_BACK;
-
- /*
- * this request is scheduling boundary, update end_sector
- */
- if (blk_fs_request(rq)) {
- q->end_sector = rq_end_sector(rq);
- q->boundary_rq = rq;
- }
- } else if (!(rq->flags & REQ_ELVPRIV) && where == ELEVATOR_INSERT_SORT)
- where = ELEVATOR_INSERT_BACK;
-
- if (plug)
- blk_plug_device(q);
-
rq->q = q;
switch (where) {
@@ -441,6 +395,42 @@
}
}
+void __elv_add_request(request_queue_t *q, struct request *rq, int where,
+ int plug)
+{
+ if (q->ordcolor)
+ rq->flags |= REQ_ORDERED_COLOR;
+
+ if (rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) {
+ /*
+ * toggle ordered color
+ */
+ if (blk_barrier_rq(rq))
+ q->ordcolor ^= 1;
+
+ /*
+ * barriers implicitly indicate back insertion
+ */
+ if (where == ELEVATOR_INSERT_SORT)
+ where = ELEVATOR_INSERT_BACK;
+
+ /*
+ * this request is scheduling boundary, update
+ * end_sector
+ */
+ if (blk_fs_request(rq)) {
+ q->end_sector = rq_end_sector(rq);
+ q->boundary_rq = rq;
+ }
+ } else if (!(rq->flags & REQ_ELVPRIV) && where == ELEVATOR_INSERT_SORT)
+ where = ELEVATOR_INSERT_BACK;
+
+ if (plug)
+ blk_plug_device(q);
+
+ elv_insert(q, rq, where);
+}
+
void elv_add_request(request_queue_t *q, struct request *rq, int where,
int plug)
{
@@ -669,8 +659,10 @@
spin_unlock_irq(&elv_list_lock);
printk(KERN_INFO "io scheduler %s registered", e->elevator_name);
- if (!strcmp(e->elevator_name, chosen_elevator))
- printk(" (default)");
+ if (!strcmp(e->elevator_name, chosen_elevator) ||
+ (!*chosen_elevator &&
+ !strcmp(e->elevator_name, CONFIG_DEFAULT_IOSCHED)))
+ printk(" (default)");
printk("\n");
return 0;
}
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index 8e27d0a..03d9c82 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -304,6 +304,7 @@
* blk_queue_ordered - does this queue support ordered writes
* @q: the request queue
* @ordered: one of QUEUE_ORDERED_*
+ * @prepare_flush_fn: rq setup helper for cache flush ordered writes
*
* Description:
* For journalled file systems, doing ordered writes on a commit
@@ -332,6 +333,7 @@
return -EINVAL;
}
+ q->ordered = ordered;
q->next_ordered = ordered;
q->prepare_flush_fn = prepare_flush_fn;
@@ -452,7 +454,7 @@
rq->end_io = end_io;
q->prepare_flush_fn(q, rq);
- __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0);
+ elv_insert(q, rq, ELEVATOR_INSERT_FRONT);
}
static inline struct request *start_ordered(request_queue_t *q,
@@ -488,7 +490,7 @@
else
q->ordseq |= QUEUE_ORDSEQ_POSTFLUSH;
- __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0);
+ elv_insert(q, rq, ELEVATOR_INSERT_FRONT);
if (q->ordered & QUEUE_ORDERED_PREFLUSH) {
queue_flush(q, QUEUE_ORDERED_PREFLUSH);
@@ -506,7 +508,7 @@
int blk_do_ordered(request_queue_t *q, struct request **rqp)
{
- struct request *rq = *rqp, *allowed_rq;
+ struct request *rq = *rqp;
int is_barrier = blk_fs_request(rq) && blk_barrier_rq(rq);
if (!q->ordseq) {
@@ -530,32 +532,26 @@
}
}
+ /*
+ * Ordered sequence in progress
+ */
+
+ /* Special requests are not subject to ordering rules. */
+ if (!blk_fs_request(rq) &&
+ rq != &q->pre_flush_rq && rq != &q->post_flush_rq)
+ return 1;
+
if (q->ordered & QUEUE_ORDERED_TAG) {
+ /* Ordered by tag. Blocking the next barrier is enough. */
if (is_barrier && rq != &q->bar_rq)
*rqp = NULL;
- return 1;
+ } else {
+ /* Ordered by draining. Wait for turn. */
+ WARN_ON(blk_ordered_req_seq(rq) < blk_ordered_cur_seq(q));
+ if (blk_ordered_req_seq(rq) > blk_ordered_cur_seq(q))
+ *rqp = NULL;
}
- switch (blk_ordered_cur_seq(q)) {
- case QUEUE_ORDSEQ_PREFLUSH:
- allowed_rq = &q->pre_flush_rq;
- break;
- case QUEUE_ORDSEQ_BAR:
- allowed_rq = &q->bar_rq;
- break;
- case QUEUE_ORDSEQ_POSTFLUSH:
- allowed_rq = &q->post_flush_rq;
- break;
- default:
- allowed_rq = NULL;
- break;
- }
-
- if (rq != allowed_rq &&
- (blk_fs_request(rq) || rq == &q->pre_flush_rq ||
- rq == &q->post_flush_rq))
- *rqp = NULL;
-
return 1;
}
@@ -662,7 +658,7 @@
* Enables a low level driver to set an upper limit on the size of
* received requests.
**/
-void blk_queue_max_sectors(request_queue_t *q, unsigned short max_sectors)
+void blk_queue_max_sectors(request_queue_t *q, unsigned int max_sectors)
{
if ((max_sectors << 9) < PAGE_CACHE_SIZE) {
max_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
@@ -2577,6 +2573,8 @@
disk->stamp = now;
}
+EXPORT_SYMBOL_GPL(disk_round_stats);
+
/*
* queue lock must be held
*/
@@ -2632,6 +2630,7 @@
/**
* blk_end_sync_rq - executes a completion event on a request
* @rq: request to complete
+ * @error: end io status of the request
*/
void blk_end_sync_rq(struct request *rq, int error)
{
@@ -3153,7 +3152,7 @@
if (blk_fs_request(req) && req->rq_disk) {
const int rw = rq_data_dir(req);
- __disk_stat_add(req->rq_disk, sectors[rw], nr_bytes >> 9);
+ disk_stat_add(req->rq_disk, sectors[rw], nr_bytes >> 9);
}
total_bytes = bio_nbytes = 0;
@@ -3448,7 +3447,7 @@
iocontext_cachep = kmem_cache_create("blkdev_ioc",
sizeof(struct io_context), 0, SLAB_PANIC, NULL, NULL);
- for (i = 0; i < NR_CPUS; i++)
+ for_each_cpu(i)
INIT_LIST_HEAD(&per_cpu(blk_cpu_done, i));
open_softirq(BLOCK_SOFTIRQ, blk_done_softirq, NULL);
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index cc72210..24f7af9 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -310,6 +310,8 @@
if (!rq->timeout)
rq->timeout = BLK_DEFAULT_TIMEOUT;
+ rq->retries = 0;
+
start_time = jiffies;
/* ignore return value. All information is passed back to caller
@@ -427,6 +429,7 @@
rq->data = buffer;
rq->data_len = bytes;
rq->flags |= REQ_BLOCK_PC;
+ rq->retries = 0;
blk_execute_rq(q, bd_disk, rq, 0);
err = rq->errors & 0xff; /* only 8 bit SCSI status */
diff --git a/crypto/scatterwalk.c b/crypto/scatterwalk.c
index 47ac90e..2953e2c 100644
--- a/crypto/scatterwalk.c
+++ b/crypto/scatterwalk.c
@@ -17,7 +17,6 @@
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/highmem.h>
-#include <asm/bug.h>
#include <asm/scatterlist.h>
#include "internal.h"
#include "scatterwalk.h"
diff --git a/drivers/Makefile b/drivers/Makefile
index 619dd96..5c69b86 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -69,7 +69,7 @@
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_MMC) += mmc/
obj-$(CONFIG_INFINIBAND) += infiniband/
-obj-$(CONFIG_SGI_IOC4) += sn/
+obj-$(CONFIG_SGI_SN) += sn/
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
obj-$(CONFIG_SUPERH) += sh/
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 6d61945..0cce28c 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -267,7 +267,6 @@
config ACPI_EC
bool
- depends on X86
default y
help
This driver is required on some systems for the proper operation of
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 2143609..d882bf8 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -71,8 +71,8 @@
struct acpi_memory_device {
acpi_handle handle;
unsigned int state; /* State of the memory device */
- unsigned short cache_attribute; /* memory cache attribute */
- unsigned short read_write_attribute; /* memory read/write attribute */
+ unsigned short caching; /* memory cache attribute */
+ unsigned short write_protect; /* memory read/write attribute */
u64 start_addr; /* Memory Range start physical addr */
u64 end_addr; /* Memory Range end physical addr */
};
@@ -97,12 +97,12 @@
if (ACPI_SUCCESS(status)) {
if (address64.resource_type == ACPI_MEMORY_RANGE) {
/* Populate the structure */
- mem_device->cache_attribute =
- address64.attribute.memory.cache_attribute;
- mem_device->read_write_attribute =
- address64.attribute.memory.read_write_attribute;
- mem_device->start_addr = address64.min_address_range;
- mem_device->end_addr = address64.max_address_range;
+ mem_device->caching =
+ address64.info.mem.caching;
+ mem_device->write_protect =
+ address64.info.mem.write_protect;
+ mem_device->start_addr = address64.minimum;
+ mem_device->end_addr = address64.maximum;
}
}
@@ -250,7 +250,6 @@
int result;
u64 start = mem_device->start_addr;
u64 len = mem_device->end_addr - start + 1;
- unsigned long attr = mem_device->read_write_attribute;
ACPI_FUNCTION_TRACE("acpi_memory_disable_device");
diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c
index fec895a..f4c8775 100644
--- a/drivers/acpi/asus_acpi.c
+++ b/drivers/acpi/asus_acpi.c
@@ -78,9 +78,9 @@
static uid_t asus_uid;
static gid_t asus_gid;
module_param(asus_uid, uint, 0);
-MODULE_PARM_DESC(uid, "UID for entries in /proc/acpi/asus.\n");
+MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus.\n");
module_param(asus_gid, uint, 0);
-MODULE_PARM_DESC(gid, "GID for entries in /proc/acpi/asus.\n");
+MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus.\n");
/* For each model, all features implemented,
* those marked with R are relative to HOTK, A for absolute */
@@ -302,7 +302,7 @@
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
- .display_get = "\\SSTE"},
+ .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"},
{
.name = "M6R",
.mt_mled = "MLED",
@@ -851,6 +851,8 @@
mode = S_IFREG | S_IRUGO | S_IWUGO;
} else {
mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
+ printk(KERN_WARNING " asus_uid and asus_gid parameters are "
+ "deprecated, use chown and chmod instead!\n");
}
acpi_device_dir(device) = asus_proc_dir;
@@ -987,9 +989,21 @@
printk(KERN_NOTICE " BSTS called, 0x%02x returned\n",
bsts_result);
- /* Samsung P30 has a device with a valid _HID whose INIT does not
- * return anything. Catch this one and any similar here */
- if (buffer.pointer == NULL) {
+ /* This is unlikely with implicit return */
+ if (buffer.pointer == NULL)
+ return -EINVAL;
+
+ model = (union acpi_object *) buffer.pointer;
+ /*
+ * Samsung P30 has a device with a valid _HID whose INIT does not
+ * return anything. It used to be possible to catch this exception,
+ * but the implicit return code will now happily confuse the
+ * driver. We assume that every ACPI_TYPE_STRING is a valid model
+ * identifier but it's still possible to get completely bogus data.
+ */
+ if (model->type == ACPI_TYPE_STRING) {
+ printk(KERN_NOTICE " %s model detected, ", model->string.pointer);
+ } else {
if (asus_info && /* Samsung P30 */
strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) {
hotk->model = P30;
@@ -1002,13 +1016,10 @@
"the developers with your DSDT\n");
}
hotk->methods = &model_conf[hotk->model];
- return AE_OK;
- }
+
+ acpi_os_free(model);
- model = (union acpi_object *)buffer.pointer;
- if (model->type == ACPI_TYPE_STRING) {
- printk(KERN_NOTICE " %s model detected, ",
- model->string.pointer);
+ return AE_OK;
}
hotk->model = END_MODEL;
diff --git a/drivers/acpi/dispatcher/dsfield.c b/drivers/acpi/dispatcher/dsfield.c
index 2022aea..76bc046 100644
--- a/drivers/acpi/dispatcher/dsfield.c
+++ b/drivers/acpi/dispatcher/dsfield.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -128,7 +128,7 @@
ACPI_IMODE_LOAD_PASS1, flags, walk_state,
&(node));
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_NSERROR(arg->common.value.string, status);
+ ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
return_ACPI_STATUS(status);
}
}
@@ -232,7 +232,8 @@
+ (acpi_integer) arg->common.value.size;
if (position > ACPI_UINT32_MAX) {
- ACPI_REPORT_ERROR(("Bit offset within field too large (> 0xFFFFFFFF)\n"));
+ ACPI_ERROR((AE_INFO,
+ "Bit offset within field too large (> 0xFFFFFFFF)"));
return_ACPI_STATUS(AE_SUPPORT);
}
@@ -268,8 +269,8 @@
ACPI_NS_DONT_OPEN_SCOPE,
walk_state, &info->field_node);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_NSERROR((char *)&arg->named.name,
- status);
+ ACPI_ERROR_NAMESPACE((char *)&arg->named.name,
+ status);
if (status != AE_ALREADY_EXISTS) {
return_ACPI_STATUS(status);
}
@@ -293,7 +294,11 @@
+ (acpi_integer) arg->common.value.size;
if (position > ACPI_UINT32_MAX) {
- ACPI_REPORT_ERROR(("Field [%4.4s] bit offset too large (> 0xFFFFFFFF)\n", (char *)&info->field_node->name));
+ ACPI_ERROR((AE_INFO,
+ "Field [%4.4s] bit offset too large (> 0xFFFFFFFF)",
+ ACPI_CAST_PTR(char,
+ &info->field_node->
+ name)));
return_ACPI_STATUS(AE_SUPPORT);
}
@@ -302,9 +307,9 @@
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid opcode in field list: %X\n",
- arg->common.aml_opcode));
+ ACPI_ERROR((AE_INFO,
+ "Invalid opcode in field list: %X",
+ arg->common.aml_opcode));
return_ACPI_STATUS(AE_AML_BAD_OPCODE);
}
@@ -349,7 +354,7 @@
ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
walk_state, ®ion_node);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_NSERROR(arg->common.value.name, status);
+ ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
return_ACPI_STATUS(status);
}
}
@@ -431,8 +436,8 @@
ACPI_NS_ERROR_IF_FOUND,
walk_state, &node);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_NSERROR((char *)&arg->named.name,
- status);
+ ACPI_ERROR_NAMESPACE((char *)&arg->named.name,
+ status);
if (status != AE_ALREADY_EXISTS) {
return_ACPI_STATUS(status);
}
@@ -488,7 +493,7 @@
ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
walk_state, ®ion_node);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_NSERROR(arg->common.value.name, status);
+ ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
return_ACPI_STATUS(status);
}
}
@@ -502,7 +507,7 @@
ACPI_NS_SEARCH_PARENT, walk_state,
&info.register_node);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_NSERROR(arg->common.value.string, status);
+ ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
return_ACPI_STATUS(status);
}
@@ -560,7 +565,7 @@
ACPI_NS_SEARCH_PARENT, walk_state,
&info.register_node);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_NSERROR(arg->common.value.string, status);
+ ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
return_ACPI_STATUS(status);
}
@@ -573,7 +578,7 @@
ACPI_NS_SEARCH_PARENT, walk_state,
&info.data_register_node);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_NSERROR(arg->common.value.string, status);
+ ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/dispatcher/dsinit.c b/drivers/acpi/dispatcher/dsinit.c
index 8693c70..e65a07a 100644
--- a/drivers/acpi/dispatcher/dsinit.c
+++ b/drivers/acpi/dispatcher/dsinit.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -84,7 +84,7 @@
acpi_object_type type;
acpi_status status;
- ACPI_FUNCTION_NAME("ds_init_one_object");
+ ACPI_FUNCTION_ENTRY();
/*
* We are only interested in NS nodes owned by the table that
@@ -105,11 +105,10 @@
status = acpi_ds_initialize_region(obj_handle);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Region %p [%4.4s] - Init failure, %s\n",
- obj_handle,
- acpi_ut_get_node_name(obj_handle),
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "During Region initialization %p [%4.4s]",
+ obj_handle,
+ acpi_ut_get_node_name(obj_handle)));
}
info->op_region_count++;
@@ -118,14 +117,6 @@
case ACPI_TYPE_METHOD:
/*
- * Print a dot for each method unless we are going to print
- * the entire pathname
- */
- if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
- ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "."));
- }
-
- /*
* Set the execution data width (32 or 64) based upon the
* revision number of the parent ACPI table.
* TBD: This is really for possible future support of integer width
@@ -134,6 +125,21 @@
if (info->table_desc->pointer->revision == 1) {
node->flags |= ANOBJ_DATA_WIDTH_32;
}
+#ifdef ACPI_INIT_PARSE_METHODS
+ /*
+ * Note 11/2005: Removed this code to parse all methods during table
+ * load because it causes problems if there are any errors during the
+ * parse. Also, it seems like overkill and we probably don't want to
+ * abort a table load because of an issue with a single method.
+ */
+
+ /*
+ * Print a dot for each method unless we are going to print
+ * the entire pathname
+ */
+ if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
+ ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "."));
+ }
/*
* Always parse methods to detect errors, we will delete
@@ -141,15 +147,15 @@
*/
status = acpi_ds_parse_method(obj_handle);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "\n+Method %p [%4.4s] - parse failure, %s\n",
- obj_handle,
- acpi_ut_get_node_name(obj_handle),
- acpi_format_exception(status)));
+ ACPI_ERROR((AE_INFO,
+ "Method %p [%4.4s] - parse failure, %s",
+ obj_handle,
+ acpi_ut_get_node_name(obj_handle),
+ acpi_format_exception(status)));
/* This parse failed, but we will continue parsing more methods */
}
-
+#endif
info->method_count++;
break;
@@ -207,8 +213,7 @@
status = acpi_walk_namespace(ACPI_TYPE_ANY, start_node, ACPI_UINT32_MAX,
acpi_ds_init_one_object, &info, NULL);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "walk_namespace failed, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "During walk_namespace"));
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
diff --git a/drivers/acpi/dispatcher/dsmethod.c b/drivers/acpi/dispatcher/dsmethod.c
index 36c1ca0..c475546 100644
--- a/drivers/acpi/dispatcher/dsmethod.c
+++ b/drivers/acpi/dispatcher/dsmethod.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -47,135 +47,66 @@
#include <acpi/acdispat.h>
#include <acpi/acinterp.h>
#include <acpi/acnamesp.h>
+#include <acpi/acdisasm.h>
#define _COMPONENT ACPI_DISPATCHER
ACPI_MODULE_NAME("dsmethod")
/*******************************************************************************
*
- * FUNCTION: acpi_ds_parse_method
+ * FUNCTION: acpi_ds_method_error
*
- * PARAMETERS: Node - Method node
+ * PARAMETERS: Status - Execution status
+ * walk_state - Current state
*
* RETURN: Status
*
- * DESCRIPTION: Parse the AML that is associated with the method.
+ * DESCRIPTION: Called on method error. Invoke the global exception handler if
+ * present, dump the method data if the disassembler is configured
*
- * MUTEX: Assumes parser is locked
+ * Note: Allows the exception handler to change the status code
*
******************************************************************************/
-acpi_status acpi_ds_parse_method(struct acpi_namespace_node *node)
+acpi_status
+acpi_ds_method_error(acpi_status status, struct acpi_walk_state *walk_state)
{
- acpi_status status;
- union acpi_operand_object *obj_desc;
- union acpi_parse_object *op;
- struct acpi_walk_state *walk_state;
+ ACPI_FUNCTION_ENTRY();
- ACPI_FUNCTION_TRACE_PTR("ds_parse_method", node);
+ /* Ignore AE_OK and control exception codes */
- /* Parameter Validation */
-
- if (!node) {
- return_ACPI_STATUS(AE_NULL_ENTRY);
+ if (ACPI_SUCCESS(status) || (status & AE_CODE_CONTROL)) {
+ return (status);
}
- ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
- "**** Parsing [%4.4s] **** named_obj=%p\n",
- acpi_ut_get_node_name(node), node));
+ /* Invoke the global exception handler */
- /* Extract the method object from the method Node */
+ if (acpi_gbl_exception_handler) {
+ /* Exit the interpreter, allow handler to execute methods */
- obj_desc = acpi_ns_get_attached_object(node);
- if (!obj_desc) {
- return_ACPI_STATUS(AE_NULL_OBJECT);
+ acpi_ex_exit_interpreter();
+
+ /*
+ * Handler can map the exception code to anything it wants, including
+ * AE_OK, in which case the executing method will not be aborted.
+ */
+ status = acpi_gbl_exception_handler(status,
+ walk_state->method_node ?
+ walk_state->method_node->
+ name.integer : 0,
+ walk_state->opcode,
+ walk_state->aml_offset,
+ NULL);
+ (void)acpi_ex_enter_interpreter();
}
-
- /* Create a mutex for the method if there is a concurrency limit */
-
- if ((obj_desc->method.concurrency != ACPI_INFINITE_CONCURRENCY) &&
- (!obj_desc->method.semaphore)) {
- status = acpi_os_create_semaphore(obj_desc->method.concurrency,
- obj_desc->method.concurrency,
- &obj_desc->method.semaphore);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
-
- /*
- * Allocate a new parser op to be the root of the parsed
- * method tree
- */
- op = acpi_ps_alloc_op(AML_METHOD_OP);
- if (!op) {
- return_ACPI_STATUS(AE_NO_MEMORY);
- }
-
- /* Init new op with the method name and pointer back to the Node */
-
- acpi_ps_set_name(op, node->name.integer);
- op->common.node = node;
-
- /*
- * Get a new owner_id for objects created by this method. Namespace
- * objects (such as Operation Regions) can be created during the
- * first pass parse.
- */
- status = acpi_ut_allocate_owner_id(&obj_desc->method.owner_id);
+#ifdef ACPI_DISASSEMBLER
if (ACPI_FAILURE(status)) {
- goto cleanup;
+ /* Display method locals/args if disassembler is present */
+
+ acpi_dm_dump_method_info(status, walk_state, walk_state->op);
}
+#endif
- /* Create and initialize a new walk state */
-
- walk_state =
- acpi_ds_create_walk_state(obj_desc->method.owner_id, NULL, NULL,
- NULL);
- if (!walk_state) {
- status = AE_NO_MEMORY;
- goto cleanup2;
- }
-
- status = acpi_ds_init_aml_walk(walk_state, op, node,
- obj_desc->method.aml_start,
- obj_desc->method.aml_length, NULL, 1);
- if (ACPI_FAILURE(status)) {
- acpi_ds_delete_walk_state(walk_state);
- goto cleanup2;
- }
-
- /*
- * Parse the method, first pass
- *
- * The first pass load is where newly declared named objects are added into
- * the namespace. Actual evaluation of the named objects (what would be
- * called a "second pass") happens during the actual execution of the
- * method so that operands to the named objects can take on dynamic
- * run-time values.
- */
- status = acpi_ps_parse_aml(walk_state);
- if (ACPI_FAILURE(status)) {
- goto cleanup2;
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
- "**** [%4.4s] Parsed **** named_obj=%p Op=%p\n",
- acpi_ut_get_node_name(node), node, op));
-
- /*
- * Delete the parse tree. We simply re-parse the method for every
- * execution since there isn't much overhead (compared to keeping lots
- * of parse trees around)
- */
- acpi_ns_delete_namespace_subtree(node);
- acpi_ns_delete_namespace_by_owner(obj_desc->method.owner_id);
-
- cleanup2:
- acpi_ut_release_owner_id(&obj_desc->method.owner_id);
-
- cleanup:
- acpi_ps_delete_parse_tree(op);
- return_ACPI_STATUS(status);
+ return (status);
}
/*******************************************************************************
@@ -195,9 +126,9 @@
******************************************************************************/
acpi_status
-acpi_ds_begin_method_execution(struct acpi_namespace_node *method_node,
- union acpi_operand_object *obj_desc,
- struct acpi_namespace_node *calling_method_node)
+acpi_ds_begin_method_execution(struct acpi_namespace_node * method_node,
+ union acpi_operand_object * obj_desc,
+ struct acpi_namespace_node * calling_method_node)
{
acpi_status status = AE_OK;
@@ -210,7 +141,8 @@
/* Prevent wraparound of thread count */
if (obj_desc->method.thread_count == ACPI_UINT8_MAX) {
- ACPI_REPORT_ERROR(("Method reached maximum reentrancy limit (255)\n"));
+ ACPI_ERROR((AE_INFO,
+ "Method reached maximum reentrancy limit (255)"));
return_ACPI_STATUS(AE_AML_METHOD_LIMIT);
}
@@ -539,22 +471,61 @@
acpi_os_signal_semaphore(walk_state->method_desc->method.
semaphore, 1);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not signal method semaphore\n"));
+ ACPI_ERROR((AE_INFO,
+ "Could not signal method semaphore"));
/* Ignore error and continue cleanup */
}
}
+ /*
+ * There are no more threads executing this method. Perform
+ * additional cleanup.
+ *
+ * The method Node is stored in the walk state
+ */
+ method_node = walk_state->method_node;
+
+ /* Lock namespace for possible update */
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+ if (ACPI_FAILURE(status)) {
+ goto exit;
+ }
+
+ /*
+ * Delete any namespace entries created immediately underneath
+ * the method
+ */
+ if (method_node->child) {
+ acpi_ns_delete_namespace_subtree(method_node);
+ }
+
+ /*
+ * Delete any namespace entries created anywhere else within
+ * the namespace by the execution of this method
+ */
+ acpi_ns_delete_namespace_by_owner(walk_state->method_desc->method.
+ owner_id);
+ status = acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+
+ /* Are there any other threads currently executing this method? */
+
if (walk_state->method_desc->method.thread_count) {
+ /*
+ * Additional threads. Do not release the owner_id in this case,
+ * we immediately reuse it for the next thread executing this method
+ */
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
- "*** Not deleting method namespace, there are still %d threads\n",
+ "*** Completed execution of one thread, %d threads remaining\n",
walk_state->method_desc->method.
thread_count));
- } else { /* This is the last executing thread */
+ } else {
+ /* This is the only executing thread for this method */
/*
* Support to dynamically change a method from not_serialized to
- * Serialized if it appears that the method is written foolishly and
+ * Serialized if it appears that the method is incorrectly written and
* does not support multiple thread execution. The best example of this
* is if such a method creates namespace objects and blocks. A second
* thread will fail with an AE_ALREADY_EXISTS exception
@@ -570,34 +541,8 @@
semaphore);
}
- /*
- * There are no more threads executing this method. Perform
- * additional cleanup.
- *
- * The method Node is stored in the walk state
- */
- method_node = walk_state->method_node;
+ /* No more threads, we can free the owner_id */
- /*
- * Delete any namespace entries created immediately underneath
- * the method
- */
- status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(status)) {
- goto exit;
- }
-
- if (method_node->child) {
- acpi_ns_delete_namespace_subtree(method_node);
- }
-
- /*
- * Delete any namespace entries created anywhere else within
- * the namespace
- */
- acpi_ns_delete_namespace_by_owner(walk_state->method_desc->
- method.owner_id);
- status = acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
acpi_ut_release_owner_id(&walk_state->method_desc->method.
owner_id);
}
@@ -606,3 +551,140 @@
(void)acpi_ut_release_mutex(ACPI_MTX_PARSER);
return_VOID;
}
+
+#ifdef ACPI_INIT_PARSE_METHODS
+ /*
+ * Note 11/2005: Removed this code to parse all methods during table
+ * load because it causes problems if there are any errors during the
+ * parse. Also, it seems like overkill and we probably don't want to
+ * abort a table load because of an issue with a single method.
+ */
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ds_parse_method
+ *
+ * PARAMETERS: Node - Method node
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Parse the AML that is associated with the method.
+ *
+ * MUTEX: Assumes parser is locked
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ds_parse_method(struct acpi_namespace_node *node)
+{
+ acpi_status status;
+ union acpi_operand_object *obj_desc;
+ union acpi_parse_object *op;
+ struct acpi_walk_state *walk_state;
+
+ ACPI_FUNCTION_TRACE_PTR("ds_parse_method", node);
+
+ /* Parameter Validation */
+
+ if (!node) {
+ return_ACPI_STATUS(AE_NULL_ENTRY);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
+ "**** Parsing [%4.4s] **** named_obj=%p\n",
+ acpi_ut_get_node_name(node), node));
+
+ /* Extract the method object from the method Node */
+
+ obj_desc = acpi_ns_get_attached_object(node);
+ if (!obj_desc) {
+ return_ACPI_STATUS(AE_NULL_OBJECT);
+ }
+
+ /* Create a mutex for the method if there is a concurrency limit */
+
+ if ((obj_desc->method.concurrency != ACPI_INFINITE_CONCURRENCY) &&
+ (!obj_desc->method.semaphore)) {
+ status = acpi_os_create_semaphore(obj_desc->method.concurrency,
+ obj_desc->method.concurrency,
+ &obj_desc->method.semaphore);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ /*
+ * Allocate a new parser op to be the root of the parsed
+ * method tree
+ */
+ op = acpi_ps_alloc_op(AML_METHOD_OP);
+ if (!op) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ /* Init new op with the method name and pointer back to the Node */
+
+ acpi_ps_set_name(op, node->name.integer);
+ op->common.node = node;
+
+ /*
+ * Get a new owner_id for objects created by this method. Namespace
+ * objects (such as Operation Regions) can be created during the
+ * first pass parse.
+ */
+ status = acpi_ut_allocate_owner_id(&obj_desc->method.owner_id);
+ if (ACPI_FAILURE(status)) {
+ goto cleanup;
+ }
+
+ /* Create and initialize a new walk state */
+
+ walk_state =
+ acpi_ds_create_walk_state(obj_desc->method.owner_id, NULL, NULL,
+ NULL);
+ if (!walk_state) {
+ status = AE_NO_MEMORY;
+ goto cleanup2;
+ }
+
+ status = acpi_ds_init_aml_walk(walk_state, op, node,
+ obj_desc->method.aml_start,
+ obj_desc->method.aml_length, NULL, 1);
+ if (ACPI_FAILURE(status)) {
+ acpi_ds_delete_walk_state(walk_state);
+ goto cleanup2;
+ }
+
+ /*
+ * Parse the method, first pass
+ *
+ * The first pass load is where newly declared named objects are added into
+ * the namespace. Actual evaluation of the named objects (what would be
+ * called a "second pass") happens during the actual execution of the
+ * method so that operands to the named objects can take on dynamic
+ * run-time values.
+ */
+ status = acpi_ps_parse_aml(walk_state);
+ if (ACPI_FAILURE(status)) {
+ goto cleanup2;
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
+ "**** [%4.4s] Parsed **** named_obj=%p Op=%p\n",
+ acpi_ut_get_node_name(node), node, op));
+
+ /*
+ * Delete the parse tree. We simply re-parse the method for every
+ * execution since there isn't much overhead (compared to keeping lots
+ * of parse trees around)
+ */
+ acpi_ns_delete_namespace_subtree(node);
+ acpi_ns_delete_namespace_by_owner(obj_desc->method.owner_id);
+
+ cleanup2:
+ acpi_ut_release_owner_id(&obj_desc->method.owner_id);
+
+ cleanup:
+ acpi_ps_delete_parse_tree(op);
+ return_ACPI_STATUS(status);
+}
+#endif
diff --git a/drivers/acpi/dispatcher/dsmthdat.c b/drivers/acpi/dispatcher/dsmthdat.c
index 4095ce7..c025674 100644
--- a/drivers/acpi/dispatcher/dsmthdat.c
+++ b/drivers/acpi/dispatcher/dsmthdat.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -260,9 +260,9 @@
case AML_LOCAL_OP:
if (index > ACPI_METHOD_MAX_LOCAL) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Local index %d is invalid (max %d)\n",
- index, ACPI_METHOD_MAX_LOCAL));
+ ACPI_ERROR((AE_INFO,
+ "Local index %d is invalid (max %d)",
+ index, ACPI_METHOD_MAX_LOCAL));
return_ACPI_STATUS(AE_AML_INVALID_INDEX);
}
@@ -274,9 +274,9 @@
case AML_ARG_OP:
if (index > ACPI_METHOD_MAX_ARG) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Arg index %d is invalid (max %d)\n",
- index, ACPI_METHOD_MAX_ARG));
+ ACPI_ERROR((AE_INFO,
+ "Arg index %d is invalid (max %d)",
+ index, ACPI_METHOD_MAX_ARG));
return_ACPI_STATUS(AE_AML_INVALID_INDEX);
}
@@ -286,8 +286,7 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Opcode %d is invalid\n",
- opcode));
+ ACPI_ERROR((AE_INFO, "Opcode %d is invalid", opcode));
return_ACPI_STATUS(AE_AML_BAD_OPCODE);
}
@@ -378,8 +377,7 @@
/* Validate the object descriptor */
if (!dest_desc) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Null object descriptor pointer\n"));
+ ACPI_ERROR((AE_INFO, "Null object descriptor pointer"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
@@ -424,23 +422,24 @@
switch (opcode) {
case AML_ARG_OP:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Uninitialized Arg[%d] at node %p\n",
- index, node));
+ ACPI_ERROR((AE_INFO,
+ "Uninitialized Arg[%d] at node %p",
+ index, node));
return_ACPI_STATUS(AE_AML_UNINITIALIZED_ARG);
case AML_LOCAL_OP:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Uninitialized Local[%d] at node %p\n",
- index, node));
+ ACPI_ERROR((AE_INFO,
+ "Uninitialized Local[%d] at node %p",
+ index, node));
return_ACPI_STATUS(AE_AML_UNINITIALIZED_LOCAL);
default:
- ACPI_REPORT_ERROR(("Not Arg/Local opcode: %X\n",
- opcode));
+ ACPI_ERROR((AE_INFO,
+ "Not a Arg/Local opcode: %X",
+ opcode));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
}
diff --git a/drivers/acpi/dispatcher/dsobject.c b/drivers/acpi/dispatcher/dsobject.c
index 8ac0cd9..8b21f0f 100644
--- a/drivers/acpi/dispatcher/dsobject.c
+++ b/drivers/acpi/dispatcher/dsobject.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -51,6 +51,7 @@
#define _COMPONENT ACPI_DISPATCHER
ACPI_MODULE_NAME("dsobject")
+/* Local prototypes */
static acpi_status
acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
union acpi_parse_object *op,
@@ -85,7 +86,7 @@
*obj_desc_ptr = NULL;
if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
/*
- * This is an named object reference. If this name was
+ * This is a named object reference. If this name was
* previously looked up in the namespace, it was stored in this op.
* Otherwise, go ahead and look it up now
*/
@@ -96,18 +97,48 @@
ACPI_IMODE_EXECUTE,
ACPI_NS_SEARCH_PARENT |
ACPI_NS_DONT_OPEN_SCOPE, NULL,
- (struct acpi_namespace_node **)
- &(op->common.node));
-
+ ACPI_CAST_INDIRECT_PTR(struct
+ acpi_namespace_node,
+ &(op->
+ common.
+ node)));
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_NSERROR(op->common.value.string,
- status);
+ /* Check if we are resolving a named reference within a package */
+
+ if ((status == AE_NOT_FOUND)
+ && (acpi_gbl_enable_interpreter_slack)
+ &&
+ ((op->common.parent->common.aml_opcode ==
+ AML_PACKAGE_OP)
+ || (op->common.parent->common.aml_opcode ==
+ AML_VAR_PACKAGE_OP))) {
+ /*
+ * We didn't find the target and we are populating elements
+ * of a package - ignore if slack enabled. Some ASL code
+ * contains dangling invalid references in packages and
+ * expects that no exception will be issued. Leave the
+ * element as a null element. It cannot be used, but it
+ * can be overwritten by subsequent ASL code - this is
+ * typically the case.
+ */
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Ignoring unresolved reference in package [%4.4s]\n",
+ walk_state->
+ scope_info->scope.
+ node->name.ascii));
+
+ return_ACPI_STATUS(AE_OK);
+ } else {
+ ACPI_ERROR_NAMESPACE(op->common.value.
+ string, status);
+ }
+
return_ACPI_STATUS(status);
}
}
}
- /* Create and init the internal ACPI object */
+ /* Create and init a new internal ACPI object */
obj_desc = acpi_ut_create_internal_object((acpi_ps_get_opcode_info
(op->common.aml_opcode))->
@@ -157,13 +188,13 @@
ACPI_FUNCTION_TRACE("ds_build_internal_buffer_obj");
+ /*
+ * If we are evaluating a Named buffer object "Name (xxxx, Buffer)".
+ * The buffer object already exists (from the NS node), otherwise it must
+ * be created.
+ */
obj_desc = *obj_desc_ptr;
- if (obj_desc) {
- /*
- * We are evaluating a Named buffer object "Name (xxxx, Buffer)".
- * The buffer object already exists (from the NS node)
- */
- } else {
+ if (!obj_desc) {
/* Create a new buffer object */
obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER);
@@ -183,10 +214,9 @@
byte_list = arg->named.next;
if (byte_list) {
if (byte_list->common.aml_opcode != AML_INT_BYTELIST_OP) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Expecting bytelist, got AML opcode %X in op %p\n",
- byte_list->common.aml_opcode,
- byte_list));
+ ACPI_ERROR((AE_INFO,
+ "Expecting bytelist, got AML opcode %X in op %p",
+ byte_list->common.aml_opcode, byte_list));
acpi_ut_remove_reference(obj_desc);
return (AE_TYPE);
@@ -259,7 +289,7 @@
union acpi_operand_object *obj_desc = NULL;
u32 package_list_length;
acpi_status status = AE_OK;
- u32 i;
+ acpi_native_uint i;
ACPI_FUNCTION_TRACE("ds_build_internal_package_obj");
@@ -271,13 +301,12 @@
parent = parent->common.parent;
}
+ /*
+ * If we are evaluating a Named package object "Name (xxxx, Package)",
+ * the package object already exists, otherwise it must be created.
+ */
obj_desc = *obj_desc_ptr;
- if (obj_desc) {
- /*
- * We are evaluating a Named package object "Name (xxxx, Package)".
- * Get the existing package object from the NS node
- */
- } else {
+ if (!obj_desc) {
obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_PACKAGE);
*obj_desc_ptr = obj_desc;
if (!obj_desc) {
@@ -291,11 +320,9 @@
/* Count the number of items in the package list */
- package_list_length = 0;
arg = op->common.value.arg;
arg = arg->common.next;
- while (arg) {
- package_list_length++;
+ for (package_list_length = 0; arg; package_list_length++) {
arg = arg->common.next;
}
@@ -322,12 +349,11 @@
}
/*
- * Now init the elements of the package
+ * Initialize all elements of the package
*/
- i = 0;
arg = op->common.value.arg;
arg = arg->common.next;
- while (arg) {
+ for (i = 0; arg; i++) {
if (arg->common.aml_opcode == AML_INT_RETURN_VALUE_OP) {
/* Object (package or buffer) is already built */
@@ -340,8 +366,6 @@
package.
elements[i]);
}
-
- i++;
arg = arg->common.next;
}
@@ -518,9 +542,9 @@
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unknown constant opcode %X\n",
- opcode));
+ ACPI_ERROR((AE_INFO,
+ "Unknown constant opcode %X",
+ opcode));
status = AE_AML_OPERAND_TYPE;
break;
}
@@ -535,9 +559,8 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unknown Integer type %X\n",
- op_info->type));
+ ACPI_ERROR((AE_INFO, "Unknown Integer type %X",
+ op_info->type));
status = AE_AML_OPERAND_TYPE;
break;
}
@@ -615,9 +638,8 @@
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unimplemented data type: %X\n",
- ACPI_GET_OBJECT_TYPE(obj_desc)));
+ ACPI_ERROR((AE_INFO, "Unimplemented data type: %X",
+ ACPI_GET_OBJECT_TYPE(obj_desc)));
status = AE_AML_OPERAND_TYPE;
break;
diff --git a/drivers/acpi/dispatcher/dsopcode.c b/drivers/acpi/dispatcher/dsopcode.c
index 939d167..6229c10 100644
--- a/drivers/acpi/dispatcher/dsopcode.c
+++ b/drivers/acpi/dispatcher/dsopcode.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -245,7 +245,9 @@
node = obj_desc->buffer.node;
if (!node) {
- ACPI_REPORT_ERROR(("No pointer back to NS node in buffer obj %p\n", obj_desc));
+ ACPI_ERROR((AE_INFO,
+ "No pointer back to NS node in buffer obj %p",
+ obj_desc));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
@@ -287,8 +289,9 @@
node = obj_desc->package.node;
if (!node) {
- ACPI_REPORT_ERROR(("No pointer back to NS node in package %p\n",
- obj_desc));
+ ACPI_ERROR((AE_INFO,
+ "No pointer back to NS node in package %p",
+ obj_desc));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
@@ -413,9 +416,9 @@
/* Host object must be a Buffer */
if (ACPI_GET_OBJECT_TYPE(buffer_desc) != ACPI_TYPE_BUFFER) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Target of Create Field is not a Buffer object - %s\n",
- acpi_ut_get_object_type_name(buffer_desc)));
+ ACPI_ERROR((AE_INFO,
+ "Target of Create Field is not a Buffer object - %s",
+ acpi_ut_get_object_type_name(buffer_desc)));
status = AE_AML_OPERAND_TYPE;
goto cleanup;
@@ -427,10 +430,10 @@
* after resolution in acpi_ex_resolve_operands().
*/
if (ACPI_GET_DESCRIPTOR_TYPE(result_desc) != ACPI_DESC_TYPE_NAMED) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "(%s) destination not a NS Node [%s]\n",
- acpi_ps_get_opcode_name(aml_opcode),
- acpi_ut_get_descriptor_name(result_desc)));
+ ACPI_ERROR((AE_INFO,
+ "(%s) destination not a NS Node [%s]",
+ acpi_ps_get_opcode_name(aml_opcode),
+ acpi_ut_get_descriptor_name(result_desc)));
status = AE_AML_OPERAND_TYPE;
goto cleanup;
@@ -453,8 +456,8 @@
/* Must have a valid (>0) bit count */
if (bit_count == 0) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Attempt to create_field of length 0\n"));
+ ACPI_ERROR((AE_INFO,
+ "Attempt to create_field of length zero"));
status = AE_AML_OPERAND_VALUE;
goto cleanup;
}
@@ -507,9 +510,8 @@
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unknown field creation opcode %02x\n",
- aml_opcode));
+ ACPI_ERROR((AE_INFO,
+ "Unknown field creation opcode %02x", aml_opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
@@ -517,13 +519,12 @@
/* Entire field must fit within the current length of the buffer */
if ((bit_offset + bit_count) > (8 * (u32) buffer_desc->buffer.length)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Field [%4.4s] size %d exceeds Buffer [%4.4s] size %d (bits)\n",
- acpi_ut_get_node_name(result_desc),
- bit_offset + bit_count,
- acpi_ut_get_node_name(buffer_desc->buffer.
- node),
- 8 * (u32) buffer_desc->buffer.length));
+ ACPI_ERROR((AE_INFO,
+ "Field [%4.4s] at %d exceeds Buffer [%4.4s] size %d (bits)",
+ acpi_ut_get_node_name(result_desc),
+ bit_offset + bit_count,
+ acpi_ut_get_node_name(buffer_desc->buffer.node),
+ 8 * (u32) buffer_desc->buffer.length));
status = AE_AML_BUFFER_LIMIT;
goto cleanup;
}
@@ -629,9 +630,9 @@
"after acpi_ex_resolve_operands");
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "(%s) bad operand(s) (%X)\n",
- acpi_ps_get_opcode_name(op->common.
- aml_opcode), status));
+ ACPI_ERROR((AE_INFO, "(%s) bad operand(s) (%X)",
+ acpi_ps_get_opcode_name(op->common.aml_opcode),
+ status));
return_ACPI_STATUS(status);
}
@@ -1155,9 +1156,8 @@
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unknown control opcode=%X Op=%p\n",
- op->common.aml_opcode, op));
+ ACPI_ERROR((AE_INFO, "Unknown control opcode=%X Op=%p",
+ op->common.aml_opcode, op));
status = AE_AML_BAD_OPCODE;
break;
diff --git a/drivers/acpi/dispatcher/dsutils.c b/drivers/acpi/dispatcher/dsutils.c
index 83ae1c1..53356a5 100644
--- a/drivers/acpi/dispatcher/dsutils.c
+++ b/drivers/acpi/dispatcher/dsutils.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -176,8 +176,8 @@
/* Must have both an Op and a Result Object */
if (!op) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null Op\n"));
- return_VALUE(TRUE);
+ ACPI_ERROR((AE_INFO, "Null Op"));
+ return_UINT8(TRUE);
}
/*
@@ -208,7 +208,7 @@
"At Method level, result of [%s] not used\n",
acpi_ps_get_opcode_name(op->common.
aml_opcode)));
- return_VALUE(FALSE);
+ return_UINT8(FALSE);
}
/* Get info on the parent. The root_op is AML_SCOPE */
@@ -216,9 +216,8 @@
parent_info =
acpi_ps_get_opcode_info(op->common.parent->common.aml_opcode);
if (parent_info->class == AML_CLASS_UNKNOWN) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unknown parent opcode. Op=%p\n", op));
- return_VALUE(FALSE);
+ ACPI_ERROR((AE_INFO, "Unknown parent opcode Op=%p", op));
+ return_UINT8(FALSE);
}
/*
@@ -304,7 +303,7 @@
acpi_ps_get_opcode_name(op->common.parent->common.
aml_opcode), op));
- return_VALUE(TRUE);
+ return_UINT8(TRUE);
result_not_used:
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
@@ -313,7 +312,7 @@
acpi_ps_get_opcode_name(op->common.parent->common.
aml_opcode), op));
- return_VALUE(FALSE);
+ return_UINT8(FALSE);
}
/*******************************************************************************
@@ -344,7 +343,7 @@
ACPI_FUNCTION_TRACE_PTR("ds_delete_result_if_not_used", result_obj);
if (!op) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null Op\n"));
+ ACPI_ERROR((AE_INFO, "Null Op"));
return_VOID;
}
@@ -567,7 +566,7 @@
}
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_NSERROR(name_string, status);
+ ACPI_ERROR_NAMESPACE(name_string, status);
}
}
@@ -616,7 +615,7 @@
if (op_info->flags & AML_HAS_RETVAL) {
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
- "Argument previously created, already stacked \n"));
+ "Argument previously created, already stacked\n"));
ACPI_DEBUGGER_EXEC(acpi_db_display_argument_object
(walk_state->
@@ -635,10 +634,8 @@
* Only error is underflow, and this indicates
* a missing or null operand!
*/
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Missing or null operand, %s\n",
- acpi_format_exception
- (status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Missing or null operand"));
return_ACPI_STATUS(status);
}
} else {
@@ -730,7 +727,7 @@
*/
(void)acpi_ds_obj_stack_pop_and_delete(arg_count, walk_state);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "While creating Arg %d - %s\n",
- (arg_count + 1), acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "While creating Arg %d",
+ (arg_count + 1)));
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/dispatcher/dswexec.c b/drivers/acpi/dispatcher/dswexec.c
index e522763..f1af655 100644
--- a/drivers/acpi/dispatcher/dswexec.c
+++ b/drivers/acpi/dispatcher/dswexec.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -100,9 +100,8 @@
if (result_obj) {
status = acpi_ds_result_pop(&obj_desc, walk_state);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not get result from predicate evaluation, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not get result from predicate evaluation"));
return_ACPI_STATUS(status);
}
@@ -123,9 +122,9 @@
}
if (!obj_desc) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "No predicate obj_desc=%p State=%p\n",
- obj_desc, walk_state));
+ ACPI_ERROR((AE_INFO,
+ "No predicate obj_desc=%p State=%p",
+ obj_desc, walk_state));
return_ACPI_STATUS(AE_AML_NO_OPERAND);
}
@@ -140,10 +139,10 @@
}
if (ACPI_GET_OBJECT_TYPE(local_obj_desc) != ACPI_TYPE_INTEGER) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Bad predicate (not an integer) obj_desc=%p State=%p Type=%X\n",
- obj_desc, walk_state,
- ACPI_GET_OBJECT_TYPE(obj_desc)));
+ ACPI_ERROR((AE_INFO,
+ "Bad predicate (not an integer) obj_desc=%p State=%p Type=%X",
+ obj_desc, walk_state,
+ ACPI_GET_OBJECT_TYPE(obj_desc)));
status = AE_AML_OPERAND_TYPE;
goto cleanup;
@@ -314,12 +313,13 @@
case AML_CLASS_EXECUTE:
case AML_CLASS_CREATE:
-
/*
* Most operators with arguments.
* Start a new result/operand state
*/
- status = acpi_ds_result_stack_push(walk_state);
+ if (walk_state->opcode != AML_CREATE_FIELD_OP) {
+ status = acpi_ds_result_stack_push(walk_state);
+ }
break;
default:
@@ -361,8 +361,8 @@
op_class = walk_state->op_info->class;
if (op_class == AML_CLASS_UNKNOWN) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown opcode %X\n",
- op->common.aml_opcode));
+ ACPI_ERROR((AE_INFO, "Unknown opcode %X",
+ op->common.aml_opcode));
return_ACPI_STATUS(AE_NOT_IMPLEMENTED);
}
@@ -452,12 +452,10 @@
walk_state->operands[1]->reference.offset)) {
status = AE_OK;
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "[%s]: Could not resolve operands, %s\n",
- acpi_ps_get_opcode_name
- (walk_state->opcode),
- acpi_format_exception
- (status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "While resolving operands for [%s]",
+ acpi_ps_get_opcode_name
+ (walk_state->opcode)));
}
}
@@ -676,8 +674,8 @@
case AML_TYPE_UNDEFINED:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Undefined opcode type Op=%p\n", op));
+ ACPI_ERROR((AE_INFO,
+ "Undefined opcode type Op=%p", op));
return_ACPI_STATUS(AE_NOT_IMPLEMENTED);
case AML_TYPE_BOGUS:
@@ -689,10 +687,10 @@
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unimplemented opcode, class=%X type=%X Opcode=%X Op=%p\n",
- op_class, op_type,
- op->common.aml_opcode, op));
+ ACPI_ERROR((AE_INFO,
+ "Unimplemented opcode, class=%X type=%X Opcode=%X Op=%p",
+ op_class, op_type, op->common.aml_opcode,
+ op));
status = AE_NOT_IMPLEMENTED;
break;
@@ -723,20 +721,6 @@
cleanup:
- /* Invoke exception handler on error */
-
- if (ACPI_FAILURE(status) &&
- acpi_gbl_exception_handler && !(status & AE_CODE_CONTROL)) {
- acpi_ex_exit_interpreter();
- status = acpi_gbl_exception_handler(status,
- walk_state->method_node->
- name.integer,
- walk_state->opcode,
- walk_state->aml_offset,
- NULL);
- (void)acpi_ex_enter_interpreter();
- }
-
if (walk_state->result_obj) {
/* Break to debugger to display result */
@@ -758,18 +742,14 @@
}
#endif
+ /* Invoke exception handler on error */
+
+ if (ACPI_FAILURE(status)) {
+ status = acpi_ds_method_error(status, walk_state);
+ }
+
/* Always clear the object stack */
walk_state->num_operands = 0;
-
-#ifdef ACPI_DISASSEMBLER
-
- /* On error, display method locals/args */
-
- if (ACPI_FAILURE(status)) {
- acpi_dm_dump_method_info(status, walk_state, op);
- }
-#endif
-
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/dispatcher/dswload.c b/drivers/acpi/dispatcher/dswload.c
index 4117312..d3d24da 100644
--- a/drivers/acpi/dispatcher/dswload.c
+++ b/drivers/acpi/dispatcher/dswload.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -127,7 +127,7 @@
char *path;
u32 flags;
- ACPI_FUNCTION_NAME("ds_load1_begin_op");
+ ACPI_FUNCTION_TRACE("ds_load1_begin_op");
op = walk_state->op;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
@@ -138,14 +138,14 @@
if (op) {
if (!(walk_state->op_info->flags & AML_NAMED)) {
*out_op = op;
- return (AE_OK);
+ return_ACPI_STATUS(AE_OK);
}
/* Check if this object has already been installed in the namespace */
if (op->common.node) {
*out_op = op;
- return (AE_OK);
+ return_ACPI_STATUS(AE_OK);
}
}
@@ -187,8 +187,8 @@
}
#endif
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_NSERROR(path, status);
- return (status);
+ ACPI_ERROR_NAMESPACE(path, status);
+ return_ACPI_STATUS(status);
}
/*
@@ -233,9 +233,11 @@
/* All other types are an error */
- ACPI_REPORT_ERROR(("Invalid type (%s) for target of Scope operator [%4.4s] (Cannot override)\n", acpi_ut_get_type_name(node->type), path));
+ ACPI_ERROR((AE_INFO,
+ "Invalid type (%s) for target of Scope operator [%4.4s] (Cannot override)",
+ acpi_ut_get_type_name(node->type), path));
- return (AE_AML_OPERAND_TYPE);
+ return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
break;
@@ -257,6 +259,7 @@
* buffer_field, or Package), the name of the object is already
* in the namespace.
*/
+
if (walk_state->deferred_node) {
/* This name is already in the namespace, get the node */
@@ -265,6 +268,16 @@
break;
}
+ /*
+ * If we are executing a method, do not create any namespace objects
+ * during the load phase, only during execution.
+ */
+ if (walk_state->method_node) {
+ node = NULL;
+ status = AE_OK;
+ break;
+ }
+
flags = ACPI_NS_NO_UPSEARCH;
if ((walk_state->opcode != AML_SCOPE_OP) &&
(!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
@@ -289,8 +302,8 @@
ACPI_IMODE_LOAD_PASS1, flags, walk_state,
&(node));
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_NSERROR(path, status);
- return (status);
+ ACPI_ERROR_NAMESPACE(path, status);
+ return_ACPI_STATUS(status);
}
break;
}
@@ -302,28 +315,29 @@
op = acpi_ps_alloc_op(walk_state->opcode);
if (!op) {
- return (AE_NO_MEMORY);
+ return_ACPI_STATUS(AE_NO_MEMORY);
}
}
- /* Initialize */
-
- op->named.name = node->name.integer;
+ /* Initialize the op */
#if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY))
- op->named.path = (u8 *) path;
+ op->named.path = ACPI_CAST_PTR(u8, path);
#endif
- /*
- * Put the Node in the "op" object that the parser uses, so we
- * can get it again quickly when this scope is closed
- */
- op->common.node = node;
+ if (node) {
+ /*
+ * Put the Node in the "op" object that the parser uses, so we
+ * can get it again quickly when this scope is closed
+ */
+ op->common.node = node;
+ op->named.name = node->name.integer;
+ }
+
acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state),
op);
-
*out_op = op;
- return (status);
+ return_ACPI_STATUS(status);
}
/*******************************************************************************
@@ -339,13 +353,13 @@
*
******************************************************************************/
-acpi_status acpi_ds_load1_end_op(struct acpi_walk_state * walk_state)
+acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
{
union acpi_parse_object *op;
acpi_object_type object_type;
acpi_status status = AE_OK;
- ACPI_FUNCTION_NAME("ds_load1_end_op");
+ ACPI_FUNCTION_TRACE("ds_load1_end_op");
op = walk_state->op;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
@@ -354,7 +368,7 @@
/* We are only interested in opcodes that have an associated name */
if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
- return (AE_OK);
+ return_ACPI_STATUS(AE_OK);
}
/* Get the object type to determine if we should pop the scope */
@@ -363,21 +377,37 @@
#ifndef ACPI_NO_METHOD_EXECUTION
if (walk_state->op_info->flags & AML_FIELD) {
- if (walk_state->opcode == AML_FIELD_OP ||
- walk_state->opcode == AML_BANK_FIELD_OP ||
- walk_state->opcode == AML_INDEX_FIELD_OP) {
- status = acpi_ds_init_field_objects(op, walk_state);
+ /*
+ * If we are executing a method, do not create any namespace objects
+ * during the load phase, only during execution.
+ */
+ if (!walk_state->method_node) {
+ if (walk_state->opcode == AML_FIELD_OP ||
+ walk_state->opcode == AML_BANK_FIELD_OP ||
+ walk_state->opcode == AML_INDEX_FIELD_OP) {
+ status =
+ acpi_ds_init_field_objects(op, walk_state);
+ }
}
- return (status);
+ return_ACPI_STATUS(status);
}
- if (op->common.aml_opcode == AML_REGION_OP) {
- status = acpi_ex_create_region(op->named.data, op->named.length,
- (acpi_adr_space_type)
- ((op->common.value.arg)->common.
- value.integer), walk_state);
- if (ACPI_FAILURE(status)) {
- return (status);
+ /*
+ * If we are executing a method, do not create any namespace objects
+ * during the load phase, only during execution.
+ */
+ if (!walk_state->method_node) {
+ if (op->common.aml_opcode == AML_REGION_OP) {
+ status =
+ acpi_ex_create_region(op->named.data,
+ op->named.length,
+ (acpi_adr_space_type)
+ ((op->common.value.arg)->
+ common.value.integer),
+ walk_state);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
}
}
#endif
@@ -391,47 +421,63 @@
common.
aml_opcode))->
object_type;
- op->common.node->type = (u8) object_type;
- }
- }
- if (op->common.aml_opcode == AML_METHOD_OP) {
- /*
- * method_op pkg_length name_string method_flags term_list
- *
- * Note: We must create the method node/object pair as soon as we
- * see the method declaration. This allows later pass1 parsing
- * of invocations of the method (need to know the number of
- * arguments.)
- */
- ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
- "LOADING-Method: State=%p Op=%p named_obj=%p\n",
- walk_state, op, op->named.node));
+ /* Set node type if we have a namespace node */
- if (!acpi_ns_get_attached_object(op->named.node)) {
- walk_state->operands[0] = (void *)op->named.node;
- walk_state->num_operands = 1;
-
- status =
- acpi_ds_create_operands(walk_state,
- op->common.value.arg);
- if (ACPI_SUCCESS(status)) {
- status = acpi_ex_create_method(op->named.data,
- op->named.length,
- walk_state);
- }
- walk_state->operands[0] = NULL;
- walk_state->num_operands = 0;
-
- if (ACPI_FAILURE(status)) {
- return (status);
+ if (op->common.node) {
+ op->common.node->type = (u8) object_type;
}
}
}
- /* Pop the scope stack */
+ /*
+ * If we are executing a method, do not create any namespace objects
+ * during the load phase, only during execution.
+ */
+ if (!walk_state->method_node) {
+ if (op->common.aml_opcode == AML_METHOD_OP) {
+ /*
+ * method_op pkg_length name_string method_flags term_list
+ *
+ * Note: We must create the method node/object pair as soon as we
+ * see the method declaration. This allows later pass1 parsing
+ * of invocations of the method (need to know the number of
+ * arguments.)
+ */
+ ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+ "LOADING-Method: State=%p Op=%p named_obj=%p\n",
+ walk_state, op, op->named.node));
- if (acpi_ns_opens_scope(object_type)) {
+ if (!acpi_ns_get_attached_object(op->named.node)) {
+ walk_state->operands[0] =
+ ACPI_CAST_PTR(void, op->named.node);
+ walk_state->num_operands = 1;
+
+ status =
+ acpi_ds_create_operands(walk_state,
+ op->common.value.
+ arg);
+ if (ACPI_SUCCESS(status)) {
+ status =
+ acpi_ex_create_method(op->named.
+ data,
+ op->named.
+ length,
+ walk_state);
+ }
+ walk_state->operands[0] = NULL;
+ walk_state->num_operands = 0;
+
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+ }
+ }
+
+ /* Pop the scope stack (only if loading a table) */
+
+ if (!walk_state->method_node && acpi_ns_opens_scope(object_type)) {
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"(%s): Popping scope for Op %p\n",
acpi_ut_get_type_name(object_type), op));
@@ -439,7 +485,7 @@
status = acpi_ds_scope_stack_pop(walk_state);
}
- return (status);
+ return_ACPI_STATUS(status);
}
/*******************************************************************************
@@ -456,8 +502,8 @@
******************************************************************************/
acpi_status
-acpi_ds_load2_begin_op(struct acpi_walk_state * walk_state,
- union acpi_parse_object ** out_op)
+acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state,
+ union acpi_parse_object **out_op)
{
union acpi_parse_object *op;
struct acpi_namespace_node *node;
@@ -574,10 +620,10 @@
if (status == AE_NOT_FOUND) {
status = AE_OK;
} else {
- ACPI_REPORT_NSERROR(buffer_ptr, status);
+ ACPI_ERROR_NAMESPACE(buffer_ptr, status);
}
#else
- ACPI_REPORT_NSERROR(buffer_ptr, status);
+ ACPI_ERROR_NAMESPACE(buffer_ptr, status);
#endif
return_ACPI_STATUS(status);
}
@@ -607,7 +653,10 @@
* Scope (DEB) { ... }
*/
- ACPI_REPORT_WARNING(("Type override - [%4.4s] had invalid type (%s) for Scope operator, changed to (Scope)\n", buffer_ptr, acpi_ut_get_type_name(node->type)));
+ ACPI_WARNING((AE_INFO,
+ "Type override - [%4.4s] had invalid type (%s) for Scope operator, changed to (Scope)",
+ buffer_ptr,
+ acpi_ut_get_type_name(node->type)));
node->type = ACPI_TYPE_ANY;
walk_state->scope_info->common.value = ACPI_TYPE_ANY;
@@ -617,7 +666,10 @@
/* All other types are an error */
- ACPI_REPORT_ERROR(("Invalid type (%s) for target of Scope operator [%4.4s]\n", acpi_ut_get_type_name(node->type), buffer_ptr));
+ ACPI_ERROR((AE_INFO,
+ "Invalid type (%s) for target of Scope operator [%4.4s]",
+ acpi_ut_get_type_name(node->type),
+ buffer_ptr));
return (AE_AML_OPERAND_TYPE);
}
@@ -670,7 +722,7 @@
}
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_NSERROR(buffer_ptr, status);
+ ACPI_ERROR_NAMESPACE(buffer_ptr, status);
return_ACPI_STATUS(status);
}
@@ -840,6 +892,13 @@
case AML_TYPE_NAMED_FIELD:
+ /*
+ * If we are executing a method, initialize the field
+ */
+ if (walk_state->method_node) {
+ status = acpi_ds_init_field_objects(op, walk_state);
+ }
+
switch (op->common.aml_opcode) {
case AML_INDEX_FIELD_OP:
@@ -929,6 +988,24 @@
switch (op->common.aml_opcode) {
#ifndef ACPI_NO_METHOD_EXECUTION
case AML_REGION_OP:
+
+ /*
+ * If we are executing a method, initialize the region
+ */
+ if (walk_state->method_node) {
+ status =
+ acpi_ex_create_region(op->named.data,
+ op->named.length,
+ (acpi_adr_space_type)
+ ((op->common.value.
+ arg)->common.value.
+ integer),
+ walk_state);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ }
+
/*
* The op_region is not fully parsed at this time. Only valid
* argument is the space_id. (We must save the address of the
@@ -957,11 +1034,50 @@
status = acpi_ds_create_node(walk_state, node, op);
break;
+
+ case AML_METHOD_OP:
+ /*
+ * method_op pkg_length name_string method_flags term_list
+ *
+ * Note: We must create the method node/object pair as soon as we
+ * see the method declaration. This allows later pass1 parsing
+ * of invocations of the method (need to know the number of
+ * arguments.)
+ */
+ ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+ "LOADING-Method: State=%p Op=%p named_obj=%p\n",
+ walk_state, op, op->named.node));
+
+ if (!acpi_ns_get_attached_object(op->named.node)) {
+ walk_state->operands[0] =
+ ACPI_CAST_PTR(void, op->named.node);
+ walk_state->num_operands = 1;
+
+ status =
+ acpi_ds_create_operands(walk_state,
+ op->common.value.
+ arg);
+ if (ACPI_SUCCESS(status)) {
+ status =
+ acpi_ex_create_method(op->named.
+ data,
+ op->named.
+ length,
+ walk_state);
+ }
+ walk_state->operands[0] = NULL;
+ walk_state->num_operands = 0;
+
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+ break;
+
#endif /* ACPI_NO_METHOD_EXECUTION */
default:
/* All NAMED_COMPLEX opcodes must be handled above */
- /* Note: Method objects were already created in Pass 1 */
break;
}
break;
@@ -1004,7 +1120,7 @@
*/
op->common.node = new_node;
} else {
- ACPI_REPORT_NSERROR(arg->common.value.string, status);
+ ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
}
break;
diff --git a/drivers/acpi/dispatcher/dswscope.c b/drivers/acpi/dispatcher/dswscope.c
index defe956..ada21ef 100644
--- a/drivers/acpi/dispatcher/dswscope.c
+++ b/drivers/acpi/dispatcher/dswscope.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -107,14 +107,14 @@
if (!node) {
/* Invalid scope */
- ACPI_REPORT_ERROR(("ds_scope_stack_push: null scope passed\n"));
+ ACPI_ERROR((AE_INFO, "Null scope parameter"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Make sure object type is valid */
if (!acpi_ut_valid_object_type(type)) {
- ACPI_REPORT_WARNING(("ds_scope_stack_push: Invalid object type: 0x%X\n", type));
+ ACPI_WARNING((AE_INFO, "Invalid object type: 0x%X", type));
}
/* Allocate a new scope object */
diff --git a/drivers/acpi/dispatcher/dswstate.c b/drivers/acpi/dispatcher/dswstate.c
index 7d68a5a..fa78cb7 100644
--- a/drivers/acpi/dispatcher/dswstate.c
+++ b/drivers/acpi/dispatcher/dswstate.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -92,26 +92,23 @@
state = walk_state->results;
if (!state) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "No result object pushed! State=%p\n",
- walk_state));
+ ACPI_ERROR((AE_INFO, "No result object pushed! State=%p",
+ walk_state));
return (AE_NOT_EXIST);
}
if (index >= ACPI_OBJ_MAX_OPERAND) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Index out of range: %X State=%p Num=%X\n",
- index, walk_state,
- state->results.num_results));
+ ACPI_ERROR((AE_INFO,
+ "Index out of range: %X State=%p Num=%X",
+ index, walk_state, state->results.num_results));
}
/* Check for a valid result object */
if (!state->results.obj_desc[index]) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Null operand! State=%p #Ops=%X, Index=%X\n",
- walk_state, state->results.num_results,
- index));
+ ACPI_ERROR((AE_INFO,
+ "Null operand! State=%p #Ops=%X, Index=%X",
+ walk_state, state->results.num_results, index));
return (AE_AML_NO_RETURN_VALUE);
}
@@ -163,9 +160,8 @@
}
if (!state->results.num_results) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Result stack is empty! State=%p\n",
- walk_state));
+ ACPI_ERROR((AE_INFO, "Result stack is empty! State=%p",
+ walk_state));
return (AE_AML_NO_RETURN_VALUE);
}
@@ -192,8 +188,7 @@
}
}
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "No result objects! State=%p\n", walk_state));
+ ACPI_ERROR((AE_INFO, "No result objects! State=%p", walk_state));
return (AE_AML_NO_RETURN_VALUE);
}
@@ -222,15 +217,14 @@
state = walk_state->results;
if (!state) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Warning: No result object pushed! State=%p\n",
- walk_state));
+ ACPI_ERROR((AE_INFO,
+ "No result object pushed! State=%p", walk_state));
return (AE_NOT_EXIST);
}
if (!state->results.num_results) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "No result objects! State=%p\n", walk_state));
+ ACPI_ERROR((AE_INFO, "No result objects! State=%p",
+ walk_state));
return (AE_AML_NO_RETURN_VALUE);
}
@@ -250,10 +244,10 @@
/* Check for a valid result object */
if (!*object) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Null operand! State=%p #Ops=%X Index=%X\n",
- walk_state, state->results.num_results,
- (u32) index));
+ ACPI_ERROR((AE_INFO,
+ "Null operand! State=%p #Ops=%X Index=%X",
+ walk_state, state->results.num_results,
+ (u32) index));
return (AE_AML_NO_RETURN_VALUE);
}
@@ -288,23 +282,21 @@
state = walk_state->results;
if (!state) {
- ACPI_REPORT_ERROR(("No result stack frame during push\n"));
+ ACPI_ERROR((AE_INFO, "No result stack frame during push"));
return (AE_AML_INTERNAL);
}
if (state->results.num_results == ACPI_OBJ_NUM_OPERANDS) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Result stack overflow: Obj=%p State=%p Num=%X\n",
- object, walk_state,
- state->results.num_results));
+ ACPI_ERROR((AE_INFO,
+ "Result stack overflow: Obj=%p State=%p Num=%X",
+ object, walk_state, state->results.num_results));
return (AE_STACK_OVERFLOW);
}
if (!object) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Null Object! Obj=%p State=%p Num=%X\n",
- object, walk_state,
- state->results.num_results));
+ ACPI_ERROR((AE_INFO,
+ "Null Object! Obj=%p State=%p Num=%X",
+ object, walk_state, state->results.num_results));
return (AE_BAD_PARAMETER);
}
@@ -413,10 +405,9 @@
/* Check for stack overflow */
if (walk_state->num_operands >= ACPI_OBJ_NUM_OPERANDS) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "overflow! Obj=%p State=%p #Ops=%X\n",
- object, walk_state,
- walk_state->num_operands));
+ ACPI_ERROR((AE_INFO,
+ "Object stack overflow! Obj=%p State=%p #Ops=%X",
+ object, walk_state, walk_state->num_operands));
return (AE_STACK_OVERFLOW);
}
@@ -460,10 +451,10 @@
/* Check for stack underflow */
if (walk_state->num_operands == 0) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Underflow! Count=%X State=%p #Ops=%X\n",
- pop_count, walk_state,
- walk_state->num_operands));
+ ACPI_ERROR((AE_INFO,
+ "Object stack underflow! Count=%X State=%p #Ops=%X",
+ pop_count, walk_state,
+ walk_state->num_operands));
return (AE_STACK_UNDERFLOW);
}
@@ -506,10 +497,10 @@
/* Check for stack underflow */
if (walk_state->num_operands == 0) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Underflow! Count=%X State=%p #Ops=%X\n",
- pop_count, walk_state,
- walk_state->num_operands));
+ ACPI_ERROR((AE_INFO,
+ "Object stack underflow! Count=%X State=%p #Ops=%X",
+ pop_count, walk_state,
+ walk_state->num_operands));
return (AE_STACK_UNDERFLOW);
}
@@ -826,16 +817,14 @@
}
if (walk_state->data_type != ACPI_DESC_TYPE_WALK) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "%p is not a valid walk state\n",
- walk_state));
+ ACPI_ERROR((AE_INFO, "%p is not a valid walk state",
+ walk_state));
return;
}
if (walk_state->parser_state.scope) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "%p walk still has a scope list\n",
- walk_state));
+ ACPI_ERROR((AE_INFO, "%p walk still has a scope list",
+ walk_state));
}
/* Always must free any linked control states */
@@ -894,25 +883,24 @@
state = walk_state->results;
if (!state) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "No result object pushed! State=%p\n",
- walk_state));
+ ACPI_ERROR((AE_INFO, "No result object pushed! State=%p",
+ walk_state));
return (AE_NOT_EXIST);
}
if (index >= ACPI_OBJ_NUM_OPERANDS) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Index out of range: %X Obj=%p State=%p Num=%X\n",
- index, object, walk_state,
- state->results.num_results));
+ ACPI_ERROR((AE_INFO,
+ "Index out of range: %X Obj=%p State=%p Num=%X",
+ index, object, walk_state,
+ state->results.num_results));
return (AE_BAD_PARAMETER);
}
if (!object) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Null Object! Index=%X Obj=%p State=%p Num=%X\n",
- index, object, walk_state,
- state->results.num_results));
+ ACPI_ERROR((AE_INFO,
+ "Null Object! Index=%X Obj=%p State=%p Num=%X",
+ index, object, walk_state,
+ state->results.num_results));
return (AE_BAD_PARAMETER);
}
@@ -986,9 +974,9 @@
/* Check for stack underflow */
if (walk_state->num_operands == 0) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Missing operand/stack empty! State=%p #Ops=%X\n",
- walk_state, walk_state->num_operands));
+ ACPI_ERROR((AE_INFO,
+ "Missing operand/stack empty! State=%p #Ops=%X",
+ walk_state, walk_state->num_operands));
*object = NULL;
return (AE_AML_NO_OPERAND);
}
@@ -1000,9 +988,9 @@
/* Check for a valid operand */
if (!walk_state->operands[walk_state->num_operands]) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Null operand! State=%p #Ops=%X\n",
- walk_state, walk_state->num_operands));
+ ACPI_ERROR((AE_INFO,
+ "Null operand! State=%p #Ops=%X",
+ walk_state, walk_state->num_operands));
*object = NULL;
return (AE_AML_NO_OPERAND);
}
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 3758b55..79b09d7 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -60,20 +60,20 @@
#define ACPI_EC_BURST_ENABLE 0x82
#define ACPI_EC_BURST_DISABLE 0x83
#define ACPI_EC_COMMAND_QUERY 0x84
-#define EC_POLLING 0xFF
-#define EC_BURST 0x00
+#define EC_POLL 0xFF
+#define EC_INTR 0x00
static int acpi_ec_remove(struct acpi_device *device, int type);
static int acpi_ec_start(struct acpi_device *device);
static int acpi_ec_stop(struct acpi_device *device, int type);
-static int acpi_ec_burst_add(struct acpi_device *device);
-static int acpi_ec_polling_add(struct acpi_device *device);
+static int acpi_ec_intr_add(struct acpi_device *device);
+static int acpi_ec_poll_add(struct acpi_device *device);
static struct acpi_driver acpi_ec_driver = {
.name = ACPI_EC_DRIVER_NAME,
.class = ACPI_EC_CLASS,
.ids = ACPI_EC_HID,
.ops = {
- .add = acpi_ec_polling_add,
+ .add = acpi_ec_intr_add,
.remove = acpi_ec_remove,
.start = acpi_ec_start,
.stop = acpi_ec_stop,
@@ -105,7 +105,7 @@
atomic_t pending_gpe;
struct semaphore sem;
wait_queue_head_t wait;
- } burst;
+ } intr;
struct {
u32 mode;
@@ -117,37 +117,37 @@
struct acpi_generic_address data_addr;
unsigned long global_lock;
spinlock_t lock;
- } polling;
+ } poll;
};
-static int acpi_ec_polling_wait(union acpi_ec *ec, u8 event);
-static int acpi_ec_burst_wait(union acpi_ec *ec, unsigned int event);
-static int acpi_ec_polling_read(union acpi_ec *ec, u8 address, u32 * data);
-static int acpi_ec_burst_read(union acpi_ec *ec, u8 address, u32 * data);
-static int acpi_ec_polling_write(union acpi_ec *ec, u8 address, u8 data);
-static int acpi_ec_burst_write(union acpi_ec *ec, u8 address, u8 data);
-static int acpi_ec_polling_query(union acpi_ec *ec, u32 * data);
-static int acpi_ec_burst_query(union acpi_ec *ec, u32 * data);
-static void acpi_ec_gpe_polling_query(void *ec_cxt);
-static void acpi_ec_gpe_burst_query(void *ec_cxt);
-static u32 acpi_ec_gpe_polling_handler(void *data);
-static u32 acpi_ec_gpe_burst_handler(void *data);
+static int acpi_ec_poll_wait(union acpi_ec *ec, u8 event);
+static int acpi_ec_intr_wait(union acpi_ec *ec, unsigned int event);
+static int acpi_ec_poll_read(union acpi_ec *ec, u8 address, u32 * data);
+static int acpi_ec_intr_read(union acpi_ec *ec, u8 address, u32 * data);
+static int acpi_ec_poll_write(union acpi_ec *ec, u8 address, u8 data);
+static int acpi_ec_intr_write(union acpi_ec *ec, u8 address, u8 data);
+static int acpi_ec_poll_query(union acpi_ec *ec, u32 * data);
+static int acpi_ec_intr_query(union acpi_ec *ec, u32 * data);
+static void acpi_ec_gpe_poll_query(void *ec_cxt);
+static void acpi_ec_gpe_intr_query(void *ec_cxt);
+static u32 acpi_ec_gpe_poll_handler(void *data);
+static u32 acpi_ec_gpe_intr_handler(void *data);
static acpi_status __init
-acpi_fake_ecdt_polling_callback(acpi_handle handle,
+acpi_fake_ecdt_poll_callback(acpi_handle handle,
u32 Level, void *context, void **retval);
static acpi_status __init
-acpi_fake_ecdt_burst_callback(acpi_handle handle,
+acpi_fake_ecdt_intr_callback(acpi_handle handle,
u32 Level, void *context, void **retval);
-static int __init acpi_ec_polling_get_real_ecdt(void);
-static int __init acpi_ec_burst_get_real_ecdt(void);
+static int __init acpi_ec_poll_get_real_ecdt(void);
+static int __init acpi_ec_intr_get_real_ecdt(void);
/* If we find an EC via the ECDT, we need to keep a ptr to its context */
static union acpi_ec *ec_ecdt;
/* External interfaces use first EC only, so remember */
static struct acpi_device *first_ec;
-static int acpi_ec_polling_mode = EC_POLLING;
+static int acpi_ec_poll_mode = EC_INTR;
/* --------------------------------------------------------------------------
Transaction Management
@@ -163,13 +163,13 @@
static int acpi_ec_wait(union acpi_ec *ec, u8 event)
{
- if (acpi_ec_polling_mode)
- return acpi_ec_polling_wait(ec, event);
+ if (acpi_ec_poll_mode)
+ return acpi_ec_poll_wait(ec, event);
else
- return acpi_ec_burst_wait(ec, event);
+ return acpi_ec_intr_wait(ec, event);
}
-static int acpi_ec_polling_wait(union acpi_ec *ec, u8 event)
+static int acpi_ec_poll_wait(union acpi_ec *ec, u8 event)
{
u32 acpi_ec_status = 0;
u32 i = ACPI_EC_UDELAY_COUNT;
@@ -203,36 +203,31 @@
return -ETIME;
}
-static int acpi_ec_burst_wait(union acpi_ec *ec, unsigned int event)
+static int acpi_ec_intr_wait(union acpi_ec *ec, unsigned int event)
{
int result = 0;
ACPI_FUNCTION_TRACE("acpi_ec_wait");
- ec->burst.expect_event = event;
+ ec->intr.expect_event = event;
smp_mb();
switch (event) {
- case ACPI_EC_EVENT_OBF:
- if (acpi_ec_read_status(ec) & event) {
- ec->burst.expect_event = 0;
+ case ACPI_EC_EVENT_IBE:
+ if (~acpi_ec_read_status(ec) & event) {
+ ec->intr.expect_event = 0;
return_VALUE(0);
}
break;
-
- case ACPI_EC_EVENT_IBE:
- if (~acpi_ec_read_status(ec) & event) {
- ec->burst.expect_event = 0;
- return_VALUE(0);
- }
+ default:
break;
}
- result = wait_event_timeout(ec->burst.wait,
- !ec->burst.expect_event,
+ result = wait_event_timeout(ec->intr.wait,
+ !ec->intr.expect_event,
msecs_to_jiffies(ACPI_EC_DELAY));
- ec->burst.expect_event = 0;
+ ec->intr.expect_event = 0;
smp_mb();
/*
@@ -255,7 +250,12 @@
return_VALUE(-ETIME);
}
-static int acpi_ec_enter_burst_mode(union acpi_ec *ec)
+#ifdef ACPI_FUTURE_USAGE
+/*
+ * Note: samsung nv5000 doesn't work with ec burst mode.
+ * http://bugzilla.kernel.org/show_bug.cgi?id=4980
+ */
+int acpi_ec_enter_burst_mode(union acpi_ec *ec)
{
u32 tmp = 0;
int status = 0;
@@ -270,45 +270,56 @@
acpi_hw_low_level_write(8, ACPI_EC_BURST_ENABLE,
&ec->common.command_addr);
status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
- if (status)
- return_VALUE(-EINVAL);
acpi_hw_low_level_read(8, &tmp, &ec->common.data_addr);
if (tmp != 0x90) { /* Burst ACK byte */
return_VALUE(-EINVAL);
}
}
- atomic_set(&ec->burst.leaving_burst, 0);
+ atomic_set(&ec->intr.leaving_burst, 0);
return_VALUE(0);
end:
- printk("Error in acpi_ec_wait\n");
+ printk(KERN_WARNING PREFIX "Error in acpi_ec_wait\n");
return_VALUE(-1);
}
-static int acpi_ec_leave_burst_mode(union acpi_ec *ec)
+int acpi_ec_leave_burst_mode(union acpi_ec *ec)
{
+ int status = 0;
ACPI_FUNCTION_TRACE("acpi_ec_leave_burst_mode");
- atomic_set(&ec->burst.leaving_burst, 1);
+ status = acpi_ec_read_status(ec);
+ if (status != -EINVAL && (status & ACPI_EC_FLAG_BURST)){
+ status = acpi_ec_wait(ec, ACPI_EC_FLAG_IBF);
+ if(status)
+ goto end;
+ acpi_hw_low_level_write(8, ACPI_EC_BURST_DISABLE, &ec->common.command_addr);
+ acpi_ec_wait(ec, ACPI_EC_FLAG_IBF);
+ }
+ atomic_set(&ec->intr.leaving_burst, 1);
return_VALUE(0);
+end:
+ printk(KERN_WARNING PREFIX "leave burst_mode:error\n");
+ return_VALUE(-1);
}
+#endif /* ACPI_FUTURE_USAGE */
static int acpi_ec_read(union acpi_ec *ec, u8 address, u32 * data)
{
- if (acpi_ec_polling_mode)
- return acpi_ec_polling_read(ec, address, data);
+ if (acpi_ec_poll_mode)
+ return acpi_ec_poll_read(ec, address, data);
else
- return acpi_ec_burst_read(ec, address, data);
+ return acpi_ec_intr_read(ec, address, data);
}
static int acpi_ec_write(union acpi_ec *ec, u8 address, u8 data)
{
- if (acpi_ec_polling_mode)
- return acpi_ec_polling_write(ec, address, data);
+ if (acpi_ec_poll_mode)
+ return acpi_ec_poll_write(ec, address, data);
else
- return acpi_ec_burst_write(ec, address, data);
+ return acpi_ec_intr_write(ec, address, data);
}
-static int acpi_ec_polling_read(union acpi_ec *ec, u8 address, u32 * data)
+static int acpi_ec_poll_read(union acpi_ec *ec, u8 address, u32 * data)
{
acpi_status status = AE_OK;
int result = 0;
@@ -328,7 +339,7 @@
return_VALUE(-ENODEV);
}
- spin_lock_irqsave(&ec->polling.lock, flags);
+ spin_lock_irqsave(&ec->poll.lock, flags);
acpi_hw_low_level_write(8, ACPI_EC_COMMAND_READ,
&ec->common.command_addr);
@@ -347,7 +358,7 @@
*data, address));
end:
- spin_unlock_irqrestore(&ec->polling.lock, flags);
+ spin_unlock_irqrestore(&ec->poll.lock, flags);
if (ec->common.global_lock)
acpi_release_global_lock(glk);
@@ -355,7 +366,7 @@
return_VALUE(result);
}
-static int acpi_ec_polling_write(union acpi_ec *ec, u8 address, u8 data)
+static int acpi_ec_poll_write(union acpi_ec *ec, u8 address, u8 data)
{
int result = 0;
acpi_status status = AE_OK;
@@ -373,7 +384,7 @@
return_VALUE(-ENODEV);
}
- spin_lock_irqsave(&ec->polling.lock, flags);
+ spin_lock_irqsave(&ec->poll.lock, flags);
acpi_hw_low_level_write(8, ACPI_EC_COMMAND_WRITE,
&ec->common.command_addr);
@@ -395,7 +406,7 @@
data, address));
end:
- spin_unlock_irqrestore(&ec->polling.lock, flags);
+ spin_unlock_irqrestore(&ec->poll.lock, flags);
if (ec->common.global_lock)
acpi_release_global_lock(glk);
@@ -403,7 +414,7 @@
return_VALUE(result);
}
-static int acpi_ec_burst_read(union acpi_ec *ec, u8 address, u32 * data)
+static int acpi_ec_intr_read(union acpi_ec *ec, u8 address, u32 * data)
{
int status = 0;
u32 glk;
@@ -422,25 +433,24 @@
}
WARN_ON(in_interrupt());
- down(&ec->burst.sem);
+ down(&ec->intr.sem);
- acpi_ec_enter_burst_mode(ec);
status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
if (status) {
- printk("read EC, IB not empty\n");
+ printk(KERN_DEBUG PREFIX "read EC, IB not empty\n");
goto end;
}
acpi_hw_low_level_write(8, ACPI_EC_COMMAND_READ,
&ec->common.command_addr);
status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
if (status) {
- printk("read EC, IB not empty\n");
+ printk(KERN_DEBUG PREFIX "read EC, IB not empty\n");
}
acpi_hw_low_level_write(8, address, &ec->common.data_addr);
status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
if (status) {
- printk("read EC, OB not full\n");
+ printk(KERN_DEBUG PREFIX "read EC, OB not full\n");
goto end;
}
acpi_hw_low_level_read(8, data, &ec->common.data_addr);
@@ -448,8 +458,7 @@
*data, address));
end:
- acpi_ec_leave_burst_mode(ec);
- up(&ec->burst.sem);
+ up(&ec->intr.sem);
if (ec->common.global_lock)
acpi_release_global_lock(glk);
@@ -457,7 +466,7 @@
return_VALUE(status);
}
-static int acpi_ec_burst_write(union acpi_ec *ec, u8 address, u8 data)
+static int acpi_ec_intr_write(union acpi_ec *ec, u8 address, u8 data)
{
int status = 0;
u32 glk;
@@ -474,25 +483,23 @@
}
WARN_ON(in_interrupt());
- down(&ec->burst.sem);
-
- acpi_ec_enter_burst_mode(ec);
+ down(&ec->intr.sem);
status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
if (status) {
- printk("write EC, IB not empty\n");
+ printk(KERN_DEBUG PREFIX "write EC, IB not empty\n");
}
acpi_hw_low_level_write(8, ACPI_EC_COMMAND_WRITE,
&ec->common.command_addr);
status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
if (status) {
- printk("write EC, IB not empty\n");
+ printk(KERN_DEBUG PREFIX "write EC, IB not empty\n");
}
acpi_hw_low_level_write(8, address, &ec->common.data_addr);
status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
if (status) {
- printk("write EC, IB not empty\n");
+ printk(KERN_DEBUG PREFIX "write EC, IB not empty\n");
}
acpi_hw_low_level_write(8, data, &ec->common.data_addr);
@@ -500,8 +507,7 @@
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Wrote [%02x] to address [%02x]\n",
data, address));
- acpi_ec_leave_burst_mode(ec);
- up(&ec->burst.sem);
+ up(&ec->intr.sem);
if (ec->common.global_lock)
acpi_release_global_lock(glk);
@@ -553,12 +559,12 @@
static int acpi_ec_query(union acpi_ec *ec, u32 * data)
{
- if (acpi_ec_polling_mode)
- return acpi_ec_polling_query(ec, data);
+ if (acpi_ec_poll_mode)
+ return acpi_ec_poll_query(ec, data);
else
- return acpi_ec_burst_query(ec, data);
+ return acpi_ec_intr_query(ec, data);
}
-static int acpi_ec_polling_query(union acpi_ec *ec, u32 * data)
+static int acpi_ec_poll_query(union acpi_ec *ec, u32 * data)
{
int result = 0;
acpi_status status = AE_OK;
@@ -583,7 +589,7 @@
* Note that successful completion of the query causes the ACPI_EC_SCI
* bit to be cleared (and thus clearing the interrupt source).
*/
- spin_lock_irqsave(&ec->polling.lock, flags);
+ spin_lock_irqsave(&ec->poll.lock, flags);
acpi_hw_low_level_write(8, ACPI_EC_COMMAND_QUERY,
&ec->common.command_addr);
@@ -596,14 +602,14 @@
result = -ENODATA;
end:
- spin_unlock_irqrestore(&ec->polling.lock, flags);
+ spin_unlock_irqrestore(&ec->poll.lock, flags);
if (ec->common.global_lock)
acpi_release_global_lock(glk);
return_VALUE(result);
}
-static int acpi_ec_burst_query(union acpi_ec *ec, u32 * data)
+static int acpi_ec_intr_query(union acpi_ec *ec, u32 * data)
{
int status = 0;
u32 glk;
@@ -620,11 +626,11 @@
return_VALUE(-ENODEV);
}
- down(&ec->burst.sem);
+ down(&ec->intr.sem);
status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
if (status) {
- printk("query EC, IB not empty\n");
+ printk(KERN_DEBUG PREFIX "query EC, IB not empty\n");
goto end;
}
/*
@@ -636,7 +642,7 @@
&ec->common.command_addr);
status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
if (status) {
- printk("query EC, OB not full\n");
+ printk(KERN_DEBUG PREFIX "query EC, OB not full\n");
goto end;
}
@@ -645,7 +651,7 @@
status = -ENODATA;
end:
- up(&ec->burst.sem);
+ up(&ec->intr.sem);
if (ec->common.global_lock)
acpi_release_global_lock(glk);
@@ -664,13 +670,13 @@
static void acpi_ec_gpe_query(void *ec_cxt)
{
- if (acpi_ec_polling_mode)
- acpi_ec_gpe_polling_query(ec_cxt);
+ if (acpi_ec_poll_mode)
+ acpi_ec_gpe_poll_query(ec_cxt);
else
- acpi_ec_gpe_burst_query(ec_cxt);
+ acpi_ec_gpe_intr_query(ec_cxt);
}
-static void acpi_ec_gpe_polling_query(void *ec_cxt)
+static void acpi_ec_gpe_poll_query(void *ec_cxt)
{
union acpi_ec *ec = (union acpi_ec *)ec_cxt;
u32 value = 0;
@@ -685,9 +691,9 @@
if (!ec_cxt)
goto end;
- spin_lock_irqsave(&ec->polling.lock, flags);
+ spin_lock_irqsave(&ec->poll.lock, flags);
acpi_hw_low_level_read(8, &value, &ec->common.command_addr);
- spin_unlock_irqrestore(&ec->polling.lock, flags);
+ spin_unlock_irqrestore(&ec->poll.lock, flags);
/* TBD: Implement asynch events!
* NOTE: All we care about are EC-SCI's. Other EC events are
@@ -711,7 +717,7 @@
end:
acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
}
-static void acpi_ec_gpe_burst_query(void *ec_cxt)
+static void acpi_ec_gpe_intr_query(void *ec_cxt)
{
union acpi_ec *ec = (union acpi_ec *)ec_cxt;
u32 value;
@@ -736,18 +742,18 @@
acpi_evaluate_object(ec->common.handle, object_name, NULL, NULL);
end:
- atomic_dec(&ec->burst.pending_gpe);
+ atomic_dec(&ec->intr.pending_gpe);
return;
}
static u32 acpi_ec_gpe_handler(void *data)
{
- if (acpi_ec_polling_mode)
- return acpi_ec_gpe_polling_handler(data);
+ if (acpi_ec_poll_mode)
+ return acpi_ec_gpe_poll_handler(data);
else
- return acpi_ec_gpe_burst_handler(data);
+ return acpi_ec_gpe_intr_handler(data);
}
-static u32 acpi_ec_gpe_polling_handler(void *data)
+static u32 acpi_ec_gpe_poll_handler(void *data)
{
acpi_status status = AE_OK;
union acpi_ec *ec = (union acpi_ec *)data;
@@ -765,7 +771,7 @@
else
return ACPI_INTERRUPT_NOT_HANDLED;
}
-static u32 acpi_ec_gpe_burst_handler(void *data)
+static u32 acpi_ec_gpe_intr_handler(void *data)
{
acpi_status status = AE_OK;
u32 value;
@@ -777,22 +783,22 @@
acpi_clear_gpe(NULL, ec->common.gpe_bit, ACPI_ISR);
value = acpi_ec_read_status(ec);
- switch (ec->burst.expect_event) {
+ switch (ec->intr.expect_event) {
case ACPI_EC_EVENT_OBF:
if (!(value & ACPI_EC_FLAG_OBF))
break;
case ACPI_EC_EVENT_IBE:
if ((value & ACPI_EC_FLAG_IBF))
break;
- ec->burst.expect_event = 0;
- wake_up(&ec->burst.wait);
+ ec->intr.expect_event = 0;
+ wake_up(&ec->intr.wait);
return ACPI_INTERRUPT_HANDLED;
default:
break;
}
if (value & ACPI_EC_FLAG_SCI) {
- atomic_add(1, &ec->burst.pending_gpe);
+ atomic_add(1, &ec->intr.pending_gpe);
status = acpi_os_queue_for_execution(OSD_PRIORITY_GPE,
acpi_ec_gpe_query, ec);
return status == AE_OK ?
@@ -980,7 +986,7 @@
Driver Interface
-------------------------------------------------------------------------- */
-static int acpi_ec_polling_add(struct acpi_device *device)
+static int acpi_ec_poll_add(struct acpi_device *device)
{
int result = 0;
acpi_status status = AE_OK;
@@ -999,7 +1005,7 @@
ec->common.handle = device->handle;
ec->common.uid = -1;
- spin_lock_init(&ec->polling.lock);
+ spin_lock_init(&ec->poll.lock);
strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_EC_CLASS);
acpi_driver_data(device) = ec;
@@ -1038,7 +1044,7 @@
if (result)
goto end;
- printk(KERN_INFO PREFIX "%s [%s] (gpe %d)\n",
+ printk(KERN_INFO PREFIX "%s [%s] (gpe %d) polling mode.\n",
acpi_device_name(device), acpi_device_bid(device),
(u32) ec->common.gpe_bit);
@@ -1051,7 +1057,7 @@
return_VALUE(result);
}
-static int acpi_ec_burst_add(struct acpi_device *device)
+static int acpi_ec_intr_add(struct acpi_device *device)
{
int result = 0;
acpi_status status = AE_OK;
@@ -1070,10 +1076,10 @@
ec->common.handle = device->handle;
ec->common.uid = -1;
- atomic_set(&ec->burst.pending_gpe, 0);
- atomic_set(&ec->burst.leaving_burst, 1);
- init_MUTEX(&ec->burst.sem);
- init_waitqueue_head(&ec->burst.wait);
+ atomic_set(&ec->intr.pending_gpe, 0);
+ atomic_set(&ec->intr.leaving_burst, 1);
+ init_MUTEX(&ec->intr.sem);
+ init_waitqueue_head(&ec->intr.wait);
strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_EC_CLASS);
acpi_driver_data(device) = ec;
@@ -1112,8 +1118,7 @@
if (result)
goto end;
- printk("burst-mode-ec-10-Aug\n");
- printk(KERN_INFO PREFIX "%s [%s] (gpe %d)\n",
+ printk(KERN_INFO PREFIX "%s [%s] (gpe %d) interrupt mode.\n",
acpi_device_name(device), acpi_device_bid(device),
(u32) ec->common.gpe_bit);
@@ -1151,7 +1156,7 @@
union acpi_ec *ec = (union acpi_ec *)context;
struct acpi_generic_address *addr;
- if (resource->id != ACPI_RSTYPE_IO) {
+ if (resource->type != ACPI_RESOURCE_TYPE_IO) {
return AE_OK;
}
@@ -1171,7 +1176,7 @@
addr->address_space_id = ACPI_ADR_SPACE_SYSTEM_IO;
addr->register_bit_width = 8;
addr->register_bit_offset = 0;
- addr->address = resource->data.io.min_base_address;
+ addr->address = resource->data.io.minimum;
return AE_OK;
}
@@ -1267,16 +1272,16 @@
u32 Level, void *context, void **retval)
{
- if (acpi_ec_polling_mode)
- return acpi_fake_ecdt_polling_callback(handle,
+ if (acpi_ec_poll_mode)
+ return acpi_fake_ecdt_poll_callback(handle,
Level, context, retval);
else
- return acpi_fake_ecdt_burst_callback(handle,
+ return acpi_fake_ecdt_intr_callback(handle,
Level, context, retval);
}
static acpi_status __init
-acpi_fake_ecdt_polling_callback(acpi_handle handle,
+acpi_fake_ecdt_poll_callback(acpi_handle handle,
u32 Level, void *context, void **retval)
{
acpi_status status;
@@ -1295,7 +1300,7 @@
&ec_ecdt->common.gpe_bit);
if (ACPI_FAILURE(status))
return status;
- spin_lock_init(&ec_ecdt->polling.lock);
+ spin_lock_init(&ec_ecdt->poll.lock);
ec_ecdt->common.global_lock = TRUE;
ec_ecdt->common.handle = handle;
@@ -1308,13 +1313,13 @@
}
static acpi_status __init
-acpi_fake_ecdt_burst_callback(acpi_handle handle,
+acpi_fake_ecdt_intr_callback(acpi_handle handle,
u32 Level, void *context, void **retval)
{
acpi_status status;
- init_MUTEX(&ec_ecdt->burst.sem);
- init_waitqueue_head(&ec_ecdt->burst.wait);
+ init_MUTEX(&ec_ecdt->intr.sem);
+ init_waitqueue_head(&ec_ecdt->intr.wait);
status = acpi_walk_resources(handle, METHOD_NAME__CRS,
acpi_ec_io_ports, ec_ecdt);
if (ACPI_FAILURE(status))
@@ -1380,13 +1385,13 @@
static int __init acpi_ec_get_real_ecdt(void)
{
- if (acpi_ec_polling_mode)
- return acpi_ec_polling_get_real_ecdt();
+ if (acpi_ec_poll_mode)
+ return acpi_ec_poll_get_real_ecdt();
else
- return acpi_ec_burst_get_real_ecdt();
+ return acpi_ec_intr_get_real_ecdt();
}
-static int __init acpi_ec_polling_get_real_ecdt(void)
+static int __init acpi_ec_poll_get_real_ecdt(void)
{
acpi_status status;
struct acpi_table_ecdt *ecdt_ptr;
@@ -1411,7 +1416,7 @@
ec_ecdt->common.status_addr = ecdt_ptr->ec_control;
ec_ecdt->common.data_addr = ecdt_ptr->ec_data;
ec_ecdt->common.gpe_bit = ecdt_ptr->gpe_bit;
- spin_lock_init(&ec_ecdt->polling.lock);
+ spin_lock_init(&ec_ecdt->poll.lock);
/* use the GL just to be safe */
ec_ecdt->common.global_lock = TRUE;
ec_ecdt->common.uid = ecdt_ptr->uid;
@@ -1431,7 +1436,7 @@
return -ENODEV;
}
-static int __init acpi_ec_burst_get_real_ecdt(void)
+static int __init acpi_ec_intr_get_real_ecdt(void)
{
acpi_status status;
struct acpi_table_ecdt *ecdt_ptr;
@@ -1452,8 +1457,8 @@
return -ENOMEM;
memset(ec_ecdt, 0, sizeof(union acpi_ec));
- init_MUTEX(&ec_ecdt->burst.sem);
- init_waitqueue_head(&ec_ecdt->burst.wait);
+ init_MUTEX(&ec_ecdt->intr.sem);
+ init_waitqueue_head(&ec_ecdt->intr.wait);
ec_ecdt->common.command_addr = ecdt_ptr->ec_control;
ec_ecdt->common.status_addr = ecdt_ptr->ec_control;
ec_ecdt->common.data_addr = ecdt_ptr->ec_data;
@@ -1571,22 +1576,22 @@
}
__setup("acpi_fake_ecdt", acpi_fake_ecdt_setup);
-static int __init acpi_ec_set_polling_mode(char *str)
+static int __init acpi_ec_set_intr_mode(char *str)
{
- int burst;
+ int intr;
- if (!get_option(&str, &burst))
+ if (!get_option(&str, &intr))
return 0;
- if (burst) {
- acpi_ec_polling_mode = EC_BURST;
- acpi_ec_driver.ops.add = acpi_ec_burst_add;
+ if (intr) {
+ acpi_ec_poll_mode = EC_INTR;
+ acpi_ec_driver.ops.add = acpi_ec_intr_add;
} else {
- acpi_ec_polling_mode = EC_POLLING;
- acpi_ec_driver.ops.add = acpi_ec_polling_add;
+ acpi_ec_poll_mode = EC_POLL;
+ acpi_ec_driver.ops.add = acpi_ec_poll_add;
}
- printk(KERN_INFO PREFIX "EC %s mode.\n", burst ? "burst" : "polling");
+ printk(KERN_INFO PREFIX "EC %s mode.\n", intr ? "interrupt" : "polling");
return 0;
}
-__setup("ec_burst=", acpi_ec_set_polling_mode);
+__setup("ec_intr=", acpi_ec_set_intr_mode);
diff --git a/drivers/acpi/events/evevent.c b/drivers/acpi/events/evevent.c
index 842d1e3..c9ac05c 100644
--- a/drivers/acpi/events/evevent.c
+++ b/drivers/acpi/events/evevent.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -73,7 +73,7 @@
/* Make sure we have ACPI tables */
if (!acpi_gbl_DSDT) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "No ACPI tables present!\n"));
+ ACPI_WARNING((AE_INFO, "No ACPI tables present!"));
return_ACPI_STATUS(AE_NO_ACPI_TABLES);
}
@@ -84,14 +84,15 @@
*/
status = acpi_ev_fixed_event_initialize();
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Unable to initialize fixed events, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to initialize fixed events"));
return_ACPI_STATUS(status);
}
status = acpi_ev_gpe_initialize();
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Unable to initialize general purpose events, %s\n", acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to initialize general purpose events"));
return_ACPI_STATUS(status);
}
@@ -100,6 +101,48 @@
/*******************************************************************************
*
+ * FUNCTION: acpi_ev_install_fadt_gpes
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Completes initialization of the FADT-defined GPE blocks
+ * (0 and 1). This causes the _PRW methods to be run, so the HW
+ * must be fully initialized at this point, including global lock
+ * support.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ev_install_fadt_gpes(void)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE("ev_install_fadt_gpes");
+
+ /* Namespace must be locked */
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* FADT GPE Block 0 */
+
+ (void)acpi_ev_initialize_gpe_block(acpi_gbl_fadt_gpe_device,
+ acpi_gbl_gpe_fadt_blocks[0]);
+
+ /* FADT GPE Block 1 */
+
+ (void)acpi_ev_initialize_gpe_block(acpi_gbl_fadt_gpe_device,
+ acpi_gbl_gpe_fadt_blocks[1]);
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_ev_install_xrupt_handlers
*
* PARAMETERS: None
@@ -120,7 +163,8 @@
status = acpi_ev_install_sci_handler();
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Unable to install System Control Interrupt Handler, %s\n", acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to install System Control Interrupt handler"));
return_ACPI_STATUS(status);
}
@@ -128,7 +172,8 @@
status = acpi_ev_init_global_lock_handler();
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Unable to initialize Global Lock handler, %s\n", acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to initialize Global Lock handler"));
return_ACPI_STATUS(status);
}
@@ -262,7 +307,9 @@
enable_register_id, 0,
ACPI_MTX_DO_NOT_LOCK);
- ACPI_REPORT_ERROR(("No installed handler for fixed event [%08X]\n", event));
+ ACPI_ERROR((AE_INFO,
+ "No installed handler for fixed event [%08X]",
+ event));
return (ACPI_INTERRUPT_NOT_HANDLED);
}
diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c
index b2f232d..f64f977 100644
--- a/drivers/acpi/events/evgpe.c
+++ b/drivers/acpi/events/evgpe.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -372,14 +372,14 @@
u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
{
- u32 int_status = ACPI_INTERRUPT_NOT_HANDLED;
- u8 enabled_status_byte;
- struct acpi_gpe_register_info *gpe_register_info;
- u32 status_reg;
- u32 enable_reg;
- u32 flags;
acpi_status status;
struct acpi_gpe_block_info *gpe_block;
+ struct acpi_gpe_register_info *gpe_register_info;
+ u32 int_status = ACPI_INTERRUPT_NOT_HANDLED;
+ u8 enabled_status_byte;
+ u32 status_reg;
+ u32 enable_reg;
+ acpi_cpu_flags flags;
acpi_native_uint i;
acpi_native_uint j;
@@ -546,7 +546,11 @@
status = acpi_ns_evaluate_by_handle(&info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("%s while evaluating method [%4.4s] for GPE[%2X]\n", acpi_format_exception(status), acpi_ut_get_node_name(local_gpe_event_info.dispatch.method_node), gpe_number));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "While evaluating method [%4.4s] for GPE[%2X]",
+ acpi_ut_get_node_name
+ (local_gpe_event_info.dispatch.
+ method_node), gpe_number));
}
}
@@ -599,8 +603,10 @@
ACPI_GPE_EDGE_TRIGGERED) {
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to clear GPE[%2X]\n", acpi_format_exception(status), gpe_number));
- return_VALUE(ACPI_INTERRUPT_NOT_HANDLED);
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to clear GPE[%2X]",
+ gpe_number));
+ return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
}
@@ -637,8 +643,10 @@
ACPI_GPE_LEVEL_TRIGGERED) {
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to clear GPE[%2X]\n", acpi_format_exception(status), gpe_number));
- return_VALUE(ACPI_INTERRUPT_NOT_HANDLED);
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to clear GPE[%2X]",
+ gpe_number));
+ return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
}
break;
@@ -651,8 +659,10 @@
*/
status = acpi_ev_disable_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to disable GPE[%2X]\n", acpi_format_exception(status), gpe_number));
- return_VALUE(ACPI_INTERRUPT_NOT_HANDLED);
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to disable GPE[%2X]",
+ gpe_number));
+ return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
/*
@@ -663,7 +673,9 @@
acpi_ev_asynch_execute_gpe_method,
gpe_event_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to queue handler for GPE[%2X] - event disabled\n", acpi_format_exception(status), gpe_number));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to queue handler for GPE[%2X] - event disabled",
+ gpe_number));
}
break;
@@ -671,7 +683,9 @@
/* No handler or method to run! */
- ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: No handler or method for GPE[%2X], disabling event\n", gpe_number));
+ ACPI_ERROR((AE_INFO,
+ "No handler or method for GPE[%2X], disabling event",
+ gpe_number));
/*
* Disable the GPE. The GPE will remain disabled until the ACPI
@@ -679,13 +693,15 @@
*/
status = acpi_ev_disable_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to disable GPE[%2X]\n", acpi_format_exception(status), gpe_number));
- return_VALUE(ACPI_INTERRUPT_NOT_HANDLED);
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to disable GPE[%2X]",
+ gpe_number));
+ return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
break;
}
- return_VALUE(ACPI_INTERRUPT_HANDLED);
+ return_UINT32(ACPI_INTERRUPT_HANDLED);
}
#ifdef ACPI_GPE_NOTIFY_CHECK
@@ -722,7 +738,9 @@
acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
- ACPI_REPORT_INFO(("GPE %p was updated from wake/run to wake-only\n", gpe_event_info));
+ ACPI_INFO((AE_INFO,
+ "GPE %p was updated from wake/run to wake-only",
+ gpe_event_info));
/* This was a wake-only GPE */
diff --git a/drivers/acpi/events/evgpeblk.c b/drivers/acpi/events/evgpeblk.c
index b312eb3..0fd00b5 100644
--- a/drivers/acpi/events/evgpeblk.c
+++ b/drivers/acpi/events/evgpeblk.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -78,7 +78,7 @@
*
* RETURN: TRUE if the gpe_event is valid
*
- * DESCRIPTION: Validate a GPE event. DO NOT CALL FROM INTERRUPT LEVEL.
+ * DESCRIPTION: Validate a GPE event. DO NOT CALL FROM INTERRUPT LEVEL.
* Should be called only when the GPE lists are semaphore locked
* and not subject to change.
*
@@ -136,7 +136,7 @@
struct acpi_gpe_block_info *gpe_block;
struct acpi_gpe_xrupt_info *gpe_xrupt_info;
acpi_status status = AE_OK;
- u32 flags;
+ acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE("ev_walk_gpe_list");
@@ -264,7 +264,7 @@
* 2) Edge/Level determination is based on the 2nd character
* of the method name
*
- * NOTE: Default GPE type is RUNTIME. May be changed later to WAKE
+ * NOTE: Default GPE type is RUNTIME. May be changed later to WAKE
* if a _PRW object is found that points to this GPE.
*/
switch (name[1]) {
@@ -279,9 +279,9 @@
default:
/* Unknown method type, just ignore it! */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unknown GPE method type: %s (name not of form _Lxx or _Exx)\n",
- name));
+ ACPI_ERROR((AE_INFO,
+ "Unknown GPE method type: %s (name not of form _Lxx or _Exx)",
+ name));
return_ACPI_STATUS(AE_OK);
}
@@ -291,9 +291,9 @@
if (gpe_number == ACPI_UINT32_MAX) {
/* Conversion failed; invalid method, just ignore it */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not extract GPE number from name: %s (name is not of form _Lxx or _Exx)\n",
- name));
+ ACPI_ERROR((AE_INFO,
+ "Could not extract GPE number from name: %s (name is not of form _Lxx or _Exx)",
+ name));
return_ACPI_STATUS(AE_OK);
}
@@ -313,14 +313,14 @@
/*
* Now we can add this information to the gpe_event_info block
- * for use during dispatch of this GPE. Default type is RUNTIME, although
+ * for use during dispatch of this GPE. Default type is RUNTIME, although
* this may change when the _PRW methods are executed later.
*/
gpe_event_info =
&gpe_block->event_info[gpe_number - gpe_block->block_base_number];
- gpe_event_info->flags = (u8) (type | ACPI_GPE_DISPATCH_METHOD |
- ACPI_GPE_TYPE_RUNTIME);
+ gpe_event_info->flags = (u8)
+ (type | ACPI_GPE_DISPATCH_METHOD | ACPI_GPE_TYPE_RUNTIME);
gpe_event_info->dispatch.method_node =
(struct acpi_namespace_node *)obj_handle;
@@ -341,11 +341,11 @@
*
* PARAMETERS: Callback from walk_namespace
*
- * RETURN: Status. NOTE: We ignore errors so that the _PRW walk is
+ * RETURN: Status. NOTE: We ignore errors so that the _PRW walk is
* not aborted on a single _PRW failure.
*
* DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
- * Device. Run the _PRW method. If present, extract the GPE
+ * Device. Run the _PRW method. If present, extract the GPE
* number and mark the GPE as a WAKE GPE.
*
******************************************************************************/
@@ -443,6 +443,7 @@
gpe_event_info->flags &=
~(ACPI_GPE_WAKE_ENABLED | ACPI_GPE_RUN_ENABLED);
+
status =
acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
if (ACPI_FAILURE(status)) {
@@ -466,7 +467,7 @@
*
* RETURN: A GPE interrupt block
*
- * DESCRIPTION: Get or Create a GPE interrupt block. There is one interrupt
+ * DESCRIPTION: Get or Create a GPE interrupt block. There is one interrupt
* block per unique interrupt level used for GPEs.
* Should be called only when the GPE lists are semaphore locked
* and not subject to change.
@@ -479,7 +480,7 @@
struct acpi_gpe_xrupt_info *next_gpe_xrupt;
struct acpi_gpe_xrupt_info *gpe_xrupt;
acpi_status status;
- u32 flags;
+ acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE("ev_get_gpe_xrupt_block");
@@ -526,9 +527,9 @@
acpi_ev_gpe_xrupt_handler,
gpe_xrupt);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not install GPE interrupt handler at level 0x%X\n",
- interrupt_number));
+ ACPI_ERROR((AE_INFO,
+ "Could not install GPE interrupt handler at level 0x%X",
+ interrupt_number));
return_PTR(NULL);
}
}
@@ -553,7 +554,7 @@
acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt)
{
acpi_status status;
- u32 flags;
+ acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE("ev_delete_gpe_xrupt");
@@ -566,8 +567,9 @@
/* Disable this interrupt */
- status = acpi_os_remove_interrupt_handler(gpe_xrupt->interrupt_number,
- acpi_ev_gpe_xrupt_handler);
+ status =
+ acpi_os_remove_interrupt_handler(gpe_xrupt->interrupt_number,
+ acpi_ev_gpe_xrupt_handler);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
@@ -610,7 +612,7 @@
struct acpi_gpe_block_info *next_gpe_block;
struct acpi_gpe_xrupt_info *gpe_xrupt_block;
acpi_status status;
- u32 flags;
+ acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE("ev_install_gpe_block");
@@ -663,7 +665,7 @@
acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block)
{
acpi_status status;
- u32 flags;
+ acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE("ev_install_gpe_block");
@@ -743,22 +745,22 @@
sizeof(struct
acpi_gpe_register_info));
if (!gpe_register_info) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not allocate the gpe_register_info table\n"));
+ ACPI_ERROR((AE_INFO,
+ "Could not allocate the gpe_register_info table"));
return_ACPI_STATUS(AE_NO_MEMORY);
}
/*
* Allocate the GPE event_info block. There are eight distinct GPEs
- * per register. Initialization to zeros is sufficient.
+ * per register. Initialization to zeros is sufficient.
*/
gpe_event_info = ACPI_MEM_CALLOCATE(((acpi_size) gpe_block->
register_count *
ACPI_GPE_REGISTER_WIDTH) *
sizeof(struct acpi_gpe_event_info));
if (!gpe_event_info) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not allocate the gpe_event_info table\n"));
+ ACPI_ERROR((AE_INFO,
+ "Could not allocate the gpe_event_info table"));
status = AE_NO_MEMORY;
goto error_exit;
}
@@ -769,9 +771,9 @@
gpe_block->event_info = gpe_event_info;
/*
- * Initialize the GPE Register and Event structures. A goal of these
+ * Initialize the GPE Register and Event structures. A goal of these
* tables is to hide the fact that there are two separate GPE register sets
- * in a given gpe hardware block, the status registers occupy the first half,
+ * in a given GPE hardware block, the status registers occupy the first half,
* and the enable registers occupy the second half.
*/
this_register = gpe_register_info;
@@ -812,11 +814,8 @@
this_event++;
}
- /*
- * Clear the status/enable registers. Note that status registers
- * are cleared by writing a '1', while enable registers are cleared
- * by writing a '0'.
- */
+ /* Disable all GPEs within this register */
+
status = acpi_hw_low_level_write(ACPI_GPE_REGISTER_WIDTH, 0x00,
&this_register->
enable_address);
@@ -824,6 +823,8 @@
goto error_exit;
}
+ /* Clear any pending GPE events within this register */
+
status = acpi_hw_low_level_write(ACPI_GPE_REGISTER_WIDTH, 0xFF,
&this_register->
status_address);
@@ -860,7 +861,9 @@
*
* RETURN: Status
*
- * DESCRIPTION: Create and Install a block of GPE registers
+ * DESCRIPTION: Create and Install a block of GPE registers. All GPEs within
+ * the block are disabled at exit.
+ * Note: Assumes namespace is locked.
*
******************************************************************************/
@@ -872,14 +875,8 @@
u32 interrupt_number,
struct acpi_gpe_block_info **return_gpe_block)
{
- struct acpi_gpe_block_info *gpe_block;
- struct acpi_gpe_event_info *gpe_event_info;
- acpi_native_uint i;
- acpi_native_uint j;
- u32 wake_gpe_count;
- u32 gpe_enabled_count;
acpi_status status;
- struct acpi_gpe_walk_info gpe_info;
+ struct acpi_gpe_block_info *gpe_block;
ACPI_FUNCTION_TRACE("ev_create_gpe_block");
@@ -896,22 +893,24 @@
/* Initialize the new GPE block */
+ gpe_block->node = gpe_device;
gpe_block->register_count = register_count;
gpe_block->block_base_number = gpe_block_base_number;
- gpe_block->node = gpe_device;
ACPI_MEMCPY(&gpe_block->block_address, gpe_block_address,
sizeof(struct acpi_generic_address));
- /* Create the register_info and event_info sub-structures */
-
+ /*
+ * Create the register_info and event_info sub-structures
+ * Note: disables and clears all GPEs in the block
+ */
status = acpi_ev_create_gpe_info_blocks(gpe_block);
if (ACPI_FAILURE(status)) {
ACPI_MEM_FREE(gpe_block);
return_ACPI_STATUS(status);
}
- /* Install the new block in the global list(s) */
+ /* Install the new block in the global lists */
status = acpi_ev_install_gpe_block(gpe_block, interrupt_number);
if (ACPI_FAILURE(status)) {
@@ -926,16 +925,70 @@
acpi_ev_save_method_info, gpe_block,
NULL);
+ /* Return the new block */
+
+ if (return_gpe_block) {
+ (*return_gpe_block) = gpe_block;
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INIT,
+ "GPE %02X to %02X [%4.4s] %u regs on int 0x%X\n",
+ (u32) gpe_block->block_base_number,
+ (u32) (gpe_block->block_base_number +
+ ((gpe_block->register_count *
+ ACPI_GPE_REGISTER_WIDTH) - 1)),
+ gpe_device->name.ascii, gpe_block->register_count,
+ interrupt_number));
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_initialize_gpe_block
+ *
+ * PARAMETERS: gpe_device - Handle to the parent GPE block
+ * gpe_block - Gpe Block info
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Initialize and enable a GPE block. First find and run any
+ * _PRT methods associated with the block, then enable the
+ * appropriate GPEs.
+ * Note: Assumes namespace is locked.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
+ struct acpi_gpe_block_info *gpe_block)
+{
+ acpi_status status;
+ struct acpi_gpe_event_info *gpe_event_info;
+ struct acpi_gpe_walk_info gpe_info;
+ u32 wake_gpe_count;
+ u32 gpe_enabled_count;
+ acpi_native_uint i;
+ acpi_native_uint j;
+
+ ACPI_FUNCTION_TRACE("ev_initialize_gpe_block");
+
+ /* Ignore a null GPE block (e.g., if no GPE block 1 exists) */
+
+ if (!gpe_block) {
+ return_ACPI_STATUS(AE_OK);
+ }
+
/*
- * Runtime option: Should Wake GPEs be enabled at runtime? The default
- * is No, they should only be enabled just as the machine goes to sleep.
+ * Runtime option: Should wake GPEs be enabled at runtime? The default
+ * is no, they should only be enabled just as the machine goes to sleep.
*/
if (acpi_gbl_leave_wake_gpes_disabled) {
/*
- * Differentiate RUNTIME vs WAKE GPEs, via the _PRW control methods.
- * (Each GPE that has one or more _PRWs that reference it is by
- * definition a WAKE GPE and will not be enabled while the machine
- * is running.)
+ * Differentiate runtime vs wake GPEs, via the _PRW control methods.
+ * Each GPE that has one or more _PRWs that reference it is by
+ * definition a wake GPE and will not be enabled while the machine
+ * is running.
*/
gpe_info.gpe_block = gpe_block;
gpe_info.gpe_device = gpe_device;
@@ -948,9 +1001,12 @@
}
/*
- * Enable all GPEs in this block that are 1) "runtime" or "run/wake" GPEs,
- * and 2) have a corresponding _Lxx or _Exx method. All other GPEs must
- * be enabled via the acpi_enable_gpe() external interface.
+ * Enable all GPEs in this block that have these attributes:
+ * 1) are "runtime" or "run/wake" GPEs, and
+ * 2) have a corresponding _Lxx or _Exx method
+ *
+ * Any other GPEs within this block must be enabled via the acpi_enable_gpe()
+ * external interface.
*/
wake_gpe_count = 0;
gpe_enabled_count = 0;
@@ -976,32 +1032,19 @@
}
}
- /* Dump info about this GPE block */
-
- ACPI_DEBUG_PRINT((ACPI_DB_INIT,
- "GPE %02X to %02X [%4.4s] %u regs on int 0x%X\n",
- (u32) gpe_block->block_base_number,
- (u32) (gpe_block->block_base_number +
- ((gpe_block->register_count *
- ACPI_GPE_REGISTER_WIDTH) - 1)),
- gpe_device->name.ascii, gpe_block->register_count,
- interrupt_number));
-
- /* Enable all valid GPEs found above */
-
- status = acpi_hw_enable_runtime_gpe_block(NULL, gpe_block);
-
ACPI_DEBUG_PRINT((ACPI_DB_INIT,
"Found %u Wake, Enabled %u Runtime GPEs in this block\n",
wake_gpe_count, gpe_enabled_count));
- /* Return the new block */
+ /* Enable all valid runtime GPEs found above */
- if (return_gpe_block) {
- (*return_gpe_block) = gpe_block;
+ status = acpi_hw_enable_runtime_gpe_block(NULL, gpe_block);
+ if (ACPI_FAILURE(status)) {
+ ACPI_ERROR((AE_INFO, "Could not enable GPEs in gpe_block %p",
+ gpe_block));
}
- return_ACPI_STATUS(AE_OK);
+ return_ACPI_STATUS(status);
}
/*******************************************************************************
@@ -1072,8 +1115,8 @@
&acpi_gbl_gpe_fadt_blocks[0]);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not create GPE Block 0, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not create GPE Block 0"));
}
}
@@ -1086,7 +1129,12 @@
if ((register_count0) &&
(gpe_number_max >= acpi_gbl_FADT->gpe1_base)) {
- ACPI_REPORT_ERROR(("GPE0 block (GPE 0 to %d) overlaps the GPE1 block (GPE %d to %d) - Ignoring GPE1\n", gpe_number_max, acpi_gbl_FADT->gpe1_base, acpi_gbl_FADT->gpe1_base + ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1)));
+ ACPI_ERROR((AE_INFO,
+ "GPE0 block (GPE 0 to %d) overlaps the GPE1 block (GPE %d to %d) - Ignoring GPE1",
+ gpe_number_max, acpi_gbl_FADT->gpe1_base,
+ acpi_gbl_FADT->gpe1_base +
+ ((register_count1 *
+ ACPI_GPE_REGISTER_WIDTH) - 1)));
/* Ignore GPE1 block by setting the register count to zero */
@@ -1104,7 +1152,8 @@
[1]);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not create GPE Block 1, %s\n", acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not create GPE Block 1"));
}
/*
@@ -1130,7 +1179,9 @@
/* Check for Max GPE number out-of-range */
if (gpe_number_max > ACPI_GPE_MAX) {
- ACPI_REPORT_ERROR(("Maximum GPE number from FADT is too large: 0x%X\n", gpe_number_max));
+ ACPI_ERROR((AE_INFO,
+ "Maximum GPE number from FADT is too large: 0x%X",
+ gpe_number_max));
status = AE_BAD_VALUE;
goto cleanup;
}
diff --git a/drivers/acpi/events/evmisc.c b/drivers/acpi/events/evmisc.c
index 7e57b84..0909ba6 100644
--- a/drivers/acpi/events/evmisc.c
+++ b/drivers/acpi/events/evmisc.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -303,7 +303,8 @@
acpi_os_signal_semaphore(acpi_gbl_global_lock_semaphore,
acpi_gbl_global_lock_thread_count);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not signal Global Lock semaphore\n"));
+ ACPI_ERROR((AE_INFO,
+ "Could not signal Global Lock semaphore"));
}
}
}
@@ -344,7 +345,8 @@
acpi_ev_global_lock_thread,
context);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not queue Global Lock thread, %s\n", acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not queue Global Lock thread"));
return (ACPI_INTERRUPT_NOT_HANDLED);
}
@@ -384,7 +386,8 @@
* with an error.
*/
if (status == AE_NO_HARDWARE_RESPONSE) {
- ACPI_REPORT_ERROR(("No response from Global Lock hardware, disabling lock\n"));
+ ACPI_ERROR((AE_INFO,
+ "No response from Global Lock hardware, disabling lock"));
acpi_gbl_global_lock_present = FALSE;
status = AE_OK;
@@ -480,7 +483,8 @@
ACPI_FUNCTION_TRACE("ev_release_global_lock");
if (!acpi_gbl_global_lock_thread_count) {
- ACPI_REPORT_WARNING(("Cannot release HW Global Lock, it has not been acquired\n"));
+ ACPI_WARNING((AE_INFO,
+ "Cannot release HW Global Lock, it has not been acquired"));
return_ACPI_STATUS(AE_NOT_ACQUIRED);
}
@@ -542,9 +546,9 @@
for (i = 0; i < ACPI_NUM_FIXED_EVENTS; i++) {
status = acpi_disable_event((u32) i, 0);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not disable fixed event %d\n",
- (u32) i));
+ ACPI_ERROR((AE_INFO,
+ "Could not disable fixed event %d",
+ (u32) i));
}
}
@@ -556,8 +560,7 @@
status = acpi_ev_remove_sci_handler();
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not remove SCI handler\n"));
+ ACPI_ERROR((AE_INFO, "Could not remove SCI handler"));
}
}
@@ -570,8 +573,7 @@
if (acpi_gbl_original_mode == ACPI_SYS_MODE_LEGACY) {
status = acpi_disable();
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "acpi_disable failed\n"));
+ ACPI_WARNING((AE_INFO, "acpi_disable failed"));
}
}
return_VOID;
diff --git a/drivers/acpi/events/evregion.c b/drivers/acpi/events/evregion.c
index 84fad08..6da58e7 100644
--- a/drivers/acpi/events/evregion.c
+++ b/drivers/acpi/events/evregion.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -295,12 +295,12 @@
handler_desc = region_obj->region.handler;
if (!handler_desc) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "No handler for Region [%4.4s] (%p) [%s]\n",
- acpi_ut_get_node_name(region_obj->region.
- node), region_obj,
- acpi_ut_get_region_name(region_obj->region.
- space_id)));
+ ACPI_ERROR((AE_INFO,
+ "No handler for Region [%4.4s] (%p) [%s]",
+ acpi_ut_get_node_name(region_obj->region.node),
+ region_obj,
+ acpi_ut_get_region_name(region_obj->region.
+ space_id)));
return_ACPI_STATUS(AE_NOT_EXIST);
}
@@ -317,12 +317,11 @@
if (!region_setup) {
/* No initialization routine, exit with error */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "No init routine for region(%p) [%s]\n",
- region_obj,
- acpi_ut_get_region_name(region_obj->
- region.
- space_id)));
+ ACPI_ERROR((AE_INFO,
+ "No init routine for region(%p) [%s]",
+ region_obj,
+ acpi_ut_get_region_name(region_obj->region.
+ space_id)));
return_ACPI_STATUS(AE_NOT_EXIST);
}
@@ -347,12 +346,11 @@
/* Check for failure of the Region Setup */
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Region Init: %s [%s]\n",
- acpi_format_exception(status),
- acpi_ut_get_region_name(region_obj->
- region.
- space_id)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "During region initialization: [%s]",
+ acpi_ut_get_region_name(region_obj->
+ region.
+ space_id)));
return_ACPI_STATUS(status);
}
@@ -406,10 +404,9 @@
region_obj2->extra.region_context);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Handler for [%s] returned %s\n",
- acpi_ut_get_region_name(region_obj->region.
- space_id),
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "Returned by Handler for [%s]",
+ acpi_ut_get_region_name(region_obj->region.
+ space_id)));
}
if (!
@@ -501,12 +498,10 @@
status = acpi_ev_execute_reg_method(region_obj, 0);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "%s from region _REG, [%s]\n",
- acpi_format_exception(status),
- acpi_ut_get_region_name
- (region_obj->region.
- space_id)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "from region _REG, [%s]",
+ acpi_ut_get_region_name
+ (region_obj->region.space_id)));
}
if (acpi_ns_is_locked) {
@@ -528,12 +523,10 @@
/* Init routine may fail, Just ignore errors */
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "%s from region init, [%s]\n",
- acpi_format_exception(status),
- acpi_ut_get_region_name
- (region_obj->region.
- space_id)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "from region init, [%s]",
+ acpi_ut_get_region_name
+ (region_obj->region.space_id)));
}
region_obj->region.flags &= ~(AOPOBJ_SETUP_COMPLETE);
diff --git a/drivers/acpi/events/evrgnini.c b/drivers/acpi/events/evrgnini.c
index a1bd2da..baed8c1 100644
--- a/drivers/acpi/events/evrgnini.c
+++ b/drivers/acpi/events/evrgnini.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -233,7 +233,11 @@
*/
status = AE_OK;
} else {
- ACPI_REPORT_ERROR(("Could not install pci_config handler for Root Bridge %4.4s, %s\n", acpi_ut_get_node_name(pci_root_node), acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO,
+ status,
+ "Could not install pci_config handler for Root Bridge %4.4s",
+ acpi_ut_get_node_name
+ (pci_root_node)));
}
}
break;
diff --git a/drivers/acpi/events/evsci.c b/drivers/acpi/events/evsci.c
index 1418359..9a62216 100644
--- a/drivers/acpi/events/evsci.c
+++ b/drivers/acpi/events/evsci.c
@@ -6,7 +6,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -88,7 +88,7 @@
*/
interrupt_handled |= acpi_ev_gpe_detect(gpe_xrupt_list);
- return_VALUE(interrupt_handled);
+ return_UINT32(interrupt_handled);
}
/*******************************************************************************
@@ -121,7 +121,7 @@
*/
interrupt_handled |= acpi_ev_gpe_detect(gpe_xrupt_list);
- return_VALUE(interrupt_handled);
+ return_UINT32(interrupt_handled);
}
/******************************************************************************
diff --git a/drivers/acpi/events/evxface.c b/drivers/acpi/events/evxface.c
index 43b33d1..b38b39d 100644
--- a/drivers/acpi/events/evxface.c
+++ b/drivers/acpi/events/evxface.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -143,8 +143,8 @@
if (ACPI_SUCCESS(status))
status = acpi_enable_event(event, 0);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Could not enable fixed event.\n"));
+ ACPI_WARNING((AE_INFO, "Could not enable fixed event %X",
+ event));
/* Remove the handler */
@@ -204,10 +204,11 @@
acpi_gbl_fixed_event_handlers[event].context = NULL;
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Could not write to fixed event enable register.\n"));
+ ACPI_WARNING((AE_INFO,
+ "Could not write to fixed event enable register %X",
+ event));
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X.\n",
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n",
event));
}
@@ -434,7 +435,7 @@
if (device == ACPI_ROOT_OBJECT) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Removing notify handler for ROOT object.\n"));
+ "Removing notify handler for namespace root object\n"));
if (((handler_type & ACPI_SYSTEM_NOTIFY) &&
!acpi_gbl_system_notify.handler) ||
@@ -562,7 +563,7 @@
struct acpi_gpe_event_info *gpe_event_info;
struct acpi_handler_info *handler;
acpi_status status;
- u32 flags;
+ acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE("acpi_install_gpe_handler");
@@ -653,7 +654,7 @@
struct acpi_gpe_event_info *gpe_event_info;
struct acpi_handler_info *handler;
acpi_status status;
- u32 flags;
+ acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE("acpi_remove_gpe_handler");
diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c
index 887ff9f..ec9ce84 100644
--- a/drivers/acpi/events/evxfevnt.c
+++ b/drivers/acpi/events/evxfevnt.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -70,8 +70,7 @@
/* Make sure we have the FADT */
if (!acpi_gbl_FADT) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "No FADT information present!\n"));
+ ACPI_WARNING((AE_INFO, "No FADT information present!"));
return_ACPI_STATUS(AE_NO_ACPI_TABLES);
}
@@ -83,7 +82,8 @@
status = acpi_hw_set_mode(ACPI_SYS_MODE_ACPI);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not transition to ACPI mode.\n"));
+ ACPI_ERROR((AE_INFO,
+ "Could not transition to ACPI mode"));
return_ACPI_STATUS(status);
}
@@ -113,8 +113,7 @@
ACPI_FUNCTION_TRACE("acpi_disable");
if (!acpi_gbl_FADT) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "No FADT information present!\n"));
+ ACPI_WARNING((AE_INFO, "No FADT information present!"));
return_ACPI_STATUS(AE_NO_ACPI_TABLES);
}
@@ -127,8 +126,8 @@
status = acpi_hw_set_mode(ACPI_SYS_MODE_LEGACY);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not exit ACPI mode to legacy mode"));
+ ACPI_ERROR((AE_INFO,
+ "Could not exit ACPI mode to legacy mode"));
return_ACPI_STATUS(status);
}
@@ -185,9 +184,9 @@
}
if (value != 1) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not enable %s event\n",
- acpi_ut_get_event_name(event)));
+ ACPI_ERROR((AE_INFO,
+ "Could not enable %s event",
+ acpi_ut_get_event_name(event)));
return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
}
@@ -384,9 +383,9 @@
}
if (value != 0) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not disable %s events\n",
- acpi_ut_get_event_name(event)));
+ ACPI_ERROR((AE_INFO,
+ "Could not disable %s events",
+ acpi_ut_get_event_name(event)));
return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
}
@@ -626,6 +625,13 @@
goto unlock_and_exit;
}
+ /* Run the _PRW methods and enable the GPEs */
+
+ status = acpi_ev_initialize_gpe_block(node, gpe_block);
+ if (ACPI_FAILURE(status)) {
+ goto unlock_and_exit;
+ }
+
/* Get the device_object attached to the node */
obj_desc = acpi_ns_get_attached_object(node);
diff --git a/drivers/acpi/events/evxfregn.c b/drivers/acpi/events/evxfregn.c
index 6f28ea2..abf5cac 100644
--- a/drivers/acpi/events/evxfregn.c
+++ b/drivers/acpi/events/evxfregn.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c
index 1ce365d..a29782f 100644
--- a/drivers/acpi/executer/exconfig.c
+++ b/drivers/acpi/executer/exconfig.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -413,9 +413,9 @@
(!ACPI_STRNCMP(table_ptr->signature,
acpi_gbl_table_data[ACPI_TABLE_SSDT].signature,
acpi_gbl_table_data[ACPI_TABLE_SSDT].sig_length))) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Table has invalid signature [%4.4s], must be SSDT or PSDT\n",
- table_ptr->signature));
+ ACPI_ERROR((AE_INFO,
+ "Table has invalid signature [%4.4s], must be SSDT or PSDT",
+ table_ptr->signature));
status = AE_BAD_SIGNATURE;
goto cleanup;
}
diff --git a/drivers/acpi/executer/exconvrt.c b/drivers/acpi/executer/exconvrt.c
index 04e5194..e6d52e1 100644
--- a/drivers/acpi/executer/exconvrt.c
+++ b/drivers/acpi/executer/exconvrt.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -504,18 +504,12 @@
}
/*
- * Perform the conversion.
+ * Create a new string object and string buffer
* (-1 because of extra separator included in string_length from above)
*/
- string_length--;
- if (string_length > ACPI_MAX_STRING_CONVERSION) { /* ACPI limit */
- return_ACPI_STATUS(AE_AML_STRING_LIMIT);
- }
-
- /* Create a new string object and string buffer */
-
return_desc =
- acpi_ut_create_string_object((acpi_size) string_length);
+ acpi_ut_create_string_object((acpi_size)
+ (string_length - 1));
if (!return_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
@@ -647,7 +641,9 @@
break;
default:
- ACPI_REPORT_ERROR(("Bad destination type during conversion: %X\n", destination_type));
+ ACPI_ERROR((AE_INFO,
+ "Bad destination type during conversion: %X",
+ destination_type));
status = AE_AML_INTERNAL;
break;
}
@@ -660,17 +656,13 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unknown Target type ID 0x%X Op %s dest_type %s\n",
- GET_CURRENT_ARG_TYPE(walk_state->op_info->
- runtime_args),
- walk_state->op_info->name,
- acpi_ut_get_type_name(destination_type)));
-
- ACPI_REPORT_ERROR(("Bad Target Type (ARGI): %X\n",
- GET_CURRENT_ARG_TYPE(walk_state->op_info->
- runtime_args)))
- status = AE_AML_INTERNAL;
+ ACPI_ERROR((AE_INFO,
+ "Unknown Target type ID 0x%X aml_opcode %X dest_type %s",
+ GET_CURRENT_ARG_TYPE(walk_state->op_info->
+ runtime_args),
+ walk_state->opcode,
+ acpi_ut_get_type_name(destination_type)));
+ status = AE_AML_INTERNAL;
}
/*
diff --git a/drivers/acpi/executer/excreate.c b/drivers/acpi/executer/excreate.c
index 91c4918..6805754 100644
--- a/drivers/acpi/executer/excreate.c
+++ b/drivers/acpi/executer/excreate.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -300,8 +300,8 @@
*/
if ((region_space >= ACPI_NUM_PREDEFINED_REGIONS) &&
(region_space < ACPI_USER_REGION_BEGIN)) {
- ACPI_REPORT_ERROR(("Invalid address_space type %X\n",
- region_space));
+ ACPI_ERROR((AE_INFO, "Invalid address_space type %X",
+ region_space));
return_ACPI_STATUS(AE_AML_INVALID_SPACE_ID);
}
diff --git a/drivers/acpi/executer/exdump.c b/drivers/acpi/executer/exdump.c
index bc2fa99..a7cca8d 100644
--- a/drivers/acpi/executer/exdump.c
+++ b/drivers/acpi/executer/exdump.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -55,20 +55,386 @@
*/
#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
/* Local prototypes */
-#ifdef ACPI_FUTURE_USAGE
static void acpi_ex_out_string(char *title, char *value);
static void acpi_ex_out_pointer(char *title, void *value);
-static void acpi_ex_out_integer(char *title, u32 value);
-
static void acpi_ex_out_address(char *title, acpi_physical_address value);
-static void acpi_ex_dump_reference(union acpi_operand_object *obj_desc);
+static void acpi_ex_dump_reference_obj(union acpi_operand_object *obj_desc);
static void
-acpi_ex_dump_package(union acpi_operand_object *obj_desc, u32 level, u32 index);
-#endif /* ACPI_FUTURE_USAGE */
+acpi_ex_dump_package_obj(union acpi_operand_object *obj_desc,
+ u32 level, u32 index);
+
+/*******************************************************************************
+ *
+ * Object Descriptor info tables
+ *
+ * Note: The first table entry must be an INIT opcode and must contain
+ * the table length (number of table entries)
+ *
+ ******************************************************************************/
+
+static struct acpi_exdump_info acpi_ex_dump_integer[2] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_integer), NULL},
+ {ACPI_EXD_UINT64, ACPI_EXD_OFFSET(integer.value), "Value"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_string[4] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_string), NULL},
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(string.length), "Length"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(string.pointer), "Pointer"},
+ {ACPI_EXD_STRING, 0, NULL}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_buffer[4] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_buffer), NULL},
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(buffer.length), "Length"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(buffer.pointer), "Pointer"},
+ {ACPI_EXD_BUFFER, 0, NULL}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_package[5] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_package), NULL},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(package.flags), "Flags"},
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(package.count), "Elements"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(package.elements), "Element List"},
+ {ACPI_EXD_PACKAGE, 0, NULL}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_device[4] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_device), NULL},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.handler), "Handler"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.system_notify),
+ "System Notify"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.device_notify),
+ "Device Notify"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_event[2] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_event), NULL},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(event.semaphore), "Semaphore"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_method[8] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_method), NULL},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.param_count), "param_count"},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.concurrency), "Concurrency"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(method.semaphore), "Semaphore"},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.owner_id), "Owner Id"},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.thread_count), "Thread Count"},
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(method.aml_length), "Aml Length"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(method.aml_start), "Aml Start"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_mutex[5] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_mutex), NULL},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(mutex.sync_level), "Sync Level"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(mutex.owner_thread), "Owner Thread"},
+ {ACPI_EXD_UINT16, ACPI_EXD_OFFSET(mutex.acquisition_depth),
+ "Acquire Depth"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(mutex.semaphore), "Semaphore"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_region[7] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_region), NULL},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(region.space_id), "Space Id"},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(region.flags), "Flags"},
+ {ACPI_EXD_ADDRESS, ACPI_EXD_OFFSET(region.address), "Address"},
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(region.length), "Length"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(region.handler), "Handler"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(region.next), "Next"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_power[5] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_power), NULL},
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(power_resource.system_level),
+ "System Level"},
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(power_resource.resource_order),
+ "Resource Order"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.system_notify),
+ "System Notify"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.device_notify),
+ "Device Notify"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_processor[7] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_processor), NULL},
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(processor.proc_id), "Processor ID"},
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(processor.length), "Length"},
+ {ACPI_EXD_ADDRESS, ACPI_EXD_OFFSET(processor.address), "Address"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.system_notify),
+ "System Notify"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.device_notify),
+ "Device Notify"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.handler), "Handler"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_thermal[4] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_thermal), NULL},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.system_notify),
+ "System Notify"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.device_notify),
+ "Device Notify"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.handler), "Handler"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_buffer_field[3] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_buffer_field), NULL},
+ {ACPI_EXD_FIELD, 0, NULL},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(buffer_field.buffer_obj),
+ "Buffer Object"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_region_field[3] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_region_field), NULL},
+ {ACPI_EXD_FIELD, 0, NULL},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(field.region_obj), "Region Object"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_bank_field[5] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_bank_field), NULL},
+ {ACPI_EXD_FIELD, 0, NULL},
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(bank_field.value), "Value"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(bank_field.region_obj),
+ "Region Object"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(bank_field.bank_obj), "Bank Object"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_index_field[5] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_bank_field), NULL},
+ {ACPI_EXD_FIELD, 0, NULL},
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(index_field.value), "Value"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(index_field.index_obj),
+ "Index Object"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(index_field.data_obj), "Data Object"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_reference[7] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_reference), NULL},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(reference.target_type), "Target Type"},
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(reference.offset), "Offset"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(reference.object), "Object Desc"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(reference.node), "Node"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(reference.where), "Where"},
+ {ACPI_EXD_REFERENCE, 0, NULL}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_address_handler[6] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_address_handler),
+ NULL},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(address_space.space_id), "Space Id"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(address_space.next), "Next"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(address_space.region_list),
+ "Region List"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(address_space.node), "Node"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(address_space.context), "Context"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_notify[3] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_notify), NULL},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.node), "Node"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.context), "Context"}
+};
+
+/* Miscellaneous tables */
+
+static struct acpi_exdump_info acpi_ex_dump_common[4] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_common), NULL},
+ {ACPI_EXD_TYPE, 0, NULL},
+ {ACPI_EXD_UINT16, ACPI_EXD_OFFSET(common.reference_count),
+ "Reference Count"},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(common.flags), "Flags"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_field_common[7] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_field_common), NULL},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(common_field.field_flags),
+ "Field Flags"},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(common_field.access_byte_width),
+ "Access Byte Width"},
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(common_field.bit_length),
+ "Bit Length"},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(common_field.start_field_bit_offset),
+ "Field Bit Offset"},
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(common_field.base_byte_offset),
+ "Base Byte Offset"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(common_field.node), "Parent Node"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_node[6] = {
+ {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_node), NULL},
+ {ACPI_EXD_UINT8, ACPI_EXD_NSOFFSET(flags), "Flags"},
+ {ACPI_EXD_UINT8, ACPI_EXD_NSOFFSET(owner_id), "Owner Id"},
+ {ACPI_EXD_UINT16, ACPI_EXD_NSOFFSET(reference_count),
+ "Reference Count"},
+ {ACPI_EXD_POINTER, ACPI_EXD_NSOFFSET(child), "Child List"},
+ {ACPI_EXD_POINTER, ACPI_EXD_NSOFFSET(peer), "Next Peer"}
+};
+
+/* Dispatch table, indexed by object type */
+
+static struct acpi_exdump_info *acpi_ex_dump_info[] = {
+ NULL,
+ acpi_ex_dump_integer,
+ acpi_ex_dump_string,
+ acpi_ex_dump_buffer,
+ acpi_ex_dump_package,
+ NULL,
+ acpi_ex_dump_device,
+ acpi_ex_dump_event,
+ acpi_ex_dump_method,
+ acpi_ex_dump_mutex,
+ acpi_ex_dump_region,
+ acpi_ex_dump_power,
+ acpi_ex_dump_processor,
+ acpi_ex_dump_thermal,
+ acpi_ex_dump_buffer_field,
+ NULL,
+ NULL,
+ acpi_ex_dump_region_field,
+ acpi_ex_dump_bank_field,
+ acpi_ex_dump_index_field,
+ acpi_ex_dump_reference,
+ NULL,
+ NULL,
+ acpi_ex_dump_notify,
+ acpi_ex_dump_address_handler,
+ NULL,
+ NULL,
+ NULL
+};
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_dump_object
+ *
+ * PARAMETERS: obj_desc - Descriptor to dump
+ * Info - Info table corresponding to this object
+ * type
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Walk the info table for this object
+ *
+ ******************************************************************************/
+
+static void
+acpi_ex_dump_object(union acpi_operand_object *obj_desc,
+ struct acpi_exdump_info *info)
+{
+ u8 *target;
+ char *name;
+ u8 count;
+
+ if (!info) {
+ acpi_os_printf
+ ("ex_dump_object: Display not implemented for object type %s\n",
+ acpi_ut_get_object_type_name(obj_desc));
+ return;
+ }
+
+ /* First table entry must contain the table length (# of table entries) */
+
+ count = info->offset;
+
+ while (count) {
+ target = ACPI_ADD_PTR(u8, obj_desc, info->offset);
+ name = info->name;
+
+ switch (info->opcode) {
+ case ACPI_EXD_INIT:
+ break;
+
+ case ACPI_EXD_TYPE:
+ acpi_ex_out_string("Type",
+ acpi_ut_get_object_type_name
+ (obj_desc));
+ break;
+
+ case ACPI_EXD_UINT8:
+
+ acpi_os_printf("%20s : %2.2X\n", name, *target);
+ break;
+
+ case ACPI_EXD_UINT16:
+
+ acpi_os_printf("%20s : %4.4X\n", name,
+ ACPI_GET16(target));
+ break;
+
+ case ACPI_EXD_UINT32:
+
+ acpi_os_printf("%20s : %8.8X\n", name,
+ ACPI_GET32(target));
+ break;
+
+ case ACPI_EXD_UINT64:
+
+ acpi_os_printf("%20s : %8.8X%8.8X\n", "Value",
+ ACPI_FORMAT_UINT64(ACPI_GET64(target)));
+ break;
+
+ case ACPI_EXD_POINTER:
+
+ acpi_ex_out_pointer(name,
+ *ACPI_CAST_PTR(void *, target));
+ break;
+
+ case ACPI_EXD_ADDRESS:
+
+ acpi_ex_out_address(name,
+ *ACPI_CAST_PTR
+ (acpi_physical_address, target));
+ break;
+
+ case ACPI_EXD_STRING:
+
+ acpi_ut_print_string(obj_desc->string.pointer,
+ ACPI_UINT8_MAX);
+ acpi_os_printf("\n");
+ break;
+
+ case ACPI_EXD_BUFFER:
+
+ ACPI_DUMP_BUFFER(obj_desc->buffer.pointer,
+ obj_desc->buffer.length);
+ break;
+
+ case ACPI_EXD_PACKAGE:
+
+ /* Dump the package contents */
+
+ acpi_os_printf("\nPackage Contents:\n");
+ acpi_ex_dump_package_obj(obj_desc, 0, 0);
+ break;
+
+ case ACPI_EXD_FIELD:
+
+ acpi_ex_dump_object(obj_desc,
+ acpi_ex_dump_field_common);
+ break;
+
+ case ACPI_EXD_REFERENCE:
+
+ acpi_ex_out_string("Opcode",
+ (acpi_ps_get_opcode_info
+ (obj_desc->reference.opcode))->
+ name);
+ acpi_ex_dump_reference_obj(obj_desc);
+ break;
+
+ default:
+ acpi_os_printf("**** Invalid table opcode [%X] ****\n",
+ info->opcode);
+ return;
+ }
+
+ info++;
+ count--;
+ }
+}
/*******************************************************************************
*
@@ -214,7 +580,7 @@
case ACPI_TYPE_BUFFER:
- acpi_os_printf("Buffer len %X @ %p \n",
+ acpi_os_printf("Buffer len %X @ %p\n",
obj_desc->buffer.length,
obj_desc->buffer.pointer);
@@ -320,17 +686,17 @@
case ACPI_TYPE_BUFFER_FIELD:
- acpi_os_printf("buffer_field: %X bits at byte %X bit %X of \n",
+ acpi_os_printf("buffer_field: %X bits at byte %X bit %X of\n",
obj_desc->buffer_field.bit_length,
obj_desc->buffer_field.base_byte_offset,
obj_desc->buffer_field.start_field_bit_offset);
if (!obj_desc->buffer_field.buffer_obj) {
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "*NULL* \n"));
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "*NULL*\n"));
} else
if (ACPI_GET_OBJECT_TYPE(obj_desc->buffer_field.buffer_obj)
!= ACPI_TYPE_BUFFER) {
- acpi_os_printf("*not a Buffer* \n");
+ acpi_os_printf("*not a Buffer*\n");
} else {
acpi_ex_dump_operand(obj_desc->buffer_field.buffer_obj,
depth + 1);
@@ -441,7 +807,6 @@
return;
}
-#ifdef ACPI_FUTURE_USAGE
/*******************************************************************************
*
* FUNCTION: acpi_ex_out* functions
@@ -465,11 +830,6 @@
acpi_os_printf("%20s : %p\n", title, value);
}
-static void acpi_ex_out_integer(char *title, u32 value)
-{
- acpi_os_printf("%20s : %.2X\n", title, value);
-}
-
static void acpi_ex_out_address(char *title, acpi_physical_address value)
{
@@ -482,16 +842,16 @@
/*******************************************************************************
*
- * FUNCTION: acpi_ex_dump_node
+ * FUNCTION: acpi_ex_dump_namespace_node
*
- * PARAMETERS: *Node - Descriptor to dump
+ * PARAMETERS: Node - Descriptor to dump
* Flags - Force display if TRUE
*
* DESCRIPTION: Dumps the members of the given.Node
*
******************************************************************************/
-void acpi_ex_dump_node(struct acpi_namespace_node *node, u32 flags)
+void acpi_ex_dump_namespace_node(struct acpi_namespace_node *node, u32 flags)
{
ACPI_FUNCTION_ENTRY();
@@ -506,19 +866,17 @@
acpi_os_printf("%20s : %4.4s\n", "Name", acpi_ut_get_node_name(node));
acpi_ex_out_string("Type", acpi_ut_get_type_name(node->type));
- acpi_ex_out_integer("Flags", node->flags);
- acpi_ex_out_integer("Owner Id", node->owner_id);
- acpi_ex_out_integer("Reference Count", node->reference_count);
acpi_ex_out_pointer("Attached Object",
acpi_ns_get_attached_object(node));
- acpi_ex_out_pointer("child_list", node->child);
- acpi_ex_out_pointer("next_peer", node->peer);
acpi_ex_out_pointer("Parent", acpi_ns_get_parent_node(node));
+
+ acpi_ex_dump_object(ACPI_CAST_PTR(union acpi_operand_object, node),
+ acpi_ex_dump_node);
}
/*******************************************************************************
*
- * FUNCTION: acpi_ex_dump_reference
+ * FUNCTION: acpi_ex_dump_reference_obj
*
* PARAMETERS: Object - Descriptor to dump
*
@@ -526,14 +884,16 @@
*
******************************************************************************/
-static void acpi_ex_dump_reference(union acpi_operand_object *obj_desc)
+static void acpi_ex_dump_reference_obj(union acpi_operand_object *obj_desc)
{
struct acpi_buffer ret_buf;
acpi_status status;
+ ret_buf.length = ACPI_ALLOCATE_LOCAL_BUFFER;
+
if (obj_desc->reference.opcode == AML_INT_NAMEPATH_OP) {
acpi_os_printf("Named Object %p ", obj_desc->reference.node);
- ret_buf.length = ACPI_ALLOCATE_LOCAL_BUFFER;
+
status =
acpi_ns_handle_to_pathname(obj_desc->reference.node,
&ret_buf);
@@ -551,9 +911,9 @@
/*******************************************************************************
*
- * FUNCTION: acpi_ex_dump_package
+ * FUNCTION: acpi_ex_dump_package_obj
*
- * PARAMETERS: Object - Descriptor to dump
+ * PARAMETERS: obj_desc - Descriptor to dump
* Level - Indentation Level
* Index - Package index for this object
*
@@ -562,7 +922,8 @@
******************************************************************************/
static void
-acpi_ex_dump_package(union acpi_operand_object *obj_desc, u32 level, u32 index)
+acpi_ex_dump_package_obj(union acpi_operand_object *obj_desc,
+ u32 level, u32 index)
{
u32 i;
@@ -608,7 +969,8 @@
acpi_os_printf("[Buffer] Length %.2X = ",
obj_desc->buffer.length);
if (obj_desc->buffer.length) {
- acpi_ut_dump_buffer((u8 *) obj_desc->buffer.pointer,
+ acpi_ut_dump_buffer(ACPI_CAST_PTR
+ (u8, obj_desc->buffer.pointer),
obj_desc->buffer.length,
DB_DWORD_DISPLAY, _COMPONENT);
} else {
@@ -618,19 +980,19 @@
case ACPI_TYPE_PACKAGE:
- acpi_os_printf("[Package] Contains %d Elements: \n",
+ acpi_os_printf("[Package] Contains %d Elements:\n",
obj_desc->package.count);
for (i = 0; i < obj_desc->package.count; i++) {
- acpi_ex_dump_package(obj_desc->package.elements[i],
- level + 1, i);
+ acpi_ex_dump_package_obj(obj_desc->package.elements[i],
+ level + 1, i);
}
break;
case ACPI_TYPE_LOCAL_REFERENCE:
acpi_os_printf("[Object Reference] ");
- acpi_ex_dump_reference(obj_desc);
+ acpi_ex_dump_reference_obj(obj_desc);
break;
default:
@@ -645,7 +1007,7 @@
*
* FUNCTION: acpi_ex_dump_object_descriptor
*
- * PARAMETERS: Object - Descriptor to dump
+ * PARAMETERS: obj_desc - Descriptor to dump
* Flags - Force display if TRUE
*
* DESCRIPTION: Dumps the members of the object descriptor given.
@@ -670,11 +1032,13 @@
}
if (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) == ACPI_DESC_TYPE_NAMED) {
- acpi_ex_dump_node((struct acpi_namespace_node *)obj_desc,
- flags);
+ acpi_ex_dump_namespace_node((struct acpi_namespace_node *)
+ obj_desc, flags);
+
acpi_os_printf("\nAttached Object (%p):\n",
((struct acpi_namespace_node *)obj_desc)->
object);
+
acpi_ex_dump_object_descriptor(((struct acpi_namespace_node *)
obj_desc)->object, flags);
return_VOID;
@@ -687,233 +1051,18 @@
return_VOID;
}
- /* Common Fields */
-
- acpi_ex_out_string("Type", acpi_ut_get_object_type_name(obj_desc));
- acpi_ex_out_integer("Reference Count",
- obj_desc->common.reference_count);
- acpi_ex_out_integer("Flags", obj_desc->common.flags);
-
- /* Object-specific Fields */
-
- switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
- case ACPI_TYPE_INTEGER:
-
- acpi_os_printf("%20s : %8.8X%8.8X\n", "Value",
- ACPI_FORMAT_UINT64(obj_desc->integer.value));
- break;
-
- case ACPI_TYPE_STRING:
-
- acpi_ex_out_integer("Length", obj_desc->string.length);
-
- acpi_os_printf("%20s : %p ", "Pointer",
- obj_desc->string.pointer);
- acpi_ut_print_string(obj_desc->string.pointer, ACPI_UINT8_MAX);
- acpi_os_printf("\n");
- break;
-
- case ACPI_TYPE_BUFFER:
-
- acpi_ex_out_integer("Length", obj_desc->buffer.length);
- acpi_ex_out_pointer("Pointer", obj_desc->buffer.pointer);
- ACPI_DUMP_BUFFER(obj_desc->buffer.pointer,
- obj_desc->buffer.length);
- break;
-
- case ACPI_TYPE_PACKAGE:
-
- acpi_ex_out_integer("Flags", obj_desc->package.flags);
- acpi_ex_out_integer("Elements", obj_desc->package.count);
- acpi_ex_out_pointer("Element List", obj_desc->package.elements);
-
- /* Dump the package contents */
-
- acpi_os_printf("\nPackage Contents:\n");
- acpi_ex_dump_package(obj_desc, 0, 0);
- break;
-
- case ACPI_TYPE_DEVICE:
-
- acpi_ex_out_pointer("Handler", obj_desc->device.handler);
- acpi_ex_out_pointer("system_notify",
- obj_desc->device.system_notify);
- acpi_ex_out_pointer("device_notify",
- obj_desc->device.device_notify);
- break;
-
- case ACPI_TYPE_EVENT:
-
- acpi_ex_out_pointer("Semaphore", obj_desc->event.semaphore);
- break;
-
- case ACPI_TYPE_METHOD:
-
- acpi_ex_out_integer("param_count",
- obj_desc->method.param_count);
- acpi_ex_out_integer("Concurrency",
- obj_desc->method.concurrency);
- acpi_ex_out_pointer("Semaphore", obj_desc->method.semaphore);
- acpi_ex_out_integer("owner_id", obj_desc->method.owner_id);
- acpi_ex_out_integer("aml_length", obj_desc->method.aml_length);
- acpi_ex_out_pointer("aml_start", obj_desc->method.aml_start);
- break;
-
- case ACPI_TYPE_MUTEX:
-
- acpi_ex_out_integer("sync_level", obj_desc->mutex.sync_level);
- acpi_ex_out_pointer("owner_thread",
- obj_desc->mutex.owner_thread);
- acpi_ex_out_integer("acquire_depth",
- obj_desc->mutex.acquisition_depth);
- acpi_ex_out_pointer("Semaphore", obj_desc->mutex.semaphore);
- break;
-
- case ACPI_TYPE_REGION:
-
- acpi_ex_out_integer("space_id", obj_desc->region.space_id);
- acpi_ex_out_integer("Flags", obj_desc->region.flags);
- acpi_ex_out_address("Address", obj_desc->region.address);
- acpi_ex_out_integer("Length", obj_desc->region.length);
- acpi_ex_out_pointer("Handler", obj_desc->region.handler);
- acpi_ex_out_pointer("Next", obj_desc->region.next);
- break;
-
- case ACPI_TYPE_POWER:
-
- acpi_ex_out_integer("system_level",
- obj_desc->power_resource.system_level);
- acpi_ex_out_integer("resource_order",
- obj_desc->power_resource.resource_order);
- acpi_ex_out_pointer("system_notify",
- obj_desc->power_resource.system_notify);
- acpi_ex_out_pointer("device_notify",
- obj_desc->power_resource.device_notify);
- break;
-
- case ACPI_TYPE_PROCESSOR:
-
- acpi_ex_out_integer("Processor ID",
- obj_desc->processor.proc_id);
- acpi_ex_out_integer("Length", obj_desc->processor.length);
- acpi_ex_out_address("Address",
- (acpi_physical_address) obj_desc->processor.
- address);
- acpi_ex_out_pointer("system_notify",
- obj_desc->processor.system_notify);
- acpi_ex_out_pointer("device_notify",
- obj_desc->processor.device_notify);
- acpi_ex_out_pointer("Handler", obj_desc->processor.handler);
- break;
-
- case ACPI_TYPE_THERMAL:
-
- acpi_ex_out_pointer("system_notify",
- obj_desc->thermal_zone.system_notify);
- acpi_ex_out_pointer("device_notify",
- obj_desc->thermal_zone.device_notify);
- acpi_ex_out_pointer("Handler", obj_desc->thermal_zone.handler);
- break;
-
- case ACPI_TYPE_BUFFER_FIELD:
- case ACPI_TYPE_LOCAL_REGION_FIELD:
- case ACPI_TYPE_LOCAL_BANK_FIELD:
- case ACPI_TYPE_LOCAL_INDEX_FIELD:
-
- acpi_ex_out_integer("field_flags",
- obj_desc->common_field.field_flags);
- acpi_ex_out_integer("access_byte_width",
- obj_desc->common_field.access_byte_width);
- acpi_ex_out_integer("bit_length",
- obj_desc->common_field.bit_length);
- acpi_ex_out_integer("fld_bit_offset",
- obj_desc->common_field.
- start_field_bit_offset);
- acpi_ex_out_integer("base_byte_offset",
- obj_desc->common_field.base_byte_offset);
- acpi_ex_out_pointer("parent_node", obj_desc->common_field.node);
-
- switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
- case ACPI_TYPE_BUFFER_FIELD:
- acpi_ex_out_pointer("buffer_obj",
- obj_desc->buffer_field.buffer_obj);
- break;
-
- case ACPI_TYPE_LOCAL_REGION_FIELD:
- acpi_ex_out_pointer("region_obj",
- obj_desc->field.region_obj);
- break;
-
- case ACPI_TYPE_LOCAL_BANK_FIELD:
- acpi_ex_out_integer("Value",
- obj_desc->bank_field.value);
- acpi_ex_out_pointer("region_obj",
- obj_desc->bank_field.region_obj);
- acpi_ex_out_pointer("bank_obj",
- obj_desc->bank_field.bank_obj);
- break;
-
- case ACPI_TYPE_LOCAL_INDEX_FIELD:
- acpi_ex_out_integer("Value",
- obj_desc->index_field.value);
- acpi_ex_out_pointer("Index",
- obj_desc->index_field.index_obj);
- acpi_ex_out_pointer("Data",
- obj_desc->index_field.data_obj);
- break;
-
- default:
- /* All object types covered above */
- break;
- }
- break;
-
- case ACPI_TYPE_LOCAL_REFERENCE:
-
- acpi_ex_out_integer("target_type",
- obj_desc->reference.target_type);
- acpi_ex_out_string("Opcode",
- (acpi_ps_get_opcode_info
- (obj_desc->reference.opcode))->name);
- acpi_ex_out_integer("Offset", obj_desc->reference.offset);
- acpi_ex_out_pointer("obj_desc", obj_desc->reference.object);
- acpi_ex_out_pointer("Node", obj_desc->reference.node);
- acpi_ex_out_pointer("Where", obj_desc->reference.where);
-
- acpi_ex_dump_reference(obj_desc);
- break;
-
- case ACPI_TYPE_LOCAL_ADDRESS_HANDLER:
-
- acpi_ex_out_integer("space_id",
- obj_desc->address_space.space_id);
- acpi_ex_out_pointer("Next", obj_desc->address_space.next);
- acpi_ex_out_pointer("region_list",
- obj_desc->address_space.region_list);
- acpi_ex_out_pointer("Node", obj_desc->address_space.node);
- acpi_ex_out_pointer("Context", obj_desc->address_space.context);
- break;
-
- case ACPI_TYPE_LOCAL_NOTIFY:
-
- acpi_ex_out_pointer("Node", obj_desc->notify.node);
- acpi_ex_out_pointer("Context", obj_desc->notify.context);
- break;
-
- case ACPI_TYPE_LOCAL_ALIAS:
- case ACPI_TYPE_LOCAL_METHOD_ALIAS:
- case ACPI_TYPE_LOCAL_EXTRA:
- case ACPI_TYPE_LOCAL_DATA:
- default:
-
- acpi_os_printf
- ("ex_dump_object_descriptor: Display not implemented for object type %s\n",
- acpi_ut_get_object_type_name(obj_desc));
- break;
+ if (obj_desc->common.type > ACPI_TYPE_NS_NODE_MAX) {
+ return_VOID;
}
+ /* Common Fields */
+
+ acpi_ex_dump_object(obj_desc, acpi_ex_dump_common);
+
+ /* Object-specific fields */
+
+ acpi_ex_dump_object(obj_desc, acpi_ex_dump_info[obj_desc->common.type]);
return_VOID;
}
-#endif /* ACPI_FUTURE_USAGE */
#endif
diff --git a/drivers/acpi/executer/exfield.c b/drivers/acpi/executer/exfield.c
index ab1ba39..e259201 100644
--- a/drivers/acpi/executer/exfield.c
+++ b/drivers/acpi/executer/exfield.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -249,13 +249,18 @@
* Source must be a buffer of sufficient size (ACPI_SMBUS_BUFFER_SIZE).
*/
if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_BUFFER) {
- ACPI_REPORT_ERROR(("SMBus write requires Buffer, found type %s\n", acpi_ut_get_object_type_name(source_desc)));
+ ACPI_ERROR((AE_INFO,
+ "SMBus write requires Buffer, found type %s",
+ acpi_ut_get_object_type_name(source_desc)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
if (source_desc->buffer.length < ACPI_SMBUS_BUFFER_SIZE) {
- ACPI_REPORT_ERROR(("SMBus write requires Buffer of length %X, found length %X\n", ACPI_SMBUS_BUFFER_SIZE, source_desc->buffer.length));
+ ACPI_ERROR((AE_INFO,
+ "SMBus write requires Buffer of length %X, found length %X",
+ ACPI_SMBUS_BUFFER_SIZE,
+ source_desc->buffer.length));
return_ACPI_STATUS(AE_AML_BUFFER_LIMIT);
}
diff --git a/drivers/acpi/executer/exfldio.c b/drivers/acpi/executer/exfldio.c
index ba6e088..bd1af35 100644
--- a/drivers/acpi/executer/exfldio.c
+++ b/drivers/acpi/executer/exfldio.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -94,10 +94,9 @@
/* We must have a valid region */
if (ACPI_GET_OBJECT_TYPE(rgn_desc) != ACPI_TYPE_REGION) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Needed Region, found type %X (%s)\n",
- ACPI_GET_OBJECT_TYPE(rgn_desc),
- acpi_ut_get_object_type_name(rgn_desc)));
+ ACPI_ERROR((AE_INFO, "Needed Region, found type %X (%s)",
+ ACPI_GET_OBJECT_TYPE(rgn_desc),
+ acpi_ut_get_object_type_name(rgn_desc)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -162,31 +161,28 @@
* than the region itself. For example, a region of length one
* byte, and a field with Dword access specified.
*/
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Field [%4.4s] access width (%d bytes) too large for region [%4.4s] (length %X)\n",
- acpi_ut_get_node_name(obj_desc->
- common_field.
- node),
- obj_desc->common_field.
- access_byte_width,
- acpi_ut_get_node_name(rgn_desc->
- region.node),
- rgn_desc->region.length));
+ ACPI_ERROR((AE_INFO,
+ "Field [%4.4s] access width (%d bytes) too large for region [%4.4s] (length %X)",
+ acpi_ut_get_node_name(obj_desc->
+ common_field.node),
+ obj_desc->common_field.access_byte_width,
+ acpi_ut_get_node_name(rgn_desc->region.
+ node),
+ rgn_desc->region.length));
}
/*
* Offset rounded up to next multiple of field width
* exceeds region length, indicate an error
*/
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Field [%4.4s] Base+Offset+Width %X+%X+%X is beyond end of region [%4.4s] (length %X)\n",
- acpi_ut_get_node_name(obj_desc->common_field.
- node),
- obj_desc->common_field.base_byte_offset,
- field_datum_byte_offset,
- obj_desc->common_field.access_byte_width,
- acpi_ut_get_node_name(rgn_desc->region.node),
- rgn_desc->region.length));
+ ACPI_ERROR((AE_INFO,
+ "Field [%4.4s] Base+Offset+Width %X+%X+%X is beyond end of region [%4.4s] (length %X)",
+ acpi_ut_get_node_name(obj_desc->common_field.node),
+ obj_desc->common_field.base_byte_offset,
+ field_datum_byte_offset,
+ obj_desc->common_field.access_byte_width,
+ acpi_ut_get_node_name(rgn_desc->region.node),
+ rgn_desc->region.length));
return_ACPI_STATUS(AE_AML_REGION_LIMIT);
}
@@ -270,18 +266,17 @@
if (ACPI_FAILURE(status)) {
if (status == AE_NOT_IMPLEMENTED) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Region %s(%X) not implemented\n",
- acpi_ut_get_region_name(rgn_desc->
- region.
- space_id),
- rgn_desc->region.space_id));
+ ACPI_ERROR((AE_INFO,
+ "Region %s(%X) not implemented",
+ acpi_ut_get_region_name(rgn_desc->region.
+ space_id),
+ rgn_desc->region.space_id));
} else if (status == AE_NOT_EXIST) {
- ACPI_REPORT_ERROR(("Region %s(%X) has no handler\n",
- acpi_ut_get_region_name(rgn_desc->
- region.
- space_id),
- rgn_desc->region.space_id));
+ ACPI_ERROR((AE_INFO,
+ "Region %s(%X) has no handler",
+ acpi_ut_get_region_name(rgn_desc->region.
+ space_id),
+ rgn_desc->region.space_id));
}
}
@@ -514,8 +509,8 @@
default:
- ACPI_REPORT_ERROR(("Wrong object type in field I/O %X\n",
- ACPI_GET_OBJECT_TYPE(obj_desc)));
+ ACPI_ERROR((AE_INFO, "Wrong object type in field I/O %X",
+ ACPI_GET_OBJECT_TYPE(obj_desc)));
status = AE_AML_INTERNAL;
break;
}
@@ -618,11 +613,11 @@
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "write_with_update_rule: Unknown update_rule setting: %X\n",
- (obj_desc->common_field.
- field_flags &
- AML_FIELD_UPDATE_RULE_MASK)));
+ ACPI_ERROR((AE_INFO,
+ "Unknown update_rule value: %X",
+ (obj_desc->common_field.
+ field_flags &
+ AML_FIELD_UPDATE_RULE_MASK)));
return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
}
}
@@ -677,10 +672,9 @@
if (buffer_length <
ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Field size %X (bits) is too large for buffer (%X)\n",
- obj_desc->common_field.bit_length,
- buffer_length));
+ ACPI_ERROR((AE_INFO,
+ "Field size %X (bits) is too large for buffer (%X)",
+ obj_desc->common_field.bit_length, buffer_length));
return_ACPI_STATUS(AE_BUFFER_OVERFLOW);
}
@@ -792,10 +786,9 @@
if (buffer_length <
ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Field size %X (bits) is too large for buffer (%X)\n",
- obj_desc->common_field.bit_length,
- buffer_length));
+ ACPI_ERROR((AE_INFO,
+ "Field size %X (bits) is too large for buffer (%X)",
+ obj_desc->common_field.bit_length, buffer_length));
return_ACPI_STATUS(AE_BUFFER_OVERFLOW);
}
diff --git a/drivers/acpi/executer/exmisc.c b/drivers/acpi/executer/exmisc.c
index a3f4d72..48c18d2 100644
--- a/drivers/acpi/executer/exmisc.c
+++ b/drivers/acpi/executer/exmisc.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -45,6 +45,7 @@
#include <acpi/acpi.h>
#include <acpi/acinterp.h>
#include <acpi/amlcode.h>
+#include <acpi/amlresrc.h>
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exmisc")
@@ -97,7 +98,8 @@
default:
- ACPI_REPORT_ERROR(("Unknown Reference opcode in get_reference %X\n", obj_desc->reference.opcode));
+ ACPI_ERROR((AE_INFO, "Unknown Reference opcode %X",
+ obj_desc->reference.opcode));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
break;
@@ -112,7 +114,8 @@
default:
- ACPI_REPORT_ERROR(("Invalid descriptor type in get_reference: %X\n", ACPI_GET_DESCRIPTOR_TYPE(obj_desc)));
+ ACPI_ERROR((AE_INFO, "Invalid descriptor type %X",
+ ACPI_GET_DESCRIPTOR_TYPE(obj_desc)));
return_ACPI_STATUS(AE_TYPE);
}
@@ -157,48 +160,65 @@
union acpi_operand_object **actual_return_desc,
struct acpi_walk_state *walk_state)
{
+ acpi_status status;
union acpi_operand_object *return_desc;
u8 *new_buf;
- u8 *end_tag1;
- u8 *end_tag2;
+ u8 *end_tag;
+ acpi_size length0;
acpi_size length1;
- acpi_size length2;
+ acpi_size new_length;
ACPI_FUNCTION_TRACE("ex_concat_template");
- /* Find the end_tags in each resource template */
+ /*
+ * Find the end_tag descriptor in each resource template.
+ * Note1: returned pointers point TO the end_tag, not past it.
+ * Note2: zero-length buffers are allowed; treated like one end_tag
+ */
- end_tag1 = acpi_ut_get_resource_end_tag(operand0);
- end_tag2 = acpi_ut_get_resource_end_tag(operand1);
- if (!end_tag1 || !end_tag2) {
- return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+ /* Get the length of the first resource template */
+
+ status = acpi_ut_get_resource_end_tag(operand0, &end_tag);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
}
- /* Compute the length of each part */
+ length0 = ACPI_PTR_DIFF(end_tag, operand0->buffer.pointer);
- length1 = ACPI_PTR_DIFF(end_tag1, operand0->buffer.pointer);
- length2 = ACPI_PTR_DIFF(end_tag2, operand1->buffer.pointer) + 2; /* Size of END_TAG */
+ /* Get the length of the second resource template */
- /* Create a new buffer object for the result */
+ status = acpi_ut_get_resource_end_tag(operand1, &end_tag);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
- return_desc = acpi_ut_create_buffer_object(length1 + length2);
+ length1 = ACPI_PTR_DIFF(end_tag, operand1->buffer.pointer);
+
+ /* Combine both lengths, minimum size will be 2 for end_tag */
+
+ new_length = length0 + length1 + sizeof(struct aml_resource_end_tag);
+
+ /* Create a new buffer object for the result (with one end_tag) */
+
+ return_desc = acpi_ut_create_buffer_object(new_length);
if (!return_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
- /* Copy the templates to the new descriptor */
-
+ /*
+ * Copy the templates to the new buffer, 0 first, then 1 follows. One
+ * end_tag descriptor is copied from Operand1.
+ */
new_buf = return_desc->buffer.pointer;
- ACPI_MEMCPY(new_buf, operand0->buffer.pointer, length1);
- ACPI_MEMCPY(new_buf + length1, operand1->buffer.pointer, length2);
+ ACPI_MEMCPY(new_buf, operand0->buffer.pointer, length0);
+ ACPI_MEMCPY(new_buf + length0, operand1->buffer.pointer, length1);
- /* Compute the new checksum */
+ /* Insert end_tag and set the checksum to zero, means "ignore checksum" */
- new_buf[return_desc->buffer.length - 1] =
- acpi_ut_generate_checksum(return_desc->buffer.pointer,
- (return_desc->buffer.length - 1));
+ new_buf[new_length - 1] = 0;
+ new_buf[new_length - 2] = ACPI_RESOURCE_NAME_END_TAG | 1;
- /* Return the completed template descriptor */
+ /* Return the completed resource template */
*actual_return_desc = return_desc;
return_ACPI_STATUS(AE_OK);
@@ -229,7 +249,6 @@
union acpi_operand_object *return_desc;
char *new_buf;
acpi_status status;
- acpi_size new_length;
ACPI_FUNCTION_TRACE("ex_do_concatenate");
@@ -256,8 +275,8 @@
break;
default:
- ACPI_REPORT_ERROR(("Concat - invalid obj type: %X\n",
- ACPI_GET_OBJECT_TYPE(operand0)));
+ ACPI_ERROR((AE_INFO, "Invalid object type: %X",
+ ACPI_GET_OBJECT_TYPE(operand0)));
status = AE_AML_INTERNAL;
}
@@ -296,8 +315,7 @@
/* Copy the first integer, LSB first */
- ACPI_MEMCPY(new_buf,
- &operand0->integer.value,
+ ACPI_MEMCPY(new_buf, &operand0->integer.value,
acpi_gbl_integer_byte_width);
/* Copy the second integer (LSB first) after the first */
@@ -311,14 +329,11 @@
/* Result of two Strings is a String */
- new_length = (acpi_size) operand0->string.length +
- (acpi_size) local_operand1->string.length;
- if (new_length > ACPI_MAX_STRING_CONVERSION) {
- status = AE_AML_STRING_LIMIT;
- goto cleanup;
- }
-
- return_desc = acpi_ut_create_string_object(new_length);
+ return_desc = acpi_ut_create_string_object((acpi_size)
+ (operand0->string.
+ length +
+ local_operand1->
+ string.length));
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
@@ -338,11 +353,10 @@
/* Result of two Buffers is a Buffer */
return_desc = acpi_ut_create_buffer_object((acpi_size)
- operand0->buffer.
- length +
- (acpi_size)
- local_operand1->
- buffer.length);
+ (operand0->buffer.
+ length +
+ local_operand1->
+ buffer.length));
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
@@ -352,8 +366,8 @@
/* Concatenate the buffers */
- ACPI_MEMCPY(new_buf,
- operand0->buffer.pointer, operand0->buffer.length);
+ ACPI_MEMCPY(new_buf, operand0->buffer.pointer,
+ operand0->buffer.length);
ACPI_MEMCPY(new_buf + operand0->buffer.length,
local_operand1->buffer.pointer,
local_operand1->buffer.length);
@@ -363,8 +377,8 @@
/* Invalid object type, should not happen here */
- ACPI_REPORT_ERROR(("Concatenate - Invalid object type: %X\n",
- ACPI_GET_OBJECT_TYPE(operand0)));
+ ACPI_ERROR((AE_INFO, "Invalid object type: %X",
+ ACPI_GET_OBJECT_TYPE(operand0)));
status = AE_AML_INTERNAL;
goto cleanup;
}
@@ -625,9 +639,8 @@
/* Lexicographic compare: compare the data bytes */
- compare = ACPI_MEMCMP((const char *)operand0->buffer.pointer,
- (const char *)local_operand1->buffer.
- pointer,
+ compare = ACPI_MEMCMP(operand0->buffer.pointer,
+ local_operand1->buffer.pointer,
(length0 > length1) ? length1 : length0);
switch (opcode) {
diff --git a/drivers/acpi/executer/exmutex.c b/drivers/acpi/executer/exmutex.c
index ab47f6d..f843b22 100644
--- a/drivers/acpi/executer/exmutex.c
+++ b/drivers/acpi/executer/exmutex.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -153,7 +153,9 @@
/* Sanity check -- we must have a valid thread ID */
if (!walk_state->thread) {
- ACPI_REPORT_ERROR(("Cannot acquire Mutex [%4.4s], null thread info\n", acpi_ut_get_node_name(obj_desc->mutex.node)));
+ ACPI_ERROR((AE_INFO,
+ "Cannot acquire Mutex [%4.4s], null thread info",
+ acpi_ut_get_node_name(obj_desc->mutex.node)));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
@@ -162,7 +164,9 @@
* mutex. This mechanism provides some deadlock prevention
*/
if (walk_state->thread->current_sync_level > obj_desc->mutex.sync_level) {
- ACPI_REPORT_ERROR(("Cannot acquire Mutex [%4.4s], incorrect sync_level\n", acpi_ut_get_node_name(obj_desc->mutex.node)));
+ ACPI_ERROR((AE_INFO,
+ "Cannot acquire Mutex [%4.4s], incorrect sync_level",
+ acpi_ut_get_node_name(obj_desc->mutex.node)));
return_ACPI_STATUS(AE_AML_MUTEX_ORDER);
}
@@ -237,14 +241,18 @@
/* The mutex must have been previously acquired in order to release it */
if (!obj_desc->mutex.owner_thread) {
- ACPI_REPORT_ERROR(("Cannot release Mutex [%4.4s], not acquired\n", acpi_ut_get_node_name(obj_desc->mutex.node)));
+ ACPI_ERROR((AE_INFO,
+ "Cannot release Mutex [%4.4s], not acquired",
+ acpi_ut_get_node_name(obj_desc->mutex.node)));
return_ACPI_STATUS(AE_AML_MUTEX_NOT_ACQUIRED);
}
/* Sanity check -- we must have a valid thread ID */
if (!walk_state->thread) {
- ACPI_REPORT_ERROR(("Cannot release Mutex [%4.4s], null thread info\n", acpi_ut_get_node_name(obj_desc->mutex.node)));
+ ACPI_ERROR((AE_INFO,
+ "Cannot release Mutex [%4.4s], null thread info",
+ acpi_ut_get_node_name(obj_desc->mutex.node)));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
@@ -255,7 +263,11 @@
if ((obj_desc->mutex.owner_thread->thread_id !=
walk_state->thread->thread_id)
&& (obj_desc->mutex.semaphore != acpi_gbl_global_lock_semaphore)) {
- ACPI_REPORT_ERROR(("Thread %X cannot release Mutex [%4.4s] acquired by thread %X\n", walk_state->thread->thread_id, acpi_ut_get_node_name(obj_desc->mutex.node), obj_desc->mutex.owner_thread->thread_id));
+ ACPI_ERROR((AE_INFO,
+ "Thread %X cannot release Mutex [%4.4s] acquired by thread %X",
+ walk_state->thread->thread_id,
+ acpi_ut_get_node_name(obj_desc->mutex.node),
+ obj_desc->mutex.owner_thread->thread_id));
return_ACPI_STATUS(AE_AML_NOT_OWNER);
}
@@ -264,7 +276,9 @@
* equal to the current sync level
*/
if (obj_desc->mutex.sync_level > walk_state->thread->current_sync_level) {
- ACPI_REPORT_ERROR(("Cannot release Mutex [%4.4s], incorrect sync_level\n", acpi_ut_get_node_name(obj_desc->mutex.node)));
+ ACPI_ERROR((AE_INFO,
+ "Cannot release Mutex [%4.4s], incorrect sync_level",
+ acpi_ut_get_node_name(obj_desc->mutex.node)));
return_ACPI_STATUS(AE_AML_MUTEX_ORDER);
}
diff --git a/drivers/acpi/executer/exnames.c b/drivers/acpi/executer/exnames.c
index 239d847..054fe5e 100644
--- a/drivers/acpi/executer/exnames.c
+++ b/drivers/acpi/executer/exnames.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -99,7 +99,8 @@
*/
name_string = ACPI_MEM_ALLOCATE(size_needed);
if (!name_string) {
- ACPI_REPORT_ERROR(("ex_allocate_name_string: Could not allocate size %d\n", size_needed));
+ ACPI_ERROR((AE_INFO,
+ "Could not allocate size %d", size_needed));
return_PTR(NULL);
}
@@ -167,8 +168,7 @@
char_buf[0] = *aml_address;
if ('0' <= char_buf[0] && char_buf[0] <= '9') {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "leading digit: %c\n",
- char_buf[0]));
+ ACPI_ERROR((AE_INFO, "Invalid leading digit: %c", char_buf[0]));
return_ACPI_STATUS(AE_CTRL_PENDING);
}
@@ -191,10 +191,10 @@
if (name_string) {
ACPI_STRCAT(name_string, char_buf);
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
- "Appended to - %s \n", name_string));
+ "Appended to - %s\n", name_string));
} else {
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
- "No Name string - %s \n", char_buf));
+ "No Name string - %s\n", char_buf));
}
} else if (index == 0) {
/*
@@ -211,12 +211,12 @@
* the required 4
*/
status = AE_AML_BAD_NAME;
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Bad character %02x in name, at %p\n",
- *aml_address, aml_address));
+ ACPI_ERROR((AE_INFO,
+ "Bad character %02x in name, at %p",
+ *aml_address, aml_address));
}
- *in_aml_address = (u8 *) aml_address;
+ *in_aml_address = ACPI_CAST_PTR(u8, aml_address);
return_ACPI_STATUS(status);
}
@@ -412,8 +412,7 @@
if (AE_CTRL_PENDING == status && has_prefix) {
/* Ran out of segments after processing a prefix */
- ACPI_REPORT_ERROR(("ex_do_name: Malformed Name at %p\n",
- name_string));
+ ACPI_ERROR((AE_INFO, "Malformed Name at %p", name_string));
status = AE_AML_BAD_NAME;
}
diff --git a/drivers/acpi/executer/exoparg1.c b/drivers/acpi/executer/exoparg1.c
index 97e3454..23d0823 100644
--- a/drivers/acpi/executer/exoparg1.c
+++ b/drivers/acpi/executer/exoparg1.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -111,7 +111,8 @@
default: /* Unknown opcode */
- ACPI_REPORT_ERROR(("acpi_ex_opcode_0A_0T_1R: Unknown opcode %X\n", walk_state->opcode));
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ walk_state->opcode));
status = AE_AML_BAD_OPCODE;
break;
}
@@ -188,7 +189,8 @@
default: /* Unknown opcode */
- ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_0T_0R: Unknown opcode %X\n", walk_state->opcode));
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ walk_state->opcode));
status = AE_AML_BAD_OPCODE;
break;
}
@@ -227,7 +229,8 @@
default: /* Unknown opcode */
- ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_1T_0R: Unknown opcode %X\n", walk_state->opcode));
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
@@ -346,9 +349,9 @@
/* Check the range of the digit */
if (temp32 > 9) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "BCD digit too large (not decimal): 0x%X\n",
- temp32));
+ ACPI_ERROR((AE_INFO,
+ "BCD digit too large (not decimal): 0x%X",
+ temp32));
status = AE_AML_NUMERIC_OVERFLOW;
goto cleanup;
@@ -393,12 +396,10 @@
/* Overflow if there is any data left in Digit */
if (digit > 0) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Integer too large to convert to BCD: %8.8X%8.8X\n",
- ACPI_FORMAT_UINT64(operand
- [0]->
- integer.
- value)));
+ ACPI_ERROR((AE_INFO,
+ "Integer too large to convert to BCD: %8.8X%8.8X",
+ ACPI_FORMAT_UINT64(operand[0]->
+ integer.value)));
status = AE_AML_NUMERIC_OVERFLOW;
goto cleanup;
}
@@ -525,15 +526,16 @@
/* These are two obsolete opcodes */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "%s is obsolete and not implemented\n",
- acpi_ps_get_opcode_name(walk_state->opcode)));
+ ACPI_ERROR((AE_INFO,
+ "%s is obsolete and not implemented",
+ acpi_ps_get_opcode_name(walk_state->opcode)));
status = AE_SUPPORT;
goto cleanup;
default: /* Unknown opcode */
- ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_1T_1R: Unknown opcode %X\n", walk_state->opcode));
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
@@ -639,11 +641,10 @@
acpi_ex_resolve_operands(AML_LNOT_OP, &temp_desc,
walk_state);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "%s: bad operand(s) %s\n",
- acpi_ps_get_opcode_name(walk_state->
- opcode),
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "While resolving operands for [%s]",
+ acpi_ps_get_opcode_name(walk_state->
+ opcode)));
goto cleanup;
}
@@ -742,9 +743,9 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "size_of - Operand is not Buf/Int/Str/Pkg - found type %s\n",
- acpi_ut_get_type_name(type)));
+ ACPI_ERROR((AE_INFO,
+ "Operand is not Buf/Int/Str/Pkg - found type %s",
+ acpi_ut_get_type_name(type)));
status = AE_AML_OPERAND_TYPE;
goto cleanup;
}
@@ -941,11 +942,10 @@
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unknown Index target_type %X in obj %p\n",
- operand[0]->reference.
- target_type,
- operand[0]));
+ ACPI_ERROR((AE_INFO,
+ "Unknown Index target_type %X in obj %p",
+ operand[0]->reference.
+ target_type, operand[0]));
status = AE_AML_OPERAND_TYPE;
goto cleanup;
}
@@ -971,11 +971,10 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unknown opcode in ref(%p) - %X\n",
- operand[0],
- operand[0]->reference.
- opcode));
+ ACPI_ERROR((AE_INFO,
+ "Unknown opcode in ref(%p) - %X",
+ operand[0],
+ operand[0]->reference.opcode));
status = AE_TYPE;
goto cleanup;
@@ -985,7 +984,8 @@
default:
- ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_0T_1R: Unknown opcode %X\n", walk_state->opcode));
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
diff --git a/drivers/acpi/executer/exoparg2.c b/drivers/acpi/executer/exoparg2.c
index 8d70c6b..e263a5d 100644
--- a/drivers/acpi/executer/exoparg2.c
+++ b/drivers/acpi/executer/exoparg2.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -111,9 +111,9 @@
/* Are notifies allowed on this object? */
if (!acpi_ev_is_notify_object(node)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unexpected notify object type [%s]\n",
- acpi_ut_get_type_name(node->type)));
+ ACPI_ERROR((AE_INFO,
+ "Unexpected notify object type [%s]",
+ acpi_ut_get_type_name(node->type)));
status = AE_AML_OPERAND_TYPE;
break;
@@ -157,7 +157,8 @@
default:
- ACPI_REPORT_ERROR(("acpi_ex_opcode_2A_0T_0R: Unknown opcode %X\n", walk_state->opcode));
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ walk_state->opcode));
status = AE_AML_BAD_OPCODE;
}
@@ -221,7 +222,8 @@
default:
- ACPI_REPORT_ERROR(("acpi_ex_opcode_2A_2T_1R: Unknown opcode %X\n", walk_state->opcode));
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
@@ -344,10 +346,6 @@
(length < operand[1]->integer.value) &&
(operand[0]->buffer.pointer[length])) {
length++;
- if (length > ACPI_MAX_STRING_CONVERSION) {
- status = AE_AML_STRING_LIMIT;
- goto cleanup;
- }
}
/* Allocate a new string object */
@@ -358,8 +356,10 @@
goto cleanup;
}
- /* Copy the raw buffer data with no transform. NULL terminated already */
-
+ /*
+ * Copy the raw buffer data with no transform.
+ * (NULL terminated already)
+ */
ACPI_MEMCPY(return_desc->string.pointer,
operand[0]->buffer.pointer, length);
break;
@@ -391,10 +391,10 @@
/* Object to be indexed is a Package */
if (index >= operand[0]->package.count) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Index value (%X%8.8X) beyond package end (%X)\n",
- ACPI_FORMAT_UINT64(index),
- operand[0]->package.count));
+ ACPI_ERROR((AE_INFO,
+ "Index value (%X%8.8X) beyond package end (%X)",
+ ACPI_FORMAT_UINT64(index),
+ operand[0]->package.count));
status = AE_AML_PACKAGE_LIMIT;
goto cleanup;
}
@@ -407,10 +407,10 @@
/* Object to be indexed is a Buffer/String */
if (index >= operand[0]->buffer.length) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Index value (%X%8.8X) beyond end of buffer (%X)\n",
- ACPI_FORMAT_UINT64(index),
- operand[0]->buffer.length));
+ ACPI_ERROR((AE_INFO,
+ "Index value (%X%8.8X) beyond end of buffer (%X)",
+ ACPI_FORMAT_UINT64(index),
+ operand[0]->buffer.length));
status = AE_AML_BUFFER_LIMIT;
goto cleanup;
}
@@ -442,7 +442,8 @@
default:
- ACPI_REPORT_ERROR(("acpi_ex_opcode_2A_1T_1R: Unknown opcode %X\n", walk_state->opcode));
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ walk_state->opcode));
status = AE_AML_BAD_OPCODE;
break;
}
@@ -546,7 +547,8 @@
default:
- ACPI_REPORT_ERROR(("acpi_ex_opcode_2A_0T_1R: Unknown opcode %X\n", walk_state->opcode));
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
diff --git a/drivers/acpi/executer/exoparg3.c b/drivers/acpi/executer/exoparg3.c
index 4833657..6a3a883 100644
--- a/drivers/acpi/executer/exoparg3.c
+++ b/drivers/acpi/executer/exoparg3.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -119,7 +119,8 @@
default:
- ACPI_REPORT_ERROR(("acpi_ex_opcode_3A_0T_0R: Unknown opcode %X\n", walk_state->opcode));
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
@@ -223,8 +224,8 @@
goto cleanup;
}
- if (length > 0) {
- /* Copy the portion requested */
+ if (buffer) {
+ /* We have a buffer, copy the portion requested */
ACPI_MEMCPY(buffer, operand[0]->string.pointer + index,
length);
@@ -242,7 +243,8 @@
default:
- ACPI_REPORT_ERROR(("acpi_ex_opcode_3A_0T_0R: Unknown opcode %X\n", walk_state->opcode));
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
diff --git a/drivers/acpi/executer/exoparg6.c b/drivers/acpi/executer/exoparg6.c
index 5dee771..e043d92 100644
--- a/drivers/acpi/executer/exoparg6.c
+++ b/drivers/acpi/executer/exoparg6.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -234,8 +234,7 @@
if ((operand[1]->integer.value > MAX_MATCH_OPERATOR) ||
(operand[3]->integer.value > MAX_MATCH_OPERATOR)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Match operator out of range\n"));
+ ACPI_ERROR((AE_INFO, "Match operator out of range"));
status = AE_AML_OPERAND_VALUE;
goto cleanup;
}
@@ -244,10 +243,10 @@
index = operand[5]->integer.value;
if (index >= operand[0]->package.count) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Index (%X%8.8X) beyond package end (%X)\n",
- ACPI_FORMAT_UINT64(index),
- operand[0]->package.count));
+ ACPI_ERROR((AE_INFO,
+ "Index (%X%8.8X) beyond package end (%X)",
+ ACPI_FORMAT_UINT64(index),
+ operand[0]->package.count));
status = AE_AML_PACKAGE_LIMIT;
goto cleanup;
}
@@ -316,7 +315,8 @@
default:
- ACPI_REPORT_ERROR(("acpi_ex_opcode_6A_0T_1R: Unknown opcode %X\n", walk_state->opcode));
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
diff --git a/drivers/acpi/executer/exprep.c b/drivers/acpi/executer/exprep.c
index 7476c36..7719ae5 100644
--- a/drivers/acpi/executer/exprep.c
+++ b/drivers/acpi/executer/exprep.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -274,9 +274,8 @@
default:
/* Invalid field access type */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unknown field access type %X\n", access));
- return_VALUE(0);
+ ACPI_ERROR((AE_INFO, "Unknown field access type %X", access));
+ return_UINT32(0);
}
if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_BUFFER_FIELD) {
@@ -289,7 +288,7 @@
}
*return_byte_alignment = byte_alignment;
- return_VALUE(bit_length);
+ return_UINT32(bit_length);
}
/*******************************************************************************
@@ -422,15 +421,15 @@
if (info->field_type != ACPI_TYPE_LOCAL_INDEX_FIELD) {
if (!info->region_node) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null region_node\n"));
+ ACPI_ERROR((AE_INFO, "Null region_node"));
return_ACPI_STATUS(AE_AML_NO_OPERAND);
}
type = acpi_ns_get_type(info->region_node);
if (type != ACPI_TYPE_REGION) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Needed Region, found type %X (%s)\n",
- type, acpi_ut_get_type_name(type)));
+ ACPI_ERROR((AE_INFO,
+ "Needed Region, found type %X (%s)",
+ type, acpi_ut_get_type_name(type)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -499,17 +498,17 @@
case ACPI_TYPE_LOCAL_INDEX_FIELD:
+ /* Get the Index and Data registers */
+
obj_desc->index_field.index_obj =
acpi_ns_get_attached_object(info->register_node);
obj_desc->index_field.data_obj =
acpi_ns_get_attached_object(info->data_register_node);
- obj_desc->index_field.value = (u32)
- (info->field_bit_position /
- ACPI_MUL_8(obj_desc->field.access_byte_width));
if (!obj_desc->index_field.data_obj
|| !obj_desc->index_field.index_obj) {
- ACPI_REPORT_ERROR(("Null Index Object during field prep\n"));
+ ACPI_ERROR((AE_INFO,
+ "Null Index Object during field prep"));
acpi_ut_delete_object_desc(obj_desc);
return_ACPI_STATUS(AE_AML_INTERNAL);
}
@@ -519,6 +518,15 @@
acpi_ut_add_reference(obj_desc->index_field.data_obj);
acpi_ut_add_reference(obj_desc->index_field.index_obj);
+ /*
+ * The value written to the Index register is the byte offset of the
+ * target field
+ * Note: may change code to: ACPI_DIV_8 (Info->field_bit_position)
+ */
+ obj_desc->index_field.value = (u32)
+ (info->field_bit_position /
+ ACPI_MUL_8(obj_desc->field.access_byte_width));
+
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"index_field: bit_off %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
obj_desc->index_field.start_field_bit_offset,
diff --git a/drivers/acpi/executer/exregion.c b/drivers/acpi/executer/exregion.c
index 9a2f5be..6a4cfdf 100644
--- a/drivers/acpi/executer/exregion.c
+++ b/drivers/acpi/executer/exregion.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -77,7 +77,7 @@
struct acpi_mem_space_context *mem_info = region_context;
u32 length;
acpi_size window_size;
-#ifndef ACPI_MISALIGNED_TRANSFERS
+#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
u32 remainder;
#endif
@@ -103,13 +103,12 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid system_memory width %d\n",
- bit_width));
+ ACPI_ERROR((AE_INFO, "Invalid system_memory width %d",
+ bit_width));
return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
}
-#ifndef ACPI_MISALIGNED_TRANSFERS
+#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
/*
* Hardware does not support non-aligned data transfers, we must verify
* the request.
@@ -159,10 +158,10 @@
(void **)&mem_info->
mapped_logical_address);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not map memory at %8.8X%8.8X, size %X\n",
- ACPI_FORMAT_UINT64(address),
- (u32) window_size));
+ ACPI_ERROR((AE_INFO,
+ "Could not map memory at %8.8X%8.8X, size %X",
+ ACPI_FORMAT_UINT64(address),
+ (u32) window_size));
mem_info->mapped_length = 0;
return_ACPI_STATUS(status);
}
@@ -199,20 +198,20 @@
*value = 0;
switch (bit_width) {
case 8:
- *value = (acpi_integer) * ((u8 *) logical_addr_ptr);
+ *value = (acpi_integer) ACPI_GET8(logical_addr_ptr);
break;
case 16:
- *value = (acpi_integer) * ((u16 *) logical_addr_ptr);
+ *value = (acpi_integer) ACPI_GET16(logical_addr_ptr);
break;
case 32:
- *value = (acpi_integer) * ((u32 *) logical_addr_ptr);
+ *value = (acpi_integer) ACPI_GET32(logical_addr_ptr);
break;
#if ACPI_MACHINE_WIDTH != 16
case 64:
- *value = (acpi_integer) * ((u64 *) logical_addr_ptr);
+ *value = (acpi_integer) ACPI_GET64(logical_addr_ptr);
break;
#endif
default:
@@ -225,20 +224,20 @@
switch (bit_width) {
case 8:
- *(u8 *) logical_addr_ptr = (u8) * value;
+ ACPI_SET8(logical_addr_ptr) = (u8) * value;
break;
case 16:
- *(u16 *) logical_addr_ptr = (u16) * value;
+ ACPI_SET16(logical_addr_ptr) = (u16) * value;
break;
case 32:
- *(u32 *) logical_addr_ptr = (u32) * value;
+ ACPI_SET32(logical_addr_ptr) = (u32) * value;
break;
#if ACPI_MACHINE_WIDTH != 16
case 64:
- *(u64 *) logical_addr_ptr = (u64) * value;
+ ACPI_SET64(logical_addr_ptr) = (u64) * value;
break;
#endif
diff --git a/drivers/acpi/executer/exresnte.c b/drivers/acpi/executer/exresnte.c
index ff5d8f9..01b26c8 100644
--- a/drivers/acpi/executer/exresnte.c
+++ b/drivers/acpi/executer/exresnte.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -122,8 +122,7 @@
}
if (!source_desc) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "No object attached to node %p\n", node));
+ ACPI_ERROR((AE_INFO, "No object attached to node %p", node));
return_ACPI_STATUS(AE_AML_NO_OPERAND);
}
@@ -135,10 +134,8 @@
case ACPI_TYPE_PACKAGE:
if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_PACKAGE) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Object not a Package, type %s\n",
- acpi_ut_get_object_type_name
- (source_desc)));
+ ACPI_ERROR((AE_INFO, "Object not a Package, type %s",
+ acpi_ut_get_object_type_name(source_desc)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -154,10 +151,8 @@
case ACPI_TYPE_BUFFER:
if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_BUFFER) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Object not a Buffer, type %s\n",
- acpi_ut_get_object_type_name
- (source_desc)));
+ ACPI_ERROR((AE_INFO, "Object not a Buffer, type %s",
+ acpi_ut_get_object_type_name(source_desc)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -173,10 +168,8 @@
case ACPI_TYPE_STRING:
if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_STRING) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Object not a String, type %s\n",
- acpi_ut_get_object_type_name
- (source_desc)));
+ ACPI_ERROR((AE_INFO, "Object not a String, type %s",
+ acpi_ut_get_object_type_name(source_desc)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -189,10 +182,8 @@
case ACPI_TYPE_INTEGER:
if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_INTEGER) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Object not a Integer, type %s\n",
- acpi_ut_get_object_type_name
- (source_desc)));
+ ACPI_ERROR((AE_INFO, "Object not a Integer, type %s",
+ acpi_ut_get_object_type_name(source_desc)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -236,9 +227,8 @@
case ACPI_TYPE_ANY:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Untyped entry %p, no attached object!\n",
- node));
+ ACPI_ERROR((AE_INFO,
+ "Untyped entry %p, no attached object!", node));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE); /* Cannot be AE_TYPE */
@@ -257,12 +247,11 @@
default:
/* No named references are allowed here */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unsupported Reference opcode %X (%s)\n",
- source_desc->reference.opcode,
- acpi_ps_get_opcode_name(source_desc->
- reference.
- opcode)));
+ ACPI_ERROR((AE_INFO,
+ "Unsupported Reference opcode %X (%s)",
+ source_desc->reference.opcode,
+ acpi_ps_get_opcode_name(source_desc->
+ reference.opcode)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -272,9 +261,9 @@
/* Default case is for unknown types */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Node %p - Unknown object type %X\n",
- node, entry_type));
+ ACPI_ERROR((AE_INFO,
+ "Node %p - Unknown object type %X",
+ node, entry_type));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
diff --git a/drivers/acpi/executer/exresolv.c b/drivers/acpi/executer/exresolv.c
index 97eecbd..1deed49 100644
--- a/drivers/acpi/executer/exresolv.c
+++ b/drivers/acpi/executer/exresolv.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -81,7 +81,7 @@
ACPI_FUNCTION_TRACE_PTR("ex_resolve_to_value", stack_ptr);
if (!stack_ptr || !*stack_ptr) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Internal - null pointer\n"));
+ ACPI_ERROR((AE_INFO, "Internal - null pointer"));
return_ACPI_STATUS(AE_AML_NO_OPERAND);
}
@@ -97,8 +97,7 @@
}
if (!*stack_ptr) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Internal - null pointer\n"));
+ ACPI_ERROR((AE_INFO, "Internal - null pointer"));
return_ACPI_STATUS(AE_AML_NO_OPERAND);
}
}
@@ -228,9 +227,9 @@
* A NULL object descriptor means an unitialized element of
* the package, can't dereference it
*/
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Attempt to deref an Index to NULL pkg element Idx=%p\n",
- stack_desc));
+ ACPI_ERROR((AE_INFO,
+ "Attempt to deref an Index to NULL pkg element Idx=%p",
+ stack_desc));
status = AE_AML_UNINITIALIZED_ELEMENT;
}
break;
@@ -239,7 +238,10 @@
/* Invalid reference object */
- ACPI_REPORT_ERROR(("During resolve, Unknown target_type %X in Index/Reference obj %p\n", stack_desc->reference.target_type, stack_desc));
+ ACPI_ERROR((AE_INFO,
+ "Unknown target_type %X in Index/Reference obj %p",
+ stack_desc->reference.target_type,
+ stack_desc));
status = AE_AML_INTERNAL;
break;
}
@@ -264,7 +266,10 @@
default:
- ACPI_REPORT_ERROR(("During resolve, Unknown Reference opcode %X (%s) in %p\n", opcode, acpi_ps_get_opcode_name(opcode), stack_desc));
+ ACPI_ERROR((AE_INFO,
+ "Unknown Reference opcode %X (%s) in %p",
+ opcode, acpi_ps_get_opcode_name(opcode),
+ stack_desc));
status = AE_AML_INTERNAL;
break;
}
@@ -386,7 +391,9 @@
if (ACPI_GET_DESCRIPTOR_TYPE(node) !=
ACPI_DESC_TYPE_NAMED) {
- ACPI_REPORT_ERROR(("acpi_ex_resolve_multiple: Not a NS node %p [%s]\n", node, acpi_ut_get_descriptor_name(node)));
+ ACPI_ERROR((AE_INFO, "Not a NS node %p [%s]",
+ node,
+ acpi_ut_get_descriptor_name(node)));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
@@ -442,7 +449,9 @@
if (ACPI_GET_DESCRIPTOR_TYPE(node) !=
ACPI_DESC_TYPE_NAMED) {
- ACPI_REPORT_ERROR(("acpi_ex_resolve_multiple: Not a NS node %p [%s]\n", node, acpi_ut_get_descriptor_name(node)));
+ ACPI_ERROR((AE_INFO, "Not a NS node %p [%s]",
+ node,
+ acpi_ut_get_descriptor_name(node)));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
@@ -511,7 +520,9 @@
default:
- ACPI_REPORT_ERROR(("acpi_ex_resolve_multiple: Unknown Reference subtype %X\n", obj_desc->reference.opcode));
+ ACPI_ERROR((AE_INFO,
+ "Unknown Reference subtype %X",
+ obj_desc->reference.opcode));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
}
diff --git a/drivers/acpi/executer/exresop.c b/drivers/acpi/executer/exresop.c
index ff064e7..a1c000f 100644
--- a/drivers/acpi/executer/exresop.c
+++ b/drivers/acpi/executer/exresop.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -46,6 +46,7 @@
#include <acpi/amlcode.h>
#include <acpi/acparser.h>
#include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exresop")
@@ -73,7 +74,7 @@
acpi_ex_check_object_type(acpi_object_type type_needed,
acpi_object_type this_type, void *object)
{
- ACPI_FUNCTION_NAME("ex_check_object_type");
+ ACPI_FUNCTION_ENTRY();
if (type_needed == ACPI_TYPE_ANY) {
/* All types OK, so we don't perform any typechecks */
@@ -95,10 +96,10 @@
}
if (type_needed != this_type) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Needed [%s], found [%s] %p\n",
- acpi_ut_get_type_name(type_needed),
- acpi_ut_get_type_name(this_type), object));
+ ACPI_ERROR((AE_INFO,
+ "Needed type [%s], found [%s] %p",
+ acpi_ut_get_type_name(type_needed),
+ acpi_ut_get_type_name(this_type), object));
return (AE_AML_OPERAND_TYPE);
}
@@ -151,13 +152,13 @@
arg_types = op_info->runtime_args;
if (arg_types == ARGI_INVALID_OPCODE) {
- ACPI_REPORT_ERROR(("resolve_operands: %X is not a valid AML opcode\n", opcode));
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode %X", opcode));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "Opcode %X [%s] required_operand_types=%8.8X \n",
+ "Opcode %X [%s] required_operand_types=%8.8X\n",
opcode, op_info->name, arg_types));
/*
@@ -169,7 +170,8 @@
*/
while (GET_CURRENT_ARG_TYPE(arg_types)) {
if (!stack_ptr || !*stack_ptr) {
- ACPI_REPORT_ERROR(("resolve_operands: Null stack entry at %p\n", stack_ptr));
+ ACPI_ERROR((AE_INFO, "Null stack entry at %p",
+ stack_ptr));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
@@ -187,6 +189,22 @@
object_type =
((struct acpi_namespace_node *)obj_desc)->type;
+
+ /*
+ * Resolve an alias object. The construction of these objects
+ * guarantees that there is only one level of alias indirection;
+ * thus, the attached object is always the aliased namespace node
+ */
+ if (object_type == ACPI_TYPE_LOCAL_ALIAS) {
+ obj_desc =
+ acpi_ns_get_attached_object((struct
+ acpi_namespace_node
+ *)obj_desc);
+ *stack_ptr = obj_desc;
+ object_type =
+ ((struct acpi_namespace_node *)obj_desc)->
+ type;
+ }
break;
case ACPI_DESC_TYPE_OPERAND:
@@ -198,9 +216,9 @@
/* Check for bad acpi_object_type */
if (!acpi_ut_valid_object_type(object_type)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Bad operand object type [%X]\n",
- object_type));
+ ACPI_ERROR((AE_INFO,
+ "Bad operand object type [%X]",
+ object_type));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -238,13 +256,10 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Operand is a Reference, Unknown Reference Opcode %X [%s]\n",
- obj_desc->reference.
- opcode,
- (acpi_ps_get_opcode_info
- (obj_desc->reference.
- opcode))->name));
+ ACPI_ERROR((AE_INFO,
+ "Operand is a Reference, Unknown Reference Opcode: %X",
+ obj_desc->reference.
+ opcode));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -255,11 +270,10 @@
/* Invalid descriptor */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid descriptor %p [%s]\n",
- obj_desc,
- acpi_ut_get_descriptor_name
- (obj_desc)));
+ ACPI_ERROR((AE_INFO,
+ "Invalid descriptor %p [%s]",
+ obj_desc,
+ acpi_ut_get_descriptor_name(obj_desc)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -417,11 +431,10 @@
acpi_ex_convert_to_integer(obj_desc, stack_ptr, 16);
if (ACPI_FAILURE(status)) {
if (status == AE_TYPE) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Needed [Integer/String/Buffer], found [%s] %p\n",
- acpi_ut_get_object_type_name
- (obj_desc),
- obj_desc));
+ ACPI_ERROR((AE_INFO,
+ "Needed [Integer/String/Buffer], found [%s] %p",
+ acpi_ut_get_object_type_name
+ (obj_desc), obj_desc));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -444,11 +457,10 @@
status = acpi_ex_convert_to_buffer(obj_desc, stack_ptr);
if (ACPI_FAILURE(status)) {
if (status == AE_TYPE) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Needed [Integer/String/Buffer], found [%s] %p\n",
- acpi_ut_get_object_type_name
- (obj_desc),
- obj_desc));
+ ACPI_ERROR((AE_INFO,
+ "Needed [Integer/String/Buffer], found [%s] %p",
+ acpi_ut_get_object_type_name
+ (obj_desc), obj_desc));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -472,11 +484,10 @@
ACPI_IMPLICIT_CONVERT_HEX);
if (ACPI_FAILURE(status)) {
if (status == AE_TYPE) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Needed [Integer/String/Buffer], found [%s] %p\n",
- acpi_ut_get_object_type_name
- (obj_desc),
- obj_desc));
+ ACPI_ERROR((AE_INFO,
+ "Needed [Integer/String/Buffer], found [%s] %p",
+ acpi_ut_get_object_type_name
+ (obj_desc), obj_desc));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -502,10 +513,10 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Needed [Integer/String/Buffer], found [%s] %p\n",
- acpi_ut_get_object_type_name
- (obj_desc), obj_desc));
+ ACPI_ERROR((AE_INFO,
+ "Needed [Integer/String/Buffer], found [%s] %p",
+ acpi_ut_get_object_type_name
+ (obj_desc), obj_desc));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -539,10 +550,10 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Needed [Integer/String/Buffer], found [%s] %p\n",
- acpi_ut_get_object_type_name
- (obj_desc), obj_desc));
+ ACPI_ERROR((AE_INFO,
+ "Needed [Integer/String/Buffer], found [%s] %p",
+ acpi_ut_get_object_type_name
+ (obj_desc), obj_desc));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -566,10 +577,10 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Needed [Buffer/String/Package/Reference], found [%s] %p\n",
- acpi_ut_get_object_type_name
- (obj_desc), obj_desc));
+ ACPI_ERROR((AE_INFO,
+ "Needed [Buffer/String/Package/Reference], found [%s] %p",
+ acpi_ut_get_object_type_name
+ (obj_desc), obj_desc));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -588,10 +599,10 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Needed [Buffer/String/Package], found [%s] %p\n",
- acpi_ut_get_object_type_name
- (obj_desc), obj_desc));
+ ACPI_ERROR((AE_INFO,
+ "Needed [Buffer/String/Package], found [%s] %p",
+ acpi_ut_get_object_type_name
+ (obj_desc), obj_desc));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -611,10 +622,10 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Needed [Region/region_field], found [%s] %p\n",
- acpi_ut_get_object_type_name
- (obj_desc), obj_desc));
+ ACPI_ERROR((AE_INFO,
+ "Needed [Region/region_field], found [%s] %p",
+ acpi_ut_get_object_type_name
+ (obj_desc), obj_desc));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -656,10 +667,10 @@
break;
}
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Needed Integer/Buffer/String/Package/Ref/Ddb], found [%s] %p\n",
- acpi_ut_get_object_type_name
- (obj_desc), obj_desc));
+ ACPI_ERROR((AE_INFO,
+ "Needed Integer/Buffer/String/Package/Ref/Ddb], found [%s] %p",
+ acpi_ut_get_object_type_name
+ (obj_desc), obj_desc));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -669,9 +680,9 @@
/* Unknown type */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Internal - Unknown ARGI (required operand) type %X\n",
- this_arg_type));
+ ACPI_ERROR((AE_INFO,
+ "Internal - Unknown ARGI (required operand) type %X",
+ this_arg_type));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
diff --git a/drivers/acpi/executer/exstore.c b/drivers/acpi/executer/exstore.c
index a7d8eea..3f020c0 100644
--- a/drivers/acpi/executer/exstore.c
+++ b/drivers/acpi/executer/exstore.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -250,7 +250,7 @@
/* Validate parameters */
if (!source_desc || !dest_desc) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null parameter\n"));
+ ACPI_ERROR((AE_INFO, "Null parameter"));
return_ACPI_STATUS(AE_AML_NO_OPERAND);
}
@@ -290,10 +290,10 @@
/* Destination is not a Reference object */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Target is not a Reference or Constant object - %s [%p]\n",
- acpi_ut_get_object_type_name(dest_desc),
- dest_desc));
+ ACPI_ERROR((AE_INFO,
+ "Target is not a Reference or Constant object - %s [%p]",
+ acpi_ut_get_object_type_name(dest_desc),
+ dest_desc));
ACPI_DUMP_STACK_ENTRY(source_desc);
ACPI_DUMP_STACK_ENTRY(dest_desc);
@@ -360,8 +360,8 @@
default:
- ACPI_REPORT_ERROR(("ex_store: Unknown Reference opcode %X\n",
- ref_desc->reference.opcode));
+ ACPI_ERROR((AE_INFO, "Unknown Reference opcode %X",
+ ref_desc->reference.opcode));
ACPI_DUMP_ENTRY(ref_desc, ACPI_LV_ERROR);
status = AE_AML_INTERNAL;
@@ -490,10 +490,9 @@
/* All other types are invalid */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Source must be Integer/Buffer/String type, not %s\n",
- acpi_ut_get_object_type_name
- (source_desc)));
+ ACPI_ERROR((AE_INFO,
+ "Source must be Integer/Buffer/String type, not %s",
+ acpi_ut_get_object_type_name(source_desc)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -503,8 +502,8 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Target is not a Package or buffer_field\n"));
+ ACPI_ERROR((AE_INFO,
+ "Target is not a Package or buffer_field"));
status = AE_AML_OPERAND_TYPE;
break;
}
diff --git a/drivers/acpi/executer/exstoren.c b/drivers/acpi/executer/exstoren.c
index 382f63c..42967ba 100644
--- a/drivers/acpi/executer/exstoren.c
+++ b/drivers/acpi/executer/exstoren.c
@@ -7,7 +7,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -123,11 +123,10 @@
&& (source_desc->reference.opcode == AML_LOAD_OP))) {
/* Conversion successful but still not a valid type */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Cannot assign type %s to %s (must be type Int/Str/Buf)\n",
- acpi_ut_get_object_type_name
- (source_desc),
- acpi_ut_get_type_name(target_type)));
+ ACPI_ERROR((AE_INFO,
+ "Cannot assign type %s to %s (must be type Int/Str/Buf)",
+ acpi_ut_get_object_type_name(source_desc),
+ acpi_ut_get_type_name(target_type)));
status = AE_AML_OPERAND_TYPE;
}
break;
@@ -135,9 +134,11 @@
case ACPI_TYPE_LOCAL_ALIAS:
case ACPI_TYPE_LOCAL_METHOD_ALIAS:
- /* Aliases are resolved by acpi_ex_prep_operands */
-
- ACPI_REPORT_ERROR(("Store into Alias - should never happen\n"));
+ /*
+ * All aliases should have been resolved earlier, during the
+ * operand resolution phase.
+ */
+ ACPI_ERROR((AE_INFO, "Store into an unresolved Alias object"));
status = AE_AML_INTERNAL;
break;
@@ -280,9 +281,8 @@
/*
* All other types come here.
*/
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Store into type %s not implemented\n",
- acpi_ut_get_object_type_name(dest_desc)));
+ ACPI_WARNING((AE_INFO, "Store into type %s not implemented",
+ acpi_ut_get_object_type_name(dest_desc)));
status = AE_NOT_IMPLEMENTED;
break;
diff --git a/drivers/acpi/executer/exstorob.c b/drivers/acpi/executer/exstorob.c
index c4ff654..6ab7070 100644
--- a/drivers/acpi/executer/exstorob.c
+++ b/drivers/acpi/executer/exstorob.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -71,7 +71,7 @@
/* We know that source_desc is a buffer by now */
- buffer = (u8 *) source_desc->buffer.pointer;
+ buffer = ACPI_CAST_PTR(u8, source_desc->buffer.pointer);
length = source_desc->buffer.length;
/*
@@ -160,7 +160,7 @@
/* We know that source_desc is a string by now */
- buffer = (u8 *) source_desc->string.pointer;
+ buffer = ACPI_CAST_PTR(u8, source_desc->string.pointer);
length = source_desc->string.length;
/*
diff --git a/drivers/acpi/executer/exsystem.c b/drivers/acpi/executer/exsystem.c
index 8a88b84..ea9144f 100644
--- a/drivers/acpi/executer/exsystem.c
+++ b/drivers/acpi/executer/exsystem.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -129,8 +129,8 @@
* (ACPI specifies 100 usec as max, but this gives some slack in
* order to support existing BIOSs)
*/
- ACPI_REPORT_ERROR(("Stall: Time parameter is too large (%d)\n",
- how_long));
+ ACPI_ERROR((AE_INFO, "Time parameter is too large (%d)",
+ how_long));
status = AE_AML_OPERAND_VALUE;
} else {
acpi_os_stall(how_long);
diff --git a/drivers/acpi/executer/exutils.c b/drivers/acpi/executer/exutils.c
index 1ee79d8..f73a61a 100644
--- a/drivers/acpi/executer/exutils.c
+++ b/drivers/acpi/executer/exutils.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -91,7 +91,7 @@
status = acpi_ut_acquire_mutex(ACPI_MTX_EXECUTE);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not acquire interpreter mutex\n"));
+ ACPI_ERROR((AE_INFO, "Could not acquire interpreter mutex"));
}
return_ACPI_STATUS(status);
@@ -127,7 +127,7 @@
status = acpi_ut_release_mutex(ACPI_MTX_EXECUTE);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not release interpreter mutex\n"));
+ ACPI_ERROR((AE_INFO, "Could not release interpreter mutex"));
}
return_VOID;
@@ -200,13 +200,12 @@
if (ACPI_SUCCESS(status)) {
locked = TRUE;
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not acquire Global Lock, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not acquire Global Lock"));
}
}
- return_VALUE(locked);
+ return_UINT8(locked);
}
/*******************************************************************************
@@ -237,7 +236,8 @@
if (ACPI_FAILURE(status)) {
/* Report the error, but there isn't much else we can do */
- ACPI_REPORT_ERROR(("Could not release ACPI Global Lock, %s\n", acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not release ACPI Global Lock"));
}
}
@@ -268,7 +268,7 @@
/* acpi_integer is unsigned, so we don't worry about a '-' prefix */
if (value == 0) {
- return_VALUE(1);
+ return_UINT32(1);
}
current_value = value;
@@ -282,7 +282,7 @@
num_digits++;
}
- return_VALUE(num_digits);
+ return_UINT32(num_digits);
}
/*******************************************************************************
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index aa99371..8daef57 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -99,15 +99,15 @@
unsigned long *busnr = (unsigned long *)data;
struct acpi_resource_address64 address;
- if (resource->id != ACPI_RSTYPE_ADDRESS16 &&
- resource->id != ACPI_RSTYPE_ADDRESS32 &&
- resource->id != ACPI_RSTYPE_ADDRESS64)
+ if (resource->type != ACPI_RESOURCE_TYPE_ADDRESS16 &&
+ resource->type != ACPI_RESOURCE_TYPE_ADDRESS32 &&
+ resource->type != ACPI_RESOURCE_TYPE_ADDRESS64)
return AE_OK;
acpi_resource_to_address64(resource, &address);
if ((address.address_length > 0) &&
(address.resource_type == ACPI_BUS_NUMBER_RANGE))
- *busnr = address.min_address_range;
+ *busnr = address.minimum;
return AE_OK;
}
diff --git a/drivers/acpi/hardware/hwacpi.c b/drivers/acpi/hardware/hwacpi.c
index 1bb3463..ea2f132 100644
--- a/drivers/acpi/hardware/hwacpi.c
+++ b/drivers/acpi/hardware/hwacpi.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -68,8 +68,7 @@
/* We must have the ACPI tables by the time we get here */
if (!acpi_gbl_FADT) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "No FADT is present\n"));
-
+ ACPI_ERROR((AE_INFO, "No FADT is present"));
return_ACPI_STATUS(AE_NO_ACPI_TABLES);
}
@@ -108,7 +107,8 @@
* system does not support mode transition.
*/
if (!acpi_gbl_FADT->smi_cmd) {
- ACPI_REPORT_ERROR(("No SMI_CMD in FADT, mode transition failed.\n"));
+ ACPI_ERROR((AE_INFO,
+ "No SMI_CMD in FADT, mode transition failed"));
return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
}
@@ -120,7 +120,8 @@
* transitions are not supported.
*/
if (!acpi_gbl_FADT->acpi_enable && !acpi_gbl_FADT->acpi_disable) {
- ACPI_REPORT_ERROR(("No ACPI mode transition supported in this system (enable/disable both zero)\n"));
+ ACPI_ERROR((AE_INFO,
+ "No ACPI mode transition supported in this system (enable/disable both zero)"));
return_ACPI_STATUS(AE_OK);
}
@@ -154,8 +155,8 @@
}
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not write mode change, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not write ACPI mode change"));
return_ACPI_STATUS(status);
}
@@ -175,7 +176,7 @@
retry--;
}
- ACPI_REPORT_ERROR(("Hardware never changed modes\n"));
+ ACPI_ERROR((AE_INFO, "Hardware did not change modes"));
return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
}
@@ -204,18 +205,18 @@
* system does not support mode transition.
*/
if (!acpi_gbl_FADT->smi_cmd) {
- return_VALUE(ACPI_SYS_MODE_ACPI);
+ return_UINT32(ACPI_SYS_MODE_ACPI);
}
status =
acpi_get_register(ACPI_BITREG_SCI_ENABLE, &value, ACPI_MTX_LOCK);
if (ACPI_FAILURE(status)) {
- return_VALUE(ACPI_SYS_MODE_LEGACY);
+ return_UINT32(ACPI_SYS_MODE_LEGACY);
}
if (value) {
- return_VALUE(ACPI_SYS_MODE_ACPI);
+ return_UINT32(ACPI_SYS_MODE_ACPI);
} else {
- return_VALUE(ACPI_SYS_MODE_LEGACY);
+ return_UINT32(ACPI_SYS_MODE_LEGACY);
}
}
diff --git a/drivers/acpi/hardware/hwgpe.c b/drivers/acpi/hardware/hwgpe.c
index 5c8e5df..d84942d 100644
--- a/drivers/acpi/hardware/hwgpe.c
+++ b/drivers/acpi/hardware/hwgpe.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/hardware/hwregs.c b/drivers/acpi/hardware/hwregs.c
index 536a7ae..e1fe754 100644
--- a/drivers/acpi/hardware/hwregs.c
+++ b/drivers/acpi/hardware/hwregs.c
@@ -7,7 +7,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -144,7 +144,8 @@
info.parameters = NULL;
info.return_object = NULL;
- sleep_state_name = (char *)acpi_gbl_sleep_state_names[sleep_state];
+ sleep_state_name =
+ ACPI_CAST_PTR(char, acpi_gbl_sleep_state_names[sleep_state]);
status = acpi_ns_evaluate_by_name(sleep_state_name, &info);
if (ACPI_FAILURE(status)) {
@@ -159,15 +160,16 @@
/* Must have a return object */
if (!info.return_object) {
- ACPI_REPORT_ERROR(("No Sleep State object returned from [%s]\n",
- sleep_state_name));
+ ACPI_ERROR((AE_INFO, "No Sleep State object returned from [%s]",
+ sleep_state_name));
status = AE_NOT_EXIST;
}
/* It must be of type Package */
else if (ACPI_GET_OBJECT_TYPE(info.return_object) != ACPI_TYPE_PACKAGE) {
- ACPI_REPORT_ERROR(("Sleep State return object is not a Package\n"));
+ ACPI_ERROR((AE_INFO,
+ "Sleep State return object is not a Package"));
status = AE_AML_OPERAND_TYPE;
}
@@ -179,7 +181,8 @@
* one per sleep type (A/B).
*/
else if (info.return_object->package.count < 2) {
- ACPI_REPORT_ERROR(("Sleep State return package does not have at least two elements\n"));
+ ACPI_ERROR((AE_INFO,
+ "Sleep State return package does not have at least two elements"));
status = AE_AML_NO_OPERAND;
}
@@ -189,7 +192,12 @@
!= ACPI_TYPE_INTEGER) ||
(ACPI_GET_OBJECT_TYPE(info.return_object->package.elements[1])
!= ACPI_TYPE_INTEGER)) {
- ACPI_REPORT_ERROR(("Sleep State return package elements are not both Integers (%s, %s)\n", acpi_ut_get_object_type_name(info.return_object->package.elements[0]), acpi_ut_get_object_type_name(info.return_object->package.elements[1])));
+ ACPI_ERROR((AE_INFO,
+ "Sleep State return package elements are not both Integers (%s, %s)",
+ acpi_ut_get_object_type_name(info.return_object->
+ package.elements[0]),
+ acpi_ut_get_object_type_name(info.return_object->
+ package.elements[1])));
status = AE_AML_OPERAND_TYPE;
} else {
/* Valid _Sx_ package size, type, and value */
@@ -201,12 +209,11 @@
}
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "%s While evaluating sleep_state [%s], bad Sleep object %p type %s\n",
- acpi_format_exception(status),
- sleep_state_name, info.return_object,
- acpi_ut_get_object_type_name(info.
- return_object)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "While evaluating sleep_state [%s], bad Sleep object %p type %s",
+ sleep_state_name, info.return_object,
+ acpi_ut_get_object_type_name(info.
+ return_object)));
}
acpi_ut_remove_reference(info.return_object);
@@ -229,12 +236,11 @@
struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id)
{
- ACPI_FUNCTION_NAME("hw_get_bit_register_info");
+ ACPI_FUNCTION_ENTRY();
if (register_id > ACPI_BITREG_MAX) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid bit_register ID: %X\n",
- register_id));
+ ACPI_ERROR((AE_INFO, "Invalid bit_register ID: %X",
+ register_id));
return (NULL);
}
@@ -334,8 +340,8 @@
bit_reg_info = acpi_hw_get_bit_register_info(register_id);
if (!bit_reg_info) {
- ACPI_REPORT_ERROR(("Bad ACPI HW register_id: %X\n",
- register_id));
+ ACPI_ERROR((AE_INFO, "Bad ACPI HW register_id: %X",
+ register_id));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
@@ -569,8 +575,7 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown Register ID: %X\n",
- register_id));
+ ACPI_ERROR((AE_INFO, "Unknown Register ID: %X", register_id));
status = AE_BAD_PARAMETER;
break;
}
@@ -765,9 +770,9 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unsupported address space: %X\n",
- reg->address_space_id));
+ ACPI_ERROR((AE_INFO,
+ "Unsupported address space: %X",
+ reg->address_space_id));
return (AE_BAD_PARAMETER);
}
@@ -836,9 +841,9 @@
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unsupported address space: %X\n",
- reg->address_space_id));
+ ACPI_ERROR((AE_INFO,
+ "Unsupported address space: %X",
+ reg->address_space_id));
return (AE_BAD_PARAMETER);
}
diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c
index 3451906..8926927 100644
--- a/drivers/acpi/hardware/hwsleep.c
+++ b/drivers/acpi/hardware/hwsleep.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -199,8 +199,8 @@
status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_REPORT_ERROR(("Method _SST failed, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "While executing method _SST"));
}
return_ACPI_STATUS(AE_OK);
@@ -232,9 +232,8 @@
if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
(acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
- ACPI_REPORT_ERROR(("Sleep values out of range: A=%X B=%X\n",
- acpi_gbl_sleep_type_a,
- acpi_gbl_sleep_type_b));
+ ACPI_ERROR((AE_INFO, "Sleep values out of range: A=%X B=%X",
+ acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
}
@@ -533,21 +532,18 @@
arg.integer.value = ACPI_SST_WAKING;
status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_REPORT_ERROR(("Method _SST failed, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
}
arg.integer.value = sleep_state;
status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_REPORT_ERROR(("Method _BFS failed, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
}
status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_REPORT_ERROR(("Method _WAK failed, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "During Method _WAK"));
}
/* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
@@ -582,8 +578,7 @@
arg.integer.value = ACPI_SST_WORKING;
status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_REPORT_ERROR(("Method _SST failed, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
}
return_ACPI_STATUS(status);
diff --git a/drivers/acpi/hardware/hwtimer.c b/drivers/acpi/hardware/hwtimer.c
index aff6dc1..fc10b7c 100644
--- a/drivers/acpi/hardware/hwtimer.c
+++ b/drivers/acpi/hardware/hwtimer.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/motherboard.c b/drivers/acpi/motherboard.c
index e928e8c..4682441 100644
--- a/drivers/acpi/motherboard.c
+++ b/drivers/acpi/motherboard.c
@@ -54,36 +54,36 @@
ACPI_FUNCTION_TRACE("acpi_reserve_io_ranges");
- if (res->id == ACPI_RSTYPE_IO) {
+ if (res->type == ACPI_RESOURCE_TYPE_IO) {
struct acpi_resource_io *io_res = &res->data.io;
- if (io_res->min_base_address != io_res->max_base_address)
+ if (io_res->minimum != io_res->maximum)
return_VALUE(AE_OK);
if (IS_RESERVED_ADDR
- (io_res->min_base_address, io_res->range_length)) {
+ (io_res->minimum, io_res->address_length)) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Motherboard resources 0x%08x - 0x%08x\n",
- io_res->min_base_address,
- io_res->min_base_address +
- io_res->range_length));
+ io_res->minimum,
+ io_res->minimum +
+ io_res->address_length));
requested_res =
- request_region(io_res->min_base_address,
- io_res->range_length, "motherboard");
+ request_region(io_res->minimum,
+ io_res->address_length, "motherboard");
}
- } else if (res->id == ACPI_RSTYPE_FIXED_IO) {
+ } else if (res->type == ACPI_RESOURCE_TYPE_FIXED_IO) {
struct acpi_resource_fixed_io *fixed_io_res =
&res->data.fixed_io;
if (IS_RESERVED_ADDR
- (fixed_io_res->base_address, fixed_io_res->range_length)) {
+ (fixed_io_res->address, fixed_io_res->address_length)) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Motherboard resources 0x%08x - 0x%08x\n",
- fixed_io_res->base_address,
- fixed_io_res->base_address +
- fixed_io_res->range_length));
+ fixed_io_res->address,
+ fixed_io_res->address +
+ fixed_io_res->address_length));
requested_res =
- request_region(fixed_io_res->base_address,
- fixed_io_res->range_length,
+ request_region(fixed_io_res->address,
+ fixed_io_res->address_length,
"motherboard");
}
} else {
diff --git a/drivers/acpi/namespace/nsaccess.c b/drivers/acpi/namespace/nsaccess.c
index edfbe34..1149bc1 100644
--- a/drivers/acpi/namespace/nsaccess.c
+++ b/drivers/acpi/namespace/nsaccess.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -110,10 +110,9 @@
ACPI_NS_NO_UPSEARCH, NULL, &new_node);
if (ACPI_FAILURE(status) || (!new_node)) { /* Must be on same line for code converter */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not create predefined name %s, %s\n",
- init_val->name,
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not create predefined name %s",
+ init_val->name));
}
/*
@@ -124,9 +123,9 @@
if (init_val->val) {
status = acpi_os_predefined_override(init_val, &val);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not override predefined %s\n",
- init_val->name));
+ ACPI_ERROR((AE_INFO,
+ "Could not override predefined %s",
+ init_val->name));
}
if (!val) {
@@ -233,7 +232,9 @@
default:
- ACPI_REPORT_ERROR(("Unsupported initial type value %X\n", init_val->type));
+ ACPI_ERROR((AE_INFO,
+ "Unsupported initial type value %X",
+ init_val->type));
acpi_ut_remove_reference(obj_desc);
obj_desc = NULL;
continue;
@@ -339,7 +340,9 @@
prefix_node = scope_info->scope.node;
if (ACPI_GET_DESCRIPTOR_TYPE(prefix_node) !=
ACPI_DESC_TYPE_NAMED) {
- ACPI_REPORT_ERROR(("ns_lookup: %p is not a namespace node [%s]\n", prefix_node, acpi_ut_get_descriptor_name(prefix_node)));
+ ACPI_ERROR((AE_INFO, "%p is not a namespace node [%s]",
+ prefix_node,
+ acpi_ut_get_descriptor_name(prefix_node)));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
@@ -429,7 +432,8 @@
if (!this_node) {
/* Current scope has no parent scope */
- ACPI_REPORT_ERROR(("ACPI path has too many parent prefixes (^) - reached beyond root node\n"));
+ ACPI_ERROR((AE_INFO,
+ "ACPI path has too many parent prefixes (^) - reached beyond root node"));
return_ACPI_STATUS(AE_NOT_FOUND);
}
}
@@ -498,7 +502,7 @@
path++;
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
- "Multi Pathname (%d Segments, Flags=%X) \n",
+ "Multi Pathname (%d Segments, Flags=%X)\n",
num_segments, flags));
break;
@@ -600,7 +604,12 @@
(this_node->type != type_to_check_for)) {
/* Complain about a type mismatch */
- ACPI_REPORT_WARNING(("ns_lookup: Type mismatch on %4.4s (%s), searching for (%s)\n", (char *)&simple_name, acpi_ut_get_type_name(this_node->type), acpi_ut_get_type_name(type_to_check_for)));
+ ACPI_WARNING((AE_INFO,
+ "ns_lookup: Type mismatch on %4.4s (%s), searching for (%s)",
+ ACPI_CAST_PTR(char, &simple_name),
+ acpi_ut_get_type_name(this_node->type),
+ acpi_ut_get_type_name
+ (type_to_check_for)));
}
/*
diff --git a/drivers/acpi/namespace/nsalloc.c b/drivers/acpi/namespace/nsalloc.c
index cc7a85f..9b871f3 100644
--- a/drivers/acpi/namespace/nsalloc.c
+++ b/drivers/acpi/namespace/nsalloc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -272,9 +272,8 @@
/* Grandchildren should have all been deleted already */
if (child_node->child) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Found a grandchild! P=%p C=%p\n",
- parent_node, child_node));
+ ACPI_ERROR((AE_INFO, "Found a grandchild! P=%p C=%p",
+ parent_node, child_node));
}
/* Now we can free this child object */
@@ -302,7 +301,9 @@
/* There should be only one reference remaining on this node */
if (child_node->reference_count != 1) {
- ACPI_REPORT_WARNING(("Existing references (%d) on node being deleted (%p)\n", child_node->reference_count, child_node));
+ ACPI_WARNING((AE_INFO,
+ "Existing references (%d) on node being deleted (%p)",
+ child_node->reference_count, child_node));
}
/* Now we can delete the node */
diff --git a/drivers/acpi/namespace/nsdump.c b/drivers/acpi/namespace/nsdump.c
index 9faf1d5..a280731 100644
--- a/drivers/acpi/namespace/nsdump.c
+++ b/drivers/acpi/namespace/nsdump.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -198,12 +198,13 @@
/* Check the node type and name */
if (type > ACPI_TYPE_LOCAL_MAX) {
- ACPI_REPORT_WARNING(("Invalid ACPI Type %08X\n", type));
+ ACPI_WARNING((AE_INFO, "Invalid ACPI Object Type %08X",
+ type));
}
if (!acpi_ut_valid_acpi_name(this_node->name.integer)) {
- ACPI_REPORT_WARNING(("Invalid ACPI Name %08X\n",
- this_node->name.integer));
+ ACPI_WARNING((AE_INFO, "Invalid ACPI Name %08X",
+ this_node->name.integer));
}
acpi_os_printf("%4.4s", acpi_ut_get_node_name(this_node));
@@ -212,7 +213,9 @@
/*
* Now we can print out the pertinent information
*/
- acpi_os_printf(" %-12s %p ", acpi_ut_get_type_name(type), this_node);
+ acpi_os_printf(" %-12s %p %2.2X ",
+ acpi_ut_get_type_name(type), this_node,
+ this_node->owner_id);
dbg_level = acpi_dbg_level;
acpi_dbg_level = 0;
diff --git a/drivers/acpi/namespace/nsdumpdv.c b/drivers/acpi/namespace/nsdumpdv.c
index 55de883..aff899a 100644
--- a/drivers/acpi/namespace/nsdumpdv.c
+++ b/drivers/acpi/namespace/nsdumpdv.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/namespace/nseval.c b/drivers/acpi/namespace/nseval.c
index 0191c7d..19d7b94 100644
--- a/drivers/acpi/namespace/nseval.c
+++ b/drivers/acpi/namespace/nseval.c
@@ -6,7 +6,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -373,8 +373,7 @@
info->obj_desc = acpi_ns_get_attached_object(info->node);
if (!info->obj_desc) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "No attached method object\n"));
+ ACPI_ERROR((AE_INFO, "No attached method object"));
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(AE_NULL_OBJECT);
diff --git a/drivers/acpi/namespace/nsinit.c b/drivers/acpi/namespace/nsinit.c
index 0a08d2f..9f929e4 100644
--- a/drivers/acpi/namespace/nsinit.c
+++ b/drivers/acpi/namespace/nsinit.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -93,8 +93,7 @@
ACPI_UINT32_MAX, acpi_ns_init_one_object,
&info, NULL);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "walk_namespace failed! %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "During walk_namespace"));
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
@@ -159,12 +158,11 @@
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "walk_namespace failed! %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "During walk_namespace"));
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
- "\n%hd Devices found containing: %hd _STA, %hd _INI methods\n",
+ "\n%hd Devices found - executed %hd _STA, %hd _INI methods\n",
info.device_count, info.num_STA, info.num_INI));
return_ACPI_STATUS(status);
@@ -289,12 +287,10 @@
}
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT_RAW((ACPI_DB_ERROR, "\n"));
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not execute arguments for [%4.4s] (%s), %s\n",
- acpi_ut_get_node_name(node),
- acpi_ut_get_type_name(type),
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not execute arguments for [%4.4s] (%s)",
+ acpi_ut_get_node_name(node),
+ acpi_ut_get_type_name(type)));
}
/*
@@ -336,23 +332,22 @@
struct acpi_parameter_info pinfo;
u32 flags;
acpi_status status;
+ struct acpi_namespace_node *ini_node;
+ struct acpi_namespace_node *device_node;
ACPI_FUNCTION_TRACE("ns_init_one_device");
- pinfo.parameters = NULL;
- pinfo.parameter_type = ACPI_PARAM_ARGS;
-
- pinfo.node = acpi_ns_map_handle_to_node(obj_handle);
- if (!pinfo.node) {
+ device_node = acpi_ns_map_handle_to_node(obj_handle);
+ if (!device_node) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/*
* We will run _STA/_INI on Devices, Processors and thermal_zones only
*/
- if ((pinfo.node->type != ACPI_TYPE_DEVICE) &&
- (pinfo.node->type != ACPI_TYPE_PROCESSOR) &&
- (pinfo.node->type != ACPI_TYPE_THERMAL)) {
+ if ((device_node->type != ACPI_TYPE_DEVICE) &&
+ (device_node->type != ACPI_TYPE_PROCESSOR) &&
+ (device_node->type != ACPI_TYPE_THERMAL)) {
return_ACPI_STATUS(AE_OK);
}
@@ -364,57 +359,69 @@
info->device_count++;
/*
- * Run _STA to determine if we can run _INI on the device.
+ * Check if the _INI method exists for this device -
+ * if _INI does not exist, there is no need to run _STA
+ * No _INI means device requires no initialization
*/
- ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname(ACPI_TYPE_METHOD,
- pinfo.node,
- METHOD_NAME__STA));
- status = acpi_ut_execute_STA(pinfo.node, &flags);
-
+ status = acpi_ns_search_node(*ACPI_CAST_PTR(u32, METHOD_NAME__INI),
+ device_node, ACPI_TYPE_METHOD, &ini_node);
if (ACPI_FAILURE(status)) {
- if (pinfo.node->type == ACPI_TYPE_DEVICE) {
- /* Ignore error and move on to next device */
+ /* No _INI method found - move on to next device */
- return_ACPI_STATUS(AE_OK);
- }
-
- /* _STA is not required for Processor or thermal_zone objects */
- } else {
- info->num_STA++;
-
- if (!(flags & 0x01)) {
- /* Don't look at children of a not present device */
-
- return_ACPI_STATUS(AE_CTRL_DEPTH);
- }
+ return_ACPI_STATUS(AE_OK);
}
/*
- * The device is present. Run _INI.
+ * Run _STA to determine if we can run _INI on the device -
+ * the device must be present before _INI can be run.
+ * However, _STA is not required - assume device present if no _STA
+ */
+ ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname(ACPI_TYPE_METHOD,
+ device_node,
+ METHOD_NAME__STA));
+
+ pinfo.node = device_node;
+ pinfo.parameters = NULL;
+ pinfo.parameter_type = ACPI_PARAM_ARGS;
+
+ status = acpi_ut_execute_STA(pinfo.node, &flags);
+ if (ACPI_FAILURE(status)) {
+ /* Ignore error and move on to next device */
+
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ if (flags != ACPI_UINT32_MAX) {
+ info->num_STA++;
+ }
+
+ if (!(flags & ACPI_STA_DEVICE_PRESENT)) {
+ /* Don't look at children of a not present device */
+
+ return_ACPI_STATUS(AE_CTRL_DEPTH);
+ }
+
+ /*
+ * The device is present and _INI exists. Run the _INI method.
+ * (We already have the _INI node from above)
*/
ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname(ACPI_TYPE_METHOD,
pinfo.node,
METHOD_NAME__INI));
- status = acpi_ns_evaluate_relative(METHOD_NAME__INI, &pinfo);
- if (ACPI_FAILURE(status)) {
- /* No _INI (AE_NOT_FOUND) means device requires no initialization */
- if (status != AE_NOT_FOUND) {
- /* Ignore error and move on to next device */
+ pinfo.node = ini_node;
+ status = acpi_ns_evaluate_by_handle(&pinfo);
+ if (ACPI_FAILURE(status)) {
+ /* Ignore error and move on to next device */
#ifdef ACPI_DEBUG_OUTPUT
- char *scope_name =
- acpi_ns_get_external_pathname(pinfo.node);
+ char *scope_name = acpi_ns_get_external_pathname(ini_node);
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "%s._INI failed: %s\n",
- scope_name,
- acpi_format_exception(status)));
+ ACPI_WARNING((AE_INFO, "%s._INI failed: %s",
+ scope_name, acpi_format_exception(status)));
- ACPI_MEM_FREE(scope_name);
+ ACPI_MEM_FREE(scope_name);
#endif
- }
-
- status = AE_OK;
} else {
/* Delete any return object (especially if implicit_return is enabled) */
@@ -434,5 +441,5 @@
acpi_gbl_init_handler(pinfo.node, ACPI_INIT_DEVICE_INI);
}
- return_ACPI_STATUS(status);
+ return_ACPI_STATUS(AE_OK);
}
diff --git a/drivers/acpi/namespace/nsload.c b/drivers/acpi/namespace/nsload.c
index c28849d..4e0b052 100644
--- a/drivers/acpi/namespace/nsload.c
+++ b/drivers/acpi/namespace/nsload.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -92,7 +92,7 @@
/* Check validity of the AML start and length */
if (!table_desc->aml_start) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null AML pointer\n"));
+ ACPI_ERROR((AE_INFO, "Null AML pointer"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
@@ -102,8 +102,8 @@
/* Ignore table if there is no AML contained within */
if (!table_desc->aml_length) {
- ACPI_REPORT_WARNING(("Zero-length AML block in table [%4.4s]\n",
- table_desc->pointer->signature));
+ ACPI_WARNING((AE_INFO, "Zero-length AML block in table [%4.4s]",
+ table_desc->pointer->signature));
return_ACPI_STATUS(AE_OK);
}
@@ -263,7 +263,7 @@
/* There must be at least a DSDT installed */
if (acpi_gbl_DSDT == NULL) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "DSDT is not in memory\n"));
+ ACPI_ERROR((AE_INFO, "DSDT is not in memory"));
return_ACPI_STATUS(AE_NO_ACPI_TABLES);
}
diff --git a/drivers/acpi/namespace/nsnames.c b/drivers/acpi/namespace/nsnames.c
index d5e8dea..639f653 100644
--- a/drivers/acpi/namespace/nsnames.c
+++ b/drivers/acpi/namespace/nsnames.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -75,7 +75,7 @@
acpi_size index;
struct acpi_namespace_node *parent_node;
- ACPI_FUNCTION_NAME("ns_build_external_path");
+ ACPI_FUNCTION_ENTRY();
/* Special case for root */
@@ -110,9 +110,9 @@
name_buffer[index] = AML_ROOT_PREFIX;
if (index != 0) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not construct pathname; index=%X, size=%X, Path=%s\n",
- (u32) index, (u32) size, &name_buffer[size]));
+ ACPI_ERROR((AE_INFO,
+ "Could not construct pathname; index=%X, size=%X, Path=%s",
+ (u32) index, (u32) size, &name_buffer[size]));
}
return;
@@ -148,7 +148,7 @@
name_buffer = ACPI_MEM_CALLOCATE(size);
if (!name_buffer) {
- ACPI_REPORT_ERROR(("ns_get_table_pathname: allocation failure\n"));
+ ACPI_ERROR((AE_INFO, "Allocation failure"));
return_PTR(NULL);
}
@@ -241,7 +241,7 @@
acpi_ns_build_external_path(node, required_size, buffer->pointer);
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%s [%X] \n",
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%s [%X]\n",
(char *)buffer->pointer, (u32) required_size));
return_ACPI_STATUS(AE_OK);
}
diff --git a/drivers/acpi/namespace/nsobject.c b/drivers/acpi/namespace/nsobject.c
index fc9be94..10ae629 100644
--- a/drivers/acpi/namespace/nsobject.c
+++ b/drivers/acpi/namespace/nsobject.c
@@ -6,7 +6,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -84,22 +84,23 @@
if (!node) {
/* Invalid handle */
- ACPI_REPORT_ERROR(("ns_attach_object: Null named_obj handle\n"));
+ ACPI_ERROR((AE_INFO, "Null named_obj handle"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (!object && (ACPI_TYPE_ANY != type)) {
/* Null object */
- ACPI_REPORT_ERROR(("ns_attach_object: Null object, but type not ACPI_TYPE_ANY\n"));
+ ACPI_ERROR((AE_INFO,
+ "Null object, but type not ACPI_TYPE_ANY"));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (ACPI_GET_DESCRIPTOR_TYPE(node) != ACPI_DESC_TYPE_NAMED) {
/* Not a name handle */
- ACPI_REPORT_ERROR(("ns_attach_object: Invalid handle %p [%s]\n",
- node, acpi_ut_get_descriptor_name(node)));
+ ACPI_ERROR((AE_INFO, "Invalid handle %p [%s]",
+ node, acpi_ut_get_descriptor_name(node)));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
@@ -254,7 +255,7 @@
ACPI_FUNCTION_TRACE_PTR("ns_get_attached_object", node);
if (!node) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Null Node ptr\n"));
+ ACPI_WARNING((AE_INFO, "Null Node ptr"));
return_PTR(NULL);
}
diff --git a/drivers/acpi/namespace/nsparse.c b/drivers/acpi/namespace/nsparse.c
index 433442a..232be43 100644
--- a/drivers/acpi/namespace/nsparse.c
+++ b/drivers/acpi/namespace/nsparse.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/namespace/nssearch.c b/drivers/acpi/namespace/nssearch.c
index 50a3ca5..d64b789 100644
--- a/drivers/acpi/namespace/nssearch.c
+++ b/drivers/acpi/namespace/nssearch.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -99,8 +99,8 @@
if (scope_name) {
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Searching %s (%p) For [%4.4s] (%s)\n",
- scope_name, node,
- (char *)&target_name,
+ scope_name, node, ACPI_CAST_PTR(char,
+ &target_name),
acpi_ut_get_type_name(type)));
ACPI_MEM_FREE(scope_name);
@@ -131,7 +131,7 @@
*/
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Name [%4.4s] (%s) %p found in scope [%4.4s] %p\n",
- (char *)&target_name,
+ ACPI_CAST_PTR(char, &target_name),
acpi_ut_get_type_name(next_node->
type),
next_node,
@@ -160,7 +160,8 @@
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Name [%4.4s] (%s) not found in search in scope [%4.4s] %p first child %p\n",
- (char *)&target_name, acpi_ut_get_type_name(type),
+ ACPI_CAST_PTR(char, &target_name),
+ acpi_ut_get_type_name(type),
acpi_ut_get_node_name(node), node, node->child));
return_ACPI_STATUS(AE_NOT_FOUND);
@@ -210,14 +211,14 @@
*/
if (!parent_node) {
ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "[%4.4s] has no parent\n",
- (char *)&target_name));
+ ACPI_CAST_PTR(char, &target_name)));
return_ACPI_STATUS(AE_NOT_FOUND);
}
if (acpi_ns_local(type)) {
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"[%4.4s] type [%s] must be local to this scope (no parent search)\n",
- (char *)&target_name,
+ ACPI_CAST_PTR(char, &target_name),
acpi_ut_get_type_name(type)));
return_ACPI_STATUS(AE_NOT_FOUND);
}
@@ -227,7 +228,7 @@
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"Searching parent [%4.4s] for [%4.4s]\n",
acpi_ut_get_node_name(parent_node),
- (char *)&target_name));
+ ACPI_CAST_PTR(char, &target_name)));
/*
* Search parents until target is found or we have backed up to the root
@@ -297,18 +298,17 @@
/* Parameter validation */
if (!node || !target_name || !return_node) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Null param: Node %p Name %X return_node %p\n",
- node, target_name, return_node));
-
- ACPI_REPORT_ERROR(("ns_search_and_enter: Null parameter\n"));
+ ACPI_ERROR((AE_INFO,
+ "Null param: Node %p Name %X return_node %p",
+ node, target_name, return_node));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Name must consist of printable characters */
if (!acpi_ut_valid_acpi_name(target_name)) {
- ACPI_REPORT_ERROR(("ns_search_and_enter: Bad character in ACPI Name: %X\n", target_name));
+ ACPI_ERROR((AE_INFO, "Bad character in ACPI Name: %X",
+ target_name));
return_ACPI_STATUS(AE_BAD_CHARACTER);
}
@@ -360,7 +360,7 @@
if (interpreter_mode == ACPI_IMODE_EXECUTE) {
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"%4.4s Not found in %p [Not adding]\n",
- (char *)&target_name, node));
+ ACPI_CAST_PTR(char, &target_name), node));
return_ACPI_STATUS(AE_NOT_FOUND);
}
diff --git a/drivers/acpi/namespace/nsutils.c b/drivers/acpi/namespace/nsutils.c
index ebec036..3e7cad5 100644
--- a/drivers/acpi/namespace/nsutils.c
+++ b/drivers/acpi/namespace/nsutils.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -63,7 +63,6 @@
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * component_id - Caller's component ID (for error output)
* internal_name - Name or path of the namespace node
* lookup_status - Exception code from NS lookup
*
@@ -76,19 +75,17 @@
void
acpi_ns_report_error(char *module_name,
u32 line_number,
- u32 component_id,
char *internal_name, acpi_status lookup_status)
{
acpi_status status;
char *name = NULL;
- acpi_os_printf("%8s-%04d: *** Error: Looking up ",
- module_name, line_number);
+ acpi_ut_report_error(module_name, line_number);
if (lookup_status == AE_BAD_CHARACTER) {
/* There is a non-ascii character in the name */
- acpi_os_printf("[0x%4.4X] (NON-ASCII)\n",
+ acpi_os_printf("[0x%4.4X] (NON-ASCII)",
*(ACPI_CAST_PTR(u32, internal_name)));
} else {
/* Convert path to external format */
@@ -109,7 +106,7 @@
}
}
- acpi_os_printf(" in namespace, %s\n",
+ acpi_os_printf(" Namespace lookup failure, %s\n",
acpi_format_exception(lookup_status));
}
@@ -119,10 +116,9 @@
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * component_id - Caller's component ID (for error output)
* Message - Error message to use on failure
* prefix_node - Prefix relative to the path
- * Path - Path to the node
+ * Path - Path to the node (optional)
* method_status - Execution status
*
* RETURN: None
@@ -134,7 +130,6 @@
void
acpi_ns_report_method_error(char *module_name,
u32 line_number,
- u32 component_id,
char *message,
struct acpi_namespace_node *prefix_node,
char *path, acpi_status method_status)
@@ -142,17 +137,16 @@
acpi_status status;
struct acpi_namespace_node *node = prefix_node;
+ acpi_ut_report_error(module_name, line_number);
+
if (path) {
status = acpi_ns_get_node_by_path(path, prefix_node,
ACPI_NS_NO_UPSEARCH, &node);
if (ACPI_FAILURE(status)) {
- acpi_os_printf
- ("report_method_error: Could not get node\n");
- return;
+ acpi_os_printf("[Could not get node by pathname]");
}
}
- acpi_os_printf("%8s-%04d: *** Error: ", module_name, line_number);
acpi_ns_print_node_pathname(node, message);
acpi_os_printf(", %s\n", acpi_format_exception(method_status));
}
@@ -248,11 +242,11 @@
ACPI_FUNCTION_TRACE("ns_get_type");
if (!node) {
- ACPI_REPORT_WARNING(("ns_get_type: Null Node input pointer\n"));
- return_VALUE(ACPI_TYPE_ANY);
+ ACPI_WARNING((AE_INFO, "Null Node parameter"));
+ return_UINT32(ACPI_TYPE_ANY);
}
- return_VALUE((acpi_object_type) node->type);
+ return_UINT32((acpi_object_type) node->type);
}
/*******************************************************************************
@@ -275,11 +269,11 @@
if (!acpi_ut_valid_object_type(type)) {
/* Type code out of range */
- ACPI_REPORT_WARNING(("ns_local: Invalid Object Type\n"));
- return_VALUE(ACPI_NS_NORMAL);
+ ACPI_WARNING((AE_INFO, "Invalid Object Type %X", type));
+ return_UINT32(ACPI_NS_NORMAL);
}
- return_VALUE((u32) acpi_gbl_ns_properties[type] & ACPI_NS_LOCAL);
+ return_UINT32((u32) acpi_gbl_ns_properties[type] & ACPI_NS_LOCAL);
}
/*******************************************************************************
@@ -627,7 +621,7 @@
* with internal_name (invalid format).
*/
if (required_length > internal_name_length) {
- ACPI_REPORT_ERROR(("ns_externalize_name: Invalid internal name\n"));
+ ACPI_ERROR((AE_INFO, "Invalid internal name"));
return_ACPI_STATUS(AE_BAD_PATHNAME);
}
@@ -803,12 +797,11 @@
if (!acpi_ut_valid_object_type(type)) {
/* type code out of range */
- ACPI_REPORT_WARNING(("ns_opens_scope: Invalid Object Type %X\n",
- type));
- return_VALUE(ACPI_NS_NORMAL);
+ ACPI_WARNING((AE_INFO, "Invalid Object Type %X", type));
+ return_UINT32(ACPI_NS_NORMAL);
}
- return_VALUE(((u32) acpi_gbl_ns_properties[type]) & ACPI_NS_NEWSCOPE);
+ return_UINT32(((u32) acpi_gbl_ns_properties[type]) & ACPI_NS_NEWSCOPE);
}
/*******************************************************************************
diff --git a/drivers/acpi/namespace/nswalk.c b/drivers/acpi/namespace/nswalk.c
index 5f164c0..fcab1e7 100644
--- a/drivers/acpi/namespace/nswalk.c
+++ b/drivers/acpi/namespace/nswalk.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/namespace/nsxfeval.c b/drivers/acpi/namespace/nsxfeval.c
index c07b046..a95f636 100644
--- a/drivers/acpi/namespace/nsxfeval.c
+++ b/drivers/acpi/namespace/nsxfeval.c
@@ -6,7 +6,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -112,8 +112,7 @@
if (return_buffer->length == 0) {
/* Error because caller specifically asked for a return value */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "No return value\n"));
-
+ ACPI_ERROR((AE_INFO, "No return value"));
return_ACPI_STATUS(AE_NULL_OBJECT);
}
@@ -125,11 +124,11 @@
/* Return object type does not match requested type */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Incorrect return type [%s] requested [%s]\n",
- acpi_ut_get_type_name(((union acpi_object *)
- return_buffer->pointer)->type),
- acpi_ut_get_type_name(return_type)));
+ ACPI_ERROR((AE_INFO,
+ "Incorrect return type [%s] requested [%s]",
+ acpi_ut_get_type_name(((union acpi_object *)return_buffer->
+ pointer)->type),
+ acpi_ut_get_type_name(return_type)));
if (must_free) {
/* Caller used ACPI_ALLOCATE_BUFFER, free the return buffer */
@@ -236,11 +235,11 @@
* qualified names above, this is an error
*/
if (!pathname) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Both Handle and Pathname are NULL\n"));
+ ACPI_ERROR((AE_INFO,
+ "Both Handle and Pathname are NULL"));
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Handle is NULL and Pathname is relative\n"));
+ ACPI_ERROR((AE_INFO,
+ "Handle is NULL and Pathname is relative"));
}
status = AE_BAD_PARAMETER;
@@ -399,7 +398,7 @@
/* Parameter validation */
- if ((type > ACPI_TYPE_EXTERNAL_MAX) || (!max_depth) || (!user_function)) {
+ if ((type > ACPI_TYPE_LOCAL_MAX) || (!max_depth) || (!user_function)) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
@@ -473,8 +472,8 @@
return (AE_CTRL_DEPTH);
}
- if (!(flags & 0x01)) {
- /* Don't return at the device or children of the device if not there */
+ if (!(flags & ACPI_STA_DEVICE_PRESENT)) {
+ /* Don't examine children of the device if not present */
return (AE_CTRL_DEPTH);
}
diff --git a/drivers/acpi/namespace/nsxfname.c b/drivers/acpi/namespace/nsxfname.c
index 6b5f8d4..8cd8675 100644
--- a/drivers/acpi/namespace/nsxfname.c
+++ b/drivers/acpi/namespace/nsxfname.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -300,8 +300,7 @@
status = acpi_ut_execute_CID(node, &cid_list);
if (ACPI_SUCCESS(status)) {
- size += ((acpi_size) cid_list->count - 1) *
- sizeof(struct acpi_compatible_id);
+ size += cid_list->size;
info->valid |= ACPI_VALID_CID;
}
diff --git a/drivers/acpi/namespace/nsxfobj.c b/drivers/acpi/namespace/nsxfobj.c
index 0856d42..a033259 100644
--- a/drivers/acpi/namespace/nsxfobj.c
+++ b/drivers/acpi/namespace/nsxfobj.c
@@ -6,7 +6,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 20c9a37..ac5bbae 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -838,7 +838,7 @@
static const int quantum_ms = 1000 / HZ;
ret = down_trylock(sem);
- for (i = timeout; (i > 0 && ret < 0); i -= quantum_ms) {
+ for (i = timeout; (i > 0 && ret != 0); i -= quantum_ms) {
schedule_timeout_interruptible(1);
ret = down_trylock(sem);
}
@@ -1060,13 +1060,11 @@
* Acquire a spinlock.
*
* handle is a pointer to the spinlock_t.
- * flags is *not* the result of save_flags - it is an ACPI-specific flag variable
- * that indicates whether we are at interrupt level.
*/
-unsigned long acpi_os_acquire_lock(acpi_handle handle)
+acpi_cpu_flags acpi_os_acquire_lock(acpi_handle handle)
{
- unsigned long flags;
+ acpi_cpu_flags flags;
spin_lock_irqsave((spinlock_t *) handle, flags);
return flags;
}
@@ -1075,7 +1073,7 @@
* Release a spinlock. See above.
*/
-void acpi_os_release_lock(acpi_handle handle, unsigned long flags)
+void acpi_os_release_lock(acpi_handle handle, acpi_cpu_flags flags)
{
spin_unlock_irqrestore((spinlock_t *) handle, flags);
}
diff --git a/drivers/acpi/parser/psargs.c b/drivers/acpi/parser/psargs.c
index 5858188..de573be 100644
--- a/drivers/acpi/parser/psargs.c
+++ b/drivers/acpi/parser/psargs.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -45,6 +45,7 @@
#include <acpi/acparser.h>
#include <acpi/amlcode.h>
#include <acpi/acnamesp.h>
+#include <acpi/acdispat.h>
#define _COMPONENT ACPI_PARSER
ACPI_MODULE_NAME("psargs")
@@ -62,61 +63,51 @@
*
* PARAMETERS: parser_state - Current parser state object
*
- * RETURN: Decoded package length. On completion, the AML pointer points
+ * RETURN: Decoded package length. On completion, the AML pointer points
* past the length byte or bytes.
*
- * DESCRIPTION: Decode and return a package length field
+ * DESCRIPTION: Decode and return a package length field.
+ * Note: Largest package length is 28 bits, from ACPI specification
*
******************************************************************************/
static u32
acpi_ps_get_next_package_length(struct acpi_parse_state *parser_state)
{
- u32 encoded_length;
- u32 length = 0;
+ u8 *aml = parser_state->aml;
+ u32 package_length = 0;
+ acpi_native_uint byte_count;
+ u8 byte_zero_mask = 0x3F; /* Default [0:5] */
ACPI_FUNCTION_TRACE("ps_get_next_package_length");
- encoded_length = (u32) ACPI_GET8(parser_state->aml);
- parser_state->aml++;
+ /*
+ * Byte 0 bits [6:7] contain the number of additional bytes
+ * used to encode the package length, either 0,1,2, or 3
+ */
+ byte_count = (aml[0] >> 6);
+ parser_state->aml += (byte_count + 1);
- switch (encoded_length >> 6) { /* bits 6-7 contain encoding scheme */
- case 0: /* 1-byte encoding (bits 0-5) */
+ /* Get bytes 3, 2, 1 as needed */
- length = (encoded_length & 0x3F);
- break;
+ while (byte_count) {
+ /*
+ * Final bit positions for the package length bytes:
+ * Byte3->[20:27]
+ * Byte2->[12:19]
+ * Byte1->[04:11]
+ * Byte0->[00:03]
+ */
+ package_length |= (aml[byte_count] << ((byte_count << 3) - 4));
- case 1: /* 2-byte encoding (next byte + bits 0-3) */
-
- length = ((ACPI_GET8(parser_state->aml) << 04) |
- (encoded_length & 0x0F));
- parser_state->aml++;
- break;
-
- case 2: /* 3-byte encoding (next 2 bytes + bits 0-3) */
-
- length = ((ACPI_GET8(parser_state->aml + 1) << 12) |
- (ACPI_GET8(parser_state->aml) << 04) |
- (encoded_length & 0x0F));
- parser_state->aml += 2;
- break;
-
- case 3: /* 4-byte encoding (next 3 bytes + bits 0-3) */
-
- length = ((ACPI_GET8(parser_state->aml + 2) << 20) |
- (ACPI_GET8(parser_state->aml + 1) << 12) |
- (ACPI_GET8(parser_state->aml) << 04) |
- (encoded_length & 0x0F));
- parser_state->aml += 3;
- break;
-
- default:
-
- /* Can't get here, only 2 bits / 4 cases */
- break;
+ byte_zero_mask = 0x0F; /* Use bits [0:3] of byte 0 */
+ byte_count--;
}
- return_VALUE(length);
+ /* Byte 0 is a special case, either bits [0:3] or [0:5] are used */
+
+ package_length |= (aml[0] & byte_zero_mask);
+ return_UINT32(package_length);
}
/*******************************************************************************
@@ -135,16 +126,15 @@
u8 *acpi_ps_get_next_package_end(struct acpi_parse_state *parser_state)
{
u8 *start = parser_state->aml;
- acpi_native_uint length;
+ u32 package_length;
ACPI_FUNCTION_TRACE("ps_get_next_package_end");
- /* Function below changes parser_state->Aml */
+ /* Function below updates parser_state->Aml */
- length =
- (acpi_native_uint) acpi_ps_get_next_package_length(parser_state);
+ package_length = acpi_ps_get_next_package_length(parser_state);
- return_PTR(start + length); /* end of package */
+ return_PTR(start + package_length); /* end of package */
}
/*******************************************************************************
@@ -169,17 +159,15 @@
ACPI_FUNCTION_TRACE("ps_get_next_namestring");
- /* Handle multiple prefix characters */
+ /* Point past any namestring prefix characters (backslash or carat) */
- while (acpi_ps_is_prefix_char(ACPI_GET8(end))) {
- /* Include prefix '\\' or '^' */
-
+ while (acpi_ps_is_prefix_char(*end)) {
end++;
}
- /* Decode the path */
+ /* Decode the path prefix character */
- switch (ACPI_GET8(end)) {
+ switch (*end) {
case 0:
/* null_name */
@@ -199,9 +187,9 @@
case AML_MULTI_NAME_PREFIX_OP:
- /* Multiple name segments, 4 chars each */
+ /* Multiple name segments, 4 chars each, count in next byte */
- end += 2 + ((acpi_size) ACPI_GET8(end + 1) * ACPI_NAME_SIZE);
+ end += 2 + (*(end + 1) * ACPI_NAME_SIZE);
break;
default:
@@ -212,7 +200,7 @@
break;
}
- parser_state->aml = (u8 *) end;
+ parser_state->aml = end;
return_PTR((char *)start);
}
@@ -224,7 +212,7 @@
* Arg - Where the namepath will be stored
* arg_count - If the namepath points to a control method
* the method's argument is returned here.
- * method_call - Whether the namepath can possibly be the
+ * possible_method_call - Whether the namepath can possibly be the
* start of a method call
*
* RETURN: Status
@@ -240,11 +228,11 @@
acpi_status
acpi_ps_get_next_namepath(struct acpi_walk_state *walk_state,
struct acpi_parse_state *parser_state,
- union acpi_parse_object *arg, u8 method_call)
+ union acpi_parse_object *arg, u8 possible_method_call)
{
char *path;
union acpi_parse_object *name_op;
- acpi_status status = AE_OK;
+ acpi_status status;
union acpi_operand_object *method_desc;
struct acpi_namespace_node *node;
union acpi_generic_state scope_info;
@@ -252,115 +240,129 @@
ACPI_FUNCTION_TRACE("ps_get_next_namepath");
path = acpi_ps_get_next_namestring(parser_state);
+ acpi_ps_init_op(arg, AML_INT_NAMEPATH_OP);
- /* Null path case is allowed */
+ /* Null path case is allowed, just exit */
- if (path) {
- /*
- * Lookup the name in the internal namespace
- */
- scope_info.scope.node = NULL;
- node = parser_state->start_node;
- if (node) {
- scope_info.scope.node = node;
- }
+ if (!path) {
+ arg->common.value.name = path;
+ return_ACPI_STATUS(AE_OK);
+ }
- /*
- * Lookup object. We don't want to add anything new to the namespace
- * here, however. So we use MODE_EXECUTE. Allow searching of the
- * parent tree, but don't open a new scope -- we just want to lookup the
- * object (MUST BE mode EXECUTE to perform upsearch)
- */
- status = acpi_ns_lookup(&scope_info, path, ACPI_TYPE_ANY,
- ACPI_IMODE_EXECUTE,
- ACPI_NS_SEARCH_PARENT |
- ACPI_NS_DONT_OPEN_SCOPE, NULL, &node);
- if (ACPI_SUCCESS(status) && method_call) {
- if (node->type == ACPI_TYPE_METHOD) {
- /* This name is actually a control method invocation */
+ /* Setup search scope info */
- method_desc = acpi_ns_get_attached_object(node);
- ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
- "Control Method - %p Desc %p Path=%p\n",
- node, method_desc, path));
-
- name_op = acpi_ps_alloc_op(AML_INT_NAMEPATH_OP);
- if (!name_op) {
- return_ACPI_STATUS(AE_NO_MEMORY);
- }
-
- /* Change arg into a METHOD CALL and attach name to it */
-
- acpi_ps_init_op(arg, AML_INT_METHODCALL_OP);
- name_op->common.value.name = path;
-
- /* Point METHODCALL/NAME to the METHOD Node */
-
- name_op->common.node = node;
- acpi_ps_append_arg(arg, name_op);
-
- if (!method_desc) {
- ACPI_REPORT_ERROR(("ps_get_next_namepath: Control Method %p has no attached object\n", node));
- return_ACPI_STATUS(AE_AML_INTERNAL);
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
- "Control Method - %p Args %X\n",
- node,
- method_desc->method.
- param_count));
-
- /* Get the number of arguments to expect */
-
- walk_state->arg_count =
- method_desc->method.param_count;
- return_ACPI_STATUS(AE_OK);
- }
-
- /*
- * Else this is normal named object reference.
- * Just init the NAMEPATH object with the pathname.
- * (See code below)
- */
- }
-
- if (ACPI_FAILURE(status)) {
- /*
- * 1) Any error other than NOT_FOUND is always severe
- * 2) NOT_FOUND is only important if we are executing a method.
- * 3) If executing a cond_ref_of opcode, NOT_FOUND is ok.
- */
- if ((((walk_state->
- parse_flags & ACPI_PARSE_MODE_MASK) ==
- ACPI_PARSE_EXECUTE) && (status == AE_NOT_FOUND)
- && (walk_state->op->common.aml_opcode !=
- AML_COND_REF_OF_OP))
- || (status != AE_NOT_FOUND)) {
- ACPI_REPORT_NSERROR(path, status);
-
- acpi_os_printf
- ("search_node %p start_node %p return_node %p\n",
- scope_info.scope.node,
- parser_state->start_node, node);
-
- } else {
- /*
- * We got a NOT_FOUND during table load or we encountered
- * a cond_ref_of(x) where the target does not exist.
- * Either case is ok
- */
- status = AE_OK;
- }
- }
+ scope_info.scope.node = NULL;
+ node = parser_state->start_node;
+ if (node) {
+ scope_info.scope.node = node;
}
/*
- * Regardless of success/failure above,
- * Just initialize the Op with the pathname.
+ * Lookup the name in the internal namespace. We don't want to add
+ * anything new to the namespace here, however, so we use MODE_EXECUTE.
+ * Allow searching of the parent tree, but don't open a new scope -
+ * we just want to lookup the object (must be mode EXECUTE to perform
+ * the upsearch)
*/
- acpi_ps_init_op(arg, AML_INT_NAMEPATH_OP);
- arg->common.value.name = path;
+ status =
+ acpi_ns_lookup(&scope_info, path, ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
+ ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE,
+ NULL, &node);
+ /*
+ * If this name is a control method invocation, we must
+ * setup the method call
+ */
+ if (ACPI_SUCCESS(status) &&
+ possible_method_call && (node->type == ACPI_TYPE_METHOD)) {
+ /* This name is actually a control method invocation */
+
+ method_desc = acpi_ns_get_attached_object(node);
+ ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
+ "Control Method - %p Desc %p Path=%p\n", node,
+ method_desc, path));
+
+ name_op = acpi_ps_alloc_op(AML_INT_NAMEPATH_OP);
+ if (!name_op) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ /* Change Arg into a METHOD CALL and attach name to it */
+
+ acpi_ps_init_op(arg, AML_INT_METHODCALL_OP);
+ name_op->common.value.name = path;
+
+ /* Point METHODCALL/NAME to the METHOD Node */
+
+ name_op->common.node = node;
+ acpi_ps_append_arg(arg, name_op);
+
+ if (!method_desc) {
+ ACPI_ERROR((AE_INFO,
+ "Control Method %p has no attached object",
+ node));
+ return_ACPI_STATUS(AE_AML_INTERNAL);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
+ "Control Method - %p Args %X\n",
+ node, method_desc->method.param_count));
+
+ /* Get the number of arguments to expect */
+
+ walk_state->arg_count = method_desc->method.param_count;
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ /*
+ * Special handling if the name was not found during the lookup -
+ * some not_found cases are allowed
+ */
+ if (status == AE_NOT_FOUND) {
+ /* 1) not_found is ok during load pass 1/2 (allow forward references) */
+
+ if ((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) !=
+ ACPI_PARSE_EXECUTE) {
+ status = AE_OK;
+ }
+
+ /* 2) not_found during a cond_ref_of(x) is ok by definition */
+
+ else if (walk_state->op->common.aml_opcode ==
+ AML_COND_REF_OF_OP) {
+ status = AE_OK;
+ }
+
+ /*
+ * 3) not_found while building a Package is ok at this point, we
+ * may flag as an error later if slack mode is not enabled.
+ * (Some ASL code depends on allowing this behavior)
+ */
+ else if ((arg->common.parent) &&
+ ((arg->common.parent->common.aml_opcode ==
+ AML_PACKAGE_OP)
+ || (arg->common.parent->common.aml_opcode ==
+ AML_VAR_PACKAGE_OP))) {
+ status = AE_OK;
+ }
+ }
+
+ /* Final exception check (may have been changed from code above) */
+
+ if (ACPI_FAILURE(status)) {
+ ACPI_ERROR_NAMESPACE(path, status);
+
+ if ((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) ==
+ ACPI_PARSE_EXECUTE) {
+ /* Report a control method execution error */
+
+ status = acpi_ds_method_error(status, walk_state);
+ }
+ }
+
+ /* Save the namepath */
+
+ arg->common.value.name = path;
return_ACPI_STATUS(status);
}
@@ -382,59 +384,63 @@
acpi_ps_get_next_simple_arg(struct acpi_parse_state *parser_state,
u32 arg_type, union acpi_parse_object *arg)
{
+ u32 length;
+ u16 opcode;
+ u8 *aml = parser_state->aml;
ACPI_FUNCTION_TRACE_U32("ps_get_next_simple_arg", arg_type);
switch (arg_type) {
case ARGP_BYTEDATA:
- acpi_ps_init_op(arg, AML_BYTE_OP);
- arg->common.value.integer = (u32) ACPI_GET8(parser_state->aml);
- parser_state->aml++;
+ /* Get 1 byte from the AML stream */
+
+ opcode = AML_BYTE_OP;
+ arg->common.value.integer = (acpi_integer) * aml;
+ length = 1;
break;
case ARGP_WORDDATA:
- acpi_ps_init_op(arg, AML_WORD_OP);
-
/* Get 2 bytes from the AML stream */
- ACPI_MOVE_16_TO_32(&arg->common.value.integer,
- parser_state->aml);
- parser_state->aml += 2;
+ opcode = AML_WORD_OP;
+ ACPI_MOVE_16_TO_64(&arg->common.value.integer, aml);
+ length = 2;
break;
case ARGP_DWORDDATA:
- acpi_ps_init_op(arg, AML_DWORD_OP);
-
/* Get 4 bytes from the AML stream */
- ACPI_MOVE_32_TO_32(&arg->common.value.integer,
- parser_state->aml);
- parser_state->aml += 4;
+ opcode = AML_DWORD_OP;
+ ACPI_MOVE_32_TO_64(&arg->common.value.integer, aml);
+ length = 4;
break;
case ARGP_QWORDDATA:
- acpi_ps_init_op(arg, AML_QWORD_OP);
-
/* Get 8 bytes from the AML stream */
- ACPI_MOVE_64_TO_64(&arg->common.value.integer,
- parser_state->aml);
- parser_state->aml += 8;
+ opcode = AML_QWORD_OP;
+ ACPI_MOVE_64_TO_64(&arg->common.value.integer, aml);
+ length = 8;
break;
case ARGP_CHARLIST:
- acpi_ps_init_op(arg, AML_STRING_OP);
- arg->common.value.string = (char *)parser_state->aml;
+ /* Get a pointer to the string, point past the string */
- while (ACPI_GET8(parser_state->aml) != '\0') {
- parser_state->aml++;
+ opcode = AML_STRING_OP;
+ arg->common.value.string = ACPI_CAST_PTR(char, aml);
+
+ /* Find the null terminator */
+
+ length = 0;
+ while (aml[length]) {
+ length++;
}
- parser_state->aml++;
+ length++;
break;
case ARGP_NAME:
@@ -443,14 +449,16 @@
acpi_ps_init_op(arg, AML_INT_NAMEPATH_OP);
arg->common.value.name =
acpi_ps_get_next_namestring(parser_state);
- break;
+ return_VOID;
default:
- ACPI_REPORT_ERROR(("Invalid arg_type %X\n", arg_type));
- break;
+ ACPI_ERROR((AE_INFO, "Invalid arg_type %X", arg_type));
+ return_VOID;
}
+ acpi_ps_init_op(arg, opcode);
+ parser_state->aml += length;
return_VOID;
}
@@ -540,7 +548,7 @@
* access_type is first operand, access_attribute is second
*/
field->common.value.integer =
- (ACPI_GET8(parser_state->aml) << 8);
+ (((u32) ACPI_GET8(parser_state->aml) << 8));
parser_state->aml++;
field->common.value.integer |= ACPI_GET8(parser_state->aml);
parser_state->aml++;
@@ -703,7 +711,7 @@
default:
- ACPI_REPORT_ERROR(("Invalid arg_type: %X\n", arg_type));
+ ACPI_ERROR((AE_INFO, "Invalid arg_type: %X", arg_type));
status = AE_AML_OPERAND_TYPE;
break;
}
diff --git a/drivers/acpi/parser/psloop.c b/drivers/acpi/parser/psloop.c
index 088d339..00b072e 100644
--- a/drivers/acpi/parser/psloop.c
+++ b/drivers/acpi/parser/psloop.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -123,16 +123,12 @@
&& ((status & AE_CODE_MASK) !=
AE_CODE_CONTROL)) {
if (status == AE_AML_NO_RETURN_VALUE) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invoked method did not return a value, %s\n",
- acpi_format_exception
- (status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Invoked method did not return a value"));
}
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "get_predicate Failed, %s\n",
- acpi_format_exception
- (status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "get_predicate Failed"));
return_ACPI_STATUS(status);
}
@@ -190,11 +186,11 @@
/* The opcode is unrecognized. Just skip unknown opcodes */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Found unknown opcode %X at AML address %p offset %X, ignoring\n",
- walk_state->opcode,
- parser_state->aml,
- walk_state->aml_offset));
+ ACPI_ERROR((AE_INFO,
+ "Found unknown opcode %X at AML address %p offset %X, ignoring",
+ walk_state->opcode,
+ parser_state->aml,
+ walk_state->aml_offset));
ACPI_DUMP_BUFFER(parser_state->aml, 128);
@@ -281,10 +277,8 @@
walk_state->descending_callback(walk_state,
&op);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "During name lookup/catalog, %s\n",
- acpi_format_exception
- (status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "During name lookup/catalog"));
goto close_this_op;
}
@@ -704,6 +698,15 @@
acpi_ps_pop_scope(parser_state, &op,
&walk_state->arg_types,
&walk_state->arg_count);
+
+ if (op->common.aml_opcode != AML_WHILE_OP) {
+ status2 =
+ acpi_ds_result_stack_pop
+ (walk_state);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+ }
}
/* Close this iteration of the While loop */
diff --git a/drivers/acpi/parser/psopcode.c b/drivers/acpi/parser/psopcode.c
index 229ae86..11d6351 100644
--- a/drivers/acpi/parser/psopcode.c
+++ b/drivers/acpi/parser/psopcode.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -747,7 +747,7 @@
/* Unknown AML opcode */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Unknown AML opcode [%4.4X]\n", opcode));
return (&acpi_gbl_aml_op_info[_UNK]);
diff --git a/drivers/acpi/parser/psparse.c b/drivers/acpi/parser/psparse.c
index 76d4d64..a9f3229 100644
--- a/drivers/acpi/parser/psparse.c
+++ b/drivers/acpi/parser/psparse.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -333,7 +333,6 @@
switch (callback_status) {
case AE_CTRL_TERMINATE:
-
/*
* A control method was terminated via a RETURN statement.
* The walk of this method is complete.
@@ -346,13 +345,19 @@
parser_state->aml = walk_state->aml_last_while;
walk_state->control_state->common.value = FALSE;
- status = AE_CTRL_BREAK;
+ status = acpi_ds_result_stack_pop(walk_state);
+ if (ACPI_SUCCESS(status)) {
+ status = AE_CTRL_BREAK;
+ }
break;
case AE_CTRL_CONTINUE:
parser_state->aml = walk_state->aml_last_while;
- status = AE_CTRL_CONTINUE;
+ status = acpi_ds_result_stack_pop(walk_state);
+ if (ACPI_SUCCESS(status)) {
+ status = AE_CTRL_CONTINUE;
+ }
break;
case AE_CTRL_PENDING:
@@ -369,16 +374,18 @@
#endif
case AE_CTRL_TRUE:
-
/*
* Predicate of an IF was true, and we are at the matching ELSE.
* Just close out this package
*/
parser_state->aml = acpi_ps_get_next_package_end(parser_state);
+ status = acpi_ds_result_stack_pop(walk_state);
+ if (ACPI_SUCCESS(status)) {
+ status = AE_CTRL_PENDING;
+ }
break;
case AE_CTRL_FALSE:
-
/*
* Either an IF/WHILE Predicate was false or we encountered a BREAK
* opcode. In both cases, we do not execute the rest of the
@@ -503,22 +510,23 @@
} else if (status == AE_CTRL_TERMINATE) {
status = AE_OK;
} else if ((status != AE_OK) && (walk_state->method_desc)) {
- ACPI_REPORT_METHOD_ERROR("Method execution failed",
- walk_state->method_node, NULL,
- status);
+ /* Either the method parse or actual execution failed */
- /* Ensure proper cleanup */
-
- walk_state->parse_flags |= ACPI_PARSE_EXECUTE;
+ ACPI_ERROR_METHOD("Method parse/execution failed",
+ walk_state->method_node, NULL,
+ status);
/* Check for possible multi-thread reentrancy problem */
if ((status == AE_ALREADY_EXISTS) &&
(!walk_state->method_desc->method.semaphore)) {
/*
- * This method is marked not_serialized, but it tried to create
+ * Method tried to create an object twice. The probable cause is
+ * that the method cannot handle reentrancy.
+ *
+ * The method is marked not_serialized, but it tried to create
* a named object, causing the second thread entrance to fail.
- * We will workaround this by marking the method permanently
+ * Workaround this problem by marking the method permanently
* as Serialized.
*/
walk_state->method_desc->method.method_flags |=
@@ -536,15 +544,23 @@
acpi_ds_scope_stack_clear(walk_state);
/*
- * If we just returned from the execution of a control method,
- * there's lots of cleanup to do
+ * If we just returned from the execution of a control method or if we
+ * encountered an error during the method parse phase, there's lots of
+ * cleanup to do
*/
- if ((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) ==
- ACPI_PARSE_EXECUTE) {
+ if (((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) ==
+ ACPI_PARSE_EXECUTE) || (ACPI_FAILURE(status))) {
if (walk_state->method_desc) {
/* Decrement the thread count on the method parse tree */
- walk_state->method_desc->method.thread_count--;
+ if (walk_state->method_desc->method.
+ thread_count) {
+ walk_state->method_desc->method.
+ thread_count--;
+ } else {
+ ACPI_ERROR((AE_INFO,
+ "Invalid zero thread count in method"));
+ }
}
acpi_ds_terminate_control_method(walk_state);
@@ -553,7 +569,6 @@
/* Delete this walk state and all linked control states */
acpi_ps_cleanup_scope(&walk_state->parser_state);
-
previous_walk_state = walk_state;
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
diff --git a/drivers/acpi/parser/psscope.c b/drivers/acpi/parser/psscope.c
index 1c953b6..bc6047c 100644
--- a/drivers/acpi/parser/psscope.c
+++ b/drivers/acpi/parser/psscope.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/parser/pstree.c b/drivers/acpi/parser/pstree.c
index f0e7558..dd6f167 100644
--- a/drivers/acpi/parser/pstree.c
+++ b/drivers/acpi/parser/pstree.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -132,7 +132,8 @@
if (op_info->class == AML_CLASS_UNKNOWN) {
/* Invalid opcode */
- ACPI_REPORT_ERROR(("ps_append_arg: Invalid AML Opcode: 0x%2.2X\n", op->common.aml_opcode));
+ ACPI_ERROR((AE_INFO, "Invalid AML Opcode: 0x%2.2X",
+ op->common.aml_opcode));
return;
}
diff --git a/drivers/acpi/parser/psutils.c b/drivers/acpi/parser/psutils.c
index 2075efb..3e07cb9 100644
--- a/drivers/acpi/parser/psutils.c
+++ b/drivers/acpi/parser/psutils.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/parser/pswalk.c b/drivers/acpi/parser/pswalk.c
index 08f2321..06f05bf 100644
--- a/drivers/acpi/parser/pswalk.c
+++ b/drivers/acpi/parser/pswalk.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/parser/psxface.c b/drivers/acpi/parser/psxface.c
index 4dcbd44..2dd48cb 100644
--- a/drivers/acpi/parser/psxface.c
+++ b/drivers/acpi/parser/psxface.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -50,6 +50,10 @@
ACPI_MODULE_NAME("psxface")
/* Local Prototypes */
+static void acpi_ps_start_trace(struct acpi_parameter_info *info);
+
+static void acpi_ps_stop_trace(struct acpi_parameter_info *info);
+
static acpi_status acpi_ps_execute_pass(struct acpi_parameter_info *info);
static void
@@ -57,6 +61,136 @@
/*******************************************************************************
*
+ * FUNCTION: acpi_debug_trace
+ *
+ * PARAMETERS: method_name - Valid ACPI name string
+ * debug_level - Optional level mask. 0 to use default
+ * debug_layer - Optional layer mask. 0 to use default
+ * Flags - bit 1: one shot(1) or persistent(0)
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: External interface to enable debug tracing during control
+ * method execution
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_debug_trace(char *name, u32 debug_level, u32 debug_layer, u32 flags)
+{
+ acpi_status status;
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* TBDs: Validate name, allow full path or just nameseg */
+
+ acpi_gbl_trace_method_name = *ACPI_CAST_PTR(u32, name);
+ acpi_gbl_trace_flags = flags;
+
+ if (debug_level) {
+ acpi_gbl_trace_dbg_level = debug_level;
+ }
+ if (debug_layer) {
+ acpi_gbl_trace_dbg_layer = debug_layer;
+ }
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_start_trace
+ *
+ * PARAMETERS: Info - Method info struct
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Start control method execution trace
+ *
+ ******************************************************************************/
+
+static void acpi_ps_start_trace(struct acpi_parameter_info *info)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_ENTRY();
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+ if (ACPI_FAILURE(status)) {
+ return;
+ }
+
+ if ((!acpi_gbl_trace_method_name) ||
+ (acpi_gbl_trace_method_name != info->node->name.integer)) {
+ goto exit;
+ }
+
+ acpi_gbl_original_dbg_level = acpi_dbg_level;
+ acpi_gbl_original_dbg_layer = acpi_dbg_layer;
+
+ acpi_dbg_level = 0x00FFFFFF;
+ acpi_dbg_layer = ACPI_UINT32_MAX;
+
+ if (acpi_gbl_trace_dbg_level) {
+ acpi_dbg_level = acpi_gbl_trace_dbg_level;
+ }
+ if (acpi_gbl_trace_dbg_layer) {
+ acpi_dbg_layer = acpi_gbl_trace_dbg_layer;
+ }
+
+ exit:
+ (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_stop_trace
+ *
+ * PARAMETERS: Info - Method info struct
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Stop control method execution trace
+ *
+ ******************************************************************************/
+
+static void acpi_ps_stop_trace(struct acpi_parameter_info *info)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_ENTRY();
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+ if (ACPI_FAILURE(status)) {
+ return;
+ }
+
+ if ((!acpi_gbl_trace_method_name) ||
+ (acpi_gbl_trace_method_name != info->node->name.integer)) {
+ goto exit;
+ }
+
+ /* Disable further tracing if type is one-shot */
+
+ if (acpi_gbl_trace_flags & 1) {
+ acpi_gbl_trace_method_name = 0;
+ acpi_gbl_trace_dbg_level = 0;
+ acpi_gbl_trace_dbg_layer = 0;
+ }
+
+ acpi_dbg_level = acpi_gbl_original_dbg_level;
+ acpi_dbg_layer = acpi_gbl_original_dbg_layer;
+
+ exit:
+ (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_ps_execute_method
*
* PARAMETERS: Info - Method info block, contains:
@@ -104,6 +238,10 @@
*/
acpi_ps_update_parameter_list(info, REF_INCREMENT);
+ /* Begin tracing if requested */
+
+ acpi_ps_start_trace(info);
+
/*
* 1) Perform the first pass parse of the method to enter any
* named objects that it creates into the namespace
@@ -129,6 +267,10 @@
status = acpi_ps_execute_pass(info);
cleanup:
+ /* End optional tracing */
+
+ acpi_ps_stop_trace(info);
+
/* Take away the extra reference that we gave the parameters above */
acpi_ps_update_parameter_list(info, REF_DECREMENT);
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index e567c03..65aee79 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -258,7 +258,7 @@
static int
acpi_pci_allocate_irq(struct acpi_prt_entry *entry,
- int *edge_level, int *active_high_low, char **link)
+ int *triggering, int *polarity, char **link)
{
int irq;
@@ -266,8 +266,8 @@
if (entry->link.handle) {
irq = acpi_pci_link_allocate_irq(entry->link.handle,
- entry->link.index, edge_level,
- active_high_low, link);
+ entry->link.index, triggering,
+ polarity, link);
if (irq < 0) {
ACPI_DEBUG_PRINT((ACPI_DB_WARN,
"Invalid IRQ link routing entry\n"));
@@ -275,8 +275,8 @@
}
} else {
irq = entry->link.index;
- *edge_level = ACPI_LEVEL_SENSITIVE;
- *active_high_low = ACPI_ACTIVE_LOW;
+ *triggering = ACPI_LEVEL_SENSITIVE;
+ *polarity = ACPI_ACTIVE_LOW;
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found IRQ %d\n", irq));
@@ -285,7 +285,7 @@
static int
acpi_pci_free_irq(struct acpi_prt_entry *entry,
- int *edge_level, int *active_high_low, char **link)
+ int *triggering, int *polarity, char **link)
{
int irq;
@@ -307,8 +307,8 @@
acpi_pci_irq_lookup(struct pci_bus *bus,
int device,
int pin,
- int *edge_level,
- int *active_high_low, char **link, irq_lookup_func func)
+ int *triggering,
+ int *polarity, char **link, irq_lookup_func func)
{
struct acpi_prt_entry *entry = NULL;
int segment = pci_domain_nr(bus);
@@ -327,7 +327,7 @@
return_VALUE(-1);
}
- ret = func(entry, edge_level, active_high_low, link);
+ ret = func(entry, triggering, polarity, link);
return_VALUE(ret);
}
@@ -339,8 +339,8 @@
static int
acpi_pci_irq_derive(struct pci_dev *dev,
int pin,
- int *edge_level,
- int *active_high_low, char **link, irq_lookup_func func)
+ int *triggering,
+ int *polarity, char **link, irq_lookup_func func)
{
struct pci_dev *bridge = dev;
int irq = -1;
@@ -374,7 +374,7 @@
}
irq = acpi_pci_irq_lookup(bridge->bus, PCI_SLOT(bridge->devfn),
- pin, edge_level, active_high_low,
+ pin, triggering, polarity,
link, func);
}
@@ -401,8 +401,8 @@
{
int irq = 0;
u8 pin = 0;
- int edge_level = ACPI_LEVEL_SENSITIVE;
- int active_high_low = ACPI_ACTIVE_LOW;
+ int triggering = ACPI_LEVEL_SENSITIVE;
+ int polarity = ACPI_ACTIVE_LOW;
char *link = NULL;
int rc;
@@ -431,7 +431,7 @@
* values override any BIOS-assigned IRQs set during boot.
*/
irq = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin,
- &edge_level, &active_high_low, &link,
+ &triggering, &polarity, &link,
acpi_pci_allocate_irq);
/*
@@ -439,8 +439,8 @@
* device's parent bridge.
*/
if (irq < 0)
- irq = acpi_pci_irq_derive(dev, pin, &edge_level,
- &active_high_low, &link,
+ irq = acpi_pci_irq_derive(dev, pin, &triggering,
+ &polarity, &link,
acpi_pci_allocate_irq);
/*
@@ -462,7 +462,7 @@
}
}
- rc = acpi_register_gsi(irq, edge_level, active_high_low);
+ rc = acpi_register_gsi(irq, triggering, polarity);
if (rc < 0) {
printk(KERN_WARNING PREFIX "PCI Interrupt %s[%c]: failed "
"to register GSI\n", pci_name(dev), ('A' + pin));
@@ -477,8 +477,8 @@
printk("Link [%s] -> ", link);
printk("GSI %u (%s, %s) -> IRQ %d\n", irq,
- (edge_level == ACPI_LEVEL_SENSITIVE) ? "level" : "edge",
- (active_high_low == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq);
+ (triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge",
+ (polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq);
return_VALUE(0);
}
@@ -494,8 +494,8 @@
{
int gsi = 0;
u8 pin = 0;
- int edge_level = ACPI_LEVEL_SENSITIVE;
- int active_high_low = ACPI_ACTIVE_LOW;
+ int triggering = ACPI_LEVEL_SENSITIVE;
+ int polarity = ACPI_ACTIVE_LOW;
ACPI_FUNCTION_TRACE("acpi_pci_irq_disable");
@@ -511,7 +511,7 @@
* First we check the PCI IRQ routing table (PRT) for an IRQ.
*/
gsi = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin,
- &edge_level, &active_high_low, NULL,
+ &triggering, &polarity, NULL,
acpi_pci_free_irq);
/*
* If no PRT entry was found, we'll try to derive an IRQ from the
@@ -519,7 +519,7 @@
*/
if (gsi < 0)
gsi = acpi_pci_irq_derive(dev, pin,
- &edge_level, &active_high_low, NULL,
+ &triggering, &polarity, NULL,
acpi_pci_free_irq);
if (gsi < 0)
return_VOID;
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 78927c0..07bc6df 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -70,8 +70,8 @@
*/
struct acpi_pci_link_irq {
u8 active; /* Current IRQ */
- u8 edge_level; /* All IRQs */
- u8 active_high_low; /* All IRQs */
+ u8 triggering; /* All IRQs */
+ u8 polarity; /* All IRQs */
u8 resource_type;
u8 possible_count;
u8 possible[ACPI_PCI_LINK_MAX_POSSIBLE];
@@ -108,19 +108,19 @@
ACPI_FUNCTION_TRACE("acpi_pci_link_check_possible");
- switch (resource->id) {
- case ACPI_RSTYPE_START_DPF:
+ switch (resource->type) {
+ case ACPI_RESOURCE_TYPE_START_DEPENDENT:
return_ACPI_STATUS(AE_OK);
- case ACPI_RSTYPE_IRQ:
+ case ACPI_RESOURCE_TYPE_IRQ:
{
struct acpi_resource_irq *p = &resource->data.irq;
- if (!p || !p->number_of_interrupts) {
+ if (!p || !p->interrupt_count) {
ACPI_DEBUG_PRINT((ACPI_DB_WARN,
"Blank IRQ resource\n"));
return_ACPI_STATUS(AE_OK);
}
for (i = 0;
- (i < p->number_of_interrupts
+ (i < p->interrupt_count
&& i < ACPI_PCI_LINK_MAX_POSSIBLE); i++) {
if (!p->interrupts[i]) {
ACPI_DEBUG_PRINT((ACPI_DB_WARN,
@@ -131,22 +131,22 @@
link->irq.possible[i] = p->interrupts[i];
link->irq.possible_count++;
}
- link->irq.edge_level = p->edge_level;
- link->irq.active_high_low = p->active_high_low;
- link->irq.resource_type = ACPI_RSTYPE_IRQ;
+ link->irq.triggering = p->triggering;
+ link->irq.polarity = p->polarity;
+ link->irq.resource_type = ACPI_RESOURCE_TYPE_IRQ;
break;
}
- case ACPI_RSTYPE_EXT_IRQ:
+ case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
{
- struct acpi_resource_ext_irq *p =
+ struct acpi_resource_extended_irq *p =
&resource->data.extended_irq;
- if (!p || !p->number_of_interrupts) {
+ if (!p || !p->interrupt_count) {
ACPI_DEBUG_PRINT((ACPI_DB_WARN,
"Blank EXT IRQ resource\n"));
return_ACPI_STATUS(AE_OK);
}
for (i = 0;
- (i < p->number_of_interrupts
+ (i < p->interrupt_count
&& i < ACPI_PCI_LINK_MAX_POSSIBLE); i++) {
if (!p->interrupts[i]) {
ACPI_DEBUG_PRINT((ACPI_DB_WARN,
@@ -157,9 +157,9 @@
link->irq.possible[i] = p->interrupts[i];
link->irq.possible_count++;
}
- link->irq.edge_level = p->edge_level;
- link->irq.active_high_low = p->active_high_low;
- link->irq.resource_type = ACPI_RSTYPE_EXT_IRQ;
+ link->irq.triggering = p->triggering;
+ link->irq.polarity = p->polarity;
+ link->irq.resource_type = ACPI_RESOURCE_TYPE_EXTENDED_IRQ;
break;
}
default:
@@ -201,11 +201,11 @@
ACPI_FUNCTION_TRACE("acpi_pci_link_check_current");
- switch (resource->id) {
- case ACPI_RSTYPE_IRQ:
+ switch (resource->type) {
+ case ACPI_RESOURCE_TYPE_IRQ:
{
struct acpi_resource_irq *p = &resource->data.irq;
- if (!p || !p->number_of_interrupts) {
+ if (!p || !p->interrupt_count) {
/*
* IRQ descriptors may have no IRQ# bits set,
* particularly those those w/ _STA disabled
@@ -217,11 +217,11 @@
*irq = p->interrupts[0];
break;
}
- case ACPI_RSTYPE_EXT_IRQ:
+ case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
{
- struct acpi_resource_ext_irq *p =
+ struct acpi_resource_extended_irq *p =
&resource->data.extended_irq;
- if (!p || !p->number_of_interrupts) {
+ if (!p || !p->interrupt_count) {
/*
* extended IRQ descriptors must
* return at least 1 IRQ
@@ -233,8 +233,10 @@
*irq = p->interrupts[0];
break;
}
+ break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Resource isn't an IRQ\n"));
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Resource %d isn't an IRQ\n", resource->type));
+ case ACPI_RESOURCE_TYPE_END_TAG:
return_ACPI_STATUS(AE_OK);
}
return_ACPI_STATUS(AE_CTRL_TERMINATE);
@@ -325,36 +327,36 @@
buffer.pointer = resource;
switch (link->irq.resource_type) {
- case ACPI_RSTYPE_IRQ:
- resource->res.id = ACPI_RSTYPE_IRQ;
+ case ACPI_RESOURCE_TYPE_IRQ:
+ resource->res.type = ACPI_RESOURCE_TYPE_IRQ;
resource->res.length = sizeof(struct acpi_resource);
- resource->res.data.irq.edge_level = link->irq.edge_level;
- resource->res.data.irq.active_high_low =
- link->irq.active_high_low;
- if (link->irq.edge_level == ACPI_EDGE_SENSITIVE)
- resource->res.data.irq.shared_exclusive =
+ resource->res.data.irq.triggering = link->irq.triggering;
+ resource->res.data.irq.polarity =
+ link->irq.polarity;
+ if (link->irq.triggering == ACPI_EDGE_SENSITIVE)
+ resource->res.data.irq.sharable =
ACPI_EXCLUSIVE;
else
- resource->res.data.irq.shared_exclusive = ACPI_SHARED;
- resource->res.data.irq.number_of_interrupts = 1;
+ resource->res.data.irq.sharable = ACPI_SHARED;
+ resource->res.data.irq.interrupt_count = 1;
resource->res.data.irq.interrupts[0] = irq;
break;
- case ACPI_RSTYPE_EXT_IRQ:
- resource->res.id = ACPI_RSTYPE_EXT_IRQ;
+ case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+ resource->res.type = ACPI_RESOURCE_TYPE_EXTENDED_IRQ;
resource->res.length = sizeof(struct acpi_resource);
resource->res.data.extended_irq.producer_consumer =
ACPI_CONSUMER;
- resource->res.data.extended_irq.edge_level =
- link->irq.edge_level;
- resource->res.data.extended_irq.active_high_low =
- link->irq.active_high_low;
- if (link->irq.edge_level == ACPI_EDGE_SENSITIVE)
- resource->res.data.irq.shared_exclusive =
+ resource->res.data.extended_irq.triggering =
+ link->irq.triggering;
+ resource->res.data.extended_irq.polarity =
+ link->irq.polarity;
+ if (link->irq.triggering == ACPI_EDGE_SENSITIVE)
+ resource->res.data.irq.sharable =
ACPI_EXCLUSIVE;
else
- resource->res.data.irq.shared_exclusive = ACPI_SHARED;
- resource->res.data.extended_irq.number_of_interrupts = 1;
+ resource->res.data.irq.sharable = ACPI_SHARED;
+ resource->res.data.extended_irq.interrupt_count = 1;
resource->res.data.extended_irq.interrupts[0] = irq;
/* ignore resource_source, it's optional */
break;
@@ -364,7 +366,7 @@
goto end;
}
- resource->end.id = ACPI_RSTYPE_END_TAG;
+ resource->end.type = ACPI_RESOURCE_TYPE_END_TAG;
/* Attempt to set the resource */
status = acpi_set_current_resources(link->handle, &buffer);
@@ -613,7 +615,7 @@
int
acpi_pci_link_allocate_irq(acpi_handle handle,
int index,
- int *edge_level, int *active_high_low, char **name)
+ int *triggering, int *polarity, char **name)
{
int result = 0;
struct acpi_device *device = NULL;
@@ -653,10 +655,10 @@
link->refcnt++;
up(&acpi_link_lock);
- if (edge_level)
- *edge_level = link->irq.edge_level;
- if (active_high_low)
- *active_high_low = link->irq.active_high_low;
+ if (triggering)
+ *triggering = link->irq.triggering;
+ if (polarity)
+ *polarity = link->irq.polarity;
if (name)
*name = acpi_device_bid(link->device);
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 0fd9988..4c313ea 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -122,15 +122,15 @@
int *busnr = (int *)data;
struct acpi_resource_address64 address;
- if (resource->id != ACPI_RSTYPE_ADDRESS16 &&
- resource->id != ACPI_RSTYPE_ADDRESS32 &&
- resource->id != ACPI_RSTYPE_ADDRESS64)
+ if (resource->type != ACPI_RESOURCE_TYPE_ADDRESS16 &&
+ resource->type != ACPI_RESOURCE_TYPE_ADDRESS32 &&
+ resource->type != ACPI_RESOURCE_TYPE_ADDRESS64)
return AE_OK;
acpi_resource_to_address64(resource, &address);
if ((address.address_length > 0) &&
(address.resource_type == ACPI_BUS_NUMBER_RANGE))
- *busnr = address.min_address_range;
+ *busnr = address.minimum;
return AE_OK;
}
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 1278aca..99a3a28 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -253,31 +253,21 @@
* _PDC is required for a BIOS-OS handshake for most of the newer
* ACPI processor features.
*/
-
-int acpi_processor_set_pdc(struct acpi_processor *pr,
- struct acpi_object_list *pdc_in)
+static int acpi_processor_set_pdc(struct acpi_processor *pr)
{
+ struct acpi_object_list *pdc_in = pr->pdc;
acpi_status status = AE_OK;
- u32 arg0_buf[3];
- union acpi_object arg0 = { ACPI_TYPE_BUFFER };
- struct acpi_object_list no_object = { 1, &arg0 };
- struct acpi_object_list *pdc;
ACPI_FUNCTION_TRACE("acpi_processor_set_pdc");
- arg0.buffer.length = 12;
- arg0.buffer.pointer = (u8 *) arg0_buf;
- arg0_buf[0] = ACPI_PDC_REVISION_ID;
- arg0_buf[1] = 0;
- arg0_buf[2] = 0;
+ if (!pdc_in)
+ return_VALUE(status);
- pdc = (pdc_in) ? pdc_in : &no_object;
+ status = acpi_evaluate_object(pr->handle, "_PDC", pdc_in, NULL);
- status = acpi_evaluate_object(pr->handle, "_PDC", pdc, NULL);
-
- if ((ACPI_FAILURE(status)) && (pdc_in))
+ if (ACPI_FAILURE(status))
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Error evaluating _PDC, using legacy perf. control...\n"));
+ "Could not evaluate _PDC, using legacy perf. control...\n"));
return_VALUE(status);
}
@@ -357,7 +347,6 @@
ACPI_PROCESSOR_FILE_THROTTLING));
else {
entry->proc_fops = &acpi_processor_throttling_fops;
- entry->proc_fops->write = acpi_processor_write_throttling;
entry->data = acpi_driver_data(device);
entry->owner = THIS_MODULE;
}
@@ -372,7 +361,6 @@
ACPI_PROCESSOR_FILE_LIMIT));
else {
entry->proc_fops = &acpi_processor_limit_fops;
- entry->proc_fops->write = acpi_processor_write_limit;
entry->data = acpi_driver_data(device);
entry->owner = THIS_MODULE;
}
@@ -589,6 +577,10 @@
"Error installing device notify handler\n"));
}
+ /* _PDC call should be done before doing anything else (if reqd.). */
+ arch_acpi_processor_init_pdc(pr);
+ acpi_processor_set_pdc(pr);
+
acpi_processor_power_init(pr, device);
if (pr->flags.throttling) {
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index cc04933..eb730a8 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -94,23 +94,60 @@
return 0;
}
-static struct dmi_system_id __initdata processor_power_dmi_table[] = {
- {set_max_cstate, "IBM ThinkPad R40e", {
- DMI_MATCH(DMI_BIOS_VENDOR,
- "IBM"),
- DMI_MATCH(DMI_BIOS_VERSION,
- "1SET60WW")},
- (void *)1},
- {set_max_cstate, "Medion 41700", {
- DMI_MATCH(DMI_BIOS_VENDOR,
- "Phoenix Technologies LTD"),
- DMI_MATCH(DMI_BIOS_VERSION,
- "R01-A1J")}, (void *)1},
- {set_max_cstate, "Clevo 5600D", {
- DMI_MATCH(DMI_BIOS_VENDOR,
- "Phoenix Technologies LTD"),
- DMI_MATCH(DMI_BIOS_VERSION,
- "SHE845M0.86C.0013.D.0302131307")},
+/* Actually this shouldn't be __cpuinitdata, would be better to fix the
+ callers to only run once -AK */
+static struct dmi_system_id __cpuinitdata processor_power_dmi_table[] = {
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET60WW")}, (void *)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET43WW") }, (void*)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET45WW") }, (void*)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET47WW") }, (void*)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET50WW") }, (void*)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET52WW") }, (void*)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET55WW") }, (void*)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET56WW") }, (void*)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET59WW") }, (void*)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET60WW") }, (void*)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET61WW") }, (void*)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET62WW") }, (void*)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET64WW") }, (void*)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET65WW") }, (void*)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET68WW") }, (void*)1},
+ { set_max_cstate, "Medion 41700", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION,"R01-A1J")}, (void *)1},
+ { set_max_cstate, "Clevo 5600D", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")},
(void *)2},
{},
};
@@ -550,18 +587,10 @@
if (!pr->pblk)
return_VALUE(-ENODEV);
- memset(pr->power.states, 0, sizeof(pr->power.states));
-
/* if info is obtained from pblk/fadt, type equals state */
- pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
pr->power.states[ACPI_STATE_C2].type = ACPI_STATE_C2;
pr->power.states[ACPI_STATE_C3].type = ACPI_STATE_C3;
- /* the C0 state only exists as a filler in our array,
- * and all processors need to support C1 */
- pr->power.states[ACPI_STATE_C0].valid = 1;
- pr->power.states[ACPI_STATE_C1].valid = 1;
-
#ifndef CONFIG_HOTPLUG_CPU
/*
* Check for P_LVL2_UP flag before entering C2 and above on
@@ -591,12 +620,11 @@
{
ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_default_c1");
+ /* Zero initialize all the C-states info. */
memset(pr->power.states, 0, sizeof(pr->power.states));
- /* if info is obtained from pblk/fadt, type equals state */
+ /* set the first C-State to C1 */
pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
- pr->power.states[ACPI_STATE_C2].type = ACPI_STATE_C2;
- pr->power.states[ACPI_STATE_C3].type = ACPI_STATE_C3;
/* the C0 state only exists as a filler in our array,
* and all processors need to support C1 */
@@ -610,6 +638,7 @@
{
acpi_status status = 0;
acpi_integer count;
+ int current_count;
int i;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *cst;
@@ -619,10 +648,12 @@
if (nocst)
return_VALUE(-ENODEV);
- pr->power.count = 0;
- for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
- memset(&(pr->power.states[i]), 0,
- sizeof(struct acpi_processor_cx));
+ current_count = 1;
+
+ /* Zero initialize C2 onwards and prepare for fresh CST lookup */
+ for (i = 2; i < ACPI_PROCESSOR_MAX_POWER; i++)
+ memset(&(pr->power.states[i]), 0,
+ sizeof(struct acpi_processor_cx));
status = acpi_evaluate_object(pr->handle, "_CST", NULL, &buffer);
if (ACPI_FAILURE(status)) {
@@ -650,16 +681,6 @@
goto end;
}
- /* We support up to ACPI_PROCESSOR_MAX_POWER. */
- if (count > ACPI_PROCESSOR_MAX_POWER) {
- printk(KERN_WARNING
- "Limiting number of power states to max (%d)\n",
- ACPI_PROCESSOR_MAX_POWER);
- printk(KERN_WARNING
- "Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n");
- count = ACPI_PROCESSOR_MAX_POWER;
- }
-
/* Tell driver that at least _CST is supported. */
pr->flags.has_cst = 1;
@@ -703,7 +724,7 @@
(reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO))
continue;
- if ((cx.type < ACPI_STATE_C1) || (cx.type > ACPI_STATE_C3))
+ if ((cx.type < ACPI_STATE_C2) || (cx.type > ACPI_STATE_C3))
continue;
obj = (union acpi_object *)&(element->package.elements[2]);
@@ -718,15 +739,28 @@
cx.power = obj->integer.value;
- (pr->power.count)++;
- memcpy(&(pr->power.states[pr->power.count]), &cx, sizeof(cx));
+ current_count++;
+ memcpy(&(pr->power.states[current_count]), &cx, sizeof(cx));
+
+ /*
+ * We support total ACPI_PROCESSOR_MAX_POWER - 1
+ * (From 1 through ACPI_PROCESSOR_MAX_POWER - 1)
+ */
+ if (current_count >= (ACPI_PROCESSOR_MAX_POWER - 1)) {
+ printk(KERN_WARNING
+ "Limiting number of power states to max (%d)\n",
+ ACPI_PROCESSOR_MAX_POWER);
+ printk(KERN_WARNING
+ "Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n");
+ break;
+ }
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d power states\n",
- pr->power.count));
+ current_count));
/* Validate number of power states discovered */
- if (pr->power.count < 2)
+ if (current_count < 2)
status = -EFAULT;
end:
@@ -867,7 +901,7 @@
case ACPI_STATE_C3:
acpi_processor_power_verify_c3(pr, cx);
#ifdef ARCH_APICTIMER_STOPS_ON_C3
- if (c->x86_vendor == X86_VENDOR_INTEL) {
+ if (cx->valid && c->x86_vendor == X86_VENDOR_INTEL) {
on_each_cpu(switch_APIC_timer_to_ipi,
&mask, 1, 1);
}
@@ -892,12 +926,13 @@
/* NOTE: the idle thread may not be running while calling
* this function */
+ /* Adding C1 state */
+ acpi_processor_get_power_info_default_c1(pr);
result = acpi_processor_get_power_info_cst(pr);
if (result == -ENODEV)
- result = acpi_processor_get_power_info_fadt(pr);
+ acpi_processor_get_power_info_fadt(pr);
- if ((result) || (acpi_processor_power_verify(pr) < 2))
- result = acpi_processor_get_power_info_default_c1(pr);
+ pr->power.count = acpi_processor_power_verify(pr);
/*
* Set Default Policy
@@ -1066,8 +1101,6 @@
}
}
- acpi_processor_power_init_pdc(&(pr->power), pr->id);
- acpi_processor_set_pdc(pr, pr->power.pdc);
acpi_processor_get_power_info(pr);
/*
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 22c7bb6..abbdb37 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -315,8 +315,6 @@
if (!pr || !pr->performance || !pr->handle)
return_VALUE(-EINVAL);
- acpi_processor_set_pdc(pr, pr->performance->pdc);
-
status = acpi_get_handle(pr->handle, "_PCT", &handle);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
@@ -520,8 +518,8 @@
"Unable to create '%s' fs entry\n",
ACPI_PROCESSOR_FILE_PERFORMANCE));
else {
+ acpi_processor_perf_fops.write = acpi_processor_write_performance;
entry->proc_fops = &acpi_processor_perf_fops;
- entry->proc_fops->write = acpi_processor_write_performance;
entry->data = acpi_driver_data(device);
entry->owner = THIS_MODULE;
}
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index dc9817c..f99ad05 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -348,9 +348,9 @@
PDE(inode)->data);
}
-ssize_t acpi_processor_write_limit(struct file * file,
- const char __user * buffer,
- size_t count, loff_t * data)
+static ssize_t acpi_processor_write_limit(struct file * file,
+ const char __user * buffer,
+ size_t count, loff_t * data)
{
int result = 0;
struct seq_file *m = (struct seq_file *)file->private_data;
@@ -394,6 +394,7 @@
struct file_operations acpi_processor_limit_fops = {
.open = acpi_processor_limit_open_fs,
.read = seq_read,
+ .write = acpi_processor_write_limit,
.llseek = seq_lseek,
.release = single_release,
};
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 74a52d4..b966549 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -306,9 +306,9 @@
PDE(inode)->data);
}
-ssize_t acpi_processor_write_throttling(struct file * file,
- const char __user * buffer,
- size_t count, loff_t * data)
+static ssize_t acpi_processor_write_throttling(struct file * file,
+ const char __user * buffer,
+ size_t count, loff_t * data)
{
int result = 0;
struct seq_file *m = (struct seq_file *)file->private_data;
@@ -337,6 +337,7 @@
struct file_operations acpi_processor_throttling_fops = {
.open = acpi_processor_throttling_open_fs,
.read = seq_read,
+ .write = acpi_processor_write_throttling,
.llseek = seq_lseek,
.release = single_release,
};
diff --git a/drivers/acpi/resources/Makefile b/drivers/acpi/resources/Makefile
index 2130b74..8de4f69 100644
--- a/drivers/acpi/resources/Makefile
+++ b/drivers/acpi/resources/Makefile
@@ -2,7 +2,7 @@
# Makefile for all Linux ACPI interpreter subdirectories
#
-obj-y := rsaddr.o rscreate.o rsio.o rslist.o rsmisc.o rsxface.o \
+obj-y := rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
rscalc.o rsirq.o rsmemory.o rsutils.o
obj-$(ACPI_FUTURE_USAGE) += rsdump.o
diff --git a/drivers/acpi/resources/rsaddr.c b/drivers/acpi/resources/rsaddr.c
index 23b54ba..8fa3213 100644
--- a/drivers/acpi/resources/rsaddr.c
+++ b/drivers/acpi/resources/rsaddr.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -47,1072 +47,334 @@
#define _COMPONENT ACPI_RESOURCES
ACPI_MODULE_NAME("rsaddr")
-/* Local prototypes */
-static void
-acpi_rs_decode_general_flags(union acpi_resource_data *resource, u8 flags);
-
-static u8 acpi_rs_encode_general_flags(union acpi_resource_data *resource);
-
-static void
-acpi_rs_decode_specific_flags(union acpi_resource_data *resource, u8 flags);
-
-static u8 acpi_rs_encode_specific_flags(union acpi_resource_data *resource);
-
/*******************************************************************************
*
- * FUNCTION: acpi_rs_decode_general_flags
- *
- * PARAMETERS: Resource - Address resource data struct
- * Flags - Actual flag byte
- *
- * RETURN: Decoded flag bits in resource struct
- *
- * DESCRIPTION: Decode a general flag byte to an address resource struct
+ * acpi_rs_convert_address16 - All WORD (16-bit) address resources
*
******************************************************************************/
+struct acpi_rsconvert_info acpi_rs_convert_address16[5] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_ADDRESS16,
+ ACPI_RS_SIZE(struct acpi_resource_address16),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_address16)},
-static void
-acpi_rs_decode_general_flags(union acpi_resource_data *resource, u8 flags)
-{
- ACPI_FUNCTION_ENTRY();
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_ADDRESS16,
+ sizeof(struct aml_resource_address16),
+ 0},
- /* Producer / Consumer - flag bit[0] */
+ /* Resource Type, General Flags, and Type-Specific Flags */
- resource->address.producer_consumer = (u32) (flags & 0x01);
-
- /* Decode (_DEC) - flag bit[1] */
-
- resource->address.decode = (u32) ((flags >> 1) & 0x01);
-
- /* Min Address Fixed (_MIF) - flag bit[2] */
-
- resource->address.min_address_fixed = (u32) ((flags >> 2) & 0x01);
-
- /* Max Address Fixed (_MAF) - flag bit[3] */
-
- resource->address.max_address_fixed = (u32) ((flags >> 3) & 0x01);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_encode_general_flags
- *
- * PARAMETERS: Resource - Address resource data struct
- *
- * RETURN: Encoded general flag byte
- *
- * DESCRIPTION: Construct a general flag byte from an address resource struct
- *
- ******************************************************************************/
-
-static u8 acpi_rs_encode_general_flags(union acpi_resource_data *resource)
-{
- u8 flags;
-
- ACPI_FUNCTION_ENTRY();
-
- /* Producer / Consumer - flag bit[0] */
-
- flags = (u8) (resource->address.producer_consumer & 0x01);
-
- /* Decode (_DEC) - flag bit[1] */
-
- flags |= (u8) ((resource->address.decode & 0x01) << 1);
-
- /* Min Address Fixed (_MIF) - flag bit[2] */
-
- flags |= (u8) ((resource->address.min_address_fixed & 0x01) << 2);
-
- /* Max Address Fixed (_MAF) - flag bit[3] */
-
- flags |= (u8) ((resource->address.max_address_fixed & 0x01) << 3);
-
- return (flags);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_decode_specific_flags
- *
- * PARAMETERS: Resource - Address resource data struct
- * Flags - Actual flag byte
- *
- * RETURN: Decoded flag bits in attribute struct
- *
- * DESCRIPTION: Decode a type-specific flag byte to an attribute struct.
- * Type-specific flags are only defined for the Memory and IO
- * resource types.
- *
- ******************************************************************************/
-
-static void
-acpi_rs_decode_specific_flags(union acpi_resource_data *resource, u8 flags)
-{
- ACPI_FUNCTION_ENTRY();
-
- if (resource->address.resource_type == ACPI_MEMORY_RANGE) {
- /* Write Status (_RW) - flag bit[0] */
-
- resource->address.attribute.memory.read_write_attribute =
- (u16) (flags & 0x01);
-
- /* Memory Attributes (_MEM) - flag bits[2:1] */
-
- resource->address.attribute.memory.cache_attribute =
- (u16) ((flags >> 1) & 0x03);
- } else if (resource->address.resource_type == ACPI_IO_RANGE) {
- /* Ranges (_RNG) - flag bits[1:0] */
-
- resource->address.attribute.io.range_attribute =
- (u16) (flags & 0x03);
-
- /* Translations (_TTP and _TRS) - flag bits[5:4] */
-
- resource->address.attribute.io.translation_attribute =
- (u16) ((flags >> 4) & 0x03);
- }
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_encode_specific_flags
- *
- * PARAMETERS: Resource - Address resource data struct
- *
- * RETURN: Encoded type-specific flag byte
- *
- * DESCRIPTION: Construct a type-specific flag byte from an attribute struct.
- * Type-specific flags are only defined for the Memory and IO
- * resource types.
- *
- ******************************************************************************/
-
-static u8 acpi_rs_encode_specific_flags(union acpi_resource_data *resource)
-{
- u8 flags = 0;
-
- ACPI_FUNCTION_ENTRY();
-
- if (resource->address.resource_type == ACPI_MEMORY_RANGE) {
- /* Write Status (_RW) - flag bit[0] */
-
- flags = (u8)
- (resource->address.attribute.memory.
- read_write_attribute & 0x01);
-
- /* Memory Attributes (_MEM) - flag bits[2:1] */
-
- flags |= (u8)
- ((resource->address.attribute.memory.
- cache_attribute & 0x03) << 1);
- } else if (resource->address.resource_type == ACPI_IO_RANGE) {
- /* Ranges (_RNG) - flag bits[1:0] */
-
- flags = (u8)
- (resource->address.attribute.io.range_attribute & 0x03);
-
- /* Translations (_TTP and _TRS) - flag bits[5:4] */
-
- flags |= (u8)
- ((resource->address.attribute.io.
- translation_attribute & 0x03) << 4);
- }
-
- return (flags);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_address16_resource
- *
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_rs_address16_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size)
-{
- u32 index;
- u16 temp16;
- u8 temp8;
- u8 *temp_ptr;
- u8 *buffer = byte_stream_buffer;
- struct acpi_resource *output_struct = (void *)*output_buffer;
- acpi_size struct_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_address16);
-
- ACPI_FUNCTION_TRACE("rs_address16_resource");
-
- /* Get the Descriptor Length field */
-
- buffer += 1;
- ACPI_MOVE_16_TO_16(&temp16, buffer);
-
- /* Validate minimum descriptor length */
-
- if (temp16 < 13) {
- return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
- }
-
- *bytes_consumed = temp16 + 3;
- output_struct->id = ACPI_RSTYPE_ADDRESS16;
-
- /* Get the Resource Type (Byte3) */
-
- buffer += 2;
- temp8 = *buffer;
-
- /* Values 0-2 and 0xC0-0xFF are valid */
-
- if ((temp8 > 2) && (temp8 < 0xC0)) {
- return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
- }
-
- output_struct->data.address16.resource_type = temp8;
-
- /* Get the General Flags (Byte4) */
-
- buffer += 1;
- acpi_rs_decode_general_flags(&output_struct->data, *buffer);
-
- /* Get the Type Specific Flags (Byte5) */
-
- buffer += 1;
- acpi_rs_decode_specific_flags(&output_struct->data, *buffer);
-
- /* Get Granularity (Bytes 6-7) */
-
- buffer += 1;
- ACPI_MOVE_16_TO_32(&output_struct->data.address16.granularity, buffer);
-
- /* Get min_address_range (Bytes 8-9) */
-
- buffer += 2;
- ACPI_MOVE_16_TO_32(&output_struct->data.address16.min_address_range,
- buffer);
-
- /* Get max_address_range (Bytes 10-11) */
-
- buffer += 2;
- ACPI_MOVE_16_TO_32(&output_struct->data.address16.max_address_range,
- buffer);
-
- /* Get address_translation_offset (Bytes 12-13) */
-
- buffer += 2;
- ACPI_MOVE_16_TO_32(&output_struct->data.address16.
- address_translation_offset, buffer);
-
- /* Get address_length (Bytes 14-15) */
-
- buffer += 2;
- ACPI_MOVE_16_TO_32(&output_struct->data.address16.address_length,
- buffer);
-
- /* Resource Source Index (if present) */
-
- buffer += 2;
+ {ACPI_RSC_ADDRESS, 0, 0, 0},
/*
- * This will leave us pointing to the Resource Source Index
- * If it is present, then save it off and calculate the
- * pointer to where the null terminated string goes:
- * Each Interrupt takes 32-bits + the 5 bytes of the
- * stream that are default.
- *
- * Note: Some resource descriptors will have an additional null, so
- * we add 1 to the length.
+ * These fields are contiguous in both the source and destination:
+ * Address Granularity
+ * Address Range Minimum
+ * Address Range Maximum
+ * Address Translation Offset
+ * Address Length
*/
- if (*bytes_consumed > (16 + 1)) {
- /* Dereference the Index */
+ {ACPI_RSC_MOVE16, ACPI_RS_OFFSET(data.address16.granularity),
+ AML_OFFSET(address16.granularity),
+ 5},
- output_struct->data.address16.resource_source.index =
- (u32) * buffer;
+ /* Optional resource_source (Index and String) */
- /* Point to the String */
+ {ACPI_RSC_SOURCE, ACPI_RS_OFFSET(data.address16.resource_source),
+ 0,
+ sizeof(struct aml_resource_address16)}
+};
- buffer += 1;
+/*******************************************************************************
+ *
+ * acpi_rs_convert_address32 - All DWORD (32-bit) address resources
+ *
+ ******************************************************************************/
- /* Point the String pointer to the end of this structure */
+struct acpi_rsconvert_info acpi_rs_convert_address32[5] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_ADDRESS32,
+ ACPI_RS_SIZE(struct acpi_resource_address32),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_address32)},
- output_struct->data.address16.resource_source.string_ptr =
- (char *)((u8 *) output_struct + struct_size);
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_ADDRESS32,
+ sizeof(struct aml_resource_address32),
+ 0},
- temp_ptr = (u8 *)
- output_struct->data.address16.resource_source.string_ptr;
+ /* Resource Type, General Flags, and Type-Specific Flags */
- /* Copy the resource_source string into the buffer */
+ {ACPI_RSC_ADDRESS, 0, 0, 0},
- index = 0;
- while (*buffer) {
- *temp_ptr = *buffer;
+ /*
+ * These fields are contiguous in both the source and destination:
+ * Address Granularity
+ * Address Range Minimum
+ * Address Range Maximum
+ * Address Translation Offset
+ * Address Length
+ */
+ {ACPI_RSC_MOVE32, ACPI_RS_OFFSET(data.address32.granularity),
+ AML_OFFSET(address32.granularity),
+ 5},
- temp_ptr++;
- buffer++;
- index++;
- }
+ /* Optional resource_source (Index and String) */
- /* Add the terminating null and set the string length */
+ {ACPI_RSC_SOURCE, ACPI_RS_OFFSET(data.address32.resource_source),
+ 0,
+ sizeof(struct aml_resource_address32)}
+};
- *temp_ptr = 0;
- output_struct->data.address16.resource_source.string_length =
- index + 1;
+/*******************************************************************************
+ *
+ * acpi_rs_convert_address64 - All QWORD (64-bit) address resources
+ *
+ ******************************************************************************/
- /*
- * In order for the struct_size to fall on a 32-bit boundary,
- * calculate the length of the string and expand the
- * struct_size to the next 32-bit boundary.
- */
- temp8 = (u8) (index + 1);
- struct_size += ACPI_ROUND_UP_to_32_bITS(temp8);
+struct acpi_rsconvert_info acpi_rs_convert_address64[5] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_ADDRESS64,
+ ACPI_RS_SIZE(struct acpi_resource_address64),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_address64)},
+
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_ADDRESS64,
+ sizeof(struct aml_resource_address64),
+ 0},
+
+ /* Resource Type, General Flags, and Type-Specific Flags */
+
+ {ACPI_RSC_ADDRESS, 0, 0, 0},
+
+ /*
+ * These fields are contiguous in both the source and destination:
+ * Address Granularity
+ * Address Range Minimum
+ * Address Range Maximum
+ * Address Translation Offset
+ * Address Length
+ */
+ {ACPI_RSC_MOVE64, ACPI_RS_OFFSET(data.address64.granularity),
+ AML_OFFSET(address64.granularity),
+ 5},
+
+ /* Optional resource_source (Index and String) */
+
+ {ACPI_RSC_SOURCE, ACPI_RS_OFFSET(data.address64.resource_source),
+ 0,
+ sizeof(struct aml_resource_address64)}
+};
+
+/*******************************************************************************
+ *
+ * acpi_rs_convert_ext_address64 - All Extended (64-bit) address resources
+ *
+ ******************************************************************************/
+
+struct acpi_rsconvert_info acpi_rs_convert_ext_address64[5] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64,
+ ACPI_RS_SIZE(struct acpi_resource_extended_address64),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_ext_address64)},
+
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_EXTENDED_ADDRESS64,
+ sizeof(struct aml_resource_extended_address64),
+ 0},
+
+ /* Resource Type, General Flags, and Type-Specific Flags */
+
+ {ACPI_RSC_ADDRESS, 0, 0, 0},
+
+ /* Revision ID */
+
+ {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.ext_address64.revision_iD),
+ AML_OFFSET(ext_address64.revision_iD),
+ 1},
+ /*
+ * These fields are contiguous in both the source and destination:
+ * Address Granularity
+ * Address Range Minimum
+ * Address Range Maximum
+ * Address Translation Offset
+ * Address Length
+ * Type-Specific Attribute
+ */
+ {ACPI_RSC_MOVE64, ACPI_RS_OFFSET(data.ext_address64.granularity),
+ AML_OFFSET(ext_address64.granularity),
+ 6}
+};
+
+/*******************************************************************************
+ *
+ * acpi_rs_convert_general_flags - Flags common to all address descriptors
+ *
+ ******************************************************************************/
+
+static struct acpi_rsconvert_info acpi_rs_convert_general_flags[6] = {
+ {ACPI_RSC_FLAGINIT, 0, AML_OFFSET(address.flags),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_general_flags)},
+
+ /* Resource Type (Memory, Io, bus_number, etc.) */
+
+ {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.address.resource_type),
+ AML_OFFSET(address.resource_type),
+ 1},
+
+ /* General Flags - Consume, Decode, min_fixed, max_fixed */
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.address.producer_consumer),
+ AML_OFFSET(address.flags),
+ 0},
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.address.decode),
+ AML_OFFSET(address.flags),
+ 1},
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.address.min_address_fixed),
+ AML_OFFSET(address.flags),
+ 2},
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.address.max_address_fixed),
+ AML_OFFSET(address.flags),
+ 3}
+};
+
+/*******************************************************************************
+ *
+ * acpi_rs_convert_mem_flags - Flags common to Memory address descriptors
+ *
+ ******************************************************************************/
+
+static struct acpi_rsconvert_info acpi_rs_convert_mem_flags[5] = {
+ {ACPI_RSC_FLAGINIT, 0, AML_OFFSET(address.specific_flags),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_mem_flags)},
+
+ /* Memory-specific flags */
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.address.info.mem.write_protect),
+ AML_OFFSET(address.specific_flags),
+ 0},
+
+ {ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.address.info.mem.caching),
+ AML_OFFSET(address.specific_flags),
+ 1},
+
+ {ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.address.info.mem.range_type),
+ AML_OFFSET(address.specific_flags),
+ 3},
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.address.info.mem.translation),
+ AML_OFFSET(address.specific_flags),
+ 5}
+};
+
+/*******************************************************************************
+ *
+ * acpi_rs_convert_io_flags - Flags common to I/O address descriptors
+ *
+ ******************************************************************************/
+
+static struct acpi_rsconvert_info acpi_rs_convert_io_flags[4] = {
+ {ACPI_RSC_FLAGINIT, 0, AML_OFFSET(address.specific_flags),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_io_flags)},
+
+ /* I/O-specific flags */
+
+ {ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.address.info.io.range_type),
+ AML_OFFSET(address.specific_flags),
+ 0},
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.address.info.io.translation),
+ AML_OFFSET(address.specific_flags),
+ 4},
+
+ {ACPI_RSC_1BITFLAG,
+ ACPI_RS_OFFSET(data.address.info.io.translation_type),
+ AML_OFFSET(address.specific_flags),
+ 5}
+};
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_get_address_common
+ *
+ * PARAMETERS: Resource - Pointer to the internal resource struct
+ * Aml - Pointer to the AML resource descriptor
+ *
+ * RETURN: TRUE if the resource_type field is OK, FALSE otherwise
+ *
+ * DESCRIPTION: Convert common flag fields from a raw AML resource descriptor
+ * to an internal resource descriptor
+ *
+ ******************************************************************************/
+
+u8
+acpi_rs_get_address_common(struct acpi_resource *resource,
+ union aml_resource *aml)
+{
+ ACPI_FUNCTION_ENTRY();
+
+ /* Validate the Resource Type */
+
+ if ((aml->address.resource_type > 2)
+ && (aml->address.resource_type < 0xC0)) {
+ return (FALSE);
+ }
+
+ /* Get the Resource Type and General Flags */
+
+ (void)acpi_rs_convert_aml_to_resource(resource, aml,
+ acpi_rs_convert_general_flags);
+
+ /* Get the Type-Specific Flags (Memory and I/O descriptors only) */
+
+ if (resource->data.address.resource_type == ACPI_MEMORY_RANGE) {
+ (void)acpi_rs_convert_aml_to_resource(resource, aml,
+ acpi_rs_convert_mem_flags);
+ } else if (resource->data.address.resource_type == ACPI_IO_RANGE) {
+ (void)acpi_rs_convert_aml_to_resource(resource, aml,
+ acpi_rs_convert_io_flags);
} else {
- output_struct->data.address16.resource_source.index = 0;
- output_struct->data.address16.resource_source.string_length = 0;
- output_struct->data.address16.resource_source.string_ptr = NULL;
+ /* Generic resource type, just grab the type_specific byte */
+
+ resource->data.address.info.type_specific =
+ aml->address.specific_flags;
}
- /* Set the Length parameter */
-
- output_struct->length = (u32) struct_size;
-
- /* Return the final size of the structure */
-
- *structure_size = struct_size;
- return_ACPI_STATUS(AE_OK);
+ return (TRUE);
}
/*******************************************************************************
*
- * FUNCTION: acpi_rs_address16_stream
+ * FUNCTION: acpi_rs_set_address_common
*
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - Pointer to where the number of bytes
- * used in the output_buffer is returned
+ * PARAMETERS: Aml - Pointer to the AML resource descriptor
+ * Resource - Pointer to the internal resource struct
*
- * RETURN: Status
+ * RETURN: None
*
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
+ * DESCRIPTION: Convert common flag fields from a resource descriptor to an
+ * AML descriptor
*
******************************************************************************/
-acpi_status
-acpi_rs_address16_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
+void
+acpi_rs_set_address_common(union aml_resource *aml,
+ struct acpi_resource *resource)
{
- u8 *buffer = *output_buffer;
- u8 *length_field;
- acpi_size actual_bytes;
+ ACPI_FUNCTION_ENTRY();
- ACPI_FUNCTION_TRACE("rs_address16_stream");
+ /* Set the Resource Type and General Flags */
- /* Set the Descriptor Type field */
+ (void)acpi_rs_convert_resource_to_aml(resource, aml,
+ acpi_rs_convert_general_flags);
- *buffer = ACPI_RDESC_TYPE_WORD_ADDRESS_SPACE;
- buffer += 1;
+ /* Set the Type-Specific Flags (Memory and I/O descriptors only) */
- /* Save a pointer to the Length field - to be filled in later */
-
- length_field = buffer;
- buffer += 2;
-
- /* Set the Resource Type (Memory, Io, bus_number) */
-
- *buffer = (u8) (linked_list->data.address16.resource_type & 0x03);
- buffer += 1;
-
- /* Set the general flags */
-
- *buffer = acpi_rs_encode_general_flags(&linked_list->data);
- buffer += 1;
-
- /* Set the type specific flags */
-
- *buffer = acpi_rs_encode_specific_flags(&linked_list->data);
- buffer += 1;
-
- /* Set the address space granularity */
-
- ACPI_MOVE_32_TO_16(buffer, &linked_list->data.address16.granularity);
- buffer += 2;
-
- /* Set the address range minimum */
-
- ACPI_MOVE_32_TO_16(buffer,
- &linked_list->data.address16.min_address_range);
- buffer += 2;
-
- /* Set the address range maximum */
-
- ACPI_MOVE_32_TO_16(buffer,
- &linked_list->data.address16.max_address_range);
- buffer += 2;
-
- /* Set the address translation offset */
-
- ACPI_MOVE_32_TO_16(buffer,
- &linked_list->data.address16.
- address_translation_offset);
- buffer += 2;
-
- /* Set the address length */
-
- ACPI_MOVE_32_TO_16(buffer, &linked_list->data.address16.address_length);
- buffer += 2;
-
- /* Resource Source Index and Resource Source are optional */
-
- if (linked_list->data.address16.resource_source.string_length) {
- *buffer =
- (u8) linked_list->data.address16.resource_source.index;
- buffer += 1;
-
- /* Copy the resource_source string */
-
- ACPI_STRCPY((char *)buffer,
- linked_list->data.address16.resource_source.
- string_ptr);
-
- /*
- * Buffer needs to be set to the length of the string + one for the
- * terminating null
- */
- buffer +=
- (acpi_size) (ACPI_STRLEN
- (linked_list->data.address16.resource_source.
- string_ptr) + 1);
- }
-
- /* Return the number of bytes consumed in this operation */
-
- actual_bytes = ACPI_PTR_DIFF(buffer, *output_buffer);
- *bytes_consumed = actual_bytes;
-
- /*
- * Set the length field to the number of bytes consumed
- * minus the header size (3 bytes)
- */
- actual_bytes -= 3;
- ACPI_MOVE_SIZE_TO_16(length_field, &actual_bytes);
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_address32_resource
- *
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_rs_address32_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size)
-{
- u16 temp16;
- u8 temp8;
- u8 *temp_ptr;
- u32 index;
- u8 *buffer = byte_stream_buffer;
- struct acpi_resource *output_struct = (void *)*output_buffer;
- acpi_size struct_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_address32);
-
- ACPI_FUNCTION_TRACE("rs_address32_resource");
-
- /* Get the Descriptor Length field */
-
- buffer += 1;
- ACPI_MOVE_16_TO_16(&temp16, buffer);
-
- /* Validate minimum descriptor length */
-
- if (temp16 < 23) {
- return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
- }
-
- *bytes_consumed = temp16 + 3;
- output_struct->id = ACPI_RSTYPE_ADDRESS32;
-
- /* Get the Resource Type (Byte3) */
-
- buffer += 2;
- temp8 = *buffer;
-
- /* Values 0-2 and 0xC0-0xFF are valid */
-
- if ((temp8 > 2) && (temp8 < 0xC0)) {
- return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
- }
-
- output_struct->data.address32.resource_type = temp8;
-
- /* Get the General Flags (Byte4) */
-
- buffer += 1;
- acpi_rs_decode_general_flags(&output_struct->data, *buffer);
-
- /* Get the Type Specific Flags (Byte5) */
-
- buffer += 1;
- acpi_rs_decode_specific_flags(&output_struct->data, *buffer);
-
- /* Get Granularity (Bytes 6-9) */
-
- buffer += 1;
- ACPI_MOVE_32_TO_32(&output_struct->data.address32.granularity, buffer);
-
- /* Get min_address_range (Bytes 10-13) */
-
- buffer += 4;
- ACPI_MOVE_32_TO_32(&output_struct->data.address32.min_address_range,
- buffer);
-
- /* Get max_address_range (Bytes 14-17) */
-
- buffer += 4;
- ACPI_MOVE_32_TO_32(&output_struct->data.address32.max_address_range,
- buffer);
-
- /* Get address_translation_offset (Bytes 18-21) */
-
- buffer += 4;
- ACPI_MOVE_32_TO_32(&output_struct->data.address32.
- address_translation_offset, buffer);
-
- /* Get address_length (Bytes 22-25) */
-
- buffer += 4;
- ACPI_MOVE_32_TO_32(&output_struct->data.address32.address_length,
- buffer);
-
- /* Resource Source Index (if present) */
-
- buffer += 4;
-
- /*
- * This will leave us pointing to the Resource Source Index
- * If it is present, then save it off and calculate the
- * pointer to where the null terminated string goes:
- *
- * Note: Some resource descriptors will have an additional null, so
- * we add 1 to the length.
- */
- if (*bytes_consumed > (26 + 1)) {
- /* Dereference the Index */
-
- output_struct->data.address32.resource_source.index =
- (u32) * buffer;
-
- /* Point to the String */
-
- buffer += 1;
-
- /* Point the String pointer to the end of this structure */
-
- output_struct->data.address32.resource_source.string_ptr =
- (char *)((u8 *) output_struct + struct_size);
-
- temp_ptr = (u8 *)
- output_struct->data.address32.resource_source.string_ptr;
-
- /* Copy the resource_source string into the buffer */
-
- index = 0;
- while (*buffer) {
- *temp_ptr = *buffer;
-
- temp_ptr++;
- buffer++;
- index++;
- }
-
- /* Add the terminating null and set the string length */
-
- *temp_ptr = 0;
- output_struct->data.address32.resource_source.string_length =
- index + 1;
-
- /*
- * In order for the struct_size to fall on a 32-bit boundary,
- * calculate the length of the string and expand the
- * struct_size to the next 32-bit boundary.
- */
- temp8 = (u8) (index + 1);
- struct_size += ACPI_ROUND_UP_to_32_bITS(temp8);
+ if (resource->data.address.resource_type == ACPI_MEMORY_RANGE) {
+ (void)acpi_rs_convert_resource_to_aml(resource, aml,
+ acpi_rs_convert_mem_flags);
+ } else if (resource->data.address.resource_type == ACPI_IO_RANGE) {
+ (void)acpi_rs_convert_resource_to_aml(resource, aml,
+ acpi_rs_convert_io_flags);
} else {
- output_struct->data.address32.resource_source.index = 0;
- output_struct->data.address32.resource_source.string_length = 0;
- output_struct->data.address32.resource_source.string_ptr = NULL;
+ /* Generic resource type, just copy the type_specific byte */
+
+ aml->address.specific_flags =
+ resource->data.address.info.type_specific;
}
-
- /* Set the Length parameter */
-
- output_struct->length = (u32) struct_size;
-
- /* Return the final size of the structure */
-
- *structure_size = struct_size;
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_address32_stream
- *
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - Pointer to where the number of bytes
- * used in the output_buffer is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
- *
- ******************************************************************************/
-
-acpi_status
-acpi_rs_address32_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
-{
- u8 *buffer;
- u16 *length_field;
-
- ACPI_FUNCTION_TRACE("rs_address32_stream");
-
- buffer = *output_buffer;
-
- /* Set the Descriptor Type field */
-
- *buffer = ACPI_RDESC_TYPE_DWORD_ADDRESS_SPACE;
- buffer += 1;
-
- /* Save a pointer to the Length field - to be filled in later */
-
- length_field = ACPI_CAST_PTR(u16, buffer);
- buffer += 2;
-
- /* Set the Resource Type (Memory, Io, bus_number) */
-
- *buffer = (u8) (linked_list->data.address32.resource_type & 0x03);
- buffer += 1;
-
- /* Set the general flags */
-
- *buffer = acpi_rs_encode_general_flags(&linked_list->data);
- buffer += 1;
-
- /* Set the type specific flags */
-
- *buffer = acpi_rs_encode_specific_flags(&linked_list->data);
- buffer += 1;
-
- /* Set the address space granularity */
-
- ACPI_MOVE_32_TO_32(buffer, &linked_list->data.address32.granularity);
- buffer += 4;
-
- /* Set the address range minimum */
-
- ACPI_MOVE_32_TO_32(buffer,
- &linked_list->data.address32.min_address_range);
- buffer += 4;
-
- /* Set the address range maximum */
-
- ACPI_MOVE_32_TO_32(buffer,
- &linked_list->data.address32.max_address_range);
- buffer += 4;
-
- /* Set the address translation offset */
-
- ACPI_MOVE_32_TO_32(buffer,
- &linked_list->data.address32.
- address_translation_offset);
- buffer += 4;
-
- /* Set the address length */
-
- ACPI_MOVE_32_TO_32(buffer, &linked_list->data.address32.address_length);
- buffer += 4;
-
- /* Resource Source Index and Resource Source are optional */
-
- if (linked_list->data.address32.resource_source.string_length) {
- *buffer =
- (u8) linked_list->data.address32.resource_source.index;
- buffer += 1;
-
- /* Copy the resource_source string */
-
- ACPI_STRCPY((char *)buffer,
- linked_list->data.address32.resource_source.
- string_ptr);
-
- /*
- * Buffer needs to be set to the length of the string + one for the
- * terminating null
- */
- buffer +=
- (acpi_size) (ACPI_STRLEN
- (linked_list->data.address32.resource_source.
- string_ptr) + 1);
- }
-
- /* Return the number of bytes consumed in this operation */
-
- *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
-
- /*
- * Set the length field to the number of bytes consumed
- * minus the header size (3 bytes)
- */
- *length_field = (u16) (*bytes_consumed - 3);
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_address64_resource
- *
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_rs_address64_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size)
-{
- u16 temp16;
- u8 temp8;
- u8 resource_type;
- u8 *temp_ptr;
- u32 index;
- u8 *buffer = byte_stream_buffer;
- struct acpi_resource *output_struct = (void *)*output_buffer;
- acpi_size struct_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_address64);
-
- ACPI_FUNCTION_TRACE("rs_address64_resource");
-
- /* Get the Descriptor Type */
-
- resource_type = *buffer;
-
- /* Get the Descriptor Length field */
-
- buffer += 1;
- ACPI_MOVE_16_TO_16(&temp16, buffer);
-
- /* Validate minimum descriptor length */
-
- if (temp16 < 43) {
- return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
- }
-
- *bytes_consumed = temp16 + 3;
- output_struct->id = ACPI_RSTYPE_ADDRESS64;
-
- /* Get the Resource Type (Byte3) */
-
- buffer += 2;
- temp8 = *buffer;
-
- /* Values 0-2 and 0xC0-0xFF are valid */
-
- if ((temp8 > 2) && (temp8 < 0xC0)) {
- return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
- }
-
- output_struct->data.address64.resource_type = temp8;
-
- /* Get the General Flags (Byte4) */
-
- buffer += 1;
- acpi_rs_decode_general_flags(&output_struct->data, *buffer);
-
- /* Get the Type Specific Flags (Byte5) */
-
- buffer += 1;
- acpi_rs_decode_specific_flags(&output_struct->data, *buffer);
-
- if (resource_type == ACPI_RDESC_TYPE_EXTENDED_ADDRESS_SPACE) {
- /* Move past revision_id and Reserved byte */
-
- buffer += 2;
- }
-
- /* Get Granularity (Bytes 6-13) or (Bytes 8-15) */
-
- buffer += 1;
- ACPI_MOVE_64_TO_64(&output_struct->data.address64.granularity, buffer);
-
- /* Get min_address_range (Bytes 14-21) or (Bytes 16-23) */
-
- buffer += 8;
- ACPI_MOVE_64_TO_64(&output_struct->data.address64.min_address_range,
- buffer);
-
- /* Get max_address_range (Bytes 22-29) or (Bytes 24-31) */
-
- buffer += 8;
- ACPI_MOVE_64_TO_64(&output_struct->data.address64.max_address_range,
- buffer);
-
- /* Get address_translation_offset (Bytes 30-37) or (Bytes 32-39) */
-
- buffer += 8;
- ACPI_MOVE_64_TO_64(&output_struct->data.address64.
- address_translation_offset, buffer);
-
- /* Get address_length (Bytes 38-45) or (Bytes 40-47) */
-
- buffer += 8;
- ACPI_MOVE_64_TO_64(&output_struct->data.address64.address_length,
- buffer);
-
- output_struct->data.address64.resource_source.index = 0;
- output_struct->data.address64.resource_source.string_length = 0;
- output_struct->data.address64.resource_source.string_ptr = NULL;
-
- if (resource_type == ACPI_RDESC_TYPE_EXTENDED_ADDRESS_SPACE) {
- /* Get type_specific_attribute (Bytes 48-55) */
-
- buffer += 8;
- ACPI_MOVE_64_TO_64(&output_struct->data.address64.
- type_specific_attributes, buffer);
- } else {
- output_struct->data.address64.type_specific_attributes = 0;
-
- /* Resource Source Index (if present) */
-
- buffer += 8;
-
- /*
- * This will leave us pointing to the Resource Source Index
- * If it is present, then save it off and calculate the
- * pointer to where the null terminated string goes:
- * Each Interrupt takes 32-bits + the 5 bytes of the
- * stream that are default.
- *
- * Note: Some resource descriptors will have an additional null, so
- * we add 1 to the length.
- */
- if (*bytes_consumed > (46 + 1)) {
- /* Dereference the Index */
-
- output_struct->data.address64.resource_source.index =
- (u32) * buffer;
-
- /* Point to the String */
-
- buffer += 1;
-
- /* Point the String pointer to the end of this structure */
-
- output_struct->data.address64.resource_source.
- string_ptr =
- (char *)((u8 *) output_struct + struct_size);
-
- temp_ptr = (u8 *)
- output_struct->data.address64.resource_source.
- string_ptr;
-
- /* Copy the resource_source string into the buffer */
-
- index = 0;
- while (*buffer) {
- *temp_ptr = *buffer;
-
- temp_ptr++;
- buffer++;
- index++;
- }
-
- /*
- * Add the terminating null and set the string length
- */
- *temp_ptr = 0;
- output_struct->data.address64.resource_source.
- string_length = index + 1;
-
- /*
- * In order for the struct_size to fall on a 32-bit boundary,
- * calculate the length of the string and expand the
- * struct_size to the next 32-bit boundary.
- */
- temp8 = (u8) (index + 1);
- struct_size += ACPI_ROUND_UP_to_32_bITS(temp8);
- }
- }
-
- /* Set the Length parameter */
-
- output_struct->length = (u32) struct_size;
-
- /* Return the final size of the structure */
-
- *structure_size = struct_size;
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_address64_stream
- *
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - Pointer to where the number of bytes
- * used in the output_buffer is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
- *
- ******************************************************************************/
-
-acpi_status
-acpi_rs_address64_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
-{
- u8 *buffer;
- u16 *length_field;
-
- ACPI_FUNCTION_TRACE("rs_address64_stream");
-
- buffer = *output_buffer;
-
- /* Set the Descriptor Type field */
-
- *buffer = ACPI_RDESC_TYPE_QWORD_ADDRESS_SPACE;
- buffer += 1;
-
- /* Save a pointer to the Length field - to be filled in later */
-
- length_field = ACPI_CAST_PTR(u16, buffer);
- buffer += 2;
-
- /* Set the Resource Type (Memory, Io, bus_number) */
-
- *buffer = (u8) (linked_list->data.address64.resource_type & 0x03);
- buffer += 1;
-
- /* Set the general flags */
-
- *buffer = acpi_rs_encode_general_flags(&linked_list->data);
- buffer += 1;
-
- /* Set the type specific flags */
-
- *buffer = acpi_rs_encode_specific_flags(&linked_list->data);
- buffer += 1;
-
- /* Set the address space granularity */
-
- ACPI_MOVE_64_TO_64(buffer, &linked_list->data.address64.granularity);
- buffer += 8;
-
- /* Set the address range minimum */
-
- ACPI_MOVE_64_TO_64(buffer,
- &linked_list->data.address64.min_address_range);
- buffer += 8;
-
- /* Set the address range maximum */
-
- ACPI_MOVE_64_TO_64(buffer,
- &linked_list->data.address64.max_address_range);
- buffer += 8;
-
- /* Set the address translation offset */
-
- ACPI_MOVE_64_TO_64(buffer,
- &linked_list->data.address64.
- address_translation_offset);
- buffer += 8;
-
- /* Set the address length */
-
- ACPI_MOVE_64_TO_64(buffer, &linked_list->data.address64.address_length);
- buffer += 8;
-
- /* Resource Source Index and Resource Source are optional */
-
- if (linked_list->data.address64.resource_source.string_length) {
- *buffer =
- (u8) linked_list->data.address64.resource_source.index;
- buffer += 1;
-
- /* Copy the resource_source string */
-
- ACPI_STRCPY((char *)buffer,
- linked_list->data.address64.resource_source.
- string_ptr);
-
- /*
- * Buffer needs to be set to the length of the string + one for the
- * terminating null
- */
- buffer +=
- (acpi_size) (ACPI_STRLEN
- (linked_list->data.address64.resource_source.
- string_ptr) + 1);
- }
-
- /* Return the number of bytes consumed in this operation */
-
- *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
-
- /*
- * Set the length field to the number of bytes consumed
- * minus the header size (3 bytes)
- */
- *length_field = (u16) (*bytes_consumed - 3);
- return_ACPI_STATUS(AE_OK);
}
diff --git a/drivers/acpi/resources/rscalc.c b/drivers/acpi/resources/rscalc.c
index 378f583..7d6481d 100644
--- a/drivers/acpi/resources/rscalc.c
+++ b/drivers/acpi/resources/rscalc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -49,652 +49,433 @@
#define _COMPONENT ACPI_RESOURCES
ACPI_MODULE_NAME("rscalc")
+/* Local prototypes */
+static u8 acpi_rs_count_set_bits(u16 bit_field);
+
+static acpi_rs_length
+acpi_rs_struct_option_length(struct acpi_resource_source *resource_source);
+
+static u32
+acpi_rs_stream_option_length(u32 resource_length, u32 minimum_total_length);
+
/*******************************************************************************
*
- * FUNCTION: acpi_rs_get_byte_stream_length
+ * FUNCTION: acpi_rs_count_set_bits
*
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * size_needed - u32 pointer of the size buffer needed
- * to properly return the parsed data
+ * PARAMETERS: bit_field - Field in which to count bits
+ *
+ * RETURN: Number of bits set within the field
+ *
+ * DESCRIPTION: Count the number of bits set in a resource field. Used for
+ * (Short descriptor) interrupt and DMA lists.
+ *
+ ******************************************************************************/
+
+static u8 acpi_rs_count_set_bits(u16 bit_field)
+{
+ u8 bits_set;
+
+ ACPI_FUNCTION_ENTRY();
+
+ for (bits_set = 0; bit_field; bits_set++) {
+ /* Zero the least significant bit that is set */
+
+ bit_field &= (bit_field - 1);
+ }
+
+ return (bits_set);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_struct_option_length
+ *
+ * PARAMETERS: resource_source - Pointer to optional descriptor field
*
* RETURN: Status
*
- * DESCRIPTION: Takes the resource byte stream and parses it once, calculating
- * the size buffer needed to hold the linked list that conveys
- * the resource data.
+ * DESCRIPTION: Common code to handle optional resource_source_index and
+ * resource_source fields in some Large descriptors. Used during
+ * list-to-stream conversion
*
******************************************************************************/
-acpi_status
-acpi_rs_get_byte_stream_length(struct acpi_resource *linked_list,
- acpi_size * size_needed)
+
+static acpi_rs_length
+acpi_rs_struct_option_length(struct acpi_resource_source *resource_source)
{
- acpi_size byte_stream_size_needed = 0;
- acpi_size segment_size;
- u8 done = FALSE;
+ ACPI_FUNCTION_ENTRY();
- ACPI_FUNCTION_TRACE("rs_get_byte_stream_length");
+ /*
+ * If the resource_source string is valid, return the size of the string
+ * (string_length includes the NULL terminator) plus the size of the
+ * resource_source_index (1).
+ */
+ if (resource_source->string_ptr) {
+ return ((acpi_rs_length) (resource_source->string_length + 1));
+ }
- while (!done) {
- /* Init the variable that will hold the size to add to the total. */
+ return (0);
+}
- segment_size = 0;
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_stream_option_length
+ *
+ * PARAMETERS: resource_length - Length from the resource header
+ * minimum_total_length - Minimum length of this resource, before
+ * any optional fields. Includes header size
+ *
+ * RETURN: Length of optional string (0 if no string present)
+ *
+ * DESCRIPTION: Common code to handle optional resource_source_index and
+ * resource_source fields in some Large descriptors. Used during
+ * stream-to-list conversion
+ *
+ ******************************************************************************/
- switch (linked_list->id) {
- case ACPI_RSTYPE_IRQ:
+static u32
+acpi_rs_stream_option_length(u32 resource_length,
+ u32 minimum_aml_resource_length)
+{
+ u32 string_length = 0;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /*
+ * The resource_source_index and resource_source are optional elements of some
+ * Large-type resource descriptors.
+ */
+
+ /*
+ * If the length of the actual resource descriptor is greater than the ACPI
+ * spec-defined minimum length, it means that a resource_source_index exists
+ * and is followed by a (required) null terminated string. The string length
+ * (including the null terminator) is the resource length minus the minimum
+ * length, minus one byte for the resource_source_index itself.
+ */
+ if (resource_length > minimum_aml_resource_length) {
+ /* Compute the length of the optional string */
+
+ string_length =
+ resource_length - minimum_aml_resource_length - 1;
+ }
+
+ /* Round up length to 32 bits for internal structure alignment */
+
+ return (ACPI_ROUND_UP_to_32_bITS(string_length));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_get_aml_length
+ *
+ * PARAMETERS: Resource - Pointer to the resource linked list
+ * size_needed - Where the required size is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Takes a linked list of internal resource descriptors and
+ * calculates the size buffer needed to hold the corresponding
+ * external resource byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_get_aml_length(struct acpi_resource * resource, acpi_size * size_needed)
+{
+ acpi_size aml_size_needed = 0;
+ acpi_rs_length total_size;
+
+ ACPI_FUNCTION_TRACE("rs_get_aml_length");
+
+ /* Traverse entire list of internal resource descriptors */
+
+ while (resource) {
+ /* Validate the descriptor type */
+
+ if (resource->type > ACPI_RESOURCE_TYPE_MAX) {
+ return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
+ }
+
+ /* Get the base size of the (external stream) resource descriptor */
+
+ total_size = acpi_gbl_aml_resource_sizes[resource->type];
+
+ /*
+ * Augment the base size for descriptors with optional and/or
+ * variable-length fields
+ */
+ switch (resource->type) {
+ case ACPI_RESOURCE_TYPE_VENDOR:
/*
- * IRQ Resource
- * For an IRQ Resource, Byte 3, although optional, will always be
- * created - it holds IRQ information.
- */
- segment_size = 4;
- break;
-
- case ACPI_RSTYPE_DMA:
- /*
- * DMA Resource
- * For this resource the size is static
- */
- segment_size = 3;
- break;
-
- case ACPI_RSTYPE_START_DPF:
- /*
- * Start Dependent Functions Resource
- * For a start_dependent_functions Resource, Byte 1, although
- * optional, will always be created.
- */
- segment_size = 2;
- break;
-
- case ACPI_RSTYPE_END_DPF:
- /*
- * End Dependent Functions Resource
- * For this resource the size is static
- */
- segment_size = 1;
- break;
-
- case ACPI_RSTYPE_IO:
- /*
- * IO Port Resource
- * For this resource the size is static
- */
- segment_size = 8;
- break;
-
- case ACPI_RSTYPE_FIXED_IO:
- /*
- * Fixed IO Port Resource
- * For this resource the size is static
- */
- segment_size = 4;
- break;
-
- case ACPI_RSTYPE_VENDOR:
- /*
- * Vendor Defined Resource
+ * Vendor Defined Resource:
* For a Vendor Specific resource, if the Length is between 1 and 7
* it will be created as a Small Resource data type, otherwise it
* is a Large Resource data type.
*/
- if (linked_list->data.vendor_specific.length > 7) {
- segment_size = 3;
- } else {
- segment_size = 1;
+ if (resource->data.vendor.byte_length > 7) {
+ /* Base size of a Large resource descriptor */
+
+ total_size =
+ sizeof(struct aml_resource_large_header);
}
- segment_size +=
- linked_list->data.vendor_specific.length;
+
+ /* Add the size of the vendor-specific data */
+
+ total_size = (acpi_rs_length)
+ (total_size + resource->data.vendor.byte_length);
break;
- case ACPI_RSTYPE_END_TAG:
+ case ACPI_RESOURCE_TYPE_END_TAG:
/*
- * End Tag
- * For this resource the size is static
+ * End Tag:
+ * We are done -- return the accumulated total size.
*/
- segment_size = 2;
- done = TRUE;
+ *size_needed = aml_size_needed + total_size;
+
+ /* Normal exit */
+
+ return_ACPI_STATUS(AE_OK);
+
+ case ACPI_RESOURCE_TYPE_ADDRESS16:
+ /*
+ * 16-Bit Address Resource:
+ * Add the size of the optional resource_source info
+ */
+ total_size = (acpi_rs_length)
+ (total_size +
+ acpi_rs_struct_option_length(&resource->data.
+ address16.
+ resource_source));
break;
- case ACPI_RSTYPE_MEM24:
+ case ACPI_RESOURCE_TYPE_ADDRESS32:
/*
- * 24-Bit Memory Resource
- * For this resource the size is static
+ * 32-Bit Address Resource:
+ * Add the size of the optional resource_source info
*/
- segment_size = 12;
+ total_size = (acpi_rs_length)
+ (total_size +
+ acpi_rs_struct_option_length(&resource->data.
+ address32.
+ resource_source));
break;
- case ACPI_RSTYPE_MEM32:
+ case ACPI_RESOURCE_TYPE_ADDRESS64:
/*
- * 32-Bit Memory Range Resource
- * For this resource the size is static
+ * 64-Bit Address Resource:
+ * Add the size of the optional resource_source info
*/
- segment_size = 20;
+ total_size = (acpi_rs_length)
+ (total_size +
+ acpi_rs_struct_option_length(&resource->data.
+ address64.
+ resource_source));
break;
- case ACPI_RSTYPE_FIXED_MEM32:
+ case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
/*
- * 32-Bit Fixed Memory Resource
- * For this resource the size is static
+ * Extended IRQ Resource:
+ * Add the size of each additional optional interrupt beyond the
+ * required 1 (4 bytes for each u32 interrupt number)
*/
- segment_size = 12;
- break;
-
- case ACPI_RSTYPE_ADDRESS16:
- /*
- * 16-Bit Address Resource
- * The base size of this byte stream is 16. If a Resource Source
- * string is not NULL, add 1 for the Index + the length of the null
- * terminated string Resource Source + 1 for the null.
- */
- segment_size = 16;
-
- if (linked_list->data.address16.resource_source.
- string_ptr) {
- segment_size +=
- linked_list->data.address16.resource_source.
- string_length;
- segment_size++;
- }
- break;
-
- case ACPI_RSTYPE_ADDRESS32:
- /*
- * 32-Bit Address Resource
- * The base size of this byte stream is 26. If a Resource
- * Source string is not NULL, add 1 for the Index + the
- * length of the null terminated string Resource Source +
- * 1 for the null.
- */
- segment_size = 26;
-
- if (linked_list->data.address32.resource_source.
- string_ptr) {
- segment_size +=
- linked_list->data.address32.resource_source.
- string_length;
- segment_size++;
- }
- break;
-
- case ACPI_RSTYPE_ADDRESS64:
- /*
- * 64-Bit Address Resource
- * The base size of this byte stream is 46. If a resource_source
- * string is not NULL, add 1 for the Index + the length of the null
- * terminated string Resource Source + 1 for the null.
- */
- segment_size = 46;
-
- if (linked_list->data.address64.resource_source.
- string_ptr) {
- segment_size +=
- linked_list->data.address64.resource_source.
- string_length;
- segment_size++;
- }
- break;
-
- case ACPI_RSTYPE_EXT_IRQ:
- /*
- * Extended IRQ Resource
- * The base size of this byte stream is 9. This is for an Interrupt
- * table length of 1. For each additional interrupt, add 4.
- * If a Resource Source string is not NULL, add 1 for the
- * Index + the length of the null terminated string
- * Resource Source + 1 for the null.
- */
- segment_size = 9 + (((acpi_size)
- linked_list->data.extended_irq.
- number_of_interrupts - 1) * 4);
-
- if (linked_list->data.extended_irq.resource_source.
- string_ptr) {
- segment_size +=
- linked_list->data.extended_irq.
- resource_source.string_length;
- segment_size++;
- }
+ total_size = (acpi_rs_length)
+ (total_size +
+ ((resource->data.extended_irq.interrupt_count -
+ 1) * 4) +
+ /* Add the size of the optional resource_source info */
+ acpi_rs_struct_option_length(&resource->data.
+ extended_irq.
+ resource_source));
break;
default:
-
- /* If we get here, everything is out of sync, exit with error */
-
- return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
-
- } /* switch (linked_list->Id) */
+ break;
+ }
/* Update the total */
- byte_stream_size_needed += segment_size;
+ aml_size_needed += total_size;
/* Point to the next object */
- linked_list = ACPI_PTR_ADD(struct acpi_resource,
- linked_list, linked_list->length);
+ resource =
+ ACPI_ADD_PTR(struct acpi_resource, resource,
+ resource->length);
}
- /* This is the data the caller needs */
+ /* Did not find an end_tag resource descriptor */
- *size_needed = byte_stream_size_needed;
- return_ACPI_STATUS(AE_OK);
+ return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
}
/*******************************************************************************
*
* FUNCTION: acpi_rs_get_list_length
*
- * PARAMETERS: byte_stream_buffer - Pointer to the resource byte stream
- * byte_stream_buffer_length - Size of byte_stream_buffer
- * size_needed - u32 pointer of the size buffer
- * needed to properly return the
- * parsed data
+ * PARAMETERS: aml_buffer - Pointer to the resource byte stream
+ * aml_buffer_length - Size of aml_buffer
+ * size_needed - Where the size needed is returned
*
* RETURN: Status
*
- * DESCRIPTION: Takes the resource byte stream and parses it once, calculating
- * the size buffer needed to hold the linked list that conveys
- * the resource data.
+ * DESCRIPTION: Takes an external resource byte stream and calculates the size
+ * buffer needed to hold the corresponding internal resource
+ * descriptor linked list.
*
******************************************************************************/
acpi_status
-acpi_rs_get_list_length(u8 * byte_stream_buffer,
- u32 byte_stream_buffer_length, acpi_size * size_needed)
+acpi_rs_get_list_length(u8 * aml_buffer,
+ u32 aml_buffer_length, acpi_size * size_needed)
{
- u32 buffer_size = 0;
- u32 bytes_parsed = 0;
- u8 number_of_interrupts = 0;
- u8 number_of_channels = 0;
- u8 resource_type;
- u32 structure_size;
- u32 bytes_consumed;
+ acpi_status status;
+ u8 *end_aml;
u8 *buffer;
- u8 temp8;
+ u32 buffer_size = 0;
u16 temp16;
- u8 index;
- u8 additional_bytes;
+ u16 resource_length;
+ u32 extra_struct_bytes;
+ u8 resource_index;
+ u8 minimum_aml_resource_length;
ACPI_FUNCTION_TRACE("rs_get_list_length");
- while (bytes_parsed < byte_stream_buffer_length) {
- /* The next byte in the stream is the resource type */
+ end_aml = aml_buffer + aml_buffer_length;
- resource_type = acpi_rs_get_resource_type(*byte_stream_buffer);
+ /* Walk the list of AML resource descriptors */
- switch (resource_type) {
- case ACPI_RDESC_TYPE_MEMORY_24:
+ while (aml_buffer < end_aml) {
+ /* Validate the Resource Type and Resource Length */
+
+ status = acpi_ut_validate_resource(aml_buffer, &resource_index);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Get the resource length and base (minimum) AML size */
+
+ resource_length = acpi_ut_get_resource_length(aml_buffer);
+ minimum_aml_resource_length =
+ acpi_gbl_resource_aml_sizes[resource_index];
+
+ /*
+ * Augment the size for descriptors with optional
+ * and/or variable length fields
+ */
+ extra_struct_bytes = 0;
+ buffer =
+ aml_buffer + acpi_ut_get_resource_header_length(aml_buffer);
+
+ switch (acpi_ut_get_resource_type(aml_buffer)) {
+ case ACPI_RESOURCE_NAME_IRQ:
/*
- * 24-Bit Memory Resource
+ * IRQ Resource:
+ * Get the number of bits set in the 16-bit IRQ mask
*/
- bytes_consumed = 12;
-
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_mem24);
- break;
-
- case ACPI_RDESC_TYPE_LARGE_VENDOR:
- /*
- * Vendor Defined Resource
- */
- buffer = byte_stream_buffer;
- ++buffer;
-
ACPI_MOVE_16_TO_16(&temp16, buffer);
- bytes_consumed = temp16 + 3;
-
- /* Ensure a 32-bit boundary for the structure */
-
- temp16 = (u16) ACPI_ROUND_UP_to_32_bITS(temp16);
-
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_vendor) +
- (temp16 * sizeof(u8));
+ extra_struct_bytes = acpi_rs_count_set_bits(temp16);
break;
- case ACPI_RDESC_TYPE_MEMORY_32:
+ case ACPI_RESOURCE_NAME_DMA:
/*
- * 32-Bit Memory Range Resource
+ * DMA Resource:
+ * Get the number of bits set in the 8-bit DMA mask
*/
- bytes_consumed = 20;
-
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_mem32);
+ extra_struct_bytes = acpi_rs_count_set_bits(*buffer);
break;
- case ACPI_RDESC_TYPE_FIXED_MEMORY_32:
+ case ACPI_RESOURCE_NAME_VENDOR_SMALL:
/*
- * 32-Bit Fixed Memory Resource
+ * Vendor Resource:
+ * Ensure a 32-bit boundary for the structure
*/
- bytes_consumed = 12;
-
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct
- acpi_resource_fixed_mem32);
+ extra_struct_bytes =
+ ACPI_ROUND_UP_to_32_bITS(resource_length) -
+ resource_length;
break;
- case ACPI_RDESC_TYPE_EXTENDED_ADDRESS_SPACE:
+ case ACPI_RESOURCE_NAME_END_TAG:
/*
- * 64-Bit Address Resource
+ * End Tag: This is the normal exit, add size of end_tag
*/
- buffer = byte_stream_buffer;
+ *size_needed = buffer_size + ACPI_RS_SIZE_MIN;
+ return_ACPI_STATUS(AE_OK);
- ++buffer;
- ACPI_MOVE_16_TO_16(&temp16, buffer);
-
- bytes_consumed = temp16 + 3;
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct
- acpi_resource_address64);
+ case ACPI_RESOURCE_NAME_VENDOR_LARGE:
+ /*
+ * Vendor Resource:
+ * Add vendor data and ensure a 32-bit boundary for the structure
+ */
+ extra_struct_bytes =
+ ACPI_ROUND_UP_to_32_bITS(resource_length) -
+ resource_length;
break;
- case ACPI_RDESC_TYPE_QWORD_ADDRESS_SPACE:
+ case ACPI_RESOURCE_NAME_ADDRESS32:
+ case ACPI_RESOURCE_NAME_ADDRESS16:
/*
- * 64-Bit Address Resource
+ * 32-Bit or 16-bit Address Resource:
+ * Add the size of any optional data (resource_source)
*/
- buffer = byte_stream_buffer;
-
- ++buffer;
- ACPI_MOVE_16_TO_16(&temp16, buffer);
-
- bytes_consumed = temp16 + 3;
-
- /*
- * Resource Source Index and Resource Source are optional elements.
- * Check the length of the Bytestream. If it is greater than 43,
- * that means that an Index exists and is followed by a null
- * terminated string. Therefore, set the temp variable to the
- * length minus the minimum byte stream length plus the byte for
- * the Index to determine the size of the NULL terminated string.
- */
- if (43 < temp16) {
- temp8 = (u8) (temp16 - 44);
- } else {
- temp8 = 0;
- }
-
- /* Ensure a 64-bit boundary for the structure */
-
- temp8 = (u8) ACPI_ROUND_UP_to_64_bITS(temp8);
-
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_address64)
- + (temp8 * sizeof(u8));
+ extra_struct_bytes =
+ acpi_rs_stream_option_length(resource_length,
+ minimum_aml_resource_length);
break;
- case ACPI_RDESC_TYPE_DWORD_ADDRESS_SPACE:
+ case ACPI_RESOURCE_NAME_EXTENDED_IRQ:
/*
- * 32-Bit Address Resource
+ * Extended IRQ:
+ * Point past the interrupt_vector_flags to get the
+ * interrupt_table_length.
*/
- buffer = byte_stream_buffer;
+ buffer++;
- ++buffer;
- ACPI_MOVE_16_TO_16(&temp16, buffer);
-
- bytes_consumed = temp16 + 3;
-
- /*
- * Resource Source Index and Resource Source are optional elements.
- * Check the length of the Bytestream. If it is greater than 23,
- * that means that an Index exists and is followed by a null
- * terminated string. Therefore, set the temp variable to the
- * length minus the minimum byte stream length plus the byte for
- * the Index to determine the size of the NULL terminated string.
- */
- if (23 < temp16) {
- temp8 = (u8) (temp16 - 24);
- } else {
- temp8 = 0;
- }
-
- /* Ensure a 32-bit boundary for the structure */
-
- temp8 = (u8) ACPI_ROUND_UP_to_32_bITS(temp8);
-
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_address32)
- + (temp8 * sizeof(u8));
+ extra_struct_bytes =
+ /*
+ * Add 4 bytes for each additional interrupt. Note: at
+ * least one interrupt is required and is included in
+ * the minimum descriptor size
+ */
+ ((*buffer - 1) * sizeof(u32)) +
+ /* Add the size of any optional data (resource_source) */
+ acpi_rs_stream_option_length(resource_length -
+ extra_struct_bytes,
+ minimum_aml_resource_length);
break;
- case ACPI_RDESC_TYPE_WORD_ADDRESS_SPACE:
+ case ACPI_RESOURCE_NAME_ADDRESS64:
/*
- * 16-Bit Address Resource
+ * 64-Bit Address Resource:
+ * Add the size of any optional data (resource_source)
+ * Ensure a 64-bit boundary for the structure
*/
- buffer = byte_stream_buffer;
-
- ++buffer;
- ACPI_MOVE_16_TO_16(&temp16, buffer);
-
- bytes_consumed = temp16 + 3;
-
- /*
- * Resource Source Index and Resource Source are optional elements.
- * Check the length of the Bytestream. If it is greater than 13,
- * that means that an Index exists and is followed by a null
- * terminated string. Therefore, set the temp variable to the
- * length minus the minimum byte stream length plus the byte for
- * the Index to determine the size of the NULL terminated string.
- */
- if (13 < temp16) {
- temp8 = (u8) (temp16 - 14);
- } else {
- temp8 = 0;
- }
-
- /* Ensure a 32-bit boundary for the structure */
-
- temp8 = (u8) ACPI_ROUND_UP_to_32_bITS(temp8);
-
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_address16)
- + (temp8 * sizeof(u8));
- break;
-
- case ACPI_RDESC_TYPE_EXTENDED_XRUPT:
- /*
- * Extended IRQ
- */
- buffer = byte_stream_buffer;
-
- ++buffer;
- ACPI_MOVE_16_TO_16(&temp16, buffer);
-
- bytes_consumed = temp16 + 3;
-
- /*
- * Point past the length field and the Interrupt vector flags to
- * save off the Interrupt table length to the Temp8 variable.
- */
- buffer += 3;
- temp8 = *buffer;
-
- /*
- * To compensate for multiple interrupt numbers, add 4 bytes for
- * each additional interrupts greater than 1
- */
- additional_bytes = (u8) ((temp8 - 1) * 4);
-
- /*
- * Resource Source Index and Resource Source are optional elements.
- * Check the length of the Bytestream. If it is greater than 9,
- * that means that an Index exists and is followed by a null
- * terminated string. Therefore, set the temp variable to the
- * length minus the minimum byte stream length plus the byte for
- * the Index to determine the size of the NULL terminated string.
- */
- if (9 + additional_bytes < temp16) {
- temp8 = (u8) (temp16 - (9 + additional_bytes));
- } else {
- temp8 = 0;
- }
-
- /* Ensure a 32-bit boundary for the structure */
-
- temp8 = (u8) ACPI_ROUND_UP_to_32_bITS(temp8);
-
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_ext_irq) +
- (additional_bytes * sizeof(u8)) +
- (temp8 * sizeof(u8));
- break;
-
- case ACPI_RDESC_TYPE_IRQ_FORMAT:
- /*
- * IRQ Resource.
- * Determine if it there are two or three trailing bytes
- */
- buffer = byte_stream_buffer;
- temp8 = *buffer;
-
- if (temp8 & 0x01) {
- bytes_consumed = 4;
- } else {
- bytes_consumed = 3;
- }
-
- /* Point past the descriptor */
-
- ++buffer;
-
- /* Look at the number of bits set */
-
- ACPI_MOVE_16_TO_16(&temp16, buffer);
-
- for (index = 0; index < 16; index++) {
- if (temp16 & 0x1) {
- ++number_of_interrupts;
- }
-
- temp16 >>= 1;
- }
-
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_io) +
- (number_of_interrupts * sizeof(u32));
- break;
-
- case ACPI_RDESC_TYPE_DMA_FORMAT:
- /*
- * DMA Resource
- */
- buffer = byte_stream_buffer;
- bytes_consumed = 3;
-
- /* Point past the descriptor */
-
- ++buffer;
-
- /* Look at the number of bits set */
-
- temp8 = *buffer;
-
- for (index = 0; index < 8; index++) {
- if (temp8 & 0x1) {
- ++number_of_channels;
- }
-
- temp8 >>= 1;
- }
-
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_dma) +
- (number_of_channels * sizeof(u32));
- break;
-
- case ACPI_RDESC_TYPE_START_DEPENDENT:
- /*
- * Start Dependent Functions Resource
- * Determine if it there are two or three trailing bytes
- */
- buffer = byte_stream_buffer;
- temp8 = *buffer;
-
- if (temp8 & 0x01) {
- bytes_consumed = 2;
- } else {
- bytes_consumed = 1;
- }
-
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct
- acpi_resource_start_dpf);
- break;
-
- case ACPI_RDESC_TYPE_END_DEPENDENT:
- /*
- * End Dependent Functions Resource
- */
- bytes_consumed = 1;
- structure_size = ACPI_RESOURCE_LENGTH;
- break;
-
- case ACPI_RDESC_TYPE_IO_PORT:
- /*
- * IO Port Resource
- */
- bytes_consumed = 8;
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_io);
- break;
-
- case ACPI_RDESC_TYPE_FIXED_IO_PORT:
- /*
- * Fixed IO Port Resource
- */
- bytes_consumed = 4;
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_fixed_io);
- break;
-
- case ACPI_RDESC_TYPE_SMALL_VENDOR:
- /*
- * Vendor Specific Resource
- */
- buffer = byte_stream_buffer;
-
- temp8 = *buffer;
- temp8 = (u8) (temp8 & 0x7);
- bytes_consumed = temp8 + 1;
-
- /* Ensure a 32-bit boundary for the structure */
-
- temp8 = (u8) ACPI_ROUND_UP_to_32_bITS(temp8);
- structure_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_vendor) +
- (temp8 * sizeof(u8));
- break;
-
- case ACPI_RDESC_TYPE_END_TAG:
- /*
- * End Tag
- */
- bytes_consumed = 2;
- structure_size = ACPI_RESOURCE_LENGTH;
- byte_stream_buffer_length = bytes_parsed;
+ extra_struct_bytes =
+ ACPI_ROUND_UP_to_64_bITS
+ (acpi_rs_stream_option_length
+ (resource_length, minimum_aml_resource_length));
break;
default:
- /*
- * If we get here, everything is out of sync,
- * exit with an error
- */
- return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
+ break;
}
- /* Update the return value and counter */
+ /* Update the required buffer size for the internal descriptor structs */
- buffer_size += (u32) ACPI_ALIGN_RESOURCE_SIZE(structure_size);
- bytes_parsed += bytes_consumed;
+ temp16 = (u16) (acpi_gbl_resource_struct_sizes[resource_index] +
+ extra_struct_bytes);
+ buffer_size += (u32) ACPI_ROUND_UP_TO_NATIVE_WORD(temp16);
- /* Set the byte stream to point to the next resource */
-
- byte_stream_buffer += bytes_consumed;
+ /*
+ * Point to the next resource within the stream
+ * using the size of the header plus the length contained in the header
+ */
+ aml_buffer += acpi_ut_get_descriptor_length(aml_buffer);
}
- /* This is the data the caller needs */
+ /* Did not find an end_tag resource descriptor */
- *size_needed = buffer_size;
- return_ACPI_STATUS(AE_OK);
+ return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
}
/*******************************************************************************
@@ -760,13 +541,13 @@
for (table_index = 0; table_index < 4 && !name_found;
table_index++) {
- if ((ACPI_TYPE_STRING ==
- ACPI_GET_OBJECT_TYPE(*sub_object_list))
- ||
- ((ACPI_TYPE_LOCAL_REFERENCE ==
- ACPI_GET_OBJECT_TYPE(*sub_object_list))
- && ((*sub_object_list)->reference.opcode ==
- AML_INT_NAMEPATH_OP))) {
+ if (*sub_object_list && /* Null object allowed */
+ ((ACPI_TYPE_STRING ==
+ ACPI_GET_OBJECT_TYPE(*sub_object_list)) ||
+ ((ACPI_TYPE_LOCAL_REFERENCE ==
+ ACPI_GET_OBJECT_TYPE(*sub_object_list)) &&
+ ((*sub_object_list)->reference.opcode ==
+ AML_INT_NAMEPATH_OP)))) {
name_found = TRUE;
} else {
/* Look at the next element */
diff --git a/drivers/acpi/resources/rscreate.c b/drivers/acpi/resources/rscreate.c
index 0911526..8c128de 100644
--- a/drivers/acpi/resources/rscreate.c
+++ b/drivers/acpi/resources/rscreate.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -53,10 +53,10 @@
*
* FUNCTION: acpi_rs_create_resource_list
*
- * PARAMETERS: byte_stream_buffer - Pointer to the resource byte stream
- * output_buffer - Pointer to the user's buffer
+ * PARAMETERS: aml_buffer - Pointer to the resource byte stream
+ * output_buffer - Pointer to the user's buffer
*
- * RETURN: Status - AE_OK if okay, else a valid acpi_status code
+ * RETURN: Status: AE_OK if okay, else a valid acpi_status code
* If output_buffer is not large enough, output_buffer_length
* indicates how large output_buffer should be, else it
* indicates how may u8 elements of output_buffer are valid.
@@ -67,33 +67,30 @@
*
******************************************************************************/
acpi_status
-acpi_rs_create_resource_list(union acpi_operand_object *byte_stream_buffer,
+acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer,
struct acpi_buffer *output_buffer)
{
acpi_status status;
- u8 *byte_stream_start;
+ u8 *aml_start;
acpi_size list_size_needed = 0;
- u32 byte_stream_buffer_length;
+ u32 aml_buffer_length;
ACPI_FUNCTION_TRACE("rs_create_resource_list");
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "byte_stream_buffer = %p\n",
- byte_stream_buffer));
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "aml_buffer = %p\n", aml_buffer));
/* Params already validated, so we don't re-validate here */
- byte_stream_buffer_length = byte_stream_buffer->buffer.length;
- byte_stream_start = byte_stream_buffer->buffer.pointer;
+ aml_buffer_length = aml_buffer->buffer.length;
+ aml_start = aml_buffer->buffer.pointer;
/*
- * Pass the byte_stream_buffer into a module that can calculate
+ * Pass the aml_buffer into a module that can calculate
* the buffer size needed for the linked list
*/
- status =
- acpi_rs_get_list_length(byte_stream_start,
- byte_stream_buffer_length,
- &list_size_needed);
+ status = acpi_rs_get_list_length(aml_start, aml_buffer_length,
+ &list_size_needed);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Status=%X list_size_needed=%X\n",
status, (u32) list_size_needed));
@@ -110,10 +107,8 @@
/* Do the conversion */
- status =
- acpi_rs_byte_stream_to_list(byte_stream_start,
- byte_stream_buffer_length,
- output_buffer->pointer);
+ status = acpi_rs_convert_aml_to_resources(aml_start, aml_buffer_length,
+ output_buffer->pointer);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
@@ -212,21 +207,20 @@
/* Each element of the top-level package must also be a package */
if (ACPI_GET_OBJECT_TYPE(*top_object_list) != ACPI_TYPE_PACKAGE) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "(PRT[%X]) Need sub-package, found %s\n",
- index,
- acpi_ut_get_object_type_name
- (*top_object_list)));
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%X]) Need sub-package, found %s",
+ index,
+ acpi_ut_get_object_type_name
+ (*top_object_list)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
/* Each sub-package must be of length 4 */
if ((*top_object_list)->package.count != 4) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "(PRT[%X]) Need package of length 4, found length %d\n",
- index,
- (*top_object_list)->package.count));
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%X]) Need package of length 4, found length %d",
+ index, (*top_object_list)->package.count));
return_ACPI_STATUS(AE_AML_PACKAGE_LIMIT);
}
@@ -243,11 +237,10 @@
if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
user_prt->address = obj_desc->integer.value;
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "(PRT[%X].Address) Need Integer, found %s\n",
- index,
- acpi_ut_get_object_type_name
- (obj_desc)));
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%X].Address) Need Integer, found %s",
+ index,
+ acpi_ut_get_object_type_name(obj_desc)));
return_ACPI_STATUS(AE_BAD_DATA);
}
@@ -257,76 +250,83 @@
if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
user_prt->pin = (u32) obj_desc->integer.value;
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "(PRT[%X].Pin) Need Integer, found %s\n",
- index,
- acpi_ut_get_object_type_name
- (obj_desc)));
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%X].Pin) Need Integer, found %s",
+ index,
+ acpi_ut_get_object_type_name(obj_desc)));
return_ACPI_STATUS(AE_BAD_DATA);
}
- /* 3) Third subobject: Dereference the PRT.source_name */
-
+ /*
+ * 3) Third subobject: Dereference the PRT.source_name
+ * The name may be unresolved (slack mode), so allow a null object
+ */
obj_desc = sub_object_list[2];
- switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
- case ACPI_TYPE_LOCAL_REFERENCE:
+ if (obj_desc) {
+ switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
+ case ACPI_TYPE_LOCAL_REFERENCE:
- if (obj_desc->reference.opcode != AML_INT_NAMEPATH_OP) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "(PRT[%X].Source) Need name, found reference op %X\n",
- index,
- obj_desc->reference.opcode));
+ if (obj_desc->reference.opcode !=
+ AML_INT_NAMEPATH_OP) {
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%X].Source) Need name, found reference op %X",
+ index,
+ obj_desc->reference.
+ opcode));
+ return_ACPI_STATUS(AE_BAD_DATA);
+ }
+
+ node = obj_desc->reference.node;
+
+ /* Use *remaining* length of the buffer as max for pathname */
+
+ path_buffer.length = output_buffer->length -
+ (u32) ((u8 *) user_prt->source -
+ (u8 *) output_buffer->pointer);
+ path_buffer.pointer = user_prt->source;
+
+ status =
+ acpi_ns_handle_to_pathname((acpi_handle)
+ node,
+ &path_buffer);
+
+ /* +1 to include null terminator */
+
+ user_prt->length +=
+ (u32) ACPI_STRLEN(user_prt->source) + 1;
+ break;
+
+ case ACPI_TYPE_STRING:
+
+ ACPI_STRCPY(user_prt->source,
+ obj_desc->string.pointer);
+
+ /*
+ * Add to the Length field the length of the string
+ * (add 1 for terminator)
+ */
+ user_prt->length += obj_desc->string.length + 1;
+ break;
+
+ case ACPI_TYPE_INTEGER:
+ /*
+ * If this is a number, then the Source Name is NULL, since the
+ * entire buffer was zeroed out, we can leave this alone.
+ *
+ * Add to the Length field the length of the u32 NULL
+ */
+ user_prt->length += sizeof(u32);
+ break;
+
+ default:
+
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%X].Source) Need Ref/String/Integer, found %s",
+ index,
+ acpi_ut_get_object_type_name
+ (obj_desc)));
return_ACPI_STATUS(AE_BAD_DATA);
}
-
- node = obj_desc->reference.node;
-
- /* Use *remaining* length of the buffer as max for pathname */
-
- path_buffer.length = output_buffer->length -
- (u32) ((u8 *) user_prt->source -
- (u8 *) output_buffer->pointer);
- path_buffer.pointer = user_prt->source;
-
- status =
- acpi_ns_handle_to_pathname((acpi_handle) node,
- &path_buffer);
-
- /* +1 to include null terminator */
-
- user_prt->length +=
- (u32) ACPI_STRLEN(user_prt->source) + 1;
- break;
-
- case ACPI_TYPE_STRING:
-
- ACPI_STRCPY(user_prt->source, obj_desc->string.pointer);
-
- /*
- * Add to the Length field the length of the string
- * (add 1 for terminator)
- */
- user_prt->length += obj_desc->string.length + 1;
- break;
-
- case ACPI_TYPE_INTEGER:
- /*
- * If this is a number, then the Source Name is NULL, since the
- * entire buffer was zeroed out, we can leave this alone.
- *
- * Add to the Length field the length of the u32 NULL
- */
- user_prt->length += sizeof(u32);
- break;
-
- default:
-
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "(PRT[%X].Source) Need Ref/String/Integer, found %s\n",
- index,
- acpi_ut_get_object_type_name
- (obj_desc)));
- return_ACPI_STATUS(AE_BAD_DATA);
}
/* Now align the current length */
@@ -340,11 +340,10 @@
if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
user_prt->source_index = (u32) obj_desc->integer.value;
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "(PRT[%X].source_index) Need Integer, found %s\n",
- index,
- acpi_ut_get_object_type_name
- (obj_desc)));
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%X].source_index) Need Integer, found %s",
+ index,
+ acpi_ut_get_object_type_name(obj_desc)));
return_ACPI_STATUS(AE_BAD_DATA);
}
@@ -360,7 +359,7 @@
/*******************************************************************************
*
- * FUNCTION: acpi_rs_create_byte_stream
+ * FUNCTION: acpi_rs_create_aml_resources
*
* PARAMETERS: linked_list_buffer - Pointer to the resource linked list
* output_buffer - Pointer to the user's buffer
@@ -377,13 +376,13 @@
******************************************************************************/
acpi_status
-acpi_rs_create_byte_stream(struct acpi_resource *linked_list_buffer,
- struct acpi_buffer *output_buffer)
+acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer,
+ struct acpi_buffer *output_buffer)
{
acpi_status status;
- acpi_size byte_stream_size_needed = 0;
+ acpi_size aml_size_needed = 0;
- ACPI_FUNCTION_TRACE("rs_create_byte_stream");
+ ACPI_FUNCTION_TRACE("rs_create_aml_resources");
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "linked_list_buffer = %p\n",
linked_list_buffer));
@@ -394,11 +393,10 @@
* Pass the linked_list_buffer into a module that calculates
* the buffer size needed for the byte stream.
*/
- status = acpi_rs_get_byte_stream_length(linked_list_buffer,
- &byte_stream_size_needed);
+ status = acpi_rs_get_aml_length(linked_list_buffer, &aml_size_needed);
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "byte_stream_size_needed=%X, %s\n",
- (u32) byte_stream_size_needed,
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "aml_size_needed=%X, %s\n",
+ (u32) aml_size_needed,
acpi_format_exception(status)));
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
@@ -406,8 +404,7 @@
/* Validate/Allocate/Clear caller buffer */
- status =
- acpi_ut_initialize_buffer(output_buffer, byte_stream_size_needed);
+ status = acpi_ut_initialize_buffer(output_buffer, aml_size_needed);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
@@ -415,9 +412,9 @@
/* Do the conversion */
status =
- acpi_rs_list_to_byte_stream(linked_list_buffer,
- byte_stream_size_needed,
- output_buffer->pointer);
+ acpi_rs_convert_resources_to_aml(linked_list_buffer,
+ aml_size_needed,
+ output_buffer->pointer);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/resources/rsdump.c b/drivers/acpi/resources/rsdump.c
index 75bd34d..e7de061 100644
--- a/drivers/acpi/resources/rsdump.c
+++ b/drivers/acpi/resources/rsdump.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -49,914 +49,544 @@
#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
/* Local prototypes */
-static void acpi_rs_dump_irq(union acpi_resource_data *data);
+static void acpi_rs_out_string(char *title, char *value);
-static void acpi_rs_dump_address16(union acpi_resource_data *data);
+static void acpi_rs_out_integer8(char *title, u8 value);
-static void acpi_rs_dump_address32(union acpi_resource_data *data);
+static void acpi_rs_out_integer16(char *title, u16 value);
-static void acpi_rs_dump_address64(union acpi_resource_data *data);
+static void acpi_rs_out_integer32(char *title, u32 value);
-static void acpi_rs_dump_dma(union acpi_resource_data *data);
+static void acpi_rs_out_integer64(char *title, u64 value);
-static void acpi_rs_dump_io(union acpi_resource_data *data);
+static void acpi_rs_out_title(char *title);
-static void acpi_rs_dump_extended_irq(union acpi_resource_data *data);
+static void acpi_rs_dump_byte_list(u16 length, u8 * data);
-static void acpi_rs_dump_fixed_io(union acpi_resource_data *data);
+static void acpi_rs_dump_dword_list(u8 length, u32 * data);
-static void acpi_rs_dump_fixed_memory32(union acpi_resource_data *data);
+static void acpi_rs_dump_short_byte_list(u8 length, u8 * data);
-static void acpi_rs_dump_memory24(union acpi_resource_data *data);
+static void
+acpi_rs_dump_resource_source(struct acpi_resource_source *resource_source);
-static void acpi_rs_dump_memory32(union acpi_resource_data *data);
+static void acpi_rs_dump_address_common(union acpi_resource_data *resource);
-static void acpi_rs_dump_start_depend_fns(union acpi_resource_data *data);
+static void
+acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table);
-static void acpi_rs_dump_vendor_specific(union acpi_resource_data *data);
+#define ACPI_RSD_OFFSET(f) (u8) ACPI_OFFSET (union acpi_resource_data,f)
+#define ACPI_PRT_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_pci_routing_table,f)
+#define ACPI_RSD_TABLE_SIZE(name) (sizeof(name) / sizeof (struct acpi_rsdump_info))
/*******************************************************************************
*
- * FUNCTION: acpi_rs_dump_irq
+ * Resource Descriptor info tables
*
- * PARAMETERS: Data - pointer to the resource structure to dump.
+ * Note: The first table entry must be a Title or Literal and must contain
+ * the table length (number of table entries)
+ *
+ ******************************************************************************/
+
+struct acpi_rsdump_info acpi_rs_dump_irq[6] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_irq), "IRQ", NULL},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(irq.triggering), "Triggering",
+ acpi_gbl_HEdecode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(irq.polarity), "Polarity",
+ acpi_gbl_LLdecode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(irq.sharable), "Sharing",
+ acpi_gbl_SHRdecode},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(irq.interrupt_count),
+ "Interrupt Count", NULL},
+ {ACPI_RSD_SHORTLIST, ACPI_RSD_OFFSET(irq.interrupts[0]),
+ "Interrupt List", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_dma[6] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_dma), "DMA", NULL},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(dma.type), "Speed",
+ acpi_gbl_TYPdecode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(dma.bus_master), "Mastering",
+ acpi_gbl_BMdecode},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(dma.transfer), "Transfer Type",
+ acpi_gbl_SIZdecode},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(dma.channel_count), "Channel Count",
+ NULL},
+ {ACPI_RSD_SHORTLIST, ACPI_RSD_OFFSET(dma.channels[0]), "Channel List",
+ NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_start_dpf[3] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_start_dpf),
+ "Start-Dependent-Functions", NULL},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(start_dpf.compatibility_priority),
+ "Compatibility Priority", acpi_gbl_config_decode},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(start_dpf.performance_robustness),
+ "Performance/Robustness", acpi_gbl_config_decode}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_end_dpf[1] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_end_dpf),
+ "End-Dependent-Functions", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_io[6] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_io), "I/O", NULL},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(io.io_decode), "Address Decoding",
+ acpi_gbl_io_decode},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(io.minimum), "Address Minimum", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(io.maximum), "Address Maximum", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(io.alignment), "Alignment", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(io.address_length), "Address Length",
+ NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_fixed_io[3] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_fixed_io),
+ "Fixed I/O", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(fixed_io.address), "Address", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(fixed_io.address_length),
+ "Address Length", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_vendor[3] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_vendor),
+ "Vendor Specific", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(vendor.byte_length), "Length", NULL},
+ {ACPI_RSD_LONGLIST, ACPI_RSD_OFFSET(vendor.byte_data[0]), "Vendor Data",
+ NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_end_tag[1] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_end_tag), "end_tag",
+ NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_memory24[6] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_memory24),
+ "24-Bit Memory Range", NULL},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(memory24.write_protect),
+ "Write Protect", acpi_gbl_RWdecode},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(memory24.minimum), "Address Minimum",
+ NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(memory24.maximum), "Address Maximum",
+ NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(memory24.alignment), "Alignment",
+ NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(memory24.address_length),
+ "Address Length", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_memory32[6] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_memory32),
+ "32-Bit Memory Range", NULL},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(memory32.write_protect),
+ "Write Protect", acpi_gbl_RWdecode},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(memory32.minimum), "Address Minimum",
+ NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(memory32.maximum), "Address Maximum",
+ NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(memory32.alignment), "Alignment",
+ NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(memory32.address_length),
+ "Address Length", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_fixed_memory32[4] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_fixed_memory32),
+ "32-Bit Fixed Memory Range", NULL},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(fixed_memory32.write_protect),
+ "Write Protect", acpi_gbl_RWdecode},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(fixed_memory32.address), "Address",
+ NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(fixed_memory32.address_length),
+ "Address Length", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_address16[8] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_address16),
+ "16-Bit WORD Address Space", NULL},
+ {ACPI_RSD_ADDRESS, 0, NULL, NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.granularity), "Granularity",
+ NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.minimum), "Address Minimum",
+ NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.maximum), "Address Maximum",
+ NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.translation_offset),
+ "Translation Offset", NULL},
+ {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(address16.address_length),
+ "Address Length", NULL},
+ {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(address16.resource_source), NULL, NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_address32[8] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_address32),
+ "32-Bit DWORD Address Space", NULL},
+ {ACPI_RSD_ADDRESS, 0, NULL, NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.granularity), "Granularity",
+ NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.minimum), "Address Minimum",
+ NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.maximum), "Address Maximum",
+ NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.translation_offset),
+ "Translation Offset", NULL},
+ {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(address32.address_length),
+ "Address Length", NULL},
+ {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(address32.resource_source), NULL, NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_address64[8] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_address64),
+ "64-Bit QWORD Address Space", NULL},
+ {ACPI_RSD_ADDRESS, 0, NULL, NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.granularity), "Granularity",
+ NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.minimum), "Address Minimum",
+ NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.maximum), "Address Maximum",
+ NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.translation_offset),
+ "Translation Offset", NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(address64.address_length),
+ "Address Length", NULL},
+ {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(address64.resource_source), NULL, NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_ext_address64[8] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_ext_address64),
+ "64-Bit Extended Address Space", NULL},
+ {ACPI_RSD_ADDRESS, 0, NULL, NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.granularity),
+ "Granularity", NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.minimum),
+ "Address Minimum", NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.maximum),
+ "Address Maximum", NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.translation_offset),
+ "Translation Offset", NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.address_length),
+ "Address Length", NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(ext_address64.type_specific),
+ "Type-Specific Attribute", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_ext_irq[8] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_ext_irq),
+ "Extended IRQ", NULL},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(extended_irq.producer_consumer),
+ "Type", acpi_gbl_consume_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(extended_irq.triggering),
+ "Triggering", acpi_gbl_HEdecode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(extended_irq.polarity), "Polarity",
+ acpi_gbl_LLdecode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(extended_irq.sharable), "Sharing",
+ acpi_gbl_SHRdecode},
+ {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(extended_irq.resource_source), NULL,
+ NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(extended_irq.interrupt_count),
+ "Interrupt Count", NULL},
+ {ACPI_RSD_DWORDLIST, ACPI_RSD_OFFSET(extended_irq.interrupts[0]),
+ "Interrupt List", NULL}
+};
+
+struct acpi_rsdump_info acpi_rs_dump_generic_reg[6] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_generic_reg),
+ "Generic Register", NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(generic_reg.space_id), "Space ID",
+ NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(generic_reg.bit_width), "Bit Width",
+ NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(generic_reg.bit_offset), "Bit Offset",
+ NULL},
+ {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(generic_reg.access_size),
+ "Access Size", NULL},
+ {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(generic_reg.address), "Address", NULL}
+};
+
+/*
+ * Tables used for common address descriptor flag fields
+ */
+static struct acpi_rsdump_info acpi_rs_dump_general_flags[5] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_general_flags), NULL,
+ NULL},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.producer_consumer),
+ "Consumer/Producer", acpi_gbl_consume_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.decode), "Address Decode",
+ acpi_gbl_DECdecode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.min_address_fixed),
+ "Min Relocatability", acpi_gbl_min_decode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.max_address_fixed),
+ "Max Relocatability", acpi_gbl_max_decode}
+};
+
+static struct acpi_rsdump_info acpi_rs_dump_memory_flags[5] = {
+ {ACPI_RSD_LITERAL, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_memory_flags),
+ "Resource Type", (void *)"Memory Range"},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.info.mem.write_protect),
+ "Write Protect", acpi_gbl_RWdecode},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(address.info.mem.caching),
+ "Caching", acpi_gbl_MEMdecode},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(address.info.mem.range_type),
+ "Range Type", acpi_gbl_MTPdecode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.info.mem.translation),
+ "Translation", acpi_gbl_TTPdecode}
+};
+
+static struct acpi_rsdump_info acpi_rs_dump_io_flags[4] = {
+ {ACPI_RSD_LITERAL, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_io_flags),
+ "Resource Type", (void *)"I/O Range"},
+ {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(address.info.io.range_type),
+ "Range Type", acpi_gbl_RNGdecode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.info.io.translation),
+ "Translation", acpi_gbl_TTPdecode},
+ {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(address.info.io.translation_type),
+ "Translation Type", acpi_gbl_TRSdecode}
+};
+
+/*
+ * Table used to dump _PRT contents
+ */
+static struct acpi_rsdump_info acpi_rs_dump_prt[5] = {
+ {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_prt), NULL, NULL},
+ {ACPI_RSD_UINT64, ACPI_PRT_OFFSET(address), "Address", NULL},
+ {ACPI_RSD_UINT32, ACPI_PRT_OFFSET(pin), "Pin", NULL},
+ {ACPI_RSD_STRING, ACPI_PRT_OFFSET(source[0]), "Source", NULL},
+ {ACPI_RSD_UINT32, ACPI_PRT_OFFSET(source_index), "Source Index", NULL}
+};
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_dump_descriptor
+ *
+ * PARAMETERS: Resource
*
* RETURN: None
*
- * DESCRIPTION: Prints out the various members of the Data structure type.
+ * DESCRIPTION:
*
******************************************************************************/
-static void acpi_rs_dump_irq(union acpi_resource_data *data)
+static void
+acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table)
{
- struct acpi_resource_irq *irq_data = (struct acpi_resource_irq *)data;
- u8 index = 0;
+ u8 *target = NULL;
+ u8 *previous_target;
+ char *name;
+ u8 count;
- ACPI_FUNCTION_ENTRY();
+ /* First table entry must contain the table length (# of table entries) */
- acpi_os_printf("IRQ Resource\n");
+ count = table->offset;
- acpi_os_printf(" %s Triggered\n",
- ACPI_LEVEL_SENSITIVE ==
- irq_data->edge_level ? "Level" : "Edge");
+ while (count) {
+ previous_target = target;
+ target = ACPI_ADD_PTR(u8, resource, table->offset);
+ name = table->name;
- acpi_os_printf(" Active %s\n",
- ACPI_ACTIVE_LOW ==
- irq_data->active_high_low ? "Low" : "High");
-
- acpi_os_printf(" %s\n",
- ACPI_SHARED ==
- irq_data->shared_exclusive ? "Shared" : "Exclusive");
-
- acpi_os_printf(" %X Interrupts ( ", irq_data->number_of_interrupts);
-
- for (index = 0; index < irq_data->number_of_interrupts; index++) {
- acpi_os_printf("%X ", irq_data->interrupts[index]);
- }
-
- acpi_os_printf(")\n");
- return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_dump_dma
- *
- * PARAMETERS: Data - pointer to the resource structure to dump.
- *
- * RETURN: None
- *
- * DESCRIPTION: Prints out the various members of the Data structure type.
- *
- ******************************************************************************/
-
-static void acpi_rs_dump_dma(union acpi_resource_data *data)
-{
- struct acpi_resource_dma *dma_data = (struct acpi_resource_dma *)data;
- u8 index = 0;
-
- ACPI_FUNCTION_ENTRY();
-
- acpi_os_printf("DMA Resource\n");
-
- switch (dma_data->type) {
- case ACPI_COMPATIBILITY:
- acpi_os_printf(" Compatibility mode\n");
- break;
-
- case ACPI_TYPE_A:
- acpi_os_printf(" Type A\n");
- break;
-
- case ACPI_TYPE_B:
- acpi_os_printf(" Type B\n");
- break;
-
- case ACPI_TYPE_F:
- acpi_os_printf(" Type F\n");
- break;
-
- default:
- acpi_os_printf(" Invalid DMA type\n");
- break;
- }
-
- acpi_os_printf(" %sBus Master\n",
- ACPI_BUS_MASTER == dma_data->bus_master ? "" : "Not a ");
-
- switch (dma_data->transfer) {
- case ACPI_TRANSFER_8:
- acpi_os_printf(" 8-bit only transfer\n");
- break;
-
- case ACPI_TRANSFER_8_16:
- acpi_os_printf(" 8 and 16-bit transfer\n");
- break;
-
- case ACPI_TRANSFER_16:
- acpi_os_printf(" 16 bit only transfer\n");
- break;
-
- default:
- acpi_os_printf(" Invalid transfer preference\n");
- break;
- }
-
- acpi_os_printf(" Number of Channels: %X ( ",
- dma_data->number_of_channels);
-
- for (index = 0; index < dma_data->number_of_channels; index++) {
- acpi_os_printf("%X ", dma_data->channels[index]);
- }
-
- acpi_os_printf(")\n");
- return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_dump_start_depend_fns
- *
- * PARAMETERS: Data - pointer to the resource structure to dump.
- *
- * RETURN: None
- *
- * DESCRIPTION: Prints out the various members of the Data structure type.
- *
- ******************************************************************************/
-
-static void acpi_rs_dump_start_depend_fns(union acpi_resource_data *data)
-{
- struct acpi_resource_start_dpf *sdf_data =
- (struct acpi_resource_start_dpf *)data;
-
- ACPI_FUNCTION_ENTRY();
-
- acpi_os_printf("Start Dependent Functions Resource\n");
-
- switch (sdf_data->compatibility_priority) {
- case ACPI_GOOD_CONFIGURATION:
- acpi_os_printf(" Good configuration\n");
- break;
-
- case ACPI_ACCEPTABLE_CONFIGURATION:
- acpi_os_printf(" Acceptable configuration\n");
- break;
-
- case ACPI_SUB_OPTIMAL_CONFIGURATION:
- acpi_os_printf(" Sub-optimal configuration\n");
- break;
-
- default:
- acpi_os_printf(" Invalid compatibility priority\n");
- break;
- }
-
- switch (sdf_data->performance_robustness) {
- case ACPI_GOOD_CONFIGURATION:
- acpi_os_printf(" Good configuration\n");
- break;
-
- case ACPI_ACCEPTABLE_CONFIGURATION:
- acpi_os_printf(" Acceptable configuration\n");
- break;
-
- case ACPI_SUB_OPTIMAL_CONFIGURATION:
- acpi_os_printf(" Sub-optimal configuration\n");
- break;
-
- default:
- acpi_os_printf(" Invalid performance robustness preference\n");
- break;
- }
-
- return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_dump_io
- *
- * PARAMETERS: Data - pointer to the resource structure to dump.
- *
- * RETURN: None
- *
- * DESCRIPTION: Prints out the various members of the Data structure type.
- *
- ******************************************************************************/
-
-static void acpi_rs_dump_io(union acpi_resource_data *data)
-{
- struct acpi_resource_io *io_data = (struct acpi_resource_io *)data;
-
- ACPI_FUNCTION_ENTRY();
-
- acpi_os_printf("Io Resource\n");
-
- acpi_os_printf(" %d bit decode\n",
- ACPI_DECODE_16 == io_data->io_decode ? 16 : 10);
-
- acpi_os_printf(" Range minimum base: %08X\n",
- io_data->min_base_address);
-
- acpi_os_printf(" Range maximum base: %08X\n",
- io_data->max_base_address);
-
- acpi_os_printf(" Alignment: %08X\n", io_data->alignment);
-
- acpi_os_printf(" Range Length: %08X\n", io_data->range_length);
-
- return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_dump_fixed_io
- *
- * PARAMETERS: Data - pointer to the resource structure to dump.
- *
- * RETURN: None
- *
- * DESCRIPTION: Prints out the various members of the Data structure type.
- *
- ******************************************************************************/
-
-static void acpi_rs_dump_fixed_io(union acpi_resource_data *data)
-{
- struct acpi_resource_fixed_io *fixed_io_data =
- (struct acpi_resource_fixed_io *)data;
-
- ACPI_FUNCTION_ENTRY();
-
- acpi_os_printf("Fixed Io Resource\n");
- acpi_os_printf(" Range base address: %08X",
- fixed_io_data->base_address);
-
- acpi_os_printf(" Range length: %08X", fixed_io_data->range_length);
-
- return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_dump_vendor_specific
- *
- * PARAMETERS: Data - pointer to the resource structure to dump.
- *
- * RETURN: None
- *
- * DESCRIPTION: Prints out the various members of the Data structure type.
- *
- ******************************************************************************/
-
-static void acpi_rs_dump_vendor_specific(union acpi_resource_data *data)
-{
- struct acpi_resource_vendor *vendor_data =
- (struct acpi_resource_vendor *)data;
- u16 index = 0;
-
- ACPI_FUNCTION_ENTRY();
-
- acpi_os_printf("Vendor Specific Resource\n");
-
- acpi_os_printf(" Length: %08X\n", vendor_data->length);
-
- for (index = 0; index < vendor_data->length; index++) {
- acpi_os_printf(" Byte %X: %08X\n",
- index, vendor_data->reserved[index]);
- }
-
- return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_dump_memory24
- *
- * PARAMETERS: Data - pointer to the resource structure to dump.
- *
- * RETURN: None
- *
- * DESCRIPTION: Prints out the various members of the Data structure type.
- *
- ******************************************************************************/
-
-static void acpi_rs_dump_memory24(union acpi_resource_data *data)
-{
- struct acpi_resource_mem24 *memory24_data =
- (struct acpi_resource_mem24 *)data;
-
- ACPI_FUNCTION_ENTRY();
-
- acpi_os_printf("24-Bit Memory Range Resource\n");
-
- acpi_os_printf(" Read%s\n",
- ACPI_READ_WRITE_MEMORY ==
- memory24_data->read_write_attribute ?
- "/Write" : " only");
-
- acpi_os_printf(" Range minimum base: %08X\n",
- memory24_data->min_base_address);
-
- acpi_os_printf(" Range maximum base: %08X\n",
- memory24_data->max_base_address);
-
- acpi_os_printf(" Alignment: %08X\n", memory24_data->alignment);
-
- acpi_os_printf(" Range length: %08X\n", memory24_data->range_length);
-
- return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_dump_memory32
- *
- * PARAMETERS: Data - pointer to the resource structure to dump.
- *
- * RETURN: None
- *
- * DESCRIPTION: Prints out the various members of the Data structure type.
- *
- ******************************************************************************/
-
-static void acpi_rs_dump_memory32(union acpi_resource_data *data)
-{
- struct acpi_resource_mem32 *memory32_data =
- (struct acpi_resource_mem32 *)data;
-
- ACPI_FUNCTION_ENTRY();
-
- acpi_os_printf("32-Bit Memory Range Resource\n");
-
- acpi_os_printf(" Read%s\n",
- ACPI_READ_WRITE_MEMORY ==
- memory32_data->read_write_attribute ?
- "/Write" : " only");
-
- acpi_os_printf(" Range minimum base: %08X\n",
- memory32_data->min_base_address);
-
- acpi_os_printf(" Range maximum base: %08X\n",
- memory32_data->max_base_address);
-
- acpi_os_printf(" Alignment: %08X\n", memory32_data->alignment);
-
- acpi_os_printf(" Range length: %08X\n", memory32_data->range_length);
-
- return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_dump_fixed_memory32
- *
- * PARAMETERS: Data - pointer to the resource structure to dump.
- *
- * RETURN:
- *
- * DESCRIPTION: Prints out the various members of the Data structure type.
- *
- ******************************************************************************/
-
-static void acpi_rs_dump_fixed_memory32(union acpi_resource_data *data)
-{
- struct acpi_resource_fixed_mem32 *fixed_memory32_data =
- (struct acpi_resource_fixed_mem32 *)data;
-
- ACPI_FUNCTION_ENTRY();
-
- acpi_os_printf("32-Bit Fixed Location Memory Range Resource\n");
-
- acpi_os_printf(" Read%s\n",
- ACPI_READ_WRITE_MEMORY ==
- fixed_memory32_data->
- read_write_attribute ? "/Write" : " Only");
-
- acpi_os_printf(" Range base address: %08X\n",
- fixed_memory32_data->range_base_address);
-
- acpi_os_printf(" Range length: %08X\n",
- fixed_memory32_data->range_length);
-
- return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_dump_address16
- *
- * PARAMETERS: Data - pointer to the resource structure to dump.
- *
- * RETURN: None
- *
- * DESCRIPTION: Prints out the various members of the Data structure type.
- *
- ******************************************************************************/
-
-static void acpi_rs_dump_address16(union acpi_resource_data *data)
-{
- struct acpi_resource_address16 *address16_data =
- (struct acpi_resource_address16 *)data;
-
- ACPI_FUNCTION_ENTRY();
-
- acpi_os_printf("16-Bit Address Space Resource\n");
- acpi_os_printf(" Resource Type: ");
-
- switch (address16_data->resource_type) {
- case ACPI_MEMORY_RANGE:
-
- acpi_os_printf("Memory Range\n");
-
- switch (address16_data->attribute.memory.cache_attribute) {
- case ACPI_NON_CACHEABLE_MEMORY:
- acpi_os_printf
- (" Type Specific: Noncacheable memory\n");
+ switch (table->opcode) {
+ case ACPI_RSD_TITLE:
+ /*
+ * Optional resource title
+ */
+ if (table->name) {
+ acpi_os_printf("%s Resource\n", name);
+ }
break;
- case ACPI_CACHABLE_MEMORY:
- acpi_os_printf(" Type Specific: Cacheable memory\n");
+ /* Strings */
+
+ case ACPI_RSD_LITERAL:
+ acpi_rs_out_string(name,
+ ACPI_CAST_PTR(char, table->pointer));
break;
- case ACPI_WRITE_COMBINING_MEMORY:
- acpi_os_printf
- (" Type Specific: Write-combining memory\n");
+ case ACPI_RSD_STRING:
+ acpi_rs_out_string(name, ACPI_CAST_PTR(char, target));
break;
- case ACPI_PREFETCHABLE_MEMORY:
- acpi_os_printf
- (" Type Specific: Prefetchable memory\n");
+ /* Data items, 8/16/32/64 bit */
+
+ case ACPI_RSD_UINT8:
+ acpi_rs_out_integer8(name, ACPI_GET8(target));
+ break;
+
+ case ACPI_RSD_UINT16:
+ acpi_rs_out_integer16(name, ACPI_GET16(target));
+ break;
+
+ case ACPI_RSD_UINT32:
+ acpi_rs_out_integer32(name, ACPI_GET32(target));
+ break;
+
+ case ACPI_RSD_UINT64:
+ acpi_rs_out_integer64(name, ACPI_GET64(target));
+ break;
+
+ /* Flags: 1-bit and 2-bit flags supported */
+
+ case ACPI_RSD_1BITFLAG:
+ acpi_rs_out_string(name, ACPI_CAST_PTR(char,
+ table->
+ pointer[*target &
+ 0x01]));
+ break;
+
+ case ACPI_RSD_2BITFLAG:
+ acpi_rs_out_string(name, ACPI_CAST_PTR(char,
+ table->
+ pointer[*target &
+ 0x03]));
+ break;
+
+ case ACPI_RSD_SHORTLIST:
+ /*
+ * Short byte list (single line output) for DMA and IRQ resources
+ * Note: The list length is obtained from the previous table entry
+ */
+ if (previous_target) {
+ acpi_rs_out_title(name);
+ acpi_rs_dump_short_byte_list(*previous_target,
+ target);
+ }
+ break;
+
+ case ACPI_RSD_LONGLIST:
+ /*
+ * Long byte list for Vendor resource data
+ * Note: The list length is obtained from the previous table entry
+ */
+ if (previous_target) {
+ acpi_rs_dump_byte_list(ACPI_GET16
+ (previous_target),
+ target);
+ }
+ break;
+
+ case ACPI_RSD_DWORDLIST:
+ /*
+ * Dword list for Extended Interrupt resources
+ * Note: The list length is obtained from the previous table entry
+ */
+ if (previous_target) {
+ acpi_rs_dump_dword_list(*previous_target,
+ ACPI_CAST_PTR(u32,
+ target));
+ }
+ break;
+
+ case ACPI_RSD_ADDRESS:
+ /*
+ * Common flags for all Address resources
+ */
+ acpi_rs_dump_address_common(ACPI_CAST_PTR
+ (union acpi_resource_data,
+ target));
+ break;
+
+ case ACPI_RSD_SOURCE:
+ /*
+ * Optional resource_source for Address resources
+ */
+ acpi_rs_dump_resource_source(ACPI_CAST_PTR
+ (struct
+ acpi_resource_source,
+ target));
break;
default:
- acpi_os_printf
- (" Type Specific: Invalid cache attribute\n");
- break;
+ acpi_os_printf("**** Invalid table opcode [%X] ****\n",
+ table->opcode);
+ return;
}
- acpi_os_printf(" Type Specific: Read%s\n",
- ACPI_READ_WRITE_MEMORY ==
- address16_data->attribute.memory.
- read_write_attribute ? "/Write" : " Only");
+ table++;
+ count--;
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_dump_resource_source
+ *
+ * PARAMETERS: resource_source - Pointer to a Resource Source struct
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Common routine for dumping the optional resource_source and the
+ * corresponding resource_source_index.
+ *
+ ******************************************************************************/
+
+static void
+acpi_rs_dump_resource_source(struct acpi_resource_source *resource_source)
+{
+ ACPI_FUNCTION_ENTRY();
+
+ if (resource_source->index == 0xFF) {
+ return;
+ }
+
+ acpi_rs_out_integer8("Resource Source Index", resource_source->index);
+
+ acpi_rs_out_string("Resource Source",
+ resource_source->string_ptr ?
+ resource_source->string_ptr : "[Not Specified]");
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_dump_address_common
+ *
+ * PARAMETERS: Resource - Pointer to an internal resource descriptor
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Dump the fields that are common to all Address resource
+ * descriptors
+ *
+ ******************************************************************************/
+
+static void acpi_rs_dump_address_common(union acpi_resource_data *resource)
+{
+ ACPI_FUNCTION_ENTRY();
+
+ /* Decode the type-specific flags */
+
+ switch (resource->address.resource_type) {
+ case ACPI_MEMORY_RANGE:
+
+ acpi_rs_dump_descriptor(resource, acpi_rs_dump_memory_flags);
break;
case ACPI_IO_RANGE:
- acpi_os_printf("I/O Range\n");
-
- switch (address16_data->attribute.io.range_attribute) {
- case ACPI_NON_ISA_ONLY_RANGES:
- acpi_os_printf
- (" Type Specific: Non-ISA Io Addresses\n");
- break;
-
- case ACPI_ISA_ONLY_RANGES:
- acpi_os_printf(" Type Specific: ISA Io Addresses\n");
- break;
-
- case ACPI_ENTIRE_RANGE:
- acpi_os_printf
- (" Type Specific: ISA and non-ISA Io Addresses\n");
- break;
-
- default:
- acpi_os_printf
- (" Type Specific: Invalid range attribute\n");
- break;
- }
-
- acpi_os_printf(" Type Specific: %s Translation\n",
- ACPI_SPARSE_TRANSLATION ==
- address16_data->attribute.io.
- translation_attribute ? "Sparse" : "Dense");
+ acpi_rs_dump_descriptor(resource, acpi_rs_dump_io_flags);
break;
case ACPI_BUS_NUMBER_RANGE:
- acpi_os_printf("Bus Number Range\n");
+ acpi_rs_out_string("Resource Type", "Bus Number Range");
break;
default:
- acpi_os_printf("0x%2.2X\n", address16_data->resource_type);
+ acpi_rs_out_integer8("Resource Type",
+ (u8) resource->address.resource_type);
break;
}
- acpi_os_printf(" Resource %s\n",
- ACPI_CONSUMER == address16_data->producer_consumer ?
- "Consumer" : "Producer");
+ /* Decode the general flags */
- acpi_os_printf(" %s decode\n",
- ACPI_SUB_DECODE == address16_data->decode ?
- "Subtractive" : "Positive");
-
- acpi_os_printf(" Min address is %s fixed\n",
- ACPI_ADDRESS_FIXED == address16_data->min_address_fixed ?
- "" : "not");
-
- acpi_os_printf(" Max address is %s fixed\n",
- ACPI_ADDRESS_FIXED == address16_data->max_address_fixed ?
- "" : "not");
-
- acpi_os_printf(" Granularity: %08X\n", address16_data->granularity);
-
- acpi_os_printf(" Address range min: %08X\n",
- address16_data->min_address_range);
-
- acpi_os_printf(" Address range max: %08X\n",
- address16_data->max_address_range);
-
- acpi_os_printf(" Address translation offset: %08X\n",
- address16_data->address_translation_offset);
-
- acpi_os_printf(" Address Length: %08X\n",
- address16_data->address_length);
-
- if (0xFF != address16_data->resource_source.index) {
- acpi_os_printf(" Resource Source Index: %X\n",
- address16_data->resource_source.index);
-
- acpi_os_printf(" Resource Source: %s\n",
- address16_data->resource_source.string_ptr);
- }
-
- return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_dump_address32
- *
- * PARAMETERS: Data - pointer to the resource structure to dump.
- *
- * RETURN: None
- *
- * DESCRIPTION: Prints out the various members of the Data structure type.
- *
- ******************************************************************************/
-
-static void acpi_rs_dump_address32(union acpi_resource_data *data)
-{
- struct acpi_resource_address32 *address32_data =
- (struct acpi_resource_address32 *)data;
-
- ACPI_FUNCTION_ENTRY();
-
- acpi_os_printf("32-Bit Address Space Resource\n");
-
- switch (address32_data->resource_type) {
- case ACPI_MEMORY_RANGE:
-
- acpi_os_printf(" Resource Type: Memory Range\n");
-
- switch (address32_data->attribute.memory.cache_attribute) {
- case ACPI_NON_CACHEABLE_MEMORY:
- acpi_os_printf
- (" Type Specific: Noncacheable memory\n");
- break;
-
- case ACPI_CACHABLE_MEMORY:
- acpi_os_printf(" Type Specific: Cacheable memory\n");
- break;
-
- case ACPI_WRITE_COMBINING_MEMORY:
- acpi_os_printf
- (" Type Specific: Write-combining memory\n");
- break;
-
- case ACPI_PREFETCHABLE_MEMORY:
- acpi_os_printf
- (" Type Specific: Prefetchable memory\n");
- break;
-
- default:
- acpi_os_printf
- (" Type Specific: Invalid cache attribute\n");
- break;
- }
-
- acpi_os_printf(" Type Specific: Read%s\n",
- ACPI_READ_WRITE_MEMORY ==
- address32_data->attribute.memory.
- read_write_attribute ? "/Write" : " Only");
- break;
-
- case ACPI_IO_RANGE:
-
- acpi_os_printf(" Resource Type: Io Range\n");
-
- switch (address32_data->attribute.io.range_attribute) {
- case ACPI_NON_ISA_ONLY_RANGES:
- acpi_os_printf
- (" Type Specific: Non-ISA Io Addresses\n");
- break;
-
- case ACPI_ISA_ONLY_RANGES:
- acpi_os_printf(" Type Specific: ISA Io Addresses\n");
- break;
-
- case ACPI_ENTIRE_RANGE:
- acpi_os_printf
- (" Type Specific: ISA and non-ISA Io Addresses\n");
- break;
-
- default:
- acpi_os_printf
- (" Type Specific: Invalid Range attribute");
- break;
- }
-
- acpi_os_printf(" Type Specific: %s Translation\n",
- ACPI_SPARSE_TRANSLATION ==
- address32_data->attribute.io.
- translation_attribute ? "Sparse" : "Dense");
- break;
-
- case ACPI_BUS_NUMBER_RANGE:
-
- acpi_os_printf(" Resource Type: Bus Number Range\n");
- break;
-
- default:
-
- acpi_os_printf(" Resource Type: 0x%2.2X\n",
- address32_data->resource_type);
- break;
- }
-
- acpi_os_printf(" Resource %s\n",
- ACPI_CONSUMER == address32_data->producer_consumer ?
- "Consumer" : "Producer");
-
- acpi_os_printf(" %s decode\n",
- ACPI_SUB_DECODE == address32_data->decode ?
- "Subtractive" : "Positive");
-
- acpi_os_printf(" Min address is %s fixed\n",
- ACPI_ADDRESS_FIXED == address32_data->min_address_fixed ?
- "" : "not ");
-
- acpi_os_printf(" Max address is %s fixed\n",
- ACPI_ADDRESS_FIXED == address32_data->max_address_fixed ?
- "" : "not ");
-
- acpi_os_printf(" Granularity: %08X\n", address32_data->granularity);
-
- acpi_os_printf(" Address range min: %08X\n",
- address32_data->min_address_range);
-
- acpi_os_printf(" Address range max: %08X\n",
- address32_data->max_address_range);
-
- acpi_os_printf(" Address translation offset: %08X\n",
- address32_data->address_translation_offset);
-
- acpi_os_printf(" Address Length: %08X\n",
- address32_data->address_length);
-
- if (0xFF != address32_data->resource_source.index) {
- acpi_os_printf(" Resource Source Index: %X\n",
- address32_data->resource_source.index);
-
- acpi_os_printf(" Resource Source: %s\n",
- address32_data->resource_source.string_ptr);
- }
-
- return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_dump_address64
- *
- * PARAMETERS: Data - pointer to the resource structure to dump.
- *
- * RETURN: None
- *
- * DESCRIPTION: Prints out the various members of the Data structure type.
- *
- ******************************************************************************/
-
-static void acpi_rs_dump_address64(union acpi_resource_data *data)
-{
- struct acpi_resource_address64 *address64_data =
- (struct acpi_resource_address64 *)data;
-
- ACPI_FUNCTION_ENTRY();
-
- acpi_os_printf("64-Bit Address Space Resource\n");
-
- switch (address64_data->resource_type) {
- case ACPI_MEMORY_RANGE:
-
- acpi_os_printf(" Resource Type: Memory Range\n");
-
- switch (address64_data->attribute.memory.cache_attribute) {
- case ACPI_NON_CACHEABLE_MEMORY:
- acpi_os_printf
- (" Type Specific: Noncacheable memory\n");
- break;
-
- case ACPI_CACHABLE_MEMORY:
- acpi_os_printf(" Type Specific: Cacheable memory\n");
- break;
-
- case ACPI_WRITE_COMBINING_MEMORY:
- acpi_os_printf
- (" Type Specific: Write-combining memory\n");
- break;
-
- case ACPI_PREFETCHABLE_MEMORY:
- acpi_os_printf
- (" Type Specific: Prefetchable memory\n");
- break;
-
- default:
- acpi_os_printf
- (" Type Specific: Invalid cache attribute\n");
- break;
- }
-
- acpi_os_printf(" Type Specific: Read%s\n",
- ACPI_READ_WRITE_MEMORY ==
- address64_data->attribute.memory.
- read_write_attribute ? "/Write" : " Only");
- break;
-
- case ACPI_IO_RANGE:
-
- acpi_os_printf(" Resource Type: Io Range\n");
-
- switch (address64_data->attribute.io.range_attribute) {
- case ACPI_NON_ISA_ONLY_RANGES:
- acpi_os_printf
- (" Type Specific: Non-ISA Io Addresses\n");
- break;
-
- case ACPI_ISA_ONLY_RANGES:
- acpi_os_printf(" Type Specific: ISA Io Addresses\n");
- break;
-
- case ACPI_ENTIRE_RANGE:
- acpi_os_printf
- (" Type Specific: ISA and non-ISA Io Addresses\n");
- break;
-
- default:
- acpi_os_printf
- (" Type Specific: Invalid Range attribute");
- break;
- }
-
- acpi_os_printf(" Type Specific: %s Translation\n",
- ACPI_SPARSE_TRANSLATION ==
- address64_data->attribute.io.
- translation_attribute ? "Sparse" : "Dense");
- break;
-
- case ACPI_BUS_NUMBER_RANGE:
-
- acpi_os_printf(" Resource Type: Bus Number Range\n");
- break;
-
- default:
-
- acpi_os_printf(" Resource Type: 0x%2.2X\n",
- address64_data->resource_type);
- break;
- }
-
- acpi_os_printf(" Resource %s\n",
- ACPI_CONSUMER == address64_data->producer_consumer ?
- "Consumer" : "Producer");
-
- acpi_os_printf(" %s decode\n",
- ACPI_SUB_DECODE == address64_data->decode ?
- "Subtractive" : "Positive");
-
- acpi_os_printf(" Min address is %s fixed\n",
- ACPI_ADDRESS_FIXED == address64_data->min_address_fixed ?
- "" : "not ");
-
- acpi_os_printf(" Max address is %s fixed\n",
- ACPI_ADDRESS_FIXED == address64_data->max_address_fixed ?
- "" : "not ");
-
- acpi_os_printf(" Granularity: %8.8X%8.8X\n",
- ACPI_FORMAT_UINT64(address64_data->granularity));
-
- acpi_os_printf(" Address range min: %8.8X%8.8X\n",
- ACPI_FORMAT_UINT64(address64_data->min_address_range));
-
- acpi_os_printf(" Address range max: %8.8X%8.8X\n",
- ACPI_FORMAT_UINT64(address64_data->max_address_range));
-
- acpi_os_printf(" Address translation offset: %8.8X%8.8X\n",
- ACPI_FORMAT_UINT64(address64_data->
- address_translation_offset));
-
- acpi_os_printf(" Address Length: %8.8X%8.8X\n",
- ACPI_FORMAT_UINT64(address64_data->address_length));
-
- acpi_os_printf(" Type Specific Attributes: %8.8X%8.8X\n",
- ACPI_FORMAT_UINT64(address64_data->
- type_specific_attributes));
-
- if (0xFF != address64_data->resource_source.index) {
- acpi_os_printf(" Resource Source Index: %X\n",
- address64_data->resource_source.index);
-
- acpi_os_printf(" Resource Source: %s\n",
- address64_data->resource_source.string_ptr);
- }
-
- return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_dump_extended_irq
- *
- * PARAMETERS: Data - pointer to the resource structure to dump.
- *
- * RETURN: None
- *
- * DESCRIPTION: Prints out the various members of the Data structure type.
- *
- ******************************************************************************/
-
-static void acpi_rs_dump_extended_irq(union acpi_resource_data *data)
-{
- struct acpi_resource_ext_irq *ext_irq_data =
- (struct acpi_resource_ext_irq *)data;
- u8 index = 0;
-
- ACPI_FUNCTION_ENTRY();
-
- acpi_os_printf("Extended IRQ Resource\n");
-
- acpi_os_printf(" Resource %s\n",
- ACPI_CONSUMER == ext_irq_data->producer_consumer ?
- "Consumer" : "Producer");
-
- acpi_os_printf(" %s\n",
- ACPI_LEVEL_SENSITIVE == ext_irq_data->edge_level ?
- "Level" : "Edge");
-
- acpi_os_printf(" Active %s\n",
- ACPI_ACTIVE_LOW == ext_irq_data->active_high_low ?
- "low" : "high");
-
- acpi_os_printf(" %s\n",
- ACPI_SHARED == ext_irq_data->shared_exclusive ?
- "Shared" : "Exclusive");
-
- acpi_os_printf(" Interrupts : %X ( ",
- ext_irq_data->number_of_interrupts);
-
- for (index = 0; index < ext_irq_data->number_of_interrupts; index++) {
- acpi_os_printf("%X ", ext_irq_data->interrupts[index]);
- }
-
- acpi_os_printf(")\n");
-
- if (0xFF != ext_irq_data->resource_source.index) {
- acpi_os_printf(" Resource Source Index: %X",
- ext_irq_data->resource_source.index);
-
- acpi_os_printf(" Resource Source: %s",
- ext_irq_data->resource_source.string_ptr);
- }
-
- return;
+ acpi_rs_dump_descriptor(resource, acpi_rs_dump_general_flags);
}
/*******************************************************************************
*
* FUNCTION: acpi_rs_dump_resource_list
*
- * PARAMETERS: Resource - pointer to the resource structure to dump.
+ * PARAMETERS: resource_list - Pointer to a resource descriptor list
*
* RETURN: None
*
@@ -964,148 +594,175 @@
*
******************************************************************************/
-void acpi_rs_dump_resource_list(struct acpi_resource *resource)
+void acpi_rs_dump_resource_list(struct acpi_resource *resource_list)
{
- u8 count = 0;
- u8 done = FALSE;
+ u32 count = 0;
+ u32 type;
ACPI_FUNCTION_ENTRY();
- if (acpi_dbg_level & ACPI_LV_RESOURCES && _COMPONENT & acpi_dbg_layer) {
- while (!done) {
- acpi_os_printf("Resource structure %X.\n", count++);
-
- switch (resource->id) {
- case ACPI_RSTYPE_IRQ:
- acpi_rs_dump_irq(&resource->data);
- break;
-
- case ACPI_RSTYPE_DMA:
- acpi_rs_dump_dma(&resource->data);
- break;
-
- case ACPI_RSTYPE_START_DPF:
- acpi_rs_dump_start_depend_fns(&resource->data);
- break;
-
- case ACPI_RSTYPE_END_DPF:
- acpi_os_printf
- ("end_dependent_functions Resource\n");
- /* acpi_rs_dump_end_dependent_functions (Resource->Data); */
- break;
-
- case ACPI_RSTYPE_IO:
- acpi_rs_dump_io(&resource->data);
- break;
-
- case ACPI_RSTYPE_FIXED_IO:
- acpi_rs_dump_fixed_io(&resource->data);
- break;
-
- case ACPI_RSTYPE_VENDOR:
- acpi_rs_dump_vendor_specific(&resource->data);
- break;
-
- case ACPI_RSTYPE_END_TAG:
- /*rs_dump_end_tag (Resource->Data); */
- acpi_os_printf("end_tag Resource\n");
- done = TRUE;
- break;
-
- case ACPI_RSTYPE_MEM24:
- acpi_rs_dump_memory24(&resource->data);
- break;
-
- case ACPI_RSTYPE_MEM32:
- acpi_rs_dump_memory32(&resource->data);
- break;
-
- case ACPI_RSTYPE_FIXED_MEM32:
- acpi_rs_dump_fixed_memory32(&resource->data);
- break;
-
- case ACPI_RSTYPE_ADDRESS16:
- acpi_rs_dump_address16(&resource->data);
- break;
-
- case ACPI_RSTYPE_ADDRESS32:
- acpi_rs_dump_address32(&resource->data);
- break;
-
- case ACPI_RSTYPE_ADDRESS64:
- acpi_rs_dump_address64(&resource->data);
- break;
-
- case ACPI_RSTYPE_EXT_IRQ:
- acpi_rs_dump_extended_irq(&resource->data);
- break;
-
- default:
- acpi_os_printf("Invalid resource type\n");
- break;
-
- }
-
- resource =
- ACPI_PTR_ADD(struct acpi_resource, resource,
- resource->length);
- }
+ if (!(acpi_dbg_level & ACPI_LV_RESOURCES)
+ || !(_COMPONENT & acpi_dbg_layer)) {
+ return;
}
- return;
+ /* Walk list and dump all resource descriptors (END_TAG terminates) */
+
+ do {
+ acpi_os_printf("\n[%02X] ", count);
+ count++;
+
+ /* Validate Type before dispatch */
+
+ type = resource_list->type;
+ if (type > ACPI_RESOURCE_TYPE_MAX) {
+ acpi_os_printf
+ ("Invalid descriptor type (%X) in resource list\n",
+ resource_list->type);
+ return;
+ }
+
+ /* Dump the resource descriptor */
+
+ acpi_rs_dump_descriptor(&resource_list->data,
+ acpi_gbl_dump_resource_dispatch[type]);
+
+ /* Point to the next resource structure */
+
+ resource_list =
+ ACPI_ADD_PTR(struct acpi_resource, resource_list,
+ resource_list->length);
+
+ /* Exit when END_TAG descriptor is reached */
+
+ } while (type != ACPI_RESOURCE_TYPE_END_TAG);
}
/*******************************************************************************
*
* FUNCTION: acpi_rs_dump_irq_list
*
- * PARAMETERS: route_table - pointer to the routing table to dump.
+ * PARAMETERS: route_table - Pointer to the routing table to dump.
*
* RETURN: None
*
- * DESCRIPTION: Dispatches the structures to the correct dump routine.
+ * DESCRIPTION: Print IRQ routing table
*
******************************************************************************/
void acpi_rs_dump_irq_list(u8 * route_table)
{
- u8 *buffer = route_table;
- u8 count = 0;
- u8 done = FALSE;
struct acpi_pci_routing_table *prt_element;
+ u8 count;
ACPI_FUNCTION_ENTRY();
- if (acpi_dbg_level & ACPI_LV_RESOURCES && _COMPONENT & acpi_dbg_layer) {
- prt_element =
- ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer);
-
- while (!done) {
- acpi_os_printf("PCI IRQ Routing Table structure %X.\n",
- count++);
-
- acpi_os_printf(" Address: %8.8X%8.8X\n",
- ACPI_FORMAT_UINT64(prt_element->
- address));
-
- acpi_os_printf(" Pin: %X\n", prt_element->pin);
-
- acpi_os_printf(" Source: %s\n", prt_element->source);
-
- acpi_os_printf(" source_index: %X\n",
- prt_element->source_index);
-
- buffer += prt_element->length;
- prt_element =
- ACPI_CAST_PTR(struct acpi_pci_routing_table,
- buffer);
- if (0 == prt_element->length) {
- done = TRUE;
- }
- }
+ if (!(acpi_dbg_level & ACPI_LV_RESOURCES)
+ || !(_COMPONENT & acpi_dbg_layer)) {
+ return;
}
- return;
+ prt_element = ACPI_CAST_PTR(struct acpi_pci_routing_table, route_table);
+
+ /* Dump all table elements, Exit on zero length element */
+
+ for (count = 0; prt_element->length; count++) {
+ acpi_os_printf("\n[%02X] PCI IRQ Routing Table Package\n",
+ count);
+ acpi_rs_dump_descriptor(prt_element, acpi_rs_dump_prt);
+
+ prt_element = ACPI_ADD_PTR(struct acpi_pci_routing_table,
+ prt_element, prt_element->length);
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_out*
+ *
+ * PARAMETERS: Title - Name of the resource field
+ * Value - Value of the resource field
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Miscellaneous helper functions to consistently format the
+ * output of the resource dump routines
+ *
+ ******************************************************************************/
+
+static void acpi_rs_out_string(char *title, char *value)
+{
+ acpi_os_printf("%27s : %s", title, value);
+ if (!*value) {
+ acpi_os_printf("[NULL NAMESTRING]");
+ }
+ acpi_os_printf("\n");
+}
+
+static void acpi_rs_out_integer8(char *title, u8 value)
+{
+ acpi_os_printf("%27s : %2.2X\n", title, value);
+}
+
+static void acpi_rs_out_integer16(char *title, u16 value)
+{
+ acpi_os_printf("%27s : %4.4X\n", title, value);
+}
+
+static void acpi_rs_out_integer32(char *title, u32 value)
+{
+ acpi_os_printf("%27s : %8.8X\n", title, value);
+}
+
+static void acpi_rs_out_integer64(char *title, u64 value)
+{
+ acpi_os_printf("%27s : %8.8X%8.8X\n", title, ACPI_FORMAT_UINT64(value));
+}
+
+static void acpi_rs_out_title(char *title)
+{
+ acpi_os_printf("%27s : ", title);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_dump*List
+ *
+ * PARAMETERS: Length - Number of elements in the list
+ * Data - Start of the list
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Miscellaneous functions to dump lists of raw data
+ *
+ ******************************************************************************/
+
+static void acpi_rs_dump_byte_list(u16 length, u8 * data)
+{
+ u8 i;
+
+ for (i = 0; i < length; i++) {
+ acpi_os_printf("%25s%2.2X : %2.2X\n", "Byte", i, data[i]);
+ }
+}
+
+static void acpi_rs_dump_short_byte_list(u8 length, u8 * data)
+{
+ u8 i;
+
+ for (i = 0; i < length; i++) {
+ acpi_os_printf("%X ", data[i]);
+ }
+ acpi_os_printf("\n");
+}
+
+static void acpi_rs_dump_dword_list(u8 length, u32 * data)
+{
+ u8 i;
+
+ for (i = 0; i < length; i++) {
+ acpi_os_printf("%25s%2.2X : %8.8X\n", "Dword", i, data[i]);
+ }
}
#endif
diff --git a/drivers/acpi/resources/rsinfo.c b/drivers/acpi/resources/rsinfo.c
new file mode 100644
index 0000000..d9ae64b
--- /dev/null
+++ b/drivers/acpi/resources/rsinfo.c
@@ -0,0 +1,204 @@
+/*******************************************************************************
+ *
+ * Module Name: rsinfo - Dispatch and Info tables
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2006, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include <acpi/acresrc.h>
+
+#define _COMPONENT ACPI_RESOURCES
+ACPI_MODULE_NAME("rsinfo")
+
+/*
+ * Resource dispatch and information tables. Any new resource types (either
+ * Large or Small) must be reflected in each of these tables, so they are here
+ * in one place.
+ *
+ * The tables for Large descriptors are indexed by bits 6:0 of the AML
+ * descriptor type byte. The tables for Small descriptors are indexed by
+ * bits 6:3 of the descriptor byte. The tables for internal resource
+ * descriptors are indexed by the acpi_resource_type field.
+ */
+/* Dispatch table for resource-to-AML (Set Resource) conversion functions */
+struct acpi_rsconvert_info *acpi_gbl_set_resource_dispatch[] = {
+ acpi_rs_set_irq, /* 0x00, ACPI_RESOURCE_TYPE_IRQ */
+ acpi_rs_convert_dma, /* 0x01, ACPI_RESOURCE_TYPE_DMA */
+ acpi_rs_set_start_dpf, /* 0x02, ACPI_RESOURCE_TYPE_START_DEPENDENT */
+ acpi_rs_convert_end_dpf, /* 0x03, ACPI_RESOURCE_TYPE_END_DEPENDENT */
+ acpi_rs_convert_io, /* 0x04, ACPI_RESOURCE_TYPE_IO */
+ acpi_rs_convert_fixed_io, /* 0x05, ACPI_RESOURCE_TYPE_FIXED_IO */
+ acpi_rs_set_vendor, /* 0x06, ACPI_RESOURCE_TYPE_VENDOR */
+ acpi_rs_convert_end_tag, /* 0x07, ACPI_RESOURCE_TYPE_END_TAG */
+ acpi_rs_convert_memory24, /* 0x08, ACPI_RESOURCE_TYPE_MEMORY24 */
+ acpi_rs_convert_memory32, /* 0x09, ACPI_RESOURCE_TYPE_MEMORY32 */
+ acpi_rs_convert_fixed_memory32, /* 0x0A, ACPI_RESOURCE_TYPE_FIXED_MEMORY32 */
+ acpi_rs_convert_address16, /* 0x0B, ACPI_RESOURCE_TYPE_ADDRESS16 */
+ acpi_rs_convert_address32, /* 0x0C, ACPI_RESOURCE_TYPE_ADDRESS32 */
+ acpi_rs_convert_address64, /* 0x0D, ACPI_RESOURCE_TYPE_ADDRESS64 */
+ acpi_rs_convert_ext_address64, /* 0x0E, ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64 */
+ acpi_rs_convert_ext_irq, /* 0x0F, ACPI_RESOURCE_TYPE_EXTENDED_IRQ */
+ acpi_rs_convert_generic_reg /* 0x10, ACPI_RESOURCE_TYPE_GENERIC_REGISTER */
+};
+
+/* Dispatch tables for AML-to-resource (Get Resource) conversion functions */
+
+struct acpi_rsconvert_info *acpi_gbl_get_resource_dispatch[] = {
+ /* Small descriptors */
+
+ NULL, /* 0x00, Reserved */
+ NULL, /* 0x01, Reserved */
+ NULL, /* 0x02, Reserved */
+ NULL, /* 0x03, Reserved */
+ acpi_rs_get_irq, /* 0x04, ACPI_RESOURCE_NAME_IRQ */
+ acpi_rs_convert_dma, /* 0x05, ACPI_RESOURCE_NAME_DMA */
+ acpi_rs_get_start_dpf, /* 0x06, ACPI_RESOURCE_NAME_START_DEPENDENT */
+ acpi_rs_convert_end_dpf, /* 0x07, ACPI_RESOURCE_NAME_END_DEPENDENT */
+ acpi_rs_convert_io, /* 0x08, ACPI_RESOURCE_NAME_IO */
+ acpi_rs_convert_fixed_io, /* 0x09, ACPI_RESOURCE_NAME_FIXED_IO */
+ NULL, /* 0x0A, Reserved */
+ NULL, /* 0x0B, Reserved */
+ NULL, /* 0x0C, Reserved */
+ NULL, /* 0x0D, Reserved */
+ acpi_rs_get_vendor_small, /* 0x0E, ACPI_RESOURCE_NAME_VENDOR_SMALL */
+ acpi_rs_convert_end_tag, /* 0x0F, ACPI_RESOURCE_NAME_END_TAG */
+
+ /* Large descriptors */
+
+ NULL, /* 0x00, Reserved */
+ acpi_rs_convert_memory24, /* 0x01, ACPI_RESOURCE_NAME_MEMORY24 */
+ acpi_rs_convert_generic_reg, /* 0x02, ACPI_RESOURCE_NAME_GENERIC_REGISTER */
+ NULL, /* 0x03, Reserved */
+ acpi_rs_get_vendor_large, /* 0x04, ACPI_RESOURCE_NAME_VENDOR_LARGE */
+ acpi_rs_convert_memory32, /* 0x05, ACPI_RESOURCE_NAME_MEMORY32 */
+ acpi_rs_convert_fixed_memory32, /* 0x06, ACPI_RESOURCE_NAME_FIXED_MEMORY32 */
+ acpi_rs_convert_address32, /* 0x07, ACPI_RESOURCE_NAME_ADDRESS32 */
+ acpi_rs_convert_address16, /* 0x08, ACPI_RESOURCE_NAME_ADDRESS16 */
+ acpi_rs_convert_ext_irq, /* 0x09, ACPI_RESOURCE_NAME_EXTENDED_IRQ */
+ acpi_rs_convert_address64, /* 0x0A, ACPI_RESOURCE_NAME_ADDRESS64 */
+ acpi_rs_convert_ext_address64 /* 0x0B, ACPI_RESOURCE_NAME_EXTENDED_ADDRESS64 */
+};
+
+#ifdef ACPI_FUTURE_USAGE
+#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
+
+/* Dispatch table for resource dump functions */
+
+struct acpi_rsdump_info *acpi_gbl_dump_resource_dispatch[] = {
+ acpi_rs_dump_irq, /* ACPI_RESOURCE_TYPE_IRQ */
+ acpi_rs_dump_dma, /* ACPI_RESOURCE_TYPE_DMA */
+ acpi_rs_dump_start_dpf, /* ACPI_RESOURCE_TYPE_START_DEPENDENT */
+ acpi_rs_dump_end_dpf, /* ACPI_RESOURCE_TYPE_END_DEPENDENT */
+ acpi_rs_dump_io, /* ACPI_RESOURCE_TYPE_IO */
+ acpi_rs_dump_fixed_io, /* ACPI_RESOURCE_TYPE_FIXED_IO */
+ acpi_rs_dump_vendor, /* ACPI_RESOURCE_TYPE_VENDOR */
+ acpi_rs_dump_end_tag, /* ACPI_RESOURCE_TYPE_END_TAG */
+ acpi_rs_dump_memory24, /* ACPI_RESOURCE_TYPE_MEMORY24 */
+ acpi_rs_dump_memory32, /* ACPI_RESOURCE_TYPE_MEMORY32 */
+ acpi_rs_dump_fixed_memory32, /* ACPI_RESOURCE_TYPE_FIXED_MEMORY32 */
+ acpi_rs_dump_address16, /* ACPI_RESOURCE_TYPE_ADDRESS16 */
+ acpi_rs_dump_address32, /* ACPI_RESOURCE_TYPE_ADDRESS32 */
+ acpi_rs_dump_address64, /* ACPI_RESOURCE_TYPE_ADDRESS64 */
+ acpi_rs_dump_ext_address64, /* ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64 */
+ acpi_rs_dump_ext_irq, /* ACPI_RESOURCE_TYPE_EXTENDED_IRQ */
+ acpi_rs_dump_generic_reg, /* ACPI_RESOURCE_TYPE_GENERIC_REGISTER */
+};
+#endif
+#endif /* ACPI_FUTURE_USAGE */
+/*
+ * Base sizes for external AML resource descriptors, indexed by internal type.
+ * Includes size of the descriptor header (1 byte for small descriptors,
+ * 3 bytes for large descriptors)
+ */
+const u8 acpi_gbl_aml_resource_sizes[] = {
+ sizeof(struct aml_resource_irq), /* ACPI_RESOURCE_TYPE_IRQ (optional Byte 3 always created) */
+ sizeof(struct aml_resource_dma), /* ACPI_RESOURCE_TYPE_DMA */
+ sizeof(struct aml_resource_start_dependent), /* ACPI_RESOURCE_TYPE_START_DEPENDENT (optional Byte 1 always created) */
+ sizeof(struct aml_resource_end_dependent), /* ACPI_RESOURCE_TYPE_END_DEPENDENT */
+ sizeof(struct aml_resource_io), /* ACPI_RESOURCE_TYPE_IO */
+ sizeof(struct aml_resource_fixed_io), /* ACPI_RESOURCE_TYPE_FIXED_IO */
+ sizeof(struct aml_resource_vendor_small), /* ACPI_RESOURCE_TYPE_VENDOR */
+ sizeof(struct aml_resource_end_tag), /* ACPI_RESOURCE_TYPE_END_TAG */
+ sizeof(struct aml_resource_memory24), /* ACPI_RESOURCE_TYPE_MEMORY24 */
+ sizeof(struct aml_resource_memory32), /* ACPI_RESOURCE_TYPE_MEMORY32 */
+ sizeof(struct aml_resource_fixed_memory32), /* ACPI_RESOURCE_TYPE_FIXED_MEMORY32 */
+ sizeof(struct aml_resource_address16), /* ACPI_RESOURCE_TYPE_ADDRESS16 */
+ sizeof(struct aml_resource_address32), /* ACPI_RESOURCE_TYPE_ADDRESS32 */
+ sizeof(struct aml_resource_address64), /* ACPI_RESOURCE_TYPE_ADDRESS64 */
+ sizeof(struct aml_resource_extended_address64), /*ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64 */
+ sizeof(struct aml_resource_extended_irq), /* ACPI_RESOURCE_TYPE_EXTENDED_IRQ */
+ sizeof(struct aml_resource_generic_register) /* ACPI_RESOURCE_TYPE_GENERIC_REGISTER */
+};
+
+const u8 acpi_gbl_resource_struct_sizes[] = {
+ /* Small descriptors */
+
+ 0,
+ 0,
+ 0,
+ 0,
+ ACPI_RS_SIZE(struct acpi_resource_irq),
+ ACPI_RS_SIZE(struct acpi_resource_dma),
+ ACPI_RS_SIZE(struct acpi_resource_start_dependent),
+ ACPI_RS_SIZE_MIN,
+ ACPI_RS_SIZE(struct acpi_resource_io),
+ ACPI_RS_SIZE(struct acpi_resource_fixed_io),
+ 0,
+ 0,
+ 0,
+ 0,
+ ACPI_RS_SIZE(struct acpi_resource_vendor),
+ ACPI_RS_SIZE_MIN,
+
+ /* Large descriptors */
+
+ 0,
+ ACPI_RS_SIZE(struct acpi_resource_memory24),
+ ACPI_RS_SIZE(struct acpi_resource_generic_register),
+ 0,
+ ACPI_RS_SIZE(struct acpi_resource_vendor),
+ ACPI_RS_SIZE(struct acpi_resource_memory32),
+ ACPI_RS_SIZE(struct acpi_resource_fixed_memory32),
+ ACPI_RS_SIZE(struct acpi_resource_address32),
+ ACPI_RS_SIZE(struct acpi_resource_address16),
+ ACPI_RS_SIZE(struct acpi_resource_extended_irq),
+ ACPI_RS_SIZE(struct acpi_resource_address64),
+ ACPI_RS_SIZE(struct acpi_resource_extended_address64)
+};
diff --git a/drivers/acpi/resources/rsio.c b/drivers/acpi/resources/rsio.c
index d53bbe8..ea56716 100644
--- a/drivers/acpi/resources/rsio.c
+++ b/drivers/acpi/resources/rsio.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -49,428 +49,206 @@
/*******************************************************************************
*
- * FUNCTION: acpi_rs_io_resource
- *
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
+ * acpi_rs_convert_io
*
******************************************************************************/
-acpi_status
-acpi_rs_io_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size)
-{
- u8 *buffer = byte_stream_buffer;
- struct acpi_resource *output_struct = (void *)*output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
- acpi_size struct_size = ACPI_SIZEOF_RESOURCE(struct acpi_resource_io);
+struct acpi_rsconvert_info acpi_rs_convert_io[5] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_IO,
+ ACPI_RS_SIZE(struct acpi_resource_io),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_io)},
- ACPI_FUNCTION_TRACE("rs_io_resource");
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_IO,
+ sizeof(struct aml_resource_io),
+ 0},
- /* The number of bytes consumed are Constant */
+ /* Decode flag */
- *bytes_consumed = 8;
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.io.io_decode),
+ AML_OFFSET(io.flags),
+ 0},
+ /*
+ * These fields are contiguous in both the source and destination:
+ * Address Alignment
+ * Length
+ * Minimum Base Address
+ * Maximum Base Address
+ */
+ {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.io.alignment),
+ AML_OFFSET(io.alignment),
+ 2},
- output_struct->id = ACPI_RSTYPE_IO;
-
- /* Check Decode */
-
- buffer += 1;
- temp8 = *buffer;
-
- output_struct->data.io.io_decode = temp8 & 0x01;
-
- /* Check min_base Address */
-
- buffer += 1;
- ACPI_MOVE_16_TO_16(&temp16, buffer);
-
- output_struct->data.io.min_base_address = temp16;
-
- /* Check max_base Address */
-
- buffer += 2;
- ACPI_MOVE_16_TO_16(&temp16, buffer);
-
- output_struct->data.io.max_base_address = temp16;
-
- /* Check Base alignment */
-
- buffer += 2;
- temp8 = *buffer;
-
- output_struct->data.io.alignment = temp8;
-
- /* Check range_length */
-
- buffer += 1;
- temp8 = *buffer;
-
- output_struct->data.io.range_length = temp8;
-
- /* Set the Length parameter */
-
- output_struct->length = (u32) struct_size;
-
- /* Return the final size of the structure */
-
- *structure_size = struct_size;
- return_ACPI_STATUS(AE_OK);
-}
+ {ACPI_RSC_MOVE16, ACPI_RS_OFFSET(data.io.minimum),
+ AML_OFFSET(io.minimum),
+ 2}
+};
/*******************************************************************************
*
- * FUNCTION: acpi_rs_fixed_io_resource
- *
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
+ * acpi_rs_convert_fixed_io
*
******************************************************************************/
-acpi_status
-acpi_rs_fixed_io_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size)
-{
- u8 *buffer = byte_stream_buffer;
- struct acpi_resource *output_struct = (void *)*output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
- acpi_size struct_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_fixed_io);
+struct acpi_rsconvert_info acpi_rs_convert_fixed_io[4] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_FIXED_IO,
+ ACPI_RS_SIZE(struct acpi_resource_fixed_io),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_fixed_io)},
- ACPI_FUNCTION_TRACE("rs_fixed_io_resource");
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_FIXED_IO,
+ sizeof(struct aml_resource_fixed_io),
+ 0},
+ /*
+ * These fields are contiguous in both the source and destination:
+ * Base Address
+ * Length
+ */
+ {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.fixed_io.address_length),
+ AML_OFFSET(fixed_io.address_length),
+ 1},
- /* The number of bytes consumed are Constant */
-
- *bytes_consumed = 4;
-
- output_struct->id = ACPI_RSTYPE_FIXED_IO;
-
- /* Check Range Base Address */
-
- buffer += 1;
- ACPI_MOVE_16_TO_16(&temp16, buffer);
-
- output_struct->data.fixed_io.base_address = temp16;
-
- /* Check range_length */
-
- buffer += 2;
- temp8 = *buffer;
-
- output_struct->data.fixed_io.range_length = temp8;
-
- /* Set the Length parameter */
-
- output_struct->length = (u32) struct_size;
-
- /* Return the final size of the structure */
-
- *structure_size = struct_size;
- return_ACPI_STATUS(AE_OK);
-}
+ {ACPI_RSC_MOVE16, ACPI_RS_OFFSET(data.fixed_io.address),
+ AML_OFFSET(fixed_io.address),
+ 1}
+};
/*******************************************************************************
*
- * FUNCTION: acpi_rs_io_stream
- *
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - Pointer to where the number of bytes
- * used in the output_buffer is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
+ * acpi_rs_convert_generic_reg
*
******************************************************************************/
-acpi_status
-acpi_rs_io_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
-{
- u8 *buffer = *output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
+struct acpi_rsconvert_info acpi_rs_convert_generic_reg[4] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_GENERIC_REGISTER,
+ ACPI_RS_SIZE(struct acpi_resource_generic_register),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_generic_reg)},
- ACPI_FUNCTION_TRACE("rs_io_stream");
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_GENERIC_REGISTER,
+ sizeof(struct aml_resource_generic_register),
+ 0},
+ /*
+ * These fields are contiguous in both the source and destination:
+ * Address Space ID
+ * Register Bit Width
+ * Register Bit Offset
+ * Access Size
+ */
+ {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.generic_reg.space_id),
+ AML_OFFSET(generic_reg.address_space_id),
+ 4},
- /* The descriptor field is static */
+ /* Get the Register Address */
- *buffer = 0x47;
- buffer += 1;
-
- /* Io Information Byte */
-
- temp8 = (u8) (linked_list->data.io.io_decode & 0x01);
-
- *buffer = temp8;
- buffer += 1;
-
- /* Set the Range minimum base address */
-
- temp16 = (u16) linked_list->data.io.min_base_address;
-
- ACPI_MOVE_16_TO_16(buffer, &temp16);
- buffer += 2;
-
- /* Set the Range maximum base address */
-
- temp16 = (u16) linked_list->data.io.max_base_address;
-
- ACPI_MOVE_16_TO_16(buffer, &temp16);
- buffer += 2;
-
- /* Set the base alignment */
-
- temp8 = (u8) linked_list->data.io.alignment;
-
- *buffer = temp8;
- buffer += 1;
-
- /* Set the range length */
-
- temp8 = (u8) linked_list->data.io.range_length;
-
- *buffer = temp8;
- buffer += 1;
-
- /* Return the number of bytes consumed in this operation */
-
- *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
- return_ACPI_STATUS(AE_OK);
-}
+ {ACPI_RSC_MOVE64, ACPI_RS_OFFSET(data.generic_reg.address),
+ AML_OFFSET(generic_reg.address),
+ 1}
+};
/*******************************************************************************
*
- * FUNCTION: acpi_rs_fixed_io_stream
- *
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - Pointer to where the number of bytes
- * used in the output_buffer is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
+ * acpi_rs_convert_end_dpf
*
******************************************************************************/
-acpi_status
-acpi_rs_fixed_io_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
-{
- u8 *buffer = *output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
+struct acpi_rsconvert_info acpi_rs_convert_end_dpf[2] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_END_DEPENDENT,
+ ACPI_RS_SIZE_MIN,
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_end_dpf)},
- ACPI_FUNCTION_TRACE("rs_fixed_io_stream");
-
- /* The descriptor field is static */
-
- *buffer = 0x4B;
-
- buffer += 1;
-
- /* Set the Range base address */
-
- temp16 = (u16) linked_list->data.fixed_io.base_address;
-
- ACPI_MOVE_16_TO_16(buffer, &temp16);
- buffer += 2;
-
- /* Set the range length */
-
- temp8 = (u8) linked_list->data.fixed_io.range_length;
-
- *buffer = temp8;
- buffer += 1;
-
- /* Return the number of bytes consumed in this operation */
-
- *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
- return_ACPI_STATUS(AE_OK);
-}
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_END_DEPENDENT,
+ sizeof(struct aml_resource_end_dependent),
+ 0}
+};
/*******************************************************************************
*
- * FUNCTION: acpi_rs_dma_resource
- *
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
+ * acpi_rs_convert_end_tag
*
******************************************************************************/
-acpi_status
-acpi_rs_dma_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size)
-{
- u8 *buffer = byte_stream_buffer;
- struct acpi_resource *output_struct = (void *)*output_buffer;
- u8 temp8 = 0;
- u8 index;
- u8 i;
- acpi_size struct_size = ACPI_SIZEOF_RESOURCE(struct acpi_resource_dma);
+struct acpi_rsconvert_info acpi_rs_convert_end_tag[2] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_END_TAG,
+ ACPI_RS_SIZE_MIN,
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_end_tag)},
- ACPI_FUNCTION_TRACE("rs_dma_resource");
-
- /* The number of bytes consumed are Constant */
-
- *bytes_consumed = 3;
- output_struct->id = ACPI_RSTYPE_DMA;
-
- /* Point to the 8-bits of Byte 1 */
-
- buffer += 1;
- temp8 = *buffer;
-
- /* Decode the DMA channel bits */
-
- for (i = 0, index = 0; index < 8; index++) {
- if ((temp8 >> index) & 0x01) {
- output_struct->data.dma.channels[i] = index;
- i++;
- }
- }
-
- /* Zero DMA channels is valid */
-
- output_struct->data.dma.number_of_channels = i;
- if (i > 0) {
- /* Calculate the structure size based upon the number of interrupts */
-
- struct_size += ((acpi_size) i - 1) * 4;
- }
-
- /* Point to Byte 2 */
-
- buffer += 1;
- temp8 = *buffer;
-
- /* Check for transfer preference (Bits[1:0]) */
-
- output_struct->data.dma.transfer = temp8 & 0x03;
-
- if (0x03 == output_struct->data.dma.transfer) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid DMA.Transfer preference (3)\n"));
- return_ACPI_STATUS(AE_BAD_DATA);
- }
-
- /* Get bus master preference (Bit[2]) */
-
- output_struct->data.dma.bus_master = (temp8 >> 2) & 0x01;
-
- /* Get channel speed support (Bits[6:5]) */
-
- output_struct->data.dma.type = (temp8 >> 5) & 0x03;
-
- /* Set the Length parameter */
-
- output_struct->length = (u32) struct_size;
-
- /* Return the final size of the structure */
-
- *structure_size = struct_size;
- return_ACPI_STATUS(AE_OK);
-}
+ /*
+ * Note: The checksum field is set to zero, meaning that the resource
+ * data is treated as if the checksum operation succeeded.
+ * (ACPI Spec 1.0b Section 6.4.2.8)
+ */
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_END_TAG,
+ sizeof(struct aml_resource_end_tag),
+ 0}
+};
/*******************************************************************************
*
- * FUNCTION: acpi_rs_dma_stream
- *
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - Pointer to where the number of bytes
- * used in the output_buffer is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
+ * acpi_rs_get_start_dpf
*
******************************************************************************/
-acpi_status
-acpi_rs_dma_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
-{
- u8 *buffer = *output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
- u8 index;
+struct acpi_rsconvert_info acpi_rs_get_start_dpf[5] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_START_DEPENDENT,
+ ACPI_RS_SIZE(struct acpi_resource_start_dependent),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_get_start_dpf)},
- ACPI_FUNCTION_TRACE("rs_dma_stream");
+ /* Defaults for Compatibility and Performance priorities */
- /* The descriptor field is static */
+ {ACPI_RSC_SET8, ACPI_RS_OFFSET(data.start_dpf.compatibility_priority),
+ ACPI_ACCEPTABLE_CONFIGURATION,
+ 2},
- *buffer = 0x2A;
- buffer += 1;
- temp8 = 0;
+ /* All done if there is no flag byte present in the descriptor */
- /* Loop through all of the Channels and set the mask bits */
+ {ACPI_RSC_EXIT_NE, ACPI_RSC_COMPARE_AML_LENGTH, 0, 1},
- for (index = 0;
- index < linked_list->data.dma.number_of_channels; index++) {
- temp16 = (u16) linked_list->data.dma.channels[index];
- temp8 |= 0x1 << temp16;
- }
+ /* Flag byte is present, get the flags */
- *buffer = temp8;
- buffer += 1;
+ {ACPI_RSC_2BITFLAG,
+ ACPI_RS_OFFSET(data.start_dpf.compatibility_priority),
+ AML_OFFSET(start_dpf.flags),
+ 0},
- /* Set the DMA Info */
+ {ACPI_RSC_2BITFLAG,
+ ACPI_RS_OFFSET(data.start_dpf.performance_robustness),
+ AML_OFFSET(start_dpf.flags),
+ 2}
+};
- temp8 = (u8) ((linked_list->data.dma.type & 0x03) << 5);
- temp8 |= ((linked_list->data.dma.bus_master & 0x01) << 2);
- temp8 |= (linked_list->data.dma.transfer & 0x03);
+/*******************************************************************************
+ *
+ * acpi_rs_set_start_dpf
+ *
+ ******************************************************************************/
- *buffer = temp8;
- buffer += 1;
+struct acpi_rsconvert_info acpi_rs_set_start_dpf[6] = {
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_START_DEPENDENT,
+ sizeof(struct aml_resource_start_dependent),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_set_start_dpf)},
- /* Return the number of bytes consumed in this operation */
+ /* Set the default flag values */
- *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
- return_ACPI_STATUS(AE_OK);
-}
+ {ACPI_RSC_2BITFLAG,
+ ACPI_RS_OFFSET(data.start_dpf.compatibility_priority),
+ AML_OFFSET(start_dpf.flags),
+ 0},
+
+ {ACPI_RSC_2BITFLAG,
+ ACPI_RS_OFFSET(data.start_dpf.performance_robustness),
+ AML_OFFSET(start_dpf.flags),
+ 2},
+ /*
+ * All done if flags byte is necessary -- if either priority value
+ * is not ACPI_ACCEPTABLE_CONFIGURATION
+ */
+ {ACPI_RSC_EXIT_NE, ACPI_RSC_COMPARE_VALUE,
+ ACPI_RS_OFFSET(data.start_dpf.compatibility_priority),
+ ACPI_ACCEPTABLE_CONFIGURATION},
+
+ {ACPI_RSC_EXIT_NE, ACPI_RSC_COMPARE_VALUE,
+ ACPI_RS_OFFSET(data.start_dpf.performance_robustness),
+ ACPI_ACCEPTABLE_CONFIGURATION},
+
+ /* Flag byte is not necessary */
+
+ {ACPI_RSC_LENGTH, 0, 0,
+ sizeof(struct aml_resource_start_dependent_noprio)}
+};
diff --git a/drivers/acpi/resources/rsirq.c b/drivers/acpi/resources/rsirq.c
index 56043fe..1fa63bc 100644
--- a/drivers/acpi/resources/rsirq.c
+++ b/drivers/acpi/resources/rsirq.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -49,504 +49,182 @@
/*******************************************************************************
*
- * FUNCTION: acpi_rs_irq_resource
- *
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
+ * acpi_rs_get_irq
*
******************************************************************************/
-acpi_status
-acpi_rs_irq_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size)
-{
- u8 *buffer = byte_stream_buffer;
- struct acpi_resource *output_struct = (void *)*output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
- u8 index;
- u8 i;
- acpi_size struct_size = ACPI_SIZEOF_RESOURCE(struct acpi_resource_irq);
+struct acpi_rsconvert_info acpi_rs_get_irq[7] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_IRQ,
+ ACPI_RS_SIZE(struct acpi_resource_irq),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_get_irq)},
- ACPI_FUNCTION_TRACE("rs_irq_resource");
+ /* Get the IRQ mask (bytes 1:2) */
- /*
- * The number of bytes consumed are contained in the descriptor
- * (Bits:0-1)
- */
- temp8 = *buffer;
- *bytes_consumed = (temp8 & 0x03) + 1;
- output_struct->id = ACPI_RSTYPE_IRQ;
+ {ACPI_RSC_BITMASK16, ACPI_RS_OFFSET(data.irq.interrupts[0]),
+ AML_OFFSET(irq.irq_mask),
+ ACPI_RS_OFFSET(data.irq.interrupt_count)},
- /* Point to the 16-bits of Bytes 1 and 2 */
+ /* Set default flags (others are zero) */
- buffer += 1;
- ACPI_MOVE_16_TO_16(&temp16, buffer);
+ {ACPI_RSC_SET8, ACPI_RS_OFFSET(data.irq.triggering),
+ ACPI_EDGE_SENSITIVE,
+ 1},
- output_struct->data.irq.number_of_interrupts = 0;
+ /* All done if no flag byte present in descriptor */
- /* Decode the IRQ bits */
+ {ACPI_RSC_EXIT_NE, ACPI_RSC_COMPARE_AML_LENGTH, 0, 3},
- for (i = 0, index = 0; index < 16; index++) {
- if ((temp16 >> index) & 0x01) {
- output_struct->data.irq.interrupts[i] = index;
- i++;
- }
- }
+ /* Get flags: Triggering[0], Polarity[3], Sharing[4] */
- /* Zero interrupts is valid */
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.triggering),
+ AML_OFFSET(irq.flags),
+ 0},
- output_struct->data.irq.number_of_interrupts = i;
- if (i > 0) {
- /* Calculate the structure size based upon the number of interrupts */
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.polarity),
+ AML_OFFSET(irq.flags),
+ 3},
- struct_size += ((acpi_size) i - 1) * 4;
- }
-
- /* Point to Byte 3 if it is used */
-
- if (4 == *bytes_consumed) {
- buffer += 2;
- temp8 = *buffer;
-
- /* Check for HE, LL interrupts */
-
- switch (temp8 & 0x09) {
- case 0x01: /* HE */
- output_struct->data.irq.edge_level =
- ACPI_EDGE_SENSITIVE;
- output_struct->data.irq.active_high_low =
- ACPI_ACTIVE_HIGH;
- break;
-
- case 0x08: /* LL */
- output_struct->data.irq.edge_level =
- ACPI_LEVEL_SENSITIVE;
- output_struct->data.irq.active_high_low =
- ACPI_ACTIVE_LOW;
- break;
-
- default:
- /*
- * Only _LL and _HE polarity/trigger interrupts
- * are allowed (ACPI spec, section "IRQ Format")
- * so 0x00 and 0x09 are illegal.
- */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid interrupt polarity/trigger in resource list, %X\n",
- temp8));
- return_ACPI_STATUS(AE_BAD_DATA);
- }
-
- /* Check for sharable */
-
- output_struct->data.irq.shared_exclusive = (temp8 >> 3) & 0x01;
- } else {
- /*
- * Assume Edge Sensitive, Active High, Non-Sharable
- * per ACPI Specification
- */
- output_struct->data.irq.edge_level = ACPI_EDGE_SENSITIVE;
- output_struct->data.irq.active_high_low = ACPI_ACTIVE_HIGH;
- output_struct->data.irq.shared_exclusive = ACPI_EXCLUSIVE;
- }
-
- /* Set the Length parameter */
-
- output_struct->length = (u32) struct_size;
-
- /* Return the final size of the structure */
-
- *structure_size = struct_size;
- return_ACPI_STATUS(AE_OK);
-}
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.sharable),
+ AML_OFFSET(irq.flags),
+ 4}
+};
/*******************************************************************************
*
- * FUNCTION: acpi_rs_irq_stream
- *
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - Pointer to where the number of bytes
- * used in the output_buffer is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
+ * acpi_rs_set_irq
*
******************************************************************************/
-acpi_status
-acpi_rs_irq_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
-{
- u8 *buffer = *output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
- u8 index;
- u8 IRqinfo_byte_needed;
+struct acpi_rsconvert_info acpi_rs_set_irq[9] = {
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_IRQ,
+ sizeof(struct aml_resource_irq),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_set_irq)},
- ACPI_FUNCTION_TRACE("rs_irq_stream");
+ /* Convert interrupt list to 16-bit IRQ bitmask */
+ {ACPI_RSC_BITMASK16, ACPI_RS_OFFSET(data.irq.interrupts[0]),
+ AML_OFFSET(irq.irq_mask),
+ ACPI_RS_OFFSET(data.irq.interrupt_count)},
+
+ /* Set the flags byte by default */
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.triggering),
+ AML_OFFSET(irq.flags),
+ 0},
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.polarity),
+ AML_OFFSET(irq.flags),
+ 3},
+
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.sharable),
+ AML_OFFSET(irq.flags),
+ 4},
/*
- * The descriptor field is set based upon whether a third byte is
- * needed to contain the IRQ Information.
+ * Check if the flags byte is necessary. Not needed if the flags are:
+ * ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_HIGH, ACPI_EXCLUSIVE
*/
- if (ACPI_EDGE_SENSITIVE == linked_list->data.irq.edge_level &&
- ACPI_ACTIVE_HIGH == linked_list->data.irq.active_high_low &&
- ACPI_EXCLUSIVE == linked_list->data.irq.shared_exclusive) {
- *buffer = 0x22;
- IRqinfo_byte_needed = FALSE;
- } else {
- *buffer = 0x23;
- IRqinfo_byte_needed = TRUE;
- }
+ {ACPI_RSC_EXIT_NE, ACPI_RSC_COMPARE_VALUE,
+ ACPI_RS_OFFSET(data.irq.triggering),
+ ACPI_EDGE_SENSITIVE},
- buffer += 1;
- temp16 = 0;
+ {ACPI_RSC_EXIT_NE, ACPI_RSC_COMPARE_VALUE,
+ ACPI_RS_OFFSET(data.irq.polarity),
+ ACPI_ACTIVE_HIGH},
- /* Loop through all of the interrupts and set the mask bits */
+ {ACPI_RSC_EXIT_NE, ACPI_RSC_COMPARE_VALUE,
+ ACPI_RS_OFFSET(data.irq.sharable),
+ ACPI_EXCLUSIVE},
- for (index = 0;
- index < linked_list->data.irq.number_of_interrupts; index++) {
- temp8 = (u8) linked_list->data.irq.interrupts[index];
- temp16 |= 0x1 << temp8;
- }
+ /* irq_no_flags() descriptor can be used */
- ACPI_MOVE_16_TO_16(buffer, &temp16);
- buffer += 2;
-
- /* Set the IRQ Info byte if needed. */
-
- if (IRqinfo_byte_needed) {
- temp8 = 0;
- temp8 = (u8) ((linked_list->data.irq.shared_exclusive &
- 0x01) << 4);
-
- if (ACPI_LEVEL_SENSITIVE == linked_list->data.irq.edge_level &&
- ACPI_ACTIVE_LOW == linked_list->data.irq.active_high_low) {
- temp8 |= 0x08;
- } else {
- temp8 |= 0x01;
- }
-
- *buffer = temp8;
- buffer += 1;
- }
-
- /* Return the number of bytes consumed in this operation */
-
- *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
- return_ACPI_STATUS(AE_OK);
-}
+ {ACPI_RSC_LENGTH, 0, 0, sizeof(struct aml_resource_irq_noflags)}
+};
/*******************************************************************************
*
- * FUNCTION: acpi_rs_extended_irq_resource
- *
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
+ * acpi_rs_convert_ext_irq
*
******************************************************************************/
-acpi_status
-acpi_rs_extended_irq_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size)
-{
- u8 *buffer = byte_stream_buffer;
- struct acpi_resource *output_struct = (void *)*output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
- u8 *temp_ptr;
- u8 index;
- acpi_size struct_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_ext_irq);
+struct acpi_rsconvert_info acpi_rs_convert_ext_irq[9] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_EXTENDED_IRQ,
+ ACPI_RS_SIZE(struct acpi_resource_extended_irq),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_ext_irq)},
- ACPI_FUNCTION_TRACE("rs_extended_irq_resource");
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_EXTENDED_IRQ,
+ sizeof(struct aml_resource_extended_irq),
+ 0},
- /* Get the Descriptor Length field */
+ /* Flag bits */
- buffer += 1;
- ACPI_MOVE_16_TO_16(&temp16, buffer);
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.extended_irq.producer_consumer),
+ AML_OFFSET(extended_irq.flags),
+ 0},
- /* Validate minimum descriptor length */
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.extended_irq.triggering),
+ AML_OFFSET(extended_irq.flags),
+ 1},
- if (temp16 < 6) {
- return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
- }
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.extended_irq.polarity),
+ AML_OFFSET(extended_irq.flags),
+ 2},
- *bytes_consumed = temp16 + 3;
- output_struct->id = ACPI_RSTYPE_EXT_IRQ;
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.extended_irq.sharable),
+ AML_OFFSET(extended_irq.flags),
+ 3},
- /* Point to the Byte3 */
+ /* IRQ Table length (Byte4) */
- buffer += 2;
- temp8 = *buffer;
+ {ACPI_RSC_COUNT, ACPI_RS_OFFSET(data.extended_irq.interrupt_count),
+ AML_OFFSET(extended_irq.interrupt_count),
+ sizeof(u32)}
+ ,
- output_struct->data.extended_irq.producer_consumer = temp8 & 0x01;
+ /* Copy every IRQ in the table, each is 32 bits */
- /*
- * Check for Interrupt Mode
- *
- * The definition of an Extended IRQ changed between ACPI spec v1.0b
- * and ACPI spec 2.0 (section 6.4.3.6 in both).
- *
- * - Edge/Level are defined opposite in the table vs the headers
- */
- output_struct->data.extended_irq.edge_level =
- (temp8 & 0x2) ? ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
+ {ACPI_RSC_MOVE32, ACPI_RS_OFFSET(data.extended_irq.interrupts[0]),
+ AML_OFFSET(extended_irq.interrupts[0]),
+ 0}
+ ,
- /* Check Interrupt Polarity */
+ /* Optional resource_source (Index and String) */
- output_struct->data.extended_irq.active_high_low = (temp8 >> 2) & 0x1;
-
- /* Check for sharable */
-
- output_struct->data.extended_irq.shared_exclusive = (temp8 >> 3) & 0x01;
-
- /* Point to Byte4 (IRQ Table length) */
-
- buffer += 1;
- temp8 = *buffer;
-
- /* Must have at least one IRQ */
-
- if (temp8 < 1) {
- return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
- }
-
- output_struct->data.extended_irq.number_of_interrupts = temp8;
-
- /*
- * Add any additional structure size to properly calculate
- * the next pointer at the end of this function
- */
- struct_size += (temp8 - 1) * 4;
-
- /* Point to Byte5 (First IRQ Number) */
-
- buffer += 1;
-
- /* Cycle through every IRQ in the table */
-
- for (index = 0; index < temp8; index++) {
- ACPI_MOVE_32_TO_32(&output_struct->data.extended_irq.
- interrupts[index], buffer);
-
- /* Point to the next IRQ */
-
- buffer += 4;
- }
-
- /*
- * This will leave us pointing to the Resource Source Index
- * If it is present, then save it off and calculate the
- * pointer to where the null terminated string goes:
- * Each Interrupt takes 32-bits + the 5 bytes of the
- * stream that are default.
- *
- * Note: Some resource descriptors will have an additional null, so
- * we add 1 to the length.
- */
- if (*bytes_consumed >
- ((acpi_size) output_struct->data.extended_irq.number_of_interrupts *
- 4) + (5 + 1)) {
- /* Dereference the Index */
-
- temp8 = *buffer;
- output_struct->data.extended_irq.resource_source.index =
- (u32) temp8;
-
- /* Point to the String */
-
- buffer += 1;
-
- /* Point the String pointer to the end of this structure. */
-
- output_struct->data.extended_irq.resource_source.string_ptr =
- (char *)((char *)output_struct + struct_size);
-
- temp_ptr = (u8 *)
- output_struct->data.extended_irq.resource_source.string_ptr;
-
- /* Copy the string into the buffer */
-
- index = 0;
- while (*buffer) {
- *temp_ptr = *buffer;
-
- temp_ptr += 1;
- buffer += 1;
- index += 1;
- }
-
- /* Add the terminating null */
-
- *temp_ptr = 0;
- output_struct->data.extended_irq.resource_source.string_length =
- index + 1;
-
- /*
- * In order for the struct_size to fall on a 32-bit boundary,
- * calculate the length of the string and expand the
- * struct_size to the next 32-bit boundary.
- */
- temp8 = (u8) (index + 1);
- struct_size += ACPI_ROUND_UP_to_32_bITS(temp8);
- } else {
- output_struct->data.extended_irq.resource_source.index = 0;
- output_struct->data.extended_irq.resource_source.string_length =
- 0;
- output_struct->data.extended_irq.resource_source.string_ptr =
- NULL;
- }
-
- /* Set the Length parameter */
-
- output_struct->length = (u32) struct_size;
-
- /* Return the final size of the structure */
-
- *structure_size = struct_size;
- return_ACPI_STATUS(AE_OK);
-}
+ {ACPI_RSC_SOURCEX, ACPI_RS_OFFSET(data.extended_irq.resource_source),
+ ACPI_RS_OFFSET(data.extended_irq.interrupts[0]),
+ sizeof(struct aml_resource_extended_irq)}
+};
/*******************************************************************************
*
- * FUNCTION: acpi_rs_extended_irq_stream
- *
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - Pointer to where the number of bytes
- * used in the output_buffer is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
+ * acpi_rs_convert_dma
*
******************************************************************************/
-acpi_status
-acpi_rs_extended_irq_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
-{
- u8 *buffer = *output_buffer;
- u16 *length_field;
- u8 temp8 = 0;
- u8 index;
+struct acpi_rsconvert_info acpi_rs_convert_dma[6] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_DMA,
+ ACPI_RS_SIZE(struct acpi_resource_dma),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_dma)},
- ACPI_FUNCTION_TRACE("rs_extended_irq_stream");
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_DMA,
+ sizeof(struct aml_resource_dma),
+ 0},
- /* Set the Descriptor Type field */
+ /* Flags: transfer preference, bus mastering, channel speed */
- *buffer = ACPI_RDESC_TYPE_EXTENDED_XRUPT;
- buffer += 1;
+ {ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.dma.transfer),
+ AML_OFFSET(dma.flags),
+ 0},
- /* Save a pointer to the Length field - to be filled in later */
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.dma.bus_master),
+ AML_OFFSET(dma.flags),
+ 2},
- length_field = ACPI_CAST_PTR(u16, buffer);
- buffer += 2;
+ {ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.dma.type),
+ AML_OFFSET(dma.flags),
+ 5},
- /* Set the Interrupt vector flags */
+ /* DMA channel mask bits */
- temp8 = (u8) (linked_list->data.extended_irq.producer_consumer & 0x01);
- temp8 |=
- ((linked_list->data.extended_irq.shared_exclusive & 0x01) << 3);
-
- /*
- * Set the Interrupt Mode
- *
- * The definition of an Extended IRQ changed between ACPI spec v1.0b
- * and ACPI spec 2.0 (section 6.4.3.6 in both). This code does not
- * implement the more restrictive definition of 1.0b
- *
- * - Edge/Level are defined opposite in the table vs the headers
- */
- if (ACPI_EDGE_SENSITIVE == linked_list->data.extended_irq.edge_level) {
- temp8 |= 0x2;
- }
-
- /* Set the Interrupt Polarity */
-
- temp8 |= ((linked_list->data.extended_irq.active_high_low & 0x1) << 2);
-
- *buffer = temp8;
- buffer += 1;
-
- /* Set the Interrupt table length */
-
- temp8 = (u8) linked_list->data.extended_irq.number_of_interrupts;
-
- *buffer = temp8;
- buffer += 1;
-
- for (index = 0;
- index < linked_list->data.extended_irq.number_of_interrupts;
- index++) {
- ACPI_MOVE_32_TO_32(buffer,
- &linked_list->data.extended_irq.
- interrupts[index]);
- buffer += 4;
- }
-
- /* Resource Source Index and Resource Source are optional */
-
- if (0 != linked_list->data.extended_irq.resource_source.string_length) {
- *buffer =
- (u8) linked_list->data.extended_irq.resource_source.index;
- buffer += 1;
-
- /* Copy the string */
-
- ACPI_STRCPY((char *)buffer,
- linked_list->data.extended_irq.resource_source.
- string_ptr);
-
- /*
- * Buffer needs to be set to the length of the string + one for the
- * terminating null
- */
- buffer +=
- (acpi_size) (ACPI_STRLEN
- (linked_list->data.extended_irq.
- resource_source.string_ptr) + 1);
- }
-
- /* Return the number of bytes consumed in this operation */
-
- *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
-
- /*
- * Set the length field to the number of bytes consumed
- * minus the header size (3 bytes)
- */
- *length_field = (u16) (*bytes_consumed - 3);
- return_ACPI_STATUS(AE_OK);
-}
+ {ACPI_RSC_BITMASK, ACPI_RS_OFFSET(data.dma.channels[0]),
+ AML_OFFSET(dma.dma_channel_mask),
+ ACPI_RS_OFFSET(data.dma.channel_count)}
+};
diff --git a/drivers/acpi/resources/rslist.c b/drivers/acpi/resources/rslist.c
index 103eb31..1434e78 100644
--- a/drivers/acpi/resources/rslist.c
+++ b/drivers/acpi/resources/rslist.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -49,52 +49,12 @@
/*******************************************************************************
*
- * FUNCTION: acpi_rs_get_resource_type
+ * FUNCTION: acpi_rs_convert_aml_to_resources
*
- * PARAMETERS: resource_start_byte - Byte 0 of a resource descriptor
- *
- * RETURN: The Resource Type with no extraneous bits
- *
- * DESCRIPTION: Extract the Resource Type/Name from the first byte of
- * a resource descriptor.
- *
- ******************************************************************************/
-u8 acpi_rs_get_resource_type(u8 resource_start_byte)
-{
-
- ACPI_FUNCTION_ENTRY();
-
- /* Determine if this is a small or large resource */
-
- switch (resource_start_byte & ACPI_RDESC_TYPE_MASK) {
- case ACPI_RDESC_TYPE_SMALL:
-
- /* Small Resource Type -- Only bits 6:3 are valid */
-
- return ((u8) (resource_start_byte & ACPI_RDESC_SMALL_MASK));
-
- case ACPI_RDESC_TYPE_LARGE:
-
- /* Large Resource Type -- All bits are valid */
-
- return (resource_start_byte);
-
- default:
- /* Invalid type */
- break;
- }
-
- return (0xFF);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_byte_stream_to_list
- *
- * PARAMETERS: byte_stream_buffer - Pointer to the resource byte stream
- * byte_stream_buffer_length - Length of byte_stream_buffer
- * output_buffer - Pointer to the buffer that will
- * contain the output structures
+ * PARAMETERS: Aml - Pointer to the resource byte stream
+ * aml_length - Length of Aml
+ * output_buffer - Pointer to the buffer that will
+ * contain the output structures
*
* RETURN: Status
*
@@ -102,241 +62,78 @@
* linked list of resources in the caller's output buffer
*
******************************************************************************/
-
acpi_status
-acpi_rs_byte_stream_to_list(u8 * byte_stream_buffer,
- u32 byte_stream_buffer_length, u8 * output_buffer)
+acpi_rs_convert_aml_to_resources(u8 * aml, u32 aml_length, u8 * output_buffer)
{
+ struct acpi_resource *resource = (void *)output_buffer;
acpi_status status;
- acpi_size bytes_parsed = 0;
- u8 resource_type = 0;
- acpi_size bytes_consumed = 0;
- u8 *buffer = output_buffer;
- acpi_size structure_size = 0;
- u8 end_tag_processed = FALSE;
- struct acpi_resource *resource;
+ u8 resource_index;
+ u8 *end_aml;
- ACPI_FUNCTION_TRACE("rs_byte_stream_to_list");
+ ACPI_FUNCTION_TRACE("rs_convert_aml_to_resources");
- while (bytes_parsed < byte_stream_buffer_length && !end_tag_processed) {
- /* The next byte in the stream is the resource type */
+ end_aml = aml + aml_length;
- resource_type = acpi_rs_get_resource_type(*byte_stream_buffer);
+ /* Loop until end-of-buffer or an end_tag is found */
- switch (resource_type) {
- case ACPI_RDESC_TYPE_MEMORY_24:
- /*
- * 24-Bit Memory Resource
- */
- status = acpi_rs_memory24_resource(byte_stream_buffer,
- &bytes_consumed,
- &buffer,
- &structure_size);
- break;
+ while (aml < end_aml) {
+ /* Validate the Resource Type and Resource Length */
- case ACPI_RDESC_TYPE_LARGE_VENDOR:
- /*
- * Vendor Defined Resource
- */
- status = acpi_rs_vendor_resource(byte_stream_buffer,
- &bytes_consumed,
- &buffer,
- &structure_size);
- break;
-
- case ACPI_RDESC_TYPE_MEMORY_32:
- /*
- * 32-Bit Memory Range Resource
- */
- status =
- acpi_rs_memory32_range_resource(byte_stream_buffer,
- &bytes_consumed,
- &buffer,
- &structure_size);
- break;
-
- case ACPI_RDESC_TYPE_FIXED_MEMORY_32:
- /*
- * 32-Bit Fixed Memory Resource
- */
- status =
- acpi_rs_fixed_memory32_resource(byte_stream_buffer,
- &bytes_consumed,
- &buffer,
- &structure_size);
- break;
-
- case ACPI_RDESC_TYPE_QWORD_ADDRESS_SPACE:
- case ACPI_RDESC_TYPE_EXTENDED_ADDRESS_SPACE:
- /*
- * 64-Bit Address Resource
- */
- status = acpi_rs_address64_resource(byte_stream_buffer,
- &bytes_consumed,
- &buffer,
- &structure_size);
- break;
-
- case ACPI_RDESC_TYPE_DWORD_ADDRESS_SPACE:
- /*
- * 32-Bit Address Resource
- */
- status = acpi_rs_address32_resource(byte_stream_buffer,
- &bytes_consumed,
- &buffer,
- &structure_size);
- break;
-
- case ACPI_RDESC_TYPE_WORD_ADDRESS_SPACE:
- /*
- * 16-Bit Address Resource
- */
- status = acpi_rs_address16_resource(byte_stream_buffer,
- &bytes_consumed,
- &buffer,
- &structure_size);
- break;
-
- case ACPI_RDESC_TYPE_EXTENDED_XRUPT:
- /*
- * Extended IRQ
- */
- status =
- acpi_rs_extended_irq_resource(byte_stream_buffer,
- &bytes_consumed,
- &buffer,
- &structure_size);
- break;
-
- case ACPI_RDESC_TYPE_IRQ_FORMAT:
- /*
- * IRQ Resource
- */
- status = acpi_rs_irq_resource(byte_stream_buffer,
- &bytes_consumed, &buffer,
- &structure_size);
- break;
-
- case ACPI_RDESC_TYPE_DMA_FORMAT:
- /*
- * DMA Resource
- */
- status = acpi_rs_dma_resource(byte_stream_buffer,
- &bytes_consumed, &buffer,
- &structure_size);
- break;
-
- case ACPI_RDESC_TYPE_START_DEPENDENT:
- /*
- * Start Dependent Functions Resource
- */
- status =
- acpi_rs_start_depend_fns_resource
- (byte_stream_buffer, &bytes_consumed, &buffer,
- &structure_size);
- break;
-
- case ACPI_RDESC_TYPE_END_DEPENDENT:
- /*
- * End Dependent Functions Resource
- */
- status =
- acpi_rs_end_depend_fns_resource(byte_stream_buffer,
- &bytes_consumed,
- &buffer,
- &structure_size);
- break;
-
- case ACPI_RDESC_TYPE_IO_PORT:
- /*
- * IO Port Resource
- */
- status = acpi_rs_io_resource(byte_stream_buffer,
- &bytes_consumed, &buffer,
- &structure_size);
- break;
-
- case ACPI_RDESC_TYPE_FIXED_IO_PORT:
- /*
- * Fixed IO Port Resource
- */
- status = acpi_rs_fixed_io_resource(byte_stream_buffer,
- &bytes_consumed,
- &buffer,
- &structure_size);
- break;
-
- case ACPI_RDESC_TYPE_SMALL_VENDOR:
- /*
- * Vendor Specific Resource
- */
- status = acpi_rs_vendor_resource(byte_stream_buffer,
- &bytes_consumed,
- &buffer,
- &structure_size);
- break;
-
- case ACPI_RDESC_TYPE_END_TAG:
- /*
- * End Tag
- */
- end_tag_processed = TRUE;
- status = acpi_rs_end_tag_resource(byte_stream_buffer,
- &bytes_consumed,
- &buffer,
- &structure_size);
- break;
-
- default:
- /*
- * Invalid/Unknown resource type
- */
- status = AE_AML_INVALID_RESOURCE_TYPE;
- break;
- }
-
+ status = acpi_ut_validate_resource(aml, &resource_index);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
- /* Update the return value and counter */
+ /* Convert the AML byte stream resource to a local resource struct */
- bytes_parsed += bytes_consumed;
+ status =
+ acpi_rs_convert_aml_to_resource(resource,
+ ACPI_CAST_PTR(union
+ aml_resource,
+ aml),
+ acpi_gbl_get_resource_dispatch
+ [resource_index]);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not convert AML resource (Type %X)",
+ *aml));
+ return_ACPI_STATUS(status);
+ }
- /* Set the byte stream to point to the next resource */
+ /* Normal exit on completion of an end_tag resource descriptor */
- byte_stream_buffer += bytes_consumed;
+ if (acpi_ut_get_resource_type(aml) ==
+ ACPI_RESOURCE_NAME_END_TAG) {
+ return_ACPI_STATUS(AE_OK);
+ }
- /* Set the Buffer to the next structure */
+ /* Point to the next input AML resource */
- resource = ACPI_CAST_PTR(struct acpi_resource, buffer);
- resource->length =
- (u32) ACPI_ALIGN_RESOURCE_SIZE(resource->length);
- buffer += ACPI_ALIGN_RESOURCE_SIZE(structure_size);
+ aml += acpi_ut_get_descriptor_length(aml);
+
+ /* Point to the next structure in the output buffer */
+
+ resource =
+ ACPI_ADD_PTR(struct acpi_resource, resource,
+ resource->length);
}
- /* Check the reason for exiting the while loop */
+ /* Did not find an end_tag resource descriptor */
- if (!end_tag_processed) {
- return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
- }
-
- return_ACPI_STATUS(AE_OK);
+ return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
}
/*******************************************************************************
*
- * FUNCTION: acpi_rs_list_to_byte_stream
+ * FUNCTION: acpi_rs_convert_resources_to_aml
*
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * byte_steam_size_needed - Calculated size of the byte stream
- * needed from calling
- * acpi_rs_get_byte_stream_length()
- * The size of the output_buffer is
- * guaranteed to be >=
- * byte_stream_size_needed
- * output_buffer - Pointer to the buffer that will
- * contain the byte stream
+ * PARAMETERS: Resource - Pointer to the resource linked list
+ * aml_size_needed - Calculated size of the byte stream
+ * needed from calling acpi_rs_get_aml_length()
+ * The size of the output_buffer is
+ * guaranteed to be >= aml_size_needed
+ * output_buffer - Pointer to the buffer that will
+ * contain the byte stream
*
* RETURN: Status
*
@@ -346,180 +143,73 @@
******************************************************************************/
acpi_status
-acpi_rs_list_to_byte_stream(struct acpi_resource *linked_list,
- acpi_size byte_stream_size_needed,
- u8 * output_buffer)
+acpi_rs_convert_resources_to_aml(struct acpi_resource *resource,
+ acpi_size aml_size_needed, u8 * output_buffer)
{
+ u8 *aml = output_buffer;
+ u8 *end_aml = output_buffer + aml_size_needed;
acpi_status status;
- u8 *buffer = output_buffer;
- acpi_size bytes_consumed = 0;
- u8 done = FALSE;
- ACPI_FUNCTION_TRACE("rs_list_to_byte_stream");
+ ACPI_FUNCTION_TRACE("rs_convert_resources_to_aml");
- while (!done) {
- switch (linked_list->id) {
- case ACPI_RSTYPE_IRQ:
- /*
- * IRQ Resource
- */
- status =
- acpi_rs_irq_stream(linked_list, &buffer,
- &bytes_consumed);
- break;
+ /* Walk the resource descriptor list, convert each descriptor */
- case ACPI_RSTYPE_DMA:
- /*
- * DMA Resource
- */
- status =
- acpi_rs_dma_stream(linked_list, &buffer,
- &bytes_consumed);
- break;
+ while (aml < end_aml) {
+ /* Validate the (internal) Resource Type */
- case ACPI_RSTYPE_START_DPF:
- /*
- * Start Dependent Functions Resource
- */
- status = acpi_rs_start_depend_fns_stream(linked_list,
- &buffer,
- &bytes_consumed);
- break;
-
- case ACPI_RSTYPE_END_DPF:
- /*
- * End Dependent Functions Resource
- */
- status = acpi_rs_end_depend_fns_stream(linked_list,
- &buffer,
- &bytes_consumed);
- break;
-
- case ACPI_RSTYPE_IO:
- /*
- * IO Port Resource
- */
- status =
- acpi_rs_io_stream(linked_list, &buffer,
- &bytes_consumed);
- break;
-
- case ACPI_RSTYPE_FIXED_IO:
- /*
- * Fixed IO Port Resource
- */
- status =
- acpi_rs_fixed_io_stream(linked_list, &buffer,
- &bytes_consumed);
- break;
-
- case ACPI_RSTYPE_VENDOR:
- /*
- * Vendor Defined Resource
- */
- status =
- acpi_rs_vendor_stream(linked_list, &buffer,
- &bytes_consumed);
- break;
-
- case ACPI_RSTYPE_END_TAG:
- /*
- * End Tag
- */
- status =
- acpi_rs_end_tag_stream(linked_list, &buffer,
- &bytes_consumed);
-
- /* An End Tag indicates the end of the Resource Template */
-
- done = TRUE;
- break;
-
- case ACPI_RSTYPE_MEM24:
- /*
- * 24-Bit Memory Resource
- */
- status =
- acpi_rs_memory24_stream(linked_list, &buffer,
- &bytes_consumed);
- break;
-
- case ACPI_RSTYPE_MEM32:
- /*
- * 32-Bit Memory Range Resource
- */
- status =
- acpi_rs_memory32_range_stream(linked_list, &buffer,
- &bytes_consumed);
- break;
-
- case ACPI_RSTYPE_FIXED_MEM32:
- /*
- * 32-Bit Fixed Memory Resource
- */
- status =
- acpi_rs_fixed_memory32_stream(linked_list, &buffer,
- &bytes_consumed);
- break;
-
- case ACPI_RSTYPE_ADDRESS16:
- /*
- * 16-Bit Address Descriptor Resource
- */
- status = acpi_rs_address16_stream(linked_list, &buffer,
- &bytes_consumed);
- break;
-
- case ACPI_RSTYPE_ADDRESS32:
- /*
- * 32-Bit Address Descriptor Resource
- */
- status = acpi_rs_address32_stream(linked_list, &buffer,
- &bytes_consumed);
- break;
-
- case ACPI_RSTYPE_ADDRESS64:
- /*
- * 64-Bit Address Descriptor Resource
- */
- status = acpi_rs_address64_stream(linked_list, &buffer,
- &bytes_consumed);
- break;
-
- case ACPI_RSTYPE_EXT_IRQ:
- /*
- * Extended IRQ Resource
- */
- status =
- acpi_rs_extended_irq_stream(linked_list, &buffer,
- &bytes_consumed);
- break;
-
- default:
- /*
- * If we get here, everything is out of sync,
- * so exit with an error
- */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid descriptor type (%X) in resource list\n",
- linked_list->id));
- status = AE_BAD_DATA;
- break;
+ if (resource->type > ACPI_RESOURCE_TYPE_MAX) {
+ ACPI_ERROR((AE_INFO,
+ "Invalid descriptor type (%X) in resource list",
+ resource->type));
+ return_ACPI_STATUS(AE_BAD_DATA);
}
+ /* Perform the conversion */
+
+ status = acpi_rs_convert_resource_to_aml(resource,
+ ACPI_CAST_PTR(union
+ aml_resource,
+ aml),
+ acpi_gbl_set_resource_dispatch
+ [resource->type]);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not convert resource (type %X) to AML",
+ resource->type));
+ return_ACPI_STATUS(status);
+ }
+
+ /* Perform final sanity check on the new AML resource descriptor */
+
+ status =
+ acpi_ut_validate_resource(ACPI_CAST_PTR
+ (union aml_resource, aml), NULL);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
- /* Set the Buffer to point to the open byte */
+ /* Check for end-of-list, normal exit */
- buffer += bytes_consumed;
+ if (resource->type == ACPI_RESOURCE_TYPE_END_TAG) {
+ /* An End Tag indicates the end of the input Resource Template */
- /* Point to the next object */
+ return_ACPI_STATUS(AE_OK);
+ }
- linked_list = ACPI_PTR_ADD(struct acpi_resource,
- linked_list, linked_list->length);
+ /*
+ * Extract the total length of the new descriptor and set the
+ * Aml to point to the next (output) resource descriptor
+ */
+ aml += acpi_ut_get_descriptor_length(aml);
+
+ /* Point to the next input resource descriptor */
+
+ resource =
+ ACPI_ADD_PTR(struct acpi_resource, resource,
+ resource->length);
}
- return_ACPI_STATUS(AE_OK);
+ /* Completed buffer, but did not find an end_tag resource descriptor */
+
+ return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
}
diff --git a/drivers/acpi/resources/rsmemory.c b/drivers/acpi/resources/rsmemory.c
index daba1a1..a513193 100644
--- a/drivers/acpi/resources/rsmemory.c
+++ b/drivers/acpi/resources/rsmemory.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -49,454 +49,187 @@
/*******************************************************************************
*
- * FUNCTION: acpi_rs_memory24_resource
- *
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
+ * acpi_rs_convert_memory24
*
******************************************************************************/
-acpi_status
-acpi_rs_memory24_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size)
-{
- u8 *buffer = byte_stream_buffer;
- struct acpi_resource *output_struct = (void *)*output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
- acpi_size struct_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_mem24);
+struct acpi_rsconvert_info acpi_rs_convert_memory24[4] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_MEMORY24,
+ ACPI_RS_SIZE(struct acpi_resource_memory24),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_memory24)},
- ACPI_FUNCTION_TRACE("rs_memory24_resource");
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_MEMORY24,
+ sizeof(struct aml_resource_memory24),
+ 0},
- /* Point past the Descriptor to get the number of bytes consumed */
+ /* Read/Write bit */
- buffer += 1;
-
- ACPI_MOVE_16_TO_16(&temp16, buffer);
- buffer += 2;
- *bytes_consumed = (acpi_size) temp16 + 3;
- output_struct->id = ACPI_RSTYPE_MEM24;
-
- /* Check Byte 3 the Read/Write bit */
-
- temp8 = *buffer;
- buffer += 1;
- output_struct->data.memory24.read_write_attribute = temp8 & 0x01;
-
- /* Get min_base_address (Bytes 4-5) */
-
- ACPI_MOVE_16_TO_16(&temp16, buffer);
- buffer += 2;
- output_struct->data.memory24.min_base_address = temp16;
-
- /* Get max_base_address (Bytes 6-7) */
-
- ACPI_MOVE_16_TO_16(&temp16, buffer);
- buffer += 2;
- output_struct->data.memory24.max_base_address = temp16;
-
- /* Get Alignment (Bytes 8-9) */
-
- ACPI_MOVE_16_TO_16(&temp16, buffer);
- buffer += 2;
- output_struct->data.memory24.alignment = temp16;
-
- /* Get range_length (Bytes 10-11) */
-
- ACPI_MOVE_16_TO_16(&temp16, buffer);
- output_struct->data.memory24.range_length = temp16;
-
- /* Set the Length parameter */
-
- output_struct->length = (u32) struct_size;
-
- /* Return the final size of the structure */
-
- *structure_size = struct_size;
- return_ACPI_STATUS(AE_OK);
-}
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.memory24.write_protect),
+ AML_OFFSET(memory24.flags),
+ 0},
+ /*
+ * These fields are contiguous in both the source and destination:
+ * Minimum Base Address
+ * Maximum Base Address
+ * Address Base Alignment
+ * Range Length
+ */
+ {ACPI_RSC_MOVE16, ACPI_RS_OFFSET(data.memory24.minimum),
+ AML_OFFSET(memory24.minimum),
+ 4}
+};
/*******************************************************************************
*
- * FUNCTION: acpi_rs_memory24_stream
- *
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - Pointer to where the number of bytes
- * used in the output_buffer is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
+ * acpi_rs_convert_memory32
*
******************************************************************************/
-acpi_status
-acpi_rs_memory24_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
-{
- u8 *buffer = *output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
+struct acpi_rsconvert_info acpi_rs_convert_memory32[4] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_MEMORY32,
+ ACPI_RS_SIZE(struct acpi_resource_memory32),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_memory32)},
- ACPI_FUNCTION_TRACE("rs_memory24_stream");
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_MEMORY32,
+ sizeof(struct aml_resource_memory32),
+ 0},
- /* The descriptor field is static */
+ /* Read/Write bit */
- *buffer = 0x81;
- buffer += 1;
-
- /* The length field is static */
-
- temp16 = 0x09;
- ACPI_MOVE_16_TO_16(buffer, &temp16);
- buffer += 2;
-
- /* Set the Information Byte */
-
- temp8 = (u8) (linked_list->data.memory24.read_write_attribute & 0x01);
- *buffer = temp8;
- buffer += 1;
-
- /* Set the Range minimum base address */
-
- ACPI_MOVE_32_TO_16(buffer,
- &linked_list->data.memory24.min_base_address);
- buffer += 2;
-
- /* Set the Range maximum base address */
-
- ACPI_MOVE_32_TO_16(buffer,
- &linked_list->data.memory24.max_base_address);
- buffer += 2;
-
- /* Set the base alignment */
-
- ACPI_MOVE_32_TO_16(buffer, &linked_list->data.memory24.alignment);
- buffer += 2;
-
- /* Set the range length */
-
- ACPI_MOVE_32_TO_16(buffer, &linked_list->data.memory24.range_length);
- buffer += 2;
-
- /* Return the number of bytes consumed in this operation */
-
- *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
- return_ACPI_STATUS(AE_OK);
-}
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.memory32.write_protect),
+ AML_OFFSET(memory32.flags),
+ 0},
+ /*
+ * These fields are contiguous in both the source and destination:
+ * Minimum Base Address
+ * Maximum Base Address
+ * Address Base Alignment
+ * Range Length
+ */
+ {ACPI_RSC_MOVE32, ACPI_RS_OFFSET(data.memory32.minimum),
+ AML_OFFSET(memory32.minimum),
+ 4}
+};
/*******************************************************************************
*
- * FUNCTION: acpi_rs_memory32_range_resource
- *
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
+ * acpi_rs_convert_fixed_memory32
*
******************************************************************************/
-acpi_status
-acpi_rs_memory32_range_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size)
-{
- u8 *buffer = byte_stream_buffer;
- struct acpi_resource *output_struct = (void *)*output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
- acpi_size struct_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_mem32);
+struct acpi_rsconvert_info acpi_rs_convert_fixed_memory32[4] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_FIXED_MEMORY32,
+ ACPI_RS_SIZE(struct acpi_resource_fixed_memory32),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_convert_fixed_memory32)},
- ACPI_FUNCTION_TRACE("rs_memory32_range_resource");
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_FIXED_MEMORY32,
+ sizeof(struct aml_resource_fixed_memory32),
+ 0},
- /* Point past the Descriptor to get the number of bytes consumed */
+ /* Read/Write bit */
- buffer += 1;
+ {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.fixed_memory32.write_protect),
+ AML_OFFSET(fixed_memory32.flags),
+ 0},
+ /*
+ * These fields are contiguous in both the source and destination:
+ * Base Address
+ * Range Length
+ */
+ {ACPI_RSC_MOVE32, ACPI_RS_OFFSET(data.fixed_memory32.address),
+ AML_OFFSET(fixed_memory32.address),
+ 2}
+};
- ACPI_MOVE_16_TO_16(&temp16, buffer);
- buffer += 2;
- *bytes_consumed = (acpi_size) temp16 + 3;
+/*******************************************************************************
+ *
+ * acpi_rs_get_vendor_small
+ *
+ ******************************************************************************/
- output_struct->id = ACPI_RSTYPE_MEM32;
+struct acpi_rsconvert_info acpi_rs_get_vendor_small[3] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_VENDOR,
+ ACPI_RS_SIZE(struct acpi_resource_vendor),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_get_vendor_small)},
+
+ /* Length of the vendor data (byte count) */
+
+ {ACPI_RSC_COUNT16, ACPI_RS_OFFSET(data.vendor.byte_length),
+ 0,
+ sizeof(u8)}
+ ,
+
+ /* Vendor data */
+
+ {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.vendor.byte_data[0]),
+ sizeof(struct aml_resource_small_header),
+ 0}
+};
+
+/*******************************************************************************
+ *
+ * acpi_rs_get_vendor_large
+ *
+ ******************************************************************************/
+
+struct acpi_rsconvert_info acpi_rs_get_vendor_large[3] = {
+ {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_VENDOR,
+ ACPI_RS_SIZE(struct acpi_resource_vendor),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_get_vendor_large)},
+
+ /* Length of the vendor data (byte count) */
+
+ {ACPI_RSC_COUNT16, ACPI_RS_OFFSET(data.vendor.byte_length),
+ 0,
+ sizeof(u8)}
+ ,
+
+ /* Vendor data */
+
+ {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.vendor.byte_data[0]),
+ sizeof(struct aml_resource_large_header),
+ 0}
+};
+
+/*******************************************************************************
+ *
+ * acpi_rs_set_vendor
+ *
+ ******************************************************************************/
+
+struct acpi_rsconvert_info acpi_rs_set_vendor[7] = {
+ /* Default is a small vendor descriptor */
+
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_VENDOR_SMALL,
+ sizeof(struct aml_resource_small_header),
+ ACPI_RSC_TABLE_SIZE(acpi_rs_set_vendor)},
+
+ /* Get the length and copy the data */
+
+ {ACPI_RSC_COUNT16, ACPI_RS_OFFSET(data.vendor.byte_length),
+ 0,
+ 0},
+
+ {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.vendor.byte_data[0]),
+ sizeof(struct aml_resource_small_header),
+ 0},
/*
- * Point to the place in the output buffer where the data portion will
- * begin.
- * 1. Set the RESOURCE_DATA * Data to point to its own address, then
- * 2. Set the pointer to the next address.
- *
- * NOTE: output_struct->Data is cast to u8, otherwise, this addition adds
- * 4 * sizeof(RESOURCE_DATA) instead of 4 * sizeof(u8)
+ * All done if the Vendor byte length is 7 or less, meaning that it will
+ * fit within a small descriptor
*/
+ {ACPI_RSC_EXIT_LE, 0, 0, 7},
- /* Check Byte 3 the Read/Write bit */
+ /* Must create a large vendor descriptor */
- temp8 = *buffer;
- buffer += 1;
+ {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_VENDOR_LARGE,
+ sizeof(struct aml_resource_large_header),
+ 0},
- output_struct->data.memory32.read_write_attribute = temp8 & 0x01;
+ {ACPI_RSC_COUNT16, ACPI_RS_OFFSET(data.vendor.byte_length),
+ 0,
+ 0},
- /* Get min_base_address (Bytes 4-7) */
-
- ACPI_MOVE_32_TO_32(&output_struct->data.memory32.min_base_address,
- buffer);
- buffer += 4;
-
- /* Get max_base_address (Bytes 8-11) */
-
- ACPI_MOVE_32_TO_32(&output_struct->data.memory32.max_base_address,
- buffer);
- buffer += 4;
-
- /* Get Alignment (Bytes 12-15) */
-
- ACPI_MOVE_32_TO_32(&output_struct->data.memory32.alignment, buffer);
- buffer += 4;
-
- /* Get range_length (Bytes 16-19) */
-
- ACPI_MOVE_32_TO_32(&output_struct->data.memory32.range_length, buffer);
-
- /* Set the Length parameter */
-
- output_struct->length = (u32) struct_size;
-
- /* Return the final size of the structure */
-
- *structure_size = struct_size;
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_fixed_memory32_resource
- *
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_rs_fixed_memory32_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size)
-{
- u8 *buffer = byte_stream_buffer;
- struct acpi_resource *output_struct = (void *)*output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
- acpi_size struct_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_fixed_mem32);
-
- ACPI_FUNCTION_TRACE("rs_fixed_memory32_resource");
-
- /* Point past the Descriptor to get the number of bytes consumed */
-
- buffer += 1;
- ACPI_MOVE_16_TO_16(&temp16, buffer);
-
- buffer += 2;
- *bytes_consumed = (acpi_size) temp16 + 3;
-
- output_struct->id = ACPI_RSTYPE_FIXED_MEM32;
-
- /* Check Byte 3 the Read/Write bit */
-
- temp8 = *buffer;
- buffer += 1;
- output_struct->data.fixed_memory32.read_write_attribute = temp8 & 0x01;
-
- /* Get range_base_address (Bytes 4-7) */
-
- ACPI_MOVE_32_TO_32(&output_struct->data.fixed_memory32.
- range_base_address, buffer);
- buffer += 4;
-
- /* Get range_length (Bytes 8-11) */
-
- ACPI_MOVE_32_TO_32(&output_struct->data.fixed_memory32.range_length,
- buffer);
-
- /* Set the Length parameter */
-
- output_struct->length = (u32) struct_size;
-
- /* Return the final size of the structure */
-
- *structure_size = struct_size;
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_memory32_range_stream
- *
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - Pointer to where the number of bytes
- * used in the output_buffer is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
- *
- ******************************************************************************/
-
-acpi_status
-acpi_rs_memory32_range_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
-{
- u8 *buffer = *output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
-
- ACPI_FUNCTION_TRACE("rs_memory32_range_stream");
-
- /* The descriptor field is static */
-
- *buffer = 0x85;
- buffer += 1;
-
- /* The length field is static */
-
- temp16 = 0x11;
-
- ACPI_MOVE_16_TO_16(buffer, &temp16);
- buffer += 2;
-
- /* Set the Information Byte */
-
- temp8 = (u8) (linked_list->data.memory32.read_write_attribute & 0x01);
- *buffer = temp8;
- buffer += 1;
-
- /* Set the Range minimum base address */
-
- ACPI_MOVE_32_TO_32(buffer,
- &linked_list->data.memory32.min_base_address);
- buffer += 4;
-
- /* Set the Range maximum base address */
-
- ACPI_MOVE_32_TO_32(buffer,
- &linked_list->data.memory32.max_base_address);
- buffer += 4;
-
- /* Set the base alignment */
-
- ACPI_MOVE_32_TO_32(buffer, &linked_list->data.memory32.alignment);
- buffer += 4;
-
- /* Set the range length */
-
- ACPI_MOVE_32_TO_32(buffer, &linked_list->data.memory32.range_length);
- buffer += 4;
-
- /* Return the number of bytes consumed in this operation */
-
- *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_fixed_memory32_stream
- *
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - Pointer to where the number of bytes
- * used in the output_buffer is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
- *
- ******************************************************************************/
-
-acpi_status
-acpi_rs_fixed_memory32_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
-{
- u8 *buffer = *output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
-
- ACPI_FUNCTION_TRACE("rs_fixed_memory32_stream");
-
- /* The descriptor field is static */
-
- *buffer = 0x86;
- buffer += 1;
-
- /* The length field is static */
-
- temp16 = 0x09;
-
- ACPI_MOVE_16_TO_16(buffer, &temp16);
- buffer += 2;
-
- /* Set the Information Byte */
-
- temp8 =
- (u8) (linked_list->data.fixed_memory32.read_write_attribute & 0x01);
- *buffer = temp8;
- buffer += 1;
-
- /* Set the Range base address */
-
- ACPI_MOVE_32_TO_32(buffer,
- &linked_list->data.fixed_memory32.
- range_base_address);
- buffer += 4;
-
- /* Set the range length */
-
- ACPI_MOVE_32_TO_32(buffer,
- &linked_list->data.fixed_memory32.range_length);
- buffer += 4;
-
- /* Return the number of bytes consumed in this operation */
-
- *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
- return_ACPI_STATUS(AE_OK);
-}
+ {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.vendor.byte_data[0]),
+ sizeof(struct aml_resource_large_header),
+ 0}
+};
diff --git a/drivers/acpi/resources/rsmisc.c b/drivers/acpi/resources/rsmisc.c
index 7a8a34e..ed866cf 100644
--- a/drivers/acpi/resources/rsmisc.c
+++ b/drivers/acpi/resources/rsmisc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -47,481 +47,501 @@
#define _COMPONENT ACPI_RESOURCES
ACPI_MODULE_NAME("rsmisc")
+#define INIT_RESOURCE_TYPE(i) i->resource_offset
+#define INIT_RESOURCE_LENGTH(i) i->aml_offset
+#define INIT_TABLE_LENGTH(i) i->value
+#define COMPARE_OPCODE(i) i->resource_offset
+#define COMPARE_TARGET(i) i->aml_offset
+#define COMPARE_VALUE(i) i->value
/*******************************************************************************
*
- * FUNCTION: acpi_rs_end_tag_resource
+ * FUNCTION: acpi_rs_convert_aml_to_resource
*
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
+ * PARAMETERS: Resource - Pointer to the resource descriptor
+ * Aml - Where the AML descriptor is returned
+ * Info - Pointer to appropriate conversion table
*
* RETURN: Status
*
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
+ * DESCRIPTION: Convert an external AML resource descriptor to the corresponding
+ * internal resource descriptor
*
******************************************************************************/
acpi_status
-acpi_rs_end_tag_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size)
+acpi_rs_convert_aml_to_resource(struct acpi_resource *resource,
+ union aml_resource *aml,
+ struct acpi_rsconvert_info *info)
{
- struct acpi_resource *output_struct = (void *)*output_buffer;
- acpi_size struct_size = ACPI_RESOURCE_LENGTH;
+ acpi_rs_length aml_resource_length;
+ void *source;
+ void *destination;
+ char *target;
+ u8 count;
+ u8 flags_mode = FALSE;
+ u16 item_count = 0;
+ u16 temp16 = 0;
- ACPI_FUNCTION_TRACE("rs_end_tag_resource");
+ ACPI_FUNCTION_TRACE("rs_get_resource");
- /* The number of bytes consumed is static */
+ if (((acpi_native_uint) resource) & 0x3) {
+ /* Each internal resource struct is expected to be 32-bit aligned */
- *bytes_consumed = 2;
+ ACPI_WARNING((AE_INFO,
+ "Misaligned resource pointer (get): %p Type %2.2X Len %X",
+ resource, resource->type, resource->length));
+ }
- /* Fill out the structure */
+ /* Extract the resource Length field (does not include header length) */
- output_struct->id = ACPI_RSTYPE_END_TAG;
-
- /* Set the Length parameter */
-
- output_struct->length = 0;
-
- /* Return the final size of the structure */
-
- *structure_size = struct_size;
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_end_tag_stream
- *
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - Pointer to where the number of bytes
- * used in the output_buffer is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
- *
- ******************************************************************************/
-
-acpi_status
-acpi_rs_end_tag_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
-{
- u8 *buffer = *output_buffer;
- u8 temp8 = 0;
-
- ACPI_FUNCTION_TRACE("rs_end_tag_stream");
-
- /* The descriptor field is static */
-
- *buffer = 0x79;
- buffer += 1;
+ aml_resource_length = acpi_ut_get_resource_length(aml);
/*
- * Set the Checksum - zero means that the resource data is treated as if
- * the checksum operation succeeded (ACPI Spec 1.0b Section 6.4.2.8)
+ * First table entry must be ACPI_RSC_INITxxx and must contain the
+ * table length (# of table entries)
*/
- temp8 = 0;
+ count = INIT_TABLE_LENGTH(info);
- *buffer = temp8;
- buffer += 1;
+ while (count) {
+ /*
+ * Source is the external AML byte stream buffer,
+ * destination is the internal resource descriptor
+ */
+ source = ACPI_ADD_PTR(void, aml, info->aml_offset);
+ destination =
+ ACPI_ADD_PTR(void, resource, info->resource_offset);
- /* Return the number of bytes consumed in this operation */
+ switch (info->opcode) {
+ case ACPI_RSC_INITGET:
+ /*
+ * Get the resource type and the initial (minimum) length
+ */
+ ACPI_MEMSET(resource, 0, INIT_RESOURCE_LENGTH(info));
+ resource->type = INIT_RESOURCE_TYPE(info);
+ resource->length = INIT_RESOURCE_LENGTH(info);
+ break;
- *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
- return_ACPI_STATUS(AE_OK);
-}
+ case ACPI_RSC_INITSET:
+ break;
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_vendor_resource
- *
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
- *
- ******************************************************************************/
+ case ACPI_RSC_FLAGINIT:
-acpi_status
-acpi_rs_vendor_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size)
-{
- u8 *buffer = byte_stream_buffer;
- struct acpi_resource *output_struct = (void *)*output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
- u8 index;
- acpi_size struct_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_vendor);
+ flags_mode = TRUE;
+ break;
- ACPI_FUNCTION_TRACE("rs_vendor_resource");
+ case ACPI_RSC_1BITFLAG:
+ /*
+ * Mask and shift the flag bit
+ */
+ ACPI_SET8(destination) = (u8)
+ ((ACPI_GET8(source) >> info->value) & 0x01);
+ break;
- /* Dereference the Descriptor to find if this is a large or small item. */
+ case ACPI_RSC_2BITFLAG:
+ /*
+ * Mask and shift the flag bits
+ */
+ ACPI_SET8(destination) = (u8)
+ ((ACPI_GET8(source) >> info->value) & 0x03);
+ break;
- temp8 = *buffer;
+ case ACPI_RSC_COUNT:
- if (temp8 & 0x80) {
- /* Large Item, point to the length field */
+ item_count = ACPI_GET8(source);
+ ACPI_SET8(destination) = (u8) item_count;
- buffer += 1;
+ resource->length = resource->length +
+ (info->value * (item_count - 1));
+ break;
- /* Dereference */
+ case ACPI_RSC_COUNT16:
- ACPI_MOVE_16_TO_16(&temp16, buffer);
+ item_count = aml_resource_length;
+ ACPI_SET16(destination) = item_count;
- /* Calculate bytes consumed */
+ resource->length = resource->length +
+ (info->value * (item_count - 1));
+ break;
- *bytes_consumed = (acpi_size) temp16 + 3;
+ case ACPI_RSC_LENGTH:
- /* Point to the first vendor byte */
+ resource->length = resource->length + info->value;
+ break;
- buffer += 2;
- } else {
- /* Small Item, dereference the size */
+ case ACPI_RSC_MOVE8:
+ case ACPI_RSC_MOVE16:
+ case ACPI_RSC_MOVE32:
+ case ACPI_RSC_MOVE64:
+ /*
+ * Raw data move. Use the Info value field unless item_count has
+ * been previously initialized via a COUNT opcode
+ */
+ if (info->value) {
+ item_count = info->value;
+ }
+ acpi_rs_move_data(destination, source, item_count,
+ info->opcode);
+ break;
- temp16 = (u8) (*buffer & 0x07);
+ case ACPI_RSC_SET8:
- /* Calculate bytes consumed */
+ ACPI_MEMSET(destination, info->aml_offset, info->value);
+ break;
- *bytes_consumed = (acpi_size) temp16 + 1;
+ case ACPI_RSC_DATA8:
- /* Point to the first vendor byte */
+ target = ACPI_ADD_PTR(char, resource, info->value);
+ ACPI_MEMCPY(destination, source, ACPI_GET16(target));
+ break;
- buffer += 1;
- }
+ case ACPI_RSC_ADDRESS:
+ /*
+ * Common handler for address descriptor flags
+ */
+ if (!acpi_rs_get_address_common(resource, aml)) {
+ return_ACPI_STATUS
+ (AE_AML_INVALID_RESOURCE_TYPE);
+ }
+ break;
- output_struct->id = ACPI_RSTYPE_VENDOR;
- output_struct->data.vendor_specific.length = temp16;
+ case ACPI_RSC_SOURCE:
+ /*
+ * Optional resource_source (Index and String)
+ */
+ resource->length +=
+ acpi_rs_get_resource_source(aml_resource_length,
+ info->value,
+ destination, aml, NULL);
+ break;
- for (index = 0; index < temp16; index++) {
- output_struct->data.vendor_specific.reserved[index] = *buffer;
- buffer += 1;
- }
+ case ACPI_RSC_SOURCEX:
+ /*
+ * Optional resource_source (Index and String). This is the more
+ * complicated case used by the Interrupt() macro
+ */
+ target =
+ ACPI_ADD_PTR(char, resource,
+ info->aml_offset + (item_count * 4));
- /*
- * In order for the struct_size to fall on a 32-bit boundary,
- * calculate the length of the vendor string and expand the
- * struct_size to the next 32-bit boundary.
- */
- struct_size += ACPI_ROUND_UP_to_32_bITS(temp16);
+ resource->length +=
+ acpi_rs_get_resource_source(aml_resource_length,
+ (acpi_rs_length) (((item_count - 1) * sizeof(u32)) + info->value), destination, aml, target);
+ break;
- /* Set the Length parameter */
+ case ACPI_RSC_BITMASK:
+ /*
+ * 8-bit encoded bitmask (DMA macro)
+ */
+ item_count =
+ acpi_rs_decode_bitmask(ACPI_GET8(source),
+ destination);
+ if (item_count) {
+ resource->length += (item_count - 1);
+ }
- output_struct->length = (u32) struct_size;
+ target = ACPI_ADD_PTR(char, resource, info->value);
+ ACPI_SET8(target) = (u8) item_count;
+ break;
- /* Return the final size of the structure */
+ case ACPI_RSC_BITMASK16:
+ /*
+ * 16-bit encoded bitmask (IRQ macro)
+ */
+ ACPI_MOVE_16_TO_16(&temp16, source);
- *structure_size = struct_size;
- return_ACPI_STATUS(AE_OK);
-}
+ item_count =
+ acpi_rs_decode_bitmask(temp16, destination);
+ if (item_count) {
+ resource->length += (item_count - 1);
+ }
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_vendor_stream
- *
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - Pointer to where the number of bytes
- * used in the output_buffer is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
- *
- ******************************************************************************/
+ target = ACPI_ADD_PTR(char, resource, info->value);
+ ACPI_SET8(target) = (u8) item_count;
+ break;
-acpi_status
-acpi_rs_vendor_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
-{
- u8 *buffer = *output_buffer;
- u16 temp16 = 0;
- u8 temp8 = 0;
- u8 index;
+ case ACPI_RSC_EXIT_NE:
+ /*
+ * Control - Exit conversion if not equal
+ */
+ switch (info->resource_offset) {
+ case ACPI_RSC_COMPARE_AML_LENGTH:
+ if (aml_resource_length != info->value) {
+ goto exit;
+ }
+ break;
- ACPI_FUNCTION_TRACE("rs_vendor_stream");
+ case ACPI_RSC_COMPARE_VALUE:
+ if (ACPI_GET8(source) != info->value) {
+ goto exit;
+ }
+ break;
- /* Dereference the length to find if this is a large or small item. */
+ default:
- if (linked_list->data.vendor_specific.length > 7) {
- /* Large Item, Set the descriptor field and length bytes */
+ ACPI_ERROR((AE_INFO,
+ "Invalid conversion sub-opcode"));
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+ break;
- *buffer = 0x84;
- buffer += 1;
+ default:
- temp16 = (u16) linked_list->data.vendor_specific.length;
-
- ACPI_MOVE_16_TO_16(buffer, &temp16);
- buffer += 2;
- } else {
- /* Small Item, Set the descriptor field */
-
- temp8 = 0x70;
- temp8 |= (u8) linked_list->data.vendor_specific.length;
-
- *buffer = temp8;
- buffer += 1;
- }
-
- /* Loop through all of the Vendor Specific fields */
-
- for (index = 0; index < linked_list->data.vendor_specific.length;
- index++) {
- temp8 = linked_list->data.vendor_specific.reserved[index];
-
- *buffer = temp8;
- buffer += 1;
- }
-
- /* Return the number of bytes consumed in this operation */
-
- *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_start_depend_fns_resource
- *
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_rs_start_depend_fns_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer,
- acpi_size * structure_size)
-{
- u8 *buffer = byte_stream_buffer;
- struct acpi_resource *output_struct = (void *)*output_buffer;
- u8 temp8 = 0;
- acpi_size struct_size =
- ACPI_SIZEOF_RESOURCE(struct acpi_resource_start_dpf);
-
- ACPI_FUNCTION_TRACE("rs_start_depend_fns_resource");
-
- /* The number of bytes consumed are found in the descriptor (Bits:0-1) */
-
- temp8 = *buffer;
-
- *bytes_consumed = (temp8 & 0x01) + 1;
-
- output_struct->id = ACPI_RSTYPE_START_DPF;
-
- /* Point to Byte 1 if it is used */
-
- if (2 == *bytes_consumed) {
- buffer += 1;
- temp8 = *buffer;
-
- /* Check Compatibility priority */
-
- output_struct->data.start_dpf.compatibility_priority =
- temp8 & 0x03;
-
- if (3 == output_struct->data.start_dpf.compatibility_priority) {
- return_ACPI_STATUS(AE_AML_BAD_RESOURCE_VALUE);
+ ACPI_ERROR((AE_INFO, "Invalid conversion opcode"));
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- /* Check Performance/Robustness preference */
-
- output_struct->data.start_dpf.performance_robustness =
- (temp8 >> 2) & 0x03;
-
- if (3 == output_struct->data.start_dpf.performance_robustness) {
- return_ACPI_STATUS(AE_AML_BAD_RESOURCE_VALUE);
- }
- } else {
- output_struct->data.start_dpf.compatibility_priority =
- ACPI_ACCEPTABLE_CONFIGURATION;
-
- output_struct->data.start_dpf.performance_robustness =
- ACPI_ACCEPTABLE_CONFIGURATION;
+ count--;
+ info++;
}
- /* Set the Length parameter */
+ exit:
+ if (!flags_mode) {
+ /* Round the resource struct length up to the next 32-bit boundary */
- output_struct->length = (u32) struct_size;
-
- /* Return the final size of the structure */
-
- *structure_size = struct_size;
+ resource->length = ACPI_ROUND_UP_to_32_bITS(resource->length);
+ }
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
- * FUNCTION: acpi_rs_end_depend_fns_resource
+ * FUNCTION: acpi_rs_convert_resource_to_aml
*
- * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
- * stream
- * bytes_consumed - Pointer to where the number of bytes
- * consumed the byte_stream_buffer is
- * returned
- * output_buffer - Pointer to the return data buffer
- * structure_size - Pointer to where the number of bytes
- * in the return data struct is returned
+ * PARAMETERS: Resource - Pointer to the resource descriptor
+ * Aml - Where the AML descriptor is returned
+ * Info - Pointer to appropriate conversion table
*
* RETURN: Status
*
- * DESCRIPTION: Take the resource byte stream and fill out the appropriate
- * structure pointed to by the output_buffer. Return the
- * number of bytes consumed from the byte stream.
+ * DESCRIPTION: Convert an internal resource descriptor to the corresponding
+ * external AML resource descriptor.
*
******************************************************************************/
acpi_status
-acpi_rs_end_depend_fns_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size)
+acpi_rs_convert_resource_to_aml(struct acpi_resource *resource,
+ union aml_resource *aml,
+ struct acpi_rsconvert_info *info)
{
- struct acpi_resource *output_struct = (void *)*output_buffer;
- acpi_size struct_size = ACPI_RESOURCE_LENGTH;
+ void *source = NULL;
+ void *destination;
+ acpi_rsdesc_size aml_length = 0;
+ u8 count;
+ u16 temp16 = 0;
+ u16 item_count = 0;
- ACPI_FUNCTION_TRACE("rs_end_depend_fns_resource");
-
- /* The number of bytes consumed is static */
-
- *bytes_consumed = 1;
-
- /* Fill out the structure */
-
- output_struct->id = ACPI_RSTYPE_END_DPF;
-
- /* Set the Length parameter */
-
- output_struct->length = (u32) struct_size;
-
- /* Return the final size of the structure */
-
- *structure_size = struct_size;
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_start_depend_fns_stream
- *
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - u32 pointer that is filled with
- * the number of bytes of the
- * output_buffer used
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
- *
- ******************************************************************************/
-
-acpi_status
-acpi_rs_start_depend_fns_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
-{
- u8 *buffer = *output_buffer;
- u8 temp8 = 0;
-
- ACPI_FUNCTION_TRACE("rs_start_depend_fns_stream");
+ ACPI_FUNCTION_TRACE("rs_convert_resource_to_aml");
/*
- * The descriptor field is set based upon whether a byte is needed
- * to contain Priority data.
+ * First table entry must be ACPI_RSC_INITxxx and must contain the
+ * table length (# of table entries)
*/
- if (ACPI_ACCEPTABLE_CONFIGURATION ==
- linked_list->data.start_dpf.compatibility_priority &&
- ACPI_ACCEPTABLE_CONFIGURATION ==
- linked_list->data.start_dpf.performance_robustness) {
- *buffer = 0x30;
- } else {
- *buffer = 0x31;
- buffer += 1;
+ count = INIT_TABLE_LENGTH(info);
- /* Set the Priority Byte Definition */
+ while (count) {
+ /*
+ * Source is the internal resource descriptor,
+ * destination is the external AML byte stream buffer
+ */
+ source = ACPI_ADD_PTR(void, resource, info->resource_offset);
+ destination = ACPI_ADD_PTR(void, aml, info->aml_offset);
- temp8 = 0;
- temp8 =
- (u8) ((linked_list->data.start_dpf.
- performance_robustness & 0x03) << 2);
- temp8 |=
- (linked_list->data.start_dpf.compatibility_priority & 0x03);
- *buffer = temp8;
+ switch (info->opcode) {
+ case ACPI_RSC_INITSET:
+
+ ACPI_MEMSET(aml, 0, INIT_RESOURCE_LENGTH(info));
+ aml_length = INIT_RESOURCE_LENGTH(info);
+ acpi_rs_set_resource_header(INIT_RESOURCE_TYPE(info),
+ aml_length, aml);
+ break;
+
+ case ACPI_RSC_INITGET:
+ break;
+
+ case ACPI_RSC_FLAGINIT:
+ /*
+ * Clear the flag byte
+ */
+ ACPI_SET8(destination) = 0;
+ break;
+
+ case ACPI_RSC_1BITFLAG:
+ /*
+ * Mask and shift the flag bit
+ */
+ ACPI_SET8(destination) |= (u8)
+ ((ACPI_GET8(source) & 0x01) << info->value);
+ break;
+
+ case ACPI_RSC_2BITFLAG:
+ /*
+ * Mask and shift the flag bits
+ */
+ ACPI_SET8(destination) |= (u8)
+ ((ACPI_GET8(source) & 0x03) << info->value);
+ break;
+
+ case ACPI_RSC_COUNT:
+
+ item_count = ACPI_GET8(source);
+ ACPI_SET8(destination) = (u8) item_count;
+
+ aml_length =
+ (u16) (aml_length +
+ (info->value * (item_count - 1)));
+ break;
+
+ case ACPI_RSC_COUNT16:
+
+ item_count = ACPI_GET16(source);
+ aml_length = (u16) (aml_length + item_count);
+ acpi_rs_set_resource_length(aml_length, aml);
+ break;
+
+ case ACPI_RSC_LENGTH:
+
+ acpi_rs_set_resource_length(info->value, aml);
+ break;
+
+ case ACPI_RSC_MOVE8:
+ case ACPI_RSC_MOVE16:
+ case ACPI_RSC_MOVE32:
+ case ACPI_RSC_MOVE64:
+
+ if (info->value) {
+ item_count = info->value;
+ }
+ acpi_rs_move_data(destination, source, item_count,
+ info->opcode);
+ break;
+
+ case ACPI_RSC_ADDRESS:
+
+ /* Set the Resource Type, General Flags, and Type-Specific Flags */
+
+ acpi_rs_set_address_common(aml, resource);
+ break;
+
+ case ACPI_RSC_SOURCEX:
+ /*
+ * Optional resource_source (Index and String)
+ */
+ aml_length =
+ acpi_rs_set_resource_source(aml,
+ (acpi_rs_length)
+ aml_length, source);
+ acpi_rs_set_resource_length(aml_length, aml);
+ break;
+
+ case ACPI_RSC_SOURCE:
+ /*
+ * Optional resource_source (Index and String). This is the more
+ * complicated case used by the Interrupt() macro
+ */
+ aml_length =
+ acpi_rs_set_resource_source(aml, info->value,
+ source);
+ acpi_rs_set_resource_length(aml_length, aml);
+ break;
+
+ case ACPI_RSC_BITMASK:
+ /*
+ * 8-bit encoded bitmask (DMA macro)
+ */
+ ACPI_SET8(destination) = (u8)
+ acpi_rs_encode_bitmask(source,
+ *ACPI_ADD_PTR(u8, resource,
+ info->value));
+ break;
+
+ case ACPI_RSC_BITMASK16:
+ /*
+ * 16-bit encoded bitmask (IRQ macro)
+ */
+ temp16 = acpi_rs_encode_bitmask(source,
+ *ACPI_ADD_PTR(u8,
+ resource,
+ info->
+ value));
+ ACPI_MOVE_16_TO_16(destination, &temp16);
+ break;
+
+ case ACPI_RSC_EXIT_LE:
+ /*
+ * Control - Exit conversion if less than or equal
+ */
+ if (item_count <= info->value) {
+ goto exit;
+ }
+ break;
+
+ case ACPI_RSC_EXIT_NE:
+ /*
+ * Control - Exit conversion if not equal
+ */
+ switch (COMPARE_OPCODE(info)) {
+ case ACPI_RSC_COMPARE_VALUE:
+
+ if (*ACPI_ADD_PTR(u8, resource,
+ COMPARE_TARGET(info)) !=
+ COMPARE_VALUE(info)) {
+ goto exit;
+ }
+ break;
+
+ default:
+
+ ACPI_ERROR((AE_INFO,
+ "Invalid conversion sub-opcode"));
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+ break;
+
+ default:
+
+ ACPI_ERROR((AE_INFO, "Invalid conversion opcode"));
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ count--;
+ info++;
}
- buffer += 1;
-
- /* Return the number of bytes consumed in this operation */
-
- *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
+ exit:
return_ACPI_STATUS(AE_OK);
}
-/*******************************************************************************
- *
- * FUNCTION: acpi_rs_end_depend_fns_stream
- *
- * PARAMETERS: linked_list - Pointer to the resource linked list
- * output_buffer - Pointer to the user's return buffer
- * bytes_consumed - Pointer to where the number of bytes
- * used in the output_buffer is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Take the linked list resource structure and fills in the
- * the appropriate bytes in a byte stream
- *
- ******************************************************************************/
+#if 0
+/* Previous resource validations */
-acpi_status
-acpi_rs_end_depend_fns_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed)
-{
- u8 *buffer = *output_buffer;
-
- ACPI_FUNCTION_TRACE("rs_end_depend_fns_stream");
-
- /* The descriptor field is static */
-
- *buffer = 0x38;
- buffer += 1;
-
- /* Return the number of bytes consumed in this operation */
-
- *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
- return_ACPI_STATUS(AE_OK);
+if (aml->ext_address64.revision_iD != AML_RESOURCE_EXTENDED_ADDRESS_REVISION) {
+ return_ACPI_STATUS(AE_SUPPORT);
}
+
+if (resource->data.start_dpf.performance_robustness >= 3) {
+ return_ACPI_STATUS(AE_AML_BAD_RESOURCE_VALUE);
+}
+
+if (((aml->irq.flags & 0x09) == 0x00) || ((aml->irq.flags & 0x09) == 0x09)) {
+ /*
+ * Only [active_high, edge_sensitive] or [active_low, level_sensitive]
+ * polarity/trigger interrupts are allowed (ACPI spec, section
+ * "IRQ Format"), so 0x00 and 0x09 are illegal.
+ */
+ ACPI_ERROR((AE_INFO,
+ "Invalid interrupt polarity/trigger in resource list, %X",
+ aml->irq.flags));
+ return_ACPI_STATUS(AE_BAD_DATA);
+}
+
+resource->data.extended_irq.interrupt_count = temp8;
+if (temp8 < 1) {
+ /* Must have at least one IRQ */
+
+ return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
+}
+
+if (resource->data.dma.transfer == 0x03) {
+ ACPI_ERROR((AE_INFO, "Invalid DMA.Transfer preference (3)"));
+ return_ACPI_STATUS(AE_BAD_DATA);
+}
+#endif
diff --git a/drivers/acpi/resources/rsutils.c b/drivers/acpi/resources/rsutils.c
index 4446778..25b5aed 100644
--- a/drivers/acpi/resources/rsutils.c
+++ b/drivers/acpi/resources/rsutils.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -50,6 +50,389 @@
/*******************************************************************************
*
+ * FUNCTION: acpi_rs_decode_bitmask
+ *
+ * PARAMETERS: Mask - Bitmask to decode
+ * List - Where the converted list is returned
+ *
+ * RETURN: Count of bits set (length of list)
+ *
+ * DESCRIPTION: Convert a bit mask into a list of values
+ *
+ ******************************************************************************/
+u8 acpi_rs_decode_bitmask(u16 mask, u8 * list)
+{
+ acpi_native_uint i;
+ u8 bit_count;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /* Decode the mask bits */
+
+ for (i = 0, bit_count = 0; mask; i++) {
+ if (mask & 0x0001) {
+ list[bit_count] = (u8) i;
+ bit_count++;
+ }
+
+ mask >>= 1;
+ }
+
+ return (bit_count);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_encode_bitmask
+ *
+ * PARAMETERS: List - List of values to encode
+ * Count - Length of list
+ *
+ * RETURN: Encoded bitmask
+ *
+ * DESCRIPTION: Convert a list of values to an encoded bitmask
+ *
+ ******************************************************************************/
+
+u16 acpi_rs_encode_bitmask(u8 * list, u8 count)
+{
+ acpi_native_uint i;
+ u16 mask;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /* Encode the list into a single bitmask */
+
+ for (i = 0, mask = 0; i < count; i++) {
+ mask |= (0x0001 << list[i]);
+ }
+
+ return (mask);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_move_data
+ *
+ * PARAMETERS: Destination - Pointer to the destination descriptor
+ * Source - Pointer to the source descriptor
+ * item_count - How many items to move
+ * move_type - Byte width
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Move multiple data items from one descriptor to another. Handles
+ * alignment issues and endian issues if necessary, as configured
+ * via the ACPI_MOVE_* macros. (This is why a memcpy is not used)
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type)
+{
+ acpi_native_uint i;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /* One move per item */
+
+ for (i = 0; i < item_count; i++) {
+ switch (move_type) {
+ /*
+ * For the 8-bit case, we can perform the move all at once
+ * since there are no alignment or endian issues
+ */
+ case ACPI_RSC_MOVE8:
+ ACPI_MEMCPY(destination, source, item_count);
+ return;
+
+ /*
+ * 16-, 32-, and 64-bit cases must use the move macros that perform
+ * endian conversion and/or accomodate hardware that cannot perform
+ * misaligned memory transfers
+ */
+ case ACPI_RSC_MOVE16:
+ ACPI_MOVE_16_TO_16(&ACPI_CAST_PTR(u16, destination)[i],
+ &ACPI_CAST_PTR(u16, source)[i]);
+ break;
+
+ case ACPI_RSC_MOVE32:
+ ACPI_MOVE_32_TO_32(&ACPI_CAST_PTR(u32, destination)[i],
+ &ACPI_CAST_PTR(u32, source)[i]);
+ break;
+
+ case ACPI_RSC_MOVE64:
+ ACPI_MOVE_64_TO_64(&ACPI_CAST_PTR(u64, destination)[i],
+ &ACPI_CAST_PTR(u64, source)[i]);
+ break;
+
+ default:
+ return;
+ }
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_set_resource_length
+ *
+ * PARAMETERS: total_length - Length of the AML descriptor, including
+ * the header and length fields.
+ * Aml - Pointer to the raw AML descriptor
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Set the resource_length field of an AML
+ * resource descriptor, both Large and Small descriptors are
+ * supported automatically. Note: Descriptor Type field must
+ * be valid.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_set_resource_length(acpi_rsdesc_size total_length,
+ union aml_resource *aml)
+{
+ acpi_rs_length resource_length;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /* Length is the total descriptor length minus the header length */
+
+ resource_length = (acpi_rs_length)
+ (total_length - acpi_ut_get_resource_header_length(aml));
+
+ /* Length is stored differently for large and small descriptors */
+
+ if (aml->small_header.descriptor_type & ACPI_RESOURCE_NAME_LARGE) {
+ /* Large descriptor -- bytes 1-2 contain the 16-bit length */
+
+ ACPI_MOVE_16_TO_16(&aml->large_header.resource_length,
+ &resource_length);
+ } else {
+ /* Small descriptor -- bits 2:0 of byte 0 contain the length */
+
+ aml->small_header.descriptor_type = (u8)
+
+ /* Clear any existing length, preserving descriptor type bits */
+ ((aml->small_header.
+ descriptor_type & ~ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK)
+
+ | resource_length);
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_set_resource_header
+ *
+ * PARAMETERS: descriptor_type - Byte to be inserted as the type
+ * total_length - Length of the AML descriptor, including
+ * the header and length fields.
+ * Aml - Pointer to the raw AML descriptor
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Set the descriptor_type and resource_length fields of an AML
+ * resource descriptor, both Large and Small descriptors are
+ * supported automatically
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_set_resource_header(u8 descriptor_type,
+ acpi_rsdesc_size total_length,
+ union aml_resource *aml)
+{
+ ACPI_FUNCTION_ENTRY();
+
+ /* Set the Resource Type */
+
+ aml->small_header.descriptor_type = descriptor_type;
+
+ /* Set the Resource Length */
+
+ acpi_rs_set_resource_length(total_length, aml);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_strcpy
+ *
+ * PARAMETERS: Destination - Pointer to the destination string
+ * Source - Pointer to the source string
+ *
+ * RETURN: String length, including NULL terminator
+ *
+ * DESCRIPTION: Local string copy that returns the string length, saving a
+ * strcpy followed by a strlen.
+ *
+ ******************************************************************************/
+
+static u16 acpi_rs_strcpy(char *destination, char *source)
+{
+ u16 i;
+
+ ACPI_FUNCTION_ENTRY();
+
+ for (i = 0; source[i]; i++) {
+ destination[i] = source[i];
+ }
+
+ destination[i] = 0;
+
+ /* Return string length including the NULL terminator */
+
+ return ((u16) (i + 1));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_get_resource_source
+ *
+ * PARAMETERS: resource_length - Length field of the descriptor
+ * minimum_length - Minimum length of the descriptor (minus
+ * any optional fields)
+ * resource_source - Where the resource_source is returned
+ * Aml - Pointer to the raw AML descriptor
+ * string_ptr - (optional) where to store the actual
+ * resource_source string
+ *
+ * RETURN: Length of the string plus NULL terminator, rounded up to 32 bit
+ *
+ * DESCRIPTION: Copy the optional resource_source data from a raw AML descriptor
+ * to an internal resource descriptor
+ *
+ ******************************************************************************/
+
+acpi_rs_length
+acpi_rs_get_resource_source(acpi_rs_length resource_length,
+ acpi_rs_length minimum_length,
+ struct acpi_resource_source * resource_source,
+ union aml_resource * aml, char *string_ptr)
+{
+ acpi_rsdesc_size total_length;
+ u8 *aml_resource_source;
+
+ ACPI_FUNCTION_ENTRY();
+
+ total_length =
+ resource_length + sizeof(struct aml_resource_large_header);
+ aml_resource_source = ACPI_ADD_PTR(u8, aml, minimum_length);
+
+ /*
+ * resource_source is present if the length of the descriptor is longer than
+ * the minimum length.
+ *
+ * Note: Some resource descriptors will have an additional null, so
+ * we add 1 to the minimum length.
+ */
+ if (total_length > (acpi_rsdesc_size) (minimum_length + 1)) {
+ /* Get the resource_source_index */
+
+ resource_source->index = aml_resource_source[0];
+
+ resource_source->string_ptr = string_ptr;
+ if (!string_ptr) {
+ /*
+ * String destination pointer is not specified; Set the String
+ * pointer to the end of the current resource_source structure.
+ */
+ resource_source->string_ptr =
+ ACPI_ADD_PTR(char, resource_source,
+ sizeof(struct acpi_resource_source));
+ }
+
+ /*
+ * In order for the struct_size to fall on a 32-bit boundary, calculate
+ * the length of the string (+1 for the NULL terminator) and expand the
+ * struct_size to the next 32-bit boundary.
+ *
+ * Zero the entire area of the buffer.
+ */
+ total_length =
+ ACPI_ROUND_UP_to_32_bITS(ACPI_STRLEN
+ ((char *)&aml_resource_source[1]) +
+ 1);
+ ACPI_MEMSET(resource_source->string_ptr, 0, total_length);
+
+ /* Copy the resource_source string to the destination */
+
+ resource_source->string_length =
+ acpi_rs_strcpy(resource_source->string_ptr,
+ (char *)&aml_resource_source[1]);
+
+ return ((acpi_rs_length) total_length);
+ }
+
+ /* resource_source is not present */
+
+ resource_source->index = 0;
+ resource_source->string_length = 0;
+ resource_source->string_ptr = NULL;
+ return (0);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_set_resource_source
+ *
+ * PARAMETERS: Aml - Pointer to the raw AML descriptor
+ * minimum_length - Minimum length of the descriptor (minus
+ * any optional fields)
+ * resource_source - Internal resource_source
+
+ *
+ * RETURN: Total length of the AML descriptor
+ *
+ * DESCRIPTION: Convert an optional resource_source from internal format to a
+ * raw AML resource descriptor
+ *
+ ******************************************************************************/
+
+acpi_rsdesc_size
+acpi_rs_set_resource_source(union aml_resource * aml,
+ acpi_rs_length minimum_length,
+ struct acpi_resource_source * resource_source)
+{
+ u8 *aml_resource_source;
+ acpi_rsdesc_size descriptor_length;
+
+ ACPI_FUNCTION_ENTRY();
+
+ descriptor_length = minimum_length;
+
+ /* Non-zero string length indicates presence of a resource_source */
+
+ if (resource_source->string_length) {
+ /* Point to the end of the AML descriptor */
+
+ aml_resource_source = ACPI_ADD_PTR(u8, aml, minimum_length);
+
+ /* Copy the resource_source_index */
+
+ aml_resource_source[0] = (u8) resource_source->index;
+
+ /* Copy the resource_source string */
+
+ ACPI_STRCPY((char *)&aml_resource_source[1],
+ resource_source->string_ptr);
+
+ /*
+ * Add the length of the string (+ 1 for null terminator) to the
+ * final descriptor length
+ */
+ descriptor_length +=
+ ((acpi_rsdesc_size) resource_source->string_length + 1);
+ }
+
+ /* Return the new total length of the AML descriptor */
+
+ return (descriptor_length);
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_rs_get_prt_method_data
*
* PARAMETERS: Handle - a handle to the containing object
@@ -65,8 +448,9 @@
* and the contents of the callers buffer is undefined.
*
******************************************************************************/
+
acpi_status
-acpi_rs_get_prt_method_data(acpi_handle handle, struct acpi_buffer *ret_buffer)
+acpi_rs_get_prt_method_data(acpi_handle handle, struct acpi_buffer * ret_buffer)
{
union acpi_operand_object *obj_desc;
acpi_status status;
@@ -284,7 +668,7 @@
* Convert the linked list into a byte stream
*/
buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
- status = acpi_rs_create_byte_stream(in_buffer->pointer, &buffer);
+ status = acpi_rs_create_aml_resources(in_buffer->pointer, &buffer);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/resources/rsxface.c b/drivers/acpi/resources/rsxface.c
index ee5a5c5..88b6707 100644
--- a/drivers/acpi/resources/rsxface.c
+++ b/drivers/acpi/resources/rsxface.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -57,13 +57,17 @@
ACPI_COPY_FIELD(out, in, decode); \
ACPI_COPY_FIELD(out, in, min_address_fixed); \
ACPI_COPY_FIELD(out, in, max_address_fixed); \
- ACPI_COPY_FIELD(out, in, attribute); \
+ ACPI_COPY_FIELD(out, in, info); \
ACPI_COPY_FIELD(out, in, granularity); \
- ACPI_COPY_FIELD(out, in, min_address_range); \
- ACPI_COPY_FIELD(out, in, max_address_range); \
- ACPI_COPY_FIELD(out, in, address_translation_offset); \
+ ACPI_COPY_FIELD(out, in, minimum); \
+ ACPI_COPY_FIELD(out, in, maximum); \
+ ACPI_COPY_FIELD(out, in, translation_offset); \
ACPI_COPY_FIELD(out, in, address_length); \
ACPI_COPY_FIELD(out, in, resource_source);
+/* Local prototypes */
+static acpi_status
+acpi_rs_match_vendor_resource(struct acpi_resource *resource, void *context);
+
/*******************************************************************************
*
* FUNCTION: acpi_get_irq_routing_table
@@ -86,6 +90,7 @@
* the object indicated by the passed device_handle.
*
******************************************************************************/
+
acpi_status
acpi_get_irq_routing_table(acpi_handle device_handle,
struct acpi_buffer *ret_buffer)
@@ -222,12 +227,12 @@
*
* FUNCTION: acpi_walk_resources
*
- * PARAMETERS: device_handle - a handle to the device object for the
+ * PARAMETERS: device_handle - Handle to the device object for the
* device we are querying
- * Path - method name of the resources we want
+ * Name - Method name of the resources we want
* (METHOD_NAME__CRS or METHOD_NAME__PRS)
- * user_function - called for each resource
- * Context - passed to user_function
+ * user_function - Called for each resource
+ * Context - Passed to user_function
*
* RETURN: Status
*
@@ -239,79 +244,74 @@
acpi_status
acpi_walk_resources(acpi_handle device_handle,
- char *path,
+ char *name,
ACPI_WALK_RESOURCE_CALLBACK user_function, void *context)
{
acpi_status status;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_buffer buffer;
struct acpi_resource *resource;
- struct acpi_resource *buffer_end;
+ struct acpi_resource *resource_end;
ACPI_FUNCTION_TRACE("acpi_walk_resources");
- if (!device_handle ||
- (ACPI_STRNCMP(path, METHOD_NAME__CRS, sizeof(METHOD_NAME__CRS)) &&
- ACPI_STRNCMP(path, METHOD_NAME__PRS, sizeof(METHOD_NAME__PRS)))) {
+ /* Parameter validation */
+
+ if (!device_handle || !user_function || !name ||
+ (ACPI_STRNCMP(name, METHOD_NAME__CRS, sizeof(METHOD_NAME__CRS)) &&
+ ACPI_STRNCMP(name, METHOD_NAME__PRS, sizeof(METHOD_NAME__PRS)))) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- status = acpi_rs_get_method_data(device_handle, path, &buffer);
+ /* Get the _CRS or _PRS resource list */
+
+ buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
+ status = acpi_rs_get_method_data(device_handle, name, &buffer);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
- /* Setup pointers */
+ /* Buffer now contains the resource list */
- resource = (struct acpi_resource *)buffer.pointer;
- buffer_end = ACPI_CAST_PTR(struct acpi_resource,
- ((u8 *) buffer.pointer + buffer.length));
+ resource = ACPI_CAST_PTR(struct acpi_resource, buffer.pointer);
+ resource_end =
+ ACPI_ADD_PTR(struct acpi_resource, buffer.pointer, buffer.length);
- /* Walk the resource list */
+ /* Walk the resource list until the end_tag is found (or buffer end) */
- for (;;) {
- if (!resource || resource->id == ACPI_RSTYPE_END_TAG) {
+ while (resource < resource_end) {
+ /* Sanity check the resource */
+
+ if (resource->type > ACPI_RESOURCE_TYPE_MAX) {
+ status = AE_AML_INVALID_RESOURCE_TYPE;
break;
}
+ /* Invoke the user function, abort on any error returned */
+
status = user_function(resource, context);
+ if (ACPI_FAILURE(status)) {
+ if (status == AE_CTRL_TERMINATE) {
+ /* This is an OK termination by the user function */
- switch (status) {
- case AE_OK:
- case AE_CTRL_DEPTH:
-
- /* Just keep going */
-
- status = AE_OK;
+ status = AE_OK;
+ }
break;
+ }
- case AE_CTRL_TERMINATE:
+ /* end_tag indicates end-of-list */
- /* Exit now, with OK stats */
-
- status = AE_OK;
- goto cleanup;
-
- default:
-
- /* All others are valid exceptions */
-
- goto cleanup;
+ if (resource->type == ACPI_RESOURCE_TYPE_END_TAG) {
+ break;
}
/* Get the next resource descriptor */
- resource = ACPI_NEXT_RESOURCE(resource);
-
- /* Check for end-of-buffer */
-
- if (resource >= buffer_end) {
- goto cleanup;
- }
+ resource =
+ ACPI_ADD_PTR(struct acpi_resource, resource,
+ resource->length);
}
- cleanup:
-
- acpi_os_free(buffer.pointer);
+ ACPI_MEM_FREE(buffer.pointer);
return_ACPI_STATUS(status);
}
@@ -360,8 +360,8 @@
*
* FUNCTION: acpi_resource_to_address64
*
- * PARAMETERS: resource - Pointer to a resource
- * out - Pointer to the users's return
+ * PARAMETERS: Resource - Pointer to a resource
+ * Out - Pointer to the users's return
* buffer (a struct
* struct acpi_resource_address64)
*
@@ -381,20 +381,26 @@
struct acpi_resource_address16 *address16;
struct acpi_resource_address32 *address32;
- switch (resource->id) {
- case ACPI_RSTYPE_ADDRESS16:
+ if (!resource || !out) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ /* Convert 16 or 32 address descriptor to 64 */
+
+ switch (resource->type) {
+ case ACPI_RESOURCE_TYPE_ADDRESS16:
address16 = (struct acpi_resource_address16 *)&resource->data;
ACPI_COPY_ADDRESS(out, address16);
break;
- case ACPI_RSTYPE_ADDRESS32:
+ case ACPI_RESOURCE_TYPE_ADDRESS32:
address32 = (struct acpi_resource_address32 *)&resource->data;
ACPI_COPY_ADDRESS(out, address32);
break;
- case ACPI_RSTYPE_ADDRESS64:
+ case ACPI_RESOURCE_TYPE_ADDRESS64:
/* Simple copy for 64 bit source */
@@ -410,3 +416,113 @@
}
EXPORT_SYMBOL(acpi_resource_to_address64);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_get_vendor_resource
+ *
+ * PARAMETERS: device_handle - Handle for the parent device object
+ * Name - Method name for the parent resource
+ * (METHOD_NAME__CRS or METHOD_NAME__PRS)
+ * Uuid - Pointer to the UUID to be matched.
+ * includes both subtype and 16-byte UUID
+ * ret_buffer - Where the vendor resource is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Walk a resource template for the specified evice to find a
+ * vendor-defined resource that matches the supplied UUID and
+ * UUID subtype. Returns a struct acpi_resource of type Vendor.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_get_vendor_resource(acpi_handle device_handle,
+ char *name,
+ struct acpi_vendor_uuid * uuid,
+ struct acpi_buffer * ret_buffer)
+{
+ struct acpi_vendor_walk_info info;
+ acpi_status status;
+
+ /* Other parameters are validated by acpi_walk_resources */
+
+ if (!uuid || !ret_buffer) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ info.uuid = uuid;
+ info.buffer = ret_buffer;
+ info.status = AE_NOT_EXIST;
+
+ /* Walk the _CRS or _PRS resource list for this device */
+
+ status =
+ acpi_walk_resources(device_handle, name,
+ acpi_rs_match_vendor_resource, &info);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ return (info.status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_match_vendor_resource
+ *
+ * PARAMETERS: ACPI_WALK_RESOURCE_CALLBACK
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Match a vendor resource via the ACPI 3.0 UUID
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_rs_match_vendor_resource(struct acpi_resource *resource, void *context)
+{
+ struct acpi_vendor_walk_info *info = context;
+ struct acpi_resource_vendor_typed *vendor;
+ struct acpi_buffer *buffer;
+ acpi_status status;
+
+ /* Ignore all descriptors except Vendor */
+
+ if (resource->type != ACPI_RESOURCE_TYPE_VENDOR) {
+ return (AE_OK);
+ }
+
+ vendor = &resource->data.vendor_typed;
+
+ /*
+ * For a valid match, these conditions must hold:
+ *
+ * 1) Length of descriptor data must be at least as long as a UUID struct
+ * 2) The UUID subtypes must match
+ * 3) The UUID data must match
+ */
+ if ((vendor->byte_length < (ACPI_UUID_LENGTH + 1)) ||
+ (vendor->uuid_subtype != info->uuid->subtype) ||
+ (ACPI_MEMCMP(vendor->uuid, info->uuid->data, ACPI_UUID_LENGTH))) {
+ return (AE_OK);
+ }
+
+ /* Validate/Allocate/Clear caller buffer */
+
+ buffer = info->buffer;
+ status = acpi_ut_initialize_buffer(buffer, resource->length);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Found the correct resource, copy and return it */
+
+ ACPI_MEMCPY(buffer->pointer, resource, resource->length);
+ buffer->length = resource->length;
+
+ /* Found the desired descriptor, terminate resource walk */
+
+ info->status = AE_OK;
+ return (AE_CTRL_TERMINATE);
+}
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 3b26a71..9271e52 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -851,7 +851,7 @@
* ----
* Fix for the system root bus device -- the only root-level device.
*/
- if ((parent == ACPI_ROOT_OBJECT) && (type == ACPI_BUS_TYPE_DEVICE)) {
+ if (((acpi_handle)parent == ACPI_ROOT_OBJECT) && (type == ACPI_BUS_TYPE_DEVICE)) {
hid = ACPI_BUS_HID;
strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME);
strcpy(device->pnp.device_class, ACPI_BUS_CLASS);
diff --git a/drivers/acpi/sleep/poweroff.c b/drivers/acpi/sleep/poweroff.c
index af7935a..47fb4b3 100644
--- a/drivers/acpi/sleep/poweroff.c
+++ b/drivers/acpi/sleep/poweroff.c
@@ -33,9 +33,7 @@
ACPI_FLUSH_CPU_CACHE();
acpi_enable_wakeup_device_prep(acpi_state);
#endif
- if (acpi_state == ACPI_STATE_S5) {
- acpi_wakeup_gpe_poweroff_prepare();
- }
+ acpi_gpe_sleep_prepare(acpi_state);
acpi_enter_sleep_state_prep(acpi_state);
return 0;
}
@@ -53,11 +51,16 @@
static int acpi_shutdown(struct sys_device *x)
{
- if (system_state == SYSTEM_POWER_OFF) {
- /* Prepare if we are going to power off the system */
+ switch (system_state) {
+ case SYSTEM_POWER_OFF:
+ /* Prepare to power off the system */
return acpi_sleep_prepare(ACPI_STATE_S5);
+ case SYSTEM_SUSPEND_DISK:
+ /* Prepare to suspend the system to disk */
+ return acpi_sleep_prepare(ACPI_STATE_S4);
+ default:
+ return 0;
}
- return 0;
}
static struct sysdev_class acpi_sysclass = {
diff --git a/drivers/acpi/sleep/sleep.h b/drivers/acpi/sleep/sleep.h
index efd0001..f3e7039 100644
--- a/drivers/acpi/sleep/sleep.h
+++ b/drivers/acpi/sleep/sleep.h
@@ -5,4 +5,4 @@
extern void acpi_enable_wakeup_device_prep(u8 sleep_state);
extern void acpi_enable_wakeup_device(u8 sleep_state);
extern void acpi_disable_wakeup_device(u8 sleep_state);
-extern void acpi_wakeup_gpe_poweroff_prepare(void);
+extern void acpi_gpe_sleep_prepare(u32 sleep_state);
diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c
index 4134ed4..85df0ce 100644
--- a/drivers/acpi/sleep/wakeup.c
+++ b/drivers/acpi/sleep/wakeup.c
@@ -192,7 +192,7 @@
* RUNTIME GPEs, we simply mark all GPES that
* are not enabled for wakeup from S5 as RUNTIME.
*/
-void acpi_wakeup_gpe_poweroff_prepare(void)
+void acpi_gpe_sleep_prepare(u32 sleep_state)
{
struct list_head *node, *next;
@@ -201,8 +201,8 @@
struct acpi_device,
wakeup_list);
- /* The GPE can wakeup system from S5, don't touch it */
- if ((u32) dev->wakeup.sleep_state == ACPI_STATE_S5)
+ /* The GPE can wakeup system from this state, don't touch it */
+ if ((u32) dev->wakeup.sleep_state >= sleep_state)
continue;
/* acpi_set_gpe_type will automatically disable GPE */
acpi_set_gpe_type(dev->wakeup.gpe_device,
diff --git a/drivers/acpi/tables/tbconvrt.c b/drivers/acpi/tables/tbconvrt.c
index a039393..03b37d2 100644
--- a/drivers/acpi/tables/tbconvrt.c
+++ b/drivers/acpi/tables/tbconvrt.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -501,8 +501,8 @@
* at least as long as the version 1.0 FADT
*/
if (acpi_gbl_FADT->length < sizeof(struct fadt_descriptor_rev1)) {
- ACPI_REPORT_ERROR(("FADT is invalid, too short: 0x%X\n",
- acpi_gbl_FADT->length));
+ ACPI_ERROR((AE_INFO, "FADT is invalid, too short: 0x%X",
+ acpi_gbl_FADT->length));
return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
}
@@ -517,7 +517,10 @@
if (acpi_gbl_FADT->length < sizeof(struct fadt_descriptor_rev2)) {
/* Length is too short to be a V2.0 table */
- ACPI_REPORT_WARNING(("Inconsistent FADT length (0x%X) and revision (0x%X), using FADT V1.0 portion of table\n", acpi_gbl_FADT->length, acpi_gbl_FADT->revision));
+ ACPI_WARNING((AE_INFO,
+ "Inconsistent FADT length (0x%X) and revision (0x%X), using FADT V1.0 portion of table",
+ acpi_gbl_FADT->length,
+ acpi_gbl_FADT->revision));
acpi_tb_convert_fadt1(local_fadt,
(void *)acpi_gbl_FADT);
@@ -554,7 +557,9 @@
ACPI_DEBUG_PRINT((ACPI_DB_TABLES,
"Hex dump of common internal FADT, size %d (%X)\n",
acpi_gbl_FADT->length, acpi_gbl_FADT->length));
- ACPI_DUMP_BUFFER((u8 *) (acpi_gbl_FADT), acpi_gbl_FADT->length);
+
+ ACPI_DUMP_BUFFER(ACPI_CAST_PTR(u8, acpi_gbl_FADT),
+ acpi_gbl_FADT->length);
return_ACPI_STATUS(AE_OK);
}
@@ -580,13 +585,15 @@
/* Absolute minimum length is 24, but the ACPI spec says 64 */
if (acpi_gbl_FACS->length < 24) {
- ACPI_REPORT_ERROR(("Invalid FACS table length: 0x%X\n",
- acpi_gbl_FACS->length));
+ ACPI_ERROR((AE_INFO, "Invalid FACS table length: 0x%X",
+ acpi_gbl_FACS->length));
return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
}
if (acpi_gbl_FACS->length < 64) {
- ACPI_REPORT_WARNING(("FACS is shorter than the ACPI specification allows: 0x%X, using anyway\n", acpi_gbl_FACS->length));
+ ACPI_WARNING((AE_INFO,
+ "FACS is shorter than the ACPI specification allows: 0x%X, using anyway",
+ acpi_gbl_FACS->length));
}
/* Copy fields to the new FACS */
diff --git a/drivers/acpi/tables/tbget.c b/drivers/acpi/tables/tbget.c
index 6acd5ae..09b4ee6 100644
--- a/drivers/acpi/tables/tbget.c
+++ b/drivers/acpi/tables/tbget.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -91,9 +91,9 @@
status = acpi_tb_get_table_body(address, &header, table_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not get ACPI table (size %X), %s\n",
- header.length,
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not get ACPI table (size %X)",
+ header.length));
return_ACPI_STATUS(status);
}
@@ -148,7 +148,6 @@
sizeof(struct acpi_table_header),
(void *)&header);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not map memory at %8.8X%8.8X for length %X\n", ACPI_FORMAT_UINT64(address->pointer.physical), sizeof(struct acpi_table_header)));
return_ACPI_STATUS(status);
}
@@ -161,8 +160,8 @@
default:
- ACPI_REPORT_ERROR(("Invalid address flags %X\n",
- address->pointer_type));
+ ACPI_ERROR((AE_INFO, "Invalid address flags %X",
+ address->pointer_type));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
@@ -253,8 +252,8 @@
if (ACPI_FAILURE(status)) {
/* Some severe error from the OSL, but we basically ignore it */
- ACPI_REPORT_ERROR(("Could not override ACPI table, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not override ACPI table"));
return_ACPI_STATUS(status);
}
@@ -273,15 +272,14 @@
status = acpi_tb_get_this_table(&address, new_table, table_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not copy override ACPI table, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "Could not copy ACPI table"));
return_ACPI_STATUS(status);
}
/* Copy the table info */
- ACPI_REPORT_INFO(("Table [%4.4s] replaced by host OS\n",
- table_info->pointer->signature));
+ ACPI_INFO((AE_INFO, "Table [%4.4s] replaced by host OS",
+ table_info->pointer->signature));
return_ACPI_STATUS(AE_OK);
}
@@ -327,7 +325,9 @@
full_table = ACPI_MEM_ALLOCATE(header->length);
if (!full_table) {
- ACPI_REPORT_ERROR(("Could not allocate table memory for [%4.4s] length %X\n", header->signature, header->length));
+ ACPI_ERROR((AE_INFO,
+ "Could not allocate table memory for [%4.4s] length %X",
+ header->signature, header->length));
return_ACPI_STATUS(AE_NO_MEMORY);
}
@@ -351,7 +351,12 @@
(acpi_size) header->length,
(void *)&full_table);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not map memory for table [%4.4s] at %8.8X%8.8X for length %X\n", header->signature, ACPI_FORMAT_UINT64(address->pointer.physical), header->length));
+ ACPI_ERROR((AE_INFO,
+ "Could not map memory for table [%4.4s] at %8.8X%8.8X for length %X",
+ header->signature,
+ ACPI_FORMAT_UINT64(address->pointer.
+ physical),
+ header->length));
return (status);
}
@@ -362,8 +367,8 @@
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid address flags %X\n",
- address->pointer_type));
+ ACPI_ERROR((AE_INFO, "Invalid address flags %X",
+ address->pointer_type));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
diff --git a/drivers/acpi/tables/tbgetall.c b/drivers/acpi/tables/tbgetall.c
index 8d72343..134e5dc 100644
--- a/drivers/acpi/tables/tbgetall.c
+++ b/drivers/acpi/tables/tbgetall.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -152,7 +152,9 @@
/* Signature must match request */
if (ACPI_STRNCMP(header.signature, signature, ACPI_NAME_SIZE)) {
- ACPI_REPORT_ERROR(("Incorrect table signature - wanted [%s] found [%4.4s]\n", signature, header.signature));
+ ACPI_ERROR((AE_INFO,
+ "Incorrect table signature - wanted [%s] found [%4.4s]",
+ signature, header.signature));
return_ACPI_STATUS(AE_BAD_SIGNATURE);
}
@@ -231,14 +233,18 @@
*/
status = acpi_tb_get_primary_table(&address, &table_info);
if ((status != AE_OK) && (status != AE_TABLE_NOT_SUPPORTED)) {
- ACPI_REPORT_WARNING(("%s, while getting table at %8.8X%8.8X\n", acpi_format_exception(status), ACPI_FORMAT_UINT64(address.pointer.value)));
+ ACPI_WARNING((AE_INFO,
+ "%s, while getting table at %8.8X%8.8X",
+ acpi_format_exception(status),
+ ACPI_FORMAT_UINT64(address.pointer.
+ value)));
}
}
/* We must have a FADT to continue */
if (!acpi_gbl_FADT) {
- ACPI_REPORT_ERROR(("No FADT present in RSDT/XSDT\n"));
+ ACPI_ERROR((AE_INFO, "No FADT present in RSDT/XSDT"));
return_ACPI_STATUS(AE_NO_ACPI_TABLES);
}
@@ -248,7 +254,8 @@
*/
status = acpi_tb_convert_table_fadt();
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not convert FADT to internal common format\n"));
+ ACPI_ERROR((AE_INFO,
+ "Could not convert FADT to internal common format"));
return_ACPI_STATUS(status);
}
@@ -258,8 +265,8 @@
status = acpi_tb_get_secondary_table(&address, FACS_SIG, &table_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not get/install the FACS, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not get/install the FACS"));
return_ACPI_STATUS(status);
}
@@ -278,7 +285,7 @@
status = acpi_tb_get_secondary_table(&address, DSDT_SIG, &table_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not get/install the DSDT\n"));
+ ACPI_ERROR((AE_INFO, "Could not get/install the DSDT"));
return_ACPI_STATUS(status);
}
@@ -292,7 +299,9 @@
"Hex dump of entire DSDT, size %d (0x%X), Integer width = %d\n",
acpi_gbl_DSDT->length, acpi_gbl_DSDT->length,
acpi_gbl_integer_bit_width));
- ACPI_DUMP_BUFFER((u8 *) acpi_gbl_DSDT, acpi_gbl_DSDT->length);
+
+ ACPI_DUMP_BUFFER(ACPI_CAST_PTR(u8, acpi_gbl_DSDT),
+ acpi_gbl_DSDT->length);
/* Always delete the RSDP mapping, we are done with it */
diff --git a/drivers/acpi/tables/tbinstal.c b/drivers/acpi/tables/tbinstal.c
index 10db848..7ffd0fd 100644
--- a/drivers/acpi/tables/tbinstal.c
+++ b/drivers/acpi/tables/tbinstal.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -128,8 +128,8 @@
status = acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not acquire table mutex, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not acquire table mutex"));
return_ACPI_STATUS(status);
}
@@ -146,9 +146,9 @@
status = acpi_tb_init_table_descriptor(table_info->type, table_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Could not install table [%4.4s], %s\n",
- table_info->pointer->signature,
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not install table [%4.4s]",
+ table_info->pointer->signature));
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s located at %p\n",
diff --git a/drivers/acpi/tables/tbrsdt.c b/drivers/acpi/tables/tbrsdt.c
index ad0252c..4d30822 100644
--- a/drivers/acpi/tables/tbrsdt.c
+++ b/drivers/acpi/tables/tbrsdt.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -176,7 +176,7 @@
{
int no_match;
- ACPI_FUNCTION_NAME("tb_validate_rsdt");
+ ACPI_FUNCTION_ENTRY();
/*
* Search for appropriate signature, RSDT or XSDT
@@ -192,24 +192,24 @@
if (no_match) {
/* Invalid RSDT or XSDT signature */
- ACPI_REPORT_ERROR(("Invalid signature where RSDP indicates RSDT/XSDT should be located\n"));
+ ACPI_ERROR((AE_INFO,
+ "Invalid signature where RSDP indicates RSDT/XSDT should be located. RSDP:"));
ACPI_DUMP_BUFFER(acpi_gbl_RSDP, 20);
- ACPI_DEBUG_PRINT_RAW((ACPI_DB_ERROR,
- "RSDT/XSDT signature at %X (%p) is invalid\n",
- acpi_gbl_RSDP->rsdt_physical_address,
- (void *)(acpi_native_uint) acpi_gbl_RSDP->
- rsdt_physical_address));
+ ACPI_ERROR((AE_INFO,
+ "RSDT/XSDT signature at %X (%p) is invalid",
+ acpi_gbl_RSDP->rsdt_physical_address,
+ (void *)(acpi_native_uint) acpi_gbl_RSDP->
+ rsdt_physical_address));
if (acpi_gbl_root_table_type == ACPI_TABLE_TYPE_RSDT) {
- ACPI_REPORT_ERROR(("Looking for RSDT\n"))
+ ACPI_ERROR((AE_INFO, "Looking for RSDT"));
} else {
- ACPI_REPORT_ERROR(("Looking for XSDT\n"))
+ ACPI_ERROR((AE_INFO, "Looking for XSDT"));
}
ACPI_DUMP_BUFFER((char *)table_ptr, 48);
-
return (AE_BAD_SIGNATURE);
}
@@ -243,15 +243,13 @@
table_info.type = ACPI_TABLE_XSDT;
status = acpi_tb_get_table(&address, &table_info);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not get the RSDT/XSDT, %s\n",
- acpi_format_exception(status)));
-
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not get the RSDT/XSDT"));
return_ACPI_STATUS(status);
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "RSDP located at %p, points to RSDT physical=%8.8X%8.8X \n",
+ "RSDP located at %p, points to RSDT physical=%8.8X%8.8X\n",
acpi_gbl_RSDP,
ACPI_FORMAT_UINT64(address.pointer.value)));
diff --git a/drivers/acpi/tables/tbutils.c b/drivers/acpi/tables/tbutils.c
index 4b2fbb5..bc57159 100644
--- a/drivers/acpi/tables/tbutils.c
+++ b/drivers/acpi/tables/tbutils.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -94,9 +94,8 @@
new_table_desc->pointer->length)
&&
(!ACPI_MEMCMP
- ((const char *)table_desc->pointer,
- (const char *)new_table_desc->pointer,
- (acpi_size) new_table_desc->pointer->length))) {
+ (table_desc->pointer, new_table_desc->pointer,
+ new_table_desc->pointer->length))) {
/* Match: this table is already installed */
ACPI_DEBUG_PRINT((ACPI_DB_TABLES,
@@ -145,14 +144,13 @@
{
acpi_name signature;
- ACPI_FUNCTION_NAME("tb_validate_table_header");
+ ACPI_FUNCTION_ENTRY();
/* Verify that this is a valid address */
if (!acpi_os_readable(table_header, sizeof(struct acpi_table_header))) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Cannot read table header at %p\n",
- table_header));
+ ACPI_ERROR((AE_INFO,
+ "Cannot read table header at %p", table_header));
return (AE_BAD_ADDRESS);
}
@@ -161,12 +159,12 @@
ACPI_MOVE_32_TO_32(&signature, table_header->signature);
if (!acpi_ut_valid_acpi_name(signature)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Table signature at %p [%p] has invalid characters\n",
- table_header, &signature));
+ ACPI_ERROR((AE_INFO,
+ "Table signature at %p [%p] has invalid characters",
+ table_header, &signature));
- ACPI_REPORT_WARNING(("Invalid table signature found: [%4.4s]\n",
- (char *)&signature));
+ ACPI_WARNING((AE_INFO, "Invalid table signature found: [%4.4s]",
+ ACPI_CAST_PTR(char, &signature)));
ACPI_DUMP_BUFFER(table_header,
sizeof(struct acpi_table_header));
@@ -176,11 +174,13 @@
/* Validate the table length */
if (table_header->length < sizeof(struct acpi_table_header)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid length in table header %p name %4.4s\n",
- table_header, (char *)&signature));
+ ACPI_ERROR((AE_INFO,
+ "Invalid length in table header %p name %4.4s",
+ table_header, (char *)&signature));
- ACPI_REPORT_WARNING(("Invalid table header length (0x%X) found\n", (u32) table_header->length));
+ ACPI_WARNING((AE_INFO,
+ "Invalid table header length (0x%X) found",
+ (u32) table_header->length));
ACPI_DUMP_BUFFER(table_header,
sizeof(struct acpi_table_header));
@@ -219,7 +219,10 @@
/* Return the appropriate exception */
if (checksum) {
- ACPI_REPORT_WARNING(("Invalid checksum in table [%4.4s] (%02X, sum %02X is not zero)\n", table_header->signature, (u32) table_header->checksum, (u32) checksum));
+ ACPI_WARNING((AE_INFO,
+ "Invalid checksum in table [%4.4s] (%02X, sum %02X is not zero)",
+ table_header->signature,
+ (u32) table_header->checksum, (u32) checksum));
status = AE_BAD_CHECKSUM;
}
@@ -241,16 +244,16 @@
u8 acpi_tb_generate_checksum(void *buffer, u32 length)
{
- const u8 *limit;
- const u8 *rover;
+ u8 *end_buffer;
+ u8 *rover;
u8 sum = 0;
if (buffer && length) {
/* Buffer and Length are valid */
- limit = (u8 *) buffer + length;
+ end_buffer = ACPI_ADD_PTR(u8, buffer, length);
- for (rover = buffer; rover < limit; rover++) {
+ for (rover = buffer; rover < end_buffer; rover++) {
sum = (u8) (sum + *rover);
}
}
@@ -292,8 +295,7 @@
}
}
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "table_id=%X does not exist\n",
- table_id));
+ ACPI_ERROR((AE_INFO, "table_id=%X does not exist", table_id));
return (AE_BAD_PARAMETER);
}
#endif
diff --git a/drivers/acpi/tables/tbxface.c b/drivers/acpi/tables/tbxface.c
index 3f96a49..9fe53c9 100644
--- a/drivers/acpi/tables/tbxface.c
+++ b/drivers/acpi/tables/tbxface.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -75,8 +75,7 @@
status = acpi_os_get_root_pointer(ACPI_LOGICAL_ADDRESSING,
&rsdp_address);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_load_tables: Could not get RSDP, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "Could not get the RSDP"));
goto error_exit;
}
@@ -86,7 +85,7 @@
status = acpi_tb_verify_rsdp(&rsdp_address);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_load_tables: RSDP Failed validation: %s\n", acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "During RSDP validation"));
goto error_exit;
}
@@ -94,7 +93,7 @@
status = acpi_tb_get_table_rsdt();
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_load_tables: Could not load RSDT: %s\n", acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "Could not load RSDT"));
goto error_exit;
}
@@ -102,7 +101,8 @@
status = acpi_tb_get_required_tables();
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_load_tables: Error getting required tables (DSDT/FADT/FACS): %s\n", acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not get all required tables (DSDT/FADT/FACS)"));
goto error_exit;
}
@@ -112,16 +112,14 @@
status = acpi_ns_load_namespace();
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_load_tables: Could not load namespace: %s\n", acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "Could not load namespace"));
goto error_exit;
}
return_ACPI_STATUS(AE_OK);
error_exit:
- ACPI_REPORT_ERROR(("acpi_load_tables: Could not load tables: %s\n",
- acpi_format_exception(status)));
-
+ ACPI_EXCEPTION((AE_INFO, status, "Could not load tables"));
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/tables/tbxfroot.c b/drivers/acpi/tables/tbxfroot.c
index 3b8a7e0..a62db6a 100644
--- a/drivers/acpi/tables/tbxfroot.c
+++ b/drivers/acpi/tables/tbxfroot.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -251,7 +251,7 @@
acpi_tb_get_rsdt_address(&address);
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "RSDP located at %p, RSDT physical=%8.8X%8.8X \n",
+ "RSDP located at %p, RSDT physical=%8.8X%8.8X\n",
acpi_gbl_RSDP,
ACPI_FORMAT_UINT64(address.pointer.value)));
@@ -396,9 +396,8 @@
status = acpi_tb_find_rsdp(&table_info, flags);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "RSDP structure not found, %s Flags=%X\n",
- acpi_format_exception(status), flags));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "RSDP structure not found - Flags=%X", flags));
return_ACPI_STATUS(AE_NO_ACPI_TABLES);
}
@@ -503,10 +502,10 @@
ACPI_EBDA_PTR_LENGTH,
(void *)&table_ptr);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not map memory at %8.8X for length %X\n",
- ACPI_EBDA_PTR_LOCATION,
- ACPI_EBDA_PTR_LENGTH));
+ ACPI_ERROR((AE_INFO,
+ "Could not map memory at %8.8X for length %X",
+ ACPI_EBDA_PTR_LOCATION,
+ ACPI_EBDA_PTR_LENGTH));
return_ACPI_STATUS(status);
}
@@ -530,10 +529,10 @@
ACPI_EBDA_WINDOW_SIZE,
(void *)&table_ptr);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not map memory at %8.8X for length %X\n",
- physical_address,
- ACPI_EBDA_WINDOW_SIZE));
+ ACPI_ERROR((AE_INFO,
+ "Could not map memory at %8.8X for length %X",
+ physical_address,
+ ACPI_EBDA_WINDOW_SIZE));
return_ACPI_STATUS(status);
}
@@ -563,10 +562,10 @@
(void *)&table_ptr);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Could not map memory at %8.8X for length %X\n",
- ACPI_HI_RSDP_WINDOW_BASE,
- ACPI_HI_RSDP_WINDOW_SIZE));
+ ACPI_ERROR((AE_INFO,
+ "Could not map memory at %8.8X for length %X",
+ ACPI_HI_RSDP_WINDOW_BASE,
+ ACPI_HI_RSDP_WINDOW_SIZE));
return_ACPI_STATUS(status);
}
@@ -635,7 +634,7 @@
/* A valid RSDP was not found */
- ACPI_REPORT_ERROR(("No valid RSDP was found\n"));
+ ACPI_ERROR((AE_INFO, "No valid RSDP was found"));
return_ACPI_STATUS(AE_NOT_FOUND);
}
diff --git a/drivers/acpi/utilities/Makefile b/drivers/acpi/utilities/Makefile
index e87108b..88eff14 100644
--- a/drivers/acpi/utilities/Makefile
+++ b/drivers/acpi/utilities/Makefile
@@ -2,7 +2,8 @@
# Makefile for all Linux ACPI interpreter subdirectories
#
-obj-y := utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
- utcopy.o utdelete.o utglobal.o utmath.o utobject.o utstate.o utmutex.o utobject.o utcache.o
+obj-y := utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
+ utcopy.o utdelete.o utglobal.o utmath.o utobject.o \
+ utstate.o utmutex.o utobject.o utcache.o utresrc.o
EXTRA_CFLAGS += $(ACPI_CFLAGS)
diff --git a/drivers/acpi/utilities/utalloc.c b/drivers/acpi/utilities/utalloc.c
index 068450b..03b0044 100644
--- a/drivers/acpi/utilities/utalloc.c
+++ b/drivers/acpi/utilities/utalloc.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -47,7 +47,7 @@
ACPI_MODULE_NAME("utalloc")
/* Local prototypes */
-#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
static struct acpi_debug_mem_block *acpi_ut_find_allocation(void *allocation);
static acpi_status
@@ -58,9 +58,7 @@
static acpi_status
acpi_ut_remove_allocation(struct acpi_debug_mem_block *address,
u32 component, char *module, u32 line);
-#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
-#ifdef ACPI_DBG_TRACK_ALLOCATIONS
static acpi_status
acpi_ut_create_list(char *list_name,
u16 object_size, struct acpi_memory_list **return_cache);
@@ -303,8 +301,8 @@
/* Check for an inadvertent size of zero bytes */
if (!size) {
- _ACPI_REPORT_ERROR(module, line, component,
- ("ut_allocate: Attempt to allocate zero bytes\n"));
+ ACPI_ERROR((module, line,
+ "ut_allocate: Attempt to allocate zero bytes, allocating 1 byte"));
size = 1;
}
@@ -312,9 +310,9 @@
if (!allocation) {
/* Report allocation error */
- _ACPI_REPORT_ERROR(module, line, component,
- ("ut_allocate: Could not allocate size %X\n",
- (u32) size));
+ ACPI_ERROR((module, line,
+ "ut_allocate: Could not allocate size %X",
+ (u32) size));
return_PTR(NULL);
}
@@ -346,18 +344,17 @@
/* Check for an inadvertent size of zero bytes */
if (!size) {
- _ACPI_REPORT_ERROR(module, line, component,
- ("ut_callocate: Attempt to allocate zero bytes\n"));
- return_PTR(NULL);
+ ACPI_ERROR((module, line,
+ "Attempt to allocate zero bytes, allocating 1 byte"));
+ size = 1;
}
allocation = acpi_os_allocate(size);
if (!allocation) {
/* Report allocation error */
- _ACPI_REPORT_ERROR(module, line, component,
- ("ut_callocate: Could not allocate size %X\n",
- (u32) size));
+ ACPI_ERROR((module, line,
+ "Could not allocate size %X", (u32) size));
return_PTR(NULL);
}
@@ -482,9 +479,8 @@
if (!allocation) {
/* Report allocation error */
- _ACPI_REPORT_ERROR(module, line, component,
- ("ut_callocate: Could not allocate size %X\n",
- (u32) size));
+ ACPI_ERROR((module, line,
+ "Could not allocate size %X", (u32) size));
return (NULL);
}
@@ -526,8 +522,7 @@
ACPI_FUNCTION_TRACE_PTR("ut_free", allocation);
if (NULL == allocation) {
- _ACPI_REPORT_ERROR(module, line, component,
- ("acpi_ut_free: Attempt to delete a NULL address\n"));
+ ACPI_ERROR((module, line, "Attempt to delete a NULL address"));
return_VOID;
}
@@ -542,14 +537,11 @@
status = acpi_ut_remove_allocation(debug_block,
component, module, line);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Could not free memory, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "Could not free memory"));
}
acpi_os_free(debug_block);
-
ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "%p freed\n", allocation));
-
return_VOID;
}
@@ -626,10 +618,12 @@
*/
element = acpi_ut_find_allocation(allocation);
if (element) {
- ACPI_REPORT_ERROR(("ut_track_allocation: Allocation already present in list! (%p)\n", allocation));
+ ACPI_ERROR((AE_INFO,
+ "ut_track_allocation: Allocation already present in list! (%p)",
+ allocation));
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Element %p Address %p\n",
- element, allocation));
+ ACPI_ERROR((AE_INFO, "Element %p Address %p",
+ element, allocation));
goto unlock_and_exit;
}
@@ -689,8 +683,8 @@
if (NULL == mem_list->list_head) {
/* No allocations! */
- _ACPI_REPORT_ERROR(module, line, component,
- ("ut_remove_allocation: Empty allocation list, nothing to free!\n"));
+ ACPI_ERROR((module, line,
+ "Empty allocation list, nothing to free!"));
return_ACPI_STATUS(AE_OK);
}
@@ -865,12 +859,11 @@
/* Print summary */
if (!num_outstanding) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "No outstanding allocations.\n"));
+ ACPI_INFO((AE_INFO, "No outstanding allocations"));
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "%d(%X) Outstanding allocations\n",
- num_outstanding, num_outstanding));
+ ACPI_ERROR((AE_INFO,
+ "%d(%X) Outstanding allocations",
+ num_outstanding, num_outstanding));
}
return_VOID;
diff --git a/drivers/acpi/utilities/utcache.c b/drivers/acpi/utilities/utcache.c
index 93d4868..2177cb1 100644
--- a/drivers/acpi/utilities/utcache.c
+++ b/drivers/acpi/utilities/utcache.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/utilities/utcopy.c b/drivers/acpi/utilities/utcopy.c
index 5442b32..df2d320 100644
--- a/drivers/acpi/utilities/utcopy.c
+++ b/drivers/acpi/utilities/utcopy.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -398,14 +398,17 @@
* Build a simple object (no nested objects)
*/
status = acpi_ut_copy_isimple_to_esimple(internal_object,
- (union acpi_object *)
- ret_buffer->pointer,
- ((u8 *) ret_buffer->
- pointer +
- ACPI_ROUND_UP_TO_NATIVE_WORD
- (sizeof
- (union
- acpi_object))),
+ ACPI_CAST_PTR(union
+ acpi_object,
+ ret_buffer->
+ pointer),
+ ACPI_ADD_PTR(u8,
+ ret_buffer->
+ pointer,
+ ACPI_ROUND_UP_TO_NATIVE_WORD
+ (sizeof
+ (union
+ acpi_object))),
&ret_buffer->length);
/*
* build simple does not include the object size in the length
@@ -603,8 +606,8 @@
/*
* Packages as external input to control methods are not supported,
*/
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Packages as parameters not implemented!\n"));
+ ACPI_ERROR((AE_INFO,
+ "Packages as parameters not implemented!"));
return_ACPI_STATUS(AE_NOT_IMPLEMENTED);
}
@@ -867,7 +870,7 @@
count +
1) * sizeof(void *));
if (!dest_obj->package.elements) {
- ACPI_REPORT_ERROR(("aml_build_copy_internal_package_object: Package allocation failure\n"));
+ ACPI_ERROR((AE_INFO, "Package allocation failure"));
return_ACPI_STATUS(AE_NO_MEMORY);
}
diff --git a/drivers/acpi/utilities/utdebug.c b/drivers/acpi/utilities/utdebug.c
index d80e926..35f3d58 100644
--- a/drivers/acpi/utilities/utdebug.c
+++ b/drivers/acpi/utilities/utdebug.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/utilities/utdelete.c b/drivers/acpi/utilities/utdelete.c
index 2bc878f..1db9695 100644
--- a/drivers/acpi/utilities/utdelete.c
+++ b/drivers/acpi/utilities/utdelete.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -363,8 +363,7 @@
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown action (%X)\n",
- action));
+ ACPI_ERROR((AE_INFO, "Unknown action (%X)", action));
break;
}
@@ -374,9 +373,9 @@
*/
if (count > ACPI_MAX_REFERENCE_COUNT) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "**** Warning **** Large Reference Count (%X) in object %p\n\n",
- count, object));
+ ACPI_WARNING((AE_INFO,
+ "Large Reference Count (%X) in object %p",
+ count, object));
}
return;
@@ -535,8 +534,8 @@
error_exit:
- ACPI_REPORT_ERROR(("Could not update object reference count, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not update object reference count"));
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/utilities/uteval.c b/drivers/acpi/utilities/uteval.c
index 7b81d5e..106cc97 100644
--- a/drivers/acpi/utilities/uteval.c
+++ b/drivers/acpi/utilities/uteval.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -95,7 +95,9 @@
for (i = 0; i < ACPI_NUM_OSI_STRINGS; i++) {
if (!ACPI_STRCMP(string_desc->string.pointer,
- (char *)acpi_gbl_valid_osi_strings[i])) {
+ ACPI_CAST_PTR(char,
+ acpi_gbl_valid_osi_strings[i])))
+ {
/* This string is supported */
return_desc->integer.value = 0xFFFFFFFF;
@@ -152,8 +154,8 @@
acpi_ut_get_node_name(prefix_node),
path));
} else {
- ACPI_REPORT_METHOD_ERROR("Method execution failed",
- prefix_node, path, status);
+ ACPI_ERROR_METHOD("Method execution failed",
+ prefix_node, path, status);
}
return_ACPI_STATUS(status);
@@ -163,9 +165,8 @@
if (!info.return_object) {
if (expected_return_btypes) {
- ACPI_REPORT_METHOD_ERROR("No object was returned from",
- prefix_node, path,
- AE_NOT_EXIST);
+ ACPI_ERROR_METHOD("No object was returned from",
+ prefix_node, path, AE_NOT_EXIST);
return_ACPI_STATUS(AE_NOT_EXIST);
}
@@ -210,15 +211,14 @@
/* Is the return object one of the expected types? */
if (!(expected_return_btypes & return_btype)) {
- ACPI_REPORT_METHOD_ERROR("Return object type is incorrect",
- prefix_node, path, AE_TYPE);
+ ACPI_ERROR_METHOD("Return object type is incorrect",
+ prefix_node, path, AE_TYPE);
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Type returned from %s was incorrect: %s, expected Btypes: %X\n",
- path,
- acpi_ut_get_object_type_name(info.
- return_object),
- expected_return_btypes));
+ ACPI_ERROR((AE_INFO,
+ "Type returned from %s was incorrect: %s, expected Btypes: %X",
+ path,
+ acpi_ut_get_object_type_name(info.return_object),
+ expected_return_btypes));
/* On error exit, we must delete the return object */
@@ -592,7 +592,7 @@
"_STA on %4.4s was not found, assuming device is present\n",
acpi_ut_get_node_name(device_node)));
- *flags = 0x0F;
+ *flags = ACPI_UINT32_MAX;
status = AE_OK;
}
@@ -637,17 +637,17 @@
for (i = 0; i < 4; i++) {
highest[i] = 0xFF;
status = acpi_ut_evaluate_object(device_node,
- (char *)
- acpi_gbl_highest_dstate_names
- [i], ACPI_BTYPE_INTEGER,
- &obj_desc);
+ ACPI_CAST_PTR(char,
+ acpi_gbl_highest_dstate_names
+ [i]),
+ ACPI_BTYPE_INTEGER, &obj_desc);
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"%s on Device %4.4s, %s\n",
- (char *)
- acpi_gbl_highest_dstate_names
- [i],
+ ACPI_CAST_PTR(char,
+ acpi_gbl_highest_dstate_names
+ [i]),
acpi_ut_get_node_name
(device_node),
acpi_format_exception
diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c
index 399e64b..ffd1338 100644
--- a/drivers/acpi/utilities/utglobal.c
+++ b/drivers/acpi/utilities/utglobal.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -67,8 +67,11 @@
acpi_status sub_status;
const char *exception = NULL;
- ACPI_FUNCTION_NAME("format_exception");
+ ACPI_FUNCTION_ENTRY();
+ /*
+ * Status is composed of two parts, a "type" and an actual code
+ */
sub_status = (status & ~AE_CODE_MASK);
switch (status & AE_CODE_MASK) {
@@ -118,13 +121,13 @@
if (!exception) {
/* Exception code was not recognized */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unknown exception code: 0x%8.8X\n", status));
+ ACPI_ERROR((AE_INFO,
+ "Unknown exception code: 0x%8.8X", status));
- return ((const char *)"UNKNOWN_STATUS_CODE");
+ exception = "UNKNOWN_STATUS_CODE";
}
- return ((const char *)exception);
+ return (ACPI_CAST_PTR(const char, exception));
}
/*******************************************************************************
@@ -217,23 +220,23 @@
* 2) _TZ_ is defined to be a thermal zone in order to allow ASL code to
* perform a Notify() operation on it.
*/
-const struct acpi_predefined_names acpi_gbl_pre_defined_names[] =
- { {"_GPE", ACPI_TYPE_LOCAL_SCOPE, NULL},
-{"_PR_", ACPI_TYPE_LOCAL_SCOPE, NULL},
-{"_SB_", ACPI_TYPE_DEVICE, NULL},
-{"_SI_", ACPI_TYPE_LOCAL_SCOPE, NULL},
-{"_TZ_", ACPI_TYPE_THERMAL, NULL},
-{"_REV", ACPI_TYPE_INTEGER, (char *)ACPI_CA_SUPPORT_LEVEL},
-{"_OS_", ACPI_TYPE_STRING, ACPI_OS_NAME},
-{"_GL_", ACPI_TYPE_MUTEX, (char *)1},
+const struct acpi_predefined_names acpi_gbl_pre_defined_names[] = {
+ {"_GPE", ACPI_TYPE_LOCAL_SCOPE, NULL},
+ {"_PR_", ACPI_TYPE_LOCAL_SCOPE, NULL},
+ {"_SB_", ACPI_TYPE_DEVICE, NULL},
+ {"_SI_", ACPI_TYPE_LOCAL_SCOPE, NULL},
+ {"_TZ_", ACPI_TYPE_THERMAL, NULL},
+ {"_REV", ACPI_TYPE_INTEGER, (char *)ACPI_CA_SUPPORT_LEVEL},
+ {"_OS_", ACPI_TYPE_STRING, ACPI_OS_NAME},
+ {"_GL_", ACPI_TYPE_MUTEX, (char *)1},
#if !defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY)
-{"_OSI", ACPI_TYPE_METHOD, (char *)1},
+ {"_OSI", ACPI_TYPE_METHOD, (char *)1},
#endif
/* Table terminator */
-{NULL, ACPI_TYPE_ANY, NULL}
+ {NULL, ACPI_TYPE_ANY, NULL}
};
/*
@@ -485,7 +488,7 @@
return ("invalid_space_id");
}
- return ((char *)acpi_gbl_region_types[space_id]);
+ return (ACPI_CAST_PTR(char, acpi_gbl_region_types[space_id]));
}
/*******************************************************************************
@@ -503,11 +506,13 @@
/* Event type decoding */
static const char *acpi_gbl_event_types[ACPI_NUM_FIXED_EVENTS] = {
+/*! [Begin] no source code translation (keep these strings as-is) */
"PM_Timer",
- "global_lock",
- "power_button",
- "sleep_button",
- "real_time_clock",
+ "GlobalLock",
+ "PowerButton",
+ "SleepButton",
+ "RealTimeClock",
+/*! [End] no source code translation !*/
};
char *acpi_ut_get_event_name(u32 event_id)
@@ -517,7 +522,7 @@
return ("invalid_event_iD");
}
- return ((char *)acpi_gbl_event_types[event_id]);
+ return (ACPI_CAST_PTR(char, acpi_gbl_event_types[event_id]));
}
/*******************************************************************************
@@ -545,12 +550,13 @@
/* Printable names of the ACPI object types */
static const char *acpi_gbl_ns_type_names[] = {
+/*! [Begin] no source code translation (keep these strings as-is) */
/* 00 */ "Untyped",
/* 01 */ "Integer",
/* 02 */ "String",
/* 03 */ "Buffer",
/* 04 */ "Package",
- /* 05 */ "field_unit",
+ /* 05 */ "FieldUnit",
/* 06 */ "Device",
/* 07 */ "Event",
/* 08 */ "Method",
@@ -559,33 +565,34 @@
/* 11 */ "Power",
/* 12 */ "Processor",
/* 13 */ "Thermal",
- /* 14 */ "buffer_field",
- /* 15 */ "ddb_handle",
- /* 16 */ "debug_object",
- /* 17 */ "region_field",
- /* 18 */ "bank_field",
- /* 19 */ "index_field",
+ /* 14 */ "BufferField",
+ /* 15 */ "DdbHandle",
+ /* 16 */ "DebugObject",
+ /* 17 */ "RegionField",
+ /* 18 */ "BankField",
+ /* 19 */ "IndexField",
/* 20 */ "Reference",
/* 21 */ "Alias",
- /* 22 */ "method_alias",
+ /* 22 */ "MethodAlias",
/* 23 */ "Notify",
- /* 24 */ "addr_handler",
- /* 25 */ "resource_desc",
- /* 26 */ "resource_fld",
+ /* 24 */ "AddrHandler",
+ /* 25 */ "ResourceDesc",
+ /* 26 */ "ResourceFld",
/* 27 */ "Scope",
/* 28 */ "Extra",
/* 29 */ "Data",
/* 30 */ "Invalid"
+/*! [End] no source code translation !*/
};
char *acpi_ut_get_type_name(acpi_object_type type)
{
if (type > ACPI_TYPE_INVALID) {
- return ((char *)acpi_gbl_bad_type);
+ return (ACPI_CAST_PTR(char, acpi_gbl_bad_type));
}
- return ((char *)acpi_gbl_ns_type_names[type]);
+ return (ACPI_CAST_PTR(char, acpi_gbl_ns_type_names[type]));
}
char *acpi_ut_get_object_type_name(union acpi_operand_object *obj_desc)
@@ -634,7 +641,7 @@
/* Name must be a valid ACPI name */
- if (!acpi_ut_valid_acpi_name(*(u32 *) node->name.ascii)) {
+ if (!acpi_ut_valid_acpi_name(node->name.integer)) {
return ("????");
}
@@ -658,15 +665,16 @@
/* Printable names of object descriptor types */
static const char *acpi_gbl_desc_type_names[] = {
+/*! [Begin] no source code translation (keep these ASL Keywords as-is) */
/* 00 */ "Invalid",
/* 01 */ "Cached",
/* 02 */ "State-Generic",
/* 03 */ "State-Update",
/* 04 */ "State-Package",
/* 05 */ "State-Control",
- /* 06 */ "State-root_parse_scope",
- /* 07 */ "State-parse_scope",
- /* 08 */ "State-walk_scope",
+ /* 06 */ "State-RootParseScope",
+ /* 07 */ "State-ParseScope",
+ /* 08 */ "State-WalkScope",
/* 09 */ "State-Result",
/* 10 */ "State-Notify",
/* 11 */ "State-Thread",
@@ -674,6 +682,7 @@
/* 13 */ "Parser",
/* 14 */ "Operand",
/* 15 */ "Node"
+/*! [End] no source code translation !*/
};
char *acpi_ut_get_descriptor_name(void *object)
@@ -684,11 +693,12 @@
}
if (ACPI_GET_DESCRIPTOR_TYPE(object) > ACPI_DESC_TYPE_MAX) {
- return ((char *)acpi_gbl_bad_type);
+ return (ACPI_CAST_PTR(char, acpi_gbl_bad_type));
}
- return ((char *)
- acpi_gbl_desc_type_names[ACPI_GET_DESCRIPTOR_TYPE(object)]);
+ return (ACPI_CAST_PTR(char,
+ acpi_gbl_desc_type_names[ACPI_GET_DESCRIPTOR_TYPE
+ (object)]));
}
@@ -787,6 +797,11 @@
acpi_gbl_mutex_info[i].use_count = 0;
}
+ for (i = 0; i < ACPI_NUM_OWNERID_MASKS; i++) {
+ acpi_gbl_owner_id_mask[i] = 0;
+ }
+ acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS - 1] = 0x80000000; /* Last ID is never valid */
+
/* GPE support */
acpi_gbl_gpe_xrupt_list_head = NULL;
@@ -824,7 +839,11 @@
acpi_gbl_ns_lookup_count = 0;
acpi_gbl_ps_find_count = 0;
acpi_gbl_acpi_hardware_present = TRUE;
- acpi_gbl_owner_id_mask = 0;
+ acpi_gbl_last_owner_id_index = 0;
+ acpi_gbl_next_owner_id_offset = 0;
+ acpi_gbl_trace_method_name = 0;
+ acpi_gbl_trace_dbg_level = 0;
+ acpi_gbl_trace_dbg_layer = 0;
acpi_gbl_debugger_configuration = DEBUGGER_THREADING;
acpi_gbl_db_output_flags = ACPI_DB_CONSOLE_OUTPUT;
@@ -836,7 +855,6 @@
/* Namespace */
acpi_gbl_root_node = NULL;
-
acpi_gbl_root_node_struct.name.integer = ACPI_ROOT_NAME;
acpi_gbl_root_node_struct.descriptor = ACPI_DESC_TYPE_NAMED;
acpi_gbl_root_node_struct.type = ACPI_TYPE_DEVICE;
diff --git a/drivers/acpi/utilities/utinit.c b/drivers/acpi/utilities/utinit.c
index 9dde82b..ba771b4 100644
--- a/drivers/acpi/utilities/utinit.c
+++ b/drivers/acpi/utilities/utinit.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -72,9 +72,9 @@
acpi_ut_fadt_register_error(char *register_name, u32 value, acpi_size offset)
{
- ACPI_REPORT_WARNING(("Invalid FADT value %s=%X at offset %X FADT=%p\n",
- register_name, value, (u32) offset,
- acpi_gbl_FADT));
+ ACPI_WARNING((AE_INFO,
+ "Invalid FADT value %s=%X at offset %X FADT=%p",
+ register_name, value, (u32) offset, acpi_gbl_FADT));
}
/******************************************************************************
@@ -221,15 +221,14 @@
/* Just exit if subsystem is already shutdown */
if (acpi_gbl_shutdown) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "ACPI Subsystem is already terminated\n"));
+ ACPI_ERROR((AE_INFO, "ACPI Subsystem is already terminated"));
return_VOID;
}
/* Subsystem appears active, go ahead and shut it down */
acpi_gbl_shutdown = TRUE;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Shutting down ACPI Subsystem...\n"));
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Shutting down ACPI Subsystem\n"));
/* Close the acpi_event Handling */
diff --git a/drivers/acpi/utilities/utmath.c b/drivers/acpi/utilities/utmath.c
index 68a0a6f..4a33604 100644
--- a/drivers/acpi/utilities/utmath.c
+++ b/drivers/acpi/utilities/utmath.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -82,7 +82,7 @@
/* Always check for a zero divisor */
if (divisor == 0) {
- ACPI_REPORT_ERROR(("acpi_ut_short_divide: Divide by zero\n"));
+ ACPI_ERROR((AE_INFO, "Divide by zero"));
return_ACPI_STATUS(AE_AML_DIVIDE_BY_ZERO);
}
@@ -144,7 +144,7 @@
/* Always check for a zero divisor */
if (in_divisor == 0) {
- ACPI_REPORT_ERROR(("acpi_ut_divide: Divide by zero\n"));
+ ACPI_ERROR((AE_INFO, "Divide by zero"));
return_ACPI_STATUS(AE_AML_DIVIDE_BY_ZERO);
}
@@ -266,7 +266,7 @@
/* Always check for a zero divisor */
if (divisor == 0) {
- ACPI_REPORT_ERROR(("acpi_ut_short_divide: Divide by zero\n"));
+ ACPI_ERROR((AE_INFO, "Divide by zero"));
return_ACPI_STATUS(AE_AML_DIVIDE_BY_ZERO);
}
@@ -292,7 +292,7 @@
/* Always check for a zero divisor */
if (in_divisor == 0) {
- ACPI_REPORT_ERROR(("acpi_ut_divide: Divide by zero\n"));
+ ACPI_ERROR((AE_INFO, "Divide by zero"));
return_ACPI_STATUS(AE_AML_DIVIDE_BY_ZERO);
}
diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c
index 2ce872d..7364f5f 100644
--- a/drivers/acpi/utilities/utmisc.c
+++ b/drivers/acpi/utilities/utmisc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -63,6 +63,8 @@
acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id)
{
acpi_native_uint i;
+ acpi_native_uint j;
+ acpi_native_uint k;
acpi_status status;
ACPI_FUNCTION_TRACE("ut_allocate_owner_id");
@@ -70,8 +72,8 @@
/* Guard against multiple allocations of ID to the same location */
if (*owner_id) {
- ACPI_REPORT_ERROR(("Owner ID [%2.2X] already exists\n",
- *owner_id));
+ ACPI_ERROR((AE_INFO, "Owner ID [%2.2X] already exists",
+ *owner_id));
return_ACPI_STATUS(AE_ALREADY_EXISTS);
}
@@ -82,31 +84,67 @@
return_ACPI_STATUS(status);
}
- /* Find a free owner ID */
-
- for (i = 0; i < 64; i++) {
- if (!(acpi_gbl_owner_id_mask & (1ULL << i))) {
- ACPI_DEBUG_PRINT((ACPI_DB_VALUES,
- "Current owner_id mask: %16.16LX New ID: %2.2X\n",
- acpi_gbl_owner_id_mask,
- (unsigned int)(i + 1)));
-
- acpi_gbl_owner_id_mask |= (1ULL << i);
- *owner_id = (acpi_owner_id) (i + 1);
- goto exit;
+ /*
+ * Find a free owner ID, cycle through all possible IDs on repeated
+ * allocations. (ACPI_NUM_OWNERID_MASKS + 1) because first index may have
+ * to be scanned twice.
+ */
+ for (i = 0, j = acpi_gbl_last_owner_id_index;
+ i < (ACPI_NUM_OWNERID_MASKS + 1); i++, j++) {
+ if (j >= ACPI_NUM_OWNERID_MASKS) {
+ j = 0; /* Wraparound to start of mask array */
}
+
+ for (k = acpi_gbl_next_owner_id_offset; k < 32; k++) {
+ if (acpi_gbl_owner_id_mask[j] == ACPI_UINT32_MAX) {
+ /* There are no free IDs in this mask */
+
+ break;
+ }
+
+ if (!(acpi_gbl_owner_id_mask[j] & (1 << k))) {
+ /*
+ * Found a free ID. The actual ID is the bit index plus one,
+ * making zero an invalid Owner ID. Save this as the last ID
+ * allocated and update the global ID mask.
+ */
+ acpi_gbl_owner_id_mask[j] |= (1 << k);
+
+ acpi_gbl_last_owner_id_index = (u8) j;
+ acpi_gbl_next_owner_id_offset = (u8) (k + 1);
+
+ /*
+ * Construct encoded ID from the index and bit position
+ *
+ * Note: Last [j].k (bit 255) is never used and is marked
+ * permanently allocated (prevents +1 overflow)
+ */
+ *owner_id =
+ (acpi_owner_id) ((k + 1) + ACPI_MUL_32(j));
+
+ ACPI_DEBUG_PRINT((ACPI_DB_VALUES,
+ "Allocated owner_id: %2.2X\n",
+ (unsigned int)*owner_id));
+ goto exit;
+ }
+ }
+
+ acpi_gbl_next_owner_id_offset = 0;
}
/*
- * If we are here, all owner_ids have been allocated. This probably should
+ * All owner_ids have been allocated. This typically should
* not happen since the IDs are reused after deallocation. The IDs are
* allocated upon table load (one per table) and method execution, and
* they are released when a table is unloaded or a method completes
* execution.
+ *
+ * If this error happens, there may be very deep nesting of invoked control
+ * methods, or there may be a bug where the IDs are not released.
*/
- *owner_id = 0;
status = AE_OWNER_ID_LIMIT;
- ACPI_REPORT_ERROR(("Could not allocate new owner_id (64 max), AE_OWNER_ID_LIMIT\n"));
+ ACPI_ERROR((AE_INFO,
+ "Could not allocate new owner_id (255 max), AE_OWNER_ID_LIMIT"));
exit:
(void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
@@ -123,7 +161,7 @@
* control method or unloading a table. Either way, we would
* ignore any error anyway.
*
- * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 64
+ * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
*
******************************************************************************/
@@ -131,6 +169,8 @@
{
acpi_owner_id owner_id = *owner_id_ptr;
acpi_status status;
+ acpi_native_uint index;
+ u32 bit;
ACPI_FUNCTION_TRACE_U32("ut_release_owner_id", owner_id);
@@ -140,8 +180,8 @@
/* Zero is not a valid owner_iD */
- if ((owner_id == 0) || (owner_id > 64)) {
- ACPI_REPORT_ERROR(("Invalid owner_id: %2.2X\n", owner_id));
+ if (owner_id == 0) {
+ ACPI_ERROR((AE_INFO, "Invalid owner_id: %2.2X", owner_id));
return_VOID;
}
@@ -156,10 +196,19 @@
owner_id--;
+ /* Decode ID to index/offset pair */
+
+ index = ACPI_DIV_32(owner_id);
+ bit = 1 << ACPI_MOD_32(owner_id);
+
/* Free the owner ID only if it is valid */
- if (acpi_gbl_owner_id_mask & (1ULL << owner_id)) {
- acpi_gbl_owner_id_mask ^= (1ULL << owner_id);
+ if (acpi_gbl_owner_id_mask[index] & bit) {
+ acpi_gbl_owner_id_mask[index] ^= bit;
+ } else {
+ ACPI_ERROR((AE_INFO,
+ "Release of non-allocated owner_id: %2.2X",
+ owner_id + 1));
}
(void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
@@ -790,109 +839,97 @@
/*******************************************************************************
*
- * FUNCTION: acpi_ut_get_resource_end_tag
+ * FUNCTION: acpi_ut_error, acpi_ut_warning, acpi_ut_info
*
- * PARAMETERS: obj_desc - The resource template buffer object
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * Format - Printf format string + additional args
*
- * RETURN: Pointer to the end tag
+ * RETURN: None
*
- * DESCRIPTION: Find the END_TAG resource descriptor in a resource template
+ * DESCRIPTION: Print message with module/line/version info
*
******************************************************************************/
-u8 *acpi_ut_get_resource_end_tag(union acpi_operand_object * obj_desc)
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_error(char *module_name, u32 line_number, char *format, ...)
{
- u8 buffer_byte;
- u8 *buffer;
- u8 *end_buffer;
+ va_list args;
- buffer = obj_desc->buffer.pointer;
- end_buffer = buffer + obj_desc->buffer.length;
+ acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number);
- while (buffer < end_buffer) {
- buffer_byte = *buffer;
- if (buffer_byte & ACPI_RDESC_TYPE_MASK) {
- /* Large Descriptor - Length is next 2 bytes */
+ va_start(args, format);
+ acpi_os_vprintf(format, args);
+ acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
+}
- buffer += ((*(buffer + 1) | (*(buffer + 2) << 8)) + 3);
- } else {
- /* Small Descriptor. End Tag will be found here */
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_exception(char *module_name,
+ u32 line_number, acpi_status status, char *format, ...)
+{
+ va_list args;
- if ((buffer_byte & ACPI_RDESC_SMALL_MASK) ==
- ACPI_RDESC_TYPE_END_TAG) {
- /* Found the end tag descriptor, all done. */
+ acpi_os_printf("ACPI Exception (%s-%04d): %s, ", module_name,
+ line_number, acpi_format_exception(status));
- return (buffer);
- }
+ va_start(args, format);
+ acpi_os_vprintf(format, args);
+ acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
+}
- /* Length is in the header */
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_warning(char *module_name, u32 line_number, char *format, ...)
+{
+ va_list args;
- buffer += ((buffer_byte & 0x07) + 1);
- }
- }
+ acpi_os_printf("ACPI Warning (%s-%04d): ", module_name, line_number);
- /* End tag not found */
+ va_start(args, format);
+ acpi_os_vprintf(format, args);
+ acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
+}
- return (NULL);
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_info(char *module_name, u32 line_number, char *format, ...)
+{
+ va_list args;
+
+ acpi_os_printf("ACPI (%s-%04d): ", module_name, line_number);
+
+ va_start(args, format);
+ acpi_os_vprintf(format, args);
+ acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
}
/*******************************************************************************
*
- * FUNCTION: acpi_ut_report_error
+ * FUNCTION: acpi_ut_report_error, Warning, Info
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * component_id - Caller's component ID (for error output)
*
* RETURN: None
*
* DESCRIPTION: Print error message
*
+ * Note: Legacy only, should be removed when no longer used by drivers.
+ *
******************************************************************************/
-void acpi_ut_report_error(char *module_name, u32 line_number, u32 component_id)
+void acpi_ut_report_error(char *module_name, u32 line_number)
{
- acpi_os_printf("%8s-%04d: *** Error: ", module_name, line_number);
+ acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number);
}
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_report_warning
- *
- * PARAMETERS: module_name - Caller's module name (for error output)
- * line_number - Caller's line number (for error output)
- * component_id - Caller's component ID (for error output)
- *
- * RETURN: None
- *
- * DESCRIPTION: Print warning message
- *
- ******************************************************************************/
-
-void
-acpi_ut_report_warning(char *module_name, u32 line_number, u32 component_id)
+void acpi_ut_report_warning(char *module_name, u32 line_number)
{
- acpi_os_printf("%8s-%04d: *** Warning: ", module_name, line_number);
+ acpi_os_printf("ACPI Warning (%s-%04d): ", module_name, line_number);
}
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_report_info
- *
- * PARAMETERS: module_name - Caller's module name (for error output)
- * line_number - Caller's line number (for error output)
- * component_id - Caller's component ID (for error output)
- *
- * RETURN: None
- *
- * DESCRIPTION: Print information message
- *
- ******************************************************************************/
-
-void acpi_ut_report_info(char *module_name, u32 line_number, u32 component_id)
+void acpi_ut_report_info(char *module_name, u32 line_number)
{
- acpi_os_printf("%8s-%04d: *** Info: ", module_name, line_number);
+ acpi_os_printf("ACPI (%s-%04d): ", module_name, line_number);
}
diff --git a/drivers/acpi/utilities/utmutex.c b/drivers/acpi/utilities/utmutex.c
index 90134c5..45a7244 100644
--- a/drivers/acpi/utilities/utmutex.c
+++ b/drivers/acpi/utilities/utmutex.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -214,23 +214,22 @@
* the ACPI subsystem code.
*/
for (i = mutex_id; i < MAX_MUTEX; i++) {
- if (acpi_gbl_mutex_info[i].owner_id == this_thread_id) {
+ if (acpi_gbl_mutex_info[i].thread_id == this_thread_id) {
if (i == mutex_id) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Mutex [%s] already acquired by this thread [%X]\n",
- acpi_ut_get_mutex_name
- (mutex_id),
- this_thread_id));
+ ACPI_ERROR((AE_INFO,
+ "Mutex [%s] already acquired by this thread [%X]",
+ acpi_ut_get_mutex_name
+ (mutex_id),
+ this_thread_id));
return (AE_ALREADY_ACQUIRED);
}
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid acquire order: Thread %X owns [%s], wants [%s]\n",
- this_thread_id,
- acpi_ut_get_mutex_name(i),
- acpi_ut_get_mutex_name
- (mutex_id)));
+ ACPI_ERROR((AE_INFO,
+ "Invalid acquire order: Thread %X owns [%s], wants [%s]",
+ this_thread_id,
+ acpi_ut_get_mutex_name(i),
+ acpi_ut_get_mutex_name(mutex_id)));
return (AE_ACQUIRE_DEADLOCK);
}
@@ -253,11 +252,9 @@
acpi_gbl_mutex_info[mutex_id].use_count++;
acpi_gbl_mutex_info[mutex_id].thread_id = this_thread_id;
} else {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Thread %X could not acquire Mutex [%s] %s\n",
- this_thread_id,
- acpi_ut_get_mutex_name(mutex_id),
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Thread %X could not acquire Mutex [%X]",
+ this_thread_id, mutex_id));
}
return (status);
@@ -295,9 +292,9 @@
* Mutex must be acquired in order to release it!
*/
if (acpi_gbl_mutex_info[mutex_id].thread_id == ACPI_MUTEX_NOT_ACQUIRED) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Mutex [%s] is not acquired, cannot release\n",
- acpi_ut_get_mutex_name(mutex_id)));
+ ACPI_ERROR((AE_INFO,
+ "Mutex [%X] is not acquired, cannot release",
+ mutex_id));
return (AE_NOT_ACQUIRED);
}
@@ -313,16 +310,15 @@
* the ACPI subsystem code.
*/
for (i = mutex_id; i < MAX_MUTEX; i++) {
- if (acpi_gbl_mutex_info[i].owner_id == this_thread_id) {
+ if (acpi_gbl_mutex_info[i].thread_id == this_thread_id) {
if (i == mutex_id) {
continue;
}
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Invalid release order: owns [%s], releasing [%s]\n",
- acpi_ut_get_mutex_name(i),
- acpi_ut_get_mutex_name
- (mutex_id)));
+ ACPI_ERROR((AE_INFO,
+ "Invalid release order: owns [%s], releasing [%s]",
+ acpi_ut_get_mutex_name(i),
+ acpi_ut_get_mutex_name(mutex_id)));
return (AE_RELEASE_DEADLOCK);
}
@@ -338,11 +334,9 @@
acpi_os_signal_semaphore(acpi_gbl_mutex_info[mutex_id].mutex, 1);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Thread %X could not release Mutex [%s] %s\n",
- this_thread_id,
- acpi_ut_get_mutex_name(mutex_id),
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Thread %X could not release Mutex [%X]",
+ this_thread_id, mutex_id));
} else {
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
"Thread %X released Mutex [%s]\n",
diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c
index 3015e15..7ee2d1d 100644
--- a/drivers/acpi/utilities/utobject.c
+++ b/drivers/acpi/utilities/utobject.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -177,7 +177,8 @@
buffer = ACPI_MEM_CALLOCATE(buffer_size);
if (!buffer) {
- ACPI_REPORT_ERROR(("create_buffer: could not allocate size %X\n", (u32) buffer_size));
+ ACPI_ERROR((AE_INFO, "Could not allocate size %X",
+ (u32) buffer_size));
acpi_ut_remove_reference(buffer_desc);
return_PTR(NULL);
}
@@ -228,7 +229,8 @@
*/
string = ACPI_MEM_CALLOCATE(string_size + 1);
if (!string) {
- ACPI_REPORT_ERROR(("create_string: could not allocate size %X\n", (u32) string_size));
+ ACPI_ERROR((AE_INFO, "Could not allocate size %X",
+ (u32) string_size));
acpi_ut_remove_reference(string_desc);
return_PTR(NULL);
}
@@ -310,8 +312,8 @@
object = acpi_os_acquire_object(acpi_gbl_operand_cache);
if (!object) {
- _ACPI_REPORT_ERROR(module_name, line_number, component_id,
- ("Could not allocate an object descriptor\n"));
+ ACPI_ERROR((module_name, line_number,
+ "Could not allocate an object descriptor"));
return_PTR(NULL);
}
@@ -345,9 +347,9 @@
/* Object must be an union acpi_operand_object */
if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "%p is not an ACPI Operand object [%s]\n",
- object, acpi_ut_get_descriptor_name(object)));
+ ACPI_ERROR((AE_INFO,
+ "%p is not an ACPI Operand object [%s]", object,
+ acpi_ut_get_descriptor_name(object)));
return_VOID;
}
@@ -449,10 +451,10 @@
* Notably, Locals and Args are not supported, but this may be
* required eventually.
*/
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unsupported Reference opcode=%X in object %p\n",
- internal_object->reference.opcode,
- internal_object));
+ ACPI_ERROR((AE_INFO,
+ "Unsupported Reference opcode=%X in object %p",
+ internal_object->reference.opcode,
+ internal_object));
status = AE_TYPE;
break;
}
@@ -460,10 +462,9 @@
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unsupported type=%X in object %p\n",
- ACPI_GET_OBJECT_TYPE(internal_object),
- internal_object));
+ ACPI_ERROR((AE_INFO, "Unsupported type=%X in object %p",
+ ACPI_GET_OBJECT_TYPE(internal_object),
+ internal_object));
status = AE_TYPE;
break;
}
diff --git a/drivers/acpi/utilities/utresrc.c b/drivers/acpi/utilities/utresrc.c
new file mode 100644
index 0000000..1646131
--- /dev/null
+++ b/drivers/acpi/utilities/utresrc.c
@@ -0,0 +1,554 @@
+/*******************************************************************************
+ *
+ * Module Name: utresrc - Resource managment utilities
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2006, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include <acpi/amlresrc.h>
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utmisc")
+
+#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
+/*
+ * Strings used to decode resource descriptors.
+ * Used by both the disasssembler and the debugger resource dump routines
+ */
+const char *acpi_gbl_BMdecode[2] = {
+ "not_bus_master",
+ "bus_master"
+};
+
+const char *acpi_gbl_config_decode[4] = {
+ "0 - Good Configuration",
+ "1 - Acceptable Configuration",
+ "2 - Suboptimal Configuration",
+ "3 - ***Invalid Configuration***",
+};
+
+const char *acpi_gbl_consume_decode[2] = {
+ "resource_producer",
+ "resource_consumer"
+};
+
+const char *acpi_gbl_DECdecode[2] = {
+ "pos_decode",
+ "sub_decode"
+};
+
+const char *acpi_gbl_HEdecode[2] = {
+ "Level",
+ "Edge"
+};
+
+const char *acpi_gbl_io_decode[2] = {
+ "Decode10",
+ "Decode16"
+};
+
+const char *acpi_gbl_LLdecode[2] = {
+ "active_high",
+ "active_low"
+};
+
+const char *acpi_gbl_max_decode[2] = {
+ "max_not_fixed",
+ "max_fixed"
+};
+
+const char *acpi_gbl_MEMdecode[4] = {
+ "non_cacheable",
+ "Cacheable",
+ "write_combining",
+ "Prefetchable"
+};
+
+const char *acpi_gbl_min_decode[2] = {
+ "min_not_fixed",
+ "min_fixed"
+};
+
+const char *acpi_gbl_MTPdecode[4] = {
+ "address_range_memory",
+ "address_range_reserved",
+ "address_range_aCPI",
+ "address_range_nVS"
+};
+
+const char *acpi_gbl_RNGdecode[4] = {
+ "invalid_ranges",
+ "non_iSAonly_ranges",
+ "ISAonly_ranges",
+ "entire_range"
+};
+
+const char *acpi_gbl_RWdecode[2] = {
+ "read_only",
+ "read_write"
+};
+
+const char *acpi_gbl_SHRdecode[2] = {
+ "Exclusive",
+ "Shared"
+};
+
+const char *acpi_gbl_SIZdecode[4] = {
+ "Transfer8",
+ "Transfer8_16",
+ "Transfer16",
+ "invalid_size"
+};
+
+const char *acpi_gbl_TRSdecode[2] = {
+ "dense_translation",
+ "sparse_translation"
+};
+
+const char *acpi_gbl_TTPdecode[2] = {
+ "type_static",
+ "type_translation"
+};
+
+const char *acpi_gbl_TYPdecode[4] = {
+ "Compatibility",
+ "type_a",
+ "type_b",
+ "type_f"
+};
+
+#endif
+
+/*
+ * Base sizes of the raw AML resource descriptors, indexed by resource type.
+ * Zero indicates a reserved (and therefore invalid) resource type.
+ */
+const u8 acpi_gbl_resource_aml_sizes[] = {
+ /* Small descriptors */
+
+ 0,
+ 0,
+ 0,
+ 0,
+ ACPI_AML_SIZE_SMALL(struct aml_resource_irq),
+ ACPI_AML_SIZE_SMALL(struct aml_resource_dma),
+ ACPI_AML_SIZE_SMALL(struct aml_resource_start_dependent),
+ ACPI_AML_SIZE_SMALL(struct aml_resource_end_dependent),
+ ACPI_AML_SIZE_SMALL(struct aml_resource_io),
+ ACPI_AML_SIZE_SMALL(struct aml_resource_fixed_io),
+ 0,
+ 0,
+ 0,
+ 0,
+ ACPI_AML_SIZE_SMALL(struct aml_resource_vendor_small),
+ ACPI_AML_SIZE_SMALL(struct aml_resource_end_tag),
+
+ /* Large descriptors */
+
+ 0,
+ ACPI_AML_SIZE_LARGE(struct aml_resource_memory24),
+ ACPI_AML_SIZE_LARGE(struct aml_resource_generic_register),
+ 0,
+ ACPI_AML_SIZE_LARGE(struct aml_resource_vendor_large),
+ ACPI_AML_SIZE_LARGE(struct aml_resource_memory32),
+ ACPI_AML_SIZE_LARGE(struct aml_resource_fixed_memory32),
+ ACPI_AML_SIZE_LARGE(struct aml_resource_address32),
+ ACPI_AML_SIZE_LARGE(struct aml_resource_address16),
+ ACPI_AML_SIZE_LARGE(struct aml_resource_extended_irq),
+ ACPI_AML_SIZE_LARGE(struct aml_resource_address64),
+ ACPI_AML_SIZE_LARGE(struct aml_resource_extended_address64)
+};
+
+/*
+ * Resource types, used to validate the resource length field.
+ * The length of fixed-length types must match exactly, variable
+ * lengths must meet the minimum required length, etc.
+ * Zero indicates a reserved (and therefore invalid) resource type.
+ */
+static const u8 acpi_gbl_resource_types[] = {
+ /* Small descriptors */
+
+ 0,
+ 0,
+ 0,
+ 0,
+ ACPI_SMALL_VARIABLE_LENGTH,
+ ACPI_FIXED_LENGTH,
+ ACPI_SMALL_VARIABLE_LENGTH,
+ ACPI_FIXED_LENGTH,
+ ACPI_FIXED_LENGTH,
+ ACPI_FIXED_LENGTH,
+ 0,
+ 0,
+ 0,
+ 0,
+ ACPI_VARIABLE_LENGTH,
+ ACPI_FIXED_LENGTH,
+
+ /* Large descriptors */
+
+ 0,
+ ACPI_FIXED_LENGTH,
+ ACPI_FIXED_LENGTH,
+ 0,
+ ACPI_VARIABLE_LENGTH,
+ ACPI_FIXED_LENGTH,
+ ACPI_FIXED_LENGTH,
+ ACPI_VARIABLE_LENGTH,
+ ACPI_VARIABLE_LENGTH,
+ ACPI_VARIABLE_LENGTH,
+ ACPI_VARIABLE_LENGTH,
+ ACPI_FIXED_LENGTH
+};
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_validate_resource
+ *
+ * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * return_index - Where the resource index is returned. NULL
+ * if the index is not required.
+ *
+ * RETURN: Status, and optionally the Index into the global resource tables
+ *
+ * DESCRIPTION: Validate an AML resource descriptor by checking the Resource
+ * Type and Resource Length. Returns an index into the global
+ * resource information/dispatch tables for later use.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index)
+{
+ u8 resource_type;
+ u8 resource_index;
+ acpi_rs_length resource_length;
+ acpi_rs_length minimum_resource_length;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /*
+ * 1) Validate the resource_type field (Byte 0)
+ */
+ resource_type = ACPI_GET8(aml);
+
+ /*
+ * Byte 0 contains the descriptor name (Resource Type)
+ * Examine the large/small bit in the resource header
+ */
+ if (resource_type & ACPI_RESOURCE_NAME_LARGE) {
+ /* Verify the large resource type (name) against the max */
+
+ if (resource_type > ACPI_RESOURCE_NAME_LARGE_MAX) {
+ return (AE_AML_INVALID_RESOURCE_TYPE);
+ }
+
+ /*
+ * Large Resource Type -- bits 6:0 contain the name
+ * Translate range 0x80-0x8B to index range 0x10-0x1B
+ */
+ resource_index = (u8) (resource_type - 0x70);
+ } else {
+ /*
+ * Small Resource Type -- bits 6:3 contain the name
+ * Shift range to index range 0x00-0x0F
+ */
+ resource_index = (u8)
+ ((resource_type & ACPI_RESOURCE_NAME_SMALL_MASK) >> 3);
+ }
+
+ /* Check validity of the resource type, zero indicates name is invalid */
+
+ if (!acpi_gbl_resource_types[resource_index]) {
+ return (AE_AML_INVALID_RESOURCE_TYPE);
+ }
+
+ /*
+ * 2) Validate the resource_length field. This ensures that the length
+ * is at least reasonable, and guarantees that it is non-zero.
+ */
+ resource_length = acpi_ut_get_resource_length(aml);
+ minimum_resource_length = acpi_gbl_resource_aml_sizes[resource_index];
+
+ /* Validate based upon the type of resource - fixed length or variable */
+
+ switch (acpi_gbl_resource_types[resource_index]) {
+ case ACPI_FIXED_LENGTH:
+
+ /* Fixed length resource, length must match exactly */
+
+ if (resource_length != minimum_resource_length) {
+ return (AE_AML_BAD_RESOURCE_LENGTH);
+ }
+ break;
+
+ case ACPI_VARIABLE_LENGTH:
+
+ /* Variable length resource, length must be at least the minimum */
+
+ if (resource_length < minimum_resource_length) {
+ return (AE_AML_BAD_RESOURCE_LENGTH);
+ }
+ break;
+
+ case ACPI_SMALL_VARIABLE_LENGTH:
+
+ /* Small variable length resource, length can be (Min) or (Min-1) */
+
+ if ((resource_length > minimum_resource_length) ||
+ (resource_length < (minimum_resource_length - 1))) {
+ return (AE_AML_BAD_RESOURCE_LENGTH);
+ }
+ break;
+
+ default:
+
+ /* Shouldn't happen (because of validation earlier), but be sure */
+
+ return (AE_AML_INVALID_RESOURCE_TYPE);
+ }
+
+ /* Optionally return the resource table index */
+
+ if (return_index) {
+ *return_index = resource_index;
+ }
+
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_get_resource_type
+ *
+ * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ *
+ * RETURN: The Resource Type with no extraneous bits (except the
+ * Large/Small descriptor bit -- this is left alone)
+ *
+ * DESCRIPTION: Extract the Resource Type/Name from the first byte of
+ * a resource descriptor.
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_get_resource_type(void *aml)
+{
+ ACPI_FUNCTION_ENTRY();
+
+ /*
+ * Byte 0 contains the descriptor name (Resource Type)
+ * Examine the large/small bit in the resource header
+ */
+ if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) {
+ /* Large Resource Type -- bits 6:0 contain the name */
+
+ return (ACPI_GET8(aml));
+ } else {
+ /* Small Resource Type -- bits 6:3 contain the name */
+
+ return ((u8) (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_SMALL_MASK));
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_get_resource_length
+ *
+ * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ *
+ * RETURN: Byte Length
+ *
+ * DESCRIPTION: Get the "Resource Length" of a raw AML descriptor. By
+ * definition, this does not include the size of the descriptor
+ * header or the length field itself.
+ *
+ ******************************************************************************/
+
+u16 acpi_ut_get_resource_length(void *aml)
+{
+ acpi_rs_length resource_length;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /*
+ * Byte 0 contains the descriptor name (Resource Type)
+ * Examine the large/small bit in the resource header
+ */
+ if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) {
+ /* Large Resource type -- bytes 1-2 contain the 16-bit length */
+
+ ACPI_MOVE_16_TO_16(&resource_length, ACPI_ADD_PTR(u8, aml, 1));
+
+ } else {
+ /* Small Resource type -- bits 2:0 of byte 0 contain the length */
+
+ resource_length = (u16) (ACPI_GET8(aml) &
+ ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK);
+ }
+
+ return (resource_length);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_get_resource_header_length
+ *
+ * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ *
+ * RETURN: Length of the AML header (depends on large/small descriptor)
+ *
+ * DESCRIPTION: Get the length of the header for this resource.
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_get_resource_header_length(void *aml)
+{
+ ACPI_FUNCTION_ENTRY();
+
+ /* Examine the large/small bit in the resource header */
+
+ if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) {
+ return (sizeof(struct aml_resource_large_header));
+ } else {
+ return (sizeof(struct aml_resource_small_header));
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_get_descriptor_length
+ *
+ * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ *
+ * RETURN: Byte length
+ *
+ * DESCRIPTION: Get the total byte length of a raw AML descriptor, including the
+ * length of the descriptor header and the length field itself.
+ * Used to walk descriptor lists.
+ *
+ ******************************************************************************/
+
+u32 acpi_ut_get_descriptor_length(void *aml)
+{
+ ACPI_FUNCTION_ENTRY();
+
+ /*
+ * Get the Resource Length (does not include header length) and add
+ * the header length (depends on if this is a small or large resource)
+ */
+ return (acpi_ut_get_resource_length(aml) +
+ acpi_ut_get_resource_header_length(aml));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_get_resource_end_tag
+ *
+ * PARAMETERS: obj_desc - The resource template buffer object
+ * end_tag - Where the pointer to the end_tag is returned
+ *
+ * RETURN: Status, pointer to the end tag
+ *
+ * DESCRIPTION: Find the end_tag resource descriptor in an AML resource template
+ * Note: allows a buffer length of zero.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_get_resource_end_tag(union acpi_operand_object * obj_desc,
+ u8 ** end_tag)
+{
+ acpi_status status;
+ u8 *aml;
+ u8 *end_aml;
+
+ ACPI_FUNCTION_TRACE("ut_get_resource_end_tag");
+
+ /* Get start and end pointers */
+
+ aml = obj_desc->buffer.pointer;
+ end_aml = aml + obj_desc->buffer.length;
+
+ /* Allow a buffer length of zero */
+
+ if (!obj_desc->buffer.length) {
+ *end_tag = aml;
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ /* Walk the resource template, one descriptor per iteration */
+
+ while (aml < end_aml) {
+ /* Validate the Resource Type and Resource Length */
+
+ status = acpi_ut_validate_resource(aml, NULL);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* end_tag resource indicates the end of the resource template */
+
+ if (acpi_ut_get_resource_type(aml) ==
+ ACPI_RESOURCE_NAME_END_TAG) {
+ /*
+ * There must be at least one more byte in the buffer for
+ * the 2nd byte of the end_tag
+ */
+ if ((aml + 1) >= end_aml) {
+ return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
+ }
+
+ /* Return the pointer to the end_tag */
+
+ *end_tag = aml;
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ /*
+ * Point to the next resource descriptor in the AML buffer. The
+ * descriptor length is guaranteed to be non-zero by resource
+ * validation above.
+ */
+ aml += acpi_ut_get_descriptor_length(aml);
+ }
+
+ /* Did not find an end_tag resource descriptor */
+
+ return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
+}
diff --git a/drivers/acpi/utilities/utstate.c b/drivers/acpi/utilities/utstate.c
index c1cb275..4b134a7 100644
--- a/drivers/acpi/utilities/utstate.c
+++ b/drivers/acpi/utilities/utstate.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -63,7 +63,7 @@
acpi_ut_create_pkg_state_and_push(void *internal_object,
void *external_object,
u16 index,
- union acpi_generic_state ** state_list)
+ union acpi_generic_state **state_list)
{
union acpi_generic_state *state;
diff --git a/drivers/acpi/utilities/utxface.c b/drivers/acpi/utilities/utxface.c
index f06bd5e..308a960 100644
--- a/drivers/acpi/utilities/utxface.c
+++ b/drivers/acpi/utilities/utxface.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -75,8 +75,7 @@
status = acpi_os_initialize();
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("OSD failed to initialize, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status, "During OSL initialization"));
return_ACPI_STATUS(status);
}
@@ -88,8 +87,8 @@
status = acpi_ut_mutex_initialize();
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Global mutex creation failure, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "During Global Mutex creation"));
return_ACPI_STATUS(status);
}
@@ -99,15 +98,14 @@
*/
status = acpi_ns_root_initialize();
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("Namespace initialization failure, %s\n",
- acpi_format_exception(status)));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "During Namespace initialization"));
return_ACPI_STATUS(status);
}
/* If configured, initialize the AML debugger */
ACPI_DEBUGGER_EXEC(status = acpi_db_initialize());
-
return_ACPI_STATUS(status);
}
@@ -154,8 +152,7 @@
status = acpi_enable();
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "acpi_enable failed.\n"));
+ ACPI_WARNING((AE_INFO, "acpi_enable failed"));
return_ACPI_STATUS(status);
}
}
@@ -178,10 +175,14 @@
/*
* Initialize ACPI Event handling (Fixed and General Purpose)
*
- * NOTE: We must have the hardware AND events initialized before we can
- * execute ANY control methods SAFELY. Any control method can require
- * ACPI hardware support, so the hardware MUST be initialized before
- * execution!
+ * Note1: We must have the hardware and events initialized before we can
+ * execute any control methods safely. Any control method can require
+ * ACPI hardware support, so the hardware must be fully initialized before
+ * any method execution!
+ *
+ * Note2: Fixed events are initialized and enabled here. GPEs are
+ * initialized, but cannot be enabled until after the hardware is
+ * completely initialized (SCI and global_lock activated)
*/
if (!(flags & ACPI_NO_EVENT_INIT)) {
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
@@ -193,8 +194,10 @@
}
}
- /* Install the SCI handler and Global Lock handler */
-
+ /*
+ * Install the SCI handler and Global Lock handler. This completes the
+ * hardware initialization.
+ */
if (!(flags & ACPI_NO_HANDLER_INIT)) {
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"[Init] Installing SCI/GL handlers\n"));
@@ -205,6 +208,24 @@
}
}
+ /*
+ * Complete the GPE initialization for the GPE blocks defined in the FADT
+ * (GPE block 0 and 1).
+ *
+ * Note1: This is where the _PRW methods are executed for the GPEs. These
+ * methods can only be executed after the SCI and Global Lock handlers are
+ * installed and initialized.
+ *
+ * Note2: Currently, there seems to be no need to run the _REG methods
+ * before execution of the _PRW methods and enabling of the GPEs.
+ */
+ if (!(flags & ACPI_NO_EVENT_INIT)) {
+ status = acpi_ev_install_fadt_gpes();
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ }
+
return_ACPI_STATUS(status);
}
@@ -230,9 +251,9 @@
/*
* Run all _REG methods
*
- * NOTE: Any objects accessed
- * by the _REG methods will be automatically initialized, even if they
- * contain executable AML (see call to acpi_ns_initialize_objects below).
+ * Note: Any objects accessed by the _REG methods will be automatically
+ * initialized, even if they contain executable AML (see the call to
+ * acpi_ns_initialize_objects below).
*/
if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
@@ -245,9 +266,9 @@
}
/*
- * Initialize the objects that remain uninitialized. This
- * runs the executable AML that may be part of the declaration of these
- * objects: operation_regions, buffer_fields, Buffers, and Packages.
+ * Initialize the objects that remain uninitialized. This runs the
+ * executable AML that may be part of the declaration of these objects:
+ * operation_regions, buffer_fields, Buffers, and Packages.
*/
if (!(flags & ACPI_NO_OBJECT_INIT)) {
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
@@ -260,8 +281,8 @@
}
/*
- * Initialize all device objects in the namespace
- * This runs the _STA and _INI methods.
+ * Initialize all device objects in the namespace. This runs the device
+ * _STA and _INI methods.
*/
if (!(flags & ACPI_NO_DEVICE_INIT)) {
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index d10668f..bd48875 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -920,8 +920,8 @@
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Unable to create 'state' fs entry\n"));
else {
+ acpi_video_device_state_fops.write = acpi_video_device_write_state;
entry->proc_fops = &acpi_video_device_state_fops;
- entry->proc_fops->write = acpi_video_device_write_state;
entry->data = acpi_driver_data(device);
entry->owner = THIS_MODULE;
}
@@ -934,8 +934,8 @@
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Unable to create 'brightness' fs entry\n"));
else {
+ acpi_video_device_brightness_fops.write = acpi_video_device_write_brightness;
entry->proc_fops = &acpi_video_device_brightness_fops;
- entry->proc_fops->write = acpi_video_device_write_brightness;
entry->data = acpi_driver_data(device);
entry->owner = THIS_MODULE;
}
@@ -1239,8 +1239,8 @@
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Unable to create 'POST' fs entry\n"));
else {
+ acpi_video_bus_POST_fops.write = acpi_video_bus_write_POST;
entry->proc_fops = &acpi_video_bus_POST_fops;
- entry->proc_fops->write = acpi_video_bus_write_POST;
entry->data = acpi_driver_data(device);
entry->owner = THIS_MODULE;
}
@@ -1253,8 +1253,8 @@
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Unable to create 'DOS' fs entry\n"));
else {
+ acpi_video_bus_DOS_fops.write = acpi_video_bus_write_DOS;
entry->proc_fops = &acpi_video_bus_DOS_fops;
- entry->proc_fops->write = acpi_video_bus_write_DOS;
entry->data = acpi_driver_data(device);
entry->owner = THIS_MODULE;
}
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index f12898d..e99471d 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_FW_LOADER) += firmware_class.o
obj-$(CONFIG_NUMA) += node.o
obj-$(CONFIG_MEMORY_HOTPLUG) += memory.o
+obj-$(CONFIG_SMP) += topology.o
ifeq ($(CONFIG_DEBUG_DRIVER),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/base/base.h b/drivers/base/base.h
index e3b548d..5735b38 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -19,6 +19,10 @@
extern void driver_detach(struct device_driver * drv);
extern int driver_probe_device(struct device_driver *, struct device *);
+extern void sysdev_shutdown(void);
+extern int sysdev_suspend(pm_message_t state);
+extern int sysdev_resume(void);
+
static inline struct class_device *to_class_dev(struct kobject *obj)
{
return container_of(obj, struct class_device, kobj);
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 29f6af5..c314156 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -133,6 +133,8 @@
decl_subsys(bus, &ktype_bus, NULL);
+#ifdef CONFIG_HOTPLUG
+
/* Manually detach a device from its associated driver. */
static int driver_helper(struct device *dev, void *data)
{
@@ -193,6 +195,7 @@
}
static DRIVER_ATTR(bind, S_IWUSR, NULL, driver_bind);
+#endif
static struct device * next_device(struct klist_iter * i)
{
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index d1a0522..105a0d6 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -303,7 +303,7 @@
*/
#ifdef CONFIG_ARCH_MEMORY_PROBE
static ssize_t
-memory_probe_store(struct class *class, const char __user *buf, size_t count)
+memory_probe_store(struct class *class, const char *buf, size_t count)
{
u64 phys_addr;
int ret;
diff --git a/drivers/base/power/resume.c b/drivers/base/power/resume.c
index 0a7aa07..317edbf 100644
--- a/drivers/base/power/resume.c
+++ b/drivers/base/power/resume.c
@@ -9,10 +9,9 @@
*/
#include <linux/device.h>
+#include "../base.h"
#include "power.h"
-extern int sysdev_resume(void);
-
/**
* resume_device - Restore state for one device.
diff --git a/drivers/base/power/shutdown.c b/drivers/base/power/shutdown.c
index c2475f3..8826a5b 100644
--- a/drivers/base/power/shutdown.c
+++ b/drivers/base/power/shutdown.c
@@ -12,6 +12,7 @@
#include <linux/device.h>
#include <asm/semaphore.h>
+#include "../base.h"
#include "power.h"
#define to_dev(node) container_of(node, struct device, kobj.entry)
@@ -28,7 +29,6 @@
* they only get one called once when interrupts are disabled.
*/
-extern int sysdev_shutdown(void);
/**
* device_shutdown - call ->shutdown() on each device to shutdown.
diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c
index 5050176..8660779 100644
--- a/drivers/base/power/suspend.c
+++ b/drivers/base/power/suspend.c
@@ -9,10 +9,9 @@
*/
#include <linux/device.h>
+#include "../base.h"
#include "power.h"
-extern int sysdev_suspend(pm_message_t state);
-
/*
* The entries in the dpm_active list are in a depth first order, simply
* because children are guaranteed to be discovered after parents, and
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index f3a0c56..40d7242 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -27,22 +27,30 @@
static ssize_t state_show(struct device * dev, struct device_attribute *attr, char * buf)
{
- return sprintf(buf, "%u\n", dev->power.power_state.event);
+ if (dev->power.power_state.event)
+ return sprintf(buf, "2\n");
+ else
+ return sprintf(buf, "0\n");
}
static ssize_t state_store(struct device * dev, struct device_attribute *attr, const char * buf, size_t n)
{
pm_message_t state;
- char * rest;
- int error = 0;
+ int error = -EINVAL;
- state.event = simple_strtoul(buf, &rest, 10);
- if (*rest)
- return -EINVAL;
- if (state.event)
+ state.event = PM_EVENT_SUSPEND;
+ /* Older apps expected to write "3" here - confused with PCI D3 */
+ if ((n == 1) && !strcmp(buf, "3"))
error = dpm_runtime_suspend(dev, state);
- else
+
+ if ((n == 1) && !strcmp(buf, "2"))
+ error = dpm_runtime_suspend(dev, state);
+
+ if ((n == 1) && !strcmp(buf, "0")) {
dpm_runtime_resume(dev);
+ error = 0;
+ }
+
return error ? error : n;
}
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 66ed8f2..6fc23ab 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -21,8 +21,11 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/pm.h>
+#include <linux/device.h>
#include <asm/semaphore.h>
+#include "base.h"
+
extern struct subsystem devices_subsys;
#define to_sysdev(k) container_of(k, struct sys_device, kobj)
diff --git a/drivers/base/topology.c b/drivers/base/topology.c
new file mode 100644
index 0000000..915810f6
--- /dev/null
+++ b/drivers/base/topology.c
@@ -0,0 +1,148 @@
+/*
+ * driver/base/topology.c - Populate sysfs with cpu topology information
+ *
+ * Written by: Zhang Yanmin, Intel Corporation
+ *
+ * Copyright (C) 2006, Intel Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/sysdev.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include <linux/topology.h>
+
+#define define_one_ro(_name) \
+static SYSDEV_ATTR(_name, 0444, show_##_name, NULL)
+
+#define define_id_show_func(name) \
+static ssize_t show_##name(struct sys_device *dev, char *buf) \
+{ \
+ unsigned int cpu = dev->id; \
+ return sprintf(buf, "%d\n", topology_##name(cpu)); \
+}
+
+#define define_siblings_show_func(name) \
+static ssize_t show_##name(struct sys_device *dev, char *buf) \
+{ \
+ ssize_t len = -1; \
+ unsigned int cpu = dev->id; \
+ len = cpumask_scnprintf(buf, NR_CPUS+1, topology_##name(cpu)); \
+ return (len + sprintf(buf + len, "\n")); \
+}
+
+#ifdef topology_physical_package_id
+define_id_show_func(physical_package_id);
+define_one_ro(physical_package_id);
+#define ref_physical_package_id_attr &attr_physical_package_id.attr,
+#else
+#define ref_physical_package_id_attr
+#endif
+
+#ifdef topology_core_id
+define_id_show_func(core_id);
+define_one_ro(core_id);
+#define ref_core_id_attr &attr_core_id.attr,
+#else
+#define ref_core_id_attr
+#endif
+
+#ifdef topology_thread_siblings
+define_siblings_show_func(thread_siblings);
+define_one_ro(thread_siblings);
+#define ref_thread_siblings_attr &attr_thread_siblings.attr,
+#else
+#define ref_thread_siblings_attr
+#endif
+
+#ifdef topology_core_siblings
+define_siblings_show_func(core_siblings);
+define_one_ro(core_siblings);
+#define ref_core_siblings_attr &attr_core_siblings.attr,
+#else
+#define ref_core_siblings_attr
+#endif
+
+static struct attribute *default_attrs[] = {
+ ref_physical_package_id_attr
+ ref_core_id_attr
+ ref_thread_siblings_attr
+ ref_core_siblings_attr
+ NULL
+};
+
+static struct attribute_group topology_attr_group = {
+ .attrs = default_attrs,
+ .name = "topology"
+};
+
+/* Add/Remove cpu_topology interface for CPU device */
+static int __cpuinit topology_add_dev(struct sys_device * sys_dev)
+{
+ sysfs_create_group(&sys_dev->kobj, &topology_attr_group);
+ return 0;
+}
+
+static int __cpuinit topology_remove_dev(struct sys_device * sys_dev)
+{
+ sysfs_remove_group(&sys_dev->kobj, &topology_attr_group);
+ return 0;
+}
+
+static int __cpuinit topology_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+ struct sys_device *sys_dev;
+
+ sys_dev = get_cpu_sysdev(cpu);
+ switch (action) {
+ case CPU_ONLINE:
+ topology_add_dev(sys_dev);
+ break;
+ case CPU_DEAD:
+ topology_remove_dev(sys_dev);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block topology_cpu_notifier =
+{
+ .notifier_call = topology_cpu_callback,
+};
+
+static int __cpuinit topology_sysfs_init(void)
+{
+ int i;
+
+ for_each_online_cpu(i) {
+ topology_cpu_callback(&topology_cpu_notifier, CPU_ONLINE,
+ (void *)(long)i);
+ }
+
+ register_cpu_notifier(&topology_cpu_notifier);
+
+ return 0;
+}
+
+device_initcall(topology_sysfs_init);
+
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 139cbba..8b13316 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -433,12 +433,12 @@
This controls the maximum number of active concurrent packets. More
concurrent packets can increase write performance, but also require
more memory. Each concurrent packet will require approximately 64Kb
- of non-swappable kernel memory, memory which will be allocated at
- pktsetup time.
+ of non-swappable kernel memory, memory which will be allocated when
+ a disc is opened for writing.
config CDROM_PKTCDVD_WCACHE
- bool "Enable write caching"
- depends on CDROM_PKTCDVD
+ bool "Enable write caching (EXPERIMENTAL)"
+ depends on CDROM_PKTCDVD && EXPERIMENTAL
help
If enabled, write caching will be set for the CD-R/W device. For now
this option is dangerous unless the CD-RW media is known good, as we
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 12d7b9b..0d65394 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -2183,6 +2183,7 @@
{
CommandList_struct *cmd = rq->completion_data;
ctlr_info_t *h = hba[cmd->ctlr];
+ unsigned long flags;
u64bit temp64;
int i, ddir;
@@ -2205,10 +2206,10 @@
printk("Done with %p\n", rq);
#endif /* CCISS_DEBUG */
- spin_lock_irq(&h->lock);
+ spin_lock_irqsave(&h->lock, flags);
end_that_request_last(rq, rq->errors);
cmd_free(h, cmd,1);
- spin_unlock_irq(&h->lock);
+ spin_unlock_irqrestore(&h->lock, flags);
}
/* checks the status of the job and calls complete buffers to mark all
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 93affee..4e7dbcc 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -43,8 +43,6 @@
*
*************************************************************************/
-#define VERSION_CODE "v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com"
-
#include <linux/pktcdvd.h>
#include <linux/config.h>
#include <linux/module.h>
@@ -131,7 +129,7 @@
/*
* Allocate a packet_data struct
*/
-static struct packet_data *pkt_alloc_packet_data(void)
+static struct packet_data *pkt_alloc_packet_data(int frames)
{
int i;
struct packet_data *pkt;
@@ -140,11 +138,12 @@
if (!pkt)
goto no_pkt;
- pkt->w_bio = pkt_bio_alloc(PACKET_MAX_SIZE);
+ pkt->frames = frames;
+ pkt->w_bio = pkt_bio_alloc(frames);
if (!pkt->w_bio)
goto no_bio;
- for (i = 0; i < PAGES_PER_PACKET; i++) {
+ for (i = 0; i < frames / FRAMES_PER_PAGE; i++) {
pkt->pages[i] = alloc_page(GFP_KERNEL|__GFP_ZERO);
if (!pkt->pages[i])
goto no_page;
@@ -152,7 +151,7 @@
spin_lock_init(&pkt->lock);
- for (i = 0; i < PACKET_MAX_SIZE; i++) {
+ for (i = 0; i < frames; i++) {
struct bio *bio = pkt_bio_alloc(1);
if (!bio)
goto no_rd_bio;
@@ -162,14 +161,14 @@
return pkt;
no_rd_bio:
- for (i = 0; i < PACKET_MAX_SIZE; i++) {
+ for (i = 0; i < frames; i++) {
struct bio *bio = pkt->r_bios[i];
if (bio)
bio_put(bio);
}
no_page:
- for (i = 0; i < PAGES_PER_PACKET; i++)
+ for (i = 0; i < frames / FRAMES_PER_PAGE; i++)
if (pkt->pages[i])
__free_page(pkt->pages[i]);
bio_put(pkt->w_bio);
@@ -186,12 +185,12 @@
{
int i;
- for (i = 0; i < PACKET_MAX_SIZE; i++) {
+ for (i = 0; i < pkt->frames; i++) {
struct bio *bio = pkt->r_bios[i];
if (bio)
bio_put(bio);
}
- for (i = 0; i < PAGES_PER_PACKET; i++)
+ for (i = 0; i < pkt->frames / FRAMES_PER_PAGE; i++)
__free_page(pkt->pages[i]);
bio_put(pkt->w_bio);
kfree(pkt);
@@ -206,17 +205,17 @@
list_for_each_entry_safe(pkt, next, &pd->cdrw.pkt_free_list, list) {
pkt_free_packet_data(pkt);
}
+ INIT_LIST_HEAD(&pd->cdrw.pkt_free_list);
}
static int pkt_grow_pktlist(struct pktcdvd_device *pd, int nr_packets)
{
struct packet_data *pkt;
- INIT_LIST_HEAD(&pd->cdrw.pkt_free_list);
- INIT_LIST_HEAD(&pd->cdrw.pkt_active_list);
- spin_lock_init(&pd->cdrw.active_list_lock);
+ BUG_ON(!list_empty(&pd->cdrw.pkt_free_list));
+
while (nr_packets > 0) {
- pkt = pkt_alloc_packet_data();
+ pkt = pkt_alloc_packet_data(pd->settings.size >> 2);
if (!pkt) {
pkt_shrink_pktlist(pd);
return 0;
@@ -951,7 +950,7 @@
pd->current_sector = zone + pd->settings.size;
pkt->sector = zone;
- pkt->frames = pd->settings.size >> 2;
+ BUG_ON(pkt->frames != pd->settings.size >> 2);
pkt->write_size = 0;
/*
@@ -1639,7 +1638,7 @@
pd->settings.size = be32_to_cpu(ti.fixed_packet_size) << 2;
if (pd->settings.size == 0) {
printk("pktcdvd: detected zero packet size!\n");
- pd->settings.size = 128;
+ return -ENXIO;
}
if (pd->settings.size > PACKET_MAX_SECTORS) {
printk("pktcdvd: packet size is too big\n");
@@ -1987,8 +1986,14 @@
if ((ret = pkt_set_segment_merging(pd, q)))
goto out_unclaim;
- if (write)
+ if (write) {
+ if (!pkt_grow_pktlist(pd, CONFIG_CDROM_PKTCDVD_BUFFERS)) {
+ printk("pktcdvd: not enough memory for buffers\n");
+ ret = -ENOMEM;
+ goto out_unclaim;
+ }
printk("pktcdvd: %lukB available on disc\n", lba << 1);
+ }
return 0;
@@ -2014,6 +2019,8 @@
pkt_set_speed(pd, MAX_SPEED, MAX_SPEED);
bd_release(pd->bdev);
blkdev_put(pd->bdev);
+
+ pkt_shrink_pktlist(pd);
}
static struct pktcdvd_device *pkt_find_dev_from_minor(int dev_minor)
@@ -2379,12 +2386,6 @@
/* This is safe, since we have a reference from open(). */
__module_get(THIS_MODULE);
- if (!pkt_grow_pktlist(pd, CONFIG_CDROM_PKTCDVD_BUFFERS)) {
- printk("pktcdvd: not enough memory for buffers\n");
- ret = -ENOMEM;
- goto out_mem;
- }
-
pd->bdev = bdev;
set_blocksize(bdev, CD_FRAMESIZE);
@@ -2395,7 +2396,7 @@
if (IS_ERR(pd->cdrw.thread)) {
printk("pktcdvd: can't start kernel thread\n");
ret = -ENOMEM;
- goto out_thread;
+ goto out_mem;
}
proc = create_proc_entry(pd->name, 0, pkt_proc);
@@ -2406,8 +2407,6 @@
DPRINTK("pktcdvd: writer %s mapped to %s\n", pd->name, bdevname(bdev, b));
return 0;
-out_thread:
- pkt_shrink_pktlist(pd);
out_mem:
blkdev_put(bdev);
/* This is safe: open() is still holding a reference. */
@@ -2503,6 +2502,10 @@
goto out_mem;
pd->disk = disk;
+ INIT_LIST_HEAD(&pd->cdrw.pkt_free_list);
+ INIT_LIST_HEAD(&pd->cdrw.pkt_active_list);
+ spin_lock_init(&pd->cdrw.active_list_lock);
+
spin_lock_init(&pd->lock);
spin_lock_init(&pd->iosched.lock);
sprintf(pd->name, "pktcdvd%d", idx);
@@ -2567,8 +2570,6 @@
blkdev_put(pd->bdev);
- pkt_shrink_pktlist(pd);
-
remove_proc_entry(pd->name, pkt_proc);
DPRINTK("pktcdvd: writer %s unmapped\n", pd->name);
@@ -2678,7 +2679,6 @@
pkt_proc = proc_mkdir("pktcdvd", proc_root_driver);
- DPRINTK("pktcdvd: %s\n", VERSION_CODE);
return 0;
out:
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index a05fe58..f04d864 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -14,7 +14,6 @@
* -- special case some senses, e.g. 3a/0 -> no media present, reduce retries
* -- verify the 13 conditions and do bulk resets
* -- kill last_pipe and simply do two-state clearing on both pipes
- * -- verify protocol (bulk) from USB descriptors (maybe...)
* -- highmem
* -- move top_sense and work_bcs into separate allocations (if they survive)
* for cache purists and esoteric architectures.
@@ -355,7 +354,7 @@
* The USB device instance.
*/
struct ub_dev {
- spinlock_t lock;
+ spinlock_t *lock;
atomic_t poison; /* The USB device is disconnected */
int openc; /* protected by ub_lock! */
/* kref is too implicit for our taste */
@@ -420,11 +419,13 @@
static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
int stalled_pipe);
static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd);
-static void ub_reset_enter(struct ub_dev *sc);
+static void ub_reset_enter(struct ub_dev *sc, int try);
static void ub_reset_task(void *arg);
static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun);
static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
struct ub_capacity *ret);
+static int ub_sync_reset(struct ub_dev *sc);
+static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe);
static int ub_probe_lun(struct ub_dev *sc, int lnum);
/*
@@ -452,6 +453,10 @@
#define UB_MAX_HOSTS 26
static char ub_hostv[UB_MAX_HOSTS];
+#define UB_QLOCK_NUM 5
+static spinlock_t ub_qlockv[UB_QLOCK_NUM];
+static int ub_qlock_next = 0;
+
static DEFINE_SPINLOCK(ub_lock); /* Locks globals and ->openc */
/*
@@ -531,7 +536,7 @@
return 0;
cnt = 0;
- spin_lock_irqsave(&sc->lock, flags);
+ spin_lock_irqsave(sc->lock, flags);
cnt += sprintf(page + cnt,
"poison %d reset %d\n",
@@ -579,7 +584,7 @@
if (++nc == SCMD_TRACE_SZ) nc = 0;
}
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_unlock_irqrestore(sc->lock, flags);
return cnt;
}
@@ -627,6 +632,24 @@
}
/*
+ * This is necessitated by the fact that blk_cleanup_queue does not
+ * necesserily destroy the queue. Instead, it may merely decrease q->refcnt.
+ * Since our blk_init_queue() passes a spinlock common with ub_dev,
+ * we have life time issues when ub_cleanup frees ub_dev.
+ */
+static spinlock_t *ub_next_lock(void)
+{
+ unsigned long flags;
+ spinlock_t *ret;
+
+ spin_lock_irqsave(&ub_lock, flags);
+ ret = &ub_qlockv[ub_qlock_next];
+ ub_qlock_next = (ub_qlock_next + 1) % UB_QLOCK_NUM;
+ spin_unlock_irqrestore(&ub_lock, flags);
+ return ret;
+}
+
+/*
* Downcount for deallocation. This rides on two assumptions:
* - once something is poisoned, its refcount cannot grow
* - opens cannot happen at this time (del_gendisk was done)
@@ -961,7 +984,7 @@
if (atomic_read(&sc->poison))
return -ENXIO;
- ub_reset_enter(sc);
+ ub_reset_enter(sc, urq->current_try);
if (urq->current_try >= 3)
return -EIO;
@@ -997,8 +1020,6 @@
* No exceptions.
*
* Host is assumed locked.
- *
- * XXX We only support Bulk for the moment.
*/
static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
{
@@ -1083,9 +1104,10 @@
struct ub_dev *sc = (struct ub_dev *) arg;
unsigned long flags;
- spin_lock_irqsave(&sc->lock, flags);
- usb_unlink_urb(&sc->work_urb);
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_lock_irqsave(sc->lock, flags);
+ if (!ub_is_completed(&sc->work_done))
+ usb_unlink_urb(&sc->work_urb);
+ spin_unlock_irqrestore(sc->lock, flags);
}
/*
@@ -1108,10 +1130,9 @@
struct ub_dev *sc = (struct ub_dev *) _dev;
unsigned long flags;
- spin_lock_irqsave(&sc->lock, flags);
- del_timer(&sc->work_timer);
+ spin_lock_irqsave(sc->lock, flags);
ub_scsi_dispatch(sc);
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_unlock_irqrestore(sc->lock, flags);
}
static void ub_scsi_dispatch(struct ub_dev *sc)
@@ -1133,6 +1154,7 @@
} else {
if (!ub_is_completed(&sc->work_done))
break;
+ del_timer(&sc->work_timer);
ub_scsi_urb_compl(sc, cmd);
}
}
@@ -1680,16 +1702,18 @@
/*
* Reset management
+ * XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing.
+ * XXX Make usb_sync_reset asynchronous.
*/
-static void ub_reset_enter(struct ub_dev *sc)
+static void ub_reset_enter(struct ub_dev *sc, int try)
{
if (sc->reset) {
/* This happens often on multi-LUN devices. */
return;
}
- sc->reset = 1;
+ sc->reset = try + 1;
#if 0 /* Not needed because the disconnect waits for us. */
unsigned long flags;
@@ -1727,6 +1751,11 @@
if (atomic_read(&sc->poison)) {
printk(KERN_NOTICE "%s: Not resetting disconnected device\n",
sc->name); /* P3 This floods. Remove soon. XXX */
+ } else if ((sc->reset & 1) == 0) {
+ ub_sync_reset(sc);
+ msleep(700); /* usb-storage sleeps 6s (!) */
+ ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
+ ub_probe_clear_stall(sc, sc->send_bulk_pipe);
} else if (sc->dev->actconfig->desc.bNumInterfaces != 1) {
printk(KERN_NOTICE "%s: Not resetting multi-interface device\n",
sc->name); /* P3 This floods. Remove soon. XXX */
@@ -1754,7 +1783,7 @@
* queues of resets or anything. We do need a spinlock though,
* to interact with block layer.
*/
- spin_lock_irqsave(&sc->lock, flags);
+ spin_lock_irqsave(sc->lock, flags);
sc->reset = 0;
tasklet_schedule(&sc->tasklet);
list_for_each(p, &sc->luns) {
@@ -1762,7 +1791,7 @@
blk_start_queue(lun->disk->queue);
}
wake_up(&sc->reset_wait);
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_unlock_irqrestore(sc->lock, flags);
}
/*
@@ -1990,11 +2019,11 @@
cmd->done = ub_probe_done;
cmd->back = &compl;
- spin_lock_irqsave(&sc->lock, flags);
+ spin_lock_irqsave(sc->lock, flags);
cmd->tag = sc->tagcnt++;
rc = ub_submit_scsi(sc, cmd);
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_unlock_irqrestore(sc->lock, flags);
if (rc != 0) {
printk("ub: testing ready: submit error (%d)\n", rc); /* P3 */
@@ -2052,11 +2081,11 @@
cmd->done = ub_probe_done;
cmd->back = &compl;
- spin_lock_irqsave(&sc->lock, flags);
+ spin_lock_irqsave(sc->lock, flags);
cmd->tag = sc->tagcnt++;
rc = ub_submit_scsi(sc, cmd);
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_unlock_irqrestore(sc->lock, flags);
if (rc != 0) {
printk("ub: reading capacity: submit error (%d)\n", rc); /* P3 */
@@ -2118,6 +2147,52 @@
}
/*
+ * Reset with a Bulk reset.
+ */
+static int ub_sync_reset(struct ub_dev *sc)
+{
+ int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
+ struct usb_ctrlrequest *cr;
+ struct completion compl;
+ struct timer_list timer;
+ int rc;
+
+ init_completion(&compl);
+
+ cr = &sc->work_cr;
+ cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+ cr->bRequest = US_BULK_RESET_REQUEST;
+ cr->wValue = cpu_to_le16(0);
+ cr->wIndex = cpu_to_le16(ifnum);
+ cr->wLength = cpu_to_le16(0);
+
+ usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
+ (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
+ sc->work_urb.actual_length = 0;
+ sc->work_urb.error_count = 0;
+ sc->work_urb.status = 0;
+
+ if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
+ printk(KERN_WARNING
+ "%s: Unable to submit a bulk reset (%d)\n", sc->name, rc);
+ return rc;
+ }
+
+ init_timer(&timer);
+ timer.function = ub_probe_timeout;
+ timer.data = (unsigned long) &compl;
+ timer.expires = jiffies + UB_CTRL_TIMEOUT;
+ add_timer(&timer);
+
+ wait_for_completion(&compl);
+
+ del_timer_sync(&timer);
+ usb_kill_urb(&sc->work_urb);
+
+ return sc->work_urb.status;
+}
+
+/*
* Get number of LUNs by the way of Bulk GetMaxLUN command.
*/
static int ub_sync_getmaxlun(struct ub_dev *sc)
@@ -2333,7 +2408,7 @@
if ((sc = kmalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL)
goto err_core;
memset(sc, 0, sizeof(struct ub_dev));
- spin_lock_init(&sc->lock);
+ sc->lock = ub_next_lock();
INIT_LIST_HEAD(&sc->luns);
usb_init_urb(&sc->work_urb);
tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc);
@@ -2483,7 +2558,7 @@
disk->driverfs_dev = &sc->intf->dev;
rc = -ENOMEM;
- if ((q = blk_init_queue(ub_request_fn, &sc->lock)) == NULL)
+ if ((q = blk_init_queue(ub_request_fn, sc->lock)) == NULL)
goto err_blkqinit;
disk->queue = q;
@@ -2554,7 +2629,7 @@
* and the whole queue drains. So, we just use this code to
* print warnings.
*/
- spin_lock_irqsave(&sc->lock, flags);
+ spin_lock_irqsave(sc->lock, flags);
{
struct ub_scsi_cmd *cmd;
int cnt = 0;
@@ -2571,7 +2646,7 @@
"%d was queued after shutdown\n", sc->name, cnt);
}
}
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_unlock_irqrestore(sc->lock, flags);
/*
* Unregister the upper layer.
@@ -2590,19 +2665,15 @@
}
/*
- * Taking a lock on a structure which is about to be freed
- * is very nonsensual. Here it is largely a way to do a debug freeze,
- * and a bracket which shows where the nonsensual code segment ends.
- *
* Testing for -EINPROGRESS is always a bug, so we are bending
* the rules a little.
*/
- spin_lock_irqsave(&sc->lock, flags);
+ spin_lock_irqsave(sc->lock, flags);
if (sc->work_urb.status == -EINPROGRESS) { /* janitors: ignore */
printk(KERN_WARNING "%s: "
"URB is active after disconnect\n", sc->name);
}
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_unlock_irqrestore(sc->lock, flags);
/*
* There is virtually no chance that other CPU runs times so long
@@ -2636,6 +2707,10 @@
static int __init ub_init(void)
{
int rc;
+ int i;
+
+ for (i = 0; i < UB_QLOCK_NUM; i++)
+ spin_lock_init(&ub_qlockv[i]);
if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
goto err_regblkdev;
diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index a3614e6..4ada126 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -882,7 +882,7 @@
card->card_number, dev->bus->number, dev->devfn);
if (pci_set_dma_mask(dev, 0xffffffffffffffffLL) &&
- !pci_set_dma_mask(dev, 0xffffffffLL)) {
+ pci_set_dma_mask(dev, 0xffffffffLL)) {
printk(KERN_WARNING "MM%d: NO suitable DMA found\n",num_cards);
return -ENOMEM;
}
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 193446e..e276172 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -42,8 +42,6 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#include <asm/bug.h>
-
#include <asm/vio.h>
#include <asm/scatterlist.h>
#include <asm/iseries/hv_types.h>
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 4135d8c..05ba410 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -222,7 +222,7 @@
config SYNCLINK_GT
tristate "SyncLink GT/AC support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && PCI
help
Support for SyncLink GT and SyncLink AC families of
synchronous and asynchronous serial adapters
@@ -992,7 +992,7 @@
config HANGCHECK_TIMER
tristate "Hangcheck timer"
- depends on X86 || IA64 || PPC64 || S390
+ depends on X86 || IA64 || PPC64
help
The hangcheck-timer module detects when the system has gone
out to lunch past a certain margin. It can reboot the system
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 810679d..9964c50 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -600,6 +600,26 @@
agp_put_bridge(bridge);
}
+#ifdef CONFIG_PM
+
+static int agp_amd64_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+static int agp_amd64_resume(struct pci_dev *pdev)
+{
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ return amd_8151_configure();
+}
+
+#endif /* CONFIG_PM */
+
static struct pci_device_id agp_amd64_pci_table[] = {
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
@@ -718,6 +738,10 @@
.id_table = agp_amd64_pci_table,
.probe = agp_amd64_probe,
.remove = agp_amd64_remove,
+#ifdef CONFIG_PM
+ .suspend = agp_amd64_suspend,
+ .resume = agp_amd64_resume,
+#endif
};
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index 53372a8..5b74c36 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -244,6 +244,22 @@
}
+#ifdef CONFIG_PM
+static int agp_ati_resume(struct pci_dev *dev)
+{
+ pci_restore_state(dev);
+
+ return ati_configure();
+}
+
+static int agp_ati_suspend(struct pci_dev *dev, pm_message_t state)
+{
+ pci_save_state(dev);
+
+ return 0;
+}
+#endif
+
/*
*Since we don't need contigious memory we just try
* to get the gatt table once
@@ -525,6 +541,10 @@
.id_table = agp_ati_pci_table,
.probe = agp_ati_probe,
.remove = agp_ati_remove,
+#ifdef CONFIG_PM
+ .resume = agp_ati_resume,
+ .suspend = agp_ati_suspend,
+#endif
};
static int __init agp_ati_init(void)
diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c
index 17f520c..97eeb23 100644
--- a/drivers/char/agp/frontend.c
+++ b/drivers/char/agp/frontend.c
@@ -592,7 +592,7 @@
struct agp_file_private *priv = file->private_data;
struct agp_kern_info kerninfo;
- down(&(agp_fe.agp_mutex));
+ mutex_lock(&(agp_fe.agp_mutex));
if (agp_fe.backend_acquired != TRUE)
goto out_eperm;
@@ -627,7 +627,7 @@
size, vma->vm_page_prot)) {
goto out_again;
}
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return 0;
}
@@ -643,20 +643,20 @@
size, vma->vm_page_prot)) {
goto out_again;
}
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return 0;
}
out_eperm:
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return -EPERM;
out_inval:
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return -EINVAL;
out_again:
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return -EAGAIN;
}
@@ -664,7 +664,7 @@
{
struct agp_file_private *priv = file->private_data;
- down(&(agp_fe.agp_mutex));
+ mutex_lock(&(agp_fe.agp_mutex));
DBG("priv=%p", priv);
@@ -687,7 +687,7 @@
agp_remove_file_private(priv);
kfree(priv);
file->private_data = NULL;
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return 0;
}
@@ -698,7 +698,7 @@
struct agp_client *client;
int rc = -ENXIO;
- down(&(agp_fe.agp_mutex));
+ mutex_lock(&(agp_fe.agp_mutex));
if (minor != AGPGART_MINOR)
goto err_out;
@@ -723,13 +723,13 @@
file->private_data = (void *) priv;
agp_insert_file_private(priv);
DBG("private=%p, client=%p", priv, client);
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return 0;
err_out_nomem:
rc = -ENOMEM;
err_out:
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return rc;
}
@@ -985,7 +985,7 @@
int ret_val = -ENOTTY;
DBG("priv=%p, cmd=%x", curr_priv, cmd);
- down(&(agp_fe.agp_mutex));
+ mutex_lock(&(agp_fe.agp_mutex));
if ((agp_fe.current_controller == NULL) &&
(cmd != AGPIOC_ACQUIRE)) {
@@ -1055,7 +1055,7 @@
ioctl_out:
DBG("ioctl returns %d\n", ret_val);
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return ret_val;
}
@@ -1081,7 +1081,7 @@
int agp_frontend_initialize(void)
{
memset(&agp_fe, 0, sizeof(struct agp_front_data));
- sema_init(&(agp_fe.agp_mutex), 1);
+ mutex_init(&(agp_fe.agp_mutex));
if (misc_register(&agp_miscdev)) {
printk(KERN_ERR PFX "unable to get minor: %d\n", AGPGART_MINOR);
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index e7bed50..631531f 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -422,7 +422,8 @@
/* Check it's really I915G */
if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB ||
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB ||
- agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB)
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB ||
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945GM_HB)
gtt_entries = MB(48) - KB(size);
else
gtt_entries = 0;
@@ -431,7 +432,8 @@
/* Check it's really I915G */
if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB ||
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB ||
- agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB)
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB ||
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945GM_HB)
gtt_entries = MB(64) - KB(size);
else
gtt_entries = 0;
@@ -1681,6 +1683,14 @@
}
name = "945G";
break;
+ case PCI_DEVICE_ID_INTEL_82945GM_HB:
+ if (find_i830(PCI_DEVICE_ID_INTEL_82945GM_IG)) {
+ bridge->driver = &intel_915_driver;
+ } else {
+ bridge->driver = &intel_845_driver;
+ }
+ name = "945GM";
+ break;
case PCI_DEVICE_ID_INTEL_7505_0:
bridge->driver = &intel_7505_driver;
name = "E7505";
@@ -1821,6 +1831,7 @@
ID(PCI_DEVICE_ID_INTEL_82915G_HB),
ID(PCI_DEVICE_ID_INTEL_82915GM_HB),
ID(PCI_DEVICE_ID_INTEL_82945G_HB),
+ ID(PCI_DEVICE_ID_INTEL_82945GM_HB),
{ }
};
diff --git a/drivers/char/agp/isoch.c b/drivers/char/agp/isoch.c
index 4008324..7c14a09 100644
--- a/drivers/char/agp/isoch.c
+++ b/drivers/char/agp/isoch.c
@@ -218,10 +218,8 @@
master[cdev].rq *= (1 << (master[cdev].y - 1));
tot_rq += master[cdev].rq;
-
- if (cdev == ndevs-1)
- master[cdev].n += rem;
}
+ master[ndevs-1].n += rem;
/* Figure the number of isochronous and asynchronous RQ slots the
* target is providing. */
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 39c61a7..cc7acf8 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -1233,7 +1233,7 @@
}
info->idle_stats.recv_idle = jiffies;
}
- schedule_delayed_work(&tty->buf.work, 1);
+ tty_schedule_flip(tty);
}
/* end of service */
cy_writeb(base_addr+(CyRIR<<index), (save_xir & 0x3f));
@@ -1606,7 +1606,7 @@
}
#endif
info->idle_stats.recv_idle = jiffies;
- schedule_delayed_work(&tty->buf.work, 1);
+ tty_schedule_flip(tty);
}
/* Update rx_get */
cy_writel(&buf_ctrl->rx_get, new_rx_get);
@@ -1809,7 +1809,7 @@
if(delta_count)
cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP);
if(special_count)
- schedule_delayed_work(&tty->buf.work, 1);
+ tty_schedule_flip(tty);
}
}
diff --git a/drivers/char/drm/ati_pcigart.c b/drivers/char/drm/ati_pcigart.c
index 5485382..bd7be09 100644
--- a/drivers/char/drm/ati_pcigart.c
+++ b/drivers/char/drm/ati_pcigart.c
@@ -59,17 +59,16 @@
int i;
DRM_DEBUG("%s\n", __FUNCTION__);
- address = __get_free_pages(GFP_KERNEL, ATI_PCIGART_TABLE_ORDER);
+ address = __get_free_pages(GFP_KERNEL | __GFP_COMP,
+ ATI_PCIGART_TABLE_ORDER);
if (address == 0UL) {
- return 0;
+ return NULL;
}
page = virt_to_page(address);
- for (i = 0; i < ATI_PCIGART_TABLE_PAGES; i++, page++) {
- get_page(page);
+ for (i = 0; i < ATI_PCIGART_TABLE_PAGES; i++, page++)
SetPageReserved(page);
- }
DRM_DEBUG("%s: returning 0x%08lx\n", __FUNCTION__, address);
return (void *)address;
@@ -83,10 +82,8 @@
page = virt_to_page((unsigned long)address);
- for (i = 0; i < ATI_PCIGART_TABLE_PAGES; i++, page++) {
- __put_page(page);
+ for (i = 0; i < ATI_PCIGART_TABLE_PAGES; i++, page++)
ClearPageReserved(page);
- }
free_pages((unsigned long)address, ATI_PCIGART_TABLE_ORDER);
}
@@ -127,7 +124,7 @@
if (gart_info->gart_table_location == DRM_ATI_GART_MAIN
&& gart_info->addr) {
drm_ati_free_pcigart_table(gart_info->addr);
- gart_info->addr = 0;
+ gart_info->addr = NULL;
}
return 1;
@@ -168,7 +165,7 @@
if (bus_address == 0) {
DRM_ERROR("unable to map PCIGART pages!\n");
drm_ati_free_pcigart_table(address);
- address = 0;
+ address = NULL;
goto done;
}
} else {
diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h
index 54b561e..107df9f 100644
--- a/drivers/char/drm/drmP.h
+++ b/drivers/char/drm/drmP.h
@@ -57,6 +57,7 @@
#include <linux/smp_lock.h> /* For (un)lock_kernel */
#include <linux/mm.h>
#include <linux/cdev.h>
+#include <linux/mutex.h>
#if defined(__alpha__) || defined(__powerpc__)
#include <asm/pgtable.h> /* For pte_wrprotect */
#endif
@@ -623,7 +624,7 @@
/** \name Locks */
/*@{ */
spinlock_t count_lock; /**< For inuse, drm_device::open_count, drm_device::buf_use */
- struct semaphore struct_sem; /**< For others */
+ struct mutex struct_mutex; /**< For others */
/*@} */
/** \name Usage Counters */
@@ -658,7 +659,7 @@
/*@{ */
drm_ctx_list_t *ctxlist; /**< Linked list of context handles */
int ctx_count; /**< Number of context handles */
- struct semaphore ctxlist_sem; /**< For ctxlist */
+ struct mutex ctxlist_mutex; /**< For ctxlist */
drm_map_t **context_sareas; /**< per-context SAREA's */
int max_context;
@@ -979,7 +980,7 @@
extern unsigned int drm_debug;
extern unsigned int drm_cards_limit;
extern drm_head_t **drm_heads;
-extern struct drm_sysfs_class *drm_class;
+extern struct class *drm_class;
extern struct proc_dir_entry *drm_proc_root;
/* Proc support (drm_proc.h) */
@@ -1010,11 +1011,9 @@
extern void drm_pci_free(drm_device_t * dev, drm_dma_handle_t * dmah);
/* sysfs support (drm_sysfs.c) */
-struct drm_sysfs_class;
-extern struct drm_sysfs_class *drm_sysfs_create(struct module *owner,
- char *name);
-extern void drm_sysfs_destroy(struct drm_sysfs_class *cs);
-extern struct class_device *drm_sysfs_device_add(struct drm_sysfs_class *cs,
+extern struct class *drm_sysfs_create(struct module *owner, char *name);
+extern void drm_sysfs_destroy(struct class *cs);
+extern struct class_device *drm_sysfs_device_add(struct class *cs,
drm_head_t *head);
extern void drm_sysfs_device_remove(struct class_device *class_dev);
diff --git a/drivers/char/drm/drm_auth.c b/drivers/char/drm/drm_auth.c
index a47b502..2a37586 100644
--- a/drivers/char/drm/drm_auth.c
+++ b/drivers/char/drm/drm_auth.c
@@ -56,7 +56,7 @@
* \param magic magic number.
*
* Searches in drm_device::magiclist within all files with the same hash key
- * the one with matching magic number, while holding the drm_device::struct_sem
+ * the one with matching magic number, while holding the drm_device::struct_mutex
* lock.
*/
static drm_file_t *drm_find_file(drm_device_t * dev, drm_magic_t magic)
@@ -65,14 +65,14 @@
drm_magic_entry_t *pt;
int hash = drm_hash_magic(magic);
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
for (pt = dev->magiclist[hash].head; pt; pt = pt->next) {
if (pt->magic == magic) {
retval = pt->priv;
break;
}
}
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return retval;
}
@@ -85,7 +85,7 @@
*
* Creates a drm_magic_entry structure and appends to the linked list
* associated the magic number hash key in drm_device::magiclist, while holding
- * the drm_device::struct_sem lock.
+ * the drm_device::struct_mutex lock.
*/
static int drm_add_magic(drm_device_t * dev, drm_file_t * priv,
drm_magic_t magic)
@@ -104,7 +104,7 @@
entry->priv = priv;
entry->next = NULL;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
if (dev->magiclist[hash].tail) {
dev->magiclist[hash].tail->next = entry;
dev->magiclist[hash].tail = entry;
@@ -112,7 +112,7 @@
dev->magiclist[hash].head = entry;
dev->magiclist[hash].tail = entry;
}
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return 0;
}
@@ -124,7 +124,7 @@
* \param magic magic number.
*
* Searches and unlinks the entry in drm_device::magiclist with the magic
- * number hash key, while holding the drm_device::struct_sem lock.
+ * number hash key, while holding the drm_device::struct_mutex lock.
*/
static int drm_remove_magic(drm_device_t * dev, drm_magic_t magic)
{
@@ -135,7 +135,7 @@
DRM_DEBUG("%d\n", magic);
hash = drm_hash_magic(magic);
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
for (pt = dev->magiclist[hash].head; pt; prev = pt, pt = pt->next) {
if (pt->magic == magic) {
if (dev->magiclist[hash].head == pt) {
@@ -147,11 +147,11 @@
if (prev) {
prev->next = pt->next;
}
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return 0;
}
}
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
drm_free(pt, sizeof(*pt), DRM_MEM_MAGIC);
diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c
index 1db12dc..e2637b4 100644
--- a/drivers/char/drm/drm_bufs.c
+++ b/drivers/char/drm/drm_bufs.c
@@ -255,14 +255,14 @@
memset(list, 0, sizeof(*list));
list->map = map;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
list_add(&list->head, &dev->maplist->head);
/* Assign a 32-bit handle */
- /* We do it here so that dev->struct_sem protects the increment */
+ /* We do it here so that dev->struct_mutex protects the increment */
list->user_token = HandleID(map->type == _DRM_SHM
? (unsigned long)map->handle
: map->offset, dev);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
*maplist = list;
return 0;
@@ -392,9 +392,9 @@
{
int ret;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
ret = drm_rmmap_locked(dev, map);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return ret;
}
@@ -423,7 +423,7 @@
return -EFAULT;
}
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
list_for_each(list, &dev->maplist->head) {
drm_map_list_t *r_list = list_entry(list, drm_map_list_t, head);
@@ -439,7 +439,7 @@
* find anything.
*/
if (list == (&dev->maplist->head)) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
@@ -448,13 +448,13 @@
/* Register and framebuffer maps are permanent */
if ((map->type == _DRM_REGISTERS) || (map->type == _DRM_FRAME_BUFFER)) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return 0;
}
ret = drm_rmmap_locked(dev, map);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return ret;
}
@@ -566,16 +566,16 @@
atomic_inc(&dev->buf_alloc);
spin_unlock(&dev->count_lock);
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
entry = &dma->bufs[order];
if (entry->buf_count) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM; /* May only call once for each order */
}
if (count < 0 || count > 4096) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -EINVAL;
}
@@ -583,7 +583,7 @@
entry->buflist = drm_alloc(count * sizeof(*entry->buflist),
DRM_MEM_BUFS);
if (!entry->buflist) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -616,7 +616,7 @@
/* Set count correctly so we free the proper amount. */
entry->buf_count = count;
drm_cleanup_buf_error(dev, entry);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -638,7 +638,7 @@
if (!temp_buflist) {
/* Free the entry because it isn't valid */
drm_cleanup_buf_error(dev, entry);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -656,7 +656,7 @@
DRM_DEBUG("dma->buf_count : %d\n", dma->buf_count);
DRM_DEBUG("entry->buf_count : %d\n", entry->buf_count);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
request->count = entry->buf_count;
request->size = size;
@@ -722,16 +722,16 @@
atomic_inc(&dev->buf_alloc);
spin_unlock(&dev->count_lock);
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
entry = &dma->bufs[order];
if (entry->buf_count) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM; /* May only call once for each order */
}
if (count < 0 || count > 4096) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -EINVAL;
}
@@ -739,7 +739,7 @@
entry->buflist = drm_alloc(count * sizeof(*entry->buflist),
DRM_MEM_BUFS);
if (!entry->buflist) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -750,7 +750,7 @@
if (!entry->seglist) {
drm_free(entry->buflist,
count * sizeof(*entry->buflist), DRM_MEM_BUFS);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -766,7 +766,7 @@
count * sizeof(*entry->buflist), DRM_MEM_BUFS);
drm_free(entry->seglist,
count * sizeof(*entry->seglist), DRM_MEM_SEGS);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -790,7 +790,7 @@
drm_free(temp_pagelist,
(dma->page_count + (count << page_order))
* sizeof(*dma->pagelist), DRM_MEM_PAGES);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -831,7 +831,7 @@
(count << page_order))
* sizeof(*dma->pagelist),
DRM_MEM_PAGES);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -853,7 +853,7 @@
drm_free(temp_pagelist,
(dma->page_count + (count << page_order))
* sizeof(*dma->pagelist), DRM_MEM_PAGES);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -878,7 +878,7 @@
dma->page_count += entry->seg_count << page_order;
dma->byte_count += PAGE_SIZE * (entry->seg_count << page_order);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
request->count = entry->buf_count;
request->size = size;
@@ -948,16 +948,16 @@
atomic_inc(&dev->buf_alloc);
spin_unlock(&dev->count_lock);
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
entry = &dma->bufs[order];
if (entry->buf_count) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM; /* May only call once for each order */
}
if (count < 0 || count > 4096) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -EINVAL;
}
@@ -965,7 +965,7 @@
entry->buflist = drm_alloc(count * sizeof(*entry->buflist),
DRM_MEM_BUFS);
if (!entry->buflist) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -999,7 +999,7 @@
/* Set count correctly so we free the proper amount. */
entry->buf_count = count;
drm_cleanup_buf_error(dev, entry);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -1022,7 +1022,7 @@
if (!temp_buflist) {
/* Free the entry because it isn't valid */
drm_cleanup_buf_error(dev, entry);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -1040,7 +1040,7 @@
DRM_DEBUG("dma->buf_count : %d\n", dma->buf_count);
DRM_DEBUG("entry->buf_count : %d\n", entry->buf_count);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
request->count = entry->buf_count;
request->size = size;
@@ -1110,16 +1110,16 @@
atomic_inc(&dev->buf_alloc);
spin_unlock(&dev->count_lock);
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
entry = &dma->bufs[order];
if (entry->buf_count) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM; /* May only call once for each order */
}
if (count < 0 || count > 4096) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -EINVAL;
}
@@ -1127,7 +1127,7 @@
entry->buflist = drm_alloc(count * sizeof(*entry->buflist),
DRM_MEM_BUFS);
if (!entry->buflist) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -1160,7 +1160,7 @@
/* Set count correctly so we free the proper amount. */
entry->buf_count = count;
drm_cleanup_buf_error(dev, entry);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -1182,7 +1182,7 @@
if (!temp_buflist) {
/* Free the entry because it isn't valid */
drm_cleanup_buf_error(dev, entry);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
@@ -1200,7 +1200,7 @@
DRM_DEBUG("dma->buf_count : %d\n", dma->buf_count);
DRM_DEBUG("entry->buf_count : %d\n", entry->buf_count);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
request->count = entry->buf_count;
request->size = size;
diff --git a/drivers/char/drm/drm_context.c b/drivers/char/drm/drm_context.c
index f842545..83094c7 100644
--- a/drivers/char/drm/drm_context.c
+++ b/drivers/char/drm/drm_context.c
@@ -53,7 +53,7 @@
* \param ctx_handle context handle.
*
* Clears the bit specified by \p ctx_handle in drm_device::ctx_bitmap and the entry
- * in drm_device::context_sareas, while holding the drm_device::struct_sem
+ * in drm_device::context_sareas, while holding the drm_device::struct_mutex
* lock.
*/
void drm_ctxbitmap_free(drm_device_t * dev, int ctx_handle)
@@ -64,10 +64,10 @@
goto failed;
if (ctx_handle < DRM_MAX_CTXBITMAP) {
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
clear_bit(ctx_handle, dev->ctx_bitmap);
dev->context_sareas[ctx_handle] = NULL;
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return;
}
failed:
@@ -83,7 +83,7 @@
*
* Find the first zero bit in drm_device::ctx_bitmap and (re)allocates
* drm_device::context_sareas to accommodate the new entry while holding the
- * drm_device::struct_sem lock.
+ * drm_device::struct_mutex lock.
*/
static int drm_ctxbitmap_next(drm_device_t * dev)
{
@@ -92,7 +92,7 @@
if (!dev->ctx_bitmap)
return -1;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
bit = find_first_zero_bit(dev->ctx_bitmap, DRM_MAX_CTXBITMAP);
if (bit < DRM_MAX_CTXBITMAP) {
set_bit(bit, dev->ctx_bitmap);
@@ -113,7 +113,7 @@
DRM_MEM_MAPS);
if (!ctx_sareas) {
clear_bit(bit, dev->ctx_bitmap);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return -1;
}
dev->context_sareas = ctx_sareas;
@@ -126,16 +126,16 @@
DRM_MEM_MAPS);
if (!dev->context_sareas) {
clear_bit(bit, dev->ctx_bitmap);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return -1;
}
dev->context_sareas[bit] = NULL;
}
}
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return bit;
}
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return -1;
}
@@ -145,24 +145,24 @@
* \param dev DRM device.
*
* Allocates and initialize drm_device::ctx_bitmap and drm_device::context_sareas, while holding
- * the drm_device::struct_sem lock.
+ * the drm_device::struct_mutex lock.
*/
int drm_ctxbitmap_init(drm_device_t * dev)
{
int i;
int temp;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
dev->ctx_bitmap = (unsigned long *)drm_alloc(PAGE_SIZE,
DRM_MEM_CTXBITMAP);
if (dev->ctx_bitmap == NULL) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return -ENOMEM;
}
memset((void *)dev->ctx_bitmap, 0, PAGE_SIZE);
dev->context_sareas = NULL;
dev->max_context = -1;
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
for (i = 0; i < DRM_RESERVED_CONTEXTS; i++) {
temp = drm_ctxbitmap_next(dev);
@@ -178,17 +178,17 @@
* \param dev DRM device.
*
* Frees drm_device::ctx_bitmap and drm_device::context_sareas, while holding
- * the drm_device::struct_sem lock.
+ * the drm_device::struct_mutex lock.
*/
void drm_ctxbitmap_cleanup(drm_device_t * dev)
{
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
if (dev->context_sareas)
drm_free(dev->context_sareas,
sizeof(*dev->context_sareas) *
dev->max_context, DRM_MEM_MAPS);
drm_free((void *)dev->ctx_bitmap, PAGE_SIZE, DRM_MEM_CTXBITMAP);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
}
/*@}*/
@@ -222,15 +222,15 @@
if (copy_from_user(&request, argp, sizeof(request)))
return -EFAULT;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
if (dev->max_context < 0
|| request.ctx_id >= (unsigned)dev->max_context) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
map = dev->context_sareas[request.ctx_id];
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
request.handle = NULL;
list_for_each_entry(_entry, &dev->maplist->head, head) {
@@ -274,7 +274,7 @@
(drm_ctx_priv_map_t __user *) arg, sizeof(request)))
return -EFAULT;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
list_for_each(list, &dev->maplist->head) {
r_list = list_entry(list, drm_map_list_t, head);
if (r_list->map
@@ -282,7 +282,7 @@
goto found;
}
bad:
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return -EINVAL;
found:
@@ -294,7 +294,7 @@
if (request.ctx_id >= (unsigned)dev->max_context)
goto bad;
dev->context_sareas[request.ctx_id] = map;
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return 0;
}
@@ -448,10 +448,10 @@
ctx_entry->handle = ctx.handle;
ctx_entry->tag = priv;
- down(&dev->ctxlist_sem);
+ mutex_lock(&dev->ctxlist_mutex);
list_add(&ctx_entry->head, &dev->ctxlist->head);
++dev->ctx_count;
- up(&dev->ctxlist_sem);
+ mutex_unlock(&dev->ctxlist_mutex);
if (copy_to_user(argp, &ctx, sizeof(ctx)))
return -EFAULT;
@@ -574,7 +574,7 @@
drm_ctxbitmap_free(dev, ctx.handle);
}
- down(&dev->ctxlist_sem);
+ mutex_lock(&dev->ctxlist_mutex);
if (!list_empty(&dev->ctxlist->head)) {
drm_ctx_list_t *pos, *n;
@@ -586,7 +586,7 @@
}
}
}
- up(&dev->ctxlist_sem);
+ mutex_unlock(&dev->ctxlist_mutex);
return 0;
}
diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c
index c4fa5a2..dc6bbe8 100644
--- a/drivers/char/drm/drm_drv.c
+++ b/drivers/char/drm/drm_drv.c
@@ -151,7 +151,7 @@
if (dev->irq_enabled)
drm_irq_uninstall(dev);
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
del_timer(&dev->timer);
/* Clear pid list */
@@ -231,7 +231,7 @@
dev->lock.filp = NULL;
wake_up_interruptible(&dev->lock.lock_queue);
}
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
DRM_DEBUG("lastclose completed\n");
return 0;
diff --git a/drivers/char/drm/drm_fops.c b/drivers/char/drm/drm_fops.c
index 403f44a..641f763 100644
--- a/drivers/char/drm/drm_fops.c
+++ b/drivers/char/drm/drm_fops.c
@@ -262,7 +262,7 @@
goto out_free;
}
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
if (!dev->file_last) {
priv->next = NULL;
priv->prev = NULL;
@@ -276,7 +276,7 @@
dev->file_last->next = priv;
dev->file_last = priv;
}
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
#ifdef __alpha__
/*
@@ -413,7 +413,7 @@
drm_fasync(-1, filp, 0);
- down(&dev->ctxlist_sem);
+ mutex_lock(&dev->ctxlist_mutex);
if (dev->ctxlist && (!list_empty(&dev->ctxlist->head))) {
drm_ctx_list_t *pos, *n;
@@ -432,9 +432,9 @@
}
}
}
- up(&dev->ctxlist_sem);
+ mutex_unlock(&dev->ctxlist_mutex);
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
if (priv->remove_auth_on_close == 1) {
drm_file_t *temp = dev->file_first;
while (temp) {
@@ -452,7 +452,7 @@
} else {
dev->file_last = priv->prev;
}
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
if (dev->driver->postclose)
dev->driver->postclose(dev, priv);
diff --git a/drivers/char/drm/drm_ioctl.c b/drivers/char/drm/drm_ioctl.c
index bcd4e60..555f323 100644
--- a/drivers/char/drm/drm_ioctl.c
+++ b/drivers/char/drm/drm_ioctl.c
@@ -194,9 +194,9 @@
return -EFAULT;
idx = map.offset;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
if (idx < 0) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
@@ -209,7 +209,7 @@
i++;
}
if (!r_list || !r_list->map) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
@@ -219,7 +219,7 @@
map.flags = r_list->map->flags;
map.handle = (void *)(unsigned long)r_list->user_token;
map.mtrr = r_list->map->mtrr;
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
if (copy_to_user(argp, &map, sizeof(map)))
return -EFAULT;
@@ -253,11 +253,11 @@
if (copy_from_user(&client, argp, sizeof(client)))
return -EFAULT;
idx = client.idx;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
for (i = 0, pt = dev->file_first; i < idx && pt; i++, pt = pt->next) ;
if (!pt) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
client.auth = pt->authenticated;
@@ -265,7 +265,7 @@
client.uid = pt->uid;
client.magic = pt->magic;
client.iocs = pt->ioctl_count;
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
if (copy_to_user(argp, &client, sizeof(client)))
return -EFAULT;
@@ -292,7 +292,7 @@
memset(&stats, 0, sizeof(stats));
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
for (i = 0; i < dev->counters; i++) {
if (dev->types[i] == _DRM_STAT_LOCK)
@@ -305,7 +305,7 @@
stats.count = dev->counters;
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
if (copy_to_user((drm_stats_t __user *) arg, &stats, sizeof(stats)))
return -EFAULT;
diff --git a/drivers/char/drm/drm_irq.c b/drivers/char/drm/drm_irq.c
index b0d4b23..611a117 100644
--- a/drivers/char/drm/drm_irq.c
+++ b/drivers/char/drm/drm_irq.c
@@ -98,20 +98,20 @@
if (dev->irq == 0)
return -EINVAL;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
/* Driver must have been initialized */
if (!dev->dev_private) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
if (dev->irq_enabled) {
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return -EBUSY;
}
dev->irq_enabled = 1;
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
DRM_DEBUG("%s: irq=%d\n", __FUNCTION__, dev->irq);
@@ -135,9 +135,9 @@
ret = request_irq(dev->irq, dev->driver->irq_handler,
sh_flags, dev->devname, dev);
if (ret < 0) {
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
dev->irq_enabled = 0;
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return ret;
}
@@ -161,10 +161,10 @@
if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
return -EINVAL;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
irq_enabled = dev->irq_enabled;
dev->irq_enabled = 0;
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
if (!irq_enabled)
return -EINVAL;
diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h
index 5b1d3a0..8fd6357 100644
--- a/drivers/char/drm/drm_pciids.h
+++ b/drivers/char/drm/drm_pciids.h
@@ -3,6 +3,7 @@
Please contact dri-devel@lists.sf.net to add new cards to this list
*/
#define radeon_PCI_IDS \
+ {0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350},\
{0x1002, 0x4136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS100|CHIP_IS_IGP}, \
{0x1002, 0x4137, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|CHIP_IS_IGP}, \
{0x1002, 0x4144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
@@ -242,5 +243,6 @@
{0x8086, 0x2582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x2592, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x27a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0, 0, 0}
diff --git a/drivers/char/drm/drm_proc.c b/drivers/char/drm/drm_proc.c
index 6f943e3..362a270 100644
--- a/drivers/char/drm/drm_proc.c
+++ b/drivers/char/drm/drm_proc.c
@@ -258,7 +258,7 @@
}
/**
- * Simply calls _vm_info() while holding the drm_device::struct_sem lock.
+ * Simply calls _vm_info() while holding the drm_device::struct_mutex lock.
*/
static int drm_vm_info(char *buf, char **start, off_t offset, int request,
int *eof, void *data)
@@ -266,9 +266,9 @@
drm_device_t *dev = (drm_device_t *) data;
int ret;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
ret = drm__vm_info(buf, start, offset, request, eof, data);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return ret;
}
@@ -331,7 +331,7 @@
}
/**
- * Simply calls _queues_info() while holding the drm_device::struct_sem lock.
+ * Simply calls _queues_info() while holding the drm_device::struct_mutex lock.
*/
static int drm_queues_info(char *buf, char **start, off_t offset, int request,
int *eof, void *data)
@@ -339,9 +339,9 @@
drm_device_t *dev = (drm_device_t *) data;
int ret;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
ret = drm__queues_info(buf, start, offset, request, eof, data);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return ret;
}
@@ -403,7 +403,7 @@
}
/**
- * Simply calls _bufs_info() while holding the drm_device::struct_sem lock.
+ * Simply calls _bufs_info() while holding the drm_device::struct_mutex lock.
*/
static int drm_bufs_info(char *buf, char **start, off_t offset, int request,
int *eof, void *data)
@@ -411,9 +411,9 @@
drm_device_t *dev = (drm_device_t *) data;
int ret;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
ret = drm__bufs_info(buf, start, offset, request, eof, data);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return ret;
}
@@ -459,7 +459,7 @@
}
/**
- * Simply calls _clients_info() while holding the drm_device::struct_sem lock.
+ * Simply calls _clients_info() while holding the drm_device::struct_mutex lock.
*/
static int drm_clients_info(char *buf, char **start, off_t offset,
int request, int *eof, void *data)
@@ -467,9 +467,9 @@
drm_device_t *dev = (drm_device_t *) data;
int ret;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
ret = drm__clients_info(buf, start, offset, request, eof, data);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return ret;
}
@@ -540,9 +540,9 @@
drm_device_t *dev = (drm_device_t *) data;
int ret;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
ret = drm__vma_info(buf, start, offset, request, eof, data);
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
return ret;
}
#endif
diff --git a/drivers/char/drm/drm_stub.c b/drivers/char/drm/drm_stub.c
index 42d7663..68073e1 100644
--- a/drivers/char/drm/drm_stub.c
+++ b/drivers/char/drm/drm_stub.c
@@ -50,7 +50,7 @@
module_param_named(debug, drm_debug, int, 0600);
drm_head_t **drm_heads;
-struct drm_sysfs_class *drm_class;
+struct class *drm_class;
struct proc_dir_entry *drm_proc_root;
static int drm_fill_in_dev(drm_device_t * dev, struct pci_dev *pdev,
@@ -61,8 +61,8 @@
spin_lock_init(&dev->count_lock);
init_timer(&dev->timer);
- sema_init(&dev->struct_sem, 1);
- sema_init(&dev->ctxlist_sem, 1);
+ mutex_init(&dev->struct_mutex);
+ mutex_init(&dev->ctxlist_mutex);
dev->pdev = pdev;
diff --git a/drivers/char/drm/drm_sysfs.c b/drivers/char/drm/drm_sysfs.c
index 68e43dd..0b9f98a 100644
--- a/drivers/char/drm/drm_sysfs.c
+++ b/drivers/char/drm/drm_sysfs.c
@@ -1,3 +1,4 @@
+
/*
* drm_sysfs.c - Modifications to drm_sysfs_class.c to support
* extra sysfs attribute from DRM. Normal drm_sysfs_class
@@ -19,36 +20,6 @@
#include "drm_core.h"
#include "drmP.h"
-struct drm_sysfs_class {
- struct class_device_attribute attr;
- struct class class;
-};
-#define to_drm_sysfs_class(d) container_of(d, struct drm_sysfs_class, class)
-
-struct simple_dev {
- dev_t dev;
- struct class_device class_dev;
-};
-#define to_simple_dev(d) container_of(d, struct simple_dev, class_dev)
-
-static void release_simple_dev(struct class_device *class_dev)
-{
- struct simple_dev *s_dev = to_simple_dev(class_dev);
- kfree(s_dev);
-}
-
-static ssize_t show_dev(struct class_device *class_dev, char *buf)
-{
- struct simple_dev *s_dev = to_simple_dev(class_dev);
- return print_dev_t(buf, s_dev->dev);
-}
-
-static void drm_sysfs_class_release(struct class *class)
-{
- struct drm_sysfs_class *cs = to_drm_sysfs_class(class);
- kfree(cs);
-}
-
/* Display the version of drm_core. This doesn't work right in current design */
static ssize_t version_show(struct class *dev, char *buf)
{
@@ -69,38 +40,16 @@
* Note, the pointer created here is to be destroyed when finished by making a
* call to drm_sysfs_destroy().
*/
-struct drm_sysfs_class *drm_sysfs_create(struct module *owner, char *name)
+struct class *drm_sysfs_create(struct module *owner, char *name)
{
- struct drm_sysfs_class *cs;
- int retval;
+ struct class *class;
- cs = kmalloc(sizeof(*cs), GFP_KERNEL);
- if (!cs) {
- retval = -ENOMEM;
- goto error;
- }
- memset(cs, 0x00, sizeof(*cs));
+ class = class_create(owner, name);
+ if (!class)
+ return class;
- cs->class.name = name;
- cs->class.class_release = drm_sysfs_class_release;
- cs->class.release = release_simple_dev;
-
- cs->attr.attr.name = "dev";
- cs->attr.attr.mode = S_IRUGO;
- cs->attr.attr.owner = owner;
- cs->attr.show = show_dev;
- cs->attr.store = NULL;
-
- retval = class_register(&cs->class);
- if (retval)
- goto error;
- class_create_file(&cs->class, &class_attr_version);
-
- return cs;
-
- error:
- kfree(cs);
- return ERR_PTR(retval);
+ class_create_file(class, &class_attr_version);
+ return class;
}
/**
@@ -110,12 +59,13 @@
* Note, the pointer to be destroyed must have been created with a call to
* drm_sysfs_create().
*/
-void drm_sysfs_destroy(struct drm_sysfs_class *cs)
+void drm_sysfs_destroy(struct class *class)
{
- if ((cs == NULL) || (IS_ERR(cs)))
+ if ((class == NULL) || (IS_ERR(class)))
return;
- class_unregister(&cs->class);
+ class_remove_file(class, &class_attr_version);
+ class_destroy(class);
}
static ssize_t show_dri(struct class_device *class_device, char *buf)
@@ -132,7 +82,7 @@
/**
* drm_sysfs_device_add - adds a class device to sysfs for a character driver
- * @cs: pointer to the struct drm_sysfs_class that this device should be registered to.
+ * @cs: pointer to the struct class that this device should be registered to.
* @dev: the dev_t for the device to be added.
* @device: a pointer to a struct device that is assiociated with this class device.
* @fmt: string for the class device's name
@@ -141,46 +91,26 @@
* class. A "dev" file will be created, showing the dev_t for the device. The
* pointer to the struct class_device will be returned from the call. Any further
* sysfs files that might be required can be created using this pointer.
- * Note: the struct drm_sysfs_class passed to this function must have previously been
+ * Note: the struct class passed to this function must have previously been
* created with a call to drm_sysfs_create().
*/
-struct class_device *drm_sysfs_device_add(struct drm_sysfs_class *cs,
- drm_head_t *head)
+struct class_device *drm_sysfs_device_add(struct class *cs, drm_head_t *head)
{
- struct simple_dev *s_dev = NULL;
- int i, retval;
+ struct class_device *class_dev;
+ int i;
- if ((cs == NULL) || (IS_ERR(cs))) {
- retval = -ENODEV;
- goto error;
- }
+ class_dev = class_device_create(cs, NULL,
+ MKDEV(DRM_MAJOR, head->minor),
+ &(head->dev->pdev)->dev,
+ "card%d", head->minor);
+ if (!class_dev)
+ return NULL;
- s_dev = kmalloc(sizeof(*s_dev), GFP_KERNEL);
- if (!s_dev) {
- retval = -ENOMEM;
- goto error;
- }
- memset(s_dev, 0x00, sizeof(*s_dev));
-
- s_dev->dev = MKDEV(DRM_MAJOR, head->minor);
- s_dev->class_dev.dev = &(head->dev->pdev)->dev;
- s_dev->class_dev.class = &cs->class;
-
- snprintf(s_dev->class_dev.class_id, BUS_ID_SIZE, "card%d", head->minor);
- retval = class_device_register(&s_dev->class_dev);
- if (retval)
- goto error;
-
- class_device_create_file(&s_dev->class_dev, &cs->attr);
- class_set_devdata(&s_dev->class_dev, head);
+ class_set_devdata(class_dev, head);
for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++)
- class_device_create_file(&s_dev->class_dev, &class_device_attrs[i]);
- return &s_dev->class_dev;
-
-error:
- kfree(s_dev);
- return ERR_PTR(retval);
+ class_device_create_file(class_dev, &class_device_attrs[i]);
+ return class_dev;
}
/**
@@ -192,10 +122,9 @@
*/
void drm_sysfs_device_remove(struct class_device *class_dev)
{
- struct simple_dev *s_dev = to_simple_dev(class_dev);
int i;
for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++)
- class_device_remove_file(&s_dev->class_dev, &class_device_attrs[i]);
- class_device_unregister(&s_dev->class_dev);
+ class_device_remove_file(class_dev, &class_device_attrs[i]);
+ class_device_unregister(class_dev);
}
diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c
index 3f73aa7..0291cd6 100644
--- a/drivers/char/drm/drm_vm.c
+++ b/drivers/char/drm/drm_vm.c
@@ -188,7 +188,7 @@
map = vma->vm_private_data;
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
for (pt = dev->vmalist, prev = NULL; pt; pt = next) {
next = pt->next;
if (pt->vma->vm_private_data == map)
@@ -248,7 +248,7 @@
drm_free(map, sizeof(*map), DRM_MEM_MAPS);
}
}
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
}
/**
@@ -404,12 +404,12 @@
vma_entry = drm_alloc(sizeof(*vma_entry), DRM_MEM_VMAS);
if (vma_entry) {
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
vma_entry->vma = vma;
vma_entry->next = dev->vmalist;
vma_entry->pid = current->pid;
dev->vmalist = vma_entry;
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
}
}
@@ -431,7 +431,7 @@
vma->vm_start, vma->vm_end - vma->vm_start);
atomic_dec(&dev->vma_count);
- down(&dev->struct_sem);
+ mutex_lock(&dev->struct_mutex);
for (pt = dev->vmalist, prev = NULL; pt; prev = pt, pt = pt->next) {
if (pt->vma == vma) {
if (prev) {
@@ -443,7 +443,7 @@
break;
}
}
- up(&dev->struct_sem);
+ mutex_unlock(&dev->struct_mutex);
}
/**
diff --git a/drivers/char/drm/i810_dma.c b/drivers/char/drm/i810_dma.c
index cc1b890..ae0aa6d 100644
--- a/drivers/char/drm/i810_dma.c
+++ b/drivers/char/drm/i810_dma.c
@@ -958,7 +958,7 @@
}
/* Must be called with the lock held */
-void i810_reclaim_buffers(drm_device_t * dev, struct file *filp)
+static void i810_reclaim_buffers(drm_device_t * dev, struct file *filp)
{
drm_device_dma_t *dma = dev->dma;
int i;
diff --git a/drivers/char/drm/i810_drv.h b/drivers/char/drm/i810_drv.h
index a18b80d..e8cf3ff 100644
--- a/drivers/char/drm/i810_drv.h
+++ b/drivers/char/drm/i810_drv.h
@@ -113,8 +113,6 @@
} drm_i810_private_t;
/* i810_dma.c */
-extern void i810_reclaim_buffers(drm_device_t * dev, struct file *filp);
-
extern int i810_driver_dma_quiescent(drm_device_t * dev);
extern void i810_driver_reclaim_buffers_locked(drm_device_t * dev,
struct file *filp);
diff --git a/drivers/char/drm/i830_dma.c b/drivers/char/drm/i830_dma.c
index 4fea32a..163f2cb 100644
--- a/drivers/char/drm/i830_dma.c
+++ b/drivers/char/drm/i830_dma.c
@@ -1239,7 +1239,7 @@
}
/* Must be called with the lock held */
-void i830_reclaim_buffers(drm_device_t * dev, struct file *filp)
+static void i830_reclaim_buffers(drm_device_t * dev, struct file *filp)
{
drm_device_dma_t *dma = dev->dma;
int i;
diff --git a/drivers/char/drm/i830_drv.h b/drivers/char/drm/i830_drv.h
index bf9075b..85bc5be 100644
--- a/drivers/char/drm/i830_drv.h
+++ b/drivers/char/drm/i830_drv.h
@@ -123,9 +123,6 @@
extern drm_ioctl_desc_t i830_ioctls[];
extern int i830_max_ioctl;
-/* i830_dma.c */
-extern void i830_reclaim_buffers(drm_device_t * dev, struct file *filp);
-
/* i830_irq.c */
extern int i830_irq_emit(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg);
diff --git a/drivers/char/drm/i915_dma.c b/drivers/char/drm/i915_dma.c
index 9140703..1ff4c7c 100644
--- a/drivers/char/drm/i915_dma.c
+++ b/drivers/char/drm/i915_dma.c
@@ -344,18 +344,20 @@
int i;
RING_LOCALS;
+ if ((dwords+1) * sizeof(int) >= dev_priv->ring.Size - 8)
+ return DRM_ERR(EINVAL);
+
+ BEGIN_LP_RING(((dwords+1)&~1));
+
for (i = 0; i < dwords;) {
int cmd, sz;
if (DRM_COPY_FROM_USER_UNCHECKED(&cmd, &buffer[i], sizeof(cmd)))
return DRM_ERR(EINVAL);
-/* printk("%d/%d ", i, dwords); */
-
if ((sz = validate_cmd(cmd)) == 0 || i + sz > dwords)
return DRM_ERR(EINVAL);
- BEGIN_LP_RING(sz);
OUT_RING(cmd);
while (++i, --sz) {
@@ -365,9 +367,13 @@
}
OUT_RING(cmd);
}
- ADVANCE_LP_RING();
}
+ if (dwords & 1)
+ OUT_RING(0);
+
+ ADVANCE_LP_RING();
+
return 0;
}
@@ -401,6 +407,21 @@
return 0;
}
+static void i915_emit_breadcrumb(drm_device_t *dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ RING_LOCALS;
+
+ dev_priv->sarea_priv->last_enqueue = dev_priv->counter++;
+
+ BEGIN_LP_RING(4);
+ OUT_RING(CMD_STORE_DWORD_IDX);
+ OUT_RING(20);
+ OUT_RING(dev_priv->counter);
+ OUT_RING(0);
+ ADVANCE_LP_RING();
+}
+
static int i915_dispatch_cmdbuffer(drm_device_t * dev,
drm_i915_cmdbuffer_t * cmd)
{
@@ -429,6 +450,7 @@
return ret;
}
+ i915_emit_breadcrumb(dev);
return 0;
}
@@ -475,12 +497,7 @@
dev_priv->sarea_priv->last_enqueue = dev_priv->counter++;
- BEGIN_LP_RING(4);
- OUT_RING(CMD_STORE_DWORD_IDX);
- OUT_RING(20);
- OUT_RING(dev_priv->counter);
- OUT_RING(0);
- ADVANCE_LP_RING();
+ i915_emit_breadcrumb(dev);
return 0;
}
@@ -657,7 +674,7 @@
value = READ_BREADCRUMB(dev_priv);
break;
default:
- DRM_ERROR("Unkown parameter %d\n", param.param);
+ DRM_ERROR("Unknown parameter %d\n", param.param);
return DRM_ERR(EINVAL);
}
@@ -742,7 +759,8 @@
[DRM_IOCTL_NR(DRM_I915_ALLOC)] = {i915_mem_alloc, DRM_AUTH},
[DRM_IOCTL_NR(DRM_I915_FREE)] = {i915_mem_free, DRM_AUTH},
[DRM_IOCTL_NR(DRM_I915_INIT_HEAP)] = {i915_mem_init_heap, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
- [DRM_IOCTL_NR(DRM_I915_CMDBUFFER)] = {i915_cmdbuffer, DRM_AUTH}
+ [DRM_IOCTL_NR(DRM_I915_CMDBUFFER)] = {i915_cmdbuffer, DRM_AUTH},
+ [DRM_IOCTL_NR(DRM_I915_DESTROY_HEAP)] = { i915_mem_destroy_heap, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY }
};
int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
diff --git a/drivers/char/drm/i915_drm.h b/drivers/char/drm/i915_drm.h
index 77412dd..4cb3da5 100644
--- a/drivers/char/drm/i915_drm.h
+++ b/drivers/char/drm/i915_drm.h
@@ -74,6 +74,30 @@
int pf_active;
int pf_current_page; /* which buffer is being displayed? */
int perf_boxes; /* performance boxes to be displayed */
+ int width, height; /* screen size in pixels */
+
+ drm_handle_t front_handle;
+ int front_offset;
+ int front_size;
+
+ drm_handle_t back_handle;
+ int back_offset;
+ int back_size;
+
+ drm_handle_t depth_handle;
+ int depth_offset;
+ int depth_size;
+
+ drm_handle_t tex_handle;
+ int tex_offset;
+ int tex_size;
+ int log_tex_granularity;
+ int pitch;
+ int rotation; /* 0, 90, 180 or 270 */
+ int rotated_offset;
+ int rotated_size;
+ int rotated_pitch;
+ int virtualX, virtualY;
} drm_i915_sarea_t;
/* Flags for perf_boxes
@@ -99,6 +123,7 @@
#define DRM_I915_FREE 0x09
#define DRM_I915_INIT_HEAP 0x0a
#define DRM_I915_CMDBUFFER 0x0b
+#define DRM_I915_DESTROY_HEAP 0x0c
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
@@ -112,6 +137,7 @@
#define DRM_IOCTL_I915_FREE DRM_IOW( DRM_COMMAND_BASE + DRM_I915_FREE, drm_i915_mem_free_t)
#define DRM_IOCTL_I915_INIT_HEAP DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT_HEAP, drm_i915_mem_init_heap_t)
#define DRM_IOCTL_I915_CMDBUFFER DRM_IOW( DRM_COMMAND_BASE + DRM_I915_CMDBUFFER, drm_i915_cmdbuffer_t)
+#define DRM_IOCTL_I915_DESTROY_HEAP DRM_IOW( DRM_COMMAND_BASE + DRM_I915_DESTROY_HEAP, drm_i915_mem_destroy_heap_t)
/* Allow drivers to submit batchbuffers directly to hardware, relying
* on the security mechanisms provided by hardware.
@@ -191,4 +217,11 @@
int start;
} drm_i915_mem_init_heap_t;
+/* Allow memory manager to be torn down and re-initialized (eg on
+ * rotate):
+ */
+typedef struct drm_i915_mem_destroy_heap {
+ int region;
+} drm_i915_mem_destroy_heap_t;
+
#endif /* _I915_DRM_H_ */
diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h
index c6c71b4..7a65666 100644
--- a/drivers/char/drm/i915_drv.h
+++ b/drivers/char/drm/i915_drv.h
@@ -37,16 +37,17 @@
#define DRIVER_NAME "i915"
#define DRIVER_DESC "Intel Graphics"
-#define DRIVER_DATE "20051209"
+#define DRIVER_DATE "20060119"
/* Interface history:
*
* 1.1: Original.
* 1.2: Add Power Management
* 1.3: Add vblank support
+ * 1.4: Fix cmdbuffer path, add heap destroy
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 3
+#define DRIVER_MINOR 4
#define DRIVER_PATCHLEVEL 0
typedef struct _drm_i915_ring_buffer {
@@ -123,6 +124,7 @@
extern int i915_mem_alloc(DRM_IOCTL_ARGS);
extern int i915_mem_free(DRM_IOCTL_ARGS);
extern int i915_mem_init_heap(DRM_IOCTL_ARGS);
+extern int i915_mem_destroy_heap(DRM_IOCTL_ARGS);
extern void i915_mem_takedown(struct mem_block **heap);
extern void i915_mem_release(drm_device_t * dev,
DRMFILE filp, struct mem_block *heap);
diff --git a/drivers/char/drm/i915_mem.c b/drivers/char/drm/i915_mem.c
index ba87ff1..52c6732 100644
--- a/drivers/char/drm/i915_mem.c
+++ b/drivers/char/drm/i915_mem.c
@@ -365,3 +365,34 @@
return init_heap(heap, initheap.start, initheap.size);
}
+
+int i915_mem_destroy_heap( DRM_IOCTL_ARGS )
+{
+ DRM_DEVICE;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ drm_i915_mem_destroy_heap_t destroyheap;
+ struct mem_block **heap;
+
+ if ( !dev_priv ) {
+ DRM_ERROR( "%s called with no initialization\n", __FUNCTION__ );
+ return DRM_ERR(EINVAL);
+ }
+
+ DRM_COPY_FROM_USER_IOCTL( destroyheap, (drm_i915_mem_destroy_heap_t *)data,
+ sizeof(destroyheap) );
+
+ heap = get_heap( dev_priv, destroyheap.region );
+ if (!heap) {
+ DRM_ERROR("get_heap failed");
+ return DRM_ERR(EFAULT);
+ }
+
+ if (!*heap) {
+ DRM_ERROR("heap not initialized?");
+ return DRM_ERR(EFAULT);
+ }
+
+ i915_mem_takedown( heap );
+ return 0;
+}
+
diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c
index 915665c..9bb8ae0 100644
--- a/drivers/char/drm/radeon_cp.c
+++ b/drivers/char/drm/radeon_cp.c
@@ -1640,7 +1640,7 @@
if (dev_priv->gart_info.gart_table_location == DRM_ATI_GART_FB)
{
drm_core_ioremapfree(&dev_priv->gart_info.mapping, dev);
- dev_priv->gart_info.addr = 0;
+ dev_priv->gart_info.addr = NULL;
}
}
/* only clear to the start of flags */
diff --git a/drivers/char/drm/savage_bci.c b/drivers/char/drm/savage_bci.c
index 0d426de..59c7520 100644
--- a/drivers/char/drm/savage_bci.c
+++ b/drivers/char/drm/savage_bci.c
@@ -32,6 +32,8 @@
#define SAVAGE_EVENT_USEC_TIMEOUT 5000000 /* 5s */
#define SAVAGE_FREELIST_DEBUG 0
+static int savage_do_cleanup_bci(drm_device_t *dev);
+
static int
savage_bci_wait_fifo_shadow(drm_savage_private_t * dev_priv, unsigned int n)
{
@@ -895,7 +897,7 @@
return 0;
}
-int savage_do_cleanup_bci(drm_device_t * dev)
+static int savage_do_cleanup_bci(drm_device_t * dev)
{
drm_savage_private_t *dev_priv = dev->dev_private;
diff --git a/drivers/char/drm/savage_drv.h b/drivers/char/drm/savage_drv.h
index dd46cb8..8f04b3d 100644
--- a/drivers/char/drm/savage_drv.h
+++ b/drivers/char/drm/savage_drv.h
@@ -212,7 +212,6 @@
extern int savage_driver_firstopen(drm_device_t *dev);
extern void savage_driver_lastclose(drm_device_t *dev);
extern int savage_driver_unload(drm_device_t *dev);
-extern int savage_do_cleanup_bci(drm_device_t * dev);
extern void savage_reclaim_buffers(drm_device_t * dev, DRMFILE filp);
/* state functions */
diff --git a/drivers/char/drm/via_dma.c b/drivers/char/drm/via_dma.c
index 593c0b8..a691ae7 100644
--- a/drivers/char/drm/via_dma.c
+++ b/drivers/char/drm/via_dma.c
@@ -222,7 +222,7 @@
return 0;
}
-int via_dma_init(DRM_IOCTL_ARGS)
+static int via_dma_init(DRM_IOCTL_ARGS)
{
DRM_DEVICE;
drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
@@ -321,7 +321,7 @@
return 0;
}
-int via_flush_ioctl(DRM_IOCTL_ARGS)
+static int via_flush_ioctl(DRM_IOCTL_ARGS)
{
DRM_DEVICE;
@@ -330,7 +330,7 @@
return via_driver_dma_quiescent(dev);
}
-int via_cmdbuffer(DRM_IOCTL_ARGS)
+static int via_cmdbuffer(DRM_IOCTL_ARGS)
{
DRM_DEVICE;
drm_via_cmdbuffer_t cmdbuf;
@@ -375,7 +375,7 @@
return ret;
}
-int via_pci_cmdbuffer(DRM_IOCTL_ARGS)
+static int via_pci_cmdbuffer(DRM_IOCTL_ARGS)
{
DRM_DEVICE;
drm_via_cmdbuffer_t cmdbuf;
@@ -665,7 +665,7 @@
* User interface to the space and lag functions.
*/
-int via_cmdbuf_size(DRM_IOCTL_ARGS)
+static int via_cmdbuf_size(DRM_IOCTL_ARGS)
{
DRM_DEVICE;
drm_via_cmdbuf_size_t d_siz;
diff --git a/drivers/char/drm/via_dmablit.c b/drivers/char/drm/via_dmablit.c
index 9d5e027..b7f1745 100644
--- a/drivers/char/drm/via_dmablit.c
+++ b/drivers/char/drm/via_dmablit.c
@@ -108,7 +108,7 @@
int num_desc = 0;
int cur_line;
dma_addr_t next = 0 | VIA_DMA_DPR_EC;
- drm_via_descriptor_t *desc_ptr = 0;
+ drm_via_descriptor_t *desc_ptr = NULL;
if (mode == 1)
desc_ptr = vsg->desc_pages[cur_descriptor_page];
@@ -167,7 +167,7 @@
*/
-void
+static void
via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
{
struct page *page;
@@ -581,7 +581,7 @@
int ret = 0;
vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
- vsg->bounce_buffer = 0;
+ vsg->bounce_buffer = NULL;
vsg->state = dr_via_sg_init;
diff --git a/drivers/char/drm/via_drv.h b/drivers/char/drm/via_drv.h
index aad4f99..52bcc7b 100644
--- a/drivers/char/drm/via_drv.h
+++ b/drivers/char/drm/via_drv.h
@@ -110,11 +110,6 @@
extern int via_agp_init(DRM_IOCTL_ARGS);
extern int via_map_init(DRM_IOCTL_ARGS);
extern int via_decoder_futex(DRM_IOCTL_ARGS);
-extern int via_dma_init(DRM_IOCTL_ARGS);
-extern int via_cmdbuffer(DRM_IOCTL_ARGS);
-extern int via_flush_ioctl(DRM_IOCTL_ARGS);
-extern int via_pci_cmdbuffer(DRM_IOCTL_ARGS);
-extern int via_cmdbuf_size(DRM_IOCTL_ARGS);
extern int via_wait_irq(DRM_IOCTL_ARGS);
extern int via_dma_blit_sync( DRM_IOCTL_ARGS );
extern int via_dma_blit( DRM_IOCTL_ARGS );
@@ -139,8 +134,6 @@
extern void via_init_futex(drm_via_private_t * dev_priv);
extern void via_cleanup_futex(drm_via_private_t * dev_priv);
extern void via_release_futex(drm_via_private_t * dev_priv, int context);
-extern int via_driver_irq_wait(drm_device_t * dev, unsigned int irq,
- int force_sequence, unsigned int *sequence);
extern void via_dmablit_handler(drm_device_t *dev, int engine, int from_irq);
extern void via_init_dmablit(drm_device_t *dev);
diff --git a/drivers/char/drm/via_irq.c b/drivers/char/drm/via_irq.c
index 56d7e3d..6152415 100644
--- a/drivers/char/drm/via_irq.c
+++ b/drivers/char/drm/via_irq.c
@@ -190,7 +190,7 @@
return ret;
}
-int
+static int
via_driver_irq_wait(drm_device_t * dev, unsigned int irq, int force_sequence,
unsigned int *sequence)
{
diff --git a/drivers/char/esp.c b/drivers/char/esp.c
index 3f3ac03..57539d8 100644
--- a/drivers/char/esp.c
+++ b/drivers/char/esp.c
@@ -359,7 +359,7 @@
}
}
- schedule_delayed_work(&tty->buf.work, 1);
+ tty_schedule_flip(tty);
info->stat_flags &= ~ESP_STAT_RX_TIMEOUT;
release_pio_buffer(pio_buf);
@@ -426,7 +426,7 @@
}
tty_insert_flip_char(tty, dma_buffer[num_bytes - 1], statflag);
}
- schedule_delayed_work(&tty->buf.work, 1);
+ tty_schedule_flip(tty);
}
if (dma_bytes != num_bytes) {
diff --git a/drivers/char/hangcheck-timer.c b/drivers/char/hangcheck-timer.c
index 40a67c8..ac62641 100644
--- a/drivers/char/hangcheck-timer.c
+++ b/drivers/char/hangcheck-timer.c
@@ -117,12 +117,9 @@
__setup("hcheck_dump_tasks", hangcheck_parse_dump_tasks);
#endif /* not MODULE */
-#if defined(CONFIG_X86)
+#if defined(CONFIG_X86) || defined(CONFIG_S390)
# define HAVE_MONOTONIC
# define TIMER_FREQ 1000000000ULL
-#elif defined(CONFIG_S390)
-/* FA240000 is 1 Second in the IBM time universe (Page 4-38 Principles of Op for zSeries */
-# define TIMER_FREQ 0xFA240000ULL
#elif defined(CONFIG_IA64)
# define TIMER_FREQ ((unsigned long long)local_cpu_data->itc_freq)
#elif defined(CONFIG_PPC64)
@@ -134,12 +131,7 @@
#else
static inline unsigned long long monotonic_clock(void)
{
-# ifdef __s390__
- /* returns the TOD. see 4-38 Principles of Op of zSeries */
- return get_clock();
-# else
return get_cycles();
-# endif /* __s390__ */
}
#endif /* HAVE_MONOTONIC */
@@ -188,8 +180,6 @@
VERSION_STR, hangcheck_tick, hangcheck_margin);
#if defined (HAVE_MONOTONIC)
printk("Hangcheck: Using monotonic_clock().\n");
-#elif defined(__s390__)
- printk("Hangcheck: Using TOD.\n");
#else
printk("Hangcheck: Using get_cycles().\n");
#endif /* HAVE_MONOTONIC */
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 3808d95..66a2fee 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -927,9 +927,9 @@
if (ACPI_SUCCESS(status)) {
unsigned long size;
- size = addr.max_address_range - addr.min_address_range + 1;
- hdp->hd_phys_address = addr.min_address_range;
- hdp->hd_address = ioremap(addr.min_address_range, size);
+ size = addr.maximum - addr.minimum + 1;
+ hdp->hd_phys_address = addr.minimum;
+ hdp->hd_address = ioremap(addr.minimum, size);
if (hpet_is_known(hdp)) {
printk(KERN_DEBUG "%s: 0x%lx is busy\n",
@@ -937,15 +937,15 @@
iounmap(hdp->hd_address);
return -EBUSY;
}
- } else if (res->id == ACPI_RSTYPE_FIXED_MEM32) {
- struct acpi_resource_fixed_mem32 *fixmem32;
+ } else if (res->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) {
+ struct acpi_resource_fixed_memory32 *fixmem32;
fixmem32 = &res->data.fixed_memory32;
if (!fixmem32)
return -EINVAL;
- hdp->hd_phys_address = fixmem32->range_base_address;
- hdp->hd_address = ioremap(fixmem32->range_base_address,
+ hdp->hd_phys_address = fixmem32->address;
+ hdp->hd_address = ioremap(fixmem32->address,
HPET_RANGE_SIZE);
if (hpet_is_known(hdp)) {
@@ -954,20 +954,20 @@
iounmap(hdp->hd_address);
return -EBUSY;
}
- } else if (res->id == ACPI_RSTYPE_EXT_IRQ) {
- struct acpi_resource_ext_irq *irqp;
+ } else if (res->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) {
+ struct acpi_resource_extended_irq *irqp;
int i;
irqp = &res->data.extended_irq;
- if (irqp->number_of_interrupts > 0) {
- hdp->hd_nirqs = irqp->number_of_interrupts;
+ if (irqp->interrupt_count > 0) {
+ hdp->hd_nirqs = irqp->interrupt_count;
for (i = 0; i < hdp->hd_nirqs; i++) {
int rc =
acpi_register_gsi(irqp->interrupts[i],
- irqp->edge_level,
- irqp->active_high_low);
+ irqp->triggering,
+ irqp->polarity);
if (rc < 0)
return AE_ERROR;
hdp->hd_irq[i] = rc;
diff --git a/drivers/char/ip2/i2cmd.c b/drivers/char/ip2/i2cmd.c
index cb8f419..e7af647 100644
--- a/drivers/char/ip2/i2cmd.c
+++ b/drivers/char/ip2/i2cmd.c
@@ -139,7 +139,6 @@
//static UCHAR ct86[]={ 2, BTH, 0x56,0 }; // RCV_ENABLE
static UCHAR ct87[] = { 1, BYP, 0x57 }; // HW_TEST
//static UCHAR ct88[]={ 3, BTH, 0x58,0,0 }; // RCV_THRESHOLD
-static UCHAR ct89[]={ 1, BYP, 0x59 }; // DSS_NOW
//static UCHAR ct90[]={ 3, BYP, 0x5A,0,0 }; // Set SILO
//static UCHAR ct91[]={ 2, BYP, 0x5B,0 }; // timed break
diff --git a/drivers/char/ip2main.c b/drivers/char/ip2main.c
index 56e93a5..48fcfba 100644
--- a/drivers/char/ip2main.c
+++ b/drivers/char/ip2main.c
@@ -2906,65 +2906,16 @@
rc = -EINVAL;
break;
case 3: // Trace device
- if ( cmd == 1 ) {
- rc = put_user(iiSendPendingMail, pIndex++ );
- rc = put_user(i2InitChannels, pIndex++ );
- rc = put_user(i2QueueNeeds, pIndex++ );
- rc = put_user(i2QueueCommands, pIndex++ );
- rc = put_user(i2GetStatus, pIndex++ );
- rc = put_user(i2Input, pIndex++ );
- rc = put_user(i2InputFlush, pIndex++ );
- rc = put_user(i2Output, pIndex++ );
- rc = put_user(i2FlushOutput, pIndex++ );
- rc = put_user(i2DrainWakeup, pIndex++ );
- rc = put_user(i2DrainOutput, pIndex++ );
- rc = put_user(i2OutputFree, pIndex++ );
- rc = put_user(i2StripFifo, pIndex++ );
- rc = put_user(i2StuffFifoBypass, pIndex++ );
- rc = put_user(i2StuffFifoFlow, pIndex++ );
- rc = put_user(i2StuffFifoInline, pIndex++ );
- rc = put_user(i2ServiceBoard, pIndex++ );
- rc = put_user(serviceOutgoingFifo, pIndex++ );
- // rc = put_user(ip2_init, pIndex++ );
- rc = put_user(ip2_init_board, pIndex++ );
- rc = put_user(find_eisa_board, pIndex++ );
- rc = put_user(set_irq, pIndex++ );
- rc = put_user(ip2_interrupt, pIndex++ );
- rc = put_user(ip2_poll, pIndex++ );
- rc = put_user(service_all_boards, pIndex++ );
- rc = put_user(do_input, pIndex++ );
- rc = put_user(do_status, pIndex++ );
-#ifndef IP2DEBUG_OPEN
- rc = put_user(0, pIndex++ );
-#else
- rc = put_user(open_sanity_check, pIndex++ );
-#endif
- rc = put_user(ip2_open, pIndex++ );
- rc = put_user(ip2_close, pIndex++ );
- rc = put_user(ip2_hangup, pIndex++ );
- rc = put_user(ip2_write, pIndex++ );
- rc = put_user(ip2_putchar, pIndex++ );
- rc = put_user(ip2_flush_chars, pIndex++ );
- rc = put_user(ip2_write_room, pIndex++ );
- rc = put_user(ip2_chars_in_buf, pIndex++ );
- rc = put_user(ip2_flush_buffer, pIndex++ );
-
- //rc = put_user(ip2_wait_until_sent, pIndex++ );
- rc = put_user(0, pIndex++ );
-
- rc = put_user(ip2_throttle, pIndex++ );
- rc = put_user(ip2_unthrottle, pIndex++ );
- rc = put_user(ip2_ioctl, pIndex++ );
- rc = put_user(0, pIndex++ );
- rc = put_user(get_serial_info, pIndex++ );
- rc = put_user(set_serial_info, pIndex++ );
- rc = put_user(ip2_set_termios, pIndex++ );
- rc = put_user(ip2_set_line_discipline, pIndex++ );
- rc = put_user(set_params, pIndex++ );
- } else {
+ /*
+ * akpm: This used to write a whole bunch of function addresses
+ * to userspace, which generated lots of put_user() warnings.
+ * I killed it all. Just return "success" and don't do
+ * anything.
+ */
+ if (cmd == 1)
+ rc = 0;
+ else
rc = -EINVAL;
- }
-
break;
default:
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 0097f06..d745004 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -481,7 +481,7 @@
}
if ((addr->channel == IPMI_BMC_CHANNEL)
- || (addr->channel >= IPMI_NUM_CHANNELS)
+ || (addr->channel >= IPMI_MAX_CHANNELS)
|| (addr->channel < 0))
return -EINVAL;
@@ -1321,7 +1321,7 @@
unsigned char ipmb_seq;
long seqid;
- if (addr->channel >= IPMI_NUM_CHANNELS) {
+ if (addr->channel >= IPMI_MAX_CHANNELS) {
spin_lock_irqsave(&intf->counter_lock, flags);
intf->sent_invalid_commands++;
spin_unlock_irqrestore(&intf->counter_lock, flags);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index c67ef3e..e59b638 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1270,36 +1270,36 @@
return 0;
}
-static unsigned char mem_inb(struct si_sm_io *io, unsigned int offset)
+static unsigned char intf_mem_inb(struct si_sm_io *io, unsigned int offset)
{
return readb((io->addr)+(offset * io->regspacing));
}
-static void mem_outb(struct si_sm_io *io, unsigned int offset,
+static void intf_mem_outb(struct si_sm_io *io, unsigned int offset,
unsigned char b)
{
writeb(b, (io->addr)+(offset * io->regspacing));
}
-static unsigned char mem_inw(struct si_sm_io *io, unsigned int offset)
+static unsigned char intf_mem_inw(struct si_sm_io *io, unsigned int offset)
{
return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift)
&& 0xff;
}
-static void mem_outw(struct si_sm_io *io, unsigned int offset,
+static void intf_mem_outw(struct si_sm_io *io, unsigned int offset,
unsigned char b)
{
writeb(b << io->regshift, (io->addr)+(offset * io->regspacing));
}
-static unsigned char mem_inl(struct si_sm_io *io, unsigned int offset)
+static unsigned char intf_mem_inl(struct si_sm_io *io, unsigned int offset)
{
return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift)
&& 0xff;
}
-static void mem_outl(struct si_sm_io *io, unsigned int offset,
+static void intf_mem_outl(struct si_sm_io *io, unsigned int offset,
unsigned char b)
{
writel(b << io->regshift, (io->addr)+(offset * io->regspacing));
@@ -1349,16 +1349,16 @@
upon the register size. */
switch (info->io.regsize) {
case 1:
- info->io.inputb = mem_inb;
- info->io.outputb = mem_outb;
+ info->io.inputb = intf_mem_inb;
+ info->io.outputb = intf_mem_outb;
break;
case 2:
- info->io.inputb = mem_inw;
- info->io.outputb = mem_outw;
+ info->io.inputb = intf_mem_inw;
+ info->io.outputb = intf_mem_outw;
break;
case 4:
- info->io.inputb = mem_inl;
- info->io.outputb = mem_outl;
+ info->io.inputb = intf_mem_inl;
+ info->io.outputb = intf_mem_outl;
break;
#ifdef readq
case 8:
@@ -1580,11 +1580,6 @@
if (! is_new_interface(-1, addr_space, spmi->addr.address))
return -ENODEV;
- if (! spmi->addr.register_bit_width) {
- acpi_failure = 1;
- return -ENODEV;
- }
-
/* Figure out the interface type. */
switch (spmi->InterfaceType)
{
@@ -1634,9 +1629,6 @@
regspacings[intf_num] = spmi->addr.register_bit_width / 8;
info->io.regspacing = spmi->addr.register_bit_width / 8;
} else {
- /* Some broken systems get this wrong and set the value
- * to zero. Assume it is the default spacing. If that
- * is wrong, too bad, the vendor should fix the tables. */
regspacings[intf_num] = DEFAULT_REGSPACING;
info->io.regspacing = DEFAULT_REGSPACING;
}
diff --git a/drivers/char/rio/cirrus.h b/drivers/char/rio/cirrus.h
index 217ff09..89bd94e 100644
--- a/drivers/char/rio/cirrus.h
+++ b/drivers/char/rio/cirrus.h
@@ -40,148 +40,6 @@
#endif
#define _cirrus_h 1
-#ifdef RTA
-#define TO_UART RX
-#define TO_DRIVER TX
-#endif
-
-#ifdef HOST
-#define TO_UART TX
-#define TO_DRIVER RX
-#endif
-#ifdef RTA
-/* Miscellaneous defines for CIRRUS addresses and related logic for
- interrupts etc.
-*/
-#define MAP(a) ((short *)(cirrus_base + (a)))
-#define outp(a,b) (*MAP (a) =(b))
-#define inp(a) ((*MAP (a)) & 0xff)
-#define CIRRUS_FIRST (short*)0x7300
-#define CIRRUS_SECOND (short*)0x7200
-#define CIRRUS_THIRD (short*)0x7100
-#define CIRRUS_FOURTH (short*)0x7000
-#define PORTS_ON_CIRRUS 4
-#define CIRRUS_FIFO_SIZE 12
-#define SPACE 0x20
-#define TAB 0x09
-#define LINE_FEED 0x0a
-#define CARRIAGE_RETURN 0x0d
-#define BACKSPACE 0x08
-#define SPACES_IN_TABS 8
-#define SEND_ESCAPE 0x00
-#define START_BREAK 0x81
-#define TIMER_TICK 0x82
-#define STOP_BREAK 0x83
-#define BASE(a) ((a) < 4 ? (short*)CIRRUS_FIRST : ((a) < 8 ? (short *)CIRRUS_SECOND : ((a) < 12 ? (short*)CIRRUS_THIRD : (short *)CIRRUS_FOURTH)))
-#define txack1 ((short *)0x7104)
-#define rxack1 ((short *)0x7102)
-#define mdack1 ((short *)0x7106)
-#define txack2 ((short *)0x7006)
-#define rxack2 ((short *)0x7004)
-#define mdack2 ((short *)0x7100)
-#define int_latch ((short *) 0x7800)
-#define int_status ((short *) 0x7c00)
-#define tx1_pending 0x20
-#define rx1_pending 0x10
-#define md1_pending 0x40
-#define tx2_pending 0x02
-#define rx2_pending 0x01
-#define md2_pending 0x40
-#define module1_bits 0x07
-#define module1_modern 0x08
-#define module2_bits 0x70
-#define module2_modern 0x80
-#define module_blank 0xf
-#define rs232_d25 0x0
-#define rs232_rj45 0x1
-#define rs422_d25 0x3
-#define parallel 0x5
-
-#define CLK0 0x00
-#define CLK1 0x01
-#define CLK2 0x02
-#define CLK3 0x03
-#define CLK4 0x04
-
-#define CIRRUS_REVC 0x42
-#define CIRRUS_REVE 0x44
-
-#define TURNON 1
-#define TURNOFF 0
-
-/* The list of CIRRUS registers.
- NB. These registers are relative values on 8 bit boundaries whereas
- on the RTA's the CIRRUS registers are on word boundaries. Use pointer
- arithmetic (short *) to obtain the real addresses required */
-#define ccr 0x05 /* Channel Command Register */
-#define ier 0x06 /* Interrupt Enable Register */
-#define cor1 0x08 /* Channel Option Register 1 */
-#define cor2 0x09 /* Channel Option Register 2 */
-#define cor3 0x0a /* Channel Option Register 3 */
-#define cor4 0x1e /* Channel Option Register 4 */
-#define cor5 0x1f /* Channel Option Register 5 */
-
-#define ccsr 0x0b /* Channel Control Status Register */
-#define rdcr 0x0e /* Receive Data Count Register */
-#define tdcr 0x12 /* Transmit Data Count Register */
-#define mcor1 0x15 /* Modem Change Option Register 1 */
-#define mcor2 0x16 /* Modem Change Option Regsiter 2 */
-
-#define livr 0x18 /* Local Interrupt Vector Register */
-#define schr1 0x1a /* Special Character Register 1 */
-#define schr2 0x1b /* Special Character Register 2 */
-#define schr3 0x1c /* Special Character Register 3 */
-#define schr4 0x1d /* Special Character Register 4 */
-
-#define rtr 0x20 /* Receive Timer Register */
-#define rtpr 0x21 /* Receive Timeout Period Register */
-#define lnc 0x24 /* Lnext character */
-
-#define rivr 0x43 /* Receive Interrupt Vector Register */
-#define tivr 0x42 /* Transmit Interrupt Vector Register */
-#define mivr 0x41 /* Modem Interrupt Vector Register */
-#define gfrcr 0x40 /* Global Firmware Revision code Reg */
-#define ricr 0x44 /* Receive Interrupting Channel Reg */
-#define ticr 0x45 /* Transmit Interrupting Channel Reg */
-#define micr 0x46 /* Modem Interrupting Channel Register */
-
-#define gcr 0x4b /* Global configuration register */
-#define misr 0x4c /* Modem interrupt status register */
-
-#define rbusr 0x59
-#define tbusr 0x5a
-#define mbusr 0x5b
-
-#define eoir 0x60 /* End Of Interrupt Register */
-#define rdsr 0x62 /* Receive Data / Status Register */
-#define tdr 0x63 /* Transmit Data Register */
-#define svrr 0x67 /* Service Request Register */
-
-#define car 0x68 /* Channel Access Register */
-#define mir 0x69 /* Modem Interrupt Register */
-#define tir 0x6a /* Transmit Interrupt Register */
-#define rir 0x6b /* Receive Interrupt Register */
-#define msvr1 0x6c /* Modem Signal Value Register 1 */
-#define msvr2 0x6d /* Modem Signal Value Register 2 */
-#define psvr 0x6f /* Printer Signal Value Register */
-
-#define tbpr 0x72 /* Transmit Baud Rate Period Register */
-#define tcor 0x76 /* Transmit Clock Option Register */
-
-#define rbpr 0x78 /* Receive Baud Rate Period Register */
-#define rber 0x7a /* Receive Baud Rate Extension Register */
-#define rcor 0x7c /* Receive Clock Option Register */
-#define ppr 0x7e /* Prescalar Period Register */
-
-/* Misc registers used for forcing the 1400 out of its reset woes */
-#define airl 0x6d
-#define airm 0x6e
-#define airh 0x6f
-#define btcr 0x66
-#define mtcr 0x6c
-#define tber 0x74
-
-#endif /* #ifdef RTA */
/* Bit fields for particular registers */
diff --git a/drivers/char/rio/defaults.h b/drivers/char/rio/defaults.h
index 5b600c3..d55c2f6 100644
--- a/drivers/char/rio/defaults.h
+++ b/drivers/char/rio/defaults.h
@@ -45,13 +45,6 @@
#define MILLISECOND (int) (1000/64) /* 15.625 low ticks */
#define SECOND (int) 15625 /* Low priority ticks */
-#ifdef RTA
-#define RX_LIMIT (ushort) 3
-#endif
-#ifdef HOST
-#define RX_LIMIT (ushort) 1
-#endif
-
#define LINK_TIMEOUT (int) (POLL_PERIOD / 2)
diff --git a/drivers/char/rio/link.h b/drivers/char/rio/link.h
index bfba5b0..48d68ca 100644
--- a/drivers/char/rio/link.h
+++ b/drivers/char/rio/link.h
@@ -102,30 +102,14 @@
/*
** LED stuff
*/
-#if defined(RTA)
-#define LED_OFF ((ushort) 0) /* LED off */
-#define LED_RED ((ushort) 1) /* LED Red */
-#define LED_GREEN ((ushort) 2) /* LED Green */
-#define LED_ORANGE ((ushort) 4) /* LED Orange */
-#define LED_1TO8_OPEN ((ushort) 1) /* Port 1->8 LED on */
-#define LED_9TO16_OPEN ((ushort) 2) /* Port 9->16 LED on */
-#define LED_SET_COLOUR(colour) (link->led = (colour))
-#define LED_OR_COLOUR(colour) (link->led |= (colour))
-#define LED_TIMEOUT(time) (link->led_timeout = RioTimePlus(RioTime(),(time)))
-#else
#define LED_SET_COLOUR(colour)
#define LED_OR_COLOUR(colour)
#define LED_TIMEOUT(time)
-#endif /* RTA */
struct LPB {
WORD link_number; /* Link Number */
Channel_ptr in_ch; /* Link In Channel */
Channel_ptr out_ch; /* Link Out Channel */
-#ifdef RTA
- uchar stat_led; /* Port open leds */
- uchar led; /* True, light led! */
-#endif
BYTE attached_serial[4]; /* Attached serial number */
BYTE attached_host_serial[4];
/* Serial number of Host who
@@ -144,30 +128,12 @@
WORD WaitNoBoot; /* Secs to hold off booting */
PKT_ptr add_packet_list; /* Add packets to here */
PKT_ptr remove_packet_list; /* Send packets from here */
-#ifdef RTA
-#ifdef DCIRRUS
-#define QBUFS_PER_REDIRECT (4 / PKTS_PER_BUFFER + 1)
-#else
-#define QBUFS_PER_REDIRECT (8 / PKTS_PER_BUFFER + 1)
-#endif
- PKT_ptr_ptr rd_add; /* Add a new Packet here */
- Q_BUF_ptr rd_add_qb; /* Pointer to the add Q buf */
- PKT_ptr_ptr rd_add_st_qbb; /* Pointer to start of the Q's buf */
- PKT_ptr_ptr rd_add_end_qbb; /* Pointer to the end of the Q's buf */
- PKT_ptr_ptr rd_remove; /* Remove a Packet here */
- Q_BUF_ptr rd_remove_qb; /* Pointer to the remove Q buf */
- PKT_ptr_ptr rd_remove_st_qbb; /* Pointer to the start of the Q buf */
- PKT_ptr_ptr rd_remove_end_qbb; /* Pointer to the end of the Q buf */
- ushort pkts_in_q; /* Packets in queue */
-#endif
Channel_ptr lrt_fail_chan; /* Lrt's failure channel */
Channel_ptr ltt_fail_chan; /* Ltt's failure channel */
-#if defined (HOST) || defined (INKERNEL)
/* RUP structure for HOST to driver communications */
struct RUP rup;
-#endif
struct RUP link_rup; /* RUP for the link (POLL,
topology etc.) */
WORD attached_link; /* Number of attached link */
diff --git a/drivers/char/rio/list.h b/drivers/char/rio/list.h
index 36aad4c..79b8531 100644
--- a/drivers/char/rio/list.h
+++ b/drivers/char/rio/list.h
@@ -44,8 +44,6 @@
#define PKT_IN_USE 0x1
-#ifdef INKERNEL
-
#define ZERO_PTR (ushort) 0x8000
#define CaD PortP->Caddr
@@ -54,143 +52,5 @@
** to by the TxAdd pointer has PKT_IN_USE clear in its address.
*/
-#ifndef linux
-#if defined( MIPS ) && !defined( MIPSEISA )
-/* May the shoes of the Devil dance on your grave for creating this */
-#define can_add_transmit(PacketP,PortP) \
- (!((uint)(PacketP = (struct PKT *)RIO_PTR(CaD,RINDW(PortP->TxAdd))) \
- & (PKT_IN_USE<<2)))
-
-#elif defined(MIPSEISA) || defined(nx6000) || \
- defined(drs6000) || defined(UWsparc)
-
-#define can_add_transmit(PacketP,PortP) \
- (!((uint)(PacketP = (struct PKT *)RIO_PTR(CaD,RINDW(PortP->TxAdd))) \
- & PKT_IN_USE))
-
-#else
-#define can_add_transmit(PacketP,PortP) \
- (!((uint)(PacketP = (struct PKT *)RIO_PTR(CaD,*PortP->TxAdd)) \
- & PKT_IN_USE))
-#endif
-
-/*
-** To add a packet to the queue, you set the PKT_IN_USE bit in the address,
-** and then move the TxAdd pointer along one position to point to the next
-** packet pointer. You must wrap the pointer from the end back to the start.
-*/
-#if defined(MIPS) || defined(nx6000) || defined(drs6000) || defined(UWsparc)
-# define add_transmit(PortP) \
- WINDW(PortP->TxAdd,RINDW(PortP->TxAdd) | PKT_IN_USE);\
- if (PortP->TxAdd == PortP->TxEnd)\
- PortP->TxAdd = PortP->TxStart;\
- else\
- PortP->TxAdd++;\
- WWORD(PortP->PhbP->tx_add , RIO_OFF(CaD,PortP->TxAdd));
-#elif defined(AIX)
-# define add_transmit(PortP) \
- {\
- register ushort *TxAddP = (ushort *)RIO_PTR(Cad,PortP->TxAddO);\
- WINDW( TxAddP, RINDW( TxAddP ) | PKT_IN_USE );\
- if (PortP->TxAddO == PortP->TxEndO )\
- PortP->TxAddO = PortP->TxStartO;\
- else\
- PortP->TxAddO += sizeof(ushort);\
- WWORD(((PHB *)RIO_PTR(Cad,PortP->PhbO))->tx_add , PortP->TxAddO );\
- }
-#else
-# define add_transmit(PortP) \
- *PortP->TxAdd |= PKT_IN_USE;\
- if (PortP->TxAdd == PortP->TxEnd)\
- PortP->TxAdd = PortP->TxStart;\
- else\
- PortP->TxAdd++;\
- PortP->PhbP->tx_add = RIO_OFF(CaD,PortP->TxAdd);
-#endif
-
-/*
-** can_remove_receive( PacketP, PortP ) returns non-zero if PKT_IN_USE is set
-** for the next packet on the queue. It will also set PacketP to point to the
-** relevant packet, [having cleared the PKT_IN_USE bit]. If PKT_IN_USE is clear,
-** then can_remove_receive() returns 0.
-*/
-#if defined(MIPS) || defined(nx6000) || defined(drs6000) || defined(UWsparc)
-# define can_remove_receive(PacketP,PortP) \
- ((RINDW(PortP->RxRemove) & PKT_IN_USE) ? \
- (PacketP=(struct PKT *)RIO_PTR(CaD,(RINDW(PortP->RxRemove) & ~PKT_IN_USE))):0)
-#elif defined(AIX)
-# define can_remove_receive(PacketP,PortP) \
- ((RINDW((ushort *)RIO_PTR(Cad,PortP->RxRemoveO)) & PKT_IN_USE) ? \
- (PacketP=(struct PKT *)RIO_PTR(Cad,RINDW((ushort *)RIO_PTR(Cad,PortP->RxRemoveO)) & ~PKT_IN_USE)):0)
-#else
-# define can_remove_receive(PacketP,PortP) \
- ((*PortP->RxRemove & PKT_IN_USE) ? \
- (PacketP=(struct PKT *)RIO_PTR(CaD,(*PortP->RxRemove & ~PKT_IN_USE))):0)
-#endif
-
-
-/*
-** Will God see it within his heart to forgive us for this thing that
-** we have created? To remove a packet from the receive queue you clear
-** its PKT_IN_USE bit, and then bump the pointers. Once the pointers
-** get to the end, they must be wrapped back to the start.
-*/
-#if defined(MIPS) || defined(nx6000) || defined(drs6000) || defined(UWsparc)
-# define remove_receive(PortP) \
- WINDW(PortP->RxRemove, (RINDW(PortP->RxRemove) & ~PKT_IN_USE));\
- if (PortP->RxRemove == PortP->RxEnd)\
- PortP->RxRemove = PortP->RxStart;\
- else\
- PortP->RxRemove++;\
- WWORD(PortP->PhbP->rx_remove , RIO_OFF(CaD,PortP->RxRemove));
-#elif defined(AIX)
-# define remove_receive(PortP) \
- {\
- register ushort *RxRemoveP = (ushort *)RIO_PTR(Cad,PortP->RxRemoveO);\
- WINDW( RxRemoveP, RINDW( RxRemoveP ) & ~PKT_IN_USE );\
- if (PortP->RxRemoveO == PortP->RxEndO)\
- PortP->RxRemoveO = PortP->RxStartO;\
- else\
- PortP->RxRemoveO += sizeof(ushort);\
- WWORD(((PHB *)RIO_PTR(Cad,PortP->PhbO))->rx_remove, PortP->RxRemoveO );\
- }
-#else
-# define remove_receive(PortP) \
- *PortP->RxRemove &= ~PKT_IN_USE;\
- if (PortP->RxRemove == PortP->RxEnd)\
- PortP->RxRemove = PortP->RxStart;\
- else\
- PortP->RxRemove++;\
- PortP->PhbP->rx_remove = RIO_OFF(CaD,PortP->RxRemove);
-#endif
-#endif
-
-
-#else /* !IN_KERNEL */
-
-#define ZERO_PTR NULL
-
-
-#ifdef HOST
-/* #define can_remove_transmit(pkt,phb) ((((char*)pkt = (*(char**)(phb->tx_remove))-1) || 1)) && (*phb->u3.s2.tx_remove_ptr & PKT_IN_USE)) */
-#define remove_transmit(phb) *phb->u3.s2.tx_remove_ptr &= ~(ushort)PKT_IN_USE;\
- if (phb->tx_remove == phb->tx_end)\
- phb->tx_remove = phb->tx_start;\
- else\
- phb->tx_remove++;
-#define can_add_receive(phb) !(*phb->u4.s2.rx_add_ptr & PKT_IN_USE)
-#define add_receive(pkt,phb) *phb->rx_add = pkt;\
- *phb->u4.s2.rx_add_ptr |= PKT_IN_USE;\
- if (phb->rx_add == phb->rx_end)\
- phb->rx_add = phb->rx_start;\
- else\
- phb->rx_add++;
-#endif
-#endif
-
-#ifdef RTA
-#define splx(oldspl) if ((oldspl) == 0) spl0()
-#endif
-
#endif /* ifndef _list.h */
/*********** end of file ***********/
diff --git a/drivers/char/rio/parmmap.h b/drivers/char/rio/parmmap.h
index fe4e005..e24acc1 100644
--- a/drivers/char/rio/parmmap.h
+++ b/drivers/char/rio/parmmap.h
@@ -78,14 +78,9 @@
WORD idle_count; /* Idle time counter */
WORD busy_count; /* Busy counter */
WORD idle_control; /* Control Idle Process */
-#if defined(HOST) || defined(INKERNEL)
WORD tx_intr; /* TX interrupt pending */
WORD rx_intr; /* RX interrupt pending */
WORD rup_intr; /* RUP interrupt pending */
-#endif
-#if defined(RTA)
- WORD dying_count; /* Count of processes dead */
-#endif
};
#endif
diff --git a/drivers/char/rio/phb.h b/drivers/char/rio/phb.h
index 3baebf8..2663ca0 100644
--- a/drivers/char/rio/phb.h
+++ b/drivers/char/rio/phb.h
@@ -44,17 +44,6 @@
#endif
- /*************************************************
- * Set the LIMIT values.
- ************************************************/
-#ifdef RTA
-#define RX_LIMIT (ushort) 3
-#endif
-#ifdef HOST
-#define RX_LIMIT (ushort) 1
-#endif
-
-
/*************************************************
* Handshake asserted. Deasserted by the LTT(s)
************************************************/
@@ -69,11 +58,7 @@
/*************************************************
* Maximum number of PHB's
************************************************/
-#if defined (HOST) || defined (INKERNEL)
#define MAX_PHB ((ushort) 128) /* range 0-127 */
-#else
-#define MAX_PHB ((ushort) 8) /* range 0-7 */
-#endif
/*************************************************
* Defines for the mode fields
@@ -139,141 +124,23 @@
* the start. The pointer tx_add points to a SPACE to put a Packet.
* The pointer tx_remove points to the next Packet to remove
*************************************************************************/
-#ifndef INKERNEL
-#define src_unit u2.s2.unit
-#define src_port u2.s2.port
-#define dest_unit u1.s1.unit
-#define dest_port u1.s1.port
-#endif
-#ifdef HOST
-#define tx_start u3.s1.tx_start_ptr_ptr
-#define tx_add u3.s1.tx_add_ptr_ptr
-#define tx_end u3.s1.tx_end_ptr_ptr
-#define tx_remove u3.s1.tx_remove_ptr_ptr
-#define rx_start u4.s1.rx_start_ptr_ptr
-#define rx_add u4.s1.rx_add_ptr_ptr
-#define rx_end u4.s1.rx_end_ptr_ptr
-#define rx_remove u4.s1.rx_remove_ptr_ptr
-#endif
typedef struct PHB PHB;
struct PHB {
-#ifdef RTA
- ushort port;
-#endif
-#ifdef INKERNEL
WORD source;
-#else
- union {
- ushort source; /* Complete source */
- struct {
- unsigned char unit; /* Source unit */
- unsigned char port; /* Source port */
- } s2;
- } u2;
-#endif
WORD handshake;
WORD status;
NUMBER timeout; /* Maximum of 1.9 seconds */
WORD link; /* Send down this link */
-#ifdef INKERNEL
WORD destination;
-#else
- union {
- ushort destination; /* Complete destination */
- struct {
- unsigned char unit; /* Destination unit */
- unsigned char port; /* Destination port */
- } s1;
- } u1;
-#endif
-#ifdef RTA
- ushort tx_pkts_added;
- ushort tx_pkts_removed;
- Q_BUF_ptr tx_q_start; /* Start of the Q list chain */
- short num_tx_q_bufs; /* Number of Q buffers in the chain */
- PKT_ptr_ptr tx_add; /* Add a new Packet here */
- Q_BUF_ptr tx_add_qb; /* Pointer to the add Q buf */
- PKT_ptr_ptr tx_add_st_qbb; /* Pointer to start of the Q's buf */
- PKT_ptr_ptr tx_add_end_qbb; /* Pointer to the end of the Q's buf */
- PKT_ptr_ptr tx_remove; /* Remove a Packet here */
- Q_BUF_ptr tx_remove_qb; /* Pointer to the remove Q buf */
- PKT_ptr_ptr tx_remove_st_qbb; /* Pointer to the start of the Q buf */
- PKT_ptr_ptr tx_remove_end_qbb; /* Pointer to the end of the Q buf */
-#endif
-#ifdef INKERNEL
PKT_ptr_ptr tx_start;
PKT_ptr_ptr tx_end;
PKT_ptr_ptr tx_add;
PKT_ptr_ptr tx_remove;
-#endif
-#ifdef HOST
- union {
- struct {
- PKT_ptr_ptr tx_start_ptr_ptr;
- PKT_ptr_ptr tx_end_ptr_ptr;
- PKT_ptr_ptr tx_add_ptr_ptr;
- PKT_ptr_ptr tx_remove_ptr_ptr;
- } s1;
- struct {
- ushort *tx_start_ptr;
- ushort *tx_end_ptr;
- ushort *tx_add_ptr;
- ushort *tx_remove_ptr;
- } s2;
- } u3;
-#endif
-#ifdef RTA
- ushort rx_pkts_added;
- ushort rx_pkts_removed;
- Q_BUF_ptr rx_q_start; /* Start of the Q list chain */
- short num_rx_q_bufs; /* Number of Q buffers in the chain */
- PKT_ptr_ptr rx_add; /* Add a new Packet here */
- Q_BUF_ptr rx_add_qb; /* Pointer to the add Q buf */
- PKT_ptr_ptr rx_add_st_qbb; /* Pointer to start of the Q's buf */
- PKT_ptr_ptr rx_add_end_qbb; /* Pointer to the end of the Q's buf */
- PKT_ptr_ptr rx_remove; /* Remove a Packet here */
- Q_BUF_ptr rx_remove_qb; /* Pointer to the remove Q buf */
- PKT_ptr_ptr rx_remove_st_qbb; /* Pointer to the start of the Q buf */
- PKT_ptr_ptr rx_remove_end_qbb; /* Pointer to the end of the Q buf */
-#endif
-#ifdef INKERNEL
PKT_ptr_ptr rx_start;
PKT_ptr_ptr rx_end;
PKT_ptr_ptr rx_add;
PKT_ptr_ptr rx_remove;
-#endif
-#ifdef HOST
- union {
- struct {
- PKT_ptr_ptr rx_start_ptr_ptr;
- PKT_ptr_ptr rx_end_ptr_ptr;
- PKT_ptr_ptr rx_add_ptr_ptr;
- PKT_ptr_ptr rx_remove_ptr_ptr;
- } s1;
- struct {
- ushort *rx_start_ptr;
- ushort *rx_end_ptr;
- ushort *rx_add_ptr;
- ushort *rx_remove_ptr;
- } s2;
- } u4;
-#endif
-
-#ifdef RTA /* some fields for the remotes */
- ushort flush_count; /* Count of write flushes */
- ushort txmode; /* Modes for tx */
- ushort rxmode; /* Modes for rx */
- ushort portmode; /* Generic modes */
- ushort column; /* TAB3 column count */
- ushort tx_subscript; /* (TX) Subscript into data field */
- ushort rx_subscript; /* (RX) Subscript into data field */
- PKT_ptr rx_incomplete; /* Hold an incomplete packet here */
- ushort modem_bits; /* Modem bits to mask */
- ushort lastModem; /* Modem control lines. */
- ushort addr; /* Address for sub commands */
- ushort MonitorTstate; /* TRUE if monitoring tstop */
-#endif
};
diff --git a/drivers/char/rio/pkt.h b/drivers/char/rio/pkt.h
index 882fd42..7011e52 100644
--- a/drivers/char/rio/pkt.h
+++ b/drivers/char/rio/pkt.h
@@ -70,39 +70,12 @@
#define CONTROL_DATA_WNDW (DATA_WNDW << 8)
struct PKT {
-#ifdef INKERNEL
BYTE dest_unit; /* Destination Unit Id */
BYTE dest_port; /* Destination POrt */
BYTE src_unit; /* Source Unit Id */
BYTE src_port; /* Source POrt */
-#else
- union {
- ushort destination; /* Complete destination */
- struct {
- unsigned char unit; /* Destination unit */
- unsigned char port; /* Destination port */
- } s1;
- } u1;
- union {
- ushort source; /* Complete source */
- struct {
- unsigned char unit; /* Source unit */
- unsigned char port; /* Source port */
- } s2;
- } u2;
-#endif
-#ifdef INKERNEL
BYTE len;
BYTE control;
-#else
- union {
- ushort control;
- struct {
- unsigned char len;
- unsigned char control;
- } s3;
- } u3;
-#endif
BYTE data[PKT_MAX_DATA_LEN];
/* Actual data :-) */
WORD csum; /* C-SUM */
diff --git a/drivers/char/rio/qbuf.h b/drivers/char/rio/qbuf.h
index acd9e8e..391ffc3 100644
--- a/drivers/char/rio/qbuf.h
+++ b/drivers/char/rio/qbuf.h
@@ -46,11 +46,7 @@
-#ifdef HOST
-#define PKTS_PER_BUFFER 1
-#else
#define PKTS_PER_BUFFER (220 / PKT_LENGTH)
-#endif
typedef struct Q_BUF Q_BUF;
struct Q_BUF {
diff --git a/drivers/char/rio/riotypes.h b/drivers/char/rio/riotypes.h
index 9b67e24..46084d5 100644
--- a/drivers/char/rio/riotypes.h
+++ b/drivers/char/rio/riotypes.h
@@ -43,9 +43,6 @@
#endif
#endif
-#ifdef INKERNEL
-
-#if !defined(MIPSAT)
typedef unsigned short NUMBER_ptr;
typedef unsigned short WORD_ptr;
typedef unsigned short BYTE_ptr;
@@ -65,69 +62,6 @@
typedef unsigned short short_ptr;
typedef unsigned short u_short_ptr;
typedef unsigned short ushort_ptr;
-#else
-/* MIPSAT types */
-typedef char RIO_POINTER[8];
-typedef RIO_POINTER NUMBER_ptr;
-typedef RIO_POINTER WORD_ptr;
-typedef RIO_POINTER BYTE_ptr;
-typedef RIO_POINTER char_ptr;
-typedef RIO_POINTER Channel_ptr;
-typedef RIO_POINTER FREE_LIST_ptr_ptr;
-typedef RIO_POINTER FREE_LIST_ptr;
-typedef RIO_POINTER LPB_ptr;
-typedef RIO_POINTER Process_ptr;
-typedef RIO_POINTER PHB_ptr;
-typedef RIO_POINTER PKT_ptr;
-typedef RIO_POINTER PKT_ptr_ptr;
-typedef RIO_POINTER Q_BUF_ptr;
-typedef RIO_POINTER Q_BUF_ptr_ptr;
-typedef RIO_POINTER ROUTE_STR_ptr;
-typedef RIO_POINTER RUP_ptr;
-typedef RIO_POINTER short_ptr;
-typedef RIO_POINTER u_short_ptr;
-typedef RIO_POINTER ushort_ptr;
-#endif
-
-#else /* not INKERNEL */
-typedef unsigned char BYTE;
-typedef unsigned short WORD;
-typedef unsigned long DWORD;
-typedef short NUMBER;
-typedef short *NUMBER_ptr;
-typedef unsigned short *WORD_ptr;
-typedef unsigned char *BYTE_ptr;
-typedef unsigned char uchar;
-typedef unsigned short ushort;
-typedef unsigned int uint;
-typedef unsigned long ulong;
-typedef unsigned char u_char;
-typedef unsigned short u_short;
-typedef unsigned int u_int;
-typedef unsigned long u_long;
-typedef unsigned short ERROR;
-typedef unsigned long ID;
-typedef char *char_ptr;
-typedef Channel *Channel_ptr;
-typedef struct FREE_LIST *FREE_LIST_ptr;
-typedef struct FREE_LIST **FREE_LIST_ptr_ptr;
-typedef struct LPB *LPB_ptr;
-typedef struct Process *Process_ptr;
-typedef struct PHB *PHB_ptr;
-typedef struct PKT *PKT_ptr;
-typedef struct PKT **PKT_ptr_ptr;
-typedef struct Q_BUF *Q_BUF_ptr;
-typedef struct Q_BUF **Q_BUF_ptr_ptr;
-typedef struct ROUTE_STR *ROUTE_STR_ptr;
-typedef struct RUP *RUP_ptr;
-typedef short *short_ptr;
-typedef u_short *u_short_ptr;
-typedef ushort *ushort_ptr;
-typedef struct PKT PKT;
-typedef struct LPB LPB;
-typedef struct RUP RUP;
-#endif
-
#endif /* __riotypes__ */
diff --git a/drivers/char/rio/rup.h b/drivers/char/rio/rup.h
index 8d44fec..f74f67c 100644
--- a/drivers/char/rio/rup.h
+++ b/drivers/char/rio/rup.h
@@ -43,12 +43,7 @@
#endif
#endif
-#if defined( HOST ) || defined( INKERNEL )
#define MAX_RUP ((short) 16)
-#endif
-#ifdef RTA
-#define MAX_RUP ((short) 1)
-#endif
#define PKTS_PER_RUP ((short) 2) /* They are always used in pairs */
diff --git a/drivers/char/rio/sam.h b/drivers/char/rio/sam.h
index 3149405..6f754e1 100644
--- a/drivers/char/rio/sam.h
+++ b/drivers/char/rio/sam.h
@@ -43,10 +43,6 @@
#endif
-#if !defined( HOST ) && !defined( INKERNEL )
-#define RTA 1
-#endif
-
#define NUM_FREE_LIST_UNITS 500
#ifndef FALSE
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 0949dce..7edc6a4 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -433,7 +433,7 @@
count += ToRecv;
}
/* Push the data up to the tty layer */
- ld->receive_buf(tty, cbuf, fbuf, count);
+ ld->receive_buf(tty, chead, fhead, count);
done:
tty_ldisc_deref(ld);
}
diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c
index 80a5b84..fee68cc 100644
--- a/drivers/char/ser_a2232.c
+++ b/drivers/char/ser_a2232.c
@@ -103,6 +103,7 @@
#include <linux/serial.h>
#include <linux/generic_serial.h>
+#include <linux/tty_flip.h>
#include "ser_a2232.h"
#include "ser_a2232fw.h"
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index 64bf89c..c2490e2 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -931,7 +931,7 @@
case CS6:sx_write_channel_byte (port, hi_mask, 0x3f);break;
case CS5:sx_write_channel_byte (port, hi_mask, 0x1f);break;
default:
- printk (KERN_INFO "sx: Invalid wordsize: %d\n", CFLAG & CSIZE);
+ printk (KERN_INFO "sx: Invalid wordsize: %u\n", CFLAG & CSIZE);
break;
}
@@ -958,7 +958,7 @@
} else {
set_bit(TTY_HW_COOK_IN, &port->gs.tty->flags);
}
- sx_dprintk (SX_DEBUG_TERMIOS, "iflags: %x(%d) ",
+ sx_dprintk (SX_DEBUG_TERMIOS, "iflags: %x(%d) ",
port->gs.tty->termios->c_iflag,
I_OTHER(port->gs.tty));
@@ -973,7 +973,7 @@
} else {
clear_bit(TTY_HW_COOK_OUT, &port->gs.tty->flags);
}
- sx_dprintk (SX_DEBUG_TERMIOS, "oflags: %x(%d)\n",
+ sx_dprintk (SX_DEBUG_TERMIOS, "oflags: %x(%d)\n",
port->gs.tty->termios->c_oflag,
O_OTHER(port->gs.tty));
/* port->c_dcd = sx_get_CD (port); */
diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c
index aedf7a8..537aa45 100644
--- a/drivers/char/tpm/tpm_bios.c
+++ b/drivers/char/tpm/tpm_bios.c
@@ -191,7 +191,7 @@
const char *name = "";
char data[40] = "";
int i, n_len = 0, d_len = 0;
- u32 event_id, event_data_size;
+ u32 event_id;
switch(event->event_type) {
case PREBOOT:
@@ -220,8 +220,7 @@
}
break;
case EVENT_TAG:
- event_id = be32_to_cpu(event_entry);
- event_data_size = be32_to_cpu(&event_entry[4]);
+ event_id = be32_to_cpu(*((u32 *)event_entry));
/* ToDo Row data -> Base64 */
@@ -376,7 +375,7 @@
{
struct acpi_tcpa *buff;
acpi_status status;
- void *virt;
+ struct acpi_table_header *virt;
if (log->bios_event_log != NULL) {
printk(KERN_ERR
@@ -413,7 +412,7 @@
log->bios_event_log_end = log->bios_event_log + buff->log_max_len;
- acpi_os_map_memory(buff->log_start_addr, buff->log_max_len, &virt);
+ acpi_os_map_memory(buff->log_start_addr, buff->log_max_len, (void *) &virt);
memcpy(log->bios_event_log, virt, buff->log_max_len);
@@ -487,26 +486,35 @@
.release = tpm_bios_measurements_release,
};
+static int is_bad(void *p)
+{
+ if (!p)
+ return 1;
+ if (IS_ERR(p) && (PTR_ERR(p) != -ENODEV))
+ return 1;
+ return 0;
+}
+
struct dentry **tpm_bios_log_setup(char *name)
{
struct dentry **ret = NULL, *tpm_dir, *bin_file, *ascii_file;
tpm_dir = securityfs_create_dir(name, NULL);
- if (!tpm_dir)
+ if (is_bad(tpm_dir))
goto out;
bin_file =
securityfs_create_file("binary_bios_measurements",
S_IRUSR | S_IRGRP, tpm_dir, NULL,
&tpm_binary_bios_measurements_ops);
- if (!bin_file)
+ if (is_bad(bin_file))
goto out_tpm;
ascii_file =
securityfs_create_file("ascii_bios_measurements",
S_IRUSR | S_IRGRP, tpm_dir, NULL,
&tpm_ascii_bios_measurements_ops);
- if (!ascii_file)
+ if (is_bad(ascii_file))
goto out_bin;
ret = kmalloc(3 * sizeof(struct dentry *), GFP_KERNEL);
@@ -538,3 +546,4 @@
securityfs_remove(lst[i]);
}
EXPORT_SYMBOL_GPL(tpm_bios_log_teardown);
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index 8198dbb..ec75909 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -441,7 +441,7 @@
if ((ioh << 8 | iol) != tpm_inf.base) {
dev_err(&dev->dev,
- "Could not set IO-ports to %04x\n",
+ "Could not set IO-ports to 0x%lx\n",
tpm_inf.base);
release_region(tpm_inf.base, TPM_INF_PORT_LEN);
return -EIO;
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index eb8b5be..076e07c 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -253,6 +253,7 @@
static void tty_buffer_init(struct tty_struct *tty)
{
+ spin_lock_init(&tty->buf.lock);
tty->buf.head = NULL;
tty->buf.tail = NULL;
tty->buf.free = NULL;
@@ -266,6 +267,7 @@
p->used = 0;
p->size = size;
p->next = NULL;
+ p->active = 0;
p->char_buf_ptr = (char *)(p->data);
p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
/* printk("Flip create %p\n", p); */
@@ -312,25 +314,36 @@
int tty_buffer_request_room(struct tty_struct *tty, size_t size)
{
- struct tty_buffer *b = tty->buf.tail, *n;
- int left = 0;
+ struct tty_buffer *b, *n;
+ int left;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tty->buf.lock, flags);
/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
remove this conditional if its worth it. This would be invisible
to the callers */
- if(b != NULL)
+ if ((b = tty->buf.tail) != NULL) {
left = b->size - b->used;
- if(left >= size)
- return size;
- /* This is the slow path - looking for new buffers to use */
- n = tty_buffer_find(tty, size);
- if(n == NULL)
- return left;
- if(b != NULL)
- b->next = n;
- else
- tty->buf.head = n;
- tty->buf.tail = n;
+ b->active = 1;
+ } else
+ left = 0;
+
+ if (left < size) {
+ /* This is the slow path - looking for new buffers to use */
+ if ((n = tty_buffer_find(tty, size)) != NULL) {
+ if (b != NULL) {
+ b->next = n;
+ b->active = 0;
+ } else
+ tty->buf.head = n;
+ tty->buf.tail = n;
+ n->active = 1;
+ } else
+ size = left;
+ }
+
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
return size;
}
@@ -396,10 +409,12 @@
int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_t size)
{
int space = tty_buffer_request_room(tty, size);
- struct tty_buffer *tb = tty->buf.tail;
- *chars = tb->char_buf_ptr + tb->used;
- memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
- tb->used += space;
+ if (likely(space)) {
+ struct tty_buffer *tb = tty->buf.tail;
+ *chars = tb->char_buf_ptr + tb->used;
+ memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
+ tb->used += space;
+ }
return space;
}
@@ -416,10 +431,12 @@
int tty_prepare_flip_string_flags(struct tty_struct *tty, unsigned char **chars, char **flags, size_t size)
{
int space = tty_buffer_request_room(tty, size);
- struct tty_buffer *tb = tty->buf.tail;
- *chars = tb->char_buf_ptr + tb->used;
- *flags = tb->flag_buf_ptr + tb->used;
- tb->used += space;
+ if (likely(space)) {
+ struct tty_buffer *tb = tty->buf.tail;
+ *chars = tb->char_buf_ptr + tb->used;
+ *flags = tb->flag_buf_ptr + tb->used;
+ tb->used += space;
+ }
return space;
}
@@ -2747,20 +2764,20 @@
schedule_delayed_work(&tty->buf.work, 1);
goto out;
}
- spin_lock_irqsave(&tty->read_lock, flags);
- while((tbuf = tty->buf.head) != NULL) {
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ while((tbuf = tty->buf.head) != NULL && !tbuf->active) {
tty->buf.head = tbuf->next;
if (tty->buf.head == NULL)
tty->buf.tail = NULL;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
/* printk("Process buffer %p for %d\n", tbuf, tbuf->used); */
disc->receive_buf(tty, tbuf->char_buf_ptr,
tbuf->flag_buf_ptr,
tbuf->used);
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&tty->buf.lock, flags);
tty_buffer_free(tty, tbuf);
}
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
out:
tty_ldisc_deref(disc);
}
@@ -2852,6 +2869,12 @@
void tty_flip_buffer_push(struct tty_struct *tty)
{
+ unsigned long flags;
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ if (tty->buf.tail != NULL)
+ tty->buf.tail->active = 0;
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+
if (tty->low_latency)
flush_to_ldisc((void *) tty);
else
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index f1d9cb7..0900d1d 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -3213,6 +3213,7 @@
void putconsxy(struct vc_data *vc, unsigned char *p)
{
+ hide_cursor(vc);
gotoxy(vc, p[0], p[1]);
set_cursor(vc);
}
diff --git a/drivers/char/watchdog/sbc_epx_c3.c b/drivers/char/watchdog/sbc_epx_c3.c
index 9517646..837b1ec3 100644
--- a/drivers/char/watchdog/sbc_epx_c3.c
+++ b/drivers/char/watchdog/sbc_epx_c3.c
@@ -25,6 +25,7 @@
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/init.h>
+#include <linux/ioport.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -91,7 +92,7 @@
return 0;
}
-static ssize_t epx_c3_write(struct file *file, const char *data,
+static ssize_t epx_c3_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
/* Refresh the timer. */
@@ -104,6 +105,7 @@
unsigned int cmd, unsigned long arg)
{
int options, retval = -EINVAL;
+ int __user *argp = (void __user *)arg;
static struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE,
@@ -113,20 +115,19 @@
switch (cmd) {
case WDIOC_GETSUPPORT:
- if (copy_to_user((struct watchdog_info *)arg,
- &ident, sizeof(ident)))
+ if (copy_to_user(argp, &ident, sizeof(ident)))
return -EFAULT;
return 0;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
- return put_user(0,(int *)arg);
+ return put_user(0, argp);
case WDIOC_KEEPALIVE:
epx_c3_pet();
return 0;
case WDIOC_GETTIMEOUT:
- return put_user(WATCHDOG_TIMEOUT,(int *)arg);
- case WDIOC_SETOPTIONS: {
- if (get_user(options, (int *)arg))
+ return put_user(WATCHDOG_TIMEOUT, argp);
+ case WDIOC_SETOPTIONS:
+ if (get_user(options, argp))
return -EFAULT;
if (options & WDIOS_DISABLECARD) {
@@ -140,7 +141,6 @@
}
return retval;
- }
default:
return -ENOIOCTLCMD;
}
@@ -181,11 +181,14 @@
{
int ret;
+ if (!request_region(EPXC3_WATCHDOG_CTL_REG, 2, "epxc3_watchdog"))
+ return -EBUSY;
+
ret = register_reboot_notifier(&epx_c3_notifier);
if (ret) {
printk(KERN_ERR PFX "cannot register reboot notifier "
"(err=%d)\n", ret);
- return ret;
+ goto out;
}
ret = misc_register(&epx_c3_miscdev);
@@ -193,18 +196,23 @@
printk(KERN_ERR PFX "cannot register miscdev on minor=%d "
"(err=%d)\n", WATCHDOG_MINOR, ret);
unregister_reboot_notifier(&epx_c3_notifier);
- return ret;
+ goto out;
}
printk(banner);
return 0;
+
+out:
+ release_region(EPXC3_WATCHDOG_CTL_REG, 2);
+ return ret;
}
static void __exit watchdog_exit(void)
{
misc_deregister(&epx_c3_miscdev);
unregister_reboot_notifier(&epx_c3_notifier);
+ release_region(EPXC3_WATCHDOG_CTL_REG, 2);
}
module_init(watchdog_init);
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 277a843..7a51147 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -26,6 +26,7 @@
#include <linux/slab.h>
#include <linux/cpu.h>
#include <linux/completion.h>
+#include <linux/mutex.h>
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "cpufreq-core", msg)
@@ -55,7 +56,7 @@
static LIST_HEAD(cpufreq_governor_list);
-static DECLARE_MUTEX (cpufreq_governor_sem);
+static DEFINE_MUTEX (cpufreq_governor_mutex);
struct cpufreq_policy * cpufreq_cpu_get(unsigned int cpu)
{
@@ -297,18 +298,18 @@
return -EINVAL;
} else {
struct cpufreq_governor *t;
- down(&cpufreq_governor_sem);
+ mutex_lock(&cpufreq_governor_mutex);
if (!cpufreq_driver || !cpufreq_driver->target)
goto out;
list_for_each_entry(t, &cpufreq_governor_list, governor_list) {
if (!strnicmp(str_governor,t->name,CPUFREQ_NAME_LEN)) {
*governor = t;
- up(&cpufreq_governor_sem);
+ mutex_unlock(&cpufreq_governor_mutex);
return 0;
}
}
out:
- up(&cpufreq_governor_sem);
+ mutex_unlock(&cpufreq_governor_mutex);
}
return -EINVAL;
}
@@ -600,7 +601,8 @@
policy->cpu = cpu;
policy->cpus = cpumask_of_cpu(cpu);
- init_MUTEX_LOCKED(&policy->lock);
+ mutex_init(&policy->lock);
+ mutex_lock(&policy->lock);
init_completion(&policy->kobj_unregister);
INIT_WORK(&policy->update, handle_update, (void *)(long)cpu);
@@ -610,6 +612,7 @@
ret = cpufreq_driver->init(policy);
if (ret) {
dprintk("initialization failed\n");
+ mutex_unlock(&policy->lock);
goto err_out;
}
@@ -621,9 +624,10 @@
strlcpy(policy->kobj.name, "cpufreq", KOBJ_NAME_LEN);
ret = kobject_register(&policy->kobj);
- if (ret)
+ if (ret) {
+ mutex_unlock(&policy->lock);
goto err_out_driver_exit;
-
+ }
/* set up files for this cpu device */
drv_attr = cpufreq_driver->attr;
while ((drv_attr) && (*drv_attr)) {
@@ -641,7 +645,7 @@
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
policy->governor = NULL; /* to assure that the starting sequence is
* run in cpufreq_set_policy */
- up(&policy->lock);
+ mutex_unlock(&policy->lock);
/* set default policy */
@@ -762,10 +766,10 @@
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
#endif
- down(&data->lock);
+ mutex_lock(&data->lock);
if (cpufreq_driver->target)
__cpufreq_governor(data, CPUFREQ_GOV_STOP);
- up(&data->lock);
+ mutex_unlock(&data->lock);
kobject_unregister(&data->kobj);
@@ -834,9 +838,9 @@
unsigned int ret = 0;
if (policy) {
- down(&policy->lock);
+ mutex_lock(&policy->lock);
ret = policy->cur;
- up(&policy->lock);
+ mutex_unlock(&policy->lock);
cpufreq_cpu_put(policy);
}
@@ -862,7 +866,7 @@
if (!cpufreq_driver->get)
goto out;
- down(&policy->lock);
+ mutex_lock(&policy->lock);
ret = cpufreq_driver->get(cpu);
@@ -875,7 +879,7 @@
}
}
- up(&policy->lock);
+ mutex_unlock(&policy->lock);
out:
cpufreq_cpu_put(policy);
@@ -1158,11 +1162,11 @@
if (!policy)
return -EINVAL;
- down(&policy->lock);
+ mutex_lock(&policy->lock);
ret = __cpufreq_driver_target(policy, target_freq, relation);
- up(&policy->lock);
+ mutex_unlock(&policy->lock);
cpufreq_cpu_put(policy);
@@ -1199,9 +1203,9 @@
if (!policy)
return -EINVAL;
- down(&policy->lock);
+ mutex_lock(&policy->lock);
ret = __cpufreq_governor(policy, event);
- up(&policy->lock);
+ mutex_unlock(&policy->lock);
cpufreq_cpu_put(policy);
@@ -1217,17 +1221,17 @@
if (!governor)
return -EINVAL;
- down(&cpufreq_governor_sem);
+ mutex_lock(&cpufreq_governor_mutex);
list_for_each_entry(t, &cpufreq_governor_list, governor_list) {
if (!strnicmp(governor->name,t->name,CPUFREQ_NAME_LEN)) {
- up(&cpufreq_governor_sem);
+ mutex_unlock(&cpufreq_governor_mutex);
return -EBUSY;
}
}
list_add(&governor->governor_list, &cpufreq_governor_list);
- up(&cpufreq_governor_sem);
+ mutex_unlock(&cpufreq_governor_mutex);
return 0;
}
@@ -1239,9 +1243,9 @@
if (!governor)
return;
- down(&cpufreq_governor_sem);
+ mutex_lock(&cpufreq_governor_mutex);
list_del(&governor->governor_list);
- up(&cpufreq_governor_sem);
+ mutex_unlock(&cpufreq_governor_mutex);
return;
}
EXPORT_SYMBOL_GPL(cpufreq_unregister_governor);
@@ -1268,9 +1272,9 @@
if (!cpu_policy)
return -EINVAL;
- down(&cpu_policy->lock);
+ mutex_lock(&cpu_policy->lock);
memcpy(policy, cpu_policy, sizeof(struct cpufreq_policy));
- up(&cpu_policy->lock);
+ mutex_unlock(&cpu_policy->lock);
cpufreq_cpu_put(cpu_policy);
@@ -1382,7 +1386,7 @@
return -EINVAL;
/* lock this CPU */
- down(&data->lock);
+ mutex_lock(&data->lock);
ret = __cpufreq_set_policy(data, policy);
data->user_policy.min = data->min;
@@ -1390,7 +1394,7 @@
data->user_policy.policy = data->policy;
data->user_policy.governor = data->governor;
- up(&data->lock);
+ mutex_unlock(&data->lock);
cpufreq_cpu_put(data);
return ret;
@@ -1414,7 +1418,7 @@
if (!data)
return -ENODEV;
- down(&data->lock);
+ mutex_lock(&data->lock);
dprintk("updating policy for CPU %u\n", cpu);
memcpy(&policy,
@@ -1425,9 +1429,17 @@
policy.policy = data->user_policy.policy;
policy.governor = data->user_policy.governor;
+ /* BIOS might change freq behind our back
+ -> ask driver for current freq and notify governors about a change */
+ if (cpufreq_driver->get) {
+ policy.cur = cpufreq_driver->get(cpu);
+ if (data->cur != policy.cur)
+ cpufreq_out_of_sync(cpu, data->cur, policy.cur);
+ }
+
ret = __cpufreq_set_policy(data, &policy);
- up(&data->lock);
+ mutex_unlock(&data->lock);
cpufreq_cpu_put(data);
return ret;
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 39543a2..ac38766 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -28,7 +28,7 @@
#include <linux/jiffies.h>
#include <linux/kernel_stat.h>
#include <linux/percpu.h>
-
+#include <linux/mutex.h>
/*
* dbs is used in this file as a shortform for demandbased switching
* It helps to keep variable names smaller, simpler
@@ -71,7 +71,7 @@
static unsigned int dbs_enable; /* number of CPUs using this policy */
-static DECLARE_MUTEX (dbs_sem);
+static DEFINE_MUTEX (dbs_mutex);
static DECLARE_WORK (dbs_work, do_dbs_timer, NULL);
struct dbs_tuners {
@@ -139,9 +139,9 @@
if (ret != 1 )
return -EINVAL;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
dbs_tuners_ins.sampling_down_factor = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -153,14 +153,14 @@
int ret;
ret = sscanf (buf, "%u", &input);
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) {
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return -EINVAL;
}
dbs_tuners_ins.sampling_rate = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -172,16 +172,16 @@
int ret;
ret = sscanf (buf, "%u", &input);
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
input < MIN_FREQUENCY_UP_THRESHOLD ||
input <= dbs_tuners_ins.down_threshold) {
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return -EINVAL;
}
dbs_tuners_ins.up_threshold = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -193,16 +193,16 @@
int ret;
ret = sscanf (buf, "%u", &input);
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if (ret != 1 || input > MAX_FREQUENCY_DOWN_THRESHOLD ||
input < MIN_FREQUENCY_DOWN_THRESHOLD ||
input >= dbs_tuners_ins.up_threshold) {
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return -EINVAL;
}
dbs_tuners_ins.down_threshold = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -222,9 +222,9 @@
if ( input > 1 )
input = 1;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
dbs_tuners_ins.ignore_nice = input;
@@ -236,7 +236,7 @@
j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j);
j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up;
}
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -257,9 +257,9 @@
/* no need to test here if freq_step is zero as the user might actually
* want this, they would be crazy though :) */
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
dbs_tuners_ins.freq_step = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -444,12 +444,12 @@
static void do_dbs_timer(void *data)
{
int i;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
for_each_online_cpu(i)
dbs_check_cpu(i);
schedule_delayed_work(&dbs_work,
usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
}
static inline void dbs_timer_init(void)
@@ -487,7 +487,7 @@
if (this_dbs_info->enable) /* Already enabled */
break;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
for_each_cpu_mask(j, policy->cpus) {
struct cpu_dbs_info_s *j_dbs_info;
j_dbs_info = &per_cpu(cpu_dbs_info, j);
@@ -521,11 +521,11 @@
dbs_timer_init();
}
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
break;
case CPUFREQ_GOV_STOP:
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
this_dbs_info->enable = 0;
sysfs_remove_group(&policy->kobj, &dbs_attr_group);
dbs_enable--;
@@ -536,12 +536,12 @@
if (dbs_enable == 0)
dbs_timer_exit();
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
break;
case CPUFREQ_GOV_LIMITS:
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if (policy->max < this_dbs_info->cur_policy->cur)
__cpufreq_driver_target(
this_dbs_info->cur_policy,
@@ -550,7 +550,7 @@
__cpufreq_driver_target(
this_dbs_info->cur_policy,
policy->min, CPUFREQ_RELATION_L);
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
break;
}
return 0;
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index e69fd8d..9ee9411 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -27,6 +27,7 @@
#include <linux/jiffies.h>
#include <linux/kernel_stat.h>
#include <linux/percpu.h>
+#include <linux/mutex.h>
/*
* dbs is used in this file as a shortform for demandbased switching
@@ -70,7 +71,7 @@
static unsigned int dbs_enable; /* number of CPUs using this policy */
-static DECLARE_MUTEX (dbs_sem);
+static DEFINE_MUTEX (dbs_mutex);
static DECLARE_WORK (dbs_work, do_dbs_timer, NULL);
struct dbs_tuners {
@@ -136,9 +137,9 @@
if (input > MAX_SAMPLING_DOWN_FACTOR || input < 1)
return -EINVAL;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
dbs_tuners_ins.sampling_down_factor = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -150,14 +151,14 @@
int ret;
ret = sscanf (buf, "%u", &input);
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) {
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return -EINVAL;
}
dbs_tuners_ins.sampling_rate = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -169,15 +170,15 @@
int ret;
ret = sscanf (buf, "%u", &input);
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
input < MIN_FREQUENCY_UP_THRESHOLD) {
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return -EINVAL;
}
dbs_tuners_ins.up_threshold = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -197,9 +198,9 @@
if ( input > 1 )
input = 1;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
dbs_tuners_ins.ignore_nice = input;
@@ -211,7 +212,7 @@
j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j);
j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up;
}
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -356,12 +357,12 @@
static void do_dbs_timer(void *data)
{
int i;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
for_each_online_cpu(i)
dbs_check_cpu(i);
schedule_delayed_work(&dbs_work,
usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
}
static inline void dbs_timer_init(void)
@@ -399,7 +400,7 @@
if (this_dbs_info->enable) /* Already enabled */
break;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
for_each_cpu_mask(j, policy->cpus) {
struct cpu_dbs_info_s *j_dbs_info;
j_dbs_info = &per_cpu(cpu_dbs_info, j);
@@ -435,11 +436,11 @@
dbs_timer_init();
}
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
break;
case CPUFREQ_GOV_STOP:
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
this_dbs_info->enable = 0;
sysfs_remove_group(&policy->kobj, &dbs_attr_group);
dbs_enable--;
@@ -450,12 +451,12 @@
if (dbs_enable == 0)
dbs_timer_exit();
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
break;
case CPUFREQ_GOV_LIMITS:
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if (policy->max < this_dbs_info->cur_policy->cur)
__cpufreq_driver_target(
this_dbs_info->cur_policy,
@@ -464,7 +465,7 @@
__cpufreq_driver_target(
this_dbs_info->cur_policy,
policy->min, CPUFREQ_RELATION_L);
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
break;
}
return 0;
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index d32bf35..92a0be2 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -1,3 +1,4 @@
+
/*
* linux/drivers/cpufreq/cpufreq_userspace.c
*
@@ -21,6 +22,7 @@
#include <linux/types.h>
#include <linux/fs.h>
#include <linux/sysfs.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
@@ -33,9 +35,8 @@
static unsigned int cpu_cur_freq[NR_CPUS]; /* current CPU freq */
static unsigned int cpu_set_freq[NR_CPUS]; /* CPU freq desired by userspace */
static unsigned int cpu_is_managed[NR_CPUS];
-static struct cpufreq_policy current_policy[NR_CPUS];
-static DECLARE_MUTEX (userspace_sem);
+static DEFINE_MUTEX (userspace_mutex);
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "userspace", msg)
@@ -64,35 +65,34 @@
*
* Sets the CPU frequency to freq.
*/
-static int cpufreq_set(unsigned int freq, unsigned int cpu)
+static int cpufreq_set(unsigned int freq, struct cpufreq_policy *policy)
{
int ret = -EINVAL;
- dprintk("cpufreq_set for cpu %u, freq %u kHz\n", cpu, freq);
+ dprintk("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
- down(&userspace_sem);
- if (!cpu_is_managed[cpu])
+ mutex_lock(&userspace_mutex);
+ if (!cpu_is_managed[policy->cpu])
goto err;
- cpu_set_freq[cpu] = freq;
+ cpu_set_freq[policy->cpu] = freq;
- if (freq < cpu_min_freq[cpu])
- freq = cpu_min_freq[cpu];
- if (freq > cpu_max_freq[cpu])
- freq = cpu_max_freq[cpu];
+ if (freq < cpu_min_freq[policy->cpu])
+ freq = cpu_min_freq[policy->cpu];
+ if (freq > cpu_max_freq[policy->cpu])
+ freq = cpu_max_freq[policy->cpu];
/*
* We're safe from concurrent calls to ->target() here
- * as we hold the userspace_sem lock. If we were calling
+ * as we hold the userspace_mutex lock. If we were calling
* cpufreq_driver_target, a deadlock situation might occur:
- * A: cpufreq_set (lock userspace_sem) -> cpufreq_driver_target(lock policy->lock)
- * B: cpufreq_set_policy(lock policy->lock) -> __cpufreq_governor -> cpufreq_governor_userspace (lock userspace_sem)
+ * A: cpufreq_set (lock userspace_mutex) -> cpufreq_driver_target(lock policy->lock)
+ * B: cpufreq_set_policy(lock policy->lock) -> __cpufreq_governor -> cpufreq_governor_userspace (lock userspace_mutex)
*/
- ret = __cpufreq_driver_target(¤t_policy[cpu], freq,
- CPUFREQ_RELATION_L);
+ ret = __cpufreq_driver_target(policy, freq, CPUFREQ_RELATION_L);
err:
- up(&userspace_sem);
+ mutex_unlock(&userspace_mutex);
return ret;
}
@@ -113,7 +113,7 @@
if (ret != 1)
return -EINVAL;
- cpufreq_set(freq, policy->cpu);
+ cpufreq_set(freq, policy);
return count;
}
@@ -134,44 +134,48 @@
if (!cpu_online(cpu))
return -EINVAL;
BUG_ON(!policy->cur);
- down(&userspace_sem);
+ mutex_lock(&userspace_mutex);
cpu_is_managed[cpu] = 1;
cpu_min_freq[cpu] = policy->min;
cpu_max_freq[cpu] = policy->max;
cpu_cur_freq[cpu] = policy->cur;
cpu_set_freq[cpu] = policy->cur;
sysfs_create_file (&policy->kobj, &freq_attr_scaling_setspeed.attr);
- memcpy (¤t_policy[cpu], policy, sizeof(struct cpufreq_policy));
dprintk("managing cpu %u started (%u - %u kHz, currently %u kHz)\n", cpu, cpu_min_freq[cpu], cpu_max_freq[cpu], cpu_cur_freq[cpu]);
- up(&userspace_sem);
+ mutex_unlock(&userspace_mutex);
break;
case CPUFREQ_GOV_STOP:
- down(&userspace_sem);
+ mutex_lock(&userspace_mutex);
cpu_is_managed[cpu] = 0;
cpu_min_freq[cpu] = 0;
cpu_max_freq[cpu] = 0;
cpu_set_freq[cpu] = 0;
sysfs_remove_file (&policy->kobj, &freq_attr_scaling_setspeed.attr);
dprintk("managing cpu %u stopped\n", cpu);
- up(&userspace_sem);
+ mutex_unlock(&userspace_mutex);
break;
case CPUFREQ_GOV_LIMITS:
- down(&userspace_sem);
+ mutex_lock(&userspace_mutex);
+ dprintk("limit event for cpu %u: %u - %u kHz,"
+ "currently %u kHz, last set to %u kHz\n",
+ cpu, policy->min, policy->max,
+ cpu_cur_freq[cpu], cpu_set_freq[cpu]);
+ if (policy->max < cpu_set_freq[cpu]) {
+ __cpufreq_driver_target(policy, policy->max,
+ CPUFREQ_RELATION_H);
+ }
+ else if (policy->min > cpu_set_freq[cpu]) {
+ __cpufreq_driver_target(policy, policy->min,
+ CPUFREQ_RELATION_L);
+ }
+ else {
+ __cpufreq_driver_target(policy, cpu_set_freq[cpu],
+ CPUFREQ_RELATION_L);
+ }
cpu_min_freq[cpu] = policy->min;
cpu_max_freq[cpu] = policy->max;
- dprintk("limit event for cpu %u: %u - %u kHz, currently %u kHz, last set to %u kHz\n", cpu, cpu_min_freq[cpu], cpu_max_freq[cpu], cpu_cur_freq[cpu], cpu_set_freq[cpu]);
- if (policy->max < cpu_set_freq[cpu]) {
- __cpufreq_driver_target(¤t_policy[cpu], policy->max,
- CPUFREQ_RELATION_H);
- } else if (policy->min > cpu_set_freq[cpu]) {
- __cpufreq_driver_target(¤t_policy[cpu], policy->min,
- CPUFREQ_RELATION_L);
- } else {
- __cpufreq_driver_target(¤t_policy[cpu], cpu_set_freq[cpu],
- CPUFREQ_RELATION_L);
- }
- memcpy (¤t_policy[cpu], policy, sizeof(struct cpufreq_policy));
- up(&userspace_sem);
+ cpu_cur_freq[cpu] = policy->cur;
+ mutex_unlock(&userspace_mutex);
break;
}
return 0;
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 4819e7f..18a4556 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -11,7 +11,6 @@
config EDAC
tristate "EDAC core system error reporting"
depends on X86
- default y
help
EDAC is designed to report errors in the core system.
These are low-level errors that are reported in the CPU or
@@ -46,7 +45,7 @@
config EDAC_AMD76X
tristate "AMD 76x (760, 762, 768)"
- depends on EDAC_MM_EDAC && PCI
+ depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the AMD 76x
series of chipsets used with the Athlon processor.
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index 770a5a6..c454ded 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -1039,10 +1039,10 @@
static struct pci_driver e752x_driver = {
- name: BS_MOD_STR,
- probe: e752x_init_one,
- remove: __devexit_p(e752x_remove_one),
- id_table: e752x_pci_tbl,
+ .name = BS_MOD_STR,
+ .probe = e752x_init_one,
+ .remove = __devexit_p(e752x_remove_one),
+ .id_table = e752x_pci_tbl,
};
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 4be9bd0..b10ee46 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -14,7 +14,6 @@
#include <linux/config.h>
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/kernel.h>
diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c
index 009c08f..1991f94 100644
--- a/drivers/edac/i82875p_edac.c
+++ b/drivers/edac/i82875p_edac.c
@@ -159,7 +159,7 @@
struct i82875p_pvt {
struct pci_dev *ovrfl_pdev;
- void *ovrfl_window;
+ void __iomem *ovrfl_window;
};
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index c582959..7230d4e 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -113,6 +113,16 @@
This driver can also be built as a module. If so, the module
will be called ds1621.
+config SENSORS_F71805F
+ tristate "Fintek F71805F/FG"
+ depends on HWMON && EXPERIMENTAL
+ help
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F71805F/FG chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called f71805f.
+
config SENSORS_FSCHER
tristate "FSC Hermes"
depends on HWMON && I2C && EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 06d4a1d..fbdb8d9 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -18,6 +18,7 @@
obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
+obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_FSCHER) += fscher.o
obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o
obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
new file mode 100644
index 0000000..e029e0a
--- /dev/null
+++ b/drivers/hwmon/f71805f.c
@@ -0,0 +1,908 @@
+/*
+ * f71805f.c - driver for the Fintek F71805F/FG Super-I/O chip integrated
+ * hardware monitoring features
+ * Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
+ *
+ * The F71805F/FG is a LPC Super-I/O chip made by Fintek. It integrates
+ * complete hardware monitoring features: voltage, fan and temperature
+ * sensors, and manual and automatic fan speed control.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <asm/io.h>
+
+static struct platform_device *pdev;
+
+#define DRVNAME "f71805f"
+
+/*
+ * Super-I/O constants and functions
+ */
+
+#define F71805F_LD_HWM 0x04
+
+#define SIO_REG_LDSEL 0x07 /* Logical device select */
+#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
+#define SIO_REG_DEVREV 0x22 /* Device revision */
+#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */
+#define SIO_REG_ENABLE 0x30 /* Logical device enable */
+#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
+
+#define SIO_FINTEK_ID 0x1934
+#define SIO_F71805F_ID 0x0406
+
+static inline int
+superio_inb(int base, int reg)
+{
+ outb(reg, base);
+ return inb(base + 1);
+}
+
+static int
+superio_inw(int base, int reg)
+{
+ int val;
+ outb(reg++, base);
+ val = inb(base + 1) << 8;
+ outb(reg, base);
+ val |= inb(base + 1);
+ return val;
+}
+
+static inline void
+superio_select(int base, int ld)
+{
+ outb(SIO_REG_LDSEL, base);
+ outb(ld, base + 1);
+}
+
+static inline void
+superio_enter(int base)
+{
+ outb(0x87, base);
+ outb(0x87, base);
+}
+
+static inline void
+superio_exit(int base)
+{
+ outb(0xaa, base);
+}
+
+/*
+ * ISA constants
+ */
+
+#define REGION_LENGTH 2
+#define ADDR_REG_OFFSET 0
+#define DATA_REG_OFFSET 1
+
+static struct resource f71805f_resource __initdata = {
+ .flags = IORESOURCE_IO,
+};
+
+/*
+ * Registers
+ */
+
+/* in nr from 0 to 8 (8-bit values) */
+#define F71805F_REG_IN(nr) (0x10 + (nr))
+#define F71805F_REG_IN_HIGH(nr) (0x40 + 2 * (nr))
+#define F71805F_REG_IN_LOW(nr) (0x41 + 2 * (nr))
+/* fan nr from 0 to 2 (12-bit values, two registers) */
+#define F71805F_REG_FAN(nr) (0x20 + 2 * (nr))
+#define F71805F_REG_FAN_LOW(nr) (0x28 + 2 * (nr))
+#define F71805F_REG_FAN_CTRL(nr) (0x60 + 16 * (nr))
+/* temp nr from 0 to 2 (8-bit values) */
+#define F71805F_REG_TEMP(nr) (0x1B + (nr))
+#define F71805F_REG_TEMP_HIGH(nr) (0x54 + 2 * (nr))
+#define F71805F_REG_TEMP_HYST(nr) (0x55 + 2 * (nr))
+#define F71805F_REG_TEMP_MODE 0x01
+
+#define F71805F_REG_START 0x00
+/* status nr from 0 to 2 */
+#define F71805F_REG_STATUS(nr) (0x36 + (nr))
+
+/*
+ * Data structures and manipulation thereof
+ */
+
+struct f71805f_data {
+ unsigned short addr;
+ const char *name;
+ struct semaphore lock;
+ struct class_device *class_dev;
+
+ struct semaphore update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+ unsigned long last_limits; /* In jiffies */
+
+ /* Register values */
+ u8 in[9];
+ u8 in_high[9];
+ u8 in_low[9];
+ u16 fan[3];
+ u16 fan_low[3];
+ u8 fan_enabled; /* Read once at init time */
+ u8 temp[3];
+ u8 temp_high[3];
+ u8 temp_hyst[3];
+ u8 temp_mode;
+ u8 alarms[3];
+};
+
+static inline long in_from_reg(u8 reg)
+{
+ return (reg * 8);
+}
+
+/* The 2 least significant bits are not used */
+static inline u8 in_to_reg(long val)
+{
+ if (val <= 0)
+ return 0;
+ if (val >= 2016)
+ return 0xfc;
+ return (((val + 16) / 32) << 2);
+}
+
+/* in0 is downscaled by a factor 2 internally */
+static inline long in0_from_reg(u8 reg)
+{
+ return (reg * 16);
+}
+
+static inline u8 in0_to_reg(long val)
+{
+ if (val <= 0)
+ return 0;
+ if (val >= 4032)
+ return 0xfc;
+ return (((val + 32) / 64) << 2);
+}
+
+/* The 4 most significant bits are not used */
+static inline long fan_from_reg(u16 reg)
+{
+ reg &= 0xfff;
+ if (!reg || reg == 0xfff)
+ return 0;
+ return (1500000 / reg);
+}
+
+static inline u16 fan_to_reg(long rpm)
+{
+ /* If the low limit is set below what the chip can measure,
+ store the largest possible 12-bit value in the registers,
+ so that no alarm will ever trigger. */
+ if (rpm < 367)
+ return 0xfff;
+ return (1500000 / rpm);
+}
+
+static inline long temp_from_reg(u8 reg)
+{
+ return (reg * 1000);
+}
+
+static inline u8 temp_to_reg(long val)
+{
+ if (val < 0)
+ val = 0;
+ else if (val > 1000 * 0xff)
+ val = 0xff;
+ return ((val + 500) / 1000);
+}
+
+/*
+ * Device I/O access
+ */
+
+static u8 f71805f_read8(struct f71805f_data *data, u8 reg)
+{
+ u8 val;
+
+ down(&data->lock);
+ outb(reg, data->addr + ADDR_REG_OFFSET);
+ val = inb(data->addr + DATA_REG_OFFSET);
+ up(&data->lock);
+
+ return val;
+}
+
+static void f71805f_write8(struct f71805f_data *data, u8 reg, u8 val)
+{
+ down(&data->lock);
+ outb(reg, data->addr + ADDR_REG_OFFSET);
+ outb(val, data->addr + DATA_REG_OFFSET);
+ up(&data->lock);
+}
+
+/* It is important to read the MSB first, because doing so latches the
+ value of the LSB, so we are sure both bytes belong to the same value. */
+static u16 f71805f_read16(struct f71805f_data *data, u8 reg)
+{
+ u16 val;
+
+ down(&data->lock);
+ outb(reg, data->addr + ADDR_REG_OFFSET);
+ val = inb(data->addr + DATA_REG_OFFSET) << 8;
+ outb(++reg, data->addr + ADDR_REG_OFFSET);
+ val |= inb(data->addr + DATA_REG_OFFSET);
+ up(&data->lock);
+
+ return val;
+}
+
+static void f71805f_write16(struct f71805f_data *data, u8 reg, u16 val)
+{
+ down(&data->lock);
+ outb(reg, data->addr + ADDR_REG_OFFSET);
+ outb(val >> 8, data->addr + DATA_REG_OFFSET);
+ outb(++reg, data->addr + ADDR_REG_OFFSET);
+ outb(val & 0xff, data->addr + DATA_REG_OFFSET);
+ up(&data->lock);
+}
+
+static struct f71805f_data *f71805f_update_device(struct device *dev)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ int nr;
+
+ down(&data->update_lock);
+
+ /* Limit registers cache is refreshed after 60 seconds */
+ if (time_after(jiffies, data->last_updated + 60 * HZ)
+ || !data->valid) {
+ for (nr = 0; nr < 9; nr++) {
+ data->in_high[nr] = f71805f_read8(data,
+ F71805F_REG_IN_HIGH(nr));
+ data->in_low[nr] = f71805f_read8(data,
+ F71805F_REG_IN_LOW(nr));
+ }
+ for (nr = 0; nr < 3; nr++) {
+ if (data->fan_enabled & (1 << nr))
+ data->fan_low[nr] = f71805f_read16(data,
+ F71805F_REG_FAN_LOW(nr));
+ }
+ for (nr = 0; nr < 3; nr++) {
+ data->temp_high[nr] = f71805f_read8(data,
+ F71805F_REG_TEMP_HIGH(nr));
+ data->temp_hyst[nr] = f71805f_read8(data,
+ F71805F_REG_TEMP_HYST(nr));
+ }
+ data->temp_mode = f71805f_read8(data, F71805F_REG_TEMP_MODE);
+
+ data->last_limits = jiffies;
+ }
+
+ /* Measurement registers cache is refreshed after 1 second */
+ if (time_after(jiffies, data->last_updated + HZ)
+ || !data->valid) {
+ for (nr = 0; nr < 9; nr++) {
+ data->in[nr] = f71805f_read8(data,
+ F71805F_REG_IN(nr));
+ }
+ for (nr = 0; nr < 3; nr++) {
+ if (data->fan_enabled & (1 << nr))
+ data->fan[nr] = f71805f_read16(data,
+ F71805F_REG_FAN(nr));
+ }
+ for (nr = 0; nr < 3; nr++) {
+ data->temp[nr] = f71805f_read8(data,
+ F71805F_REG_TEMP(nr));
+ }
+ for (nr = 0; nr < 3; nr++) {
+ data->alarms[nr] = f71805f_read8(data,
+ F71805F_REG_STATUS(nr));
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ up(&data->update_lock);
+
+ return data;
+}
+
+/*
+ * Sysfs interface
+ */
+
+static ssize_t show_in0(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+
+ return sprintf(buf, "%ld\n", in0_from_reg(data->in[0]));
+}
+
+static ssize_t show_in0_max(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+
+ return sprintf(buf, "%ld\n", in0_from_reg(data->in_high[0]));
+}
+
+static ssize_t show_in0_min(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+
+ return sprintf(buf, "%ld\n", in0_from_reg(data->in_low[0]));
+}
+
+static ssize_t set_in0_max(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_high[0] = in0_to_reg(val);
+ f71805f_write8(data, F71805F_REG_IN_HIGH(0), data->in_high[0]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t set_in0_min(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_low[0] = in0_to_reg(val);
+ f71805f_write8(data, F71805F_REG_IN_LOW(0), data->in_low[0]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+static DEVICE_ATTR(in0_input, S_IRUGO, show_in0, NULL);
+static DEVICE_ATTR(in0_max, S_IRUGO| S_IWUSR, show_in0_max, set_in0_max);
+static DEVICE_ATTR(in0_min, S_IRUGO| S_IWUSR, show_in0_min, set_in0_min);
+
+static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", in_from_reg(data->in[nr]));
+}
+
+static ssize_t show_in_max(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", in_from_reg(data->in_high[nr]));
+}
+
+static ssize_t show_in_min(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", in_from_reg(data->in_low[nr]));
+}
+
+static ssize_t set_in_max(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_high[nr] = in_to_reg(val);
+ f71805f_write8(data, F71805F_REG_IN_HIGH(nr), data->in_high[nr]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t set_in_min(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_low[nr] = in_to_reg(val);
+ f71805f_write8(data, F71805F_REG_IN_LOW(nr), data->in_low[nr]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+#define sysfs_in(offset) \
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+ show_in, NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, set_in_max, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, set_in_min, offset)
+
+sysfs_in(1);
+sysfs_in(2);
+sysfs_in(3);
+sysfs_in(4);
+sysfs_in(5);
+sysfs_in(6);
+sysfs_in(7);
+sysfs_in(8);
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", fan_from_reg(data->fan[nr]));
+}
+
+static ssize_t show_fan_min(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", fan_from_reg(data->fan_low[nr]));
+}
+
+static ssize_t set_fan_min(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->fan_low[nr] = fan_to_reg(val);
+ f71805f_write16(data, F71805F_REG_FAN_LOW(nr), data->fan_low[nr]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+#define sysfs_fan(offset) \
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+ show_fan, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, set_fan_min, offset - 1)
+
+sysfs_fan(1);
+sysfs_fan(2);
+sysfs_fan(3);
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", temp_from_reg(data->temp[nr]));
+}
+
+static ssize_t show_temp_max(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", temp_from_reg(data->temp_high[nr]));
+}
+
+static ssize_t show_temp_hyst(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", temp_from_reg(data->temp_hyst[nr]));
+}
+
+static ssize_t show_temp_type(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ /* 3 is diode, 4 is thermistor */
+ return sprintf(buf, "%u\n", (data->temp_mode & (1 << nr)) ? 3 : 4);
+}
+
+static ssize_t set_temp_max(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_high[nr] = temp_to_reg(val);
+ f71805f_write8(data, F71805F_REG_TEMP_HIGH(nr), data->temp_high[nr]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t set_temp_hyst(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_hyst[nr] = temp_to_reg(val);
+ f71805f_write8(data, F71805F_REG_TEMP_HYST(nr), data->temp_hyst[nr]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+#define sysfs_temp(offset) \
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_temp, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
+ show_temp_max, set_temp_max, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
+ show_temp_hyst, set_temp_hyst, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO, \
+ show_temp_type, NULL, offset - 1)
+
+sysfs_temp(1);
+sysfs_temp(2);
+sysfs_temp(3);
+
+static ssize_t show_alarms_in(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+
+ return sprintf(buf, "%d\n", data->alarms[0] |
+ ((data->alarms[1] & 0x01) << 8));
+}
+
+static ssize_t show_alarms_fan(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+
+ return sprintf(buf, "%d\n", data->alarms[2] & 0x07);
+}
+
+static ssize_t show_alarms_temp(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+
+ return sprintf(buf, "%d\n", (data->alarms[1] >> 3) & 0x07);
+}
+
+static DEVICE_ATTR(alarms_in, S_IRUGO, show_alarms_in, NULL);
+static DEVICE_ATTR(alarms_fan, S_IRUGO, show_alarms_fan, NULL);
+static DEVICE_ATTR(alarms_temp, S_IRUGO, show_alarms_temp, NULL);
+
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", data->name);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+/*
+ * Device registration and initialization
+ */
+
+static void __devinit f71805f_init_device(struct f71805f_data *data)
+{
+ u8 reg;
+ int i;
+
+ reg = f71805f_read8(data, F71805F_REG_START);
+ if ((reg & 0x41) != 0x01) {
+ printk(KERN_DEBUG DRVNAME ": Starting monitoring "
+ "operations\n");
+ f71805f_write8(data, F71805F_REG_START, (reg | 0x01) & ~0x40);
+ }
+
+ /* Fan monitoring can be disabled. If it is, we won't be polling
+ the register values, and won't create the related sysfs files. */
+ for (i = 0; i < 3; i++) {
+ reg = f71805f_read8(data, F71805F_REG_FAN_CTRL(i));
+ if (!(reg & 0x80))
+ data->fan_enabled |= (1 << i);
+ }
+}
+
+static int __devinit f71805f_probe(struct platform_device *pdev)
+{
+ struct f71805f_data *data;
+ struct resource *res;
+ int err;
+
+ if (!(data = kzalloc(sizeof(struct f71805f_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Out of memory\n");
+ goto exit;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ data->addr = res->start;
+ init_MUTEX(&data->lock);
+ data->name = "f71805f";
+ init_MUTEX(&data->update_lock);
+
+ platform_set_drvdata(pdev, data);
+
+ data->class_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
+ goto exit_free;
+ }
+
+ /* Initialize the F71805F chip */
+ f71805f_init_device(data);
+
+ /* Register sysfs interface files */
+ device_create_file(&pdev->dev, &dev_attr_in0_input);
+ device_create_file(&pdev->dev, &dev_attr_in0_max);
+ device_create_file(&pdev->dev, &dev_attr_in0_min);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in1_input.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in2_input.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in3_input.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in4_input.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in5_input.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in6_input.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in7_input.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in8_input.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in1_max.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in2_max.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in3_max.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in4_max.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in5_max.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in6_max.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in7_max.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in8_max.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in1_min.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in2_min.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in3_min.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in4_min.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in5_min.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in6_min.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in7_min.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_in8_min.dev_attr);
+ if (data->fan_enabled & (1 << 0)) {
+ device_create_file(&pdev->dev,
+ &sensor_dev_attr_fan1_input.dev_attr);
+ device_create_file(&pdev->dev,
+ &sensor_dev_attr_fan1_min.dev_attr);
+ }
+ if (data->fan_enabled & (1 << 1)) {
+ device_create_file(&pdev->dev,
+ &sensor_dev_attr_fan2_input.dev_attr);
+ device_create_file(&pdev->dev,
+ &sensor_dev_attr_fan2_min.dev_attr);
+ }
+ if (data->fan_enabled & (1 << 2)) {
+ device_create_file(&pdev->dev,
+ &sensor_dev_attr_fan3_input.dev_attr);
+ device_create_file(&pdev->dev,
+ &sensor_dev_attr_fan3_min.dev_attr);
+ }
+ device_create_file(&pdev->dev,
+ &sensor_dev_attr_temp1_input.dev_attr);
+ device_create_file(&pdev->dev,
+ &sensor_dev_attr_temp2_input.dev_attr);
+ device_create_file(&pdev->dev,
+ &sensor_dev_attr_temp3_input.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_temp2_max.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_temp3_max.dev_attr);
+ device_create_file(&pdev->dev,
+ &sensor_dev_attr_temp1_max_hyst.dev_attr);
+ device_create_file(&pdev->dev,
+ &sensor_dev_attr_temp2_max_hyst.dev_attr);
+ device_create_file(&pdev->dev,
+ &sensor_dev_attr_temp3_max_hyst.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_temp1_type.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_temp2_type.dev_attr);
+ device_create_file(&pdev->dev, &sensor_dev_attr_temp3_type.dev_attr);
+ device_create_file(&pdev->dev, &dev_attr_alarms_in);
+ device_create_file(&pdev->dev, &dev_attr_alarms_fan);
+ device_create_file(&pdev->dev, &dev_attr_alarms_temp);
+ device_create_file(&pdev->dev, &dev_attr_name);
+
+ return 0;
+
+exit_free:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int __devexit f71805f_remove(struct platform_device *pdev)
+{
+ struct f71805f_data *data = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ hwmon_device_unregister(data->class_dev);
+ kfree(data);
+
+ return 0;
+}
+
+static struct platform_driver f71805f_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRVNAME,
+ },
+ .probe = f71805f_probe,
+ .remove = __devexit_p(f71805f_remove),
+};
+
+static int __init f71805f_device_add(unsigned short address)
+{
+ int err;
+
+ pdev = platform_device_alloc(DRVNAME, address);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ goto exit;
+ }
+
+ f71805f_resource.start = address;
+ f71805f_resource.end = address + REGION_LENGTH - 1;
+ f71805f_resource.name = pdev->name;
+ err = platform_device_add_resources(pdev, &f71805f_resource, 1);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
+static int __init f71805f_find(int sioaddr, unsigned short *address)
+{
+ int err = -ENODEV;
+ u16 devid;
+
+ superio_enter(sioaddr);
+
+ devid = superio_inw(sioaddr, SIO_REG_MANID);
+ if (devid != SIO_FINTEK_ID)
+ goto exit;
+
+ devid = superio_inw(sioaddr, SIO_REG_DEVID);
+ if (devid != SIO_F71805F_ID) {
+ printk(KERN_INFO DRVNAME ": Unsupported Fintek device, "
+ "skipping\n");
+ goto exit;
+ }
+
+ superio_select(sioaddr, F71805F_LD_HWM);
+ if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
+ printk(KERN_WARNING DRVNAME ": Device not activated, "
+ "skipping\n");
+ goto exit;
+ }
+
+ *address = superio_inw(sioaddr, SIO_REG_ADDR);
+ if (*address == 0) {
+ printk(KERN_WARNING DRVNAME ": Base address not set, "
+ "skipping\n");
+ goto exit;
+ }
+
+ err = 0;
+ printk(KERN_INFO DRVNAME ": Found F71805F chip at %#x, revision %u\n",
+ *address, superio_inb(sioaddr, SIO_REG_DEVREV));
+
+exit:
+ superio_exit(sioaddr);
+ return err;
+}
+
+static int __init f71805f_init(void)
+{
+ int err;
+ unsigned short address;
+
+ if (f71805f_find(0x2e, &address)
+ && f71805f_find(0x4e, &address))
+ return -ENODEV;
+
+ err = platform_driver_register(&f71805f_driver);
+ if (err)
+ goto exit;
+
+ /* Sets global pdev as a side effect */
+ err = f71805f_device_add(address);
+ if (err)
+ goto exit_driver;
+
+ return 0;
+
+exit_driver:
+ platform_driver_unregister(&f71805f_driver);
+exit:
+ return err;
+}
+
+static void __exit f71805f_exit(void)
+{
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&f71805f_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("F71805F hardware monitoring driver");
+
+module_init(f71805f_init);
+module_exit(f71805f_exit);
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 0da7c9c..e87d52c 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -45,8 +45,7 @@
/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
- 0x2e, 0x2f, I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
static unsigned short isa_address;
/* Insmod parameters */
@@ -830,6 +829,11 @@
if ((err = i2c_attach_client(new_client)))
goto ERROR2;
+ if (!is_isa)
+ dev_info(&new_client->dev, "The I2C interface to IT87xxF "
+ "hardware monitoring chips is deprecated. Please "
+ "report if you still rely on it.\n");
+
/* Check PWM configuration */
enable_pwm_interface = it87_check_pwm(new_client);
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index a2f420d..df9e02a 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -87,15 +87,15 @@
/* In the temperature registers, the low 3 bits are not part of the
temperature values; they are the status bits. */
-static inline u16 LM77_TEMP_TO_REG(int temp)
+static inline s16 LM77_TEMP_TO_REG(int temp)
{
int ntemp = SENSORS_LIMIT(temp, LM77_TEMP_MIN, LM77_TEMP_MAX);
- return (u16)((ntemp / 500) * 8);
+ return (ntemp / 500) * 8;
}
-static inline int LM77_TEMP_FROM_REG(u16 reg)
+static inline int LM77_TEMP_FROM_REG(s16 reg)
{
- return ((int)reg / 8) * 500;
+ return (reg / 8) * 500;
}
/* sysfs stuff */
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index b176bf0..a2f6bb6 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -303,10 +303,6 @@
static int w83792d_attach_adapter(struct i2c_adapter *adapter);
static int w83792d_detect(struct i2c_adapter *adapter, int address, int kind);
static int w83792d_detach_client(struct i2c_client *client);
-
-static int w83792d_read_value(struct i2c_client *client, u8 register);
-static int w83792d_write_value(struct i2c_client *client, u8 register,
- u8 value);
static struct w83792d_data *w83792d_update_device(struct device *dev);
#ifdef DEBUG
@@ -329,6 +325,20 @@
return ((data->in[nr] << 2) | ((data->low_bits >> (2 * nr)) & 0x03));
}
+/* The SMBus locks itself. The Winbond W83792D chip has a bank register,
+ but the driver only accesses registers in bank 0, so we don't have
+ to switch banks and lock access between switches. */
+static inline int w83792d_read_value(struct i2c_client *client, u8 reg)
+{
+ return i2c_smbus_read_byte_data(client, reg);
+}
+
+static inline int
+w83792d_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
/* following are the sysfs callback functions */
static ssize_t show_in(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -1386,19 +1396,6 @@
return 0;
}
-/* The SMBus locks itself. The Winbond W83792D chip has a bank register,
- but the driver only accesses registers in bank 0, so we don't have
- to switch banks and lock access between switches. */
-static int w83792d_read_value(struct i2c_client *client, u8 reg)
-{
- return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int w83792d_write_value(struct i2c_client *client, u8 reg, u8 value)
-{
- return i2c_smbus_write_byte_data(client, reg, value);
-}
-
static void
w83792d_init_client(struct i2c_client *client)
{
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
index 938848a..3df3f09 100644
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ b/drivers/i2c/algos/i2c-algo-sibyte.c
@@ -202,7 +202,7 @@
#ifdef MODULE
MODULE_AUTHOR("Kip Walker, Broadcom Corp.");
MODULE_DESCRIPTION("SiByte I2C-Bus algorithm");
-MODULE_PARM(bit_scan, "i");
+module_param(bit_scan, int, 0);
MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 08d5b8f..ff92735 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -124,6 +124,7 @@
ICH6
ICH7
ESB2
+ ICH8
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 1c752dd..8e0f315 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -32,6 +32,7 @@
ICH6 266A
ICH7 27DA
ESB2 269B
+ ICH8 283E
This driver supports several versions of Intel's I/O Controller Hubs (ICH).
For SMBus support, they are similar to the PIIX4 and are part
of Intel's '810' and other chipsets.
@@ -527,6 +528,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
{ 0, }
};
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index 3e5eba9..c63025a 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -121,14 +121,11 @@
static int __init i2c_parport_init(void)
{
- int type_count;
-
- type_count = sizeof(adapter_parm)/sizeof(struct adapter_parm);
- if (type < 0 || type >= type_count) {
+ if (type < 0 || type >= ARRAY_SIZE(adapter_parm)) {
printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type);
type = 0;
}
-
+
if (base == 0) {
printk(KERN_INFO "i2c-parport: using default base 0x%x\n", DEFAULT_BASE);
base = DEFAULT_BASE;
@@ -152,7 +149,7 @@
release_region(base, 3);
return -ENODEV;
}
-
+
return 0;
}
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 2854d85..7e2e8cd 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -241,14 +241,11 @@
static int __init i2c_parport_init(void)
{
- int type_count;
-
- type_count = sizeof(adapter_parm)/sizeof(struct adapter_parm);
- if (type < 0 || type >= type_count) {
+ if (type < 0 || type >= ARRAY_SIZE(adapter_parm)) {
printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type);
type = 0;
}
-
+
return parport_register_driver(&i2c_parport_driver);
}
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 86e2234..7579f4b2 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -861,7 +861,7 @@
decode_ISR(isr);
}
- if (i2c->irqlogidx < sizeof(i2c->isrlog)/sizeof(u32))
+ if (i2c->irqlogidx < ARRAY_SIZE(i2c->isrlog))
i2c->isrlog[i2c->irqlogidx++] = isr;
show_state(i2c);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 0ce58b5..1a2c9ab 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -946,6 +946,20 @@
}
}
+s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command,
+ u8 length, u8 *values)
+{
+ union i2c_smbus_data data;
+
+ if (length > I2C_SMBUS_BLOCK_MAX)
+ length = I2C_SMBUS_BLOCK_MAX;
+ data.block[0] = length;
+ memcpy(data.block + 1, values, length);
+ return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_I2C_BLOCK_DATA, &data);
+}
+
/* Simulate a SMBus command using the i2c protocol
No checking of parameters is done! */
static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
@@ -1150,6 +1164,7 @@
EXPORT_SYMBOL(i2c_smbus_write_word_data);
EXPORT_SYMBOL(i2c_smbus_write_block_data);
EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
+EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus main module");
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 1c81174..d633081 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -52,9 +52,9 @@
if IDE
-config IDE_MAX_HWIFS
+config IDE_MAX_HWIFS
int "Max IDE interfaces"
- depends on ALPHA || SUPERH
+ depends on ALPHA || SUPERH || IA64
default 4
help
This is the maximum number of IDE hardware interfaces that will
@@ -162,8 +162,8 @@
tristate "PCMCIA IDE support"
depends on PCMCIA
help
- Support for outboard IDE disks, tape drives, and CD-ROM drives
- connected through a PCMCIA card.
+ Support for Compact Flash cards, outboard IDE disks, tape drives,
+ and CD-ROM drives connected through a PCMCIA card.
config BLK_DEV_IDECD
tristate "Include IDE/ATAPI CDROM support"
@@ -267,7 +267,7 @@
help
This is a direct raw access to the media. It is a complex but
elegant solution to test and validate the domain of the hardware and
- perform below the driver data recover if needed. This is the most
+ perform below the driver data recovery if needed. This is the most
basic form of media-forensics.
If you are unsure, say N here.
@@ -525,7 +525,7 @@
tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"
depends on EXPERIMENTAL
help
- Include support for PIO tuning an virtual DMA on the Cyrix MediaGX
+ Include support for PIO tuning and virtual DMA on the Cyrix MediaGX
5510/5520 chipset. This will automatically be detected and
configured if found.
@@ -662,7 +662,7 @@
It was originally designed for the PDC20246/Ultra33, whose BIOS will
only setup UDMA on the first two PDC20246 cards. It has also been
- used succesfully on a PDC20265/Ultra100, allowing use of UDMA modes
+ used successfully on a PDC20265/Ultra100, allowing use of UDMA modes
when the PDC20265 BIOS has been disabled (for faster boot up).
Please read the comments at the top of
@@ -673,13 +673,6 @@
config BLK_DEV_PDC202XX_NEW
tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
-# FIXME - probably wants to be one for old and for new
-config PDC202XX_FORCE
- bool "Enable controller even if disabled by BIOS"
- depends on BLK_DEV_PDC202XX_NEW
- help
- Enable the PDC202xx controller even if it has been disabled in the BIOS setup.
-
config BLK_DEV_SVWKS
tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
help
@@ -722,7 +715,7 @@
config BLK_DEV_SLC90E66
tristate "SLC90E66 chipset support"
help
- This driver ensures (U)DMA support for Victroy66 SouthBridges for
+ This driver ensures (U)DMA support for Victory66 SouthBridges for
SMsC with Intel NorthBridges. This is an Ultra66 based chipset.
The nice thing about it is that you can mix Ultra/DMA/PIO devices
and it will handle timing cycles. Since this is an improved
@@ -1060,7 +1053,7 @@
in that mode with an 80c ribbon.
If you are experiencing compatibility or performance problems, you
- MAY try to answering Y here. However, it does not necessarily solve
+ MAY try to answer Y here. However, it does not necessarily solve
any of your problems, it could even cause more of them.
It is normally safe to answer Y; however, the default is N.
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index ca25f9e..09086b8 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -190,7 +190,8 @@
if (lba48) {
task_ioreg_t tasklets[10];
- pr_debug("%s: LBA=0x%012llx\n", drive->name, block);
+ pr_debug("%s: LBA=0x%012llx\n", drive->name,
+ (unsigned long long)block);
tasklets[0] = 0;
tasklets[1] = 0;
@@ -317,7 +318,8 @@
pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
- block, rq->nr_sectors, (unsigned long)rq->buffer);
+ (unsigned long long)block, rq->nr_sectors,
+ (unsigned long)rq->buffer);
if (hwif->rw_disk)
hwif->rw_disk(drive, rq);
@@ -776,7 +778,7 @@
ide_id_has_flush_cache_ext(id));
printk(KERN_INFO "%s: cache flushes %ssupported\n",
- drive->name, barrier ? "" : "not");
+ drive->name, barrier ? "" : "not ");
if (barrier) {
ordered = QUEUE_ORDERED_DRAIN_FLUSH;
@@ -889,11 +891,7 @@
if (drive->id_read == 0)
return;
- /*
- * CompactFlash cards and their brethern look just like hard drives
- * to us, but they are removable and don't have a doorlock mechanism.
- */
- if (drive->removable && !(drive->is_flash)) {
+ if (drive->removable) {
/*
* Removable disks (eg. SYQUEST); ignore 'WD' drives
*/
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 8d50df4..c01615d 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -55,8 +55,8 @@
#include <asm/io.h>
#include <asm/bitops.h>
-int __ide_end_request(ide_drive_t *drive, struct request *rq, int uptodate,
- int nr_sectors)
+static int __ide_end_request(ide_drive_t *drive, struct request *rq,
+ int uptodate, int nr_sectors)
{
int ret = 1;
@@ -91,7 +91,6 @@
return ret;
}
-EXPORT_SYMBOL(__ide_end_request);
/**
* ide_end_request - complete an IDE I/O
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index af7af95..b72dde7 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -1243,6 +1243,7 @@
*/
if (stat == 0xff)
return -ENODEV;
+ touch_softlockup_watchdog();
}
return -EBUSY;
}
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index e742554..427d1c2 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -125,45 +125,6 @@
}
/**
- * drive_is_flashcard - check for compact flash
- * @drive: drive to check
- *
- * CompactFlash cards and their brethern pretend to be removable
- * hard disks, except:
- * (1) they never have a slave unit, and
- * (2) they don't have doorlock mechanisms.
- * This test catches them, and is invoked elsewhere when setting
- * appropriate config bits.
- *
- * FIXME: This treatment is probably applicable for *all* PCMCIA (PC CARD)
- * devices, so in linux 2.3.x we should change this to just treat all
- * PCMCIA drives this way, and get rid of the model-name tests below
- * (too big of an interface change for 2.4.x).
- * At that time, we might also consider parameterizing the timeouts and
- * retries, since these are MUCH faster than mechanical drives. -M.Lord
- */
-
-static inline int drive_is_flashcard (ide_drive_t *drive)
-{
- struct hd_driveid *id = drive->id;
-
- if (drive->removable) {
- if (id->config == 0x848a) return 1; /* CompactFlash */
- if (!strncmp(id->model, "KODAK ATA_FLASH", 15) /* Kodak */
- || !strncmp(id->model, "Hitachi CV", 10) /* Hitachi */
- || !strncmp(id->model, "SunDisk SDCFB", 13) /* old SanDisk */
- || !strncmp(id->model, "SanDisk SDCFB", 13) /* SanDisk */
- || !strncmp(id->model, "HAGIWARA HPC", 12) /* Hagiwara */
- || !strncmp(id->model, "LEXAR ATA_FLASH", 15) /* Lexar */
- || !strncmp(id->model, "ATA_FLASH", 9)) /* Simple Tech */
- {
- return 1; /* yes, it is a flash memory card */
- }
- }
- return 0; /* no, it is not a flash memory card */
-}
-
-/**
* do_identify - identify a drive
* @drive: drive to identify
* @cmd: command used
@@ -278,13 +239,17 @@
/*
* Not an ATAPI device: looks like a "regular" hard disk
*/
- if (id->config & (1<<7))
+
+ /*
+ * 0x848a = CompactFlash device
+ * These are *not* removable in Linux definition of the term
+ */
+
+ if ((id->config != 0x848a) && (id->config & (1<<7)))
drive->removable = 1;
- if (drive_is_flashcard(drive))
- drive->is_flash = 1;
drive->media = ide_disk;
- printk("%s DISK drive\n", (drive->is_flash) ? "CFA" : "ATA" );
+ printk("%s DISK drive\n", (id->config == 0x848a) ? "CFA" : "ATA" );
QUIRK_LIST(drive);
return;
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index afeb02bb..b2cc437 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -242,7 +242,6 @@
drive->name[2] = 'a' + (index * MAX_DRIVES) + unit;
drive->max_failures = IDE_DEFAULT_MAX_FAILURES;
drive->using_dma = 0;
- drive->is_flash = 0;
drive->vdma = 0;
INIT_LIST_HEAD(&drive->list);
init_completion(&drive->gendev_rel_comp);
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index a21b1e1..c743e68 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -262,6 +262,21 @@
else
pci_set_drvdata(dev, (void *) aec6xxx_34_base);
+ /* These are necessary to get AEC6280 Macintosh cards to work */
+ if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
+ (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
+ u8 reg49h = 0, reg4ah = 0;
+ /* Clear reset and test bits. */
+ pci_read_config_byte(dev, 0x49, ®49h);
+ pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
+ /* Enable chip interrupt output. */
+ pci_read_config_byte(dev, 0x4a, ®4ah);
+ pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
+ /* Enable burst mode. */
+ pci_read_config_byte(dev, 0x4a, ®4ah);
+ pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
+ }
+
return dev->irq;
}
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 7b589d9..940bdd4 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1288,6 +1288,10 @@
goto init_hpt37X_done;
}
}
+ if (!pci_get_drvdata(dev)) {
+ printk("No Clock Stabilization!!!\n");
+ return;
+ }
pll_recal:
if (adjust & 1)
pll -= (adjust >> 1);
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 108fda8..38f41b3 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -733,7 +733,7 @@
pci_write_config_dword(dev,0x4C, 0x02040204);
pci_write_config_byte(dev, 0x42, 0x36);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
}
static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const char *name)
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index fe06ebb..acd6317 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -420,9 +420,6 @@
.init_hwif = init_hwif_pdc202new,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
},{ /* 3 */
.name = "PDC20271",
@@ -447,9 +444,6 @@
.init_hwif = init_hwif_pdc202new,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
},{ /* 6 */
.name = "PDC20277",
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index ad9d9581..6f8f864 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -786,9 +786,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 16,
},{ /* 1 */
@@ -799,9 +796,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
.flags = IDEPCI_FLAG_FORCE_PDC,
@@ -813,9 +807,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
},{ /* 3 */
@@ -826,9 +817,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
.flags = IDEPCI_FLAG_FORCE_PDC,
@@ -840,9 +828,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
}
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index b3e77df..e9b83e1 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -135,6 +135,7 @@
case PCI_DEVICE_ID_INTEL_ICH6_19:
case PCI_DEVICE_ID_INTEL_ICH7_21:
case PCI_DEVICE_ID_INTEL_ESB2_18:
+ case PCI_DEVICE_ID_INTEL_ICH8_6:
mode = 3;
break;
/* UDMA 66 capable */
@@ -449,6 +450,7 @@
case PCI_DEVICE_ID_INTEL_ICH6_19:
case PCI_DEVICE_ID_INTEL_ICH7_21:
case PCI_DEVICE_ID_INTEL_ESB2_18:
+ case PCI_DEVICE_ID_INTEL_ICH8_6:
{
unsigned int extra = 0;
pci_read_config_dword(dev, 0x54, &extra);
@@ -575,6 +577,7 @@
/* 21 */ DECLARE_PIIX_DEV("ICH7"),
/* 22 */ DECLARE_PIIX_DEV("ICH4"),
/* 23 */ DECLARE_PIIX_DEV("ESB2"),
+ /* 24 */ DECLARE_PIIX_DEV("ICH8M"),
};
/**
@@ -651,6 +654,7 @@
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 21},
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 22},
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 23},
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 24},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 4ee597d..2b286e8 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2003 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2003-2006 Silicon Graphics, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
@@ -510,7 +510,7 @@
drive->name);
goto use_pio_instead;
} else {
- u32 xcount, bcount =
+ u32 bcount =
0x10000 - (cur_addr & 0xffff);
if (bcount > cur_len)
@@ -525,8 +525,7 @@
*table = 0x0;
table++;
- xcount = bcount & 0xffff;
- *table = cpu_to_be32(xcount);
+ *table = cpu_to_be32(bcount);
table++;
cur_addr += bcount;
@@ -680,7 +679,7 @@
return -EIO;
/* Create /proc/ide entries */
- create_proc_ide_interfaces();
+ create_proc_ide_interfaces();
return 0;
}
diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c
index acda7d6..501cc05 100644
--- a/drivers/infiniband/core/sa_query.c
+++ b/drivers/infiniband/core/sa_query.c
@@ -956,6 +956,8 @@
ib_unregister_event_handler(&sa_dev->event_handler);
+ flush_scheduled_work();
+
for (i = 0; i <= sa_dev->end_port - sa_dev->start_port; ++i) {
ib_unregister_mad_agent(sa_dev->port[i].agent);
kref_put(&sa_dev->port[i].sm_ah->ref, free_sm_ah);
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index e95c429..f6a0596 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -1319,15 +1319,6 @@
.release = ib_ucm_release_class_dev
};
-static ssize_t show_dev(struct class_device *class_dev, char *buf)
-{
- struct ib_ucm_device *dev;
-
- dev = container_of(class_dev, struct ib_ucm_device, class_dev);
- return print_dev_t(buf, dev->dev.dev);
-}
-static CLASS_DEVICE_ATTR(dev, S_IRUGO, show_dev, NULL);
-
static ssize_t show_ibdev(struct class_device *class_dev, char *buf)
{
struct ib_ucm_device *dev;
@@ -1364,15 +1355,13 @@
ucm_dev->class_dev.class = &ucm_class;
ucm_dev->class_dev.dev = device->dma_device;
+ ucm_dev->class_dev.devt = ucm_dev->dev.dev;
snprintf(ucm_dev->class_dev.class_id, BUS_ID_SIZE, "ucm%d",
ucm_dev->devnum);
if (class_device_register(&ucm_dev->class_dev))
goto err_cdev;
if (class_device_create_file(&ucm_dev->class_dev,
- &class_device_attr_dev))
- goto err_class;
- if (class_device_create_file(&ucm_dev->class_dev,
&class_device_attr_ibdev))
goto err_class;
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index 96ea79b..903f85a 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -902,6 +902,7 @@
unregister_filesystem(&uverbs_event_fs);
class_destroy(uverbs_class);
unregister_chrdev_region(IB_UVERBS_BASE_DEV, IB_UVERBS_MAX_DEVICES);
+ flush_scheduled_work();
idr_destroy(&ib_uverbs_pd_idr);
idr_destroy(&ib_uverbs_mr_idr);
idr_destroy(&ib_uverbs_mw_idr);
diff --git a/drivers/infiniband/hw/mthca/mthca_av.c b/drivers/infiniband/hw/mthca/mthca_av.c
index a14eed0..a19e0ed 100644
--- a/drivers/infiniband/hw/mthca/mthca_av.c
+++ b/drivers/infiniband/hw/mthca/mthca_av.c
@@ -184,7 +184,7 @@
ah->av->sl_tclass_flowlabel & cpu_to_be32(0xfffff);
ib_get_cached_gid(&dev->ib_dev,
be32_to_cpu(ah->av->port_pd) >> 24,
- ah->av->gid_index,
+ ah->av->gid_index % dev->limits.gid_table_len,
&header->grh.source_gid);
memcpy(header->grh.destination_gid.raw,
ah->av->dgid, 16);
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index be1791b..f9b9b93 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -199,8 +199,7 @@
{
int err = 0;
- if (down_interruptible(&dev->cmd.hcr_sem))
- return -EINTR;
+ mutex_lock(&dev->cmd.hcr_mutex);
if (event) {
unsigned long end = jiffies + GO_BIT_TIMEOUT;
@@ -238,7 +237,7 @@
op), dev->hcr + 6 * 4);
out:
- up(&dev->cmd.hcr_sem);
+ mutex_unlock(&dev->cmd.hcr_mutex);
return err;
}
@@ -255,8 +254,7 @@
int err = 0;
unsigned long end;
- if (down_interruptible(&dev->cmd.poll_sem))
- return -EINTR;
+ down(&dev->cmd.poll_sem);
err = mthca_cmd_post(dev, in_param,
out_param ? *out_param : 0,
@@ -333,8 +331,7 @@
int err = 0;
struct mthca_cmd_context *context;
- if (down_interruptible(&dev->cmd.event_sem))
- return -EINTR;
+ down(&dev->cmd.event_sem);
spin_lock(&dev->cmd.context_lock);
BUG_ON(dev->cmd.free_head < 0);
@@ -438,7 +435,7 @@
int mthca_cmd_init(struct mthca_dev *dev)
{
- sema_init(&dev->cmd.hcr_sem, 1);
+ mutex_init(&dev->cmd.hcr_mutex);
sema_init(&dev->cmd.poll_sem, 1);
dev->cmd.use_events = 0;
diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h
index a104ab0..2a165fd 100644
--- a/drivers/infiniband/hw/mthca/mthca_dev.h
+++ b/drivers/infiniband/hw/mthca/mthca_dev.h
@@ -44,6 +44,8 @@
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/timer.h>
+#include <linux/mutex.h>
+
#include <asm/semaphore.h>
#include "mthca_provider.h"
@@ -111,7 +113,7 @@
struct mthca_cmd {
struct pci_pool *pool;
int use_events;
- struct semaphore hcr_sem;
+ struct mutex hcr_mutex;
struct semaphore poll_sem;
struct semaphore event_sem;
int max_cmds;
@@ -256,7 +258,7 @@
};
struct mthca_mcg_table {
- struct semaphore sem;
+ struct mutex mutex;
struct mthca_alloc alloc;
struct mthca_icm_table *table;
};
@@ -301,7 +303,7 @@
u64 ddr_end;
MTHCA_DECLARE_DOORBELL_LOCK(doorbell_lock)
- struct semaphore cap_mask_mutex;
+ struct mutex cap_mask_mutex;
void __iomem *hcr;
void __iomem *kar;
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 8b00d9a..9c849d2 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -155,6 +155,13 @@
return -ENODEV;
}
+ if (dev_lim->uar_size > pci_resource_len(mdev->pdev, 2)) {
+ mthca_err(mdev, "HCA reported UAR size of 0x%x bigger than "
+ "PCI resource 2 size of 0x%lx, aborting.\n",
+ dev_lim->uar_size, pci_resource_len(mdev->pdev, 2));
+ return -ENODEV;
+ }
+
mdev->limits.num_ports = dev_lim->num_ports;
mdev->limits.vl_cap = dev_lim->max_vl;
mdev->limits.mtu_cap = dev_lim->max_mtu;
@@ -976,8 +983,7 @@
err = -ENODEV;
goto err_disable_pdev;
}
- if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM) ||
- pci_resource_len(pdev, 2) != 1 << 23) {
+ if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
dev_err(&pdev->dev, "Missing UAR, aborting.\n");
err = -ENODEV;
goto err_disable_pdev;
diff --git a/drivers/infiniband/hw/mthca/mthca_mcg.c b/drivers/infiniband/hw/mthca/mthca_mcg.c
index 77bc6c7..321f11e 100644
--- a/drivers/infiniband/hw/mthca/mthca_mcg.c
+++ b/drivers/infiniband/hw/mthca/mthca_mcg.c
@@ -154,10 +154,7 @@
return PTR_ERR(mailbox);
mgm = mailbox->buf;
- if (down_interruptible(&dev->mcg_table.sem)) {
- err = -EINTR;
- goto err_sem;
- }
+ mutex_lock(&dev->mcg_table.mutex);
err = find_mgm(dev, gid->raw, mailbox, &hash, &prev, &index);
if (err)
@@ -241,8 +238,8 @@
BUG_ON(index < dev->limits.num_mgms);
mthca_free(&dev->mcg_table.alloc, index);
}
- up(&dev->mcg_table.sem);
- err_sem:
+ mutex_unlock(&dev->mcg_table.mutex);
+
mthca_free_mailbox(dev, mailbox);
return err;
}
@@ -263,10 +260,7 @@
return PTR_ERR(mailbox);
mgm = mailbox->buf;
- if (down_interruptible(&dev->mcg_table.sem)) {
- err = -EINTR;
- goto err_sem;
- }
+ mutex_lock(&dev->mcg_table.mutex);
err = find_mgm(dev, gid->raw, mailbox, &hash, &prev, &index);
if (err)
@@ -371,8 +365,8 @@
}
out:
- up(&dev->mcg_table.sem);
- err_sem:
+ mutex_unlock(&dev->mcg_table.mutex);
+
mthca_free_mailbox(dev, mailbox);
return err;
}
@@ -389,7 +383,7 @@
if (err)
return err;
- init_MUTEX(&dev->mcg_table.sem);
+ mutex_init(&dev->mcg_table.mutex);
return 0;
}
diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c
index 9fb985a..d709cb1 100644
--- a/drivers/infiniband/hw/mthca/mthca_memfree.c
+++ b/drivers/infiniband/hw/mthca/mthca_memfree.c
@@ -50,7 +50,7 @@
};
struct mthca_user_db_table {
- struct semaphore mutex;
+ struct mutex mutex;
struct {
u64 uvirt;
struct scatterlist mem;
@@ -158,7 +158,7 @@
int ret = 0;
u8 status;
- down(&table->mutex);
+ mutex_lock(&table->mutex);
if (table->icm[i]) {
++table->icm[i]->refcount;
@@ -184,7 +184,7 @@
++table->icm[i]->refcount;
out:
- up(&table->mutex);
+ mutex_unlock(&table->mutex);
return ret;
}
@@ -198,7 +198,7 @@
i = (obj & (table->num_obj - 1)) * table->obj_size / MTHCA_TABLE_CHUNK_SIZE;
- down(&table->mutex);
+ mutex_lock(&table->mutex);
if (--table->icm[i]->refcount == 0) {
mthca_UNMAP_ICM(dev, table->virt + i * MTHCA_TABLE_CHUNK_SIZE,
@@ -207,7 +207,7 @@
table->icm[i] = NULL;
}
- up(&table->mutex);
+ mutex_unlock(&table->mutex);
}
void *mthca_table_find(struct mthca_icm_table *table, int obj)
@@ -220,7 +220,7 @@
if (!table->lowmem)
return NULL;
- down(&table->mutex);
+ mutex_lock(&table->mutex);
idx = (obj & (table->num_obj - 1)) * table->obj_size;
icm = table->icm[idx / MTHCA_TABLE_CHUNK_SIZE];
@@ -240,7 +240,7 @@
}
out:
- up(&table->mutex);
+ mutex_unlock(&table->mutex);
return page ? lowmem_page_address(page) + offset : NULL;
}
@@ -301,7 +301,7 @@
table->num_obj = nobj;
table->obj_size = obj_size;
table->lowmem = use_lowmem;
- init_MUTEX(&table->mutex);
+ mutex_init(&table->mutex);
for (i = 0; i < num_icm; ++i)
table->icm[i] = NULL;
@@ -380,7 +380,7 @@
if (index < 0 || index > dev->uar_table.uarc_size / 8)
return -EINVAL;
- down(&db_tab->mutex);
+ mutex_lock(&db_tab->mutex);
i = index / MTHCA_DB_REC_PER_PAGE;
@@ -424,7 +424,7 @@
db_tab->page[i].refcount = 1;
out:
- up(&db_tab->mutex);
+ mutex_unlock(&db_tab->mutex);
return ret;
}
@@ -439,11 +439,11 @@
* pages until we clean up the whole db table.
*/
- down(&db_tab->mutex);
+ mutex_lock(&db_tab->mutex);
--db_tab->page[index / MTHCA_DB_REC_PER_PAGE].refcount;
- up(&db_tab->mutex);
+ mutex_unlock(&db_tab->mutex);
}
struct mthca_user_db_table *mthca_init_user_db_tab(struct mthca_dev *dev)
@@ -460,7 +460,7 @@
if (!db_tab)
return ERR_PTR(-ENOMEM);
- init_MUTEX(&db_tab->mutex);
+ mutex_init(&db_tab->mutex);
for (i = 0; i < npages; ++i) {
db_tab->page[i].refcount = 0;
db_tab->page[i].uvirt = 0;
@@ -499,7 +499,7 @@
int ret = 0;
u8 status;
- down(&dev->db_tab->mutex);
+ mutex_lock(&dev->db_tab->mutex);
switch (type) {
case MTHCA_DB_TYPE_CQ_ARM:
@@ -585,7 +585,7 @@
*db = (__be32 *) &page->db_rec[j];
out:
- up(&dev->db_tab->mutex);
+ mutex_unlock(&dev->db_tab->mutex);
return ret;
}
@@ -601,7 +601,7 @@
page = dev->db_tab->page + i;
- down(&dev->db_tab->mutex);
+ mutex_lock(&dev->db_tab->mutex);
page->db_rec[j] = 0;
if (i >= dev->db_tab->min_group2)
@@ -624,7 +624,7 @@
++dev->db_tab->min_group2;
}
- up(&dev->db_tab->mutex);
+ mutex_unlock(&dev->db_tab->mutex);
}
int mthca_init_db_tab(struct mthca_dev *dev)
@@ -638,7 +638,7 @@
if (!dev->db_tab)
return -ENOMEM;
- init_MUTEX(&dev->db_tab->mutex);
+ mutex_init(&dev->db_tab->mutex);
dev->db_tab->npages = dev->uar_table.uarc_size / 4096;
dev->db_tab->max_group1 = 0;
diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.h b/drivers/infiniband/hw/mthca/mthca_memfree.h
index 4fdca26..36f1141 100644
--- a/drivers/infiniband/hw/mthca/mthca_memfree.h
+++ b/drivers/infiniband/hw/mthca/mthca_memfree.h
@@ -39,8 +39,7 @@
#include <linux/list.h>
#include <linux/pci.h>
-
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#define MTHCA_ICM_CHUNK_LEN \
((256 - sizeof (struct list_head) - 2 * sizeof (int)) / \
@@ -64,7 +63,7 @@
int num_obj;
int obj_size;
int lowmem;
- struct semaphore mutex;
+ struct mutex mutex;
struct mthca_icm *icm[0];
};
@@ -147,7 +146,7 @@
int max_group1;
int min_group2;
struct mthca_db_page *page;
- struct semaphore mutex;
+ struct mutex mutex;
};
enum mthca_db_type {
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c
index 484a7e6..e88e39a 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.c
+++ b/drivers/infiniband/hw/mthca/mthca_provider.c
@@ -185,7 +185,7 @@
int err;
u8 status;
- if (down_interruptible(&to_mdev(ibdev)->cap_mask_mutex))
+ if (mutex_lock_interruptible(&to_mdev(ibdev)->cap_mask_mutex))
return -ERESTARTSYS;
err = mthca_query_port(ibdev, port, &attr);
@@ -207,7 +207,7 @@
}
out:
- up(&to_mdev(ibdev)->cap_mask_mutex);
+ mutex_unlock(&to_mdev(ibdev)->cap_mask_mutex);
return err;
}
@@ -1185,7 +1185,7 @@
dev->ib_dev.post_recv = mthca_tavor_post_receive;
}
- init_MUTEX(&dev->cap_mask_mutex);
+ mutex_init(&dev->cap_mask_mutex);
ret = ib_register_device(&dev->ib_dev);
if (ret)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index fd3f5c8..c3b5f79 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -505,7 +505,7 @@
list_add_tail(&neigh->list, &path->neigh_list);
- if (path->pathrec.dlid) {
+ if (path->ah) {
kref_get(&path->ah->ref);
neigh->ah = path->ah;
@@ -591,7 +591,7 @@
return;
}
- if (path->pathrec.dlid) {
+ if (path->ah) {
ipoib_dbg(priv, "Send unicast ARP to %04x\n",
be16_to_cpu(path->pathrec.dlid));
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 98039da..ccaa0c3 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -97,6 +97,7 @@
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ipoib_neigh *neigh, *tmp;
unsigned long flags;
+ int tx_dropped = 0;
ipoib_dbg_mcast(netdev_priv(dev),
"deleting multicast group " IPOIB_GID_FMT "\n",
@@ -123,8 +124,14 @@
if (mcast->ah)
ipoib_put_ah(mcast->ah);
- while (!skb_queue_empty(&mcast->pkt_queue))
+ while (!skb_queue_empty(&mcast->pkt_queue)) {
+ ++tx_dropped;
dev_kfree_skb_any(skb_dequeue(&mcast->pkt_queue));
+ }
+
+ spin_lock_irqsave(&priv->tx_lock, flags);
+ priv->stats.tx_dropped += tx_dropped;
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
kfree(mcast);
}
@@ -276,8 +283,10 @@
}
/* actually send any queued packets */
+ spin_lock_irq(&priv->tx_lock);
while (!skb_queue_empty(&mcast->pkt_queue)) {
struct sk_buff *skb = skb_dequeue(&mcast->pkt_queue);
+ spin_unlock_irq(&priv->tx_lock);
skb->dev = dev;
@@ -288,7 +297,9 @@
if (dev_queue_xmit(skb))
ipoib_warn(priv, "dev_queue_xmit failed to requeue packet\n");
+ spin_lock_irq(&priv->tx_lock);
}
+ spin_unlock_irq(&priv->tx_lock);
return 0;
}
@@ -300,6 +311,7 @@
{
struct ipoib_mcast *mcast = mcast_ptr;
struct net_device *dev = mcast->dev;
+ struct ipoib_dev_priv *priv = netdev_priv(dev);
if (!status)
ipoib_mcast_join_finish(mcast, mcmember);
@@ -310,8 +322,12 @@
IPOIB_GID_ARG(mcast->mcmember.mgid), status);
/* Flush out any queued packets */
- while (!skb_queue_empty(&mcast->pkt_queue))
+ spin_lock_irq(&priv->tx_lock);
+ while (!skb_queue_empty(&mcast->pkt_queue)) {
+ ++priv->stats.tx_dropped;
dev_kfree_skb_any(skb_dequeue(&mcast->pkt_queue));
+ }
+ spin_unlock_irq(&priv->tx_lock);
/* Clear the busy flag so we try again */
clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
@@ -687,6 +703,7 @@
if (!mcast) {
ipoib_warn(priv, "unable to allocate memory for "
"multicast structure\n");
+ ++priv->stats.tx_dropped;
dev_kfree_skb_any(skb);
goto out;
}
@@ -700,8 +717,10 @@
if (!mcast->ah) {
if (skb_queue_len(&mcast->pkt_queue) < IPOIB_MAX_MCAST_QUEUE)
skb_queue_tail(&mcast->pkt_queue, skb);
- else
+ else {
+ ++priv->stats.tx_dropped;
dev_kfree_skb_any(skb);
+ }
if (mcast->query)
ipoib_dbg_mcast(priv, "no address vector, "
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 31207e66..2d2d4ac 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -357,9 +357,9 @@
target->state = SRP_TARGET_REMOVED;
spin_unlock_irq(target->scsi_host->host_lock);
- down(&target->srp_host->target_mutex);
+ mutex_lock(&target->srp_host->target_mutex);
list_del(&target->list);
- up(&target->srp_host->target_mutex);
+ mutex_unlock(&target->srp_host->target_mutex);
scsi_remove_host(target->scsi_host);
ib_destroy_cm_id(target->cm_id);
@@ -1254,9 +1254,9 @@
if (scsi_add_host(target->scsi_host, host->dev->dma_device))
return -ENODEV;
- down(&host->target_mutex);
+ mutex_lock(&host->target_mutex);
list_add_tail(&target->list, &host->target_list);
- up(&host->target_mutex);
+ mutex_unlock(&host->target_mutex);
target->state = SRP_TARGET_LIVE;
@@ -1525,7 +1525,7 @@
return NULL;
INIT_LIST_HEAD(&host->target_list);
- init_MUTEX(&host->target_mutex);
+ mutex_init(&host->target_mutex);
init_completion(&host->released);
host->dev = device;
host->port = port;
@@ -1626,7 +1626,7 @@
* Mark all target ports as removed, so we stop queueing
* commands and don't try to reconnect.
*/
- down(&host->target_mutex);
+ mutex_lock(&host->target_mutex);
list_for_each_entry_safe(target, tmp_target,
&host->target_list, list) {
spin_lock_irqsave(target->scsi_host->host_lock, flags);
@@ -1634,7 +1634,7 @@
target->state = SRP_TARGET_REMOVED;
spin_unlock_irqrestore(target->scsi_host->host_lock, flags);
}
- up(&host->target_mutex);
+ mutex_unlock(&host->target_mutex);
/*
* Wait for any reconnection tasks that may have
diff --git a/drivers/infiniband/ulp/srp/ib_srp.h b/drivers/infiniband/ulp/srp/ib_srp.h
index b564f18..4e7727d 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.h
+++ b/drivers/infiniband/ulp/srp/ib_srp.h
@@ -37,8 +37,7 @@
#include <linux/types.h>
#include <linux/list.h>
-
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
@@ -85,7 +84,7 @@
struct ib_mr *mr;
struct class_device class_dev;
struct list_head target_list;
- struct semaphore target_mutex;
+ struct mutex target_mutex;
struct completion released;
struct list_head list;
};
diff --git a/drivers/input/joystick/a3d.c b/drivers/input/joystick/a3d.c
index 4571ea3..4612d13 100644
--- a/drivers/input/joystick/a3d.c
+++ b/drivers/input/joystick/a3d.c
@@ -57,7 +57,7 @@
struct a3d {
struct gameport *gameport;
struct gameport *adc;
- struct input_dev dev;
+ struct input_dev *dev;
int axes[4];
int buttons;
int mode;
@@ -115,7 +115,7 @@
static void a3d_read(struct a3d *a3d, unsigned char *data)
{
- struct input_dev *dev = &a3d->dev;
+ struct input_dev *dev = a3d->dev;
switch (a3d->mode) {
@@ -265,14 +265,20 @@
static int a3d_connect(struct gameport *gameport, struct gameport_driver *drv)
{
struct a3d *a3d;
+ struct input_dev *input_dev;
struct gameport *adc;
unsigned char data[A3D_MAX_LENGTH];
int i;
int err;
- if (!(a3d = kzalloc(sizeof(struct a3d), GFP_KERNEL)))
- return -ENOMEM;
+ a3d = kzalloc(sizeof(struct a3d), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!a3d || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
+ a3d->dev = input_dev;
a3d->gameport = gameport;
gameport_set_drvdata(gameport, a3d);
@@ -302,42 +308,48 @@
sprintf(a3d->phys, "%s/input0", gameport->phys);
+ input_dev->name = a3d_names[a3d->mode];
+ input_dev->phys = a3d->phys;
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_MADCATZ;
+ input_dev->id.product = a3d->mode;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &gameport->dev;
+ input_dev->private = a3d;
+ input_dev->open = a3d_open;
+ input_dev->close = a3d_close;
+
if (a3d->mode == A3D_MODE_PXL) {
int axes[] = { ABS_X, ABS_Y, ABS_THROTTLE, ABS_RUDDER };
a3d->length = 33;
- init_input_dev(&a3d->dev);
-
- a3d->dev.evbit[0] |= BIT(EV_ABS) | BIT(EV_KEY) | BIT(EV_REL);
- a3d->dev.relbit[0] |= BIT(REL_X) | BIT(REL_Y);
- a3d->dev.absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_THROTTLE) | BIT(ABS_RUDDER)
- | BIT(ABS_HAT0X) | BIT(ABS_HAT0Y) | BIT(ABS_HAT1X) | BIT(ABS_HAT1Y);
-
- a3d->dev.keybit[LONG(BTN_MOUSE)] |= BIT(BTN_RIGHT) | BIT(BTN_LEFT) | BIT(BTN_MIDDLE)
- | BIT(BTN_SIDE) | BIT(BTN_EXTRA);
-
- a3d->dev.keybit[LONG(BTN_JOYSTICK)] |= BIT(BTN_TRIGGER) | BIT(BTN_THUMB) | BIT(BTN_TOP) | BIT(BTN_PINKIE);
+ input_dev->evbit[0] |= BIT(EV_ABS) | BIT(EV_KEY) | BIT(EV_REL);
+ input_dev->relbit[0] |= BIT(REL_X) | BIT(REL_Y);
+ input_dev->absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_THROTTLE) | BIT(ABS_RUDDER)
+ | BIT(ABS_HAT0X) | BIT(ABS_HAT0Y) | BIT(ABS_HAT1X) | BIT(ABS_HAT1Y);
+ input_dev->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_RIGHT) | BIT(BTN_LEFT) | BIT(BTN_MIDDLE)
+ | BIT(BTN_SIDE) | BIT(BTN_EXTRA);
+ input_dev->keybit[LONG(BTN_JOYSTICK)] |= BIT(BTN_TRIGGER) | BIT(BTN_THUMB) | BIT(BTN_TOP)
+ | BIT(BTN_PINKIE);
a3d_read(a3d, data);
for (i = 0; i < 4; i++) {
if (i < 2)
- input_set_abs_params(&a3d->dev, axes[i], 48, a3d->dev.abs[axes[i]] * 2 - 48, 0, 8);
+ input_set_abs_params(input_dev, axes[i], 48, input_dev->abs[axes[i]] * 2 - 48, 0, 8);
else
- input_set_abs_params(&a3d->dev, axes[i], 2, 253, 0, 0);
- input_set_abs_params(&a3d->dev, ABS_HAT0X + i, -1, 1, 0, 0);
+ input_set_abs_params(input_dev, axes[i], 2, 253, 0, 0);
+ input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0);
}
} else {
a3d->length = 29;
- init_input_dev(&a3d->dev);
-
- a3d->dev.evbit[0] |= BIT(EV_KEY) | BIT(EV_REL);
- a3d->dev.relbit[0] |= BIT(REL_X) | BIT(REL_Y);
- a3d->dev.keybit[LONG(BTN_MOUSE)] |= BIT(BTN_RIGHT) | BIT(BTN_LEFT) | BIT(BTN_MIDDLE);
+ input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_REL);
+ input_dev->relbit[0] |= BIT(REL_X) | BIT(REL_Y);
+ input_dev->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_RIGHT) | BIT(BTN_LEFT) | BIT(BTN_MIDDLE);
a3d_read(a3d, data);
@@ -358,24 +370,17 @@
}
}
- a3d->dev.private = a3d;
- a3d->dev.open = a3d_open;
- a3d->dev.close = a3d_close;
-
- a3d->dev.name = a3d_names[a3d->mode];
- a3d->dev.phys = a3d->phys;
- a3d->dev.id.bustype = BUS_GAMEPORT;
- a3d->dev.id.vendor = GAMEPORT_ID_VENDOR_MADCATZ;
- a3d->dev.id.product = a3d->mode;
- a3d->dev.id.version = 0x0100;
-
- input_register_device(&a3d->dev);
- printk(KERN_INFO "input: %s on %s\n", a3d_names[a3d->mode], a3d->phys);
+ err = input_register_device(a3d->dev);
+ if (err)
+ goto fail3;
return 0;
-fail2: gameport_close(gameport);
-fail1: gameport_set_drvdata(gameport, NULL);
+ fail3: if (a3d->adc)
+ gameport_unregister_port(a3d->adc);
+ fail2: gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
+ input_free_device(input_dev);
kfree(a3d);
return err;
}
@@ -384,11 +389,9 @@
{
struct a3d *a3d = gameport_get_drvdata(gameport);
- input_unregister_device(&a3d->dev);
- if (a3d->adc) {
+ input_unregister_device(a3d->dev);
+ if (a3d->adc)
gameport_unregister_port(a3d->adc);
- a3d->adc = NULL;
- }
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(a3d);
@@ -397,6 +400,7 @@
static struct gameport_driver a3d_drv = {
.driver = {
.name = "adc",
+ .owner = THIS_MODULE,
},
.description = DRIVER_DESC,
.connect = a3d_connect,
diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c
index 499344c..dcffc34 100644
--- a/drivers/input/joystick/db9.c
+++ b/drivers/input/joystick/db9.c
@@ -275,68 +275,70 @@
/*
* db9_saturn_report() analyzes packet and reports.
*/
-static int db9_saturn_report(unsigned char id, unsigned char data[60], struct input_dev *dev, int n, int max_pads)
+static int db9_saturn_report(unsigned char id, unsigned char data[60], struct input_dev *devs[], int n, int max_pads)
{
+ struct input_dev *dev;
int tmp, i, j;
tmp = (id == 0x41) ? 60 : 10;
- for (j = 0; (j < tmp) && (n < max_pads); j += 10, n++) {
+ for (j = 0; j < tmp && n < max_pads; j += 10, n++) {
+ dev = devs[n];
switch (data[j]) {
case 0x16: /* multi controller (analog 4 axis) */
- input_report_abs(dev + n, db9_abs[5], data[j + 6]);
+ input_report_abs(dev, db9_abs[5], data[j + 6]);
case 0x15: /* mission stick (analog 3 axis) */
- input_report_abs(dev + n, db9_abs[3], data[j + 4]);
- input_report_abs(dev + n, db9_abs[4], data[j + 5]);
+ input_report_abs(dev, db9_abs[3], data[j + 4]);
+ input_report_abs(dev, db9_abs[4], data[j + 5]);
case 0x13: /* racing controller (analog 1 axis) */
- input_report_abs(dev + n, db9_abs[2], data[j + 3]);
+ input_report_abs(dev, db9_abs[2], data[j + 3]);
case 0x34: /* saturn keyboard (udlr ZXC ASD QE Esc) */
case 0x02: /* digital pad (digital 2 axis + buttons) */
- input_report_abs(dev + n, db9_abs[0], !(data[j + 1] & 128) - !(data[j + 1] & 64));
- input_report_abs(dev + n, db9_abs[1], !(data[j + 1] & 32) - !(data[j + 1] & 16));
+ input_report_abs(dev, db9_abs[0], !(data[j + 1] & 128) - !(data[j + 1] & 64));
+ input_report_abs(dev, db9_abs[1], !(data[j + 1] & 32) - !(data[j + 1] & 16));
for (i = 0; i < 9; i++)
- input_report_key(dev + n, db9_cd32_btn[i], ~data[j + db9_saturn_byte[i]] & db9_saturn_mask[i]);
+ input_report_key(dev, db9_cd32_btn[i], ~data[j + db9_saturn_byte[i]] & db9_saturn_mask[i]);
break;
case 0x19: /* mission stick x2 (analog 6 axis + buttons) */
- input_report_abs(dev + n, db9_abs[0], !(data[j + 1] & 128) - !(data[j + 1] & 64));
- input_report_abs(dev + n, db9_abs[1], !(data[j + 1] & 32) - !(data[j + 1] & 16));
+ input_report_abs(dev, db9_abs[0], !(data[j + 1] & 128) - !(data[j + 1] & 64));
+ input_report_abs(dev, db9_abs[1], !(data[j + 1] & 32) - !(data[j + 1] & 16));
for (i = 0; i < 9; i++)
- input_report_key(dev + n, db9_cd32_btn[i], ~data[j + db9_saturn_byte[i]] & db9_saturn_mask[i]);
- input_report_abs(dev + n, db9_abs[2], data[j + 3]);
- input_report_abs(dev + n, db9_abs[3], data[j + 4]);
- input_report_abs(dev + n, db9_abs[4], data[j + 5]);
+ input_report_key(dev, db9_cd32_btn[i], ~data[j + db9_saturn_byte[i]] & db9_saturn_mask[i]);
+ input_report_abs(dev, db9_abs[2], data[j + 3]);
+ input_report_abs(dev, db9_abs[3], data[j + 4]);
+ input_report_abs(dev, db9_abs[4], data[j + 5]);
/*
- input_report_abs(dev + n, db9_abs[8], (data[j + 6] & 128 ? 0 : 1) - (data[j + 6] & 64 ? 0 : 1));
- input_report_abs(dev + n, db9_abs[9], (data[j + 6] & 32 ? 0 : 1) - (data[j + 6] & 16 ? 0 : 1));
+ input_report_abs(dev, db9_abs[8], (data[j + 6] & 128 ? 0 : 1) - (data[j + 6] & 64 ? 0 : 1));
+ input_report_abs(dev, db9_abs[9], (data[j + 6] & 32 ? 0 : 1) - (data[j + 6] & 16 ? 0 : 1));
*/
- input_report_abs(dev + n, db9_abs[6], data[j + 7]);
- input_report_abs(dev + n, db9_abs[7], data[j + 8]);
- input_report_abs(dev + n, db9_abs[5], data[j + 9]);
+ input_report_abs(dev, db9_abs[6], data[j + 7]);
+ input_report_abs(dev, db9_abs[7], data[j + 8]);
+ input_report_abs(dev, db9_abs[5], data[j + 9]);
break;
case 0xd3: /* sankyo ff (analog 1 axis + stop btn) */
- input_report_key(dev + n, BTN_A, data[j + 3] & 0x80);
- input_report_abs(dev + n, db9_abs[2], data[j + 3] & 0x7f);
+ input_report_key(dev, BTN_A, data[j + 3] & 0x80);
+ input_report_abs(dev, db9_abs[2], data[j + 3] & 0x7f);
break;
case 0xe3: /* shuttle mouse (analog 2 axis + buttons. signed value) */
- input_report_key(dev + n, BTN_START, data[j + 1] & 0x08);
- input_report_key(dev + n, BTN_A, data[j + 1] & 0x04);
- input_report_key(dev + n, BTN_C, data[j + 1] & 0x02);
- input_report_key(dev + n, BTN_B, data[j + 1] & 0x01);
- input_report_abs(dev + n, db9_abs[2], data[j + 2] ^ 0x80);
- input_report_abs(dev + n, db9_abs[3], (0xff-(data[j + 3] ^ 0x80))+1); /* */
+ input_report_key(dev, BTN_START, data[j + 1] & 0x08);
+ input_report_key(dev, BTN_A, data[j + 1] & 0x04);
+ input_report_key(dev, BTN_C, data[j + 1] & 0x02);
+ input_report_key(dev, BTN_B, data[j + 1] & 0x01);
+ input_report_abs(dev, db9_abs[2], data[j + 2] ^ 0x80);
+ input_report_abs(dev, db9_abs[3], (0xff-(data[j + 3] ^ 0x80))+1); /* */
break;
case 0xff:
default: /* no pad */
- input_report_abs(dev + n, db9_abs[0], 0);
- input_report_abs(dev + n, db9_abs[1], 0);
+ input_report_abs(dev, db9_abs[0], 0);
+ input_report_abs(dev, db9_abs[1], 0);
for (i = 0; i < 9; i++)
- input_report_key(dev + n, db9_cd32_btn[i], 0);
+ input_report_key(dev, db9_cd32_btn[i], 0);
break;
}
}
return n;
}
-static int db9_saturn(int mode, struct parport *port, struct input_dev *dev)
+static int db9_saturn(int mode, struct parport *port, struct input_dev *devs[])
{
unsigned char id, data[60];
int type, n, max_pads;
@@ -361,7 +363,7 @@
max_pads = min(db9_modes[mode].n_pads, DB9_MAX_DEVICES);
for (tmp = 0, i = 0; i < n; i++) {
id = db9_saturn_read_packet(port, data, type + i, 1);
- tmp = db9_saturn_report(id, data, dev, tmp, max_pads);
+ tmp = db9_saturn_report(id, data, devs, tmp, max_pads);
}
return 0;
}
@@ -489,7 +491,7 @@
case DB9_SATURN_DPP:
case DB9_SATURN_DPP_2:
- db9_saturn(db9->mode, port, dev);
+ db9_saturn(db9->mode, port, db9->dev);
break;
case DB9_CD32_PAD:
@@ -614,7 +616,7 @@
if (!input_dev) {
printk(KERN_ERR "db9.c: Not enough memory for input device\n");
err = -ENOMEM;
- goto err_free_devs;
+ goto err_unreg_devs;
}
sprintf(db9->phys[i], "%s/input%d", db9->pd->port->name, i);
@@ -640,13 +642,17 @@
input_set_abs_params(input_dev, db9_abs[j], 1, 255, 0, 0);
}
- input_register_device(input_dev);
+ err = input_register_device(input_dev);
+ if (err)
+ goto err_free_dev;
}
parport_put_port(pp);
return db9;
- err_free_devs:
+ err_free_dev:
+ input_free_device(db9->dev[i]);
+ err_unreg_devs:
while (--i >= 0)
input_unregister_device(db9->dev[i]);
kfree(db9);
@@ -658,7 +664,7 @@
return ERR_PTR(err);
}
-static void __exit db9_remove(struct db9 *db9)
+static void db9_remove(struct db9 *db9)
{
int i;
@@ -696,7 +702,8 @@
if (err) {
while (--i >= 0)
- db9_remove(db9_base[i]);
+ if (db9_base[i])
+ db9_remove(db9_base[i]);
return err;
}
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index 7df2d82..900587a 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -159,6 +159,48 @@
}
+static void gc_n64_process_packet(struct gc *gc)
+{
+ unsigned char data[GC_N64_LENGTH];
+ signed char axes[2];
+ struct input_dev *dev;
+ int i, j, s;
+
+ gc_n64_read_packet(gc, data);
+
+ for (i = 0; i < GC_MAX_DEVICES; i++) {
+
+ dev = gc->dev[i];
+ if (!dev)
+ continue;
+
+ s = gc_status_bit[i];
+
+ if (s & gc->pads[GC_N64] & ~(data[8] | data[9])) {
+
+ axes[0] = axes[1] = 0;
+
+ for (j = 0; j < 8; j++) {
+ if (data[23 - j] & s)
+ axes[0] |= 1 << j;
+ if (data[31 - j] & s)
+ axes[1] |= 1 << j;
+ }
+
+ input_report_abs(dev, ABS_X, axes[0]);
+ input_report_abs(dev, ABS_Y, -axes[1]);
+
+ input_report_abs(dev, ABS_HAT0X, !(s & data[6]) - !(s & data[7]));
+ input_report_abs(dev, ABS_HAT0Y, !(s & data[4]) - !(s & data[5]));
+
+ for (j = 0; j < 10; j++)
+ input_report_key(dev, gc_n64_btn[j], s & data[gc_n64_bytes[j]]);
+
+ input_sync(dev);
+ }
+ }
+}
+
/*
* NES/SNES support.
*/
@@ -198,6 +240,39 @@
}
}
+static void gc_nes_process_packet(struct gc *gc)
+{
+ unsigned char data[GC_SNES_LENGTH];
+ struct input_dev *dev;
+ int i, j, s;
+
+ gc_nes_read_packet(gc, gc->pads[GC_SNES] ? GC_SNES_LENGTH : GC_NES_LENGTH, data);
+
+ for (i = 0; i < GC_MAX_DEVICES; i++) {
+
+ dev = gc->dev[i];
+ if (!dev)
+ continue;
+
+ s = gc_status_bit[i];
+
+ if (s & (gc->pads[GC_NES] | gc->pads[GC_SNES])) {
+ input_report_abs(dev, ABS_X, !(s & data[6]) - !(s & data[7]));
+ input_report_abs(dev, ABS_Y, !(s & data[4]) - !(s & data[5]));
+ }
+
+ if (s & gc->pads[GC_NES])
+ for (j = 0; j < 4; j++)
+ input_report_key(dev, gc_snes_btn[j], s & data[gc_nes_bytes[j]]);
+
+ if (s & gc->pads[GC_SNES])
+ for (j = 0; j < 8; j++)
+ input_report_key(dev, gc_snes_btn[j], s & data[gc_snes_bytes[j]]);
+
+ input_sync(dev);
+ }
+}
+
/*
* Multisystem joystick support
*/
@@ -219,6 +294,35 @@
}
}
+static void gc_multi_process_packet(struct gc *gc)
+{
+ unsigned char data[GC_MULTI2_LENGTH];
+ struct input_dev *dev;
+ int i, s;
+
+ gc_multi_read_packet(gc, gc->pads[GC_MULTI2] ? GC_MULTI2_LENGTH : GC_MULTI_LENGTH, data);
+
+ for (i = 0; i < GC_MAX_DEVICES; i++) {
+
+ dev = gc->dev[i];
+ if (!dev)
+ continue;
+
+ s = gc_status_bit[i];
+
+ if (s & (gc->pads[GC_MULTI] | gc->pads[GC_MULTI2])) {
+ input_report_abs(dev, ABS_X, !(s & data[2]) - !(s & data[3]));
+ input_report_abs(dev, ABS_Y, !(s & data[0]) - !(s & data[1]));
+ input_report_key(dev, BTN_TRIGGER, s & data[4]);
+ }
+
+ if (s & gc->pads[GC_MULTI2])
+ input_report_key(dev, BTN_THUMB, s & data[5]);
+
+ input_sync(dev);
+ }
+}
+
/*
* PSX support
*
@@ -263,10 +367,11 @@
* the psx pad.
*/
-static void gc_psx_command(struct gc *gc, int b, unsigned char data[5])
+static void gc_psx_command(struct gc *gc, int b, unsigned char data[GC_MAX_DEVICES])
{
int i, j, cmd, read;
- for (i = 0; i < 5; i++)
+
+ for (i = 0; i < GC_MAX_DEVICES; i++)
data[i] = 0;
for (i = 0; i < GC_PSX_LENGTH; i++, b >>= 1) {
@@ -274,7 +379,7 @@
parport_write_data(gc->pd->port, cmd | GC_PSX_POWER);
udelay(gc_psx_delay);
read = parport_read_status(gc->pd->port) ^ 0x80;
- for (j = 0; j < 5; j++)
+ for (j = 0; j < GC_MAX_DEVICES; j++)
data[j] |= (read & gc_status_bit[j] & (gc->pads[GC_PSX] | gc->pads[GC_DDR])) ? (1 << i) : 0;
parport_write_data(gc->pd->port, cmd | GC_PSX_CLOCK | GC_PSX_POWER);
udelay(gc_psx_delay);
@@ -286,11 +391,12 @@
* device identifier code.
*/
-static void gc_psx_read_packet(struct gc *gc, unsigned char data[5][GC_PSX_BYTES], unsigned char id[5])
+static void gc_psx_read_packet(struct gc *gc, unsigned char data[GC_MAX_DEVICES][GC_PSX_BYTES],
+ unsigned char id[GC_MAX_DEVICES])
{
int i, j, max_len = 0;
unsigned long flags;
- unsigned char data2[5];
+ unsigned char data2[GC_MAX_DEVICES];
parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER); /* Select pad */
udelay(gc_psx_delay);
@@ -303,7 +409,7 @@
gc_psx_command(gc, 0x42, id); /* Get device ids */
gc_psx_command(gc, 0, data2); /* Dump status */
- for (i =0; i < 5; i++) /* Find the longest pad */
+ for (i =0; i < GC_MAX_DEVICES; i++) /* Find the longest pad */
if((gc_status_bit[i] & (gc->pads[GC_PSX] | gc->pads[GC_DDR]))
&& (GC_PSX_LEN(id[i]) > max_len)
&& (GC_PSX_LEN(id[i]) <= GC_PSX_BYTES))
@@ -311,7 +417,7 @@
for (i = 0; i < max_len; i++) { /* Read in all the data */
gc_psx_command(gc, 0, data2);
- for (j = 0; j < 5; j++)
+ for (j = 0; j < GC_MAX_DEVICES; j++)
data[j][i] = data2[j];
}
@@ -319,185 +425,124 @@
parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER);
- for(i = 0; i < 5; i++) /* Set id's to the real value */
+ for(i = 0; i < GC_MAX_DEVICES; i++) /* Set id's to the real value */
id[i] = GC_PSX_ID(id[i]);
}
-/*
- * gc_timer() reads and analyzes console pads data.
- */
+static void gc_psx_process_packet(struct gc *gc)
+{
+ unsigned char data[GC_MAX_DEVICES][GC_PSX_BYTES];
+ unsigned char id[GC_MAX_DEVICES];
+ struct input_dev *dev;
+ int i, j;
-#define GC_MAX_LENGTH GC_N64_LENGTH
+ gc_psx_read_packet(gc, data, id);
+
+ for (i = 0; i < GC_MAX_DEVICES; i++) {
+
+ dev = gc->dev[i];
+ if (!dev)
+ continue;
+
+ switch (id[i]) {
+
+ case GC_PSX_RUMBLE:
+
+ input_report_key(dev, BTN_THUMBL, ~data[i][0] & 0x04);
+ input_report_key(dev, BTN_THUMBR, ~data[i][0] & 0x02);
+
+ case GC_PSX_NEGCON:
+ case GC_PSX_ANALOG:
+
+ if (gc->pads[GC_DDR] & gc_status_bit[i]) {
+ for(j = 0; j < 4; j++)
+ input_report_key(dev, gc_psx_ddr_btn[j], ~data[i][0] & (0x10 << j));
+ } else {
+ for (j = 0; j < 4; j++)
+ input_report_abs(dev, gc_psx_abs[j + 2], data[i][j + 2]);
+
+ input_report_abs(dev, ABS_X, 128 + !(data[i][0] & 0x20) * 127 - !(data[i][0] & 0x80) * 128);
+ input_report_abs(dev, ABS_Y, 128 + !(data[i][0] & 0x40) * 127 - !(data[i][0] & 0x10) * 128);
+ }
+
+ for (j = 0; j < 8; j++)
+ input_report_key(dev, gc_psx_btn[j], ~data[i][1] & (1 << j));
+
+ input_report_key(dev, BTN_START, ~data[i][0] & 0x08);
+ input_report_key(dev, BTN_SELECT, ~data[i][0] & 0x01);
+
+ input_sync(dev);
+
+ break;
+
+ case GC_PSX_NORMAL:
+ if (gc->pads[GC_DDR] & gc_status_bit[i]) {
+ for(j = 0; j < 4; j++)
+ input_report_key(dev, gc_psx_ddr_btn[j], ~data[i][0] & (0x10 << j));
+ } else {
+ input_report_abs(dev, ABS_X, 128 + !(data[i][0] & 0x20) * 127 - !(data[i][0] & 0x80) * 128);
+ input_report_abs(dev, ABS_Y, 128 + !(data[i][0] & 0x40) * 127 - !(data[i][0] & 0x10) * 128);
+
+ /* for some reason if the extra axes are left unset they drift */
+ /* for (j = 0; j < 4; j++)
+ input_report_abs(dev, gc_psx_abs[j + 2], 128);
+ * This needs to be debugged properly,
+ * maybe fuzz processing needs to be done in input_sync()
+ * --vojtech
+ */
+ }
+
+ for (j = 0; j < 8; j++)
+ input_report_key(dev, gc_psx_btn[j], ~data[i][1] & (1 << j));
+
+ input_report_key(dev, BTN_START, ~data[i][0] & 0x08);
+ input_report_key(dev, BTN_SELECT, ~data[i][0] & 0x01);
+
+ input_sync(dev);
+
+ break;
+
+ case 0: /* not a pad, ignore */
+ break;
+ }
+ }
+}
+
+/*
+ * gc_timer() initiates reads of console pads data.
+ */
static void gc_timer(unsigned long private)
{
struct gc *gc = (void *) private;
- unsigned char data[GC_MAX_LENGTH];
- unsigned char data_psx[5][GC_PSX_BYTES];
- int i, j, s;
/*
* N64 pads - must be read first, any read confuses them for 200 us
*/
- if (gc->pads[GC_N64]) {
-
- gc_n64_read_packet(gc, data);
-
- for (i = 0; i < 5; i++) {
-
- s = gc_status_bit[i];
-
- if (s & gc->pads[GC_N64] & ~(data[8] | data[9])) {
-
- signed char axes[2];
- axes[0] = axes[1] = 0;
-
- for (j = 0; j < 8; j++) {
- if (data[23 - j] & s) axes[0] |= 1 << j;
- if (data[31 - j] & s) axes[1] |= 1 << j;
- }
-
- input_report_abs(gc->dev[i], ABS_X, axes[0]);
- input_report_abs(gc->dev[i], ABS_Y, -axes[1]);
-
- input_report_abs(gc->dev[i], ABS_HAT0X, !(s & data[6]) - !(s & data[7]));
- input_report_abs(gc->dev[i], ABS_HAT0Y, !(s & data[4]) - !(s & data[5]));
-
- for (j = 0; j < 10; j++)
- input_report_key(gc->dev[i], gc_n64_btn[j], s & data[gc_n64_bytes[j]]);
-
- input_sync(gc->dev[i]);
- }
- }
- }
+ if (gc->pads[GC_N64])
+ gc_n64_process_packet(gc);
/*
* NES and SNES pads
*/
- if (gc->pads[GC_NES] || gc->pads[GC_SNES]) {
-
- gc_nes_read_packet(gc, gc->pads[GC_SNES] ? GC_SNES_LENGTH : GC_NES_LENGTH, data);
-
- for (i = 0; i < 5; i++) {
-
- s = gc_status_bit[i];
-
- if (s & (gc->pads[GC_NES] | gc->pads[GC_SNES])) {
- input_report_abs(gc->dev[i], ABS_X, !(s & data[6]) - !(s & data[7]));
- input_report_abs(gc->dev[i], ABS_Y, !(s & data[4]) - !(s & data[5]));
- }
-
- if (s & gc->pads[GC_NES])
- for (j = 0; j < 4; j++)
- input_report_key(gc->dev[i], gc_snes_btn[j], s & data[gc_nes_bytes[j]]);
-
- if (s & gc->pads[GC_SNES])
- for (j = 0; j < 8; j++)
- input_report_key(gc->dev[i], gc_snes_btn[j], s & data[gc_snes_bytes[j]]);
-
- input_sync(gc->dev[i]);
- }
- }
+ if (gc->pads[GC_NES] || gc->pads[GC_SNES])
+ gc_nes_process_packet(gc);
/*
* Multi and Multi2 joysticks
*/
- if (gc->pads[GC_MULTI] || gc->pads[GC_MULTI2]) {
-
- gc_multi_read_packet(gc, gc->pads[GC_MULTI2] ? GC_MULTI2_LENGTH : GC_MULTI_LENGTH, data);
-
- for (i = 0; i < 5; i++) {
-
- s = gc_status_bit[i];
-
- if (s & (gc->pads[GC_MULTI] | gc->pads[GC_MULTI2])) {
- input_report_abs(gc->dev[i], ABS_X, !(s & data[2]) - !(s & data[3]));
- input_report_abs(gc->dev[i], ABS_Y, !(s & data[0]) - !(s & data[1]));
- input_report_key(gc->dev[i], BTN_TRIGGER, s & data[4]);
- }
-
- if (s & gc->pads[GC_MULTI2])
- input_report_key(gc->dev[i], BTN_THUMB, s & data[5]);
-
- input_sync(gc->dev[i]);
- }
- }
+ if (gc->pads[GC_MULTI] || gc->pads[GC_MULTI2])
+ gc_multi_process_packet(gc);
/*
* PSX controllers
*/
- if (gc->pads[GC_PSX] || gc->pads[GC_DDR]) {
-
- gc_psx_read_packet(gc, data_psx, data);
-
- for (i = 0; i < 5; i++) {
- switch (data[i]) {
-
- case GC_PSX_RUMBLE:
-
- input_report_key(gc->dev[i], BTN_THUMBL, ~data_psx[i][0] & 0x04);
- input_report_key(gc->dev[i], BTN_THUMBR, ~data_psx[i][0] & 0x02);
-
- case GC_PSX_NEGCON:
- case GC_PSX_ANALOG:
-
- if (gc->pads[GC_DDR] & gc_status_bit[i]) {
- for(j = 0; j < 4; j++)
- input_report_key(gc->dev[i], gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j));
- } else {
- for (j = 0; j < 4; j++)
- input_report_abs(gc->dev[i], gc_psx_abs[j+2], data_psx[i][j + 2]);
-
- input_report_abs(gc->dev[i], ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128);
- input_report_abs(gc->dev[i], ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128);
- }
-
- for (j = 0; j < 8; j++)
- input_report_key(gc->dev[i], gc_psx_btn[j], ~data_psx[i][1] & (1 << j));
-
- input_report_key(gc->dev[i], BTN_START, ~data_psx[i][0] & 0x08);
- input_report_key(gc->dev[i], BTN_SELECT, ~data_psx[i][0] & 0x01);
-
- input_sync(gc->dev[i]);
-
- break;
-
- case GC_PSX_NORMAL:
- if (gc->pads[GC_DDR] & gc_status_bit[i]) {
- for(j = 0; j < 4; j++)
- input_report_key(gc->dev[i], gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j));
- } else {
- input_report_abs(gc->dev[i], ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128);
- input_report_abs(gc->dev[i], ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128);
-
- /* for some reason if the extra axes are left unset they drift */
- /* for (j = 0; j < 4; j++)
- input_report_abs(gc->dev[i], gc_psx_abs[j+2], 128);
- * This needs to be debugged properly,
- * maybe fuzz processing needs to be done in input_sync()
- * --vojtech
- */
- }
-
- for (j = 0; j < 8; j++)
- input_report_key(gc->dev[i], gc_psx_btn[j], ~data_psx[i][1] & (1 << j));
-
- input_report_key(gc->dev[i], BTN_START, ~data_psx[i][0] & 0x08);
- input_report_key(gc->dev[i], BTN_SELECT, ~data_psx[i][0] & 0x01);
-
- input_sync(gc->dev[i]);
-
- break;
-
- case 0: /* not a pad, ignore */
- break;
- }
- }
- }
+ if (gc->pads[GC_PSX] || gc->pads[GC_DDR])
+ gc_psx_process_packet(gc);
mod_timer(&gc->timer, jiffies + GC_REFRESH_TIME);
}
@@ -654,16 +699,18 @@
gc->timer.data = (long) gc;
gc->timer.function = gc_timer;
- for (i = 0; i < n_pads; i++) {
+ for (i = 0; i < n_pads && i < GC_MAX_DEVICES; i++) {
if (!pads[i])
continue;
sprintf(gc->phys[i], "%s/input%d", gc->pd->port->name, i);
err = gc_setup_pad(gc, i, pads[i]);
if (err)
- goto err_free_devs;
+ goto err_unreg_devs;
- input_register_device(gc->dev[i]);
+ err = input_register_device(gc->dev[i]);
+ if (err)
+ goto err_free_dev;
}
if (!gc->pads[0]) {
@@ -675,9 +722,12 @@
parport_put_port(pp);
return gc;
- err_free_devs:
+ err_free_dev:
+ input_free_device(gc->dev[i]);
+ err_unreg_devs:
while (--i >= 0)
- input_unregister_device(gc->dev[i]);
+ if (gc->dev[i])
+ input_unregister_device(gc->dev[i]);
err_free_gc:
kfree(gc);
err_unreg_pardev:
@@ -688,7 +738,7 @@
return ERR_PTR(err);
}
-static void __exit gc_remove(struct gc *gc)
+static void gc_remove(struct gc *gc)
{
int i;
@@ -726,7 +776,8 @@
if (err) {
while (--i >= 0)
- gc_remove(gc_base[i]);
+ if (gc_base[i])
+ gc_remove(gc_base[i]);
return err;
}
diff --git a/drivers/input/joystick/grip.c b/drivers/input/joystick/grip.c
index a936e7a..20cb98a 100644
--- a/drivers/input/joystick/grip.c
+++ b/drivers/input/joystick/grip.c
@@ -192,6 +192,9 @@
for (i = 0; i < 2; i++) {
dev = grip->dev[i];
+ if (!dev)
+ continue;
+
grip->reads++;
switch (grip->mode[i]) {
@@ -381,12 +384,15 @@
if (t > 0)
set_bit(t, input_dev->keybit);
- input_register_device(grip->dev[i]);
+ err = input_register_device(grip->dev[i]);
+ if (err)
+ goto fail4;
}
return 0;
- fail3: for (i = 0; i < 2; i++)
+ fail4: input_free_device(grip->dev[i]);
+ fail3: while (--i >= 0)
if (grip->dev[i])
input_unregister_device(grip->dev[i]);
fail2: gameport_close(gameport);
@@ -411,6 +417,7 @@
static struct gameport_driver grip_drv = {
.driver = {
.name = "grip",
+ .owner = THIS_MODULE,
},
.description = DRIVER_DESC,
.connect = grip_connect,
diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c
index 64b9c31..b6bc049 100644
--- a/drivers/input/joystick/iforce/iforce-main.c
+++ b/drivers/input/joystick/iforce/iforce-main.c
@@ -345,7 +345,7 @@
int i;
input_dev = input_allocate_device();
- if (input_dev)
+ if (!input_dev)
return -ENOMEM;
init_waitqueue_head(&iforce->wait);
diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c
index 4a26292..76cb1f8 100644
--- a/drivers/input/joystick/iforce/iforce-packets.c
+++ b/drivers/input/joystick/iforce/iforce-packets.c
@@ -167,9 +167,9 @@
iforce->expect_packet = 0;
iforce->ecmd = cmd;
memcpy(iforce->edata, data, IFORCE_MAX_LENGTH);
- wake_up(&iforce->wait);
}
#endif
+ wake_up(&iforce->wait);
if (!iforce->type) {
being_used--;
@@ -264,7 +264,7 @@
wait_event_interruptible_timeout(iforce->wait,
iforce->ctrl->status != -EINPROGRESS, HZ);
- if (iforce->ctrl->status != -EINPROGRESS) {
+ if (iforce->ctrl->status) {
usb_unlink_urb(iforce->ctrl);
return -1;
}
diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c
index bc2fce6..fe79d15 100644
--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -95,7 +95,6 @@
goto exit;
}
- wake_up(&iforce->wait);
iforce_process_packet(iforce,
(iforce->data[0] << 8) | (urb->actual_length - 1), iforce->data + 1, regs);
diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c
index 78dd163..2b2ec10 100644
--- a/drivers/input/joystick/sidewinder.c
+++ b/drivers/input/joystick/sidewinder.c
@@ -736,7 +736,7 @@
sprintf(sw->name, "Microsoft SideWinder %s", sw_name[sw->type]);
sprintf(sw->phys[i], "%s/input%d", gameport->phys, i);
- input_dev = input_allocate_device();
+ sw->dev[i] = input_dev = input_allocate_device();
if (!input_dev) {
err = -ENOMEM;
goto fail3;
@@ -771,12 +771,15 @@
dbg("%s%s [%d-bit id %d data %d]\n", sw->name, comment, m, l, k);
- input_register_device(sw->dev[i]);
+ err = input_register_device(sw->dev[i]);
+ if (err)
+ goto fail4;
}
return 0;
- fail3: while (--i >= 0)
+ fail4: input_free_device(sw->dev[i]);
+ fail3: while (--i >= 0)
input_unregister_device(sw->dev[i]);
fail2: gameport_close(gameport);
fail1: gameport_set_drvdata(gameport, NULL);
@@ -801,6 +804,7 @@
static struct gameport_driver sw_drv = {
.driver = {
.name = "sidewinder",
+ .owner = THIS_MODULE,
},
.description = DRIVER_DESC,
.connect = sw_connect,
diff --git a/drivers/input/joystick/tmdc.c b/drivers/input/joystick/tmdc.c
index 60e2aac..bb23ed2 100644
--- a/drivers/input/joystick/tmdc.c
+++ b/drivers/input/joystick/tmdc.c
@@ -284,13 +284,13 @@
struct tmdc_port *port;
struct input_dev *input_dev;
int i, j, b = 0;
+ int err;
tmdc->port[idx] = port = kzalloc(sizeof (struct tmdc_port), GFP_KERNEL);
input_dev = input_allocate_device();
if (!port || !input_dev) {
- kfree(port);
- input_free_device(input_dev);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto fail;
}
port->mode = data[TMDC_BYTE_ID];
@@ -347,9 +347,15 @@
b += port->btnc[i];
}
- input_register_device(port->dev);
+ err = input_register_device(port->dev);
+ if (err)
+ goto fail;
return 0;
+
+ fail: input_free_device(input_dev);
+ kfree(port);
+ return err;
}
/*
@@ -424,6 +430,7 @@
static struct gameport_driver tmdc_drv = {
.driver = {
.name = "tmdc",
+ .owner = THIS_MODULE,
},
.description = DRIVER_DESC,
.connect = tmdc_connect,
diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c
index 7e97649..b154938 100644
--- a/drivers/input/joystick/turbografx.c
+++ b/drivers/input/joystick/turbografx.c
@@ -204,14 +204,14 @@
if (n_buttons[i] > 6) {
printk(KERN_ERR "turbografx.c: Invalid number of buttons %d\n", n_buttons[i]);
err = -EINVAL;
- goto err_free_devs;
+ goto err_unreg_devs;
}
tgfx->dev[i] = input_dev = input_allocate_device();
if (!input_dev) {
printk(KERN_ERR "turbografx.c: Not enough memory for input device\n");
err = -ENOMEM;
- goto err_free_devs;
+ goto err_unreg_devs;
}
tgfx->sticks |= (1 << i);
@@ -238,7 +238,9 @@
for (j = 0; j < n_buttons[i]; j++)
set_bit(tgfx_buttons[j], input_dev->keybit);
- input_register_device(tgfx->dev[i]);
+ err = input_register_device(tgfx->dev[i]);
+ if (err)
+ goto err_free_dev;
}
if (!tgfx->sticks) {
@@ -249,9 +251,12 @@
return tgfx;
- err_free_devs:
+ err_free_dev:
+ input_free_device(tgfx->dev[i]);
+ err_unreg_devs:
while (--i >= 0)
- input_unregister_device(tgfx->dev[i]);
+ if (tgfx->dev[i])
+ input_unregister_device(tgfx->dev[i]);
err_free_tgfx:
kfree(tgfx);
err_unreg_pardev:
@@ -262,7 +267,7 @@
return ERR_PTR(err);
}
-static void __exit tgfx_remove(struct tgfx *tgfx)
+static void tgfx_remove(struct tgfx *tgfx)
{
int i;
@@ -300,7 +305,8 @@
if (err) {
while (--i >= 0)
- tgfx_remove(tgfx_base[i]);
+ if (tgfx_base[i])
+ tgfx_remove(tgfx_base[i]);
return err;
}
diff --git a/drivers/input/joystick/twidjoy.c b/drivers/input/joystick/twidjoy.c
index cd3a1e7..7f8b009 100644
--- a/drivers/input/joystick/twidjoy.c
+++ b/drivers/input/joystick/twidjoy.c
@@ -265,13 +265,13 @@
* The functions for inserting/removing us as a module.
*/
-int __init twidjoy_init(void)
+static int __init twidjoy_init(void)
{
serio_register_driver(&twidjoy_drv);
return 0;
}
-void __exit twidjoy_exit(void)
+static void __exit twidjoy_exit(void)
{
serio_unregister_driver(&twidjoy_drv);
}
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index e08dbe0..4bad588 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -50,6 +50,18 @@
To compile this driver as a module, choose M here: the module will
be called wistron_btns.
+config INPUT_IXP4XX_BEEPER
+ tristate "IXP4XX Beeper support"
+ depends on ARCH_IXP4XX
+ help
+ If you say yes here, you can connect a beeper to the
+ ixp4xx gpio pins. This is used by the LinkSys NSLU2.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ixp4xx-beeper.
+
config INPUT_UINPUT
tristate "User level driver support"
help
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index ce44cce..184c412 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -11,3 +11,4 @@
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
+obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
new file mode 100644
index 0000000..d448bb5
--- /dev/null
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -0,0 +1,183 @@
+/*
+ * Generic IXP4xx beeper driver
+ *
+ * Copyright (C) 2005 Tower Technologies
+ *
+ * based on nslu2-io.c
+ * Copyright (C) 2004 Karen Spearel
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("ixp4xx beeper driver");
+MODULE_LICENSE("GPL");
+
+static DEFINE_SPINLOCK(beep_lock);
+
+static void ixp4xx_spkr_control(unsigned int pin, unsigned int count)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&beep_lock, flags);
+
+ if (count) {
+ gpio_line_config(pin, IXP4XX_GPIO_OUT);
+ gpio_line_set(pin, IXP4XX_GPIO_LOW);
+
+ *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
+ } else {
+ gpio_line_config(pin, IXP4XX_GPIO_IN);
+ gpio_line_set(pin, IXP4XX_GPIO_HIGH);
+
+ *IXP4XX_OSRT2 = 0;
+ }
+
+ spin_unlock_irqrestore(&beep_lock, flags);
+}
+
+static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
+{
+ unsigned int pin = (unsigned int) dev->private;
+ unsigned int count = 0;
+
+ if (type != EV_SND)
+ return -1;
+
+ switch (code) {
+ case SND_BELL:
+ if (value)
+ value = 1000;
+ case SND_TONE:
+ break;
+ default:
+ return -1;
+ }
+
+ if (value > 20 && value < 32767)
+#ifndef FREQ
+ count = (ixp4xx_get_board_tick_rate() / (value * 4)) - 1;
+#else
+ count = (FREQ / (value * 4)) - 1;
+#endif
+
+ ixp4xx_spkr_control(pin, count);
+
+ return 0;
+}
+
+static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ /* clear interrupt */
+ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
+
+ /* flip the beeper output */
+ *IXP4XX_GPIO_GPOUTR ^= (1 << (unsigned int) dev_id);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit ixp4xx_spkr_probe(struct platform_device *dev)
+{
+ struct input_dev *input_dev;
+ int err;
+
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ input_dev->private = (void *) dev->id;
+ input_dev->name = "ixp4xx beeper",
+ input_dev->phys = "ixp4xx/gpio";
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0x001f;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &dev->dev;
+
+ input_dev->evbit[0] = BIT(EV_SND);
+ input_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
+ input_dev->event = ixp4xx_spkr_event;
+
+ err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt,
+ SA_INTERRUPT | SA_TIMER, "ixp4xx-beeper", (void *) dev->id);
+ if (err)
+ goto err_free_device;
+
+ err = input_register_device(input_dev);
+ if (err)
+ goto err_free_irq;
+
+ platform_set_drvdata(dev, input_dev);
+
+ return 0;
+
+ err_free_irq:
+ free_irq(IRQ_IXP4XX_TIMER2, dev);
+ err_free_device:
+ input_free_device(input_dev);
+
+ return err;
+}
+
+static int __devexit ixp4xx_spkr_remove(struct platform_device *dev)
+{
+ struct input_dev *input_dev = platform_get_drvdata(dev);
+ unsigned int pin = (unsigned int) input_dev->private;
+
+ input_unregister_device(input_dev);
+ platform_set_drvdata(dev, NULL);
+
+ /* turn the speaker off */
+ disable_irq(IRQ_IXP4XX_TIMER2);
+ ixp4xx_spkr_control(pin, 0);
+
+ free_irq(IRQ_IXP4XX_TIMER2, dev);
+
+ return 0;
+}
+
+static void ixp4xx_spkr_shutdown(struct platform_device *dev)
+{
+ struct input_dev *input_dev = platform_get_drvdata(dev);
+ unsigned int pin = (unsigned int) input_dev->private;
+
+ /* turn off the speaker */
+ disable_irq(IRQ_IXP4XX_TIMER2);
+ ixp4xx_spkr_control(pin, 0);
+}
+
+static struct platform_driver ixp4xx_spkr_platform_driver = {
+ .driver = {
+ .name = "ixp4xx-beeper",
+ .owner = THIS_MODULE,
+ },
+ .probe = ixp4xx_spkr_probe,
+ .remove = __devexit_p(ixp4xx_spkr_remove),
+ .shutdown = ixp4xx_spkr_shutdown,
+};
+
+static int __init ixp4xx_spkr_init(void)
+{
+ return platform_driver_register(&ixp4xx_spkr_platform_driver);
+}
+
+static void __exit ixp4xx_spkr_exit(void)
+{
+ platform_driver_unregister(&ixp4xx_spkr_platform_driver);
+}
+
+module_init(ixp4xx_spkr_init);
+module_exit(ixp4xx_spkr_exit);
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 7665fd9..19b1b01 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -403,6 +403,7 @@
set_bit(REL_WHEEL, psmouse->dev->relbit);
psmouse->vendor = "Genius";
+ psmouse->name = "Mouse";
psmouse->pktsize = 4;
}
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 81fd7a9..9abed18 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -356,7 +356,7 @@
kfree(mousedev);
}
-static int mixdev_release(void)
+static void mixdev_release(void)
{
struct input_handle *handle;
@@ -370,8 +370,6 @@
mousedev_free(mousedev);
}
}
-
- return 0;
}
static int mousedev_release(struct inode * inode, struct file * file)
@@ -384,9 +382,8 @@
if (!--list->mousedev->open) {
if (list->mousedev->minor == MOUSEDEV_MIX)
- return mixdev_release();
-
- if (!mousedev_mix.open) {
+ mixdev_release();
+ else if (!mousedev_mix.open) {
if (list->mousedev->exist)
input_close_device(&list->mousedev->handle);
else
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index dd8c6a9..b45a45c 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -29,9 +29,6 @@
#ifdef CONFIG_ARCH_OMAP
#include <asm/arch/gpio.h>
#endif
-
-#else
-#define set_irq_type(irq,type) do{}while(0)
#endif
@@ -509,14 +506,14 @@
ts->msg.complete = ads7846_rx;
ts->msg.context = ts;
- if (request_irq(spi->irq, ads7846_irq, SA_SAMPLE_RANDOM,
- spi->dev.bus_id, ts)) {
+ if (request_irq(spi->irq, ads7846_irq,
+ SA_SAMPLE_RANDOM | SA_TRIGGER_FALLING,
+ spi->dev.bus_id, ts)) {
dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
input_unregister_device(&ts->input);
kfree(ts);
return -EBUSY;
}
- set_irq_type(spi->irq, IRQT_FALLING);
dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq);
diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c
index 4844d25..3226830 100644
--- a/drivers/input/touchscreen/mk712.c
+++ b/drivers/input/touchscreen/mk712.c
@@ -154,7 +154,7 @@
spin_unlock_irqrestore(&mk712_lock, flags);
}
-int __init mk712_init(void)
+static int __init mk712_init(void)
{
int err;
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 0ef5601..6dfc941 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -351,7 +351,7 @@
config HISAX_AMD7930
bool "Am7930 (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SPARC
+ depends on EXPERIMENTAL && SPARC && BROKEN
help
This enables HiSax support for the AMD7930 chips on some SPARCs.
This code is not finished yet.
diff --git a/drivers/isdn/hisax/hisax.h b/drivers/isdn/hisax/hisax.h
index 1b85ce16..11fe537 100644
--- a/drivers/isdn/hisax/hisax.h
+++ b/drivers/isdn/hisax/hisax.h
@@ -216,7 +216,7 @@
#define GROUP_TEI 127
#define TEI_SAPI 63
#define CTRL_SAPI 0
-#define PACKET_NOACK 250
+#define PACKET_NOACK 7
/* Layer2 Flags */
diff --git a/drivers/isdn/sc/ioctl.c b/drivers/isdn/sc/ioctl.c
index 3314a5a..94c9afb 100644
--- a/drivers/isdn/sc/ioctl.c
+++ b/drivers/isdn/sc/ioctl.c
@@ -71,14 +71,14 @@
/*
* Get the SRec from user space
*/
- if (copy_from_user(srec, data->dataptr, sizeof(srec))) {
+ if (copy_from_user(srec, data->dataptr, SCIOC_SRECSIZE)) {
kfree(rcvmsg);
kfree(srec);
return -EFAULT;
}
status = send_and_receive(card, CMPID, cmReqType2, cmReqClass0, cmReqLoadProc,
- 0, sizeof(srec), srec, rcvmsg, SAR_TIMEOUT);
+ 0, SCIOC_SRECSIZE, srec, rcvmsg, SAR_TIMEOUT);
kfree(rcvmsg);
kfree(srec);
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 7d4a0ac..12ad462 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -187,6 +187,14 @@
This driver provides thermal control for the PowerMac9,1
which is the recent (SMU based) single CPU desktop G5
+config WINDFARM_PM112
+ tristate "Support for thermal management on PowerMac11,2"
+ depends on WINDFARM && I2C && PMAC_SMU
+ select I2C_POWERMAC
+ help
+ This driver provides thermal control for the PowerMac11,2
+ which are the recent dual and quad G5 machines using the
+ 970MP dual-core processor.
config ANSLCD
tristate "Support for ANS LCD display"
diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
index f4657aa..6081acd 100644
--- a/drivers/macintosh/Makefile
+++ b/drivers/macintosh/Makefile
@@ -35,3 +35,8 @@
windfarm_smu_sensors.o \
windfarm_lm75_sensor.o windfarm_pid.o \
windfarm_cpufreq_clamp.o windfarm_pm91.o
+obj-$(CONFIG_WINDFARM_PM112) += windfarm_pm112.o windfarm_smu_sat.o \
+ windfarm_smu_controls.o \
+ windfarm_smu_sensors.o \
+ windfarm_max6690_sensor.o \
+ windfarm_lm75_sensor.o windfarm_pid.o
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index ed6d317..69596f6 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -140,10 +140,9 @@
{
struct macio_dev * macio_dev;
struct of_device * of;
- char *scratch, *compat;
+ char *scratch, *compat, *compat2;
int i = 0;
- int length = 0;
- int cplen, seen = 0;
+ int length, cplen, cplen2, seen = 0;
if (!dev)
return -ENODEV;
@@ -153,23 +152,22 @@
return -ENODEV;
of = &macio_dev->ofdev;
- scratch = buffer;
/* stuff we want to pass to /sbin/hotplug */
- envp[i++] = scratch;
- length += scnprintf (scratch, buffer_size - length, "OF_NAME=%s",
- of->node->name);
- if ((buffer_size - length <= 0) || (i >= num_envp))
- return -ENOMEM;
+ envp[i++] = scratch = buffer;
+ length = scnprintf (scratch, buffer_size, "OF_NAME=%s", of->node->name);
++length;
+ buffer_size -= length;
+ if ((buffer_size <= 0) || (i >= num_envp))
+ return -ENOMEM;
scratch += length;
envp[i++] = scratch;
- length += scnprintf (scratch, buffer_size - length, "OF_TYPE=%s",
- of->node->type);
- if ((buffer_size - length <= 0) || (i >= num_envp))
- return -ENOMEM;
+ length = scnprintf (scratch, buffer_size, "OF_TYPE=%s", of->node->type);
++length;
+ buffer_size -= length;
+ if ((buffer_size <= 0) || (i >= num_envp))
+ return -ENOMEM;
scratch += length;
/* Since the compatible field can contain pretty much anything
@@ -177,29 +175,55 @@
* up using a number of environment variables instead. */
compat = (char *) get_property(of->node, "compatible", &cplen);
+ compat2 = compat;
+ cplen2= cplen;
while (compat && cplen > 0) {
- int l;
envp[i++] = scratch;
- length += scnprintf (scratch, buffer_size - length,
+ length = scnprintf (scratch, buffer_size,
"OF_COMPATIBLE_%d=%s", seen, compat);
- if ((buffer_size - length <= 0) || (i >= num_envp))
+ ++length;
+ buffer_size -= length;
+ if ((buffer_size <= 0) || (i >= num_envp))
return -ENOMEM;
- length++;
scratch += length;
- l = strlen (compat) + 1;
- compat += l;
- cplen -= l;
+ length = strlen (compat) + 1;
+ compat += length;
+ cplen -= length;
seen++;
}
envp[i++] = scratch;
- length += scnprintf (scratch, buffer_size - length,
- "OF_COMPATIBLE_N=%d", seen);
- if ((buffer_size - length <= 0) || (i >= num_envp))
- return -ENOMEM;
+ length = scnprintf (scratch, buffer_size, "OF_COMPATIBLE_N=%d", seen);
++length;
+ buffer_size -= length;
+ if ((buffer_size <= 0) || (i >= num_envp))
+ return -ENOMEM;
scratch += length;
+ envp[i++] = scratch;
+ length = scnprintf (scratch, buffer_size, "MODALIAS=of:N%sT%s",
+ of->node->name, of->node->type);
+ /* overwrite '\0' */
+ buffer_size -= length;
+ if ((buffer_size <= 0) || (i >= num_envp))
+ return -ENOMEM;
+ scratch += length;
+
+ if (!compat2) {
+ compat2 = "";
+ cplen2 = 1;
+ }
+ while (cplen2 > 0) {
+ length = snprintf (scratch, buffer_size, "C%s", compat2);
+ buffer_size -= length;
+ if (buffer_size <= 0)
+ return -ENOMEM;
+ scratch += length;
+ length = strlen (compat2) + 1;
+ compat2 += length;
+ cplen2 -= length;
+ }
+
envp[i] = NULL;
return 0;
diff --git a/drivers/macintosh/windfarm.h b/drivers/macintosh/windfarm.h
index 3f0cb03..7a2482c 100644
--- a/drivers/macintosh/windfarm.h
+++ b/drivers/macintosh/windfarm.h
@@ -14,6 +14,7 @@
#include <linux/list.h>
#include <linux/module.h>
#include <linux/notifier.h>
+#include <linux/device.h>
/* Display a 16.16 fixed point value */
#define FIX32TOPRINT(f) ((f) >> 16),((((f) & 0xffff) * 1000) >> 16)
@@ -39,6 +40,7 @@
char *name;
int type;
struct kref ref;
+ struct device_attribute attr;
};
#define WF_CONTROL_TYPE_GENERIC 0
@@ -87,6 +89,7 @@
struct wf_sensor_ops *ops;
char *name;
struct kref ref;
+ struct device_attribute attr;
};
/* Same lifetime rules as controls */
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index 6c2a471..bb8d5ef 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -33,6 +33,7 @@
#include <linux/reboot.h>
#include <linux/device.h>
#include <linux/platform_device.h>
+#include <linux/mutex.h>
#include "windfarm.h"
@@ -48,13 +49,17 @@
static LIST_HEAD(wf_controls);
static LIST_HEAD(wf_sensors);
-static DECLARE_MUTEX(wf_lock);
+static DEFINE_MUTEX(wf_lock);
static struct notifier_block *wf_client_list;
static int wf_client_count;
static unsigned int wf_overtemp;
static unsigned int wf_overtemp_counter;
struct task_struct *wf_thread;
+static struct platform_device wf_platform_device = {
+ .name = "windfarm",
+};
+
/*
* Utilities & tick thread
*/
@@ -156,26 +161,67 @@
kfree(ct);
}
+static ssize_t wf_show_control(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wf_control *ctrl = container_of(attr, struct wf_control, attr);
+ s32 val = 0;
+ int err;
+
+ err = ctrl->ops->get_value(ctrl, &val);
+ if (err < 0)
+ return err;
+ return sprintf(buf, "%d\n", val);
+}
+
+/* This is really only for debugging... */
+static ssize_t wf_store_control(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct wf_control *ctrl = container_of(attr, struct wf_control, attr);
+ int val;
+ int err;
+ char *endp;
+
+ val = simple_strtoul(buf, &endp, 0);
+ while (endp < buf + count && (*endp == ' ' || *endp == '\n'))
+ ++endp;
+ if (endp - buf < count)
+ return -EINVAL;
+ err = ctrl->ops->set_value(ctrl, val);
+ if (err < 0)
+ return err;
+ return count;
+}
+
int wf_register_control(struct wf_control *new_ct)
{
struct wf_control *ct;
- down(&wf_lock);
+ mutex_lock(&wf_lock);
list_for_each_entry(ct, &wf_controls, link) {
if (!strcmp(ct->name, new_ct->name)) {
printk(KERN_WARNING "windfarm: trying to register"
" duplicate control %s\n", ct->name);
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
return -EEXIST;
}
}
kref_init(&new_ct->ref);
list_add(&new_ct->link, &wf_controls);
+ new_ct->attr.attr.name = new_ct->name;
+ new_ct->attr.attr.owner = THIS_MODULE;
+ new_ct->attr.attr.mode = 0644;
+ new_ct->attr.show = wf_show_control;
+ new_ct->attr.store = wf_store_control;
+ device_create_file(&wf_platform_device.dev, &new_ct->attr);
+
DBG("wf: Registered control %s\n", new_ct->name);
wf_notify(WF_EVENT_NEW_CONTROL, new_ct);
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
return 0;
}
@@ -183,9 +229,9 @@
void wf_unregister_control(struct wf_control *ct)
{
- down(&wf_lock);
+ mutex_lock(&wf_lock);
list_del(&ct->link);
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
DBG("wf: Unregistered control %s\n", ct->name);
@@ -197,16 +243,16 @@
{
struct wf_control *ct;
- down(&wf_lock);
+ mutex_lock(&wf_lock);
list_for_each_entry(ct, &wf_controls, link) {
if (!strcmp(ct->name, name)) {
if (wf_get_control(ct))
ct = NULL;
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
return ct;
}
}
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
return NULL;
}
EXPORT_SYMBOL_GPL(wf_find_control);
@@ -246,26 +292,46 @@
kfree(sr);
}
+static ssize_t wf_show_sensor(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wf_sensor *sens = container_of(attr, struct wf_sensor, attr);
+ s32 val = 0;
+ int err;
+
+ err = sens->ops->get_value(sens, &val);
+ if (err < 0)
+ return err;
+ return sprintf(buf, "%d.%03d\n", FIX32TOPRINT(val));
+}
+
int wf_register_sensor(struct wf_sensor *new_sr)
{
struct wf_sensor *sr;
- down(&wf_lock);
+ mutex_lock(&wf_lock);
list_for_each_entry(sr, &wf_sensors, link) {
if (!strcmp(sr->name, new_sr->name)) {
printk(KERN_WARNING "windfarm: trying to register"
" duplicate sensor %s\n", sr->name);
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
return -EEXIST;
}
}
kref_init(&new_sr->ref);
list_add(&new_sr->link, &wf_sensors);
+ new_sr->attr.attr.name = new_sr->name;
+ new_sr->attr.attr.owner = THIS_MODULE;
+ new_sr->attr.attr.mode = 0444;
+ new_sr->attr.show = wf_show_sensor;
+ new_sr->attr.store = NULL;
+ device_create_file(&wf_platform_device.dev, &new_sr->attr);
+
DBG("wf: Registered sensor %s\n", new_sr->name);
wf_notify(WF_EVENT_NEW_SENSOR, new_sr);
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
return 0;
}
@@ -273,9 +339,9 @@
void wf_unregister_sensor(struct wf_sensor *sr)
{
- down(&wf_lock);
+ mutex_lock(&wf_lock);
list_del(&sr->link);
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
DBG("wf: Unregistered sensor %s\n", sr->name);
@@ -287,16 +353,16 @@
{
struct wf_sensor *sr;
- down(&wf_lock);
+ mutex_lock(&wf_lock);
list_for_each_entry(sr, &wf_sensors, link) {
if (!strcmp(sr->name, name)) {
if (wf_get_sensor(sr))
sr = NULL;
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
return sr;
}
}
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
return NULL;
}
EXPORT_SYMBOL_GPL(wf_find_sensor);
@@ -329,7 +395,7 @@
struct wf_control *ct;
struct wf_sensor *sr;
- down(&wf_lock);
+ mutex_lock(&wf_lock);
rc = notifier_chain_register(&wf_client_list, nb);
if (rc != 0)
goto bail;
@@ -341,19 +407,19 @@
if (wf_client_count == 1)
wf_start_thread();
bail:
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
return rc;
}
EXPORT_SYMBOL_GPL(wf_register_client);
int wf_unregister_client(struct notifier_block *nb)
{
- down(&wf_lock);
+ mutex_lock(&wf_lock);
notifier_chain_unregister(&wf_client_list, nb);
wf_client_count++;
if (wf_client_count == 0)
wf_stop_thread();
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
return 0;
}
@@ -361,23 +427,23 @@
void wf_set_overtemp(void)
{
- down(&wf_lock);
+ mutex_lock(&wf_lock);
wf_overtemp++;
if (wf_overtemp == 1) {
printk(KERN_WARNING "windfarm: Overtemp condition detected !\n");
wf_overtemp_counter = 0;
wf_notify(WF_EVENT_OVERTEMP, NULL);
}
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
}
EXPORT_SYMBOL_GPL(wf_set_overtemp);
void wf_clear_overtemp(void)
{
- down(&wf_lock);
+ mutex_lock(&wf_lock);
WARN_ON(wf_overtemp == 0);
if (wf_overtemp == 0) {
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
return;
}
wf_overtemp--;
@@ -385,7 +451,7 @@
printk(KERN_WARNING "windfarm: Overtemp condition cleared !\n");
wf_notify(WF_EVENT_NORMALTEMP, NULL);
}
- up(&wf_lock);
+ mutex_unlock(&wf_lock);
}
EXPORT_SYMBOL_GPL(wf_clear_overtemp);
@@ -395,10 +461,6 @@
}
EXPORT_SYMBOL_GPL(wf_is_overtemp);
-static struct platform_device wf_platform_device = {
- .name = "windfarm",
-};
-
static int __init windfarm_core_init(void)
{
DBG("wf: core loaded\n");
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
new file mode 100644
index 0000000..5b9ad6ca
--- /dev/null
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -0,0 +1,169 @@
+/*
+ * Windfarm PowerMac thermal control. MAX6690 sensor.
+ *
+ * Copyright (C) 2005 Paul Mackerras, IBM Corp. <paulus@samba.org>
+ *
+ * Use and redistribute under the terms of the GNU GPL v2.
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-dev.h>
+#include <asm/prom.h>
+#include <asm/pmac_low_i2c.h>
+
+#include "windfarm.h"
+
+#define VERSION "0.1"
+
+/* This currently only exports the external temperature sensor,
+ since that's all the control loops need. */
+
+/* Some MAX6690 register numbers */
+#define MAX6690_INTERNAL_TEMP 0
+#define MAX6690_EXTERNAL_TEMP 1
+
+struct wf_6690_sensor {
+ struct i2c_client i2c;
+ struct wf_sensor sens;
+};
+
+#define wf_to_6690(x) container_of((x), struct wf_6690_sensor, sens)
+#define i2c_to_6690(x) container_of((x), struct wf_6690_sensor, i2c)
+
+static int wf_max6690_attach(struct i2c_adapter *adapter);
+static int wf_max6690_detach(struct i2c_client *client);
+
+static struct i2c_driver wf_max6690_driver = {
+ .driver = {
+ .name = "wf_max6690",
+ },
+ .attach_adapter = wf_max6690_attach,
+ .detach_client = wf_max6690_detach,
+};
+
+static int wf_max6690_get(struct wf_sensor *sr, s32 *value)
+{
+ struct wf_6690_sensor *max = wf_to_6690(sr);
+ s32 data;
+
+ if (max->i2c.adapter == NULL)
+ return -ENODEV;
+
+ /* chip gets initialized by firmware */
+ data = i2c_smbus_read_byte_data(&max->i2c, MAX6690_EXTERNAL_TEMP);
+ if (data < 0)
+ return data;
+ *value = data << 16;
+ return 0;
+}
+
+static void wf_max6690_release(struct wf_sensor *sr)
+{
+ struct wf_6690_sensor *max = wf_to_6690(sr);
+
+ if (max->i2c.adapter) {
+ i2c_detach_client(&max->i2c);
+ max->i2c.adapter = NULL;
+ }
+ kfree(max);
+}
+
+static struct wf_sensor_ops wf_max6690_ops = {
+ .get_value = wf_max6690_get,
+ .release = wf_max6690_release,
+ .owner = THIS_MODULE,
+};
+
+static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr)
+{
+ struct wf_6690_sensor *max;
+ char *name = "u4-temp";
+
+ max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL);
+ if (max == NULL) {
+ printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor %s: "
+ "no memory\n", name);
+ return;
+ }
+
+ max->sens.ops = &wf_max6690_ops;
+ max->sens.name = name;
+ max->i2c.addr = addr >> 1;
+ max->i2c.adapter = adapter;
+ max->i2c.driver = &wf_max6690_driver;
+ strncpy(max->i2c.name, name, I2C_NAME_SIZE-1);
+
+ if (i2c_attach_client(&max->i2c)) {
+ printk(KERN_ERR "windfarm: failed to attach MAX6690 sensor\n");
+ goto fail;
+ }
+
+ if (wf_register_sensor(&max->sens)) {
+ i2c_detach_client(&max->i2c);
+ goto fail;
+ }
+
+ return;
+
+ fail:
+ kfree(max);
+}
+
+static int wf_max6690_attach(struct i2c_adapter *adapter)
+{
+ struct device_node *busnode, *dev = NULL;
+ struct pmac_i2c_bus *bus;
+ const char *loc;
+ u32 *reg;
+
+ bus = pmac_i2c_adapter_to_bus(adapter);
+ if (bus == NULL)
+ return -ENODEV;
+ busnode = pmac_i2c_get_bus_node(bus);
+
+ while ((dev = of_get_next_child(busnode, dev)) != NULL) {
+ if (!device_is_compatible(dev, "max6690"))
+ continue;
+ loc = get_property(dev, "hwsensor-location", NULL);
+ reg = (u32 *) get_property(dev, "reg", NULL);
+ if (!loc || !reg)
+ continue;
+ printk("found max6690, loc=%s reg=%x\n", loc, *reg);
+ if (strcmp(loc, "BACKSIDE"))
+ continue;
+ wf_max6690_create(adapter, *reg);
+ }
+
+ return 0;
+}
+
+static int wf_max6690_detach(struct i2c_client *client)
+{
+ struct wf_6690_sensor *max = i2c_to_6690(client);
+
+ max->i2c.adapter = NULL;
+ wf_unregister_sensor(&max->sens);
+
+ return 0;
+}
+
+static int __init wf_max6690_sensor_init(void)
+{
+ return i2c_add_driver(&wf_max6690_driver);
+}
+
+static void __exit wf_max6690_sensor_exit(void)
+{
+ i2c_del_driver(&wf_max6690_driver);
+}
+
+module_init(wf_max6690_sensor_init);
+module_exit(wf_max6690_sensor_exit);
+
+MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
+MODULE_DESCRIPTION("MAX6690 sensor objects for PowerMac thermal control");
+MODULE_LICENSE("GPL");
diff --git a/drivers/macintosh/windfarm_pid.c b/drivers/macintosh/windfarm_pid.c
index 2e803b3..0842432 100644
--- a/drivers/macintosh/windfarm_pid.c
+++ b/drivers/macintosh/windfarm_pid.c
@@ -88,8 +88,8 @@
s32 wf_cpu_pid_run(struct wf_cpu_pid_state *st, s32 new_power, s32 new_temp)
{
- s64 error, integ, deriv, prop;
- s32 target, sval, adj;
+ s64 integ, deriv, prop;
+ s32 error, target, sval, adj;
int i, hlen = st->param.history_len;
/* Calculate error term */
@@ -117,7 +117,7 @@
integ += st->errors[(st->index + hlen - i) % hlen];
integ *= st->param.interval;
integ *= st->param.gr;
- sval = st->param.tmax - ((integ >> 20) & 0xffffffff);
+ sval = st->param.tmax - (s32)(integ >> 20);
adj = min(st->param.ttarget, sval);
DBG("integ: %lx, sval: %lx, adj: %lx\n", integ, sval, adj);
@@ -129,7 +129,7 @@
deriv *= st->param.gd;
/* Calculate proportional term */
- prop = (new_temp - adj);
+ prop = st->last_delta = (new_temp - adj);
prop *= st->param.gp;
DBG("deriv: %lx, prop: %lx\n", deriv, prop);
diff --git a/drivers/macintosh/windfarm_pid.h b/drivers/macintosh/windfarm_pid.h
index a364c2a..bbccc22 100644
--- a/drivers/macintosh/windfarm_pid.h
+++ b/drivers/macintosh/windfarm_pid.h
@@ -72,6 +72,7 @@
int index; /* index of current power */
int tindex; /* index of current temp */
s32 target; /* current target value */
+ s32 last_delta; /* last Tactual - Ttarget */
s32 powers[WF_PID_MAX_HISTORY]; /* power history buffer */
s32 errors[WF_PID_MAX_HISTORY]; /* error history buffer */
s32 temps[2]; /* temp. history buffer */
diff --git a/drivers/macintosh/windfarm_pm112.c b/drivers/macintosh/windfarm_pm112.c
new file mode 100644
index 0000000..c2a4e68
--- /dev/null
+++ b/drivers/macintosh/windfarm_pm112.c
@@ -0,0 +1,698 @@
+/*
+ * Windfarm PowerMac thermal control.
+ * Control loops for machines with SMU and PPC970MP processors.
+ *
+ * Copyright (C) 2005 Paul Mackerras, IBM Corp. <paulus@samba.org>
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * Use and redistribute under the terms of the GNU GPL v2.
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <asm/prom.h>
+#include <asm/smu.h>
+
+#include "windfarm.h"
+#include "windfarm_pid.h"
+
+#define VERSION "0.2"
+
+#define DEBUG
+#undef LOTSA_DEBUG
+
+#ifdef DEBUG
+#define DBG(args...) printk(args)
+#else
+#define DBG(args...) do { } while(0)
+#endif
+
+#ifdef LOTSA_DEBUG
+#define DBG_LOTS(args...) printk(args)
+#else
+#define DBG_LOTS(args...) do { } while(0)
+#endif
+
+/* define this to force CPU overtemp to 60 degree, useful for testing
+ * the overtemp code
+ */
+#undef HACKED_OVERTEMP
+
+/* We currently only handle 2 chips, 4 cores... */
+#define NR_CHIPS 2
+#define NR_CORES 4
+#define NR_CPU_FANS 3 * NR_CHIPS
+
+/* Controls and sensors */
+static struct wf_sensor *sens_cpu_temp[NR_CORES];
+static struct wf_sensor *sens_cpu_power[NR_CORES];
+static struct wf_sensor *hd_temp;
+static struct wf_sensor *slots_power;
+static struct wf_sensor *u4_temp;
+
+static struct wf_control *cpu_fans[NR_CPU_FANS];
+static char *cpu_fan_names[NR_CPU_FANS] = {
+ "cpu-rear-fan-0",
+ "cpu-rear-fan-1",
+ "cpu-front-fan-0",
+ "cpu-front-fan-1",
+ "cpu-pump-0",
+ "cpu-pump-1",
+};
+static struct wf_control *cpufreq_clamp;
+
+/* Second pump isn't required (and isn't actually present) */
+#define CPU_FANS_REQD (NR_CPU_FANS - 2)
+#define FIRST_PUMP 4
+#define LAST_PUMP 5
+
+/* We keep a temperature history for average calculation of 180s */
+#define CPU_TEMP_HIST_SIZE 180
+
+/* Scale factor for fan speed, *100 */
+static int cpu_fan_scale[NR_CPU_FANS] = {
+ 100,
+ 100,
+ 97, /* inlet fans run at 97% of exhaust fan */
+ 97,
+ 100, /* updated later */
+ 100, /* updated later */
+};
+
+static struct wf_control *backside_fan;
+static struct wf_control *slots_fan;
+static struct wf_control *drive_bay_fan;
+
+/* PID loop state */
+static struct wf_cpu_pid_state cpu_pid[NR_CORES];
+static u32 cpu_thist[CPU_TEMP_HIST_SIZE];
+static int cpu_thist_pt;
+static s64 cpu_thist_total;
+static s32 cpu_all_tmax = 100 << 16;
+static int cpu_last_target;
+static struct wf_pid_state backside_pid;
+static int backside_tick;
+static struct wf_pid_state slots_pid;
+static int slots_started;
+static struct wf_pid_state drive_bay_pid;
+static int drive_bay_tick;
+
+static int nr_cores;
+static int have_all_controls;
+static int have_all_sensors;
+static int started;
+
+static int failure_state;
+#define FAILURE_SENSOR 1
+#define FAILURE_FAN 2
+#define FAILURE_PERM 4
+#define FAILURE_LOW_OVERTEMP 8
+#define FAILURE_HIGH_OVERTEMP 16
+
+/* Overtemp values */
+#define LOW_OVER_AVERAGE 0
+#define LOW_OVER_IMMEDIATE (10 << 16)
+#define LOW_OVER_CLEAR ((-10) << 16)
+#define HIGH_OVER_IMMEDIATE (14 << 16)
+#define HIGH_OVER_AVERAGE (10 << 16)
+#define HIGH_OVER_IMMEDIATE (14 << 16)
+
+
+/* Implementation... */
+static int create_cpu_loop(int cpu)
+{
+ int chip = cpu / 2;
+ int core = cpu & 1;
+ struct smu_sdbp_header *hdr;
+ struct smu_sdbp_cpupiddata *piddata;
+ struct wf_cpu_pid_param pid;
+ struct wf_control *main_fan = cpu_fans[0];
+ s32 tmax;
+ int fmin;
+
+ /* Get PID params from the appropriate SAT */
+ hdr = smu_sat_get_sdb_partition(chip, 0xC8 + core, NULL);
+ if (hdr == NULL) {
+ printk(KERN_WARNING"windfarm: can't get CPU PID fan config\n");
+ return -EINVAL;
+ }
+ piddata = (struct smu_sdbp_cpupiddata *)&hdr[1];
+
+ /* Get FVT params to get Tmax; if not found, assume default */
+ hdr = smu_sat_get_sdb_partition(chip, 0xC4 + core, NULL);
+ if (hdr) {
+ struct smu_sdbp_fvt *fvt = (struct smu_sdbp_fvt *)&hdr[1];
+ tmax = fvt->maxtemp << 16;
+ } else
+ tmax = 95 << 16; /* default to 95 degrees C */
+
+ /* We keep a global tmax for overtemp calculations */
+ if (tmax < cpu_all_tmax)
+ cpu_all_tmax = tmax;
+
+ /*
+ * Darwin has a minimum fan speed of 1000 rpm for the 4-way and
+ * 515 for the 2-way. That appears to be overkill, so for now,
+ * impose a minimum of 750 or 515.
+ */
+ fmin = (nr_cores > 2) ? 750 : 515;
+
+ /* Initialize PID loop */
+ pid.interval = 1; /* seconds */
+ pid.history_len = piddata->history_len;
+ pid.gd = piddata->gd;
+ pid.gp = piddata->gp;
+ pid.gr = piddata->gr / piddata->history_len;
+ pid.pmaxadj = (piddata->max_power << 16) - (piddata->power_adj << 8);
+ pid.ttarget = tmax - (piddata->target_temp_delta << 16);
+ pid.tmax = tmax;
+ pid.min = main_fan->ops->get_min(main_fan);
+ pid.max = main_fan->ops->get_max(main_fan);
+ if (pid.min < fmin)
+ pid.min = fmin;
+
+ wf_cpu_pid_init(&cpu_pid[cpu], &pid);
+ return 0;
+}
+
+static void cpu_max_all_fans(void)
+{
+ int i;
+
+ /* We max all CPU fans in case of a sensor error. We also do the
+ * cpufreq clamping now, even if it's supposedly done later by the
+ * generic code anyway, we do it earlier here to react faster
+ */
+ if (cpufreq_clamp)
+ wf_control_set_max(cpufreq_clamp);
+ for (i = 0; i < NR_CPU_FANS; ++i)
+ if (cpu_fans[i])
+ wf_control_set_max(cpu_fans[i]);
+}
+
+static int cpu_check_overtemp(s32 temp)
+{
+ int new_state = 0;
+ s32 t_avg, t_old;
+
+ /* First check for immediate overtemps */
+ if (temp >= (cpu_all_tmax + LOW_OVER_IMMEDIATE)) {
+ new_state |= FAILURE_LOW_OVERTEMP;
+ if ((failure_state & FAILURE_LOW_OVERTEMP) == 0)
+ printk(KERN_ERR "windfarm: Overtemp due to immediate CPU"
+ " temperature !\n");
+ }
+ if (temp >= (cpu_all_tmax + HIGH_OVER_IMMEDIATE)) {
+ new_state |= FAILURE_HIGH_OVERTEMP;
+ if ((failure_state & FAILURE_HIGH_OVERTEMP) == 0)
+ printk(KERN_ERR "windfarm: Critical overtemp due to"
+ " immediate CPU temperature !\n");
+ }
+
+ /* We calculate a history of max temperatures and use that for the
+ * overtemp management
+ */
+ t_old = cpu_thist[cpu_thist_pt];
+ cpu_thist[cpu_thist_pt] = temp;
+ cpu_thist_pt = (cpu_thist_pt + 1) % CPU_TEMP_HIST_SIZE;
+ cpu_thist_total -= t_old;
+ cpu_thist_total += temp;
+ t_avg = cpu_thist_total / CPU_TEMP_HIST_SIZE;
+
+ DBG_LOTS("t_avg = %d.%03d (out: %d.%03d, in: %d.%03d)\n",
+ FIX32TOPRINT(t_avg), FIX32TOPRINT(t_old), FIX32TOPRINT(temp));
+
+ /* Now check for average overtemps */
+ if (t_avg >= (cpu_all_tmax + LOW_OVER_AVERAGE)) {
+ new_state |= FAILURE_LOW_OVERTEMP;
+ if ((failure_state & FAILURE_LOW_OVERTEMP) == 0)
+ printk(KERN_ERR "windfarm: Overtemp due to average CPU"
+ " temperature !\n");
+ }
+ if (t_avg >= (cpu_all_tmax + HIGH_OVER_AVERAGE)) {
+ new_state |= FAILURE_HIGH_OVERTEMP;
+ if ((failure_state & FAILURE_HIGH_OVERTEMP) == 0)
+ printk(KERN_ERR "windfarm: Critical overtemp due to"
+ " average CPU temperature !\n");
+ }
+
+ /* Now handle overtemp conditions. We don't currently use the windfarm
+ * overtemp handling core as it's not fully suited to the needs of those
+ * new machine. This will be fixed later.
+ */
+ if (new_state) {
+ /* High overtemp -> immediate shutdown */
+ if (new_state & FAILURE_HIGH_OVERTEMP)
+ machine_power_off();
+ if ((failure_state & new_state) != new_state)
+ cpu_max_all_fans();
+ failure_state |= new_state;
+ } else if ((failure_state & FAILURE_LOW_OVERTEMP) &&
+ (temp < (cpu_all_tmax + LOW_OVER_CLEAR))) {
+ printk(KERN_ERR "windfarm: Overtemp condition cleared !\n");
+ failure_state &= ~FAILURE_LOW_OVERTEMP;
+ }
+
+ return failure_state & (FAILURE_LOW_OVERTEMP | FAILURE_HIGH_OVERTEMP);
+}
+
+static void cpu_fans_tick(void)
+{
+ int err, cpu;
+ s32 greatest_delta = 0;
+ s32 temp, power, t_max = 0;
+ int i, t, target = 0;
+ struct wf_sensor *sr;
+ struct wf_control *ct;
+ struct wf_cpu_pid_state *sp;
+
+ DBG_LOTS(KERN_DEBUG);
+ for (cpu = 0; cpu < nr_cores; ++cpu) {
+ /* Get CPU core temperature */
+ sr = sens_cpu_temp[cpu];
+ err = sr->ops->get_value(sr, &temp);
+ if (err) {
+ DBG("\n");
+ printk(KERN_WARNING "windfarm: CPU %d temperature "
+ "sensor error %d\n", cpu, err);
+ failure_state |= FAILURE_SENSOR;
+ cpu_max_all_fans();
+ return;
+ }
+
+ /* Keep track of highest temp */
+ t_max = max(t_max, temp);
+
+ /* Get CPU power */
+ sr = sens_cpu_power[cpu];
+ err = sr->ops->get_value(sr, &power);
+ if (err) {
+ DBG("\n");
+ printk(KERN_WARNING "windfarm: CPU %d power "
+ "sensor error %d\n", cpu, err);
+ failure_state |= FAILURE_SENSOR;
+ cpu_max_all_fans();
+ return;
+ }
+
+ /* Run PID */
+ sp = &cpu_pid[cpu];
+ t = wf_cpu_pid_run(sp, power, temp);
+
+ if (cpu == 0 || sp->last_delta > greatest_delta) {
+ greatest_delta = sp->last_delta;
+ target = t;
+ }
+ DBG_LOTS("[%d] P=%d.%.3d T=%d.%.3d ",
+ cpu, FIX32TOPRINT(power), FIX32TOPRINT(temp));
+ }
+ DBG_LOTS("fans = %d, t_max = %d.%03d\n", target, FIX32TOPRINT(t_max));
+
+ /* Darwin limits decrease to 20 per iteration */
+ if (target < (cpu_last_target - 20))
+ target = cpu_last_target - 20;
+ cpu_last_target = target;
+ for (cpu = 0; cpu < nr_cores; ++cpu)
+ cpu_pid[cpu].target = target;
+
+ /* Handle possible overtemps */
+ if (cpu_check_overtemp(t_max))
+ return;
+
+ /* Set fans */
+ for (i = 0; i < NR_CPU_FANS; ++i) {
+ ct = cpu_fans[i];
+ if (ct == NULL)
+ continue;
+ err = ct->ops->set_value(ct, target * cpu_fan_scale[i] / 100);
+ if (err) {
+ printk(KERN_WARNING "windfarm: fan %s reports "
+ "error %d\n", ct->name, err);
+ failure_state |= FAILURE_FAN;
+ break;
+ }
+ }
+}
+
+/* Backside/U4 fan */
+static struct wf_pid_param backside_param = {
+ .interval = 5,
+ .history_len = 2,
+ .gd = 48 << 20,
+ .gp = 5 << 20,
+ .gr = 0,
+ .itarget = 64 << 16,
+ .additive = 1,
+};
+
+static void backside_fan_tick(void)
+{
+ s32 temp;
+ int speed;
+ int err;
+
+ if (!backside_fan || !u4_temp)
+ return;
+ if (!backside_tick) {
+ /* first time; initialize things */
+ backside_param.min = backside_fan->ops->get_min(backside_fan);
+ backside_param.max = backside_fan->ops->get_max(backside_fan);
+ wf_pid_init(&backside_pid, &backside_param);
+ backside_tick = 1;
+ }
+ if (--backside_tick > 0)
+ return;
+ backside_tick = backside_pid.param.interval;
+
+ err = u4_temp->ops->get_value(u4_temp, &temp);
+ if (err) {
+ printk(KERN_WARNING "windfarm: U4 temp sensor error %d\n",
+ err);
+ failure_state |= FAILURE_SENSOR;
+ wf_control_set_max(backside_fan);
+ return;
+ }
+ speed = wf_pid_run(&backside_pid, temp);
+ DBG_LOTS("backside PID temp=%d.%.3d speed=%d\n",
+ FIX32TOPRINT(temp), speed);
+
+ err = backside_fan->ops->set_value(backside_fan, speed);
+ if (err) {
+ printk(KERN_WARNING "windfarm: backside fan error %d\n", err);
+ failure_state |= FAILURE_FAN;
+ }
+}
+
+/* Drive bay fan */
+static struct wf_pid_param drive_bay_prm = {
+ .interval = 5,
+ .history_len = 2,
+ .gd = 30 << 20,
+ .gp = 5 << 20,
+ .gr = 0,
+ .itarget = 40 << 16,
+ .additive = 1,
+};
+
+static void drive_bay_fan_tick(void)
+{
+ s32 temp;
+ int speed;
+ int err;
+
+ if (!drive_bay_fan || !hd_temp)
+ return;
+ if (!drive_bay_tick) {
+ /* first time; initialize things */
+ drive_bay_prm.min = drive_bay_fan->ops->get_min(drive_bay_fan);
+ drive_bay_prm.max = drive_bay_fan->ops->get_max(drive_bay_fan);
+ wf_pid_init(&drive_bay_pid, &drive_bay_prm);
+ drive_bay_tick = 1;
+ }
+ if (--drive_bay_tick > 0)
+ return;
+ drive_bay_tick = drive_bay_pid.param.interval;
+
+ err = hd_temp->ops->get_value(hd_temp, &temp);
+ if (err) {
+ printk(KERN_WARNING "windfarm: drive bay temp sensor "
+ "error %d\n", err);
+ failure_state |= FAILURE_SENSOR;
+ wf_control_set_max(drive_bay_fan);
+ return;
+ }
+ speed = wf_pid_run(&drive_bay_pid, temp);
+ DBG_LOTS("drive_bay PID temp=%d.%.3d speed=%d\n",
+ FIX32TOPRINT(temp), speed);
+
+ err = drive_bay_fan->ops->set_value(drive_bay_fan, speed);
+ if (err) {
+ printk(KERN_WARNING "windfarm: drive bay fan error %d\n", err);
+ failure_state |= FAILURE_FAN;
+ }
+}
+
+/* PCI slots area fan */
+/* This makes the fan speed proportional to the power consumed */
+static struct wf_pid_param slots_param = {
+ .interval = 1,
+ .history_len = 2,
+ .gd = 0,
+ .gp = 0,
+ .gr = 0x1277952,
+ .itarget = 0,
+ .min = 1560,
+ .max = 3510,
+};
+
+static void slots_fan_tick(void)
+{
+ s32 power;
+ int speed;
+ int err;
+
+ if (!slots_fan || !slots_power)
+ return;
+ if (!slots_started) {
+ /* first time; initialize things */
+ wf_pid_init(&slots_pid, &slots_param);
+ slots_started = 1;
+ }
+
+ err = slots_power->ops->get_value(slots_power, &power);
+ if (err) {
+ printk(KERN_WARNING "windfarm: slots power sensor error %d\n",
+ err);
+ failure_state |= FAILURE_SENSOR;
+ wf_control_set_max(slots_fan);
+ return;
+ }
+ speed = wf_pid_run(&slots_pid, power);
+ DBG_LOTS("slots PID power=%d.%.3d speed=%d\n",
+ FIX32TOPRINT(power), speed);
+
+ err = slots_fan->ops->set_value(slots_fan, speed);
+ if (err) {
+ printk(KERN_WARNING "windfarm: slots fan error %d\n", err);
+ failure_state |= FAILURE_FAN;
+ }
+}
+
+static void set_fail_state(void)
+{
+ int i;
+
+ if (cpufreq_clamp)
+ wf_control_set_max(cpufreq_clamp);
+ for (i = 0; i < NR_CPU_FANS; ++i)
+ if (cpu_fans[i])
+ wf_control_set_max(cpu_fans[i]);
+ if (backside_fan)
+ wf_control_set_max(backside_fan);
+ if (slots_fan)
+ wf_control_set_max(slots_fan);
+ if (drive_bay_fan)
+ wf_control_set_max(drive_bay_fan);
+}
+
+static void pm112_tick(void)
+{
+ int i, last_failure;
+
+ if (!started) {
+ started = 1;
+ for (i = 0; i < nr_cores; ++i) {
+ if (create_cpu_loop(i) < 0) {
+ failure_state = FAILURE_PERM;
+ set_fail_state();
+ break;
+ }
+ }
+ DBG_LOTS("cpu_all_tmax=%d.%03d\n", FIX32TOPRINT(cpu_all_tmax));
+
+#ifdef HACKED_OVERTEMP
+ cpu_all_tmax = 60 << 16;
+#endif
+ }
+
+ /* Permanent failure, bail out */
+ if (failure_state & FAILURE_PERM)
+ return;
+ /* Clear all failure bits except low overtemp which will be eventually
+ * cleared by the control loop itself
+ */
+ last_failure = failure_state;
+ failure_state &= FAILURE_LOW_OVERTEMP;
+ cpu_fans_tick();
+ backside_fan_tick();
+ slots_fan_tick();
+ drive_bay_fan_tick();
+
+ DBG_LOTS("last_failure: 0x%x, failure_state: %x\n",
+ last_failure, failure_state);
+
+ /* Check for failures. Any failure causes cpufreq clamping */
+ if (failure_state && last_failure == 0 && cpufreq_clamp)
+ wf_control_set_max(cpufreq_clamp);
+ if (failure_state == 0 && last_failure && cpufreq_clamp)
+ wf_control_set_min(cpufreq_clamp);
+
+ /* That's it for now, we might want to deal with other failures
+ * differently in the future though
+ */
+}
+
+static void pm112_new_control(struct wf_control *ct)
+{
+ int i, max_exhaust;
+
+ if (cpufreq_clamp == NULL && !strcmp(ct->name, "cpufreq-clamp")) {
+ if (wf_get_control(ct) == 0)
+ cpufreq_clamp = ct;
+ }
+
+ for (i = 0; i < NR_CPU_FANS; ++i) {
+ if (!strcmp(ct->name, cpu_fan_names[i])) {
+ if (cpu_fans[i] == NULL && wf_get_control(ct) == 0)
+ cpu_fans[i] = ct;
+ break;
+ }
+ }
+ if (i >= NR_CPU_FANS) {
+ /* not a CPU fan, try the others */
+ if (!strcmp(ct->name, "backside-fan")) {
+ if (backside_fan == NULL && wf_get_control(ct) == 0)
+ backside_fan = ct;
+ } else if (!strcmp(ct->name, "slots-fan")) {
+ if (slots_fan == NULL && wf_get_control(ct) == 0)
+ slots_fan = ct;
+ } else if (!strcmp(ct->name, "drive-bay-fan")) {
+ if (drive_bay_fan == NULL && wf_get_control(ct) == 0)
+ drive_bay_fan = ct;
+ }
+ return;
+ }
+
+ for (i = 0; i < CPU_FANS_REQD; ++i)
+ if (cpu_fans[i] == NULL)
+ return;
+
+ /* work out pump scaling factors */
+ max_exhaust = cpu_fans[0]->ops->get_max(cpu_fans[0]);
+ for (i = FIRST_PUMP; i <= LAST_PUMP; ++i)
+ if ((ct = cpu_fans[i]) != NULL)
+ cpu_fan_scale[i] =
+ ct->ops->get_max(ct) * 100 / max_exhaust;
+
+ have_all_controls = 1;
+}
+
+static void pm112_new_sensor(struct wf_sensor *sr)
+{
+ unsigned int i;
+
+ if (have_all_sensors)
+ return;
+ if (!strncmp(sr->name, "cpu-temp-", 9)) {
+ i = sr->name[9] - '0';
+ if (sr->name[10] == 0 && i < NR_CORES &&
+ sens_cpu_temp[i] == NULL && wf_get_sensor(sr) == 0)
+ sens_cpu_temp[i] = sr;
+
+ } else if (!strncmp(sr->name, "cpu-power-", 10)) {
+ i = sr->name[10] - '0';
+ if (sr->name[11] == 0 && i < NR_CORES &&
+ sens_cpu_power[i] == NULL && wf_get_sensor(sr) == 0)
+ sens_cpu_power[i] = sr;
+ } else if (!strcmp(sr->name, "hd-temp")) {
+ if (hd_temp == NULL && wf_get_sensor(sr) == 0)
+ hd_temp = sr;
+ } else if (!strcmp(sr->name, "slots-power")) {
+ if (slots_power == NULL && wf_get_sensor(sr) == 0)
+ slots_power = sr;
+ } else if (!strcmp(sr->name, "u4-temp")) {
+ if (u4_temp == NULL && wf_get_sensor(sr) == 0)
+ u4_temp = sr;
+ } else
+ return;
+
+ /* check if we have all the sensors we need */
+ for (i = 0; i < nr_cores; ++i)
+ if (sens_cpu_temp[i] == NULL || sens_cpu_power[i] == NULL)
+ return;
+
+ have_all_sensors = 1;
+}
+
+static int pm112_wf_notify(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ switch (event) {
+ case WF_EVENT_NEW_SENSOR:
+ pm112_new_sensor(data);
+ break;
+ case WF_EVENT_NEW_CONTROL:
+ pm112_new_control(data);
+ break;
+ case WF_EVENT_TICK:
+ if (have_all_controls && have_all_sensors)
+ pm112_tick();
+ }
+ return 0;
+}
+
+static struct notifier_block pm112_events = {
+ .notifier_call = pm112_wf_notify,
+};
+
+static int wf_pm112_probe(struct device *dev)
+{
+ wf_register_client(&pm112_events);
+ return 0;
+}
+
+static int wf_pm112_remove(struct device *dev)
+{
+ wf_unregister_client(&pm112_events);
+ /* should release all sensors and controls */
+ return 0;
+}
+
+static struct device_driver wf_pm112_driver = {
+ .name = "windfarm",
+ .bus = &platform_bus_type,
+ .probe = wf_pm112_probe,
+ .remove = wf_pm112_remove,
+};
+
+static int __init wf_pm112_init(void)
+{
+ struct device_node *cpu;
+
+ if (!machine_is_compatible("PowerMac11,2"))
+ return -ENODEV;
+
+ /* Count the number of CPU cores */
+ nr_cores = 0;
+ for (cpu = NULL; (cpu = of_find_node_by_type(cpu, "cpu")) != NULL; )
+ ++nr_cores;
+
+ printk(KERN_INFO "windfarm: initializing for dual-core desktop G5\n");
+ driver_register(&wf_pm112_driver);
+ return 0;
+}
+
+static void __exit wf_pm112_exit(void)
+{
+ driver_unregister(&wf_pm112_driver);
+}
+
+module_init(wf_pm112_init);
+module_exit(wf_pm112_exit);
+
+MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
+MODULE_DESCRIPTION("Thermal control for PowerMac11,2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c
index eb69a60..f1df6ef 100644
--- a/drivers/macintosh/windfarm_pm81.c
+++ b/drivers/macintosh/windfarm_pm81.c
@@ -538,45 +538,6 @@
}
}
-
-/*
- * ****** Attributes ******
- *
- */
-
-#define BUILD_SHOW_FUNC_FIX(name, data) \
-static ssize_t show_##name(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- ssize_t r; \
- s32 val = 0; \
- data->ops->get_value(data, &val); \
- r = sprintf(buf, "%d.%03d", FIX32TOPRINT(val)); \
- return r; \
-} \
-static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
-
-
-#define BUILD_SHOW_FUNC_INT(name, data) \
-static ssize_t show_##name(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- s32 val = 0; \
- data->ops->get_value(data, &val); \
- return sprintf(buf, "%d", val); \
-} \
-static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
-
-BUILD_SHOW_FUNC_INT(cpu_fan, fan_cpu_main);
-BUILD_SHOW_FUNC_INT(sys_fan, fan_system);
-BUILD_SHOW_FUNC_INT(hd_fan, fan_hd);
-
-BUILD_SHOW_FUNC_FIX(cpu_temp, sensor_cpu_temp);
-BUILD_SHOW_FUNC_FIX(cpu_power, sensor_cpu_power);
-BUILD_SHOW_FUNC_FIX(hd_temp, sensor_hd_temp);
-
/*
* ****** Setup / Init / Misc ... ******
*
@@ -654,17 +615,13 @@
return;
if (fan_cpu_main == NULL && !strcmp(ct->name, "cpu-fan")) {
- if (wf_get_control(ct) == 0) {
+ if (wf_get_control(ct) == 0)
fan_cpu_main = ct;
- device_create_file(wf_smu_dev, &dev_attr_cpu_fan);
- }
}
if (fan_system == NULL && !strcmp(ct->name, "system-fan")) {
- if (wf_get_control(ct) == 0) {
+ if (wf_get_control(ct) == 0)
fan_system = ct;
- device_create_file(wf_smu_dev, &dev_attr_sys_fan);
- }
}
if (cpufreq_clamp == NULL && !strcmp(ct->name, "cpufreq-clamp")) {
@@ -683,10 +640,8 @@
}
if (fan_hd == NULL && !strcmp(ct->name, "drive-bay-fan")) {
- if (wf_get_control(ct) == 0) {
+ if (wf_get_control(ct) == 0)
fan_hd = ct;
- device_create_file(wf_smu_dev, &dev_attr_hd_fan);
- }
}
if (fan_system && fan_hd && fan_cpu_main && cpufreq_clamp)
@@ -699,24 +654,18 @@
return;
if (sensor_cpu_power == NULL && !strcmp(sr->name, "cpu-power")) {
- if (wf_get_sensor(sr) == 0) {
+ if (wf_get_sensor(sr) == 0)
sensor_cpu_power = sr;
- device_create_file(wf_smu_dev, &dev_attr_cpu_power);
- }
}
if (sensor_cpu_temp == NULL && !strcmp(sr->name, "cpu-temp")) {
- if (wf_get_sensor(sr) == 0) {
+ if (wf_get_sensor(sr) == 0)
sensor_cpu_temp = sr;
- device_create_file(wf_smu_dev, &dev_attr_cpu_temp);
- }
}
if (sensor_hd_temp == NULL && !strcmp(sr->name, "hd-temp")) {
- if (wf_get_sensor(sr) == 0) {
+ if (wf_get_sensor(sr) == 0)
sensor_hd_temp = sr;
- device_create_file(wf_smu_dev, &dev_attr_hd_temp);
- }
}
if (sensor_cpu_power && sensor_cpu_temp && sensor_hd_temp)
@@ -794,32 +743,20 @@
* with that except by adding locks all over... I'll do that
* eventually but heh, who ever rmmod this module anyway ?
*/
- if (sensor_cpu_power) {
- device_remove_file(wf_smu_dev, &dev_attr_cpu_power);
+ if (sensor_cpu_power)
wf_put_sensor(sensor_cpu_power);
- }
- if (sensor_cpu_temp) {
- device_remove_file(wf_smu_dev, &dev_attr_cpu_temp);
+ if (sensor_cpu_temp)
wf_put_sensor(sensor_cpu_temp);
- }
- if (sensor_hd_temp) {
- device_remove_file(wf_smu_dev, &dev_attr_hd_temp);
+ if (sensor_hd_temp)
wf_put_sensor(sensor_hd_temp);
- }
/* Release all controls */
- if (fan_cpu_main) {
- device_remove_file(wf_smu_dev, &dev_attr_cpu_fan);
+ if (fan_cpu_main)
wf_put_control(fan_cpu_main);
- }
- if (fan_hd) {
- device_remove_file(wf_smu_dev, &dev_attr_hd_fan);
+ if (fan_hd)
wf_put_control(fan_hd);
- }
- if (fan_system) {
- device_remove_file(wf_smu_dev, &dev_attr_sys_fan);
+ if (fan_system)
wf_put_control(fan_system);
- }
if (cpufreq_clamp)
wf_put_control(cpufreq_clamp);
diff --git a/drivers/macintosh/windfarm_pm91.c b/drivers/macintosh/windfarm_pm91.c
index 43243cf..0d6372e 100644
--- a/drivers/macintosh/windfarm_pm91.c
+++ b/drivers/macintosh/windfarm_pm91.c
@@ -458,45 +458,6 @@
/*
- * ****** Attributes ******
- *
- */
-
-#define BUILD_SHOW_FUNC_FIX(name, data) \
-static ssize_t show_##name(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- ssize_t r; \
- s32 val = 0; \
- data->ops->get_value(data, &val); \
- r = sprintf(buf, "%d.%03d", FIX32TOPRINT(val)); \
- return r; \
-} \
-static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
-
-
-#define BUILD_SHOW_FUNC_INT(name, data) \
-static ssize_t show_##name(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- s32 val = 0; \
- data->ops->get_value(data, &val); \
- return sprintf(buf, "%d", val); \
-} \
-static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
-
-BUILD_SHOW_FUNC_INT(cpu_fan, fan_cpu_main);
-BUILD_SHOW_FUNC_INT(hd_fan, fan_hd);
-BUILD_SHOW_FUNC_INT(slots_fan, fan_slots);
-
-BUILD_SHOW_FUNC_FIX(cpu_temp, sensor_cpu_temp);
-BUILD_SHOW_FUNC_FIX(cpu_power, sensor_cpu_power);
-BUILD_SHOW_FUNC_FIX(hd_temp, sensor_hd_temp);
-BUILD_SHOW_FUNC_FIX(slots_power, sensor_slots_power);
-
-/*
* ****** Setup / Init / Misc ... ******
*
*/
@@ -581,10 +542,8 @@
return;
if (fan_cpu_main == NULL && !strcmp(ct->name, "cpu-rear-fan-0")) {
- if (wf_get_control(ct) == 0) {
+ if (wf_get_control(ct) == 0)
fan_cpu_main = ct;
- device_create_file(wf_smu_dev, &dev_attr_cpu_fan);
- }
}
if (fan_cpu_second == NULL && !strcmp(ct->name, "cpu-rear-fan-1")) {
@@ -603,17 +562,13 @@
}
if (fan_hd == NULL && !strcmp(ct->name, "drive-bay-fan")) {
- if (wf_get_control(ct) == 0) {
+ if (wf_get_control(ct) == 0)
fan_hd = ct;
- device_create_file(wf_smu_dev, &dev_attr_hd_fan);
- }
}
if (fan_slots == NULL && !strcmp(ct->name, "slots-fan")) {
- if (wf_get_control(ct) == 0) {
+ if (wf_get_control(ct) == 0)
fan_slots = ct;
- device_create_file(wf_smu_dev, &dev_attr_slots_fan);
- }
}
if (fan_cpu_main && (fan_cpu_second || fan_cpu_third) && fan_hd &&
@@ -627,31 +582,23 @@
return;
if (sensor_cpu_power == NULL && !strcmp(sr->name, "cpu-power")) {
- if (wf_get_sensor(sr) == 0) {
+ if (wf_get_sensor(sr) == 0)
sensor_cpu_power = sr;
- device_create_file(wf_smu_dev, &dev_attr_cpu_power);
- }
}
if (sensor_cpu_temp == NULL && !strcmp(sr->name, "cpu-temp")) {
- if (wf_get_sensor(sr) == 0) {
+ if (wf_get_sensor(sr) == 0)
sensor_cpu_temp = sr;
- device_create_file(wf_smu_dev, &dev_attr_cpu_temp);
- }
}
if (sensor_hd_temp == NULL && !strcmp(sr->name, "hd-temp")) {
- if (wf_get_sensor(sr) == 0) {
+ if (wf_get_sensor(sr) == 0)
sensor_hd_temp = sr;
- device_create_file(wf_smu_dev, &dev_attr_hd_temp);
- }
}
if (sensor_slots_power == NULL && !strcmp(sr->name, "slots-power")) {
- if (wf_get_sensor(sr) == 0) {
+ if (wf_get_sensor(sr) == 0)
sensor_slots_power = sr;
- device_create_file(wf_smu_dev, &dev_attr_slots_power);
- }
}
if (sensor_cpu_power && sensor_cpu_temp &&
@@ -720,40 +667,26 @@
* with that except by adding locks all over... I'll do that
* eventually but heh, who ever rmmod this module anyway ?
*/
- if (sensor_cpu_power) {
- device_remove_file(wf_smu_dev, &dev_attr_cpu_power);
+ if (sensor_cpu_power)
wf_put_sensor(sensor_cpu_power);
- }
- if (sensor_cpu_temp) {
- device_remove_file(wf_smu_dev, &dev_attr_cpu_temp);
+ if (sensor_cpu_temp)
wf_put_sensor(sensor_cpu_temp);
- }
- if (sensor_hd_temp) {
- device_remove_file(wf_smu_dev, &dev_attr_hd_temp);
+ if (sensor_hd_temp)
wf_put_sensor(sensor_hd_temp);
- }
- if (sensor_slots_power) {
- device_remove_file(wf_smu_dev, &dev_attr_slots_power);
+ if (sensor_slots_power)
wf_put_sensor(sensor_slots_power);
- }
/* Release all controls */
- if (fan_cpu_main) {
- device_remove_file(wf_smu_dev, &dev_attr_cpu_fan);
+ if (fan_cpu_main)
wf_put_control(fan_cpu_main);
- }
if (fan_cpu_second)
wf_put_control(fan_cpu_second);
if (fan_cpu_third)
wf_put_control(fan_cpu_third);
- if (fan_hd) {
- device_remove_file(wf_smu_dev, &dev_attr_hd_fan);
+ if (fan_hd)
wf_put_control(fan_hd);
- }
- if (fan_slots) {
- device_remove_file(wf_smu_dev, &dev_attr_slots_fan);
+ if (fan_slots)
wf_put_control(fan_slots);
- }
if (cpufreq_clamp)
wf_put_control(cpufreq_clamp);
diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c
index 4d81160..a9e88ed 100644
--- a/drivers/macintosh/windfarm_smu_controls.c
+++ b/drivers/macintosh/windfarm_smu_controls.c
@@ -24,7 +24,7 @@
#include "windfarm.h"
-#define VERSION "0.3"
+#define VERSION "0.4"
#undef DEBUG
@@ -34,6 +34,8 @@
#define DBG(args...) do { } while(0)
#endif
+static int smu_supports_new_fans_ops = 1;
+
/*
* SMU fans control object
*/
@@ -59,23 +61,49 @@
/* Fill SMU command structure */
cmd.cmd = SMU_CMD_FAN_COMMAND;
- cmd.data_len = 14;
+
+ /* The SMU has an "old" and a "new" way of setting the fan speed
+ * Unfortunately, I found no reliable way to know which one works
+ * on a given machine model. After some investigations it appears
+ * that MacOS X just tries the new one, and if it fails fallbacks
+ * to the old ones ... Ugh.
+ */
+ retry:
+ if (smu_supports_new_fans_ops) {
+ buffer[0] = 0x30;
+ buffer[1] = id;
+ *((u16 *)(&buffer[2])) = value;
+ cmd.data_len = 4;
+ } else {
+ if (id > 7)
+ return -EINVAL;
+ /* Fill argument buffer */
+ memset(buffer, 0, 16);
+ buffer[0] = pwm ? 0x10 : 0x00;
+ buffer[1] = 0x01 << id;
+ *((u16 *)&buffer[2 + id * 2]) = value;
+ cmd.data_len = 14;
+ }
+
cmd.reply_len = 16;
cmd.data_buf = cmd.reply_buf = buffer;
cmd.status = 0;
cmd.done = smu_done_complete;
cmd.misc = ∁
- /* Fill argument buffer */
- memset(buffer, 0, 16);
- buffer[0] = pwm ? 0x10 : 0x00;
- buffer[1] = 0x01 << id;
- *((u16 *)&buffer[2 + id * 2]) = value;
-
rc = smu_queue_cmd(&cmd);
if (rc)
return rc;
wait_for_completion(&comp);
+
+ /* Handle fallback (see coment above) */
+ if (cmd.status != 0 && smu_supports_new_fans_ops) {
+ printk(KERN_WARNING "windfarm: SMU failed new fan command "
+ "falling back to old method\n");
+ smu_supports_new_fans_ops = 0;
+ goto retry;
+ }
+
return cmd.status;
}
@@ -158,19 +186,29 @@
/* Names used on desktop models */
if (!strcmp(l, "Rear Fan 0") || !strcmp(l, "Rear Fan") ||
- !strcmp(l, "Rear fan 0") || !strcmp(l, "Rear fan"))
+ !strcmp(l, "Rear fan 0") || !strcmp(l, "Rear fan") ||
+ !strcmp(l, "CPU A EXHAUST"))
fct->ctrl.name = "cpu-rear-fan-0";
- else if (!strcmp(l, "Rear Fan 1") || !strcmp(l, "Rear fan 1"))
+ else if (!strcmp(l, "Rear Fan 1") || !strcmp(l, "Rear fan 1") ||
+ !strcmp(l, "CPU B EXHAUST"))
fct->ctrl.name = "cpu-rear-fan-1";
else if (!strcmp(l, "Front Fan 0") || !strcmp(l, "Front Fan") ||
- !strcmp(l, "Front fan 0") || !strcmp(l, "Front fan"))
+ !strcmp(l, "Front fan 0") || !strcmp(l, "Front fan") ||
+ !strcmp(l, "CPU A INTAKE"))
fct->ctrl.name = "cpu-front-fan-0";
- else if (!strcmp(l, "Front Fan 1") || !strcmp(l, "Front fan 1"))
+ else if (!strcmp(l, "Front Fan 1") || !strcmp(l, "Front fan 1") ||
+ !strcmp(l, "CPU B INTAKE"))
fct->ctrl.name = "cpu-front-fan-1";
- else if (!strcmp(l, "Slots Fan") || !strcmp(l, "Slots fan"))
+ else if (!strcmp(l, "CPU A PUMP"))
+ fct->ctrl.name = "cpu-pump-0";
+ else if (!strcmp(l, "Slots Fan") || !strcmp(l, "Slots fan") ||
+ !strcmp(l, "EXPANSION SLOTS INTAKE"))
fct->ctrl.name = "slots-fan";
- else if (!strcmp(l, "Drive Bay") || !strcmp(l, "Drive bay"))
+ else if (!strcmp(l, "Drive Bay") || !strcmp(l, "Drive bay") ||
+ !strcmp(l, "DRIVE BAY A INTAKE"))
fct->ctrl.name = "drive-bay-fan";
+ else if (!strcmp(l, "BACKSIDE"))
+ fct->ctrl.name = "backside-fan";
/* Names used on iMac models */
if (!strcmp(l, "System Fan") || !strcmp(l, "System fan"))
@@ -223,7 +261,8 @@
/* Look for RPM fans */
for (fans = NULL; (fans = of_get_next_child(smu, fans)) != NULL;)
- if (!strcmp(fans->name, "rpm-fans"))
+ if (!strcmp(fans->name, "rpm-fans") ||
+ device_is_compatible(fans, "smu-rpm-fans"))
break;
for (fan = NULL;
fans && (fan = of_get_next_child(fans, fan)) != NULL;) {
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
new file mode 100644
index 0000000..3a32c59
--- /dev/null
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -0,0 +1,418 @@
+/*
+ * Windfarm PowerMac thermal control. SMU "satellite" controller sensors.
+ *
+ * Copyright (C) 2005 Paul Mackerras, IBM Corp. <paulus@samba.org>
+ *
+ * Released under the terms of the GNU GPL v2.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/i2c.h>
+#include <linux/i2c-dev.h>
+#include <asm/semaphore.h>
+#include <asm/prom.h>
+#include <asm/smu.h>
+#include <asm/pmac_low_i2c.h>
+
+#include "windfarm.h"
+
+#define VERSION "0.2"
+
+#define DEBUG
+
+#ifdef DEBUG
+#define DBG(args...) printk(args)
+#else
+#define DBG(args...) do { } while(0)
+#endif
+
+/* If the cache is older than 800ms we'll refetch it */
+#define MAX_AGE msecs_to_jiffies(800)
+
+struct wf_sat {
+ int nr;
+ atomic_t refcnt;
+ struct semaphore mutex;
+ unsigned long last_read; /* jiffies when cache last updated */
+ u8 cache[16];
+ struct i2c_client i2c;
+ struct device_node *node;
+};
+
+static struct wf_sat *sats[2];
+
+struct wf_sat_sensor {
+ int index;
+ int index2; /* used for power sensors */
+ int shift;
+ struct wf_sat *sat;
+ struct wf_sensor sens;
+};
+
+#define wf_to_sat(c) container_of(c, struct wf_sat_sensor, sens)
+#define i2c_to_sat(c) container_of(c, struct wf_sat, i2c)
+
+static int wf_sat_attach(struct i2c_adapter *adapter);
+static int wf_sat_detach(struct i2c_client *client);
+
+static struct i2c_driver wf_sat_driver = {
+ .driver = {
+ .name = "wf_smu_sat",
+ },
+ .attach_adapter = wf_sat_attach,
+ .detach_client = wf_sat_detach,
+};
+
+/*
+ * XXX i2c_smbus_read_i2c_block_data doesn't pass the requested
+ * length down to the low-level driver, so we use this, which
+ * works well enough with the SMU i2c driver code...
+ */
+static int sat_read_block(struct i2c_client *client, u8 command,
+ u8 *values, int len)
+{
+ union i2c_smbus_data data;
+ int err;
+
+ data.block[0] = len;
+ err = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, command, I2C_SMBUS_I2C_BLOCK_DATA,
+ &data);
+ if (!err)
+ memcpy(values, data.block, len);
+ return err;
+}
+
+struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
+ unsigned int *size)
+{
+ struct wf_sat *sat;
+ int err;
+ unsigned int i, len;
+ u8 *buf;
+ u8 data[4];
+
+ /* TODO: Add the resulting partition to the device-tree */
+
+ if (sat_id > 1 || (sat = sats[sat_id]) == NULL)
+ return NULL;
+
+ err = i2c_smbus_write_word_data(&sat->i2c, 8, id << 8);
+ if (err) {
+ printk(KERN_ERR "smu_sat_get_sdb_part wr error %d\n", err);
+ return NULL;
+ }
+
+ len = i2c_smbus_read_word_data(&sat->i2c, 9);
+ if (len < 0) {
+ printk(KERN_ERR "smu_sat_get_sdb_part rd len error\n");
+ return NULL;
+ }
+ if (len == 0) {
+ printk(KERN_ERR "smu_sat_get_sdb_part no partition %x\n", id);
+ return NULL;
+ }
+
+ len = le16_to_cpu(len);
+ len = (len + 3) & ~3;
+ buf = kmalloc(len, GFP_KERNEL);
+ if (buf == NULL)
+ return NULL;
+
+ for (i = 0; i < len; i += 4) {
+ err = sat_read_block(&sat->i2c, 0xa, data, 4);
+ if (err) {
+ printk(KERN_ERR "smu_sat_get_sdb_part rd err %d\n",
+ err);
+ goto fail;
+ }
+ buf[i] = data[1];
+ buf[i+1] = data[0];
+ buf[i+2] = data[3];
+ buf[i+3] = data[2];
+ }
+#ifdef DEBUG
+ DBG(KERN_DEBUG "sat %d partition %x:", sat_id, id);
+ for (i = 0; i < len; ++i)
+ DBG(" %x", buf[i]);
+ DBG("\n");
+#endif
+
+ if (size)
+ *size = len;
+ return (struct smu_sdbp_header *) buf;
+
+ fail:
+ kfree(buf);
+ return NULL;
+}
+
+/* refresh the cache */
+static int wf_sat_read_cache(struct wf_sat *sat)
+{
+ int err;
+
+ err = sat_read_block(&sat->i2c, 0x3f, sat->cache, 16);
+ if (err)
+ return err;
+ sat->last_read = jiffies;
+#ifdef LOTSA_DEBUG
+ {
+ int i;
+ DBG(KERN_DEBUG "wf_sat_get: data is");
+ for (i = 0; i < 16; ++i)
+ DBG(" %.2x", sat->cache[i]);
+ DBG("\n");
+ }
+#endif
+ return 0;
+}
+
+static int wf_sat_get(struct wf_sensor *sr, s32 *value)
+{
+ struct wf_sat_sensor *sens = wf_to_sat(sr);
+ struct wf_sat *sat = sens->sat;
+ int i, err;
+ s32 val;
+
+ if (sat->i2c.adapter == NULL)
+ return -ENODEV;
+
+ down(&sat->mutex);
+ if (time_after(jiffies, (sat->last_read + MAX_AGE))) {
+ err = wf_sat_read_cache(sat);
+ if (err)
+ goto fail;
+ }
+
+ i = sens->index * 2;
+ val = ((sat->cache[i] << 8) + sat->cache[i+1]) << sens->shift;
+ if (sens->index2 >= 0) {
+ i = sens->index2 * 2;
+ /* 4.12 * 8.8 -> 12.20; shift right 4 to get 16.16 */
+ val = (val * ((sat->cache[i] << 8) + sat->cache[i+1])) >> 4;
+ }
+
+ *value = val;
+ err = 0;
+
+ fail:
+ up(&sat->mutex);
+ return err;
+}
+
+static void wf_sat_release(struct wf_sensor *sr)
+{
+ struct wf_sat_sensor *sens = wf_to_sat(sr);
+ struct wf_sat *sat = sens->sat;
+
+ if (atomic_dec_and_test(&sat->refcnt)) {
+ if (sat->i2c.adapter) {
+ i2c_detach_client(&sat->i2c);
+ sat->i2c.adapter = NULL;
+ }
+ if (sat->nr >= 0)
+ sats[sat->nr] = NULL;
+ kfree(sat);
+ }
+ kfree(sens);
+}
+
+static struct wf_sensor_ops wf_sat_ops = {
+ .get_value = wf_sat_get,
+ .release = wf_sat_release,
+ .owner = THIS_MODULE,
+};
+
+static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
+{
+ struct wf_sat *sat;
+ struct wf_sat_sensor *sens;
+ u32 *reg;
+ char *loc, *type;
+ u8 addr, chip, core;
+ struct device_node *child;
+ int shift, cpu, index;
+ char *name;
+ int vsens[2], isens[2];
+
+ reg = (u32 *) get_property(dev, "reg", NULL);
+ if (reg == NULL)
+ return;
+ addr = *reg;
+ DBG(KERN_DEBUG "wf_sat: creating sat at address %x\n", addr);
+
+ sat = kzalloc(sizeof(struct wf_sat), GFP_KERNEL);
+ if (sat == NULL)
+ return;
+ sat->nr = -1;
+ sat->node = of_node_get(dev);
+ atomic_set(&sat->refcnt, 0);
+ init_MUTEX(&sat->mutex);
+ sat->i2c.addr = (addr >> 1) & 0x7f;
+ sat->i2c.adapter = adapter;
+ sat->i2c.driver = &wf_sat_driver;
+ strncpy(sat->i2c.name, "smu-sat", I2C_NAME_SIZE-1);
+
+ if (i2c_attach_client(&sat->i2c)) {
+ printk(KERN_ERR "windfarm: failed to attach smu-sat to i2c\n");
+ goto fail;
+ }
+
+ vsens[0] = vsens[1] = -1;
+ isens[0] = isens[1] = -1;
+ child = NULL;
+ while ((child = of_get_next_child(dev, child)) != NULL) {
+ reg = (u32 *) get_property(child, "reg", NULL);
+ type = get_property(child, "device_type", NULL);
+ loc = get_property(child, "location", NULL);
+ if (reg == NULL || loc == NULL)
+ continue;
+
+ /* the cooked sensors are between 0x30 and 0x37 */
+ if (*reg < 0x30 || *reg > 0x37)
+ continue;
+ index = *reg - 0x30;
+
+ /* expect location to be CPU [AB][01] ... */
+ if (strncmp(loc, "CPU ", 4) != 0)
+ continue;
+ chip = loc[4] - 'A';
+ core = loc[5] - '0';
+ if (chip > 1 || core > 1) {
+ printk(KERN_ERR "wf_sat_create: don't understand "
+ "location %s for %s\n", loc, child->full_name);
+ continue;
+ }
+ cpu = 2 * chip + core;
+ if (sat->nr < 0)
+ sat->nr = chip;
+ else if (sat->nr != chip) {
+ printk(KERN_ERR "wf_sat_create: can't cope with "
+ "multiple CPU chips on one SAT (%s)\n", loc);
+ continue;
+ }
+
+ if (strcmp(type, "voltage-sensor") == 0) {
+ name = "cpu-voltage";
+ shift = 4;
+ vsens[core] = index;
+ } else if (strcmp(type, "current-sensor") == 0) {
+ name = "cpu-current";
+ shift = 8;
+ isens[core] = index;
+ } else if (strcmp(type, "temp-sensor") == 0) {
+ name = "cpu-temp";
+ shift = 10;
+ } else
+ continue; /* hmmm shouldn't happen */
+
+ /* the +16 is enough for "cpu-voltage-n" */
+ sens = kzalloc(sizeof(struct wf_sat_sensor) + 16, GFP_KERNEL);
+ if (sens == NULL) {
+ printk(KERN_ERR "wf_sat_create: couldn't create "
+ "%s sensor %d (no memory)\n", name, cpu);
+ continue;
+ }
+ sens->index = index;
+ sens->index2 = -1;
+ sens->shift = shift;
+ sens->sat = sat;
+ atomic_inc(&sat->refcnt);
+ sens->sens.ops = &wf_sat_ops;
+ sens->sens.name = (char *) (sens + 1);
+ snprintf(sens->sens.name, 16, "%s-%d", name, cpu);
+
+ if (wf_register_sensor(&sens->sens)) {
+ atomic_dec(&sat->refcnt);
+ kfree(sens);
+ }
+ }
+
+ /* make the power sensors */
+ for (core = 0; core < 2; ++core) {
+ if (vsens[core] < 0 || isens[core] < 0)
+ continue;
+ cpu = 2 * sat->nr + core;
+ sens = kzalloc(sizeof(struct wf_sat_sensor) + 16, GFP_KERNEL);
+ if (sens == NULL) {
+ printk(KERN_ERR "wf_sat_create: couldn't create power "
+ "sensor %d (no memory)\n", cpu);
+ continue;
+ }
+ sens->index = vsens[core];
+ sens->index2 = isens[core];
+ sens->shift = 0;
+ sens->sat = sat;
+ atomic_inc(&sat->refcnt);
+ sens->sens.ops = &wf_sat_ops;
+ sens->sens.name = (char *) (sens + 1);
+ snprintf(sens->sens.name, 16, "cpu-power-%d", cpu);
+
+ if (wf_register_sensor(&sens->sens)) {
+ atomic_dec(&sat->refcnt);
+ kfree(sens);
+ }
+ }
+
+ if (sat->nr >= 0)
+ sats[sat->nr] = sat;
+
+ return;
+
+ fail:
+ kfree(sat);
+}
+
+static int wf_sat_attach(struct i2c_adapter *adapter)
+{
+ struct device_node *busnode, *dev = NULL;
+ struct pmac_i2c_bus *bus;
+
+ bus = pmac_i2c_adapter_to_bus(adapter);
+ if (bus == NULL)
+ return -ENODEV;
+ busnode = pmac_i2c_get_bus_node(bus);
+
+ while ((dev = of_get_next_child(busnode, dev)) != NULL)
+ if (device_is_compatible(dev, "smu-sat"))
+ wf_sat_create(adapter, dev);
+ return 0;
+}
+
+static int wf_sat_detach(struct i2c_client *client)
+{
+ struct wf_sat *sat = i2c_to_sat(client);
+
+ /* XXX TODO */
+
+ sat->i2c.adapter = NULL;
+ return 0;
+}
+
+static int __init sat_sensors_init(void)
+{
+ int err;
+
+ err = i2c_add_driver(&wf_sat_driver);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static void __exit sat_sensors_exit(void)
+{
+ i2c_del_driver(&wf_sat_driver);
+}
+
+module_init(sat_sensors_init);
+/*module_exit(sat_sensors_exit); Uncomment when cleanup is implemented */
+
+MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
+MODULE_DESCRIPTION("SMU satellite sensors for PowerMac thermal control");
+MODULE_LICENSE("GPL");
diff --git a/drivers/macintosh/windfarm_smu_sensors.c b/drivers/macintosh/windfarm_smu_sensors.c
index 1a00d9c..bed25dc 100644
--- a/drivers/macintosh/windfarm_smu_sensors.c
+++ b/drivers/macintosh/windfarm_smu_sensors.c
@@ -220,14 +220,29 @@
!strcmp(l, "CPU T-Diode")) {
ads->sens.ops = &smu_cputemp_ops;
ads->sens.name = "cpu-temp";
+ if (cpudiode == NULL) {
+ DBG("wf: cpudiode partition (%02x) not found\n",
+ SMU_SDB_CPUDIODE_ID);
+ goto fail;
+ }
} else if (!strcmp(c, "current-sensor") &&
!strcmp(l, "CPU Current")) {
ads->sens.ops = &smu_cpuamp_ops;
ads->sens.name = "cpu-current";
+ if (cpuvcp == NULL) {
+ DBG("wf: cpuvcp partition (%02x) not found\n",
+ SMU_SDB_CPUVCP_ID);
+ goto fail;
+ }
} else if (!strcmp(c, "voltage-sensor") &&
!strcmp(l, "CPU Voltage")) {
ads->sens.ops = &smu_cpuvolt_ops;
ads->sens.name = "cpu-voltage";
+ if (cpuvcp == NULL) {
+ DBG("wf: cpuvcp partition (%02x) not found\n",
+ SMU_SDB_CPUVCP_ID);
+ goto fail;
+ }
} else if (!strcmp(c, "power-sensor") &&
!strcmp(l, "Slots Power")) {
ads->sens.ops = &smu_slotspow_ops;
@@ -365,29 +380,22 @@
return NULL;
}
-static int smu_fetch_param_partitions(void)
+static void smu_fetch_param_partitions(void)
{
struct smu_sdbp_header *hdr;
/* Get CPU voltage/current/power calibration data */
hdr = smu_get_sdb_partition(SMU_SDB_CPUVCP_ID, NULL);
- if (hdr == NULL) {
- DBG("wf: cpuvcp partition (%02x) not found\n",
- SMU_SDB_CPUVCP_ID);
- return -ENODEV;
+ if (hdr != NULL) {
+ cpuvcp = (struct smu_sdbp_cpuvcp *)&hdr[1];
+ /* Keep version around */
+ cpuvcp_version = hdr->version;
}
- cpuvcp = (struct smu_sdbp_cpuvcp *)&hdr[1];
- /* Keep version around */
- cpuvcp_version = hdr->version;
/* Get CPU diode calibration data */
hdr = smu_get_sdb_partition(SMU_SDB_CPUDIODE_ID, NULL);
- if (hdr == NULL) {
- DBG("wf: cpudiode partition (%02x) not found\n",
- SMU_SDB_CPUDIODE_ID);
- return -ENODEV;
- }
- cpudiode = (struct smu_sdbp_cpudiode *)&hdr[1];
+ if (hdr != NULL)
+ cpudiode = (struct smu_sdbp_cpudiode *)&hdr[1];
/* Get slots power calibration data if any */
hdr = smu_get_sdb_partition(SMU_SDB_SLOTSPOW_ID, NULL);
@@ -398,23 +406,18 @@
hdr = smu_get_sdb_partition(SMU_SDB_DEBUG_SWITCHES_ID, NULL);
if (hdr != NULL)
debugswitches = (u8 *)&hdr[1];
-
- return 0;
}
static int __init smu_sensors_init(void)
{
struct device_node *smu, *sensors, *s;
struct smu_ad_sensor *volt_sensor = NULL, *curr_sensor = NULL;
- int rc;
if (!smu_present())
return -ENODEV;
/* Get parameters partitions */
- rc = smu_fetch_param_partitions();
- if (rc)
- return rc;
+ smu_fetch_param_partitions();
smu = of_find_node_by_type(NULL, "smu");
if (smu == NULL)
diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c
index 1235135..442e2be 100644
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -1359,16 +1359,11 @@
* Copy the parameters into kernel space.
*/
r = copy_params(user, ¶m);
- if (r) {
- current->flags &= ~PF_MEMALLOC;
- return r;
- }
- /*
- * FIXME: eventually we will remove the PF_MEMALLOC flag
- * here. However the tools still do nasty things like
- * 'load' while a device is suspended.
- */
+ current->flags &= ~PF_MEMALLOC;
+
+ if (r)
+ return r;
r = validate_params(cmd, param);
if (r)
@@ -1386,7 +1381,6 @@
out:
free_params(param);
- current->flags &= ~PF_MEMALLOC;
return r;
}
diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c
index efe4adf..d73779a 100644
--- a/drivers/md/dm-log.c
+++ b/drivers/md/dm-log.c
@@ -112,7 +112,7 @@
/*
* The on-disk version of the metadata.
*/
-#define MIRROR_DISK_VERSION 1
+#define MIRROR_DISK_VERSION 2
#define LOG_OFFSET 2
struct log_header {
@@ -157,7 +157,6 @@
struct log_header *disk_header;
struct io_region bits_location;
- uint32_t *disk_bits;
};
/*
@@ -166,20 +165,20 @@
*/
static inline int log_test_bit(uint32_t *bs, unsigned bit)
{
- return test_bit(bit, (unsigned long *) bs) ? 1 : 0;
+ return ext2_test_bit(bit, (unsigned long *) bs) ? 1 : 0;
}
static inline void log_set_bit(struct log_c *l,
uint32_t *bs, unsigned bit)
{
- set_bit(bit, (unsigned long *) bs);
+ ext2_set_bit(bit, (unsigned long *) bs);
l->touched = 1;
}
static inline void log_clear_bit(struct log_c *l,
uint32_t *bs, unsigned bit)
{
- clear_bit(bit, (unsigned long *) bs);
+ ext2_clear_bit(bit, (unsigned long *) bs);
l->touched = 1;
}
@@ -219,6 +218,11 @@
log->header.nr_regions = 0;
}
+#ifdef __LITTLE_ENDIAN
+ if (log->header.version == 1)
+ log->header.version = 2;
+#endif
+
if (log->header.version != MIRROR_DISK_VERSION) {
DMWARN("incompatible disk log version");
return -EINVAL;
@@ -239,45 +243,24 @@
/*----------------------------------------------------------------
* Bits IO
*--------------------------------------------------------------*/
-static inline void bits_to_core(uint32_t *core, uint32_t *disk, unsigned count)
-{
- unsigned i;
-
- for (i = 0; i < count; i++)
- core[i] = le32_to_cpu(disk[i]);
-}
-
-static inline void bits_to_disk(uint32_t *core, uint32_t *disk, unsigned count)
-{
- unsigned i;
-
- /* copy across the clean/dirty bitset */
- for (i = 0; i < count; i++)
- disk[i] = cpu_to_le32(core[i]);
-}
-
static int read_bits(struct log_c *log)
{
int r;
unsigned long ebits;
r = dm_io_sync_vm(1, &log->bits_location, READ,
- log->disk_bits, &ebits);
+ log->clean_bits, &ebits);
if (r)
return r;
- bits_to_core(log->clean_bits, log->disk_bits,
- log->bitset_uint32_count);
return 0;
}
static int write_bits(struct log_c *log)
{
unsigned long ebits;
- bits_to_disk(log->clean_bits, log->disk_bits,
- log->bitset_uint32_count);
return dm_io_sync_vm(1, &log->bits_location, WRITE,
- log->disk_bits, &ebits);
+ log->clean_bits, &ebits);
}
/*----------------------------------------------------------------
@@ -433,11 +416,6 @@
size = dm_round_up(lc->bitset_uint32_count * sizeof(uint32_t),
1 << SECTOR_SHIFT);
lc->bits_location.count = size >> SECTOR_SHIFT;
- lc->disk_bits = vmalloc(size);
- if (!lc->disk_bits) {
- vfree(lc->disk_header);
- goto bad;
- }
return 0;
bad:
@@ -451,7 +429,6 @@
struct log_c *lc = (struct log_c *) log->context;
dm_put_device(lc->ti, lc->log_dev);
vfree(lc->disk_header);
- vfree(lc->disk_bits);
core_dtr(log);
}
@@ -568,7 +545,8 @@
return 0;
do {
- *region = find_next_zero_bit((unsigned long *) lc->sync_bits,
+ *region = ext2_find_next_zero_bit(
+ (unsigned long *) lc->sync_bits,
lc->region_count,
lc->sync_search);
lc->sync_search = *region + 1;
diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index 87727d8..f3759dd7 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -373,16 +373,11 @@
static void read_snapshot_metadata(struct dm_snapshot *s)
{
- if (s->have_metadata)
- return;
-
if (s->store.read_metadata(&s->store)) {
down_write(&s->lock);
s->valid = 0;
up_write(&s->lock);
}
-
- s->have_metadata = 1;
}
/*
@@ -471,7 +466,7 @@
s->chunk_shift = ffs(chunk_size) - 1;
s->valid = 1;
- s->have_metadata = 0;
+ s->active = 0;
s->last_percent = 0;
init_rwsem(&s->lock);
s->table = ti->table;
@@ -506,7 +501,11 @@
goto bad5;
}
+ /* Metadata must only be loaded into one table at once */
+ read_snapshot_metadata(s);
+
/* Add snapshot to the list of snapshots for this origin */
+ /* Exceptions aren't triggered till snapshot_resume() is called */
if (register_snapshot(s)) {
r = -EINVAL;
ti->error = "Cannot register snapshot origin";
@@ -793,6 +792,9 @@
if (!s->valid)
return -EIO;
+ if (unlikely(bio_barrier(bio)))
+ return -EOPNOTSUPP;
+
/*
* Write to snapshot - higher level takes care of RW/RO
* flags so we should only get this if we are
@@ -862,7 +864,9 @@
{
struct dm_snapshot *s = (struct dm_snapshot *) ti->private;
- read_snapshot_metadata(s);
+ down_write(&s->lock);
+ s->active = 1;
+ up_write(&s->lock);
}
static int snapshot_status(struct dm_target *ti, status_type_t type,
@@ -932,8 +936,8 @@
/* Do all the snapshots on this origin */
list_for_each_entry (snap, snapshots, list) {
- /* Only deal with valid snapshots */
- if (!snap->valid)
+ /* Only deal with valid and active snapshots */
+ if (!snap->valid || !snap->active)
continue;
/* Nothing to do if writing beyond end of snapshot */
@@ -1057,6 +1061,9 @@
struct dm_dev *dev = (struct dm_dev *) ti->private;
bio->bi_bdev = dev->bdev;
+ if (unlikely(bio_barrier(bio)))
+ return -EOPNOTSUPP;
+
/* Only tell snapshots if this is a write */
return (bio_rw(bio) == WRITE) ? do_origin(dev, bio) : 1;
}
@@ -1104,7 +1111,7 @@
static struct target_type origin_target = {
.name = "snapshot-origin",
- .version = {1, 0, 1},
+ .version = {1, 1, 0},
.module = THIS_MODULE,
.ctr = origin_ctr,
.dtr = origin_dtr,
@@ -1115,7 +1122,7 @@
static struct target_type snapshot_target = {
.name = "snapshot",
- .version = {1, 0, 1},
+ .version = {1, 1, 0},
.module = THIS_MODULE,
.ctr = snapshot_ctr,
.dtr = snapshot_dtr,
diff --git a/drivers/md/dm-snap.h b/drivers/md/dm-snap.h
index 375aa24..fdec1e2 100644
--- a/drivers/md/dm-snap.h
+++ b/drivers/md/dm-snap.h
@@ -99,7 +99,9 @@
/* You can't use a snapshot if this is 0 (e.g. if full) */
int valid;
- int have_metadata;
+
+ /* Origin writes don't trigger exceptions until this is set */
+ int active;
/* Used for display of table */
char type;
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index a6f2dc6..9b1e2f5 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -508,7 +508,7 @@
if (q->merge_bvec_fn)
rs->max_sectors =
min_not_zero(rs->max_sectors,
- (unsigned short)(PAGE_SIZE >> 9));
+ (unsigned int) (PAGE_SIZE >> 9));
rs->max_phys_segments =
min_not_zero(rs->max_phys_segments,
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 8c16359..e9adeb9 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -31,6 +31,7 @@
int error;
struct bio *bio;
atomic_t io_count;
+ unsigned long start_time;
};
/*
@@ -244,6 +245,36 @@
mempool_free(tio, md->tio_pool);
}
+static void start_io_acct(struct dm_io *io)
+{
+ struct mapped_device *md = io->md;
+
+ io->start_time = jiffies;
+
+ preempt_disable();
+ disk_round_stats(dm_disk(md));
+ preempt_enable();
+ dm_disk(md)->in_flight = atomic_inc_return(&md->pending);
+}
+
+static int end_io_acct(struct dm_io *io)
+{
+ struct mapped_device *md = io->md;
+ struct bio *bio = io->bio;
+ unsigned long duration = jiffies - io->start_time;
+ int pending;
+ int rw = bio_data_dir(bio);
+
+ preempt_disable();
+ disk_round_stats(dm_disk(md));
+ preempt_enable();
+ dm_disk(md)->in_flight = pending = atomic_dec_return(&md->pending);
+
+ disk_stat_add(dm_disk(md), ticks[rw], duration);
+
+ return !pending;
+}
+
/*
* Add the bio to the list of deferred io.
*/
@@ -299,7 +330,7 @@
io->error = error;
if (atomic_dec_and_test(&io->io_count)) {
- if (atomic_dec_and_test(&io->md->pending))
+ if (end_io_acct(io))
/* nudge anyone waiting on suspend queue */
wake_up(&io->md->wait);
@@ -554,7 +585,7 @@
ci.sector_count = bio_sectors(bio);
ci.idx = bio->bi_idx;
- atomic_inc(&md->pending);
+ start_io_acct(ci.io);
while (ci.sector_count)
__clone_and_map(&ci);
@@ -573,10 +604,14 @@
static int dm_request(request_queue_t *q, struct bio *bio)
{
int r;
+ int rw = bio_data_dir(bio);
struct mapped_device *md = q->queuedata;
down_read(&md->io_lock);
+ disk_stat_inc(dm_disk(md), ios[rw]);
+ disk_stat_add(dm_disk(md), sectors[rw], bio_sectors(bio));
+
/*
* If we're suspended we have to queue
* this io for later.
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 7145cd1..d05e312 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1024,7 +1024,7 @@
rdev-> sb_size = (rdev->sb_size | bmask)+1;
if (refdev == 0)
- return 1;
+ ret = 1;
else {
__u64 ev1, ev2;
struct mdp_superblock_1 *refsb =
@@ -1044,7 +1044,9 @@
ev2 = le64_to_cpu(refsb->events);
if (ev1 > ev2)
- return 1;
+ ret = 1;
+ else
+ ret = 0;
}
if (minor_version)
rdev->size = ((rdev->bdev->bd_inode->i_size>>9) - le64_to_cpu(sb->data_offset)) / 2;
@@ -1058,7 +1060,7 @@
if (le32_to_cpu(sb->size) > rdev->size*2)
return -EINVAL;
- return 0;
+ return ret;
}
static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
@@ -1081,7 +1083,7 @@
mddev->size = le64_to_cpu(sb->size)/2;
mddev->events = le64_to_cpu(sb->events);
mddev->bitmap_offset = 0;
- mddev->default_bitmap_offset = 1024;
+ mddev->default_bitmap_offset = 1024 >> 9;
mddev->recovery_cp = le64_to_cpu(sb->resync_offset);
memcpy(mddev->uuid, sb->set_uuid, 16);
@@ -1161,6 +1163,9 @@
sb->cnt_corrected_read = atomic_read(&rdev->corrected_errors);
+ sb->raid_disks = cpu_to_le32(mddev->raid_disks);
+ sb->size = cpu_to_le64(mddev->size<<1);
+
if (mddev->bitmap && mddev->bitmap_file == NULL) {
sb->bitmap_offset = cpu_to_le32((__u32)mddev->bitmap_offset);
sb->feature_map = cpu_to_le32(MD_FEATURE_BITMAP_OFFSET);
@@ -2686,14 +2691,6 @@
set_disk_ro(disk, 1);
}
- bitmap_destroy(mddev);
- if (mddev->bitmap_file) {
- atomic_set(&mddev->bitmap_file->f_dentry->d_inode->i_writecount, 1);
- fput(mddev->bitmap_file);
- mddev->bitmap_file = NULL;
- }
- mddev->bitmap_offset = 0;
-
/*
* Free resources if final stop
*/
@@ -2703,6 +2700,14 @@
struct gendisk *disk;
printk(KERN_INFO "md: %s stopped.\n", mdname(mddev));
+ bitmap_destroy(mddev);
+ if (mddev->bitmap_file) {
+ atomic_set(&mddev->bitmap_file->f_dentry->d_inode->i_writecount, 1);
+ fput(mddev->bitmap_file);
+ mddev->bitmap_file = NULL;
+ }
+ mddev->bitmap_offset = 0;
+
ITERATE_RDEV(mddev,rdev,tmp)
if (rdev->raid_disk >= 0) {
char nm[20];
@@ -2939,6 +2944,8 @@
info.ctime = mddev->ctime;
info.level = mddev->level;
info.size = mddev->size;
+ if (info.size != mddev->size) /* overflow */
+ info.size = -1;
info.nr_disks = nr;
info.raid_disks = mddev->raid_disks;
info.md_minor = mddev->md_minor;
@@ -3465,7 +3472,7 @@
bdev = bdget_disk(mddev->gendisk, 0);
if (bdev) {
mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode, mddev->array_size << 10);
+ i_size_write(bdev->bd_inode, (loff_t)mddev->array_size << 10);
mutex_unlock(&bdev->bd_inode->i_mutex);
bdput(bdev);
}
@@ -3485,17 +3492,6 @@
if (mddev->sync_thread)
return -EBUSY;
rv = mddev->pers->reshape(mddev, raid_disks);
- if (!rv) {
- struct block_device *bdev;
-
- bdev = bdget_disk(mddev->gendisk, 0);
- if (bdev) {
- mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode, mddev->array_size << 10);
- mutex_unlock(&bdev->bd_inode->i_mutex);
- bdput(bdev);
- }
- }
return rv;
}
@@ -3531,7 +3527,7 @@
)
return -EINVAL;
/* Check there is only one change */
- if (mddev->size != info->size) cnt++;
+ if (info->size >= 0 && mddev->size != info->size) cnt++;
if (mddev->raid_disks != info->raid_disks) cnt++;
if (mddev->layout != info->layout) cnt++;
if ((state ^ info->state) & (1<<MD_SB_BITMAP_PRESENT)) cnt++;
@@ -3548,7 +3544,7 @@
else
return mddev->pers->reconfig(mddev, info->layout, -1);
}
- if (mddev->size != info->size)
+ if (info->size >= 0 && mddev->size != info->size)
rv = update_size(mddev, info->size);
if (mddev->raid_disks != info->raid_disks)
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index d03f99c..678f4db 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -372,7 +372,7 @@
kfree(conf);
mddev->private = NULL;
out:
- return 1;
+ return -ENOMEM;
}
static int raid0_stop (mddev_t *mddev)
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 9130d05..ab90a6d 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -565,6 +565,8 @@
if (disk >= 0 && (rdev=rcu_dereference(conf->mirrors[disk].rdev))!= NULL)
atomic_inc(&conf->mirrors[disk].rdev->nr_pending);
+ else
+ disk = -1;
rcu_read_unlock();
return disk;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 25976bf..2dba305 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -350,7 +350,8 @@
while (drop_one_stripe(conf))
;
- kmem_cache_destroy(conf->slab_cache);
+ if (conf->slab_cache)
+ kmem_cache_destroy(conf->slab_cache);
conf->slab_cache = NULL;
}
diff --git a/drivers/md/raid6main.c b/drivers/md/raid6main.c
index f618a53..cd477ebf 100644
--- a/drivers/md/raid6main.c
+++ b/drivers/md/raid6main.c
@@ -115,7 +115,7 @@
list_add_tail(&sh->lru, &conf->inactive_list);
atomic_dec(&conf->active_stripes);
if (!conf->inactive_blocked ||
- atomic_read(&conf->active_stripes) < (NR_STRIPES*3/4))
+ atomic_read(&conf->active_stripes) < (conf->max_nr_stripes*3/4))
wake_up(&conf->wait_for_stripe);
}
}
@@ -273,7 +273,8 @@
conf->inactive_blocked = 1;
wait_event_lock_irq(conf->wait_for_stripe,
!list_empty(&conf->inactive_list) &&
- (atomic_read(&conf->active_stripes) < (NR_STRIPES *3/4)
+ (atomic_read(&conf->active_stripes)
+ < (conf->max_nr_stripes *3/4)
|| !conf->inactive_blocked),
conf->device_lock,
unplug_slaves(conf->mddev);
@@ -302,9 +303,31 @@
return sh;
}
-static int grow_stripes(raid6_conf_t *conf, int num)
+static int grow_one_stripe(raid6_conf_t *conf)
{
struct stripe_head *sh;
+ sh = kmem_cache_alloc(conf->slab_cache, GFP_KERNEL);
+ if (!sh)
+ return 0;
+ memset(sh, 0, sizeof(*sh) + (conf->raid_disks-1)*sizeof(struct r5dev));
+ sh->raid_conf = conf;
+ spin_lock_init(&sh->lock);
+
+ if (grow_buffers(sh, conf->raid_disks)) {
+ shrink_buffers(sh, conf->raid_disks);
+ kmem_cache_free(conf->slab_cache, sh);
+ return 0;
+ }
+ /* we just created an active stripe so... */
+ atomic_set(&sh->count, 1);
+ atomic_inc(&conf->active_stripes);
+ INIT_LIST_HEAD(&sh->lru);
+ release_stripe(sh);
+ return 1;
+}
+
+static int grow_stripes(raid6_conf_t *conf, int num)
+{
kmem_cache_t *sc;
int devs = conf->raid_disks;
@@ -316,45 +339,35 @@
if (!sc)
return 1;
conf->slab_cache = sc;
- while (num--) {
- sh = kmem_cache_alloc(sc, GFP_KERNEL);
- if (!sh)
+ while (num--)
+ if (!grow_one_stripe(conf))
return 1;
- memset(sh, 0, sizeof(*sh) + (devs-1)*sizeof(struct r5dev));
- sh->raid_conf = conf;
- spin_lock_init(&sh->lock);
-
- if (grow_buffers(sh, conf->raid_disks)) {
- shrink_buffers(sh, conf->raid_disks);
- kmem_cache_free(sc, sh);
- return 1;
- }
- /* we just created an active stripe so... */
- atomic_set(&sh->count, 1);
- atomic_inc(&conf->active_stripes);
- INIT_LIST_HEAD(&sh->lru);
- release_stripe(sh);
- }
return 0;
}
+static int drop_one_stripe(raid6_conf_t *conf)
+{
+ struct stripe_head *sh;
+ spin_lock_irq(&conf->device_lock);
+ sh = get_free_stripe(conf);
+ spin_unlock_irq(&conf->device_lock);
+ if (!sh)
+ return 0;
+ if (atomic_read(&sh->count))
+ BUG();
+ shrink_buffers(sh, conf->raid_disks);
+ kmem_cache_free(conf->slab_cache, sh);
+ atomic_dec(&conf->active_stripes);
+ return 1;
+}
+
static void shrink_stripes(raid6_conf_t *conf)
{
- struct stripe_head *sh;
+ while (drop_one_stripe(conf))
+ ;
- while (1) {
- spin_lock_irq(&conf->device_lock);
- sh = get_free_stripe(conf);
- spin_unlock_irq(&conf->device_lock);
- if (!sh)
- break;
- if (atomic_read(&sh->count))
- BUG();
- shrink_buffers(sh, conf->raid_disks);
- kmem_cache_free(conf->slab_cache, sh);
- atomic_dec(&conf->active_stripes);
- }
- kmem_cache_destroy(conf->slab_cache);
+ if (conf->slab_cache)
+ kmem_cache_destroy(conf->slab_cache);
conf->slab_cache = NULL;
}
@@ -1912,6 +1925,74 @@
PRINTK("--- raid6d inactive\n");
}
+static ssize_t
+raid6_show_stripe_cache_size(mddev_t *mddev, char *page)
+{
+ raid6_conf_t *conf = mddev_to_conf(mddev);
+ if (conf)
+ return sprintf(page, "%d\n", conf->max_nr_stripes);
+ else
+ return 0;
+}
+
+static ssize_t
+raid6_store_stripe_cache_size(mddev_t *mddev, const char *page, size_t len)
+{
+ raid6_conf_t *conf = mddev_to_conf(mddev);
+ char *end;
+ int new;
+ if (len >= PAGE_SIZE)
+ return -EINVAL;
+ if (!conf)
+ return -ENODEV;
+
+ new = simple_strtoul(page, &end, 10);
+ if (!*page || (*end && *end != '\n') )
+ return -EINVAL;
+ if (new <= 16 || new > 32768)
+ return -EINVAL;
+ while (new < conf->max_nr_stripes) {
+ if (drop_one_stripe(conf))
+ conf->max_nr_stripes--;
+ else
+ break;
+ }
+ while (new > conf->max_nr_stripes) {
+ if (grow_one_stripe(conf))
+ conf->max_nr_stripes++;
+ else break;
+ }
+ return len;
+}
+
+static struct md_sysfs_entry
+raid6_stripecache_size = __ATTR(stripe_cache_size, S_IRUGO | S_IWUSR,
+ raid6_show_stripe_cache_size,
+ raid6_store_stripe_cache_size);
+
+static ssize_t
+stripe_cache_active_show(mddev_t *mddev, char *page)
+{
+ raid6_conf_t *conf = mddev_to_conf(mddev);
+ if (conf)
+ return sprintf(page, "%d\n", atomic_read(&conf->active_stripes));
+ else
+ return 0;
+}
+
+static struct md_sysfs_entry
+raid6_stripecache_active = __ATTR_RO(stripe_cache_active);
+
+static struct attribute *raid6_attrs[] = {
+ &raid6_stripecache_size.attr,
+ &raid6_stripecache_active.attr,
+ NULL,
+};
+static struct attribute_group raid6_attrs_group = {
+ .name = NULL,
+ .attrs = raid6_attrs,
+};
+
static int run(mddev_t *mddev)
{
raid6_conf_t *conf;
@@ -2095,6 +2176,7 @@
shrink_stripes(conf);
kfree(conf->stripe_hashtbl);
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
+ sysfs_remove_group(&mddev->kobj, &raid6_attrs_group);
kfree(conf);
mddev->private = NULL;
return 0;
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 2583a86..2963605 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -4,7 +4,7 @@
select DVB_STV0299
select DVB_MT352
select DVB_MT312
- select DVB_NXT2002
+ select DVB_NXT200X
select DVB_STV0297
select DVB_BCM3510
select DVB_LGDT330X
diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h
index 344a3c8..7d7e161 100644
--- a/drivers/media/dvb/b2c2/flexcop-common.h
+++ b/drivers/media/dvb/b2c2/flexcop-common.h
@@ -116,11 +116,9 @@
int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
-int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx);
int flexcop_dma_xfer_control(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index, int onoff);
int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles);
-int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets);
/* from flexcop-eeprom.c */
/* the PCI part uses this call to get the MAC address, the USB part has its own */
diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c
index cf4ed1d..6f592bc 100644
--- a/drivers/media/dvb/b2c2/flexcop-dma.c
+++ b/drivers/media/dvb/b2c2/flexcop-dma.c
@@ -169,38 +169,3 @@
}
EXPORT_SYMBOL(flexcop_dma_config_timer);
-/* packet IRQ does not exist in FCII or FCIIb - according to data book and tests */
-int flexcop_dma_control_packet_irq(struct flexcop_device *fc,
- flexcop_dma_index_t no,
- int onoff)
-{
- flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
-
- deb_rdump("reg: %03x: %x\n",ctrl_208,v.raw);
- if (no & FC_DMA_1)
- v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff;
-
- if (no & FC_DMA_2)
- v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff;
-
- fc->write_ibi_reg(fc,ctrl_208,v);
- deb_rdump("reg: %03x: %x\n",ctrl_208,v.raw);
-
- return 0;
-}
-EXPORT_SYMBOL(flexcop_dma_control_packet_irq);
-
-int flexcop_dma_config_packet_count(struct flexcop_device *fc,
- flexcop_dma_index_t dma_idx,
- u8 packets)
-{
- flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
- flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
-
- flexcop_dma_remap(fc,dma_idx,1);
-
- v.dma_0x4_remap.DMA_maxpackets = packets;
- fc->write_ibi_reg(fc,r,v);
- return 0;
-}
-EXPORT_SYMBOL(flexcop_dma_config_packet_count);
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 0b940e1..390cc3a 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -9,7 +9,7 @@
#include "stv0299.h"
#include "mt352.h"
-#include "nxt2002.h"
+#include "nxt200x.h"
#include "bcm3510.h"
#include "stv0297.h"
#include "mt312.h"
@@ -343,9 +343,10 @@
.clock_polarity_flip = 1,
};
-static struct nxt2002_config samsung_tbmv_config = {
+static struct nxt200x_config samsung_tbmv_config = {
.demod_address = 0x0a,
- .request_firmware = flexcop_fe_request_firmware,
+ .pll_address = 0xc2,
+ .pll_desc = &dvb_pll_samsung_tbmv,
};
static struct bcm3510_config air2pc_atsc_first_gen_config = {
@@ -505,7 +506,7 @@
info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
} else
/* try the air atsc 2nd generation (nxt2002) */
- if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
+ if ((fc->fe = nxt200x_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
fc->dev_type = FC_AIR_ATSC2;
info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
} else
diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c
index 62282d8..167583b 100644
--- a/drivers/media/dvb/b2c2/flexcop-misc.c
+++ b/drivers/media/dvb/b2c2/flexcop-misc.c
@@ -36,14 +36,14 @@
/* bus parts have to decide if hw pid filtering is used or not. */
}
-const char *flexcop_revision_names[] = {
+static const char *flexcop_revision_names[] = {
"Unkown chip",
"FlexCopII",
"FlexCopIIb",
"FlexCopIII",
};
-const char *flexcop_device_names[] = {
+static const char *flexcop_device_names[] = {
"Unkown device",
"Air2PC/AirStar 2 DVB-T",
"Air2PC/AirStar 2 ATSC 1st generation",
@@ -54,7 +54,7 @@
"Air2PC/AirStar 2 ATSC 3rd generation (HD5000)",
};
-const char *flexcop_bus_names[] = {
+static const char *flexcop_bus_names[] = {
"USB",
"PCI",
};
diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c
index 2f76eb3..9bc40bd 100644
--- a/drivers/media/dvb/b2c2/flexcop-pci.c
+++ b/drivers/media/dvb/b2c2/flexcop-pci.c
@@ -161,8 +161,10 @@
fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
- deb_irq("%u irq: %08x cur_addr: %08x: cur_pos: %08x, last_cur_pos: %08x ",
- jiffies_to_usecs(jiffies - fc_pci->last_irq),v.raw,cur_addr,cur_pos,fc_pci->last_dma1_cur_pos);
+ deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
+ jiffies_to_usecs(jiffies - fc_pci->last_irq),
+ v.raw, (unsigned long long)cur_addr, cur_pos,
+ fc_pci->last_dma1_cur_pos);
fc_pci->last_irq = jiffies;
/* buffer end was reached, restarted from the beginning
diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h
index 3153f95..491f9bd 100644
--- a/drivers/media/dvb/b2c2/flexcop-reg.h
+++ b/drivers/media/dvb/b2c2/flexcop-reg.h
@@ -16,8 +16,6 @@
FLEXCOP_III,
} flexcop_revision_t;
-extern const char *flexcop_revision_names[];
-
typedef enum {
FC_UNK = 0,
FC_AIR_DVB,
@@ -34,8 +32,6 @@
FC_PCI,
} flexcop_bus_t;
-extern const char *flexcop_device_names[];
-
/* FlexCop IBI Registers */
#if defined(__LITTLE_ENDIAN)
#include "flexcop_ibi_value_le.h"
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index a04bb61..34c3189 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -381,6 +381,23 @@
EXPORT_SYMBOL(bt878_device_control);
+
+struct cards card_list[] __devinitdata = {
+
+ { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
+ { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
+ { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
+ { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
+ { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
+ { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
+ { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
+ { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
+ { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
+ { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
+ { 0, -1, NULL }
+};
+
+
/***********************/
/* PCI device handling */
/***********************/
@@ -388,18 +405,41 @@
static int __devinit bt878_probe(struct pci_dev *dev,
const struct pci_device_id *pci_id)
{
- int result;
+ int result = 0, has_dvb = 0, i;
unsigned char lat;
struct bt878 *bt;
#if defined(__powerpc__)
unsigned int cmd;
#endif
+ unsigned int cardid;
+ unsigned short id;
+ struct cards *dvb_cards;
printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n",
bt878_num);
if (pci_enable_device(dev))
return -EIO;
+ pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &id);
+ cardid = id << 16;
+ pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &id);
+ cardid |= id;
+
+ for (i = 0, dvb_cards = card_list; i < ARRAY_SIZE(card_list); i++, dvb_cards++) {
+ if (cardid == dvb_cards->pci_id) {
+ printk("%s: card id=[0x%x],[ %s ] has DVB functions.\n",
+ __func__, cardid, dvb_cards->name);
+ has_dvb = 1;
+ }
+ }
+
+ if (!has_dvb) {
+ printk("%s: card id=[0x%x], Unknown card.\nExiting..\n", __func__, cardid);
+ result = -EINVAL;
+
+ goto fail0;
+ }
+
bt = &bt878[bt878_num];
bt->dev = dev;
bt->nr = bt878_num;
@@ -416,6 +456,8 @@
pci_read_config_byte(dev, PCI_CLASS_REVISION, &bt->revision);
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+
+
printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ",
bt878_num, bt->id, bt->revision, dev->bus->number,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
diff --git a/drivers/media/dvb/bt8xx/bt878.h b/drivers/media/dvb/bt8xx/bt878.h
index a73baf0..9faf937 100644
--- a/drivers/media/dvb/bt8xx/bt878.h
+++ b/drivers/media/dvb/bt8xx/bt878.h
@@ -88,6 +88,23 @@
#define BT878_RISC_SYNC_MASK (1 << 15)
+
+#define BTTV_BOARD_UNKNOWN 0x00
+#define BTTV_BOARD_PINNACLESAT 0x5e
+#define BTTV_BOARD_NEBULA_DIGITV 0x68
+#define BTTV_BOARD_PC_HDTV 0x70
+#define BTTV_BOARD_TWINHAN_DST 0x71
+#define BTTV_BOARD_AVDVBT_771 0x7b
+#define BTTV_BOARD_AVDVBT_761 0x7c
+#define BTTV_BOARD_DVICO_DVBT_LITE 0x80
+#define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87
+
+struct cards {
+ __u32 pci_id;
+ __u16 card_id;
+ char *name;
+};
+
extern int bt878_num;
struct bt878 {
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 90a69d3..d3df120 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -83,12 +83,18 @@
Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
config DVB_USB_CXUSB
- tristate "Medion MD95700 hybrid USB2.0 (Conexant) support"
+ tristate "Conexant USB2.0 hybrid reference design support"
depends on DVB_USB
select DVB_CX22702
+ select DVB_LGDT330X
+ select DVB_MT352
help
- Say Y here to support the Medion MD95700 hybrid USB2.0 device. Currently
- only the DVB-T part is supported.
+ Say Y here to support the Conexant USB2.0 hybrid reference design.
+ Currently, only DVB and ATSC modes are supported, analog mode
+ shall be added in the future. Devices that require this module:
+
+ Medion MD95700 hybrid USB2.0 device.
+ DViCO FusionHDTV (Bluebird) USB2.0 devices
config DVB_USB_DIGITV
tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index a7fb06f..f327fac 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -184,7 +184,7 @@
return 0;
}
-struct dvb_usb_rc_key dvico_mce_rc_keys[] = {
+static struct dvb_usb_rc_key dvico_mce_rc_keys[] = {
{ 0xfe, 0x02, KEY_TV },
{ 0xfe, 0x0e, KEY_MP3 },
{ 0xfe, 0x1a, KEY_DVD },
@@ -234,7 +234,7 @@
static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
{
- static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x38 };
+ static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 };
static u8 reset [] = { RESET, 0x80 };
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 };
@@ -255,7 +255,7 @@
static int cxusb_mt352_demod_init(struct dvb_frontend* fe)
{ /* used in both lgz201 and th7579 */
- static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x39 };
+ static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x29 };
static u8 reset [] = { RESET, 0x80 };
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
static u8 agc_cfg [] = { AGC_TARGET, 0x24, 0x20 };
@@ -273,7 +273,7 @@
return 0;
}
-struct cx22702_config cxusb_cx22702_config = {
+static struct cx22702_config cxusb_cx22702_config = {
.demod_address = 0x63,
.output_mode = CX22702_PARALLEL_OUTPUT,
@@ -282,13 +282,13 @@
.pll_set = dvb_usb_pll_set_i2c,
};
-struct lgdt330x_config cxusb_lgdt330x_config = {
+static struct lgdt330x_config cxusb_lgdt330x_config = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
.pll_set = dvb_usb_pll_set_i2c,
};
-struct mt352_config cxusb_dee1601_config = {
+static struct mt352_config cxusb_dee1601_config = {
.demod_address = 0x0f,
.demod_init = cxusb_dee1601_demod_init,
.pll_set = dvb_usb_pll_set,
diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c
index e6c55c9..caa1346 100644
--- a/drivers/media/dvb/dvb-usb/digitv.c
+++ b/drivers/media/dvb/dvb-usb/digitv.c
@@ -175,11 +175,13 @@
if ((ret = dvb_usb_device_init(intf,&digitv_properties,THIS_MODULE,&d)) == 0) {
u8 b[4] = { 0 };
- b[0] = 1;
- digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
+ if (d != NULL) { /* do that only when the firmware is loaded */
+ b[0] = 1;
+ digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
- b[0] = 0;
- digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+ b[0] = 0;
+ digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+ }
}
return ret;
}
@@ -194,7 +196,7 @@
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = CYPRESS_FX2,
- .firmware = "dvb-usb-digitv-01.fw",
+ .firmware = "dvb-usb-digitv-02.fw",
.size_of_priv = 0,
@@ -229,6 +231,7 @@
{ &digitv_table[0], NULL },
{ NULL },
},
+ { NULL },
}
};
diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c
index 130ea7f..12ebaf8 100644
--- a/drivers/media/dvb/dvb-usb/dtt200u.c
+++ b/drivers/media/dvb/dvb-usb/dtt200u.c
@@ -151,7 +151,7 @@
.cold_ids = { &dtt200u_usb_table[0], NULL },
.warm_ids = { &dtt200u_usb_table[1], NULL },
},
- { 0 },
+ { NULL },
}
};
@@ -192,7 +192,7 @@
.cold_ids = { &dtt200u_usb_table[2], NULL },
.warm_ids = { &dtt200u_usb_table[3], NULL },
},
- { 0 },
+ { NULL },
}
};
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
index 8535895..9222b0a 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
@@ -24,6 +24,9 @@
{ .id = CYPRESS_FX2, .name = "Cypress FX2", .cpu_cs_register = 0xe600 },
};
+static int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx,
+ int *pos);
+
/*
* load a firmware packet to the device
*/
@@ -112,7 +115,8 @@
return ret;
}
-int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, int *pos)
+static int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx,
+ int *pos)
{
u8 *b = (u8 *) &fw->data[*pos];
int data_offs = 4;
@@ -142,5 +146,3 @@
return *pos;
}
-EXPORT_SYMBOL(dvb_usb_get_hexline);
-
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index dd56839..5e5d21a 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -341,7 +341,6 @@
u8 data[255];
u8 chk;
};
-extern int dvb_usb_get_hexline(const struct firmware *, struct hexline *, int *);
extern int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type);
#endif
diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/dvb/dvb-usb/vp702x.c
index afa00fd..4a95eca 100644
--- a/drivers/media/dvb/dvb-usb/vp702x.c
+++ b/drivers/media/dvb/dvb-usb/vp702x.c
@@ -53,7 +53,8 @@
return ret;
}
-int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
+static int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
+ u16 index, u8 *b, int blen)
{
deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
debug_dump(b,blen,deb_xfer);
@@ -88,7 +89,8 @@
return ret;
}
-int vp702x_usb_inout_cmd(struct dvb_usb_device *d, u8 cmd, u8 *o, int olen, u8 *i, int ilen, int msec)
+static int vp702x_usb_inout_cmd(struct dvb_usb_device *d, u8 cmd, u8 *o,
+ int olen, u8 *i, int ilen, int msec)
{
u8 bout[olen+2];
u8 bin[ilen+1];
diff --git a/drivers/media/dvb/dvb-usb/vp702x.h b/drivers/media/dvb/dvb-usb/vp702x.h
index a808d48..c2f97f9 100644
--- a/drivers/media/dvb/dvb-usb/vp702x.h
+++ b/drivers/media/dvb/dvb-usb/vp702x.h
@@ -101,8 +101,6 @@
extern struct dvb_frontend * vp702x_fe_attach(struct dvb_usb_device *d);
extern int vp702x_usb_inout_op(struct dvb_usb_device *d, u8 *o, int olen, u8 *i, int ilen, int msec);
-extern int vp702x_usb_inout_cmd(struct dvb_usb_device *d, u8 cmd, u8 *o, int olen, u8 *i, int ilen, int msec);
extern int vp702x_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
-extern int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
#endif
diff --git a/drivers/media/dvb/dvb-usb/vp7045-fe.c b/drivers/media/dvb/dvb-usb/vp7045-fe.c
index 5242cca..9999336 100644
--- a/drivers/media/dvb/dvb-usb/vp7045-fe.c
+++ b/drivers/media/dvb/dvb-usb/vp7045-fe.c
@@ -23,10 +23,11 @@
struct vp7045_fe_state {
struct dvb_frontend fe;
+ struct dvb_frontend_ops ops;
+
struct dvb_usb_device *d;
};
-
static int vp7045_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
{
struct vp7045_fe_state *state = fe->demodulator_priv;
@@ -150,7 +151,8 @@
goto error;
s->d = d;
- s->fe.ops = &vp7045_fe_ops;
+ memcpy(&s->ops, &vp7045_fe_ops, sizeof(struct dvb_frontend_ops));
+ s->fe.ops = &s->ops;
s->fe.demodulator_priv = s;
goto success;
diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c
index 0282049..3835235 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.c
+++ b/drivers/media/dvb/dvb-usb/vp7045.c
@@ -247,7 +247,7 @@
.cold_ids = { &vp7045_usb_table[2], NULL },
.warm_ids = { &vp7045_usb_table[3], NULL },
},
- { 0 },
+ { NULL },
}
};
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index db3a8b4..76b6a2a 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -28,12 +28,6 @@
help
A DVB-S tuner module. Say Y when you want to support this frontend.
-config DVB_TDA80XX
- tristate "Philips TDA8044 or TDA8083 based"
- depends on DVB_CORE
- help
- A DVB-S tuner module. Say Y when you want to support this frontend.
-
config DVB_MT312
tristate "Zarlink MT312 based"
depends on DVB_CORE
@@ -139,12 +133,6 @@
comment "DVB-C (cable) frontends"
depends on DVB_CORE
-config DVB_ATMEL_AT76C651
- tristate "Atmel AT76C651 based"
- depends on DVB_CORE
- help
- A DVB-C tuner module. Say Y when you want to support this frontend.
-
config DVB_VES1820
tristate "VLSI VES1820 based"
depends on DVB_CORE
@@ -166,18 +154,6 @@
comment "ATSC (North American/Korean Terresterial DTV) frontends"
depends on DVB_CORE
-config DVB_NXT2002
- tristate "Nxt2002 based"
- depends on DVB_CORE
- select FW_LOADER
- help
- An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
-
- This driver needs external firmware. Please use the command
- "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" to
- download/extract it, and then copy it to /usr/lib/hotplug/firmware
- or /lib/firmware (depending on configuration of firmware hotplug).
-
config DVB_NXT200X
tristate "Nextwave NXT2002/NXT2004 based"
depends on DVB_CORE
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 615ec83..1af769c 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -8,7 +8,6 @@
obj-$(CONFIG_DVB_STV0299) += stv0299.o
obj-$(CONFIG_DVB_SP8870) += sp8870.o
obj-$(CONFIG_DVB_CX22700) += cx22700.o
-obj-$(CONFIG_DVB_ATMEL_AT76C651) += at76c651.o
obj-$(CONFIG_DVB_CX24110) += cx24110.o
obj-$(CONFIG_DVB_TDA8083) += tda8083.o
obj-$(CONFIG_DVB_L64781) += l64781.o
@@ -22,10 +21,8 @@
obj-$(CONFIG_DVB_NXT6000) += nxt6000.o
obj-$(CONFIG_DVB_MT352) += mt352.o
obj-$(CONFIG_DVB_CX22702) += cx22702.o
-obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o
obj-$(CONFIG_DVB_TDA10021) += tda10021.o
obj-$(CONFIG_DVB_STV0297) += stv0297.o
-obj-$(CONFIG_DVB_NXT2002) += nxt2002.o
obj-$(CONFIG_DVB_NXT200X) += nxt200x.o
obj-$(CONFIG_DVB_OR51211) += or51211.o
obj-$(CONFIG_DVB_OR51132) += or51132.o
diff --git a/drivers/media/dvb/frontends/at76c651.c b/drivers/media/dvb/frontends/at76c651.c
deleted file mode 100644
index 8e0f4b3..0000000
--- a/drivers/media/dvb/frontends/at76c651.c
+++ /dev/null
@@ -1,450 +0,0 @@
-/*
- * at76c651.c
- *
- * Atmel DVB-C Frontend Driver (at76c651/tua6010xs)
- *
- * Copyright (C) 2001 fnbrd <fnbrd@gmx.de>
- * & 2002-2004 Andreas Oberritter <obi@linuxtv.org>
- * & 2003 Wolfram Joost <dbox2@frokaschwei.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * AT76C651
- * http://www.nalanda.nitc.ac.in/industry/datasheets/atmel/acrobat/doc1293.pdf
- * http://www.atmel.com/atmel/acrobat/doc1320.pdf
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/bitops.h>
-#include "dvb_frontend.h"
-#include "at76c651.h"
-
-
-struct at76c651_state {
-
- struct i2c_adapter* i2c;
-
- struct dvb_frontend_ops ops;
-
- const struct at76c651_config* config;
-
- struct dvb_frontend frontend;
-
- /* revision of the chip */
- u8 revision;
-
- /* last QAM value set */
- u8 qam;
-};
-
-static int debug;
-#define dprintk(args...) \
- do { \
- if (debug) printk(KERN_DEBUG "at76c651: " args); \
- } while (0)
-
-
-#if ! defined(__powerpc__)
-static __inline__ int __ilog2(unsigned long x)
-{
- int i;
-
- if (x == 0)
- return -1;
-
- for (i = 0; x != 0; i++)
- x >>= 1;
-
- return i - 1;
-}
-#endif
-
-static int at76c651_writereg(struct at76c651_state* state, u8 reg, u8 data)
-{
- int ret;
- u8 buf[] = { reg, data };
- struct i2c_msg msg =
- { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
-
- ret = i2c_transfer(state->i2c, &msg, 1);
-
- if (ret != 1)
- dprintk("%s: writereg error "
- "(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
- __FUNCTION__, reg, data, ret);
-
- msleep(10);
-
- return (ret != 1) ? -EREMOTEIO : 0;
-}
-
-static u8 at76c651_readreg(struct at76c651_state* state, u8 reg)
-{
- int ret;
- u8 val;
- struct i2c_msg msg[] = {
- { .addr = state->config->demod_address, .flags = 0, .buf = ®, .len = 1 },
- { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = &val, .len = 1 }
- };
-
- ret = i2c_transfer(state->i2c, msg, 2);
-
- if (ret != 2)
- dprintk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret);
-
- return val;
-}
-
-static int at76c651_reset(struct at76c651_state* state)
-{
- return at76c651_writereg(state, 0x07, 0x01);
-}
-
-static void at76c651_disable_interrupts(struct at76c651_state* state)
-{
- at76c651_writereg(state, 0x0b, 0x00);
-}
-
-static int at76c651_set_auto_config(struct at76c651_state *state)
-{
- /*
- * Autoconfig
- */
-
- at76c651_writereg(state, 0x06, 0x01);
-
- /*
- * Performance optimizations, should be done after autoconfig
- */
-
- at76c651_writereg(state, 0x10, 0x06);
- at76c651_writereg(state, 0x11, ((state->qam == 5) || (state->qam == 7)) ? 0x12 : 0x10);
- at76c651_writereg(state, 0x15, 0x28);
- at76c651_writereg(state, 0x20, 0x09);
- at76c651_writereg(state, 0x24, ((state->qam == 5) || (state->qam == 7)) ? 0xC0 : 0x90);
- at76c651_writereg(state, 0x30, 0x90);
- if (state->qam == 5)
- at76c651_writereg(state, 0x35, 0x2A);
-
- /*
- * Initialize A/D-converter
- */
-
- if (state->revision == 0x11) {
- at76c651_writereg(state, 0x2E, 0x38);
- at76c651_writereg(state, 0x2F, 0x13);
- }
-
- at76c651_disable_interrupts(state);
-
- /*
- * Restart operation
- */
-
- at76c651_reset(state);
-
- return 0;
-}
-
-static void at76c651_set_bbfreq(struct at76c651_state* state)
-{
- at76c651_writereg(state, 0x04, 0x3f);
- at76c651_writereg(state, 0x05, 0xee);
-}
-
-static int at76c651_set_symbol_rate(struct at76c651_state* state, u32 symbol_rate)
-{
- u8 exponent;
- u32 mantissa;
-
- if (symbol_rate > 9360000)
- return -EINVAL;
-
- /*
- * FREF = 57800 kHz
- * exponent = 10 + floor (log2(symbol_rate / FREF))
- * mantissa = (symbol_rate / FREF) * (1 << (30 - exponent))
- */
-
- exponent = __ilog2((symbol_rate << 4) / 903125);
- mantissa = ((symbol_rate / 3125) * (1 << (24 - exponent))) / 289;
-
- at76c651_writereg(state, 0x00, mantissa >> 13);
- at76c651_writereg(state, 0x01, mantissa >> 5);
- at76c651_writereg(state, 0x02, (mantissa << 3) | exponent);
-
- return 0;
-}
-
-static int at76c651_set_qam(struct at76c651_state *state, fe_modulation_t qam)
-{
- switch (qam) {
- case QPSK:
- state->qam = 0x02;
- break;
- case QAM_16:
- state->qam = 0x04;
- break;
- case QAM_32:
- state->qam = 0x05;
- break;
- case QAM_64:
- state->qam = 0x06;
- break;
- case QAM_128:
- state->qam = 0x07;
- break;
- case QAM_256:
- state->qam = 0x08;
- break;
-#if 0
- case QAM_512:
- state->qam = 0x09;
- break;
- case QAM_1024:
- state->qam = 0x0A;
- break;
-#endif
- default:
- return -EINVAL;
-
- }
-
- return at76c651_writereg(state, 0x03, state->qam);
-}
-
-static int at76c651_set_inversion(struct at76c651_state* state, fe_spectral_inversion_t inversion)
-{
- u8 feciqinv = at76c651_readreg(state, 0x60);
-
- switch (inversion) {
- case INVERSION_OFF:
- feciqinv |= 0x02;
- feciqinv &= 0xFE;
- break;
-
- case INVERSION_ON:
- feciqinv |= 0x03;
- break;
-
- case INVERSION_AUTO:
- feciqinv &= 0xFC;
- break;
-
- default:
- return -EINVAL;
- }
-
- return at76c651_writereg(state, 0x60, feciqinv);
-}
-
-static int at76c651_set_parameters(struct dvb_frontend* fe,
- struct dvb_frontend_parameters *p)
-{
- int ret;
- struct at76c651_state* state = fe->demodulator_priv;
-
- at76c651_writereg(state, 0x0c, 0xc3);
- state->config->pll_set(fe, p);
- at76c651_writereg(state, 0x0c, 0xc2);
-
- if ((ret = at76c651_set_symbol_rate(state, p->u.qam.symbol_rate)))
- return ret;
-
- if ((ret = at76c651_set_inversion(state, p->inversion)))
- return ret;
-
- return at76c651_set_auto_config(state);
-}
-
-static int at76c651_set_defaults(struct dvb_frontend* fe)
-{
- struct at76c651_state* state = fe->demodulator_priv;
-
- at76c651_set_symbol_rate(state, 6900000);
- at76c651_set_qam(state, QAM_64);
- at76c651_set_bbfreq(state);
- at76c651_set_auto_config(state);
-
- if (state->config->pll_init) {
- at76c651_writereg(state, 0x0c, 0xc3);
- state->config->pll_init(fe);
- at76c651_writereg(state, 0x0c, 0xc2);
- }
-
- return 0;
-}
-
-static int at76c651_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
- struct at76c651_state* state = fe->demodulator_priv;
- u8 sync;
-
- /*
- * Bits: FEC, CAR, EQU, TIM, AGC2, AGC1, ADC, PLL (PLL=0)
- */
- sync = at76c651_readreg(state, 0x80);
- *status = 0;
-
- if (sync & (0x04 | 0x10)) /* AGC1 || TIM */
- *status |= FE_HAS_SIGNAL;
- if (sync & 0x10) /* TIM */
- *status |= FE_HAS_CARRIER;
- if (sync & 0x80) /* FEC */
- *status |= FE_HAS_VITERBI;
- if (sync & 0x40) /* CAR */
- *status |= FE_HAS_SYNC;
- if ((sync & 0xF0) == 0xF0) /* TIM && EQU && CAR && FEC */
- *status |= FE_HAS_LOCK;
-
- return 0;
-}
-
-static int at76c651_read_ber(struct dvb_frontend* fe, u32* ber)
-{
- struct at76c651_state* state = fe->demodulator_priv;
-
- *ber = (at76c651_readreg(state, 0x81) & 0x0F) << 16;
- *ber |= at76c651_readreg(state, 0x82) << 8;
- *ber |= at76c651_readreg(state, 0x83);
- *ber *= 10;
-
- return 0;
-}
-
-static int at76c651_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
- struct at76c651_state* state = fe->demodulator_priv;
-
- u8 gain = ~at76c651_readreg(state, 0x91);
- *strength = (gain << 8) | gain;
-
- return 0;
-}
-
-static int at76c651_read_snr(struct dvb_frontend* fe, u16* snr)
-{
- struct at76c651_state* state = fe->demodulator_priv;
-
- *snr = 0xFFFF -
- ((at76c651_readreg(state, 0x8F) << 8) |
- at76c651_readreg(state, 0x90));
-
- return 0;
-}
-
-static int at76c651_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
- struct at76c651_state* state = fe->demodulator_priv;
-
- *ucblocks = at76c651_readreg(state, 0x82);
-
- return 0;
-}
-
-static int at76c651_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *fesettings)
-{
- fesettings->min_delay_ms = 50;
- fesettings->step_size = 0;
- fesettings->max_drift = 0;
- return 0;
-}
-
-static void at76c651_release(struct dvb_frontend* fe)
-{
- struct at76c651_state* state = fe->demodulator_priv;
- kfree(state);
-}
-
-static struct dvb_frontend_ops at76c651_ops;
-
-struct dvb_frontend* at76c651_attach(const struct at76c651_config* config,
- struct i2c_adapter* i2c)
-{
- struct at76c651_state* state = NULL;
-
- /* allocate memory for the internal state */
- state = kmalloc(sizeof(struct at76c651_state), GFP_KERNEL);
- if (state == NULL) goto error;
-
- /* setup the state */
- state->config = config;
- state->qam = 0;
-
- /* check if the demod is there */
- if (at76c651_readreg(state, 0x0e) != 0x65) goto error;
-
- /* finalise state setup */
- state->i2c = i2c;
- state->revision = at76c651_readreg(state, 0x0f) & 0xfe;
- memcpy(&state->ops, &at76c651_ops, sizeof(struct dvb_frontend_ops));
-
- /* create dvb_frontend */
- state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- kfree(state);
- return NULL;
-}
-
-static struct dvb_frontend_ops at76c651_ops = {
-
- .info = {
- .name = "Atmel AT76C651B DVB-C",
- .type = FE_QAM,
- .frequency_min = 48250000,
- .frequency_max = 863250000,
- .frequency_stepsize = 62500,
- /*.frequency_tolerance = */ /* FIXME: 12% of SR */
- .symbol_rate_min = 0, /* FIXME */
- .symbol_rate_max = 9360000, /* FIXME */
- .symbol_rate_tolerance = 4000,
- .caps = FE_CAN_INVERSION_AUTO |
- FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
- FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
- FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
- FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 | FE_CAN_QAM_128 |
- FE_CAN_MUTE_TS | FE_CAN_QAM_256 | FE_CAN_RECOVER
- },
-
- .release = at76c651_release,
-
- .init = at76c651_set_defaults,
-
- .set_frontend = at76c651_set_parameters,
- .get_tune_settings = at76c651_get_tune_settings,
-
- .read_status = at76c651_read_status,
- .read_ber = at76c651_read_ber,
- .read_signal_strength = at76c651_read_signal_strength,
- .read_snr = at76c651_read_snr,
- .read_ucblocks = at76c651_read_ucblocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Atmel AT76C651 DVB-C Demodulator Driver");
-MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(at76c651_attach);
diff --git a/drivers/media/dvb/frontends/at76c651.h b/drivers/media/dvb/frontends/at76c651.h
deleted file mode 100644
index 34054df..0000000
--- a/drivers/media/dvb/frontends/at76c651.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * at76c651.c
- *
- * Atmel DVB-C Frontend Driver (at76c651)
- *
- * Copyright (C) 2001 fnbrd <fnbrd@gmx.de>
- * & 2002-2004 Andreas Oberritter <obi@linuxtv.org>
- * & 2003 Wolfram Joost <dbox2@frokaschwei.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * AT76C651
- * http://www.nalanda.nitc.ac.in/industry/datasheets/atmel/acrobat/doc1293.pdf
- * http://www.atmel.com/atmel/acrobat/doc1320.pdf
- */
-
-#ifndef AT76C651_H
-#define AT76C651_H
-
-#include <linux/dvb/frontend.h>
-
-struct at76c651_config
-{
- /* the demodulator's i2c address */
- u8 demod_address;
-
- /* PLL maintenance */
- int (*pll_init)(struct dvb_frontend* fe);
- int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
-};
-
-extern struct dvb_frontend* at76c651_attach(const struct at76c651_config* config,
- struct i2c_adapter* i2c);
-
-#endif // AT76C651_H
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index 1b9934e..4dcb605 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -326,11 +326,11 @@
};
EXPORT_SYMBOL(dvb_pll_tuv1236d);
-/* Samsung TBMV30111IN
+/* Samsung TBMV30111IN / TBMV30712IN1
* used in Air2PC ATSC - 2nd generation (nxt2002)
*/
-struct dvb_pll_desc dvb_pll_tbmv30111in = {
- .name = "Samsung TBMV30111IN",
+struct dvb_pll_desc dvb_pll_samsung_tbmv = {
+ .name = "Samsung TBMV30111IN / TBMV30712IN1",
.min = 54000000,
.max = 860000000,
.count = 6,
@@ -343,7 +343,7 @@
{ 999999999, 44000000, 166666, 0xfc, 0x02 },
}
};
-EXPORT_SYMBOL(dvb_pll_tbmv30111in);
+EXPORT_SYMBOL(dvb_pll_samsung_tbmv);
/*
* Philips SD1878 Tuner.
diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h
index f682c09..bb8d4b4 100644
--- a/drivers/media/dvb/frontends/dvb-pll.h
+++ b/drivers/media/dvb/frontends/dvb-pll.h
@@ -38,7 +38,7 @@
extern struct dvb_pll_desc dvb_pll_tuv1236d;
extern struct dvb_pll_desc dvb_pll_tdhu2;
-extern struct dvb_pll_desc dvb_pll_tbmv30111in;
+extern struct dvb_pll_desc dvb_pll_samsung_tbmv;
extern struct dvb_pll_desc dvb_pll_philips_sd1878_tda8261;
int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
diff --git a/drivers/media/dvb/frontends/nxt2002.c b/drivers/media/dvb/frontends/nxt2002.c
deleted file mode 100644
index 4f263e6..0000000
--- a/drivers/media/dvb/frontends/nxt2002.c
+++ /dev/null
@@ -1,706 +0,0 @@
-/*
- Support for B2C2/BBTI Technisat Air2PC - ATSC
-
- Copyright (C) 2004 Taylor Jacob <rtjacob@earthlink.net>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-/*
- * This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" to
- * download/extract it, and then copy it to /usr/lib/hotplug/firmware
- * or /lib/firmware (depending on configuration of firmware hotplug).
- */
-#define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw"
-#define CRC_CCIT_MASK 0x1021
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "nxt2002.h"
-
-struct nxt2002_state {
-
- struct i2c_adapter* i2c;
- struct dvb_frontend_ops ops;
- const struct nxt2002_config* config;
- struct dvb_frontend frontend;
-
- /* demodulator private data */
- u8 initialised:1;
-};
-
-static int debug;
-#define dprintk(args...) \
- do { \
- if (debug) printk(KERN_DEBUG "nxt2002: " args); \
- } while (0)
-
-static int i2c_writebytes (struct nxt2002_state* state, u8 reg, u8 *buf, u8 len)
-{
- /* probbably a much better way or doing this */
- u8 buf2 [256],x;
- int err;
- struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf2, .len = len + 1 };
-
- buf2[0] = reg;
- for (x = 0 ; x < len ; x++)
- buf2[x+1] = buf[x];
-
- if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
- printk ("%s: i2c write error (addr %02x, err == %i)\n",
- __FUNCTION__, state->config->demod_address, err);
- return -EREMOTEIO;
- }
-
- return 0;
-}
-
-static u8 i2c_readbytes (struct nxt2002_state* state, u8 reg, u8* buf, u8 len)
-{
- u8 reg2 [] = { reg };
-
- struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = reg2, .len = 1 },
- { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } };
-
- int err;
-
- if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
- printk ("%s: i2c read error (addr %02x, err == %i)\n",
- __FUNCTION__, state->config->demod_address, err);
- return -EREMOTEIO;
- }
-
- return 0;
-}
-
-static u16 nxt2002_crc(u16 crc, u8 c)
-{
-
- u8 i;
- u16 input = (u16) c & 0xFF;
-
- input<<=8;
- for(i=0 ;i<8 ;i++) {
- if((crc ^ input) & 0x8000)
- crc=(crc<<1)^CRC_CCIT_MASK;
- else
- crc<<=1;
- input<<=1;
- }
- return crc;
-}
-
-static int nxt2002_writereg_multibyte (struct nxt2002_state* state, u8 reg, u8* data, u8 len)
-{
- u8 buf;
- dprintk("%s\n", __FUNCTION__);
-
- /* set multi register length */
- i2c_writebytes(state,0x34,&len,1);
-
- /* set mutli register register */
- i2c_writebytes(state,0x35,®,1);
-
- /* send the actual data */
- i2c_writebytes(state,0x36,data,len);
-
- /* toggle the multireg write bit*/
- buf = 0x02;
- i2c_writebytes(state,0x21,&buf,1);
-
- i2c_readbytes(state,0x21,&buf,1);
-
- if ((buf & 0x02) == 0)
- return 0;
-
- dprintk("Error writing multireg register %02X\n",reg);
-
- return 0;
-}
-
-static int nxt2002_readreg_multibyte (struct nxt2002_state* state, u8 reg, u8* data, u8 len)
-{
- u8 len2;
- dprintk("%s\n", __FUNCTION__);
-
- /* set multi register length */
- len2 = len & 0x80;
- i2c_writebytes(state,0x34,&len2,1);
-
- /* set mutli register register */
- i2c_writebytes(state,0x35,®,1);
-
- /* send the actual data */
- i2c_readbytes(state,reg,data,len);
-
- return 0;
-}
-
-static void nxt2002_microcontroller_stop (struct nxt2002_state* state)
-{
- u8 buf[2],counter = 0;
- dprintk("%s\n", __FUNCTION__);
-
- buf[0] = 0x80;
- i2c_writebytes(state,0x22,buf,1);
-
- while (counter < 20) {
- i2c_readbytes(state,0x31,buf,1);
- if (buf[0] & 0x40)
- return;
- msleep(10);
- counter++;
- }
-
- dprintk("Timeout waiting for micro to stop.. This is ok after firmware upload\n");
- return;
-}
-
-static void nxt2002_microcontroller_start (struct nxt2002_state* state)
-{
- u8 buf;
- dprintk("%s\n", __FUNCTION__);
-
- buf = 0x00;
- i2c_writebytes(state,0x22,&buf,1);
-}
-
-static int nxt2002_writetuner (struct nxt2002_state* state, u8* data)
-{
- u8 buf,count = 0;
-
- dprintk("Tuner Bytes: %02X %02X %02X %02X\n",data[0],data[1],data[2],data[3]);
-
- dprintk("%s\n", __FUNCTION__);
- /* stop the micro first */
- nxt2002_microcontroller_stop(state);
-
- /* set the i2c transfer speed to the tuner */
- buf = 0x03;
- i2c_writebytes(state,0x20,&buf,1);
-
- /* setup to transfer 4 bytes via i2c */
- buf = 0x04;
- i2c_writebytes(state,0x34,&buf,1);
-
- /* write actual tuner bytes */
- i2c_writebytes(state,0x36,data,4);
-
- /* set tuner i2c address */
- buf = 0xC2;
- i2c_writebytes(state,0x35,&buf,1);
-
- /* write UC Opmode to begin transfer */
- buf = 0x80;
- i2c_writebytes(state,0x21,&buf,1);
-
- while (count < 20) {
- i2c_readbytes(state,0x21,&buf,1);
- if ((buf & 0x80)== 0x00)
- return 0;
- msleep(100);
- count++;
- }
-
- printk("nxt2002: timeout error writing tuner\n");
- return 0;
-}
-
-static void nxt2002_agc_reset(struct nxt2002_state* state)
-{
- u8 buf;
- dprintk("%s\n", __FUNCTION__);
-
- buf = 0x08;
- i2c_writebytes(state,0x08,&buf,1);
-
- buf = 0x00;
- i2c_writebytes(state,0x08,&buf,1);
-
- return;
-}
-
-static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
-{
-
- struct nxt2002_state* state = fe->demodulator_priv;
- u8 buf[256],written = 0,chunkpos = 0;
- u16 rambase,position,crc = 0;
-
- dprintk("%s\n", __FUNCTION__);
- dprintk("Firmware is %zu bytes\n",fw->size);
-
- /* Get the RAM base for this nxt2002 */
- i2c_readbytes(state,0x10,buf,1);
-
- if (buf[0] & 0x10)
- rambase = 0x1000;
- else
- rambase = 0x0000;
-
- dprintk("rambase on this nxt2002 is %04X\n",rambase);
-
- /* Hold the micro in reset while loading firmware */
- buf[0] = 0x80;
- i2c_writebytes(state,0x2B,buf,1);
-
- for (position = 0; position < fw->size ; position++) {
- if (written == 0) {
- crc = 0;
- chunkpos = 0x28;
- buf[0] = ((rambase + position) >> 8);
- buf[1] = (rambase + position) & 0xFF;
- buf[2] = 0x81;
- /* write starting address */
- i2c_writebytes(state,0x29,buf,3);
- }
- written++;
- chunkpos++;
-
- if ((written % 4) == 0)
- i2c_writebytes(state,chunkpos,&fw->data[position-3],4);
-
- crc = nxt2002_crc(crc,fw->data[position]);
-
- if ((written == 255) || (position+1 == fw->size)) {
- /* write remaining bytes of firmware */
- i2c_writebytes(state, chunkpos+4-(written %4),
- &fw->data[position-(written %4) + 1],
- written %4);
- buf[0] = crc << 8;
- buf[1] = crc & 0xFF;
-
- /* write crc */
- i2c_writebytes(state,0x2C,buf,2);
-
- /* do a read to stop things */
- i2c_readbytes(state,0x2A,buf,1);
-
- /* set transfer mode to complete */
- buf[0] = 0x80;
- i2c_writebytes(state,0x2B,buf,1);
-
- written = 0;
- }
- }
-
- printk ("done.\n");
- return 0;
-};
-
-static int nxt2002_setup_frontend_parameters (struct dvb_frontend* fe,
- struct dvb_frontend_parameters *p)
-{
- struct nxt2002_state* state = fe->demodulator_priv;
- u32 freq = 0;
- u16 tunerfreq = 0;
- u8 buf[4];
-
- freq = 44000 + ( p->frequency / 1000 );
-
- dprintk("freq = %d p->frequency = %d\n",freq,p->frequency);
-
- tunerfreq = freq * 24/4000;
-
- buf[0] = (tunerfreq >> 8) & 0x7F;
- buf[1] = (tunerfreq & 0xFF);
-
- if (p->frequency <= 214000000) {
- buf[2] = 0x84 + (0x06 << 3);
- buf[3] = (p->frequency <= 172000000) ? 0x01 : 0x02;
- } else if (p->frequency <= 721000000) {
- buf[2] = 0x84 + (0x07 << 3);
- buf[3] = (p->frequency <= 467000000) ? 0x02 : 0x08;
- } else if (p->frequency <= 841000000) {
- buf[2] = 0x84 + (0x0E << 3);
- buf[3] = 0x08;
- } else {
- buf[2] = 0x84 + (0x0F << 3);
- buf[3] = 0x02;
- }
-
- /* write frequency information */
- nxt2002_writetuner(state,buf);
-
- /* reset the agc now that tuning has been completed */
- nxt2002_agc_reset(state);
-
- /* set target power level */
- switch (p->u.vsb.modulation) {
- case QAM_64:
- case QAM_256:
- buf[0] = 0x74;
- break;
- case VSB_8:
- buf[0] = 0x70;
- break;
- default:
- return -EINVAL;
- break;
- }
- i2c_writebytes(state,0x42,buf,1);
-
- /* configure sdm */
- buf[0] = 0x87;
- i2c_writebytes(state,0x57,buf,1);
-
- /* write sdm1 input */
- buf[0] = 0x10;
- buf[1] = 0x00;
- nxt2002_writereg_multibyte(state,0x58,buf,2);
-
- /* write sdmx input */
- switch (p->u.vsb.modulation) {
- case QAM_64:
- buf[0] = 0x68;
- break;
- case QAM_256:
- buf[0] = 0x64;
- break;
- case VSB_8:
- buf[0] = 0x60;
- break;
- default:
- return -EINVAL;
- break;
- }
- buf[1] = 0x00;
- nxt2002_writereg_multibyte(state,0x5C,buf,2);
-
- /* write adc power lpf fc */
- buf[0] = 0x05;
- i2c_writebytes(state,0x43,buf,1);
-
- /* write adc power lpf fc */
- buf[0] = 0x05;
- i2c_writebytes(state,0x43,buf,1);
-
- /* write accumulator2 input */
- buf[0] = 0x80;
- buf[1] = 0x00;
- nxt2002_writereg_multibyte(state,0x4B,buf,2);
-
- /* write kg1 */
- buf[0] = 0x00;
- i2c_writebytes(state,0x4D,buf,1);
-
- /* write sdm12 lpf fc */
- buf[0] = 0x44;
- i2c_writebytes(state,0x55,buf,1);
-
- /* write agc control reg */
- buf[0] = 0x04;
- i2c_writebytes(state,0x41,buf,1);
-
- /* write agc ucgp0 */
- switch (p->u.vsb.modulation) {
- case QAM_64:
- buf[0] = 0x02;
- break;
- case QAM_256:
- buf[0] = 0x03;
- break;
- case VSB_8:
- buf[0] = 0x00;
- break;
- default:
- return -EINVAL;
- break;
- }
- i2c_writebytes(state,0x30,buf,1);
-
- /* write agc control reg */
- buf[0] = 0x00;
- i2c_writebytes(state,0x41,buf,1);
-
- /* write accumulator2 input */
- buf[0] = 0x80;
- buf[1] = 0x00;
- nxt2002_writereg_multibyte(state,0x49,buf,2);
- nxt2002_writereg_multibyte(state,0x4B,buf,2);
-
- /* write agc control reg */
- buf[0] = 0x04;
- i2c_writebytes(state,0x41,buf,1);
-
- nxt2002_microcontroller_start(state);
-
- /* adjacent channel detection should be done here, but I don't
- have any stations with this need so I cannot test it */
-
- return 0;
-}
-
-static int nxt2002_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
- struct nxt2002_state* state = fe->demodulator_priv;
- u8 lock;
- i2c_readbytes(state,0x31,&lock,1);
-
- *status = 0;
- if (lock & 0x20) {
- *status |= FE_HAS_SIGNAL;
- *status |= FE_HAS_CARRIER;
- *status |= FE_HAS_VITERBI;
- *status |= FE_HAS_SYNC;
- *status |= FE_HAS_LOCK;
- }
- return 0;
-}
-
-static int nxt2002_read_ber(struct dvb_frontend* fe, u32* ber)
-{
- struct nxt2002_state* state = fe->demodulator_priv;
- u8 b[3];
-
- nxt2002_readreg_multibyte(state,0xE6,b,3);
-
- *ber = ((b[0] << 8) + b[1]) * 8;
-
- return 0;
-}
-
-static int nxt2002_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
- struct nxt2002_state* state = fe->demodulator_priv;
- u8 b[2];
- u16 temp = 0;
-
- /* setup to read cluster variance */
- b[0] = 0x00;
- i2c_writebytes(state,0xA1,b,1);
-
- /* get multreg val */
- nxt2002_readreg_multibyte(state,0xA6,b,2);
-
- temp = (b[0] << 8) | b[1];
- *strength = ((0x7FFF - temp) & 0x0FFF) * 16;
-
- return 0;
-}
-
-static int nxt2002_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-
- struct nxt2002_state* state = fe->demodulator_priv;
- u8 b[2];
- u16 temp = 0, temp2;
- u32 snrdb = 0;
-
- /* setup to read cluster variance */
- b[0] = 0x00;
- i2c_writebytes(state,0xA1,b,1);
-
- /* get multreg val from 0xA6 */
- nxt2002_readreg_multibyte(state,0xA6,b,2);
-
- temp = (b[0] << 8) | b[1];
- temp2 = 0x7FFF - temp;
-
- /* snr will be in db */
- if (temp2 > 0x7F00)
- snrdb = 1000*24 + ( 1000*(30-24) * ( temp2 - 0x7F00 ) / ( 0x7FFF - 0x7F00 ) );
- else if (temp2 > 0x7EC0)
- snrdb = 1000*18 + ( 1000*(24-18) * ( temp2 - 0x7EC0 ) / ( 0x7F00 - 0x7EC0 ) );
- else if (temp2 > 0x7C00)
- snrdb = 1000*12 + ( 1000*(18-12) * ( temp2 - 0x7C00 ) / ( 0x7EC0 - 0x7C00 ) );
- else
- snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) );
-
- /* the value reported back from the frontend will be FFFF=32db 0000=0db */
-
- *snr = snrdb * (0xFFFF/32000);
-
- return 0;
-}
-
-static int nxt2002_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
- struct nxt2002_state* state = fe->demodulator_priv;
- u8 b[3];
-
- nxt2002_readreg_multibyte(state,0xE6,b,3);
- *ucblocks = b[2];
-
- return 0;
-}
-
-static int nxt2002_sleep(struct dvb_frontend* fe)
-{
- return 0;
-}
-
-static int nxt2002_init(struct dvb_frontend* fe)
-{
- struct nxt2002_state* state = fe->demodulator_priv;
- const struct firmware *fw;
- int ret;
- u8 buf[2];
-
- if (!state->initialised) {
- /* request the firmware, this will block until someone uploads it */
- printk("nxt2002: Waiting for firmware upload (%s)...\n", NXT2002_DEFAULT_FIRMWARE);
- ret = state->config->request_firmware(fe, &fw, NXT2002_DEFAULT_FIRMWARE);
- printk("nxt2002: Waiting for firmware upload(2)...\n");
- if (ret) {
- printk("nxt2002: no firmware upload (timeout or file not found?)\n");
- return ret;
- }
-
- ret = nxt2002_load_firmware(fe, fw);
- if (ret) {
- printk("nxt2002: writing firmware to device failed\n");
- release_firmware(fw);
- return ret;
- }
- printk("nxt2002: firmware upload complete\n");
-
- /* Put the micro into reset */
- nxt2002_microcontroller_stop(state);
-
- /* ensure transfer is complete */
- buf[0]=0;
- i2c_writebytes(state,0x2B,buf,1);
-
- /* Put the micro into reset for real this time */
- nxt2002_microcontroller_stop(state);
-
- /* soft reset everything (agc,frontend,eq,fec)*/
- buf[0] = 0x0F;
- i2c_writebytes(state,0x08,buf,1);
- buf[0] = 0x00;
- i2c_writebytes(state,0x08,buf,1);
-
- /* write agc sdm configure */
- buf[0] = 0xF1;
- i2c_writebytes(state,0x57,buf,1);
-
- /* write mod output format */
- buf[0] = 0x20;
- i2c_writebytes(state,0x09,buf,1);
-
- /* write fec mpeg mode */
- buf[0] = 0x7E;
- buf[1] = 0x00;
- i2c_writebytes(state,0xE9,buf,2);
-
- /* write mux selection */
- buf[0] = 0x00;
- i2c_writebytes(state,0xCC,buf,1);
-
- state->initialised = 1;
- }
-
- return 0;
-}
-
-static int nxt2002_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
- fesettings->min_delay_ms = 500;
- fesettings->step_size = 0;
- fesettings->max_drift = 0;
- return 0;
-}
-
-static void nxt2002_release(struct dvb_frontend* fe)
-{
- struct nxt2002_state* state = fe->demodulator_priv;
- kfree(state);
-}
-
-static struct dvb_frontend_ops nxt2002_ops;
-
-struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config,
- struct i2c_adapter* i2c)
-{
- struct nxt2002_state* state = NULL;
- u8 buf [] = {0,0,0,0,0};
-
- /* allocate memory for the internal state */
- state = kmalloc(sizeof(struct nxt2002_state), GFP_KERNEL);
- if (state == NULL) goto error;
-
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- memcpy(&state->ops, &nxt2002_ops, sizeof(struct dvb_frontend_ops));
- state->initialised = 0;
-
- /* Check the first 5 registers to ensure this a revision we can handle */
-
- i2c_readbytes(state, 0x00, buf, 5);
- if (buf[0] != 0x04) goto error; /* device id */
- if (buf[1] != 0x02) goto error; /* fab id */
- if (buf[2] != 0x11) goto error; /* month */
- if (buf[3] != 0x20) goto error; /* year msb */
- if (buf[4] != 0x00) goto error; /* year lsb */
-
- /* create dvb_frontend */
- state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- kfree(state);
- return NULL;
-}
-
-static struct dvb_frontend_ops nxt2002_ops = {
-
- .info = {
- .name = "Nextwave nxt2002 VSB/QAM frontend",
- .type = FE_ATSC,
- .frequency_min = 54000000,
- .frequency_max = 860000000,
- /* stepsize is just a guess */
- .frequency_stepsize = 166666,
- .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
- FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
- FE_CAN_8VSB | FE_CAN_QAM_64 | FE_CAN_QAM_256
- },
-
- .release = nxt2002_release,
-
- .init = nxt2002_init,
- .sleep = nxt2002_sleep,
-
- .set_frontend = nxt2002_setup_frontend_parameters,
- .get_tune_settings = nxt2002_get_tune_settings,
-
- .read_status = nxt2002_read_status,
- .read_ber = nxt2002_read_ber,
- .read_signal_strength = nxt2002_read_signal_strength,
- .read_snr = nxt2002_read_snr,
- .read_ucblocks = nxt2002_read_ucblocks,
-
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("NXT2002 ATSC (8VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver");
-MODULE_AUTHOR("Taylor Jacob");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(nxt2002_attach);
diff --git a/drivers/media/dvb/frontends/nxt2002.h b/drivers/media/dvb/frontends/nxt2002.h
deleted file mode 100644
index 462301f..0000000
--- a/drivers/media/dvb/frontends/nxt2002.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- Driver for the Nxt2002 demodulator
-*/
-
-#ifndef NXT2002_H
-#define NXT2002_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/firmware.h>
-
-struct nxt2002_config
-{
- /* the demodulator's i2c address */
- u8 demod_address;
-
- /* request firmware for device */
- int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
-};
-
-extern struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config,
- struct i2c_adapter* i2c);
-
-#endif // NXT2002_H
diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c
index 78d2b93..9e353539 100644
--- a/drivers/media/dvb/frontends/nxt200x.c
+++ b/drivers/media/dvb/frontends/nxt200x.c
@@ -1,9 +1,10 @@
/*
* Support for NXT2002 and NXT2004 - VSB/QAM
*
- * Copyright (C) 2005 Kirk Lapray (kirk.lapray@gmail.com)
+ * Copyright (C) 2005 Kirk Lapray <kirk.lapray@gmail.com>
+ * Copyright (C) 2006 Michael Krufky <mkrufky@m1k.net>
* based on nxt2002 by Taylor Jacob <rtjacob@earthlink.net>
- * and nxt2004 by Jean-Francois Thibert (jeanfrancois@sagetv.com)
+ * and nxt2004 by Jean-Francois Thibert <jeanfrancois@sagetv.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -614,7 +615,17 @@
/* write sdm1 input */
buf[0] = 0x10;
buf[1] = 0x00;
- nxt200x_writebytes(state, 0x58, buf, 2);
+ switch (state->demod_chip) {
+ case NXT2002:
+ nxt200x_writereg_multibyte(state, 0x58, buf, 2);
+ break;
+ case NXT2004:
+ nxt200x_writebytes(state, 0x58, buf, 2);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
/* write sdmx input */
switch (p->u.vsb.modulation) {
@@ -632,7 +643,17 @@
break;
}
buf[1] = 0x00;
- nxt200x_writebytes(state, 0x5C, buf, 2);
+ switch (state->demod_chip) {
+ case NXT2002:
+ nxt200x_writereg_multibyte(state, 0x5C, buf, 2);
+ break;
+ case NXT2004:
+ nxt200x_writebytes(state, 0x5C, buf, 2);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
/* write adc power lpf fc */
buf[0] = 0x05;
@@ -648,7 +669,17 @@
/* write accumulator2 input */
buf[0] = 0x80;
buf[1] = 0x00;
- nxt200x_writebytes(state, 0x4B, buf, 2);
+ switch (state->demod_chip) {
+ case NXT2002:
+ nxt200x_writereg_multibyte(state, 0x4B, buf, 2);
+ break;
+ case NXT2004:
+ nxt200x_writebytes(state, 0x4B, buf, 2);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
/* write kg1 */
buf[0] = 0x00;
@@ -714,8 +745,19 @@
/* write accumulator2 input */
buf[0] = 0x80;
buf[1] = 0x00;
- nxt200x_writebytes(state, 0x49, buf,2);
- nxt200x_writebytes(state, 0x4B, buf,2);
+ switch (state->demod_chip) {
+ case NXT2002:
+ nxt200x_writereg_multibyte(state, 0x49, buf, 2);
+ nxt200x_writereg_multibyte(state, 0x4B, buf, 2);
+ break;
+ case NXT2004:
+ nxt200x_writebytes(state, 0x49, buf, 2);
+ nxt200x_writebytes(state, 0x4B, buf, 2);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
/* write agc control reg */
buf[0] = 0x04;
@@ -1199,7 +1241,7 @@
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
MODULE_DESCRIPTION("NXT200X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
-MODULE_AUTHOR("Kirk Lapray, Jean-Francois Thibert, and Taylor Jacob");
+MODULE_AUTHOR("Kirk Lapray, Michael Krufky, Jean-Francois Thibert, and Taylor Jacob");
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(nxt200x_attach);
diff --git a/drivers/media/dvb/frontends/tda80xx.c b/drivers/media/dvb/frontends/tda80xx.c
deleted file mode 100644
index d1cabb6..0000000
--- a/drivers/media/dvb/frontends/tda80xx.c
+++ /dev/null
@@ -1,734 +0,0 @@
-/*
- * tda80xx.c
- *
- * Philips TDA8044 / TDA8083 QPSK demodulator driver
- *
- * Copyright (C) 2001 Felix Domke <tmbinc@elitedvb.net>
- * Copyright (C) 2002-2004 Andreas Oberritter <obi@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/config.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/threads.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <asm/irq.h>
-#include <asm/div64.h>
-
-#include "dvb_frontend.h"
-#include "tda80xx.h"
-
-enum {
- ID_TDA8044 = 0x04,
- ID_TDA8083 = 0x05,
-};
-
-
-struct tda80xx_state {
-
- struct i2c_adapter* i2c;
-
- struct dvb_frontend_ops ops;
-
- /* configuration settings */
- const struct tda80xx_config* config;
-
- struct dvb_frontend frontend;
-
- u32 clk;
- int afc_loop;
- struct work_struct worklet;
- fe_code_rate_t code_rate;
- fe_spectral_inversion_t spectral_inversion;
- fe_status_t status;
- u8 id;
-};
-
-static int debug = 1;
-#define dprintk if (debug) printk
-
-static u8 tda8044_inittab_pre[] = {
- 0x02, 0x00, 0x6f, 0xb5, 0x86, 0x22, 0x00, 0xea,
- 0x30, 0x42, 0x98, 0x68, 0x70, 0x42, 0x99, 0x58,
- 0x95, 0x10, 0xf5, 0xe7, 0x93, 0x0b, 0x15, 0x68,
- 0x9a, 0x90, 0x61, 0x80, 0x00, 0xe0, 0x40, 0x00,
- 0x0f, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00
-};
-
-static u8 tda8044_inittab_post[] = {
- 0x04, 0x00, 0x6f, 0xb5, 0x86, 0x22, 0x00, 0xea,
- 0x30, 0x42, 0x98, 0x68, 0x70, 0x42, 0x99, 0x50,
- 0x95, 0x10, 0xf5, 0xe7, 0x93, 0x0b, 0x15, 0x68,
- 0x9a, 0x90, 0x61, 0x80, 0x00, 0xe0, 0x40, 0x6c,
- 0x0f, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00
-};
-
-static u8 tda8083_inittab[] = {
- 0x04, 0x00, 0x4a, 0x79, 0x04, 0x00, 0xff, 0xea,
- 0x48, 0x42, 0x79, 0x60, 0x70, 0x52, 0x9a, 0x10,
- 0x0e, 0x10, 0xf2, 0xa7, 0x93, 0x0b, 0x05, 0xc8,
- 0x9d, 0x00, 0x42, 0x80, 0x00, 0x60, 0x40, 0x00,
- 0x00, 0x75, 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00
-};
-
-static __inline__ u32 tda80xx_div(u32 a, u32 b)
-{
- return (a + (b / 2)) / b;
-}
-
-static __inline__ u32 tda80xx_gcd(u32 a, u32 b)
-{
- u32 r;
-
- while ((r = a % b)) {
- a = b;
- b = r;
- }
-
- return b;
-}
-
-static int tda80xx_read(struct tda80xx_state* state, u8 reg, u8 *buf, u8 len)
-{
- int ret;
- struct i2c_msg msg[] = { { .addr = state->config->demod_address, .flags = 0, .buf = ®, .len = 1 },
- { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } };
-
- ret = i2c_transfer(state->i2c, msg, 2);
-
- if (ret != 2)
- dprintk("%s: readreg error (reg %02x, ret == %i)\n",
- __FUNCTION__, reg, ret);
-
- mdelay(10);
-
- return (ret == 2) ? 0 : -EREMOTEIO;
-}
-
-static int tda80xx_write(struct tda80xx_state* state, u8 reg, const u8 *buf, u8 len)
-{
- int ret;
- u8 wbuf[len + 1];
- struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = wbuf, .len = len + 1 };
-
- wbuf[0] = reg;
- memcpy(&wbuf[1], buf, len);
-
- ret = i2c_transfer(state->i2c, &msg, 1);
-
- if (ret != 1)
- dprintk("%s: i2c xfer error (ret == %i)\n", __FUNCTION__, ret);
-
- mdelay(10);
-
- return (ret == 1) ? 0 : -EREMOTEIO;
-}
-
-static __inline__ u8 tda80xx_readreg(struct tda80xx_state* state, u8 reg)
-{
- u8 val;
-
- tda80xx_read(state, reg, &val, 1);
-
- return val;
-}
-
-static __inline__ int tda80xx_writereg(struct tda80xx_state* state, u8 reg, u8 data)
-{
- return tda80xx_write(state, reg, &data, 1);
-}
-
-static int tda80xx_set_parameters(struct tda80xx_state* state,
- fe_spectral_inversion_t inversion,
- u32 symbol_rate,
- fe_code_rate_t fec_inner)
-{
- u8 buf[15];
- u64 ratio;
- u32 clk;
- u32 k;
- u32 sr = symbol_rate;
- u32 gcd;
- u8 scd;
-
- if (symbol_rate > (state->clk * 3) / 16)
- scd = 0;
- else if (symbol_rate > (state->clk * 3) / 32)
- scd = 1;
- else if (symbol_rate > (state->clk * 3) / 64)
- scd = 2;
- else
- scd = 3;
-
- clk = scd ? (state->clk / (scd * 2)) : state->clk;
-
- /*
- * Viterbi decoder:
- * Differential decoding off
- * Spectral inversion unknown
- * QPSK modulation
- */
- if (inversion == INVERSION_ON)
- buf[0] = 0x60;
- else if (inversion == INVERSION_OFF)
- buf[0] = 0x20;
- else
- buf[0] = 0x00;
-
- /*
- * CLK ratio:
- * system clock frequency is up to 64 or 96 MHz
- *
- * formula:
- * r = k * clk / symbol_rate
- *
- * k: 2^21 for caa 0..3,
- * 2^20 for caa 4..5,
- * 2^19 for caa 6..7
- */
- if (symbol_rate <= (clk * 3) / 32)
- k = (1 << 19);
- else if (symbol_rate <= (clk * 3) / 16)
- k = (1 << 20);
- else
- k = (1 << 21);
-
- gcd = tda80xx_gcd(clk, sr);
- clk /= gcd;
- sr /= gcd;
-
- gcd = tda80xx_gcd(k, sr);
- k /= gcd;
- sr /= gcd;
-
- ratio = (u64)k * (u64)clk;
- do_div(ratio, sr);
-
- buf[1] = ratio >> 16;
- buf[2] = ratio >> 8;
- buf[3] = ratio;
-
- /* nyquist filter roll-off factor 35% */
- buf[4] = 0x20;
-
- clk = scd ? (state->clk / (scd * 2)) : state->clk;
-
- /* Anti Alias Filter */
- if (symbol_rate < (clk * 3) / 64)
- printk("tda80xx: unsupported symbol rate: %u\n", symbol_rate);
- else if (symbol_rate <= clk / 16)
- buf[4] |= 0x07;
- else if (symbol_rate <= (clk * 3) / 32)
- buf[4] |= 0x06;
- else if (symbol_rate <= clk / 8)
- buf[4] |= 0x05;
- else if (symbol_rate <= (clk * 3) / 16)
- buf[4] |= 0x04;
- else if (symbol_rate <= clk / 4)
- buf[4] |= 0x03;
- else if (symbol_rate <= (clk * 3) / 8)
- buf[4] |= 0x02;
- else if (symbol_rate <= clk / 2)
- buf[4] |= 0x01;
- else
- buf[4] |= 0x00;
-
- /* Sigma Delta converter */
- buf[5] = 0x00;
-
- /* FEC: Possible puncturing rates */
- if (fec_inner == FEC_NONE)
- buf[6] = 0x00;
- else if ((fec_inner >= FEC_1_2) && (fec_inner <= FEC_8_9))
- buf[6] = (1 << (8 - fec_inner));
- else if (fec_inner == FEC_AUTO)
- buf[6] = 0xff;
- else
- return -EINVAL;
-
- /* carrier lock detector threshold value */
- buf[7] = 0x30;
- /* AFC1: proportional part settings */
- buf[8] = 0x42;
- /* AFC1: integral part settings */
- buf[9] = 0x98;
- /* PD: Leaky integrator SCPC mode */
- buf[10] = 0x28;
- /* AFC2, AFC1 controls */
- buf[11] = 0x30;
- /* PD: proportional part settings */
- buf[12] = 0x42;
- /* PD: integral part settings */
- buf[13] = 0x99;
- /* AGC */
- buf[14] = 0x50 | scd;
-
- printk("symbol_rate=%u clk=%u\n", symbol_rate, clk);
-
- return tda80xx_write(state, 0x01, buf, sizeof(buf));
-}
-
-static int tda80xx_set_clk(struct tda80xx_state* state)
-{
- u8 buf[2];
-
- /* CLK proportional part */
- buf[0] = (0x06 << 5) | 0x08; /* CMP[2:0], CSP[4:0] */
- /* CLK integral part */
- buf[1] = (0x04 << 5) | 0x1a; /* CMI[2:0], CSI[4:0] */
-
- return tda80xx_write(state, 0x17, buf, sizeof(buf));
-}
-
-#if 0
-static int tda80xx_set_scpc_freq_offset(struct tda80xx_state* state)
-{
- /* a constant value is nonsense here imho */
- return tda80xx_writereg(state, 0x22, 0xf9);
-}
-#endif
-
-static int tda80xx_close_loop(struct tda80xx_state* state)
-{
- u8 buf[2];
-
- /* PD: Loop closed, LD: lock detect enable, SCPC: Sweep mode - AFC1 loop closed */
- buf[0] = 0x68;
- /* AFC1: Loop closed, CAR Feedback: 8192 */
- buf[1] = 0x70;
-
- return tda80xx_write(state, 0x0b, buf, sizeof(buf));
-}
-
-static irqreturn_t tda80xx_irq(int irq, void *priv, struct pt_regs *pt)
-{
- schedule_work(priv);
-
- return IRQ_HANDLED;
-}
-
-static void tda80xx_read_status_int(struct tda80xx_state* state)
-{
- u8 val;
-
- static const fe_spectral_inversion_t inv_tab[] = {
- INVERSION_OFF, INVERSION_ON
- };
-
- static const fe_code_rate_t fec_tab[] = {
- FEC_8_9, FEC_1_2, FEC_2_3, FEC_3_4,
- FEC_4_5, FEC_5_6, FEC_6_7, FEC_7_8,
- };
-
- val = tda80xx_readreg(state, 0x02);
-
- state->status = 0;
-
- if (val & 0x01) /* demodulator lock */
- state->status |= FE_HAS_SIGNAL;
- if (val & 0x02) /* clock recovery lock */
- state->status |= FE_HAS_CARRIER;
- if (val & 0x04) /* viterbi lock */
- state->status |= FE_HAS_VITERBI;
- if (val & 0x08) /* deinterleaver lock (packet sync) */
- state->status |= FE_HAS_SYNC;
- if (val & 0x10) /* derandomizer lock (frame sync) */
- state->status |= FE_HAS_LOCK;
- if (val & 0x20) /* frontend can not lock */
- state->status |= FE_TIMEDOUT;
-
- if ((state->status & (FE_HAS_CARRIER)) && (state->afc_loop)) {
- printk("tda80xx: closing loop\n");
- tda80xx_close_loop(state);
- state->afc_loop = 0;
- }
-
- if (state->status & (FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK)) {
- val = tda80xx_readreg(state, 0x0e);
- state->code_rate = fec_tab[val & 0x07];
- if (state->status & (FE_HAS_SYNC | FE_HAS_LOCK))
- state->spectral_inversion = inv_tab[(val >> 7) & 0x01];
- else
- state->spectral_inversion = INVERSION_AUTO;
- }
- else {
- state->code_rate = FEC_AUTO;
- }
-}
-
-static void tda80xx_worklet(void *priv)
-{
- struct tda80xx_state *state = priv;
-
- tda80xx_writereg(state, 0x00, 0x04);
- enable_irq(state->config->irq);
-
- tda80xx_read_status_int(state);
-}
-
-static void tda80xx_wait_diseqc_fifo(struct tda80xx_state* state)
-{
- size_t i;
-
- for (i = 0; i < 100; i++) {
- if (tda80xx_readreg(state, 0x02) & 0x80)
- break;
- msleep(10);
- }
-}
-
-static int tda8044_init(struct dvb_frontend* fe)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
- int ret;
-
- /*
- * this function is a mess...
- */
-
- if ((ret = tda80xx_write(state, 0x00, tda8044_inittab_pre, sizeof(tda8044_inittab_pre))))
- return ret;
-
- tda80xx_writereg(state, 0x0f, 0x50);
-#if 1
- tda80xx_writereg(state, 0x20, 0x8F); /* FIXME */
- tda80xx_writereg(state, 0x20, state->config->volt18setting); /* FIXME */
- //tda80xx_writereg(state, 0x00, 0x04);
- tda80xx_writereg(state, 0x00, 0x0C);
-#endif
- //tda80xx_writereg(state, 0x00, 0x08); /* Reset AFC1 loop filter */
-
- tda80xx_write(state, 0x00, tda8044_inittab_post, sizeof(tda8044_inittab_post));
-
- if (state->config->pll_init) {
- tda80xx_writereg(state, 0x1c, 0x80);
- state->config->pll_init(fe);
- tda80xx_writereg(state, 0x1c, 0x00);
- }
-
- return 0;
-}
-
-static int tda8083_init(struct dvb_frontend* fe)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
-
- tda80xx_write(state, 0x00, tda8083_inittab, sizeof(tda8083_inittab));
-
- if (state->config->pll_init) {
- tda80xx_writereg(state, 0x1c, 0x80);
- state->config->pll_init(fe);
- tda80xx_writereg(state, 0x1c, 0x00);
- }
-
- return 0;
-}
-
-static int tda80xx_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
-
- switch (voltage) {
- case SEC_VOLTAGE_13:
- return tda80xx_writereg(state, 0x20, state->config->volt13setting);
- case SEC_VOLTAGE_18:
- return tda80xx_writereg(state, 0x20, state->config->volt18setting);
- case SEC_VOLTAGE_OFF:
- return tda80xx_writereg(state, 0x20, 0);
- default:
- return -EINVAL;
- }
-}
-
-static int tda80xx_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
-
- switch (tone) {
- case SEC_TONE_OFF:
- return tda80xx_writereg(state, 0x29, 0x00);
- case SEC_TONE_ON:
- return tda80xx_writereg(state, 0x29, 0x80);
- default:
- return -EINVAL;
- }
-}
-
-static int tda80xx_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
-
- if (cmd->msg_len > 6)
- return -EINVAL;
-
- tda80xx_writereg(state, 0x29, 0x08 | (cmd->msg_len - 3));
- tda80xx_write(state, 0x23, cmd->msg, cmd->msg_len);
- tda80xx_writereg(state, 0x29, 0x0c | (cmd->msg_len - 3));
- tda80xx_wait_diseqc_fifo(state);
-
- return 0;
-}
-
-static int tda80xx_send_diseqc_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t cmd)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
-
- switch (cmd) {
- case SEC_MINI_A:
- tda80xx_writereg(state, 0x29, 0x14);
- break;
- case SEC_MINI_B:
- tda80xx_writereg(state, 0x29, 0x1c);
- break;
- default:
- return -EINVAL;
- }
-
- tda80xx_wait_diseqc_fifo(state);
-
- return 0;
-}
-
-static int tda80xx_sleep(struct dvb_frontend* fe)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
-
- tda80xx_writereg(state, 0x00, 0x02); /* enter standby */
-
- return 0;
-}
-
-static int tda80xx_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
-
- tda80xx_writereg(state, 0x1c, 0x80);
- state->config->pll_set(fe, p);
- tda80xx_writereg(state, 0x1c, 0x00);
-
- tda80xx_set_parameters(state, p->inversion, p->u.qpsk.symbol_rate, p->u.qpsk.fec_inner);
- tda80xx_set_clk(state);
- //tda80xx_set_scpc_freq_offset(state);
- state->afc_loop = 1;
-
- return 0;
-}
-
-static int tda80xx_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
-
- if (!state->config->irq)
- tda80xx_read_status_int(state);
-
- p->inversion = state->spectral_inversion;
- p->u.qpsk.fec_inner = state->code_rate;
-
- return 0;
-}
-
-static int tda80xx_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
-
- if (!state->config->irq)
- tda80xx_read_status_int(state);
- *status = state->status;
-
- return 0;
-}
-
-static int tda80xx_read_ber(struct dvb_frontend* fe, u32* ber)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
- int ret;
- u8 buf[3];
-
- if ((ret = tda80xx_read(state, 0x0b, buf, sizeof(buf))))
- return ret;
-
- *ber = ((buf[0] & 0x1f) << 16) | (buf[1] << 8) | buf[2];
-
- return 0;
-}
-
-static int tda80xx_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
-
- u8 gain = ~tda80xx_readreg(state, 0x01);
- *strength = (gain << 8) | gain;
-
- return 0;
-}
-
-static int tda80xx_read_snr(struct dvb_frontend* fe, u16* snr)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
-
- u8 quality = tda80xx_readreg(state, 0x08);
- *snr = (quality << 8) | quality;
-
- return 0;
-}
-
-static int tda80xx_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
-
- *ucblocks = tda80xx_readreg(state, 0x0f);
- if (*ucblocks == 0xff)
- *ucblocks = 0xffffffff;
-
- return 0;
-}
-
-static int tda80xx_init(struct dvb_frontend* fe)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
-
- switch(state->id) {
- case ID_TDA8044:
- return tda8044_init(fe);
-
- case ID_TDA8083:
- return tda8083_init(fe);
- }
- return 0;
-}
-
-static void tda80xx_release(struct dvb_frontend* fe)
-{
- struct tda80xx_state* state = fe->demodulator_priv;
-
- if (state->config->irq)
- free_irq(state->config->irq, &state->worklet);
-
- kfree(state);
-}
-
-static struct dvb_frontend_ops tda80xx_ops;
-
-struct dvb_frontend* tda80xx_attach(const struct tda80xx_config* config,
- struct i2c_adapter* i2c)
-{
- struct tda80xx_state* state = NULL;
- int ret;
-
- /* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda80xx_state), GFP_KERNEL);
- if (state == NULL) goto error;
-
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- memcpy(&state->ops, &tda80xx_ops, sizeof(struct dvb_frontend_ops));
- state->spectral_inversion = INVERSION_AUTO;
- state->code_rate = FEC_AUTO;
- state->status = 0;
- state->afc_loop = 0;
-
- /* check if the demod is there */
- if (tda80xx_writereg(state, 0x89, 0x00) < 0) goto error;
- state->id = tda80xx_readreg(state, 0x00);
-
- switch (state->id) {
- case ID_TDA8044:
- state->clk = 96000000;
- printk("tda80xx: Detected tda8044\n");
- break;
-
- case ID_TDA8083:
- state->clk = 64000000;
- printk("tda80xx: Detected tda8083\n");
- break;
-
- default:
- goto error;
- }
-
- /* setup IRQ */
- if (state->config->irq) {
- INIT_WORK(&state->worklet, tda80xx_worklet, state);
- if ((ret = request_irq(state->config->irq, tda80xx_irq, SA_ONESHOT, "tda80xx", &state->worklet)) < 0) {
- printk(KERN_ERR "tda80xx: request_irq failed (%d)\n", ret);
- goto error;
- }
- }
-
- /* create dvb_frontend */
- state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- kfree(state);
- return NULL;
-}
-
-static struct dvb_frontend_ops tda80xx_ops = {
-
- .info = {
- .name = "Philips TDA80xx DVB-S",
- .type = FE_QPSK,
- .frequency_min = 500000,
- .frequency_max = 2700000,
- .frequency_stepsize = 125,
- .symbol_rate_min = 4500000,
- .symbol_rate_max = 45000000,
- .caps = FE_CAN_INVERSION_AUTO |
- FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
- FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
- FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
- FE_CAN_QPSK |
- FE_CAN_MUTE_TS
- },
-
- .release = tda80xx_release,
-
- .init = tda80xx_init,
- .sleep = tda80xx_sleep,
-
- .set_frontend = tda80xx_set_frontend,
- .get_frontend = tda80xx_get_frontend,
-
- .read_status = tda80xx_read_status,
- .read_ber = tda80xx_read_ber,
- .read_signal_strength = tda80xx_read_signal_strength,
- .read_snr = tda80xx_read_snr,
- .read_ucblocks = tda80xx_read_ucblocks,
-
- .diseqc_send_master_cmd = tda80xx_send_diseqc_msg,
- .diseqc_send_burst = tda80xx_send_diseqc_burst,
- .set_tone = tda80xx_set_tone,
- .set_voltage = tda80xx_set_voltage,
-};
-
-module_param(debug, int, 0644);
-
-MODULE_DESCRIPTION("Philips TDA8044 / TDA8083 DVB-S Demodulator driver");
-MODULE_AUTHOR("Felix Domke, Andreas Oberritter");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(tda80xx_attach);
diff --git a/drivers/media/dvb/frontends/tda80xx.h b/drivers/media/dvb/frontends/tda80xx.h
deleted file mode 100644
index cd639a0..0000000
--- a/drivers/media/dvb/frontends/tda80xx.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * tda80xx.c
- *
- * Philips TDA8044 / TDA8083 QPSK demodulator driver
- *
- * Copyright (C) 2001 Felix Domke <tmbinc@elitedvb.net>
- * Copyright (C) 2002-2004 Andreas Oberritter <obi@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef TDA80XX_H
-#define TDA80XX_H
-
-#include <linux/dvb/frontend.h>
-
-struct tda80xx_config
-{
- /* the demodulator's i2c address */
- u8 demod_address;
-
- /* IRQ to use (0=>no IRQ used) */
- u32 irq;
-
- /* Register setting to use for 13v */
- u8 volt13setting;
-
- /* Register setting to use for 18v */
- u8 volt18setting;
-
- /* PLL maintenance */
- int (*pll_init)(struct dvb_frontend* fe);
- int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
-};
-
-extern struct dvb_frontend* tda80xx_attach(const struct tda80xx_config* config,
- struct i2c_adapter* i2c);
-
-#endif // TDA80XX_H
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 2749490..d36369e 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -2329,6 +2329,17 @@
av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
break;
+ case 0x0004: // Galaxis DVB-S rev1.3
+ /* ALPS BSRV2 */
+ av7110->fe = ves1x93_attach(&alps_bsrv2_config, &av7110->i2c_adap);
+ if (av7110->fe) {
+ av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
+ av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst;
+ av7110->fe->ops->set_tone = av7110_set_tone;
+ av7110->recover = dvb_s_recover;
+ }
+ break;
+
case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */
/* Grundig 29504-451 */
av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);
@@ -2930,6 +2941,7 @@
MAKE_AV7110_INFO(ttt, "Technotrend/Hauppauge DVB-T");
MAKE_AV7110_INFO(fsc, "Fujitsu Siemens DVB-C");
MAKE_AV7110_INFO(fss, "Fujitsu Siemens DVB-S rev1.6");
+MAKE_AV7110_INFO(gxs_1_3, "Galaxis DVB-S rev1.3");
static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(fsc, 0x110a, 0x0000),
@@ -2937,13 +2949,13 @@
MAKE_EXTENSION_PCI(ttt_1_X, 0x13c2, 0x0001),
MAKE_EXTENSION_PCI(ttc_2_X, 0x13c2, 0x0002),
MAKE_EXTENSION_PCI(tts_2_X, 0x13c2, 0x0003),
+ MAKE_EXTENSION_PCI(gxs_1_3, 0x13c2, 0x0004),
MAKE_EXTENSION_PCI(fss, 0x13c2, 0x0006),
MAKE_EXTENSION_PCI(ttt, 0x13c2, 0x0008),
MAKE_EXTENSION_PCI(ttc_1_X, 0x13c2, 0x000a),
MAKE_EXTENSION_PCI(tts_2_3, 0x13c2, 0x000e),
MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002),
-/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0004), UNDEFINED CARD */ // Galaxis DVB PC-Sat-Carte
/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0005), UNDEFINED CARD */ // Technisat SkyStar1
/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0009), UNDEFINED CARD */ // TT/Hauppauge WinTV Nexus-CA v????
diff --git a/drivers/media/dvb/ttpci/av7110.h b/drivers/media/dvb/ttpci/av7110.h
index 6ea30df..fafd25f 100644
--- a/drivers/media/dvb/ttpci/av7110.h
+++ b/drivers/media/dvb/ttpci/av7110.h
@@ -273,8 +273,6 @@
extern int ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid,
u16 subpid, u16 pcrpid);
-extern int av7110_setup_irc_config (struct av7110 *av7110, u32 ir_config);
-
extern int av7110_ir_init(struct av7110 *av7110);
extern void av7110_ir_exit(struct av7110 *av7110);
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
index 9138132..617e4f6 100644
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ b/drivers/media/dvb/ttpci/av7110_ir.c
@@ -155,6 +155,19 @@
}
+static int av7110_setup_irc_config(struct av7110 *av7110, u32 ir_config)
+{
+ int ret = 0;
+
+ dprintk(4, "%p\n", av7110);
+ if (av7110) {
+ ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, SetIR, 1, ir_config);
+ av7110->ir_config = ir_config;
+ }
+ return ret;
+}
+
+
static int av7110_ir_write_proc(struct file *file, const char __user *buffer,
unsigned long count, void *data)
{
@@ -187,19 +200,6 @@
}
-int av7110_setup_irc_config(struct av7110 *av7110, u32 ir_config)
-{
- int ret = 0;
-
- dprintk(4, "%p\n", av7110);
- if (av7110) {
- ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, SetIR, 1, ir_config);
- av7110->ir_config = ir_config;
- }
- return ret;
-}
-
-
static void ir_handler(struct av7110 *av7110, u32 ircom)
{
dprintk(4, "ircommand = %08x\n", ircom);
diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bttv-driver.c
index aa4c4c5..578b200 100644
--- a/drivers/media/video/bttv-driver.c
+++ b/drivers/media/video/bttv-driver.c
@@ -214,7 +214,7 @@
we can capture, of the first and second field. */
.vbistart = { 7,320 },
},{
- .v4l2_id = V4L2_STD_NTSC_M,
+ .v4l2_id = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
.name = "NTSC",
.Fsc = 28636363,
.swidth = 768,
diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c
index 297c32a..840fe01 100644
--- a/drivers/media/video/compat_ioctl32.c
+++ b/drivers/media/video/compat_ioctl32.c
@@ -167,29 +167,32 @@
if (kp->clipcount > 2048)
return -EINVAL;
if (kp->clipcount) {
- struct v4l2_clip32 *uclips = compat_ptr(up->clips);
- struct v4l2_clip *kclips;
+ struct v4l2_clip32 __user *uclips;
+ struct v4l2_clip __user *kclips;
int n = kp->clipcount;
+ compat_caddr_t p;
+ if (get_user(p, &up->clips))
+ return -EFAULT;
+ uclips = compat_ptr(p);
kclips = compat_alloc_user_space(n * sizeof(struct v4l2_clip));
kp->clips = kclips;
while (--n >= 0) {
- if (!access_ok(VERIFY_READ, &uclips->c, sizeof(uclips->c)) ||
- copy_from_user(&kclips->c, &uclips->c, sizeof(uclips->c)))
+ if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c)))
return -EFAULT;
- kclips->next = n ? kclips + 1 : 0;
+ if (put_user(n ? kclips + 1 : NULL, &kclips->next))
+ return -EFAULT;
uclips += 1;
kclips += 1;
}
} else
- kp->clips = 0;
+ kp->clips = NULL;
return 0;
}
static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_window32)) ||
- copy_to_user(&up->w, &kp->w, sizeof(up->w)) ||
+ if (copy_to_user(&up->w, &kp->w, sizeof(up->w)) ||
put_user(kp->field, &up->field) ||
put_user(kp->chromakey, &up->chromakey) ||
put_user(kp->clipcount, &up->clipcount))
@@ -199,33 +202,29 @@
static inline int get_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pix_format __user *up)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_pix_format)) ||
- copy_from_user(kp, up, sizeof(struct v4l2_pix_format)))
- return -EFAULT;
+ if (copy_from_user(kp, up, sizeof(struct v4l2_pix_format)))
+ return -EFAULT;
return 0;
}
static inline int put_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pix_format __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_pix_format)) ||
- copy_to_user(up, kp, sizeof(struct v4l2_pix_format)))
- return -EFAULT;
+ if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format)))
+ return -EFAULT;
return 0;
}
static inline int get_v4l2_vbi_format(struct v4l2_vbi_format *kp, struct v4l2_vbi_format __user *up)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_vbi_format)) ||
- copy_from_user(kp, up, sizeof(struct v4l2_vbi_format)))
- return -EFAULT;
+ if (copy_from_user(kp, up, sizeof(struct v4l2_vbi_format)))
+ return -EFAULT;
return 0;
}
static inline int put_v4l2_vbi_format(struct v4l2_vbi_format *kp, struct v4l2_vbi_format __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_vbi_format)) ||
- copy_to_user(up, kp, sizeof(struct v4l2_vbi_format)))
- return -EFAULT;
+ if (copy_to_user(up, kp, sizeof(struct v4l2_vbi_format)))
+ return -EFAULT;
return 0;
}
@@ -279,18 +278,16 @@
static inline int get_v4l2_standard(struct v4l2_standard *kp, struct v4l2_standard __user *up)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_standard)) ||
- copy_from_user(kp, up, sizeof(struct v4l2_standard)))
- return -EFAULT;
+ if (copy_from_user(kp, up, sizeof(struct v4l2_standard)))
+ return -EFAULT;
return 0;
}
static inline int put_v4l2_standard(struct v4l2_standard *kp, struct v4l2_standard __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_standard)) ||
- copy_to_user(up, kp, sizeof(struct v4l2_standard)))
- return -EFAULT;
+ if (copy_to_user(up, kp, sizeof(struct v4l2_standard)))
+ return -EFAULT;
return 0;
}
@@ -328,18 +325,16 @@
static inline int get_v4l2_tuner(struct v4l2_tuner *kp, struct v4l2_tuner __user *up)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_tuner)) ||
- copy_from_user(kp, up, sizeof(struct v4l2_tuner)))
- return -EFAULT;
+ if (copy_from_user(kp, up, sizeof(struct v4l2_tuner)))
+ return -EFAULT;
return 0;
}
static inline int put_v4l2_tuner(struct v4l2_tuner *kp, struct v4l2_tuner __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_tuner)) ||
- copy_to_user(up, kp, sizeof(struct v4l2_tuner)))
- return -EFAULT;
+ if (copy_to_user(up, kp, sizeof(struct v4l2_tuner)))
+ return -EFAULT;
return 0;
}
@@ -380,11 +375,13 @@
break;
case V4L2_MEMORY_USERPTR:
{
- unsigned long tmp = (unsigned long)compat_ptr(up->m.userptr);
+ compat_long_t tmp;
- if(get_user(kp->length, &up->length) ||
- get_user(kp->m.userptr, &tmp))
- return -EFAULT;
+ if (get_user(kp->length, &up->length) ||
+ get_user(tmp, &up->m.userptr))
+ return -EFAULT;
+
+ kp->m.userptr = (unsigned long)compat_ptr(tmp);
}
break;
case V4L2_MEMORY_OVERLAY:
@@ -468,33 +465,29 @@
static inline int get_v4l2_input32(struct v4l2_input *kp, struct v4l2_input __user *up)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_input) - 4) ||
- copy_from_user(kp, up, sizeof(struct v4l2_input) - 4))
- return -EFAULT;
+ if (copy_from_user(kp, up, sizeof(struct v4l2_input) - 4))
+ return -EFAULT;
return 0;
}
static inline int put_v4l2_input32(struct v4l2_input *kp, struct v4l2_input __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_input) - 4) ||
- copy_to_user(up, kp, sizeof(struct v4l2_input) - 4))
- return -EFAULT;
+ if (copy_to_user(up, kp, sizeof(struct v4l2_input) - 4))
+ return -EFAULT;
return 0;
}
static inline int get_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user *up)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_input)) ||
- copy_from_user(kp, up, sizeof(struct v4l2_input)))
- return -EFAULT;
+ if (copy_from_user(kp, up, sizeof(struct v4l2_input)))
+ return -EFAULT;
return 0;
}
static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_input)) ||
- copy_to_user(up, kp, sizeof(struct v4l2_input)))
- return -EFAULT;
+ if (copy_to_user(up, kp, sizeof(struct v4l2_input)))
+ return -EFAULT;
return 0;
}
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index c66c2c1..08ffd1f 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -220,33 +220,23 @@
cx25840_write(client, 0x808, 0xff);
cx25840_write(client, 0x80b, 0x10);
} else if (std & V4L2_STD_NTSC) {
- /* NTSC */
- if (state->pvr150_workaround) {
- /* Certain Hauppauge PVR150 models have a hardware bug
- that causes audio to drop out. For these models the
- audio standard must be set explicitly.
- To be precise: it affects cards with tuner models
- 85, 99 and 112 (model numbers from tveeprom). */
- if (std == V4L2_STD_NTSC_M_JP) {
- /* Japan uses EIAJ audio standard */
- cx25840_write(client, 0x808, 0x2f);
- } else {
- /* Others use the BTSC audio standard */
- cx25840_write(client, 0x808, 0x1f);
- }
- /* South Korea uses the A2-M (aka Zweiton M) audio
- standard, and should set 0x808 to 0x3f, but I don't
- know how to detect this. */
- } else if (std == V4L2_STD_NTSC_M_JP) {
+ /* Certain Hauppauge PVR150 models have a hardware bug
+ that causes audio to drop out. For these models the
+ audio standard must be set explicitly.
+ To be precise: it affects cards with tuner models
+ 85, 99 and 112 (model numbers from tveeprom). */
+ int hw_fix = state->pvr150_workaround;
+
+ if (std == V4L2_STD_NTSC_M_JP) {
/* Japan uses EIAJ audio standard */
- cx25840_write(client, 0x808, 0xf7);
+ cx25840_write(client, 0x808, hw_fix ? 0x2f : 0xf7);
+ } else if (std == V4L2_STD_NTSC_M_KR) {
+ /* South Korea uses A2 audio standard */
+ cx25840_write(client, 0x808, hw_fix ? 0x3f : 0xf8);
} else {
/* Others use the BTSC audio standard */
- cx25840_write(client, 0x808, 0xf6);
+ cx25840_write(client, 0x808, hw_fix ? 0x1f : 0xf6);
}
- /* South Korea uses the A2-M (aka Zweiton M) audio standard,
- and should set 0x808 to 0xf8, but I don't know how to
- detect this. */
cx25840_write(client, 0x80b, 0x00);
}
@@ -330,17 +320,17 @@
u8 fmt=0; /* zero is autodetect */
/* First tests should be against specific std */
- if (std & V4L2_STD_NTSC_M_JP) {
+ if (std == V4L2_STD_NTSC_M_JP) {
fmt=0x2;
- } else if (std & V4L2_STD_NTSC_443) {
+ } else if (std == V4L2_STD_NTSC_443) {
fmt=0x3;
- } else if (std & V4L2_STD_PAL_M) {
+ } else if (std == V4L2_STD_PAL_M) {
fmt=0x5;
- } else if (std & V4L2_STD_PAL_N) {
+ } else if (std == V4L2_STD_PAL_N) {
fmt=0x6;
- } else if (std & V4L2_STD_PAL_Nc) {
+ } else if (std == V4L2_STD_PAL_Nc) {
fmt=0x7;
- } else if (std & V4L2_STD_PAL_60) {
+ } else if (std == V4L2_STD_PAL_60) {
fmt=0x8;
} else {
/* Then, test against generic ones */
@@ -369,7 +359,7 @@
}
switch (fmt) {
- case 0x1: return V4L2_STD_NTSC_M;
+ case 0x1: return V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR;
case 0x2: return V4L2_STD_NTSC_M_JP;
case 0x3: return V4L2_STD_NTSC_443;
case 0x4: return V4L2_STD_PAL;
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 5330891..e99dfbb 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -32,6 +32,7 @@
config VIDEO_CX88_ALSA
tristate "ALSA DMA audio support"
depends on VIDEO_CX88 && SND && EXPERIMENTAL
+ select SND_PCM
---help---
This is a video4linux driver for direct (DMA) audio on
Conexant 2388x based TV cards.
@@ -48,6 +49,7 @@
default y
depends on VIDEO_CX88_DVB
select DVB_MT352
+ select VIDEO_CX88_VP3054
select DVB_OR51132
select DVB_CX22702
select DVB_LGDT330X
@@ -69,6 +71,16 @@
This adds DVB-T support for cards based on the
Connexant 2388x chip and the MT352 demodulator.
+config VIDEO_CX88_VP3054
+ tristate "VP-3054 Secondary I2C Bus Support"
+ default m
+ depends on DVB_MT352
+ ---help---
+ This adds DVB-T support for cards based on the
+ Connexant 2388x chip and the MT352 demodulator,
+ which also require support for the VP-3054
+ Secondary I2C bus, such at DNTV Live! DVB-T Pro.
+
config VIDEO_CX88_DVB_OR51132
bool "OR51132 ATSC Support"
default y
diff --git a/drivers/media/video/cx88/Makefile b/drivers/media/video/cx88/Makefile
index 6e5eaa2..2b90278 100644
--- a/drivers/media/video/cx88/Makefile
+++ b/drivers/media/video/cx88/Makefile
@@ -4,8 +4,9 @@
cx8802-objs := cx88-mpeg.o
obj-$(CONFIG_VIDEO_CX88) += cx88xx.o cx8800.o cx8802.o cx88-blackbird.o
-obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb.o cx88-vp3054-i2c.o
+obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb.o
obj-$(CONFIG_VIDEO_CX88_ALSA) += cx88-alsa.o
+obj-$(CONFIG_VIDEO_CX88_VP3054) += cx88-vp3054-i2c.o
EXTRA_CFLAGS += -I$(src)/..
EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
@@ -18,6 +19,6 @@
extra-cflags-$(CONFIG_DVB_MT352) += -DHAVE_MT352=1
extra-cflags-$(CONFIG_DVB_NXT200X) += -DHAVE_NXT200X=1
extra-cflags-$(CONFIG_DVB_CX24123) += -DHAVE_CX24123=1
-extra-cflags-$(CONFIG_VIDEO_CX88_DVB)+= -DHAVE_VP3054_I2C=1
+extra-cflags-$(CONFIG_VIDEO_CX88_VP3054)+= -DHAVE_VP3054_I2C=1
EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index a2e36a1..2acccd6 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -128,7 +128,7 @@
* BOARD Specific: Sets audio DMA
*/
-int _cx88_start_audio_dma(snd_cx88_card_t *chip)
+static int _cx88_start_audio_dma(snd_cx88_card_t *chip)
{
struct cx88_buffer *buf = chip->buf;
struct cx88_core *core=chip->core;
@@ -173,7 +173,7 @@
/*
* BOARD Specific: Resets audio DMA
*/
-int _cx88_stop_audio_dma(snd_cx88_card_t *chip)
+static int _cx88_stop_audio_dma(snd_cx88_card_t *chip)
{
struct cx88_core *core=chip->core;
dprintk(1, "Stopping audio DMA\n");
@@ -613,7 +613,7 @@
* Only boards with eeprom and byte 1 at eeprom=1 have it
*/
-struct pci_device_id cx88_audio_pci_tbl[] = {
+static struct pci_device_id cx88_audio_pci_tbl[] = {
{0x14f1,0x8801,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
{0x14f1,0x8811,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
{0, }
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index ad2f565..1bc9992 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1246,6 +1246,11 @@
.card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL,
},{
.subvendor = 0x18ac,
+ .subdevice = 0xdb54,
+ .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL,
+ /* Re-branded DViCO: DigitalNow DVB-T Dual */
+ },{
+ .subvendor = 0x18ac,
.subdevice = 0xdb11,
.card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS,
/* Re-branded DViCO: UltraView DVB-T Plus */
@@ -1293,6 +1298,7 @@
switch (tv.model)
{
case 28552: /* WinTV-PVR 'Roslyn' (No IR) */
+ case 34519: /* WinTV-PCI-FM */
case 90002: /* Nova-T-PCI (9002) */
case 92001: /* Nova-S-Plus (Video and IR) */
case 92002: /* Nova-S-Plus (Video and IR) */
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 8d6d6a6..3720f24 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -787,12 +787,14 @@
int cx88_start_audio_dma(struct cx88_core *core)
{
+ /* constant 128 made buzz in analog Nicam-stereo for bigger fifo_size */
+ int bpl = cx88_sram_channels[SRAM_CH25].fifo_size/4;
/* setup fifo + format */
- cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], 128, 0);
- cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], 128, 0);
+ cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], bpl, 0);
+ cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], bpl, 0);
- cx_write(MO_AUDD_LNGTH, 128); /* fifo bpl size */
- cx_write(MO_AUDR_LNGTH, 128); /* fifo bpl size */
+ cx_write(MO_AUDD_LNGTH, bpl); /* fifo bpl size */
+ cx_write(MO_AUDR_LNGTH, bpl); /* fifo bpl size */
/* start dma */
cx_write(MO_AUD_DMACNTRL, 0x0003); /* Up and Down fifo enable */
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index da2ad5c..165d948 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -482,6 +482,7 @@
switch (core->board) {
case CX88_BOARD_DNTV_LIVE_DVB_T:
case CX88_BOARD_KWORLD_DVB_T:
+ case CX88_BOARD_KWORLD_DVB_T_CX22702:
ir_codes = ir_codes_dntv_live_dvb_t;
ir->gpio_addr = MO_GP1_IO;
ir->mask_keycode = 0x1f;
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index dff3893..e5ee8bc 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -139,6 +139,9 @@
{
int ret, byte;
+ if (dev->state & DEV_DISCONNECTED)
+ return(-ENODEV);
+
em28xx_regdbg("req=%02x, reg=%02x ", req, reg);
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
@@ -165,6 +168,9 @@
u8 val;
int ret;
+ if (dev->state & DEV_DISCONNECTED)
+ return(-ENODEV);
+
em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
@@ -195,7 +201,12 @@
int ret;
/*usb_control_msg seems to expect a kmalloced buffer */
- unsigned char *bufs = kmalloc(len, GFP_KERNEL);
+ unsigned char *bufs;
+
+ if (dev->state & DEV_DISCONNECTED)
+ return(-ENODEV);
+
+ bufs = kmalloc(len, GFP_KERNEL);
em28xx_regdbg("req=%02x reg=%02x:", req, reg);
@@ -212,7 +223,7 @@
ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, reg, bufs, len, HZ);
- mdelay(5); /* FIXME: magic number */
+ msleep(5); /* FIXME: magic number */
kfree(bufs);
return ret;
}
@@ -253,7 +264,7 @@
if ((ret = em28xx_read_reg(dev, AC97BUSY_REG)) < 0)
return ret;
else if (((u8) ret) & 0x01) {
- em28xx_warn ("AC97 command still being exectuted: not handled properly!\n");
+ em28xx_warn ("AC97 command still being executed: not handled properly!\n");
}
return 0;
}
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 0591a70..6ca8631 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -78,7 +78,7 @@
ret = dev->em28xx_read_reg(dev, 0x05);
if (ret == 0x80 + len - 1)
return len;
- mdelay(5);
+ msleep(5);
}
em28xx_warn("i2c write timed out\n");
return -EIO;
@@ -138,7 +138,7 @@
return -ENODEV;
else if (msg == 0x84)
return 0;
- mdelay(5);
+ msleep(5);
}
return -ENODEV;
}
@@ -278,9 +278,9 @@
msgs[i].buf,
msgs[i].len,
i == num - 1);
- if (rc < 0)
- goto err;
}
+ if (rc < 0)
+ goto err;
if (i2c_debug>=2)
printk("\n");
}
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index eea304f..94a14a2 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -6,6 +6,9 @@
Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Sascha Sommer <saschasommer@freenet.de>
+ Some parts based on SN9C10x PC Camera Controllers GPL driver made
+ by Luca Risolia <luca.risolia@studio.unibo.it>
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/media/video/hexium_orion.c b/drivers/media/video/hexium_orion.c
index 0b6c209..aad4a18 100644
--- a/drivers/media/video/hexium_orion.c
+++ b/drivers/media/video/hexium_orion.c
@@ -484,7 +484,7 @@
};
static struct saa7146_extension extension = {
- .name = "hexium HV-PCI6/Orion",
+ .name = "hexium HV-PCI6 Orion",
.flags = 0, // SAA7146_USE_I2C_IRQ,
.pci_tbl = &pci_tbl[0],
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index c64718a..5a35d3b 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -136,7 +136,7 @@
},
[SAA7134_BOARD_FLYVIDEO2000] = {
/* "TC Wan" <tcwan@cs.usm.my> */
- .name = "LifeView FlyVIDEO2000",
+ .name = "LifeView/Typhoon FlyVIDEO2000",
.audio_clock = 0x00200000,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.radio_type = UNSET,
@@ -1884,44 +1884,38 @@
.gpio = 0x000,
},
},
- [SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS] = {
- .name = "Typhoon DVB-T Duo Digital/Analog Cardbus",
+ [SAA7134_BOARD_FLYDVBT_DUO_CARDBUS] = {
+ .name = "LifeView/Typhoon FlyDVB-T Duo Cardbus",
.audio_clock = 0x00200000,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.mpeg = SAA7134_MPEG_DVB,
- /* .gpiomask = 0xe000, */
+ .gpiomask = 0x00200000,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
- /* .gpio = 0x0000, */
+ .gpio = 0x200000, /* GPIO21=High for TV input */
.tv = 1,
},{
- .name = name_comp1, /* Composite signal on S-Video input */
- .vmux = 0,
- .amux = LINE2,
- /* .gpio = 0x4000, */
- },{
- .name = name_comp2, /* Composite input */
- .vmux = 3,
- .amux = LINE2,
- /* .gpio = 0x4000, */
- },{
.name = name_svideo, /* S-Video signal on S-Video input */
.vmux = 8,
.amux = LINE2,
- /* .gpio = 0x4000, */
+ },{
+ .name = name_comp1, /* Composite signal on S-Video input */
+ .vmux = 0,
+ .amux = LINE2,
+ },{
+ .name = name_comp2, /* Composite input */
+ .vmux = 3,
+ .amux = LINE2,
}},
.radio = {
.name = name_radio,
- .amux = LINE2,
- },
- .mute = {
- .name = name_mute,
- .amux = LINE1,
+ .amux = TV,
+ .gpio = 0x000000, /* GPIO21=Low for FM radio antenna */
},
},
[SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII] = {
@@ -2701,6 +2695,12 @@
.driver_data = SAA7134_BOARD_FLYVIDEO2000,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7130,
+ .subvendor = 0x4e42, /* Typhoon */
+ .subdevice = 0x0138, /* LifeView FlyTV Prime30 OEM */
+ .driver_data = SAA7134_BOARD_FLYVIDEO2000,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x5168,
.subdevice = 0x0212, /* minipci, LR212 */
@@ -2935,7 +2935,7 @@
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x5168,
.subdevice = 0x0502, /* Cardbus version */
- .driver_data = SAA7134_BOARD_FLYDVBTDUO,
+ .driver_data = SAA7134_BOARD_FLYDVBT_DUO_CARDBUS,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
@@ -2980,12 +2980,12 @@
.subdevice = 0x1370, /* cardbus version */
.driver_data = SAA7134_BOARD_ADS_INSTANT_TV,
- },{ /* Typhoon DVB-T Duo Digital/Analog Cardbus */
+ },{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
- .subvendor = 0x4e42,
- .subdevice = 0x0502,
- .driver_data = SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS,
+ .subvendor = 0x4e42, /* Typhoon */
+ .subdevice = 0x0502, /* LifeView LR502 OEM */
+ .driver_data = SAA7134_BOARD_FLYDVBT_DUO_CARDBUS,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
@@ -3206,8 +3206,7 @@
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000004);
break;
- case SAA7134_BOARD_FLYDVBTDUO:
- case SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS:
+ case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
/* turn the fan on */
saa_writeb(SAA7134_GPIO_GPMODE3, 0x08);
saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x06);
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 399f995..1a536e86 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -861,7 +861,7 @@
dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
&dev->i2c_adap);
break;
- case SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS:
+ case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
&dev->i2c_adap);
break;
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index e70eae8..3261d8b 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -185,7 +185,7 @@
#define SAA7134_BOARD_AVERMEDIA_GO_007_FM 57
#define SAA7134_BOARD_ADS_INSTANT_TV 58
#define SAA7134_BOARD_KWORLD_VSTREAM_XPERT 59
-#define SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS 60
+#define SAA7134_BOARD_FLYDVBT_DUO_CARDBUS 60
#define SAA7134_BOARD_PHILIPS_TOUGH 61
#define SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII 62
#define SAA7134_BOARD_KWORLD_XPERT 63
diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c
index 54fc330..9d76926 100644
--- a/drivers/media/video/stradis.c
+++ b/drivers/media/video/stradis.c
@@ -2012,7 +2012,6 @@
{
struct saa7146 *saa = pci_get_drvdata(pdev);
- memset(saa, 0, sizeof(*saa));
saa->user = 0;
/* reset the saa7146 */
saawrite(0xffff0000, SAA7146_MC1);
@@ -2062,16 +2061,16 @@
}
if (saa->audbuf == NULL && (saa->audbuf = vmalloc(65536)) == NULL) {
dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
- goto errvid;
+ goto errfree;
}
if (saa->osdbuf == NULL && (saa->osdbuf = vmalloc(131072)) == NULL) {
dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
- goto erraud;
+ goto errfree;
}
/* allocate 81920 byte buffer for clipping */
if ((saa->dmavid2 = kzalloc(VIDEO_CLIPMAP_SIZE, GFP_KERNEL)) == NULL) {
dev_err(&pdev->dev, "%d: clip kmalloc failed\n", saa->nr);
- goto errosd;
+ goto errfree;
}
/* setup clipping registers */
saawrite(virt_to_bus(saa->dmavid2), SAA7146_BASE_EVEN2);
@@ -2085,15 +2084,11 @@
I2CBusScan(saa);
return 0;
-errosd:
+errfree:
vfree(saa->osdbuf);
- saa->osdbuf = NULL;
-erraud:
vfree(saa->audbuf);
- saa->audbuf = NULL;
-errvid:
vfree(saa->vidbuf);
- saa->vidbuf = NULL;
+ saa->audbuf = saa->osdbuf = saa->vidbuf = NULL;
err:
return -ENOMEM;
}
diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index 5815649..0d54f6c 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -231,7 +231,7 @@
cAudioIF_6_5 |
cVideoIF_38_90 ),
},{
- .std = V4L2_STD_NTSC_M,
+ .std = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
.name = "NTSC-M",
.b = ( cNegativeFmTV |
cQSS ),
@@ -619,6 +619,11 @@
tda9887_dbg("insmod fixup: NTSC => NTSC_M_JP\n");
t->std = V4L2_STD_NTSC_M_JP;
break;
+ case 'k':
+ case 'K':
+ tda9887_dbg("insmod fixup: NTSC => NTSC_M_KR\n");
+ t->std = V4L2_STD_NTSC_M_KR;
+ break;
case '-':
/* default parameter, do nothing */
break;
@@ -876,7 +881,7 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver driver = {
- .id = -1, /* FIXME */
+ .id = I2C_DRIVERID_TDA9887,
.attach_adapter = tda9887_probe,
.detach_client = tda9887_detach,
.command = tda9887_command,
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 2995b22..e7ee619 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -216,6 +216,7 @@
buffer[3] = 0xa4;
i2c_master_send(c,buffer,4);
default_tuner_init(c);
+ break;
default:
default_tuner_init(c);
break;
@@ -365,6 +366,11 @@
tuner_dbg("insmod fixup: NTSC => NTSC_M_JP\n");
t->std = V4L2_STD_NTSC_M_JP;
break;
+ case 'k':
+ case 'K':
+ tuner_dbg("insmod fixup: NTSC => NTSC_M_KR\n");
+ t->std = V4L2_STD_NTSC_M_KR;
+ break;
case '-':
/* default parameter, do nothing */
break;
@@ -448,7 +454,7 @@
printk("%02x ",buffer[i]);
printk("\n");
}
- /* TEA5767 autodetection code - only for addr = 0xc0 */
+ /* autodetection code based on the i2c addr */
if (!no_autodetect) {
switch (addr) {
case 0x42:
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index 6d03b9b0..c8e5ad0 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -390,6 +390,14 @@
chip_write(chip, TDA9840_SW, t);
}
+static int tda9840_checkit(struct CHIPSTATE *chip)
+{
+ int rc;
+ rc = chip_read(chip);
+ /* lower 5 bits should be 0 */
+ return ((rc & 0x1f) == 0) ? 1 : 0;
+}
+
/* ---------------------------------------------------------------------- */
/* audio chip descriptions - defines+functions for tda985x */
@@ -1264,6 +1272,7 @@
.addr_hi = I2C_TDA9840 >> 1,
.registers = 5,
+ .checkit = tda9840_checkit,
.getmode = tda9840_getmode,
.setmode = tda9840_setmode,
.checkmode = generic_checkmode,
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index fad9ea0..1864423 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -746,24 +746,27 @@
static inline void tvp5150_reset(struct i2c_client *c)
{
- u8 type, ver_656, msb_id, lsb_id, msb_rom, lsb_rom;
+ u8 msb_id, lsb_id, msb_rom, lsb_rom;
struct tvp5150 *decoder = i2c_get_clientdata(c);
- type=tvp5150_read(c,TVP5150_AUTOSW_MSK);
msb_id=tvp5150_read(c,TVP5150_MSB_DEV_ID);
lsb_id=tvp5150_read(c,TVP5150_LSB_DEV_ID);
msb_rom=tvp5150_read(c,TVP5150_ROM_MAJOR_VER);
lsb_rom=tvp5150_read(c,TVP5150_ROM_MINOR_VER);
- if (type==0xdc) {
- ver_656=tvp5150_read(c,TVP5150_REV_SELECT);
- tvp5150_info("tvp%02x%02xam1 detected 656 version is %d.\n",msb_id, lsb_id,ver_656);
- } else if (type==0xfc) {
- tvp5150_info("tvp%02x%02xa detected.\n",msb_id, lsb_id);
+ if ((msb_rom==4)&&(lsb_rom==0)) { /* Is TVP5150AM1 */
+ tvp5150_info("tvp%02x%02xam1 detected.\n",msb_id, lsb_id);
+
+ /* ITU-T BT.656.4 timing */
+ tvp5150_write(c,TVP5150_REV_SELECT,0);
} else {
- tvp5150_info("unknown tvp%02x%02x chip detected(%d).\n",msb_id,lsb_id,type);
+ if ((msb_rom==3)||(lsb_rom==0x21)) { /* Is TVP5150A */
+ tvp5150_info("tvp%02x%02xa detected.\n",msb_id, lsb_id);
+ } else {
+ tvp5150_info("*** unknown tvp%02x%02x chip detected.\n",msb_id,lsb_id);
+ tvp5150_info("*** Rom ver is %d.%d\n",msb_rom,lsb_rom);
+ }
}
- tvp5150_info("Rom ver is %d.%d\n",msb_rom,lsb_rom);
/* Initializes TVP5150 to its default values */
tvp5150_write_inittab(c, tvp5150_init_default);
@@ -893,6 +896,17 @@
}
case DECODER_GET_STATUS:
{
+ int *iarg = arg;
+ int status;
+ int res=0;
+ status = tvp5150_read(c, 0x88);
+ if(status&0x08){
+ res |= DECODER_STATUS_COLOR;
+ }
+ if(status&0x04 && status&0x02){
+ res |= DECODER_STATUS_GOOD;
+ }
+ *iarg=res;
break;
}
diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile
index 8a2e265..33ace37 100644
--- a/drivers/message/fusion/Makefile
+++ b/drivers/message/fusion/Makefile
@@ -29,6 +29,8 @@
# For mptctl:
#CFLAGS_mptctl.o += -DMPT_DEBUG_IOCTL
#
+# For mptfc:
+#CFLAGS_mptfc.o += -DMPT_DEBUG_FC
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index d890b2b..9a2c760 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -81,6 +81,10 @@
/*
* cmd line parameters
*/
+static int mpt_msi_enable;
+module_param(mpt_msi_enable, int, 0);
+MODULE_PARM_DESC(mpt_msi_enable, " MSI Support Enable (default=0)");
+
#ifdef MFCNT
static int mfcounter = 0;
#define PRINT_MF_COUNT 20000
@@ -174,7 +178,7 @@
static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers);
static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
-static void mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info);
+static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info);
/* module entry point */
@@ -313,7 +317,7 @@
if (ioc->bus_type == FC)
mpt_fc_log_info(ioc, log_info);
else if (ioc->bus_type == SPI)
- mpt_sp_log_info(ioc, log_info);
+ mpt_spi_log_info(ioc, log_info);
else if (ioc->bus_type == SAS)
mpt_sas_log_info(ioc, log_info);
}
@@ -1444,6 +1448,9 @@
ioc->pci_irq = -1;
if (pdev->irq) {
+ if (mpt_msi_enable && !pci_enable_msi(pdev))
+ printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", ioc->name);
+
r = request_irq(pdev->irq, mpt_interrupt, SA_SHIRQ, ioc->name, ioc);
if (r < 0) {
@@ -1483,6 +1490,10 @@
list_del(&ioc->list);
free_irq(ioc->pci_irq, ioc);
+ if (mpt_msi_enable)
+ pci_disable_msi(pdev);
+ if (ioc->alt_ioc)
+ ioc->alt_ioc->alt_ioc = NULL;
iounmap(mem);
kfree(ioc);
pci_set_drvdata(pdev, NULL);
@@ -2136,6 +2147,8 @@
if (ioc->pci_irq != -1) {
free_irq(ioc->pci_irq, ioc);
+ if (mpt_msi_enable)
+ pci_disable_msi(ioc->pcidev);
ioc->pci_irq = -1;
}
@@ -2157,6 +2170,10 @@
sz_last = ioc->alloc_total;
dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n",
ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
+
+ if (ioc->alt_ioc)
+ ioc->alt_ioc->alt_ioc = NULL;
+
kfree(ioc);
}
@@ -2770,13 +2787,16 @@
/* RAID FW may take a long time to enable
*/
- if ( (ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
- > MPI_FW_HEADER_PID_PROD_TARGET_SCSI ) {
- rc = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
- reply_sz, (u16*)&reply_buf, 300 /*seconds*/, sleepFlag);
+ if (((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
+ > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) ||
+ (ioc->bus_type == SAS)) {
+ rc = mpt_handshake_req_reply_wait(ioc, req_sz,
+ (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
+ 300 /*seconds*/, sleepFlag);
} else {
- rc = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
- reply_sz, (u16*)&reply_buf, 30 /*seconds*/, sleepFlag);
+ rc = mpt_handshake_req_reply_wait(ioc, req_sz,
+ (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
+ 30 /*seconds*/, sleepFlag);
}
return rc;
}
@@ -4387,6 +4407,138 @@
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+
+static void
+mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
+ MpiEventDataRaid_t * pRaidEventData)
+{
+ int volume;
+ int reason;
+ int disk;
+ int status;
+ int flags;
+ int state;
+
+ volume = pRaidEventData->VolumeID;
+ reason = pRaidEventData->ReasonCode;
+ disk = pRaidEventData->PhysDiskNum;
+ status = le32_to_cpu(pRaidEventData->SettingsStatus);
+ flags = (status >> 0) & 0xff;
+ state = (status >> 8) & 0xff;
+
+ if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
+ return;
+ }
+
+ if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
+ reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
+ (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
+ printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d\n",
+ ioc->name, disk);
+ } else {
+ printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
+ ioc->name, volume);
+ }
+
+ switch(reason) {
+ case MPI_EVENT_RAID_RC_VOLUME_CREATED:
+ printk(MYIOC_s_INFO_FMT " volume has been created\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_DELETED:
+
+ printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
+ ioc->name,
+ state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
+ ? "optimal"
+ : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
+ ? "degraded"
+ : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
+ ? "failed"
+ : "state unknown",
+ flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
+ ? ", enabled" : "",
+ flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
+ ? ", quiesced" : "",
+ flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
+ ? ", resync in progress" : "" );
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
+ printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
+ ioc->name, disk);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
+ ioc->name,
+ state == MPI_PHYSDISK0_STATUS_ONLINE
+ ? "online"
+ : state == MPI_PHYSDISK0_STATUS_MISSING
+ ? "missing"
+ : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
+ ? "not compatible"
+ : state == MPI_PHYSDISK0_STATUS_FAILED
+ ? "failed"
+ : state == MPI_PHYSDISK0_STATUS_INITIALIZING
+ ? "initializing"
+ : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
+ ? "offline requested"
+ : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
+ ? "failed requested"
+ : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
+ ? "offline"
+ : "state unknown",
+ flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
+ ? ", out of sync" : "",
+ flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
+ ? ", quiesced" : "" );
+ break;
+
+ case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
+ printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
+ ioc->name, disk);
+ break;
+
+ case MPI_EVENT_RAID_RC_SMART_DATA:
+ printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
+ ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
+ break;
+
+ case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
+ printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
+ ioc->name, disk);
+ break;
+ }
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* GetIoUnitPage2 - Retrieve BIOS version and boot order information.
* @ioc: Pointer to MPT_ADAPTER structure
@@ -4598,6 +4750,14 @@
SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
MpiDeviceInfo_t *pdevice = NULL;
+ /*
+ * Save "Set to Avoid SCSI Bus Resets" flag
+ */
+ ioc->spi_data.bus_reset =
+ (le32_to_cpu(pPP2->PortFlags) &
+ MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
+ 0 : 1 ;
+
/* Save the Port Page 2 data
* (reformat into a 32bit quantity)
*/
@@ -5967,6 +6127,10 @@
}
}
break;
+ case MPI_EVENT_INTEGRATED_RAID:
+ mptbase_raid_process_event_data(ioc,
+ (MpiEventDataRaid_t *)pEventReply->Data);
+ break;
default:
break;
}
@@ -6046,7 +6210,7 @@
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
- * mpt_sp_log_info - Log information returned from SCSI Parallel IOC.
+ * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @mr: Pointer to MPT reply frame
* @log_info: U32 LogInfo word from the IOC
@@ -6054,7 +6218,7 @@
* Refer to lsi/sp_log.h.
*/
static void
-mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info)
+mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
{
u32 info = log_info & 0x00FF0000;
char *desc = "unknown";
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 47053ac..ea2649e 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
#define COPYRIGHT "Copyright (c) 1999-2005 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.03.06"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.06"
+#define MPT_LINUX_VERSION_COMMON "3.03.07"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.07"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
@@ -123,7 +123,7 @@
#define MPT_MAX_FRAME_SIZE 128
#define MPT_DEFAULT_FRAME_SIZE 128
-#define MPT_REPLY_FRAME_SIZE 0x40 /* Must be a multiple of 8 */
+#define MPT_REPLY_FRAME_SIZE 0x50 /* Must be a multiple of 8 */
#define MPT_SG_REQ_128_SCALE 1
#define MPT_SG_REQ_96_SCALE 2
@@ -510,9 +510,10 @@
{
struct list_head list;
struct fc_rport *rport;
- VirtDevice *vdev;
+ struct scsi_target *starget;
FCDevicePage0_t pg0;
u8 flags;
+ u8 remap_needed;
};
/*
@@ -631,6 +632,7 @@
struct mutex sas_topology_mutex;
MPT_SAS_MGMT sas_mgmt;
int num_ports;
+ struct work_struct mptscsih_persistTask;
struct list_head fc_rports;
spinlock_t fc_rport_lock; /* list and ri flags */
@@ -803,6 +805,12 @@
#define dreplyprintk(x)
#endif
+#ifdef DMPT_DEBUG_FC
+#define dfcprintk(x) printk x
+#else
+#define dfcprintk(x)
+#endif
+
#ifdef MPT_DEBUG_TM
#define dtmprintk(x) printk x
#define DBG_DUMP_TM_REQUEST_FRAME(mfp) \
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index b102c76..c3a3499 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -93,10 +93,11 @@
static int mptfcTaskCtx = -1;
static int mptfcInternalCtx = -1; /* Used only for internal commands */
-int mptfc_slave_alloc(struct scsi_device *device);
+static int mptfc_target_alloc(struct scsi_target *starget);
+static int mptfc_slave_alloc(struct scsi_device *sdev);
static int mptfc_qcmd(struct scsi_cmnd *SCpnt,
- void (*done)(struct scsi_cmnd *));
-
+ void (*done)(struct scsi_cmnd *));
+static void mptfc_target_destroy(struct scsi_target *starget);
static void mptfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout);
static void __devexit mptfc_remove(struct pci_dev *pdev);
@@ -107,10 +108,10 @@
.name = "MPT FC Host",
.info = mptscsih_info,
.queuecommand = mptfc_qcmd,
- .target_alloc = mptscsih_target_alloc,
+ .target_alloc = mptfc_target_alloc,
.slave_alloc = mptfc_slave_alloc,
.slave_configure = mptscsih_slave_configure,
- .target_destroy = mptscsih_target_destroy,
+ .target_destroy = mptfc_target_destroy,
.slave_destroy = mptscsih_slave_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_abort_handler = mptscsih_abort,
@@ -348,14 +349,33 @@
}
static void
+mptfc_remap_sdev(struct scsi_device *sdev, void *arg)
+{
+ VirtDevice *vdev;
+ VirtTarget *vtarget;
+ struct scsi_target *starget;
+
+ starget = scsi_target(sdev);
+ if (starget->hostdata == arg) {
+ vtarget = arg;
+ vdev = sdev->hostdata;
+ if (vdev) {
+ vdev->bus_id = vtarget->bus_id;
+ vdev->target_id = vtarget->target_id;
+ }
+ }
+}
+
+static void
mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
{
struct fc_rport_identifiers rport_ids;
struct fc_rport *rport;
struct mptfc_rport_info *ri;
- int match = 0;
- u64 port_name;
+ int new_ri = 1;
+ u64 pn;
unsigned long flags;
+ VirtTarget *vtarget;
if (mptfc_generate_rport_ids(pg0, &rport_ids) < 0)
return;
@@ -363,14 +383,14 @@
/* scan list looking for a match */
spin_lock_irqsave(&ioc->fc_rport_lock, flags);
list_for_each_entry(ri, &ioc->fc_rports, list) {
- port_name = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low;
- if (port_name == rport_ids.port_name) { /* match */
+ pn = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low;
+ if (pn == rport_ids.port_name) { /* match */
list_move_tail(&ri->list, &ioc->fc_rports);
- match = 1;
+ new_ri = 0;
break;
}
}
- if (!match) { /* allocate one */
+ if (new_ri) { /* allocate one */
spin_unlock_irqrestore(&ioc->fc_rport_lock, flags);
ri = kzalloc(sizeof(struct mptfc_rport_info), GFP_KERNEL);
if (!ri)
@@ -382,40 +402,43 @@
ri->pg0 = *pg0; /* add/update pg0 data */
ri->flags &= ~MPT_RPORT_INFO_FLAGS_MISSING;
+ /* MPT_RPORT_INFO_FLAGS_REGISTERED - rport not previously deleted */
if (!(ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED)) {
ri->flags |= MPT_RPORT_INFO_FLAGS_REGISTERED;
spin_unlock_irqrestore(&ioc->fc_rport_lock, flags);
- rport = fc_remote_port_add(ioc->sh,channel, &rport_ids);
+ rport = fc_remote_port_add(ioc->sh, channel, &rport_ids);
spin_lock_irqsave(&ioc->fc_rport_lock, flags);
if (rport) {
- if (*((struct mptfc_rport_info **)rport->dd_data) != ri) {
- ri->flags &= ~MPT_RPORT_INFO_FLAGS_MAPPED_VDEV;
- ri->vdev = NULL;
- ri->rport = rport;
- *((struct mptfc_rport_info **)rport->dd_data) = ri;
- }
- rport->dev_loss_tmo = mptfc_dev_loss_tmo;
+ ri->rport = rport;
+ if (new_ri) /* may have been reset by user */
+ rport->dev_loss_tmo = mptfc_dev_loss_tmo;
+ *((struct mptfc_rport_info **)rport->dd_data) = ri;
/*
* if already mapped, remap here. If not mapped,
- * slave_alloc will allocate vdev and map
+ * target_alloc will allocate vtarget and map,
+ * slave_alloc will fill in vdev from vtarget.
*/
- if (ri->flags & MPT_RPORT_INFO_FLAGS_MAPPED_VDEV) {
- ri->vdev->target_id = ri->pg0.CurrentTargetID;
- ri->vdev->bus_id = ri->pg0.CurrentBus;
- ri->vdev->vtarget->target_id = ri->vdev->target_id;
- ri->vdev->vtarget->bus_id = ri->vdev->bus_id;
+ if (ri->starget) {
+ vtarget = ri->starget->hostdata;
+ if (vtarget) {
+ vtarget->target_id = pg0->CurrentTargetID;
+ vtarget->bus_id = pg0->CurrentBus;
+ starget_for_each_device(ri->starget,
+ vtarget,mptfc_remap_sdev);
+ }
+ ri->remap_needed = 0;
}
- #ifdef MPT_DEBUG
- printk ("mptfc_reg_dev.%d: %x, %llx / %llx, tid %d, "
+ dfcprintk ((MYIOC_s_INFO_FMT
+ "mptfc_reg_dev.%d: %x, %llx / %llx, tid %d, "
"rport tid %d, tmo %d\n",
- ioc->sh->host_no,
+ ioc->name,
+ oc->sh->host_no,
pg0->PortIdentifier,
pg0->WWNN,
pg0->WWPN,
pg0->CurrentTargetID,
ri->rport->scsi_target_id,
- ri->rport->dev_loss_tmo);
- #endif
+ ri->rport->dev_loss_tmo));
} else {
list_del(&ri->list);
kfree(ri);
@@ -427,6 +450,65 @@
}
/*
+ * OS entry point to allow for host driver to free allocated memory
+ * Called if no device present or device being unloaded
+ */
+static void
+mptfc_target_destroy(struct scsi_target *starget)
+{
+ struct fc_rport *rport;
+ struct mptfc_rport_info *ri;
+
+ rport = starget_to_rport(starget);
+ if (rport) {
+ ri = *((struct mptfc_rport_info **)rport->dd_data);
+ if (ri) /* better be! */
+ ri->starget = NULL;
+ }
+ if (starget->hostdata)
+ kfree(starget->hostdata);
+ starget->hostdata = NULL;
+}
+
+/*
+ * OS entry point to allow host driver to alloc memory
+ * for each scsi target. Called once per device the bus scan.
+ * Return non-zero if allocation fails.
+ */
+static int
+mptfc_target_alloc(struct scsi_target *starget)
+{
+ VirtTarget *vtarget;
+ struct fc_rport *rport;
+ struct mptfc_rport_info *ri;
+ int rc;
+
+ vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL);
+ if (!vtarget)
+ return -ENOMEM;
+ starget->hostdata = vtarget;
+
+ rc = -ENODEV;
+ rport = starget_to_rport(starget);
+ if (rport) {
+ ri = *((struct mptfc_rport_info **)rport->dd_data);
+ if (ri) { /* better be! */
+ vtarget->target_id = ri->pg0.CurrentTargetID;
+ vtarget->bus_id = ri->pg0.CurrentBus;
+ ri->starget = starget;
+ ri->remap_needed = 0;
+ rc = 0;
+ }
+ }
+ if (rc != 0) {
+ kfree(vtarget);
+ starget->hostdata = NULL;
+ }
+
+ return rc;
+}
+
+/*
* OS entry point to allow host driver to alloc memory
* for each scsi device. Called once per device the bus scan.
* Return non-zero if allocation fails.
@@ -440,7 +522,6 @@
VirtDevice *vdev;
struct scsi_target *starget;
struct fc_rport *rport;
- struct mptfc_rport_info *ri;
unsigned long flags;
@@ -451,55 +532,44 @@
hd = (MPT_SCSI_HOST *)sdev->host->hostdata;
- vdev = kmalloc(sizeof(VirtDevice), GFP_KERNEL);
+ vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
if (!vdev) {
printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
hd->ioc->name, sizeof(VirtDevice));
return -ENOMEM;
}
- memset(vdev, 0, sizeof(VirtDevice));
spin_lock_irqsave(&hd->ioc->fc_rport_lock,flags);
- if (!(ri = *((struct mptfc_rport_info **)rport->dd_data))) {
- spin_unlock_irqrestore(&hd->ioc->fc_rport_lock,flags);
- kfree(vdev);
- return -ENODEV;
- }
-
sdev->hostdata = vdev;
starget = scsi_target(sdev);
vtarget = starget->hostdata;
+
if (vtarget->num_luns == 0) {
+ vtarget->ioc_id = hd->ioc->id;
vtarget->tflags = MPT_TARGET_FLAGS_Q_YES |
MPT_TARGET_FLAGS_VALID_INQUIRY;
hd->Targets[sdev->id] = vtarget;
}
- vtarget->target_id = vdev->target_id;
- vtarget->bus_id = vdev->bus_id;
-
vdev->vtarget = vtarget;
vdev->ioc_id = hd->ioc->id;
vdev->lun = sdev->lun;
- vdev->target_id = ri->pg0.CurrentTargetID;
- vdev->bus_id = ri->pg0.CurrentBus;
-
- ri->flags |= MPT_RPORT_INFO_FLAGS_MAPPED_VDEV;
- ri->vdev = vdev;
+ vdev->target_id = vtarget->target_id;
+ vdev->bus_id = vtarget->bus_id;
spin_unlock_irqrestore(&hd->ioc->fc_rport_lock,flags);
vtarget->num_luns++;
-#ifdef MPT_DEBUG
- printk ("mptfc_slv_alloc.%d: num_luns %d, sdev.id %d, "
+ dfcprintk ((MYIOC_s_INFO_FMT
+ "mptfc_slv_alloc.%d: num_luns %d, sdev.id %d, "
"CurrentTargetID %d, %x %llx %llx\n",
- sdev->host->host_no,
- vtarget->num_luns,
- sdev->id, ri->pg0.CurrentTargetID,
- ri->pg0.PortIdentifier, ri->pg0.WWPN, ri->pg0.WWNN);
-#endif
+ ioc->name,
+ sdev->host->host_no,
+ vtarget->num_luns,
+ sdev->id, ri->pg0.CurrentTargetID,
+ ri->pg0.PortIdentifier, ri->pg0.WWPN, ri->pg0.WWNN));
return 0;
}
@@ -507,6 +577,7 @@
static int
mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
+ struct mptfc_rport_info *ri;
struct fc_rport *rport = starget_to_rport(scsi_target(SCpnt->device));
int err;
@@ -516,6 +587,10 @@
done(SCpnt);
return 0;
}
+ ri = *((struct mptfc_rport_info **)rport->dd_data);
+ if (unlikely(ri->remap_needed))
+ return SCSI_MLQUEUE_HOST_BUSY;
+
return mptscsih_qcmd(SCpnt,done);
}
@@ -591,16 +666,20 @@
ri->flags &= ~(MPT_RPORT_INFO_FLAGS_REGISTERED|
MPT_RPORT_INFO_FLAGS_MISSING);
+ ri->remap_needed = 1;
fc_remote_port_delete(ri->rport);
/*
* remote port not really deleted 'cause
* binding is by WWPN and driver only
- * registers FCP_TARGETs
+ * registers FCP_TARGETs but cannot trust
+ * data structures.
*/
- #ifdef MPT_DEBUG
- printk ("mptfc_rescan.%d: %llx deleted\n",
- ioc->sh->host_no, ri->pg0.WWPN);
- #endif
+ ri->rport = NULL;
+ dfcprintk ((MYIOC_s_INFO_FMT
+ "mptfc_rescan.%d: %llx deleted\n",
+ ioc->name,
+ ioc->sh->host_no,
+ ri->pg0.WWPN));
}
}
spin_unlock_irqrestore(&ioc->fc_rport_lock,flags);
@@ -872,9 +951,8 @@
}
error = pci_register_driver(&mptfc_driver);
- if (error) {
+ if (error)
fc_release_transport(mptfc_transport_template);
- }
return error;
}
@@ -885,7 +963,8 @@
* @pdev: Pointer to pci_dev structure
*
*/
-static void __devexit mptfc_remove(struct pci_dev *pdev)
+static void __devexit
+mptfc_remove(struct pci_dev *pdev)
{
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
struct mptfc_rport_info *p, *n;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 5a06d8d..2512d0e 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -89,6 +89,8 @@
enum mptsas_hotplug_action {
MPTSAS_ADD_DEVICE,
MPTSAS_DEL_DEVICE,
+ MPTSAS_ADD_RAID,
+ MPTSAS_DEL_RAID,
};
struct mptsas_hotplug_event {
@@ -114,6 +116,7 @@
struct mptsas_devinfo {
u16 handle; /* unique id to address this device */
+ u16 handle_parent; /* unique id to address parent device */
u8 phy_id; /* phy number of parent device */
u8 port_id; /* sas physical port this device
is assoc'd with */
@@ -301,9 +304,8 @@
}
mutex_unlock(&hd->ioc->sas_topology_mutex);
- printk("No matching SAS device found!!\n");
kfree(vdev);
- return -ENODEV;
+ return -ENXIO;
out:
vtarget->ioc_id = vdev->ioc_id;
@@ -321,6 +323,7 @@
struct sas_rphy *rphy;
struct mptsas_portinfo *p;
int i;
+ VirtDevice *vdev;
/*
* Handle hotplug removal case.
@@ -344,8 +347,29 @@
out:
mutex_unlock(&hd->ioc->sas_topology_mutex);
/*
- * TODO: Issue target reset to flush firmware outstanding commands.
+ * Issue target reset to flush firmware outstanding commands.
*/
+ vdev = sdev->hostdata;
+ if (vdev->configured_lun){
+ if (mptscsih_TMHandler(hd,
+ MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
+ vdev->bus_id,
+ vdev->target_id,
+ 0, 0, 5 /* 5 second timeout */)
+ < 0){
+
+ /* The TM request failed!
+ * Fatal error case.
+ */
+ printk(MYIOC_s_WARN_FMT
+ "Error processing TaskMgmt id=%d TARGET_RESET\n",
+ hd->ioc->name,
+ vdev->target_id);
+
+ hd->tmPending = 0;
+ hd->tmState = TM_STATE_NONE;
+ }
+ }
mptscsih_slave_destroy(sdev);
}
@@ -714,6 +738,7 @@
mptsas_print_device_pg0(buffer);
device_info->handle = le16_to_cpu(buffer->DevHandle);
+ device_info->handle_parent = le16_to_cpu(buffer->ParentDevHandle);
device_info->phy_id = buffer->PhyNum;
device_info->port_id = buffer->PhysicalPort;
device_info->id = buffer->TargetID;
@@ -863,6 +888,26 @@
return error;
}
+/*
+ * Returns true if there is a scsi end device
+ */
+static inline int
+mptsas_is_end_device(struct mptsas_devinfo * attached)
+{
+ if ((attached->handle) &&
+ (attached->device_info &
+ MPI_SAS_DEVICE_INFO_END_DEVICE) &&
+ ((attached->device_info &
+ MPI_SAS_DEVICE_INFO_SSP_TARGET) |
+ (attached->device_info &
+ MPI_SAS_DEVICE_INFO_STP_TARGET) |
+ (attached->device_info &
+ MPI_SAS_DEVICE_INFO_SATA_DEVICE)))
+ return 1;
+ else
+ return 0;
+}
+
static void
mptsas_parse_device_info(struct sas_identify *identify,
struct mptsas_devinfo *device_info)
@@ -1227,7 +1272,7 @@
}
static struct mptsas_phyinfo *
-mptsas_find_phyinfo_by_handle(MPT_ADAPTER *ioc, u16 handle)
+mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u32 id)
{
struct mptsas_portinfo *port_info;
struct mptsas_phyinfo *phy_info = NULL;
@@ -1239,12 +1284,12 @@
*/
mutex_lock(&ioc->sas_topology_mutex);
list_for_each_entry(port_info, &ioc->sas_topology, list) {
- for (i = 0; i < port_info->num_phys; i++) {
- if (port_info->phy_info[i].attached.handle == handle) {
- phy_info = &port_info->phy_info[i];
- break;
- }
- }
+ for (i = 0; i < port_info->num_phys; i++)
+ if (mptsas_is_end_device(&port_info->phy_info[i].attached))
+ if (port_info->phy_info[i].attached.id == id) {
+ phy_info = &port_info->phy_info[i];
+ break;
+ }
}
mutex_unlock(&ioc->sas_topology_mutex);
@@ -1258,36 +1303,58 @@
MPT_ADAPTER *ioc = ev->ioc;
struct mptsas_phyinfo *phy_info;
struct sas_rphy *rphy;
+ struct scsi_device *sdev;
char *ds = NULL;
-
- if (ev->device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET)
- ds = "ssp";
- if (ev->device_info & MPI_SAS_DEVICE_INFO_STP_TARGET)
- ds = "stp";
- if (ev->device_info & MPI_SAS_DEVICE_INFO_SATA_DEVICE)
- ds = "sata";
+ struct mptsas_devinfo sas_device;
switch (ev->event_type) {
case MPTSAS_DEL_DEVICE:
- printk(MYIOC_s_INFO_FMT
- "removing %s device, channel %d, id %d, phy %d\n",
- ioc->name, ds, ev->channel, ev->id, ev->phy_id);
- phy_info = mptsas_find_phyinfo_by_handle(ioc, ev->handle);
+ phy_info = mptsas_find_phyinfo_by_target(ioc, ev->id);
if (!phy_info) {
printk("mptsas: remove event for non-existant PHY.\n");
break;
}
+ if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET)
+ ds = "ssp";
+ if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_STP_TARGET)
+ ds = "stp";
+ if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+ ds = "sata";
+
+ printk(MYIOC_s_INFO_FMT
+ "removing %s device, channel %d, id %d, phy %d\n",
+ ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
+
if (phy_info->rphy) {
sas_rphy_delete(phy_info->rphy);
phy_info->rphy = NULL;
}
break;
case MPTSAS_ADD_DEVICE:
- printk(MYIOC_s_INFO_FMT
- "attaching %s device, channel %d, id %d, phy %d\n",
- ioc->name, ds, ev->channel, ev->id, ev->phy_id);
+
+ /*
+ * When there is no sas address,
+ * RAID volumes are being deleted,
+ * and hidden phy disk are being added.
+ * We don't know the SAS data yet,
+ * so lookup sas device page to get
+ * pertaining info
+ */
+ if (!ev->sas_address) {
+ if (mptsas_sas_device_pg0(ioc,
+ &sas_device, ev->id,
+ (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT)))
+ break;
+ ev->handle = sas_device.handle;
+ ev->parent_handle = sas_device.handle_parent;
+ ev->channel = sas_device.channel;
+ ev->phy_id = sas_device.phy_id;
+ ev->sas_address = sas_device.sas_address;
+ ev->device_info = sas_device.device_info;
+ }
phy_info = mptsas_find_phyinfo_by_parent(ioc,
ev->parent_handle, ev->phy_id);
@@ -1310,10 +1377,23 @@
phy_info->attached.sas_address = ev->sas_address;
phy_info->attached.device_info = ev->device_info;
+ if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET)
+ ds = "ssp";
+ if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_STP_TARGET)
+ ds = "stp";
+ if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+ ds = "sata";
+
+ printk(MYIOC_s_INFO_FMT
+ "attaching %s device, channel %d, id %d, phy %d\n",
+ ioc->name, ds, ev->channel, ev->id, ev->phy_id);
+
+
rphy = sas_rphy_alloc(phy_info->phy);
if (!rphy)
break; /* non-fatal: an rphy can be added later */
+ rphy->scsi_target_id = phy_info->attached.id;
mptsas_parse_device_info(&rphy->identify, &phy_info->attached);
if (sas_rphy_add(rphy)) {
sas_rphy_free(rphy);
@@ -1322,6 +1402,40 @@
phy_info->rphy = rphy;
break;
+ case MPTSAS_ADD_RAID:
+ sdev = scsi_device_lookup(
+ ioc->sh,
+ ioc->num_ports,
+ ev->id,
+ 0);
+ if (sdev) {
+ scsi_device_put(sdev);
+ break;
+ }
+ printk(MYIOC_s_INFO_FMT
+ "attaching device, channel %d, id %d\n",
+ ioc->name, ioc->num_ports, ev->id);
+ scsi_add_device(ioc->sh,
+ ioc->num_ports,
+ ev->id,
+ 0);
+ mpt_findImVolumes(ioc);
+ break;
+ case MPTSAS_DEL_RAID:
+ sdev = scsi_device_lookup(
+ ioc->sh,
+ ioc->num_ports,
+ ev->id,
+ 0);
+ if (!sdev)
+ break;
+ printk(MYIOC_s_INFO_FMT
+ "removing device, channel %d, id %d\n",
+ ioc->name, ioc->num_ports, ev->id);
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ mpt_findImVolumes(ioc);
+ break;
}
kfree(ev);
@@ -1372,23 +1486,94 @@
schedule_work(&ev->work);
}
+static void
+mptscsih_send_raid_event(MPT_ADAPTER *ioc,
+ EVENT_DATA_RAID *raid_event_data)
+{
+ struct mptsas_hotplug_event *ev;
+ RAID_VOL0_STATUS * volumeStatus;
+
+ if (ioc->bus_type != SAS)
+ return;
+
+ ev = kmalloc(sizeof(*ev), GFP_ATOMIC);
+ if (!ev) {
+ printk(KERN_WARNING "mptsas: lost hotplug event\n");
+ return;
+ }
+
+ memset(ev,0,sizeof(struct mptsas_hotplug_event));
+ INIT_WORK(&ev->work, mptsas_hotplug_work, ev);
+ ev->ioc = ioc;
+ ev->id = raid_event_data->VolumeID;
+
+ switch (raid_event_data->ReasonCode) {
+ case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
+ ev->event_type = MPTSAS_ADD_DEVICE;
+ break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
+ ev->event_type = MPTSAS_DEL_DEVICE;
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_DELETED:
+ ev->event_type = MPTSAS_DEL_RAID;
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_CREATED:
+ ev->event_type = MPTSAS_ADD_RAID;
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
+ volumeStatus = (RAID_VOL0_STATUS *) &
+ raid_event_data->SettingsStatus;
+ ev->event_type = (volumeStatus->State ==
+ MPI_RAIDVOL0_STATUS_STATE_FAILED) ?
+ MPTSAS_DEL_RAID : MPTSAS_ADD_RAID;
+ break;
+ default:
+ break;
+ }
+ schedule_work(&ev->work);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/* work queue thread to clear the persitency table */
+static void
+mptscsih_sas_persist_clear_table(void * arg)
+{
+ MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
+
+ mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
+}
+
static int
mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
{
+ int rc=1;
u8 event = le32_to_cpu(reply->Event) & 0xFF;
if (!ioc->sh)
- return 1;
+ goto out;
switch (event) {
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
mptscsih_send_sas_event(ioc,
(EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data);
- return 1; /* currently means nothing really */
-
+ break;
+ case MPI_EVENT_INTEGRATED_RAID:
+ mptscsih_send_raid_event(ioc,
+ (EVENT_DATA_RAID *)reply->Data);
+ break;
+ case MPI_EVENT_PERSISTENT_TABLE_FULL:
+ INIT_WORK(&ioc->mptscsih_persistTask,
+ mptscsih_sas_persist_clear_table,
+ (void *)ioc);
+ schedule_work(&ioc->mptscsih_persistTask);
+ break;
default:
- return mptscsih_event_process(ioc, reply);
+ rc = mptscsih_event_process(ioc, reply);
+ break;
}
+ out:
+
+ return rc;
}
static int
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index cdac557..05789e5 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -144,7 +144,6 @@
static int mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout );
static u32 SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc);
-static int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout);
static int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout);
int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
@@ -159,11 +158,9 @@
int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
-static void mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtTarget *vtarget);
+static void mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id);
-static struct work_struct mptscsih_persistTask;
-
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
static int mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io);
static void mptscsih_domainValidation(void *hd);
@@ -563,11 +560,24 @@
MPT_SCSI_HOST *hd;
SCSIIORequest_t *pScsiReq;
SCSIIOReply_t *pScsiReply;
- u16 req_idx;
+ u16 req_idx, req_idx_MR;
hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
+ req_idx_MR = (mr != NULL) ?
+ le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx;
+ if ((req_idx != req_idx_MR) ||
+ (mf->u.frame.linkage.arg1 == 0xdeadbeaf)) {
+ printk(MYIOC_s_ERR_FMT "Received a mf that was already freed\n",
+ ioc->name);
+ printk (MYIOC_s_ERR_FMT
+ "req_idx=%x req_idx_MR=%x mf=%p mr=%p sc=%p\n",
+ ioc->name, req_idx, req_idx_MR, mf, mr,
+ hd->ScsiLookup[req_idx_MR]);
+ return 0;
+ }
+
sc = hd->ScsiLookup[req_idx];
if (sc == NULL) {
MPIHeader_t *hdr = (MPIHeader_t *)mf;
@@ -730,6 +740,8 @@
break;
+ case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
+ sc->resid=0;
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
if (scsi_status == MPI_SCSI_STATUS_BUSY)
@@ -789,7 +801,6 @@
case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
- case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
default:
@@ -1530,7 +1541,7 @@
*
* Returns 0 for SUCCESS or -1 if FAILED.
*/
-static int
+int
mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout)
{
MPT_ADAPTER *ioc;
@@ -1721,6 +1732,20 @@
return retval;
}
+static int
+mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
+{
+ switch (ioc->bus_type) {
+ case FC:
+ return 40;
+ case SAS:
+ return 10;
+ case SPI:
+ default:
+ return 2;
+ }
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant
@@ -1792,7 +1817,7 @@
vdev = SCpnt->device->hostdata;
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
vdev->bus_id, vdev->target_id, vdev->lun,
- ctx2abort, 2 /* 2 second timeout */);
+ ctx2abort, mptscsih_get_tm_timeout(ioc));
printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n",
hd->ioc->name,
@@ -1843,7 +1868,7 @@
vdev = SCpnt->device->hostdata;
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
vdev->bus_id, vdev->target_id,
- 0, 0, 5 /* 5 second timeout */);
+ 0, 0, mptscsih_get_tm_timeout(hd->ioc));
printk (KERN_WARNING MYNAM ": %s: target reset: %s (sc=%p)\n",
hd->ioc->name,
@@ -1893,7 +1918,7 @@
vdev = SCpnt->device->hostdata;
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
- vdev->bus_id, 0, 0, 0, 5 /* 5 second timeout */);
+ vdev->bus_id, 0, 0, 0, mptscsih_get_tm_timeout(hd->ioc));
printk (KERN_WARNING MYNAM ": %s: bus reset: %s (sc=%p)\n",
hd->ioc->name,
@@ -2016,6 +2041,42 @@
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+static void
+mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
+{
+ char *desc;
+
+ switch (response_code) {
+ case MPI_SCSITASKMGMT_RSP_TM_COMPLETE:
+ desc = "The task completed.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_INVALID_FRAME:
+ desc = "The IOC received an invalid frame status.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
+ desc = "The task type is not supported.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_TM_FAILED:
+ desc = "The requested task failed.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED:
+ desc = "The task completed successfully.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN:
+ desc = "The LUN request is invalid.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
+ desc = "The task is in the IOC queue and has not been sent to target.";
+ break;
+ default:
+ desc = "unknown";
+ break;
+ }
+ printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
+ ioc->name, response_code, desc);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver
* @ioc: Pointer to MPT_ADAPTER structure
@@ -2064,6 +2125,11 @@
/* Figure out if this was ABORT_TASK, TARGET_RESET, or BUS_RESET! */
tmType = pScsiTmReq->TaskType;
+ if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
+ pScsiTmReply->ResponseCode)
+ mptscsih_taskmgmt_response_code(ioc,
+ pScsiTmReply->ResponseCode);
+
dtmprintk((MYIOC_s_WARN_FMT " TaskType = %d, TerminationCount=%d\n",
ioc->name, tmType, le32_to_cpu(pScsiTmReply->TerminationCount)));
DBG_DUMP_TM_REPLY_FRAME((u32 *)pScsiTmReply);
@@ -2255,7 +2321,7 @@
vtarget->luns[0] &= ~(1 << vdevice->lun);
vtarget->num_luns--;
if (vtarget->num_luns == 0) {
- mptscsih_negotiate_to_asyn_narrow(hd, vtarget);
+ mptscsih_negotiate_to_asyn_narrow(hd, vdevice);
if (hd->ioc->bus_type == SPI) {
if (mptscsih_is_phys_disk(hd->ioc, vtarget->target_id)) {
hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3;
@@ -2585,16 +2651,6 @@
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* work queue thread to clear the persitency table */
-static void
-mptscsih_sas_persist_clear_table(void * arg)
-{
- MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
-
- mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
int
mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
{
@@ -2656,13 +2712,6 @@
break;
}
- /* Persistent table is full. */
- case MPI_EVENT_PERSISTENT_TABLE_FULL:
- INIT_WORK(&mptscsih_persistTask,
- mptscsih_sas_persist_clear_table,(void *)ioc);
- schedule_work(&mptscsih_persistTask);
- break;
-
case MPI_EVENT_NONE: /* 00 */
case MPI_EVENT_LOG_DATA: /* 01 */
case MPI_EVENT_STATE_CHANGE: /* 02 */
@@ -3863,8 +3912,9 @@
*
*/
static void
-mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtTarget *vtarget)
+mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
{
+ VirtTarget *vtarget = vdevice->vtarget;
MPT_ADAPTER *ioc= hd->ioc;
SCSIDevicePage1_t *pcfg1Data;
CONFIGPARMS cfg;
@@ -3874,7 +3924,8 @@
int requested, configuration, data,i;
u8 flags, factor;
- if (ioc->bus_type != SPI)
+ if ((ioc->bus_type != SPI) ||
+ (!vdevice->configured_lun))
return;
if (!ioc->spi_data.sdp1length)
@@ -3910,7 +3961,7 @@
}
mptscsih_setDevicePage1Flags(0, MPT_ASYNC, 0, &requested,
&configuration, flags);
- dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC "
+ dnegoprintk(("nego asyn narrow: id=%d width=0 factor=MPT_ASYNC "
"offset=0 negoFlags=%x request=%x config=%x\n",
id, flags, requested, configuration));
pcfg1Data->RequestedParameters = cpu_to_le32(requested);
@@ -3923,7 +3974,7 @@
flags = vtarget->negoFlags;
mptscsih_setDevicePage1Flags(0, MPT_ASYNC, 0, &requested,
&configuration, flags);
- dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC "
+ dnegoprintk(("nego asyn narrow: id=%d width=0 factor=MPT_ASYNC "
"offset=0 negoFlags=%x request=%x config=%x\n",
vtarget->target_id, flags, requested, configuration));
pcfg1Data->RequestedParameters = cpu_to_le32(requested);
@@ -5620,5 +5671,6 @@
EXPORT_SYMBOL(mptscsih_ioc_reset);
EXPORT_SYMBOL(mptscsih_change_queue_depth);
EXPORT_SYMBOL(mptscsih_timer_expired);
+EXPORT_SYMBOL(mptscsih_TMHandler);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index d3cba12..44b248d 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -108,3 +108,4 @@
extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
extern void mptscsih_timer_expired(unsigned long data);
+extern int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout);
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 7dce292..f148dfa 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -384,6 +384,14 @@
goto out_mptspi_probe;
}
+ /*
+ * issue internal bus reset
+ */
+ if (ioc->spi_data.bus_reset)
+ mptscsih_TMHandler(hd,
+ MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
+ 0, 0, 0, 0, 5);
+
scsi_scan_host(sh);
return 0;
@@ -445,7 +453,7 @@
mptspi_exit(void)
{
pci_unregister_driver(&mptspi_driver);
-
+
mpt_reset_deregister(mptspiDoneCtx);
dprintk((KERN_INFO MYNAM
": Deregistered for IOC reset notifications\n"));
diff --git a/drivers/message/i2o/core.h b/drivers/message/i2o/core.h
index 9062856..184974c 100644
--- a/drivers/message/i2o/core.h
+++ b/drivers/message/i2o/core.h
@@ -60,4 +60,7 @@
#define I2O_IN_PORT 0x40
#define I2O_OUT_PORT 0x44
+/* Motorola/Freescale specific register offset */
+#define I2O_MOTOROLA_PORT_OFFSET 0x10400
+
#define I2O_IRQ_OUTBOUND_POST 0x00000008
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index f9e5a23..c08ddac 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -732,7 +732,7 @@
cpu_to_le32(I2O_CMD_SCSI_ABORT << 24 | HOST_TID << 12 | tid);
msg->body[0] = cpu_to_le32(i2o_cntxt_list_get_ptr(c, SCpnt));
- if (i2o_msg_post_wait(c, msg, I2O_TIMEOUT_SCSI_SCB_ABORT))
+ if (!i2o_msg_post_wait(c, msg, I2O_TIMEOUT_SCSI_SCB_ABORT))
status = SUCCESS;
return status;
diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c
index d698d77..4f1515c 100644
--- a/drivers/message/i2o/pci.c
+++ b/drivers/message/i2o/pci.c
@@ -88,6 +88,11 @@
struct device *dev = &pdev->dev;
int i;
+ if (pci_request_regions(pdev, OSM_DESCRIPTION)) {
+ printk(KERN_ERR "%s: device already claimed\n", c->name);
+ return -ENODEV;
+ }
+
for (i = 0; i < 6; i++) {
/* Skip I/O spaces */
if (!(pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
@@ -163,6 +168,24 @@
c->in_port = c->base.virt + I2O_IN_PORT;
c->out_port = c->base.virt + I2O_OUT_PORT;
+ /* Motorola/Freescale chip does not follow spec */
+ if (pdev->vendor == PCI_VENDOR_ID_MOTOROLA && pdev->device == 0x18c0) {
+ /* Check if CPU is enabled */
+ if (be32_to_cpu(readl(c->base.virt + 0x10000)) & 0x10000000) {
+ printk(KERN_INFO "%s: MPC82XX needs CPU running to "
+ "service I2O.\n", c->name);
+ i2o_pci_free(c);
+ return -ENODEV;
+ } else {
+ c->irq_status += I2O_MOTOROLA_PORT_OFFSET;
+ c->irq_mask += I2O_MOTOROLA_PORT_OFFSET;
+ c->in_port += I2O_MOTOROLA_PORT_OFFSET;
+ c->out_port += I2O_MOTOROLA_PORT_OFFSET;
+ printk(KERN_INFO "%s: MPC82XX workarounds activated.\n",
+ c->name);
+ }
+ }
+
if (i2o_dma_alloc(dev, &c->status, 8, GFP_KERNEL)) {
i2o_pci_free(c);
return -ENOMEM;
@@ -298,7 +321,7 @@
struct i2o_controller *c;
int rc;
struct pci_dev *i960 = NULL;
- int pci_dev_busy = 0;
+ int enabled = pdev->is_enabled;
printk(KERN_INFO "i2o: Checking for PCI I2O controllers...\n");
@@ -308,16 +331,12 @@
return -ENODEV;
}
- if ((rc = pci_enable_device(pdev))) {
- printk(KERN_WARNING "i2o: couldn't enable device %s\n",
- pci_name(pdev));
- return rc;
- }
-
- if (pci_request_regions(pdev, OSM_DESCRIPTION)) {
- printk(KERN_ERR "i2o: device already claimed\n");
- return -ENODEV;
- }
+ if (!enabled)
+ if ((rc = pci_enable_device(pdev))) {
+ printk(KERN_WARNING "i2o: couldn't enable device %s\n",
+ pci_name(pdev));
+ return rc;
+ }
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "i2o: no suitable DMA found for %s\n",
@@ -395,9 +414,7 @@
if ((rc = i2o_pci_alloc(c))) {
printk(KERN_ERR "%s: DMA / IO allocation for I2O controller "
- " failed\n", c->name);
- if (rc == -ENODEV)
- pci_dev_busy = 1;
+ "failed\n", c->name);
goto free_controller;
}
@@ -425,7 +442,7 @@
i2o_iop_free(c);
disable:
- if (!pci_dev_busy)
+ if (!enabled)
pci_disable_device(pdev);
return rc;
diff --git a/drivers/misc/ibmasm/uart.c b/drivers/misc/ibmasm/uart.c
index 7e98434..9783caf 100644
--- a/drivers/misc/ibmasm/uart.c
+++ b/drivers/misc/ibmasm/uart.c
@@ -50,7 +50,7 @@
memset(&uport, 0, sizeof(struct uart_port));
uport.irq = sp->irq;
uport.uartclk = 3686400;
- uport.flags = UPF_AUTOPROBE | UPF_SHARE_IRQ;
+ uport.flags = UPF_SHARE_IRQ;
uport.iotype = UPIO_MEM;
uport.membase = iomem_base;
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index c483a86..5d397b7 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -65,7 +65,7 @@
depends on SOC_AU1X00 && MMC
help
This selects the AMD Alchemy(R) Multimedia card interface.
- iIf you have a Alchemy platform with a MMC slot, say Y or M here.
+ If you have a Alchemy platform with a MMC slot, say Y or M here.
If unsure, say N.
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
index aaf0463..227c39a 100644
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -194,7 +194,7 @@
u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
- switch(cmd->flags) {
+ switch (mmc_rsp_type(cmd->flags)) {
case MMC_RSP_R1:
mmccmd |= SD_CMD_RT_1;
break;
@@ -483,34 +483,35 @@
cmd = mrq->cmd;
cmd->error = MMC_ERR_NONE;
- if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_SHORT) {
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136) {
+ u32 r[4];
+ int i;
- /* Techincally, we should be getting all 48 bits of the response
- * (SD_RESP1 + SD_RESP2), but because our response omits the CRC,
- * our data ends up being shifted 8 bits to the right. In this case,
- * that means that the OSR data starts at bit 31, so we can just
- * read RESP0 and return that
- */
+ r[0] = au_readl(host->iobase + SD_RESP3);
+ r[1] = au_readl(host->iobase + SD_RESP2);
+ r[2] = au_readl(host->iobase + SD_RESP1);
+ r[3] = au_readl(host->iobase + SD_RESP0);
- cmd->resp[0] = au_readl(host->iobase + SD_RESP0);
- }
- else if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_LONG) {
- u32 r[4];
- int i;
+ /* The CRC is omitted from the response, so really
+ * we only got 120 bytes, but the engine expects
+ * 128 bits, so we have to shift things up
+ */
- r[0] = au_readl(host->iobase + SD_RESP3);
- r[1] = au_readl(host->iobase + SD_RESP2);
- r[2] = au_readl(host->iobase + SD_RESP1);
- r[3] = au_readl(host->iobase + SD_RESP0);
-
- /* The CRC is omitted from the response, so really we only got
- * 120 bytes, but the engine expects 128 bits, so we have to shift
- * things up
- */
-
- for(i = 0; i < 4; i++) {
- cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8;
- if (i != 3) cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24;
+ for(i = 0; i < 4; i++) {
+ cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8;
+ if (i != 3)
+ cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24;
+ }
+ } else {
+ /* Techincally, we should be getting all 48 bits of
+ * the response (SD_RESP1 + SD_RESP2), but because
+ * our response omits the CRC, our data ends up
+ * being shifted 8 bits to the right. In this case,
+ * that means that the OSR data starts at bit 31,
+ * so we can just read RESP0 and return that
+ */
+ cmd->resp[0] = au_readl(host->iobase + SD_RESP0);
}
}
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index bfca5c1..1888060 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -211,7 +211,7 @@
appcmd.opcode = MMC_APP_CMD;
appcmd.arg = rca << 16;
- appcmd.flags = MMC_RSP_R1;
+ appcmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
appcmd.retries = 0;
memset(appcmd.resp, 0, sizeof(appcmd.resp));
appcmd.data = NULL;
@@ -331,7 +331,7 @@
cmd.opcode = MMC_SELECT_CARD;
cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
if (err != MMC_ERR_NONE)
@@ -358,7 +358,7 @@
struct mmc_command cmd;
cmd.opcode = SD_APP_SET_BUS_WIDTH;
cmd.arg = SD_BUS_WIDTH_4;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_app_cmd(host, card->rca, &cmd,
CMD_RETRIES);
@@ -386,7 +386,7 @@
cmd.opcode = MMC_SELECT_CARD;
cmd.arg = 0;
- cmd.flags = MMC_RSP_NONE;
+ cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;
mmc_wait_for_cmd(host, &cmd, 0);
}
@@ -677,7 +677,7 @@
cmd.opcode = MMC_GO_IDLE_STATE;
cmd.arg = 0;
- cmd.flags = MMC_RSP_NONE;
+ cmd.flags = MMC_RSP_NONE | MMC_CMD_BC;
mmc_wait_for_cmd(host, &cmd, 0);
@@ -738,7 +738,7 @@
cmd.opcode = MMC_SEND_OP_COND;
cmd.arg = ocr;
- cmd.flags = MMC_RSP_R3;
+ cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
for (i = 100; i; i--) {
err = mmc_wait_for_cmd(host, &cmd, 0);
@@ -766,7 +766,7 @@
cmd.opcode = SD_APP_OP_COND;
cmd.arg = ocr;
- cmd.flags = MMC_RSP_R3;
+ cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
for (i = 100; i; i--) {
err = mmc_wait_for_app_cmd(host, 0, &cmd, CMD_RETRIES);
@@ -805,7 +805,7 @@
cmd.opcode = MMC_ALL_SEND_CID;
cmd.arg = 0;
- cmd.flags = MMC_RSP_R2;
+ cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;
err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
if (err == MMC_ERR_TIMEOUT) {
@@ -835,7 +835,7 @@
cmd.opcode = SD_SEND_RELATIVE_ADDR;
cmd.arg = 0;
- cmd.flags = MMC_RSP_R6;
+ cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR;
err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
if (err != MMC_ERR_NONE)
@@ -856,7 +856,7 @@
} else {
cmd.opcode = MMC_SET_RELATIVE_ADDR;
cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
if (err != MMC_ERR_NONE)
@@ -878,7 +878,7 @@
cmd.opcode = MMC_SEND_CSD;
cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R2;
+ cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;
err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
if (err != MMC_ERR_NONE) {
@@ -920,7 +920,7 @@
cmd.opcode = MMC_APP_CMD;
cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(host, &cmd, 0);
if ((err != MMC_ERR_NONE) || !(cmd.resp[0] & R1_APP_CMD)) {
@@ -932,7 +932,7 @@
cmd.opcode = SD_APP_SEND_SCR;
cmd.arg = 0;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
memset(&data, 0, sizeof(struct mmc_data));
@@ -1003,7 +1003,7 @@
cmd.opcode = MMC_SEND_STATUS;
cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
if (err == MMC_ERR_NONE)
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index 5b014c3..8eb2a2e 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -171,14 +171,14 @@
brq.mrq.data = &brq.data;
brq.cmd.arg = req->sector << 9;
- brq.cmd.flags = MMC_RSP_R1;
+ brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
brq.data.timeout_ns = card->csd.tacc_ns * 10;
brq.data.timeout_clks = card->csd.tacc_clks * 10;
brq.data.blksz_bits = md->block_bits;
brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
brq.stop.opcode = MMC_STOP_TRANSMISSION;
brq.stop.arg = 0;
- brq.stop.flags = MMC_RSP_R1B;
+ brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
if (rq_data_dir(req) == READ) {
brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;
@@ -223,7 +223,7 @@
cmd.opcode = MMC_SEND_STATUS;
cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 5);
if (err) {
printk(KERN_ERR "%s: error %d requesting status\n",
@@ -430,7 +430,7 @@
mmc_card_claim_host(card);
cmd.opcode = MMC_SET_BLOCKLEN;
cmd.arg = 1 << md->block_bits;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 5);
mmc_card_release_host(card);
diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
index 634ef53..37ee7f8 100644
--- a/drivers/mmc/mmci.c
+++ b/drivers/mmc/mmci.c
@@ -124,15 +124,10 @@
}
c |= cmd->opcode | MCI_CPSM_ENABLE;
- switch (cmd->flags & MMC_RSP_MASK) {
- case MMC_RSP_NONE:
- default:
- break;
- case MMC_RSP_LONG:
- c |= MCI_CPSM_LONGRSP;
- case MMC_RSP_SHORT:
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136)
+ c |= MCI_CPSM_LONGRSP;
c |= MCI_CPSM_RESPONSE;
- break;
}
if (/*interrupt*/0)
c |= MCI_CPSM_INTERRUPT;
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
index ee8f8a0..285d7d0 100644
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -178,14 +178,15 @@
if (cmd->flags & MMC_RSP_BUSY)
cmdat |= CMDAT_BUSY;
- switch (cmd->flags & (MMC_RSP_MASK | MMC_RSP_CRC)) {
- case MMC_RSP_SHORT | MMC_RSP_CRC:
+#define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
+ switch (RSP_TYPE(mmc_resp_type(cmd))) {
+ case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6 */
cmdat |= CMDAT_RESP_SHORT;
break;
- case MMC_RSP_SHORT:
+ case RSP_TYPE(MMC_RSP_R3):
cmdat |= CMDAT_RESP_R3;
break;
- case MMC_RSP_LONG | MMC_RSP_CRC:
+ case RSP_TYPE(MMC_RSP_R2):
cmdat |= CMDAT_RESP_R2;
break;
default:
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index f257576..3be397d 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -459,7 +459,7 @@
/*
* Do we expect a reply?
*/
- if ((cmd->flags & MMC_RSP_MASK) != MMC_RSP_NONE) {
+ if (cmd->flags & MMC_RSP_PRESENT) {
/*
* Read back status.
*/
@@ -476,10 +476,10 @@
cmd->error = MMC_ERR_BADCRC;
/* All ok */
else {
- if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_SHORT)
- wbsd_get_short_reply(host, cmd);
- else
+ if (cmd->flags & MMC_RSP_136)
wbsd_get_long_reply(host, cmd);
+ else
+ wbsd_get_short_reply(host, cmd);
}
}
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index effa0d7..205bb70 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -301,7 +301,7 @@
config MTD_XIP
bool "XIP aware MTD support"
- depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && EXPERIMENTAL && ARM
+ depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && EXPERIMENTAL && ARCH_MTD_XIP
default y if XIP_KERNEL
help
This allows MTD support to work with flash memory which is also
diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c
index 701620b..8b3784e 100644
--- a/drivers/mtd/maps/dc21285.c
+++ b/drivers/mtd/maps/dc21285.c
@@ -110,8 +110,9 @@
{
while (len > 0) {
map_word d;
- d.x[0] = *((uint32_t*)from)++;
+ d.x[0] = *((uint32_t*)from);
dc21285_write32(map, d, to);
+ from += 4;
to += 4;
len -= 4;
}
@@ -121,8 +122,9 @@
{
while (len > 0) {
map_word d;
- d.x[0] = *((uint16_t*)from)++;
+ d.x[0] = *((uint16_t*)from);
dc21285_write16(map, d, to);
+ from += 2;
to += 2;
len -= 2;
}
@@ -131,8 +133,9 @@
static void dc21285_copy_to_8(struct map_info *map, unsigned long to, const void *from, ssize_t len)
{
map_word d;
- d.x[0] = *((uint8_t*)from)++;
+ d.x[0] = *((uint8_t*)from);
dc21285_write8(map, d, to);
+ from++;
to++;
len--;
}
diff --git a/drivers/mtd/maps/tsunami_flash.c b/drivers/mtd/maps/tsunami_flash.c
index 9e21e6c..0f915ac 100644
--- a/drivers/mtd/maps/tsunami_flash.c
+++ b/drivers/mtd/maps/tsunami_flash.c
@@ -62,7 +62,7 @@
static struct map_info tsunami_flash_map = {
.name = "flash chip on the Tsunami TIG bus",
.size = MAX_TIG_FLASH_SIZE,
- .phys = NO_XIP;
+ .phys = NO_XIP,
.bankwidth = 1,
.read = tsunami_flash_read8,
.copy_from = tsunami_flash_copy_from,
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 7488ee7..7f47124 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -753,9 +753,11 @@
enum ChipCaps { CapBusMaster=0x20, CapPwrMgmt=0x2000 };
struct vortex_extra_stats {
- unsigned long tx_deferred;
- unsigned long tx_multiple_collisions;
- unsigned long rx_bad_ssd;
+ unsigned long tx_deferred;
+ unsigned long tx_max_collisions;
+ unsigned long tx_multiple_collisions;
+ unsigned long tx_single_collisions;
+ unsigned long rx_bad_ssd;
};
struct vortex_private {
@@ -863,12 +865,14 @@
const char str[ETH_GSTRING_LEN];
} ethtool_stats_keys[] = {
{ "tx_deferred" },
+ { "tx_max_collisions" },
{ "tx_multiple_collisions" },
+ { "tx_single_collisions" },
{ "rx_bad_ssd" },
};
/* number of ETHTOOL_GSTATS u64's */
-#define VORTEX_NUM_STATS 3
+#define VORTEX_NUM_STATS 5
static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
int chip_idx, int card_idx);
@@ -2108,9 +2112,12 @@
iowrite8(0, ioaddr + TxStatus);
if (tx_status & 0x30) { /* txJabber or txUnderrun */
do_tx_reset = 1;
- } else if ((tx_status & 0x08) && (vp->drv_flags & MAX_COLLISION_RESET)) { /* maxCollisions */
- do_tx_reset = 1;
- reset_mask = 0x0108; /* Reset interface logic, but not download logic */
+ } else if (tx_status & 0x08) { /* maxCollisions */
+ vp->xstats.tx_max_collisions++;
+ if (vp->drv_flags & MAX_COLLISION_RESET) {
+ do_tx_reset = 1;
+ reset_mask = 0x0108; /* Reset interface logic, but not download logic */
+ }
} else { /* Merely re-enable the transmitter. */
iowrite16(TxEnable, ioaddr + EL3_CMD);
}
@@ -2926,7 +2933,6 @@
EL3WINDOW(6);
vp->stats.tx_carrier_errors += ioread8(ioaddr + 0);
vp->stats.tx_heartbeat_errors += ioread8(ioaddr + 1);
- vp->stats.collisions += ioread8(ioaddr + 3);
vp->stats.tx_window_errors += ioread8(ioaddr + 4);
vp->stats.rx_fifo_errors += ioread8(ioaddr + 5);
vp->stats.tx_packets += ioread8(ioaddr + 6);
@@ -2939,10 +2945,15 @@
vp->stats.tx_bytes += ioread16(ioaddr + 12);
/* Extra stats for get_ethtool_stats() */
vp->xstats.tx_multiple_collisions += ioread8(ioaddr + 2);
+ vp->xstats.tx_single_collisions += ioread8(ioaddr + 3);
vp->xstats.tx_deferred += ioread8(ioaddr + 8);
EL3WINDOW(4);
vp->xstats.rx_bad_ssd += ioread8(ioaddr + 12);
+ vp->stats.collisions = vp->xstats.tx_multiple_collisions
+ + vp->xstats.tx_single_collisions
+ + vp->xstats.tx_max_collisions;
+
{
u8 up = ioread8(ioaddr + 13);
vp->stats.rx_bytes += (up & 0x0f) << 16;
@@ -3036,8 +3047,10 @@
spin_unlock_irqrestore(&vp->lock, flags);
data[0] = vp->xstats.tx_deferred;
- data[1] = vp->xstats.tx_multiple_collisions;
- data[2] = vp->xstats.rx_bad_ssd;
+ data[1] = vp->xstats.tx_max_collisions;
+ data[2] = vp->xstats.tx_multiple_collisions;
+ data[3] = vp->xstats.tx_single_collisions;
+ data[4] = vp->xstats.rx_bad_ssd;
}
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index adfba44..2beac55 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -586,6 +586,7 @@
dma_addr_t tx_bufs_dma;
signed char phys[4]; /* MII device addresses. */
char twistie, twist_row, twist_col; /* Twister tune state. */
+ unsigned int watchdog_fired : 1;
unsigned int default_port : 4; /* Last dev->if_port value. */
unsigned int have_thread : 1;
spinlock_t lock;
@@ -638,6 +639,7 @@
static void __set_rx_mode (struct net_device *dev);
static void rtl8139_hw_start (struct net_device *dev);
static void rtl8139_thread (void *_data);
+static void rtl8139_tx_timeout_task(void *_data);
static struct ethtool_ops rtl8139_ethtool_ops;
/* write MMIO register, with flush */
@@ -1598,13 +1600,14 @@
{
struct net_device *dev = _data;
struct rtl8139_private *tp = netdev_priv(dev);
- unsigned long thr_delay;
+ unsigned long thr_delay = next_tick;
- if (rtnl_shlock_nowait() == 0) {
+ if (tp->watchdog_fired) {
+ tp->watchdog_fired = 0;
+ rtl8139_tx_timeout_task(_data);
+ } else if (rtnl_shlock_nowait() == 0) {
rtl8139_thread_iter (dev, tp, tp->mmio_addr);
rtnl_unlock ();
-
- thr_delay = next_tick;
} else {
/* unlikely race. mitigate with fast poll. */
thr_delay = HZ / 2;
@@ -1631,7 +1634,8 @@
if (tp->have_thread) {
cancel_rearming_delayed_work(&tp->thread);
tp->have_thread = 0;
- }
+ } else
+ flush_scheduled_work();
}
static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
@@ -1642,14 +1646,13 @@
/* XXX account for unsent Tx packets in tp->stats.tx_dropped */
}
-
-static void rtl8139_tx_timeout (struct net_device *dev)
+static void rtl8139_tx_timeout_task (void *_data)
{
+ struct net_device *dev = _data;
struct rtl8139_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
int i;
u8 tmp8;
- unsigned long flags;
printk (KERN_DEBUG "%s: Transmit timeout, status %2.2x %4.4x %4.4x "
"media %2.2x.\n", dev->name, RTL_R8 (ChipCmd),
@@ -1670,23 +1673,34 @@
if (tmp8 & CmdTxEnb)
RTL_W8 (ChipCmd, CmdRxEnb);
- spin_lock(&tp->rx_lock);
+ spin_lock_bh(&tp->rx_lock);
/* Disable interrupts by clearing the interrupt mask. */
RTL_W16 (IntrMask, 0x0000);
/* Stop a shared interrupt from scavenging while we are. */
- spin_lock_irqsave (&tp->lock, flags);
+ spin_lock_irq(&tp->lock);
rtl8139_tx_clear (tp);
- spin_unlock_irqrestore (&tp->lock, flags);
+ spin_unlock_irq(&tp->lock);
/* ...and finally, reset everything */
if (netif_running(dev)) {
rtl8139_hw_start (dev);
netif_wake_queue (dev);
}
- spin_unlock(&tp->rx_lock);
+ spin_unlock_bh(&tp->rx_lock);
}
+static void rtl8139_tx_timeout (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ if (!tp->have_thread) {
+ INIT_WORK(&tp->thread, rtl8139_tx_timeout_task, dev);
+ schedule_delayed_work(&tp->thread, next_tick);
+ } else
+ tp->watchdog_fired = 1;
+
+}
static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
{
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 626508a..47c72a6 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -4,9 +4,9 @@
#
menu "Network device support"
+ depends on NET
config NETDEVICES
- depends on NET
default y if UML
bool "Network device support"
---help---
@@ -24,9 +24,6 @@
If unsure, say Y.
-# All the following symbols are dependent on NETDEVICES - do not repeat
-# that for each of the symbols.
-if NETDEVICES
config IFB
tristate "Intermediate Functional Block support"
@@ -2034,13 +2031,28 @@
It does not support the link failover and network management
features that "portable" vendor supplied sk98lin driver does.
+ This driver supports adapters based on the original Yukon chipset:
+ Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
+ Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
+
+ It does not support the newer Yukon2 chipset: a separate driver,
+ sky2, is provided for Yukon2-based adapters.
+
+ To compile this driver as a module, choose M here: the module
+ will be called skge. This is recommended.
config SKY2
tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
depends on PCI && EXPERIMENTAL
select CRC32
---help---
- This driver support the Marvell Yukon 2 Gigabit Ethernet adapter.
+ This driver supports Gigabit Ethernet adapters based on the the
+ Marvell Yukon 2 chipset:
+ Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
+ 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
+
+ This driver does not support the original Yukon chipset: a seperate
+ driver, skge, is provided for Yukon-based adapters.
To compile this driver as a module, choose M here: the module
will be called sky2. This is recommended.
@@ -2050,8 +2062,15 @@
depends on PCI
---help---
Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
- compliant Gigabit Ethernet Adapter. The following adapters are supported
- by this driver:
+ compliant Gigabit Ethernet Adapter.
+
+ This driver supports the original Yukon chipset. A cleaner driver is
+ also available (skge) which seems to work better than this one.
+
+ This driver does not support the newer Yukon2 chipset. A seperate
+ driver, sky2, is provided to support Yukon2-based adapters.
+
+ The following adapters are supported by this driver:
- 3Com 3C940 Gigabit LOM Ethernet Adapter
- 3Com 3C941 Gigabit LOM Ethernet Adapter
- Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
@@ -2696,8 +2715,6 @@
If you want to log kernel messages over the network, enable this.
See <file:Documentation/networking/netconsole.txt> for details.
-endif #NETDEVICES
-
config NETPOLL
def_bool NETCONSOLE
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index b8953de..b508812 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -1002,6 +1002,8 @@
mac1 = 0;
for(i = 0; i < 4; i++) {
+ int tmp;
+
mac1 = mac1 << 8;
tmp = read_eeprom_byte(dev, 0x8c+i);
if (tmp < 0) {
@@ -1012,6 +1014,8 @@
}
mac2 = 0;
for(i = 4; i < 8; i++) {
+ int tmp;
+
mac2 = mac2 << 8;
tmp = read_eeprom_byte(dev, 0x8c+i);
if (tmp < 0) {
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index df9d6e8..c3267e4 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -1399,7 +1399,6 @@
b44_init_rings(bp);
b44_init_hw(bp);
- netif_carrier_off(dev);
b44_check_phy(bp);
err = request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev);
@@ -1464,7 +1463,7 @@
#endif
b44_halt(bp);
b44_free_rings(bp);
- netif_carrier_off(bp->dev);
+ netif_carrier_off(dev);
spin_unlock_irq(&bp->lock);
@@ -2000,6 +1999,8 @@
dev->irq = pdev->irq;
SET_ETHTOOL_OPS(dev, &b44_ethtool_ops);
+ netif_carrier_off(dev);
+
err = b44_get_invariants(bp);
if (err) {
printk(KERN_ERR PFX "Problem fetching invariants of chip, "
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 49fa1e4..a24200d 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1,6 +1,6 @@
/* bnx2.c: Broadcom NX2 network driver.
*
- * Copyright (c) 2004, 2005 Broadcom Corporation
+ * Copyright (c) 2004, 2005, 2006 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,8 +14,8 @@
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.4.30"
-#define DRV_MODULE_RELDATE "October 11, 2005"
+#define DRV_MODULE_VERSION "1.4.31"
+#define DRV_MODULE_RELDATE "January 19, 2006"
#define RUN_AT(x) (jiffies + (x))
@@ -316,6 +316,10 @@
u32 val;
REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
+ BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
+ BNX2_PCICFG_INT_ACK_CMD_MASK_INT | bp->last_status_idx);
+
+ REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | bp->last_status_idx);
val = REG_RD(bp, BNX2_HC_COMMAND);
@@ -1171,7 +1175,8 @@
}
if ((CHIP_ID(bp) == CHIP_ID_5708_A0) ||
- (CHIP_ID(bp) == CHIP_ID_5708_B0)) {
+ (CHIP_ID(bp) == CHIP_ID_5708_B0) ||
+ (CHIP_ID(bp) == CHIP_ID_5708_B1)) {
/* increase tx signal amplitude */
bnx2_write_phy(bp, BCM5708S_BLK_ADDR,
BCM5708S_BLK_ADDR_TX_MISC);
@@ -1326,44 +1331,78 @@
return 0;
}
+static int bnx2_test_link(struct bnx2 *);
+
static int
-bnx2_fw_sync(struct bnx2 *bp, u32 msg_data)
+bnx2_set_phy_loopback(struct bnx2 *bp)
+{
+ u32 mac_mode;
+ int rc, i;
+
+ spin_lock_bh(&bp->phy_lock);
+ rc = bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK | BMCR_FULLDPLX |
+ BMCR_SPEED1000);
+ spin_unlock_bh(&bp->phy_lock);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < 10; i++) {
+ if (bnx2_test_link(bp) == 0)
+ break;
+ udelay(10);
+ }
+
+ mac_mode = REG_RD(bp, BNX2_EMAC_MODE);
+ mac_mode &= ~(BNX2_EMAC_MODE_PORT | BNX2_EMAC_MODE_HALF_DUPLEX |
+ BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK |
+ BNX2_EMAC_MODE_25G);
+
+ mac_mode |= BNX2_EMAC_MODE_PORT_GMII;
+ REG_WR(bp, BNX2_EMAC_MODE, mac_mode);
+ bp->link_up = 1;
+ return 0;
+}
+
+static int
+bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int silent)
{
int i;
u32 val;
- if (bp->fw_timed_out)
- return -EBUSY;
-
bp->fw_wr_seq++;
msg_data |= bp->fw_wr_seq;
REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB, msg_data);
/* wait for an acknowledgement. */
- for (i = 0; i < (FW_ACK_TIME_OUT_MS * 1000)/5; i++) {
- udelay(5);
+ for (i = 0; i < (FW_ACK_TIME_OUT_MS / 10); i++) {
+ msleep(10);
val = REG_RD_IND(bp, bp->shmem_base + BNX2_FW_MB);
if ((val & BNX2_FW_MSG_ACK) == (msg_data & BNX2_DRV_MSG_SEQ))
break;
}
+ if ((msg_data & BNX2_DRV_MSG_DATA) == BNX2_DRV_MSG_DATA_WAIT0)
+ return 0;
/* If we timed out, inform the firmware that this is the case. */
- if (((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) &&
- ((msg_data & BNX2_DRV_MSG_DATA) != BNX2_DRV_MSG_DATA_WAIT0)) {
+ if ((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) {
+ if (!silent)
+ printk(KERN_ERR PFX "fw sync timeout, reset code = "
+ "%x\n", msg_data);
msg_data &= ~BNX2_DRV_MSG_CODE;
msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT;
REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB, msg_data);
- bp->fw_timed_out = 1;
-
return -EBUSY;
}
+ if ((val & BNX2_FW_MSG_STATUS_MASK) != BNX2_FW_MSG_STATUS_OK)
+ return -EIO;
+
return 0;
}
@@ -1657,7 +1696,7 @@
rmb();
while (sw_cons != hw_cons) {
unsigned int len;
- u16 status;
+ u32 status;
struct sw_bd *rx_buf;
struct sk_buff *skb;
@@ -1673,7 +1712,7 @@
rx_hdr = (struct l2_fhdr *) skb->data;
len = rx_hdr->l2_fhdr_pkt_len - 4;
- if (rx_hdr->l2_fhdr_errors &
+ if ((status = rx_hdr->l2_fhdr_status) &
(L2_FHDR_ERRORS_BAD_CRC |
L2_FHDR_ERRORS_PHY_DECODE |
L2_FHDR_ERRORS_ALIGNMENT |
@@ -1732,15 +1771,13 @@
}
- status = rx_hdr->l2_fhdr_status;
skb->ip_summed = CHECKSUM_NONE;
if (bp->rx_csum &&
(status & (L2_FHDR_STATUS_TCP_SEGMENT |
L2_FHDR_STATUS_UDP_DATAGRAM))) {
- u16 cksum = rx_hdr->l2_fhdr_tcp_udp_xsum;
-
- if (cksum == 0xffff)
+ if (likely((status & (L2_FHDR_ERRORS_TCP_XSUM |
+ L2_FHDR_ERRORS_UDP_XSUM)) == 0))
skb->ip_summed = CHECKSUM_UNNECESSARY;
}
@@ -1794,7 +1831,7 @@
bnx2_msi(int irq, void *dev_instance, struct pt_regs *regs)
{
struct net_device *dev = dev_instance;
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
prefetch(bp->status_blk);
REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
@@ -1814,7 +1851,7 @@
bnx2_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
{
struct net_device *dev = dev_instance;
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
/* When using INTx, it is possible for the interrupt to arrive
* at the CPU before the status block posted prior to the
@@ -1859,7 +1896,7 @@
static int
bnx2_poll(struct net_device *dev, int *budget)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
if ((bp->status_blk->status_attn_bits &
STATUS_ATTN_BITS_LINK_STATE) !=
@@ -1891,9 +1928,20 @@
if (!bnx2_has_work(bp)) {
netif_rx_complete(dev);
+ if (likely(bp->flags & USING_MSI_FLAG)) {
+ REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
+ BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
+ bp->last_status_idx);
+ return 0;
+ }
REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
- BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
- bp->last_status_idx);
+ BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
+ BNX2_PCICFG_INT_ACK_CMD_MASK_INT |
+ bp->last_status_idx);
+
+ REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
+ BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
+ bp->last_status_idx);
return 0;
}
@@ -1906,7 +1954,7 @@
static void
bnx2_set_rx_mode(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
u32 rx_mode, sort_mode;
int i;
@@ -1916,11 +1964,11 @@
BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG);
sort_mode = 1 | BNX2_RPM_SORT_USER0_BC_EN;
#ifdef BCM_VLAN
- if (!bp->vlgrp) {
+ if (!bp->vlgrp && !(bp->flags & ASF_ENABLE_FLAG))
rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
- }
#else
- rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
+ if (!(bp->flags & ASF_ENABLE_FLAG))
+ rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
#endif
if (dev->flags & IFF_PROMISC) {
/* Promiscuous mode. */
@@ -2338,7 +2386,6 @@
val |= BNX2_EMAC_MODE_PORT_MII |
BNX2_EMAC_MODE_MPKT_RCVD |
BNX2_EMAC_MODE_ACPI_RCVD |
- BNX2_EMAC_MODE_FORCE_LINK |
BNX2_EMAC_MODE_MPKT;
REG_WR(bp, BNX2_EMAC_MODE, val);
@@ -2374,7 +2421,8 @@
wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
}
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg);
+ if (!(bp->flags & NO_WOL_FLAG))
+ bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg, 0);
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
if ((CHIP_ID(bp) == CHIP_ID_5706_A0) ||
@@ -2708,9 +2756,16 @@
if (j == entry_count) {
bp->flash_info = NULL;
printk(KERN_ALERT PFX "Unknown flash/EEPROM type.\n");
- rc = -ENODEV;
+ return -ENODEV;
}
+ val = REG_RD_IND(bp, bp->shmem_base + BNX2_SHARED_HW_CFG_CONFIG2);
+ val &= BNX2_SHARED_HW_CFG2_NVM_SIZE_MASK;
+ if (val)
+ bp->flash_size = val;
+ else
+ bp->flash_size = bp->flash_info->total_size;
+
return rc;
}
@@ -3014,16 +3069,14 @@
val = REG_RD(bp, BNX2_MISC_ENABLE_CLR_BITS);
udelay(5);
+ /* Wait for the firmware to tell us it is ok to issue a reset. */
+ bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1);
+
/* Deposit a driver reset signature so the firmware knows that
* this is a soft reset. */
REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_RESET_SIGNATURE,
BNX2_DRV_RESET_SIGNATURE_MAGIC);
- bp->fw_timed_out = 0;
-
- /* Wait for the firmware to tell us it is ok to issue a reset. */
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code);
-
/* Do a dummy read to force the chip to complete all current transaction
* before we issue a reset. */
val = REG_RD(bp, BNX2_MISC_ID);
@@ -3062,10 +3115,10 @@
return -ENODEV;
}
- bp->fw_timed_out = 0;
-
/* Wait for the firmware to finish its initialization. */
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT1 | reset_code);
+ rc = bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT1 | reset_code, 0);
+ if (rc)
+ return rc;
if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
/* Adjust the voltage regular to two steps lower. The default
@@ -3083,6 +3136,7 @@
bnx2_init_chip(struct bnx2 *bp)
{
u32 val;
+ int rc;
/* Make sure the interrupt is not active. */
REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
@@ -3098,7 +3152,7 @@
val |= (0x2 << 20) | (1 << 11);
- if ((bp->flags & PCIX_FLAG) && (bp->bus_speed_mhz = 133))
+ if ((bp->flags & PCIX_FLAG) && (bp->bus_speed_mhz == 133))
val |= (1 << 23);
if ((CHIP_NUM(bp) == CHIP_NUM_5706) &&
@@ -3218,17 +3272,22 @@
REG_WR(bp, BNX2_HC_ATTN_BITS_ENABLE, STATUS_ATTN_BITS_LINK_STATE);
+ if (REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_FEATURE) &
+ BNX2_PORT_FEATURE_ASF_ENABLED)
+ bp->flags |= ASF_ENABLE_FLAG;
+
/* Initialize the receive filter. */
bnx2_set_rx_mode(bp->dev);
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET);
+ rc = bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET,
+ 0);
REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, 0x5ffffff);
REG_RD(bp, BNX2_MISC_ENABLE_SET_BITS);
udelay(20);
- return 0;
+ return rc;
}
@@ -3880,26 +3939,33 @@
return ret;
}
+#define BNX2_MAC_LOOPBACK 0
+#define BNX2_PHY_LOOPBACK 1
+
static int
-bnx2_test_loopback(struct bnx2 *bp)
+bnx2_run_loopback(struct bnx2 *bp, int loopback_mode)
{
unsigned int pkt_size, num_pkts, i;
struct sk_buff *skb, *rx_skb;
unsigned char *packet;
- u16 rx_start_idx, rx_idx, send_idx;
- u32 send_bseq, val;
+ u16 rx_start_idx, rx_idx;
+ u32 val;
dma_addr_t map;
struct tx_bd *txbd;
struct sw_bd *rx_buf;
struct l2_fhdr *rx_hdr;
int ret = -ENODEV;
- if (!netif_running(bp->dev))
- return -ENODEV;
-
- bp->loopback = MAC_LOOPBACK;
- bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_DIAG);
- bnx2_set_mac_loopback(bp);
+ if (loopback_mode == BNX2_MAC_LOOPBACK) {
+ bp->loopback = MAC_LOOPBACK;
+ bnx2_set_mac_loopback(bp);
+ }
+ else if (loopback_mode == BNX2_PHY_LOOPBACK) {
+ bp->loopback = 0;
+ bnx2_set_phy_loopback(bp);
+ }
+ else
+ return -EINVAL;
pkt_size = 1514;
skb = dev_alloc_skb(pkt_size);
@@ -3921,11 +3987,9 @@
udelay(5);
rx_start_idx = bp->status_blk->status_rx_quick_consumer_index0;
- send_idx = 0;
- send_bseq = 0;
num_pkts = 0;
- txbd = &bp->tx_desc_ring[send_idx];
+ txbd = &bp->tx_desc_ring[TX_RING_IDX(bp->tx_prod)];
txbd->tx_bd_haddr_hi = (u64) map >> 32;
txbd->tx_bd_haddr_lo = (u64) map & 0xffffffff;
@@ -3933,13 +3997,11 @@
txbd->tx_bd_vlan_tag_flags = TX_BD_FLAGS_START | TX_BD_FLAGS_END;
num_pkts++;
- send_idx = NEXT_TX_BD(send_idx);
+ bp->tx_prod = NEXT_TX_BD(bp->tx_prod);
+ bp->tx_prod_bseq += pkt_size;
- send_bseq += pkt_size;
-
- REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, send_idx);
- REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, send_bseq);
-
+ REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, bp->tx_prod);
+ REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, bp->tx_prod_bseq);
udelay(100);
@@ -3952,7 +4014,7 @@
pci_unmap_single(bp->pdev, map, pkt_size, PCI_DMA_TODEVICE);
dev_kfree_skb_irq(skb);
- if (bp->status_blk->status_tx_quick_consumer_index0 != send_idx) {
+ if (bp->status_blk->status_tx_quick_consumer_index0 != bp->tx_prod) {
goto loopback_test_done;
}
@@ -3971,7 +4033,7 @@
pci_unmap_addr(rx_buf, mapping),
bp->rx_buf_size, PCI_DMA_FROMDEVICE);
- if (rx_hdr->l2_fhdr_errors &
+ if (rx_hdr->l2_fhdr_status &
(L2_FHDR_ERRORS_BAD_CRC |
L2_FHDR_ERRORS_PHY_DECODE |
L2_FHDR_ERRORS_ALIGNMENT |
@@ -3998,6 +4060,30 @@
return ret;
}
+#define BNX2_MAC_LOOPBACK_FAILED 1
+#define BNX2_PHY_LOOPBACK_FAILED 2
+#define BNX2_LOOPBACK_FAILED (BNX2_MAC_LOOPBACK_FAILED | \
+ BNX2_PHY_LOOPBACK_FAILED)
+
+static int
+bnx2_test_loopback(struct bnx2 *bp)
+{
+ int rc = 0;
+
+ if (!netif_running(bp->dev))
+ return BNX2_LOOPBACK_FAILED;
+
+ bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_RESET);
+ spin_lock_bh(&bp->phy_lock);
+ bnx2_init_phy(bp);
+ spin_unlock_bh(&bp->phy_lock);
+ if (bnx2_run_loopback(bp, BNX2_MAC_LOOPBACK))
+ rc |= BNX2_MAC_LOOPBACK_FAILED;
+ if (bnx2_run_loopback(bp, BNX2_PHY_LOOPBACK))
+ rc |= BNX2_PHY_LOOPBACK_FAILED;
+ return rc;
+}
+
#define NVRAM_SIZE 0x200
#define CRC32_RESIDUAL 0xdebb20e3
@@ -4167,7 +4253,7 @@
static int
bnx2_open(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
int rc;
bnx2_set_power_state(bp, PCI_D0);
@@ -4280,7 +4366,7 @@
static void
bnx2_tx_timeout(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
/* This allows the netif to be shutdown gracefully before resetting */
schedule_work(&bp->reset_task);
@@ -4291,7 +4377,7 @@
static void
bnx2_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
bnx2_netif_stop(bp);
@@ -4305,7 +4391,7 @@
static void
bnx2_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
bnx2_netif_stop(bp);
@@ -4326,7 +4412,7 @@
static int
bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
dma_addr_t mapping;
struct tx_bd *txbd;
struct sw_bd *tx_buf;
@@ -4455,7 +4541,7 @@
static int
bnx2_close(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
u32 reset_code;
/* Calling flush_scheduled_work() may deadlock because
@@ -4467,7 +4553,9 @@
bnx2_netif_stop(bp);
del_timer_sync(&bp->timer);
- if (bp->wol)
+ if (bp->flags & NO_WOL_FLAG)
+ reset_code = BNX2_DRV_MSG_CODE_UNLOAD;
+ else if (bp->wol)
reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL;
else
reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
@@ -4501,7 +4589,7 @@
static struct net_device_stats *
bnx2_get_stats(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
struct statistics_block *stats_blk = bp->stats_blk;
struct net_device_stats *net_stats = &bp->net_stats;
@@ -4575,7 +4663,7 @@
static int
bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
cmd->supported = SUPPORTED_Autoneg;
if (bp->phy_flags & PHY_SERDES_FLAG) {
@@ -4622,7 +4710,7 @@
static int
bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
u8 autoneg = bp->autoneg;
u8 req_duplex = bp->req_duplex;
u16 req_line_speed = bp->req_line_speed;
@@ -4694,7 +4782,7 @@
static void
bnx2_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
strcpy(info->driver, DRV_MODULE_NAME);
strcpy(info->version, DRV_MODULE_VERSION);
@@ -4702,15 +4790,14 @@
info->fw_version[0] = ((bp->fw_ver & 0xff000000) >> 24) + '0';
info->fw_version[2] = ((bp->fw_ver & 0xff0000) >> 16) + '0';
info->fw_version[4] = ((bp->fw_ver & 0xff00) >> 8) + '0';
- info->fw_version[6] = (bp->fw_ver & 0xff) + '0';
- info->fw_version[1] = info->fw_version[3] = info->fw_version[5] = '.';
- info->fw_version[7] = 0;
+ info->fw_version[1] = info->fw_version[3] = '.';
+ info->fw_version[5] = 0;
}
static void
bnx2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
if (bp->flags & NO_WOL_FLAG) {
wol->supported = 0;
@@ -4729,7 +4816,7 @@
static int
bnx2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
if (wol->wolopts & ~WAKE_MAGIC)
return -EINVAL;
@@ -4749,7 +4836,7 @@
static int
bnx2_nway_reset(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
u32 bmcr;
if (!(bp->autoneg & AUTONEG_SPEED)) {
@@ -4785,19 +4872,19 @@
static int
bnx2_get_eeprom_len(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
- if (bp->flash_info == 0)
+ if (bp->flash_info == NULL)
return 0;
- return (int) bp->flash_info->total_size;
+ return (int) bp->flash_size;
}
static int
bnx2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
u8 *eebuf)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
int rc;
/* parameters already validated in ethtool_get_eeprom */
@@ -4811,7 +4898,7 @@
bnx2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
u8 *eebuf)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
int rc;
/* parameters already validated in ethtool_set_eeprom */
@@ -4824,7 +4911,7 @@
static int
bnx2_get_coalesce(struct net_device *dev, struct ethtool_coalesce *coal)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
memset(coal, 0, sizeof(struct ethtool_coalesce));
@@ -4846,7 +4933,7 @@
static int
bnx2_set_coalesce(struct net_device *dev, struct ethtool_coalesce *coal)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
bp->rx_ticks = (u16) coal->rx_coalesce_usecs;
if (bp->rx_ticks > 0x3ff) bp->rx_ticks = 0x3ff;
@@ -4890,7 +4977,7 @@
static void
bnx2_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
ering->rx_max_pending = MAX_RX_DESC_CNT;
ering->rx_mini_max_pending = 0;
@@ -4907,7 +4994,7 @@
static int
bnx2_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
if ((ering->rx_pending > MAX_RX_DESC_CNT) ||
(ering->tx_pending > MAX_TX_DESC_CNT) ||
@@ -4930,7 +5017,7 @@
static void
bnx2_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
epause->autoneg = ((bp->autoneg & AUTONEG_FLOW_CTRL) != 0);
epause->rx_pause = ((bp->flow_ctrl & FLOW_CTRL_RX) != 0);
@@ -4940,7 +5027,7 @@
static int
bnx2_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
bp->req_flow_ctrl = 0;
if (epause->rx_pause)
@@ -4967,7 +5054,7 @@
static u32
bnx2_get_rx_csum(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
return bp->rx_csum;
}
@@ -4975,7 +5062,7 @@
static int
bnx2_set_rx_csum(struct net_device *dev, u32 data)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
bp->rx_csum = data;
return 0;
@@ -5124,7 +5211,7 @@
static void
bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
memset(buf, 0, sizeof(u64) * BNX2_NUM_TESTS);
if (etest->flags & ETH_TEST_FL_OFFLINE) {
@@ -5140,10 +5227,8 @@
buf[1] = 1;
etest->flags |= ETH_TEST_FL_FAILED;
}
- if (bnx2_test_loopback(bp) != 0) {
- buf[2] = 1;
+ if ((buf[2] = bnx2_test_loopback(bp)) != 0)
etest->flags |= ETH_TEST_FL_FAILED;
- }
if (!netif_running(bp->dev)) {
bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET);
@@ -5200,7 +5285,7 @@
bnx2_get_ethtool_stats(struct net_device *dev,
struct ethtool_stats *stats, u64 *buf)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
int i;
u32 *hw_stats = (u32 *) bp->stats_blk;
u8 *stats_len_arr = NULL;
@@ -5240,7 +5325,7 @@
static int
bnx2_phys_id(struct net_device *dev, u32 data)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
int i;
u32 save;
@@ -5312,7 +5397,7 @@
bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct mii_ioctl_data *data = if_mii(ifr);
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
int err;
switch(cmd) {
@@ -5354,7 +5439,7 @@
bnx2_change_mac_addr(struct net_device *dev, void *p)
{
struct sockaddr *addr = p;
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
if (!is_valid_ether_addr(addr->sa_data))
return -EINVAL;
@@ -5370,7 +5455,7 @@
static int
bnx2_change_mtu(struct net_device *dev, int new_mtu)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
if (((new_mtu + ETH_HLEN) > MAX_ETHERNET_JUMBO_PACKET_SIZE) ||
((new_mtu + ETH_HLEN) < MIN_ETHERNET_PACKET_SIZE))
@@ -5391,7 +5476,7 @@
static void
poll_bnx2(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
disable_irq(bp->pdev->irq);
bnx2_interrupt(bp->pdev->irq, dev, NULL);
@@ -5409,7 +5494,7 @@
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
- bp = dev->priv;
+ bp = netdev_priv(dev);
bp->flags = 0;
bp->phy_flags = 0;
@@ -5629,6 +5714,9 @@
}
}
+ if (CHIP_NUM(bp) == CHIP_NUM_5708)
+ bp->flags |= NO_WOL_FLAG;
+
if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
bp->tx_quick_cons_trip_int =
bp->tx_quick_cons_trip;
@@ -5725,7 +5813,7 @@
dev->ethtool_ops = &bnx2_ethtool_ops;
dev->weight = 64;
- bp = dev->priv;
+ bp = netdev_priv(dev);
#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
dev->poll_controller = poll_bnx2;
@@ -5784,7 +5872,7 @@
bnx2_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
flush_scheduled_work();
@@ -5803,7 +5891,7 @@
bnx2_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
u32 reset_code;
if (!netif_running(dev))
@@ -5812,7 +5900,9 @@
bnx2_netif_stop(bp);
netif_device_detach(dev);
del_timer_sync(&bp->timer);
- if (bp->wol)
+ if (bp->flags & NO_WOL_FLAG)
+ reset_code = BNX2_DRV_MSG_CODE_UNLOAD;
+ else if (bp->wol)
reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL;
else
reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
@@ -5826,7 +5916,7 @@
bnx2_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
if (!netif_running(dev))
return 0;
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 76bb5f1..9f691cb 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -1,6 +1,6 @@
/* bnx2.h: Broadcom NX2 network driver.
*
- * Copyright (c) 2004, 2005 Broadcom Corporation
+ * Copyright (c) 2004, 2005, 2006 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -277,19 +277,7 @@
* l2_fhdr definition
*/
struct l2_fhdr {
-#if defined(__BIG_ENDIAN)
- u16 l2_fhdr_errors;
- u16 l2_fhdr_status;
-#elif defined(__LITTLE_ENDIAN)
- u16 l2_fhdr_status;
- u16 l2_fhdr_errors;
-#endif
- #define L2_FHDR_ERRORS_BAD_CRC (1<<1)
- #define L2_FHDR_ERRORS_PHY_DECODE (1<<2)
- #define L2_FHDR_ERRORS_ALIGNMENT (1<<3)
- #define L2_FHDR_ERRORS_TOO_SHORT (1<<4)
- #define L2_FHDR_ERRORS_GIANT_FRAME (1<<5)
-
+ u32 l2_fhdr_status;
#define L2_FHDR_STATUS_RULE_CLASS (0x7<<0)
#define L2_FHDR_STATUS_RULE_P2 (1<<3)
#define L2_FHDR_STATUS_RULE_P3 (1<<4)
@@ -301,6 +289,14 @@
#define L2_FHDR_STATUS_TCP_SEGMENT (1<<14)
#define L2_FHDR_STATUS_UDP_DATAGRAM (1<<15)
+ #define L2_FHDR_ERRORS_BAD_CRC (1<<17)
+ #define L2_FHDR_ERRORS_PHY_DECODE (1<<18)
+ #define L2_FHDR_ERRORS_ALIGNMENT (1<<19)
+ #define L2_FHDR_ERRORS_TOO_SHORT (1<<20)
+ #define L2_FHDR_ERRORS_GIANT_FRAME (1<<21)
+ #define L2_FHDR_ERRORS_TCP_XSUM (1<<28)
+ #define L2_FHDR_ERRORS_UDP_XSUM (1<<31)
+
u32 l2_fhdr_hash;
#if defined(__BIG_ENDIAN)
u16 l2_fhdr_pkt_len;
@@ -3956,6 +3952,7 @@
#define NO_WOL_FLAG 8
#define USING_DAC_FLAG 0x10
#define USING_MSI_FLAG 0x20
+#define ASF_ENABLE_FLAG 0x40
u32 phy_flags;
#define PHY_SERDES_FLAG 1
@@ -3986,6 +3983,7 @@
#define CHIP_ID_5706_A2 0x57060020
#define CHIP_ID_5708_A0 0x57080000
#define CHIP_ID_5708_B0 0x57081000
+#define CHIP_ID_5708_B1 0x57081010
#define CHIP_BOND_ID(bp) (((bp)->chip_id) & 0xf)
@@ -3998,7 +3996,7 @@
u16 bus_speed_mhz;
u8 wol;
- u8 fw_timed_out;
+ u8 pad;
u16 fw_wr_seq;
u16 fw_drv_pulse_wr_seq;
@@ -4074,6 +4072,7 @@
struct net_device_stats net_stats;
struct flash_spec *flash_info;
+ u32 flash_size;
};
static u32 bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset);
@@ -4172,7 +4171,7 @@
* the firmware has timed out, the driver will assume there is no firmware
* running and there won't be any firmware-driver synchronization during a
* driver reset. */
-#define FW_ACK_TIME_OUT_MS 50
+#define FW_ACK_TIME_OUT_MS 100
#define BNX2_DRV_RESET_SIGNATURE 0x00000000
@@ -4275,6 +4274,9 @@
#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY1 0x100
#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY2 0x200
+#define BNX2_SHARED_HW_CFG_CONFIG2 0x00000040
+#define BNX2_SHARED_HW_CFG2_NVM_SIZE_MASK 0x00fff000
+
#define BNX2_DEV_INFO_BC_REV 0x0000004c
#define BNX2_PORT_HW_CFG_MAC_UPPER 0x00000050
diff --git a/drivers/net/bnx2_fw.h b/drivers/net/bnx2_fw.h
index ab07a49..0c21bd8 100644
--- a/drivers/net/bnx2_fw.h
+++ b/drivers/net/bnx2_fw.h
@@ -1,6 +1,6 @@
/* bnx2_fw.h: Broadcom NX2 network driver.
*
- * Copyright (c) 2004, 2005 Broadcom Corporation
+ * Copyright (c) 2004, 2005, 2006 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -978,20 +978,20 @@
static int bnx2_RXP_b06FwReleaseMajor = 0x1;
static int bnx2_RXP_b06FwReleaseMinor = 0x0;
static int bnx2_RXP_b06FwReleaseFix = 0x0;
-static u32 bnx2_RXP_b06FwStartAddr = 0x08003104;
+static u32 bnx2_RXP_b06FwStartAddr = 0x08003184;
static u32 bnx2_RXP_b06FwTextAddr = 0x08000000;
-static int bnx2_RXP_b06FwTextLen = 0x562c;
-static u32 bnx2_RXP_b06FwDataAddr = 0x08005660;
+static int bnx2_RXP_b06FwTextLen = 0x588c;
+static u32 bnx2_RXP_b06FwDataAddr = 0x080058e0;
static int bnx2_RXP_b06FwDataLen = 0x0;
-static u32 bnx2_RXP_b06FwRodataAddr = 0x00000000;
-static int bnx2_RXP_b06FwRodataLen = 0x0;
-static u32 bnx2_RXP_b06FwBssAddr = 0x08005680;
-static int bnx2_RXP_b06FwBssLen = 0x1394;
-static u32 bnx2_RXP_b06FwSbssAddr = 0x08005660;
-static int bnx2_RXP_b06FwSbssLen = 0x18;
-static u32 bnx2_RXP_b06FwText[(0x562c/4) + 1] = {
- 0x0a000c41, 0x00000000, 0x00000000, 0x0000000d, 0x72787020, 0x322e352e,
- 0x38000000, 0x02050803, 0x00000000, 0x0000000d, 0x00000000, 0x00000000,
+static u32 bnx2_RXP_b06FwRodataAddr = 0x08005890;
+static int bnx2_RXP_b06FwRodataLen = 0x28;
+static u32 bnx2_RXP_b06FwBssAddr = 0x08005900;
+static int bnx2_RXP_b06FwBssLen = 0x13a4;
+static u32 bnx2_RXP_b06FwSbssAddr = 0x080058e0;
+static int bnx2_RXP_b06FwSbssLen = 0x1c;
+static u32 bnx2_RXP_b06FwText[(0x588c/4) + 1] = {
+ 0x0a000c61, 0x00000000, 0x00000000, 0x0000000d, 0x72787020, 0x322e362e,
+ 0x31000000, 0x02060103, 0x00000000, 0x0000000d, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
@@ -1513,408 +1513,435 @@
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- 0x10000003, 0x00000000, 0x0000000d, 0x0000000d, 0x3c020800, 0x24425660,
- 0x3c030800, 0x24636a14, 0xac400000, 0x0043202b, 0x1480fffd, 0x24420004,
- 0x3c1d0800, 0x37bd7ffc, 0x03a0f021, 0x3c100800, 0x26103104, 0x3c1c0800,
- 0x279c5660, 0x0e001035, 0x00000000, 0x0000000d, 0x3c080800, 0x8d023100,
- 0x2c420080, 0x50400001, 0xad003100, 0x8d073100, 0x3c040800, 0x24840100,
- 0x8f460100, 0x00071840, 0x00671821, 0x00031940, 0x00641021, 0xac460000,
- 0x8f450104, 0x00831021, 0xac450004, 0x8f460108, 0xac460008, 0x8f45010c,
- 0xac45000c, 0x8f460114, 0xac460010, 0x8f450118, 0xac450014, 0x8f460124,
- 0xac460018, 0x8f450128, 0xac45001c, 0x8f464010, 0xac460020, 0x8f454014,
- 0xac450024, 0x8f464018, 0xac460028, 0x8f45401c, 0xac45002c, 0x8f464020,
- 0xac460030, 0x8f454024, 0xac450034, 0x8f464028, 0xac460038, 0x8f45402c,
- 0xac45003c, 0x8f464030, 0xac460040, 0x8f454034, 0xac450044, 0x8f464038,
- 0xac460048, 0x8f45403c, 0xac45004c, 0x8f464040, 0xac460050, 0x8f454044,
- 0xac450054, 0x8f464048, 0xac460058, 0x8f45404c, 0x24e70001, 0x00402021,
- 0xad073100, 0x03e00008, 0xac85005c, 0x8f820004, 0x9743010c, 0x00804821,
- 0x00403021, 0x30421000, 0x10400010, 0x306affff, 0x30c20020, 0x1440000e,
- 0x24070005, 0x3c021000, 0x00c21024, 0x10400009, 0x3c030dff, 0x3463ffff,
- 0x3c020e00, 0x00c21024, 0x0062182b, 0x50600004, 0x24070001, 0x0a000cb1,
- 0x3c020800, 0x24070001, 0x3c020800, 0x8c430034, 0x1460001d, 0x00405821,
- 0x8f820010, 0x30424000, 0x1440001a, 0x3c020001, 0x3c021f01, 0x00c24024,
- 0x3c031000, 0x15030015, 0x3c020001, 0x31420200, 0x54400012, 0x3c020001,
- 0x9744010e, 0x24020003, 0xa342018b, 0x97850012, 0x24020002, 0x34e30002,
- 0xaf400180, 0xa742018c, 0xa7430188, 0x24840004, 0x30a5bfff, 0xa744018e,
- 0xa74501a6, 0xaf4801b8, 0x03e00008, 0x00001021, 0x3c020001, 0x00c21024,
- 0x10400039, 0x00000000, 0x9742010e, 0x3c038000, 0x3046ffff, 0x8f4201b8,
- 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x97840006, 0x8f85000c,
- 0x24020080, 0x24030002, 0xaf420180, 0xa743018c, 0xa746018e, 0x10a00005,
- 0xa7440190, 0x9743011c, 0x9742011e, 0x0a000cec, 0x00021400, 0x9743011e,
- 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f840010, 0x24020003,
- 0x30838000, 0x1060000d, 0xa7420188, 0x93420116, 0x304200fc, 0x005a1021,
- 0x24424004, 0x8c430000, 0x3063ffff, 0x14600005, 0x00000000, 0x3c02ffff,
- 0x34427fff, 0x00821024, 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104,
- 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac,
- 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x8f820010, 0x30434000,
- 0x10600016, 0x00404021, 0x3c020f00, 0x00c21024, 0x14400012, 0x00000000,
- 0x93420116, 0x34424000, 0x03421821, 0x94650002, 0x2ca21389, 0x1040000b,
- 0x3c020800, 0x24425680, 0x00051942, 0x00031880, 0x00621821, 0x30a5001f,
- 0x8c640000, 0x24020001, 0x00a21004, 0x00822024, 0x01244825, 0x11200039,
- 0x3c021000, 0x9742010e, 0x34e70002, 0x3c038000, 0x24420004, 0x3046ffff,
- 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x97840006,
- 0x8f85000c, 0x24020180, 0x24030002, 0xaf420180, 0xa743018c, 0xa746018e,
- 0x10a00005, 0xa7440190, 0x9743011c, 0x9742011e, 0x0a000d41, 0x00021400,
- 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f840010,
- 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021,
- 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
- 0x00821024, 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104, 0x3042bfff,
- 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
- 0xaf4201b8, 0x03e00008, 0x00001021, 0x00c21024, 0x104000e3, 0x3c020800,
- 0x8c430030, 0x10600040, 0x31024000, 0x1040003e, 0x3c030f00, 0x00c31824,
- 0x3c020100, 0x0043102b, 0x1440003a, 0x3c030800, 0x9742010e, 0x34e70002,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x10000003, 0x00000000, 0x0000000d, 0x0000000d,
+ 0x3c020800, 0x244258e0, 0x3c030800, 0x24636ca4, 0xac400000, 0x0043202b,
+ 0x1480fffd, 0x24420004, 0x3c1d0800, 0x37bd7ffc, 0x03a0f021, 0x3c100800,
+ 0x26103184, 0x3c1c0800, 0x279c58e0, 0x0e00104a, 0x00000000, 0x0000000d,
+ 0x27bdffe8, 0xafb00010, 0xafbf0014, 0x0e000f1d, 0x00808021, 0x1440000d,
+ 0x00000000, 0x8f820010, 0x10400005, 0x00000000, 0x9743011c, 0x9742011e,
+ 0x0a000c89, 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825,
+ 0xaf830004, 0x8f840008, 0x3c020020, 0x34424000, 0x00821824, 0x54620004,
+ 0x3c020020, 0x8f820014, 0x0a000c9a, 0x34421000, 0x34428000, 0x00821824,
+ 0x14620004, 0x00000000, 0x8f820014, 0x34428000, 0xaf820014, 0x8f820008,
+ 0x9743010c, 0x00403021, 0x30421000, 0x10400010, 0x3069ffff, 0x30c20020,
+ 0x1440000e, 0x24070005, 0x3c021000, 0x00c21024, 0x10400009, 0x3c030dff,
+ 0x3463ffff, 0x3c020e00, 0x00c21024, 0x0062182b, 0x50600004, 0x24070001,
+ 0x0a000cb2, 0x3c020800, 0x24070001, 0x3c020800, 0x8c430034, 0x1460001d,
+ 0x00405821, 0x8f820014, 0x30424000, 0x1440001a, 0x3c020001, 0x3c021f01,
+ 0x00c24024, 0x3c031000, 0x15030015, 0x3c020001, 0x31220200, 0x14400012,
+ 0x3c020001, 0x9744010e, 0x24020003, 0xa342018b, 0x97850016, 0x24020002,
+ 0x34e30002, 0xaf400180, 0xa742018c, 0xa7430188, 0x24840004, 0x30a5bfff,
+ 0xa744018e, 0xa74501a6, 0xaf4801b8, 0x0a000f19, 0x00001021, 0x3c020001,
+ 0x00c21024, 0x1040002f, 0x00000000, 0x9742010e, 0x3c038000, 0x3046ffff,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x9784000a,
+ 0x8f850004, 0x8f870014, 0x24020080, 0x24030002, 0xaf420180, 0x24020003,
+ 0xa743018c, 0xa746018e, 0xa7420188, 0x30e28000, 0xa7440190, 0x1040000c,
+ 0xaf4501a8, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000,
+ 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00e21024, 0xaf820014,
+ 0x97820016, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff,
+ 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x0a000f19,
+ 0x00001021, 0x8f820014, 0x30434000, 0x10600016, 0x00404021, 0x3c020f00,
+ 0x00c21024, 0x14400012, 0x00000000, 0x93420116, 0x34424000, 0x03421821,
+ 0x94650002, 0x2ca21389, 0x1040000b, 0x3c020800, 0x24425900, 0x00051942,
+ 0x00031880, 0x00621821, 0x30a5001f, 0x8c640000, 0x24020001, 0x00a21004,
+ 0x00822024, 0x02048025, 0x12000030, 0x3c021000, 0x9742010e, 0x34e80002,
0x3c038000, 0x24420004, 0x3046ffff, 0x8f4201b8, 0x00431024, 0x1440fffd,
- 0x24020003, 0xa342018b, 0x97840006, 0x8f85000c, 0x24020080, 0x24030002,
- 0xaf420180, 0xa743018c, 0xa746018e, 0x10a00005, 0xa7440190, 0x9743011c,
- 0x9742011e, 0x0a000d86, 0x00021400, 0x9743011e, 0x9742011c, 0x00021400,
- 0x00621825, 0xaf4301a8, 0x8f840010, 0x30828000, 0x1040000c, 0xa7470188,
- 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff,
- 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf820010, 0x97820012,
- 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825,
- 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021,
- 0x3c030800, 0x8c620024, 0x30420008, 0x1040003e, 0x34e80002, 0x3c020f00,
- 0x00c21024, 0x1440003b, 0x8d620034, 0x31420200, 0x10400038, 0x8d620034,
- 0x9742010e, 0x30e7fffb, 0x3c038000, 0x24420004, 0x3046ffff, 0x8f4201b8,
- 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x97840006, 0x8f85000c,
- 0x24020180, 0x24030002, 0xaf420180, 0xa743018c, 0xa746018e, 0x10a00005,
- 0xa7440190, 0x9743011c, 0x9742011e, 0x0a000dca, 0x00021400, 0x9743011e,
- 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f840010, 0x30828000,
- 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004,
- 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024,
- 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00,
- 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8,
- 0x8d620034, 0x8f860004, 0x1040001a, 0x30c20100, 0x10400018, 0x3c020f00,
- 0x00c21024, 0x3c030200, 0x10430014, 0x00000000, 0x8f82000c, 0x10400004,
- 0x00000000, 0x9742011c, 0x0a000df8, 0x3044ffff, 0x9742011e, 0x3044ffff,
- 0x3c030800, 0x8c620038, 0x3c030800, 0x2463003c, 0x2442ffff, 0x00822024,
- 0x00831821, 0x90620000, 0x24420004, 0x0a000e0d, 0x000229c0, 0x00000000,
- 0x00061602, 0x3042000f, 0x000229c0, 0x3c04fc00, 0x00441021, 0x3c030300,
- 0x0062182b, 0x50600001, 0x24050800, 0x9742010e, 0x3107ffff, 0x3c038000,
+ 0x24020003, 0xa342018b, 0x9784000a, 0x8f850004, 0x8f870014, 0x24020180,
+ 0x24030002, 0xaf420180, 0xa743018c, 0xa746018e, 0xa7480188, 0x30e28000,
+ 0xa7440190, 0x1040000c, 0xaf4501a8, 0x93420116, 0x304200fc, 0x005a1021,
+ 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
+ 0x00e21024, 0xaf820014, 0x97820016, 0x9743010c, 0x8f440104, 0x3042bfff,
+ 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
+ 0xaf4201b8, 0x0a000f19, 0x00001021, 0x00c21024, 0x104000c0, 0x3c020800,
+ 0x8c430030, 0x10600037, 0x31024000, 0x10400035, 0x3c030f00, 0x00c31824,
+ 0x3c020100, 0x0043102b, 0x14400031, 0x3c030800, 0x9742010e, 0x34e80002,
+ 0x3c038000, 0x24420004, 0x3046ffff, 0x8f4201b8, 0x00431024, 0x1440fffd,
+ 0x24020003, 0xa342018b, 0x9784000a, 0x8f850004, 0x8f870014, 0x24020080,
+ 0x24030002, 0xaf420180, 0xa743018c, 0xa746018e, 0xa7480188, 0x30e28000,
+ 0xa7440190, 0x1040000c, 0xaf4501a8, 0x93420116, 0x304200fc, 0x005a1021,
+ 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
+ 0x00e21024, 0xaf820014, 0x97820016, 0x9743010c, 0x8f440104, 0x3042bfff,
+ 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
+ 0xaf4201b8, 0x0a000f19, 0x00001021, 0x3c030800, 0x8c620024, 0x30420008,
+ 0x10400035, 0x34ea0002, 0x3c020f00, 0x00c21024, 0x14400032, 0x8d620034,
+ 0x31220200, 0x1040002f, 0x8d620034, 0x9742010e, 0x30e8fffb, 0x3c038000,
0x24420004, 0x3046ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003,
- 0xa342018b, 0x97830006, 0x8f84000c, 0x24020002, 0xaf450180, 0xa742018c,
- 0xa746018e, 0x10800005, 0xa7430190, 0x9743011c, 0x9742011e, 0x0a000e26,
- 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8,
- 0x8f840010, 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc,
- 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff,
- 0x34427fff, 0x00821024, 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104,
- 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac,
- 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x8f424000, 0x30420100,
- 0x104000f9, 0x3c020800, 0x8c440024, 0x24030001, 0x14830038, 0x00404821,
- 0x9742010e, 0x34e60002, 0x3c038000, 0x24420004, 0x3045ffff, 0x8f4201b8,
- 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x97830006, 0x8f84000c,
- 0x24020002, 0xaf400180, 0xa742018c, 0xa745018e, 0x10800005, 0xa7430190,
- 0x9743011c, 0x9742011e, 0x0a000e65, 0x00021400, 0x9743011e, 0x9742011c,
- 0x00021400, 0x00621825, 0xaf4301a8, 0x8f840010, 0x30828000, 0x1040000c,
- 0xa7460188, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000,
- 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf820010,
- 0x97820012, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff,
- 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x03e00008,
- 0x00001021, 0x30820001, 0x10400037, 0x30ea0004, 0x9742010e, 0x30e8fffb,
- 0x3c038000, 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd,
- 0x24020003, 0xa342018b, 0x97830006, 0x8f84000c, 0x24020002, 0xaf400180,
- 0xa742018c, 0xa745018e, 0x10800005, 0xa7430190, 0x9743011c, 0x9742011e,
- 0x0a000e9f, 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825,
- 0xaf4301a8, 0x8f840010, 0x30828000, 0x1040000c, 0xa7470188, 0x93420116,
- 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004,
- 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf820010, 0x97820012, 0x9743010c,
- 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6,
- 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x3107ffff, 0x8d220024, 0x30420004,
- 0x10400039, 0x8d220024, 0x9742010e, 0x30e8fffb, 0x3c038000, 0x24420004,
- 0x3046ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b,
- 0x97840006, 0x8f85000c, 0x24020100, 0x24030002, 0xaf420180, 0xa743018c,
- 0xa746018e, 0x10a00005, 0xa7440190, 0x9743011c, 0x9742011e, 0x0a000eda,
- 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8,
- 0x8f840010, 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc,
- 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff,
- 0x34427fff, 0x00821024, 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104,
- 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac,
- 0x3c021000, 0xaf4201b8, 0x3107ffff, 0x8d220024, 0x30420008, 0x10400036,
- 0x00000000, 0x9742010e, 0x3c038000, 0x24420004, 0x3046ffff, 0x8f4201b8,
- 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x97840006, 0x8f85000c,
- 0x24020180, 0x24030002, 0xaf420180, 0xa743018c, 0xa746018e, 0x10a00005,
- 0xa7440190, 0x9743011c, 0x9742011e, 0x0a000f14, 0x00021400, 0x9743011e,
- 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f840010, 0x30828000,
- 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004,
- 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024,
- 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00,
+ 0xa342018b, 0x9784000a, 0x8f850004, 0x8f870014, 0x24020180, 0x24030002,
+ 0xaf420180, 0xa743018c, 0xa746018e, 0xa7480188, 0x30e28000, 0xa7440190,
+ 0x1040000c, 0xaf4501a8, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004,
+ 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00e21024,
+ 0xaf820014, 0x97820016, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00,
0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8,
- 0x1540004a, 0x00001021, 0x27440180, 0x3c038000, 0x8f4201b8, 0x00431024,
- 0x1440fffd, 0x24022000, 0x24030002, 0xa4820008, 0xa083000b, 0xa4800010,
- 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x3c030800, 0x8c620024,
- 0x30420001, 0x10400037, 0x00001021, 0x9742010e, 0x34e60002, 0x3c038000,
- 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003,
- 0xa342018b, 0x97830006, 0x8f84000c, 0x24020002, 0xaf400180, 0xa742018c,
- 0xa745018e, 0x10800005, 0xa7430190, 0x9743011c, 0x9742011e, 0x0a000f5e,
- 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8,
- 0x8f840010, 0x30828000, 0x1040000c, 0xa7460188, 0x93420116, 0x304200fc,
+ 0x8d620034, 0x8f860008, 0x10400012, 0x30c20100, 0x10400010, 0x3c020f00,
+ 0x00c21024, 0x3c030200, 0x1043000c, 0x3c020800, 0x8c430038, 0x8f840004,
+ 0x3c020800, 0x2442003c, 0x2463ffff, 0x00832024, 0x00822021, 0x90830000,
+ 0x24630004, 0x0a000de1, 0x000329c0, 0x00000000, 0x00061602, 0x3042000f,
+ 0x000229c0, 0x3c04fc00, 0x00441021, 0x3c030300, 0x0062182b, 0x50600001,
+ 0x24050800, 0x9742010e, 0x3148ffff, 0x3c038000, 0x24420004, 0x3046ffff,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x9783000a,
+ 0x8f840004, 0x8f870014, 0x24020002, 0xaf450180, 0xa742018c, 0xa746018e,
+ 0xa7480188, 0x30e28000, 0xa7430190, 0x1040000c, 0xaf4401a8, 0x93420116,
+ 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004,
+ 0x3c02ffff, 0x34427fff, 0x00e21024, 0xaf820014, 0x97820016, 0x9743010c,
+ 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6,
+ 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x0a000f19, 0x00001021, 0x8f424000,
+ 0x30420100, 0x104000d5, 0x3c020800, 0x8c440024, 0x24030001, 0x1483002f,
+ 0x00405021, 0x9742010e, 0x34e70002, 0x3c038000, 0x24420004, 0x3045ffff,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x9783000a,
+ 0x8f840004, 0x8f860014, 0x24020002, 0xaf400180, 0xa742018c, 0xa745018e,
+ 0xa7470188, 0x30c28000, 0xa7430190, 0x1040000c, 0xaf4401a8, 0x93420116,
+ 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004,
+ 0x3c02ffff, 0x34427fff, 0x00c21024, 0xaf820014, 0x97820016, 0x9743010c,
+ 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6,
+ 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x0a000f19, 0x00001021, 0x30820001,
+ 0x1040002e, 0x30eb0004, 0x9742010e, 0x30e9fffb, 0x3c038000, 0x24420004,
+ 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b,
+ 0x9783000a, 0x8f840004, 0x8f860014, 0x24020002, 0xaf400180, 0xa742018c,
+ 0xa745018e, 0xa7470188, 0x30c28000, 0xa7430190, 0x1040000c, 0xaf4401a8,
+ 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff,
+ 0x14600004, 0x3c02ffff, 0x34427fff, 0x00c21024, 0xaf820014, 0x97820016,
+ 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825,
+ 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x3127ffff, 0x8d420024,
+ 0x30420004, 0x10400030, 0x8d420024, 0x9742010e, 0x30e9fffb, 0x3c038000,
+ 0x24420004, 0x3046ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003,
+ 0xa342018b, 0x9784000a, 0x8f850004, 0x8f880014, 0x24020100, 0x24030002,
+ 0xaf420180, 0xa743018c, 0xa746018e, 0xa7470188, 0x31028000, 0xa7440190,
+ 0x1040000c, 0xaf4501a8, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004,
+ 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x01021024,
+ 0xaf820014, 0x97820016, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00,
+ 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8,
+ 0x3127ffff, 0x8d420024, 0x30420008, 0x1040002d, 0x00000000, 0x9742010e,
+ 0x3c038000, 0x24420004, 0x3046ffff, 0x8f4201b8, 0x00431024, 0x1440fffd,
+ 0x24020003, 0xa342018b, 0x9784000a, 0x8f850004, 0x8f880014, 0x24020180,
+ 0x24030002, 0xaf420180, 0xa743018c, 0xa746018e, 0xa7470188, 0x31028000,
+ 0xa7440190, 0x1040000c, 0xaf4501a8, 0x93420116, 0x304200fc, 0x005a1021,
+ 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
+ 0x01021024, 0xaf820014, 0x97820016, 0x9743010c, 0x8f440104, 0x3042bfff,
+ 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
+ 0xaf4201b8, 0x15600041, 0x00001021, 0x27440180, 0x3c038000, 0x8f4201b8,
+ 0x00431024, 0x1440fffd, 0x24022000, 0x24030002, 0xa4820008, 0xa083000b,
+ 0xa4800010, 0x3c021000, 0xaf4201b8, 0x0a000f19, 0x00001021, 0x3c030800,
+ 0x8c620024, 0x30420001, 0x1040002e, 0x00001021, 0x9742010e, 0x34e70002,
+ 0x3c038000, 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd,
+ 0x24020003, 0xa342018b, 0x9783000a, 0x8f840004, 0x8f860014, 0x24020002,
+ 0xaf400180, 0xa742018c, 0xa745018e, 0xa7470188, 0x30c28000, 0xa7430190,
+ 0x1040000c, 0xaf4401a8, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004,
+ 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00c21024,
+ 0xaf820014, 0x97820016, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00,
+ 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8,
+ 0x00001021, 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x8f4b0070,
+ 0x93420112, 0x8f840008, 0x00022882, 0x30820100, 0x14400003, 0x24a30003,
+ 0x03e00008, 0x00001021, 0x30824000, 0x10400010, 0x27424000, 0x00031880,
+ 0x00431021, 0x8c470000, 0x24a30004, 0x00031880, 0x27424000, 0x00431021,
+ 0x8c490000, 0x93430116, 0x27424000, 0x306300fc, 0x00431021, 0x8c4a0000,
+ 0x0a000f45, 0x3c030800, 0x30822000, 0x1040ffea, 0x00031880, 0x27424000,
+ 0x00431021, 0x8c470000, 0x24a30004, 0x00031880, 0x27424000, 0x00431021,
+ 0x8c490000, 0x00005021, 0x3c030800, 0x24680100, 0x00071602, 0x00021080,
+ 0x00481021, 0x8c460000, 0x00071b82, 0x306303fc, 0x01031821, 0x8c640400,
+ 0x00071182, 0x304203fc, 0x01021021, 0x8c450800, 0x30e300ff, 0x00031880,
+ 0x01031821, 0x00091602, 0x00021080, 0x01021021, 0x00c43026, 0x8c640c00,
+ 0x8c431000, 0x00c53026, 0x00091382, 0x304203fc, 0x01021021, 0x8c451400,
+ 0x312200ff, 0x00021080, 0x01021021, 0x00c43026, 0x00c33026, 0x00091982,
+ 0x306303fc, 0x01031821, 0x8c641800, 0x8c431c00, 0x00c53026, 0x00c43026,
+ 0x11400015, 0x00c33026, 0x000a1602, 0x00021080, 0x01021021, 0x8c432000,
+ 0x000a1382, 0x304203fc, 0x01021021, 0x8c452400, 0x314200ff, 0x00021080,
+ 0x01021021, 0x00c33026, 0x000a1982, 0x306303fc, 0x01031821, 0x8c642800,
+ 0x8c432c00, 0x00c53026, 0x00c43026, 0x00c33026, 0x8f430070, 0x3c050800,
+ 0x8ca43100, 0x2c820020, 0x10400008, 0x006b5823, 0x3c020800, 0x24423104,
+ 0x00041880, 0x00621821, 0x24820001, 0xac6b0000, 0xaca23100, 0xaf860004,
+ 0x03e00008, 0x24020001, 0x27bdffe8, 0xafbf0010, 0x8f460128, 0x8f840010,
+ 0xaf460020, 0x8f450104, 0x8f420100, 0x24030800, 0xaf850008, 0xaf820014,
+ 0xaf4301b8, 0x1080000a, 0x3c020800, 0x8c430034, 0x10600007, 0x30a22000,
+ 0x10400005, 0x34a30100, 0x8f82000c, 0xaf830008, 0x24420001, 0xaf82000c,
+ 0x3c020800, 0x8c4300c0, 0x10600006, 0x3c030800, 0x8c6200c4, 0x24040001,
+ 0x24420001, 0x0a000fd5, 0xac6200c4, 0x8f820008, 0x3c030010, 0x00431024,
+ 0x14400009, 0x3c02001f, 0x3c030800, 0x8c620020, 0x00002021, 0x24420001,
+ 0x0e000c78, 0xac620020, 0x0a000fd5, 0x00402021, 0x3442ff00, 0x14c20009,
+ 0x2403bfff, 0x3c030800, 0x8c620020, 0x24040001, 0x24420001, 0x0e000c78,
+ 0xac620020, 0x0a000fd5, 0x00402021, 0x8f820014, 0x00431024, 0x14400006,
+ 0x00000000, 0xaf400048, 0x0e0011a9, 0xaf400040, 0x0a000fd5, 0x00402021,
+ 0x0e001563, 0x00000000, 0x00402021, 0x10800005, 0x3c024000, 0x8f430124,
+ 0x3c026020, 0xac430014, 0x3c024000, 0xaf420138, 0x00000000, 0x8fbf0010,
+ 0x03e00008, 0x27bd0018, 0x27bdffe0, 0xafbf0018, 0xafb10014, 0xafb00010,
+ 0x8f420140, 0xaf420020, 0x8f430148, 0x3c027000, 0x00621824, 0x3c023000,
+ 0x10620021, 0x0043102b, 0x14400006, 0x3c024000, 0x3c022000, 0x10620009,
+ 0x3c024000, 0x0a001040, 0x00000000, 0x10620045, 0x3c025000, 0x10620047,
+ 0x3c024000, 0x0a001040, 0x00000000, 0x27440180, 0x3c038000, 0x8f4201b8,
+ 0x00431024, 0x1440fffd, 0x00000000, 0x8f420148, 0x24030002, 0xa083000b,
+ 0x00021402, 0xa4820008, 0x8f430148, 0xa4830010, 0x8f420144, 0x3c031000,
+ 0xac820024, 0xaf4301b8, 0x0a001040, 0x3c024000, 0x8f420148, 0x24030002,
+ 0x3044ffff, 0x00021402, 0x305000ff, 0x1203000c, 0x27510180, 0x2a020003,
+ 0x10400005, 0x24020003, 0x0600001d, 0x36053000, 0x0a001027, 0x3c038000,
+ 0x12020007, 0x00000000, 0x0a001034, 0x00000000, 0x0e00112c, 0x00000000,
+ 0x0a001025, 0x00402021, 0x0e00113e, 0x00000000, 0x00402021, 0x36053000,
+ 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002, 0xa6250008,
+ 0xa222000b, 0xa6240010, 0x8f420144, 0x3c031000, 0xae220024, 0xaf4301b8,
+ 0x0a001040, 0x3c024000, 0x0000000d, 0x00000000, 0x240002bf, 0x0a001040,
+ 0x3c024000, 0x0e001441, 0x00000000, 0x0a001040, 0x3c024000, 0x0e0015ea,
+ 0x00000000, 0x3c024000, 0xaf420178, 0x00000000, 0x8fbf0018, 0x8fb10014,
+ 0x8fb00010, 0x03e00008, 0x27bd0020, 0x24020800, 0x03e00008, 0xaf4201b8,
+ 0x27bdffe8, 0x3c04600c, 0xafbf0014, 0xafb00010, 0x8c825000, 0x3c1a8000,
+ 0x2403ff7f, 0x3c106000, 0x00431024, 0x3442380c, 0x24030003, 0xac825000,
+ 0x3c020008, 0xaf430008, 0x8e040808, 0x0342d825, 0x8e020808, 0x3c030800,
+ 0xac600020, 0x3084fff0, 0x2c840001, 0x3042fff0, 0x38420010, 0x2c420001,
+ 0xaf840010, 0xaf820000, 0x0e00160c, 0x00000000, 0x0e001561, 0x00000000,
+ 0x3c020400, 0x3442000c, 0x3c03ffff, 0x34630806, 0xae021948, 0xae03194c,
+ 0x8e021980, 0x34420200, 0xae021980, 0x8f500000, 0x32020003, 0x1040fffd,
+ 0x32020001, 0x10400004, 0x32020002, 0x0e000f92, 0x00000000, 0x32020002,
+ 0x1040fff6, 0x00000000, 0x0e000fe0, 0x00000000, 0x0a001071, 0x00000000,
+ 0x27bdffe8, 0x3c04600c, 0xafbf0014, 0xafb00010, 0x8c825000, 0x3c1a8000,
+ 0x2403ff7f, 0x3c106000, 0x00431024, 0x3442380c, 0x24030003, 0xac825000,
+ 0x3c020008, 0xaf430008, 0x8e040808, 0x0342d825, 0x8e020808, 0x3c030800,
+ 0xac600020, 0x3084fff0, 0x2c840001, 0x3042fff0, 0x38420010, 0x2c420001,
+ 0xaf840010, 0xaf820000, 0x0e00160c, 0x00000000, 0x0e001561, 0x00000000,
+ 0x3c020400, 0x3442000c, 0x3c03ffff, 0x34630806, 0xae021948, 0xae03194c,
+ 0x8e021980, 0x8fbf0014, 0x34420200, 0xae021980, 0x8fb00010, 0x03e00008,
+ 0x27bd0018, 0x00804821, 0x30a5ffff, 0x30c6ffff, 0x30e7ffff, 0x3c038000,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x9783000a,
+ 0x8f840004, 0x8f880014, 0xaf490180, 0xa745018c, 0xa746018e, 0xa7470188,
+ 0x31028000, 0xa7430190, 0x1040000c, 0xaf4401a8, 0x93420116, 0x304200fc,
0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff,
- 0x34427fff, 0x00821024, 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104,
+ 0x34427fff, 0x01021024, 0xaf820014, 0x97820016, 0x9743010c, 0x8f440104,
0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac,
- 0x3c021000, 0xaf4201b8, 0x00001021, 0x03e00008, 0x00000000, 0x27bdffe8,
- 0xafbf0010, 0x8f460128, 0x8f84000c, 0xaf460020, 0x8f450104, 0x8f420100,
- 0x24030800, 0xaf850004, 0xaf820010, 0xaf4301b8, 0x1080000a, 0x3c020800,
- 0x8c430034, 0x10600007, 0x30a22000, 0x10400005, 0x34a30100, 0x8f820008,
- 0xaf830004, 0x24420001, 0xaf820008, 0x3c020800, 0x8c4300c0, 0x10600006,
- 0x3c030800, 0x8c6200c4, 0x24040001, 0x24420001, 0x0a000fc0, 0xac6200c4,
- 0x8f820004, 0x3c030010, 0x00431024, 0x14400009, 0x3c02001f, 0x3c030800,
- 0x8c620020, 0x00002021, 0x24420001, 0x0e000c99, 0xac620020, 0x0a000fc0,
- 0x00402021, 0x3442ff00, 0x14c20009, 0x2403bfff, 0x3c030800, 0x8c620020,
- 0x24040001, 0x24420001, 0x0e000c99, 0xac620020, 0x0a000fc0, 0x00402021,
- 0x8f820010, 0x00431024, 0x14400006, 0x00000000, 0xaf400048, 0x0e001144,
- 0xaf400040, 0x0a000fc0, 0x00402021, 0x0e0014c9, 0x00000000, 0x00402021,
- 0x10800005, 0x3c024000, 0x8f430124, 0x3c026020, 0xac430014, 0x3c024000,
- 0xaf420138, 0x00000000, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe0,
- 0xafbf0018, 0xafb10014, 0xafb00010, 0x8f420140, 0xaf420020, 0x8f430148,
- 0x3c027000, 0x00621824, 0x3c023000, 0x10620021, 0x0043102b, 0x14400006,
- 0x3c024000, 0x3c022000, 0x10620009, 0x3c024000, 0x0a00102b, 0x00000000,
- 0x10620045, 0x3c025000, 0x10620047, 0x3c024000, 0x0a00102b, 0x00000000,
+ 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00000000, 0x27440180, 0x3c038000,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24022000, 0x24030002, 0xa4820008,
+ 0xa083000b, 0xa4800010, 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00000000,
0x27440180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000,
0x8f420148, 0x24030002, 0xa083000b, 0x00021402, 0xa4820008, 0x8f430148,
- 0xa4830010, 0x8f420144, 0x3c031000, 0xac820024, 0xaf4301b8, 0x0a00102b,
- 0x3c024000, 0x8f420148, 0x24030002, 0x3044ffff, 0x00021402, 0x305000ff,
- 0x1203000c, 0x27510180, 0x2a020003, 0x10400005, 0x24020003, 0x0600001d,
- 0x36053000, 0x0a001012, 0x3c038000, 0x12020007, 0x00000000, 0x0a00101f,
- 0x00000000, 0x0e00111f, 0x00000000, 0x0a001010, 0x00402021, 0x0e001131,
- 0x00000000, 0x00402021, 0x36053000, 0x3c038000, 0x8f4201b8, 0x00431024,
- 0x1440fffd, 0x24020002, 0xa6250008, 0xa222000b, 0xa6240010, 0x8f420144,
- 0x3c031000, 0xae220024, 0xaf4301b8, 0x0a00102b, 0x3c024000, 0x0000000d,
- 0x00000000, 0x24000295, 0x0a00102b, 0x3c024000, 0x0e0013a7, 0x00000000,
- 0x0a00102b, 0x3c024000, 0x0e001552, 0x00000000, 0x3c024000, 0xaf420178,
- 0x00000000, 0x8fbf0018, 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020,
- 0x24020800, 0x03e00008, 0xaf4201b8, 0x27bdffe8, 0x3c04600c, 0xafbf0014,
- 0xafb00010, 0x8c825000, 0x3c1a8000, 0x2403ff7f, 0x3c106000, 0x00431024,
- 0x3442380c, 0x24030003, 0xac825000, 0x3c020008, 0xaf430008, 0x8e040808,
- 0x0342d825, 0x8e020808, 0x3c030800, 0xac600020, 0x3084fff0, 0x2c840001,
- 0x3042fff0, 0x38420010, 0x2c420001, 0xaf84000c, 0xaf820000, 0x0e001574,
- 0x00000000, 0x0e0014c7, 0x00000000, 0x3c020400, 0x3442000c, 0x3c03ffff,
- 0x34630806, 0xae021948, 0xae03194c, 0x8e021980, 0x34420200, 0xae021980,
- 0x8f500000, 0x32020003, 0x1040fffd, 0x32020001, 0x10400004, 0x32020002,
- 0x0e000f7d, 0x00000000, 0x32020002, 0x1040fff6, 0x00000000, 0x0e000fcb,
- 0x00000000, 0x0a00105c, 0x00000000, 0x27bdffe8, 0x3c04600c, 0xafbf0014,
- 0xafb00010, 0x8c825000, 0x3c1a8000, 0x2403ff7f, 0x3c106000, 0x00431024,
- 0x3442380c, 0x24030003, 0xac825000, 0x3c020008, 0xaf430008, 0x8e040808,
- 0x0342d825, 0x8e020808, 0x3c030800, 0xac600020, 0x3084fff0, 0x2c840001,
- 0x3042fff0, 0x38420010, 0x2c420001, 0xaf84000c, 0xaf820000, 0x0e001574,
- 0x00000000, 0x0e0014c7, 0x00000000, 0x3c020400, 0x3442000c, 0x3c03ffff,
- 0x34630806, 0xae021948, 0xae03194c, 0x8e021980, 0x8fbf0014, 0x34420200,
- 0xae021980, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x30a5ffff, 0x30c6ffff,
- 0x30e7ffff, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003,
- 0xa342018b, 0x97830006, 0x8f82000c, 0xaf440180, 0xa745018c, 0xa746018e,
- 0x10400005, 0xa7430190, 0x9743011c, 0x9742011e, 0x0a0010ad, 0x00021400,
- 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f840010,
- 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021,
- 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
- 0x00821024, 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104, 0x3042bfff,
- 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
- 0xaf4201b8, 0x03e00008, 0x00000000, 0x27440180, 0x3c038000, 0x8f4201b8,
- 0x00431024, 0x1440fffd, 0x24022000, 0x24030002, 0xa4820008, 0xa083000b,
- 0xa4800010, 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00000000, 0x27440180,
- 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x8f420148,
- 0x24030002, 0xa083000b, 0x00021402, 0xa4820008, 0x8f430148, 0xa4830010,
- 0x8f420144, 0x3c031000, 0xac820024, 0x03e00008, 0xaf4301b8, 0x27bdffe0,
- 0xafbf0018, 0xafb10014, 0xafb00010, 0x8f420148, 0x24030002, 0x3044ffff,
- 0x00021402, 0x305000ff, 0x1203000c, 0x27510180, 0x2a020003, 0x10400005,
- 0x24020003, 0x0600001d, 0x36053000, 0x0a00110a, 0x3c038000, 0x12020007,
- 0x00000000, 0x0a001117, 0x00000000, 0x0e00111f, 0x00000000, 0x0a001108,
- 0x00402021, 0x0e001131, 0x00000000, 0x00402021, 0x36053000, 0x3c038000,
- 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002, 0xa6250008, 0xa222000b,
- 0xa6240010, 0x8f420144, 0x3c031000, 0xae220024, 0xaf4301b8, 0x0a00111b,
- 0x8fbf0018, 0x0000000d, 0x00000000, 0x24000295, 0x8fbf0018, 0x8fb10014,
- 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3084ffff, 0x2c821389, 0x1040000d,
- 0x00001021, 0x3c030800, 0x24635680, 0x00042942, 0x00052880, 0x00a32821,
- 0x3086001f, 0x8ca40000, 0x24030001, 0x00c31804, 0x00832025, 0x03e00008,
- 0xaca40000, 0x03e00008, 0x24020091, 0x3084ffff, 0x2c821389, 0x1040000e,
- 0x00001021, 0x3c030800, 0x24635680, 0x00042942, 0x00052880, 0x00a32821,
- 0x3086001f, 0x24030001, 0x8ca40000, 0x00c31804, 0x00031827, 0x00832024,
- 0x03e00008, 0xaca40000, 0x03e00008, 0x24020091, 0x27bdffb0, 0xafbf0048,
- 0x93620023, 0x30420010, 0x1440025b, 0x24020001, 0x93420116, 0x93630005,
- 0x34424000, 0x30630001, 0x14600005, 0x03425821, 0x0e001548, 0x00000000,
- 0x0a0013a5, 0x8fbf0048, 0x93420112, 0x8f430104, 0x3c040020, 0x34424000,
- 0x00641824, 0x10600012, 0x03422821, 0x27450180, 0x3c038000, 0x8f4201b8,
+ 0xa4830010, 0x8f420144, 0x3c031000, 0xac820024, 0x03e00008, 0xaf4301b8,
+ 0x27bdffe0, 0xafbf0018, 0xafb10014, 0xafb00010, 0x8f420148, 0x24030002,
+ 0x3044ffff, 0x00021402, 0x305000ff, 0x1203000c, 0x27510180, 0x2a020003,
+ 0x10400005, 0x24020003, 0x0600001d, 0x36053000, 0x0a001117, 0x3c038000,
+ 0x12020007, 0x00000000, 0x0a001124, 0x00000000, 0x0e00112c, 0x00000000,
+ 0x0a001115, 0x00402021, 0x0e00113e, 0x00000000, 0x00402021, 0x36053000,
+ 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002, 0xa6250008,
+ 0xa222000b, 0xa6240010, 0x8f420144, 0x3c031000, 0xae220024, 0xaf4301b8,
+ 0x0a001128, 0x8fbf0018, 0x0000000d, 0x00000000, 0x240002bf, 0x8fbf0018,
+ 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3084ffff, 0x2c821389,
+ 0x1040000d, 0x00001021, 0x3c030800, 0x24635900, 0x00042942, 0x00052880,
+ 0x00a32821, 0x3086001f, 0x8ca40000, 0x24030001, 0x00c31804, 0x00832025,
+ 0x03e00008, 0xaca40000, 0x03e00008, 0x24020091, 0x3084ffff, 0x2c821389,
+ 0x1040000e, 0x00001021, 0x3c030800, 0x24635900, 0x00042942, 0x00052880,
+ 0x00a32821, 0x3086001f, 0x24030001, 0x8ca40000, 0x00c31804, 0x00031827,
+ 0x00832024, 0x03e00008, 0xaca40000, 0x03e00008, 0x24020091, 0x9482000c,
+ 0x24870014, 0x00021302, 0x00021080, 0x00824021, 0x00e8182b, 0x1060004f,
+ 0x00000000, 0x90e30000, 0x2c620009, 0x10400047, 0x3c020800, 0x24425890,
+ 0x00031880, 0x00621821, 0x8c640000, 0x00800008, 0x00000000, 0x0a0011a4,
+ 0x24e70001, 0x90e30001, 0x2402000a, 0x54620024, 0x01003821, 0x01071023,
+ 0x2c42000a, 0x54400020, 0x01003821, 0x3c050800, 0x8ca26c98, 0x24e70002,
+ 0x34420100, 0xaca26c98, 0x90e30000, 0x90e20001, 0x90e40002, 0x90e60003,
+ 0x24e70004, 0x24a56c98, 0x00031e00, 0x00021400, 0x00621825, 0x00042200,
+ 0x00641825, 0x00661825, 0xaca30004, 0x90e20000, 0x90e30001, 0x90e40002,
+ 0x90e60003, 0x24e70004, 0x00021600, 0x00031c00, 0x00431025, 0x00042200,
+ 0x00441025, 0x00461025, 0x0a0011a4, 0xaca20008, 0x90e30001, 0x24020004,
+ 0x1062000e, 0x00601021, 0x0a00119e, 0x01001021, 0x90e30001, 0x24020003,
+ 0x10620008, 0x00601021, 0x0a00119e, 0x01001021, 0x90e30001, 0x24020002,
+ 0x14620003, 0x01001021, 0x00601021, 0x00e21021, 0x0a0011a4, 0x00403821,
+ 0x90e20001, 0x0a0011a4, 0x00e23821, 0x01003821, 0x00e8102b, 0x5440ffb4,
+ 0x90e30000, 0x03e00008, 0x24020001, 0x27bdff90, 0x3c030800, 0xafbf006c,
+ 0xafbe0068, 0xafb70064, 0xafb60060, 0xafb5005c, 0xafb40058, 0xafb30054,
+ 0xafb20050, 0xafb1004c, 0xafb00048, 0xac606c98, 0x93620023, 0x30420010,
+ 0x1440027c, 0x24020001, 0x93420116, 0x93630005, 0x34424000, 0x30630001,
+ 0x14600005, 0x0342b021, 0x0e0015e0, 0x00000000, 0x0a001436, 0x8fbf006c,
+ 0x93420112, 0x8f430104, 0x3c040020, 0x34424000, 0x00641824, 0x10600012,
+ 0x03422821, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd,
+ 0x00000000, 0x8f420128, 0xaca20000, 0x8f640040, 0x24030008, 0x240240c1,
+ 0xa4a20008, 0x24020002, 0xa0a2000b, 0x3c021000, 0x0a0011f1, 0xa0a3000a,
+ 0x8f420104, 0x3c030040, 0x00431024, 0x1040001d, 0x3c038000, 0x27450180,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x8f420128, 0xaca20000,
+ 0x8f640040, 0x24030010, 0x240240c1, 0xa4a20008, 0x24020002, 0xa0a3000a,
+ 0x24030008, 0xa0a2000b, 0x3c021000, 0xa4a30010, 0xa0a00012, 0xa0a00013,
+ 0xaca00014, 0xaca00024, 0xaca00028, 0xaca0002c, 0xaca40018, 0x0e0015e0,
+ 0xaf4201b8, 0x0a001436, 0x8fbf006c, 0x8f820000, 0x10400016, 0x00000000,
+ 0x8f420104, 0x3c030001, 0x00431024, 0x10400011, 0x00000000, 0x8ca3000c,
+ 0x8f620030, 0x1462022d, 0x24020001, 0x8ca30010, 0x8f62002c, 0x14620229,
+ 0x24020001, 0x9763003a, 0x96c20000, 0x14430225, 0x24020001, 0x97630038,
+ 0x96c20002, 0x14430221, 0x24020001, 0xaf400048, 0xaf400054, 0xaf400040,
+ 0x8f740040, 0x8f650048, 0x00b43023, 0x04c10004, 0x00000000, 0x0000000d,
+ 0x00000000, 0x240001af, 0x9742011a, 0x3052ffff, 0x12400004, 0x8ed30004,
+ 0x02721021, 0x0a001228, 0x2451ffff, 0x02608821, 0x92d7000d, 0xa7a00020,
+ 0xa3a0001a, 0xafa00028, 0x9362003f, 0x32e30004, 0x1060003a, 0x305000ff,
+ 0x24040012, 0x16040006, 0x24020001, 0x3c040800, 0x8c830028, 0x24630001,
+ 0x0a001328, 0xac830028, 0x8f620044, 0x16620010, 0x27a60010, 0x27450180,
+ 0x3c038000, 0x2402001a, 0xa7a20020, 0x24020020, 0xafb40028, 0xa3b00022,
+ 0xa3a40023, 0xa3a2001a, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000,
+ 0x0a00130d, 0x00000000, 0x8f620044, 0x02621023, 0x0440001a, 0x02651023,
+ 0x044100d9, 0x24020001, 0x3c020800, 0x8c4300d8, 0x10600004, 0x24020001,
+ 0xa7a20020, 0x0a00125e, 0xafb40028, 0x2402001a, 0xa7a20020, 0x24020020,
+ 0xafb40028, 0xa3b00022, 0xa3a40023, 0xa3a2001a, 0x27a60010, 0x27450180,
+ 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x0a00130d,
+ 0x00000000, 0x0a001328, 0x24020001, 0x0293f023, 0x1bc00016, 0x025e102a,
+ 0x54400007, 0x32f700fe, 0x57d2000f, 0x027e9821, 0x32e20001, 0x5440000c,
+ 0x027e9821, 0x32f700fe, 0x0240f021, 0x3c040800, 0x8c8300c8, 0x00009021,
+ 0x24020001, 0xa7a20020, 0xafb40028, 0x24630001, 0x0a001282, 0xac8300c8,
+ 0x025e1023, 0x0a001282, 0x3052ffff, 0x0000f021, 0x24a2ffff, 0x02221823,
+ 0x1860001f, 0x0072102a, 0x54400019, 0x00a08821, 0x97a20020, 0x3c040800,
+ 0x8c8300cc, 0xafb40028, 0x34420001, 0x24630001, 0xa7a20020, 0x02741026,
+ 0x2c420001, 0xac8300cc, 0x2cc30001, 0x00431024, 0x1440000a, 0x02401821,
+ 0x27a60010, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd,
+ 0x00000000, 0x0a00130d, 0x00000000, 0x00a08821, 0x02431023, 0x3052ffff,
+ 0x0a0012ae, 0x32f700f6, 0x02741023, 0x18400008, 0x97a20020, 0x3c040800,
+ 0x8c8300d4, 0xafb30028, 0x34420400, 0x24630001, 0xa7a20020, 0xac8300d4,
+ 0x32e20002, 0x1040001c, 0x32e20010, 0x8f620044, 0x1662000d, 0x27a60010,
+ 0x97a20020, 0x27450180, 0x3c038000, 0xafb40028, 0x34420001, 0xa7a20020,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x0a00130d, 0x00000000,
+ 0x97a20020, 0x27450180, 0x3c038000, 0xafb40028, 0x34420001, 0xa7a20020,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x0a00130d, 0x00000000,
+ 0x54400003, 0x8ed50008, 0x0a001328, 0x24020001, 0x8f630054, 0x26a2ffff,
+ 0x00431023, 0x18400011, 0x27a60010, 0x97a20020, 0x3c040800, 0x8c8300d0,
+ 0x27450180, 0x3c078000, 0xafb40028, 0x34420001, 0x24630001, 0xa7a20020,
+ 0xac8300d0, 0x8f4201b8, 0x00471024, 0x1440fffd, 0x00000000, 0x0a00130d,
+ 0x00000000, 0x32e20020, 0x10400011, 0x00000000, 0x96c20012, 0x0052102b,
+ 0x10400008, 0x97a20020, 0x96d20012, 0x12400003, 0x02721021, 0x0a0012f2,
+ 0x2451ffff, 0x02608821, 0x97a20020, 0x93a3001a, 0x34420008, 0x34630004,
+ 0xa7a20020, 0xa3a3001a, 0x8f420104, 0x3c030080, 0x00431024, 0x10400037,
+ 0x3a03000a, 0x0e001151, 0x02c02021, 0x24030002, 0x1443002b, 0x3c030800,
+ 0x27a60010, 0x97a20020, 0x27450180, 0x3c038000, 0xafb40028, 0x34420001,
+ 0xa7a20020, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x8f420128,
+ 0xaca20000, 0x8cc30018, 0x240240c1, 0xa4a20008, 0xaca30018, 0x90c4000a,
+ 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x94c20010, 0xa4a20010, 0x90c30012,
+ 0xa0a30012, 0x90c20013, 0xa0a20013, 0x8cc30014, 0xaca30014, 0x8cc20024,
+ 0xaca20024, 0x8cc30028, 0xaca30028, 0x8cc4002c, 0x24020001, 0x3c031000,
+ 0xaca4002c, 0xaf4301b8, 0xaf400044, 0xaf400050, 0x0a001436, 0x8fbf006c,
+ 0x8c626c98, 0x30420100, 0x10400003, 0x24636c98, 0x8c620004, 0xaf62017c,
+ 0x3a03000a, 0x2c630001, 0x3a02000c, 0x2c420001, 0x00621825, 0x14600003,
+ 0x2402000e, 0x56020030, 0x00009021, 0x52400008, 0x96c4000e, 0x12400004,
+ 0xa7b20040, 0x02721021, 0x0a001343, 0x2451ffff, 0x02608821, 0x96c4000e,
+ 0x93630035, 0x8f62004c, 0x00642004, 0x00952021, 0x00821023, 0x18400015,
+ 0x00000000, 0x8f620018, 0x02621023, 0x1c400015, 0x97a20020, 0x8f620018,
+ 0x1662001c, 0x00000000, 0x8f62001c, 0x02a21023, 0x1c40000e, 0x97a20020,
+ 0x8f62001c, 0x16a20015, 0x00000000, 0x8f620058, 0x00821023, 0x18400011,
+ 0x97a20020, 0x0a001364, 0xafb10028, 0x8f620058, 0x00821023, 0x0441000b,
+ 0x97a20020, 0xafb10028, 0xafb30034, 0xafb50038, 0xafa4003c, 0x34420020,
+ 0x0a00136d, 0xa7a20020, 0x02809821, 0x02608821, 0x8f640058, 0x8f62004c,
+ 0x02a21023, 0x18400009, 0x00000000, 0x8f620054, 0x02a21023, 0x1c400005,
+ 0x97a20020, 0xafb10028, 0xafb50024, 0x0a001385, 0x34420040, 0x9742011a,
+ 0x1440000c, 0x24020014, 0x8f620058, 0x14820009, 0x24020014, 0x8f63004c,
+ 0x8f620054, 0x10620004, 0x97a20020, 0xafb10028, 0x34420080, 0xa7a20020,
+ 0x24020014, 0x1202000a, 0x2a020015, 0x10400005, 0x2402000c, 0x12020006,
+ 0x32e20001, 0x0a0013c6, 0x00000000, 0x24020016, 0x16020035, 0x32e20001,
+ 0x8f620084, 0x24420001, 0x16a20031, 0x32e20001, 0x24020014, 0x12020021,
+ 0x2a020015, 0x10400005, 0x2402000c, 0x12020008, 0x32e20001, 0x0a0013c6,
+ 0x00000000, 0x24020016, 0x1202000c, 0x32e20001, 0x0a0013c6, 0x00000000,
+ 0x97a30020, 0x2402000e, 0xafb10028, 0xa3b00022, 0xa3a20023, 0xafb50024,
+ 0x34630054, 0x0a0013c5, 0xa7a30020, 0x97a20020, 0x93a4001a, 0x24030010,
+ 0xafb10028, 0xa3b00022, 0xa3a30023, 0xafb50024, 0x3442005d, 0x34840002,
+ 0xa7a20020, 0x0a0013c5, 0xa3a4001a, 0x97a20020, 0x24030012, 0xa3a30023,
+ 0x93a3001a, 0xafb10028, 0xa3b00022, 0xafb50024, 0x3042fffe, 0x3442005c,
+ 0x34630002, 0xa7a20020, 0xa3a3001a, 0x32e20001, 0x10400030, 0x2402000c,
+ 0x12020013, 0x2a02000d, 0x10400005, 0x2402000a, 0x12020008, 0x97a20020,
+ 0x0a0013f8, 0x32e20009, 0x2402000e, 0x1202001b, 0x32e20009, 0x0a0013f9,
+ 0x0002102b, 0x93a4001a, 0x24030008, 0xafb10028, 0xa3b00022, 0xa3a30023,
+ 0x0a0013f4, 0x34420013, 0x97a30020, 0x30620004, 0x14400005, 0x93a2001a,
+ 0x3463001b, 0xa7a30020, 0x0a0013e7, 0x24030016, 0x3463001b, 0xa7a30020,
+ 0x24030010, 0xafb10028, 0xa3b00022, 0xa3a30023, 0x34420002, 0x0a0013f7,
+ 0xa3a2001a, 0x97a20020, 0x93a4001a, 0x24030010, 0xafb10028, 0xa3b00022,
+ 0xa3a30023, 0x3442001b, 0x34840002, 0xa7a20020, 0xa3a4001a, 0x32e20009,
+ 0x0002102b, 0x00021023, 0x30420007, 0x12400015, 0x34450003, 0x8f820018,
+ 0x24030800, 0x27440180, 0x24420001, 0xaf820018, 0x24020004, 0xaf4301b8,
+ 0xa4850008, 0xa082000b, 0x93430120, 0x00003021, 0x3c021000, 0xa492000e,
+ 0xac950024, 0xac930028, 0x007e1821, 0xa483000c, 0xaf4201b8, 0x0a001413,
+ 0x97a20020, 0x24060001, 0x97a20020, 0x10400020, 0x27450180, 0x3c038000,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x8f420128, 0xaca20000,
+ 0x8fa30028, 0x240240c1, 0xa4a20008, 0xaca30018, 0x93a4001a, 0x24020002,
+ 0xa0a2000b, 0xa0a4000a, 0x97a20020, 0xa4a20010, 0x93a30022, 0xa0a30012,
+ 0x93a20023, 0xa0a20013, 0x8fa30024, 0xaca30014, 0x8fa20034, 0xaca20024,
+ 0x8fa30038, 0xaca30028, 0x8fa2003c, 0x3c031000, 0xaca2002c, 0xaf4301b8,
+ 0x00c01021, 0x8fbf006c, 0x8fbe0068, 0x8fb70064, 0x8fb60060, 0x8fb5005c,
+ 0x8fb40058, 0x8fb30054, 0x8fb20050, 0x8fb1004c, 0x8fb00048, 0x03e00008,
+ 0x27bd0070, 0x8f470140, 0x8f460148, 0x3c028000, 0x00c24024, 0x00062c02,
+ 0x30a300ff, 0x24020019, 0x106200e7, 0x27440180, 0x2862001a, 0x1040001f,
+ 0x24020008, 0x106200be, 0x28620009, 0x1040000d, 0x24020001, 0x10620046,
+ 0x28620002, 0x50400005, 0x24020006, 0x1060002e, 0x00a01821, 0x0a00155e,
+ 0x00000000, 0x1062005b, 0x00a01821, 0x0a00155e, 0x00000000, 0x2402000b,
+ 0x10620084, 0x2862000c, 0x10400005, 0x24020009, 0x106200bc, 0x00061c02,
+ 0x0a00155e, 0x00000000, 0x2402000e, 0x106200b7, 0x00061c02, 0x0a00155e,
+ 0x00000000, 0x28620021, 0x10400009, 0x2862001f, 0x104000c1, 0x2402001b,
+ 0x106200bf, 0x2402001c, 0x1062009a, 0x00061c02, 0x0a00155e, 0x00000000,
+ 0x240200c2, 0x106200ca, 0x286200c3, 0x10400005, 0x24020080, 0x1062005a,
+ 0x00a01821, 0x0a00155e, 0x00000000, 0x240200c9, 0x106200cd, 0x30c5ffff,
+ 0x0a00155e, 0x00000000, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd,
+ 0x24020001, 0xa4830008, 0x24030002, 0xac870000, 0xac800004, 0xa082000a,
+ 0xa083000b, 0xa4860010, 0x8f430144, 0x3c021000, 0xac800028, 0xac830024,
+ 0x3c036000, 0xaf4201b8, 0x03e00008, 0xac600808, 0x11000009, 0x00a01821,
+ 0x3c020800, 0x24030002, 0xa0436c88, 0x24426c88, 0xac470008, 0x8f430144,
+ 0x03e00008, 0xac430004, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd,
+ 0x24020002, 0xac800000, 0xac870004, 0xa4830008, 0xa082000a, 0xa082000b,
+ 0xa4860010, 0xac800024, 0x8f420144, 0x3c031000, 0xac820028, 0x3c026000,
+ 0xaf4301b8, 0x03e00008, 0xac400808, 0x3c080800, 0x3c058000, 0x8f4201b8,
+ 0x00451024, 0x1440fffd, 0x00000000, 0xac870000, 0x91026c88, 0x00002821,
+ 0x10400002, 0x25076c88, 0x8ce50008, 0xac850004, 0xa4830008, 0x91036c88,
+ 0x24020002, 0xa082000b, 0xa4860010, 0x34630001, 0xa083000a, 0x8f420144,
+ 0xac820024, 0x91036c88, 0x10600002, 0x00001021, 0x8ce20004, 0xac820028,
+ 0x3c021000, 0xaf4201b8, 0x3c026000, 0xa1006c88, 0x03e00008, 0xac400808,
+ 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020002, 0xa082000b,
+ 0xa4830008, 0xa4860010, 0x8f420144, 0x3c031000, 0xa4820012, 0x03e00008,
+ 0xaf4301b8, 0x30c2ffff, 0x14400028, 0x00061c02, 0x93620005, 0x30420004,
+ 0x14400020, 0x3c029000, 0x34420001, 0x00e21025, 0xaf420020, 0x3c038000,
+ 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, 0x3c038000,
+ 0x34630001, 0x00e31825, 0x34420004, 0xa3620005, 0xaf430020, 0x93620005,
+ 0x30420004, 0x14400003, 0x3c038000, 0x0000000d, 0x3c038000, 0x8f4201b8,
+ 0x00431024, 0x1440fffd, 0x24020005, 0x3c031000, 0xac870000, 0xa082000b,
+ 0xaf4301b8, 0x0a00150d, 0x00061c02, 0x0000000d, 0x03e00008, 0x00000000,
+ 0x00061c02, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020001,
+ 0xa4830008, 0x24030002, 0xac870000, 0xac800004, 0xa082000a, 0xa083000b,
+ 0xa4860010, 0x8f430144, 0x3c021000, 0xac800028, 0xac830024, 0x03e00008,
+ 0xaf4201b8, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020002,
+ 0xac800000, 0xac870004, 0xa4830008, 0xa082000a, 0xa082000b, 0xa4860010,
+ 0xac800024, 0x8f420144, 0x3c031000, 0xac820028, 0x03e00008, 0xaf4301b8,
+ 0x00061c02, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020001,
+ 0xa4830008, 0x24030002, 0xa082000a, 0x3c021000, 0xac870000, 0xac800004,
+ 0xa083000b, 0xa4860010, 0xac800024, 0xac800028, 0x03e00008, 0xaf4201b8,
+ 0x00a01821, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020002,
+ 0xac870000, 0xac800004, 0xa4830008, 0xa080000a, 0x0a001518, 0xa082000b,
+ 0x8f440144, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002,
+ 0x240340c9, 0xaf470180, 0xa342018b, 0x3c021000, 0xa7430188, 0xaf4401a4,
+ 0xaf4501a8, 0xaf4001ac, 0x03e00008, 0xaf4201b8, 0x0000000d, 0x03e00008,
+ 0x00000000, 0x03e00008, 0x00000000, 0x8f420100, 0x3042003e, 0x14400011,
+ 0x24020001, 0xaf400048, 0x8f420100, 0x304207c0, 0x10400005, 0x00000000,
+ 0xaf40004c, 0xaf400050, 0x03e00008, 0x24020001, 0xaf400054, 0xaf400040,
+ 0x8f420100, 0x30423800, 0x54400001, 0xaf400044, 0x24020001, 0x03e00008,
+ 0x00000000, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002,
+ 0x240340c9, 0xaf440180, 0xa342018b, 0x3c021000, 0xa7430188, 0xaf4501a4,
+ 0xaf4601a8, 0xaf4701ac, 0x03e00008, 0xaf4201b8, 0x3c029000, 0x34420001,
+ 0x00822025, 0xaf440020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd,
+ 0x00000000, 0x03e00008, 0x00000000, 0x3c028000, 0x34420001, 0x00822025,
+ 0x03e00008, 0xaf440020, 0x308600ff, 0x27450180, 0x3c038000, 0x8f4201b8,
0x00431024, 0x1440fffd, 0x00000000, 0x8f420128, 0xaca20000, 0x8f640040,
0x24030008, 0x240240c1, 0xa4a20008, 0x24020002, 0xa0a2000b, 0x3c021000,
- 0x0a001181, 0xa0a3000a, 0x8f420104, 0x3c030040, 0x00431024, 0x1040001d,
- 0x3c038000, 0x27450180, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000,
- 0x8f420128, 0xaca20000, 0x8f640040, 0x24030010, 0x240240c1, 0xa4a20008,
- 0x24020002, 0xa0a3000a, 0x24030008, 0xa0a2000b, 0x3c021000, 0xa4a30010,
- 0xa0a00012, 0xa0a00013, 0xaca00014, 0xaca00024, 0xaca00028, 0xaca0002c,
- 0xaca40018, 0x0e001548, 0xaf4201b8, 0x0a0013a5, 0x8fbf0048, 0x8f820000,
- 0x10400016, 0x00000000, 0x8f420104, 0x3c030001, 0x00431024, 0x10400011,
- 0x00000000, 0x8ca3000c, 0x8f620030, 0x1462020c, 0x24020001, 0x8ca30010,
- 0x8f62002c, 0x14620208, 0x24020001, 0x9763003a, 0x95620000, 0x14430204,
- 0x24020001, 0x97630038, 0x95620002, 0x14430200, 0x24020001, 0xaf400048,
- 0xaf400054, 0xaf400040, 0x8f690040, 0x8f6a0048, 0x01497023, 0x05c10004,
- 0x00000000, 0x0000000d, 0x00000000, 0x24000169, 0x9742011a, 0x3046ffff,
- 0x10c00004, 0x8d680004, 0x01061021, 0x0a0011b8, 0x2445ffff, 0x01002821,
- 0x916c000d, 0xa7a00020, 0xa3a0001a, 0xafa00028, 0x9362003f, 0x31830004,
- 0x1060003a, 0x304700ff, 0x24040012, 0x14e40006, 0x24020001, 0x3c040800,
- 0x8c830028, 0x24630001, 0x0a00128d, 0xac830028, 0x8f620044, 0x15020010,
- 0x27a60010, 0x27450180, 0x3c038000, 0x2402001a, 0xa7a20020, 0x24020020,
- 0xafa90028, 0xa3a70022, 0xa3a40023, 0xa3a2001a, 0x8f4201b8, 0x00431024,
- 0x1440fffd, 0x00000000, 0x0a001272, 0x00000000, 0x8f620044, 0x01021023,
- 0x0440001a, 0x010a1023, 0x044100ae, 0x24020001, 0x3c020800, 0x8c4300d8,
- 0x10600004, 0x24020001, 0xa7a20020, 0x0a0011ee, 0xafa90028, 0x2402001a,
- 0xa7a20020, 0x24020020, 0xafa90028, 0xa3a70022, 0xa3a40023, 0xa3a2001a,
- 0x27a60010, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd,
- 0x00000000, 0x0a001272, 0x00000000, 0x0a00128d, 0x24020001, 0x01286823,
- 0x19a00016, 0x00cd102a, 0x54400007, 0x318c00fe, 0x55a6000f, 0x010d4021,
- 0x31820001, 0x5440000c, 0x010d4021, 0x318c00fe, 0x00c06821, 0x3c040800,
- 0x8c8300c8, 0x00003021, 0x24020001, 0xa7a20020, 0xafa90028, 0x24630001,
- 0x0a001212, 0xac8300c8, 0x00cd1023, 0x0a001212, 0x3046ffff, 0x00006821,
- 0x2542ffff, 0x00a21823, 0x1860001e, 0x0066102a, 0x14400018, 0x01402821,
- 0x97a20020, 0x3c040800, 0x8c8300cc, 0xafa90028, 0x34420001, 0x24630001,
- 0xa7a20020, 0x01091026, 0x2c420001, 0xac8300cc, 0x2dc30001, 0x00431024,
- 0x1440000a, 0x00c01821, 0x27a60010, 0x27450180, 0x3c038000, 0x8f4201b8,
- 0x00431024, 0x1440fffd, 0x00000000, 0x0a001272, 0x00000000, 0x00c31023,
- 0x3046ffff, 0x0a00123d, 0x318c00f6, 0x01091023, 0x18400008, 0x97a20020,
- 0x3c040800, 0x8c8300d4, 0xafa80028, 0x34420400, 0x24630001, 0xa7a20020,
- 0xac8300d4, 0x31820002, 0x1040001c, 0x31820010, 0x8f620044, 0x1502000d,
- 0x27a60010, 0x97a20020, 0x27450180, 0x3c038000, 0xafa90028, 0x34420001,
- 0xa7a20020, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x0a001272,
- 0x00000000, 0x97a20020, 0x27450180, 0x3c038000, 0xafa90028, 0x34420001,
- 0xa7a20020, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x0a001272,
- 0x00000000, 0x54400003, 0x8d6a0008, 0x0a00128d, 0x24020001, 0x8f630054,
- 0x2542ffff, 0x00431023, 0x1840002e, 0x97a20020, 0x27a60010, 0x3c040800,
- 0x8c8300d0, 0x27450180, 0x3c078000, 0xafa90028, 0x34420001, 0x24630001,
- 0xa7a20020, 0xac8300d0, 0x8f4201b8, 0x00471024, 0x1440fffd, 0x00000000,
- 0x8f420128, 0xaca20000, 0x8cc30018, 0x240240c1, 0xa4a20008, 0xaca30018,
- 0x90c4000a, 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x94c20010, 0xa4a20010,
- 0x90c30012, 0xa0a30012, 0x90c20013, 0xa0a20013, 0x8cc30014, 0xaca30014,
- 0x8cc20024, 0xaca20024, 0x8cc30028, 0xaca30028, 0x8cc4002c, 0x24020001,
- 0x3c031000, 0xaca4002c, 0xaf4301b8, 0xaf400044, 0xaf400050, 0x0a0013a5,
- 0x8fbf0048, 0x31820020, 0x10400011, 0x00000000, 0x95620012, 0x0046102b,
- 0x10400008, 0x97a20020, 0x95660012, 0x10c00003, 0x01061021, 0x0a00129e,
- 0x2445ffff, 0x01002821, 0x97a20020, 0x93a3001a, 0x34420008, 0x34630004,
- 0xa7a20020, 0xa3a3001a, 0x8f420104, 0x38e3000a, 0x2c630001, 0x38e2000c,
- 0x2c420001, 0x00621825, 0x14600003, 0x2402000e, 0x54e2002a, 0x00003021,
- 0x50c00008, 0x9564000e, 0x10c00004, 0xa7a60040, 0x01061021, 0x0a0012b6,
- 0x2445ffff, 0x01002821, 0x9564000e, 0x93630035, 0x8f62004c, 0x00642004,
- 0x008a2021, 0x00821023, 0x1840001d, 0x00000000, 0x8f620018, 0x01021023,
- 0x1c40000f, 0x97a20020, 0x8f620018, 0x15020016, 0x00000000, 0x8f62001c,
- 0x01421023, 0x1c400008, 0x97a20020, 0x8f62001c, 0x1542000f, 0x00000000,
- 0x8f620058, 0x00821023, 0x1840000b, 0x97a20020, 0xafa50028, 0xafa80034,
- 0xafaa0038, 0xafa4003c, 0x34420020, 0x0a0012da, 0xa7a20020, 0x01204021,
- 0x01002821, 0x8f640058, 0x8f62004c, 0x01421023, 0x18400009, 0x00000000,
- 0x8f620054, 0x01421023, 0x1c400005, 0x97a20020, 0xafa50028, 0xafaa0024,
- 0x0a0012f2, 0x34420040, 0x9742011a, 0x1440000c, 0x24020014, 0x8f620058,
- 0x14820009, 0x24020014, 0x8f63004c, 0x8f620054, 0x10620004, 0x97a20020,
- 0xafa50028, 0x34420080, 0xa7a20020, 0x24020014, 0x10e2000a, 0x28e20015,
- 0x10400005, 0x2402000c, 0x10e20006, 0x31820001, 0x0a001333, 0x00000000,
- 0x24020016, 0x14e20035, 0x31820001, 0x8f620084, 0x24420001, 0x15420031,
- 0x31820001, 0x24020014, 0x10e20021, 0x28e20015, 0x10400005, 0x2402000c,
- 0x10e20008, 0x31820001, 0x0a001333, 0x00000000, 0x24020016, 0x10e2000c,
- 0x31820001, 0x0a001333, 0x00000000, 0x97a30020, 0x2402000e, 0xafa50028,
- 0xa3a70022, 0xa3a20023, 0xafaa0024, 0x34630054, 0x0a001332, 0xa7a30020,
- 0x97a20020, 0x93a4001a, 0x24030010, 0xafa50028, 0xa3a70022, 0xa3a30023,
- 0xafaa0024, 0x3442005d, 0x34840002, 0xa7a20020, 0x0a001332, 0xa3a4001a,
- 0x97a20020, 0x24030012, 0xa3a30023, 0x93a3001a, 0xafa50028, 0xa3a70022,
- 0xafaa0024, 0x3042fffe, 0x3442005c, 0x34630002, 0xa7a20020, 0xa3a3001a,
- 0x31820001, 0x10400030, 0x2402000c, 0x10e20013, 0x28e2000d, 0x10400005,
- 0x2402000a, 0x10e20008, 0x97a20020, 0x0a001365, 0x31820009, 0x2402000e,
- 0x10e2001b, 0x31820009, 0x0a001366, 0x0002102b, 0x93a4001a, 0x24030008,
- 0xafa50028, 0xa3a70022, 0xa3a30023, 0x0a001361, 0x34420013, 0x97a30020,
- 0x30620004, 0x14400005, 0x93a2001a, 0x3463001b, 0xa7a30020, 0x0a001354,
- 0x24030016, 0x3463001b, 0xa7a30020, 0x24030010, 0xafa50028, 0xa3a70022,
- 0xa3a30023, 0x34420002, 0x0a001364, 0xa3a2001a, 0x97a20020, 0x93a4001a,
- 0x24030010, 0xafa50028, 0xa3a70022, 0xa3a30023, 0x3442001b, 0x34840002,
- 0xa7a20020, 0xa3a4001a, 0x31820009, 0x0002102b, 0x00021023, 0x30420007,
- 0x10c00017, 0x34440003, 0x8f820014, 0x24030800, 0x27450180, 0x24420001,
- 0xaf820014, 0x24020004, 0xaf4301b8, 0xa4a40008, 0xa0a2000b, 0x93440120,
- 0x3c031000, 0xa4a6000e, 0xacaa0024, 0xaca80028, 0x008d2021, 0xa4a4000c,
- 0xaf4301b8, 0x97a20020, 0x00003021, 0x3042ffbf, 0x0a001381, 0xa7a20020,
- 0x24060001, 0x97a20020, 0x10400020, 0x27450180, 0x3c038000, 0x8f4201b8,
- 0x00431024, 0x1440fffd, 0x00000000, 0x8f420128, 0xaca20000, 0x8fa30028,
- 0x240240c1, 0xa4a20008, 0xaca30018, 0x93a4001a, 0x24020002, 0xa0a2000b,
- 0xa0a4000a, 0x97a20020, 0xa4a20010, 0x93a30022, 0xa0a30012, 0x93a20023,
- 0xa0a20013, 0x8fa30024, 0xaca30014, 0x8fa20034, 0xaca20024, 0x8fa30038,
- 0xaca30028, 0x8fa2003c, 0x3c031000, 0xaca2002c, 0xaf4301b8, 0x00c01021,
- 0x8fbf0048, 0x03e00008, 0x27bd0050, 0x8f470140, 0x8f460148, 0x3c028000,
- 0x00c24024, 0x00062c02, 0x30a300ff, 0x24020019, 0x106200e7, 0x27440180,
- 0x2862001a, 0x1040001f, 0x24020008, 0x106200be, 0x28620009, 0x1040000d,
- 0x24020001, 0x10620046, 0x28620002, 0x50400005, 0x24020006, 0x1060002e,
- 0x00a01821, 0x0a0014c4, 0x00000000, 0x1062005b, 0x00a01821, 0x0a0014c4,
- 0x00000000, 0x2402000b, 0x10620084, 0x2862000c, 0x10400005, 0x24020009,
- 0x106200bc, 0x00061c02, 0x0a0014c4, 0x00000000, 0x2402000e, 0x106200b7,
- 0x00061c02, 0x0a0014c4, 0x00000000, 0x28620021, 0x10400009, 0x2862001f,
- 0x104000c1, 0x2402001b, 0x106200bf, 0x2402001c, 0x1062009a, 0x00061c02,
- 0x0a0014c4, 0x00000000, 0x240200c2, 0x106200ca, 0x286200c3, 0x10400005,
- 0x24020080, 0x1062005a, 0x00a01821, 0x0a0014c4, 0x00000000, 0x240200c9,
- 0x106200cd, 0x30c5ffff, 0x0a0014c4, 0x00000000, 0x3c058000, 0x8f4201b8,
- 0x00451024, 0x1440fffd, 0x24020001, 0xa4830008, 0x24030002, 0xac870000,
- 0xac800004, 0xa082000a, 0xa083000b, 0xa4860010, 0x8f430144, 0x3c021000,
- 0xac800028, 0xac830024, 0x3c036000, 0xaf4201b8, 0x03e00008, 0xac600808,
- 0x11000009, 0x00a01821, 0x3c020800, 0x24030002, 0xa0436a08, 0x24426a08,
- 0xac470008, 0x8f430144, 0x03e00008, 0xac430004, 0x3c058000, 0x8f4201b8,
- 0x00451024, 0x1440fffd, 0x24020002, 0xac800000, 0xac870004, 0xa4830008,
- 0xa082000a, 0xa082000b, 0xa4860010, 0xac800024, 0x8f420144, 0x3c031000,
- 0xac820028, 0x3c026000, 0xaf4301b8, 0x03e00008, 0xac400808, 0x3c080800,
- 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x00000000, 0xac870000,
- 0x91026a08, 0x00002821, 0x10400002, 0x25076a08, 0x8ce50008, 0xac850004,
- 0xa4830008, 0x91036a08, 0x24020002, 0xa082000b, 0xa4860010, 0x34630001,
- 0xa083000a, 0x8f420144, 0xac820024, 0x91036a08, 0x10600002, 0x00001021,
- 0x8ce20004, 0xac820028, 0x3c021000, 0xaf4201b8, 0x3c026000, 0xa1006a08,
- 0x03e00008, 0xac400808, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd,
- 0x24020002, 0xa082000b, 0xa4830008, 0xa4860010, 0x8f420144, 0x3c031000,
- 0xa4820012, 0x03e00008, 0xaf4301b8, 0x30c2ffff, 0x14400028, 0x00061c02,
- 0x93620005, 0x30420004, 0x14400020, 0x3c029000, 0x34420001, 0x00e21025,
- 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000,
- 0x93620005, 0x3c038000, 0x34630001, 0x00e31825, 0x34420004, 0xa3620005,
- 0xaf430020, 0x93620005, 0x30420004, 0x14400003, 0x3c038000, 0x0000000d,
- 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020005, 0x3c031000,
- 0xac870000, 0xa082000b, 0xaf4301b8, 0x0a001473, 0x00061c02, 0x0000000d,
- 0x03e00008, 0x00000000, 0x00061c02, 0x3c058000, 0x8f4201b8, 0x00451024,
- 0x1440fffd, 0x24020001, 0xa4830008, 0x24030002, 0xac870000, 0xac800004,
- 0xa082000a, 0xa083000b, 0xa4860010, 0x8f430144, 0x3c021000, 0xac800028,
- 0xac830024, 0x03e00008, 0xaf4201b8, 0x3c058000, 0x8f4201b8, 0x00451024,
- 0x1440fffd, 0x24020002, 0xac800000, 0xac870004, 0xa4830008, 0xa082000a,
- 0xa082000b, 0xa4860010, 0xac800024, 0x8f420144, 0x3c031000, 0xac820028,
- 0x03e00008, 0xaf4301b8, 0x00061c02, 0x3c058000, 0x8f4201b8, 0x00451024,
- 0x1440fffd, 0x24020001, 0xa4830008, 0x24030002, 0xa082000a, 0x3c021000,
- 0xac870000, 0xac800004, 0xa083000b, 0xa4860010, 0xac800024, 0xac800028,
- 0x03e00008, 0xaf4201b8, 0x00a01821, 0x3c058000, 0x8f4201b8, 0x00451024,
- 0x1440fffd, 0x24020002, 0xac870000, 0xac800004, 0xa4830008, 0xa080000a,
- 0x0a00147e, 0xa082000b, 0x8f440144, 0x3c038000, 0x8f4201b8, 0x00431024,
- 0x1440fffd, 0x24020002, 0x240340c9, 0xaf470180, 0xa342018b, 0x3c021000,
- 0xa7430188, 0xaf4401a4, 0xaf4501a8, 0xaf4001ac, 0x03e00008, 0xaf4201b8,
- 0x0000000d, 0x03e00008, 0x00000000, 0x03e00008, 0x00000000, 0x8f420100,
- 0x3042003e, 0x14400011, 0x24020001, 0xaf400048, 0x8f420100, 0x304207c0,
- 0x10400005, 0x00000000, 0xaf40004c, 0xaf400050, 0x03e00008, 0x24020001,
- 0xaf400054, 0xaf400040, 0x8f420100, 0x30423800, 0x54400001, 0xaf400044,
- 0x24020001, 0x03e00008, 0x00000000, 0x3c038000, 0x8f4201b8, 0x00431024,
- 0x1440fffd, 0x24020002, 0x240340c9, 0xaf440180, 0xa342018b, 0x3c021000,
- 0xa7430188, 0xaf4501a4, 0xaf4601a8, 0xaf4701ac, 0x03e00008, 0xaf4201b8,
- 0x3c029000, 0x34420001, 0x00822025, 0xaf440020, 0x3c038000, 0x8f420020,
- 0x00431024, 0x1440fffd, 0x00000000, 0x03e00008, 0x00000000, 0x3c028000,
- 0x34420001, 0x00822025, 0x03e00008, 0xaf440020, 0x308600ff, 0x27450180,
- 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x8f420128,
- 0xaca20000, 0x8f640040, 0x24030008, 0x240240c1, 0xa4a20008, 0x24020002,
- 0xa0a2000b, 0x3c021000, 0xa0a6000a, 0xa4a30010, 0xa0a00012, 0xa0a00013,
- 0xaca00014, 0xaca00024, 0xaca00028, 0xaca0002c, 0xaca40018, 0x03e00008,
- 0xaf4201b8, 0x24020001, 0xacc40000, 0x03e00008, 0xa4e50000, 0x03e00008,
- 0x24020001, 0x24020001, 0xaf400044, 0x03e00008, 0xaf400050, 0x00803021,
- 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000,
- 0x8f420128, 0xaca20000, 0x8cc30018, 0x240240c1, 0xa4a20008, 0xaca30018,
- 0x90c4000a, 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x94c20010, 0xa4a20010,
- 0x90c30012, 0xa0a30012, 0x90c20013, 0xa0a20013, 0x8cc30014, 0xaca30014,
- 0x8cc20024, 0xaca20024, 0x8cc30028, 0xaca30028, 0x8cc2002c, 0x3c031000,
- 0xaca2002c, 0x24020001, 0xaf4301b8, 0xaf400044, 0x03e00008, 0xaf400050,
- 0x27bdffe8, 0xafbf0010, 0x0e001032, 0x00000000, 0x00002021, 0x0e000c99,
- 0xaf400180, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x8f460148, 0x27450180,
- 0x3c038000, 0x00061402, 0x304700ff, 0x8f4201b8, 0x00431024, 0x1440fffd,
- 0x00000000, 0x8f440140, 0x00061202, 0x304200ff, 0x00061c02, 0xaca20004,
- 0x24020002, 0xa4a30008, 0x30c300ff, 0xa0a2000b, 0xaca30024, 0x10e0000a,
- 0xaca40000, 0x28e20004, 0x14400005, 0x24020001, 0x24020005, 0x54e20005,
- 0xa0a0000a, 0x24020001, 0x0a001571, 0xa0a2000a, 0xa0a0000a, 0x3c021000,
- 0x03e00008, 0xaf4201b8, 0x03e00008, 0x00001021, 0x10c00007, 0x00000000,
- 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000, 0x14c0fffb, 0x24840004,
- 0x03e00008, 0x00000000, 0x0a001587, 0x00a01021, 0xac860000, 0x00000000,
- 0x00000000, 0x24840004, 0x00a01021, 0x1440fffa, 0x24a5ffff, 0x03e00008,
- 0x00000000, 0x00000000 };
+ 0xa0a6000a, 0xa4a30010, 0xa0a00012, 0xa0a00013, 0xaca00014, 0xaca00024,
+ 0xaca00028, 0xaca0002c, 0xaca40018, 0x03e00008, 0xaf4201b8, 0x24020001,
+ 0xacc40000, 0x03e00008, 0xa4e50000, 0x24020001, 0xaf400044, 0x03e00008,
+ 0xaf400050, 0x00803021, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024,
+ 0x1440fffd, 0x00000000, 0x8f420128, 0xaca20000, 0x8cc30018, 0x240240c1,
+ 0xa4a20008, 0xaca30018, 0x90c4000a, 0x24020002, 0xa0a2000b, 0xa0a4000a,
+ 0x94c20010, 0xa4a20010, 0x90c30012, 0xa0a30012, 0x90c20013, 0xa0a20013,
+ 0x8cc30014, 0xaca30014, 0x8cc20024, 0xaca20024, 0x8cc30028, 0xaca30028,
+ 0x8cc2002c, 0x3c031000, 0xaca2002c, 0x24020001, 0xaf4301b8, 0xaf400044,
+ 0x03e00008, 0xaf400050, 0x27bdffe8, 0xafbf0010, 0x0e001047, 0x00000000,
+ 0x00002021, 0x0e000c78, 0xaf400180, 0x8fbf0010, 0x03e00008, 0x27bd0018,
+ 0x8f460148, 0x27450180, 0x3c038000, 0x00061402, 0x304700ff, 0x8f4201b8,
+ 0x00431024, 0x1440fffd, 0x00000000, 0x8f440140, 0x00061202, 0x304200ff,
+ 0x00061c02, 0xaca20004, 0x24020002, 0xa4a30008, 0x30c300ff, 0xa0a2000b,
+ 0xaca30024, 0x10e0000a, 0xaca40000, 0x28e20004, 0x14400005, 0x24020001,
+ 0x24020005, 0x54e20005, 0xa0a0000a, 0x24020001, 0x0a001609, 0xa0a2000a,
+ 0xa0a0000a, 0x3c021000, 0x03e00008, 0xaf4201b8, 0x03e00008, 0x00001021,
+ 0x10c00007, 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000,
+ 0x14c0fffb, 0x24840004, 0x03e00008, 0x00000000, 0x0a00161f, 0x00a01021,
+ 0xac860000, 0x00000000, 0x00000000, 0x24840004, 0x00a01021, 0x1440fffa,
+ 0x24a5ffff, 0x03e00008, 0x00000000, 0x00000000 };
static u32 bnx2_RXP_b06FwData[(0x0/4) + 1] = { 0x0 };
-static u32 bnx2_RXP_b06FwRodata[(0x0/4) + 1] = { 0x0 };
-static u32 bnx2_RXP_b06FwBss[(0x1394/4) + 1] = { 0x0 };
-static u32 bnx2_RXP_b06FwSbss[(0x18/4) + 1] = { 0x0 };
+static u32 bnx2_RXP_b06FwRodata[(0x28/4) + 1] = {
+ 0x0800468c, 0x0800458c, 0x08004630, 0x08004648, 0x08004660, 0x08004680,
+ 0x0800468c, 0x0800468c, 0x08004594, 0x00000000, 0x00000000 };
+static u32 bnx2_RXP_b06FwBss[(0x13a4/4) + 1] = { 0x0 };
+static u32 bnx2_RXP_b06FwSbss[(0x1c/4) + 1] = { 0x0 };
static u32 bnx2_rv2p_proc1[] = {
0x00000008, 0xac000001, 0x0000000c, 0x2f800001, 0x00000010, 0x213f0004,
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2582d98..e0f51af 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -576,7 +576,7 @@
slave->duplex = DUPLEX_FULL;
if (slave_dev->ethtool_ops) {
- u32 res;
+ int res;
if (!slave_dev->ethtool_ops->get_settings) {
return -1;
@@ -1145,7 +1145,8 @@
}
#define BOND_INTERSECT_FEATURES \
- (NETIF_F_SG|NETIF_F_IP_CSUM|NETIF_F_NO_CSUM|NETIF_F_HW_CSUM)
+ (NETIF_F_SG|NETIF_F_IP_CSUM|NETIF_F_NO_CSUM|NETIF_F_HW_CSUM|\
+ NETIF_F_TSO|NETIF_F_UFO)
/*
* Compute the common dev->feature set available to all slaves. Some
@@ -1168,6 +1169,16 @@
NETIF_F_HW_CSUM)))
features &= ~NETIF_F_SG;
+ /*
+ * features will include NETIF_F_TSO (NETIF_F_UFO) iff all
+ * slave devices support NETIF_F_TSO (NETIF_F_UFO), which
+ * implies that all slaves also support scatter-gather
+ * (NETIF_F_SG), which implies that features also includes
+ * NETIF_F_SG. So no need to check whether we have an
+ * illegal combination of NETIF_F_{TSO,UFO} and
+ * !NETIF_F_SG
+ */
+
features |= (bond_dev->features & ~BOND_INTERSECT_FEATURES);
bond_dev->features = features;
@@ -4080,6 +4091,8 @@
static struct ethtool_ops bond_ethtool_ops = {
.get_tx_csum = ethtool_op_get_tx_csum,
+ .get_tso = ethtool_op_get_tso,
+ .get_ufo = ethtool_op_get_ufo,
.get_sg = ethtool_op_get_sg,
.get_drvinfo = bond_ethtool_get_drvinfo,
};
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 32d13da..041bcc5 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -260,7 +260,7 @@
char *ifname;
int i, res, found, ret = count;
struct slave *slave;
- struct net_device *dev = 0;
+ struct net_device *dev = NULL;
struct bonding *bond = to_bond(cd);
/* Quick sanity check -- is the bond interface up? */
@@ -995,7 +995,7 @@
printk(KERN_INFO DRV_NAME
": %s: Setting primary slave to None.\n",
bond->dev->name);
- bond->primary_slave = 0;
+ bond->primary_slave = NULL;
bond_select_active_slave(bond);
} else {
printk(KERN_INFO DRV_NAME
@@ -1123,7 +1123,7 @@
printk(KERN_INFO DRV_NAME
": %s: Setting active slave to None.\n",
bond->dev->name);
- bond->primary_slave = 0;
+ bond->primary_slave = NULL;
bond_select_active_slave(bond);
} else {
printk(KERN_INFO DRV_NAME
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index bf1fd2b..24253c8 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2752,8 +2752,6 @@
retval = pci_enable_wake(pdev, 0, 0);
if (retval)
DPRINTK(PROBE,ERR, "Error clearing wake events\n");
- if(e100_hw_init(nic))
- DPRINTK(HW, ERR, "e100_hw_init failed\n");
netif_device_attach(netdev);
if(netif_running(netdev))
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 0c18dbd..0e8e3fc 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -199,8 +199,7 @@
/* get a pointer to the register memory */
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->regs = (struct gfar *)
- ioremap(r->start, sizeof (struct gfar));
+ priv->regs = ioremap(r->start, sizeof (struct gfar));
if (NULL == priv->regs) {
err = -ENOMEM;
@@ -369,7 +368,7 @@
return 0;
register_fail:
- iounmap((void *) priv->regs);
+ iounmap(priv->regs);
regs_fail:
free_netdev(dev);
return err;
@@ -382,7 +381,7 @@
platform_set_drvdata(pdev, NULL);
- iounmap((void *) priv->regs);
+ iounmap(priv->regs);
free_netdev(dev);
return 0;
@@ -454,8 +453,7 @@
/* Zero out the rmon mib registers if it has them */
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
- memset((void *) &(priv->regs->rmon), 0,
- sizeof (struct rmon_mib));
+ memset_io(&(priv->regs->rmon), 0, sizeof (struct rmon_mib));
/* Mask off the CAM interrupts */
gfar_write(&priv->regs->rmon.cam1, 0xffffffff);
@@ -477,7 +475,7 @@
void gfar_halt(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regs = priv->regs;
+ struct gfar __iomem *regs = priv->regs;
u32 tempval;
/* Mask all interrupts */
@@ -507,7 +505,7 @@
void stop_gfar(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regs = priv->regs;
+ struct gfar __iomem *regs = priv->regs;
unsigned long flags;
phy_stop(priv->phydev);
@@ -590,7 +588,7 @@
void gfar_start(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regs = priv->regs;
+ struct gfar __iomem *regs = priv->regs;
u32 tempval;
/* Enable Rx and Tx in MACCFG1 */
@@ -624,7 +622,7 @@
unsigned long vaddr;
int i;
struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regs = priv->regs;
+ struct gfar __iomem *regs = priv->regs;
int err = 0;
u32 rctrl = 0;
u32 attrs = 0;
@@ -1622,7 +1620,7 @@
static void adjust_link(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regs = priv->regs;
+ struct gfar __iomem *regs = priv->regs;
unsigned long flags;
struct phy_device *phydev = priv->phydev;
int new_state = 0;
@@ -1703,7 +1701,7 @@
{
struct dev_mc_list *mc_ptr;
struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regs = priv->regs;
+ struct gfar __iomem *regs = priv->regs;
u32 tempval;
if(dev->flags & IFF_PROMISC) {
@@ -1842,7 +1840,7 @@
int idx;
char tmpbuf[MAC_ADDR_LEN];
u32 tempval;
- u32 *macptr = &priv->regs->macstnaddr1;
+ u32 __iomem *macptr = &priv->regs->macstnaddr1;
macptr += num*2;
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index cb9d66ac..d37d540 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -682,8 +682,8 @@
struct rxbd8 *cur_rx; /* Next free rx ring entry */
struct txbd8 *cur_tx; /* Next free ring entry */
struct txbd8 *dirty_tx; /* The Ring entry to be freed. */
- struct gfar *regs; /* Pointer to the GFAR memory mapped Registers */
- u32 *hash_regs[16];
+ struct gfar __iomem *regs; /* Pointer to the GFAR memory mapped Registers */
+ u32 __iomem *hash_regs[16];
int hash_width;
struct net_device_stats stats; /* linux network statistics */
struct gfar_extra_stats extra_stats;
@@ -718,14 +718,14 @@
uint32_t msg_enable;
};
-static inline u32 gfar_read(volatile unsigned *addr)
+static inline u32 gfar_read(volatile unsigned __iomem *addr)
{
u32 val;
val = in_be32(addr);
return val;
}
-static inline void gfar_write(volatile unsigned *addr, u32 val)
+static inline void gfar_write(volatile unsigned __iomem *addr, u32 val)
{
out_be32(addr, val);
}
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 765e810..5de7b2e 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -144,11 +144,11 @@
u64 *extra = (u64 *) & priv->extra_stats;
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
- u32 *rmon = (u32 *) & priv->regs->rmon;
+ u32 __iomem *rmon = (u32 __iomem *) & priv->regs->rmon;
struct gfar_stats *stats = (struct gfar_stats *) buf;
for (i = 0; i < GFAR_RMON_LEN; i++)
- stats->rmon[i] = (u64) (rmon[i]);
+ stats->rmon[i] = (u64) gfar_read(&rmon[i]);
for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++)
stats->extra[i] = extra[i];
@@ -221,11 +221,11 @@
{
int i;
struct gfar_private *priv = netdev_priv(dev);
- u32 *theregs = (u32 *) priv->regs;
+ u32 __iomem *theregs = (u32 __iomem *) priv->regs;
u32 *buf = (u32 *) regbuf;
for (i = 0; i < sizeof (struct gfar) / sizeof (u32); i++)
- buf[i] = theregs[i];
+ buf[i] = gfar_read(&theregs[i]);
}
/* Convert microseconds to ethernet clock ticks, which changes
diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c
index 74e52fc..c6b7255 100644
--- a/drivers/net/gianfar_mii.c
+++ b/drivers/net/gianfar_mii.c
@@ -50,7 +50,7 @@
* All PHY configuration is done through the TSEC1 MIIM regs */
int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
{
- struct gfar_mii *regs = bus->priv;
+ struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
/* Set the PHY address and the register address we want to write */
gfar_write(®s->miimadd, (mii_id << 8) | regnum);
@@ -70,7 +70,7 @@
* configuration has to be done through the TSEC1 MIIM regs */
int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
{
- struct gfar_mii *regs = bus->priv;
+ struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
u16 value;
/* Set the PHY address and the register address we want to read */
@@ -94,7 +94,7 @@
/* Reset the MIIM registers, and wait for the bus to free */
int gfar_mdio_reset(struct mii_bus *bus)
{
- struct gfar_mii *regs = bus->priv;
+ struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
unsigned int timeout = PHY_INIT_TIMEOUT;
spin_lock_bh(&bus->mdio_lock);
@@ -126,7 +126,7 @@
{
struct platform_device *pdev = to_platform_device(dev);
struct gianfar_mdio_data *pdata;
- struct gfar_mii *regs;
+ struct gfar_mii __iomem *regs;
struct mii_bus *new_bus;
struct resource *r;
int err = 0;
@@ -155,15 +155,14 @@
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
/* Set the PHY base address */
- regs = (struct gfar_mii *) ioremap(r->start,
- sizeof (struct gfar_mii));
+ regs = ioremap(r->start, sizeof (struct gfar_mii));
if (NULL == regs) {
err = -ENOMEM;
goto reg_map_fail;
}
- new_bus->priv = regs;
+ new_bus->priv = (void __force *)regs;
new_bus->irq = pdata->irq;
@@ -181,7 +180,7 @@
return 0;
bus_register_fail:
- iounmap((void *) regs);
+ iounmap(regs);
reg_map_fail:
kfree(new_bus);
@@ -197,7 +196,7 @@
dev_set_drvdata(dev, NULL);
- iounmap((void *) (&bus->priv));
+ iounmap((void __iomem *)bus->priv);
bus->priv = NULL;
kfree(bus);
diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c
index 3b1bef1..77411a0 100644
--- a/drivers/net/hamradio/baycom_par.c
+++ b/drivers/net/hamradio/baycom_par.c
@@ -86,7 +86,6 @@
#include <linux/bitops.h>
#include <linux/jiffies.h>
-#include <asm/bug.h>
#include <asm/system.h>
#include <asm/uaccess.h>
diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c
index 6139f06..94d5ea1 100644
--- a/drivers/net/lp486e.c
+++ b/drivers/net/lp486e.c
@@ -56,8 +56,6 @@
All other communication is through memory!
*/
-#define SLOW_DOWN_IO udelay(5)
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 40ae36b..c0998ef 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -32,6 +32,8 @@
*/
#include <linux/init.h>
#include <linux/dma-mapping.h>
+#include <linux/in.h>
+#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/etherdevice.h>
@@ -444,6 +446,7 @@
netif_rx(skb);
#endif
}
+ dev->last_rx = jiffies;
}
return received_packets;
@@ -461,7 +464,7 @@
*/
static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id,
- struct pt_regs *regs)
+ struct pt_regs *regs)
{
struct net_device *dev = (struct net_device *)dev_id;
struct mv643xx_private *mp = netdev_priv(dev);
@@ -1047,16 +1050,15 @@
static inline unsigned int has_tiny_unaligned_frags(struct sk_buff *skb)
{
- unsigned int frag;
- skb_frag_t *fragp;
+ unsigned int frag;
+ skb_frag_t *fragp;
- for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
- fragp = &skb_shinfo(skb)->frags[frag];
- if (fragp->size <= 8 && fragp->page_offset & 0x7)
- return 1;
-
- }
- return 0;
+ for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
+ fragp = &skb_shinfo(skb)->frags[frag];
+ if (fragp->size <= 8 && fragp->page_offset & 0x7)
+ return 1;
+ }
+ return 0;
}
@@ -2137,26 +2139,26 @@
*/
if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI)) {
for (table_index = 0; table_index <= 0xFC; table_index += 4) {
- /* Set all entries in DA filter special multicast
- * table (Ex_dFSMT)
- * Set for ETH_Q0 for now
- * Bits
- * 0 Accept=1, Drop=0
- * 3-1 Queue ETH_Q0=0
- * 7-4 Reserved = 0;
- */
- mv_write(MV643XX_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
+ /* Set all entries in DA filter special multicast
+ * table (Ex_dFSMT)
+ * Set for ETH_Q0 for now
+ * Bits
+ * 0 Accept=1, Drop=0
+ * 3-1 Queue ETH_Q0=0
+ * 7-4 Reserved = 0;
+ */
+ mv_write(MV643XX_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
- /* Set all entries in DA filter other multicast
- * table (Ex_dFOMT)
- * Set for ETH_Q0 for now
- * Bits
- * 0 Accept=1, Drop=0
- * 3-1 Queue ETH_Q0=0
- * 7-4 Reserved = 0;
- */
- mv_write(MV643XX_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
- }
+ /* Set all entries in DA filter other multicast
+ * table (Ex_dFOMT)
+ * Set for ETH_Q0 for now
+ * Bits
+ * 0 Accept=1, Drop=0
+ * 3-1 Queue ETH_Q0=0
+ * 7-4 Reserved = 0;
+ */
+ mv_write(MV643XX_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
+ }
return;
}
@@ -2617,7 +2619,6 @@
struct eth_tx_desc *current_descriptor;
struct eth_tx_desc *first_descriptor;
u32 command;
- unsigned long flags;
/* Do not process Tx ring in case of Tx ring resource error */
if (mp->tx_resource_err)
@@ -2634,8 +2635,6 @@
return ETH_ERROR;
}
- spin_lock_irqsave(&mp->lock, flags);
-
mp->tx_ring_skbs++;
BUG_ON(mp->tx_ring_skbs > mp->tx_ring_size);
@@ -2685,15 +2684,11 @@
mp->tx_resource_err = 1;
mp->tx_curr_desc_q = tx_first_desc;
- spin_unlock_irqrestore(&mp->lock, flags);
-
return ETH_QUEUE_LAST_RESOURCE;
}
mp->tx_curr_desc_q = tx_next_desc;
- spin_unlock_irqrestore(&mp->lock, flags);
-
return ETH_OK;
}
#else
@@ -2704,14 +2699,11 @@
int tx_desc_used;
struct eth_tx_desc *current_descriptor;
unsigned int command_status;
- unsigned long flags;
/* Do not process Tx ring in case of Tx ring resource error */
if (mp->tx_resource_err)
return ETH_QUEUE_FULL;
- spin_lock_irqsave(&mp->lock, flags);
-
mp->tx_ring_skbs++;
BUG_ON(mp->tx_ring_skbs > mp->tx_ring_size);
@@ -2742,12 +2734,9 @@
/* Check for ring index overlap in the Tx desc ring */
if (tx_desc_curr == tx_desc_used) {
mp->tx_resource_err = 1;
-
- spin_unlock_irqrestore(&mp->lock, flags);
return ETH_QUEUE_LAST_RESOURCE;
}
- spin_unlock_irqrestore(&mp->lock, flags);
return ETH_OK;
}
#endif
@@ -2898,8 +2887,10 @@
p_pkt_info->return_info = mp->rx_skb[rx_curr_desc];
p_pkt_info->l4i_chk = p_rx_desc->buf_size;
- /* Clean the return info field to indicate that the packet has been */
- /* moved to the upper layers */
+ /*
+ * Clean the return info field to indicate that the
+ * packet has been moved to the upper layers
+ */
mp->rx_skb[rx_curr_desc] = NULL;
/* Update current index in data structure */
@@ -2980,7 +2971,7 @@
};
#define MV643XX_STAT(m) sizeof(((struct mv643xx_private *)0)->m), \
- offsetof(struct mv643xx_private, m)
+ offsetof(struct mv643xx_private, m)
static const struct mv643xx_stats mv643xx_gstrings_stats[] = {
{ "rx_packets", MV643XX_STAT(stats.rx_packets) },
@@ -3131,9 +3122,8 @@
return 0;
}
-static void
-mv643xx_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *drvinfo)
+static void mv643xx_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
{
strncpy(drvinfo->driver, mv643xx_driver_name, 32);
strncpy(drvinfo->version, mv643xx_driver_version, 32);
@@ -3142,39 +3132,37 @@
drvinfo->n_stats = MV643XX_STATS_LEN;
}
-static int
-mv643xx_get_stats_count(struct net_device *netdev)
+static int mv643xx_get_stats_count(struct net_device *netdev)
{
return MV643XX_STATS_LEN;
}
-static void
-mv643xx_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, uint64_t *data)
+static void mv643xx_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, uint64_t *data)
{
struct mv643xx_private *mp = netdev->priv;
int i;
eth_update_mib_counters(mp);
- for(i = 0; i < MV643XX_STATS_LEN; i++) {
+ for (i = 0; i < MV643XX_STATS_LEN; i++) {
char *p = (char *)mp+mv643xx_gstrings_stats[i].stat_offset;
- data[i] = (mv643xx_gstrings_stats[i].sizeof_stat ==
+ data[i] = (mv643xx_gstrings_stats[i].sizeof_stat ==
sizeof(uint64_t)) ? *(uint64_t *)p : *(uint32_t *)p;
}
}
-static void
-mv643xx_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
+static void mv643xx_get_strings(struct net_device *netdev, uint32_t stringset,
+ uint8_t *data)
{
int i;
switch(stringset) {
case ETH_SS_STATS:
for (i=0; i < MV643XX_STATS_LEN; i++) {
- memcpy(data + i * ETH_GSTRING_LEN,
- mv643xx_gstrings_stats[i].stat_string,
- ETH_GSTRING_LEN);
+ memcpy(data + i * ETH_GSTRING_LEN,
+ mv643xx_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
}
break;
}
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 1c6d328..0245e40 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1610,6 +1610,8 @@
}
else if (!pskb_may_pull(skb, skb->len))
goto err;
+ else
+ skb->ip_summed = CHECKSUM_NONE;
len = slhc_uncompress(ppp->vj, skb->data + 2, skb->len - 2);
if (len <= 0) {
@@ -1690,6 +1692,7 @@
kfree_skb(skb);
} else {
skb_pull(skb, 2); /* chop off protocol */
+ skb_postpull_rcsum(skb, skb->data - 2, 2);
skb->dev = ppp->dev;
skb->protocol = htons(npindex_to_ethertype[npi]);
skb->mac.raw = skb->data;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 2e1bed15..6e10184 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -484,13 +484,12 @@
int i;
RTL_W32(PHYAR, 0x80000000 | (RegAddr & 0xFF) << 16 | value);
- udelay(1000);
- for (i = 2000; i > 0; i--) {
+ for (i = 20; i > 0; i--) {
/* Check if the RTL8169 has completed writing to the specified MII register */
if (!(RTL_R32(PHYAR) & 0x80000000))
break;
- udelay(100);
+ udelay(25);
}
}
@@ -499,15 +498,14 @@
int i, value = -1;
RTL_W32(PHYAR, 0x0 | (RegAddr & 0xFF) << 16);
- udelay(1000);
- for (i = 2000; i > 0; i--) {
+ for (i = 20; i > 0; i--) {
/* Check if the RTL8169 has completed retrieving data from the specified MII register */
if (RTL_R32(PHYAR) & 0x80000000) {
value = (int) (RTL_R32(PHYAR) & 0xFFFF);
break;
}
- udelay(100);
+ udelay(25);
}
return value;
}
@@ -677,6 +675,9 @@
if (duplex == DUPLEX_HALF)
auto_nego &= ~(PHY_Cap_10_Full | PHY_Cap_100_Full);
+
+ if (duplex == DUPLEX_FULL)
+ auto_nego &= ~(PHY_Cap_10_Half | PHY_Cap_100_Half);
}
tp->phy_auto_nego_reg = auto_nego;
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 89c4678..49b597c 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3586,7 +3586,7 @@
txdp->Buffer_Pointer = (u64) pci_map_page
(sp->pdev, frag->page, frag->page_offset,
frag->size, PCI_DMA_TODEVICE);
- txdp->Control_1 |= TXD_BUFFER0_SIZE(frag->size);
+ txdp->Control_1 = TXD_BUFFER0_SIZE(frag->size);
if (skb_shinfo(skb)->ufo_size)
txdp->Control_1 |= TXD_UFO_EN;
}
diff --git a/drivers/net/sis900.h b/drivers/net/sis900.h
index 4233ea5..5032394 100644
--- a/drivers/net/sis900.h
+++ b/drivers/net/sis900.h
@@ -33,7 +33,6 @@
rxcfg=0x34, //Receive Configuration Register
flctrl=0x38, //Flow Control Register
rxlen=0x3c, //Receive Packet Length Register
- cfgpmcsr=0x44, //Configuration Power Management Control/Status Register
rfcr=0x48, //Receive Filter Control Register
rfdr=0x4C, //Receive Filter Data Register
pmctrl=0xB0, //Power Management Control Register
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index f8b973a..cae2edf 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -23,12 +23,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/*
- * TOTEST
- * - speed setting
- * - suspend/resume
- */
-
#include <linux/config.h>
#include <linux/crc32.h>
#include <linux/kernel.h>
@@ -57,7 +51,7 @@
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "0.13"
+#define DRV_VERSION "0.15"
#define PFX DRV_NAME " "
/*
@@ -102,6 +96,10 @@
module_param(copybreak, int, 0);
MODULE_PARM_DESC(copybreak, "Receive copy threshold");
+static int disable_msi = 0;
+module_param(disable_msi, int, 0);
+MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
+
static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
@@ -198,7 +196,7 @@
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_PMC, &power_control);
- vaux = (sky2_read8(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
+ vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
(power_control & PCI_PM_CAP_PME_D3cold);
pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_CTRL, &power_control);
@@ -1834,6 +1832,8 @@
u16 hwidx;
u16 tx_done[2] = { TX_NO_STATUS, TX_NO_STATUS };
+ sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+
hwidx = sky2_read16(hw, STAT_PUT_IDX);
BUG_ON(hwidx >= STATUS_RING_SIZE);
rmb();
@@ -1913,12 +1913,10 @@
}
exit_loop:
- sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
-
sky2_tx_check(hw, 0, tx_done[0]);
sky2_tx_check(hw, 1, tx_done[1]);
- if (sky2_read16(hw, STAT_PUT_IDX) == hw->st_idx) {
+ if (likely(work_done < to_do)) {
/* need to restart TX timer */
if (is_ec_a1(hw)) {
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
@@ -2141,14 +2139,12 @@
static int sky2_reset(struct sky2_hw *hw)
{
- u32 ctst;
u16 status;
u8 t8, pmd_type;
- int i;
-
- ctst = sky2_read32(hw, B0_CTST);
+ int i, err;
sky2_write8(hw, B0_CTST, CS_RST_CLR);
+
hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) {
printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n",
@@ -2156,12 +2152,6 @@
return -EOPNOTSUPP;
}
- /* ring for status responses */
- hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,
- &hw->st_dma);
- if (!hw->st_le)
- return -ENOMEM;
-
/* disable ASF */
if (hw->chip_id <= CHIP_ID_YUKON_EC) {
sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
@@ -2173,19 +2163,24 @@
sky2_write8(hw, B0_CTST, CS_RST_CLR);
/* clear PCI errors, if any */
- pci_read_config_word(hw->pdev, PCI_STATUS, &status);
+ err = pci_read_config_word(hw->pdev, PCI_STATUS, &status);
+ if (err)
+ goto pci_err;
+
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- pci_write_config_word(hw->pdev, PCI_STATUS,
- status | PCI_STATUS_ERROR_BITS);
+ err = pci_write_config_word(hw->pdev, PCI_STATUS,
+ status | PCI_STATUS_ERROR_BITS);
+ if (err)
+ goto pci_err;
sky2_write8(hw, B0_CTST, CS_MRST_CLR);
/* clear any PEX errors */
- if (is_pciex(hw)) {
- u16 lstat;
- pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
- 0xffffffffUL);
- pci_read_config_word(hw->pdev, PEX_LNK_STAT, &lstat);
+ if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) {
+ err = pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
+ 0xffffffffUL);
+ if (err)
+ goto pci_err;
}
pmd_type = sky2_read8(hw, B2_PMD_TYP);
@@ -2297,6 +2292,14 @@
sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
return 0;
+
+pci_err:
+ /* This is to catch a BIOS bug workaround where
+ * mmconfig table doesn't have other buses.
+ */
+ printk(KERN_ERR PFX "%s: can't access PCI config space\n",
+ pci_name(hw->pdev));
+ return err;
}
static u32 sky2_supported_modes(const struct sky2_hw *hw)
@@ -2551,19 +2554,24 @@
static int sky2_set_mac_address(struct net_device *dev, void *p)
{
struct sky2_port *sky2 = netdev_priv(dev);
- struct sockaddr *addr = p;
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ const struct sockaddr *addr = p;
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
- memcpy_toio(sky2->hw->regs + B2_MAC_1 + sky2->port * 8,
+ memcpy_toio(hw->regs + B2_MAC_1 + port * 8,
dev->dev_addr, ETH_ALEN);
- memcpy_toio(sky2->hw->regs + B2_MAC_2 + sky2->port * 8,
+ memcpy_toio(hw->regs + B2_MAC_2 + port * 8,
dev->dev_addr, ETH_ALEN);
- if (netif_running(dev))
- sky2_phy_reinit(sky2);
+ /* virtual address for data */
+ gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
+
+ /* physical address: used for pause frames */
+ gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
return 0;
}
@@ -2843,7 +2851,7 @@
if (ecmd->rx_coalesce_usecs_irq == 0)
sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP);
else {
- sky2_write32(hw, STAT_TX_TIMER_INI,
+ sky2_write32(hw, STAT_ISR_TIMER_INI,
sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq));
sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
}
@@ -3055,6 +3063,61 @@
dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
}
+/* Handle software interrupt used during MSI test */
+static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ struct sky2_hw *hw = dev_id;
+ u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
+
+ if (status == 0)
+ return IRQ_NONE;
+
+ if (status & Y2_IS_IRQ_SW) {
+ sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
+ hw->msi = 1;
+ }
+ sky2_write32(hw, B0_Y2_SP_ICR, 2);
+
+ sky2_read32(hw, B0_IMSK);
+ return IRQ_HANDLED;
+}
+
+/* Test interrupt path by forcing a a software IRQ */
+static int __devinit sky2_test_msi(struct sky2_hw *hw)
+{
+ struct pci_dev *pdev = hw->pdev;
+ int i, err;
+
+ sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
+
+ err = request_irq(pdev->irq, sky2_test_intr, SA_SHIRQ, DRV_NAME, hw);
+ if (err) {
+ printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
+ pci_name(pdev), pdev->irq);
+ return err;
+ }
+
+ sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
+ wmb();
+
+ for (i = 0; i < 10; i++) {
+ barrier();
+ if (hw->msi)
+ goto found;
+ mdelay(1);
+ }
+
+ err = -EOPNOTSUPP;
+ sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
+ found:
+ sky2_write32(hw, B0_IMSK, 0);
+
+ free_irq(pdev->irq, hw);
+
+ return err;
+}
+
static int __devinit sky2_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -3135,6 +3198,12 @@
}
hw->pm_cap = pm_cap;
+ /* ring for status responses */
+ hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,
+ &hw->st_dma);
+ if (!hw->st_le)
+ goto err_out_iounmap;
+
err = sky2_reset(hw);
if (err)
goto err_out_iounmap;
@@ -3169,7 +3238,22 @@
}
}
- err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw);
+ if (!disable_msi && pci_enable_msi(pdev) == 0) {
+ err = sky2_test_msi(hw);
+ if (err == -EOPNOTSUPP) {
+ /* MSI test failed, go back to INTx mode */
+ printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
+ "switching to INTx mode. Please report this failure to "
+ "the PCI maintainer and include system chipset information.\n",
+ pci_name(pdev));
+ pci_disable_msi(pdev);
+ }
+ else if (err)
+ goto err_out_unregister;
+ }
+
+ err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ | SA_SAMPLE_RANDOM,
+ DRV_NAME, hw);
if (err) {
printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
pci_name(pdev), pdev->irq);
@@ -3184,6 +3268,8 @@
return 0;
err_out_unregister:
+ if (hw->msi)
+ pci_disable_msi(pdev);
if (dev1) {
unregister_netdev(dev1);
free_netdev(dev1);
@@ -3226,6 +3312,8 @@
sky2_read8(hw, B0_CTST);
free_irq(pdev->irq, hw);
+ if (hw->msi)
+ pci_disable_msi(pdev);
pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
pci_release_regions(pdev);
pci_disable_device(pdev);
@@ -3263,25 +3351,33 @@
static int sky2_resume(struct pci_dev *pdev)
{
struct sky2_hw *hw = pci_get_drvdata(pdev);
- int i;
+ int i, err;
pci_restore_state(pdev);
pci_enable_wake(pdev, PCI_D0, 0);
- sky2_set_power_state(hw, PCI_D0);
+ err = sky2_set_power_state(hw, PCI_D0);
+ if (err)
+ goto out;
- sky2_reset(hw);
+ err = sky2_reset(hw);
+ if (err)
+ goto out;
for (i = 0; i < 2; i++) {
struct net_device *dev = hw->dev[i];
- if (dev) {
- if (netif_running(dev)) {
- netif_device_attach(dev);
- if (sky2_up(dev))
- dev_close(dev);
+ if (dev && netif_running(dev)) {
+ netif_device_attach(dev);
+ err = sky2_up(dev);
+ if (err) {
+ printk(KERN_ERR PFX "%s: could not up: %d\n",
+ dev->name, err);
+ dev_close(dev);
+ break;
}
}
}
- return 0;
+out:
+ return err;
}
#endif
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 9551892..fd12c28 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1841,6 +1841,7 @@
struct net_device *dev[2];
int pm_cap;
+ int msi;
u8 chip_id;
u8 chip_rev;
u8 copper;
@@ -1867,14 +1868,6 @@
return readb(hw->regs + reg);
}
-/* This should probably go away, bus based tweeks suck */
-static inline int is_pciex(const struct sky2_hw *hw)
-{
- u32 status;
- pci_read_config_dword(hw->pdev, PCI_DEV_STATUS, &status);
- return (status & PCI_OS_PCI_X) == 0;
-}
-
static inline void sky2_write32(const struct sky2_hw *hw, unsigned reg, u32 val)
{
writel(val, hw->regs + reg);
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f2d1daf..e7dc653 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.48"
-#define DRV_MODULE_RELDATE "Jan 16, 2006"
+#define DRV_MODULE_VERSION "3.49"
+#define DRV_MODULE_RELDATE "Feb 2, 2006"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -3482,6 +3482,17 @@
struct tg3 *tp = _data;
unsigned int restart_timer;
+ tg3_full_lock(tp, 0);
+ tp->tg3_flags |= TG3_FLAG_IN_RESET_TASK;
+
+ if (!netif_running(tp->dev)) {
+ tp->tg3_flags &= ~TG3_FLAG_IN_RESET_TASK;
+ tg3_full_unlock(tp);
+ return;
+ }
+
+ tg3_full_unlock(tp);
+
tg3_netif_stop(tp);
tg3_full_lock(tp, 1);
@@ -3494,10 +3505,12 @@
tg3_netif_start(tp);
- tg3_full_unlock(tp);
-
if (restart_timer)
mod_timer(&tp->timer, jiffies + 1);
+
+ tp->tg3_flags &= ~TG3_FLAG_IN_RESET_TASK;
+
+ tg3_full_unlock(tp);
}
static void tg3_tx_timeout(struct net_device *dev)
@@ -6786,6 +6799,13 @@
{
struct tg3 *tp = netdev_priv(dev);
+ /* Calling flush_scheduled_work() may deadlock because
+ * linkwatch_event() may be on the workqueue and it will try to get
+ * the rtnl_lock which we are holding.
+ */
+ while (tp->tg3_flags & TG3_FLAG_IN_RESET_TASK)
+ msleep(1);
+
netif_stop_queue(dev);
del_timer_sync(&tp->timer);
@@ -10880,6 +10900,7 @@
if (dev) {
struct tg3 *tp = netdev_priv(dev);
+ flush_scheduled_work();
unregister_netdev(dev);
if (tp->regs) {
iounmap(tp->regs);
@@ -10901,6 +10922,7 @@
if (!netif_running(dev))
return 0;
+ flush_scheduled_work();
tg3_netif_stop(tp);
del_timer_sync(&tp->timer);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index e824330..7f4b7f6 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2162,6 +2162,7 @@
#define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000
#define TG3_FLAG_10_100_ONLY 0x01000000
#define TG3_FLAG_PAUSE_AUTONEG 0x02000000
+#define TG3_FLAG_IN_RESET_TASK 0x04000000
#define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000
#define TG3_FLAG_GOT_SERDES_FLOWCTL 0x20000000
#define TG3_FLAG_SPLIT_MODE 0x40000000
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 9839816..238e9c7 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -214,7 +214,7 @@
/* For module input parameter */
static int debug;
static u32 cr6set;
-static unsigned char mode = 8;
+static int mode = 8;
/* function declaration ------------------------------------- */
static int uli526x_open(struct net_device *);
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 2f61a47..1ff5de0 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -1943,7 +1943,7 @@
(++i%TX_RING_SIZE)*sizeof(*tx_fd));
} while (i < TX_RING_SIZE);
- if (dscc4_init_dummy_skb(dpriv) < 0)
+ if (!dscc4_init_dummy_skb(dpriv))
goto err_free_dma_tx;
memset(dpriv->rx_skbuff, 0, sizeof(struct sk_buff *)*RX_RING_SIZE);
diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c
index 8dea07b..eba8e5c 100644
--- a/drivers/net/wan/pci200syn.c
+++ b/drivers/net/wan/pci200syn.c
@@ -29,7 +29,7 @@
#include <linux/netdevice.h>
#include <linux/hdlc.h>
#include <linux/pci.h>
-#include <asm/delay.h>
+#include <linux/delay.h>
#include <asm/io.h>
#include "hd64572.h"
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index 9c1e106..9d3b51c 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -27,8 +27,8 @@
#include <linux/hdlc.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
+#include <linux/delay.h>
#include <asm/io.h>
-#include <asm/delay.h>
#include "wanxl.h"
diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig
index c8f6286..308f773 100644
--- a/drivers/net/wireless/hostap/Kconfig
+++ b/drivers/net/wireless/hostap/Kconfig
@@ -75,7 +75,7 @@
config HOSTAP_CS
tristate "Host AP driver for Prism2/2.5/3 PC Cards"
- depends on PCMCIA!=n && HOSTAP
+ depends on PCMCIA && HOSTAP
---help---
Host AP driver's version for Prism2/2.5/3 PC Cards.
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 8bf0276..6290c9f 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -2201,6 +2201,17 @@
#define SEARCH_SNAPSHOT 1
#define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
+static void ipw2100_snapshot_free(struct ipw2100_priv *priv)
+{
+ int i;
+ if (!priv->snapshot[0])
+ return;
+ for (i = 0; i < 0x30; i++)
+ kfree(priv->snapshot[i]);
+ priv->snapshot[0] = NULL;
+}
+
+#ifdef CONFIG_IPW2100_DEBUG_C3
static int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
{
int i;
@@ -2221,16 +2232,6 @@
return 1;
}
-static void ipw2100_snapshot_free(struct ipw2100_priv *priv)
-{
- int i;
- if (!priv->snapshot[0])
- return;
- for (i = 0; i < 0x30; i++)
- kfree(priv->snapshot[i]);
- priv->snapshot[0] = NULL;
-}
-
static u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 * in_buf,
size_t len, int mode)
{
@@ -2269,6 +2270,7 @@
return ret;
}
+#endif
/*
*
@@ -7112,11 +7114,17 @@
{
struct ipw2100_priv *priv = ieee80211_priv(dev);
int err = 0, value;
+
+ if (ipw_radio_kill_sw(priv, wrqu->txpower.disabled))
+ return -EINPROGRESS;
if (priv->ieee->iw_mode != IW_MODE_ADHOC)
+ return 0;
+
+ if ((wrqu->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
return -EINVAL;
- if (wrqu->txpower.disabled == 1 || wrqu->txpower.fixed == 0)
+ if (wrqu->txpower.fixed == 0)
value = IPW_TX_POWER_DEFAULT;
else {
if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM ||
@@ -7151,24 +7159,19 @@
struct ipw2100_priv *priv = ieee80211_priv(dev);
- if (priv->ieee->iw_mode != IW_MODE_ADHOC) {
- wrqu->power.disabled = 1;
- return 0;
- }
+ wrqu->txpower.disabled = (priv->status & STATUS_RF_KILL_MASK) ? 1 : 0;
if (priv->tx_power == IPW_TX_POWER_DEFAULT) {
- wrqu->power.fixed = 0;
- wrqu->power.value = IPW_TX_POWER_MAX_DBM;
- wrqu->power.disabled = 1;
+ wrqu->txpower.fixed = 0;
+ wrqu->txpower.value = IPW_TX_POWER_MAX_DBM;
} else {
- wrqu->power.disabled = 0;
- wrqu->power.fixed = 1;
- wrqu->power.value = priv->tx_power;
+ wrqu->txpower.fixed = 1;
+ wrqu->txpower.value = priv->tx_power;
}
- wrqu->power.flags = IW_TXPOW_DBM;
+ wrqu->txpower.flags = IW_TXPOW_DBM;
- IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->power.value);
+ IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->txpower.value);
return 0;
}
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 4c28e33..14beab4 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -2456,7 +2456,7 @@
copy. Otherwise let the firmware know to perform the operation
on it's own
*/
- if ((priv->eeprom + EEPROM_VERSION) != 0) {
+ if (priv->eeprom[EEPROM_VERSION] != 0) {
IPW_DEBUG_INFO("Writing EEPROM data into SRAM\n");
/* write the eeprom data to sram */
@@ -8012,6 +8012,10 @@
else
IPW_DEBUG_INFO("Auto adhoc creation disabled.\n");
+ priv->config &= ~CFG_STATIC_ESSID;
+ priv->essid_len = 0;
+ memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
+
if (disable) {
priv->status |= STATUS_RF_KILL_SW;
IPW_DEBUG_INFO("Radio disabled.\n");
@@ -11035,7 +11039,6 @@
net_dev->set_multicast_list = ipw_net_set_multicast_list;
net_dev->set_mac_address = ipw_net_set_mac_address;
priv->wireless_data.spy_data = &priv->ieee->spy_data;
- priv->wireless_data.ieee80211 = priv->ieee;
net_dev->wireless_data = &priv->wireless_data;
net_dev->wireless_handlers = &ipw_wx_handler_def;
net_dev->ethtool_ops = &ipw_ethtool_ops;
@@ -11121,8 +11124,8 @@
/* Free MAC hash list for ADHOC */
for (i = 0; i < IPW_IBSS_MAC_HASH_SIZE; i++) {
list_for_each_safe(p, q, &priv->ibss_mac_hash[i]) {
- kfree(list_entry(p, struct ipw_ibss_seq, list));
list_del(p);
+ kfree(list_entry(p, struct ipw_ibss_seq, list));
}
}
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index b664708..3c128b6 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -261,13 +261,13 @@
/* Note that the CIS values need to be rescaled */
if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, cfg CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
if (!ignore_cis_vcc)
goto next_entry;
}
} else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
+ DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, dflt CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
if(!ignore_cis_vcc)
goto next_entry;
}
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index c5cd61c..e5bb9f5 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -748,7 +748,7 @@
if (essid->length) {
dwrq->flags = 1; /* set ESSID to ON for Wireless Extensions */
/* if it is to big, trunk it */
- dwrq->length = min(IW_ESSID_MAX_SIZE, essid->length);
+ dwrq->length = min((u8)IW_ESSID_MAX_SIZE, essid->length);
} else {
dwrq->flags = 0;
dwrq->length = 0;
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 9e0229f..f46e843 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1423,7 +1423,7 @@
struct resource *res = ioc->mmio_region;
char *name = kmalloc(14, GFP_KERNEL);
- sprintf(name, "GSC Bus [%d/]", ioc->hw_path);
+ snprintf(name, 14, "GSC Bus [%d/]", ioc->hw_path);
ccio_init_resource(res, name, &ioc->ioc_regs->io_io_low);
ccio_init_resource(res + 1, name, &ioc->ioc_regs->io_io_low_hv);
@@ -1557,12 +1557,11 @@
int i;
struct ioc *ioc, **ioc_p = &ioc_list;
- ioc = kmalloc(sizeof(struct ioc), GFP_KERNEL);
+ ioc = kzalloc(sizeof(struct ioc), GFP_KERNEL);
if (ioc == NULL) {
printk(KERN_ERR MODULE_NAME ": memory allocation failure\n");
return 1;
}
- memset(ioc, 0, sizeof(struct ioc));
ioc->name = dev->id.hversion == U2_IOA_RUNWAY ? "U2" : "UTurn";
@@ -1578,7 +1577,7 @@
ccio_ioc_init(ioc);
ccio_init_resources(ioc);
hppa_dma_ops = &ccio_ops;
- dev->dev.platform_data = kmalloc(sizeof(struct pci_hba_data), GFP_KERNEL);
+ dev->dev.platform_data = kzalloc(sizeof(struct pci_hba_data), GFP_KERNEL);
/* if this fails, no I/O cards will work, so may as well bug */
BUG_ON(dev->dev.platform_data == NULL);
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 216d1d8..3d1a7f9 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -989,14 +989,12 @@
*/
}
- dino_dev = kmalloc(sizeof(struct dino_device), GFP_KERNEL);
+ dino_dev = kzalloc(sizeof(struct dino_device), GFP_KERNEL);
if (!dino_dev) {
printk("dino_init_chip - couldn't alloc dino_device\n");
return 1;
}
- memset(dino_dev, 0, sizeof(struct dino_device));
-
dino_dev->hba.dev = dev;
dino_dev->hba.base_addr = ioremap(hpa, 4096);
dino_dev->hba.lmmio_space_offset = 0; /* CPU addrs == bus addrs */
diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c
index 5edf93f..07dc2b6 100644
--- a/drivers/parisc/hppb.c
+++ b/drivers/parisc/hppb.c
@@ -60,12 +60,11 @@
}
if(card->hpa) {
- card->next = kmalloc(sizeof(struct hppb_card), GFP_KERNEL);
+ card->next = kzalloc(sizeof(struct hppb_card), GFP_KERNEL);
if(!card->next) {
printk(KERN_ERR "HP-PB: Unable to allocate memory.\n");
return 1;
}
- memset(card->next, '\0', sizeof(struct hppb_card));
card = card->next;
}
printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa.start);
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 19657ef..8d7a363 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -873,28 +873,24 @@
return NULL;
}
- isi = (struct iosapic_info *)kmalloc(sizeof(struct iosapic_info), GFP_KERNEL);
+ isi = (struct iosapic_info *)kzalloc(sizeof(struct iosapic_info), GFP_KERNEL);
if (!isi) {
BUG();
return NULL;
}
- memset(isi, 0, sizeof(struct iosapic_info));
-
isi->addr = ioremap(hpa, 4096);
isi->isi_hpa = hpa;
isi->isi_version = iosapic_rd_version(isi);
isi->isi_num_vectors = IOSAPIC_IRDT_MAX_ENTRY(isi->isi_version) + 1;
vip = isi->isi_vector = (struct vector_info *)
- kmalloc(sizeof(struct vector_info) * isi->isi_num_vectors, GFP_KERNEL);
+ kzalloc(sizeof(struct vector_info) * isi->isi_num_vectors, GFP_KERNEL);
if (vip == NULL) {
kfree(isi);
return NULL;
}
- memset(vip, 0, sizeof(struct vector_info) * isi->isi_num_vectors);
-
for (cnt=0; cnt < isi->isi_num_vectors; cnt++, vip++) {
vip->irqline = (unsigned char) cnt;
vip->iosapic = isi;
diff --git a/drivers/parisc/lasi.c b/drivers/parisc/lasi.c
index 2b3ba1d..cb3d281 100644
--- a/drivers/parisc/lasi.c
+++ b/drivers/parisc/lasi.c
@@ -166,11 +166,12 @@
int __init
lasi_init_chip(struct parisc_device *dev)
{
+ extern void (*chassis_power_off)(void);
struct gsc_asic *lasi;
struct gsc_irq gsc_irq;
int ret;
- lasi = kmalloc(sizeof(*lasi), GFP_KERNEL);
+ lasi = kzalloc(sizeof(*lasi), GFP_KERNEL);
if (!lasi)
return -ENOMEM;
@@ -222,7 +223,7 @@
* ensure that only the first LASI (the one controlling the power off)
* should set the HPA here */
lasi_power_off_hpa = lasi->hpa;
- pm_power_off = lasi_power_off;
+ chassis_power_off = lasi_power_off;
return ret;
}
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index cbae8c8..e8a2a4a 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -1565,7 +1565,7 @@
} else if (IS_MERCURY(dev) || IS_QUICKSILVER(dev)) {
func_class &= 0xff;
version = kmalloc(6, GFP_KERNEL);
- sprintf(version,"TR%d.%d",(func_class >> 4),(func_class & 0xf));
+ snprintf(version, 6, "TR%d.%d",(func_class >> 4),(func_class & 0xf));
/* We could use one printk for both Elroy and Mercury,
* but for the mask for func_class.
*/
@@ -1586,14 +1586,12 @@
** have an IRT entry will get NULL back from iosapic code.
*/
- lba_dev = kmalloc(sizeof(struct lba_device), GFP_KERNEL);
+ lba_dev = kzalloc(sizeof(struct lba_device), GFP_KERNEL);
if (!lba_dev) {
printk(KERN_ERR "lba_init_chip - couldn't alloc lba_device\n");
return(1);
}
- memset(lba_dev, 0, sizeof(struct lba_device));
-
/* ---------- First : initialize data we already have --------- */
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 42a3c54..a28e178 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -1,7 +1,7 @@
/*
* Interfaces to retrieve and set PDC Stable options (firmware)
*
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ * Copyright (C) 2005-2006 Thibaut VARENE <varenet@parisc-linux.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -26,11 +26,19 @@
*
* Since locations between 96 and 192 are the various paths, most (if not
* all) PA-RISC machines should have them. Anyway, for safety reasons, the
- * following code can deal with only 96 bytes of Stable Storage, and all
+ * following code can deal with just 96 bytes of Stable Storage, and all
* sizes between 96 and 192 bytes (provided they are multiple of struct
* device_path size, eg: 128, 160 and 192) to provide full information.
* The code makes no use of data above 192 bytes. One last word: there's one
* path we can always count on: the primary path.
+ *
+ * The current policy wrt file permissions is:
+ * - write: root only
+ * - read: (reading triggers PDC calls) ? root only : everyone
+ * The rationale is that PDC calls could hog (DoS) the machine.
+ *
+ * TODO:
+ * - timer/fastsize write calls
*/
#undef PDCS_DEBUG
@@ -50,13 +58,15 @@
#include <linux/kobject.h>
#include <linux/device.h>
#include <linux/errno.h>
+#include <linux/spinlock.h>
#include <asm/pdc.h>
#include <asm/page.h>
#include <asm/uaccess.h>
#include <asm/hardware.h>
-#define PDCS_VERSION "0.10"
+#define PDCS_VERSION "0.22"
+#define PDCS_PREFIX "PDC Stable Storage"
#define PDCS_ADDR_PPRI 0x00
#define PDCS_ADDR_OSID 0x40
@@ -70,10 +80,12 @@
MODULE_LICENSE("GPL");
MODULE_VERSION(PDCS_VERSION);
+/* holds Stable Storage size. Initialized once and for all, no lock needed */
static unsigned long pdcs_size __read_mostly;
/* This struct defines what we need to deal with a parisc pdc path entry */
struct pdcspath_entry {
+ rwlock_t rw_lock; /* to protect path entry access */
short ready; /* entry record is valid if != 0 */
unsigned long addr; /* entry address in stable storage */
char *name; /* entry name */
@@ -121,6 +133,8 @@
* content of the stable storage WRT various paths in these structs. We read
* these structs when reading the files, and we will write to these structs when
* writing to the files, and only then write them back to the Stable Storage.
+ *
+ * This function expects to be called with @entry->rw_lock write-hold.
*/
static int
pdcspath_fetch(struct pdcspath_entry *entry)
@@ -160,14 +174,15 @@
* pointer, from which it'll find out the corresponding hardware path.
* For now we do not handle the case where there's an error in writing to the
* Stable Storage area, so you'd better not mess up the data :P
+ *
+ * This function expects to be called with @entry->rw_lock write-hold.
*/
-static int
+static void
pdcspath_store(struct pdcspath_entry *entry)
{
struct device_path *devpath;
- if (!entry)
- return -EINVAL;
+ BUG_ON(!entry);
devpath = &entry->devpath;
@@ -176,10 +191,8 @@
First case, we don't have a preset hwpath... */
if (!entry->ready) {
/* ...but we have a device, map it */
- if (entry->dev)
- device_to_hwpath(entry->dev, (struct hardware_path *)devpath);
- else
- return -EINVAL;
+ BUG_ON(!entry->dev);
+ device_to_hwpath(entry->dev, (struct hardware_path *)devpath);
}
/* else, we expect the provided hwpath to be valid. */
@@ -191,15 +204,13 @@
printk(KERN_ERR "%s: an error occured when writing to PDC.\n"
"It is likely that the Stable Storage data has been corrupted.\n"
"Please check it carefully upon next reboot.\n", __func__);
- return -EIO;
+ WARN_ON(1);
}
/* kobject is already registered */
entry->ready = 2;
DPRINTK("%s: device: 0x%p\n", __func__, entry->dev);
-
- return 0;
}
/**
@@ -214,14 +225,17 @@
{
char *out = buf;
struct device_path *devpath;
- unsigned short i;
+ short i;
if (!entry || !buf)
return -EINVAL;
+ read_lock(&entry->rw_lock);
devpath = &entry->devpath;
+ i = entry->ready;
+ read_unlock(&entry->rw_lock);
- if (!entry->ready)
+ if (!i) /* entry is not ready */
return -ENODATA;
for (i = 0; i < 6; i++) {
@@ -242,7 +256,7 @@
*
* We will call this function to change the current hardware path.
* Hardware paths are to be given '/'-delimited, without brackets.
- * We take care to make sure that the provided path actually maps to an existing
+ * We make sure that the provided path actually maps to an existing
* device, BUT nothing would prevent some foolish user to set the path to some
* PCI bridge or even a CPU...
* A better work around would be to make sure we are at the end of a device tree
@@ -298,17 +312,19 @@
}
/* So far so good, let's get in deep */
+ write_lock(&entry->rw_lock);
entry->ready = 0;
entry->dev = dev;
/* Now, dive in. Write back to the hardware */
- WARN_ON(pdcspath_store(entry)); /* this warn should *NEVER* happen */
+ pdcspath_store(entry);
/* Update the symlink to the real device */
sysfs_remove_link(&entry->kobj, "device");
sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
+ write_unlock(&entry->rw_lock);
- printk(KERN_INFO "PDC Stable Storage: changed \"%s\" path to \"%s\"\n",
+ printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" path to \"%s\"\n",
entry->name, buf);
return count;
@@ -326,14 +342,17 @@
{
char *out = buf;
struct device_path *devpath;
- unsigned short i;
+ short i;
if (!entry || !buf)
return -EINVAL;
+ read_lock(&entry->rw_lock);
devpath = &entry->devpath;
+ i = entry->ready;
+ read_unlock(&entry->rw_lock);
- if (!entry->ready)
+ if (!i) /* entry is not ready */
return -ENODATA;
for (i = 0; devpath->layers[i] && (likely(i < 6)); i++)
@@ -388,15 +407,17 @@
}
/* So far so good, let's get in deep */
+ write_lock(&entry->rw_lock);
/* First, overwrite the current layers with the new ones, not touching
the hardware path. */
memcpy(&entry->devpath.layers, &layers, sizeof(layers));
/* Now, dive in. Write back to the hardware */
- WARN_ON(pdcspath_store(entry)); /* this warn should *NEVER* happen */
+ pdcspath_store(entry);
+ write_unlock(&entry->rw_lock);
- printk(KERN_INFO "PDC Stable Storage: changed \"%s\" layers to \"%s\"\n",
+ printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" layers to \"%s\"\n",
entry->name, buf);
return count;
@@ -415,9 +436,6 @@
struct pdcspath_attribute *pdcs_attr = to_pdcspath_attribute(attr);
ssize_t ret = 0;
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
-
if (pdcs_attr->show)
ret = pdcs_attr->show(entry, buf);
@@ -454,8 +472,8 @@
};
/* These are the two attributes of any PDC path. */
-static PATHS_ATTR(hwpath, 0600, pdcspath_hwpath_read, pdcspath_hwpath_write);
-static PATHS_ATTR(layer, 0600, pdcspath_layer_read, pdcspath_layer_write);
+static PATHS_ATTR(hwpath, 0644, pdcspath_hwpath_read, pdcspath_hwpath_write);
+static PATHS_ATTR(layer, 0644, pdcspath_layer_read, pdcspath_layer_write);
static struct attribute *paths_subsys_attrs[] = {
&paths_attr_hwpath.attr,
@@ -484,36 +502,119 @@
NULL,
};
+
+/* For more insight of what's going on here, refer to PDC Procedures doc,
+ * Section PDC_STABLE */
+
/**
- * pdcs_info_read - Pretty printing of the remaining useful data.
+ * pdcs_size_read - Stable Storage size output.
* @entry: An allocated and populated subsytem struct. We don't use it tho.
* @buf: The output buffer to write to.
- *
- * We will call this function to format the output of the 'info' attribute file.
- * Please refer to PDC Procedures documentation, section PDC_STABLE to get a
- * better insight of what we're doing here.
*/
static ssize_t
-pdcs_info_read(struct subsystem *entry, char *buf)
+pdcs_size_read(struct subsystem *entry, char *buf)
{
char *out = buf;
- __u32 result;
- struct device_path devpath;
- char *tmpstr = NULL;
if (!entry || !buf)
return -EINVAL;
/* show the size of the stable storage */
- out += sprintf(out, "Stable Storage size: %ld bytes\n", pdcs_size);
+ out += sprintf(out, "%ld\n", pdcs_size);
- /* deal with flags */
- if (pdc_stable_read(PDCS_ADDR_PPRI, &devpath, sizeof(devpath)) != PDC_OK)
- return -EIO;
+ return out - buf;
+}
+
+/**
+ * pdcs_auto_read - Stable Storage autoboot/search flag output.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ * @knob: The PF_AUTOBOOT or PF_AUTOSEARCH flag
+ */
+static ssize_t
+pdcs_auto_read(struct subsystem *entry, char *buf, int knob)
+{
+ char *out = buf;
+ struct pdcspath_entry *pathentry;
- out += sprintf(out, "Autoboot: %s\n", (devpath.flags & PF_AUTOBOOT) ? "On" : "Off");
- out += sprintf(out, "Autosearch: %s\n", (devpath.flags & PF_AUTOSEARCH) ? "On" : "Off");
- out += sprintf(out, "Timer: %u s\n", (devpath.flags & PF_TIMER) ? (1 << (devpath.flags & PF_TIMER)) : 0);
+ if (!entry || !buf)
+ return -EINVAL;
+
+ /* Current flags are stored in primary boot path entry */
+ pathentry = &pdcspath_entry_primary;
+
+ read_lock(&pathentry->rw_lock);
+ out += sprintf(out, "%s\n", (pathentry->devpath.flags & knob) ?
+ "On" : "Off");
+ read_unlock(&pathentry->rw_lock);
+
+ return out - buf;
+}
+
+/**
+ * pdcs_autoboot_read - Stable Storage autoboot flag output.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ */
+static inline ssize_t
+pdcs_autoboot_read(struct subsystem *entry, char *buf)
+{
+ return pdcs_auto_read(entry, buf, PF_AUTOBOOT);
+}
+
+/**
+ * pdcs_autosearch_read - Stable Storage autoboot flag output.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ */
+static inline ssize_t
+pdcs_autosearch_read(struct subsystem *entry, char *buf)
+{
+ return pdcs_auto_read(entry, buf, PF_AUTOSEARCH);
+}
+
+/**
+ * pdcs_timer_read - Stable Storage timer count output (in seconds).
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ *
+ * The value of the timer field correponds to a number of seconds in powers of 2.
+ */
+static ssize_t
+pdcs_timer_read(struct subsystem *entry, char *buf)
+{
+ char *out = buf;
+ struct pdcspath_entry *pathentry;
+
+ if (!entry || !buf)
+ return -EINVAL;
+
+ /* Current flags are stored in primary boot path entry */
+ pathentry = &pdcspath_entry_primary;
+
+ /* print the timer value in seconds */
+ read_lock(&pathentry->rw_lock);
+ out += sprintf(out, "%u\n", (pathentry->devpath.flags & PF_TIMER) ?
+ (1 << (pathentry->devpath.flags & PF_TIMER)) : 0);
+ read_unlock(&pathentry->rw_lock);
+
+ return out - buf;
+}
+
+/**
+ * pdcs_osid_read - Stable Storage OS ID register output.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ */
+static ssize_t
+pdcs_osid_read(struct subsystem *entry, char *buf)
+{
+ char *out = buf;
+ __u32 result;
+ char *tmpstr = NULL;
+
+ if (!entry || !buf)
+ return -EINVAL;
/* get OSID */
if (pdc_stable_read(PDCS_ADDR_OSID, &result, sizeof(result)) != PDC_OK)
@@ -529,13 +630,31 @@
case 0x0005: tmpstr = "Novell Netware dependent data"; break;
default: tmpstr = "Unknown"; break;
}
- out += sprintf(out, "OS ID: %s (0x%.4x)\n", tmpstr, (result >> 16));
+ out += sprintf(out, "%s (0x%.4x)\n", tmpstr, (result >> 16));
+
+ return out - buf;
+}
+
+/**
+ * pdcs_fastsize_read - Stable Storage FastSize register output.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ *
+ * This register holds the amount of system RAM to be tested during boot sequence.
+ */
+static ssize_t
+pdcs_fastsize_read(struct subsystem *entry, char *buf)
+{
+ char *out = buf;
+ __u32 result;
+
+ if (!entry || !buf)
+ return -EINVAL;
/* get fast-size */
if (pdc_stable_read(PDCS_ADDR_FSIZ, &result, sizeof(result)) != PDC_OK)
return -EIO;
- out += sprintf(out, "Memory tested: ");
if ((result & 0x0F) < 0x0E)
out += sprintf(out, "%d kB", (1<<(result & 0x0F))*256);
else
@@ -546,22 +665,18 @@
}
/**
- * pdcs_info_write - This function handles boot flag modifying.
+ * pdcs_auto_write - This function handles autoboot/search flag modifying.
* @entry: An allocated and populated subsytem struct. We don't use it tho.
* @buf: The input buffer to read from.
* @count: The number of bytes to be read.
+ * @knob: The PF_AUTOBOOT or PF_AUTOSEARCH flag
*
- * We will call this function to change the current boot flags.
+ * We will call this function to change the current autoboot flag.
* We expect a precise syntax:
- * \"n n\" (n == 0 or 1) to toggle respectively AutoBoot and AutoSearch
- *
- * As of now there is no incentive on my side to provide more "knobs" to that
- * interface, since modifying the rest of the data is pretty meaningless when
- * the machine is running and for the expected use of that facility, such as
- * PALO setting up the boot disk when installing a Linux distribution...
+ * \"n\" (n == 0 or 1) to toggle AutoBoot Off or On
*/
static ssize_t
-pdcs_info_write(struct subsystem *entry, const char *buf, size_t count)
+pdcs_auto_write(struct subsystem *entry, const char *buf, size_t count, int knob)
{
struct pdcspath_entry *pathentry;
unsigned char flags;
@@ -582,7 +697,9 @@
pathentry = &pdcspath_entry_primary;
/* Be nice to the existing flag record */
+ read_lock(&pathentry->rw_lock);
flags = pathentry->devpath.flags;
+ read_unlock(&pathentry->rw_lock);
DPRINTK("%s: flags before: 0x%X\n", __func__, flags);
@@ -595,50 +712,85 @@
if ((c != 0) && (c != 1))
goto parse_error;
if (c == 0)
- flags &= ~PF_AUTOBOOT;
+ flags &= ~knob;
else
- flags |= PF_AUTOBOOT;
-
- if (*temp++ != ' ')
- goto parse_error;
-
- c = *temp++ - '0';
- if ((c != 0) && (c != 1))
- goto parse_error;
- if (c == 0)
- flags &= ~PF_AUTOSEARCH;
- else
- flags |= PF_AUTOSEARCH;
+ flags |= knob;
DPRINTK("%s: flags after: 0x%X\n", __func__, flags);
/* So far so good, let's get in deep */
+ write_lock(&pathentry->rw_lock);
/* Change the path entry flags first */
pathentry->devpath.flags = flags;
/* Now, dive in. Write back to the hardware */
- WARN_ON(pdcspath_store(pathentry)); /* this warn should *NEVER* happen */
+ pdcspath_store(pathentry);
+ write_unlock(&pathentry->rw_lock);
- printk(KERN_INFO "PDC Stable Storage: changed flags to \"%s\"\n", buf);
+ printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" to \"%s\"\n",
+ (knob & PF_AUTOBOOT) ? "autoboot" : "autosearch",
+ (flags & knob) ? "On" : "Off");
return count;
parse_error:
- printk(KERN_WARNING "%s: Parse error: expect \"n n\" (n == 0 or 1) for AB and AS\n", __func__);
+ printk(KERN_WARNING "%s: Parse error: expect \"n\" (n == 0 or 1)\n", __func__);
return -EINVAL;
}
-/* The last attribute (the 'root' one actually) with all remaining data. */
-static PDCS_ATTR(info, 0600, pdcs_info_read, pdcs_info_write);
+/**
+ * pdcs_autoboot_write - This function handles autoboot flag modifying.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The input buffer to read from.
+ * @count: The number of bytes to be read.
+ *
+ * We will call this function to change the current boot flags.
+ * We expect a precise syntax:
+ * \"n\" (n == 0 or 1) to toggle AutoSearch Off or On
+ */
+static inline ssize_t
+pdcs_autoboot_write(struct subsystem *entry, const char *buf, size_t count)
+{
+ return pdcs_auto_write(entry, buf, count, PF_AUTOBOOT);
+}
+
+/**
+ * pdcs_autosearch_write - This function handles autosearch flag modifying.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The input buffer to read from.
+ * @count: The number of bytes to be read.
+ *
+ * We will call this function to change the current boot flags.
+ * We expect a precise syntax:
+ * \"n\" (n == 0 or 1) to toggle AutoSearch Off or On
+ */
+static inline ssize_t
+pdcs_autosearch_write(struct subsystem *entry, const char *buf, size_t count)
+{
+ return pdcs_auto_write(entry, buf, count, PF_AUTOSEARCH);
+}
+
+/* The remaining attributes. */
+static PDCS_ATTR(size, 0444, pdcs_size_read, NULL);
+static PDCS_ATTR(autoboot, 0644, pdcs_autoboot_read, pdcs_autoboot_write);
+static PDCS_ATTR(autosearch, 0644, pdcs_autosearch_read, pdcs_autosearch_write);
+static PDCS_ATTR(timer, 0444, pdcs_timer_read, NULL);
+static PDCS_ATTR(osid, 0400, pdcs_osid_read, NULL);
+static PDCS_ATTR(fastsize, 0400, pdcs_fastsize_read, NULL);
static struct subsys_attribute *pdcs_subsys_attrs[] = {
- &pdcs_attr_info,
- NULL, /* maybe more in the future? */
+ &pdcs_attr_size,
+ &pdcs_attr_autoboot,
+ &pdcs_attr_autosearch,
+ &pdcs_attr_timer,
+ &pdcs_attr_osid,
+ &pdcs_attr_fastsize,
+ NULL,
};
static decl_subsys(paths, &ktype_pdcspath, NULL);
-static decl_subsys(pdc, NULL, NULL);
+static decl_subsys(stable, NULL, NULL);
/**
* pdcs_register_pathentries - Prepares path entries kobjects for sysfs usage.
@@ -656,8 +808,16 @@
struct pdcspath_entry *entry;
int err;
+ /* Initialize the entries rw_lock before anything else */
+ for (i = 0; (entry = pdcspath_entries[i]); i++)
+ rwlock_init(&entry->rw_lock);
+
for (i = 0; (entry = pdcspath_entries[i]); i++) {
- if (pdcspath_fetch(entry) < 0)
+ write_lock(&entry->rw_lock);
+ err = pdcspath_fetch(entry);
+ write_unlock(&entry->rw_lock);
+
+ if (err < 0)
continue;
if ((err = kobject_set_name(&entry->kobj, "%s", entry->name)))
@@ -667,13 +827,14 @@
return err;
/* kobject is now registered */
+ write_lock(&entry->rw_lock);
entry->ready = 2;
- if (!entry->dev)
- continue;
-
/* Add a nice symlink to the real device */
- sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
+ if (entry->dev)
+ sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
+
+ write_unlock(&entry->rw_lock);
}
return 0;
@@ -688,14 +849,17 @@
unsigned short i;
struct pdcspath_entry *entry;
- for (i = 0; (entry = pdcspath_entries[i]); i++)
+ for (i = 0; (entry = pdcspath_entries[i]); i++) {
+ read_lock(&entry->rw_lock);
if (entry->ready >= 2)
- kobject_unregister(&entry->kobj);
+ kobject_unregister(&entry->kobj);
+ read_unlock(&entry->rw_lock);
+ }
}
/*
- * For now we register the pdc subsystem with the firmware subsystem
- * and the paths subsystem with the pdc subsystem
+ * For now we register the stable subsystem with the firmware subsystem
+ * and the paths subsystem with the stable subsystem
*/
static int __init
pdc_stable_init(void)
@@ -707,19 +871,23 @@
if (pdc_stable_get_size(&pdcs_size) != PDC_OK)
return -ENODEV;
- printk(KERN_INFO "PDC Stable Storage facility v%s\n", PDCS_VERSION);
+ /* make sure we have enough data */
+ if (pdcs_size < 96)
+ return -ENODATA;
- /* For now we'll register the pdc subsys within this driver */
- if ((rc = firmware_register(&pdc_subsys)))
+ printk(KERN_INFO PDCS_PREFIX " facility v%s\n", PDCS_VERSION);
+
+ /* For now we'll register the stable subsys within this driver */
+ if ((rc = firmware_register(&stable_subsys)))
goto fail_firmreg;
- /* Don't forget the info entry */
+ /* Don't forget the root entries */
for (i = 0; (attr = pdcs_subsys_attrs[i]) && !error; i++)
if (attr->show)
- error = subsys_create_file(&pdc_subsys, attr);
+ error = subsys_create_file(&stable_subsys, attr);
- /* register the paths subsys as a subsystem of pdc subsys */
- kset_set_kset_s(&paths_subsys, pdc_subsys);
+ /* register the paths subsys as a subsystem of stable subsys */
+ kset_set_kset_s(&paths_subsys, stable_subsys);
if ((rc= subsystem_register(&paths_subsys)))
goto fail_subsysreg;
@@ -734,10 +902,10 @@
subsystem_unregister(&paths_subsys);
fail_subsysreg:
- firmware_unregister(&pdc_subsys);
+ firmware_unregister(&stable_subsys);
fail_firmreg:
- printk(KERN_INFO "PDC Stable Storage bailing out\n");
+ printk(KERN_INFO PDCS_PREFIX " bailing out\n");
return rc;
}
@@ -747,7 +915,7 @@
pdcs_unregister_pathentries();
subsystem_unregister(&paths_subsys);
- firmware_unregister(&pdc_subsys);
+ firmware_unregister(&stable_subsys);
}
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index c85653f..52f265e 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -2064,14 +2064,13 @@
printk(KERN_INFO "%s found %s at 0x%lx\n",
MODULE_NAME, version, dev->hpa.start);
- sba_dev = kmalloc(sizeof(struct sba_device), GFP_KERNEL);
+ sba_dev = kzalloc(sizeof(struct sba_device), GFP_KERNEL);
if (!sba_dev) {
printk(KERN_ERR MODULE_NAME " - couldn't alloc sba_device\n");
return -ENOMEM;
}
parisc_set_drvdata(dev, sba_dev);
- memset(sba_dev, 0, sizeof(struct sba_device));
for(i=0; i<MAX_IOC; i++)
spin_lock_init(&(sba_dev->ioc[i].res_lock));
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index d14888e..ba971fe 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -89,6 +89,9 @@
#define DBG_INIT(x...)
#endif
+#define SUPERIO "SuperIO"
+#define PFX SUPERIO ": "
+
static irqreturn_t
superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
{
@@ -117,7 +120,7 @@
local_irq = results & 0x0f;
if (local_irq == 2 || local_irq > 7) {
- printk(KERN_ERR "SuperIO: slave interrupted!\n");
+ printk(KERN_ERR PFX "slave interrupted!\n");
return IRQ_HANDLED;
}
@@ -128,7 +131,7 @@
outb(OCW3_ISR,IC_PIC1+0);
results = inb(IC_PIC1+0);
if ((results & 0x80) == 0) { /* if ISR7 not set: spurious */
- printk(KERN_WARNING "SuperIO: spurious interrupt!\n");
+ printk(KERN_WARNING PFX "spurious interrupt!\n");
return IRQ_HANDLED;
}
}
@@ -163,27 +166,27 @@
/* ...then properly fixup the USB to point at suckyio PIC */
sio->usb_pdev->irq = superio_fixup_irq(sio->usb_pdev);
- printk(KERN_INFO "SuperIO: Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
+ printk(KERN_INFO PFX "Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
pci_name(pdev), pdev->irq);
pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base);
sio->sp1_base &= ~1;
- printk (KERN_INFO "SuperIO: Serial port 1 at 0x%x\n", sio->sp1_base);
+ printk(KERN_INFO PFX "Serial port 1 at 0x%x\n", sio->sp1_base);
pci_read_config_dword (pdev, SIO_SP2BAR, &sio->sp2_base);
sio->sp2_base &= ~1;
- printk (KERN_INFO "SuperIO: Serial port 2 at 0x%x\n", sio->sp2_base);
+ printk(KERN_INFO PFX "Serial port 2 at 0x%x\n", sio->sp2_base);
pci_read_config_dword (pdev, SIO_PPBAR, &sio->pp_base);
sio->pp_base &= ~1;
- printk (KERN_INFO "SuperIO: Parallel port at 0x%x\n", sio->pp_base);
+ printk(KERN_INFO PFX "Parallel port at 0x%x\n", sio->pp_base);
pci_read_config_dword (pdev, SIO_FDCBAR, &sio->fdc_base);
sio->fdc_base &= ~1;
- printk (KERN_INFO "SuperIO: Floppy controller at 0x%x\n", sio->fdc_base);
+ printk(KERN_INFO PFX "Floppy controller at 0x%x\n", sio->fdc_base);
pci_read_config_dword (pdev, SIO_ACPIBAR, &sio->acpi_base);
sio->acpi_base &= ~1;
- printk (KERN_INFO "SuperIO: ACPI at 0x%x\n", sio->acpi_base);
+ printk(KERN_INFO PFX "ACPI at 0x%x\n", sio->acpi_base);
request_region (IC_PIC1, 0x1f, "pic1");
request_region (IC_PIC2, 0x1f, "pic2");
@@ -263,14 +266,14 @@
/* Setup USB power regulation */
outb(1, sio->acpi_base + USB_REG_CR);
if (inb(sio->acpi_base + USB_REG_CR) & 1)
- printk(KERN_INFO "SuperIO: USB regulator enabled\n");
+ printk(KERN_INFO PFX "USB regulator enabled\n");
else
- printk(KERN_ERR "USB regulator not initialized!\n");
+ printk(KERN_ERR PFX "USB regulator not initialized!\n");
if (request_irq(pdev->irq, superio_interrupt, SA_INTERRUPT,
- "SuperIO", (void *)sio)) {
+ SUPERIO, (void *)sio)) {
- printk(KERN_ERR "SuperIO: could not get irq\n");
+ printk(KERN_ERR PFX "could not get irq\n");
BUG();
return;
}
@@ -284,7 +287,7 @@
u8 r8;
if ((irq < 1) || (irq == 2) || (irq > 7)) {
- printk(KERN_ERR "SuperIO: Illegal irq number.\n");
+ printk(KERN_ERR PFX "Illegal irq number.\n");
BUG();
return;
}
@@ -301,7 +304,7 @@
u8 r8;
if ((irq < 1) || (irq == 2) || (irq > 7)) {
- printk(KERN_ERR "SuperIO: Illegal irq number (%d).\n", irq);
+ printk(KERN_ERR PFX "Illegal irq number (%d).\n", irq);
BUG();
return;
}
@@ -319,7 +322,7 @@
}
static struct hw_interrupt_type superio_interrupt_type = {
- .typename = "SuperIO",
+ .typename = SUPERIO,
.startup = superio_startup_irq,
.shutdown = superio_disable_irq,
.enable = superio_enable_irq,
@@ -413,7 +416,7 @@
retval = early_serial_setup(&serial[0]);
if (retval < 0) {
- printk(KERN_WARNING "SuperIO: Register Serial #0 failed.\n");
+ printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
return;
}
@@ -423,7 +426,7 @@
retval = early_serial_setup(&serial[1]);
if (retval < 0)
- printk(KERN_WARNING "SuperIO: Register Serial #1 failed.\n");
+ printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
#endif /* CONFIG_SERIAL_8250 */
}
@@ -437,7 +440,7 @@
PARPORT_DMA_NONE /* dma */,
NULL /*struct pci_dev* */) )
- printk(KERN_WARNING "SuperIO: Probing parallel port failed.\n");
+ printk(KERN_WARNING PFX "Probing parallel port failed.\n");
#endif /* CONFIG_PARPORT_PC */
}
@@ -499,7 +502,7 @@
};
static struct pci_driver superio_driver = {
- .name = "SuperIO",
+ .name = SUPERIO,
.id_table = superio_tbl,
.probe = superio_probe,
};
diff --git a/drivers/parisc/wax.c b/drivers/parisc/wax.c
index 17dce2a..813c2c2 100644
--- a/drivers/parisc/wax.c
+++ b/drivers/parisc/wax.c
@@ -76,7 +76,7 @@
struct gsc_irq gsc_irq;
int ret;
- wax = kmalloc(sizeof(*wax), GFP_KERNEL);
+ wax = kzalloc(sizeof(*wax), GFP_KERNEL);
if (!wax)
return -ENOMEM;
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index f605dea..f63c387 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -90,6 +90,15 @@
depends on ARM && PARPORT
select PARPORT_NOT_PC
+config PARPORT_IP32
+ tristate "SGI IP32 builtin port (EXPERIMENTAL)"
+ depends on SGI_IP32 && PARPORT && EXPERIMENTAL
+ select PARPORT_NOT_PC
+ help
+ Say Y here if you need support for the parallel port on
+ SGI O2 machines. This code is also available as a module (say M),
+ called parport_ip32. If in doubt, saying N is the safe plan.
+
config PARPORT_AMIGA
tristate "Amiga builtin port"
depends on AMIGA && PARPORT
diff --git a/drivers/parport/Makefile b/drivers/parport/Makefile
index 5372212..a19de35 100644
--- a/drivers/parport/Makefile
+++ b/drivers/parport/Makefile
@@ -17,3 +17,4 @@
obj-$(CONFIG_PARPORT_ATARI) += parport_atari.o
obj-$(CONFIG_PARPORT_SUNBPP) += parport_sunbpp.o
obj-$(CONFIG_PARPORT_GSC) += parport_gsc.o
+obj-$(CONFIG_PARPORT_IP32) += parport_ip32.o
diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c
index 5b887ba..690b239 100644
--- a/drivers/parport/ieee1284.c
+++ b/drivers/parport/ieee1284.c
@@ -61,10 +61,10 @@
* set to zero, it returns immediately.
*
* If an interrupt occurs before the timeout period elapses, this
- * function returns one immediately. If it times out, it returns
- * a value greater than zero. An error code less than zero
- * indicates an error (most likely a pending signal), and the
- * calling code should finish what it's doing as soon as it can.
+ * function returns zero immediately. If it times out, it returns
+ * one. An error code less than zero indicates an error (most
+ * likely a pending signal), and the calling code should finish
+ * what it's doing as soon as it can.
*/
int parport_wait_event (struct parport *port, signed long timeout)
@@ -110,7 +110,7 @@
*
* If the status lines take on the desired values before the
* timeout period elapses, parport_poll_peripheral() returns zero
- * immediately. A zero return value greater than zero indicates
+ * immediately. A return value greater than zero indicates
* a timeout. An error code (less than zero) indicates an error,
* most likely a signal that arrived, and the caller should
* finish what it is doing as soon as possible.
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index fde29a7..1de52d9 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -249,7 +249,7 @@
struct parport tmp;
struct parport *p = &tmp;
- priv = kmalloc (sizeof (struct parport_gsc_private), GFP_KERNEL);
+ priv = kzalloc (sizeof (struct parport_gsc_private), GFP_KERNEL);
if (!priv) {
printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
return NULL;
diff --git a/drivers/parport/parport_ip32.c b/drivers/parport/parport_ip32.c
new file mode 100644
index 0000000..46e06e5
--- /dev/null
+++ b/drivers/parport/parport_ip32.c
@@ -0,0 +1,2253 @@
+/* Low-level parallel port routines for built-in port on SGI IP32
+ *
+ * Author: Arnaud Giersch <arnaud.giersch@free.fr>
+ *
+ * Based on parport_pc.c by
+ * Phil Blundell, Tim Waugh, Jose Renau, David Campbell,
+ * Andrea Arcangeli, et al.
+ *
+ * Thanks to Ilya A. Volynets-Evenbakh for his help.
+ *
+ * Copyright (C) 2005, 2006 Arnaud Giersch.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* Current status:
+ *
+ * Basic SPP and PS2 modes are supported.
+ * Support for parallel port IRQ is present.
+ * Hardware SPP (a.k.a. compatibility), EPP, and ECP modes are
+ * supported.
+ * SPP/ECP FIFO can be driven in PIO or DMA mode. PIO mode can work with
+ * or without interrupt support.
+ *
+ * Hardware ECP mode is not fully implemented (ecp_read_data and
+ * ecp_write_addr are actually missing).
+ *
+ * To do:
+ *
+ * Fully implement ECP mode.
+ * EPP and ECP mode need to be tested. I currently do not own any
+ * peripheral supporting these extended mode, and cannot test them.
+ * If DMA mode works well, decide if support for PIO FIFO modes should be
+ * dropped.
+ * Use the io{read,write} family functions when they become available in
+ * the linux-mips.org tree. Note: the MIPS specific functions readsb()
+ * and writesb() are to be translated by ioread8_rep() and iowrite8_rep()
+ * respectively.
+ */
+
+/* The built-in parallel port on the SGI 02 workstation (a.k.a. IP32) is an
+ * IEEE 1284 parallel port driven by a Texas Instrument TL16PIR552PH chip[1].
+ * This chip supports SPP, bidirectional, EPP and ECP modes. It has a 16 byte
+ * FIFO buffer and supports DMA transfers.
+ *
+ * [1] http://focus.ti.com/docs/prod/folders/print/tl16pir552.html
+ *
+ * Theoretically, we could simply use the parport_pc module. It is however
+ * not so simple. The parport_pc code assumes that the parallel port
+ * registers are port-mapped. On the O2, they are memory-mapped.
+ * Furthermore, each register is replicated on 256 consecutive addresses (as
+ * it is for the built-in serial ports on the same chip).
+ */
+
+/*--- Some configuration defines ---------------------------------------*/
+
+/* DEBUG_PARPORT_IP32
+ * 0 disable debug
+ * 1 standard level: pr_debug1 is enabled
+ * 2 parport_ip32_dump_state is enabled
+ * >=3 verbose level: pr_debug is enabled
+ */
+#if !defined(DEBUG_PARPORT_IP32)
+# define DEBUG_PARPORT_IP32 0 /* 0 (disabled) for production */
+#endif
+
+/*----------------------------------------------------------------------*/
+
+/* Setup DEBUG macros. This is done before any includes, just in case we
+ * activate pr_debug() with DEBUG_PARPORT_IP32 >= 3.
+ */
+#if DEBUG_PARPORT_IP32 == 1
+# warning DEBUG_PARPORT_IP32 == 1
+#elif DEBUG_PARPORT_IP32 == 2
+# warning DEBUG_PARPORT_IP32 == 2
+#elif DEBUG_PARPORT_IP32 >= 3
+# warning DEBUG_PARPORT_IP32 >= 3
+# if !defined(DEBUG)
+# define DEBUG /* enable pr_debug() in kernel.h */
+# endif
+#endif
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/ip32/ip32_ints.h>
+#include <asm/ip32/mace.h>
+
+/*--- Global variables -------------------------------------------------*/
+
+/* Verbose probing on by default for debugging. */
+#if DEBUG_PARPORT_IP32 >= 1
+# define DEFAULT_VERBOSE_PROBING 1
+#else
+# define DEFAULT_VERBOSE_PROBING 0
+#endif
+
+/* Default prefix for printk */
+#define PPIP32 "parport_ip32: "
+
+/*
+ * These are the module parameters:
+ * @features: bit mask of features to enable/disable
+ * (all enabled by default)
+ * @verbose_probing: log chit-chat during initialization
+ */
+#define PARPORT_IP32_ENABLE_IRQ (1U << 0)
+#define PARPORT_IP32_ENABLE_DMA (1U << 1)
+#define PARPORT_IP32_ENABLE_SPP (1U << 2)
+#define PARPORT_IP32_ENABLE_EPP (1U << 3)
+#define PARPORT_IP32_ENABLE_ECP (1U << 4)
+static unsigned int features = ~0U;
+static int verbose_probing = DEFAULT_VERBOSE_PROBING;
+
+/* We do not support more than one port. */
+static struct parport *this_port = NULL;
+
+/* Timing constants for FIFO modes. */
+#define FIFO_NFAULT_TIMEOUT 100 /* milliseconds */
+#define FIFO_POLLING_INTERVAL 50 /* microseconds */
+
+/*--- I/O register definitions -----------------------------------------*/
+
+/**
+ * struct parport_ip32_regs - virtual addresses of parallel port registers
+ * @data: Data Register
+ * @dsr: Device Status Register
+ * @dcr: Device Control Register
+ * @eppAddr: EPP Address Register
+ * @eppData0: EPP Data Register 0
+ * @eppData1: EPP Data Register 1
+ * @eppData2: EPP Data Register 2
+ * @eppData3: EPP Data Register 3
+ * @ecpAFifo: ECP Address FIFO
+ * @fifo: General FIFO register. The same address is used for:
+ * - cFifo, the Parallel Port DATA FIFO
+ * - ecpDFifo, the ECP Data FIFO
+ * - tFifo, the ECP Test FIFO
+ * @cnfgA: Configuration Register A
+ * @cnfgB: Configuration Register B
+ * @ecr: Extended Control Register
+ */
+struct parport_ip32_regs {
+ void __iomem *data;
+ void __iomem *dsr;
+ void __iomem *dcr;
+ void __iomem *eppAddr;
+ void __iomem *eppData0;
+ void __iomem *eppData1;
+ void __iomem *eppData2;
+ void __iomem *eppData3;
+ void __iomem *ecpAFifo;
+ void __iomem *fifo;
+ void __iomem *cnfgA;
+ void __iomem *cnfgB;
+ void __iomem *ecr;
+};
+
+/* Device Status Register */
+#define DSR_nBUSY (1U << 7) /* PARPORT_STATUS_BUSY */
+#define DSR_nACK (1U << 6) /* PARPORT_STATUS_ACK */
+#define DSR_PERROR (1U << 5) /* PARPORT_STATUS_PAPEROUT */
+#define DSR_SELECT (1U << 4) /* PARPORT_STATUS_SELECT */
+#define DSR_nFAULT (1U << 3) /* PARPORT_STATUS_ERROR */
+#define DSR_nPRINT (1U << 2) /* specific to TL16PIR552 */
+/* #define DSR_reserved (1U << 1) */
+#define DSR_TIMEOUT (1U << 0) /* EPP timeout */
+
+/* Device Control Register */
+/* #define DCR_reserved (1U << 7) | (1U << 6) */
+#define DCR_DIR (1U << 5) /* direction */
+#define DCR_IRQ (1U << 4) /* interrupt on nAck */
+#define DCR_SELECT (1U << 3) /* PARPORT_CONTROL_SELECT */
+#define DCR_nINIT (1U << 2) /* PARPORT_CONTROL_INIT */
+#define DCR_AUTOFD (1U << 1) /* PARPORT_CONTROL_AUTOFD */
+#define DCR_STROBE (1U << 0) /* PARPORT_CONTROL_STROBE */
+
+/* ECP Configuration Register A */
+#define CNFGA_IRQ (1U << 7)
+#define CNFGA_ID_MASK ((1U << 6) | (1U << 5) | (1U << 4))
+#define CNFGA_ID_SHIFT 4
+#define CNFGA_ID_16 (00U << CNFGA_ID_SHIFT)
+#define CNFGA_ID_8 (01U << CNFGA_ID_SHIFT)
+#define CNFGA_ID_32 (02U << CNFGA_ID_SHIFT)
+/* #define CNFGA_reserved (1U << 3) */
+#define CNFGA_nBYTEINTRANS (1U << 2)
+#define CNFGA_PWORDLEFT ((1U << 1) | (1U << 0))
+
+/* ECP Configuration Register B */
+#define CNFGB_COMPRESS (1U << 7)
+#define CNFGB_INTRVAL (1U << 6)
+#define CNFGB_IRQ_MASK ((1U << 5) | (1U << 4) | (1U << 3))
+#define CNFGB_IRQ_SHIFT 3
+#define CNFGB_DMA_MASK ((1U << 2) | (1U << 1) | (1U << 0))
+#define CNFGB_DMA_SHIFT 0
+
+/* Extended Control Register */
+#define ECR_MODE_MASK ((1U << 7) | (1U << 6) | (1U << 5))
+#define ECR_MODE_SHIFT 5
+#define ECR_MODE_SPP (00U << ECR_MODE_SHIFT)
+#define ECR_MODE_PS2 (01U << ECR_MODE_SHIFT)
+#define ECR_MODE_PPF (02U << ECR_MODE_SHIFT)
+#define ECR_MODE_ECP (03U << ECR_MODE_SHIFT)
+#define ECR_MODE_EPP (04U << ECR_MODE_SHIFT)
+/* #define ECR_MODE_reserved (05U << ECR_MODE_SHIFT) */
+#define ECR_MODE_TST (06U << ECR_MODE_SHIFT)
+#define ECR_MODE_CFG (07U << ECR_MODE_SHIFT)
+#define ECR_nERRINTR (1U << 4)
+#define ECR_DMAEN (1U << 3)
+#define ECR_SERVINTR (1U << 2)
+#define ECR_F_FULL (1U << 1)
+#define ECR_F_EMPTY (1U << 0)
+
+/*--- Private data -----------------------------------------------------*/
+
+/**
+ * enum parport_ip32_irq_mode - operation mode of interrupt handler
+ * @PARPORT_IP32_IRQ_FWD: forward interrupt to the upper parport layer
+ * @PARPORT_IP32_IRQ_HERE: interrupt is handled locally
+ */
+enum parport_ip32_irq_mode { PARPORT_IP32_IRQ_FWD, PARPORT_IP32_IRQ_HERE };
+
+/**
+ * struct parport_ip32_private - private stuff for &struct parport
+ * @regs: register addresses
+ * @dcr_cache: cached contents of DCR
+ * @dcr_writable: bit mask of writable DCR bits
+ * @pword: number of bytes per PWord
+ * @fifo_depth: number of PWords that FIFO will hold
+ * @readIntrThreshold: minimum number of PWords we can read
+ * if we get an interrupt
+ * @writeIntrThreshold: minimum number of PWords we can write
+ * if we get an interrupt
+ * @irq_mode: operation mode of interrupt handler for this port
+ * @irq_complete: mutex used to wait for an interrupt to occur
+ */
+struct parport_ip32_private {
+ struct parport_ip32_regs regs;
+ unsigned int dcr_cache;
+ unsigned int dcr_writable;
+ unsigned int pword;
+ unsigned int fifo_depth;
+ unsigned int readIntrThreshold;
+ unsigned int writeIntrThreshold;
+ enum parport_ip32_irq_mode irq_mode;
+ struct completion irq_complete;
+};
+
+/*--- Debug code -------------------------------------------------------*/
+
+/*
+ * pr_debug1 - print debug messages
+ *
+ * This is like pr_debug(), but is defined for %DEBUG_PARPORT_IP32 >= 1
+ */
+#if DEBUG_PARPORT_IP32 >= 1
+# define pr_debug1(...) printk(KERN_DEBUG __VA_ARGS__)
+#else /* DEBUG_PARPORT_IP32 < 1 */
+# define pr_debug1(...) do { } while (0)
+#endif
+
+/*
+ * pr_trace, pr_trace1 - trace function calls
+ * @p: pointer to &struct parport
+ * @fmt: printk format string
+ * @...: parameters for format string
+ *
+ * Macros used to trace function calls. The given string is formatted after
+ * function name. pr_trace() uses pr_debug(), and pr_trace1() uses
+ * pr_debug1(). __pr_trace() is the low-level macro and is not to be used
+ * directly.
+ */
+#define __pr_trace(pr, p, fmt, ...) \
+ pr("%s: %s" fmt "\n", \
+ ({ const struct parport *__p = (p); \
+ __p ? __p->name : "parport_ip32"; }), \
+ __func__ , ##__VA_ARGS__)
+#define pr_trace(p, fmt, ...) __pr_trace(pr_debug, p, fmt , ##__VA_ARGS__)
+#define pr_trace1(p, fmt, ...) __pr_trace(pr_debug1, p, fmt , ##__VA_ARGS__)
+
+/*
+ * __pr_probe, pr_probe - print message if @verbose_probing is true
+ * @p: pointer to &struct parport
+ * @fmt: printk format string
+ * @...: parameters for format string
+ *
+ * For new lines, use pr_probe(). Use __pr_probe() for continued lines.
+ */
+#define __pr_probe(...) \
+ do { if (verbose_probing) printk(__VA_ARGS__); } while (0)
+#define pr_probe(p, fmt, ...) \
+ __pr_probe(KERN_INFO PPIP32 "0x%lx: " fmt, (p)->base , ##__VA_ARGS__)
+
+/*
+ * parport_ip32_dump_state - print register status of parport
+ * @p: pointer to &struct parport
+ * @str: string to add in message
+ * @show_ecp_config: shall we dump ECP configuration registers too?
+ *
+ * This function is only here for debugging purpose, and should be used with
+ * care. Reading the parallel port registers may have undesired side effects.
+ * Especially if @show_ecp_config is true, the parallel port is resetted.
+ * This function is only defined if %DEBUG_PARPORT_IP32 >= 2.
+ */
+#if DEBUG_PARPORT_IP32 >= 2
+static void parport_ip32_dump_state(struct parport *p, char *str,
+ unsigned int show_ecp_config)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ unsigned int i;
+
+ printk(KERN_DEBUG PPIP32 "%s: state (%s):\n", p->name, str);
+ {
+ static const char ecr_modes[8][4] = {"SPP", "PS2", "PPF",
+ "ECP", "EPP", "???",
+ "TST", "CFG"};
+ unsigned int ecr = readb(priv->regs.ecr);
+ printk(KERN_DEBUG PPIP32 " ecr=0x%02x", ecr);
+ printk(" %s",
+ ecr_modes[(ecr & ECR_MODE_MASK) >> ECR_MODE_SHIFT]);
+ if (ecr & ECR_nERRINTR)
+ printk(",nErrIntrEn");
+ if (ecr & ECR_DMAEN)
+ printk(",dmaEn");
+ if (ecr & ECR_SERVINTR)
+ printk(",serviceIntr");
+ if (ecr & ECR_F_FULL)
+ printk(",f_full");
+ if (ecr & ECR_F_EMPTY)
+ printk(",f_empty");
+ printk("\n");
+ }
+ if (show_ecp_config) {
+ unsigned int oecr, cnfgA, cnfgB;
+ oecr = readb(priv->regs.ecr);
+ writeb(ECR_MODE_PS2, priv->regs.ecr);
+ writeb(ECR_MODE_CFG, priv->regs.ecr);
+ cnfgA = readb(priv->regs.cnfgA);
+ cnfgB = readb(priv->regs.cnfgB);
+ writeb(ECR_MODE_PS2, priv->regs.ecr);
+ writeb(oecr, priv->regs.ecr);
+ printk(KERN_DEBUG PPIP32 " cnfgA=0x%02x", cnfgA);
+ printk(" ISA-%s", (cnfgA & CNFGA_IRQ) ? "Level" : "Pulses");
+ switch (cnfgA & CNFGA_ID_MASK) {
+ case CNFGA_ID_8:
+ printk(",8 bits");
+ break;
+ case CNFGA_ID_16:
+ printk(",16 bits");
+ break;
+ case CNFGA_ID_32:
+ printk(",32 bits");
+ break;
+ default:
+ printk(",unknown ID");
+ break;
+ }
+ if (!(cnfgA & CNFGA_nBYTEINTRANS))
+ printk(",ByteInTrans");
+ if ((cnfgA & CNFGA_ID_MASK) != CNFGA_ID_8)
+ printk(",%d byte%s left", cnfgA & CNFGA_PWORDLEFT,
+ ((cnfgA & CNFGA_PWORDLEFT) > 1) ? "s" : "");
+ printk("\n");
+ printk(KERN_DEBUG PPIP32 " cnfgB=0x%02x", cnfgB);
+ printk(" irq=%u,dma=%u",
+ (cnfgB & CNFGB_IRQ_MASK) >> CNFGB_IRQ_SHIFT,
+ (cnfgB & CNFGB_DMA_MASK) >> CNFGB_DMA_SHIFT);
+ printk(",intrValue=%d", !!(cnfgB & CNFGB_INTRVAL));
+ if (cnfgB & CNFGB_COMPRESS)
+ printk(",compress");
+ printk("\n");
+ }
+ for (i = 0; i < 2; i++) {
+ unsigned int dcr = i ? priv->dcr_cache : readb(priv->regs.dcr);
+ printk(KERN_DEBUG PPIP32 " dcr(%s)=0x%02x",
+ i ? "soft" : "hard", dcr);
+ printk(" %s", (dcr & DCR_DIR) ? "rev" : "fwd");
+ if (dcr & DCR_IRQ)
+ printk(",ackIntEn");
+ if (!(dcr & DCR_SELECT))
+ printk(",nSelectIn");
+ if (dcr & DCR_nINIT)
+ printk(",nInit");
+ if (!(dcr & DCR_AUTOFD))
+ printk(",nAutoFD");
+ if (!(dcr & DCR_STROBE))
+ printk(",nStrobe");
+ printk("\n");
+ }
+#define sep (f++ ? ',' : ' ')
+ {
+ unsigned int f = 0;
+ unsigned int dsr = readb(priv->regs.dsr);
+ printk(KERN_DEBUG PPIP32 " dsr=0x%02x", dsr);
+ if (!(dsr & DSR_nBUSY))
+ printk("%cBusy", sep);
+ if (dsr & DSR_nACK)
+ printk("%cnAck", sep);
+ if (dsr & DSR_PERROR)
+ printk("%cPError", sep);
+ if (dsr & DSR_SELECT)
+ printk("%cSelect", sep);
+ if (dsr & DSR_nFAULT)
+ printk("%cnFault", sep);
+ if (!(dsr & DSR_nPRINT))
+ printk("%c(Print)", sep);
+ if (dsr & DSR_TIMEOUT)
+ printk("%cTimeout", sep);
+ printk("\n");
+ }
+#undef sep
+}
+#else /* DEBUG_PARPORT_IP32 < 2 */
+#define parport_ip32_dump_state(...) do { } while (0)
+#endif
+
+/*
+ * CHECK_EXTRA_BITS - track and log extra bits
+ * @p: pointer to &struct parport
+ * @b: byte to inspect
+ * @m: bit mask of authorized bits
+ *
+ * This is used to track and log extra bits that should not be there in
+ * parport_ip32_write_control() and parport_ip32_frob_control(). It is only
+ * defined if %DEBUG_PARPORT_IP32 >= 1.
+ */
+#if DEBUG_PARPORT_IP32 >= 1
+#define CHECK_EXTRA_BITS(p, b, m) \
+ do { \
+ unsigned int __b = (b), __m = (m); \
+ if (__b & ~__m) \
+ pr_debug1(PPIP32 "%s: extra bits in %s(%s): " \
+ "0x%02x/0x%02x\n", \
+ (p)->name, __func__, #b, __b, __m); \
+ } while (0)
+#else /* DEBUG_PARPORT_IP32 < 1 */
+#define CHECK_EXTRA_BITS(...) do { } while (0)
+#endif
+
+/*--- IP32 parallel port DMA operations --------------------------------*/
+
+/**
+ * struct parport_ip32_dma_data - private data needed for DMA operation
+ * @dir: DMA direction (from or to device)
+ * @buf: buffer physical address
+ * @len: buffer length
+ * @next: address of next bytes to DMA transfer
+ * @left: number of bytes remaining
+ * @ctx: next context to write (0: context_a; 1: context_b)
+ * @irq_on: are the DMA IRQs currently enabled?
+ * @lock: spinlock to protect access to the structure
+ */
+struct parport_ip32_dma_data {
+ enum dma_data_direction dir;
+ dma_addr_t buf;
+ dma_addr_t next;
+ size_t len;
+ size_t left;
+ unsigned int ctx;
+ unsigned int irq_on;
+ spinlock_t lock;
+};
+static struct parport_ip32_dma_data parport_ip32_dma;
+
+/**
+ * parport_ip32_dma_setup_context - setup next DMA context
+ * @limit: maximum data size for the context
+ *
+ * The alignment constraints must be verified in caller function, and the
+ * parameter @limit must be set accordingly.
+ */
+static void parport_ip32_dma_setup_context(unsigned int limit)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&parport_ip32_dma.lock, flags);
+ if (parport_ip32_dma.left > 0) {
+ /* Note: ctxreg is "volatile" here only because
+ * mace->perif.ctrl.parport.context_a and context_b are
+ * "volatile". */
+ volatile u64 __iomem *ctxreg = (parport_ip32_dma.ctx == 0) ?
+ &mace->perif.ctrl.parport.context_a :
+ &mace->perif.ctrl.parport.context_b;
+ u64 count;
+ u64 ctxval;
+ if (parport_ip32_dma.left <= limit) {
+ count = parport_ip32_dma.left;
+ ctxval = MACEPAR_CONTEXT_LASTFLAG;
+ } else {
+ count = limit;
+ ctxval = 0;
+ }
+
+ pr_trace(NULL,
+ "(%u): 0x%04x:0x%04x, %u -> %u%s",
+ limit,
+ (unsigned int)parport_ip32_dma.buf,
+ (unsigned int)parport_ip32_dma.next,
+ (unsigned int)count,
+ parport_ip32_dma.ctx, ctxval ? "*" : "");
+
+ ctxval |= parport_ip32_dma.next &
+ MACEPAR_CONTEXT_BASEADDR_MASK;
+ ctxval |= ((count - 1) << MACEPAR_CONTEXT_DATALEN_SHIFT) &
+ MACEPAR_CONTEXT_DATALEN_MASK;
+ writeq(ctxval, ctxreg);
+ parport_ip32_dma.next += count;
+ parport_ip32_dma.left -= count;
+ parport_ip32_dma.ctx ^= 1U;
+ }
+ /* If there is nothing more to send, disable IRQs to avoid to
+ * face an IRQ storm which can lock the machine. Disable them
+ * only once. */
+ if (parport_ip32_dma.left == 0 && parport_ip32_dma.irq_on) {
+ pr_debug(PPIP32 "IRQ off (ctx)\n");
+ disable_irq_nosync(MACEISA_PAR_CTXA_IRQ);
+ disable_irq_nosync(MACEISA_PAR_CTXB_IRQ);
+ parport_ip32_dma.irq_on = 0;
+ }
+ spin_unlock_irqrestore(&parport_ip32_dma.lock, flags);
+}
+
+/**
+ * parport_ip32_dma_interrupt - DMA interrupt handler
+ * @irq: interrupt number
+ * @dev_id: unused
+ * @regs: pointer to &struct pt_regs
+ */
+static irqreturn_t parport_ip32_dma_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ if (parport_ip32_dma.left)
+ pr_trace(NULL, "(%d): ctx=%d", irq, parport_ip32_dma.ctx);
+ parport_ip32_dma_setup_context(MACEPAR_CONTEXT_DATA_BOUND);
+ return IRQ_HANDLED;
+}
+
+#if DEBUG_PARPORT_IP32
+static irqreturn_t parport_ip32_merr_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ pr_trace1(NULL, "(%d)", irq);
+ return IRQ_HANDLED;
+}
+#endif
+
+/**
+ * parport_ip32_dma_start - begins a DMA transfer
+ * @dir: DMA direction: DMA_TO_DEVICE or DMA_FROM_DEVICE
+ * @addr: pointer to data buffer
+ * @count: buffer size
+ *
+ * Calls to parport_ip32_dma_start() and parport_ip32_dma_stop() must be
+ * correctly balanced.
+ */
+static int parport_ip32_dma_start(enum dma_data_direction dir,
+ void *addr, size_t count)
+{
+ unsigned int limit;
+ u64 ctrl;
+
+ pr_trace(NULL, "(%d, %lu)", dir, (unsigned long)count);
+
+ /* FIXME - add support for DMA_FROM_DEVICE. In this case, buffer must
+ * be 64 bytes aligned. */
+ BUG_ON(dir != DMA_TO_DEVICE);
+
+ /* Reset DMA controller */
+ ctrl = MACEPAR_CTLSTAT_RESET;
+ writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+
+ /* DMA IRQs should normally be enabled */
+ if (!parport_ip32_dma.irq_on) {
+ WARN_ON(1);
+ enable_irq(MACEISA_PAR_CTXA_IRQ);
+ enable_irq(MACEISA_PAR_CTXB_IRQ);
+ parport_ip32_dma.irq_on = 1;
+ }
+
+ /* Prepare DMA pointers */
+ parport_ip32_dma.dir = dir;
+ parport_ip32_dma.buf = dma_map_single(NULL, addr, count, dir);
+ parport_ip32_dma.len = count;
+ parport_ip32_dma.next = parport_ip32_dma.buf;
+ parport_ip32_dma.left = parport_ip32_dma.len;
+ parport_ip32_dma.ctx = 0;
+
+ /* Setup DMA direction and first two contexts */
+ ctrl = (dir == DMA_TO_DEVICE) ? 0 : MACEPAR_CTLSTAT_DIRECTION;
+ writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+ /* Single transfer should not cross a 4K page boundary */
+ limit = MACEPAR_CONTEXT_DATA_BOUND -
+ (parport_ip32_dma.next & (MACEPAR_CONTEXT_DATA_BOUND - 1));
+ parport_ip32_dma_setup_context(limit);
+ parport_ip32_dma_setup_context(MACEPAR_CONTEXT_DATA_BOUND);
+
+ /* Real start of DMA transfer */
+ ctrl |= MACEPAR_CTLSTAT_ENABLE;
+ writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+
+ return 0;
+}
+
+/**
+ * parport_ip32_dma_stop - ends a running DMA transfer
+ *
+ * Calls to parport_ip32_dma_start() and parport_ip32_dma_stop() must be
+ * correctly balanced.
+ */
+static void parport_ip32_dma_stop(void)
+{
+ u64 ctx_a;
+ u64 ctx_b;
+ u64 ctrl;
+ u64 diag;
+ size_t res[2]; /* {[0] = res_a, [1] = res_b} */
+
+ pr_trace(NULL, "()");
+
+ /* Disable IRQs */
+ spin_lock_irq(&parport_ip32_dma.lock);
+ if (parport_ip32_dma.irq_on) {
+ pr_debug(PPIP32 "IRQ off (stop)\n");
+ disable_irq_nosync(MACEISA_PAR_CTXA_IRQ);
+ disable_irq_nosync(MACEISA_PAR_CTXB_IRQ);
+ parport_ip32_dma.irq_on = 0;
+ }
+ spin_unlock_irq(&parport_ip32_dma.lock);
+ /* Force IRQ synchronization, even if the IRQs were disabled
+ * elsewhere. */
+ synchronize_irq(MACEISA_PAR_CTXA_IRQ);
+ synchronize_irq(MACEISA_PAR_CTXB_IRQ);
+
+ /* Stop DMA transfer */
+ ctrl = readq(&mace->perif.ctrl.parport.cntlstat);
+ ctrl &= ~MACEPAR_CTLSTAT_ENABLE;
+ writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+
+ /* Adjust residue (parport_ip32_dma.left) */
+ ctx_a = readq(&mace->perif.ctrl.parport.context_a);
+ ctx_b = readq(&mace->perif.ctrl.parport.context_b);
+ ctrl = readq(&mace->perif.ctrl.parport.cntlstat);
+ diag = readq(&mace->perif.ctrl.parport.diagnostic);
+ res[0] = (ctrl & MACEPAR_CTLSTAT_CTXA_VALID) ?
+ 1 + ((ctx_a & MACEPAR_CONTEXT_DATALEN_MASK) >>
+ MACEPAR_CONTEXT_DATALEN_SHIFT) :
+ 0;
+ res[1] = (ctrl & MACEPAR_CTLSTAT_CTXB_VALID) ?
+ 1 + ((ctx_b & MACEPAR_CONTEXT_DATALEN_MASK) >>
+ MACEPAR_CONTEXT_DATALEN_SHIFT) :
+ 0;
+ if (diag & MACEPAR_DIAG_DMACTIVE)
+ res[(diag & MACEPAR_DIAG_CTXINUSE) != 0] =
+ 1 + ((diag & MACEPAR_DIAG_CTRMASK) >>
+ MACEPAR_DIAG_CTRSHIFT);
+ parport_ip32_dma.left += res[0] + res[1];
+
+ /* Reset DMA controller, and re-enable IRQs */
+ ctrl = MACEPAR_CTLSTAT_RESET;
+ writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+ pr_debug(PPIP32 "IRQ on (stop)\n");
+ enable_irq(MACEISA_PAR_CTXA_IRQ);
+ enable_irq(MACEISA_PAR_CTXB_IRQ);
+ parport_ip32_dma.irq_on = 1;
+
+ dma_unmap_single(NULL, parport_ip32_dma.buf, parport_ip32_dma.len,
+ parport_ip32_dma.dir);
+}
+
+/**
+ * parport_ip32_dma_get_residue - get residue from last DMA transfer
+ *
+ * Returns the number of bytes remaining from last DMA transfer.
+ */
+static inline size_t parport_ip32_dma_get_residue(void)
+{
+ return parport_ip32_dma.left;
+}
+
+/**
+ * parport_ip32_dma_register - initialize DMA engine
+ *
+ * Returns zero for success.
+ */
+static int parport_ip32_dma_register(void)
+{
+ int err;
+
+ spin_lock_init(&parport_ip32_dma.lock);
+ parport_ip32_dma.irq_on = 1;
+
+ /* Reset DMA controller */
+ writeq(MACEPAR_CTLSTAT_RESET, &mace->perif.ctrl.parport.cntlstat);
+
+ /* Request IRQs */
+ err = request_irq(MACEISA_PAR_CTXA_IRQ, parport_ip32_dma_interrupt,
+ 0, "parport_ip32", NULL);
+ if (err)
+ goto fail_a;
+ err = request_irq(MACEISA_PAR_CTXB_IRQ, parport_ip32_dma_interrupt,
+ 0, "parport_ip32", NULL);
+ if (err)
+ goto fail_b;
+#if DEBUG_PARPORT_IP32
+ /* FIXME - what is this IRQ for? */
+ err = request_irq(MACEISA_PAR_MERR_IRQ, parport_ip32_merr_interrupt,
+ 0, "parport_ip32", NULL);
+ if (err)
+ goto fail_merr;
+#endif
+ return 0;
+
+#if DEBUG_PARPORT_IP32
+fail_merr:
+ free_irq(MACEISA_PAR_CTXB_IRQ, NULL);
+#endif
+fail_b:
+ free_irq(MACEISA_PAR_CTXA_IRQ, NULL);
+fail_a:
+ return err;
+}
+
+/**
+ * parport_ip32_dma_unregister - release and free resources for DMA engine
+ */
+static void parport_ip32_dma_unregister(void)
+{
+#if DEBUG_PARPORT_IP32
+ free_irq(MACEISA_PAR_MERR_IRQ, NULL);
+#endif
+ free_irq(MACEISA_PAR_CTXB_IRQ, NULL);
+ free_irq(MACEISA_PAR_CTXA_IRQ, NULL);
+}
+
+/*--- Interrupt handlers and associates --------------------------------*/
+
+/**
+ * parport_ip32_wakeup - wakes up code waiting for an interrupt
+ * @p: pointer to &struct parport
+ */
+static inline void parport_ip32_wakeup(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ complete(&priv->irq_complete);
+}
+
+/**
+ * parport_ip32_interrupt - interrupt handler
+ * @irq: interrupt number
+ * @dev_id: pointer to &struct parport
+ * @regs: pointer to &struct pt_regs
+ *
+ * Caught interrupts are forwarded to the upper parport layer if IRQ_mode is
+ * %PARPORT_IP32_IRQ_FWD.
+ */
+static irqreturn_t parport_ip32_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ struct parport * const p = dev_id;
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ enum parport_ip32_irq_mode irq_mode = priv->irq_mode;
+ switch (irq_mode) {
+ case PARPORT_IP32_IRQ_FWD:
+ parport_generic_irq(irq, p, regs);
+ break;
+ case PARPORT_IP32_IRQ_HERE:
+ parport_ip32_wakeup(p);
+ break;
+ }
+ return IRQ_HANDLED;
+}
+
+/*--- Some utility function to manipulate ECR register -----------------*/
+
+/**
+ * parport_ip32_read_econtrol - read contents of the ECR register
+ * @p: pointer to &struct parport
+ */
+static inline unsigned int parport_ip32_read_econtrol(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return readb(priv->regs.ecr);
+}
+
+/**
+ * parport_ip32_write_econtrol - write new contents to the ECR register
+ * @p: pointer to &struct parport
+ * @c: new value to write
+ */
+static inline void parport_ip32_write_econtrol(struct parport *p,
+ unsigned int c)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ writeb(c, priv->regs.ecr);
+}
+
+/**
+ * parport_ip32_frob_econtrol - change bits from the ECR register
+ * @p: pointer to &struct parport
+ * @mask: bit mask of bits to change
+ * @val: new value for changed bits
+ *
+ * Read from the ECR, mask out the bits in @mask, exclusive-or with the bits
+ * in @val, and write the result to the ECR.
+ */
+static inline void parport_ip32_frob_econtrol(struct parport *p,
+ unsigned int mask,
+ unsigned int val)
+{
+ unsigned int c;
+ c = (parport_ip32_read_econtrol(p) & ~mask) ^ val;
+ parport_ip32_write_econtrol(p, c);
+}
+
+/**
+ * parport_ip32_set_mode - change mode of ECP port
+ * @p: pointer to &struct parport
+ * @mode: new mode to write in ECR
+ *
+ * ECR is reset in a sane state (interrupts and DMA disabled), and placed in
+ * mode @mode. Go through PS2 mode if needed.
+ */
+static void parport_ip32_set_mode(struct parport *p, unsigned int mode)
+{
+ unsigned int omode;
+
+ mode &= ECR_MODE_MASK;
+ omode = parport_ip32_read_econtrol(p) & ECR_MODE_MASK;
+
+ if (!(mode == ECR_MODE_SPP || mode == ECR_MODE_PS2
+ || omode == ECR_MODE_SPP || omode == ECR_MODE_PS2)) {
+ /* We have to go through PS2 mode */
+ unsigned int ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
+ parport_ip32_write_econtrol(p, ecr);
+ }
+ parport_ip32_write_econtrol(p, mode | ECR_nERRINTR | ECR_SERVINTR);
+}
+
+/*--- Basic functions needed for parport -------------------------------*/
+
+/**
+ * parport_ip32_read_data - return current contents of the DATA register
+ * @p: pointer to &struct parport
+ */
+static inline unsigned char parport_ip32_read_data(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return readb(priv->regs.data);
+}
+
+/**
+ * parport_ip32_write_data - set new contents for the DATA register
+ * @p: pointer to &struct parport
+ * @d: new value to write
+ */
+static inline void parport_ip32_write_data(struct parport *p, unsigned char d)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ writeb(d, priv->regs.data);
+}
+
+/**
+ * parport_ip32_read_status - return current contents of the DSR register
+ * @p: pointer to &struct parport
+ */
+static inline unsigned char parport_ip32_read_status(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return readb(priv->regs.dsr);
+}
+
+/**
+ * __parport_ip32_read_control - return cached contents of the DCR register
+ * @p: pointer to &struct parport
+ */
+static inline unsigned int __parport_ip32_read_control(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return priv->dcr_cache; /* use soft copy */
+}
+
+/**
+ * __parport_ip32_write_control - set new contents for the DCR register
+ * @p: pointer to &struct parport
+ * @c: new value to write
+ */
+static inline void __parport_ip32_write_control(struct parport *p,
+ unsigned int c)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ CHECK_EXTRA_BITS(p, c, priv->dcr_writable);
+ c &= priv->dcr_writable; /* only writable bits */
+ writeb(c, priv->regs.dcr);
+ priv->dcr_cache = c; /* update soft copy */
+}
+
+/**
+ * __parport_ip32_frob_control - change bits from the DCR register
+ * @p: pointer to &struct parport
+ * @mask: bit mask of bits to change
+ * @val: new value for changed bits
+ *
+ * This is equivalent to read from the DCR, mask out the bits in @mask,
+ * exclusive-or with the bits in @val, and write the result to the DCR.
+ * Actually, the cached contents of the DCR is used.
+ */
+static inline void __parport_ip32_frob_control(struct parport *p,
+ unsigned int mask,
+ unsigned int val)
+{
+ unsigned int c;
+ c = (__parport_ip32_read_control(p) & ~mask) ^ val;
+ __parport_ip32_write_control(p, c);
+}
+
+/**
+ * parport_ip32_read_control - return cached contents of the DCR register
+ * @p: pointer to &struct parport
+ *
+ * The return value is masked so as to only return the value of %DCR_STROBE,
+ * %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
+ */
+static inline unsigned char parport_ip32_read_control(struct parport *p)
+{
+ const unsigned int rm =
+ DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
+ return __parport_ip32_read_control(p) & rm;
+}
+
+/**
+ * parport_ip32_write_control - set new contents for the DCR register
+ * @p: pointer to &struct parport
+ * @c: new value to write
+ *
+ * The value is masked so as to only change the value of %DCR_STROBE,
+ * %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
+ */
+static inline void parport_ip32_write_control(struct parport *p,
+ unsigned char c)
+{
+ const unsigned int wm =
+ DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
+ CHECK_EXTRA_BITS(p, c, wm);
+ __parport_ip32_frob_control(p, wm, c & wm);
+}
+
+/**
+ * parport_ip32_frob_control - change bits from the DCR register
+ * @p: pointer to &struct parport
+ * @mask: bit mask of bits to change
+ * @val: new value for changed bits
+ *
+ * This differs from __parport_ip32_frob_control() in that it only allows to
+ * change the value of %DCR_STROBE, %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
+ */
+static inline unsigned char parport_ip32_frob_control(struct parport *p,
+ unsigned char mask,
+ unsigned char val)
+{
+ const unsigned int wm =
+ DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
+ CHECK_EXTRA_BITS(p, mask, wm);
+ CHECK_EXTRA_BITS(p, val, wm);
+ __parport_ip32_frob_control(p, mask & wm, val & wm);
+ return parport_ip32_read_control(p);
+}
+
+/**
+ * parport_ip32_disable_irq - disable interrupts on the rising edge of nACK
+ * @p: pointer to &struct parport
+ */
+static inline void parport_ip32_disable_irq(struct parport *p)
+{
+ __parport_ip32_frob_control(p, DCR_IRQ, 0);
+}
+
+/**
+ * parport_ip32_enable_irq - enable interrupts on the rising edge of nACK
+ * @p: pointer to &struct parport
+ */
+static inline void parport_ip32_enable_irq(struct parport *p)
+{
+ __parport_ip32_frob_control(p, DCR_IRQ, DCR_IRQ);
+}
+
+/**
+ * parport_ip32_data_forward - enable host-to-peripheral communications
+ * @p: pointer to &struct parport
+ *
+ * Enable the data line drivers, for 8-bit host-to-peripheral communications.
+ */
+static inline void parport_ip32_data_forward(struct parport *p)
+{
+ __parport_ip32_frob_control(p, DCR_DIR, 0);
+}
+
+/**
+ * parport_ip32_data_reverse - enable peripheral-to-host communications
+ * @p: pointer to &struct parport
+ *
+ * Place the data bus in a high impedance state, if @p->modes has the
+ * PARPORT_MODE_TRISTATE bit set.
+ */
+static inline void parport_ip32_data_reverse(struct parport *p)
+{
+ __parport_ip32_frob_control(p, DCR_DIR, DCR_DIR);
+}
+
+/**
+ * parport_ip32_init_state - for core parport code
+ * @dev: pointer to &struct pardevice
+ * @s: pointer to &struct parport_state to initialize
+ */
+static void parport_ip32_init_state(struct pardevice *dev,
+ struct parport_state *s)
+{
+ s->u.ip32.dcr = DCR_SELECT | DCR_nINIT;
+ s->u.ip32.ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
+}
+
+/**
+ * parport_ip32_save_state - for core parport code
+ * @p: pointer to &struct parport
+ * @s: pointer to &struct parport_state to save state to
+ */
+static void parport_ip32_save_state(struct parport *p,
+ struct parport_state *s)
+{
+ s->u.ip32.dcr = __parport_ip32_read_control(p);
+ s->u.ip32.ecr = parport_ip32_read_econtrol(p);
+}
+
+/**
+ * parport_ip32_restore_state - for core parport code
+ * @p: pointer to &struct parport
+ * @s: pointer to &struct parport_state to restore state from
+ */
+static void parport_ip32_restore_state(struct parport *p,
+ struct parport_state *s)
+{
+ parport_ip32_set_mode(p, s->u.ip32.ecr & ECR_MODE_MASK);
+ parport_ip32_write_econtrol(p, s->u.ip32.ecr);
+ __parport_ip32_write_control(p, s->u.ip32.dcr);
+}
+
+/*--- EPP mode functions -----------------------------------------------*/
+
+/**
+ * parport_ip32_clear_epp_timeout - clear Timeout bit in EPP mode
+ * @p: pointer to &struct parport
+ *
+ * Returns 1 if the Timeout bit is clear, and 0 otherwise.
+ */
+static unsigned int parport_ip32_clear_epp_timeout(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ unsigned int cleared;
+
+ if (!(parport_ip32_read_status(p) & DSR_TIMEOUT))
+ cleared = 1;
+ else {
+ unsigned int r;
+ /* To clear timeout some chips require double read */
+ parport_ip32_read_status(p);
+ r = parport_ip32_read_status(p);
+ /* Some reset by writing 1 */
+ writeb(r | DSR_TIMEOUT, priv->regs.dsr);
+ /* Others by writing 0 */
+ writeb(r & ~DSR_TIMEOUT, priv->regs.dsr);
+
+ r = parport_ip32_read_status(p);
+ cleared = !(r & DSR_TIMEOUT);
+ }
+
+ pr_trace(p, "(): %s", cleared ? "cleared" : "failed");
+ return cleared;
+}
+
+/**
+ * parport_ip32_epp_read - generic EPP read function
+ * @eppreg: I/O register to read from
+ * @p: pointer to &struct parport
+ * @buf: buffer to store read data
+ * @len: length of buffer @buf
+ * @flags: may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_read(void __iomem *eppreg,
+ struct parport *p, void *buf,
+ size_t len, int flags)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ size_t got;
+ parport_ip32_set_mode(p, ECR_MODE_EPP);
+ parport_ip32_data_reverse(p);
+ parport_ip32_write_control(p, DCR_nINIT);
+ if ((flags & PARPORT_EPP_FAST) && (len > 1)) {
+ readsb(eppreg, buf, len);
+ if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+ parport_ip32_clear_epp_timeout(p);
+ return -EIO;
+ }
+ got = len;
+ } else {
+ u8 *bufp = buf;
+ for (got = 0; got < len; got++) {
+ *bufp++ = readb(eppreg);
+ if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+ parport_ip32_clear_epp_timeout(p);
+ break;
+ }
+ }
+ }
+ parport_ip32_data_forward(p);
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ return got;
+}
+
+/**
+ * parport_ip32_epp_write - generic EPP write function
+ * @eppreg: I/O register to write to
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ * @flags: may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_write(void __iomem *eppreg,
+ struct parport *p, const void *buf,
+ size_t len, int flags)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ size_t written;
+ parport_ip32_set_mode(p, ECR_MODE_EPP);
+ parport_ip32_data_forward(p);
+ parport_ip32_write_control(p, DCR_nINIT);
+ if ((flags & PARPORT_EPP_FAST) && (len > 1)) {
+ writesb(eppreg, buf, len);
+ if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+ parport_ip32_clear_epp_timeout(p);
+ return -EIO;
+ }
+ written = len;
+ } else {
+ const u8 *bufp = buf;
+ for (written = 0; written < len; written++) {
+ writeb(*bufp++, eppreg);
+ if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+ parport_ip32_clear_epp_timeout(p);
+ break;
+ }
+ }
+ }
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ return written;
+}
+
+/**
+ * parport_ip32_epp_read_data - read a block of data in EPP mode
+ * @p: pointer to &struct parport
+ * @buf: buffer to store read data
+ * @len: length of buffer @buf
+ * @flags: may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_read_data(struct parport *p, void *buf,
+ size_t len, int flags)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return parport_ip32_epp_read(priv->regs.eppData0, p, buf, len, flags);
+}
+
+/**
+ * parport_ip32_epp_write_data - write a block of data in EPP mode
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ * @flags: may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_write_data(struct parport *p, const void *buf,
+ size_t len, int flags)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return parport_ip32_epp_write(priv->regs.eppData0, p, buf, len, flags);
+}
+
+/**
+ * parport_ip32_epp_read_addr - read a block of addresses in EPP mode
+ * @p: pointer to &struct parport
+ * @buf: buffer to store read data
+ * @len: length of buffer @buf
+ * @flags: may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_read_addr(struct parport *p, void *buf,
+ size_t len, int flags)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return parport_ip32_epp_read(priv->regs.eppAddr, p, buf, len, flags);
+}
+
+/**
+ * parport_ip32_epp_write_addr - write a block of addresses in EPP mode
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ * @flags: may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_write_addr(struct parport *p, const void *buf,
+ size_t len, int flags)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return parport_ip32_epp_write(priv->regs.eppAddr, p, buf, len, flags);
+}
+
+/*--- ECP mode functions (FIFO) ----------------------------------------*/
+
+/**
+ * parport_ip32_fifo_wait_break - check if the waiting function should return
+ * @p: pointer to &struct parport
+ * @expire: timeout expiring date, in jiffies
+ *
+ * parport_ip32_fifo_wait_break() checks if the waiting function should return
+ * immediately or not. The break conditions are:
+ * - expired timeout;
+ * - a pending signal;
+ * - nFault asserted low.
+ * This function also calls cond_resched().
+ */
+static unsigned int parport_ip32_fifo_wait_break(struct parport *p,
+ unsigned long expire)
+{
+ cond_resched();
+ if (time_after(jiffies, expire)) {
+ pr_debug1(PPIP32 "%s: FIFO write timed out\n", p->name);
+ return 1;
+ }
+ if (signal_pending(current)) {
+ pr_debug1(PPIP32 "%s: Signal pending\n", p->name);
+ return 1;
+ }
+ if (!(parport_ip32_read_status(p) & DSR_nFAULT)) {
+ pr_debug1(PPIP32 "%s: nFault asserted low\n", p->name);
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * parport_ip32_fwp_wait_polling - wait for FIFO to empty (polling)
+ * @p: pointer to &struct parport
+ *
+ * Returns the number of bytes that can safely be written in the FIFO. A
+ * return value of zero means that the calling function should terminate as
+ * fast as possible.
+ */
+static unsigned int parport_ip32_fwp_wait_polling(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ struct parport * const physport = p->physport;
+ unsigned long expire;
+ unsigned int count;
+ unsigned int ecr;
+
+ expire = jiffies + physport->cad->timeout;
+ count = 0;
+ while (1) {
+ if (parport_ip32_fifo_wait_break(p, expire))
+ break;
+
+ /* Check FIFO state. We do nothing when the FIFO is nor full,
+ * nor empty. It appears that the FIFO full bit is not always
+ * reliable, the FIFO state is sometimes wrongly reported, and
+ * the chip gets confused if we give it another byte. */
+ ecr = parport_ip32_read_econtrol(p);
+ if (ecr & ECR_F_EMPTY) {
+ /* FIFO is empty, fill it up */
+ count = priv->fifo_depth;
+ break;
+ }
+
+ /* Wait a moment... */
+ udelay(FIFO_POLLING_INTERVAL);
+ } /* while (1) */
+
+ return count;
+}
+
+/**
+ * parport_ip32_fwp_wait_interrupt - wait for FIFO to empty (interrupt-driven)
+ * @p: pointer to &struct parport
+ *
+ * Returns the number of bytes that can safely be written in the FIFO. A
+ * return value of zero means that the calling function should terminate as
+ * fast as possible.
+ */
+static unsigned int parport_ip32_fwp_wait_interrupt(struct parport *p)
+{
+ static unsigned int lost_interrupt = 0;
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ struct parport * const physport = p->physport;
+ unsigned long nfault_timeout;
+ unsigned long expire;
+ unsigned int count;
+ unsigned int ecr;
+
+ nfault_timeout = min((unsigned long)physport->cad->timeout,
+ msecs_to_jiffies(FIFO_NFAULT_TIMEOUT));
+ expire = jiffies + physport->cad->timeout;
+ count = 0;
+ while (1) {
+ if (parport_ip32_fifo_wait_break(p, expire))
+ break;
+
+ /* Initialize mutex used to take interrupts into account */
+ INIT_COMPLETION(priv->irq_complete);
+
+ /* Enable serviceIntr */
+ parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);
+
+ /* Enabling serviceIntr while the FIFO is empty does not
+ * always generate an interrupt, so check for emptiness
+ * now. */
+ ecr = parport_ip32_read_econtrol(p);
+ if (!(ecr & ECR_F_EMPTY)) {
+ /* FIFO is not empty: wait for an interrupt or a
+ * timeout to occur */
+ wait_for_completion_interruptible_timeout(
+ &priv->irq_complete, nfault_timeout);
+ ecr = parport_ip32_read_econtrol(p);
+ if ((ecr & ECR_F_EMPTY) && !(ecr & ECR_SERVINTR)
+ && !lost_interrupt) {
+ printk(KERN_WARNING PPIP32
+ "%s: lost interrupt in %s\n",
+ p->name, __func__);
+ lost_interrupt = 1;
+ }
+ }
+
+ /* Disable serviceIntr */
+ parport_ip32_frob_econtrol(p, ECR_SERVINTR, ECR_SERVINTR);
+
+ /* Check FIFO state */
+ if (ecr & ECR_F_EMPTY) {
+ /* FIFO is empty, fill it up */
+ count = priv->fifo_depth;
+ break;
+ } else if (ecr & ECR_SERVINTR) {
+ /* FIFO is not empty, but we know that can safely push
+ * writeIntrThreshold bytes into it */
+ count = priv->writeIntrThreshold;
+ break;
+ }
+ /* FIFO is not empty, and we did not get any interrupt.
+ * Either it's time to check for nFault, or a signal is
+ * pending. This is verified in
+ * parport_ip32_fifo_wait_break(), so we continue the loop. */
+ } /* while (1) */
+
+ return count;
+}
+
+/**
+ * parport_ip32_fifo_write_block_pio - write a block of data (PIO mode)
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ *
+ * Uses PIO to write the contents of the buffer @buf into the parallel port
+ * FIFO. Returns the number of bytes that were actually written. It can work
+ * with or without the help of interrupts. The parallel port must be
+ * correctly initialized before calling parport_ip32_fifo_write_block_pio().
+ */
+static size_t parport_ip32_fifo_write_block_pio(struct parport *p,
+ const void *buf, size_t len)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ const u8 *bufp = buf;
+ size_t left = len;
+
+ priv->irq_mode = PARPORT_IP32_IRQ_HERE;
+
+ while (left > 0) {
+ unsigned int count;
+
+ count = (p->irq == PARPORT_IRQ_NONE) ?
+ parport_ip32_fwp_wait_polling(p) :
+ parport_ip32_fwp_wait_interrupt(p);
+ if (count == 0)
+ break; /* Transmission should be stopped */
+ if (count > left)
+ count = left;
+ if (count == 1) {
+ writeb(*bufp, priv->regs.fifo);
+ bufp++, left--;
+ } else {
+ writesb(priv->regs.fifo, bufp, count);
+ bufp += count, left -= count;
+ }
+ }
+
+ priv->irq_mode = PARPORT_IP32_IRQ_FWD;
+
+ return len - left;
+}
+
+/**
+ * parport_ip32_fifo_write_block_dma - write a block of data (DMA mode)
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ *
+ * Uses DMA to write the contents of the buffer @buf into the parallel port
+ * FIFO. Returns the number of bytes that were actually written. The
+ * parallel port must be correctly initialized before calling
+ * parport_ip32_fifo_write_block_dma().
+ */
+static size_t parport_ip32_fifo_write_block_dma(struct parport *p,
+ const void *buf, size_t len)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ struct parport * const physport = p->physport;
+ unsigned long nfault_timeout;
+ unsigned long expire;
+ size_t written;
+ unsigned int ecr;
+
+ priv->irq_mode = PARPORT_IP32_IRQ_HERE;
+
+ parport_ip32_dma_start(DMA_TO_DEVICE, (void *)buf, len);
+ INIT_COMPLETION(priv->irq_complete);
+ parport_ip32_frob_econtrol(p, ECR_DMAEN | ECR_SERVINTR, ECR_DMAEN);
+
+ nfault_timeout = min((unsigned long)physport->cad->timeout,
+ msecs_to_jiffies(FIFO_NFAULT_TIMEOUT));
+ expire = jiffies + physport->cad->timeout;
+ while (1) {
+ if (parport_ip32_fifo_wait_break(p, expire))
+ break;
+ wait_for_completion_interruptible_timeout(&priv->irq_complete,
+ nfault_timeout);
+ ecr = parport_ip32_read_econtrol(p);
+ if (ecr & ECR_SERVINTR)
+ break; /* DMA transfer just finished */
+ }
+ parport_ip32_dma_stop();
+ written = len - parport_ip32_dma_get_residue();
+
+ priv->irq_mode = PARPORT_IP32_IRQ_FWD;
+
+ return written;
+}
+
+/**
+ * parport_ip32_fifo_write_block - write a block of data
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ *
+ * Uses PIO or DMA to write the contents of the buffer @buf into the parallel
+ * p FIFO. Returns the number of bytes that were actually written.
+ */
+static size_t parport_ip32_fifo_write_block(struct parport *p,
+ const void *buf, size_t len)
+{
+ size_t written = 0;
+ if (len)
+ /* FIXME - Maybe some threshold value should be set for @len
+ * under which we revert to PIO mode? */
+ written = (p->modes & PARPORT_MODE_DMA) ?
+ parport_ip32_fifo_write_block_dma(p, buf, len) :
+ parport_ip32_fifo_write_block_pio(p, buf, len);
+ return written;
+}
+
+/**
+ * parport_ip32_drain_fifo - wait for FIFO to empty
+ * @p: pointer to &struct parport
+ * @timeout: timeout, in jiffies
+ *
+ * This function waits for FIFO to empty. It returns 1 when FIFO is empty, or
+ * 0 if the timeout @timeout is reached before, or if a signal is pending.
+ */
+static unsigned int parport_ip32_drain_fifo(struct parport *p,
+ unsigned long timeout)
+{
+ unsigned long expire = jiffies + timeout;
+ unsigned int polling_interval;
+ unsigned int counter;
+
+ /* Busy wait for approx. 200us */
+ for (counter = 0; counter < 40; counter++) {
+ if (parport_ip32_read_econtrol(p) & ECR_F_EMPTY)
+ break;
+ if (time_after(jiffies, expire))
+ break;
+ if (signal_pending(current))
+ break;
+ udelay(5);
+ }
+ /* Poll slowly. Polling interval starts with 1 millisecond, and is
+ * increased exponentially until 128. */
+ polling_interval = 1; /* msecs */
+ while (!(parport_ip32_read_econtrol(p) & ECR_F_EMPTY)) {
+ if (time_after_eq(jiffies, expire))
+ break;
+ msleep_interruptible(polling_interval);
+ if (signal_pending(current))
+ break;
+ if (polling_interval < 128)
+ polling_interval *= 2;
+ }
+
+ return !!(parport_ip32_read_econtrol(p) & ECR_F_EMPTY);
+}
+
+/**
+ * parport_ip32_get_fifo_residue - reset FIFO
+ * @p: pointer to &struct parport
+ * @mode: current operation mode (ECR_MODE_PPF or ECR_MODE_ECP)
+ *
+ * This function resets FIFO, and returns the number of bytes remaining in it.
+ */
+static unsigned int parport_ip32_get_fifo_residue(struct parport *p,
+ unsigned int mode)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ unsigned int residue;
+ unsigned int cnfga;
+
+ /* FIXME - We are missing one byte if the printer is off-line. I
+ * don't know how to detect this. It looks that the full bit is not
+ * always reliable. For the moment, the problem is avoided in most
+ * cases by testing for BUSY in parport_ip32_compat_write_data().
+ */
+ if (parport_ip32_read_econtrol(p) & ECR_F_EMPTY)
+ residue = 0;
+ else {
+ pr_debug1(PPIP32 "%s: FIFO is stuck\n", p->name);
+
+ /* Stop all transfers.
+ *
+ * Microsoft's document instructs to drive DCR_STROBE to 0,
+ * but it doesn't work (at least in Compatibility mode, not
+ * tested in ECP mode). Switching directly to Test mode (as
+ * in parport_pc) is not an option: it does confuse the port,
+ * ECP service interrupts are no more working after that. A
+ * hard reset is then needed to revert to a sane state.
+ *
+ * Let's hope that the FIFO is really stuck and that the
+ * peripheral doesn't wake up now.
+ */
+ parport_ip32_frob_control(p, DCR_STROBE, 0);
+
+ /* Fill up FIFO */
+ for (residue = priv->fifo_depth; residue > 0; residue--) {
+ if (parport_ip32_read_econtrol(p) & ECR_F_FULL)
+ break;
+ writeb(0x00, priv->regs.fifo);
+ }
+ }
+ if (residue)
+ pr_debug1(PPIP32 "%s: %d PWord%s left in FIFO\n",
+ p->name, residue,
+ (residue == 1) ? " was" : "s were");
+
+ /* Now reset the FIFO */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+
+ /* Host recovery for ECP mode */
+ if (mode == ECR_MODE_ECP) {
+ parport_ip32_data_reverse(p);
+ parport_ip32_frob_control(p, DCR_nINIT, 0);
+ if (parport_wait_peripheral(p, DSR_PERROR, 0))
+ pr_debug1(PPIP32 "%s: PEerror timeout 1 in %s\n",
+ p->name, __func__);
+ parport_ip32_frob_control(p, DCR_STROBE, DCR_STROBE);
+ parport_ip32_frob_control(p, DCR_nINIT, DCR_nINIT);
+ if (parport_wait_peripheral(p, DSR_PERROR, DSR_PERROR))
+ pr_debug1(PPIP32 "%s: PEerror timeout 2 in %s\n",
+ p->name, __func__);
+ }
+
+ /* Adjust residue if needed */
+ parport_ip32_set_mode(p, ECR_MODE_CFG);
+ cnfga = readb(priv->regs.cnfgA);
+ if (!(cnfga & CNFGA_nBYTEINTRANS)) {
+ pr_debug1(PPIP32 "%s: cnfgA contains 0x%02x\n",
+ p->name, cnfga);
+ pr_debug1(PPIP32 "%s: Accounting for extra byte\n",
+ p->name);
+ residue++;
+ }
+
+ /* Don't care about partial PWords since we do not support
+ * PWord != 1 byte. */
+
+ /* Back to forward PS2 mode. */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ parport_ip32_data_forward(p);
+
+ return residue;
+}
+
+/**
+ * parport_ip32_compat_write_data - write a block of data in SPP mode
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ * @flags: ignored
+ */
+static size_t parport_ip32_compat_write_data(struct parport *p,
+ const void *buf, size_t len,
+ int flags)
+{
+ static unsigned int ready_before = 1;
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ struct parport * const physport = p->physport;
+ size_t written = 0;
+
+ /* Special case: a timeout of zero means we cannot call schedule().
+ * Also if O_NONBLOCK is set then use the default implementation. */
+ if (physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+ return parport_ieee1284_write_compat(p, buf, len, flags);
+
+ /* Reset FIFO, go in forward mode, and disable ackIntEn */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+ parport_ip32_data_forward(p);
+ parport_ip32_disable_irq(p);
+ parport_ip32_set_mode(p, ECR_MODE_PPF);
+ physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+ /* Wait for peripheral to become ready */
+ if (parport_wait_peripheral(p, DSR_nBUSY | DSR_nFAULT,
+ DSR_nBUSY | DSR_nFAULT)) {
+ /* Avoid to flood the logs */
+ if (ready_before)
+ printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
+ p->name, __func__);
+ ready_before = 0;
+ goto stop;
+ }
+ ready_before = 1;
+
+ written = parport_ip32_fifo_write_block(p, buf, len);
+
+ /* Wait FIFO to empty. Timeout is proportional to FIFO_depth. */
+ parport_ip32_drain_fifo(p, physport->cad->timeout * priv->fifo_depth);
+
+ /* Check for a potential residue */
+ written -= parport_ip32_get_fifo_residue(p, ECR_MODE_PPF);
+
+ /* Then, wait for BUSY to get low. */
+ if (parport_wait_peripheral(p, DSR_nBUSY, DSR_nBUSY))
+ printk(KERN_DEBUG PPIP32 "%s: BUSY timeout in %s\n",
+ p->name, __func__);
+
+stop:
+ /* Reset FIFO */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+ return written;
+}
+
+/*
+ * FIXME - Insert here parport_ip32_ecp_read_data().
+ */
+
+/**
+ * parport_ip32_ecp_write_data - write a block of data in ECP mode
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ * @flags: ignored
+ */
+static size_t parport_ip32_ecp_write_data(struct parport *p,
+ const void *buf, size_t len,
+ int flags)
+{
+ static unsigned int ready_before = 1;
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ struct parport * const physport = p->physport;
+ size_t written = 0;
+
+ /* Special case: a timeout of zero means we cannot call schedule().
+ * Also if O_NONBLOCK is set then use the default implementation. */
+ if (physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+ return parport_ieee1284_ecp_write_data(p, buf, len, flags);
+
+ /* Negotiate to forward mode if necessary. */
+ if (physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
+ /* Event 47: Set nInit high. */
+ parport_ip32_frob_control(p, DCR_nINIT | DCR_AUTOFD,
+ DCR_nINIT | DCR_AUTOFD);
+
+ /* Event 49: PError goes high. */
+ if (parport_wait_peripheral(p, DSR_PERROR, DSR_PERROR)) {
+ printk(KERN_DEBUG PPIP32 "%s: PError timeout in %s",
+ p->name, __func__);
+ physport->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
+ return 0;
+ }
+ }
+
+ /* Reset FIFO, go in forward mode, and disable ackIntEn */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+ parport_ip32_data_forward(p);
+ parport_ip32_disable_irq(p);
+ parport_ip32_set_mode(p, ECR_MODE_ECP);
+ physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+ /* Wait for peripheral to become ready */
+ if (parport_wait_peripheral(p, DSR_nBUSY | DSR_nFAULT,
+ DSR_nBUSY | DSR_nFAULT)) {
+ /* Avoid to flood the logs */
+ if (ready_before)
+ printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
+ p->name, __func__);
+ ready_before = 0;
+ goto stop;
+ }
+ ready_before = 1;
+
+ written = parport_ip32_fifo_write_block(p, buf, len);
+
+ /* Wait FIFO to empty. Timeout is proportional to FIFO_depth. */
+ parport_ip32_drain_fifo(p, physport->cad->timeout * priv->fifo_depth);
+
+ /* Check for a potential residue */
+ written -= parport_ip32_get_fifo_residue(p, ECR_MODE_ECP);
+
+ /* Then, wait for BUSY to get low. */
+ if (parport_wait_peripheral(p, DSR_nBUSY, DSR_nBUSY))
+ printk(KERN_DEBUG PPIP32 "%s: BUSY timeout in %s\n",
+ p->name, __func__);
+
+stop:
+ /* Reset FIFO */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+ return written;
+}
+
+/*
+ * FIXME - Insert here parport_ip32_ecp_write_addr().
+ */
+
+/*--- Default parport operations ---------------------------------------*/
+
+static __initdata struct parport_operations parport_ip32_ops = {
+ .write_data = parport_ip32_write_data,
+ .read_data = parport_ip32_read_data,
+
+ .write_control = parport_ip32_write_control,
+ .read_control = parport_ip32_read_control,
+ .frob_control = parport_ip32_frob_control,
+
+ .read_status = parport_ip32_read_status,
+
+ .enable_irq = parport_ip32_enable_irq,
+ .disable_irq = parport_ip32_disable_irq,
+
+ .data_forward = parport_ip32_data_forward,
+ .data_reverse = parport_ip32_data_reverse,
+
+ .init_state = parport_ip32_init_state,
+ .save_state = parport_ip32_save_state,
+ .restore_state = parport_ip32_restore_state,
+
+ .epp_write_data = parport_ieee1284_epp_write_data,
+ .epp_read_data = parport_ieee1284_epp_read_data,
+ .epp_write_addr = parport_ieee1284_epp_write_addr,
+ .epp_read_addr = parport_ieee1284_epp_read_addr,
+
+ .ecp_write_data = parport_ieee1284_ecp_write_data,
+ .ecp_read_data = parport_ieee1284_ecp_read_data,
+ .ecp_write_addr = parport_ieee1284_ecp_write_addr,
+
+ .compat_write_data = parport_ieee1284_write_compat,
+ .nibble_read_data = parport_ieee1284_read_nibble,
+ .byte_read_data = parport_ieee1284_read_byte,
+
+ .owner = THIS_MODULE,
+};
+
+/*--- Device detection -------------------------------------------------*/
+
+/**
+ * parport_ip32_ecp_supported - check for an ECP port
+ * @p: pointer to the &parport structure
+ *
+ * Returns 1 if an ECP port is found, and 0 otherwise. This function actually
+ * checks if an Extended Control Register seems to be present. On successful
+ * return, the port is placed in SPP mode.
+ */
+static __init unsigned int parport_ip32_ecp_supported(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ unsigned int ecr;
+
+ ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
+ writeb(ecr, priv->regs.ecr);
+ if (readb(priv->regs.ecr) != (ecr | ECR_F_EMPTY))
+ goto fail;
+
+ pr_probe(p, "Found working ECR register\n");
+ parport_ip32_set_mode(p, ECR_MODE_SPP);
+ parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+ return 1;
+
+fail:
+ pr_probe(p, "ECR register not found\n");
+ return 0;
+}
+
+/**
+ * parport_ip32_fifo_supported - check for FIFO parameters
+ * @p: pointer to the &parport structure
+ *
+ * Check for FIFO parameters of an Extended Capabilities Port. Returns 1 on
+ * success, and 0 otherwise. Adjust FIFO parameters in the parport structure.
+ * On return, the port is placed in SPP mode.
+ */
+static __init unsigned int parport_ip32_fifo_supported(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ unsigned int configa, configb;
+ unsigned int pword;
+ unsigned int i;
+
+ /* Configuration mode */
+ parport_ip32_set_mode(p, ECR_MODE_CFG);
+ configa = readb(priv->regs.cnfgA);
+ configb = readb(priv->regs.cnfgB);
+
+ /* Find out PWord size */
+ switch (configa & CNFGA_ID_MASK) {
+ case CNFGA_ID_8:
+ pword = 1;
+ break;
+ case CNFGA_ID_16:
+ pword = 2;
+ break;
+ case CNFGA_ID_32:
+ pword = 4;
+ break;
+ default:
+ pr_probe(p, "Unknown implementation ID: 0x%0x\n",
+ (configa & CNFGA_ID_MASK) >> CNFGA_ID_SHIFT);
+ goto fail;
+ break;
+ }
+ if (pword != 1) {
+ pr_probe(p, "Unsupported PWord size: %u\n", pword);
+ goto fail;
+ }
+ priv->pword = pword;
+ pr_probe(p, "PWord is %u bits\n", 8 * priv->pword);
+
+ /* Check for compression support */
+ writeb(configb | CNFGB_COMPRESS, priv->regs.cnfgB);
+ if (readb(priv->regs.cnfgB) & CNFGB_COMPRESS)
+ pr_probe(p, "Hardware compression detected (unsupported)\n");
+ writeb(configb & ~CNFGB_COMPRESS, priv->regs.cnfgB);
+
+ /* Reset FIFO and go in test mode (no interrupt, no DMA) */
+ parport_ip32_set_mode(p, ECR_MODE_TST);
+
+ /* FIFO must be empty now */
+ if (!(readb(priv->regs.ecr) & ECR_F_EMPTY)) {
+ pr_probe(p, "FIFO not reset\n");
+ goto fail;
+ }
+
+ /* Find out FIFO depth. */
+ priv->fifo_depth = 0;
+ for (i = 0; i < 1024; i++) {
+ if (readb(priv->regs.ecr) & ECR_F_FULL) {
+ /* FIFO full */
+ priv->fifo_depth = i;
+ break;
+ }
+ writeb((u8)i, priv->regs.fifo);
+ }
+ if (i >= 1024) {
+ pr_probe(p, "Can't fill FIFO\n");
+ goto fail;
+ }
+ if (!priv->fifo_depth) {
+ pr_probe(p, "Can't get FIFO depth\n");
+ goto fail;
+ }
+ pr_probe(p, "FIFO is %u PWords deep\n", priv->fifo_depth);
+
+ /* Enable interrupts */
+ parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);
+
+ /* Find out writeIntrThreshold: number of PWords we know we can write
+ * if we get an interrupt. */
+ priv->writeIntrThreshold = 0;
+ for (i = 0; i < priv->fifo_depth; i++) {
+ if (readb(priv->regs.fifo) != (u8)i) {
+ pr_probe(p, "Invalid data in FIFO\n");
+ goto fail;
+ }
+ if (!priv->writeIntrThreshold
+ && readb(priv->regs.ecr) & ECR_SERVINTR)
+ /* writeIntrThreshold reached */
+ priv->writeIntrThreshold = i + 1;
+ if (i + 1 < priv->fifo_depth
+ && readb(priv->regs.ecr) & ECR_F_EMPTY) {
+ /* FIFO empty before the last byte? */
+ pr_probe(p, "Data lost in FIFO\n");
+ goto fail;
+ }
+ }
+ if (!priv->writeIntrThreshold) {
+ pr_probe(p, "Can't get writeIntrThreshold\n");
+ goto fail;
+ }
+ pr_probe(p, "writeIntrThreshold is %u\n", priv->writeIntrThreshold);
+
+ /* FIFO must be empty now */
+ if (!(readb(priv->regs.ecr) & ECR_F_EMPTY)) {
+ pr_probe(p, "Can't empty FIFO\n");
+ goto fail;
+ }
+
+ /* Reset FIFO */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ /* Set reverse direction (must be in PS2 mode) */
+ parport_ip32_data_reverse(p);
+ /* Test FIFO, no interrupt, no DMA */
+ parport_ip32_set_mode(p, ECR_MODE_TST);
+ /* Enable interrupts */
+ parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);
+
+ /* Find out readIntrThreshold: number of PWords we can read if we get
+ * an interrupt. */
+ priv->readIntrThreshold = 0;
+ for (i = 0; i < priv->fifo_depth; i++) {
+ writeb(0xaa, priv->regs.fifo);
+ if (readb(priv->regs.ecr) & ECR_SERVINTR) {
+ /* readIntrThreshold reached */
+ priv->readIntrThreshold = i + 1;
+ break;
+ }
+ }
+ if (!priv->readIntrThreshold) {
+ pr_probe(p, "Can't get readIntrThreshold\n");
+ goto fail;
+ }
+ pr_probe(p, "readIntrThreshold is %u\n", priv->readIntrThreshold);
+
+ /* Reset ECR */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ parport_ip32_data_forward(p);
+ parport_ip32_set_mode(p, ECR_MODE_SPP);
+ return 1;
+
+fail:
+ priv->fifo_depth = 0;
+ parport_ip32_set_mode(p, ECR_MODE_SPP);
+ return 0;
+}
+
+/*--- Initialization code ----------------------------------------------*/
+
+/**
+ * parport_ip32_make_isa_registers - compute (ISA) register addresses
+ * @regs: pointer to &struct parport_ip32_regs to fill
+ * @base: base address of standard and EPP registers
+ * @base_hi: base address of ECP registers
+ * @regshift: how much to shift register offset by
+ *
+ * Compute register addresses, according to the ISA standard. The addresses
+ * of the standard and EPP registers are computed from address @base. The
+ * addresses of the ECP registers are computed from address @base_hi.
+ */
+static void __init
+parport_ip32_make_isa_registers(struct parport_ip32_regs *regs,
+ void __iomem *base, void __iomem *base_hi,
+ unsigned int regshift)
+{
+#define r_base(offset) ((u8 __iomem *)base + ((offset) << regshift))
+#define r_base_hi(offset) ((u8 __iomem *)base_hi + ((offset) << regshift))
+ *regs = (struct parport_ip32_regs){
+ .data = r_base(0),
+ .dsr = r_base(1),
+ .dcr = r_base(2),
+ .eppAddr = r_base(3),
+ .eppData0 = r_base(4),
+ .eppData1 = r_base(5),
+ .eppData2 = r_base(6),
+ .eppData3 = r_base(7),
+ .ecpAFifo = r_base(0),
+ .fifo = r_base_hi(0),
+ .cnfgA = r_base_hi(0),
+ .cnfgB = r_base_hi(1),
+ .ecr = r_base_hi(2)
+ };
+#undef r_base_hi
+#undef r_base
+}
+
+/**
+ * parport_ip32_probe_port - probe and register IP32 built-in parallel port
+ *
+ * Returns the new allocated &parport structure. On error, an error code is
+ * encoded in return value with the ERR_PTR function.
+ */
+static __init struct parport *parport_ip32_probe_port(void)
+{
+ struct parport_ip32_regs regs;
+ struct parport_ip32_private *priv = NULL;
+ struct parport_operations *ops = NULL;
+ struct parport *p = NULL;
+ int err;
+
+ parport_ip32_make_isa_registers(®s, &mace->isa.parallel,
+ &mace->isa.ecp1284, 8 /* regshift */);
+
+ ops = kmalloc(sizeof(struct parport_operations), GFP_KERNEL);
+ priv = kmalloc(sizeof(struct parport_ip32_private), GFP_KERNEL);
+ p = parport_register_port(0, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, ops);
+ if (ops == NULL || priv == NULL || p == NULL) {
+ err = -ENOMEM;
+ goto fail;
+ }
+ p->base = MACE_BASE + offsetof(struct sgi_mace, isa.parallel);
+ p->base_hi = MACE_BASE + offsetof(struct sgi_mace, isa.ecp1284);
+ p->private_data = priv;
+
+ *ops = parport_ip32_ops;
+ *priv = (struct parport_ip32_private){
+ .regs = regs,
+ .dcr_writable = DCR_DIR | DCR_SELECT | DCR_nINIT |
+ DCR_AUTOFD | DCR_STROBE,
+ .irq_mode = PARPORT_IP32_IRQ_FWD,
+ };
+ init_completion(&priv->irq_complete);
+
+ /* Probe port. */
+ if (!parport_ip32_ecp_supported(p)) {
+ err = -ENODEV;
+ goto fail;
+ }
+ parport_ip32_dump_state(p, "begin init", 0);
+
+ /* We found what looks like a working ECR register. Simply assume
+ * that all modes are correctly supported. Enable basic modes. */
+ p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
+ p->modes |= PARPORT_MODE_TRISTATE;
+
+ if (!parport_ip32_fifo_supported(p)) {
+ printk(KERN_WARNING PPIP32
+ "%s: error: FIFO disabled\n", p->name);
+ /* Disable hardware modes depending on a working FIFO. */
+ features &= ~PARPORT_IP32_ENABLE_SPP;
+ features &= ~PARPORT_IP32_ENABLE_ECP;
+ /* DMA is not needed if FIFO is not supported. */
+ features &= ~PARPORT_IP32_ENABLE_DMA;
+ }
+
+ /* Request IRQ */
+ if (features & PARPORT_IP32_ENABLE_IRQ) {
+ int irq = MACEISA_PARALLEL_IRQ;
+ if (request_irq(irq, parport_ip32_interrupt, 0, p->name, p)) {
+ printk(KERN_WARNING PPIP32
+ "%s: error: IRQ disabled\n", p->name);
+ /* DMA cannot work without interrupts. */
+ features &= ~PARPORT_IP32_ENABLE_DMA;
+ } else {
+ pr_probe(p, "Interrupt support enabled\n");
+ p->irq = irq;
+ priv->dcr_writable |= DCR_IRQ;
+ }
+ }
+
+ /* Allocate DMA resources */
+ if (features & PARPORT_IP32_ENABLE_DMA) {
+ if (parport_ip32_dma_register())
+ printk(KERN_WARNING PPIP32
+ "%s: error: DMA disabled\n", p->name);
+ else {
+ pr_probe(p, "DMA support enabled\n");
+ p->dma = 0; /* arbitrary value != PARPORT_DMA_NONE */
+ p->modes |= PARPORT_MODE_DMA;
+ }
+ }
+
+ if (features & PARPORT_IP32_ENABLE_SPP) {
+ /* Enable compatibility FIFO mode */
+ p->ops->compat_write_data = parport_ip32_compat_write_data;
+ p->modes |= PARPORT_MODE_COMPAT;
+ pr_probe(p, "Hardware support for SPP mode enabled\n");
+ }
+ if (features & PARPORT_IP32_ENABLE_EPP) {
+ /* Set up access functions to use EPP hardware. */
+ p->ops->epp_read_data = parport_ip32_epp_read_data;
+ p->ops->epp_write_data = parport_ip32_epp_write_data;
+ p->ops->epp_read_addr = parport_ip32_epp_read_addr;
+ p->ops->epp_write_addr = parport_ip32_epp_write_addr;
+ p->modes |= PARPORT_MODE_EPP;
+ pr_probe(p, "Hardware support for EPP mode enabled\n");
+ }
+ if (features & PARPORT_IP32_ENABLE_ECP) {
+ /* Enable ECP FIFO mode */
+ p->ops->ecp_write_data = parport_ip32_ecp_write_data;
+ /* FIXME - not implemented */
+/* p->ops->ecp_read_data = parport_ip32_ecp_read_data; */
+/* p->ops->ecp_write_addr = parport_ip32_ecp_write_addr; */
+ p->modes |= PARPORT_MODE_ECP;
+ pr_probe(p, "Hardware support for ECP mode enabled\n");
+ }
+
+ /* Initialize the port with sensible values */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+ parport_ip32_data_forward(p);
+ parport_ip32_disable_irq(p);
+ parport_ip32_write_data(p, 0x00);
+ parport_ip32_dump_state(p, "end init", 0);
+
+ /* Print out what we found */
+ printk(KERN_INFO "%s: SGI IP32 at 0x%lx (0x%lx)",
+ p->name, p->base, p->base_hi);
+ if (p->irq != PARPORT_IRQ_NONE)
+ printk(", irq %d", p->irq);
+ printk(" [");
+#define printmode(x) if (p->modes & PARPORT_MODE_##x) \
+ printk("%s%s", f++ ? "," : "", #x)
+ {
+ unsigned int f = 0;
+ printmode(PCSPP);
+ printmode(TRISTATE);
+ printmode(COMPAT);
+ printmode(EPP);
+ printmode(ECP);
+ printmode(DMA);
+ }
+#undef printmode
+ printk("]\n");
+
+ parport_announce_port(p);
+ return p;
+
+fail:
+ if (p)
+ parport_put_port(p);
+ kfree(priv);
+ kfree(ops);
+ return ERR_PTR(err);
+}
+
+/**
+ * parport_ip32_unregister_port - unregister a parallel port
+ * @p: pointer to the &struct parport
+ *
+ * Unregisters a parallel port and free previously allocated resources
+ * (memory, IRQ, ...).
+ */
+static __exit void parport_ip32_unregister_port(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ struct parport_operations *ops = p->ops;
+
+ parport_remove_port(p);
+ if (p->modes & PARPORT_MODE_DMA)
+ parport_ip32_dma_unregister();
+ if (p->irq != PARPORT_IRQ_NONE)
+ free_irq(p->irq, p);
+ parport_put_port(p);
+ kfree(priv);
+ kfree(ops);
+}
+
+/**
+ * parport_ip32_init - module initialization function
+ */
+static int __init parport_ip32_init(void)
+{
+ pr_info(PPIP32 "SGI IP32 built-in parallel port driver v0.6\n");
+ pr_debug1(PPIP32 "Compiled on %s, %s\n", __DATE__, __TIME__);
+ this_port = parport_ip32_probe_port();
+ return IS_ERR(this_port) ? PTR_ERR(this_port) : 0;
+}
+
+/**
+ * parport_ip32_exit - module termination function
+ */
+static void __exit parport_ip32_exit(void)
+{
+ parport_ip32_unregister_port(this_port);
+}
+
+/*--- Module stuff -----------------------------------------------------*/
+
+MODULE_AUTHOR("Arnaud Giersch <arnaud.giersch@free.fr>");
+MODULE_DESCRIPTION("SGI IP32 built-in parallel port driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.6"); /* update in parport_ip32_init() too */
+
+module_init(parport_ip32_init);
+module_exit(parport_ip32_exit);
+
+module_param(verbose_probing, bool, S_IRUGO);
+MODULE_PARM_DESC(verbose_probing, "Log chit-chat during initialization");
+
+module_param(features, uint, S_IRUGO);
+MODULE_PARM_DESC(features,
+ "Bit mask of features to enable"
+ ", bit 0: IRQ support"
+ ", bit 1: DMA support"
+ ", bit 2: hardware SPP mode"
+ ", bit 3: hardware EPP mode"
+ ", bit 4: hardware ECP mode");
+
+/*--- Inform (X)Emacs about preferred coding style ---------------------*/
+/*
+ * Local Variables:
+ * mode: c
+ * c-file-style: "linux"
+ * indent-tabs-mode: t
+ * tab-width: 8
+ * fill-column: 78
+ * ispell-local-dictionary: "american"
+ * End:
+ */
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index 76dd077..166de35 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -329,9 +329,9 @@
if (priv->num_par == ARRAY_SIZE (priv->port)) {
printk (KERN_WARNING
- "parport_serial: %s: only %u parallel ports "
+ "parport_serial: %s: only %zu parallel ports "
"supported (%d reported)\n", pci_name (dev),
- ARRAY_SIZE (priv->port), card->numports);
+ ARRAY_SIZE(priv->port), card->numports);
break;
}
diff --git a/drivers/parport/probe.c b/drivers/parport/probe.c
index b62aee8..ea83b70 100644
--- a/drivers/parport/probe.c
+++ b/drivers/parport/probe.c
@@ -199,7 +199,7 @@
if (port->physport->ieee1284.phase != IEEE1284_PH_HBUSY_DAVAIL) {
if (belen != len) {
- printk (KERN_DEBUG "%s: Device ID was %d bytes"
+ printk (KERN_DEBUG "%s: Device ID was %zd bytes"
" while device told it would be %d"
" bytes\n",
port->name, len, belen);
@@ -214,7 +214,7 @@
if (buffer[len-1] == ';') {
printk (KERN_DEBUG "%s: Device ID reading stopped"
" before device told data not available. "
- "Current idlen %d of %d, len bytes %02X %02X\n",
+ "Current idlen %u of %u, len bytes %02X %02X\n",
port->name, current_idlen, numidlens,
length[0], length[1]);
goto done;
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 2f1289e..222a1cc 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -11,8 +11,7 @@
---help---
Say Y here if you have a motherboard with a PCI Hotplug controller.
This allows you to add and remove PCI cards while the machine is
- powered up and running. The file system pcihpfs must be mounted
- in order to interact with any PCI Hotplug controllers.
+ powered up and running.
To compile this driver as a module, choose M here: the
module will be called pci_hotplug.
diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c
index 7e7f913..317457d 100644
--- a/drivers/pci/hotplug/acpiphp_ibm.c
+++ b/drivers/pci/hotplug/acpiphp_ibm.c
@@ -302,7 +302,7 @@
}
package = (union acpi_object *) buffer.pointer;
- if(!(package) ||
+ if (!(package) ||
(package->type != ACPI_TYPE_PACKAGE) ||
!(package->package.elements)) {
err("%s: Invalid APCI object\n", __FUNCTION__);
@@ -405,7 +405,7 @@
}
info.hardware_id.value[sizeof(info.hardware_id.value) - 1] = '\0';
- if(info.current_status && (info.valid & ACPI_VALID_HID) &&
+ if (info.current_status && (info.valid & ACPI_VALID_HID) &&
(!strcmp(info.hardware_id.value, IBM_HARDWARE_ID1) ||
!strcmp(info.hardware_id.value, IBM_HARDWARE_ID2))) {
dbg("found hardware: %s, handle: %p\n", info.hardware_id.value,
@@ -449,13 +449,11 @@
}
ibm_note.device = device;
- status = acpi_install_notify_handler(
- ibm_acpi_handle,
- ACPI_DEVICE_NOTIFY,
- ibm_handle_events,
+ status = acpi_install_notify_handler(ibm_acpi_handle,
+ ACPI_DEVICE_NOTIFY, ibm_handle_events,
&ibm_note);
if (ACPI_FAILURE(status)) {
- err("%s: Failed to register notification handler\n",
+ err("%s: Failed to register notification handler\n",
__FUNCTION__);
retval = -EBUSY;
goto init_cleanup;
@@ -482,14 +480,13 @@
if (acpiphp_unregister_attention(&ibm_attention_info))
err("%s: attention info deregistration failed", __FUNCTION__);
- status = acpi_remove_notify_handler(
+ status = acpi_remove_notify_handler(
ibm_acpi_handle,
ACPI_DEVICE_NOTIFY,
ibm_handle_events);
- if (ACPI_FAILURE(status))
- err("%s: Notification handler removal failed\n",
- __FUNCTION__);
- // remove the /sys entries
+ if (ACPI_FAILURE(status))
+ err("%s: Notification handler removal failed\n", __FUNCTION__);
+ /* remove the /sys entries */
if (sysfs_remove_bin_file(sysdir, &ibm_apci_table_attr))
err("%s: removal of sysfs file apci_table failed\n",
__FUNCTION__);
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index aabf1e7..dc59da6 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -235,12 +235,12 @@
{
int rc = 0;
struct slot *pslot;
- u8 cmd;
+ u8 cmd = 0x00; /* avoid compiler warning */
debug("set_attention_status - Entry hotplug_slot[%lx] value[%x]\n",
(ulong) hotplug_slot, value);
ibmphp_lock_operations();
- cmd = 0x00; // avoid compiler warning
+
if (hotplug_slot) {
switch (value) {
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index 7d93dba..3eefe2c 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -103,13 +103,13 @@
struct list_head *tmp, *n;
struct slot *slot;
- list_for_each_safe(tmp, n, &rpaphp_slot_head) {
- slot = list_entry(tmp, struct slot, rpaphp_slot_list);
- if (slot->dn == dn)
- return slot;
- }
+ list_for_each_safe(tmp, n, &rpaphp_slot_head) {
+ slot = list_entry(tmp, struct slot, rpaphp_slot_list);
+ if (slot->dn == dn)
+ return slot;
+ }
- return NULL;
+ return NULL;
}
static struct pci_dev *dlpar_find_new_dev(struct pci_bus *parent,
@@ -126,9 +126,9 @@
return NULL;
}
-static struct pci_dev *dlpar_pci_add_bus(struct device_node *dn)
+static void dlpar_pci_add_bus(struct device_node *dn)
{
- struct pci_dn *pdn = dn->data;
+ struct pci_dn *pdn = PCI_DN(dn);
struct pci_controller *phb = pdn->phb;
struct pci_dev *dev = NULL;
@@ -139,52 +139,52 @@
if (!dev) {
printk(KERN_ERR "%s: failed to create pci dev for %s\n",
__FUNCTION__, dn->full_name);
- return NULL;
+ return;
}
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
of_scan_pci_bridge(dn, dev);
- rpaphp_init_new_devs(dev->subordinate);
+ pcibios_fixup_new_pci_devices(dev->subordinate,0);
/* Claim new bus resources */
pcibios_claim_one_bus(dev->bus);
/* ioremap() for child bus, which may or may not succeed */
- (void) remap_bus_range(dev->bus);
+ remap_bus_range(dev->subordinate);
/* Add new devices to global lists. Register in proc, sysfs. */
pci_bus_add_devices(phb->bus);
-
- /* Confirm new bridge dev was created */
- dev = dlpar_find_new_dev(phb->bus, dn);
- if (dev) {
- if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
- printk(KERN_ERR "%s: unexpected header type %d\n",
- __FUNCTION__, dev->hdr_type);
- return NULL;
- }
- }
-
- return dev;
}
static int dlpar_add_pci_slot(char *drc_name, struct device_node *dn)
{
struct pci_dev *dev;
+ struct pci_controller *phb;
- if (rpaphp_find_pci_bus(dn))
+ if (pcibios_find_pci_bus(dn))
return -EINVAL;
/* Add pci bus */
- dev = dlpar_pci_add_bus(dn);
+ dlpar_pci_add_bus(dn);
+
+ /* Confirm new bridge dev was created */
+ phb = PCI_DN(dn)->phb;
+ dev = dlpar_find_new_dev(phb->bus, dn);
+
if (!dev) {
printk(KERN_ERR "%s: unable to add bus %s\n", __FUNCTION__,
drc_name);
return -EIO;
}
+ if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
+ printk(KERN_ERR "%s: unexpected header type %d, unable to add bus %s\n",
+ __FUNCTION__, dev->hdr_type, drc_name);
+ return -EIO;
+ }
+
/* Add hotplug slot */
if (rpaphp_add_slot(dn)) {
printk(KERN_ERR "%s: unable to add hotplug slot %s\n",
@@ -221,13 +221,13 @@
struct pci_dn *pdn;
int rc = 0;
- if (!rpaphp_find_pci_bus(dn))
+ if (!pcibios_find_pci_bus(dn))
return -EINVAL;
slot = find_slot(dn);
if (slot) {
/* Remove hotplug slot */
- if (rpaphp_remove_slot(slot)) {
+ if (rpaphp_deregister_slot(slot)) {
printk(KERN_ERR
"%s: unable to remove hotplug slot %s\n",
__FUNCTION__, drc_name);
@@ -366,21 +366,25 @@
struct pci_bus *bus;
struct slot *slot;
- bus = rpaphp_find_pci_bus(dn);
+ bus = pcibios_find_pci_bus(dn);
if (!bus)
return -EINVAL;
slot = find_slot(dn);
if (slot) {
/* Remove hotplug slot */
- if (rpaphp_remove_slot(slot)) {
+ if (rpaphp_deregister_slot(slot)) {
printk(KERN_ERR
"%s: unable to remove hotplug slot %s\n",
__FUNCTION__, drc_name);
return -EIO;
}
} else {
- rpaphp_unconfig_pci_adapter(bus);
+ struct pci_dev *dev, *tmp;
+ list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
+ eeh_remove_bus_device(dev);
+ pci_remove_bus_device(dev);
+ }
}
if (unmap_bus_range(bus)) {
diff --git a/drivers/pci/hotplug/rpaphp.h b/drivers/pci/hotplug/rpaphp.h
index 57ea71a..310b618 100644
--- a/drivers/pci/hotplug/rpaphp.h
+++ b/drivers/pci/hotplug/rpaphp.h
@@ -88,16 +88,10 @@
/* function prototypes */
/* rpaphp_pci.c */
-extern struct pci_bus *rpaphp_find_pci_bus(struct device_node *dn);
-extern int rpaphp_claim_resource(struct pci_dev *dev, int resource);
extern int rpaphp_enable_pci_slot(struct slot *slot);
-extern int register_pci_slot(struct slot *slot);
+extern int rpaphp_register_pci_slot(struct slot *slot);
extern int rpaphp_get_pci_adapter_status(struct slot *slot, int is_init, u8 * value);
-extern void rpaphp_init_new_devs(struct pci_bus *bus);
-extern void rpaphp_eeh_init_nodes(struct device_node *dn);
-
-extern int rpaphp_config_pci_adapter(struct pci_bus *bus);
-extern int rpaphp_unconfig_pci_adapter(struct pci_bus *bus);
+extern int rpaphp_get_sensor_state(struct slot *slot, int *state);
/* rpaphp_core.c */
extern int rpaphp_add_slot(struct device_node *dn);
@@ -108,8 +102,8 @@
/* rpaphp_slot.c */
extern void dealloc_slot_struct(struct slot *slot);
extern struct slot *alloc_slot_struct(struct device_node *dn, int drc_index, char *drc_name, int power_domain);
-extern int register_slot(struct slot *slot);
-extern int deregister_slot(struct slot *slot);
+extern int rpaphp_register_slot(struct slot *slot);
+extern int rpaphp_deregister_slot(struct slot *slot);
extern int rpaphp_get_power_status(struct slot *slot, u8 * value);
extern int rpaphp_set_attention_status(struct slot *slot, u8 status);
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index cf075c3..6e79f56 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -56,25 +56,6 @@
module_param(debug, bool, 0644);
-static int enable_slot(struct hotplug_slot *slot);
-static int disable_slot(struct hotplug_slot *slot);
-static int set_attention_status(struct hotplug_slot *slot, u8 value);
-static int get_power_status(struct hotplug_slot *slot, u8 * value);
-static int get_attention_status(struct hotplug_slot *slot, u8 * value);
-static int get_adapter_status(struct hotplug_slot *slot, u8 * value);
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value);
-
-struct hotplug_slot_ops rpaphp_hotplug_slot_ops = {
- .owner = THIS_MODULE,
- .enable_slot = enable_slot,
- .disable_slot = disable_slot,
- .set_attention_status = set_attention_status,
- .get_power_status = get_power_status,
- .get_attention_status = get_attention_status,
- .get_adapter_status = get_adapter_status,
- .get_max_bus_speed = get_max_bus_speed,
-};
-
static int rpaphp_get_attention_status(struct slot *slot)
{
return slot->hotplug_slot->info->attention_status;
@@ -196,11 +177,6 @@
return 0;
}
-int rpaphp_remove_slot(struct slot *slot)
-{
- return deregister_slot(slot);
-}
-
static int get_children_props(struct device_node *dn, int **drc_indexes,
int **drc_names, int **drc_types, int **drc_power_domains)
{
@@ -307,13 +283,15 @@
return 0;
}
-/****************************************************************
+/**
+ * rpaphp_add_slot -- add hotplug or dlpar slot
+ *
* rpaphp not only registers PCI hotplug slots(HOTPLUG),
* but also logical DR slots(EMBEDDED).
* HOTPLUG slot: An adapter can be physically added/removed.
* EMBEDDED slot: An adapter can be logically removed/added
* from/to a partition with the slot.
- ***************************************************************/
+ */
int rpaphp_add_slot(struct device_node *dn)
{
struct slot *slot;
@@ -344,7 +322,7 @@
dbg("Found drc-index:0x%x drc-name:%s drc-type:%s\n",
indexes[i + 1], name, type);
- retval = register_pci_slot(slot);
+ retval = rpaphp_register_pci_slot(slot);
}
}
exit:
@@ -393,53 +371,85 @@
cleanup_slots();
}
+static int __enable_slot(struct slot *slot)
+{
+ int state;
+ int retval;
+
+ if (slot->state == CONFIGURED)
+ return 0;
+
+ retval = rpaphp_get_sensor_state(slot, &state);
+ if (retval)
+ return retval;
+
+ if (state == PRESENT) {
+ pcibios_add_pci_devices(slot->bus);
+ slot->state = CONFIGURED;
+ } else if (state == EMPTY) {
+ slot->state = EMPTY;
+ } else {
+ err("%s: slot[%s] is in invalid state\n", __FUNCTION__, slot->name);
+ slot->state = NOT_VALID;
+ return -EINVAL;
+ }
+ return 0;
+}
+
static int enable_slot(struct hotplug_slot *hotplug_slot)
{
- int retval = 0;
+ int retval;
struct slot *slot = (struct slot *)hotplug_slot->private;
- if (slot->state == CONFIGURED) {
- dbg("%s: %s is already enabled\n", __FUNCTION__, slot->name);
- goto exit;
+ down(&rpaphp_sem);
+ retval = __enable_slot(slot);
+ up(&rpaphp_sem);
+
+ return retval;
+}
+
+static int __disable_slot(struct slot *slot)
+{
+ struct pci_dev *dev, *tmp;
+
+ if (slot->state == NOT_CONFIGURED)
+ return -EINVAL;
+
+ list_for_each_entry_safe(dev, tmp, &slot->bus->devices, bus_list) {
+ eeh_remove_bus_device(dev);
+ pci_remove_bus_device(dev);
}
- dbg("ENABLING SLOT %s\n", slot->name);
- down(&rpaphp_sem);
- retval = rpaphp_enable_pci_slot(slot);
- up(&rpaphp_sem);
-exit:
- dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
- return retval;
+ slot->state = NOT_CONFIGURED;
+ return 0;
}
static int disable_slot(struct hotplug_slot *hotplug_slot)
{
- int retval = -EINVAL;
struct slot *slot = (struct slot *)hotplug_slot->private;
+ int retval;
- dbg("%s - Entry: slot[%s]\n", __FUNCTION__, slot->name);
-
- if (slot->state == NOT_CONFIGURED) {
- dbg("%s: %s is already disabled\n", __FUNCTION__, slot->name);
- goto exit;
- }
-
- dbg("DISABLING SLOT %s\n", slot->name);
down(&rpaphp_sem);
- retval = rpaphp_unconfig_pci_adapter(slot->bus);
+ retval = __disable_slot (slot);
up(&rpaphp_sem);
- slot->state = NOT_CONFIGURED;
- info("%s: devices in slot[%s] unconfigured.\n", __FUNCTION__,
- slot->name);
-exit:
- dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
+
return retval;
}
+struct hotplug_slot_ops rpaphp_hotplug_slot_ops = {
+ .owner = THIS_MODULE,
+ .enable_slot = enable_slot,
+ .disable_slot = disable_slot,
+ .set_attention_status = set_attention_status,
+ .get_power_status = get_power_status,
+ .get_attention_status = get_attention_status,
+ .get_adapter_status = get_adapter_status,
+ .get_max_bus_speed = get_max_bus_speed,
+};
+
module_init(rpaphp_init);
module_exit(rpaphp_exit);
EXPORT_SYMBOL_GPL(rpaphp_add_slot);
-EXPORT_SYMBOL_GPL(rpaphp_remove_slot);
EXPORT_SYMBOL_GPL(rpaphp_slot_head);
EXPORT_SYMBOL_GPL(rpaphp_get_drc_props);
diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c
index 396b54b..6f6cbed 100644
--- a/drivers/pci/hotplug/rpaphp_pci.c
+++ b/drivers/pci/hotplug/rpaphp_pci.c
@@ -32,37 +32,7 @@
#include "../pci.h" /* for pci_add_new_bus */
#include "rpaphp.h"
-static struct pci_bus *find_bus_among_children(struct pci_bus *bus,
- struct device_node *dn)
-{
- struct pci_bus *child = NULL;
- struct list_head *tmp;
- struct device_node *busdn;
-
- busdn = pci_bus_to_OF_node(bus);
- if (busdn == dn)
- return bus;
-
- list_for_each(tmp, &bus->children) {
- child = find_bus_among_children(pci_bus_b(tmp), dn);
- if (child)
- break;
- }
- return child;
-}
-
-struct pci_bus *rpaphp_find_pci_bus(struct device_node *dn)
-{
- struct pci_dn *pdn = dn->data;
-
- if (!pdn || !pdn->phb || !pdn->phb->bus)
- return NULL;
-
- return find_bus_among_children(pdn->phb->bus, dn);
-}
-EXPORT_SYMBOL_GPL(rpaphp_find_pci_bus);
-
-static int rpaphp_get_sensor_state(struct slot *slot, int *state)
+int rpaphp_get_sensor_state(struct slot *slot, int *state)
{
int rc;
int setlevel;
@@ -120,7 +90,7 @@
/* config/unconfig adapter */
*value = slot->state;
} else {
- bus = rpaphp_find_pci_bus(slot->dn);
+ bus = pcibios_find_pci_bus(slot->dn);
if (bus && !list_empty(&bus->devices))
*value = CONFIGURED;
else
@@ -131,140 +101,6 @@
return rc;
}
-/* Must be called before pci_bus_add_devices */
-void rpaphp_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- /*
- * Skip already-present devices (which are on the
- * global device list.)
- */
- if (list_empty(&dev->global_list)) {
- int i;
-
- /* Need to setup IOMMU tables */
- ppc_md.iommu_dev_setup(dev);
-
- if(fix_bus)
- pcibios_fixup_device_resources(dev, bus);
- pci_read_irq_line(dev);
- for (i = 0; i < PCI_NUM_RESOURCES; i++) {
- struct resource *r = &dev->resource[i];
-
- if (r->parent || !r->start || !r->flags)
- continue;
- pci_claim_resource(dev, i);
- }
- }
- }
-}
-
-static void rpaphp_eeh_add_bus_device(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- eeh_add_device_late(dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- struct pci_bus *subbus = dev->subordinate;
- if (subbus)
- rpaphp_eeh_add_bus_device (subbus);
- }
- }
-}
-
-static int rpaphp_pci_config_bridge(struct pci_dev *dev)
-{
- u8 sec_busno;
- struct pci_bus *child_bus;
- struct pci_dev *child_dev;
-
- dbg("Enter %s: BRIDGE dev=%s\n", __FUNCTION__, pci_name(dev));
-
- /* get busno of downstream bus */
- pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno);
-
- /* add to children of PCI bridge dev->bus */
- child_bus = pci_add_new_bus(dev->bus, dev, sec_busno);
- if (!child_bus) {
- err("%s: could not add second bus\n", __FUNCTION__);
- return -EIO;
- }
- sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number);
- /* do pci_scan_child_bus */
- pci_scan_child_bus(child_bus);
-
- list_for_each_entry(child_dev, &child_bus->devices, bus_list) {
- eeh_add_device_late(child_dev);
- }
-
- /* fixup new pci devices without touching bus struct */
- rpaphp_fixup_new_pci_devices(child_bus, 0);
-
- /* Make the discovered devices available */
- pci_bus_add_devices(child_bus);
- return 0;
-}
-
-void rpaphp_init_new_devs(struct pci_bus *bus)
-{
- rpaphp_fixup_new_pci_devices(bus, 0);
- rpaphp_eeh_add_bus_device(bus);
-}
-EXPORT_SYMBOL_GPL(rpaphp_init_new_devs);
-
-/*****************************************************************************
- rpaphp_pci_config_slot() will configure all devices under the
- given slot->dn and return the the first pci_dev.
- *****************************************************************************/
-static struct pci_dev *
-rpaphp_pci_config_slot(struct pci_bus *bus)
-{
- struct device_node *dn = pci_bus_to_OF_node(bus);
- struct pci_dev *dev = NULL;
- int slotno;
- int num;
-
- dbg("Enter %s: dn=%s bus=%s\n", __FUNCTION__, dn->full_name, bus->name);
- if (!dn || !dn->child)
- return NULL;
-
- if (_machine == PLATFORM_PSERIES_LPAR) {
- of_scan_bus(dn, bus);
- if (list_empty(&bus->devices)) {
- err("%s: No new device found\n", __FUNCTION__);
- return NULL;
- }
-
- rpaphp_init_new_devs(bus);
- pci_bus_add_devices(bus);
- dev = list_entry(&bus->devices, struct pci_dev, bus_list);
- } else {
- slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
-
- /* pci_scan_slot should find all children */
- num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
- if (num) {
- rpaphp_fixup_new_pci_devices(bus, 1);
- pci_bus_add_devices(bus);
- }
- if (list_empty(&bus->devices)) {
- err("%s: No new device found\n", __FUNCTION__);
- return NULL;
- }
- list_for_each_entry(dev, &bus->devices, bus_list) {
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
- rpaphp_pci_config_bridge(dev);
-
- rpaphp_eeh_add_bus_device(bus);
- }
- }
-
- return dev;
-}
-
static void print_slot_pci_funcs(struct pci_bus *bus)
{
struct device_node *dn;
@@ -280,60 +116,6 @@
return;
}
-int rpaphp_config_pci_adapter(struct pci_bus *bus)
-{
- struct device_node *dn = pci_bus_to_OF_node(bus);
- struct pci_dev *dev;
- int rc = -ENODEV;
-
- dbg("Entry %s: slot[%s]\n", __FUNCTION__, dn->full_name);
- if (!dn)
- goto exit;
-
- eeh_add_device_tree_early(dn);
- dev = rpaphp_pci_config_slot(bus);
- if (!dev) {
- err("%s: can't find any devices.\n", __FUNCTION__);
- goto exit;
- }
- print_slot_pci_funcs(bus);
- rc = 0;
-exit:
- dbg("Exit %s: rc=%d\n", __FUNCTION__, rc);
- return rc;
-}
-EXPORT_SYMBOL_GPL(rpaphp_config_pci_adapter);
-
-static void rpaphp_eeh_remove_bus_device(struct pci_dev *dev)
-{
- eeh_remove_device(dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- struct pci_bus *bus = dev->subordinate;
- struct list_head *ln;
- if (!bus)
- return;
- for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
- struct pci_dev *pdev = pci_dev_b(ln);
- if (pdev)
- rpaphp_eeh_remove_bus_device(pdev);
- }
-
- }
- return;
-}
-
-int rpaphp_unconfig_pci_adapter(struct pci_bus *bus)
-{
- struct pci_dev *dev, *tmp;
-
- list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
- rpaphp_eeh_remove_bus_device(dev);
- pci_remove_bus_device(dev);
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(rpaphp_unconfig_pci_adapter);
-
static int setup_pci_hotplug_slot_info(struct slot *slot)
{
struct hotplug_slot_info *hotplug_slot_info = slot->hotplug_slot->info;
@@ -370,7 +152,7 @@
struct pci_bus *bus;
BUG_ON(!dn);
- bus = rpaphp_find_pci_bus(dn);
+ bus = pcibios_find_pci_bus(dn);
if (!bus) {
err("%s: no pci_bus for dn %s\n", __FUNCTION__, dn->full_name);
goto exit_rc;
@@ -395,10 +177,7 @@
if (slot->hotplug_slot->info->adapter_status == NOT_CONFIGURED) {
dbg("%s CONFIGURING pci adapter in slot[%s]\n",
__FUNCTION__, slot->name);
- if (rpaphp_config_pci_adapter(slot->bus)) {
- err("%s: CONFIG pci adapter failed\n", __FUNCTION__);
- goto exit_rc;
- }
+ pcibios_add_pci_devices(slot->bus);
} else if (slot->hotplug_slot->info->adapter_status != CONFIGURED) {
err("%s: slot[%s]'s adapter_status is NOT_VALID.\n",
@@ -420,7 +199,7 @@
return -EINVAL;
}
-int register_pci_slot(struct slot *slot)
+int rpaphp_register_pci_slot(struct slot *slot)
{
int rc = -EINVAL;
@@ -428,42 +207,8 @@
goto exit_rc;
if (setup_pci_slot(slot))
goto exit_rc;
- rc = register_slot(slot);
+ rc = rpaphp_register_slot(slot);
exit_rc:
return rc;
}
-int rpaphp_enable_pci_slot(struct slot *slot)
-{
- int retval = 0, state;
-
- retval = rpaphp_get_sensor_state(slot, &state);
- if (retval)
- goto exit;
- dbg("%s: sensor state[%d]\n", __FUNCTION__, state);
- /* if slot is not empty, enable the adapter */
- if (state == PRESENT) {
- dbg("%s : slot[%s] is occupied.\n", __FUNCTION__, slot->name);
- retval = rpaphp_config_pci_adapter(slot->bus);
- if (!retval) {
- slot->state = CONFIGURED;
- info("%s: devices in slot[%s] configured\n",
- __FUNCTION__, slot->name);
- } else {
- slot->state = NOT_CONFIGURED;
- dbg("%s: no pci_dev struct for adapter in slot[%s]\n",
- __FUNCTION__, slot->name);
- }
- } else if (state == EMPTY) {
- dbg("%s : slot[%s] is empty\n", __FUNCTION__, slot->name);
- slot->state = EMPTY;
- } else {
- err("%s: slot[%s] is in invalid state\n", __FUNCTION__,
- slot->name);
- slot->state = NOT_VALID;
- retval = -EINVAL;
- }
-exit:
- dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
- return retval;
-}
diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c
index daa89ae..78943e0 100644
--- a/drivers/pci/hotplug/rpaphp_slot.c
+++ b/drivers/pci/hotplug/rpaphp_slot.c
@@ -35,16 +35,16 @@
static ssize_t location_read_file (struct hotplug_slot *php_slot, char *buf)
{
- char *value;
- int retval = -ENOENT;
+ char *value;
+ int retval = -ENOENT;
struct slot *slot = (struct slot *)php_slot->private;
if (!slot)
return retval;
- value = slot->location;
- retval = sprintf (buf, "%s\n", value);
- return retval;
+ value = slot->location;
+ retval = sprintf (buf, "%s\n", value);
+ return retval;
}
static struct hotplug_slot_attribute hotplug_slot_attr_location = {
@@ -137,7 +137,7 @@
return 0;
}
-int deregister_slot(struct slot *slot)
+int rpaphp_deregister_slot(struct slot *slot)
{
int retval = 0;
struct hotplug_slot *php_slot = slot->hotplug_slot;
@@ -159,8 +159,9 @@
dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
return retval;
}
+EXPORT_SYMBOL_GPL(rpaphp_deregister_slot);
-int register_slot(struct slot *slot)
+int rpaphp_register_slot(struct slot *slot)
{
int retval;
@@ -169,7 +170,7 @@
slot->power_domain, slot->type);
/* should not try to register the same slot twice */
if (is_registered(slot)) { /* should't be here */
- err("register_slot: slot[%s] is already registered\n", slot->name);
+ err("rpaphp_register_slot: slot[%s] is already registered\n", slot->name);
rpaphp_release_slot(slot->hotplug_slot);
return -EAGAIN;
}
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index ce0e9b6..7d6f521 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -95,6 +95,7 @@
u8 function;
u8 slot_device_offset;
u8 add_support;
+ u32 pcix_misc2_reg; /* for amd pogo errata */
enum pci_bus_speed speed;
u32 first_slot; /* First physical slot number */
u8 slot_bus; /* Bus where the slots handled by this controller sit */
@@ -113,6 +114,26 @@
/* Define AMD SHPC ID */
#define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450
+#define PCI_DEVICE_ID_AMD_POGO_7458 0x7458
+
+/* AMD PCIX bridge registers */
+
+#define PCIX_MEM_BASE_LIMIT_OFFSET 0x1C
+#define PCIX_MISCII_OFFSET 0x48
+#define PCIX_MISC_BRIDGE_ERRORS_OFFSET 0x80
+
+/* AMD PCIX_MISCII masks and offsets */
+#define PERRNONFATALENABLE_MASK 0x00040000
+#define PERRFATALENABLE_MASK 0x00080000
+#define PERRFLOODENABLE_MASK 0x00100000
+#define SERRNONFATALENABLE_MASK 0x00200000
+#define SERRFATALENABLE_MASK 0x00400000
+
+/* AMD PCIX_MISC_BRIDGE_ERRORS masks and offsets */
+#define PERR_OBSERVED_MASK 0x00000001
+
+/* AMD PCIX_MEM_BASE_LIMIT masks */
+#define RSE_MASK 0x40000000
#define INT_BUTTON_IGNORE 0
#define INT_PRESENCE_ON 1
@@ -333,6 +354,79 @@
return retval;
}
+static inline void amd_pogo_errata_save_misc_reg(struct slot *p_slot)
+{
+ u32 pcix_misc2_temp;
+
+ /* save MiscII register */
+ pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, &pcix_misc2_temp);
+
+ p_slot->ctrl->pcix_misc2_reg = pcix_misc2_temp;
+
+ /* clear SERR/PERR enable bits */
+ pcix_misc2_temp &= ~SERRFATALENABLE_MASK;
+ pcix_misc2_temp &= ~SERRNONFATALENABLE_MASK;
+ pcix_misc2_temp &= ~PERRFLOODENABLE_MASK;
+ pcix_misc2_temp &= ~PERRFATALENABLE_MASK;
+ pcix_misc2_temp &= ~PERRNONFATALENABLE_MASK;
+ pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, pcix_misc2_temp);
+}
+
+static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot)
+{
+ u32 pcix_misc2_temp;
+ u32 pcix_bridge_errors_reg;
+ u32 pcix_mem_base_reg;
+ u8 perr_set;
+ u8 rse_set;
+
+ /* write-one-to-clear Bridge_Errors[ PERR_OBSERVED ] */
+ pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, &pcix_bridge_errors_reg);
+ perr_set = pcix_bridge_errors_reg & PERR_OBSERVED_MASK;
+ if (perr_set) {
+ dbg ("%s W1C: Bridge_Errors[ PERR_OBSERVED = %08X]\n",__FUNCTION__ , perr_set);
+
+ pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, perr_set);
+ }
+
+ /* write-one-to-clear Memory_Base_Limit[ RSE ] */
+ pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, &pcix_mem_base_reg);
+ rse_set = pcix_mem_base_reg & RSE_MASK;
+ if (rse_set) {
+ dbg ("%s W1C: Memory_Base_Limit[ RSE ]\n",__FUNCTION__ );
+
+ pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, rse_set);
+ }
+ /* restore MiscII register */
+ pci_read_config_dword( p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, &pcix_misc2_temp );
+
+ if (p_slot->ctrl->pcix_misc2_reg & SERRFATALENABLE_MASK)
+ pcix_misc2_temp |= SERRFATALENABLE_MASK;
+ else
+ pcix_misc2_temp &= ~SERRFATALENABLE_MASK;
+
+ if (p_slot->ctrl->pcix_misc2_reg & SERRNONFATALENABLE_MASK)
+ pcix_misc2_temp |= SERRNONFATALENABLE_MASK;
+ else
+ pcix_misc2_temp &= ~SERRNONFATALENABLE_MASK;
+
+ if (p_slot->ctrl->pcix_misc2_reg & PERRFLOODENABLE_MASK)
+ pcix_misc2_temp |= PERRFLOODENABLE_MASK;
+ else
+ pcix_misc2_temp &= ~PERRFLOODENABLE_MASK;
+
+ if (p_slot->ctrl->pcix_misc2_reg & PERRFATALENABLE_MASK)
+ pcix_misc2_temp |= PERRFATALENABLE_MASK;
+ else
+ pcix_misc2_temp &= ~PERRFATALENABLE_MASK;
+
+ if (p_slot->ctrl->pcix_misc2_reg & PERRNONFATALENABLE_MASK)
+ pcix_misc2_temp |= PERRNONFATALENABLE_MASK;
+ else
+ pcix_misc2_temp &= ~PERRNONFATALENABLE_MASK;
+ pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, pcix_misc2_temp);
+}
+
#define SLOT_NAME_SIZE 10
static inline void make_slot_name(char *buffer, int buffer_size, struct slot *slot)
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index 25ccb0e..643252d 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -894,7 +894,17 @@
dbg("%s: p_slot->pwr_save %x\n", __FUNCTION__, p_slot->pwr_save);
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
- rc = board_added(p_slot);
+ if(((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) ||
+ (p_slot->ctrl->pci_dev->device == PCI_DEVICE_ID_AMD_POGO_7458))
+ && p_slot->ctrl->num_slots == 1) {
+ /* handle amd pogo errata; this must be done before enable */
+ amd_pogo_errata_save_misc_reg(p_slot);
+ rc = board_added(p_slot);
+ /* handle amd pogo errata; this must be done after enable */
+ amd_pogo_errata_restore_misc_reg(p_slot);
+ } else
+ rc = board_added(p_slot);
+
if (rc) {
p_slot->hpc_ops->get_adapter_status(p_slot,
&(p_slot->presence_save));
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 202b750..48723d6 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -137,6 +137,8 @@
break;
}
}
+#else
+#define set_msi_affinity NULL
#endif /* CONFIG_SMP */
static void mask_MSI_irq(unsigned int vector)
@@ -214,7 +216,7 @@
.disable = mask_MSI_irq,
.ack = mask_MSI_irq,
.end = end_msi_irq_w_maskbit,
- .set_affinity = set_msi_irq_affinity
+ .set_affinity = set_msi_affinity
};
/*
@@ -230,7 +232,7 @@
.disable = mask_MSI_irq,
.ack = mask_MSI_irq,
.end = end_msi_irq_w_maskbit,
- .set_affinity = set_msi_irq_affinity
+ .set_affinity = set_msi_affinity
};
/*
@@ -246,7 +248,7 @@
.disable = do_nothing,
.ack = do_nothing,
.end = end_msi_irq_wo_maskbit,
- .set_affinity = set_msi_irq_affinity
+ .set_affinity = set_msi_affinity
};
static void msi_data_init(struct msg_data *msi_data,
@@ -416,7 +418,9 @@
static void irq_handler_init(int cap_id, int pos, int mask)
{
- spin_lock(&irq_desc[pos].lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&irq_desc[pos].lock, flags);
if (cap_id == PCI_CAP_ID_MSIX)
irq_desc[pos].handler = &msix_irq_type;
else {
@@ -425,7 +429,7 @@
else
irq_desc[pos].handler = &msi_irq_w_maskbit_type;
}
- spin_unlock(&irq_desc[pos].lock);
+ spin_unlock_irqrestore(&irq_desc[pos].lock, flags);
}
static void enable_msi_mode(struct pci_dev *dev, int pos, int type)
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index 402136a..4ac52d4 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -22,12 +22,6 @@
extern void (*interrupt[NR_IRQS])(void);
extern int pci_vector_resources(int last, int nr_released);
-#ifdef CONFIG_SMP
-#define set_msi_irq_affinity set_msi_affinity
-#else
-#define set_msi_irq_affinity NULL
-#endif
-
/*
* MSI-X Address Register
*/
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d2a633e..d2d1879 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -163,6 +163,7 @@
return __pci_bus_find_cap(bus, devfn, hdr_type & 0x7f, cap);
}
+#if 0
/**
* pci_find_ext_capability - Find an extended capability
* @dev: PCI device to query
@@ -210,6 +211,7 @@
return 0;
}
+#endif /* 0 */
/**
* pci_find_parent_resource - return resource region of parent bus of given region
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 50d6685..ea9277b 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -112,6 +112,7 @@
return err;
}
+EXPORT_SYMBOL_GPL(pci_claim_resource);
int pci_assign_resource(struct pci_dev *dev, int resno)
{
diff --git a/drivers/pnp/card.c b/drivers/pnp/card.c
index 0ecbe4e..aaa568a 100644
--- a/drivers/pnp/card.c
+++ b/drivers/pnp/card.c
@@ -363,7 +363,7 @@
int pnp_register_card_driver(struct pnp_card_driver * drv)
{
- int count = 0;
+ int count;
struct list_head *pos, *temp;
drv->link.name = drv->name;
@@ -374,10 +374,15 @@
drv->link.suspend = drv->suspend ? card_suspend : NULL;
drv->link.resume = drv->resume ? card_resume : NULL;
+ count = pnp_register_driver(&drv->link);
+ if (count < 0)
+ return count;
+
spin_lock(&pnp_lock);
list_add_tail(&drv->global_list, &pnp_card_drivers);
spin_unlock(&pnp_lock);
- pnp_register_driver(&drv->link);
+
+ count = 0;
list_for_each_safe(pos,temp,&pnp_cards){
struct pnp_card *card = list_entry(pos, struct pnp_card, global_list);
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index 816479a..f104577 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -27,12 +27,15 @@
static int num = 0;
+/* We need only to blacklist devices that have already an acpi driver that
+ * can't use pnp layer. We don't need to blacklist device that are directly
+ * used by the kernel (PCI root, ...), as it is harmless and there were
+ * already present in pnpbios. But there is an exception for devices that
+ * have irqs (PIC, Timer) because we call acpi_register_gsi.
+ * Finaly only devices that have a CRS method need to be in this list.
+ */
static char __initdata excluded_id_list[] =
- "PNP0C0A," /* Battery */
- "PNP0C0C,PNP0C0E,PNP0C0D," /* Button */
"PNP0C09," /* EC */
- "PNP0C0B," /* Fan */
- "PNP0A03," /* PCI root */
"PNP0C0F," /* Link device */
"PNP0000," /* PIC */
"PNP0100," /* Timer */
@@ -131,7 +134,8 @@
struct pnp_id *dev_id;
struct pnp_dev *dev;
- if (!ispnpidacpi(acpi_device_hid(device)) ||
+ status = acpi_get_handle(device->handle, "_CRS", &temp);
+ if (ACPI_FAILURE(status) || !ispnpidacpi(acpi_device_hid(device)) ||
is_exclusive_device(device))
return 0;
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 416d30d..407b4ea 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -3,7 +3,7 @@
*
* Copyright (c) 2004 Matthieu Castet <castet.matthieu@free.fr>
* Copyright (c) 2004 Li Shaohua <shaohua.li@intel.com>
- *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
@@ -32,17 +32,17 @@
/*
* Allocated Resources
*/
-static int irq_flags(int edge_level, int active_high_low)
+static int irq_flags(int triggering, int polarity)
{
int flag;
- if (edge_level == ACPI_LEVEL_SENSITIVE) {
- if(active_high_low == ACPI_ACTIVE_LOW)
+ if (triggering == ACPI_LEVEL_SENSITIVE) {
+ if(polarity == ACPI_ACTIVE_LOW)
flag = IORESOURCE_IRQ_LOWLEVEL;
else
flag = IORESOURCE_IRQ_HIGHLEVEL;
}
else {
- if(active_high_low == ACPI_ACTIVE_LOW)
+ if(polarity == ACPI_ACTIVE_LOW)
flag = IORESOURCE_IRQ_LOWEDGE;
else
flag = IORESOURCE_IRQ_HIGHEDGE;
@@ -50,31 +50,31 @@
return flag;
}
-static void decode_irq_flags(int flag, int *edge_level, int *active_high_low)
+static void decode_irq_flags(int flag, int *triggering, int *polarity)
{
switch (flag) {
case IORESOURCE_IRQ_LOWLEVEL:
- *edge_level = ACPI_LEVEL_SENSITIVE;
- *active_high_low = ACPI_ACTIVE_LOW;
+ *triggering = ACPI_LEVEL_SENSITIVE;
+ *polarity = ACPI_ACTIVE_LOW;
break;
case IORESOURCE_IRQ_HIGHLEVEL:
- *edge_level = ACPI_LEVEL_SENSITIVE;
- *active_high_low = ACPI_ACTIVE_HIGH;
+ *triggering = ACPI_LEVEL_SENSITIVE;
+ *polarity = ACPI_ACTIVE_HIGH;
break;
case IORESOURCE_IRQ_LOWEDGE:
- *edge_level = ACPI_EDGE_SENSITIVE;
- *active_high_low = ACPI_ACTIVE_LOW;
+ *triggering = ACPI_EDGE_SENSITIVE;
+ *polarity = ACPI_ACTIVE_LOW;
break;
case IORESOURCE_IRQ_HIGHEDGE:
- *edge_level = ACPI_EDGE_SENSITIVE;
- *active_high_low = ACPI_ACTIVE_HIGH;
+ *triggering = ACPI_EDGE_SENSITIVE;
+ *polarity = ACPI_ACTIVE_HIGH;
break;
}
}
static void
pnpacpi_parse_allocated_irqresource(struct pnp_resource_table * res, u32 gsi,
- int edge_level, int active_high_low)
+ int triggering, int polarity)
{
int i = 0;
int irq;
@@ -89,7 +89,7 @@
return;
res->irq_resource[i].flags = IORESOURCE_IRQ; // Also clears _UNSET flag
- irq = acpi_register_gsi(gsi, edge_level, active_high_low);
+ irq = acpi_register_gsi(gsi, triggering, polarity);
if (irq < 0) {
res->irq_resource[i].flags |= IORESOURCE_DISABLED;
return;
@@ -163,77 +163,96 @@
struct pnp_resource_table * res_table = (struct pnp_resource_table *)data;
int i;
- switch (res->id) {
- case ACPI_RSTYPE_IRQ:
+ switch (res->type) {
+ case ACPI_RESOURCE_TYPE_IRQ:
/*
* Per spec, only one interrupt per descriptor is allowed in
* _CRS, but some firmware violates this, so parse them all.
*/
- for (i = 0; i < res->data.irq.number_of_interrupts; i++) {
+ for (i = 0; i < res->data.irq.interrupt_count; i++) {
pnpacpi_parse_allocated_irqresource(res_table,
res->data.irq.interrupts[i],
- res->data.irq.edge_level,
- res->data.irq.active_high_low);
+ res->data.irq.triggering,
+ res->data.irq.polarity);
}
break;
- case ACPI_RSTYPE_EXT_IRQ:
- for (i = 0; i < res->data.extended_irq.number_of_interrupts; i++) {
- pnpacpi_parse_allocated_irqresource(res_table,
- res->data.extended_irq.interrupts[i],
- res->data.extended_irq.edge_level,
- res->data.extended_irq.active_high_low);
- }
- break;
- case ACPI_RSTYPE_DMA:
- if (res->data.dma.number_of_channels > 0)
- pnpacpi_parse_allocated_dmaresource(res_table,
+ case ACPI_RESOURCE_TYPE_DMA:
+ if (res->data.dma.channel_count > 0)
+ pnpacpi_parse_allocated_dmaresource(res_table,
res->data.dma.channels[0]);
break;
- case ACPI_RSTYPE_IO:
- pnpacpi_parse_allocated_ioresource(res_table,
- res->data.io.min_base_address,
- res->data.io.range_length);
+
+ case ACPI_RESOURCE_TYPE_IO:
+ pnpacpi_parse_allocated_ioresource(res_table,
+ res->data.io.minimum,
+ res->data.io.address_length);
break;
- case ACPI_RSTYPE_FIXED_IO:
- pnpacpi_parse_allocated_ioresource(res_table,
- res->data.fixed_io.base_address,
- res->data.fixed_io.range_length);
+
+ case ACPI_RESOURCE_TYPE_START_DEPENDENT:
+ case ACPI_RESOURCE_TYPE_END_DEPENDENT:
break;
- case ACPI_RSTYPE_MEM24:
- pnpacpi_parse_allocated_memresource(res_table,
- res->data.memory24.min_base_address,
- res->data.memory24.range_length);
+
+ case ACPI_RESOURCE_TYPE_FIXED_IO:
+ pnpacpi_parse_allocated_ioresource(res_table,
+ res->data.fixed_io.address,
+ res->data.fixed_io.address_length);
break;
- case ACPI_RSTYPE_MEM32:
- pnpacpi_parse_allocated_memresource(res_table,
- res->data.memory32.min_base_address,
- res->data.memory32.range_length);
+
+ case ACPI_RESOURCE_TYPE_VENDOR:
break;
- case ACPI_RSTYPE_FIXED_MEM32:
- pnpacpi_parse_allocated_memresource(res_table,
- res->data.fixed_memory32.range_base_address,
- res->data.fixed_memory32.range_length);
+
+ case ACPI_RESOURCE_TYPE_END_TAG:
break;
- case ACPI_RSTYPE_ADDRESS16:
- pnpacpi_parse_allocated_memresource(res_table,
- res->data.address16.min_address_range,
+
+ case ACPI_RESOURCE_TYPE_MEMORY24:
+ pnpacpi_parse_allocated_memresource(res_table,
+ res->data.memory24.minimum,
+ res->data.memory24.address_length);
+ break;
+ case ACPI_RESOURCE_TYPE_MEMORY32:
+ pnpacpi_parse_allocated_memresource(res_table,
+ res->data.memory32.minimum,
+ res->data.memory32.address_length);
+ break;
+ case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
+ pnpacpi_parse_allocated_memresource(res_table,
+ res->data.fixed_memory32.address,
+ res->data.fixed_memory32.address_length);
+ break;
+ case ACPI_RESOURCE_TYPE_ADDRESS16:
+ pnpacpi_parse_allocated_memresource(res_table,
+ res->data.address16.minimum,
res->data.address16.address_length);
break;
- case ACPI_RSTYPE_ADDRESS32:
- pnpacpi_parse_allocated_memresource(res_table,
- res->data.address32.min_address_range,
+ case ACPI_RESOURCE_TYPE_ADDRESS32:
+ pnpacpi_parse_allocated_memresource(res_table,
+ res->data.address32.minimum,
res->data.address32.address_length);
break;
- case ACPI_RSTYPE_ADDRESS64:
- pnpacpi_parse_allocated_memresource(res_table,
- res->data.address64.min_address_range,
+ case ACPI_RESOURCE_TYPE_ADDRESS64:
+ pnpacpi_parse_allocated_memresource(res_table,
+ res->data.address64.minimum,
res->data.address64.address_length);
break;
- case ACPI_RSTYPE_VENDOR:
+
+ case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
break;
+
+ case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+ for (i = 0; i < res->data.extended_irq.interrupt_count; i++) {
+ pnpacpi_parse_allocated_irqresource(res_table,
+ res->data.extended_irq.interrupts[i],
+ res->data.extended_irq.triggering,
+ res->data.extended_irq.polarity);
+ }
+ break;
+
+ case ACPI_RESOURCE_TYPE_GENERIC_REGISTER:
+ break;
+
default:
- pnp_warn("PnPACPI: unknown resource type %d", res->id);
+ pnp_warn("PnPACPI: unknown resource type %d", res->type);
return AE_ERROR;
}
@@ -253,13 +272,13 @@
int i;
struct pnp_dma * dma;
- if (p->number_of_channels == 0)
+ if (p->channel_count == 0)
return;
dma = kcalloc(1, sizeof(struct pnp_dma), GFP_KERNEL);
if (!dma)
return;
- for(i = 0; i < p->number_of_channels; i++)
+ for(i = 0; i < p->channel_count; i++)
dma->map |= 1 << p->channels[i];
dma->flags = 0;
if (p->bus_master)
@@ -309,37 +328,37 @@
int i;
struct pnp_irq * irq;
- if (p->number_of_interrupts == 0)
+ if (p->interrupt_count == 0)
return;
irq = kcalloc(1, sizeof(struct pnp_irq), GFP_KERNEL);
if (!irq)
return;
- for(i = 0; i < p->number_of_interrupts; i++)
+ for(i = 0; i < p->interrupt_count; i++)
if (p->interrupts[i])
__set_bit(p->interrupts[i], irq->map);
- irq->flags = irq_flags(p->edge_level, p->active_high_low);
+ irq->flags = irq_flags(p->triggering, p->polarity);
pnp_register_irq_resource(option, irq);
return;
}
static void pnpacpi_parse_ext_irq_option(struct pnp_option *option,
- struct acpi_resource_ext_irq *p)
+ struct acpi_resource_extended_irq *p)
{
int i;
struct pnp_irq * irq;
- if (p->number_of_interrupts == 0)
+ if (p->interrupt_count == 0)
return;
irq = kcalloc(1, sizeof(struct pnp_irq), GFP_KERNEL);
if (!irq)
return;
- for(i = 0; i < p->number_of_interrupts; i++)
+ for(i = 0; i < p->interrupt_count; i++)
if (p->interrupts[i])
__set_bit(p->interrupts[i], irq->map);
- irq->flags = irq_flags(p->edge_level, p->active_high_low);
+ irq->flags = irq_flags(p->triggering, p->polarity);
pnp_register_irq_resource(option, irq);
return;
@@ -351,16 +370,16 @@
{
struct pnp_port * port;
- if (io->range_length == 0)
+ if (io->address_length == 0)
return;
port = kcalloc(1, sizeof(struct pnp_port), GFP_KERNEL);
if (!port)
return;
- port->min = io->min_base_address;
- port->max = io->max_base_address;
+ port->min = io->minimum;
+ port->max = io->maximum;
port->align = io->alignment;
- port->size = io->range_length;
- port->flags = ACPI_DECODE_16 == io->io_decode ?
+ port->size = io->address_length;
+ port->flags = ACPI_DECODE_16 == io->io_decode ?
PNP_PORT_FLAG_16BITADDR : 0;
pnp_register_port_resource(option,port);
return;
@@ -372,13 +391,13 @@
{
struct pnp_port * port;
- if (io->range_length == 0)
+ if (io->address_length == 0)
return;
port = kcalloc(1, sizeof(struct pnp_port), GFP_KERNEL);
if (!port)
return;
- port->min = port->max = io->base_address;
- port->size = io->range_length;
+ port->min = port->max = io->address;
+ port->size = io->address_length;
port->align = 0;
port->flags = PNP_PORT_FLAG_FIXED;
pnp_register_port_resource(option,port);
@@ -387,21 +406,21 @@
static void
pnpacpi_parse_mem24_option(struct pnp_option *option,
- struct acpi_resource_mem24 *p)
+ struct acpi_resource_memory24 *p)
{
struct pnp_mem * mem;
- if (p->range_length == 0)
+ if (p->address_length == 0)
return;
mem = kcalloc(1, sizeof(struct pnp_mem), GFP_KERNEL);
if (!mem)
return;
- mem->min = p->min_base_address;
- mem->max = p->max_base_address;
+ mem->min = p->minimum;
+ mem->max = p->maximum;
mem->align = p->alignment;
- mem->size = p->range_length;
+ mem->size = p->address_length;
- mem->flags = (ACPI_READ_WRITE_MEMORY == p->read_write_attribute) ?
+ mem->flags = (ACPI_READ_WRITE_MEMORY == p->write_protect) ?
IORESOURCE_MEM_WRITEABLE : 0;
pnp_register_mem_resource(option,mem);
@@ -410,21 +429,21 @@
static void
pnpacpi_parse_mem32_option(struct pnp_option *option,
- struct acpi_resource_mem32 *p)
+ struct acpi_resource_memory32 *p)
{
struct pnp_mem * mem;
- if (p->range_length == 0)
+ if (p->address_length == 0)
return;
mem = kcalloc(1, sizeof(struct pnp_mem), GFP_KERNEL);
if (!mem)
return;
- mem->min = p->min_base_address;
- mem->max = p->max_base_address;
+ mem->min = p->minimum;
+ mem->max = p->maximum;
mem->align = p->alignment;
- mem->size = p->range_length;
+ mem->size = p->address_length;
- mem->flags = (ACPI_READ_WRITE_MEMORY == p->read_write_attribute) ?
+ mem->flags = (ACPI_READ_WRITE_MEMORY == p->write_protect) ?
IORESOURCE_MEM_WRITEABLE : 0;
pnp_register_mem_resource(option,mem);
@@ -433,33 +452,72 @@
static void
pnpacpi_parse_fixed_mem32_option(struct pnp_option *option,
- struct acpi_resource_fixed_mem32 *p)
+ struct acpi_resource_fixed_memory32 *p)
{
struct pnp_mem * mem;
- if (p->range_length == 0)
+ if (p->address_length == 0)
return;
mem = kcalloc(1, sizeof(struct pnp_mem), GFP_KERNEL);
if (!mem)
return;
- mem->min = mem->max = p->range_base_address;
- mem->size = p->range_length;
+ mem->min = mem->max = p->address;
+ mem->size = p->address_length;
mem->align = 0;
- mem->flags = (ACPI_READ_WRITE_MEMORY == p->read_write_attribute) ?
+ mem->flags = (ACPI_READ_WRITE_MEMORY == p->write_protect) ?
IORESOURCE_MEM_WRITEABLE : 0;
pnp_register_mem_resource(option,mem);
return;
}
+static void
+pnpacpi_parse_address_option(struct pnp_option *option, struct acpi_resource *r)
+{
+ struct acpi_resource_address64 addr, *p = &addr;
+ acpi_status status;
+ struct pnp_mem * mem;
+ struct pnp_port * port;
+
+ status = acpi_resource_to_address64(r, p);
+ if (!ACPI_SUCCESS(status)) {
+ pnp_warn("PnPACPI: failed to convert resource type %d", r->type);
+ return;
+ }
+
+ if (p->address_length == 0)
+ return;
+
+ if (p->resource_type == ACPI_MEMORY_RANGE) {
+ mem = kcalloc(1, sizeof(struct pnp_mem), GFP_KERNEL);
+ if (!mem)
+ return;
+ mem->min = mem->max = p->minimum;
+ mem->size = p->address_length;
+ mem->align = 0;
+ mem->flags = (p->info.mem.write_protect ==
+ ACPI_READ_WRITE_MEMORY) ? IORESOURCE_MEM_WRITEABLE : 0;
+ pnp_register_mem_resource(option,mem);
+ } else if (p->resource_type == ACPI_IO_RANGE) {
+ port = kcalloc(1, sizeof(struct pnp_port), GFP_KERNEL);
+ if (!port)
+ return;
+ port->min = port->max = p->minimum;
+ port->size = p->address_length;
+ port->align = 0;
+ port->flags = PNP_PORT_FLAG_FIXED;
+ pnp_register_port_resource(option,port);
+ }
+}
+
struct acpipnp_parse_option_s {
struct pnp_option *option;
struct pnp_option *option_independent;
struct pnp_dev *dev;
};
-static acpi_status pnpacpi_option_resource(struct acpi_resource *res,
+static acpi_status pnpacpi_option_resource(struct acpi_resource *res,
void *data)
{
int priority = 0;
@@ -467,35 +525,16 @@
struct pnp_dev *dev = parse_data->dev;
struct pnp_option *option = parse_data->option;
- switch (res->id) {
- case ACPI_RSTYPE_IRQ:
+ switch (res->type) {
+ case ACPI_RESOURCE_TYPE_IRQ:
pnpacpi_parse_irq_option(option, &res->data.irq);
break;
- case ACPI_RSTYPE_EXT_IRQ:
- pnpacpi_parse_ext_irq_option(option,
- &res->data.extended_irq);
- break;
- case ACPI_RSTYPE_DMA:
+
+ case ACPI_RESOURCE_TYPE_DMA:
pnpacpi_parse_dma_option(option, &res->data.dma);
break;
- case ACPI_RSTYPE_IO:
- pnpacpi_parse_port_option(option, &res->data.io);
- break;
- case ACPI_RSTYPE_FIXED_IO:
- pnpacpi_parse_fixed_port_option(option,
- &res->data.fixed_io);
- break;
- case ACPI_RSTYPE_MEM24:
- pnpacpi_parse_mem24_option(option, &res->data.memory24);
- break;
- case ACPI_RSTYPE_MEM32:
- pnpacpi_parse_mem32_option(option, &res->data.memory32);
- break;
- case ACPI_RSTYPE_FIXED_MEM32:
- pnpacpi_parse_fixed_mem32_option(option,
- &res->data.fixed_memory32);
- break;
- case ACPI_RSTYPE_START_DPF:
+
+ case ACPI_RESOURCE_TYPE_START_DEPENDENT:
switch (res->data.start_dpf.compatibility_priority) {
case ACPI_GOOD_CONFIGURATION:
priority = PNP_RES_PRIORITY_PREFERRED;
@@ -518,7 +557,8 @@
return AE_ERROR;
parse_data->option = option;
break;
- case ACPI_RSTYPE_END_DPF:
+
+ case ACPI_RESOURCE_TYPE_END_DEPENDENT:
/*only one EndDependentFn is allowed*/
if (!parse_data->option_independent) {
pnp_warn("PnPACPI: more than one EndDependentFn");
@@ -527,15 +567,59 @@
parse_data->option = parse_data->option_independent;
parse_data->option_independent = NULL;
break;
+
+ case ACPI_RESOURCE_TYPE_IO:
+ pnpacpi_parse_port_option(option, &res->data.io);
+ break;
+
+ case ACPI_RESOURCE_TYPE_FIXED_IO:
+ pnpacpi_parse_fixed_port_option(option,
+ &res->data.fixed_io);
+ break;
+
+ case ACPI_RESOURCE_TYPE_VENDOR:
+ case ACPI_RESOURCE_TYPE_END_TAG:
+ break;
+
+ case ACPI_RESOURCE_TYPE_MEMORY24:
+ pnpacpi_parse_mem24_option(option, &res->data.memory24);
+ break;
+
+ case ACPI_RESOURCE_TYPE_MEMORY32:
+ pnpacpi_parse_mem32_option(option, &res->data.memory32);
+ break;
+
+ case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
+ pnpacpi_parse_fixed_mem32_option(option,
+ &res->data.fixed_memory32);
+ break;
+
+ case ACPI_RESOURCE_TYPE_ADDRESS16:
+ case ACPI_RESOURCE_TYPE_ADDRESS32:
+ case ACPI_RESOURCE_TYPE_ADDRESS64:
+ pnpacpi_parse_address_option(option, res);
+ break;
+
+ case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
+ break;
+
+ case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+ pnpacpi_parse_ext_irq_option(option,
+ &res->data.extended_irq);
+ break;
+
+ case ACPI_RESOURCE_TYPE_GENERIC_REGISTER:
+ break;
+
default:
- pnp_warn("PnPACPI: unknown resource type %d", res->id);
+ pnp_warn("PnPACPI: unknown resource type %d", res->type);
return AE_ERROR;
}
return AE_OK;
}
-acpi_status pnpacpi_parse_resource_option_data(acpi_handle handle,
+acpi_status pnpacpi_parse_resource_option_data(acpi_handle handle,
struct pnp_dev *dev)
{
acpi_status status;
@@ -546,7 +630,7 @@
return AE_ERROR;
parse_data.option_independent = parse_data.option;
parse_data.dev = dev;
- status = acpi_walk_resources(handle, METHOD_NAME__PRS,
+ status = acpi_walk_resources(handle, METHOD_NAME__PRS,
pnpacpi_option_resource, &parse_data);
return status;
@@ -559,21 +643,24 @@
void *data)
{
int *res_cnt = (int *)data;
- switch (res->id) {
- case ACPI_RSTYPE_IRQ:
- case ACPI_RSTYPE_EXT_IRQ:
- case ACPI_RSTYPE_DMA:
- case ACPI_RSTYPE_IO:
- case ACPI_RSTYPE_FIXED_IO:
- case ACPI_RSTYPE_MEM24:
- case ACPI_RSTYPE_MEM32:
- case ACPI_RSTYPE_FIXED_MEM32:
-#if 0
- case ACPI_RSTYPE_ADDRESS16:
- case ACPI_RSTYPE_ADDRESS32:
- case ACPI_RSTYPE_ADDRESS64:
-#endif
+ switch (res->type) {
+ case ACPI_RESOURCE_TYPE_IRQ:
+ case ACPI_RESOURCE_TYPE_DMA:
+ case ACPI_RESOURCE_TYPE_IO:
+ case ACPI_RESOURCE_TYPE_FIXED_IO:
+ case ACPI_RESOURCE_TYPE_MEMORY24:
+ case ACPI_RESOURCE_TYPE_MEMORY32:
+ case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
+ case ACPI_RESOURCE_TYPE_ADDRESS16:
+ case ACPI_RESOURCE_TYPE_ADDRESS32:
+ case ACPI_RESOURCE_TYPE_ADDRESS64:
+ case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
(*res_cnt) ++;
+ case ACPI_RESOURCE_TYPE_START_DEPENDENT:
+ case ACPI_RESOURCE_TYPE_END_DEPENDENT:
+ case ACPI_RESOURCE_TYPE_VENDOR:
+ case ACPI_RESOURCE_TYPE_END_TAG:
+ case ACPI_RESOURCE_TYPE_GENERIC_REGISTER:
default:
return AE_OK;
}
@@ -584,22 +671,25 @@
void *data)
{
struct acpi_resource **resource = (struct acpi_resource **)data;
- switch (res->id) {
- case ACPI_RSTYPE_IRQ:
- case ACPI_RSTYPE_EXT_IRQ:
- case ACPI_RSTYPE_DMA:
- case ACPI_RSTYPE_IO:
- case ACPI_RSTYPE_FIXED_IO:
- case ACPI_RSTYPE_MEM24:
- case ACPI_RSTYPE_MEM32:
- case ACPI_RSTYPE_FIXED_MEM32:
-#if 0
- case ACPI_RSTYPE_ADDRESS16:
- case ACPI_RSTYPE_ADDRESS32:
- case ACPI_RSTYPE_ADDRESS64:
-#endif
- (*resource)->id = res->id;
+ switch (res->type) {
+ case ACPI_RESOURCE_TYPE_IRQ:
+ case ACPI_RESOURCE_TYPE_DMA:
+ case ACPI_RESOURCE_TYPE_IO:
+ case ACPI_RESOURCE_TYPE_FIXED_IO:
+ case ACPI_RESOURCE_TYPE_MEMORY24:
+ case ACPI_RESOURCE_TYPE_MEMORY32:
+ case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
+ case ACPI_RESOURCE_TYPE_ADDRESS16:
+ case ACPI_RESOURCE_TYPE_ADDRESS32:
+ case ACPI_RESOURCE_TYPE_ADDRESS64:
+ case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+ (*resource)->type = res->type;
(*resource)++;
+ case ACPI_RESOURCE_TYPE_START_DEPENDENT:
+ case ACPI_RESOURCE_TYPE_END_DEPENDENT:
+ case ACPI_RESOURCE_TYPE_VENDOR:
+ case ACPI_RESOURCE_TYPE_END_TAG:
+ case ACPI_RESOURCE_TYPE_GENERIC_REGISTER:
default:
return AE_OK;
}
@@ -607,14 +697,14 @@
return AE_OK;
}
-int pnpacpi_build_resource_template(acpi_handle handle,
+int pnpacpi_build_resource_template(acpi_handle handle,
struct acpi_buffer *buffer)
{
struct acpi_resource *resource;
int res_cnt = 0;
acpi_status status;
- status = acpi_walk_resources(handle, METHOD_NAME__CRS,
+ status = acpi_walk_resources(handle, METHOD_NAME__CRS,
pnpacpi_count_resources, &res_cnt);
if (ACPI_FAILURE(status)) {
pnp_err("Evaluate _CRS failed");
@@ -628,7 +718,7 @@
return -ENOMEM;
pnp_dbg("Res cnt %d", res_cnt);
resource = (struct acpi_resource *)buffer->pointer;
- status = acpi_walk_resources(handle, METHOD_NAME__CRS,
+ status = acpi_walk_resources(handle, METHOD_NAME__CRS,
pnpacpi_type_resources, &resource);
if (ACPI_FAILURE(status)) {
kfree(buffer->pointer);
@@ -636,54 +726,54 @@
return -EINVAL;
}
/* resource will pointer the end resource now */
- resource->id = ACPI_RSTYPE_END_TAG;
+ resource->type = ACPI_RESOURCE_TYPE_END_TAG;
return 0;
}
-static void pnpacpi_encode_irq(struct acpi_resource *resource,
+static void pnpacpi_encode_irq(struct acpi_resource *resource,
struct resource *p)
{
- int edge_level, active_high_low;
+ int triggering, polarity;
- decode_irq_flags(p->flags & IORESOURCE_BITS, &edge_level,
- &active_high_low);
- resource->id = ACPI_RSTYPE_IRQ;
+ decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering,
+ &polarity);
+ resource->type = ACPI_RESOURCE_TYPE_IRQ;
resource->length = sizeof(struct acpi_resource);
- resource->data.irq.edge_level = edge_level;
- resource->data.irq.active_high_low = active_high_low;
- if (edge_level == ACPI_EDGE_SENSITIVE)
- resource->data.irq.shared_exclusive = ACPI_EXCLUSIVE;
+ resource->data.irq.triggering = triggering;
+ resource->data.irq.polarity = polarity;
+ if (triggering == ACPI_EDGE_SENSITIVE)
+ resource->data.irq.sharable = ACPI_EXCLUSIVE;
else
- resource->data.irq.shared_exclusive = ACPI_SHARED;
- resource->data.irq.number_of_interrupts = 1;
+ resource->data.irq.sharable = ACPI_SHARED;
+ resource->data.irq.interrupt_count = 1;
resource->data.irq.interrupts[0] = p->start;
}
static void pnpacpi_encode_ext_irq(struct acpi_resource *resource,
struct resource *p)
{
- int edge_level, active_high_low;
+ int triggering, polarity;
- decode_irq_flags(p->flags & IORESOURCE_BITS, &edge_level,
- &active_high_low);
- resource->id = ACPI_RSTYPE_EXT_IRQ;
+ decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering,
+ &polarity);
+ resource->type = ACPI_RESOURCE_TYPE_EXTENDED_IRQ;
resource->length = sizeof(struct acpi_resource);
resource->data.extended_irq.producer_consumer = ACPI_CONSUMER;
- resource->data.extended_irq.edge_level = edge_level;
- resource->data.extended_irq.active_high_low = active_high_low;
- if (edge_level == ACPI_EDGE_SENSITIVE)
- resource->data.irq.shared_exclusive = ACPI_EXCLUSIVE;
+ resource->data.extended_irq.triggering = triggering;
+ resource->data.extended_irq.polarity = polarity;
+ if (triggering == ACPI_EDGE_SENSITIVE)
+ resource->data.irq.sharable = ACPI_EXCLUSIVE;
else
- resource->data.irq.shared_exclusive = ACPI_SHARED;
- resource->data.extended_irq.number_of_interrupts = 1;
+ resource->data.irq.sharable = ACPI_SHARED;
+ resource->data.extended_irq.interrupt_count = 1;
resource->data.extended_irq.interrupts[0] = p->start;
}
static void pnpacpi_encode_dma(struct acpi_resource *resource,
struct resource *p)
{
- resource->id = ACPI_RSTYPE_DMA;
+ resource->type = ACPI_RESOURCE_TYPE_DMA;
resource->length = sizeof(struct acpi_resource);
/* Note: pnp_assign_dma will copy pnp_dma->flags into p->flags */
if (p->flags & IORESOURCE_DMA_COMPATIBLE)
@@ -701,75 +791,75 @@
else if (p->flags & IORESOURCE_DMA_16BIT)
resource->data.dma.transfer = ACPI_TRANSFER_16;
resource->data.dma.bus_master = p->flags & IORESOURCE_DMA_MASTER;
- resource->data.dma.number_of_channels = 1;
+ resource->data.dma.channel_count = 1;
resource->data.dma.channels[0] = p->start;
}
static void pnpacpi_encode_io(struct acpi_resource *resource,
struct resource *p)
{
- resource->id = ACPI_RSTYPE_IO;
+ resource->type = ACPI_RESOURCE_TYPE_IO;
resource->length = sizeof(struct acpi_resource);
/* Note: pnp_assign_port will copy pnp_port->flags into p->flags */
resource->data.io.io_decode = (p->flags & PNP_PORT_FLAG_16BITADDR)?
- ACPI_DECODE_16 : ACPI_DECODE_10;
- resource->data.io.min_base_address = p->start;
- resource->data.io.max_base_address = p->end;
+ ACPI_DECODE_16 : ACPI_DECODE_10;
+ resource->data.io.minimum = p->start;
+ resource->data.io.maximum = p->end;
resource->data.io.alignment = 0; /* Correct? */
- resource->data.io.range_length = p->end - p->start + 1;
+ resource->data.io.address_length = p->end - p->start + 1;
}
static void pnpacpi_encode_fixed_io(struct acpi_resource *resource,
struct resource *p)
{
- resource->id = ACPI_RSTYPE_FIXED_IO;
+ resource->type = ACPI_RESOURCE_TYPE_FIXED_IO;
resource->length = sizeof(struct acpi_resource);
- resource->data.fixed_io.base_address = p->start;
- resource->data.fixed_io.range_length = p->end - p->start + 1;
+ resource->data.fixed_io.address = p->start;
+ resource->data.fixed_io.address_length = p->end - p->start + 1;
}
static void pnpacpi_encode_mem24(struct acpi_resource *resource,
struct resource *p)
{
- resource->id = ACPI_RSTYPE_MEM24;
+ resource->type = ACPI_RESOURCE_TYPE_MEMORY24;
resource->length = sizeof(struct acpi_resource);
/* Note: pnp_assign_mem will copy pnp_mem->flags into p->flags */
- resource->data.memory24.read_write_attribute =
+ resource->data.memory24.write_protect =
(p->flags & IORESOURCE_MEM_WRITEABLE) ?
ACPI_READ_WRITE_MEMORY : ACPI_READ_ONLY_MEMORY;
- resource->data.memory24.min_base_address = p->start;
- resource->data.memory24.max_base_address = p->end;
+ resource->data.memory24.minimum = p->start;
+ resource->data.memory24.maximum = p->end;
resource->data.memory24.alignment = 0;
- resource->data.memory24.range_length = p->end - p->start + 1;
+ resource->data.memory24.address_length = p->end - p->start + 1;
}
static void pnpacpi_encode_mem32(struct acpi_resource *resource,
struct resource *p)
{
- resource->id = ACPI_RSTYPE_MEM32;
+ resource->type = ACPI_RESOURCE_TYPE_MEMORY32;
resource->length = sizeof(struct acpi_resource);
- resource->data.memory32.read_write_attribute =
+ resource->data.memory32.write_protect =
(p->flags & IORESOURCE_MEM_WRITEABLE) ?
ACPI_READ_WRITE_MEMORY : ACPI_READ_ONLY_MEMORY;
- resource->data.memory32.min_base_address = p->start;
- resource->data.memory32.max_base_address = p->end;
+ resource->data.memory32.minimum = p->start;
+ resource->data.memory32.maximum = p->end;
resource->data.memory32.alignment = 0;
- resource->data.memory32.range_length = p->end - p->start + 1;
+ resource->data.memory32.address_length = p->end - p->start + 1;
}
static void pnpacpi_encode_fixed_mem32(struct acpi_resource *resource,
struct resource *p)
{
- resource->id = ACPI_RSTYPE_FIXED_MEM32;
+ resource->type = ACPI_RESOURCE_TYPE_FIXED_MEMORY32;
resource->length = sizeof(struct acpi_resource);
- resource->data.fixed_memory32.read_write_attribute =
+ resource->data.fixed_memory32.write_protect =
(p->flags & IORESOURCE_MEM_WRITEABLE) ?
ACPI_READ_WRITE_MEMORY : ACPI_READ_ONLY_MEMORY;
- resource->data.fixed_memory32.range_base_address = p->start;
- resource->data.fixed_memory32.range_length = p->end - p->start + 1;
+ resource->data.fixed_memory32.address = p->start;
+ resource->data.fixed_memory32.address_length = p->end - p->start + 1;
}
-int pnpacpi_encode_resources(struct pnp_resource_table *res_table,
+int pnpacpi_encode_resources(struct pnp_resource_table *res_table,
struct acpi_buffer *buffer)
{
int i = 0;
@@ -780,58 +870,67 @@
pnp_dbg("res cnt %d", res_cnt);
while (i < res_cnt) {
- switch(resource->id) {
- case ACPI_RSTYPE_IRQ:
+ switch(resource->type) {
+ case ACPI_RESOURCE_TYPE_IRQ:
pnp_dbg("Encode irq");
- pnpacpi_encode_irq(resource,
+ pnpacpi_encode_irq(resource,
&res_table->irq_resource[irq]);
irq++;
break;
- case ACPI_RSTYPE_EXT_IRQ:
- pnp_dbg("Encode ext irq");
- pnpacpi_encode_ext_irq(resource,
- &res_table->irq_resource[irq]);
- irq++;
- break;
- case ACPI_RSTYPE_DMA:
+ case ACPI_RESOURCE_TYPE_DMA:
pnp_dbg("Encode dma");
- pnpacpi_encode_dma(resource,
+ pnpacpi_encode_dma(resource,
&res_table->dma_resource[dma]);
dma ++;
break;
- case ACPI_RSTYPE_IO:
+ case ACPI_RESOURCE_TYPE_IO:
pnp_dbg("Encode io");
- pnpacpi_encode_io(resource,
+ pnpacpi_encode_io(resource,
&res_table->port_resource[port]);
port ++;
break;
- case ACPI_RSTYPE_FIXED_IO:
+ case ACPI_RESOURCE_TYPE_FIXED_IO:
pnp_dbg("Encode fixed io");
pnpacpi_encode_fixed_io(resource,
&res_table->port_resource[port]);
port ++;
break;
- case ACPI_RSTYPE_MEM24:
+ case ACPI_RESOURCE_TYPE_MEMORY24:
pnp_dbg("Encode mem24");
pnpacpi_encode_mem24(resource,
&res_table->mem_resource[mem]);
mem ++;
break;
- case ACPI_RSTYPE_MEM32:
+ case ACPI_RESOURCE_TYPE_MEMORY32:
pnp_dbg("Encode mem32");
pnpacpi_encode_mem32(resource,
&res_table->mem_resource[mem]);
mem ++;
break;
- case ACPI_RSTYPE_FIXED_MEM32:
+ case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
pnp_dbg("Encode fixed mem32");
pnpacpi_encode_fixed_mem32(resource,
&res_table->mem_resource[mem]);
mem ++;
break;
+ case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+ pnp_dbg("Encode ext irq");
+ pnpacpi_encode_ext_irq(resource,
+ &res_table->irq_resource[irq]);
+ irq++;
+ break;
+ case ACPI_RESOURCE_TYPE_START_DEPENDENT:
+ case ACPI_RESOURCE_TYPE_END_DEPENDENT:
+ case ACPI_RESOURCE_TYPE_VENDOR:
+ case ACPI_RESOURCE_TYPE_END_TAG:
+ case ACPI_RESOURCE_TYPE_ADDRESS16:
+ case ACPI_RESOURCE_TYPE_ADDRESS32:
+ case ACPI_RESOURCE_TYPE_ADDRESS64:
+ case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
+ case ACPI_RESOURCE_TYPE_GENERIC_REGISTER:
default: /* other type */
- pnp_warn("unknown resource type %d", resource->id);
+ pnp_warn("unknown resource type %d", resource->type);
return -EINVAL;
}
resource ++;
diff --git a/drivers/s390/Kconfig b/drivers/s390/Kconfig
index a86a650..721787c 100644
--- a/drivers/s390/Kconfig
+++ b/drivers/s390/Kconfig
@@ -51,6 +51,13 @@
When not in use, each additional set of 256 PTYs occupy
approximately 8 KB of kernel memory on 32-bit architectures.
+config HANGCHECK_TIMER
+ tristate "Hangcheck timer"
+ help
+ The hangcheck-timer module detects when the system has gone
+ out to lunch past a certain margin. It can reboot the system
+ or merely print a warning.
+
source "drivers/char/watchdog/Kconfig"
comment "S/390 character device drivers"
diff --git a/drivers/s390/block/Kconfig b/drivers/s390/block/Kconfig
index 6f50cc9..6912399 100644
--- a/drivers/s390/block/Kconfig
+++ b/drivers/s390/block/Kconfig
@@ -55,13 +55,21 @@
Disks under VM. If you are not running under VM or unsure what it is,
say "N".
+config DASD_EER
+ tristate "Extended error reporting (EER)"
+ depends on DASD
+ help
+ This driver provides a character device interface to the
+ DASD extended error reporting. This is only needed if you want to
+ use applications written for the EER facility.
+
config DASD_CMB
tristate "Compatibility interface for DASD channel measurement blocks"
depends on DASD
help
- This driver provides an additional interface to the channel measurement
- facility, which is normally accessed though sysfs, with a set of
- ioctl functions specific to the dasd driver.
+ This driver provides an additional interface to the channel
+ measurement facility, which is normally accessed though sysfs, with
+ a set of ioctl functions specific to the dasd driver.
This is only needed if you want to use applications written for
linux-2.4 dasd channel measurement facility interface.
diff --git a/drivers/s390/block/Makefile b/drivers/s390/block/Makefile
index 58c6780..0c0d871 100644
--- a/drivers/s390/block/Makefile
+++ b/drivers/s390/block/Makefile
@@ -5,6 +5,7 @@
dasd_eckd_mod-objs := dasd_eckd.o dasd_3990_erp.o dasd_9343_erp.o
dasd_fba_mod-objs := dasd_fba.o dasd_3370_erp.o dasd_9336_erp.o
dasd_diag_mod-objs := dasd_diag.o
+dasd_eer_mod-objs := dasd_eer.o
dasd_mod-objs := dasd.o dasd_ioctl.o dasd_proc.o dasd_devmap.o \
dasd_genhd.o dasd_erp.o
@@ -13,5 +14,6 @@
obj-$(CONFIG_DASD_ECKD) += dasd_eckd_mod.o
obj-$(CONFIG_DASD_FBA) += dasd_fba_mod.o
obj-$(CONFIG_DASD_CMB) += dasd_cmb.o
+obj-$(CONFIG_DASD_EER) += dasd_eer.o
obj-$(CONFIG_BLK_DEV_XPRAM) += xpram.o
obj-$(CONFIG_DCSSBLK) += dcssblk.o
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index ef4c687..08c88fc 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -7,7 +7,6 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999-2001
*
- * $Revision: 1.172 $
*/
#include <linux/config.h>
@@ -19,6 +18,7 @@
#include <linux/slab.h>
#include <linux/buffer_head.h>
#include <linux/hdreg.h>
+#include <linux/notifier.h>
#include <asm/ccwdev.h>
#include <asm/ebcdic.h>
@@ -58,6 +58,7 @@
static void dasd_flush_ccw_queue(struct dasd_device *, int);
static void dasd_tasklet(struct dasd_device *);
static void do_kick_device(void *data);
+static void dasd_disable_eer(struct dasd_device *device);
/*
* SECTION: Operations on the device structure.
@@ -152,6 +153,8 @@
static inline void
dasd_state_known_to_new(struct dasd_device * device)
{
+ /* disable extended error reporting for this device */
+ dasd_disable_eer(device);
/* Forget the discipline information. */
device->discipline = NULL;
device->state = DASD_STATE_NEW;
@@ -675,11 +678,8 @@
rc = ccw_device_clear(device->cdev, (long) cqr);
switch (rc) {
case 0: /* termination successful */
- if (cqr->retries > 0) {
- cqr->retries--;
- cqr->status = DASD_CQR_CLEAR;
- } else
- cqr->status = DASD_CQR_FAILED;
+ cqr->retries--;
+ cqr->status = DASD_CQR_CLEAR;
cqr->stopclk = get_clock();
DBF_DEV_EVENT(DBF_DEBUG, device,
"terminate cqr %p successful",
@@ -871,6 +871,9 @@
struct dasd_ccw_req *cqr;
struct list_head *l, *n;
+ /* first of all call extended error reporting */
+ dasd_write_eer_trigger(DASD_EER_STATECHANGE, device, NULL);
+
device->stopped &= ~DASD_STOPPED_PENDING;
/* restart all 'running' IO on queue */
@@ -1090,6 +1093,19 @@
}
goto restart;
}
+
+ /* first of all call extended error reporting */
+ if (device->eer && cqr->status == DASD_CQR_FAILED) {
+ dasd_write_eer_trigger(DASD_EER_FATALERROR,
+ device, cqr);
+
+ /* restart request */
+ cqr->status = DASD_CQR_QUEUED;
+ cqr->retries = 255;
+ device->stopped |= DASD_STOPPED_QUIESCE;
+ goto restart;
+ }
+
/* Process finished ERP request. */
if (cqr->refers) {
__dasd_process_erp(device, cqr);
@@ -1227,7 +1243,8 @@
cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, list);
/* check FAILFAST */
if (device->stopped & ~DASD_STOPPED_PENDING &&
- test_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags)) {
+ test_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags) &&
+ (!device->eer)) {
cqr->status = DASD_CQR_FAILED;
dasd_schedule_bh(device);
}
@@ -1308,7 +1325,7 @@
/* Now call the callback function of requests with final status */
list_for_each_safe(l, n, &final_queue) {
cqr = list_entry(l, struct dasd_ccw_req, list);
- list_del(&cqr->list);
+ list_del_init(&cqr->list);
if (cqr->callback != NULL)
(cqr->callback)(cqr, cqr->callback_data);
}
@@ -1393,7 +1410,9 @@
device = cqr->device;
spin_lock_irq(get_ccwdev_lock(device->cdev));
- rc = cqr->status == DASD_CQR_DONE || cqr->status == DASD_CQR_FAILED;
+ rc = ((cqr->status == DASD_CQR_DONE ||
+ cqr->status == DASD_CQR_FAILED) &&
+ list_empty(&cqr->list));
spin_unlock_irq(get_ccwdev_lock(device->cdev));
return rc;
}
@@ -1457,15 +1476,37 @@
while (!finished) {
rc = wait_event_interruptible(wait_q, _wait_for_wakeup(cqr));
if (rc != -ERESTARTSYS) {
- /* Request status is either done or failed. */
- rc = (cqr->status == DASD_CQR_FAILED) ? -EIO : 0;
+ /* Request is final (done or failed) */
+ rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
break;
}
spin_lock_irq(get_ccwdev_lock(device->cdev));
- if (cqr->status == DASD_CQR_IN_IO &&
- device->discipline->term_IO(cqr) == 0) {
- list_del(&cqr->list);
+ switch (cqr->status) {
+ case DASD_CQR_IN_IO:
+ /* terminate runnig cqr */
+ if (device->discipline->term_IO) {
+ cqr->retries = -1;
+ device->discipline->term_IO(cqr);
+ /*nished =
+ * wait (non-interruptible) for final status
+ * because signal ist still pending
+ */
+ spin_unlock_irq(get_ccwdev_lock(device->cdev));
+ wait_event(wait_q, _wait_for_wakeup(cqr));
+ spin_lock_irq(get_ccwdev_lock(device->cdev));
+ rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
+ finished = 1;
+ }
+ break;
+ case DASD_CQR_QUEUED:
+ /* request */
+ list_del_init(&cqr->list);
+ rc = -EIO;
finished = 1;
+ break;
+ default:
+ /* cqr with 'non-interruptable' status - just wait */
+ break;
}
spin_unlock_irq(get_ccwdev_lock(device->cdev));
}
@@ -1945,6 +1986,9 @@
switch (event) {
case CIO_GONE:
case CIO_NO_PATH:
+ /* first of all call extended error reporting */
+ dasd_write_eer_trigger(DASD_EER_NOPATH, device, NULL);
+
if (device->state < DASD_STATE_BASIC)
break;
/* Device is active. We want to keep it. */
@@ -2002,6 +2046,51 @@
put_driver(drv);
}
+/*
+ * notifications for extended error reports
+ */
+static struct notifier_block *dasd_eer_chain;
+
+int
+dasd_register_eer_notifier(struct notifier_block *nb)
+{
+ return notifier_chain_register(&dasd_eer_chain, nb);
+}
+
+int
+dasd_unregister_eer_notifier(struct notifier_block *nb)
+{
+ return notifier_chain_unregister(&dasd_eer_chain, nb);
+}
+
+/*
+ * Notify the registered error reporting module of a problem
+ */
+void
+dasd_write_eer_trigger(unsigned int id, struct dasd_device *device,
+ struct dasd_ccw_req *cqr)
+{
+ if (device->eer) {
+ struct dasd_eer_trigger temp;
+ temp.id = id;
+ temp.device = device;
+ temp.cqr = cqr;
+ notifier_call_chain(&dasd_eer_chain, DASD_EER_TRIGGER,
+ (void *)&temp);
+ }
+}
+
+/*
+ * Tell the registered error reporting module to disable error reporting for
+ * a given device and to cleanup any private data structures on that device.
+ */
+static void
+dasd_disable_eer(struct dasd_device *device)
+{
+ notifier_call_chain(&dasd_eer_chain, DASD_EER_DISABLE, (void *)device);
+}
+
+
static int __init
dasd_init(void)
{
@@ -2083,6 +2172,11 @@
EXPORT_SYMBOL_GPL(dasd_generic_set_offline);
EXPORT_SYMBOL_GPL(dasd_generic_auto_online);
+EXPORT_SYMBOL(dasd_register_eer_notifier);
+EXPORT_SYMBOL(dasd_unregister_eer_notifier);
+EXPORT_SYMBOL(dasd_write_eer_trigger);
+
+
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* Emacs will notice this stuff at the end of the file and automatically
diff --git a/drivers/s390/block/dasd_3370_erp.c b/drivers/s390/block/dasd_3370_erp.c
index 84565c8..1d11c2a 100644
--- a/drivers/s390/block/dasd_3370_erp.c
+++ b/drivers/s390/block/dasd_3370_erp.c
@@ -4,7 +4,6 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000
*
- * $Revision: 1.9 $
*/
#define PRINTK_HEADER "dasd_erp(3370)"
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index c143ecb..c811380 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -5,7 +5,6 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000, 2001
*
- * $Revision: 1.36 $
*/
#include <linux/timer.h>
@@ -1109,6 +1108,9 @@
case 0x0B:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT F - Volume is suspended duplex");
+ /* call extended error reporting (EER) */
+ dasd_write_eer_trigger(DASD_EER_PPRCSUSPEND, device,
+ erp->refers);
break;
case 0x0C:
DEV_MESSAGE(KERN_WARNING, device, "%s",
diff --git a/drivers/s390/block/dasd_9336_erp.c b/drivers/s390/block/dasd_9336_erp.c
index 01e8717..dc86144 100644
--- a/drivers/s390/block/dasd_9336_erp.c
+++ b/drivers/s390/block/dasd_9336_erp.c
@@ -4,7 +4,6 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000
*
- * $Revision: 1.8 $
*/
#define PRINTK_HEADER "dasd_erp(9336)"
diff --git a/drivers/s390/block/dasd_9343_erp.c b/drivers/s390/block/dasd_9343_erp.c
index 2a23b74..4a5b795 100644
--- a/drivers/s390/block/dasd_9343_erp.c
+++ b/drivers/s390/block/dasd_9343_erp.c
@@ -4,7 +4,6 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000
*
- * $Revision: 1.13 $
*/
#define PRINTK_HEADER "dasd_erp(9343)"
diff --git a/drivers/s390/block/dasd_cmb.c b/drivers/s390/block/dasd_cmb.c
index 4f365bf..e88f73e 100644
--- a/drivers/s390/block/dasd_cmb.c
+++ b/drivers/s390/block/dasd_cmb.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/s390/block/dasd_cmb.c ($Revision: 1.9 $)
- *
* Linux on zSeries Channel Measurement Facility support
* (dasd device driver interface)
*
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index caee16a..1629b27 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -11,7 +11,6 @@
* functions may not be called from interrupt context. In particular
* dasd_get_device is a no-no from interrupt context.
*
- * $Revision: 1.43 $
*/
#include <linux/config.h>
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index ba80fde..3f9d704 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -6,7 +6,6 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
*
- * $Revision: 1.53 $
*/
#include <linux/config.h>
diff --git a/drivers/s390/block/dasd_diag.h b/drivers/s390/block/dasd_diag.h
index a4f80bd..38a4e55 100644
--- a/drivers/s390/block/dasd_diag.h
+++ b/drivers/s390/block/dasd_diag.h
@@ -6,7 +6,6 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
*
- * $Revision: 1.9 $
*/
#define MDSK_WRITE_REQ 0x01
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 96eb482..822e2a2 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -7,7 +7,6 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
*
- * $Revision: 1.74 $
*/
#include <linux/config.h>
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index b6888c6..e15dd79 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -5,7 +5,6 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
*
- * $Revision: 1.10 $
*/
#ifndef DASD_ECKD_H
@@ -30,6 +29,7 @@
#define DASD_ECKD_CCW_PSF 0x27
#define DASD_ECKD_CCW_RSSD 0x3e
#define DASD_ECKD_CCW_LOCATE_RECORD 0x47
+#define DASD_ECKD_CCW_SNSS 0x54
#define DASD_ECKD_CCW_DEFINE_EXTENT 0x63
#define DASD_ECKD_CCW_WRITE_MT 0x85
#define DASD_ECKD_CCW_READ_MT 0x86
diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c
new file mode 100644
index 0000000..f70cd77
--- /dev/null
+++ b/drivers/s390/block/dasd_eer.c
@@ -0,0 +1,1090 @@
+/*
+ * character device driver for extended error reporting
+ *
+ *
+ * Copyright (C) 2005 IBM Corporation
+ * extended error reporting for DASD ECKD devices
+ * Author(s): Stefan Weinhuber <wein@de.ibm.com>
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/workqueue.h>
+#include <linux/poll.h>
+#include <linux/notifier.h>
+
+#include <asm/uaccess.h>
+#include <asm/semaphore.h>
+#include <asm/atomic.h>
+#include <asm/ebcdic.h>
+
+#include "dasd_int.h"
+#include "dasd_eckd.h"
+
+
+MODULE_LICENSE("GPL");
+
+MODULE_AUTHOR("Stefan Weinhuber <wein@de.ibm.com>");
+MODULE_DESCRIPTION("DASD extended error reporting module");
+
+
+#ifdef PRINTK_HEADER
+#undef PRINTK_HEADER
+#endif /* PRINTK_HEADER */
+#define PRINTK_HEADER "dasd(eer):"
+
+
+
+
+
+/*****************************************************************************/
+/* the internal buffer */
+/*****************************************************************************/
+
+/*
+ * The internal buffer is meant to store obaque blobs of data, so it doesn't
+ * know of higher level concepts like triggers.
+ * It consists of a number of pages that are used as a ringbuffer. Each data
+ * blob is stored in a simple record that consists of an integer, which
+ * contains the size of the following data, and the data bytes themselfes.
+ *
+ * To allow for multiple independent readers we create one internal buffer
+ * each time the device is opened and destroy the buffer when the file is
+ * closed again.
+ *
+ * One record can be written to a buffer by using the functions
+ * - dasd_eer_start_record (one time per record to write the size to the buffer
+ * and reserve the space for the data)
+ * - dasd_eer_write_buffer (one or more times per record to write the data)
+ * The data can be written in several steps but you will have to compute
+ * the total size up front for the invocation of dasd_eer_start_record.
+ * If the ringbuffer is full, dasd_eer_start_record will remove the required
+ * number of old records.
+ *
+ * A record is typically read in two steps, first read the integer that
+ * specifies the size of the following data, then read the data.
+ * Both can be done by
+ * - dasd_eer_read_buffer
+ *
+ * For all mentioned functions you need to get the bufferlock first and keep it
+ * until a complete record is written or read.
+ */
+
+
+/*
+ * Alle information necessary to keep track of an internal buffer is kept in
+ * a struct eerbuffer. The buffer specific to a file pointer is strored in
+ * the private_data field of that file. To be able to write data to all
+ * existing buffers, each buffer is also added to the bufferlist.
+ * If the user doesn't want to read a complete record in one go, we have to
+ * keep track of the rest of the record. residual stores the number of bytes
+ * that are still to deliver. If the rest of the record is invalidated between
+ * two reads then residual will be set to -1 so that the next read will fail.
+ * All entries in the eerbuffer structure are protected with the bufferlock.
+ * To avoid races between writing to a buffer on the one side and creating
+ * and destroying buffers on the other side, the bufferlock must also be used
+ * to protect the bufferlist.
+ */
+
+struct eerbuffer {
+ struct list_head list;
+ char **buffer;
+ int buffersize;
+ int buffer_page_count;
+ int head;
+ int tail;
+ int residual;
+};
+
+LIST_HEAD(bufferlist);
+
+static spinlock_t bufferlock = SPIN_LOCK_UNLOCKED;
+
+DECLARE_WAIT_QUEUE_HEAD(dasd_eer_read_wait_queue);
+
+/*
+ * How many free bytes are available on the buffer.
+ * needs to be called with bufferlock held
+ */
+static int
+dasd_eer_get_free_bytes(struct eerbuffer *eerb)
+{
+ if (eerb->head < eerb->tail) {
+ return eerb->tail - eerb->head - 1;
+ } else
+ return eerb->buffersize - eerb->head + eerb->tail -1;
+}
+
+/*
+ * How many bytes of buffer space are used.
+ * needs to be called with bufferlock held
+ */
+static int
+dasd_eer_get_filled_bytes(struct eerbuffer *eerb)
+{
+
+ if (eerb->head >= eerb->tail) {
+ return eerb->head - eerb->tail;
+ } else
+ return eerb->buffersize - eerb->tail + eerb->head;
+}
+
+/*
+ * The dasd_eer_write_buffer function just copies count bytes of data
+ * to the buffer. Make sure to call dasd_eer_start_record first, to
+ * make sure that enough free space is available.
+ * needs to be called with bufferlock held
+ */
+static void
+dasd_eer_write_buffer(struct eerbuffer *eerb, int count, char *data)
+{
+
+ unsigned long headindex,localhead;
+ unsigned long rest, len;
+ char *nextdata;
+
+ nextdata = data;
+ rest = count;
+ while (rest > 0) {
+ headindex = eerb->head / PAGE_SIZE;
+ localhead = eerb->head % PAGE_SIZE;
+ len = min(rest, (PAGE_SIZE - localhead));
+ memcpy(eerb->buffer[headindex]+localhead, nextdata, len);
+ nextdata += len;
+ rest -= len;
+ eerb->head += len;
+ if ( eerb->head == eerb->buffersize )
+ eerb->head = 0; /* wrap around */
+ if (eerb->head > eerb->buffersize) {
+ MESSAGE(KERN_ERR, "%s", "runaway buffer head.");
+ BUG();
+ }
+ }
+}
+
+/*
+ * needs to be called with bufferlock held
+ */
+static int
+dasd_eer_read_buffer(struct eerbuffer *eerb, int count, char *data)
+{
+
+ unsigned long tailindex,localtail;
+ unsigned long rest, len, finalcount;
+ char *nextdata;
+
+ finalcount = min(count, dasd_eer_get_filled_bytes(eerb));
+ nextdata = data;
+ rest = finalcount;
+ while (rest > 0) {
+ tailindex = eerb->tail / PAGE_SIZE;
+ localtail = eerb->tail % PAGE_SIZE;
+ len = min(rest, (PAGE_SIZE - localtail));
+ memcpy(nextdata, eerb->buffer[tailindex]+localtail, len);
+ nextdata += len;
+ rest -= len;
+ eerb->tail += len;
+ if ( eerb->tail == eerb->buffersize )
+ eerb->tail = 0; /* wrap around */
+ if (eerb->tail > eerb->buffersize) {
+ MESSAGE(KERN_ERR, "%s", "runaway buffer tail.");
+ BUG();
+ }
+ }
+ return finalcount;
+}
+
+/*
+ * Whenever you want to write a blob of data to the internal buffer you
+ * have to start by using this function first. It will write the number
+ * of bytes that will be written to the buffer. If necessary it will remove
+ * old records to make room for the new one.
+ * needs to be called with bufferlock held
+ */
+static int
+dasd_eer_start_record(struct eerbuffer *eerb, int count)
+{
+ int tailcount;
+ if (count + sizeof(count) > eerb->buffersize)
+ return -ENOMEM;
+ while (dasd_eer_get_free_bytes(eerb) < count + sizeof(count)) {
+ if (eerb->residual > 0) {
+ eerb->tail += eerb->residual;
+ if (eerb->tail >= eerb->buffersize)
+ eerb->tail -= eerb->buffersize;
+ eerb->residual = -1;
+ }
+ dasd_eer_read_buffer(eerb, sizeof(tailcount),
+ (char*)(&tailcount));
+ eerb->tail += tailcount;
+ if (eerb->tail >= eerb->buffersize)
+ eerb->tail -= eerb->buffersize;
+ }
+ dasd_eer_write_buffer(eerb, sizeof(count), (char*)(&count));
+
+ return 0;
+};
+
+/*
+ * release pages that are not used anymore
+ */
+static void
+dasd_eer_free_buffer_pages(char **buf, int no_pages)
+{
+ int i;
+
+ for (i = 0; i < no_pages; ++i) {
+ free_page((unsigned long)buf[i]);
+ }
+}
+
+/*
+ * allocate a new set of memory pages
+ */
+static int
+dasd_eer_allocate_buffer_pages(char **buf, int no_pages)
+{
+ int i;
+
+ for (i = 0; i < no_pages; ++i) {
+ buf[i] = (char *) get_zeroed_page(GFP_KERNEL);
+ if (!buf[i]) {
+ dasd_eer_free_buffer_pages(buf, i);
+ return -ENOMEM;
+ }
+ }
+ return 0;
+}
+
+/*
+ * empty the buffer by resetting head and tail
+ * In case there is a half read data blob in the buffer, we set residual
+ * to -1 to indicate that the remainder of the blob is lost.
+ */
+static void
+dasd_eer_purge_buffer(struct eerbuffer *eerb)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&bufferlock, flags);
+ if (eerb->residual > 0)
+ eerb->residual = -1;
+ eerb->tail=0;
+ eerb->head=0;
+ spin_unlock_irqrestore(&bufferlock, flags);
+}
+
+/*
+ * set the size of the buffer, newsize is the new number of pages to be used
+ * we don't try to copy any data back an forth, so any resize will also purge
+ * the buffer
+ */
+static int
+dasd_eer_resize_buffer(struct eerbuffer *eerb, int newsize)
+{
+ int i, oldcount, reuse;
+ char **new;
+ char **old;
+ unsigned long flags;
+
+ if (newsize < 1)
+ return -EINVAL;
+ if (eerb->buffer_page_count == newsize) {
+ /* documented behaviour is that any successfull invocation
+ * will purge all records */
+ dasd_eer_purge_buffer(eerb);
+ return 0;
+ }
+ new = kmalloc(newsize*sizeof(char*), GFP_KERNEL);
+ if (!new)
+ return -ENOMEM;
+
+ reuse=min(eerb->buffer_page_count, newsize);
+ for (i = 0; i < reuse; ++i) {
+ new[i] = eerb->buffer[i];
+ }
+ if (eerb->buffer_page_count < newsize) {
+ if (dasd_eer_allocate_buffer_pages(
+ &new[eerb->buffer_page_count],
+ newsize - eerb->buffer_page_count)) {
+ kfree(new);
+ return -ENOMEM;
+ }
+ }
+
+ spin_lock_irqsave(&bufferlock, flags);
+ old = eerb->buffer;
+ eerb->buffer = new;
+ if (eerb->residual > 0)
+ eerb->residual = -1;
+ eerb->tail = 0;
+ eerb->head = 0;
+ oldcount = eerb->buffer_page_count;
+ eerb->buffer_page_count = newsize;
+ spin_unlock_irqrestore(&bufferlock, flags);
+
+ if (oldcount > newsize) {
+ for (i = newsize; i < oldcount; ++i) {
+ free_page((unsigned long)old[i]);
+ }
+ }
+ kfree(old);
+
+ return 0;
+}
+
+
+/*****************************************************************************/
+/* The extended error reporting functionality */
+/*****************************************************************************/
+
+/*
+ * When a DASD device driver wants to report an error, it calls the
+ * function dasd_eer_write_trigger (via a notifier mechanism) and gives the
+ * respective trigger ID as parameter.
+ * Currently there are four kinds of triggers:
+ *
+ * DASD_EER_FATALERROR: all kinds of unrecoverable I/O problems
+ * DASD_EER_PPRCSUSPEND: PPRC was suspended
+ * DASD_EER_NOPATH: There is no path to the device left.
+ * DASD_EER_STATECHANGE: The state of the device has changed.
+ *
+ * For the first three triggers all required information can be supplied by
+ * the caller. For these triggers a record is written by the function
+ * dasd_eer_write_standard_trigger.
+ *
+ * When dasd_eer_write_trigger is called to write a DASD_EER_STATECHANGE
+ * trigger, we have to gather the necessary sense data first. We cannot queue
+ * the necessary SNSS (sense subsystem status) request immediatly, since we
+ * are likely to run in a deadlock situation. Instead, we schedule a
+ * work_struct that calls the function dasd_eer_sense_subsystem_status to
+ * create and start an SNSS request asynchronously.
+ *
+ * To avoid memory allocations at runtime, the necessary memory is allocated
+ * when the extended error reporting is enabled for a device (by
+ * dasd_eer_probe). There is one private eer data structure for each eer
+ * enabled DASD device. It contains memory for the work_struct, one SNSS cqr
+ * and a flags field that is used to coordinate the use of the cqr. The call
+ * to write a state change trigger can come in at any time, so we have one flag
+ * CQR_IN_USE that protects the cqr itself. When this flag indicates that the
+ * cqr is currently in use, dasd_eer_sense_subsystem_status cannot start a
+ * second request but sets the SNSS_REQUESTED flag instead.
+ *
+ * When the request is finished, the callback function dasd_eer_SNSS_cb
+ * is called. This function will invoke the function
+ * dasd_eer_write_SNSS_trigger to finally write the trigger. It will also
+ * check the SNSS_REQUESTED flag and if it is set it will call
+ * dasd_eer_sense_subsystem_status again.
+ *
+ * To avoid race conditions during the handling of the lock, the flags must
+ * be protected by the snsslock.
+ */
+
+struct dasd_eer_private {
+ struct dasd_ccw_req *cqr;
+ unsigned long flags;
+ struct work_struct worker;
+};
+
+static void dasd_eer_destroy(struct dasd_device *device,
+ struct dasd_eer_private *eer);
+static int
+dasd_eer_write_trigger(struct dasd_eer_trigger *trigger);
+static void dasd_eer_sense_subsystem_status(void *data);
+static int dasd_eer_notify(struct notifier_block *self,
+ unsigned long action, void *data);
+
+struct workqueue_struct *dasd_eer_workqueue;
+
+#define SNSS_DATA_SIZE 44
+static spinlock_t snsslock = SPIN_LOCK_UNLOCKED;
+
+#define DASD_EER_BUSID_SIZE 10
+struct dasd_eer_header {
+ __u32 total_size;
+ __u32 trigger;
+ __u64 tv_sec;
+ __u64 tv_usec;
+ char busid[DASD_EER_BUSID_SIZE];
+} __attribute__ ((packed));
+
+static struct notifier_block dasd_eer_nb = {
+ .notifier_call = dasd_eer_notify,
+};
+
+/*
+ * flags for use with dasd_eer_private
+ */
+#define CQR_IN_USE 0
+#define SNSS_REQUESTED 1
+
+/*
+ * This function checks if extended error reporting is available for a given
+ * dasd_device. If yes, then it creates and returns a struct dasd_eer,
+ * otherwise it returns an -EPERM error pointer.
+ */
+struct dasd_eer_private *
+dasd_eer_probe(struct dasd_device *device)
+{
+ struct dasd_eer_private *private;
+
+ if (!(device && device->discipline
+ && !strcmp(device->discipline->name, "ECKD"))) {
+ return ERR_PTR(-EPERM);
+ }
+ /* allocate the private data structure */
+ private = (struct dasd_eer_private *)kmalloc(
+ sizeof(struct dasd_eer_private), GFP_KERNEL);
+ if (!private) {
+ return ERR_PTR(-ENOMEM);
+ }
+ INIT_WORK(&private->worker, dasd_eer_sense_subsystem_status,
+ (void *)device);
+ private->cqr = dasd_kmalloc_request("ECKD",
+ 1 /* SNSS */ ,
+ SNSS_DATA_SIZE ,
+ device);
+ if (!private->cqr) {
+ kfree(private);
+ return ERR_PTR(-ENOMEM);
+ }
+ private->flags = 0;
+ return private;
+};
+
+/*
+ * If our private SNSS request is queued, remove it from the
+ * dasd ccw queue so we can free the requests memory.
+ */
+static void
+dasd_eer_dequeue_SNSS_request(struct dasd_device *device,
+ struct dasd_eer_private *eer)
+{
+ struct list_head *lst, *nxt;
+ struct dasd_ccw_req *cqr, *erpcqr;
+ dasd_erp_fn_t erp_fn;
+
+ spin_lock_irq(get_ccwdev_lock(device->cdev));
+ list_for_each_safe(lst, nxt, &device->ccw_queue) {
+ cqr = list_entry(lst, struct dasd_ccw_req, list);
+ /* we are looking for two kinds or requests */
+ /* first kind: our SNSS request: */
+ if (cqr == eer->cqr) {
+ if (cqr->status == DASD_CQR_IN_IO)
+ device->discipline->term_IO(cqr);
+ list_del(&cqr->list);
+ break;
+ }
+ /* second kind: ERP requests for our SNSS request */
+ if (cqr->refers) {
+ /* If this erp request chain ends in our cqr, then */
+ /* cal the erp_postaction to clean it up */
+ erpcqr = cqr;
+ while (erpcqr->refers) {
+ erpcqr = erpcqr->refers;
+ }
+ if (erpcqr == eer->cqr) {
+ erp_fn = device->discipline->erp_postaction(
+ cqr);
+ erp_fn(cqr);
+ }
+ continue;
+ }
+ }
+ spin_unlock_irq(get_ccwdev_lock(device->cdev));
+}
+
+/*
+ * This function dismantles a struct dasd_eer that was created by
+ * dasd_eer_probe. Since we want to free our private data structure,
+ * we must make sure that the memory is not in use anymore.
+ * We have to flush the work queue and remove a possible SNSS request
+ * from the dasd queue.
+ */
+static void
+dasd_eer_destroy(struct dasd_device *device, struct dasd_eer_private *eer)
+{
+ flush_workqueue(dasd_eer_workqueue);
+ dasd_eer_dequeue_SNSS_request(device, eer);
+ dasd_kfree_request(eer->cqr, device);
+ kfree(eer);
+};
+
+/*
+ * enable the extended error reporting for a particular device
+ */
+static int
+dasd_eer_enable_on_device(struct dasd_device *device)
+{
+ void *eer;
+ if (!device)
+ return -ENODEV;
+ if (device->eer)
+ return 0;
+ if (!try_module_get(THIS_MODULE)) {
+ return -EINVAL;
+ }
+ eer = (void *)dasd_eer_probe(device);
+ if (IS_ERR(eer)) {
+ module_put(THIS_MODULE);
+ return PTR_ERR(eer);
+ }
+ device->eer = eer;
+ return 0;
+}
+
+/*
+ * enable the extended error reporting for a particular device
+ */
+static int
+dasd_eer_disable_on_device(struct dasd_device *device)
+{
+ struct dasd_eer_private *eer = device->eer;
+
+ if (!device)
+ return -ENODEV;
+ if (!device->eer)
+ return 0;
+ device->eer = NULL;
+ dasd_eer_destroy(device,eer);
+ module_put(THIS_MODULE);
+
+ return 0;
+}
+
+/*
+ * Set extended error reporting (eer)
+ * Note: This will be registered as a DASD ioctl, to be called on DASD devices.
+ */
+static int
+dasd_ioctl_set_eer(struct block_device *bdev, int no, long args)
+{
+ struct dasd_device *device;
+ int intval;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+ if (bdev != bdev->bd_contains)
+ /* Error-reporting is not allowed for partitions */
+ return -EINVAL;
+ if (get_user(intval, (int __user *) args))
+ return -EFAULT;
+ device = bdev->bd_disk->private_data;
+ if (device == NULL)
+ return -ENODEV;
+
+ intval = (intval != 0);
+ DEV_MESSAGE (KERN_DEBUG, device,
+ "set eer on device to %d", intval);
+ if (intval)
+ return dasd_eer_enable_on_device(device);
+ else
+ return dasd_eer_disable_on_device(device);
+}
+
+/*
+ * Get value of extended error reporting.
+ * Note: This will be registered as a DASD ioctl, to be called on DASD devices.
+ */
+static int
+dasd_ioctl_get_eer(struct block_device *bdev, int no, long args)
+{
+ struct dasd_device *device;
+
+ device = bdev->bd_disk->private_data;
+ if (device == NULL)
+ return -ENODEV;
+ return put_user((device->eer != NULL), (int __user *) args);
+}
+
+/*
+ * The following function can be used for those triggers that have
+ * all necessary data available when the function is called.
+ * If the parameter cqr is not NULL, the chain of requests will be searched
+ * for valid sense data, and all valid sense data sets will be added to
+ * the triggers data.
+ */
+static int
+dasd_eer_write_standard_trigger(int trigger, struct dasd_device *device,
+ struct dasd_ccw_req *cqr)
+{
+ struct dasd_ccw_req *temp_cqr;
+ int data_size;
+ struct timeval tv;
+ struct dasd_eer_header header;
+ unsigned long flags;
+ struct eerbuffer *eerb;
+
+ /* go through cqr chain and count the valid sense data sets */
+ temp_cqr = cqr;
+ data_size = 0;
+ while (temp_cqr) {
+ if (temp_cqr->irb.esw.esw0.erw.cons)
+ data_size += 32;
+ temp_cqr = temp_cqr->refers;
+ }
+
+ header.total_size = sizeof(header) + data_size + 4; /* "EOR" */
+ header.trigger = trigger;
+ do_gettimeofday(&tv);
+ header.tv_sec = tv.tv_sec;
+ header.tv_usec = tv.tv_usec;
+ strncpy(header.busid, device->cdev->dev.bus_id, DASD_EER_BUSID_SIZE);
+
+ spin_lock_irqsave(&bufferlock, flags);
+ list_for_each_entry(eerb, &bufferlist, list) {
+ dasd_eer_start_record(eerb, header.total_size);
+ dasd_eer_write_buffer(eerb, sizeof(header), (char*)(&header));
+ temp_cqr = cqr;
+ while (temp_cqr) {
+ if (temp_cqr->irb.esw.esw0.erw.cons)
+ dasd_eer_write_buffer(eerb, 32, cqr->irb.ecw);
+ temp_cqr = temp_cqr->refers;
+ }
+ dasd_eer_write_buffer(eerb, 4,"EOR");
+ }
+ spin_unlock_irqrestore(&bufferlock, flags);
+
+ wake_up_interruptible(&dasd_eer_read_wait_queue);
+
+ return 0;
+}
+
+/*
+ * This function writes a DASD_EER_STATECHANGE trigger.
+ */
+static void
+dasd_eer_write_SNSS_trigger(struct dasd_device *device,
+ struct dasd_ccw_req *cqr)
+{
+ int data_size;
+ int snss_rc;
+ struct timeval tv;
+ struct dasd_eer_header header;
+ unsigned long flags;
+ struct eerbuffer *eerb;
+
+ snss_rc = (cqr->status == DASD_CQR_FAILED) ? -EIO : 0;
+ if (snss_rc)
+ data_size = 0;
+ else
+ data_size = SNSS_DATA_SIZE;
+
+ header.total_size = sizeof(header) + data_size + 4; /* "EOR" */
+ header.trigger = DASD_EER_STATECHANGE;
+ do_gettimeofday(&tv);
+ header.tv_sec = tv.tv_sec;
+ header.tv_usec = tv.tv_usec;
+ strncpy(header.busid, device->cdev->dev.bus_id, DASD_EER_BUSID_SIZE);
+
+ spin_lock_irqsave(&bufferlock, flags);
+ list_for_each_entry(eerb, &bufferlist, list) {
+ dasd_eer_start_record(eerb, header.total_size);
+ dasd_eer_write_buffer(eerb, sizeof(header),(char*)(&header));
+ if (!snss_rc)
+ dasd_eer_write_buffer(eerb, SNSS_DATA_SIZE, cqr->data);
+ dasd_eer_write_buffer(eerb, 4,"EOR");
+ }
+ spin_unlock_irqrestore(&bufferlock, flags);
+
+ wake_up_interruptible(&dasd_eer_read_wait_queue);
+}
+
+/*
+ * callback function for use with SNSS request
+ */
+static void
+dasd_eer_SNSS_cb(struct dasd_ccw_req *cqr, void *data)
+{
+ struct dasd_device *device;
+ struct dasd_eer_private *private;
+ unsigned long irqflags;
+
+ device = (struct dasd_device *)data;
+ private = (struct dasd_eer_private *)device->eer;
+ dasd_eer_write_SNSS_trigger(device, cqr);
+ spin_lock_irqsave(&snsslock, irqflags);
+ if(!test_and_clear_bit(SNSS_REQUESTED, &private->flags)) {
+ clear_bit(CQR_IN_USE, &private->flags);
+ spin_unlock_irqrestore(&snsslock, irqflags);
+ return;
+ };
+ clear_bit(CQR_IN_USE, &private->flags);
+ spin_unlock_irqrestore(&snsslock, irqflags);
+ dasd_eer_sense_subsystem_status(device);
+ return;
+}
+
+/*
+ * clean a used cqr before using it again
+ */
+static void
+dasd_eer_clean_SNSS_request(struct dasd_ccw_req *cqr)
+{
+ struct ccw1 *cpaddr = cqr->cpaddr;
+ void *data = cqr->data;
+
+ memset(cqr, 0, sizeof(struct dasd_ccw_req));
+ memset(cpaddr, 0, sizeof(struct ccw1));
+ memset(data, 0, SNSS_DATA_SIZE);
+ cqr->cpaddr = cpaddr;
+ cqr->data = data;
+ strncpy((char *) &cqr->magic, "ECKD", 4);
+ ASCEBC((char *) &cqr->magic, 4);
+ set_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
+}
+
+/*
+ * build and start an SNSS request
+ * This function is called from a work queue so we have to
+ * pass the dasd_device pointer as a void pointer.
+ */
+static void
+dasd_eer_sense_subsystem_status(void *data)
+{
+ struct dasd_device *device;
+ struct dasd_eer_private *private;
+ struct dasd_ccw_req *cqr;
+ struct ccw1 *ccw;
+ unsigned long irqflags;
+
+ device = (struct dasd_device *)data;
+ private = (struct dasd_eer_private *)device->eer;
+ if (!private) /* device not eer enabled any more */
+ return;
+ cqr = private->cqr;
+ spin_lock_irqsave(&snsslock, irqflags);
+ if(test_and_set_bit(CQR_IN_USE, &private->flags)) {
+ set_bit(SNSS_REQUESTED, &private->flags);
+ spin_unlock_irqrestore(&snsslock, irqflags);
+ return;
+ };
+ spin_unlock_irqrestore(&snsslock, irqflags);
+ dasd_eer_clean_SNSS_request(cqr);
+ cqr->device = device;
+ cqr->retries = 255;
+ cqr->expires = 10 * HZ;
+
+ ccw = cqr->cpaddr;
+ ccw->cmd_code = DASD_ECKD_CCW_SNSS;
+ ccw->count = SNSS_DATA_SIZE;
+ ccw->flags = 0;
+ ccw->cda = (__u32)(addr_t)cqr->data;
+
+ cqr->buildclk = get_clock();
+ cqr->status = DASD_CQR_FILLED;
+ cqr->callback = dasd_eer_SNSS_cb;
+ cqr->callback_data = (void *)device;
+ dasd_add_request_head(cqr);
+
+ return;
+}
+
+/*
+ * This function is called for all triggers. It calls the appropriate
+ * function that writes the actual trigger records.
+ */
+static int
+dasd_eer_write_trigger(struct dasd_eer_trigger *trigger)
+{
+ int rc;
+ struct dasd_eer_private *private = trigger->device->eer;
+
+ switch (trigger->id) {
+ case DASD_EER_FATALERROR:
+ case DASD_EER_PPRCSUSPEND:
+ rc = dasd_eer_write_standard_trigger(
+ trigger->id, trigger->device, trigger->cqr);
+ break;
+ case DASD_EER_NOPATH:
+ rc = dasd_eer_write_standard_trigger(
+ trigger->id, trigger->device, NULL);
+ break;
+ case DASD_EER_STATECHANGE:
+ if (queue_work(dasd_eer_workqueue, &private->worker)) {
+ rc=0;
+ } else {
+ /* If the work_struct was already queued, it can't
+ * be queued again. But this is OK since we don't
+ * need to have it queued twice.
+ */
+ rc = -EBUSY;
+ }
+ break;
+ default: /* unknown trigger, so we write it without any sense data */
+ rc = dasd_eer_write_standard_trigger(
+ trigger->id, trigger->device, NULL);
+ break;
+ }
+ return rc;
+}
+
+/*
+ * This function is registered with the dasd device driver and gets called
+ * for all dasd eer notifications.
+ */
+static int dasd_eer_notify(struct notifier_block *self,
+ unsigned long action, void *data)
+{
+ switch (action) {
+ case DASD_EER_DISABLE:
+ dasd_eer_disable_on_device((struct dasd_device *)data);
+ break;
+ case DASD_EER_TRIGGER:
+ dasd_eer_write_trigger((struct dasd_eer_trigger *)data);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+
+/*****************************************************************************/
+/* the device operations */
+/*****************************************************************************/
+
+/*
+ * On the one side we need a lock to access our internal buffer, on the
+ * other side a copy_to_user can sleep. So we need to copy the data we have
+ * to transfer in a readbuffer, which is protected by the readbuffer_mutex.
+ */
+static char readbuffer[PAGE_SIZE];
+DECLARE_MUTEX(readbuffer_mutex);
+
+
+static int
+dasd_eer_open(struct inode *inp, struct file *filp)
+{
+ struct eerbuffer *eerb;
+ unsigned long flags;
+
+ eerb = kmalloc(sizeof(struct eerbuffer), GFP_KERNEL);
+ eerb->head = 0;
+ eerb->tail = 0;
+ eerb->residual = 0;
+ eerb->buffer_page_count = 1;
+ eerb->buffersize = eerb->buffer_page_count * PAGE_SIZE;
+ eerb->buffer = kmalloc(eerb->buffer_page_count*sizeof(char*),
+ GFP_KERNEL);
+ if (!eerb->buffer)
+ return -ENOMEM;
+ if (dasd_eer_allocate_buffer_pages(eerb->buffer,
+ eerb->buffer_page_count)) {
+ kfree(eerb->buffer);
+ return -ENOMEM;
+ }
+ filp->private_data = eerb;
+ spin_lock_irqsave(&bufferlock, flags);
+ list_add(&eerb->list, &bufferlist);
+ spin_unlock_irqrestore(&bufferlock, flags);
+
+ return nonseekable_open(inp,filp);
+}
+
+static int
+dasd_eer_close(struct inode *inp, struct file *filp)
+{
+ struct eerbuffer *eerb;
+ unsigned long flags;
+
+ eerb = (struct eerbuffer *)filp->private_data;
+ spin_lock_irqsave(&bufferlock, flags);
+ list_del(&eerb->list);
+ spin_unlock_irqrestore(&bufferlock, flags);
+ dasd_eer_free_buffer_pages(eerb->buffer, eerb->buffer_page_count);
+ kfree(eerb->buffer);
+ kfree(eerb);
+
+ return 0;
+}
+
+static long
+dasd_eer_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+ int intval;
+ struct eerbuffer *eerb;
+
+ eerb = (struct eerbuffer *)filp->private_data;
+ switch (cmd) {
+ case DASD_EER_PURGE:
+ dasd_eer_purge_buffer(eerb);
+ return 0;
+ case DASD_EER_SETBUFSIZE:
+ if (get_user(intval, (int __user *)arg))
+ return -EFAULT;
+ return dasd_eer_resize_buffer(eerb, intval);
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+static ssize_t
+dasd_eer_read(struct file *filp, char __user *buf, size_t count, loff_t *ppos)
+{
+ int tc,rc;
+ int tailcount,effective_count;
+ unsigned long flags;
+ struct eerbuffer *eerb;
+
+ eerb = (struct eerbuffer *)filp->private_data;
+ if(down_interruptible(&readbuffer_mutex))
+ return -ERESTARTSYS;
+
+ spin_lock_irqsave(&bufferlock, flags);
+
+ if (eerb->residual < 0) { /* the remainder of this record */
+ /* has been deleted */
+ eerb->residual = 0;
+ spin_unlock_irqrestore(&bufferlock, flags);
+ up(&readbuffer_mutex);
+ return -EIO;
+ } else if (eerb->residual > 0) {
+ /* OK we still have a second half of a record to deliver */
+ effective_count = min(eerb->residual, (int)count);
+ eerb->residual -= effective_count;
+ } else {
+ tc = 0;
+ while (!tc) {
+ tc = dasd_eer_read_buffer(eerb,
+ sizeof(tailcount), (char*)(&tailcount));
+ if (!tc) {
+ /* no data available */
+ spin_unlock_irqrestore(&bufferlock, flags);
+ up(&readbuffer_mutex);
+ if (filp->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+ rc = wait_event_interruptible(
+ dasd_eer_read_wait_queue,
+ eerb->head != eerb->tail);
+ if (rc) {
+ return rc;
+ }
+ if(down_interruptible(&readbuffer_mutex))
+ return -ERESTARTSYS;
+ spin_lock_irqsave(&bufferlock, flags);
+ }
+ }
+ WARN_ON(tc != sizeof(tailcount));
+ effective_count = min(tailcount,(int)count);
+ eerb->residual = tailcount - effective_count;
+ }
+
+ tc = dasd_eer_read_buffer(eerb, effective_count, readbuffer);
+ WARN_ON(tc != effective_count);
+
+ spin_unlock_irqrestore(&bufferlock, flags);
+
+ if (copy_to_user(buf, readbuffer, effective_count)) {
+ up(&readbuffer_mutex);
+ return -EFAULT;
+ }
+
+ up(&readbuffer_mutex);
+ return effective_count;
+}
+
+static unsigned int
+dasd_eer_poll (struct file *filp, poll_table *ptable)
+{
+ unsigned int mask;
+ unsigned long flags;
+ struct eerbuffer *eerb;
+
+ eerb = (struct eerbuffer *)filp->private_data;
+ poll_wait(filp, &dasd_eer_read_wait_queue, ptable);
+ spin_lock_irqsave(&bufferlock, flags);
+ if (eerb->head != eerb->tail)
+ mask = POLLIN | POLLRDNORM ;
+ else
+ mask = 0;
+ spin_unlock_irqrestore(&bufferlock, flags);
+ return mask;
+}
+
+static struct file_operations dasd_eer_fops = {
+ .open = &dasd_eer_open,
+ .release = &dasd_eer_close,
+ .unlocked_ioctl = &dasd_eer_ioctl,
+ .compat_ioctl = &dasd_eer_ioctl,
+ .read = &dasd_eer_read,
+ .poll = &dasd_eer_poll,
+ .owner = THIS_MODULE,
+};
+
+static struct miscdevice dasd_eer_dev = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "dasd_eer",
+ .fops = &dasd_eer_fops,
+};
+
+
+/*****************************************************************************/
+/* Init and exit */
+/*****************************************************************************/
+
+static int
+__init dasd_eer_init(void)
+{
+ int rc;
+
+ dasd_eer_workqueue = create_singlethread_workqueue("dasd_eer");
+ if (!dasd_eer_workqueue) {
+ MESSAGE(KERN_ERR , "%s", "dasd_eer_init could not "
+ "create workqueue \n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ rc = dasd_register_eer_notifier(&dasd_eer_nb);
+ if (rc) {
+ MESSAGE(KERN_ERR, "%s", "dasd_eer_init could not "
+ "register error reporting");
+ goto queue;
+ }
+
+ dasd_ioctl_no_register(THIS_MODULE, BIODASDEERSET, dasd_ioctl_set_eer);
+ dasd_ioctl_no_register(THIS_MODULE, BIODASDEERGET, dasd_ioctl_get_eer);
+
+ /* we don't need our own character device,
+ * so we just register as misc device */
+ rc = misc_register(&dasd_eer_dev);
+ if (rc) {
+ MESSAGE(KERN_ERR, "%s", "dasd_eer_init could not "
+ "register misc device");
+ goto unregister;
+ }
+
+ return 0;
+
+unregister:
+ dasd_unregister_eer_notifier(&dasd_eer_nb);
+ dasd_ioctl_no_unregister(THIS_MODULE, BIODASDEERSET,
+ dasd_ioctl_set_eer);
+ dasd_ioctl_no_unregister(THIS_MODULE, BIODASDEERGET,
+ dasd_ioctl_get_eer);
+queue:
+ destroy_workqueue(dasd_eer_workqueue);
+out:
+ return rc;
+
+}
+module_init(dasd_eer_init);
+
+static void
+__exit dasd_eer_exit(void)
+{
+ dasd_unregister_eer_notifier(&dasd_eer_nb);
+ dasd_ioctl_no_unregister(THIS_MODULE, BIODASDEERSET,
+ dasd_ioctl_set_eer);
+ dasd_ioctl_no_unregister(THIS_MODULE, BIODASDEERGET,
+ dasd_ioctl_get_eer);
+ destroy_workqueue(dasd_eer_workqueue);
+
+ WARN_ON(misc_deregister(&dasd_eer_dev) != 0);
+}
+module_exit(dasd_eer_exit);
diff --git a/drivers/s390/block/dasd_erp.c b/drivers/s390/block/dasd_erp.c
index 7cb98d2..8fd71ab 100644
--- a/drivers/s390/block/dasd_erp.c
+++ b/drivers/s390/block/dasd_erp.c
@@ -7,7 +7,6 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999-2001
*
- * $Revision: 1.14 $
*/
#include <linux/config.h>
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index 8ec75dc..9114569 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -4,7 +4,6 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
*
- * $Revision: 1.41 $
*/
#include <linux/config.h>
diff --git a/drivers/s390/block/dasd_fba.h b/drivers/s390/block/dasd_fba.h
index 624f040..da1fa91 100644
--- a/drivers/s390/block/dasd_fba.h
+++ b/drivers/s390/block/dasd_fba.h
@@ -4,7 +4,6 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
*
- * $Revision: 1.6 $
*/
#ifndef DASD_FBA_H
diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c
index a601c9a..65dc844 100644
--- a/drivers/s390/block/dasd_genhd.c
+++ b/drivers/s390/block/dasd_genhd.c
@@ -9,7 +9,6 @@
*
* gendisk related functions for the dasd driver.
*
- * $Revision: 1.51 $
*/
#include <linux/config.h>
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index e4b4015..d1b08fa 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -6,7 +6,6 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
*
- * $Revision: 1.68 $
*/
#ifndef DASD_INT_H
@@ -276,6 +275,34 @@
extern struct dasd_discipline *dasd_diag_discipline_pointer;
+
+/*
+ * Notification numbers for extended error reporting notifications:
+ * The DASD_EER_DISABLE notification is sent before a dasd_device (and it's
+ * eer pointer) is freed. The error reporting module needs to do all necessary
+ * cleanup steps.
+ * The DASD_EER_TRIGGER notification sends the actual error reports (triggers).
+ */
+#define DASD_EER_DISABLE 0
+#define DASD_EER_TRIGGER 1
+
+/* Trigger IDs for extended error reporting DASD_EER_TRIGGER notification */
+#define DASD_EER_FATALERROR 1
+#define DASD_EER_NOPATH 2
+#define DASD_EER_STATECHANGE 3
+#define DASD_EER_PPRCSUSPEND 4
+
+/*
+ * The dasd_eer_trigger structure contains all data that we need to send
+ * along with an DASD_EER_TRIGGER notification.
+ */
+struct dasd_eer_trigger {
+ unsigned int id;
+ struct dasd_device *device;
+ struct dasd_ccw_req *cqr;
+};
+
+
struct dasd_device {
/* Block device stuff. */
struct gendisk *gdp;
@@ -289,6 +316,9 @@
unsigned long flags; /* per device flags */
unsigned short features; /* copy of devmap-features (read-only!) */
+ /* extended error reporting stuff (eer) */
+ void *eer;
+
/* Device discipline stuff. */
struct dasd_discipline *discipline;
char *private;
@@ -489,6 +519,12 @@
int dasd_generic_set_offline (struct ccw_device *cdev);
int dasd_generic_notify(struct ccw_device *, int);
void dasd_generic_auto_online (struct ccw_driver *);
+int dasd_register_eer_notifier(struct notifier_block *);
+int dasd_unregister_eer_notifier(struct notifier_block *);
+void dasd_write_eer_trigger(unsigned int , struct dasd_device *,
+ struct dasd_ccw_req *);
+
+
/* externals in dasd_devmap.c */
extern int dasd_max_devindex;
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index 9396fca..fafeeae 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -7,8 +7,6 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999-2001
*
- * $Revision: 1.50 $
- *
* i/o controls for the dasd driver.
*/
#include <linux/config.h>
@@ -423,8 +421,15 @@
dasd_info->cu_model = cdev->id.cu_model;
dasd_info->dev_type = cdev->id.dev_type;
dasd_info->dev_model = cdev->id.dev_model;
- dasd_info->open_count = atomic_read(&device->open_count);
dasd_info->status = device->state;
+ /*
+ * The open_count is increased for every opener, that includes
+ * the blkdev_get in dasd_scan_partitions.
+ * This must be hidden from user-space.
+ */
+ dasd_info->open_count = atomic_read(&device->open_count);
+ if (!device->bdev)
+ dasd_info->open_count++;
/*
* check if device is really formatted
diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c
index fff9020..2d5da3c 100644
--- a/drivers/s390/block/dasd_proc.c
+++ b/drivers/s390/block/dasd_proc.c
@@ -9,7 +9,6 @@
*
* /proc interface for the dasd driver.
*
- * $Revision: 1.33 $
*/
#include <linux/config.h>
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 1f06091..606f6ad 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/console.h>
#include <linux/interrupt.h>
+#include <linux/err.h>
#include <linux/slab.h>
#include <linux/bootmem.h>
@@ -864,7 +865,7 @@
}
cdev = ccw_device_probe_console();
- if (!cdev)
+ if (IS_ERR(cdev))
return -ENODEV;
raw3215[0] = raw = (struct raw3215_info *)
diff --git a/drivers/s390/char/con3270.c b/drivers/s390/char/con3270.c
index c570a9f..ef607a1 100644
--- a/drivers/s390/char/con3270.c
+++ b/drivers/s390/char/con3270.c
@@ -15,6 +15,7 @@
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/types.h>
+#include <linux/err.h>
#include <asm/ccwdev.h>
#include <asm/cio.h>
@@ -597,7 +598,7 @@
}
cdev = ccw_device_probe_console();
- if (!cdev)
+ if (IS_ERR(cdev))
return -ENODEV;
rp = raw3270_setup_console(cdev);
if (IS_ERR(rp))
diff --git a/drivers/s390/char/keyboard.c b/drivers/s390/char/keyboard.c
index 5bda234..a317a12 100644
--- a/drivers/s390/char/keyboard.c
+++ b/drivers/s390/char/keyboard.c
@@ -440,7 +440,11 @@
return -EPERM;
len = strnlen_user(u_kbs->kb_string,
sizeof(u_kbs->kb_string) - 1);
- p = kmalloc(len, GFP_KERNEL);
+ if (!len)
+ return -EFAULT;
+ if (len > sizeof(u_kbs->kb_string) - 1)
+ return -EINVAL;
+ p = kmalloc(len + 1, GFP_KERNEL);
if (!p)
return -ENOMEM;
if (copy_from_user(p, u_kbs->kb_string, len)) {
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 20be88e..682039c 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -1357,7 +1357,7 @@
debug_set_level(TAPE_DBF_AREA, 6);
#endif
- DBF_EVENT(3, "34xx init: $Revision: 1.23 $\n");
+ DBF_EVENT(3, "34xx init\n");
/* Register driver for 3480/3490 tapes. */
rc = ccw_driver_register(&tape_34xx_driver);
if (rc)
@@ -1377,8 +1377,7 @@
MODULE_DEVICE_TABLE(ccw, tape_34xx_ids);
MODULE_AUTHOR("(C) 2001-2002 IBM Deutschland Entwicklung GmbH");
-MODULE_DESCRIPTION("Linux on zSeries channel attached 3480 tape "
- "device driver ($Revision: 1.23 $)");
+MODULE_DESCRIPTION("Linux on zSeries channel attached 3480 tape device driver");
MODULE_LICENSE("GPL");
module_init(tape_34xx_init);
diff --git a/drivers/s390/char/tape_class.c b/drivers/s390/char/tape_class.c
index fcaee44..b3569c8 100644
--- a/drivers/s390/char/tape_class.c
+++ b/drivers/s390/char/tape_class.c
@@ -1,6 +1,6 @@
/*
* (C) Copyright IBM Corp. 2004
- * tape_class.c ($Revision: 1.8 $)
+ * tape_class.c
*
* Tape class device support
*
@@ -12,7 +12,7 @@
MODULE_AUTHOR("Stefan Bader <shbader@de.ibm.com>");
MODULE_DESCRIPTION(
"(C) Copyright IBM Corp. 2004 All Rights Reserved.\n"
- "tape_class.c ($Revision: 1.8 $)"
+ "tape_class.c"
);
MODULE_LICENSE("GPL");
diff --git a/drivers/s390/char/tape_class.h b/drivers/s390/char/tape_class.h
index 33133ad..3d0ca05 100644
--- a/drivers/s390/char/tape_class.h
+++ b/drivers/s390/char/tape_class.h
@@ -1,6 +1,6 @@
/*
* (C) Copyright IBM Corp. 2004 All Rights Reserved.
- * tape_class.h ($Revision: 1.4 $)
+ * tape_class.h
*
* Tape class device support
*
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 8f486e1..4ea438c 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -1239,7 +1239,7 @@
#ifdef DBF_LIKE_HELL
debug_set_level(TAPE_DBF_AREA, 6);
#endif
- DBF_EVENT(3, "tape init: ($Revision: 1.54 $)\n");
+ DBF_EVENT(3, "tape init\n");
tape_proc_init();
tapechar_init ();
tapeblock_init ();
@@ -1263,8 +1263,7 @@
MODULE_AUTHOR("(C) 2001 IBM Deutschland Entwicklung GmbH by Carsten Otte and "
"Michael Holzheu (cotte@de.ibm.com,holzheu@de.ibm.com)");
-MODULE_DESCRIPTION("Linux on zSeries channel attached "
- "tape device driver ($Revision: 1.54 $)");
+MODULE_DESCRIPTION("Linux on zSeries channel attached tape device driver");
MODULE_LICENSE("GPL");
module_init(tape_init);
diff --git a/drivers/s390/cio/airq.c b/drivers/s390/cio/airq.c
index cd2cc28..5287631 100644
--- a/drivers/s390/cio/airq.c
+++ b/drivers/s390/cio/airq.c
@@ -2,8 +2,6 @@
* drivers/s390/cio/airq.c
* S/390 common I/O routines -- support for adapter interruptions
*
- * $Revision: 1.15 $
- *
* Copyright (C) 1999-2002 IBM Deutschland Entwicklung GmbH,
* IBM Corporation
* Author(s): Ingo Adlung (adlung@de.ibm.com)
diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c
index 72f27c1..cb8e2e6 100644
--- a/drivers/s390/cio/blacklist.c
+++ b/drivers/s390/cio/blacklist.c
@@ -1,7 +1,6 @@
/*
* drivers/s390/cio/blacklist.c
* S/390 common I/O routines -- blacklisting of specific devices
- * $Revision: 1.42 $
*
* Copyright (C) 1999-2002 IBM Deutschland Entwicklung GmbH,
* IBM Corporation
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 6c077ad..8013c8e 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -1,7 +1,6 @@
/*
* drivers/s390/cio/ccwgroup.c
* bus driver for ccwgroup
- * $Revision: 1.35 $
*
* Copyright (C) 2002 IBM Deutschland Entwicklung GmbH,
* IBM Corporation
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 2cbb724..92be75d 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -1,7 +1,6 @@
/*
* drivers/s390/cio/chsc.c
* S/390 common I/O routines -- channel subsystem call
- * $Revision: 1.128 $
*
* Copyright (C) 1999-2002 IBM Deutschland Entwicklung GmbH,
* IBM Corporation
diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h
index 44e4b4b..3e75095 100644
--- a/drivers/s390/cio/chsc.h
+++ b/drivers/s390/cio/chsc.h
@@ -68,6 +68,6 @@
extern int chsc_enable_facility(int);
-#define to_channelpath(dev) container_of(dev, struct channel_path, dev)
+#define to_channelpath(device) container_of(device, struct channel_path, dev)
#endif
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 6223b06..cbb86fa 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -1,7 +1,6 @@
/*
* drivers/s390/cio/cio.c
* S/390 common I/O routines -- low level i/o calls
- * $Revision: 1.140 $
*
* Copyright (C) 1999-2002 IBM Deutschland Entwicklung GmbH,
* IBM Corporation
diff --git a/drivers/s390/cio/cmf.c b/drivers/s390/cio/cmf.c
index 0b03714..07ef3f6 100644
--- a/drivers/s390/cio/cmf.c
+++ b/drivers/s390/cio/cmf.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/s390/cio/cmf.c ($Revision: 1.19 $)
+ * linux/drivers/s390/cio/cmf.c
*
* Linux on zSeries Channel Measurement Facility support
*
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 5161087..1bbf231 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -1,7 +1,6 @@
/*
* drivers/s390/cio/css.c
* driver for channel subsystem
- * $Revision: 1.96 $
*
* Copyright (C) 2002 IBM Deutschland Entwicklung GmbH,
* IBM Corporation
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index a67e7e6..062fb10 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -1,7 +1,6 @@
/*
* drivers/s390/cio/device.c
* bus driver for ccw devices
- * $Revision: 1.140 $
*
* Copyright (C) 2002 IBM Deutschland Entwicklung GmbH,
* IBM Corporation
@@ -255,7 +254,7 @@
struct ccw_device_id *id = &(cdev->id);
int ret;
- ret = sprintf(buf, "ccw:t%04Xm%02x",
+ ret = sprintf(buf, "ccw:t%04Xm%02X",
id->cu_type, id->cu_model);
if (id->dev_type != 0)
ret += sprintf(buf + ret, "dt%04Xdm%02X\n",
@@ -1013,7 +1012,7 @@
int ret;
if (xchg(&console_cdev_in_use, 1) != 0)
- return NULL;
+ return ERR_PTR(-EBUSY);
sch = cio_probe_console();
if (IS_ERR(sch)) {
console_cdev_in_use = 0;
diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c
index 8b02189..3a50b19 100644
--- a/drivers/s390/cio/device_ops.c
+++ b/drivers/s390/cio/device_ops.c
@@ -1,8 +1,6 @@
/*
* drivers/s390/cio/device_ops.c
*
- * $Revision: 1.61 $
- *
* Copyright (C) 2002 IBM Deutschland Entwicklung GmbH,
* IBM Corporation
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c
index 77be2c3..45ce032 100644
--- a/drivers/s390/cio/qdio.c
+++ b/drivers/s390/cio/qdio.c
@@ -56,8 +56,6 @@
#include "ioasm.h"
#include "chsc.h"
-#define VERSION_QDIO_C "$Revision: 1.117 $"
-
/****************** MODULE PARAMETER VARIABLES ********************/
MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com>");
MODULE_DESCRIPTION("QDIO base support version 2, " \
@@ -66,8 +64,7 @@
/******************** HERE WE GO ***********************************/
-static const char version[] = "QDIO base support version 2 ("
- VERSION_QDIO_C "/" VERSION_QDIO_H "/" VERSION_CIO_QDIO_H ")";
+static const char version[] = "QDIO base support version 2";
#ifdef QDIO_PERFORMANCE_STATS
static int proc_perf_file_registration;
diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h
index fa385e7..ceb3ab3 100644
--- a/drivers/s390/cio/qdio.h
+++ b/drivers/s390/cio/qdio.h
@@ -5,8 +5,6 @@
#include "schid.h"
-#define VERSION_CIO_QDIO_H "$Revision: 1.40 $"
-
#ifdef CONFIG_QDIO_DEBUG
#define QDIO_VERBOSE_LEVEL 9
#else /* CONFIG_QDIO_DEBUG */
diff --git a/drivers/s390/crypto/z90common.h b/drivers/s390/crypto/z90common.h
index f87c785..dbbcda3 100644
--- a/drivers/s390/crypto/z90common.h
+++ b/drivers/s390/crypto/z90common.h
@@ -27,8 +27,6 @@
#ifndef _Z90COMMON_H_
#define _Z90COMMON_H_
-#define VERSION_Z90COMMON_H "$Revision: 1.17 $"
-
#define RESPBUFFSIZE 256
#define PCI_FUNC_KEY_DECRYPT 0x5044
diff --git a/drivers/s390/crypto/z90crypt.h b/drivers/s390/crypto/z90crypt.h
index 3a18443..5e6b1f53 100644
--- a/drivers/s390/crypto/z90crypt.h
+++ b/drivers/s390/crypto/z90crypt.h
@@ -29,8 +29,6 @@
#include <linux/ioctl.h>
-#define VERSION_Z90CRYPT_H "$Revision: 1.2.2.4 $"
-
#define z90crypt_VERSION 1
#define z90crypt_RELEASE 3 // 2 = PCIXCC, 3 = rewrite for coding standards
#define z90crypt_VARIANT 3 // 3 = CEX2A support
diff --git a/drivers/s390/crypto/z90hardware.c b/drivers/s390/crypto/z90hardware.c
index d7f7494..4141919 100644
--- a/drivers/s390/crypto/z90hardware.c
+++ b/drivers/s390/crypto/z90hardware.c
@@ -32,12 +32,6 @@
#include "z90crypt.h"
#include "z90common.h"
-#define VERSION_Z90HARDWARE_C "$Revision: 1.34 $"
-
-char z90hardware_version[] __initdata =
- "z90hardware.o (" VERSION_Z90HARDWARE_C "/"
- VERSION_Z90COMMON_H "/" VERSION_Z90CRYPT_H ")";
-
struct cca_token_hdr {
unsigned char token_identifier;
unsigned char version;
diff --git a/drivers/s390/crypto/z90main.c b/drivers/s390/crypto/z90main.c
index 2f54d03..7d6f190 100644
--- a/drivers/s390/crypto/z90main.c
+++ b/drivers/s390/crypto/z90main.c
@@ -38,14 +38,6 @@
#include "z90crypt.h"
#include "z90common.h"
-#define VERSION_Z90MAIN_C "$Revision: 1.62 $"
-
-static char z90main_version[] __initdata =
- "z90main.o (" VERSION_Z90MAIN_C "/"
- VERSION_Z90COMMON_H "/" VERSION_Z90CRYPT_H ")";
-
-extern char z90hardware_version[];
-
/**
* Defaults that may be modified.
*/
@@ -594,8 +586,6 @@
PRINTKN("Version %d.%d.%d loaded, built on %s %s\n",
z90crypt_VERSION, z90crypt_RELEASE, z90crypt_VARIANT,
__DATE__, __TIME__);
- PRINTKN("%s\n", z90main_version);
- PRINTKN("%s\n", z90hardware_version);
PDEBUG("create_z90crypt (domain index %d) successful.\n",
domain);
} else
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index e70af7f3..a86436a 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -2,8 +2,6 @@
* drivers/s390/net/claw.c
* ESCON CLAW network driver
*
- * $Revision: 1.38 $ $Date: 2005/08/29 09:47:04 $
- *
* Linux for zSeries version
* Copyright (C) 2002,2005 IBM Corporation
* Author(s) Original code written by:
@@ -4391,14 +4389,7 @@
claw_init(void)
{
int ret = 0;
- printk(KERN_INFO "claw: starting driver "
-#ifdef MODULE
- "module "
-#else
- "compiled into kernel "
-#endif
- " $Revision: 1.38 $ $Date: 2005/08/29 09:47:04 $ \n");
-
+ printk(KERN_INFO "claw: starting driver\n");
#ifdef FUNCTRACE
printk(KERN_INFO "claw: %s() enter \n",__FUNCTION__);
diff --git a/drivers/s390/net/claw.h b/drivers/s390/net/claw.h
index 3df7197..969be46 100644
--- a/drivers/s390/net/claw.h
+++ b/drivers/s390/net/claw.h
@@ -2,7 +2,7 @@
* Define constants *
* *
********************************************************/
-#define VERSION_CLAW_H "$Revision: 1.6 $"
+
/*-----------------------------------------------------*
* CCW command codes for CLAW protocol *
*------------------------------------------------------*/
diff --git a/drivers/s390/net/ctcdbug.c b/drivers/s390/net/ctcdbug.c
index 0e2a8bb..e6e72de 100644
--- a/drivers/s390/net/ctcdbug.c
+++ b/drivers/s390/net/ctcdbug.c
@@ -1,6 +1,6 @@
/*
*
- * linux/drivers/s390/net/ctcdbug.c ($Revision: 1.6 $)
+ * linux/drivers/s390/net/ctcdbug.c
*
* CTC / ESCON network driver - s390 dbf exploit.
*
@@ -9,8 +9,6 @@
* Author(s): Original Code written by
* Peter Tiedemann (ptiedem@de.ibm.com)
*
- * $Revision: 1.6 $ $Date: 2005/05/11 08:10:17 $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
@@ -80,4 +78,3 @@
return 0;
}
-
diff --git a/drivers/s390/net/ctcdbug.h b/drivers/s390/net/ctcdbug.h
index 7d6afa1..413925e 100644
--- a/drivers/s390/net/ctcdbug.h
+++ b/drivers/s390/net/ctcdbug.h
@@ -1,6 +1,6 @@
/*
*
- * linux/drivers/s390/net/ctcdbug.h ($Revision: 1.6 $)
+ * linux/drivers/s390/net/ctcdbug.h
*
* CTC / ESCON network driver - s390 dbf exploit.
*
@@ -9,8 +9,6 @@
* Author(s): Original Code written by
* Peter Tiedemann (ptiedem@de.ibm.com)
*
- * $Revision: 1.6 $ $Date: 2005/05/11 08:10:17 $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
diff --git a/drivers/s390/net/ctcmain.c b/drivers/s390/net/ctcmain.c
index 1901fee..af9f212 100644
--- a/drivers/s390/net/ctcmain.c
+++ b/drivers/s390/net/ctcmain.c
@@ -1,6 +1,4 @@
/*
- * $Id: ctcmain.c,v 1.79 2006/01/11 11:32:18 cohuck Exp $
- *
* CTC / ESCON network driver
*
* Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
@@ -37,8 +35,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * RELEASE-TAG: CTC/ESCON network driver $Revision: 1.79 $
- *
*/
#undef DEBUG
#include <linux/module.h>
@@ -248,22 +244,11 @@
print_banner(void)
{
static int printed = 0;
- char vbuf[] = "$Revision: 1.79 $";
- char *version = vbuf;
if (printed)
return;
- if ((version = strchr(version, ':'))) {
- char *p = strchr(version + 1, '$');
- if (p)
- *p = '\0';
- } else
- version = " ??? ";
- printk(KERN_INFO "CTC driver Version%s"
-#ifdef DEBUG
- " (DEBUG-VERSION, " __DATE__ __TIME__ ")"
-#endif
- " initialized\n", version);
+
+ printk(KERN_INFO "CTC driver initialized\n");
printed = 1;
}
diff --git a/drivers/s390/net/ctcmain.h b/drivers/s390/net/ctcmain.h
index ba3605f..d2e835c 100644
--- a/drivers/s390/net/ctcmain.h
+++ b/drivers/s390/net/ctcmain.h
@@ -1,6 +1,4 @@
/*
- * $Id: ctcmain.h,v 1.4 2005/03/24 09:04:17 mschwide Exp $
- *
* CTC / ESCON network driver
*
* Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
@@ -29,8 +27,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * RELEASE-TAG: CTC/ESCON network driver $Revision: 1.4 $
- *
*/
#ifndef _CTCMAIN_H_
diff --git a/drivers/s390/net/ctctty.c b/drivers/s390/net/ctctty.c
index 93d1725..5cdcdbf 100644
--- a/drivers/s390/net/ctctty.c
+++ b/drivers/s390/net/ctctty.c
@@ -1,6 +1,4 @@
/*
- * $Id: ctctty.c,v 1.29 2005/04/05 08:50:44 mschwide Exp $
- *
* CTC / ESCON network driver, tty interface.
*
* Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
diff --git a/drivers/s390/net/ctctty.h b/drivers/s390/net/ctctty.h
index 84b2f8f..7254dc0 100644
--- a/drivers/s390/net/ctctty.h
+++ b/drivers/s390/net/ctctty.h
@@ -1,6 +1,4 @@
/*
- * $Id: ctctty.h,v 1.4 2003/09/18 08:01:10 mschwide Exp $
- *
* CTC / ESCON network driver, tty interface.
*
* Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
diff --git a/drivers/s390/net/cu3088.c b/drivers/s390/net/cu3088.c
index 2014fb7..b125331 100644
--- a/drivers/s390/net/cu3088.c
+++ b/drivers/s390/net/cu3088.c
@@ -1,6 +1,4 @@
/*
- * $Id: cu3088.c,v 1.38 2006/01/12 14:33:09 cohuck Exp $
- *
* CTC / LCS ccw_device driver
*
* Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
diff --git a/drivers/s390/net/fsm.c b/drivers/s390/net/fsm.c
index 24029bd..6caf5fa 100644
--- a/drivers/s390/net/fsm.c
+++ b/drivers/s390/net/fsm.c
@@ -1,6 +1,4 @@
/**
- * $Id: fsm.c,v 1.6 2003/10/15 11:37:29 mschwide Exp $
- *
* A generic FSM based on fsm used in isdn4linux
*
*/
diff --git a/drivers/s390/net/fsm.h b/drivers/s390/net/fsm.h
index 5b98253..af679c1 100644
--- a/drivers/s390/net/fsm.h
+++ b/drivers/s390/net/fsm.h
@@ -1,5 +1,3 @@
-/* $Id: fsm.h,v 1.1.1.1 2002/03/13 19:33:09 mschwide Exp $
- */
#ifndef _FSM_H_
#define _FSM_H_
diff --git a/drivers/s390/net/iucv.c b/drivers/s390/net/iucv.c
index ea81773..760e77e 100644
--- a/drivers/s390/net/iucv.c
+++ b/drivers/s390/net/iucv.c
@@ -1,6 +1,4 @@
/*
- * $Id: iucv.c,v 1.47 2005/11/21 11:35:22 mschwide Exp $
- *
* IUCV network driver
*
* Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
@@ -29,8 +27,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * RELEASE-TAG: IUCV lowlevel driver $Revision: 1.47 $
- *
*/
/* #define DEBUG */
@@ -355,17 +351,7 @@
static void
iucv_banner(void)
{
- char vbuf[] = "$Revision: 1.47 $";
- char *version = vbuf;
-
- if ((version = strchr(version, ':'))) {
- char *p = strchr(version + 1, '$');
- if (p)
- *p = '\0';
- } else
- version = " ??? ";
- printk(KERN_INFO
- "IUCV lowlevel driver Version%s initialized\n", version);
+ printk(KERN_INFO "IUCV lowlevel driver initialized\n");
}
/**
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index da8c515..6229ba4 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -11,8 +11,6 @@
* Frank Pavlic (fpavlic@de.ibm.com) and
* Martin Schwidefsky <schwidefsky@de.ibm.com>
*
- * $Revision: 1.99 $ $Date: 2005/05/11 08:10:17 $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
@@ -59,9 +57,8 @@
/**
* initialization string for output
*/
-#define VERSION_LCS_C "$Revision: 1.99 $"
-static char version[] __initdata = "LCS driver ("VERSION_LCS_C "/" VERSION_LCS_H ")";
+static char version[] __initdata = "LCS driver";
static char debug_buffer[255];
/**
diff --git a/drivers/s390/net/lcs.h b/drivers/s390/net/lcs.h
index a7f348e..08e60ad 100644
--- a/drivers/s390/net/lcs.h
+++ b/drivers/s390/net/lcs.h
@@ -6,8 +6,6 @@
#include <linux/workqueue.h>
#include <asm/ccwdev.h>
-#define VERSION_LCS_H "$Revision: 1.19 $"
-
#define LCS_DBF_TEXT(level, name, text) \
do { \
debug_text_event(lcs_dbf_##name, level, text); \
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index ac4c4b8..71d3853 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -1,6 +1,4 @@
/*
- * $Id: netiucv.c,v 1.69 2006/01/12 14:33:09 cohuck Exp $
- *
* IUCV network driver
*
* Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
@@ -31,8 +29,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * RELEASE-TAG: IUCV network driver $Revision: 1.69 $
- *
*/
#undef DEBUG
@@ -2077,16 +2073,7 @@
static void
netiucv_banner(void)
{
- char vbuf[] = "$Revision: 1.69 $";
- char *version = vbuf;
-
- if ((version = strchr(version, ':'))) {
- char *p = strchr(version + 1, '$');
- if (p)
- *p = '\0';
- } else
- version = " ??? ";
- PRINT_INFO("NETIUCV driver Version%s initialized\n", version);
+ PRINT_INFO("NETIUCV driver initialized\n");
}
static void __exit
diff --git a/drivers/s390/net/qeth.h b/drivers/s390/net/qeth.h
index d238c7e..9a064d4 100644
--- a/drivers/s390/net/qeth.h
+++ b/drivers/s390/net/qeth.h
@@ -25,8 +25,6 @@
#include "qeth_mpc.h"
-#define VERSION_QETH_H "$Revision: 1.152 $"
-
#ifdef CONFIG_QETH_IPV6
#define QETH_VERSION_IPV6 ":IPv6"
#else
diff --git a/drivers/s390/net/qeth_eddp.c b/drivers/s390/net/qeth_eddp.c
index f94f1f25..b023131 100644
--- a/drivers/s390/net/qeth_eddp.c
+++ b/drivers/s390/net/qeth_eddp.c
@@ -1,6 +1,5 @@
/*
- *
- * linux/drivers/s390/net/qeth_eddp.c ($Revision: 1.13 $)
+ * linux/drivers/s390/net/qeth_eddp.c
*
* Enhanced Device Driver Packing (EDDP) support for the qeth driver.
*
@@ -8,8 +7,6 @@
*
* Author(s): Thomas Spatzier <tspat@de.ibm.com>
*
- * $Revision: 1.13 $ $Date: 2005/05/04 20:19:18 $
- *
*/
#include <linux/config.h>
#include <linux/errno.h>
diff --git a/drivers/s390/net/qeth_eddp.h b/drivers/s390/net/qeth_eddp.h
index e1b5186..cae9ba2 100644
--- a/drivers/s390/net/qeth_eddp.h
+++ b/drivers/s390/net/qeth_eddp.h
@@ -1,14 +1,12 @@
/*
- * linux/drivers/s390/net/qeth_eddp.c ($Revision: 1.5 $)
+ * linux/drivers/s390/net/qeth_eddp.h
*
- * Header file for qeth enhanced device driver pakcing.
+ * Header file for qeth enhanced device driver packing.
*
* Copyright 2004 IBM Corporation
*
* Author(s): Thomas Spatzier <tspat@de.ibm.com>
*
- * $Revision: 1.5 $ $Date: 2005/03/24 09:04:18 $
- *
*/
#ifndef __QETH_EDDP_H__
#define __QETH_EDDP_H__
diff --git a/drivers/s390/net/qeth_fs.h b/drivers/s390/net/qeth_fs.h
index c0b4c8d..e422b41 100644
--- a/drivers/s390/net/qeth_fs.h
+++ b/drivers/s390/net/qeth_fs.h
@@ -12,11 +12,6 @@
#ifndef __QETH_FS_H__
#define __QETH_FS_H__
-#define VERSION_QETH_FS_H "$Revision: 1.10 $"
-
-extern const char *VERSION_QETH_PROC_C;
-extern const char *VERSION_QETH_SYS_C;
-
#ifdef CONFIG_PROC_FS
extern int
qeth_create_procfs_entries(void);
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index 97f927c..410abea 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -1,6 +1,5 @@
/*
- *
- * linux/drivers/s390/net/qeth_main.c ($Revision: 1.251 $)
+ * linux/drivers/s390/net/qeth_main.c
*
* Linux on zSeries OSA Express and HiperSockets support
*
@@ -12,8 +11,6 @@
* Frank Pavlic (fpavlic@de.ibm.com) and
* Thomas Spatzier <tspat@de.ibm.com>
*
- * $Revision: 1.251 $ $Date: 2005/05/04 20:19:18 $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
@@ -73,7 +70,6 @@
#include "qeth_eddp.h"
#include "qeth_tso.h"
-#define VERSION_QETH_C "$Revision: 1.251 $"
static const char *version = "qeth S/390 OSA-Express driver";
/**
@@ -8626,12 +8622,7 @@
{
int rc=0;
- PRINT_INFO("loading %s (%s/%s/%s/%s/%s/%s/%s %s %s)\n",
- version, VERSION_QETH_C, VERSION_QETH_H,
- VERSION_QETH_MPC_H, VERSION_QETH_MPC_C,
- VERSION_QETH_FS_H, VERSION_QETH_PROC_C,
- VERSION_QETH_SYS_C, QETH_VERSION_IPV6,
- QETH_VERSION_VLAN);
+ PRINT_INFO("loading %s\n", version);
INIT_LIST_HEAD(&qeth_card_list.list);
INIT_LIST_HEAD(&qeth_notify_list);
diff --git a/drivers/s390/net/qeth_mpc.c b/drivers/s390/net/qeth_mpc.c
index 5f8754a..77c8320 100644
--- a/drivers/s390/net/qeth_mpc.c
+++ b/drivers/s390/net/qeth_mpc.c
@@ -11,8 +11,6 @@
#include <asm/cio.h>
#include "qeth_mpc.h"
-const char *VERSION_QETH_MPC_C = "$Revision: 1.13 $";
-
unsigned char IDX_ACTIVATE_READ[]={
0x00,0x00,0x80,0x00, 0x00,0x00,0x00,0x00,
0x19,0x01,0x01,0x80, 0x00,0x00,0x00,0x00,
diff --git a/drivers/s390/net/qeth_mpc.h b/drivers/s390/net/qeth_mpc.h
index 864cec5..011c410 100644
--- a/drivers/s390/net/qeth_mpc.h
+++ b/drivers/s390/net/qeth_mpc.h
@@ -14,10 +14,6 @@
#include <asm/qeth.h>
-#define VERSION_QETH_MPC_H "$Revision: 1.46 $"
-
-extern const char *VERSION_QETH_MPC_C;
-
#define IPA_PDU_HEADER_SIZE 0x40
#define QETH_IPA_PDU_LEN_TOTAL(buffer) (buffer+0x0e)
#define QETH_IPA_PDU_LEN_PDU1(buffer) (buffer+0x26)
diff --git a/drivers/s390/net/qeth_proc.c b/drivers/s390/net/qeth_proc.c
index 7bf3509..3c6339d 100644
--- a/drivers/s390/net/qeth_proc.c
+++ b/drivers/s390/net/qeth_proc.c
@@ -1,6 +1,6 @@
/*
*
- * linux/drivers/s390/net/qeth_fs.c ($Revision: 1.16 $)
+ * linux/drivers/s390/net/qeth_fs.c
*
* Linux on zSeries OSA Express and HiperSockets support
* This file contains code related to procfs.
@@ -21,8 +21,6 @@
#include "qeth_mpc.h"
#include "qeth_fs.h"
-const char *VERSION_QETH_PROC_C = "$Revision: 1.16 $";
-
/***** /proc/qeth *****/
#define QETH_PROCFILE_NAME "qeth"
static struct proc_dir_entry *qeth_procfile;
diff --git a/drivers/s390/net/qeth_sys.c b/drivers/s390/net/qeth_sys.c
index 0ea185f..c1831f5 100644
--- a/drivers/s390/net/qeth_sys.c
+++ b/drivers/s390/net/qeth_sys.c
@@ -1,6 +1,6 @@
/*
*
- * linux/drivers/s390/net/qeth_sys.c ($Revision: 1.60 $)
+ * linux/drivers/s390/net/qeth_sys.c
*
* Linux on zSeries OSA Express and HiperSockets support
* This file contains code related to sysfs.
@@ -20,8 +20,6 @@
#include "qeth_mpc.h"
#include "qeth_fs.h"
-const char *VERSION_QETH_SYS_C = "$Revision: 1.60 $";
-
/*****************************************************************************/
/* */
/* /sys-fs stuff UNDER DEVELOPMENT !!! */
diff --git a/drivers/s390/net/qeth_tso.h b/drivers/s390/net/qeth_tso.h
index 3c50b6f..1286dde 100644
--- a/drivers/s390/net/qeth_tso.h
+++ b/drivers/s390/net/qeth_tso.h
@@ -1,5 +1,5 @@
/*
- * linux/drivers/s390/net/qeth_tso.h ($Revision: 1.8 $)
+ * linux/drivers/s390/net/qeth_tso.h
*
* Header file for qeth TCP Segmentation Offload support.
*
@@ -7,8 +7,6 @@
*
* Author(s): Frank Pavlic <fpavlic@de.ibm.com>
*
- * $Revision: 1.8 $ $Date: 2005/05/04 20:19:18 $
- *
*/
#ifndef __QETH_TSO_H__
#define __QETH_TSO_H__
diff --git a/drivers/s390/s390_rdev.c b/drivers/s390/s390_rdev.c
index 206518c..e3f6471 100644
--- a/drivers/s390/s390_rdev.c
+++ b/drivers/s390/s390_rdev.c
@@ -1,7 +1,6 @@
/*
* drivers/s390/s390_rdev.c
* s390 root device
- * $Revision: 1.4 $
*
* Copyright (C) 2002, 2005 IBM Deutschland Entwicklung GmbH,
* IBM Corporation
diff --git a/drivers/s390/s390mach.h b/drivers/s390/s390mach.h
index d9ea7ed..7abb42a 100644
--- a/drivers/s390/s390mach.h
+++ b/drivers/s390/s390mach.h
@@ -90,15 +90,16 @@
static inline int stcrw(struct crw *pcrw )
{
- int ccode;
+ int ccode;
- __asm__ __volatile__(
- "STCRW 0(%1)\n\t"
- "IPM %0\n\t"
- "SRL %0,28\n\t"
- : "=d" (ccode) : "a" (pcrw)
- : "cc", "1" );
- return ccode;
+ __asm__ __volatile__(
+ "stcrw 0(%2)\n\t"
+ "ipm %0\n\t"
+ "srl %0,28\n\t"
+ : "=d" (ccode), "=m" (*pcrw)
+ : "a" (pcrw)
+ : "cc" );
+ return ccode;
}
#endif /* __s390mach */
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 167fef3..95b92f3 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -29,8 +29,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define ZFCP_AUX_REVISION "$Revision: 1.145 $"
-
#include "zfcp_ext.h"
/* accumulated log level (module parameter) */
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index 0fc4638..241136d 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -27,8 +27,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define ZFCP_CCW_C_REVISION "$Revision: 1.58 $"
-
#include "zfcp_ext.h"
#define ZFCP_LOG_AREA ZFCP_LOG_AREA_CONFIG
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 9559971..4d7d47c 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -23,8 +23,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define ZFCP_DBF_REVISION "$Revision$"
-
#include <asm/debug.h>
#include <linux/ctype.h>
#include "zfcp_ext.h"
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 9bb5110..e260d19 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -34,8 +34,6 @@
#ifndef ZFCP_DEF_H
#define ZFCP_DEF_H
-#define ZFCP_DEF_REVISION "$Revision: 1.111 $"
-
/*************************** INCLUDES *****************************************/
#include <linux/init.h>
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index c065cb8..da947e6 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -31,8 +31,6 @@
#define ZFCP_LOG_AREA ZFCP_LOG_AREA_ERP
-#define ZFCP_ERP_REVISION "$Revision: 1.86 $"
-
#include "zfcp_ext.h"
static int zfcp_erp_adisc(struct zfcp_port *);
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index c378226..c1ba7cf 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -32,8 +32,6 @@
#ifndef ZFCP_EXT_H
#define ZFCP_EXT_H
-#define ZFCP_EXT_REVISION "$Revision: 1.62 $"
-
#include "zfcp_def.h"
extern struct zfcp_data zfcp_data;
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index cbfab09..9f0cb3d 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -30,8 +30,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define ZFCP_FSF_C_REVISION "$Revision: 1.92 $"
-
#include "zfcp_ext.h"
static int zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *);
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index d719f66..1c32751 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -29,8 +29,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define ZFCP_QDIO_C_REVISION "$Revision: 1.20 $"
-
#include "zfcp_ext.h"
static inline void zfcp_qdio_sbal_limit(struct zfcp_fsf_req *, int);
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 3c2cbcc..e080375 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -31,8 +31,6 @@
#define ZFCP_LOG_AREA ZFCP_LOG_AREA_SCSI
-#define ZFCP_SCSI_REVISION "$Revision: 1.74 $"
-
#include "zfcp_ext.h"
static void zfcp_scsi_slave_destroy(struct scsi_device *sdp);
diff --git a/drivers/s390/scsi/zfcp_sysfs_adapter.c b/drivers/s390/scsi/zfcp_sysfs_adapter.c
index 9f26225..dfc0737 100644
--- a/drivers/s390/scsi/zfcp_sysfs_adapter.c
+++ b/drivers/s390/scsi/zfcp_sysfs_adapter.c
@@ -27,8 +27,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define ZFCP_SYSFS_ADAPTER_C_REVISION "$Revision: 1.38 $"
-
#include "zfcp_ext.h"
#define ZFCP_LOG_AREA ZFCP_LOG_AREA_CONFIG
diff --git a/drivers/s390/scsi/zfcp_sysfs_driver.c b/drivers/s390/scsi/zfcp_sysfs_driver.c
index 77a5e2d..6622d55 100644
--- a/drivers/s390/scsi/zfcp_sysfs_driver.c
+++ b/drivers/s390/scsi/zfcp_sysfs_driver.c
@@ -27,8 +27,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define ZFCP_SYSFS_DRIVER_C_REVISION "$Revision: 1.17 $"
-
#include "zfcp_ext.h"
#define ZFCP_LOG_AREA ZFCP_LOG_AREA_CONFIG
diff --git a/drivers/s390/scsi/zfcp_sysfs_port.c b/drivers/s390/scsi/zfcp_sysfs_port.c
index 3924eb3..f401d42 100644
--- a/drivers/s390/scsi/zfcp_sysfs_port.c
+++ b/drivers/s390/scsi/zfcp_sysfs_port.c
@@ -28,8 +28,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define ZFCP_SYSFS_PORT_C_REVISION "$Revision: 1.47 $"
-
#include "zfcp_ext.h"
#define ZFCP_LOG_AREA ZFCP_LOG_AREA_CONFIG
diff --git a/drivers/s390/scsi/zfcp_sysfs_unit.c b/drivers/s390/scsi/zfcp_sysfs_unit.c
index 2f50815..ad5dfb8 100644
--- a/drivers/s390/scsi/zfcp_sysfs_unit.c
+++ b/drivers/s390/scsi/zfcp_sysfs_unit.c
@@ -28,8 +28,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define ZFCP_SYSFS_UNIT_C_REVISION "$Revision: 1.30 $"
-
#include "zfcp_ext.h"
#define ZFCP_LOG_AREA ZFCP_LOG_AREA_CONFIG
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 38d6d00..014cc8d 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -38,10 +38,10 @@
#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/blkdev.h>
+#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <asm/semaphore.h>
-#include <asm/delay.h>
#include "aacraid.h"
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index 5caf6de..c840d5e 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -290,6 +290,10 @@
board_ahci }, /* ICH8M */
{ PCI_VENDOR_ID_INTEL, 0x282a, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_ahci }, /* ICH8M */
+ { 0x197b, 0x2360, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* JMicron JMB360 */
+ { 0x197b, 0x2363, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* JMicron JMB363 */
{ } /* terminate list */
};
@@ -830,7 +834,6 @@
struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
void __iomem *mmio = probe_ent->mmio_base;
u32 tmp, cap_save;
- u16 tmp16;
unsigned int i, j, using_dac;
int rc;
void __iomem *port_mmio;
@@ -864,9 +867,13 @@
writel(0xf, mmio + HOST_PORTS_IMPL);
(void) readl(mmio + HOST_PORTS_IMPL); /* flush */
- pci_read_config_word(pdev, 0x92, &tmp16);
- tmp16 |= 0xf;
- pci_write_config_word(pdev, 0x92, tmp16);
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+ u16 tmp16;
+
+ pci_read_config_word(pdev, 0x92, &tmp16);
+ tmp16 |= 0xf;
+ pci_write_config_word(pdev, 0x92, tmp16);
+ }
hpriv->cap = readl(mmio + HOST_CAP);
hpriv->port_map = readl(mmio + HOST_PORTS_IMPL);
@@ -1110,6 +1117,10 @@
if (have_msi)
hpriv->flags |= AHCI_FLAG_MSI;
+ /* JMicron-specific fixup: make sure we're in AHCI mode */
+ if (pdev->vendor == 0x197b)
+ pci_write_config_byte(pdev, 0x41, 0xa1);
+
/* initialize adapter */
rc = ahci_host_init(probe_ent);
if (rc)
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index 69ed77f..7955ebe 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -37,13 +37,13 @@
config AIC79XX_RESET_DELAY_MS
int "Initial bus reset delay in milli-seconds"
depends on SCSI_AIC79XX
- default "15000"
+ default "5000"
---help---
The number of milliseconds to delay after an initial bus reset.
The bus settle delay following all error recovery actions is
dictated by the SCSI layer and is not affected by this value.
- Default: 15000 (15 seconds)
+ Default: 5000 (5 seconds)
config AIC79XX_BUILD_FIRMWARE
bool "Build Adapter Firmware with Kernel Build"
diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h
index 2cfdbef..1d11f7e 100644
--- a/drivers/scsi/aic7xxx/aic79xx.h
+++ b/drivers/scsi/aic7xxx/aic79xx.h
@@ -37,7 +37,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.h#108 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.h#109 $
*
* $FreeBSD$
*/
@@ -222,6 +222,7 @@
typedef enum {
AHD_FENONE = 0x00000,
AHD_WIDE = 0x00001,/* Wide Channel */
+ AHD_AIC79XXB_SLOWCRC = 0x00002,/* SLOWCRC bit should be set */
AHD_MULTI_FUNC = 0x00100,/* Multi-Function/Channel Device */
AHD_TARGETMODE = 0x01000,/* Has tested target mode support */
AHD_MULTIROLE = 0x02000,/* Space for two roles at a time */
diff --git a/drivers/scsi/aic7xxx/aic79xx.reg b/drivers/scsi/aic7xxx/aic79xx.reg
index 3a32047..be14e2e 100644
--- a/drivers/scsi/aic7xxx/aic79xx.reg
+++ b/drivers/scsi/aic7xxx/aic79xx.reg
@@ -1,7 +1,7 @@
/*
* Aic79xx register and scratch ram definitions.
*
- * Copyright (c) 1994-2001 Justin T. Gibbs.
+ * Copyright (c) 1994-2001, 2004 Justin T. Gibbs.
* Copyright (c) 2000-2002 Adaptec Inc.
* All rights reserved.
*
@@ -39,7 +39,7 @@
*
* $FreeBSD$
*/
-VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#76 $"
+VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#77 $"
/*
* This file is processed by the aic7xxx_asm utility for use in assembling
@@ -3715,8 +3715,9 @@
SEQ_FLAGS2 {
size 1
- field TARGET_MSG_PENDING 0x02
- field SELECTOUT_QFROZEN 0x04
+ field PENDING_MK_MESSAGE 0x01
+ field TARGET_MSG_PENDING 0x02
+ field SELECTOUT_QFROZEN 0x04
}
ALLOCFIFO_SCBPTR {
@@ -3777,6 +3778,26 @@
CMDSIZE_TABLE {
size 8
}
+ /*
+ * When an SCB with the MK_MESSAGE flag is
+ * queued to the controller, it cannot enter
+ * the waiting for selection list until the
+ * selections for any previously queued
+ * commands to that target complete. During
+ * the wait, the MK_MESSAGE SCB is queued
+ * here.
+ */
+ MK_MESSAGE_SCB {
+ size 2
+ }
+ /*
+ * Saved SCSIID of MK_MESSAGE_SCB to avoid
+ * an extra SCBPTR operation when deciding
+ * if the MK_MESSAGE_SCB can be run.
+ */
+ MK_MESSAGE_SCSIID {
+ size 1
+ }
}
/************************* Hardware SCB Definition ****************************/
diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq
index bef1f9d..58bc175 100644
--- a/drivers/scsi/aic7xxx/aic79xx.seq
+++ b/drivers/scsi/aic7xxx/aic79xx.seq
@@ -1,7 +1,7 @@
/*
* Adaptec U320 device driver firmware for Linux and FreeBSD.
*
- * Copyright (c) 1994-2001 Justin T. Gibbs.
+ * Copyright (c) 1994-2001, 2004 Justin T. Gibbs.
* Copyright (c) 2000-2002 Adaptec Inc.
* All rights reserved.
*
@@ -40,7 +40,7 @@
* $FreeBSD$
*/
-VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#119 $"
+VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#120 $"
PATCH_ARG_LIST = "struct ahd_softc *ahd"
PREFIX = "ahd_"
@@ -110,10 +110,8 @@
* one last time.
*/
test SSTAT0, SELDO jnz select_out;
-END_CRITICAL;
call start_selection;
idle_loop_checkbus:
-BEGIN_CRITICAL;
test SSTAT0, SELDO jnz select_out;
END_CRITICAL;
test SSTAT0, SELDI jnz select_in;
@@ -294,7 +292,6 @@
test CCSCBCTL, ARRDONE jz return;
fetch_new_scb_done:
and CCSCBCTL, ~(CCARREN|CCSCBEN);
- bmov REG0, SCBPTR, 2;
clr A;
add CMDS_PENDING, 1;
adc CMDS_PENDING[1], A;
@@ -316,43 +313,117 @@
clr SCB_FIFO_USE_COUNT;
/* Update the next SCB address to download. */
bmov NEXT_QUEUED_SCB_ADDR, SCB_NEXT_SCB_BUSADDR, 4;
+ /*
+ * NULL out the SCB links since these fields
+ * occupy the same location as SCB_NEXT_SCB_BUSADDR.
+ */
mvi SCB_NEXT[1], SCB_LIST_NULL;
mvi SCB_NEXT2[1], SCB_LIST_NULL;
/* Increment our position in the QINFIFO. */
mov NONE, SNSCB_QOFF;
+
/*
- * SCBs that want to send messages are always
- * queued independently. This ensures that they
- * are at the head of the SCB list to select out
- * to a target and we will see the MK_MESSAGE flag.
+ * Save SCBID of this SCB in REG0 since
+ * SCBPTR will be clobbered during target
+ * list updates. We also record the SCB's
+ * flags so that we can refer to them even
+ * after SCBPTR has been changed.
*/
- test SCB_CONTROL, MK_MESSAGE jnz first_new_target_scb;
+ bmov REG0, SCBPTR, 2;
+ mov A, SCB_CONTROL;
+
+ /*
+ * Find the tail SCB of the execution queue
+ * for this target.
+ */
shr SINDEX, 3, SCB_SCSIID;
and SINDEX, ~0x1;
mvi SINDEX[1], (WAITING_SCB_TAILS >> 8);
bmov DINDEX, SINDEX, 2;
bmov SCBPTR, SINDIR, 2;
+
+ /*
+ * Update the tail to point to the new SCB.
+ */
bmov DINDIR, REG0, 2;
+
+ /*
+ * If the queue was empty, queue this SCB as
+ * the first for this target.
+ */
cmp SCBPTR[1], SCB_LIST_NULL je first_new_target_scb;
+
+ /*
+ * SCBs that want to send messages must always be
+ * at the head of their per-target queue so that
+ * ATN can be asserted even if the current
+ * negotiation agreement is packetized. If the
+ * target queue is empty, the SCB can be queued
+ * immediately. If the queue is not empty, we must
+ * wait for it to empty before entering this SCB
+ * into the waiting for selection queue. Otherwise
+ * our batching and round-robin selection scheme
+ * could allow commands to be queued out of order.
+ * To simplify the implementation, we stop pulling
+ * new commands from the host until the MK_MESSAGE
+ * SCB can be queued to the waiting for selection
+ * list.
+ */
+ test A, MK_MESSAGE jz batch_scb;
+
+ /*
+ * If the last SCB is also a MK_MESSAGE SCB, then
+ * order is preserved even if we batch.
+ */
+ test SCB_CONTROL, MK_MESSAGE jz batch_scb;
+
+ /*
+ * Defer this SCB and stop fetching new SCBs until
+ * it can be queued. Since the SCB_SCSIID of the
+ * tail SCB must be the same as that of the newly
+ * queued SCB, there is no need to restore the SCBID
+ * here.
+ */
+ or SEQ_FLAGS2, PENDING_MK_MESSAGE;
+ bmov MK_MESSAGE_SCB, REG0, 2;
+ mov MK_MESSAGE_SCSIID, SCB_SCSIID ret;
+
+batch_scb:
+ /*
+ * Otherwise just update the previous tail SCB to
+ * point to the new tail.
+ */
bmov SCB_NEXT, REG0, 2 ret;
+
first_new_target_scb:
+ /*
+ * Append SCB to the tail of the waiting for
+ * selection list.
+ */
cmp WAITING_TID_HEAD[1], SCB_LIST_NULL je first_new_scb;
bmov SCBPTR, WAITING_TID_TAIL, 2;
bmov SCB_NEXT2, REG0, 2;
bmov WAITING_TID_TAIL, REG0, 2 ret;
first_new_scb:
+ /*
+ * Whole list is empty, so the head of
+ * the list must be initialized too.
+ */
bmov WAITING_TID_HEAD, REG0, 2;
bmov WAITING_TID_TAIL, REG0, 2 ret;
END_CRITICAL;
scbdma_idle:
/*
- * Give precedence to downloading new SCBs to execute
- * unless select-outs are currently frozen.
+ * Don't bother downloading new SCBs to execute
+ * if select-outs are currently frozen or we have
+ * a MK_MESSAGE SCB waiting to enter the queue.
*/
- test SEQ_FLAGS2, SELECTOUT_QFROZEN jnz . + 2;
+ test SEQ_FLAGS2, SELECTOUT_QFROZEN|PENDING_MK_MESSAGE
+ jnz scbdma_no_new_scbs;
BEGIN_CRITICAL;
test QOFF_CTLSTA, NEW_SCB_AVAIL jnz fetch_new_scb;
+scbdma_no_new_scbs:
cmp COMPLETE_DMA_SCB_HEAD[1], SCB_LIST_NULL jne dma_complete_scb;
cmp COMPLETE_SCB_HEAD[1], SCB_LIST_NULL je return;
/* FALLTHROUGH */
@@ -671,27 +742,41 @@
}
/*
- * Requeue any SCBs not sent, to the tail of the waiting Q.
+ * The whole list made it. Clear our tail pointer to indicate
+ * that the per-target selection queue is now empty.
*/
- cmp SCB_NEXT[1], SCB_LIST_NULL je select_out_list_done;
+ cmp SCB_NEXT[1], SCB_LIST_NULL je select_out_clear_tail;
/*
+ * Requeue any SCBs not sent, to the tail of the waiting Q.
* We know that neither the per-TID list nor the list of
- * TIDs is empty. Use this knowledge to our advantage.
+ * TIDs is empty. Use this knowledge to our advantage and
+ * queue the remainder to the tail of the global execution
+ * queue.
*/
bmov REG0, SCB_NEXT, 2;
+select_out_queue_remainder:
bmov SCBPTR, WAITING_TID_TAIL, 2;
bmov SCB_NEXT2, REG0, 2;
bmov WAITING_TID_TAIL, REG0, 2;
jmp select_out_inc_tid_q;
-select_out_list_done:
+select_out_clear_tail:
/*
- * The whole list made it. Just clear our TID's tail pointer
- * unless we were queued independently due to our need to
- * send a message.
+ * Queue any pending MK_MESSAGE SCB for this target now
+ * that the queue is empty.
*/
- test SCB_CONTROL, MK_MESSAGE jnz select_out_inc_tid_q;
+ test SEQ_FLAGS2, PENDING_MK_MESSAGE jz select_out_no_mk_message_scb;
+ mov A, MK_MESSAGE_SCSIID;
+ cmp SCB_SCSIID, A jne select_out_no_mk_message_scb;
+ and SEQ_FLAGS2, ~PENDING_MK_MESSAGE;
+ bmov REG0, MK_MESSAGE_SCB, 2;
+ jmp select_out_queue_remainder;
+
+select_out_no_mk_message_scb:
+ /*
+ * Clear this target's execution tail and increment the queue.
+ */
shr DINDEX, 3, SCB_SCSIID;
or DINDEX, 1; /* Want only the second byte */
mvi DINDEX[1], ((WAITING_SCB_TAILS) >> 8);
@@ -703,8 +788,8 @@
mvi WAITING_TID_TAIL[1], SCB_LIST_NULL;
bmov SCBPTR, CURRSCB, 2;
mvi CLRSINT0, CLRSELDO;
- test LQOSTAT2, LQOPHACHGOUTPKT jnz unexpected_nonpkt_phase;
- test LQOSTAT1, LQOPHACHGINPKT jnz unexpected_nonpkt_phase;
+ test LQOSTAT2, LQOPHACHGOUTPKT jnz unexpected_nonpkt_mode_cleared;
+ test LQOSTAT1, LQOPHACHGINPKT jnz unexpected_nonpkt_mode_cleared;
/*
* If this is a packetized connection, return to our
@@ -2127,6 +2212,18 @@
mvi DFFSXFRCTL, CLRCHN;
unexpected_nonpkt_mode_cleared:
mvi CLRSINT2, CLRNONPACKREQ;
+ if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) {
+ /*
+ * Test to ensure that the bus has not
+ * already gone free prior to clearing
+ * any stale busfree status. This avoids
+ * a window whereby a busfree just after
+ * a selection could be missed.
+ */
+ test SCSISIGI, BSYI jz . + 2;
+ mvi CLRSINT1,CLRBUSFREE;
+ or SIMODE1, ENBUSFREE;
+ }
test SCSIPHASE, ~(MSG_IN_PHASE|MSG_OUT_PHASE) jnz illegal_phase;
SET_SEQINTCODE(ENTERING_NONPACK)
jmp ITloop;
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index db8f5ce..342f779 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -37,7 +37,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#247 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#250 $
*/
#ifdef __linux__
@@ -197,7 +197,8 @@
char channel, int lun, u_int tag,
role_t role, uint32_t status,
ahd_search_action action,
- u_int *list_head, u_int tid);
+ u_int *list_head, u_int *list_tail,
+ u_int tid);
static void ahd_stitch_tid_list(struct ahd_softc *ahd,
u_int tid_prev, u_int tid_cur,
u_int tid_next);
@@ -1660,7 +1661,8 @@
* so just clear the error.
*/
ahd_outb(ahd, CLRLQIINT1, CLRLQICRCI_NLQ);
- } else if ((status & BUSFREE) != 0) {
+ } else if ((status & BUSFREE) != 0
+ || (lqistat1 & LQOBUSFREE) != 0) {
u_int lqostat1;
int restart;
int clear_fifo;
@@ -2025,10 +2027,6 @@
u_int waiting_t;
u_int next;
- if ((busfreetime & BUSFREE_LQO) == 0)
- printf("%s: Warning, BUSFREE time is 0x%x. "
- "Expected BUSFREE_LQO.\n",
- ahd_name(ahd), busfreetime);
/*
* The LQO manager detected an unexpected busfree
* either:
@@ -2251,8 +2249,14 @@
struct ahd_tmode_tstate *tstate;
/*
- * PPR Rejected. Try non-ppr negotiation
- * and retry command.
+ * PPR Rejected.
+ *
+ * If the previous negotiation was packetized,
+ * this could be because the device has been
+ * reset without our knowledge. Force our
+ * current negotiation to async and retry the
+ * negotiation. Otherwise retry the command
+ * with non-ppr negotiation.
*/
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
@@ -2261,11 +2265,34 @@
tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
- tinfo->curr.transport_version = 2;
- tinfo->goal.transport_version = 2;
- tinfo->goal.ppr_options = 0;
- ahd_qinfifo_requeue_tail(ahd, scb);
- printerror = 0;
+ if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ)!=0) {
+ ahd_set_width(ahd, &devinfo,
+ MSG_EXT_WDTR_BUS_8_BIT,
+ AHD_TRANS_CUR,
+ /*paused*/TRUE);
+ ahd_set_syncrate(ahd, &devinfo,
+ /*period*/0, /*offset*/0,
+ /*ppr_options*/0,
+ AHD_TRANS_CUR,
+ /*paused*/TRUE);
+ /*
+ * The expect PPR busfree handler below
+ * will effect the retry and necessary
+ * abort.
+ */
+ } else {
+ tinfo->curr.transport_version = 2;
+ tinfo->goal.transport_version = 2;
+ tinfo->goal.ppr_options = 0;
+ /*
+ * Remove any SCBs in the waiting for selection
+ * queue that may also be for this target so
+ * that command ordering is preserved.
+ */
+ ahd_freeze_devq(ahd, scb);
+ ahd_qinfifo_requeue_tail(ahd, scb);
+ printerror = 0;
+ }
} else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE)
&& ppr_busfree == 0) {
/*
@@ -2280,6 +2307,12 @@
MSG_EXT_WDTR_BUS_8_BIT,
AHD_TRANS_CUR|AHD_TRANS_GOAL,
/*paused*/TRUE);
+ /*
+ * Remove any SCBs in the waiting for selection
+ * queue that may also be for this target so that
+ * command ordering is preserved.
+ */
+ ahd_freeze_devq(ahd, scb);
ahd_qinfifo_requeue_tail(ahd, scb);
printerror = 0;
} else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE)
@@ -2297,6 +2330,12 @@
/*ppr_options*/0,
AHD_TRANS_CUR|AHD_TRANS_GOAL,
/*paused*/TRUE);
+ /*
+ * Remove any SCBs in the waiting for selection
+ * queue that may also be for this target so that
+ * command ordering is preserved.
+ */
+ ahd_freeze_devq(ahd, scb);
ahd_qinfifo_requeue_tail(ahd, scb);
printerror = 0;
} else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0
@@ -2369,14 +2408,14 @@
*/
printf("%s: ", ahd_name(ahd));
}
- if (lastphase != P_BUSFREE)
- ahd_force_renegotiation(ahd, &devinfo);
printf("Unexpected busfree %s, %d SCBs aborted, "
"PRGMCNT == 0x%x\n",
ahd_lookup_phase_entry(lastphase)->phasemsg,
aborted,
ahd_inw(ahd, PRGMCNT));
ahd_dump_card_state(ahd);
+ if (lastphase != P_BUSFREE)
+ ahd_force_renegotiation(ahd, &devinfo);
}
/* Always restart the sequencer. */
return (1);
@@ -3293,6 +3332,15 @@
con_opts |= WIDEXFER;
/*
+ * Slow down our CRC interval to be
+ * compatible with packetized U320 devices
+ * that can't handle a CRC at full speed
+ */
+ if (ahd->features & AHD_AIC79XXB_SLOWCRC) {
+ con_opts |= ENSLOWCRC;
+ }
+
+ /*
* During packetized transfers, the target will
* give us the oportunity to send command packets
* without us asserting attention.
@@ -3315,7 +3363,6 @@
{
struct scb *pending_scb;
int pending_scb_count;
- u_int scb_tag;
int paused;
u_int saved_scbptr;
ahd_mode_state saved_modes;
@@ -3333,7 +3380,6 @@
pending_scb_count = 0;
LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
struct ahd_devinfo devinfo;
- struct hardware_scb *pending_hscb;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
@@ -3341,11 +3387,10 @@
tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
- pending_hscb = pending_scb->hscb;
if ((tstate->auto_negotiate & devinfo.target_mask) == 0
&& (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) {
pending_scb->flags &= ~SCB_AUTO_NEGOTIATE;
- pending_hscb->control &= ~MK_MESSAGE;
+ pending_scb->hscb->control &= ~MK_MESSAGE;
}
ahd_sync_scb(ahd, pending_scb,
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
@@ -3377,18 +3422,15 @@
ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
saved_scbptr = ahd_get_scbptr(ahd);
/* Ensure that the hscbs down on the card match the new information */
- for (scb_tag = 0; scb_tag < ahd->scb_data.maxhscbs; scb_tag++) {
- struct hardware_scb *pending_hscb;
+ LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
+ u_int scb_tag;
u_int control;
- pending_scb = ahd_lookup_scb(ahd, scb_tag);
- if (pending_scb == NULL)
- continue;
+ scb_tag = SCB_GET_TAG(pending_scb);
ahd_set_scbptr(ahd, scb_tag);
- pending_hscb = pending_scb->hscb;
control = ahd_inb_scbram(ahd, SCB_CONTROL);
control &= ~MK_MESSAGE;
- control |= pending_hscb->control & MK_MESSAGE;
+ control |= pending_scb->hscb->control & MK_MESSAGE;
ahd_outb(ahd, SCB_CONTROL, control);
}
ahd_set_scbptr(ahd, saved_scbptr);
@@ -6500,13 +6542,14 @@
| ENLQIOVERI_LQ|ENLQIOVERI_NLQ);
ahd_outb(ahd, LQOMODE0, ENLQOATNLQ|ENLQOATNPKT|ENLQOTCRC);
/*
- * An interrupt from LQOBUSFREE is made redundant by the
- * BUSFREE interrupt. We choose to have the sequencer catch
- * LQOPHCHGINPKT errors manually for the command phase at the
- * start of a packetized selection case.
- ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE|ENLQOPHACHGINPKT);
+ * We choose to have the sequencer catch LQOPHCHGINPKT errors
+ * manually for the command phase at the start of a packetized
+ * selection case. ENLQOBUSFREE should be made redundant by
+ * the BUSFREE interrupt, but it seems that some LQOBUSFREE
+ * events fail to assert the BUSFREE interrupt so we must
+ * also enable LQOBUSFREE interrupts.
*/
- ahd_outb(ahd, LQOMODE1, 0);
+ ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE);
/*
* Setup sequencer interrupt handlers.
@@ -6617,6 +6660,8 @@
/* We don't have any waiting selections */
ahd_outw(ahd, WAITING_TID_HEAD, SCB_LIST_NULL);
ahd_outw(ahd, WAITING_TID_TAIL, SCB_LIST_NULL);
+ ahd_outw(ahd, MK_MESSAGE_SCB, SCB_LIST_NULL);
+ ahd_outw(ahd, MK_MESSAGE_SCSIID, 0xFF);
for (i = 0; i < AHD_NUM_TARGETS; i++)
ahd_outw(ahd, WAITING_SCB_TAILS + (2 * i), SCB_LIST_NULL);
@@ -6704,6 +6749,18 @@
ahd_loadseq(ahd);
ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
+
+ if (ahd->features & AHD_AIC79XXB_SLOWCRC) {
+ u_int negodat3 = ahd_inb(ahd, NEGCONOPTS);
+
+ negodat3 |= ENSLOWCRC;
+ ahd_outb(ahd, NEGCONOPTS, negodat3);
+ negodat3 = ahd_inb(ahd, NEGCONOPTS);
+ if (!(negodat3 & ENSLOWCRC))
+ printf("aic79xx: failed to set the SLOWCRC bit\n");
+ else
+ printf("aic79xx: SLOWCRC bit set\n");
+ }
}
/*
@@ -7260,12 +7317,28 @@
ahd->flags &= ~AHD_UPDATE_PEND_CMDS;
}
+void
+ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status)
+{
+ cam_status ostat;
+ cam_status cstat;
+
+ ostat = ahd_get_transaction_status(scb);
+ if (ostat == CAM_REQ_INPROG)
+ ahd_set_transaction_status(scb, status);
+ cstat = ahd_get_transaction_status(scb);
+ if (cstat != CAM_REQ_CMP)
+ ahd_freeze_scb(scb);
+ ahd_done(ahd, scb);
+}
+
int
ahd_search_qinfifo(struct ahd_softc *ahd, int target, char channel,
int lun, u_int tag, role_t role, uint32_t status,
ahd_search_action action)
{
struct scb *scb;
+ struct scb *mk_msg_scb;
struct scb *prev_scb;
ahd_mode_state saved_modes;
u_int qinstart;
@@ -7274,6 +7347,7 @@
u_int tid_next;
u_int tid_prev;
u_int scbid;
+ u_int seq_flags2;
u_int savedscbptr;
uint32_t busaddr;
int found;
@@ -7329,23 +7403,10 @@
found++;
switch (action) {
case SEARCH_COMPLETE:
- {
- cam_status ostat;
- cam_status cstat;
-
- ostat = ahd_get_transaction_status(scb);
- if (ostat == CAM_REQ_INPROG)
- ahd_set_transaction_status(scb,
- status);
- cstat = ahd_get_transaction_status(scb);
- if (cstat != CAM_REQ_CMP)
- ahd_freeze_scb(scb);
if ((scb->flags & SCB_ACTIVE) == 0)
printf("Inactive SCB in qinfifo\n");
- ahd_done(ahd, scb);
-
+ ahd_done_with_status(ahd, scb, status);
/* FALLTHROUGH */
- }
case SEARCH_REMOVE:
break;
case SEARCH_PRINT:
@@ -7375,21 +7436,24 @@
* looking for matches.
*/
ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
+ seq_flags2 = ahd_inb(ahd, SEQ_FLAGS2);
+ if ((seq_flags2 & PENDING_MK_MESSAGE) != 0) {
+ scbid = ahd_inw(ahd, MK_MESSAGE_SCB);
+ mk_msg_scb = ahd_lookup_scb(ahd, scbid);
+ } else
+ mk_msg_scb = NULL;
savedscbptr = ahd_get_scbptr(ahd);
tid_next = ahd_inw(ahd, WAITING_TID_HEAD);
tid_prev = SCB_LIST_NULL;
targets = 0;
for (scbid = tid_next; !SCBID_IS_NULL(scbid); scbid = tid_next) {
u_int tid_head;
+ u_int tid_tail;
- /*
- * We limit based on the number of SCBs since
- * MK_MESSAGE SCBs are not in the per-tid lists.
- */
targets++;
- if (targets > AHD_SCB_MAX) {
+ if (targets > AHD_NUM_TARGETS)
panic("TID LIST LOOP");
- }
+
if (scbid >= ahd->scb_data.numscbs) {
printf("%s: Waiting TID List inconsistency. "
"SCB index == 0x%x, yet numscbs == 0x%x.",
@@ -7419,8 +7483,71 @@
tid_head = scbid;
found += ahd_search_scb_list(ahd, target, channel,
lun, tag, role, status,
- action, &tid_head,
+ action, &tid_head, &tid_tail,
SCB_GET_TARGET(ahd, scb));
+ /*
+ * Check any MK_MESSAGE SCB that is still waiting to
+ * enter this target's waiting for selection queue.
+ */
+ if (mk_msg_scb != NULL
+ && ahd_match_scb(ahd, mk_msg_scb, target, channel,
+ lun, tag, role)) {
+
+ /*
+ * We found an scb that needs to be acted on.
+ */
+ found++;
+ switch (action) {
+ case SEARCH_COMPLETE:
+ if ((mk_msg_scb->flags & SCB_ACTIVE) == 0)
+ printf("Inactive SCB pending MK_MSG\n");
+ ahd_done_with_status(ahd, mk_msg_scb, status);
+ /* FALLTHROUGH */
+ case SEARCH_REMOVE:
+ {
+ u_int tail_offset;
+
+ printf("Removing MK_MSG scb\n");
+
+ /*
+ * Reset our tail to the tail of the
+ * main per-target list.
+ */
+ tail_offset = WAITING_SCB_TAILS
+ + (2 * SCB_GET_TARGET(ahd, mk_msg_scb));
+ ahd_outw(ahd, tail_offset, tid_tail);
+
+ seq_flags2 &= ~PENDING_MK_MESSAGE;
+ ahd_outb(ahd, SEQ_FLAGS2, seq_flags2);
+ ahd_outw(ahd, CMDS_PENDING,
+ ahd_inw(ahd, CMDS_PENDING)-1);
+ mk_msg_scb = NULL;
+ break;
+ }
+ case SEARCH_PRINT:
+ printf(" 0x%x", SCB_GET_TAG(scb));
+ /* FALLTHROUGH */
+ case SEARCH_COUNT:
+ break;
+ }
+ }
+
+ if (mk_msg_scb != NULL
+ && SCBID_IS_NULL(tid_head)
+ && ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD,
+ SCB_LIST_NULL, ROLE_UNKNOWN)) {
+
+ /*
+ * When removing the last SCB for a target
+ * queue with a pending MK_MESSAGE scb, we
+ * must queue the MK_MESSAGE scb.
+ */
+ printf("Queueing mk_msg_scb\n");
+ tid_head = ahd_inw(ahd, MK_MESSAGE_SCB);
+ seq_flags2 &= ~PENDING_MK_MESSAGE;
+ ahd_outb(ahd, SEQ_FLAGS2, seq_flags2);
+ mk_msg_scb = NULL;
+ }
if (tid_head != scbid)
ahd_stitch_tid_list(ahd, tid_prev, tid_head, tid_next);
if (!SCBID_IS_NULL(tid_head))
@@ -7428,6 +7555,8 @@
if (action == SEARCH_PRINT)
printf(")\n");
}
+
+ /* Restore saved state. */
ahd_set_scbptr(ahd, savedscbptr);
ahd_restore_modes(ahd, saved_modes);
return (found);
@@ -7436,7 +7565,8 @@
static int
ahd_search_scb_list(struct ahd_softc *ahd, int target, char channel,
int lun, u_int tag, role_t role, uint32_t status,
- ahd_search_action action, u_int *list_head, u_int tid)
+ ahd_search_action action, u_int *list_head,
+ u_int *list_tail, u_int tid)
{
struct scb *scb;
u_int scbid;
@@ -7448,6 +7578,7 @@
found = 0;
prev = SCB_LIST_NULL;
next = *list_head;
+ *list_tail = SCB_LIST_NULL;
for (scbid = next; !SCBID_IS_NULL(scbid); scbid = next) {
if (scbid >= ahd->scb_data.numscbs) {
printf("%s:SCB List inconsistency. "
@@ -7463,6 +7594,7 @@
panic("Waiting List traversal\n");
}
ahd_set_scbptr(ahd, scbid);
+ *list_tail = scbid;
next = ahd_inw_scbram(ahd, SCB_NEXT);
if (ahd_match_scb(ahd, scb, target, channel,
lun, SCB_LIST_NULL, role) == 0) {
@@ -7472,24 +7604,14 @@
found++;
switch (action) {
case SEARCH_COMPLETE:
- {
- cam_status ostat;
- cam_status cstat;
-
- ostat = ahd_get_transaction_status(scb);
- if (ostat == CAM_REQ_INPROG)
- ahd_set_transaction_status(scb, status);
- cstat = ahd_get_transaction_status(scb);
- if (cstat != CAM_REQ_CMP)
- ahd_freeze_scb(scb);
if ((scb->flags & SCB_ACTIVE) == 0)
printf("Inactive SCB in Waiting List\n");
- ahd_done(ahd, scb);
+ ahd_done_with_status(ahd, scb, status);
/* FALLTHROUGH */
- }
case SEARCH_REMOVE:
ahd_rem_wscb(ahd, scbid, prev, next, tid);
- if (prev == SCB_LIST_NULL)
+ *list_tail = prev;
+ if (SCBID_IS_NULL(prev))
*list_head = next;
break;
case SEARCH_PRINT:
@@ -7558,14 +7680,17 @@
}
/*
- * SCBs that had MK_MESSAGE set in them will not
- * be queued to the per-target lists, so don't
- * blindly clear the tail pointer.
+ * SCBs that have MK_MESSAGE set in them may
+ * cause the tail pointer to be updated without
+ * setting the next pointer of the previous tail.
+ * Only clear the tail if the removed SCB was
+ * the tail.
*/
tail_offset = WAITING_SCB_TAILS + (2 * tid);
if (SCBID_IS_NULL(next)
&& ahd_inw(ahd, tail_offset) == scbid)
ahd_outw(ahd, tail_offset, prev);
+
ahd_add_scb_to_free_list(ahd, scbid);
return (next);
}
@@ -8148,11 +8273,6 @@
ahd_setup_data_scb(ahd, scb);
scb->flags |= SCB_SENSE;
ahd_queue_scb(ahd, scb);
- /*
- * Ensure we have enough time to actually
- * retrieve the sense.
- */
- ahd_scb_timer_reset(scb, 5 * 1000000);
break;
}
case SCSI_STATUS_OK:
@@ -8793,6 +8913,9 @@
* Mode independent registers.
*/
cur_col = 0;
+ ahd_intstat_print(ahd_inb(ahd, INTSTAT), &cur_col, 50);
+ ahd_seloid_print(ahd_inb(ahd, SELOID), &cur_col, 50);
+ ahd_selid_print(ahd_inb(ahd, SELID), &cur_col, 50);
ahd_hs_mailbox_print(ahd_inb(ahd, LOCAL_HS_MAILBOX), &cur_col, 50);
ahd_intctl_print(ahd_inb(ahd, INTCTL), &cur_col, 50);
ahd_seqintstat_print(ahd_inb(ahd, SEQINTSTAT), &cur_col, 50);
@@ -8808,6 +8931,12 @@
ahd_seqintctl_print(ahd_inb(ahd, SEQINTCTL), &cur_col, 50);
ahd_seq_flags_print(ahd_inb(ahd, SEQ_FLAGS), &cur_col, 50);
ahd_seq_flags2_print(ahd_inb(ahd, SEQ_FLAGS2), &cur_col, 50);
+ ahd_qfreeze_count_print(ahd_inw(ahd, QFREEZE_COUNT), &cur_col, 50);
+ ahd_kernel_qfreeze_count_print(ahd_inw(ahd, KERNEL_QFREEZE_COUNT),
+ &cur_col, 50);
+ ahd_mk_message_scb_print(ahd_inw(ahd, MK_MESSAGE_SCB), &cur_col, 50);
+ ahd_mk_message_scsiid_print(ahd_inb(ahd, MK_MESSAGE_SCSIID),
+ &cur_col, 50);
ahd_sstat0_print(ahd_inb(ahd, SSTAT0), &cur_col, 50);
ahd_sstat1_print(ahd_inb(ahd, SSTAT1), &cur_col, 50);
ahd_sstat2_print(ahd_inb(ahd, SSTAT2), &cur_col, 50);
@@ -8915,7 +9044,7 @@
ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i);
fifo_scbptr = ahd_get_scbptr(ahd);
- printf("\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n",
+ printf("\n\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n",
ahd_name(ahd), i,
(dffstat & (FIFO0FREE << i)) ? "Free" : "Active",
ahd_inw(ahd, LONGJMP_ADDR), fifo_scbptr);
@@ -8970,6 +9099,9 @@
printf("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n",
ahd_name(ahd), ahd_inb(ahd, OS_SPACE_CNT),
ahd_inb(ahd, MAXCMDCNT));
+ printf("%s: SAVED_SCSIID = 0x%x SAVED_LUN = 0x%x\n",
+ ahd_name(ahd), ahd_inb(ahd, SAVED_SCSIID),
+ ahd_inb(ahd, SAVED_LUN));
ahd_simode0_print(ahd_inb(ahd, SIMODE0), &cur_col, 50);
printf("\n");
ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
diff --git a/drivers/scsi/aic7xxx/aic79xx_inline.h b/drivers/scsi/aic7xxx/aic79xx_inline.h
index 91c4f7f..8ad3ce9 100644
--- a/drivers/scsi/aic7xxx/aic79xx_inline.h
+++ b/drivers/scsi/aic7xxx/aic79xx_inline.h
@@ -37,7 +37,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx_inline.h#58 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx_inline.h#59 $
*
* $FreeBSD$
*/
@@ -804,9 +804,10 @@
uint64_t host_dataptr;
host_dataptr = ahd_le64toh(scb->hscb->dataptr);
- printf("%s: Queueing SCB 0x%x bus addr 0x%x - 0x%x%x/0x%x\n",
+ printf("%s: Queueing SCB %d:0x%x bus addr 0x%x - 0x%x%x/0x%x\n",
ahd_name(ahd),
- SCB_GET_TAG(scb), ahd_le32toh(scb->hscb->hscb_busaddr),
+ SCB_GET_TAG(scb), scb->hscb->scsiid,
+ ahd_le32toh(scb->hscb->hscb_busaddr),
(u_int)((host_dataptr >> 32) & 0xFFFFFFFF),
(u_int)(host_dataptr & 0xFFFFFFFF),
ahd_le32toh(scb->hscb->datacnt));
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 2567e29..7254ea5 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -314,6 +314,21 @@
*/
uint32_t aic79xx_periodic_otag;
+/* Some storage boxes are using an LSI chip which has a bug making it
+ * impossible to use aic79xx Rev B chip in 320 speeds. The following
+ * storage boxes have been reported to be buggy:
+ * EonStor 3U 16-Bay: U16U-G3A3
+ * EonStor 2U 12-Bay: U12U-G3A3
+ * SentinelRAID: 2500F R5 / R6
+ * SentinelRAID: 2500F R1
+ * SentinelRAID: 2500F/1500F
+ * SentinelRAID: 150F
+ *
+ * To get around this LSI bug, you can set your board to 160 mode
+ * or you can enable the SLOWCRC bit.
+ */
+uint32_t aic79xx_slowcrc;
+
/*
* Module information and settable options.
*/
@@ -343,6 +358,7 @@
" amplitude:<int> Set the signal amplitude (0-7).\n"
" seltime:<int> Selection Timeout:\n"
" (0/256ms,1/128ms,2/64ms,3/32ms)\n"
+" slowcrc Turn on the SLOWCRC bit (Rev B only)\n"
"\n"
" Sample /etc/modprobe.conf line:\n"
" Enable verbose logging\n"
@@ -1003,6 +1019,7 @@
{ "slewrate", NULL },
{ "precomp", NULL },
{ "amplitude", NULL },
+ { "slowcrc", &aic79xx_slowcrc },
};
end = strchr(s, '\0');
@@ -1072,7 +1089,6 @@
return (ENOMEM);
*((struct ahd_softc **)host->hostdata) = ahd;
- ahd_lock(ahd, &s);
ahd->platform_data->host = host;
host->can_queue = AHD_MAX_QUEUE;
host->cmd_per_lun = 2;
@@ -1083,7 +1099,9 @@
host->max_lun = AHD_NUM_LUNS;
host->max_channel = 0;
host->sg_tablesize = AHD_NSEG;
+ ahd_lock(ahd, &s);
ahd_set_unit(ahd, ahd_linux_unit++);
+ ahd_unlock(ahd, &s);
sprintf(buf, "scsi%d", host->host_no);
new_name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT);
if (new_name != NULL) {
@@ -1093,7 +1111,6 @@
host->unique_id = ahd->unit;
ahd_linux_initialize_scsi_bus(ahd);
ahd_intr_enable(ahd, TRUE);
- ahd_unlock(ahd, &s);
host->transportt = ahd_linux_transport_template;
@@ -1127,6 +1144,7 @@
{
u_int target_id;
u_int numtarg;
+ unsigned long s;
target_id = 0;
numtarg = 0;
@@ -1139,6 +1157,8 @@
else
numtarg = (ahd->features & AHD_WIDE) ? 16 : 8;
+ ahd_lock(ahd, &s);
+
/*
* Force negotiation to async for all targets that
* will not see an initial bus reset.
@@ -1155,16 +1175,12 @@
ahd_update_neg_request(ahd, &devinfo, tstate,
tinfo, AHD_NEG_ALWAYS);
}
+ ahd_unlock(ahd, &s);
/* Give the bus some time to recover */
if ((ahd->flags & AHD_RESET_BUS_A) != 0) {
ahd_freeze_simq(ahd);
- init_timer(&ahd->platform_data->reset_timer);
- ahd->platform_data->reset_timer.data = (u_long)ahd;
- ahd->platform_data->reset_timer.expires =
- jiffies + (AIC79XX_RESET_DELAY * HZ)/1000;
- ahd->platform_data->reset_timer.function =
- (ahd_linux_callback_t *)ahd_release_simq;
- add_timer(&ahd->platform_data->reset_timer);
+ msleep(AIC79XX_RESET_DELAY);
+ ahd_release_simq(ahd);
}
}
@@ -2033,6 +2049,9 @@
void
ahd_freeze_simq(struct ahd_softc *ahd)
{
+ unsigned long s;
+
+ ahd_lock(ahd, &s);
ahd->platform_data->qfrozen++;
if (ahd->platform_data->qfrozen == 1) {
scsi_block_requests(ahd->platform_data->host);
@@ -2040,6 +2059,7 @@
CAM_LUN_WILDCARD, SCB_LIST_NULL,
ROLE_INITIATOR, CAM_REQUEUE_REQ);
}
+ ahd_unlock(ahd, &s);
}
void
@@ -2344,8 +2364,9 @@
ahd_name(ahd), dev->active);
retval = FAILED;
}
- }
- ahd_unlock(ahd, &flags);
+ } else
+ ahd_unlock(ahd, &flags);
+
return (retval);
}
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.h b/drivers/scsi/aic7xxx/aic79xx_osm.h
index cb74fcc..9cb1013 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.h
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.h
@@ -36,7 +36,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.h#137 $
+ * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.h#166 $
*
*/
#ifndef _AIC79XX_LINUX_H_
@@ -228,7 +228,6 @@
typedef void ahd_linux_callback_t (u_long);
static __inline void ahd_timer_reset(ahd_timer_t *timer, int usec,
ahd_callback_t *func, void *arg);
-static __inline void ahd_scb_timer_reset(struct scb *scb, u_int usec);
static __inline void
ahd_timer_reset(ahd_timer_t *timer, int usec, ahd_callback_t *func, void *arg)
@@ -243,12 +242,6 @@
add_timer(timer);
}
-static __inline void
-ahd_scb_timer_reset(struct scb *scb, u_int usec)
-{
- mod_timer(&scb->io_ctx->eh_timeout, jiffies + (usec * HZ)/1000000);
-}
-
/***************************** SMP support ************************************/
#include <linux/spinlock.h>
@@ -389,7 +382,6 @@
spinlock_t spin_lock;
u_int qfrozen;
- struct timer_list reset_timer;
struct semaphore eh_sem;
struct Scsi_Host *host; /* pointer to scsi host */
#define AHD_LINUX_NOIRQ ((uint32_t)~0)
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
index bf360ae..ebbf7e4 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
@@ -220,10 +220,10 @@
*base2 = pci_resource_start(ahd->dev_softc, 3);
if (*base == 0 || *base2 == 0)
return (ENOMEM);
- if (request_region(*base, 256, "aic79xx") == 0)
+ if (!request_region(*base, 256, "aic79xx"))
return (ENOMEM);
- if (request_region(*base2, 256, "aic79xx") == 0) {
- release_region(*base2, 256);
+ if (!request_region(*base2, 256, "aic79xx")) {
+ release_region(*base, 256);
return (ENOMEM);
}
return (0);
@@ -237,7 +237,7 @@
u_long start;
u_long base_page;
u_long base_offset;
- int error;
+ int error = 0;
if (aic79xx_allow_memio == 0)
return (ENOMEM);
@@ -245,16 +245,15 @@
if ((ahd->bugs & AHD_PCIX_MMAPIO_BUG) != 0)
return (ENOMEM);
- error = 0;
start = pci_resource_start(ahd->dev_softc, 1);
base_page = start & PAGE_MASK;
base_offset = start - base_page;
if (start != 0) {
*bus_addr = start;
- if (request_mem_region(start, 0x1000, "aic79xx") == 0)
+ if (!request_mem_region(start, 0x1000, "aic79xx"))
error = ENOMEM;
- if (error == 0) {
- *maddr = ioremap_nocache(base_page, base_offset + 256);
+ if (!error) {
+ *maddr = ioremap_nocache(base_page, base_offset + 512);
if (*maddr == NULL) {
error = ENOMEM;
release_mem_region(start, 0x1000);
@@ -344,7 +343,7 @@
error = request_irq(ahd->dev_softc->irq, ahd_linux_isr,
SA_SHIRQ, "aic79xx", ahd);
- if (error == 0)
+ if (!error)
ahd->platform_data->irq = ahd->dev_softc->irq;
return (-error);
diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c
index 196a634..757242e5 100644
--- a/drivers/scsi/aic7xxx/aic79xx_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_pci.c
@@ -38,7 +38,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#89 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#92 $
*/
#ifdef __linux__
@@ -950,12 +950,19 @@
if ((ahd->flags & AHD_HP_BOARD) == 0)
AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVA);
} else {
+ /* This is revision B and newer. */
+ extern uint32_t aic79xx_slowcrc;
u_int devconfig1;
ahd->features |= AHD_RTI|AHD_NEW_IOCELL_OPTS
- | AHD_NEW_DFCNTRL_OPTS|AHD_FAST_CDB_DELIVERY;
+ | AHD_NEW_DFCNTRL_OPTS|AHD_FAST_CDB_DELIVERY
+ | AHD_BUSFREEREV_BUG;
ahd->bugs |= AHD_LQOOVERRUN_BUG|AHD_EARLY_REQ_BUG;
+ /* If the user requested the the SLOWCRC bit to be set. */
+ if (aic79xx_slowcrc)
+ ahd->features |= AHD_AIC79XXB_SLOWCRC;
+
/*
* Some issues have been resolved in the 7901B.
*/
diff --git a/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped b/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped
index 8763b15..2068e00 100644
--- a/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped
+++ b/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped
@@ -2,8 +2,8 @@
* DO NOT EDIT - This file is automatically generated
* from the following source files:
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#119 $
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#76 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#120 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#77 $
*/
typedef int (ahd_reg_print_t)(u_int, u_int *, u_int);
typedef struct ahd_reg_parse_entry {
@@ -2204,6 +2204,20 @@
#endif
#if AIC_DEBUG_REGISTERS
+ahd_reg_print_t ahd_mk_message_scb_print;
+#else
+#define ahd_mk_message_scb_print(regvalue, cur_col, wrap) \
+ ahd_print_register(NULL, 0, "MK_MESSAGE_SCB", 0x160, regvalue, cur_col, wrap)
+#endif
+
+#if AIC_DEBUG_REGISTERS
+ahd_reg_print_t ahd_mk_message_scsiid_print;
+#else
+#define ahd_mk_message_scsiid_print(regvalue, cur_col, wrap) \
+ ahd_print_register(NULL, 0, "MK_MESSAGE_SCSIID", 0x162, regvalue, cur_col, wrap)
+#endif
+
+#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_scb_base_print;
#else
#define ahd_scb_base_print(regvalue, cur_col, wrap) \
@@ -3638,6 +3652,7 @@
#define SEQ_FLAGS2 0x14d
#define SELECTOUT_QFROZEN 0x04
#define TARGET_MSG_PENDING 0x02
+#define PENDING_MK_MESSAGE 0x01
#define ALLOCFIFO_SCBPTR 0x14e
@@ -3655,6 +3670,10 @@
#define CMDSIZE_TABLE 0x158
+#define MK_MESSAGE_SCB 0x160
+
+#define MK_MESSAGE_SCSIID 0x162
+
#define SCB_BASE 0x180
#define SCB_RESIDUAL_DATACNT 0x180
@@ -3800,5 +3819,5 @@
/* Exported Labels */
-#define LABEL_seq_isr 0x285
-#define LABEL_timer_isr 0x281
+#define LABEL_seq_isr 0x28f
+#define LABEL_timer_isr 0x28b
diff --git a/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped b/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped
index a4137c9..db38a61 100644
--- a/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped
+++ b/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped
@@ -2,8 +2,8 @@
* DO NOT EDIT - This file is automatically generated
* from the following source files:
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#118 $
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#75 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#120 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#77 $
*/
#include "aic79xx_osm.h"
@@ -3382,6 +3382,7 @@
}
static ahd_reg_parse_entry_t SEQ_FLAGS2_parse_table[] = {
+ { "PENDING_MK_MESSAGE", 0x01, 0x01 },
{ "TARGET_MSG_PENDING", 0x02, 0x02 },
{ "SELECTOUT_QFROZEN", 0x04, 0x04 }
};
@@ -3389,7 +3390,7 @@
int
ahd_seq_flags2_print(u_int regvalue, u_int *cur_col, u_int wrap)
{
- return (ahd_print_register(SEQ_FLAGS2_parse_table, 2, "SEQ_FLAGS2",
+ return (ahd_print_register(SEQ_FLAGS2_parse_table, 3, "SEQ_FLAGS2",
0x14d, regvalue, cur_col, wrap));
}
@@ -3450,6 +3451,20 @@
}
int
+ahd_mk_message_scb_print(u_int regvalue, u_int *cur_col, u_int wrap)
+{
+ return (ahd_print_register(NULL, 0, "MK_MESSAGE_SCB",
+ 0x160, regvalue, cur_col, wrap));
+}
+
+int
+ahd_mk_message_scsiid_print(u_int regvalue, u_int *cur_col, u_int wrap)
+{
+ return (ahd_print_register(NULL, 0, "MK_MESSAGE_SCSIID",
+ 0x162, regvalue, cur_col, wrap));
+}
+
+int
ahd_scb_base_print(u_int regvalue, u_int *cur_col, u_int wrap)
{
return (ahd_print_register(NULL, 0, "SCB_BASE",
diff --git a/drivers/scsi/aic7xxx/aic79xx_seq.h_shipped b/drivers/scsi/aic7xxx/aic79xx_seq.h_shipped
index b1e5365..11bed07 100644
--- a/drivers/scsi/aic7xxx/aic79xx_seq.h_shipped
+++ b/drivers/scsi/aic7xxx/aic79xx_seq.h_shipped
@@ -2,17 +2,17 @@
* DO NOT EDIT - This file is automatically generated
* from the following source files:
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#119 $
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#76 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#120 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#77 $
*/
static uint8_t seqprog[] = {
0xff, 0x02, 0x06, 0x78,
- 0x00, 0xea, 0x64, 0x59,
+ 0x00, 0xea, 0x6e, 0x59,
0x01, 0xea, 0x04, 0x30,
0xff, 0x04, 0x0c, 0x78,
- 0x19, 0xea, 0x64, 0x59,
+ 0x19, 0xea, 0x6e, 0x59,
0x19, 0xea, 0x04, 0x00,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
0x60, 0x3a, 0x3a, 0x68,
0x04, 0x4d, 0x35, 0x78,
@@ -33,15 +33,15 @@
0xff, 0xea, 0x62, 0x02,
0x00, 0xe2, 0x3a, 0x40,
0xff, 0x21, 0x3b, 0x70,
- 0x40, 0x4b, 0xaa, 0x69,
- 0x00, 0xe2, 0x68, 0x59,
- 0x40, 0x4b, 0xaa, 0x69,
- 0x20, 0x4b, 0x96, 0x69,
+ 0x40, 0x4b, 0xb4, 0x69,
+ 0x00, 0xe2, 0x72, 0x59,
+ 0x40, 0x4b, 0xb4, 0x69,
+ 0x20, 0x4b, 0xa0, 0x69,
0xfc, 0x42, 0x44, 0x78,
0x10, 0x40, 0x44, 0x78,
- 0x00, 0xe2, 0xfc, 0x5d,
+ 0x00, 0xe2, 0x10, 0x5e,
0x20, 0x4d, 0x48, 0x78,
- 0x00, 0xe2, 0xfc, 0x5d,
+ 0x00, 0xe2, 0x10, 0x5e,
0x30, 0x3f, 0xc0, 0x09,
0x30, 0xe0, 0x50, 0x60,
0x7f, 0x4a, 0x94, 0x08,
@@ -51,7 +51,7 @@
0x00, 0xe2, 0x76, 0x58,
0x00, 0xe2, 0x86, 0x58,
0x00, 0xe2, 0x06, 0x40,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
0x01, 0x52, 0x84, 0x78,
0x02, 0x58, 0x50, 0x31,
@@ -59,26 +59,26 @@
0xff, 0x97, 0x6f, 0x78,
0x50, 0x4b, 0x6a, 0x68,
0xbf, 0x3a, 0x74, 0x08,
- 0x14, 0xea, 0x64, 0x59,
+ 0x14, 0xea, 0x6e, 0x59,
0x14, 0xea, 0x04, 0x00,
0x08, 0x92, 0x25, 0x03,
0xff, 0x90, 0x5f, 0x68,
- 0x00, 0xe2, 0x76, 0x5b,
+ 0x00, 0xe2, 0x8a, 0x5b,
0x00, 0xe2, 0x5e, 0x40,
- 0x00, 0xea, 0x5e, 0x59,
+ 0x00, 0xea, 0x68, 0x59,
0x01, 0xea, 0x00, 0x30,
0x80, 0xf9, 0x7e, 0x68,
- 0x00, 0xe2, 0x5c, 0x59,
- 0x11, 0xea, 0x5e, 0x59,
+ 0x00, 0xe2, 0x66, 0x59,
+ 0x11, 0xea, 0x68, 0x59,
0x11, 0xea, 0x00, 0x00,
- 0x80, 0xf9, 0x5c, 0x79,
+ 0x80, 0xf9, 0x66, 0x79,
0xff, 0xea, 0xd4, 0x0d,
- 0x22, 0xea, 0x5e, 0x59,
+ 0x22, 0xea, 0x68, 0x59,
0x22, 0xea, 0x00, 0x00,
0x10, 0x16, 0x90, 0x78,
0x10, 0x16, 0x2c, 0x00,
0x01, 0x0b, 0xae, 0x32,
- 0x18, 0xad, 0x12, 0x79,
+ 0x18, 0xad, 0x1c, 0x79,
0x04, 0xad, 0xdc, 0x68,
0x80, 0xad, 0x84, 0x78,
0x10, 0xad, 0xaa, 0x78,
@@ -118,7 +118,6 @@
0x80, 0x18, 0x30, 0x04,
0x40, 0xad, 0x84, 0x78,
0xe7, 0xad, 0x5a, 0x09,
- 0x02, 0xa8, 0x40, 0x31,
0xff, 0xea, 0xc0, 0x09,
0x01, 0x54, 0xa9, 0x1a,
0x00, 0x55, 0xab, 0x22,
@@ -128,24 +127,30 @@
0xff, 0xea, 0x5a, 0x03,
0xff, 0xea, 0x5e, 0x03,
0x01, 0x10, 0xd4, 0x31,
- 0x10, 0x92, 0x07, 0x69,
+ 0x02, 0xa8, 0x40, 0x31,
+ 0x01, 0x92, 0xc1, 0x31,
0x3d, 0x93, 0xc5, 0x29,
0xfe, 0xe2, 0xc4, 0x09,
0x01, 0xea, 0xc6, 0x01,
0x02, 0xe2, 0xc8, 0x31,
0x02, 0xec, 0x50, 0x31,
0x02, 0xa0, 0xda, 0x31,
- 0xff, 0xa9, 0x06, 0x71,
+ 0xff, 0xa9, 0x10, 0x71,
+ 0x10, 0xe0, 0x0e, 0x79,
+ 0x10, 0x92, 0x0f, 0x79,
+ 0x01, 0x4d, 0x9b, 0x02,
+ 0x02, 0xa0, 0xc0, 0x32,
+ 0x01, 0x93, 0xc5, 0x36,
0x02, 0xa0, 0x58, 0x37,
- 0xff, 0x21, 0x0f, 0x71,
+ 0xff, 0x21, 0x19, 0x71,
0x02, 0x22, 0x51, 0x31,
0x02, 0xa0, 0x5c, 0x33,
0x02, 0xa0, 0x44, 0x36,
0x02, 0xa0, 0x40, 0x32,
0x02, 0xa0, 0x44, 0x36,
- 0x04, 0x4d, 0x17, 0x69,
- 0x40, 0x16, 0x48, 0x69,
- 0xff, 0x2d, 0x4d, 0x61,
+ 0x05, 0x4d, 0x21, 0x69,
+ 0x40, 0x16, 0x52, 0x69,
+ 0xff, 0x2d, 0x57, 0x61,
0xff, 0x29, 0x85, 0x70,
0x02, 0x28, 0x55, 0x32,
0x01, 0xea, 0x5a, 0x01,
@@ -159,22 +164,22 @@
0x01, 0x56, 0xad, 0x1a,
0xff, 0x54, 0xa9, 0x1a,
0xff, 0x55, 0xab, 0x22,
- 0xff, 0x8d, 0x41, 0x71,
- 0x80, 0xac, 0x40, 0x71,
- 0x20, 0x16, 0x40, 0x69,
+ 0xff, 0x8d, 0x4b, 0x71,
+ 0x80, 0xac, 0x4a, 0x71,
+ 0x20, 0x16, 0x4a, 0x69,
0x00, 0xac, 0xc4, 0x19,
- 0x07, 0xe2, 0x40, 0xf9,
+ 0x07, 0xe2, 0x4a, 0xf9,
0x02, 0x8c, 0x51, 0x31,
- 0x00, 0xe2, 0x24, 0x41,
+ 0x00, 0xe2, 0x2e, 0x41,
0x01, 0xac, 0x08, 0x31,
0x09, 0xea, 0x5a, 0x01,
0x02, 0x8c, 0x51, 0x32,
0xff, 0xea, 0x1a, 0x07,
0x04, 0x24, 0xf9, 0x30,
- 0x1d, 0xea, 0x52, 0x41,
+ 0x1d, 0xea, 0x5c, 0x41,
0x02, 0x2c, 0x51, 0x31,
0x04, 0xa8, 0xf9, 0x30,
- 0x19, 0xea, 0x52, 0x41,
+ 0x19, 0xea, 0x5c, 0x41,
0x06, 0xea, 0x08, 0x81,
0x01, 0xe2, 0x5a, 0x35,
0x02, 0xf2, 0xf0, 0x31,
@@ -190,27 +195,27 @@
0x02, 0x20, 0xb9, 0x30,
0x02, 0x20, 0x51, 0x31,
0x4c, 0x93, 0xd7, 0x28,
- 0x10, 0x92, 0x77, 0x79,
+ 0x10, 0x92, 0x81, 0x79,
0x01, 0x6b, 0xc0, 0x30,
0x02, 0x64, 0xc8, 0x00,
0x40, 0x3a, 0x74, 0x04,
0x00, 0xe2, 0x76, 0x58,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
0x30, 0x3f, 0xc0, 0x09,
- 0x30, 0xe0, 0x78, 0x61,
- 0x20, 0x3f, 0x8e, 0x69,
- 0x10, 0x3f, 0x78, 0x79,
+ 0x30, 0xe0, 0x82, 0x61,
+ 0x20, 0x3f, 0x98, 0x69,
+ 0x10, 0x3f, 0x82, 0x79,
0x02, 0xea, 0x7e, 0x00,
- 0x00, 0xea, 0x5e, 0x59,
+ 0x00, 0xea, 0x68, 0x59,
0x01, 0xea, 0x00, 0x30,
0x02, 0x4e, 0x51, 0x35,
0x01, 0xea, 0x7e, 0x00,
- 0x11, 0xea, 0x5e, 0x59,
+ 0x11, 0xea, 0x68, 0x59,
0x11, 0xea, 0x00, 0x00,
0x02, 0x4e, 0x51, 0x35,
0xc0, 0x4a, 0x94, 0x00,
- 0x04, 0x41, 0x9c, 0x79,
+ 0x04, 0x41, 0xa6, 0x79,
0x08, 0xea, 0x98, 0x00,
0x08, 0x57, 0xae, 0x00,
0x08, 0x3c, 0x78, 0x00,
@@ -218,12 +223,12 @@
0x0f, 0x67, 0xc0, 0x09,
0x00, 0x3a, 0x75, 0x02,
0x20, 0xea, 0x96, 0x00,
- 0x00, 0xe2, 0x14, 0x42,
+ 0x00, 0xe2, 0x28, 0x42,
0xc0, 0x4a, 0x94, 0x00,
- 0x40, 0x3a, 0xc8, 0x69,
+ 0x40, 0x3a, 0xd2, 0x69,
0x02, 0x55, 0x06, 0x68,
- 0x02, 0x56, 0xc8, 0x69,
- 0xff, 0x5b, 0xc8, 0x61,
+ 0x02, 0x56, 0xd2, 0x69,
+ 0xff, 0x5b, 0xd2, 0x61,
0x02, 0x20, 0x51, 0x31,
0x80, 0xea, 0xb2, 0x01,
0x44, 0xea, 0x00, 0x00,
@@ -231,40 +236,45 @@
0x33, 0xea, 0x00, 0x00,
0xff, 0xea, 0xb2, 0x09,
0xff, 0xe0, 0xc0, 0x19,
- 0xff, 0xe0, 0xca, 0x79,
+ 0xff, 0xe0, 0xd4, 0x79,
0x02, 0xac, 0x51, 0x31,
- 0x00, 0xe2, 0xc0, 0x41,
+ 0x00, 0xe2, 0xca, 0x41,
0x02, 0x5e, 0x50, 0x31,
0x02, 0xa8, 0xb8, 0x30,
0x02, 0x5c, 0x50, 0x31,
- 0xff, 0xad, 0xdb, 0x71,
+ 0xff, 0xad, 0xe5, 0x71,
0x02, 0xac, 0x41, 0x31,
0x02, 0x22, 0x51, 0x31,
0x02, 0xa0, 0x5c, 0x33,
0x02, 0xa0, 0x44, 0x32,
- 0x00, 0xe2, 0xe4, 0x41,
- 0x10, 0x92, 0xe5, 0x69,
+ 0x00, 0xe2, 0xf8, 0x41,
+ 0x01, 0x4d, 0xf1, 0x79,
+ 0x01, 0x62, 0xc1, 0x31,
+ 0x00, 0x93, 0xf1, 0x61,
+ 0xfe, 0x4d, 0x9b, 0x0a,
+ 0x02, 0x60, 0x41, 0x31,
+ 0x00, 0xe2, 0xdc, 0x41,
0x3d, 0x93, 0xc9, 0x29,
0x01, 0xe4, 0xc8, 0x01,
0x01, 0xea, 0xca, 0x01,
0xff, 0xea, 0xda, 0x01,
0x02, 0x20, 0x51, 0x31,
0x02, 0xae, 0x41, 0x32,
- 0xff, 0x21, 0xed, 0x61,
+ 0xff, 0x21, 0x01, 0x62,
0xff, 0xea, 0x46, 0x02,
0x02, 0x5c, 0x50, 0x31,
0x40, 0xea, 0x96, 0x00,
- 0x02, 0x56, 0x04, 0x6e,
- 0x01, 0x55, 0x04, 0x6e,
- 0x10, 0x92, 0xf9, 0x79,
- 0x10, 0x40, 0x02, 0x6a,
- 0x01, 0x56, 0x02, 0x7a,
+ 0x02, 0x56, 0x20, 0x6e,
+ 0x01, 0x55, 0x20, 0x6e,
+ 0x10, 0x92, 0x0d, 0x7a,
+ 0x10, 0x40, 0x16, 0x6a,
+ 0x01, 0x56, 0x16, 0x7a,
0xff, 0x97, 0x07, 0x78,
- 0x13, 0xea, 0x64, 0x59,
+ 0x13, 0xea, 0x6e, 0x59,
0x13, 0xea, 0x04, 0x00,
0x00, 0xe2, 0x06, 0x40,
0xbf, 0x3a, 0x74, 0x08,
- 0x04, 0x41, 0x08, 0x7a,
+ 0x04, 0x41, 0x1c, 0x7a,
0x08, 0xea, 0x98, 0x00,
0x08, 0x57, 0xae, 0x00,
0x01, 0x93, 0x75, 0x32,
@@ -272,108 +282,108 @@
0x40, 0xea, 0x72, 0x02,
0x08, 0x3c, 0x78, 0x00,
0x80, 0xea, 0x6e, 0x02,
- 0x00, 0xe2, 0xe2, 0x5b,
+ 0x00, 0xe2, 0xf6, 0x5b,
0x01, 0x3c, 0xc1, 0x31,
- 0x9f, 0xe0, 0x84, 0x7c,
- 0x80, 0xe0, 0x28, 0x72,
- 0xa0, 0xe0, 0x64, 0x72,
- 0xc0, 0xe0, 0x5a, 0x72,
- 0xe0, 0xe0, 0x94, 0x72,
- 0x01, 0xea, 0x64, 0x59,
+ 0x9f, 0xe0, 0x98, 0x7c,
+ 0x80, 0xe0, 0x3c, 0x72,
+ 0xa0, 0xe0, 0x78, 0x72,
+ 0xc0, 0xe0, 0x6e, 0x72,
+ 0xe0, 0xe0, 0xa8, 0x72,
+ 0x01, 0xea, 0x6e, 0x59,
0x01, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x14, 0x42,
- 0x80, 0x39, 0x2f, 0x7a,
- 0x03, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0x80, 0x39, 0x43, 0x7a,
+ 0x03, 0xea, 0x6e, 0x59,
0x03, 0xea, 0x04, 0x00,
- 0xee, 0x00, 0x36, 0x6a,
+ 0xee, 0x00, 0x4a, 0x6a,
0x05, 0xea, 0xb4, 0x00,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
0x02, 0xa8, 0x9c, 0x32,
- 0x00, 0xe2, 0x7e, 0x59,
+ 0x00, 0xe2, 0x88, 0x59,
0xef, 0x96, 0xd5, 0x19,
- 0x00, 0xe2, 0x46, 0x52,
+ 0x00, 0xe2, 0x5a, 0x52,
0x09, 0x80, 0xe1, 0x30,
0x02, 0xea, 0x36, 0x00,
0xa8, 0xea, 0x32, 0x00,
- 0x00, 0xe2, 0x4c, 0x42,
+ 0x00, 0xe2, 0x60, 0x42,
0x01, 0x96, 0xd1, 0x30,
0x10, 0x80, 0x89, 0x31,
0x20, 0xea, 0x32, 0x00,
0xbf, 0x39, 0x73, 0x0a,
- 0x10, 0x4c, 0x56, 0x6a,
- 0x20, 0x19, 0x4e, 0x6a,
- 0x20, 0x19, 0x52, 0x6a,
- 0x02, 0x4d, 0x14, 0x6a,
+ 0x10, 0x4c, 0x6a, 0x6a,
+ 0x20, 0x19, 0x62, 0x6a,
+ 0x20, 0x19, 0x66, 0x6a,
+ 0x02, 0x4d, 0x28, 0x6a,
0x40, 0x39, 0x73, 0x02,
- 0x00, 0xe2, 0x14, 0x42,
- 0x80, 0x39, 0xd5, 0x6a,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0x80, 0x39, 0xe9, 0x6a,
0x01, 0x44, 0x10, 0x33,
0x08, 0x92, 0x25, 0x03,
- 0x00, 0xe2, 0x14, 0x42,
+ 0x00, 0xe2, 0x28, 0x42,
0x10, 0xea, 0x80, 0x00,
0x01, 0x37, 0xc5, 0x31,
- 0x80, 0xe2, 0x80, 0x62,
- 0x10, 0x92, 0xa5, 0x6a,
+ 0x80, 0xe2, 0x94, 0x62,
+ 0x10, 0x92, 0xb9, 0x6a,
0xc0, 0x94, 0xc5, 0x01,
- 0x40, 0x92, 0x71, 0x6a,
+ 0x40, 0x92, 0x85, 0x6a,
0xbf, 0xe2, 0xc4, 0x09,
- 0x20, 0x92, 0x85, 0x7a,
+ 0x20, 0x92, 0x99, 0x7a,
0x01, 0xe2, 0x88, 0x30,
- 0x00, 0xe2, 0xe2, 0x5b,
- 0xa0, 0x3c, 0x8d, 0x62,
+ 0x00, 0xe2, 0xf6, 0x5b,
+ 0xa0, 0x3c, 0xa1, 0x62,
0x23, 0x92, 0x89, 0x08,
- 0x00, 0xe2, 0xe2, 0x5b,
- 0xa0, 0x3c, 0x8d, 0x62,
- 0x00, 0xa8, 0x84, 0x42,
- 0xff, 0xe2, 0x84, 0x62,
- 0x00, 0xe2, 0xa4, 0x42,
+ 0x00, 0xe2, 0xf6, 0x5b,
+ 0xa0, 0x3c, 0xa1, 0x62,
+ 0x00, 0xa8, 0x98, 0x42,
+ 0xff, 0xe2, 0x98, 0x62,
+ 0x00, 0xe2, 0xb8, 0x42,
0x40, 0xea, 0x98, 0x00,
0x01, 0xe2, 0x88, 0x30,
- 0x00, 0xe2, 0xe2, 0x5b,
- 0xa0, 0x3c, 0x63, 0x72,
+ 0x00, 0xe2, 0xf6, 0x5b,
+ 0xa0, 0x3c, 0x77, 0x72,
0x40, 0xea, 0x98, 0x00,
0x01, 0x37, 0x95, 0x32,
0x08, 0xea, 0x6e, 0x02,
- 0x00, 0xe2, 0x14, 0x42,
- 0xe0, 0xea, 0xfe, 0x5b,
- 0x80, 0xe0, 0xe0, 0x6a,
- 0x04, 0xe0, 0x92, 0x73,
- 0x02, 0xe0, 0xc4, 0x73,
- 0x00, 0xea, 0x3e, 0x73,
- 0x03, 0xe0, 0xd4, 0x73,
- 0x23, 0xe0, 0xb6, 0x72,
- 0x08, 0xe0, 0xdc, 0x72,
- 0x00, 0xe2, 0xe2, 0x5b,
- 0x07, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0xe0, 0xea, 0x12, 0x5c,
+ 0x80, 0xe0, 0xf4, 0x6a,
+ 0x04, 0xe0, 0xa6, 0x73,
+ 0x02, 0xe0, 0xd8, 0x73,
+ 0x00, 0xea, 0x52, 0x73,
+ 0x03, 0xe0, 0xe8, 0x73,
+ 0x23, 0xe0, 0xca, 0x72,
+ 0x08, 0xe0, 0xf0, 0x72,
+ 0x00, 0xe2, 0xf6, 0x5b,
+ 0x07, 0xea, 0x6e, 0x59,
0x07, 0xea, 0x04, 0x00,
- 0x08, 0x48, 0x15, 0x72,
- 0x04, 0x48, 0xb3, 0x62,
+ 0x08, 0x48, 0x29, 0x72,
+ 0x04, 0x48, 0xc7, 0x62,
0x01, 0x49, 0x89, 0x30,
- 0x00, 0xe2, 0xa4, 0x42,
+ 0x00, 0xe2, 0xb8, 0x42,
0x01, 0x44, 0xd4, 0x31,
- 0x00, 0xe2, 0xa4, 0x42,
+ 0x00, 0xe2, 0xb8, 0x42,
0x01, 0x00, 0x6c, 0x32,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
0x4c, 0x3a, 0xc1, 0x28,
0x01, 0x64, 0xc0, 0x31,
- 0x00, 0x36, 0x5f, 0x59,
+ 0x00, 0x36, 0x69, 0x59,
0x01, 0x36, 0x01, 0x30,
- 0x01, 0xe0, 0xda, 0x7a,
- 0xa0, 0xea, 0xf4, 0x5b,
- 0x01, 0xa0, 0xda, 0x62,
- 0x01, 0x84, 0xcf, 0x7a,
- 0x01, 0x95, 0xdd, 0x6a,
- 0x05, 0xea, 0x64, 0x59,
+ 0x01, 0xe0, 0xee, 0x7a,
+ 0xa0, 0xea, 0x08, 0x5c,
+ 0x01, 0xa0, 0xee, 0x62,
+ 0x01, 0x84, 0xe3, 0x7a,
+ 0x01, 0x95, 0xf1, 0x6a,
+ 0x05, 0xea, 0x6e, 0x59,
0x05, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0xdc, 0x42,
- 0x03, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0xf0, 0x42,
+ 0x03, 0xea, 0x6e, 0x59,
0x03, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0xdc, 0x42,
- 0x07, 0xea, 0x06, 0x5c,
+ 0x00, 0xe2, 0xf0, 0x42,
+ 0x07, 0xea, 0x1a, 0x5c,
0x01, 0x44, 0xd4, 0x31,
- 0x00, 0xe2, 0x14, 0x42,
+ 0x00, 0xe2, 0x28, 0x42,
0x3f, 0xe0, 0x76, 0x0a,
0xc0, 0x3a, 0xc1, 0x09,
0x00, 0x3b, 0x51, 0x01,
@@ -384,54 +394,54 @@
0x01, 0xea, 0xc6, 0x01,
0x02, 0xe2, 0xc8, 0x31,
0x02, 0xec, 0x40, 0x31,
- 0xff, 0xa1, 0xfc, 0x72,
+ 0xff, 0xa1, 0x10, 0x73,
0x02, 0xe8, 0xda, 0x31,
0x02, 0xa0, 0x50, 0x31,
- 0x00, 0xe2, 0x1e, 0x43,
+ 0x00, 0xe2, 0x32, 0x43,
0x80, 0x39, 0x73, 0x02,
0x01, 0x44, 0xd4, 0x31,
- 0x00, 0xe2, 0xe2, 0x5b,
+ 0x00, 0xe2, 0xf6, 0x5b,
0x01, 0x39, 0x73, 0x02,
- 0xe0, 0x3c, 0x39, 0x63,
+ 0xe0, 0x3c, 0x4d, 0x63,
0x02, 0x39, 0x73, 0x02,
- 0x20, 0x46, 0x32, 0x63,
+ 0x20, 0x46, 0x46, 0x63,
0xff, 0xea, 0x52, 0x09,
- 0xa8, 0xea, 0xf4, 0x5b,
- 0x04, 0x92, 0x19, 0x7b,
+ 0xa8, 0xea, 0x08, 0x5c,
+ 0x04, 0x92, 0x2d, 0x7b,
0x01, 0x3a, 0xc1, 0x31,
- 0x00, 0x93, 0x19, 0x63,
+ 0x00, 0x93, 0x2d, 0x63,
0x01, 0x3b, 0xc1, 0x31,
- 0x00, 0x94, 0x23, 0x73,
+ 0x00, 0x94, 0x37, 0x73,
0x01, 0xa9, 0x52, 0x11,
- 0xff, 0xa9, 0x0e, 0x6b,
- 0x00, 0xe2, 0x32, 0x43,
+ 0xff, 0xa9, 0x22, 0x6b,
+ 0x00, 0xe2, 0x46, 0x43,
0x10, 0x39, 0x73, 0x02,
- 0x04, 0x92, 0x33, 0x7b,
+ 0x04, 0x92, 0x47, 0x7b,
0xfb, 0x92, 0x25, 0x0b,
0xff, 0xea, 0x72, 0x0a,
- 0x01, 0xa4, 0x2d, 0x6b,
+ 0x01, 0xa4, 0x41, 0x6b,
0x02, 0xa8, 0x9c, 0x32,
- 0x00, 0xe2, 0x7e, 0x59,
- 0x10, 0x92, 0xdd, 0x7a,
- 0xff, 0xea, 0x06, 0x5c,
- 0x00, 0xe2, 0xdc, 0x42,
- 0x04, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0x88, 0x59,
+ 0x10, 0x92, 0xf1, 0x7a,
+ 0xff, 0xea, 0x1a, 0x5c,
+ 0x00, 0xe2, 0xf0, 0x42,
+ 0x04, 0xea, 0x6e, 0x59,
0x04, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0xdc, 0x42,
- 0x04, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0xf0, 0x42,
+ 0x04, 0xea, 0x6e, 0x59,
0x04, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x14, 0x42,
- 0x08, 0x92, 0xd5, 0x7a,
- 0xc0, 0x39, 0x49, 0x7b,
- 0x80, 0x39, 0xd5, 0x6a,
- 0xff, 0x88, 0x49, 0x6b,
- 0x40, 0x39, 0xd5, 0x6a,
- 0x10, 0x92, 0x4f, 0x7b,
- 0x0a, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0x08, 0x92, 0xe9, 0x7a,
+ 0xc0, 0x39, 0x5d, 0x7b,
+ 0x80, 0x39, 0xe9, 0x6a,
+ 0xff, 0x88, 0x5d, 0x6b,
+ 0x40, 0x39, 0xe9, 0x6a,
+ 0x10, 0x92, 0x63, 0x7b,
+ 0x0a, 0xea, 0x6e, 0x59,
0x0a, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x6e, 0x5b,
- 0x00, 0xe2, 0xae, 0x43,
- 0x50, 0x4b, 0x56, 0x6b,
+ 0x00, 0xe2, 0x82, 0x5b,
+ 0x00, 0xe2, 0xc2, 0x43,
+ 0x50, 0x4b, 0x6a, 0x6b,
0xbf, 0x3a, 0x74, 0x08,
0x01, 0xe0, 0xf4, 0x31,
0xff, 0xea, 0xc0, 0x09,
@@ -441,31 +451,31 @@
0x01, 0xfa, 0xc0, 0x35,
0x02, 0xa8, 0x90, 0x32,
0x02, 0xea, 0xb4, 0x00,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
0x02, 0x48, 0x51, 0x31,
0xff, 0x90, 0x85, 0x68,
- 0xff, 0x88, 0x7b, 0x6b,
- 0x01, 0xa4, 0x77, 0x6b,
- 0x02, 0xa4, 0x7f, 0x6b,
- 0x01, 0x84, 0x7f, 0x7b,
+ 0xff, 0x88, 0x8f, 0x6b,
+ 0x01, 0xa4, 0x8b, 0x6b,
+ 0x02, 0xa4, 0x93, 0x6b,
+ 0x01, 0x84, 0x93, 0x7b,
0x02, 0x28, 0x19, 0x33,
0x02, 0xa8, 0x50, 0x36,
- 0xff, 0x88, 0x7f, 0x73,
- 0x00, 0xe2, 0x52, 0x5b,
+ 0xff, 0x88, 0x93, 0x73,
+ 0x00, 0xe2, 0x66, 0x5b,
0x02, 0xa8, 0x20, 0x33,
0x04, 0xa4, 0x49, 0x03,
0xff, 0xea, 0x1a, 0x03,
- 0xff, 0x2d, 0x8b, 0x63,
+ 0xff, 0x2d, 0x9f, 0x63,
0x02, 0xa8, 0x58, 0x32,
0x02, 0xa8, 0x5c, 0x36,
0x02, 0xa8, 0x40, 0x31,
0x02, 0x2e, 0x51, 0x31,
0x02, 0xa0, 0x18, 0x33,
0x02, 0xa0, 0x5c, 0x36,
- 0xc0, 0x39, 0xd5, 0x6a,
+ 0xc0, 0x39, 0xe9, 0x6a,
0x04, 0x92, 0x25, 0x03,
- 0x20, 0x92, 0xaf, 0x6b,
+ 0x20, 0x92, 0xc3, 0x6b,
0x02, 0xa8, 0x40, 0x31,
0xc0, 0x3a, 0xc1, 0x09,
0x00, 0x3b, 0x51, 0x01,
@@ -480,60 +490,60 @@
0xf7, 0x57, 0xae, 0x08,
0x08, 0xea, 0x98, 0x00,
0x01, 0x44, 0xd4, 0x31,
- 0xee, 0x00, 0xb8, 0x6b,
+ 0xee, 0x00, 0xcc, 0x6b,
0x02, 0xea, 0xb4, 0x00,
0xc0, 0xea, 0x72, 0x02,
- 0x09, 0x4c, 0xba, 0x7b,
+ 0x09, 0x4c, 0xce, 0x7b,
0x01, 0xea, 0x78, 0x02,
0x08, 0x4c, 0x06, 0x68,
- 0x0b, 0xea, 0x64, 0x59,
+ 0x0b, 0xea, 0x6e, 0x59,
0x0b, 0xea, 0x04, 0x00,
0x01, 0x44, 0xd4, 0x31,
- 0x20, 0x39, 0x15, 0x7a,
- 0x00, 0xe2, 0xcc, 0x5b,
- 0x00, 0xe2, 0x14, 0x42,
- 0x01, 0x84, 0xd1, 0x7b,
+ 0x20, 0x39, 0x29, 0x7a,
+ 0x00, 0xe2, 0xe0, 0x5b,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0x01, 0x84, 0xe5, 0x7b,
0x01, 0xa4, 0x49, 0x07,
0x08, 0x60, 0x30, 0x33,
0x08, 0x80, 0x41, 0x37,
0xdf, 0x39, 0x73, 0x0a,
- 0xee, 0x00, 0xde, 0x6b,
+ 0xee, 0x00, 0xf2, 0x6b,
0x05, 0xea, 0xb4, 0x00,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
- 0x00, 0xe2, 0x7e, 0x59,
- 0x00, 0xe2, 0xdc, 0x42,
- 0xff, 0x42, 0xee, 0x6b,
- 0x01, 0x41, 0xe2, 0x6b,
- 0x02, 0x41, 0xe2, 0x7b,
- 0xff, 0x42, 0xee, 0x6b,
- 0x01, 0x41, 0xe2, 0x6b,
- 0x02, 0x41, 0xe2, 0x7b,
- 0xff, 0x42, 0xee, 0x7b,
- 0x04, 0x4c, 0xe2, 0x6b,
+ 0x00, 0xe2, 0x88, 0x59,
+ 0x00, 0xe2, 0xf0, 0x42,
+ 0xff, 0x42, 0x02, 0x6c,
+ 0x01, 0x41, 0xf6, 0x6b,
+ 0x02, 0x41, 0xf6, 0x7b,
+ 0xff, 0x42, 0x02, 0x6c,
+ 0x01, 0x41, 0xf6, 0x6b,
+ 0x02, 0x41, 0xf6, 0x7b,
+ 0xff, 0x42, 0x02, 0x7c,
+ 0x04, 0x4c, 0xf6, 0x6b,
0xe0, 0x41, 0x78, 0x0e,
0x01, 0x44, 0xd4, 0x31,
- 0xff, 0x42, 0xf6, 0x7b,
- 0x04, 0x4c, 0xf6, 0x6b,
+ 0xff, 0x42, 0x0a, 0x7c,
+ 0x04, 0x4c, 0x0a, 0x6c,
0xe0, 0x41, 0x78, 0x0a,
- 0xe0, 0x3c, 0x15, 0x62,
+ 0xe0, 0x3c, 0x29, 0x62,
0xff, 0xea, 0xca, 0x09,
0x01, 0xe2, 0xc8, 0x31,
0x01, 0x46, 0xda, 0x35,
0x01, 0x44, 0xd4, 0x35,
0x10, 0xea, 0x80, 0x00,
0x01, 0xe2, 0x6e, 0x36,
- 0x04, 0xa6, 0x0e, 0x7c,
+ 0x04, 0xa6, 0x22, 0x7c,
0xff, 0xea, 0x5a, 0x09,
0xff, 0xea, 0x4c, 0x0d,
- 0x01, 0xa6, 0x3a, 0x6c,
+ 0x01, 0xa6, 0x4e, 0x6c,
0x10, 0xad, 0x84, 0x78,
- 0x80, 0xad, 0x32, 0x6c,
+ 0x80, 0xad, 0x46, 0x6c,
0x08, 0xad, 0x84, 0x68,
- 0x20, 0x19, 0x26, 0x7c,
+ 0x20, 0x19, 0x3a, 0x7c,
0x80, 0xea, 0xb2, 0x01,
0x11, 0x00, 0x00, 0x10,
- 0x02, 0xa6, 0x22, 0x7c,
+ 0x02, 0xa6, 0x36, 0x7c,
0xff, 0xea, 0xb2, 0x0d,
0x11, 0x00, 0x00, 0x10,
0xff, 0xea, 0xb2, 0x09,
@@ -561,7 +571,7 @@
0x00, 0x86, 0x0d, 0x23,
0x00, 0x87, 0x0f, 0x23,
0x01, 0x84, 0xc5, 0x31,
- 0x80, 0x83, 0x5d, 0x7c,
+ 0x80, 0x83, 0x71, 0x7c,
0x02, 0xe2, 0xc4, 0x01,
0xff, 0xea, 0x4c, 0x09,
0x01, 0xe2, 0x36, 0x30,
@@ -572,75 +582,75 @@
0xfe, 0xa6, 0x4c, 0x0d,
0x0b, 0x98, 0xe1, 0x30,
0xfd, 0xa4, 0x49, 0x09,
- 0x80, 0xa3, 0x71, 0x7c,
+ 0x80, 0xa3, 0x85, 0x7c,
0x02, 0xa4, 0x48, 0x01,
0x01, 0xa4, 0x36, 0x30,
0xa8, 0xea, 0x32, 0x00,
0xfd, 0xa4, 0x49, 0x0b,
0x05, 0xa3, 0x07, 0x33,
- 0x80, 0x83, 0x7d, 0x6c,
+ 0x80, 0x83, 0x91, 0x6c,
0x02, 0xea, 0x4c, 0x05,
0xff, 0xea, 0x4c, 0x0d,
- 0x00, 0xe2, 0x56, 0x59,
- 0x02, 0xa6, 0x10, 0x6c,
+ 0x00, 0xe2, 0x60, 0x59,
+ 0x02, 0xa6, 0x24, 0x6c,
0x80, 0xf9, 0xf2, 0x05,
- 0xc0, 0x39, 0x8b, 0x7c,
- 0x03, 0xea, 0x64, 0x59,
+ 0xc0, 0x39, 0x9f, 0x7c,
+ 0x03, 0xea, 0x6e, 0x59,
0x03, 0xea, 0x04, 0x00,
- 0x20, 0x39, 0xaf, 0x7c,
- 0x01, 0x84, 0x95, 0x6c,
- 0x06, 0xea, 0x64, 0x59,
+ 0x20, 0x39, 0xc3, 0x7c,
+ 0x01, 0x84, 0xa9, 0x6c,
+ 0x06, 0xea, 0x6e, 0x59,
0x06, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0xb2, 0x44,
+ 0x00, 0xe2, 0xc6, 0x44,
0x01, 0x00, 0x6c, 0x32,
- 0xee, 0x00, 0x9e, 0x6c,
+ 0xee, 0x00, 0xb2, 0x6c,
0x05, 0xea, 0xb4, 0x00,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
0x80, 0x3d, 0x7a, 0x00,
- 0xfc, 0x42, 0xa0, 0x7c,
+ 0xfc, 0x42, 0xb4, 0x7c,
0x7f, 0x3d, 0x7a, 0x08,
- 0x00, 0x36, 0x5f, 0x59,
+ 0x00, 0x36, 0x69, 0x59,
0x01, 0x36, 0x01, 0x30,
- 0x09, 0xea, 0x64, 0x59,
+ 0x09, 0xea, 0x6e, 0x59,
0x09, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x14, 0x42,
- 0x01, 0xa4, 0x95, 0x6c,
- 0x00, 0xe2, 0x68, 0x5c,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0x01, 0xa4, 0xa9, 0x6c,
+ 0x00, 0xe2, 0x7c, 0x5c,
0x20, 0x39, 0x73, 0x02,
0x01, 0x00, 0x6c, 0x32,
- 0x02, 0xa6, 0xba, 0x7c,
- 0x00, 0xe2, 0x7e, 0x5c,
+ 0x02, 0xa6, 0xce, 0x7c,
+ 0x00, 0xe2, 0x92, 0x5c,
0x00, 0xe2, 0x76, 0x58,
0x00, 0xe2, 0x86, 0x58,
0x00, 0xe2, 0x5a, 0x58,
- 0x00, 0x36, 0x5f, 0x59,
+ 0x00, 0x36, 0x69, 0x59,
0x01, 0x36, 0x01, 0x30,
- 0x20, 0x19, 0xba, 0x6c,
- 0x00, 0xe2, 0xea, 0x5c,
- 0x04, 0x19, 0xd4, 0x6c,
+ 0x20, 0x19, 0xce, 0x6c,
+ 0x00, 0xe2, 0xfe, 0x5c,
+ 0x04, 0x19, 0xe8, 0x6c,
0x02, 0x19, 0x32, 0x00,
- 0x01, 0x84, 0xd5, 0x7c,
- 0x01, 0x1b, 0xce, 0x7c,
- 0x01, 0x1a, 0xd4, 0x6c,
- 0x00, 0xe2, 0x84, 0x44,
- 0x80, 0x4b, 0xda, 0x6c,
- 0x01, 0x4c, 0xd6, 0x7c,
- 0x03, 0x42, 0x84, 0x6c,
- 0x00, 0xe2, 0x0a, 0x5c,
+ 0x01, 0x84, 0xe9, 0x7c,
+ 0x01, 0x1b, 0xe2, 0x7c,
+ 0x01, 0x1a, 0xe8, 0x6c,
+ 0x00, 0xe2, 0x98, 0x44,
+ 0x80, 0x4b, 0xee, 0x6c,
+ 0x01, 0x4c, 0xea, 0x7c,
+ 0x03, 0x42, 0x98, 0x6c,
+ 0x00, 0xe2, 0x1e, 0x5c,
0x80, 0xf9, 0xf2, 0x01,
- 0x04, 0x39, 0x15, 0x7a,
- 0x00, 0xe2, 0x14, 0x42,
- 0x08, 0x5d, 0xf2, 0x6c,
+ 0x04, 0x39, 0x29, 0x7a,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0x08, 0x5d, 0x06, 0x6d,
0x00, 0xe2, 0x76, 0x58,
- 0x00, 0x36, 0x5f, 0x59,
+ 0x00, 0x36, 0x69, 0x59,
0x01, 0x36, 0x01, 0x30,
- 0x02, 0x1b, 0xe2, 0x7c,
- 0x08, 0x5d, 0xf0, 0x7c,
+ 0x02, 0x1b, 0xf6, 0x7c,
+ 0x08, 0x5d, 0x04, 0x7d,
0x03, 0x68, 0x00, 0x37,
0x01, 0x84, 0x09, 0x07,
- 0x80, 0x1b, 0xfc, 0x7c,
- 0x80, 0x84, 0xfd, 0x6c,
+ 0x80, 0x1b, 0x10, 0x7d,
+ 0x80, 0x84, 0x11, 0x6d,
0xff, 0x85, 0x0b, 0x1b,
0xff, 0x86, 0x0d, 0x23,
0xff, 0x87, 0x0f, 0x23,
@@ -652,161 +662,164 @@
0xf9, 0xd9, 0xb2, 0x0d,
0x01, 0xd9, 0xb2, 0x05,
0x01, 0x52, 0x48, 0x31,
- 0x20, 0xa4, 0x26, 0x7d,
- 0x20, 0x5b, 0x26, 0x7d,
- 0x80, 0xf9, 0x34, 0x7d,
+ 0x20, 0xa4, 0x3a, 0x7d,
+ 0x20, 0x5b, 0x3a, 0x7d,
+ 0x80, 0xf9, 0x48, 0x7d,
0x02, 0xea, 0xb4, 0x00,
0x11, 0x00, 0x00, 0x10,
- 0x04, 0x19, 0x40, 0x7d,
+ 0x04, 0x19, 0x54, 0x7d,
0xdf, 0x19, 0x32, 0x08,
- 0x60, 0x5b, 0x40, 0x6d,
- 0x01, 0x4c, 0x1a, 0x7d,
+ 0x60, 0x5b, 0x54, 0x6d,
+ 0x01, 0x4c, 0x2e, 0x7d,
0x20, 0x19, 0x32, 0x00,
0x01, 0xd9, 0xb2, 0x05,
0x02, 0xea, 0xb4, 0x00,
0x01, 0xd9, 0xb2, 0x05,
- 0x10, 0x5b, 0x38, 0x6d,
- 0x08, 0x5b, 0x42, 0x6d,
- 0x20, 0x5b, 0x32, 0x6d,
- 0x02, 0x5b, 0x62, 0x6d,
- 0x0e, 0xea, 0x64, 0x59,
+ 0x10, 0x5b, 0x4c, 0x6d,
+ 0x08, 0x5b, 0x56, 0x6d,
+ 0x20, 0x5b, 0x46, 0x6d,
+ 0x02, 0x5b, 0x76, 0x6d,
+ 0x0e, 0xea, 0x6e, 0x59,
0x0e, 0xea, 0x04, 0x00,
- 0x80, 0xf9, 0x22, 0x6d,
+ 0x80, 0xf9, 0x36, 0x6d,
0xdf, 0x5c, 0xb8, 0x08,
0x01, 0xd9, 0xb2, 0x05,
- 0x01, 0xa4, 0x1d, 0x6e,
- 0x00, 0xe2, 0x68, 0x5c,
- 0x00, 0xe2, 0x6c, 0x5d,
+ 0x01, 0xa4, 0x37, 0x6e,
+ 0x00, 0xe2, 0x7c, 0x5c,
+ 0x00, 0xe2, 0x80, 0x5d,
0x01, 0x90, 0x21, 0x1b,
0x01, 0xd9, 0xb2, 0x05,
- 0x00, 0xe2, 0x52, 0x5b,
+ 0x00, 0xe2, 0x66, 0x5b,
0xf3, 0x96, 0xd5, 0x19,
- 0x00, 0xe2, 0x50, 0x55,
- 0x80, 0x96, 0x51, 0x6d,
- 0x0f, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0x64, 0x55,
+ 0x80, 0x96, 0x65, 0x6d,
+ 0x0f, 0xea, 0x6e, 0x59,
0x0f, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x58, 0x45,
+ 0x00, 0xe2, 0x6c, 0x45,
0x04, 0x8c, 0xe1, 0x30,
0x01, 0xea, 0xf2, 0x00,
0x02, 0xea, 0x36, 0x00,
0xa8, 0xea, 0x32, 0x00,
- 0xff, 0x97, 0x5f, 0x7d,
- 0x14, 0xea, 0x64, 0x59,
+ 0xff, 0x97, 0x73, 0x7d,
+ 0x14, 0xea, 0x6e, 0x59,
0x14, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0xce, 0x5d,
+ 0x00, 0xe2, 0xe2, 0x5d,
0x01, 0xd9, 0xb2, 0x05,
0x09, 0x80, 0xe1, 0x30,
0x02, 0xea, 0x36, 0x00,
0xa8, 0xea, 0x32, 0x00,
- 0x00, 0xe2, 0xc6, 0x5d,
+ 0x00, 0xe2, 0xda, 0x5d,
0x01, 0xd9, 0xb2, 0x05,
- 0x02, 0xa6, 0x7c, 0x7d,
- 0x00, 0xe2, 0x56, 0x59,
- 0x20, 0x5b, 0x8a, 0x6d,
- 0xfc, 0x42, 0x76, 0x7d,
- 0x10, 0x40, 0x78, 0x6d,
- 0x20, 0x4d, 0x7a, 0x7d,
- 0x08, 0x5d, 0x8a, 0x6d,
- 0x02, 0xa6, 0x10, 0x6c,
- 0x00, 0xe2, 0x56, 0x59,
- 0x20, 0x5b, 0x8a, 0x6d,
- 0x01, 0x1b, 0xaa, 0x6d,
- 0xfc, 0x42, 0x86, 0x7d,
- 0x10, 0x40, 0x88, 0x6d,
+ 0x02, 0xa6, 0x90, 0x7d,
+ 0x00, 0xe2, 0x60, 0x59,
+ 0x20, 0x5b, 0x9e, 0x6d,
+ 0xfc, 0x42, 0x8a, 0x7d,
+ 0x10, 0x40, 0x8c, 0x6d,
+ 0x20, 0x4d, 0x8e, 0x7d,
+ 0x08, 0x5d, 0x9e, 0x6d,
+ 0x02, 0xa6, 0x24, 0x6c,
+ 0x00, 0xe2, 0x60, 0x59,
+ 0x20, 0x5b, 0x9e, 0x6d,
+ 0x01, 0x1b, 0xbe, 0x6d,
+ 0xfc, 0x42, 0x9a, 0x7d,
+ 0x10, 0x40, 0x9c, 0x6d,
0x20, 0x4d, 0x84, 0x78,
0x08, 0x5d, 0x84, 0x78,
0x02, 0x19, 0x32, 0x00,
0x01, 0x5b, 0x40, 0x31,
- 0x00, 0xe2, 0xea, 0x5c,
- 0x00, 0xe2, 0xcc, 0x5b,
+ 0x00, 0xe2, 0xfe, 0x5c,
+ 0x00, 0xe2, 0xe0, 0x5b,
0x20, 0xea, 0xb6, 0x00,
- 0x00, 0xe2, 0x0a, 0x5c,
+ 0x00, 0xe2, 0x1e, 0x5c,
0x20, 0x5c, 0xb8, 0x00,
- 0x04, 0x19, 0xa0, 0x6d,
- 0x01, 0x1a, 0xa0, 0x6d,
- 0x00, 0xe2, 0x56, 0x59,
+ 0x04, 0x19, 0xb4, 0x6d,
+ 0x01, 0x1a, 0xb4, 0x6d,
+ 0x00, 0xe2, 0x60, 0x59,
0x01, 0x1a, 0x84, 0x78,
0x80, 0xf9, 0xf2, 0x01,
- 0x20, 0xa0, 0x04, 0x7e,
+ 0x20, 0xa0, 0x18, 0x7e,
0xff, 0x90, 0x21, 0x1b,
- 0x08, 0x92, 0x63, 0x6b,
+ 0x08, 0x92, 0x77, 0x6b,
0x02, 0xea, 0xb4, 0x04,
0x01, 0xa4, 0x49, 0x03,
- 0x40, 0x5b, 0xba, 0x6d,
- 0x00, 0xe2, 0x56, 0x59,
- 0x40, 0x5b, 0xba, 0x6d,
- 0x04, 0x5d, 0x1e, 0x7e,
- 0x01, 0x1a, 0x1e, 0x7e,
+ 0x40, 0x5b, 0xce, 0x6d,
+ 0x00, 0xe2, 0x60, 0x59,
+ 0x40, 0x5b, 0xce, 0x6d,
+ 0x04, 0x5d, 0x38, 0x7e,
+ 0x01, 0x1a, 0x38, 0x7e,
0x20, 0x4d, 0x84, 0x78,
- 0x40, 0x5b, 0x04, 0x7e,
- 0x04, 0x5d, 0x1e, 0x7e,
- 0x01, 0x1a, 0x1e, 0x7e,
+ 0x40, 0x5b, 0x18, 0x7e,
+ 0x04, 0x5d, 0x38, 0x7e,
+ 0x01, 0x1a, 0x38, 0x7e,
0x80, 0xf9, 0xf2, 0x01,
0xff, 0x90, 0x21, 0x1b,
- 0x08, 0x92, 0x63, 0x6b,
+ 0x08, 0x92, 0x77, 0x6b,
0x02, 0xea, 0xb4, 0x04,
- 0x00, 0xe2, 0x56, 0x59,
+ 0x00, 0xe2, 0x60, 0x59,
0x01, 0x1b, 0x84, 0x78,
0x80, 0xf9, 0xf2, 0x01,
0x02, 0xea, 0xb4, 0x04,
- 0x00, 0xe2, 0x56, 0x59,
- 0x01, 0x1b, 0xe2, 0x6d,
- 0x40, 0x5b, 0xf0, 0x7d,
- 0x01, 0x1b, 0xe2, 0x6d,
+ 0x00, 0xe2, 0x60, 0x59,
+ 0x01, 0x1b, 0xf6, 0x6d,
+ 0x40, 0x5b, 0x04, 0x7e,
+ 0x01, 0x1b, 0xf6, 0x6d,
0x02, 0x19, 0x32, 0x00,
0x01, 0x1a, 0x84, 0x78,
0x80, 0xf9, 0xf2, 0x01,
0xff, 0xea, 0x10, 0x03,
0x08, 0x92, 0x25, 0x03,
- 0x00, 0xe2, 0x62, 0x43,
- 0x01, 0x1a, 0xec, 0x7d,
- 0x40, 0x5b, 0xe8, 0x7d,
- 0x01, 0x1a, 0xd6, 0x6d,
+ 0x00, 0xe2, 0x76, 0x43,
+ 0x01, 0x1a, 0x00, 0x7e,
+ 0x40, 0x5b, 0xfc, 0x7d,
+ 0x01, 0x1a, 0xea, 0x6d,
0xfc, 0x42, 0x84, 0x78,
- 0x01, 0x1a, 0xf0, 0x6d,
- 0x10, 0xea, 0x64, 0x59,
+ 0x01, 0x1a, 0x04, 0x6e,
+ 0x10, 0xea, 0x6e, 0x59,
0x10, 0xea, 0x04, 0x00,
0xfc, 0x42, 0x84, 0x78,
- 0x10, 0x40, 0xf6, 0x6d,
+ 0x10, 0x40, 0x0a, 0x6e,
0x20, 0x4d, 0x84, 0x78,
- 0x40, 0x5b, 0xd6, 0x6d,
+ 0x40, 0x5b, 0xea, 0x6d,
0x01, 0x1a, 0x84, 0x78,
0x01, 0x90, 0x21, 0x1b,
0x30, 0x3f, 0xc0, 0x09,
0x30, 0xe0, 0x84, 0x60,
0x40, 0x4b, 0x84, 0x68,
0xff, 0xea, 0x52, 0x01,
- 0xee, 0x00, 0x0c, 0x6e,
+ 0xee, 0x00, 0x20, 0x6e,
0x80, 0xf9, 0xf2, 0x01,
0xff, 0x90, 0x21, 0x1b,
0x02, 0xea, 0xb4, 0x00,
0x20, 0xea, 0x9a, 0x00,
- 0xf3, 0x42, 0x16, 0x6e,
- 0x12, 0xea, 0x64, 0x59,
+ 0x04, 0x41, 0x26, 0x7e,
+ 0x08, 0xea, 0x98, 0x00,
+ 0x08, 0x57, 0xae, 0x00,
+ 0xf3, 0x42, 0x30, 0x6e,
+ 0x12, 0xea, 0x6e, 0x59,
0x12, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x14, 0x42,
- 0x0d, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0x0d, 0xea, 0x6e, 0x59,
0x0d, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x14, 0x42,
+ 0x00, 0xe2, 0x28, 0x42,
0x01, 0x90, 0x21, 0x1b,
- 0x11, 0xea, 0x64, 0x59,
+ 0x11, 0xea, 0x6e, 0x59,
0x11, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x52, 0x5b,
+ 0x00, 0xe2, 0x66, 0x5b,
0x08, 0x5a, 0xb4, 0x00,
- 0x00, 0xe2, 0x44, 0x5e,
+ 0x00, 0xe2, 0x5e, 0x5e,
0xa8, 0xea, 0x32, 0x00,
- 0x00, 0xe2, 0x56, 0x59,
- 0x80, 0x1a, 0x32, 0x7e,
- 0x00, 0xe2, 0x44, 0x5e,
+ 0x00, 0xe2, 0x60, 0x59,
+ 0x80, 0x1a, 0x4c, 0x7e,
+ 0x00, 0xe2, 0x5e, 0x5e,
0x80, 0x19, 0x32, 0x00,
- 0x40, 0x5b, 0x38, 0x6e,
- 0x08, 0x5a, 0x38, 0x7e,
+ 0x40, 0x5b, 0x52, 0x6e,
+ 0x08, 0x5a, 0x52, 0x7e,
0x20, 0x4d, 0x84, 0x78,
0x02, 0x84, 0x09, 0x03,
- 0x40, 0x5b, 0x04, 0x7e,
+ 0x40, 0x5b, 0x18, 0x7e,
0xff, 0x90, 0x21, 0x1b,
0x80, 0xf9, 0xf2, 0x01,
- 0x08, 0x92, 0x63, 0x6b,
+ 0x08, 0x92, 0x77, 0x6b,
0x02, 0xea, 0xb4, 0x04,
0x01, 0x40, 0xe1, 0x30,
0x05, 0x41, 0xe3, 0x98,
@@ -1039,138 +1052,138 @@
{ ahd_patch0_func, 64, 1, 1 },
{ ahd_patch2_func, 67, 1, 2 },
{ ahd_patch0_func, 68, 1, 1 },
- { ahd_patch4_func, 116, 1, 1 },
- { ahd_patch2_func, 175, 3, 1 },
- { ahd_patch1_func, 178, 2, 1 },
- { ahd_patch5_func, 180, 1, 1 },
- { ahd_patch2_func, 189, 1, 2 },
- { ahd_patch0_func, 190, 1, 1 },
- { ahd_patch6_func, 191, 2, 2 },
- { ahd_patch0_func, 193, 6, 3 },
- { ahd_patch2_func, 196, 1, 2 },
- { ahd_patch0_func, 197, 1, 1 },
- { ahd_patch2_func, 200, 1, 2 },
- { ahd_patch0_func, 201, 1, 1 },
- { ahd_patch3_func, 203, 1, 1 },
- { ahd_patch7_func, 204, 3, 1 },
- { ahd_patch3_func, 213, 1, 1 },
- { ahd_patch5_func, 214, 16, 2 },
- { ahd_patch0_func, 230, 1, 1 },
- { ahd_patch8_func, 250, 2, 1 },
- { ahd_patch1_func, 254, 1, 2 },
- { ahd_patch0_func, 255, 1, 1 },
- { ahd_patch7_func, 258, 3, 1 },
- { ahd_patch1_func, 273, 1, 2 },
- { ahd_patch0_func, 274, 1, 1 },
- { ahd_patch1_func, 277, 1, 2 },
- { ahd_patch0_func, 278, 1, 1 },
- { ahd_patch2_func, 281, 1, 2 },
- { ahd_patch0_func, 282, 1, 1 },
- { ahd_patch9_func, 295, 2, 2 },
- { ahd_patch0_func, 297, 1, 1 },
- { ahd_patch1_func, 339, 1, 2 },
- { ahd_patch0_func, 340, 1, 1 },
- { ahd_patch2_func, 348, 1, 2 },
- { ahd_patch0_func, 349, 1, 1 },
- { ahd_patch2_func, 352, 1, 2 },
- { ahd_patch0_func, 353, 1, 1 },
- { ahd_patch1_func, 359, 1, 2 },
- { ahd_patch0_func, 360, 1, 1 },
- { ahd_patch1_func, 362, 1, 2 },
+ { ahd_patch4_func, 115, 1, 1 },
+ { ahd_patch2_func, 180, 3, 1 },
+ { ahd_patch1_func, 183, 2, 1 },
+ { ahd_patch5_func, 185, 1, 1 },
+ { ahd_patch2_func, 194, 1, 2 },
+ { ahd_patch0_func, 195, 1, 1 },
+ { ahd_patch6_func, 196, 2, 2 },
+ { ahd_patch0_func, 198, 6, 3 },
+ { ahd_patch2_func, 201, 1, 2 },
+ { ahd_patch0_func, 202, 1, 1 },
+ { ahd_patch2_func, 205, 1, 2 },
+ { ahd_patch0_func, 206, 1, 1 },
+ { ahd_patch3_func, 208, 1, 1 },
+ { ahd_patch7_func, 209, 3, 1 },
+ { ahd_patch3_func, 218, 1, 1 },
+ { ahd_patch5_func, 219, 16, 2 },
+ { ahd_patch0_func, 235, 1, 1 },
+ { ahd_patch8_func, 260, 2, 1 },
+ { ahd_patch1_func, 264, 1, 2 },
+ { ahd_patch0_func, 265, 1, 1 },
+ { ahd_patch7_func, 268, 3, 1 },
+ { ahd_patch1_func, 283, 1, 2 },
+ { ahd_patch0_func, 284, 1, 1 },
+ { ahd_patch1_func, 287, 1, 2 },
+ { ahd_patch0_func, 288, 1, 1 },
+ { ahd_patch2_func, 291, 1, 2 },
+ { ahd_patch0_func, 292, 1, 1 },
+ { ahd_patch9_func, 305, 2, 2 },
+ { ahd_patch0_func, 307, 1, 1 },
+ { ahd_patch1_func, 349, 1, 2 },
+ { ahd_patch0_func, 350, 1, 1 },
+ { ahd_patch2_func, 358, 1, 2 },
+ { ahd_patch0_func, 359, 1, 1 },
+ { ahd_patch2_func, 362, 1, 2 },
{ ahd_patch0_func, 363, 1, 1 },
- { ahd_patch10_func, 382, 1, 1 },
- { ahd_patch10_func, 385, 1, 1 },
- { ahd_patch10_func, 387, 1, 1 },
- { ahd_patch10_func, 399, 1, 1 },
- { ahd_patch1_func, 409, 1, 2 },
- { ahd_patch0_func, 410, 1, 1 },
- { ahd_patch1_func, 412, 1, 2 },
- { ahd_patch0_func, 413, 1, 1 },
- { ahd_patch1_func, 421, 1, 2 },
- { ahd_patch0_func, 422, 1, 1 },
- { ahd_patch2_func, 435, 1, 2 },
- { ahd_patch0_func, 436, 1, 1 },
- { ahd_patch11_func, 472, 1, 1 },
- { ahd_patch1_func, 480, 1, 2 },
- { ahd_patch0_func, 481, 1, 1 },
- { ahd_patch2_func, 493, 1, 2 },
- { ahd_patch0_func, 494, 1, 1 },
- { ahd_patch12_func, 497, 6, 2 },
- { ahd_patch0_func, 503, 1, 1 },
- { ahd_patch13_func, 524, 7, 1 },
- { ahd_patch14_func, 533, 1, 1 },
- { ahd_patch15_func, 542, 1, 1 },
- { ahd_patch16_func, 543, 1, 2 },
- { ahd_patch0_func, 544, 1, 1 },
- { ahd_patch17_func, 547, 1, 1 },
- { ahd_patch16_func, 548, 1, 1 },
- { ahd_patch18_func, 559, 1, 2 },
- { ahd_patch0_func, 560, 1, 1 },
- { ahd_patch1_func, 579, 1, 2 },
- { ahd_patch0_func, 580, 1, 1 },
- { ahd_patch1_func, 583, 1, 2 },
- { ahd_patch0_func, 584, 1, 1 },
- { ahd_patch2_func, 589, 1, 2 },
+ { ahd_patch1_func, 369, 1, 2 },
+ { ahd_patch0_func, 370, 1, 1 },
+ { ahd_patch1_func, 372, 1, 2 },
+ { ahd_patch0_func, 373, 1, 1 },
+ { ahd_patch10_func, 392, 1, 1 },
+ { ahd_patch10_func, 395, 1, 1 },
+ { ahd_patch10_func, 397, 1, 1 },
+ { ahd_patch10_func, 409, 1, 1 },
+ { ahd_patch1_func, 419, 1, 2 },
+ { ahd_patch0_func, 420, 1, 1 },
+ { ahd_patch1_func, 422, 1, 2 },
+ { ahd_patch0_func, 423, 1, 1 },
+ { ahd_patch1_func, 431, 1, 2 },
+ { ahd_patch0_func, 432, 1, 1 },
+ { ahd_patch2_func, 445, 1, 2 },
+ { ahd_patch0_func, 446, 1, 1 },
+ { ahd_patch11_func, 482, 1, 1 },
+ { ahd_patch1_func, 490, 1, 2 },
+ { ahd_patch0_func, 491, 1, 1 },
+ { ahd_patch2_func, 503, 1, 2 },
+ { ahd_patch0_func, 504, 1, 1 },
+ { ahd_patch12_func, 507, 6, 2 },
+ { ahd_patch0_func, 513, 1, 1 },
+ { ahd_patch13_func, 534, 7, 1 },
+ { ahd_patch14_func, 543, 1, 1 },
+ { ahd_patch15_func, 552, 1, 1 },
+ { ahd_patch16_func, 553, 1, 2 },
+ { ahd_patch0_func, 554, 1, 1 },
+ { ahd_patch17_func, 557, 1, 1 },
+ { ahd_patch16_func, 558, 1, 1 },
+ { ahd_patch18_func, 569, 1, 2 },
+ { ahd_patch0_func, 570, 1, 1 },
+ { ahd_patch1_func, 589, 1, 2 },
{ ahd_patch0_func, 590, 1, 1 },
- { ahd_patch2_func, 594, 1, 2 },
- { ahd_patch0_func, 595, 1, 1 },
- { ahd_patch1_func, 596, 1, 2 },
- { ahd_patch0_func, 597, 1, 1 },
- { ahd_patch2_func, 608, 1, 2 },
- { ahd_patch0_func, 609, 1, 1 },
- { ahd_patch19_func, 613, 1, 1 },
- { ahd_patch20_func, 618, 1, 1 },
- { ahd_patch21_func, 619, 2, 1 },
- { ahd_patch20_func, 623, 1, 2 },
- { ahd_patch0_func, 624, 1, 1 },
- { ahd_patch2_func, 627, 1, 2 },
- { ahd_patch0_func, 628, 1, 1 },
- { ahd_patch2_func, 643, 1, 2 },
- { ahd_patch0_func, 644, 1, 1 },
- { ahd_patch13_func, 645, 14, 1 },
- { ahd_patch1_func, 663, 1, 2 },
- { ahd_patch0_func, 664, 1, 1 },
- { ahd_patch13_func, 665, 1, 1 },
- { ahd_patch1_func, 677, 1, 2 },
- { ahd_patch0_func, 678, 1, 1 },
- { ahd_patch1_func, 685, 1, 2 },
- { ahd_patch0_func, 686, 1, 1 },
- { ahd_patch19_func, 709, 1, 1 },
- { ahd_patch19_func, 747, 1, 1 },
- { ahd_patch1_func, 758, 1, 2 },
- { ahd_patch0_func, 759, 1, 1 },
- { ahd_patch1_func, 776, 1, 2 },
- { ahd_patch0_func, 777, 1, 1 },
- { ahd_patch1_func, 779, 1, 2 },
- { ahd_patch0_func, 780, 1, 1 },
- { ahd_patch1_func, 783, 1, 2 },
- { ahd_patch0_func, 784, 1, 1 },
- { ahd_patch22_func, 786, 1, 2 },
- { ahd_patch0_func, 787, 2, 1 },
- { ahd_patch23_func, 790, 4, 2 },
- { ahd_patch0_func, 794, 1, 1 },
- { ahd_patch23_func, 802, 11, 1 }
+ { ahd_patch1_func, 593, 1, 2 },
+ { ahd_patch0_func, 594, 1, 1 },
+ { ahd_patch2_func, 599, 1, 2 },
+ { ahd_patch0_func, 600, 1, 1 },
+ { ahd_patch2_func, 604, 1, 2 },
+ { ahd_patch0_func, 605, 1, 1 },
+ { ahd_patch1_func, 606, 1, 2 },
+ { ahd_patch0_func, 607, 1, 1 },
+ { ahd_patch2_func, 618, 1, 2 },
+ { ahd_patch0_func, 619, 1, 1 },
+ { ahd_patch19_func, 623, 1, 1 },
+ { ahd_patch20_func, 628, 1, 1 },
+ { ahd_patch21_func, 629, 2, 1 },
+ { ahd_patch20_func, 633, 1, 2 },
+ { ahd_patch0_func, 634, 1, 1 },
+ { ahd_patch2_func, 637, 1, 2 },
+ { ahd_patch0_func, 638, 1, 1 },
+ { ahd_patch2_func, 653, 1, 2 },
+ { ahd_patch0_func, 654, 1, 1 },
+ { ahd_patch13_func, 655, 14, 1 },
+ { ahd_patch1_func, 673, 1, 2 },
+ { ahd_patch0_func, 674, 1, 1 },
+ { ahd_patch13_func, 675, 1, 1 },
+ { ahd_patch1_func, 687, 1, 2 },
+ { ahd_patch0_func, 688, 1, 1 },
+ { ahd_patch1_func, 695, 1, 2 },
+ { ahd_patch0_func, 696, 1, 1 },
+ { ahd_patch19_func, 719, 1, 1 },
+ { ahd_patch19_func, 757, 1, 1 },
+ { ahd_patch1_func, 768, 1, 2 },
+ { ahd_patch0_func, 769, 1, 1 },
+ { ahd_patch7_func, 785, 3, 1 },
+ { ahd_patch1_func, 789, 1, 2 },
+ { ahd_patch0_func, 790, 1, 1 },
+ { ahd_patch1_func, 792, 1, 2 },
+ { ahd_patch0_func, 793, 1, 1 },
+ { ahd_patch1_func, 796, 1, 2 },
+ { ahd_patch0_func, 797, 1, 1 },
+ { ahd_patch22_func, 799, 1, 2 },
+ { ahd_patch0_func, 800, 2, 1 },
+ { ahd_patch23_func, 803, 4, 2 },
+ { ahd_patch0_func, 807, 1, 1 },
+ { ahd_patch23_func, 815, 11, 1 }
};
static struct cs {
uint16_t begin;
uint16_t end;
} critical_sections[] = {
- { 17, 28 },
- { 29, 30 },
+ { 17, 30 },
{ 47, 58 },
{ 61, 63 },
{ 65, 66 },
{ 72, 92 },
- { 110, 137 },
- { 138, 175 },
- { 180, 188 },
- { 213, 264 },
- { 425, 433 },
- { 443, 445 },
- { 448, 457 },
- { 709, 739 },
- { 749, 753 }
+ { 110, 142 },
+ { 143, 180 },
+ { 185, 193 },
+ { 218, 274 },
+ { 435, 443 },
+ { 453, 455 },
+ { 458, 467 },
+ { 719, 749 },
+ { 759, 763 }
};
static const int num_critical_sections = sizeof(critical_sections)
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm.c b/drivers/scsi/aic7xxx/aicasm/aicasm.c
index f936b69..9241027 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm.c
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm.c
@@ -37,7 +37,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#22 $
+ * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#23 $
*
* $FreeBSD$
*/
@@ -609,10 +609,10 @@
while (line < cur_instr->srcline) {
fgets(buf, sizeof(buf), ifile);
- fprintf(listfile, "\t\t%s", buf);
+ fprintf(listfile, " \t%s", buf);
line++;
}
- fprintf(listfile, "%03x %02x%02x%02x%02x", instrptr,
+ fprintf(listfile, "%04x %02x%02x%02x%02x", instrptr,
#ifdef __LITTLE_ENDIAN
cur_instr->format.bytes[0],
cur_instr->format.bytes[1],
@@ -624,14 +624,23 @@
cur_instr->format.bytes[1],
cur_instr->format.bytes[0]);
#endif
- fgets(buf, sizeof(buf), ifile);
- fprintf(listfile, "\t%s", buf);
- line++;
+ /*
+ * Macro expansions can cause several instructions
+ * to be output for a single source line. Only
+ * advance the line once in these cases.
+ */
+ if (line == cur_instr->srcline) {
+ fgets(buf, sizeof(buf), ifile);
+ fprintf(listfile, "\t%s", buf);
+ line++;
+ } else {
+ fprintf(listfile, "\n");
+ }
instrptr++;
}
/* Dump the remainder of the file */
while(fgets(buf, sizeof(buf), ifile) != NULL)
- fprintf(listfile, "\t\t%s", buf);
+ fprintf(listfile, " %s", buf);
fclose(ifile);
}
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
index 67e046d..c328596 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
@@ -38,7 +38,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_gram.y#29 $
+ * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_gram.y#30 $
*
* $FreeBSD$
*/
@@ -157,6 +157,8 @@
%token T_END_CS
+%token T_PAD_PAGE
+
%token T_FIELD
%token T_ENUM
@@ -189,6 +191,10 @@
%token <value> T_OR
+/* 16 bit extensions */
+%token <value> T_OR16 T_AND16 T_XOR16 T_ADD16
+%token <value> T_ADC16 T_MVI16 T_TEST16 T_CMP16 T_CMPXCHG
+
%token T_RET
%token T_NOP
@@ -207,7 +213,7 @@
%type <expression> expression immediate immediate_or_a
-%type <value> export ret f1_opcode f2_opcode jmp_jc_jnc_call jz_jnz je_jne
+%type <value> export ret f1_opcode f2_opcode f4_opcode jmp_jc_jnc_call jz_jnz je_jne
%type <value> mode_value mode_list macro_arglist
@@ -1304,6 +1310,15 @@
| T_ROR { $$ = AIC_OP_ROR; }
;
+f4_opcode:
+ T_OR16 { $$ = AIC_OP_OR16; }
+| T_AND16 { $$ = AIC_OP_AND16; }
+| T_XOR16 { $$ = AIC_OP_XOR16; }
+| T_ADD16 { $$ = AIC_OP_ADD16; }
+| T_ADC16 { $$ = AIC_OP_ADC16; }
+| T_MVI16 { $$ = AIC_OP_MVI16; }
+;
+
code:
f2_opcode destination ',' expression opt_source ret ';'
{
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h b/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
index e64f802..9df9e2c 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
@@ -37,13 +37,14 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_insformat.h#11 $
+ * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_insformat.h#12 $
*
* $FreeBSD$
*/
#include <asm/byteorder.h>
+/* 8bit ALU logic operations */
struct ins_format1 {
#ifdef __LITTLE_ENDIAN
uint32_t immediate : 8,
@@ -62,6 +63,7 @@
#endif
};
+/* 8bit ALU shift/rotate operations */
struct ins_format2 {
#ifdef __LITTLE_ENDIAN
uint32_t shift_control : 8,
@@ -80,6 +82,7 @@
#endif
};
+/* 8bit branch control operations */
struct ins_format3 {
#ifdef __LITTLE_ENDIAN
uint32_t immediate : 8,
@@ -96,10 +99,68 @@
#endif
};
+/* 16bit ALU logic operations */
+struct ins_format4 {
+#ifdef __LITTLE_ENDIAN
+ uint32_t opcode_ext : 8,
+ source : 9,
+ destination : 9,
+ ret : 1,
+ opcode : 4,
+ parity : 1;
+#else
+ uint32_t parity : 1,
+ opcode : 4,
+ ret : 1,
+ destination : 9,
+ source : 9,
+ opcode_ext : 8;
+#endif
+};
+
+/* 16bit branch control operations */
+struct ins_format5 {
+#ifdef __LITTLE_ENDIAN
+ uint32_t opcode_ext : 8,
+ source : 9,
+ address : 10,
+ opcode : 4,
+ parity : 1;
+#else
+ uint32_t parity : 1,
+ opcode : 4,
+ address : 10,
+ source : 9,
+ opcode_ext : 8;
+#endif
+};
+
+/* Far branch operations */
+struct ins_format6 {
+#ifdef __LITTLE_ENDIAN
+ uint32_t page : 3,
+ opcode_ext : 5,
+ source : 9,
+ address : 10,
+ opcode : 4,
+ parity : 1;
+#else
+ uint32_t parity : 1,
+ opcode : 4,
+ address : 10,
+ source : 9,
+ opcode_ext : 5,
+ page : 3;
+#endif
+};
+
union ins_formats {
struct ins_format1 format1;
struct ins_format2 format2;
struct ins_format3 format3;
+ struct ins_format4 format4;
+ struct ins_format5 format5;
+ struct ins_format6 format6;
uint8_t bytes[4];
uint32_t integer;
};
@@ -118,6 +179,8 @@
#define AIC_OP_ROL 0x5
#define AIC_OP_BMOV 0x6
+#define AIC_OP_MVI16 0x7
+
#define AIC_OP_JMP 0x8
#define AIC_OP_JC 0x9
#define AIC_OP_JNC 0xa
@@ -131,3 +194,26 @@
#define AIC_OP_SHL 0x10
#define AIC_OP_SHR 0x20
#define AIC_OP_ROR 0x30
+
+/* 16bit Ops. Low byte main opcode. High byte extended opcode. */
+#define AIC_OP_OR16 0x8005
+#define AIC_OP_AND16 0x8105
+#define AIC_OP_XOR16 0x8205
+#define AIC_OP_ADD16 0x8305
+#define AIC_OP_ADC16 0x8405
+#define AIC_OP_JNE16 0x8805
+#define AIC_OP_JNZ16 0x8905
+#define AIC_OP_JE16 0x8C05
+#define AIC_OP_JZ16 0x8B05
+#define AIC_OP_JMP16 0x9005
+#define AIC_OP_JC16 0x9105
+#define AIC_OP_JNC16 0x9205
+#define AIC_OP_CALL16 0x9305
+#define AIC_OP_CALL16 0x9305
+
+/* Page extension is low three bits of second opcode byte. */
+#define AIC_OP_JMPF 0xA005
+#define AIC_OP_CALLF 0xB005
+#define AIC_OP_JCF 0xC005
+#define AIC_OP_JNCF 0xD005
+#define AIC_OP_CMPXCHG 0xE005
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l b/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l
index 45c0b23..7c3983f 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l
@@ -38,7 +38,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_scan.l#19 $
+ * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_scan.l#20 $
*
* $FreeBSD$
*/
@@ -132,7 +132,7 @@
*string_buf_ptr++ = *yptr++;
}
}
-
+else { return T_ELSE; }
VERSION { return T_VERSION; }
PREFIX { return T_PREFIX; }
PATCH_ARG_LIST { return T_PATCH_ARG_LIST; }
@@ -173,10 +173,6 @@
yylval.value = WO;
return T_MODE;
}
-BEGIN_CRITICAL { return T_BEGIN_CS; }
-END_CRITICAL { return T_END_CS; }
-SET_SRC_MODE { return T_SET_SRC_MODE; }
-SET_DST_MODE { return T_SET_DST_MODE; }
field { return T_FIELD; }
enum { return T_ENUM; }
mask { return T_MASK; }
@@ -192,6 +188,13 @@
sindex { return T_SINDEX; }
A { return T_A; }
+ /* Instruction Formatting */
+PAD_PAGE { return T_PAD_PAGE; }
+BEGIN_CRITICAL { return T_BEGIN_CS; }
+END_CRITICAL { return T_END_CS; }
+SET_SRC_MODE { return T_SET_SRC_MODE; }
+SET_DST_MODE { return T_SET_DST_MODE; }
+
/* Opcodes */
shl { return T_SHL; }
shr { return T_SHR; }
@@ -223,7 +226,17 @@
or { return T_OR; }
ret { return T_RET; }
nop { return T_NOP; }
-else { return T_ELSE; }
+
+ /* ARP2 16bit extensions */
+or16 { return T_OR16; }
+and16 { return T_AND16; }
+xor16 { return T_XOR16; }
+add16 { return T_ADD16; }
+adc16 { return T_ADC16; }
+mvi16 { return T_MVI16; }
+test16 { return T_TEST16; }
+cmp16 { return T_CMP16; }
+cmpxchg { return T_CMPXCHG; }
/* Allowed Symbols */
\<\< { return T_EXPR_LSHIFT; }
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 19d8d4b..49cc420 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -630,6 +630,7 @@
/**
* piix_check_450nx_errata - Check for problem 450NX setup
+ * @ata_dev: the PCI device to check
*
* Check for the present of 450NX errata #19 and errata #25. If
* they are found return an error code so we can turn off DMA
@@ -713,7 +714,7 @@
pci_read_config_byte(pdev, ICH5_PMR, &tmp);
if (host_flags & PIIX_FLAG_COMBINED_ICH6) {
- switch (tmp) {
+ switch (tmp & 0x3) {
case 0:
break;
case 1:
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index c8a32cf..cbf8252 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -246,6 +246,7 @@
* total_xfer_length in xferred. These values are restored in
* pci_unmap_srb_sense. This is the only place xferred is used.
*/
+ unsigned char *virt_addr_req; /* Saved virtual address of the request buffer */
u32 xferred; /* Saved copy of total_xfer_length */
u16 state;
@@ -2017,7 +2018,7 @@
sg_verify_length(srb);
/* we need the corresponding virtual address */
- if (!segment) {
+ if (!segment || (srb->flag & AUTO_REQSENSE)) {
srb->virt_addr += xferred;
return;
}
@@ -3318,6 +3319,7 @@
srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].address;
srb->segment_x[0].length =
srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].length;
+ srb->virt_addr = srb->virt_addr_req;
}
@@ -3711,6 +3713,8 @@
srb->xferred = srb->total_xfer_length;
/* srb->segment_x : a one entry of S/G list table */
srb->total_xfer_length = sizeof(cmd->sense_buffer);
+ srb->virt_addr_req = srb->virt_addr;
+ srb->virt_addr = cmd->sense_buffer;
srb->segment_x[0].length = sizeof(cmd->sense_buffer);
/* Map sense buffer */
srb->segment_x[0].address =
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 822b9fa..eaefedd 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -87,7 +87,7 @@
static int init_timeout = 5;
static int max_requests = 50;
-#define IBMVSCSI_VERSION "1.5.7"
+#define IBMVSCSI_VERSION "1.5.8"
MODULE_DESCRIPTION("IBM Virtual SCSI");
MODULE_AUTHOR("Dave Boutcher");
@@ -534,7 +534,6 @@
static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct,
struct ibmvscsi_host_data *hostdata)
{
- struct scsi_cmnd *cmnd;
u64 *crq_as_u64 = (u64 *) &evt_struct->crq;
int rc;
@@ -544,19 +543,8 @@
* can handle more requests (can_queue) when we actually can't
*/
if ((evt_struct->crq.format == VIOSRP_SRP_FORMAT) &&
- (atomic_dec_if_positive(&hostdata->request_limit) < 0)) {
- /* See if the adapter is disabled */
- if (atomic_read(&hostdata->request_limit) < 0)
- goto send_error;
-
- printk(KERN_WARNING
- "ibmvscsi: Warning, request_limit exceeded\n");
- unmap_cmd_data(&evt_struct->iu.srp.cmd,
- evt_struct,
- hostdata->dev);
- free_event_struct(&hostdata->pool, evt_struct);
- return SCSI_MLQUEUE_HOST_BUSY;
- }
+ (atomic_dec_if_positive(&hostdata->request_limit) < 0))
+ goto send_error;
/* Copy the IU into the transfer area */
*evt_struct->xfer_iu = evt_struct->iu;
@@ -572,7 +560,7 @@
ibmvscsi_send_crq(hostdata, crq_as_u64[0], crq_as_u64[1])) != 0) {
list_del(&evt_struct->list);
- printk(KERN_ERR "ibmvscsi: failed to send event struct rc %d\n",
+ printk(KERN_ERR "ibmvscsi: send error %d\n",
rc);
goto send_error;
}
@@ -582,14 +570,8 @@
send_error:
unmap_cmd_data(&evt_struct->iu.srp.cmd, evt_struct, hostdata->dev);
- if ((cmnd = evt_struct->cmnd) != NULL) {
- cmnd->result = DID_ERROR << 16;
- evt_struct->cmnd_done(cmnd);
- } else if (evt_struct->done)
- evt_struct->done(evt_struct);
-
free_event_struct(&hostdata->pool, evt_struct);
- return 0;
+ return SCSI_MLQUEUE_HOST_BUSY;
}
/**
@@ -802,7 +784,8 @@
case SRP_LOGIN_RSP_TYPE: /* it worked! */
break;
case SRP_LOGIN_REJ_TYPE: /* refused! */
- printk(KERN_INFO "ibmvscsi: SRP_LOGIN_REQ rejected\n");
+ printk(KERN_INFO "ibmvscsi: SRP_LOGIN_REJ reason %u\n",
+ evt_struct->xfer_iu->srp.login_rej.reason);
/* Login failed. */
atomic_set(&hostdata->request_limit, -1);
return;
@@ -834,6 +817,9 @@
return;
}
+ /* If we had any pending I/Os, kick them */
+ scsi_unblock_requests(hostdata->host);
+
send_mad_adapter_info(hostdata);
return;
}
@@ -862,6 +848,7 @@
init_timeout * HZ);
login = &evt_struct->iu.srp.login_req;
+ memset(login, 0x00, sizeof(struct srp_login_req));
login->type = SRP_LOGIN_REQ_TYPE;
login->max_requested_initiator_to_target_iulen = sizeof(union srp_iu);
login->required_buffer_formats = 0x0006;
@@ -1122,7 +1109,7 @@
* purge_requests: Our virtual adapter just shut down. purge any sent requests
* @hostdata: the adapter
*/
-static void purge_requests(struct ibmvscsi_host_data *hostdata)
+static void purge_requests(struct ibmvscsi_host_data *hostdata, int error_code)
{
struct srp_event_struct *tmp_evt, *pos;
unsigned long flags;
@@ -1131,7 +1118,7 @@
list_for_each_entry_safe(tmp_evt, pos, &hostdata->sent, list) {
list_del(&tmp_evt->list);
if (tmp_evt->cmnd) {
- tmp_evt->cmnd->result = (DID_ERROR << 16);
+ tmp_evt->cmnd->result = (error_code << 16);
unmap_cmd_data(&tmp_evt->iu.srp.cmd,
tmp_evt,
tmp_evt->hostdata->dev);
@@ -1186,12 +1173,30 @@
printk(KERN_ERR "ibmvscsi: unknown crq message type\n");
}
return;
- case 0xFF: /* Hypervisor telling us the connection is closed */
- printk(KERN_INFO "ibmvscsi: Virtual adapter failed!\n");
+ case 0xFF: /* Hypervisor telling us the connection is closed */
+ scsi_block_requests(hostdata->host);
+ if (crq->format == 0x06) {
+ /* We need to re-setup the interpartition connection */
+ printk(KERN_INFO
+ "ibmvscsi: Re-enabling adapter!\n");
+ purge_requests(hostdata, DID_REQUEUE);
+ if (ibmvscsi_reenable_crq_queue(&hostdata->queue,
+ hostdata) == 0)
+ if (ibmvscsi_send_crq(hostdata,
+ 0xC001000000000000LL, 0))
+ printk(KERN_ERR
+ "ibmvscsi: transmit error after"
+ " enable\n");
+ } else {
+ printk(KERN_INFO
+ "ibmvscsi: Virtual adapter failed rc %d!\n",
+ crq->format);
- atomic_set(&hostdata->request_limit, -1);
- purge_requests(hostdata);
- ibmvscsi_reset_crq_queue(&hostdata->queue, hostdata);
+ atomic_set(&hostdata->request_limit, -1);
+ purge_requests(hostdata, DID_ERROR);
+ ibmvscsi_reset_crq_queue(&hostdata->queue, hostdata);
+ }
+ scsi_unblock_requests(hostdata->host);
return;
case 0x80: /* real payload */
break;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h
index 5b0edd1..4550d71 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.h
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.h
@@ -103,6 +103,9 @@
int ibmvscsi_reset_crq_queue(struct crq_queue *queue,
struct ibmvscsi_host_data *hostdata);
+int ibmvscsi_reenable_crq_queue(struct crq_queue *queue,
+ struct ibmvscsi_host_data *hostdata);
+
void ibmvscsi_handle_crq(struct viosrp_crq *crq,
struct ibmvscsi_host_data *hostdata);
int ibmvscsi_send_crq(struct ibmvscsi_host_data *hostdata,
diff --git a/drivers/scsi/ibmvscsi/iseries_vscsi.c b/drivers/scsi/ibmvscsi/iseries_vscsi.c
index ce15d9e..7eed0b0 100644
--- a/drivers/scsi/ibmvscsi/iseries_vscsi.c
+++ b/drivers/scsi/ibmvscsi/iseries_vscsi.c
@@ -124,6 +124,19 @@
}
/**
+ * reenable_crq_queue: - reenables a crq after a failure
+ * @queue: crq_queue to initialize and register
+ * @hostdata: ibmvscsi_host_data of host
+ *
+ * no-op for iSeries
+ */
+int ibmvscsi_reenable_crq_queue(struct crq_queue *queue,
+ struct ibmvscsi_host_data *hostdata)
+{
+ return 0;
+}
+
+/**
* ibmvscsi_send_crq: - Send a CRQ
* @hostdata: the adapter
* @word1: the first 64 bits of the data
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
index 75db2f5..f47dd87 100644
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -281,6 +281,28 @@
}
/**
+ * reenable_crq_queue: - reenables a crq after
+ * @queue: crq_queue to initialize and register
+ * @hostdata: ibmvscsi_host_data of host
+ *
+ */
+int ibmvscsi_reenable_crq_queue(struct crq_queue *queue,
+ struct ibmvscsi_host_data *hostdata)
+{
+ int rc;
+ struct vio_dev *vdev = to_vio_dev(hostdata->dev);
+
+ /* Re-enable the CRQ */
+ do {
+ rc = plpar_hcall_norets(H_ENABLE_CRQ, vdev->unit_address);
+ } while ((rc == H_InProgress) || (rc == H_Busy) || (H_isLongBusy(rc)));
+
+ if (rc)
+ printk(KERN_ERR "ibmvscsi: Error %d enabling adapter\n", rc);
+ return rc;
+}
+
+/**
* reset_crq_queue: - resets a crq after a failure
* @queue: crq_queue to initialize and register
* @hostdata: ibmvscsi_host_data of host
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 3c688ef..0cf0e4c 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -751,9 +751,8 @@
idescsi_add_settings(drive);
}
-static int ide_scsi_remove(struct device *dev)
+static void ide_scsi_remove(ide_drive_t *drive)
{
- ide_drive_t *drive = to_ide_device(dev);
struct Scsi_Host *scsihost = drive->driver_data;
struct ide_scsi_obj *scsi = scsihost_to_idescsi(scsihost);
struct gendisk *g = scsi->disk;
@@ -768,11 +767,9 @@
scsi_remove_host(scsihost);
ide_scsi_put(scsi);
-
- return 0;
}
-static int ide_scsi_probe(struct device *);
+static int ide_scsi_probe(ide_drive_t *);
#ifdef CONFIG_PROC_FS
static ide_proc_entry_t idescsi_proc[] = {
@@ -788,9 +785,9 @@
.owner = THIS_MODULE,
.name = "ide-scsi",
.bus = &ide_bus_type,
- .probe = ide_scsi_probe,
- .remove = ide_scsi_remove,
},
+ .probe = ide_scsi_probe,
+ .remove = ide_scsi_remove,
.version = IDESCSI_VERSION,
.media = ide_scsi,
.supports_dsc_overlap = 0,
@@ -1119,9 +1116,8 @@
.proc_name = "ide-scsi",
};
-static int ide_scsi_probe(struct device *dev)
+static int ide_scsi_probe(ide_drive_t *drive)
{
- ide_drive_t *drive = to_ide_device(dev);
idescsi_scsi_t *idescsi;
struct Scsi_Host *host;
struct gendisk *g;
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index e5e1ca4..86c5461 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -3499,6 +3499,7 @@
int device_error;
uint32_t transfer_len;
IPS_DCDB_TABLE_TAPE *tapeDCDB;
+ IPS_SCSI_INQ_DATA inquiryData;
METHOD_TRACE("ips_map_status", 1);
@@ -3557,13 +3558,13 @@
errcode = DID_OK;
/* Restrict access to physical DASD */
- if ((scb->scsi_cmd->cmnd[0] == INQUIRY) &&
- ((((char *) scb->scsi_cmd->
- buffer)[0] & 0x1f) == TYPE_DISK)) {
- /* underflow -- no error */
- /* restrict access to physical DASD */
- errcode = DID_TIME_OUT;
- break;
+ if (scb->scsi_cmd->cmnd[0] == INQUIRY) {
+ ips_scmd_buf_read(scb->scsi_cmd,
+ &inquiryData, sizeof (inquiryData));
+ if ((inquiryData.DeviceType & 0x1f) == TYPE_DISK) {
+ errcode = DID_TIME_OUT;
+ break;
+ }
}
} else
errcode = DID_ERROR;
@@ -4135,6 +4136,7 @@
uint8_t basic_status;
uint8_t ext_status;
int errcode;
+ IPS_SCSI_INQ_DATA inquiryData;
METHOD_TRACE("ips_chkstatus", 1);
@@ -4255,11 +4257,11 @@
scb->scsi_cmd->result = errcode << 16;
} else { /* bus == 0 */
/* restrict access to physical drives */
- if ((scb->scsi_cmd->cmnd[0] == INQUIRY) &&
- ((((char *) scb->scsi_cmd->buffer)[0] & 0x1f) ==
- TYPE_DISK)) {
-
- scb->scsi_cmd->result = DID_TIME_OUT << 16;
+ if (scb->scsi_cmd->cmnd[0] == INQUIRY) {
+ ips_scmd_buf_read(scb->scsi_cmd,
+ &inquiryData, sizeof (inquiryData));
+ if ((inquiryData.DeviceType & 0x1f) == TYPE_DISK)
+ scb->scsi_cmd->result = DID_TIME_OUT << 16;
}
} /* else */
} else { /* recovered error / success */
@@ -5012,7 +5014,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (j >= 45)
@@ -5038,7 +5040,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (j >= 240)
@@ -5056,7 +5058,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (i >= 240)
@@ -5106,7 +5108,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (j >= 45)
@@ -5132,7 +5134,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (j >= 240)
@@ -5150,7 +5152,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (i >= 240)
@@ -5202,7 +5204,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (i >= 45) {
@@ -5228,7 +5230,7 @@
if (Post != 0x4F00)
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (i >= 120) {
@@ -5258,7 +5260,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (i >= 240) {
@@ -5318,12 +5320,12 @@
outb(IPS_BIT_RST, ha->io_addr + IPS_REG_SCPR);
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
outb(0, ha->io_addr + IPS_REG_SCPR);
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
if ((*ha->func.init) (ha))
break;
@@ -5363,12 +5365,12 @@
writeb(IPS_BIT_RST, ha->mem_ptr + IPS_REG_SCPR);
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
writeb(0, ha->mem_ptr + IPS_REG_SCPR);
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
if ((*ha->func.init) (ha))
break;
@@ -5409,7 +5411,7 @@
writel(0x80000000, ha->mem_ptr + IPS_REG_I960_IDR);
/* Delay for 5 Seconds */
- MDELAY(5 * IPS_ONE_SEC);
+ msleep(5 * IPS_ONE_SEC);
/* Do a PCI config read to wait for adapter */
pci_read_config_byte(ha->pcidev, 4, &junk);
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index ff31b0b..c93bb1b 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1075,13 +1075,59 @@
static inline void
ata_queue_pio_task(struct ata_port *ap)
{
- queue_work(ata_wq, &ap->pio_task);
+ if (!(ap->flags & ATA_FLAG_FLUSH_PIO_TASK))
+ queue_work(ata_wq, &ap->pio_task);
}
static inline void
ata_queue_delayed_pio_task(struct ata_port *ap, unsigned long delay)
{
- queue_delayed_work(ata_wq, &ap->pio_task, delay);
+ if (!(ap->flags & ATA_FLAG_FLUSH_PIO_TASK))
+ queue_delayed_work(ata_wq, &ap->pio_task, delay);
+}
+
+/**
+ * ata_flush_pio_tasks - Flush pio_task and packet_task
+ * @ap: the target ata_port
+ *
+ * After this function completes, pio_task and packet_task are
+ * guranteed not to be running or scheduled.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+
+static void ata_flush_pio_tasks(struct ata_port *ap)
+{
+ int tmp = 0;
+ unsigned long flags;
+
+ DPRINTK("ENTER\n");
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->flags |= ATA_FLAG_FLUSH_PIO_TASK;
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ DPRINTK("flush #1\n");
+ flush_workqueue(ata_wq);
+
+ /*
+ * At this point, if a task is running, it's guaranteed to see
+ * the FLUSH flag; thus, it will never queue pio tasks again.
+ * Cancel and flush.
+ */
+ tmp |= cancel_delayed_work(&ap->pio_task);
+ tmp |= cancel_delayed_work(&ap->packet_task);
+ if (!tmp) {
+ DPRINTK("flush #2\n");
+ flush_workqueue(ata_wq);
+ }
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->flags &= ~ATA_FLAG_FLUSH_PIO_TASK;
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ DPRINTK("EXIT\n");
}
void ata_qc_complete_internal(struct ata_queued_cmd *qc)
@@ -1446,12 +1492,11 @@
}
/**
- * ata_dev_config - Run device specific handlers and check for
- * SATA->PATA bridges
- * @ap: Bus
- * @i: Device
+ * ata_dev_config - Run device specific handlers & check for SATA->PATA bridges
+ * @ap: Bus
+ * @i: Device
*
- * LOCKING:
+ * LOCKING:
*/
void ata_dev_config(struct ata_port *ap, unsigned int i)
@@ -1798,9 +1843,9 @@
ata_timing_quantize(t, t, T, UT);
/*
- * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T
- * and some other commands. We have to ensure that the DMA cycle timing is
- * slower/equal than the fastest PIO timing.
+ * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
+ * S.M.A.R.T * and some other commands. We have to ensure that the
+ * DMA cycle timing is slower/equal than the fastest PIO timing.
*/
if (speed > XFER_PIO_4) {
@@ -1809,7 +1854,7 @@
}
/*
- * Lenghten active & recovery time so that cycle time is correct.
+ * Lengthen active & recovery time so that cycle time is correct.
*/
if (t->act8b + t->rec8b < t->cyc8b) {
@@ -1928,7 +1973,6 @@
*
* LOCKING:
* PCI/etc. bus probe sem.
- *
*/
static void ata_set_mode(struct ata_port *ap)
{
@@ -1977,7 +2021,6 @@
* or a timeout occurs.
*
* LOCKING: None.
- *
*/
unsigned int ata_busy_sleep (struct ata_port *ap,
@@ -2237,6 +2280,324 @@
DPRINTK("EXIT\n");
}
+static int sata_phy_resume(struct ata_port *ap)
+{
+ unsigned long timeout = jiffies + (HZ * 5);
+ u32 sstatus;
+
+ scr_write_flush(ap, SCR_CONTROL, 0x300);
+
+ /* Wait for phy to become ready, if necessary. */
+ do {
+ msleep(200);
+ sstatus = scr_read(ap, SCR_STATUS);
+ if ((sstatus & 0xf) != 1)
+ return 0;
+ } while (time_before(jiffies, timeout));
+
+ return -1;
+}
+
+/**
+ * ata_std_probeinit - initialize probing
+ * @ap: port to be probed
+ *
+ * @ap is about to be probed. Initialize it. This function is
+ * to be used as standard callback for ata_drive_probe_reset().
+ */
+extern void ata_std_probeinit(struct ata_port *ap)
+{
+ if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read)
+ sata_phy_resume(ap);
+}
+
+/**
+ * ata_std_softreset - reset host port via ATA SRST
+ * @ap: port to reset
+ * @verbose: fail verbosely
+ * @classes: resulting classes of attached devices
+ *
+ * Reset host port using ATA SRST. This function is to be used
+ * as standard callback for ata_drive_*_reset() functions.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes)
+{
+ unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
+ unsigned int devmask = 0, err_mask;
+ u8 err;
+
+ DPRINTK("ENTER\n");
+
+ /* determine if device 0/1 are present */
+ if (ata_devchk(ap, 0))
+ devmask |= (1 << 0);
+ if (slave_possible && ata_devchk(ap, 1))
+ devmask |= (1 << 1);
+
+ /* devchk reports device presence without actual device on
+ * most SATA controllers. Check SStatus and turn devmask off
+ * if link is offline. Note that we should continue resetting
+ * even when it seems like there's no device.
+ */
+ if (ap->ops->scr_read && !sata_dev_present(ap))
+ devmask = 0;
+
+ /* select device 0 again */
+ ap->ops->dev_select(ap, 0);
+
+ /* issue bus reset */
+ DPRINTK("about to softreset, devmask=%x\n", devmask);
+ err_mask = ata_bus_softreset(ap, devmask);
+ if (err_mask) {
+ if (verbose)
+ printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n",
+ ap->id, err_mask);
+ else
+ DPRINTK("EXIT, softreset failed (err_mask=0x%x)\n",
+ err_mask);
+ return -EIO;
+ }
+
+ /* determine by signature whether we have ATA or ATAPI devices */
+ classes[0] = ata_dev_try_classify(ap, 0, &err);
+ if (slave_possible && err != 0x81)
+ classes[1] = ata_dev_try_classify(ap, 1, &err);
+
+ DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
+ return 0;
+}
+
+/**
+ * sata_std_hardreset - reset host port via SATA phy reset
+ * @ap: port to reset
+ * @verbose: fail verbosely
+ * @class: resulting class of attached device
+ *
+ * SATA phy-reset host port using DET bits of SControl register.
+ * This function is to be used as standard callback for
+ * ata_drive_*_reset().
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class)
+{
+ u32 serror;
+
+ DPRINTK("ENTER\n");
+
+ /* Issue phy wake/reset */
+ scr_write_flush(ap, SCR_CONTROL, 0x301);
+
+ /*
+ * Couldn't find anything in SATA I/II specs, but AHCI-1.1
+ * 10.4.2 says at least 1 ms.
+ */
+ msleep(1);
+
+ /* Bring phy back */
+ sata_phy_resume(ap);
+
+ /* Clear SError */
+ serror = scr_read(ap, SCR_ERROR);
+ scr_write(ap, SCR_ERROR, serror);
+
+ /* TODO: phy layer with polling, timeouts, etc. */
+ if (!sata_dev_present(ap)) {
+ *class = ATA_DEV_NONE;
+ DPRINTK("EXIT, link offline\n");
+ return 0;
+ }
+
+ if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
+ if (verbose)
+ printk(KERN_ERR "ata%u: COMRESET failed "
+ "(device not ready)\n", ap->id);
+ else
+ DPRINTK("EXIT, device not ready\n");
+ return -EIO;
+ }
+
+ *class = ata_dev_try_classify(ap, 0, NULL);
+
+ DPRINTK("EXIT, class=%u\n", *class);
+ return 0;
+}
+
+/**
+ * ata_std_postreset - standard postreset callback
+ * @ap: the target ata_port
+ * @classes: classes of attached devices
+ *
+ * This function is invoked after a successful reset. Note that
+ * the device might have been reset more than once using
+ * different reset methods before postreset is invoked.
+ * postreset is also reponsible for setting cable type.
+ *
+ * This function is to be used as standard callback for
+ * ata_drive_*_reset().
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_std_postreset(struct ata_port *ap, unsigned int *classes)
+{
+ DPRINTK("ENTER\n");
+
+ /* set cable type */
+ if (ap->cbl == ATA_CBL_NONE && ap->flags & ATA_FLAG_SATA)
+ ap->cbl = ATA_CBL_SATA;
+
+ /* print link status */
+ if (ap->cbl == ATA_CBL_SATA)
+ sata_print_link_status(ap);
+
+ /* bail out if no device is present */
+ if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
+ DPRINTK("EXIT, no device\n");
+ return;
+ }
+
+ /* is double-select really necessary? */
+ if (classes[0] != ATA_DEV_NONE)
+ ap->ops->dev_select(ap, 1);
+ if (classes[1] != ATA_DEV_NONE)
+ ap->ops->dev_select(ap, 0);
+
+ /* re-enable interrupts & set up device control */
+ if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
+ ata_irq_on(ap);
+
+ DPRINTK("EXIT\n");
+}
+
+/**
+ * ata_std_probe_reset - standard probe reset method
+ * @ap: prot to perform probe-reset
+ * @classes: resulting classes of attached devices
+ *
+ * The stock off-the-shelf ->probe_reset method.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes)
+{
+ ata_reset_fn_t hardreset;
+
+ hardreset = NULL;
+ if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read)
+ hardreset = sata_std_hardreset;
+
+ return ata_drive_probe_reset(ap, ata_std_probeinit,
+ ata_std_softreset, hardreset,
+ ata_std_postreset, classes);
+}
+
+static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset,
+ ata_postreset_fn_t postreset,
+ unsigned int *classes)
+{
+ int i, rc;
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ classes[i] = ATA_DEV_UNKNOWN;
+
+ rc = reset(ap, 0, classes);
+ if (rc)
+ return rc;
+
+ /* If any class isn't ATA_DEV_UNKNOWN, consider classification
+ * is complete and convert all ATA_DEV_UNKNOWN to
+ * ATA_DEV_NONE.
+ */
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ if (classes[i] != ATA_DEV_UNKNOWN)
+ break;
+
+ if (i < ATA_MAX_DEVICES)
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ if (classes[i] == ATA_DEV_UNKNOWN)
+ classes[i] = ATA_DEV_NONE;
+
+ if (postreset)
+ postreset(ap, classes);
+
+ return classes[0] != ATA_DEV_UNKNOWN ? 0 : -ENODEV;
+}
+
+/**
+ * ata_drive_probe_reset - Perform probe reset with given methods
+ * @ap: port to reset
+ * @probeinit: probeinit method (can be NULL)
+ * @softreset: softreset method (can be NULL)
+ * @hardreset: hardreset method (can be NULL)
+ * @postreset: postreset method (can be NULL)
+ * @classes: resulting classes of attached devices
+ *
+ * Reset the specified port and classify attached devices using
+ * given methods. This function prefers softreset but tries all
+ * possible reset sequences to reset and classify devices. This
+ * function is intended to be used for constructing ->probe_reset
+ * callback by low level drivers.
+ *
+ * Reset methods should follow the following rules.
+ *
+ * - Return 0 on sucess, -errno on failure.
+ * - If classification is supported, fill classes[] with
+ * recognized class codes.
+ * - If classification is not supported, leave classes[] alone.
+ * - If verbose is non-zero, print error message on failure;
+ * otherwise, shut up.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -EINVAL if no reset method is avaliable, -ENODEV
+ * if classification fails, and any error code from reset
+ * methods.
+ */
+int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
+ ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
+ ata_postreset_fn_t postreset, unsigned int *classes)
+{
+ int rc = -EINVAL;
+
+ if (probeinit)
+ probeinit(ap);
+
+ if (softreset) {
+ rc = do_probe_reset(ap, softreset, postreset, classes);
+ if (rc == 0)
+ return 0;
+ }
+
+ if (!hardreset)
+ return rc;
+
+ rc = do_probe_reset(ap, hardreset, postreset, classes);
+ if (rc == 0 || rc != -ENODEV)
+ return rc;
+
+ if (softreset)
+ rc = do_probe_reset(ap, softreset, postreset, classes);
+
+ return rc;
+}
+
static void ata_pr_blacklisted(const struct ata_port *ap,
const struct ata_device *dev)
{
@@ -2913,7 +3274,7 @@
}
/**
- * ata_pio_poll -
+ * ata_pio_poll - poll using PIO, depending on current state
* @ap: the target ata_port
*
* LOCKING:
@@ -3021,7 +3382,7 @@
/**
- * swap_buf_le16 - swap halves of 16-words in place
+ * swap_buf_le16 - swap halves of 16-bit words in place
* @buf: Buffer to swap
* @buf_words: Number of 16-bit words in buffer.
*
@@ -3658,6 +4019,9 @@
DPRINTK("ENTER\n");
+ ata_flush_pio_tasks(ap);
+ ap->hsm_task_state = HSM_ST_IDLE;
+
spin_lock_irqsave(&host_set->lock, flags);
switch (qc->tf.protocol) {
@@ -4561,6 +4925,8 @@
/**
* ata_device_resume - wakeup a previously suspended devices
+ * @ap: port the device is connected to
+ * @dev: the device to resume
*
* Kick the drive back into action, by sending it an idle immediate
* command and making sure its transfer mode matches between drive
@@ -4583,10 +4949,11 @@
/**
* ata_device_suspend - prepare a device for suspend
+ * @ap: port the device is connected to
+ * @dev: the device to suspend
*
* Flush the cache on the drive, if appropriate, then issue a
* standbynow command.
- *
*/
int ata_device_suspend(struct ata_port *ap, struct ata_device *dev)
{
@@ -4869,9 +5236,9 @@
ap = host_set->ports[i];
- DPRINTK("ata%u: probe begin\n", ap->id);
+ DPRINTK("ata%u: bus probe begin\n", ap->id);
rc = ata_bus_probe(ap);
- DPRINTK("ata%u: probe end\n", ap->id);
+ DPRINTK("ata%u: bus probe end\n", ap->id);
if (rc) {
/* FIXME: do something useful here?
@@ -4895,7 +5262,7 @@
}
/* probes are done, now scan each port's disk(s) */
- DPRINTK("probe begin\n");
+ DPRINTK("host probe begin\n");
for (i = 0; i < count; i++) {
struct ata_port *ap = host_set->ports[i];
@@ -5459,6 +5826,12 @@
EXPORT_SYMBOL_GPL(sata_phy_reset);
EXPORT_SYMBOL_GPL(__sata_phy_reset);
EXPORT_SYMBOL_GPL(ata_bus_reset);
+EXPORT_SYMBOL_GPL(ata_std_probeinit);
+EXPORT_SYMBOL_GPL(ata_std_softreset);
+EXPORT_SYMBOL_GPL(sata_std_hardreset);
+EXPORT_SYMBOL_GPL(ata_std_postreset);
+EXPORT_SYMBOL_GPL(ata_std_probe_reset);
+EXPORT_SYMBOL_GPL(ata_drive_probe_reset);
EXPORT_SYMBOL_GPL(ata_port_disable);
EXPORT_SYMBOL_GPL(ata_ratelimit);
EXPORT_SYMBOL_GPL(ata_busy_sleep);
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index ab6b533..b007bb4 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -151,7 +151,7 @@
struct scsi_sense_hdr sshdr;
enum dma_data_direction data_dir;
- if (NULL == (void *)arg)
+ if (arg == NULL)
return -EINVAL;
if (copy_from_user(args, arg, sizeof(args)))
@@ -201,7 +201,7 @@
/* Need code to retrieve data from check condition? */
if ((argbuf)
- && copy_to_user((void *)(arg + sizeof(args)), argbuf, argsize))
+ && copy_to_user(arg + sizeof(args), argbuf, argsize))
rc = -EFAULT;
error:
if (argbuf)
@@ -228,7 +228,7 @@
u8 args[7];
struct scsi_sense_hdr sshdr;
- if (NULL == (void *)arg)
+ if (arg == NULL)
return -EINVAL;
if (copy_from_user(args, arg, sizeof(args)))
@@ -732,16 +732,27 @@
int ata_scsi_error(struct Scsi_Host *host)
{
struct ata_port *ap;
+ unsigned long flags;
DPRINTK("ENTER\n");
ap = (struct ata_port *) &host->hostdata[0];
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ assert(!(ap->flags & ATA_FLAG_IN_EH));
+ ap->flags |= ATA_FLAG_IN_EH;
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
ap->ops->eng_timeout(ap);
assert(host->host_failed == 0 && list_empty(&host->eh_cmd_q));
scsi_eh_flush_done_q(&ap->eh_done_q);
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->flags &= ~ATA_FLAG_IN_EH;
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
DPRINTK("EXIT\n");
return 0;
}
@@ -1742,6 +1753,31 @@
return sizeof(def_rw_recovery_mpage);
}
+/*
+ * We can turn this into a real blacklist if it's needed, for now just
+ * blacklist any Maxtor BANC1G10 revision firmware
+ */
+static int ata_dev_supports_fua(u16 *id)
+{
+ unsigned char model[41], fw[9];
+
+ if (!ata_id_has_fua(id))
+ return 0;
+
+ model[40] = '\0';
+ fw[8] = '\0';
+
+ ata_dev_id_string(id, model, ATA_ID_PROD_OFS, sizeof(model) - 1);
+ ata_dev_id_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw) - 1);
+
+ if (strncmp(model, "Maxtor", 6))
+ return 1;
+ if (strncmp(fw, "BANC1G10", 8))
+ return 1;
+
+ return 0; /* blacklisted */
+}
+
/**
* ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands
* @args: device IDENTIFY data / SCSI command of interest.
@@ -1839,7 +1875,7 @@
return 0;
dpofua = 0;
- if (ata_id_has_fua(args->id) && dev->flags & ATA_DFLAG_LBA48 &&
+ if (ata_dev_supports_fua(args->id) && dev->flags & ATA_DFLAG_LBA48 &&
(!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count))
dpofua = 1 << 4;
@@ -2533,7 +2569,8 @@
/**
* ata_scsi_simulate - simulate SCSI command on ATA device
- * @id: current IDENTIFY data for target device.
+ * @ap: port the device is connected to
+ * @dev: the target device
* @cmd: SCSI command being sent to device.
* @done: SCSI command completion function.
*
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index 311a412..93edaa8 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -537,9 +537,9 @@
free_irq(fp->intr, fp);
if (fp->regs)
- iounmap((void *) fp->regs);
+ iounmap(fp->regs);
if (fp->dma)
- iounmap((void *) fp->dma);
+ iounmap(fp->dma);
kfree(fp->dma_cmd_space);
scsi_host_put(host);
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 511ed52..a487f41 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -10,7 +10,7 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_sas.c
- * Version : v00.00.02.00-rc4
+ * Version : v00.00.02.02
*
* Authors:
* Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
@@ -55,13 +55,13 @@
{
PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_LSI_SAS1064R,
+ PCI_DEVICE_ID_LSI_SAS1064R, // xscale IOP
PCI_ANY_ID,
PCI_ANY_ID,
},
{
PCI_VENDOR_ID_DELL,
- PCI_DEVICE_ID_DELL_PERC5,
+ PCI_DEVICE_ID_DELL_PERC5, // xscale IOP
PCI_ANY_ID,
PCI_ANY_ID,
},
@@ -119,12 +119,18 @@
spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
}
+
/**
- * megasas_enable_intr - Enables interrupts
+* The following functions are defined for xscale
+* (deviceid : 1064R, PERC5) controllers
+*/
+
+/**
+ * megasas_enable_intr_xscale - Enables interrupts
* @regs: MFI register set
*/
static inline void
-megasas_enable_intr(struct megasas_register_set __iomem * regs)
+megasas_enable_intr_xscale(struct megasas_register_set __iomem * regs)
{
writel(1, &(regs)->outbound_intr_mask);
@@ -133,13 +139,73 @@
}
/**
+ * megasas_read_fw_status_reg_xscale - returns the current FW status value
+ * @regs: MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_xscale(struct megasas_register_set __iomem * regs)
+{
+ return readl(&(regs)->outbound_msg_0);
+}
+/**
+ * megasas_clear_interrupt_xscale - Check & clear interrupt
+ * @regs: MFI register set
+ */
+static int
+megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
+{
+ u32 status;
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(®s->outbound_intr_status);
+
+ if (!(status & MFI_OB_INTR_STATUS_MASK)) {
+ return 1;
+ }
+
+ /*
+ * Clear the interrupt by writing back the same value
+ */
+ writel(status, ®s->outbound_intr_status);
+
+ return 0;
+}
+
+/**
+ * megasas_fire_cmd_xscale - Sends command to the FW
+ * @frame_phys_addr : Physical address of cmd
+ * @frame_count : Number of frames for the command
+ * @regs : MFI register set
+ */
+static inline void
+megasas_fire_cmd_xscale(dma_addr_t frame_phys_addr,u32 frame_count, struct megasas_register_set __iomem *regs)
+{
+ writel((frame_phys_addr >> 3)|(frame_count),
+ &(regs)->inbound_queue_port);
+}
+
+static struct megasas_instance_template megasas_instance_template_xscale = {
+
+ .fire_cmd = megasas_fire_cmd_xscale,
+ .enable_intr = megasas_enable_intr_xscale,
+ .clear_intr = megasas_clear_intr_xscale,
+ .read_fw_status_reg = megasas_read_fw_status_reg_xscale,
+};
+
+/**
+* This is the end of set of functions & definitions specific
+* to xscale (deviceid : 1064R, PERC5) controllers
+*/
+
+/**
* megasas_disable_intr - Disables interrupts
* @regs: MFI register set
*/
static inline void
megasas_disable_intr(struct megasas_register_set __iomem * regs)
{
- u32 mask = readl(®s->outbound_intr_mask) & (~0x00000001);
+ u32 mask = 0x1f;
writel(mask, ®s->outbound_intr_mask);
/* Dummy readl to force pci flush */
@@ -167,8 +233,7 @@
/*
* Issue the frame using inbound queue port
*/
- writel(cmd->frame_phys_addr >> 3,
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
/*
* Wait for cmd_status to change
@@ -198,8 +263,7 @@
{
cmd->cmd_status = ENODATA;
- writel(cmd->frame_phys_addr >> 3,
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
wait_event(instance->int_cmd_wait_q, (cmd->cmd_status != ENODATA));
@@ -242,8 +306,7 @@
cmd->sync_cmd = 1;
cmd->cmd_status = 0xFF;
- writel(cmd->frame_phys_addr >> 3,
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
/*
* Wait for this cmd to complete
@@ -558,112 +621,29 @@
}
/**
- * megasas_build_cmd - Prepares a command packet
- * @instance: Adapter soft state
- * @scp: SCSI command
- * @frame_count: [OUT] Number of frames used to prepare this command
+ * megasas_is_ldio - Checks if the cmd is for logical drive
+ * @scmd: SCSI command
+ *
+ * Called by megasas_queue_command to find out if the command to be queued
+ * is a logical drive command
*/
-static struct megasas_cmd *megasas_build_cmd(struct megasas_instance
- *instance,
- struct scsi_cmnd *scp,
- int *frame_count)
+static inline int megasas_is_ldio(struct scsi_cmnd *cmd)
{
- u32 logical_cmd;
- struct megasas_cmd *cmd;
-
- /*
- * Find out if this is logical or physical drive command.
- */
- logical_cmd = MEGASAS_IS_LOGICAL(scp);
-
- /*
- * Logical drive command
- */
- if (logical_cmd) {
-
- if (scp->device->id >= MEGASAS_MAX_LD) {
- scp->result = DID_BAD_TARGET << 16;
- return NULL;
- }
-
- switch (scp->cmnd[0]) {
-
- case READ_10:
- case WRITE_10:
- case READ_12:
- case WRITE_12:
- case READ_6:
- case WRITE_6:
- case READ_16:
- case WRITE_16:
- /*
- * Fail for LUN > 0
- */
- if (scp->device->lun) {
- scp->result = DID_BAD_TARGET << 16;
- return NULL;
- }
-
- cmd = megasas_get_cmd(instance);
-
- if (!cmd) {
- scp->result = DID_IMM_RETRY << 16;
- return NULL;
- }
-
- *frame_count = megasas_build_ldio(instance, scp, cmd);
-
- if (!(*frame_count)) {
- megasas_return_cmd(instance, cmd);
- return NULL;
- }
-
- return cmd;
-
- default:
- /*
- * Fail for LUN > 0
- */
- if (scp->device->lun) {
- scp->result = DID_BAD_TARGET << 16;
- return NULL;
- }
-
- cmd = megasas_get_cmd(instance);
-
- if (!cmd) {
- scp->result = DID_IMM_RETRY << 16;
- return NULL;
- }
-
- *frame_count = megasas_build_dcdb(instance, scp, cmd);
-
- if (!(*frame_count)) {
- megasas_return_cmd(instance, cmd);
- return NULL;
- }
-
- return cmd;
- }
- } else {
- cmd = megasas_get_cmd(instance);
-
- if (!cmd) {
- scp->result = DID_IMM_RETRY << 16;
- return NULL;
- }
-
- *frame_count = megasas_build_dcdb(instance, scp, cmd);
-
- if (!(*frame_count)) {
- megasas_return_cmd(instance, cmd);
- return NULL;
- }
-
- return cmd;
+ if (!MEGASAS_IS_LOGICAL(cmd))
+ return 0;
+ switch (cmd->cmnd[0]) {
+ case READ_10:
+ case WRITE_10:
+ case READ_12:
+ case WRITE_12:
+ case READ_6:
+ case WRITE_6:
+ case READ_16:
+ case WRITE_16:
+ return 1;
+ default:
+ return 0;
}
-
- return NULL;
}
/**
@@ -684,13 +664,27 @@
scmd->scsi_done = done;
scmd->result = 0;
- cmd = megasas_build_cmd(instance, scmd, &frame_count);
-
- if (!cmd) {
- done(scmd);
- return 0;
+ if (MEGASAS_IS_LOGICAL(scmd) &&
+ (scmd->device->id >= MEGASAS_MAX_LD || scmd->device->lun)) {
+ scmd->result = DID_BAD_TARGET << 16;
+ goto out_done;
}
+ cmd = megasas_get_cmd(instance);
+ if (!cmd)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ /*
+ * Logical drive command
+ */
+ if (megasas_is_ldio(scmd))
+ frame_count = megasas_build_ldio(instance, scmd, cmd);
+ else
+ frame_count = megasas_build_dcdb(instance, scmd, cmd);
+
+ if (!frame_count)
+ goto out_return_cmd;
+
cmd->scmd = scmd;
scmd->SCp.ptr = (char *)cmd;
scmd->SCp.sent_command = jiffies;
@@ -702,10 +696,15 @@
instance->fw_outstanding++;
spin_unlock_irqrestore(&instance->instance_lock, flags);
- writel(((cmd->frame_phys_addr >> 3) | (cmd->frame_count - 1)),
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,cmd->frame_count-1,instance->reg_set);
return 0;
+
+ out_return_cmd:
+ megasas_return_cmd(instance, cmd);
+ out_done:
+ done(scmd);
+ return 0;
}
/**
@@ -1108,7 +1107,6 @@
static int
megasas_deplete_reply_queue(struct megasas_instance *instance, u8 alt_status)
{
- u32 status;
u32 producer;
u32 consumer;
u32 context;
@@ -1116,17 +1114,10 @@
/*
* Check if it is our interrupt
+ * Clear the interrupt
*/
- status = readl(&instance->reg_set->outbound_intr_status);
-
- if (!(status & MFI_OB_INTR_STATUS_MASK)) {
+ if(instance->instancet->clear_intr(instance->reg_set))
return IRQ_NONE;
- }
-
- /*
- * Clear the interrupt by writing back the same value
- */
- writel(status, &instance->reg_set->outbound_intr_status);
producer = *instance->producer;
consumer = *instance->consumer;
@@ -1160,7 +1151,7 @@
/**
* megasas_transition_to_ready - Move the FW to READY state
- * @reg_set: MFI register set
+ * @instance: Adapter soft state
*
* During the initialization, FW passes can potentially be in any one of
* several possible states. If the FW in operational, waiting-for-handshake
@@ -1168,14 +1159,14 @@
* has to wait for the ready state.
*/
static int
-megasas_transition_to_ready(struct megasas_register_set __iomem * reg_set)
+megasas_transition_to_ready(struct megasas_instance* instance)
{
int i;
u8 max_wait;
u32 fw_state;
u32 cur_state;
- fw_state = readl(®_set->outbound_msg_0) & MFI_STATE_MASK;
+ fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
while (fw_state != MFI_STATE_READY) {
@@ -1193,7 +1184,7 @@
* Set the CLR bit in inbound doorbell
*/
writel(MFI_INIT_CLEAR_HANDSHAKE,
- ®_set->inbound_doorbell);
+ &instance->reg_set->inbound_doorbell);
max_wait = 2;
cur_state = MFI_STATE_WAIT_HANDSHAKE;
@@ -1203,8 +1194,8 @@
/*
* Bring it to READY state; assuming max wait 2 secs
*/
- megasas_disable_intr(reg_set);
- writel(MFI_INIT_READY, ®_set->inbound_doorbell);
+ megasas_disable_intr(instance->reg_set);
+ writel(MFI_INIT_READY, &instance->reg_set->inbound_doorbell);
max_wait = 10;
cur_state = MFI_STATE_OPERATIONAL;
@@ -1253,8 +1244,8 @@
* The cur_state should not last for more than max_wait secs
*/
for (i = 0; i < (max_wait * 1000); i++) {
- fw_state = MFI_STATE_MASK &
- readl(®_set->outbound_msg_0);
+ fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) &
+ MFI_STATE_MASK ;
if (fw_state == cur_state) {
msleep(1);
@@ -1616,18 +1607,20 @@
reg_set = instance->reg_set;
+ instance->instancet = &megasas_instance_template_xscale;
+
/*
* We expect the FW state to be READY
*/
- if (megasas_transition_to_ready(instance->reg_set))
+ if (megasas_transition_to_ready(instance))
goto fail_ready_state;
/*
* Get various operational parameters from status register
*/
- instance->max_fw_cmds = readl(®_set->outbound_msg_0) & 0x00FFFF;
- instance->max_num_sge = (readl(®_set->outbound_msg_0) & 0xFF0000) >>
- 0x10;
+ instance->max_fw_cmds = instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF;
+ instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >>
+ 0x10;
/*
* Create a pool of commands
*/
@@ -1936,8 +1929,7 @@
/*
* Issue the aen registration frame
*/
- writel(cmd->frame_phys_addr >> 3,
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
return 0;
}
@@ -2126,7 +2118,7 @@
goto fail_irq;
}
- megasas_enable_intr(instance->reg_set);
+ instance->instancet->enable_intr(instance->reg_set);
/*
* Store instance in PCI softstate
@@ -2681,9 +2673,8 @@
unsigned long arg)
{
switch (cmd) {
- case MEGASAS_IOC_FIRMWARE:{
- return megasas_mgmt_compat_ioctl_fw(file, arg);
- }
+ case MEGASAS_IOC_FIRMWARE32:
+ return megasas_mgmt_compat_ioctl_fw(file, arg);
case MEGASAS_IOC_GET_AEN:
return megasas_mgmt_ioctl_aen(file, arg);
}
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index eaec9d5..d6d166c 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -18,10 +18,9 @@
/**
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "00.00.02.00-rc4"
-#define MEGASAS_RELDATE "Sep 16, 2005"
-#define MEGASAS_EXT_VERSION "Fri Sep 16 12:37:08 EDT 2005"
-
+#define MEGASAS_VERSION "00.00.02.02"
+#define MEGASAS_RELDATE "Jan 23, 2006"
+#define MEGASAS_EXT_VERSION "Mon Jan 23 14:09:01 PST 2006"
/*
* =====================================
* MegaRAID SAS MFI firmware definitions
@@ -1013,6 +1012,16 @@
} __attribute__ ((packed));
+ struct megasas_instance_template {
+ void (*fire_cmd)(dma_addr_t ,u32 ,struct megasas_register_set __iomem *);
+
+ void (*enable_intr)(struct megasas_register_set __iomem *) ;
+
+ int (*clear_intr)(struct megasas_register_set __iomem *);
+
+ u32 (*read_fw_status_reg)(struct megasas_register_set __iomem *);
+ };
+
struct megasas_instance {
u32 *producer;
@@ -1056,6 +1065,8 @@
u32 fw_outstanding;
u32 hw_crit_error;
spinlock_t instance_lock;
+
+ struct megasas_instance_template *instancet;
};
#define MEGASAS_IS_LOGICAL(scp) \
@@ -1125,11 +1136,10 @@
struct compat_iovec sgl[MAX_IOCTL_SGE];
} __attribute__ ((packed));
-#define MEGASAS_IOC_FIRMWARE _IOWR('M', 1, struct compat_megasas_iocpacket)
-#else
-#define MEGASAS_IOC_FIRMWARE _IOWR('M', 1, struct megasas_iocpacket)
#endif
+#define MEGASAS_IOC_FIRMWARE _IOWR('M', 1, struct megasas_iocpacket)
+#define MEGASAS_IOC_FIRMWARE32 _IOWR('M', 1, struct compat_megasas_iocpacket)
#define MEGASAS_IOC_GET_AEN _IOW('M', 3, struct megasas_aen)
struct megasas_mgmt_info {
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 0878f95..e023024 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -17,9 +17,11 @@
* General Public License for more details.
*
******************************************************************************/
-#define QLA1280_VERSION "3.25"
+#define QLA1280_VERSION "3.26"
/*****************************************************************************
Revision History:
+ Rev 3.26, January 16, 2006 Jes Sorensen
+ - Ditch all < 2.6 support
Rev 3.25.1, February 10, 2005 Christoph Hellwig
- use pci_map_single to map non-S/G requests
- remove qla1280_proc_info
@@ -356,25 +358,18 @@
#include <asm/types.h>
#include <asm/system.h>
-#if LINUX_VERSION_CODE >= 0x020545
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
-#else
-#include <linux/blk.h>
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "sd.h"
-#endif
#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
#include <asm/sn/io.h>
#endif
-#if LINUX_VERSION_CODE < 0x020407
-#error "Kernels older than 2.4.7 are no longer supported"
+#if LINUX_VERSION_CODE < 0x020600
+#error "Kernels older than 2.6.0 are no longer supported"
#endif
@@ -441,52 +436,6 @@
#define NVRAM_DELAY() udelay(500) /* 2 microseconds */
-#if LINUX_VERSION_CODE < 0x020500
-#define HOST_LOCK &io_request_lock
-#define irqreturn_t void
-#define IRQ_RETVAL(foo)
-#define MSG_ORDERED_TAG 1
-
-#define DMA_BIDIRECTIONAL SCSI_DATA_UNKNOWN
-#define DMA_TO_DEVICE SCSI_DATA_WRITE
-#define DMA_FROM_DEVICE SCSI_DATA_READ
-#define DMA_NONE SCSI_DATA_NONE
-
-#ifndef HAVE_SECTOR_T
-typedef unsigned int sector_t;
-#endif
-
-static inline void
-scsi_adjust_queue_depth(struct scsi_device *device, int tag, int depth)
-{
- if (tag) {
- device->tagged_queue = tag;
- device->current_tag = 0;
- }
- device->queue_depth = depth;
-}
-static inline struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *t, size_t s)
-{
- return scsi_register(t, s);
-}
-static inline void scsi_host_put(struct Scsi_Host *h)
-{
- scsi_unregister(h);
-}
-#else
-#define HOST_LOCK ha->host->host_lock
-#endif
-#if LINUX_VERSION_CODE < 0x020600
-#define DEV_SIMPLE_TAGS(device) device->tagged_queue
-/*
- * Hack around that qla1280_remove_one is called from
- * qla1280_release in 2.4
- */
-#undef __devexit
-#define __devexit
-#else
-#define DEV_SIMPLE_TAGS(device) device->simple_tags
-#endif
#if defined(__ia64__) && !defined(ia64_platform_is)
#define ia64_platform_is(foo) (!strcmp(x, platform_name))
#endif
@@ -506,9 +455,6 @@
* QLogic Driver Support Function Prototypes.
*/
static void qla1280_done(struct scsi_qla_host *);
-#if LINUX_VERSION_CODE < 0x020545
-static void qla1280_get_target_options(struct scsi_cmnd *, struct scsi_qla_host *);
-#endif
static int qla1280_get_token(char *);
static int qla1280_setup(char *s) __init;
@@ -610,11 +556,7 @@
#define CMD_SNSLEN(Cmnd) sizeof(Cmnd->sense_buffer)
#define CMD_RESULT(Cmnd) Cmnd->result
#define CMD_HANDLE(Cmnd) Cmnd->host_scribble
-#if LINUX_VERSION_CODE < 0x020545
-#define CMD_REQUEST(Cmnd) Cmnd->request.cmd
-#else
#define CMD_REQUEST(Cmnd) Cmnd->request->cmd
-#endif
#define CMD_HOST(Cmnd) Cmnd->device->host
#define SCSI_BUS_32(Cmnd) Cmnd->device->channel
@@ -1064,10 +1006,10 @@
add_timer(&timer);
/* wait for the action to complete (or the timer to expire) */
- spin_unlock_irq(HOST_LOCK);
+ spin_unlock_irq(ha->host->host_lock);
wait_for_completion(&wait);
del_timer_sync(&timer);
- spin_lock_irq(HOST_LOCK);
+ spin_lock_irq(ha->host->host_lock);
sp->wait = NULL;
/* the only action we might get a fail for is abort */
@@ -1173,96 +1115,6 @@
return 0;
}
-#if LINUX_VERSION_CODE < 0x020600
-static int
-qla1280_detect(struct scsi_host_template *template)
-{
- struct pci_device_id *id = &qla1280_pci_tbl[0];
- struct pci_dev *pdev = NULL;
- int num_hosts = 0;
-
- if (sizeof(struct srb) > sizeof(Scsi_Pointer)) {
- printk(KERN_WARNING
- "qla1280: struct srb too big, aborting\n");
- return 0;
- }
-
- if ((DMA_BIDIRECTIONAL != PCI_DMA_BIDIRECTIONAL) ||
- (DMA_TO_DEVICE != PCI_DMA_TODEVICE) ||
- (DMA_FROM_DEVICE != PCI_DMA_FROMDEVICE) ||
- (DMA_NONE != PCI_DMA_NONE)) {
- printk(KERN_WARNING
- "qla1280: dma direction bits don't match\n");
- return 0;
- }
-
-#ifdef MODULE
- /*
- * If we are called as a module, the qla1280 pointer may not be null
- * and it would point to our bootup string, just like on the lilo
- * command line. IF not NULL, then process this config string with
- * qla1280_setup
- *
- * Boot time Options
- * To add options at boot time add a line to your lilo.conf file like:
- * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}"
- * which will result in the first four devices on the first two
- * controllers being set to a tagged queue depth of 32.
- */
- if (qla1280)
- qla1280_setup(qla1280);
-#endif
-
- /* First Initialize QLA12160 on PCI Bus 1 Dev 2 */
- while ((pdev = pci_find_device(id->vendor, id->device, pdev))) {
- if (pdev->bus->number == 1 && PCI_SLOT(pdev->devfn) == 2) {
- if (!qla1280_probe_one(pdev, id))
- num_hosts++;
- }
- }
-
- pdev = NULL;
- /* Try and find each different type of adapter we support */
- for (id = &qla1280_pci_tbl[0]; id->device; id++) {
- while ((pdev = pci_find_device(id->vendor, id->device, pdev))) {
- /*
- * skip QLA12160 already initialized on
- * PCI Bus 1 Dev 2 since we already initialized
- * and presented it
- */
- if (id->device == PCI_DEVICE_ID_QLOGIC_ISP12160 &&
- pdev->bus->number == 1 &&
- PCI_SLOT(pdev->devfn) == 2)
- continue;
-
- if (!qla1280_probe_one(pdev, id))
- num_hosts++;
- }
- }
-
- return num_hosts;
-}
-
-/*
- * This looks a bit ugly as we could just pass down host to
- * qla1280_remove_one, but I want to keep qla1280_release purely a wrapper
- * around pci_driver::remove as used from 2.6 onwards.
- */
-static int
-qla1280_release(struct Scsi_Host *host)
-{
- struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
-
- qla1280_remove_one(ha->pdev);
- return 0;
-}
-
-static int
-qla1280_biosparam_old(Disk * disk, kdev_t dev, int geom[])
-{
- return qla1280_biosparam(disk->device, NULL, disk->capacity, geom);
-}
-#endif
/* disable risc and host interrupts */
static inline void
@@ -1295,7 +1147,7 @@
ENTER_INTR ("qla1280_intr_handler");
ha = (struct scsi_qla_host *)dev_id;
- spin_lock(HOST_LOCK);
+ spin_lock(ha->host->host_lock);
ha->isr_count++;
reg = ha->iobase;
@@ -1311,7 +1163,7 @@
if (!list_empty(&ha->done_q))
qla1280_done(ha);
- spin_unlock(HOST_LOCK);
+ spin_unlock(ha->host->host_lock);
qla1280_enable_intrs(ha);
@@ -1411,11 +1263,9 @@
scsi_adjust_queue_depth(device, 0, default_depth);
}
-#if LINUX_VERSION_CODE > 0x020500
nv->bus[bus].target[target].parameter.enable_sync = device->sdtr;
nv->bus[bus].target[target].parameter.enable_wide = device->wdtr;
nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr;
-#endif
if (driver_setup.no_sync ||
(driver_setup.sync_mask &&
@@ -1432,38 +1282,14 @@
nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
}
- spin_lock_irqsave(HOST_LOCK, flags);
+ spin_lock_irqsave(ha->host->host_lock, flags);
if (nv->bus[bus].target[target].parameter.enable_sync)
status = qla1280_set_target_parameters(ha, bus, target);
qla1280_get_target_parameters(ha, device);
- spin_unlock_irqrestore(HOST_LOCK, flags);
+ spin_unlock_irqrestore(ha->host->host_lock, flags);
return status;
}
-#if LINUX_VERSION_CODE < 0x020545
-/**************************************************************************
- * qla1280_select_queue_depth
- *
- * Sets the queue depth for each SCSI device hanging off the input
- * host adapter. We use a queue depth of 2 for devices that do not
- * support tagged queueing.
- **************************************************************************/
-static void
-qla1280_select_queue_depth(struct Scsi_Host *host, struct scsi_device *sdev_q)
-{
- struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
- struct scsi_device *sdev;
-
- ENTER("qla1280_select_queue_depth");
- for (sdev = sdev_q; sdev; sdev = sdev->next)
- if (sdev->host == host)
- qla1280_slave_configure(sdev);
-
- if (sdev_q)
- qla1280_check_for_dead_scsi_bus(ha, sdev_q->channel);
- LEAVE("qla1280_select_queue_depth");
-}
-#endif
/*
* qla1280_done
@@ -1523,10 +1349,6 @@
CMD_HANDLE(sp->cmd) = (unsigned char *)INVALID_HANDLE;
ha->actthreads--;
-#if LINUX_VERSION_CODE < 0x020500
- if (cmd->cmnd[0] == INQUIRY)
- qla1280_get_target_options(cmd, ha);
-#endif
(*(cmd)->scsi_done)(cmd);
if(sp->wait != NULL)
@@ -1655,9 +1477,7 @@
struct device_reg __iomem *reg;
int status;
int bus;
-#if LINUX_VERSION_CODE > 0x020500
unsigned long flags;
-#endif
ENTER("qla1280_initialize_adapter");
@@ -1695,15 +1515,12 @@
"NVRAM\n");
}
-#if LINUX_VERSION_CODE >= 0x020500
/*
* It's necessary to grab the spin here as qla1280_mailbox_command
* needs to be able to drop the lock unconditionally to wait
* for completion.
- * In 2.4 ->detect is called with the io_request_lock held.
*/
- spin_lock_irqsave(HOST_LOCK, flags);
-#endif
+ spin_lock_irqsave(ha->host->host_lock, flags);
status = qla1280_load_firmware(ha);
if (status) {
@@ -1735,9 +1552,8 @@
ha->flags.online = 1;
out:
-#if LINUX_VERSION_CODE >= 0x020500
- spin_unlock_irqrestore(HOST_LOCK, flags);
-#endif
+ spin_unlock_irqrestore(ha->host->host_lock, flags);
+
if (status)
dprintk(2, "qla1280_initialize_adapter: **** FAILED ****\n");
@@ -2650,14 +2466,14 @@
timer.function = qla1280_mailbox_timeout;
add_timer(&timer);
- spin_unlock_irq(HOST_LOCK);
+ spin_unlock_irq(ha->host->host_lock);
WRT_REG_WORD(®->host_cmd, HC_SET_HOST_INT);
data = qla1280_debounce_register(®->istatus);
wait_for_completion(&wait);
del_timer_sync(&timer);
- spin_lock_irq(HOST_LOCK);
+ spin_lock_irq(ha->host->host_lock);
ha->mailbox_wait = NULL;
@@ -2770,9 +2586,9 @@
ha->bus_settings[bus].scsi_bus_dead = 1;
ha->bus_settings[bus].failed_reset_count++;
} else {
- spin_unlock_irq(HOST_LOCK);
+ spin_unlock_irq(ha->host->host_lock);
ssleep(reset_delay);
- spin_lock_irq(HOST_LOCK);
+ spin_lock_irq(ha->host->host_lock);
ha->bus_settings[bus].scsi_bus_dead = 0;
ha->bus_settings[bus].failed_reset_count = 0;
@@ -3078,7 +2894,7 @@
(SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
/* Enable simple tag queuing if device supports it. */
- if (DEV_SIMPLE_TAGS(cmd->device))
+ if (cmd->device->simple_tags)
pkt->control_flags |= cpu_to_le16(BIT_3);
/* Load SCSI command packet. */
@@ -3377,7 +3193,7 @@
(SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
/* Enable simple tag queuing if device supports it. */
- if (DEV_SIMPLE_TAGS(cmd->device))
+ if (cmd->device->simple_tags)
pkt->control_flags |= cpu_to_le16(BIT_3);
/* Load SCSI command packet. */
@@ -3889,50 +3705,6 @@
}
-#if LINUX_VERSION_CODE < 0x020500
-/*
- *
- */
-static void
-qla1280_get_target_options(struct scsi_cmnd *cmd, struct scsi_qla_host *ha)
-{
- unsigned char *result;
- struct nvram *n;
- int bus, target, lun;
-
- bus = SCSI_BUS_32(cmd);
- target = SCSI_TCN_32(cmd);
- lun = SCSI_LUN_32(cmd);
-
- /*
- * Make sure to not touch anything if someone is using the
- * sg interface.
- */
- if (cmd->use_sg || (CMD_RESULT(cmd) >> 16) != DID_OK || lun)
- return;
-
- result = cmd->request_buffer;
- n = &ha->nvram;
-
- n->bus[bus].target[target].parameter.enable_wide = 0;
- n->bus[bus].target[target].parameter.enable_sync = 0;
- n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
-
- if (result[7] & 0x60)
- n->bus[bus].target[target].parameter.enable_wide = 1;
- if (result[7] & 0x10)
- n->bus[bus].target[target].parameter.enable_sync = 1;
- if ((result[2] >= 3) && (result[4] + 5 > 56) &&
- (result[56] & 0x4))
- n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1;
-
- dprintk(2, "get_target_options(): wide %i, sync %i, ppr %i\n",
- n->bus[bus].target[target].parameter.enable_wide,
- n->bus[bus].target[target].parameter.enable_sync,
- n->bus[bus].target[target].ppr_1x160.flags.enable_ppr);
-}
-#endif
-
/*
* qla1280_status_entry
* Processes received ISP status entry.
@@ -4271,7 +4043,7 @@
} else
printk(" Async");
- if (DEV_SIMPLE_TAGS(device))
+ if (device->simple_tags)
printk(", Tagged queuing: depth %d", device->queue_depth);
printk("\n");
}
@@ -4485,7 +4257,7 @@
return ret;
}
-#if LINUX_VERSION_CODE >= 0x020600
+
static struct scsi_host_template qla1280_driver_template = {
.module = THIS_MODULE,
.proc_name = "qla1280",
@@ -4504,27 +4276,7 @@
.cmd_per_lun = 1,
.use_clustering = ENABLE_CLUSTERING,
};
-#else
-static struct scsi_host_template qla1280_driver_template = {
- .proc_name = "qla1280",
- .name = "Qlogic ISP 1280/12160",
- .detect = qla1280_detect,
- .release = qla1280_release,
- .info = qla1280_info,
- .queuecommand = qla1280_queuecommand,
- .eh_abort_handler = qla1280_eh_abort,
- .eh_device_reset_handler= qla1280_eh_device_reset,
- .eh_bus_reset_handler = qla1280_eh_bus_reset,
- .eh_host_reset_handler = qla1280_eh_adapter_reset,
- .bios_param = qla1280_biosparam_old,
- .can_queue = 0xfffff,
- .this_id = -1,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING,
- .use_new_eh_code = 1,
-};
-#endif
+
static int __devinit
qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -4615,10 +4367,6 @@
host->max_sectors = 1024;
host->unique_id = host->host_no;
-#if LINUX_VERSION_CODE < 0x020545
- host->select_queue_depths = qla1280_select_queue_depth;
-#endif
-
error = -ENODEV;
#if MEMORY_MAPPED_IO
@@ -4666,21 +4414,15 @@
pci_set_drvdata(pdev, host);
-#if LINUX_VERSION_CODE >= 0x020600
error = scsi_add_host(host, &pdev->dev);
if (error)
goto error_disable_adapter;
scsi_scan_host(host);
-#else
- scsi_set_pci_device(host, pdev);
-#endif
return 0;
-#if LINUX_VERSION_CODE >= 0x020600
error_disable_adapter:
qla1280_disable_intrs(ha);
-#endif
error_free_irq:
free_irq(pdev->irq, ha);
error_release_region:
@@ -4712,9 +4454,7 @@
struct Scsi_Host *host = pci_get_drvdata(pdev);
struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
-#if LINUX_VERSION_CODE >= 0x020600
scsi_remove_host(host);
-#endif
qla1280_disable_intrs(ha);
@@ -4738,7 +4478,6 @@
scsi_host_put(host);
}
-#if LINUX_VERSION_CODE >= 0x020600
static struct pci_driver qla1280_pci_driver = {
.name = "qla1280",
.id_table = qla1280_pci_tbl,
@@ -4784,10 +4523,6 @@
module_init(qla1280_init);
module_exit(qla1280_exit);
-#else
-# define driver_template qla1280_driver_template
-# include "scsi_module.c"
-#endif
MODULE_AUTHOR("Qlogic & Jes Sorensen");
MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 79d8a91..bad066e 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1680,7 +1680,8 @@
uint8_t mp_byte; /* multi-path byte (not used) */
uint8_t cur_path; /* current path id */
- struct fc_rport *rport;
+ spinlock_t rport_lock;
+ struct fc_rport *rport, *drport;
u32 supported_classes;
struct work_struct rport_add_work;
struct work_struct rport_del_work;
@@ -2270,6 +2271,7 @@
#define LOOP_RESET_NEEDED 24
#define BEACON_BLINK_NEEDED 25
#define REGISTER_FDMI_NEEDED 26
+#define FCPORT_UPDATE_NEEDED 27
uint32_t device_flags;
#define DFLG_LOCAL_DEVICES BIT_0
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 32be4c1..35266bd 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -47,9 +47,11 @@
extern void qla2x00_restart_queues(scsi_qla_host_t *, uint8_t);
extern void qla2x00_rescan_fcports(scsi_qla_host_t *);
+extern void qla2x00_update_fcports(scsi_qla_host_t *);
extern int qla2x00_abort_isp(scsi_qla_host_t *);
+extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
extern void qla2x00_reg_remote_port(scsi_qla_host_t *, fc_port_t *);
/*
@@ -70,8 +72,8 @@
extern void qla2x00_cmd_timeout(srb_t *);
-extern void qla2x00_mark_device_lost(scsi_qla_host_t *, fc_port_t *, int);
-extern void qla2x00_mark_all_devices_lost(scsi_qla_host_t *);
+extern void qla2x00_mark_device_lost(scsi_qla_host_t *, fc_port_t *, int, int);
+extern void qla2x00_mark_all_devices_lost(scsi_qla_host_t *, int);
extern void qla2x00_blink_led(scsi_qla_host_t *);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index a91fea6..e67bb09 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -32,7 +32,6 @@
static int qla2x00_configure_hba(scsi_qla_host_t *);
static int qla2x00_configure_loop(scsi_qla_host_t *);
static int qla2x00_configure_local_loop(scsi_qla_host_t *);
-static void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
static int qla2x00_configure_fabric(scsi_qla_host_t *);
static int qla2x00_find_all_fabric_devs(scsi_qla_host_t *, struct list_head *);
static int qla2x00_device_resync(scsi_qla_host_t *);
@@ -1688,10 +1687,16 @@
qla2x00_rport_del(void *data)
{
fc_port_t *fcport = data;
+ struct fc_rport *rport;
+ unsigned long flags;
- if (fcport->rport)
- fc_remote_port_delete(fcport->rport);
- fcport->rport = NULL;
+ spin_lock_irqsave(&fcport->rport_lock, flags);
+ rport = fcport->drport;
+ fcport->drport = NULL;
+ spin_unlock_irqrestore(&fcport->rport_lock, flags);
+ if (rport)
+ fc_remote_port_delete(rport);
+
}
/**
@@ -1719,6 +1724,7 @@
atomic_set(&fcport->state, FCS_UNCONFIGURED);
fcport->flags = FCF_RLC_SUPPORT;
fcport->supported_classes = FC_COS_UNSPECIFIED;
+ spin_lock_init(&fcport->rport_lock);
INIT_WORK(&fcport->rport_add_work, qla2x00_rport_add, fcport);
INIT_WORK(&fcport->rport_del_work, qla2x00_rport_del, fcport);
@@ -2008,7 +2014,7 @@
{
fc_port_t *fcport;
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 0);
list_for_each_entry(fcport, &ha->fcports, list) {
if (fcport->port_type != FCT_TARGET)
continue;
@@ -2032,13 +2038,9 @@
* Context:
* Kernel context.
*/
-static void
+void
qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
{
- uint16_t index;
- unsigned long flags;
- srb_t *sp;
-
fcport->ha = ha;
fcport->login_retry = 0;
fcport->port_login_retry_count = ha->port_down_retry_count *
@@ -2047,28 +2049,6 @@
PORT_RETRY_TIME);
fcport->flags &= ~FCF_LOGIN_NEEDED;
- /*
- * Check for outstanding cmd on tape Bypass LUN discovery if active
- * command on tape.
- */
- if (fcport->flags & FCF_TAPE_PRESENT) {
- spin_lock_irqsave(&ha->hardware_lock, flags);
- for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
- fc_port_t *sfcp;
-
- if ((sp = ha->outstanding_cmds[index]) != 0) {
- sfcp = sp->fcport;
- if (sfcp == fcport) {
- atomic_set(&fcport->state, FCS_ONLINE);
- spin_unlock_irqrestore(
- &ha->hardware_lock, flags);
- return;
- }
- }
- }
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
- }
-
if (fcport->port_type == FCT_INITIATOR ||
fcport->port_type == FCT_BROADCAST)
fcport->device_type = TYPE_PROCESSOR;
@@ -2084,24 +2064,29 @@
{
struct fc_rport_identifiers rport_ids;
struct fc_rport *rport;
+ unsigned long flags;
- if (fcport->rport) {
- fc_remote_port_delete(fcport->rport);
- fcport->rport = NULL;
- }
+ if (fcport->drport)
+ qla2x00_rport_del(fcport);
+ if (fcport->rport)
+ return;
rport_ids.node_name = wwn_to_u64(fcport->node_name);
rport_ids.port_name = wwn_to_u64(fcport->port_name);
rport_ids.port_id = fcport->d_id.b.domain << 16 |
fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa;
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
- fcport->rport = rport = fc_remote_port_add(ha->host, 0, &rport_ids);
+ rport = fc_remote_port_add(ha->host, 0, &rport_ids);
if (!rport) {
qla_printk(KERN_WARNING, ha,
"Unable to allocate fc remote port!\n");
return;
}
+ spin_lock_irqsave(&fcport->rport_lock, flags);
+ fcport->rport = rport;
*((fc_port_t **)rport->dd_data) = fcport;
+ spin_unlock_irqrestore(&fcport->rport_lock, flags);
+
rport->supported_classes = fcport->supported_classes;
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
@@ -2217,12 +2202,11 @@
if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
qla2x00_mark_device_lost(ha, fcport,
- ql2xplogiabsentdevice);
+ ql2xplogiabsentdevice, 0);
if (fcport->loop_id != FC_NO_LOOP_ID &&
(fcport->flags & FCF_TAPE_PRESENT) == 0 &&
fcport->port_type != FCT_INITIATOR &&
fcport->port_type != FCT_BROADCAST) {
-
ha->isp_ops.fabric_logout(ha,
fcport->loop_id,
fcport->d_id.b.domain,
@@ -2694,7 +2678,8 @@
if (atomic_read(&fcport->state) == FCS_ONLINE) {
if (format != 3 ||
fcport->port_type != FCT_INITIATOR) {
- qla2x00_mark_device_lost(ha, fcport, 0);
+ qla2x00_mark_device_lost(ha, fcport,
+ 0, 0);
}
}
fcport->flags &= ~FCF_FARP_DONE;
@@ -2741,8 +2726,7 @@
ha->isp_ops.fabric_logout(ha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
- qla2x00_mark_device_lost(ha, fcport, 1);
-
+ qla2x00_mark_device_lost(ha, fcport, 1, 0);
} else {
qla2x00_update_fcport(ha, fcport);
}
@@ -2855,7 +2839,7 @@
ha->isp_ops.fabric_logout(ha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
- qla2x00_mark_device_lost(ha, fcport, 1);
+ qla2x00_mark_device_lost(ha, fcport, 1, 0);
rval = 1;
break;
@@ -2990,6 +2974,17 @@
qla2x00_probe_for_all_luns(ha);
}
+void
+qla2x00_update_fcports(scsi_qla_host_t *ha)
+{
+ fc_port_t *fcport;
+
+ /* Go with deferred removal of rport references. */
+ list_for_each_entry(fcport, &ha->fcports, list)
+ if (fcport->drport)
+ qla2x00_rport_del(fcport);
+}
+
/*
* qla2x00_abort_isp
* Resets ISP and aborts all outstanding commands.
@@ -3019,7 +3014,7 @@
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 0);
} else {
if (!atomic_read(&ha->loop_down_timer))
atomic_set(&ha->loop_down_timer,
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index f63af08..71a46fc 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -389,7 +389,7 @@
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 1);
}
set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
@@ -432,7 +432,7 @@
atomic_set(&ha->loop_state, LOOP_DOWN);
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
ha->device_flags |= DFLG_NO_CABLE;
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 1);
}
ha->flags.management_server_logged_in = 0;
@@ -453,7 +453,7 @@
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 1);
}
set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
@@ -482,7 +482,7 @@
if (!atomic_read(&ha->loop_down_timer))
atomic_set(&ha->loop_down_timer,
LOOP_DOWN_TIME);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 1);
}
if (!(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) {
@@ -506,7 +506,7 @@
if (!atomic_read(&ha->loop_down_timer))
atomic_set(&ha->loop_down_timer,
LOOP_DOWN_TIME);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 1);
}
set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
@@ -580,7 +580,7 @@
*/
atomic_set(&ha->loop_state, LOOP_UP);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 1);
ha->flags.rscn_queue_overflow = 1;
@@ -1091,7 +1091,7 @@
cp->result = DID_BUS_BUSY << 16;
if (atomic_read(&fcport->state) == FCS_ONLINE) {
- qla2x00_mark_device_lost(ha, fcport, 1);
+ qla2x00_mark_device_lost(ha, fcport, 1, 1);
}
break;
@@ -1135,7 +1135,7 @@
/* Check to see if logout occurred. */
if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT))
- qla2x00_mark_device_lost(ha, fcport, 1);
+ qla2x00_mark_device_lost(ha, fcport, 1, 1);
break;
case CS_QUEUE_FULL:
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 4916847..5866a7c 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -756,7 +756,7 @@
if (ret == SUCCESS) {
if (fcport->flags & FC_FABRIC_DEVICE) {
ha->isp_ops.fabric_logout(ha, fcport->loop_id);
- qla2x00_mark_device_lost(ha, fcport);
+ qla2x00_mark_device_lost(ha, fcport, 0, 0);
}
}
#endif
@@ -1642,6 +1642,31 @@
pci_disable_device(ha->pdev);
}
+static inline void
+qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport,
+ int defer)
+{
+ unsigned long flags;
+ struct fc_rport *rport;
+
+ if (!fcport->rport)
+ return;
+
+ rport = fcport->rport;
+ if (defer) {
+ spin_lock_irqsave(&fcport->rport_lock, flags);
+ fcport->drport = rport;
+ fcport->rport = NULL;
+ spin_unlock_irqrestore(&fcport->rport_lock, flags);
+ set_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
+ } else {
+ spin_lock_irqsave(&fcport->rport_lock, flags);
+ fcport->rport = NULL;
+ spin_unlock_irqrestore(&fcport->rport_lock, flags);
+ fc_remote_port_delete(rport);
+ }
+}
+
/*
* qla2x00_mark_device_lost Updates fcport state when device goes offline.
*
@@ -1652,10 +1677,10 @@
* Context:
*/
void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport,
- int do_login)
+ int do_login, int defer)
{
- if (atomic_read(&fcport->state) == FCS_ONLINE && fcport->rport)
- schedule_work(&fcport->rport_del_work);
+ if (atomic_read(&fcport->state) == FCS_ONLINE)
+ qla2x00_schedule_rport_del(ha, fcport, defer);
/*
* We may need to retry the login, so don't change the state of the
@@ -1702,7 +1727,7 @@
* Context:
*/
void
-qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha)
+qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer)
{
fc_port_t *fcport;
@@ -1716,10 +1741,13 @@
*/
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
continue;
- if (atomic_read(&fcport->state) == FCS_ONLINE && fcport->rport)
- schedule_work(&fcport->rport_del_work);
+ if (atomic_read(&fcport->state) == FCS_ONLINE)
+ qla2x00_schedule_rport_del(ha, fcport, defer);
atomic_set(&fcport->state, FCS_DEVICE_LOST);
}
+
+ if (defer && ha->dpc_wait && !ha->dpc_active)
+ up(ha->dpc_wait);
}
/*
@@ -2161,6 +2189,9 @@
ha->host_no));
}
+ if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags))
+ qla2x00_update_fcports(ha);
+
if (test_and_clear_bit(LOOP_RESET_NEEDED, &ha->dpc_flags)) {
DEBUG(printk("scsi(%ld): dpc: sched loop_reset()\n",
ha->host_no));
@@ -2219,13 +2250,8 @@
DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n",
ha->host_no, fcport->loop_id));
- fcport->port_login_retry_count =
- ha->port_down_retry_count * PORT_RETRY_TIME;
- atomic_set(&fcport->state, FCS_ONLINE);
- atomic_set(&fcport->port_down_timer,
- ha->port_down_retry_count * PORT_RETRY_TIME);
-
- fcport->login_retry = 0;
+ qla2x00_update_fcport(ha,
+ fcport);
} else if (status == 1) {
set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
/* retry the login again */
@@ -2469,6 +2495,7 @@
if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) ||
test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) ||
test_bit(LOOP_RESET_NEEDED, &ha->dpc_flags) ||
+ test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags) ||
start_dpc ||
test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) ||
test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 0042c78..5b36a23 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -37,7 +37,7 @@
#include <asm/io.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "0.5"
+#define DRV_VERSION "0.6"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -228,7 +228,9 @@
MV_HP_ERRATA_50XXB2 = (1 << 2),
MV_HP_ERRATA_60X1B2 = (1 << 3),
MV_HP_ERRATA_60X1C0 = (1 << 4),
- MV_HP_50XX = (1 << 5),
+ MV_HP_ERRATA_XX42A0 = (1 << 5),
+ MV_HP_50XX = (1 << 6),
+ MV_HP_GEN_IIE = (1 << 7),
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0),
@@ -237,6 +239,9 @@
#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX)
#define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0)
+#define IS_GEN_I(hpriv) IS_50XX(hpriv)
+#define IS_GEN_II(hpriv) IS_60XX(hpriv)
+#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
enum {
/* Our DMA boundary is determined by an ePRD being unable to handle
@@ -255,6 +260,8 @@
chip_5080,
chip_604x,
chip_608x,
+ chip_6042,
+ chip_7042,
};
/* Command ReQuest Block: 32B */
@@ -265,6 +272,14 @@
u16 ata_cmd[11];
};
+struct mv_crqb_iie {
+ u32 addr;
+ u32 addr_hi;
+ u32 flags;
+ u32 len;
+ u32 ata_cmd[4];
+};
+
/* Command ResPonse Block: 8B */
struct mv_crpb {
u16 id;
@@ -328,6 +343,7 @@
static int mv_port_start(struct ata_port *ap);
static void mv_port_stop(struct ata_port *ap);
static void mv_qc_prep(struct ata_queued_cmd *qc);
+static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
static irqreturn_t mv_interrupt(int irq, void *dev_instance,
struct pt_regs *regs);
@@ -430,6 +446,33 @@
.host_stop = mv_host_stop,
};
+static const struct ata_port_operations mv_iie_ops = {
+ .port_disable = ata_port_disable,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .phy_reset = mv_phy_reset,
+
+ .qc_prep = mv_qc_prep_iie,
+ .qc_issue = mv_qc_issue,
+
+ .eng_timeout = mv_eng_timeout,
+
+ .irq_handler = mv_interrupt,
+ .irq_clear = mv_irq_clear,
+
+ .scr_read = mv_scr_read,
+ .scr_write = mv_scr_write,
+
+ .port_start = mv_port_start,
+ .port_stop = mv_port_stop,
+ .host_stop = mv_host_stop,
+};
+
static const struct ata_port_info mv_port_info[] = {
{ /* chip_504x */
.sht = &mv_sht,
@@ -467,6 +510,21 @@
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &mv6_ops,
},
+ { /* chip_6042 */
+ .sht = &mv_sht,
+ .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &mv_iie_ops,
+ },
+ { /* chip_7042 */
+ .sht = &mv_sht,
+ .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ MV_FLAG_DUAL_HC),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &mv_iie_ops,
+ },
};
static const struct pci_device_id mv_pci_tbl[] = {
@@ -477,6 +535,7 @@
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x},
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x},
+ {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6042), 0, 0, chip_6042},
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x},
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x},
@@ -510,6 +569,12 @@
};
/*
+ * module options
+ */
+static int msi; /* Use PCI msi; either zero (off, default) or non-zero */
+
+
+/*
* Functions
*/
@@ -767,6 +832,33 @@
dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma);
}
+static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio)
+{
+ u32 cfg = readl(port_mmio + EDMA_CFG_OFS);
+
+ /* set up non-NCQ EDMA configuration */
+ cfg &= ~0x1f; /* clear queue depth */
+ cfg &= ~EDMA_CFG_NCQ; /* clear NCQ mode */
+ cfg &= ~(1 << 9); /* disable equeue */
+
+ if (IS_GEN_I(hpriv))
+ cfg |= (1 << 8); /* enab config burst size mask */
+
+ else if (IS_GEN_II(hpriv))
+ cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
+
+ else if (IS_GEN_IIE(hpriv)) {
+ cfg |= (1 << 23); /* dis RX PM port mask */
+ cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */
+ cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */
+ cfg |= (1 << 18); /* enab early completion */
+ cfg |= (1 << 17); /* enab host q cache */
+ cfg |= (1 << 22); /* enab cutthrough */
+ }
+
+ writelfl(cfg, port_mmio + EDMA_CFG_OFS);
+}
+
/**
* mv_port_start - Port specific init/start routine.
* @ap: ATA channel to manipulate
@@ -780,6 +872,7 @@
static int mv_port_start(struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
+ struct mv_host_priv *hpriv = ap->host_set->private_data;
struct mv_port_priv *pp;
void __iomem *port_mmio = mv_ap_base(ap);
void *mem;
@@ -823,17 +916,26 @@
pp->sg_tbl = mem;
pp->sg_tbl_dma = mem_dma;
- writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT |
- EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS);
+ mv_edma_cfg(hpriv, port_mmio);
writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK,
port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
- writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
- writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+ if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
+ writelfl(pp->crqb_dma & 0xffffffff,
+ port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+ else
+ writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
+
+ if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
+ writelfl(pp->crpb_dma & 0xffffffff,
+ port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+ else
+ writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+
writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
@@ -954,9 +1056,8 @@
struct ata_taskfile *tf;
u16 flags = 0;
- if (ATA_PROT_DMA != qc->tf.protocol) {
+ if (ATA_PROT_DMA != qc->tf.protocol)
return;
- }
/* the req producer index should be the same as we remember it */
assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
@@ -965,9 +1066,8 @@
/* Fill in command request block
*/
- if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE))
flags |= CRQB_FLAG_READ;
- }
assert(MV_MAX_Q_DEPTH > qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
@@ -1022,9 +1122,76 @@
mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0);
mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */
- if (!(qc->flags & ATA_QCFLAG_DMAMAP)) {
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
return;
- }
+ mv_fill_sg(qc);
+}
+
+/**
+ * mv_qc_prep_iie - Host specific command preparation.
+ * @qc: queued command to prepare
+ *
+ * This routine simply redirects to the general purpose routine
+ * if command is not DMA. Else, it handles prep of the CRQB
+ * (command request block), does some sanity checking, and calls
+ * the SG load routine.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct mv_port_priv *pp = ap->private_data;
+ struct mv_crqb_iie *crqb;
+ struct ata_taskfile *tf;
+ u32 flags = 0;
+
+ if (ATA_PROT_DMA != qc->tf.protocol)
+ return;
+
+ /* the req producer index should be the same as we remember it */
+ assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
+ EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ pp->req_producer);
+
+ /* Fill in Gen IIE command request block
+ */
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+ flags |= CRQB_FLAG_READ;
+
+ assert(MV_MAX_Q_DEPTH > qc->tag);
+ flags |= qc->tag << CRQB_TAG_SHIFT;
+
+ crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer];
+ crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
+ crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+ crqb->flags = cpu_to_le32(flags);
+
+ tf = &qc->tf;
+ crqb->ata_cmd[0] = cpu_to_le32(
+ (tf->command << 16) |
+ (tf->feature << 24)
+ );
+ crqb->ata_cmd[1] = cpu_to_le32(
+ (tf->lbal << 0) |
+ (tf->lbam << 8) |
+ (tf->lbah << 16) |
+ (tf->device << 24)
+ );
+ crqb->ata_cmd[2] = cpu_to_le32(
+ (tf->hob_lbal << 0) |
+ (tf->hob_lbam << 8) |
+ (tf->hob_lbah << 16) |
+ (tf->hob_feature << 24)
+ );
+ crqb->ata_cmd[3] = cpu_to_le32(
+ (tf->nsect << 0) |
+ (tf->hob_nsect << 8)
+ );
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
mv_fill_sg(qc);
}
@@ -1673,6 +1840,12 @@
m2 |= hpriv->signal[port].pre;
m2 &= ~(1 << 16);
+ /* according to mvSata 3.6.1, some IIE values are fixed */
+ if (IS_GEN_IIE(hpriv)) {
+ m2 &= ~0xC30FF01F;
+ m2 |= 0x0000900F;
+ }
+
writel(m2, port_mmio + PHY_MODE2);
}
@@ -1977,6 +2150,27 @@
}
break;
+ case chip_7042:
+ case chip_6042:
+ hpriv->ops = &mv6xxx_ops;
+
+ hp_flags |= MV_HP_GEN_IIE;
+
+ switch (rev_id) {
+ case 0x0:
+ hp_flags |= MV_HP_ERRATA_XX42A0;
+ break;
+ case 0x1:
+ hp_flags |= MV_HP_ERRATA_60X1C0;
+ break;
+ default:
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "Applying 60X1C0 workarounds to unknown rev\n");
+ hp_flags |= MV_HP_ERRATA_60X1C0;
+ break;
+ }
+ break;
+
default:
printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx);
return 1;
@@ -2180,7 +2374,7 @@
}
/* Enable interrupts */
- if (pci_enable_msi(pdev) == 0) {
+ if (msi && pci_enable_msi(pdev) == 0) {
hpriv->hp_flags |= MV_HP_FLAG_MSI;
} else {
pci_intx(pdev, 1);
@@ -2235,5 +2429,8 @@
MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+module_param(msi, int, 0444);
+MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
+
module_init(mv_init);
module_exit(mv_exit);
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 760c56f..dcd1667 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -46,7 +46,7 @@
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "1.03"
+#define DRV_VERSION "1.04"
enum {
@@ -58,6 +58,7 @@
PDC_GLOBAL_CTL = 0x48, /* Global control/status (per port) */
PDC_CTLSTAT = 0x60, /* IDE control and status (per port) */
PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */
+ PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */
PDC_SLEW_CTL = 0x470, /* slew rate control reg */
PDC_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) |
@@ -67,8 +68,10 @@
board_20319 = 1, /* FastTrak S150 TX4 */
board_20619 = 2, /* FastTrak TX4000 */
board_20771 = 3, /* FastTrak TX2300 */
+ board_2057x = 4, /* SATAII150 Tx2plus */
+ board_40518 = 5, /* SATAII150 Tx4 */
- PDC_HAS_PATA = (1 << 1), /* PDC20375 has PATA */
+ PDC_HAS_PATA = (1 << 1), /* PDC20375/20575 has PATA */
PDC_RESET = (1 << 11), /* HDMA reset */
@@ -83,6 +86,10 @@
dma_addr_t pkt_dma;
};
+struct pdc_host_priv {
+ int hotplug_offset;
+};
+
static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
@@ -97,6 +104,7 @@
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
static void pdc_irq_clear(struct ata_port *ap);
static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
+static void pdc_host_stop(struct ata_host_set *host_set);
static struct scsi_host_template pdc_ata_sht = {
@@ -138,7 +146,7 @@
.scr_write = pdc_sata_scr_write,
.port_start = pdc_port_start,
.port_stop = pdc_port_stop,
- .host_stop = ata_pci_host_stop,
+ .host_stop = pdc_host_stop,
};
static const struct ata_port_operations pdc_pata_ops = {
@@ -159,7 +167,7 @@
.port_start = pdc_port_start,
.port_stop = pdc_port_stop,
- .host_stop = ata_pci_host_stop,
+ .host_stop = pdc_host_stop,
};
static const struct ata_port_info pdc_port_info[] = {
@@ -202,6 +210,26 @@
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &pdc_sata_ops,
},
+
+ /* board_2057x */
+ {
+ .sht = &pdc_ata_sht,
+ .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .port_ops = &pdc_sata_ops,
+ },
+
+ /* board_40518 */
+ {
+ .sht = &pdc_ata_sht,
+ .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .port_ops = &pdc_sata_ops,
+ },
};
static const struct pci_device_id pdc_ata_pci_tbl[] = {
@@ -218,9 +246,9 @@
{ PCI_VENDOR_ID_PROMISE, 0x3376, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3574, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- board_2037x },
+ board_2057x },
{ PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- board_2037x },
+ board_2057x },
{ PCI_VENDOR_ID_PROMISE, 0x3d73, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
@@ -233,7 +261,7 @@
{ PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },
{ PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- board_20319 },
+ board_40518 },
{ PCI_VENDOR_ID_PROMISE, 0x6629, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20619 },
@@ -262,12 +290,11 @@
if (rc)
return rc;
- pp = kmalloc(sizeof(*pp), GFP_KERNEL);
+ pp = kzalloc(sizeof(*pp), GFP_KERNEL);
if (!pp) {
rc = -ENOMEM;
goto err_out;
}
- memset(pp, 0, sizeof(*pp));
pp->pkt = dma_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL);
if (!pp->pkt) {
@@ -299,6 +326,16 @@
}
+static void pdc_host_stop(struct ata_host_set *host_set)
+{
+ struct pdc_host_priv *hp = host_set->private_data;
+
+ ata_pci_host_stop(host_set);
+
+ kfree(hp);
+}
+
+
static void pdc_reset_port(struct ata_port *ap)
{
void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT;
@@ -488,14 +525,15 @@
VPRINTK("QUICK EXIT 2\n");
return IRQ_NONE;
}
+
+ spin_lock(&host_set->lock);
+
mask &= 0xffff; /* only 16 tags possible */
if (!mask) {
VPRINTK("QUICK EXIT 3\n");
- return IRQ_NONE;
+ goto done_irq;
}
- spin_lock(&host_set->lock);
-
writel(mask, mmio_base + PDC_INT_SEQMASK);
for (i = 0; i < host_set->n_ports; i++) {
@@ -512,10 +550,10 @@
}
}
- spin_unlock(&host_set->lock);
-
VPRINTK("EXIT\n");
+done_irq:
+ spin_unlock(&host_set->lock);
return IRQ_RETVAL(handled);
}
@@ -593,6 +631,8 @@
static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
{
void __iomem *mmio = pe->mmio_base;
+ struct pdc_host_priv *hp = pe->private_data;
+ int hotplug_offset = hp->hotplug_offset;
u32 tmp;
/*
@@ -607,12 +647,12 @@
writel(tmp, mmio + PDC_FLASH_CTL);
/* clear plug/unplug flags for all ports */
- tmp = readl(mmio + PDC_SATA_PLUG_CSR);
- writel(tmp | 0xff, mmio + PDC_SATA_PLUG_CSR);
+ tmp = readl(mmio + hotplug_offset);
+ writel(tmp | 0xff, mmio + hotplug_offset);
/* mask plug/unplug ints */
- tmp = readl(mmio + PDC_SATA_PLUG_CSR);
- writel(tmp | 0xff0000, mmio + PDC_SATA_PLUG_CSR);
+ tmp = readl(mmio + hotplug_offset);
+ writel(tmp | 0xff0000, mmio + hotplug_offset);
/* reduce TBG clock to 133 Mhz. */
tmp = readl(mmio + PDC_TBG_MODE);
@@ -634,6 +674,7 @@
{
static int printed_version;
struct ata_probe_ent *probe_ent = NULL;
+ struct pdc_host_priv *hp;
unsigned long base;
void __iomem *mmio_base;
unsigned int board_idx = (unsigned int) ent->driver_data;
@@ -664,13 +705,12 @@
if (rc)
goto err_out_regions;
- probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
if (probe_ent == NULL) {
rc = -ENOMEM;
goto err_out_regions;
}
- memset(probe_ent, 0, sizeof(*probe_ent));
probe_ent->dev = pci_dev_to_dev(pdev);
INIT_LIST_HEAD(&probe_ent->node);
@@ -681,6 +721,16 @@
}
base = (unsigned long) mmio_base;
+ hp = kzalloc(sizeof(*hp), GFP_KERNEL);
+ if (hp == NULL) {
+ rc = -ENOMEM;
+ goto err_out_free_ent;
+ }
+
+ /* Set default hotplug offset */
+ hp->hotplug_offset = PDC_SATA_PLUG_CSR;
+ probe_ent->private_data = hp;
+
probe_ent->sht = pdc_port_info[board_idx].sht;
probe_ent->host_flags = pdc_port_info[board_idx].host_flags;
probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask;
@@ -700,6 +750,10 @@
/* notice 4-port boards */
switch (board_idx) {
+ case board_40518:
+ /* Override hotplug offset for SATAII150 */
+ hp->hotplug_offset = PDC2_SATA_PLUG_CSR;
+ /* Fall through */
case board_20319:
probe_ent->n_ports = 4;
@@ -709,6 +763,10 @@
probe_ent->port[2].scr_addr = base + 0x600;
probe_ent->port[3].scr_addr = base + 0x700;
break;
+ case board_2057x:
+ /* Override hotplug offset for SATAII150 */
+ hp->hotplug_offset = PDC2_SATA_PLUG_CSR;
+ /* Fall through */
case board_2037x:
probe_ent->n_ports = 2;
break;
@@ -734,8 +792,10 @@
/* initialize adapter */
pdc_host_init(board_idx, probe_ent);
- /* FIXME: check ata_device_add return value */
- ata_device_add(probe_ent);
+ /* FIXME: Need any other frees than hp? */
+ if (!ata_device_add(probe_ent))
+ kfree(hp);
+
kfree(probe_ent);
return 0;
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 245ca99..c551bb8 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -1245,7 +1245,7 @@
if (error)
goto cleanup_sysctl;
- for (i = 0; i < NR_CPUS; i++)
+ for_each_cpu(i)
INIT_LIST_HEAD(&per_cpu(scsi_done_q, i));
devfs_mk_dir("scsi");
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 6bac3d2..50f8057 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -1350,7 +1350,7 @@
cmnd[4] = SCSI_REMOVAL_PREVENT;
cmnd[5] = 0;
- scsi_execute_async(sdev, cmnd, DMA_NONE, NULL, 0, 0, 10 * HZ,
+ scsi_execute_async(sdev, cmnd, 6, DMA_NONE, NULL, 0, 0, 10 * HZ,
5, NULL, NULL, GFP_KERNEL);
}
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 3574ba9..4a60285 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -436,6 +436,7 @@
* scsi_execute_async - insert request
* @sdev: scsi device
* @cmd: scsi command
+ * @cmd_len: length of scsi cdb
* @data_direction: data direction
* @buffer: data buffer (this can be a kernel buffer or scatterlist)
* @bufflen: len of buffer
@@ -445,7 +446,7 @@
* @flags: or into request flags
**/
int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd,
- int data_direction, void *buffer, unsigned bufflen,
+ int cmd_len, int data_direction, void *buffer, unsigned bufflen,
int use_sg, int timeout, int retries, void *privdata,
void (*done)(void *, char *, int, int), gfp_t gfp)
{
@@ -472,7 +473,7 @@
if (err)
goto free_req;
- req->cmd_len = COMMAND_SIZE(cmd[0]);
+ req->cmd_len = cmd_len;
memcpy(req->cmd, cmd, req->cmd_len);
req->sense = sioc->sense;
req->sense_len = 0;
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 59a1c9d..723f7ac 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -463,7 +463,7 @@
}
static void*
-mempool_zone_alloc_skb(unsigned int gfp_mask, void *pool_data)
+mempool_zone_alloc_skb(gfp_t gfp_mask, void *pool_data)
{
struct mempool_zone *zone = pool_data;
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index a3e0b7b..210dab5 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -377,7 +377,7 @@
/**
* sas_phy_alloc -- allocates and initialize a SAS PHY structure
* @parent: Parent device
- * @number: Port number
+ * @number: Phy index
*
* Allocates an SAS PHY structure. It will be added in the device tree
* below the device specified by @parent, which has to be either a Scsi_Host
@@ -595,8 +595,8 @@
device_initialize(&rphy->dev);
rphy->dev.parent = get_device(&parent->dev);
rphy->dev.release = sas_rphy_release;
- sprintf(rphy->dev.bus_id, "rphy-%d:%d",
- shost->host_no, parent->number);
+ sprintf(rphy->dev.bus_id, "rphy-%d:%d-%d",
+ shost->host_no, parent->port_identifier, parent->number);
transport_setup_device(&rphy->dev);
return rphy;
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 78aad95..2a54753 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -741,7 +741,7 @@
hp->duration = jiffies_to_msecs(jiffies);
/* Now send everything of to mid-level. The next time we hear about this
packet is when sg_cmd_done() is called (i.e. a callback). */
- if (scsi_execute_async(sdp->device, cmnd, data_dir, srp->data.buffer,
+ if (scsi_execute_async(sdp->device, cmnd, hp->cmd_len, data_dir, srp->data.buffer,
hp->dxfer_len, srp->data.k_use_sg, timeout,
SG_DEFAULT_RETRIES, srp, sg_cmd_done,
GFP_ATOMIC)) {
@@ -1679,7 +1679,7 @@
sg_build_sgat(Sg_scatter_hold * schp, const Sg_fd * sfp, int tablesize)
{
int sg_bufflen = tablesize * sizeof(struct scatterlist);
- unsigned int gfp_flags = GFP_ATOMIC | __GFP_NOWARN;
+ gfp_t gfp_flags = GFP_ATOMIC | __GFP_NOWARN;
/*
* TODO: test without low_dma, we should not need it since
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 13b1d3a..7f96f33 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -508,7 +508,7 @@
STp->buffer->cmdstat.have_sense = 0;
STp->buffer->syscall_result = 0;
- if (scsi_execute_async(STp->device, cmd, direction,
+ if (scsi_execute_async(STp->device, cmd, COMMAND_SIZE(cmd[0]), direction,
&((STp->buffer)->sg[0]), bytes, (STp->buffer)->sg_segs,
timeout, retries, SRpnt, st_sleep_done, GFP_KERNEL)) {
/* could not allocate the buffer or request was too large */
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 221999b..8c5c276 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -362,11 +362,11 @@
static struct uart_port serial21285_port = {
.mapbase = 0x42000160,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = NO_IRQ,
.fifosize = 16,
.ops = &serial21285_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
};
static void serial21285_setup_ports(void)
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index 8cbf0fc..7f0f35a 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -332,7 +332,7 @@
* Make sure that we do not overflow the buffer
*/
if (tty_request_buffer_room(tty, 1) == 0) {
- schedule_work(&tty->flip.work);
+ tty_schedule_flip(tty);
return;
}
@@ -353,7 +353,7 @@
} while((rx = uart->urx.w) & URX_DATA_READY);
#endif
- schedule_work(&tty->flip.work);
+ tty_schedule_flip(tty);
clear_and_exit:
return;
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 60f5a5d..9843ae3 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -509,7 +509,7 @@
info->rx_cur = (QUICC_BD *)bdp;
- schedule_work(&tty->flip.work);
+ tty_schedule_flip(tty);
}
static _INLINE_ void receive_break(ser_info_t *info)
@@ -521,7 +521,7 @@
* the break. If not, we exit now, losing the break. FIXME
*/
tty_insert_flip_char(tty, 0, TTY_BREAK);
- schedule_work(&tty->flip.work);
+ tty_schedule_flip(tty);
}
static _INLINE_ void transmit_chars(ser_info_t *info)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index bc36edf..b1fc97d 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -31,7 +31,6 @@
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
-#include <linux/mca.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
@@ -2027,12 +2026,6 @@
int ret;
/*
- * Don't probe for MCA ports on non-MCA machines.
- */
- if (up->port.flags & UPF_BOOT_ONLYMCA && !MCA_bus)
- return;
-
- /*
* Find the region that we can probe for. This in turn
* tells us whether we can probe for the type of port.
*/
@@ -2164,7 +2157,7 @@
/*
* Wait for transmitter & holding register to empty
*/
-static inline void wait_for_xmitr(struct uart_8250_port *up)
+static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
{
unsigned int status, tmout = 10000;
@@ -2178,7 +2171,7 @@
if (--tmout == 0)
break;
udelay(1);
- } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+ } while ((status & bits) != bits);
/* Wait up to 1s for flow control if necessary */
if (up->port.flags & UPF_CONS_FLOW) {
@@ -2218,7 +2211,7 @@
* Now, do each character
*/
for (i = 0; i < count; i++, s++) {
- wait_for_xmitr(up);
+ wait_for_xmitr(up, UART_LSR_THRE);
/*
* Send the character out.
@@ -2226,7 +2219,7 @@
*/
serial_out(up, UART_TX, *s);
if (*s == 10) {
- wait_for_xmitr(up);
+ wait_for_xmitr(up, UART_LSR_THRE);
serial_out(up, UART_TX, 13);
}
}
@@ -2235,8 +2228,9 @@
* Finally, wait for transmitter to become empty
* and restore the IER
*/
- wait_for_xmitr(up);
- serial_out(up, UART_IER, ier);
+ wait_for_xmitr(up, BOTH_EMPTY);
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, ier | UART_IER_THRI);
}
static int serial8250_console_setup(struct console *co, char *options)
diff --git a/drivers/serial/8250_acpi.c b/drivers/serial/8250_acpi.c
index a802bdc..809f89a 100644
--- a/drivers/serial/8250_acpi.c
+++ b/drivers/serial/8250_acpi.c
@@ -27,7 +27,7 @@
static acpi_status acpi_serial_mmio(struct uart_port *port,
struct acpi_resource_address64 *addr)
{
- port->mapbase = addr->min_address_range;
+ port->mapbase = addr->minimum;
port->iotype = UPIO_MEM;
port->flags |= UPF_IOREMAP;
return AE_OK;
@@ -36,8 +36,8 @@
static acpi_status acpi_serial_port(struct uart_port *port,
struct acpi_resource_io *io)
{
- if (io->range_length) {
- port->iobase = io->min_base_address;
+ if (io->address_length) {
+ port->iobase = io->minimum;
port->iotype = UPIO_PORT;
} else
printk(KERN_ERR "%s: zero-length IO port range?\n", __FUNCTION__);
@@ -45,13 +45,13 @@
}
static acpi_status acpi_serial_ext_irq(struct uart_port *port,
- struct acpi_resource_ext_irq *ext_irq)
+ struct acpi_resource_extended_irq *ext_irq)
{
int rc;
- if (ext_irq->number_of_interrupts > 0) {
+ if (ext_irq->interrupt_count > 0) {
rc = acpi_register_gsi(ext_irq->interrupts[0],
- ext_irq->edge_level, ext_irq->active_high_low);
+ ext_irq->triggering, ext_irq->polarity);
if (rc < 0)
return AE_ERROR;
port->irq = rc;
@@ -64,9 +64,9 @@
{
int rc;
- if (irq->number_of_interrupts > 0) {
+ if (irq->interrupt_count > 0) {
rc = acpi_register_gsi(irq->interrupts[0],
- irq->edge_level, irq->active_high_low);
+ irq->triggering, irq->polarity);
if (rc < 0)
return AE_ERROR;
port->irq = rc;
@@ -83,11 +83,11 @@
status = acpi_resource_to_address64(res, &addr);
if (ACPI_SUCCESS(status))
return acpi_serial_mmio(port, &addr);
- else if (res->id == ACPI_RSTYPE_IO)
+ else if (res->type == ACPI_RESOURCE_TYPE_IO)
return acpi_serial_port(port, &res->data.io);
- else if (res->id == ACPI_RSTYPE_EXT_IRQ)
+ else if (res->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ)
return acpi_serial_ext_irq(port, &res->data.extended_irq);
- else if (res->id == ACPI_RSTYPE_IRQ)
+ else if (res->type == ACPI_RESOURCE_TYPE_IRQ)
return acpi_serial_irq(port, &res->data.irq);
return AE_OK;
}
diff --git a/drivers/serial/8250_au1x00.c b/drivers/serial/8250_au1x00.c
index 06ae8fb..8d8d7a7 100644
--- a/drivers/serial/8250_au1x00.c
+++ b/drivers/serial/8250_au1x00.c
@@ -56,7 +56,6 @@
#elif defined(CONFIG_SOC_AU1550)
PORT(UART0_ADDR, AU1550_UART0_INT),
PORT(UART1_ADDR, AU1550_UART1_INT),
- PORT(UART2_ADDR, AU1550_UART2_INT),
PORT(UART3_ADDR, AU1550_UART3_INT),
#elif defined(CONFIG_SOC_AU1200)
PORT(UART0_ADDR, AU1200_UART0_INT),
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 2a91215..94886c0 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -439,6 +439,20 @@
return -ENODEV;
}
+static int pci_siig_setup(struct serial_private *priv,
+ struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
+
+ if (idx > 3) {
+ bar = 4;
+ offset = (idx - 4) * 8;
+ }
+
+ return setup_port(priv, port, bar, offset, 0);
+}
+
/*
* Timedia has an explosion of boards, and to avoid the PCI table from
* growing *huge*, we use this function to collapse some 70 entries
@@ -748,7 +762,7 @@
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig_init,
- .setup = pci_default_setup,
+ .setup = pci_siig_setup,
},
/*
* Titan cards
@@ -1868,6 +1882,10 @@
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0,
pbn_b0_4_1843200 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+ PCI_VENDOR_ID_AFAVLAB,
+ PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0,
+ pbn_b0_4_1152000 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0,
@@ -2141,6 +2159,15 @@
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_921600 },
/*
* Computone devices submitted by Doug McNash dmcnash@computone.com
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 9fd1925d..0f4361c 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -23,7 +23,7 @@
work.)
To compile this driver as a module, choose M here: the
- module will be called serial.
+ module will be called 8250.
[WARNING: Do not compile this driver as a module if you are using
non-standard serial ports, since the configuration information will
be lost when the driver is unloaded. This limitation may be lifted
@@ -98,6 +98,7 @@
config SERIAL_8250_RUNTIME_UARTS
int "Number of 8250/16550 serial ports to register at runtime"
depends on SERIAL_8250
+ range 0 SERIAL_8250_NR_UARTS
default "4"
help
Set this to the maximum number of serial ports you want
@@ -892,20 +893,20 @@
a console on a serial port, say Y. Otherwise, say N.
config SERIAL_JSM
- tristate "Digi International NEO PCI Support"
- depends on PCI && BROKEN
- select SERIAL_CORE
- help
- This is a driver for Digi International's Neo series
- of cards which provide multiple serial ports. You would need
- something like this to connect more than two modems to your Linux
- box, for instance in order to become a dial-in server. This driver
- supports PCI boards only.
- If you have a card like this, say Y here and read the file
- <file:Documentation/jsm.txt>.
+ tristate "Digi International NEO PCI Support"
+ depends on PCI
+ select SERIAL_CORE
+ help
+ This is a driver for Digi International's Neo series
+ of cards which provide multiple serial ports. You would need
+ something like this to connect more than two modems to your Linux
+ box, for instance in order to become a dial-in server. This driver
+ supports PCI boards only.
+ If you have a card like this, say Y here and read the file
+ <file:Documentation/jsm.txt>.
- To compile this driver as a module, choose M here: the
- module will be called jsm.
+ To compile this driver as a module, choose M here: the
+ module will be called jsm.
config SERIAL_SGI_IOC4
tristate "SGI IOC4 controller serial support"
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 3490022..321a3b3 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -561,12 +561,12 @@
.port = {
.membase = (void *)IO_ADDRESS(INTEGRATOR_UART0_BASE),
.mapbase = INTEGRATOR_UART0_BASE,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = IRQ_UARTINT0,
.uartclk = 14745600,
.fifosize = 16,
.ops = &amba_pl010_pops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.dtr_mask = 1 << 5,
@@ -576,12 +576,12 @@
.port = {
.membase = (void *)IO_ADDRESS(INTEGRATOR_UART1_BASE),
.mapbase = INTEGRATOR_UART1_BASE,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = IRQ_UARTINT1,
.uartclk = 14745600,
.fifosize = 16,
.ops = &amba_pl010_pops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.dtr_mask = 1 << 7,
diff --git a/drivers/serial/au1x00_uart.c b/drivers/serial/au1x00_uart.c
index ceb5d7f..344022fe 100644
--- a/drivers/serial/au1x00_uart.c
+++ b/drivers/serial/au1x00_uart.c
@@ -892,7 +892,7 @@
int ret = 0;
switch (up->port.iotype) {
- case SERIAL_IO_MEM:
+ case UPIO_MEM:
if (up->port.mapbase) {
*res = request_mem_region(up->port.mapbase, size, "serial");
if (!*res)
@@ -900,8 +900,8 @@
}
break;
- case SERIAL_IO_HUB6:
- case SERIAL_IO_PORT:
+ case UPIO_HUB6:
+ case UPIO_PORT:
*res = request_region(up->port.iobase, size, "serial");
if (!*res)
ret = -EBUSY;
@@ -919,7 +919,7 @@
size <<= up->port.regshift;
switch (up->port.iotype) {
- case SERIAL_IO_MEM:
+ case UPIO_MEM:
if (up->port.mapbase) {
/*
* Unmap the area.
@@ -935,8 +935,8 @@
}
break;
- case SERIAL_IO_HUB6:
- case SERIAL_IO_PORT:
+ case UPIO_HUB6:
+ case UPIO_PORT:
start = up->port.iobase;
if (size)
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 8ef9994..ce7b2e4 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -410,7 +410,7 @@
.fifosize = 16,
.ops = &clps711x_pops,
.line = 0,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
},
{
.iobase = SYSCON2,
@@ -419,7 +419,7 @@
.fifosize = 16,
.ops = &clps711x_pops,
.line = 1,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
}
};
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 16af562..b7bf4c6 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -252,12 +252,9 @@
/* If we have not enough room in tty flip buffer, then we try
* later, which will be the next rx-interrupt or a timeout
*/
- if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) {
- tty->flip.work.func((void *)tty);
- if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) {
- printk(KERN_WARNING "TTY_DONT_FLIP set\n");
- return;
- }
+ if(tty_buffer_request_room(tty, i) < i) {
+ printk(KERN_WARNING "No room in flip buffer\n");
+ return;
}
/* get pointer */
@@ -276,9 +273,7 @@
continue;
error_return:
- *tty->flip.char_buf_ptr++ = ch;
- *tty->flip.flag_buf_ptr++ = flg;
- tty->flip.count++;
+ tty_insert_flip_char(tty, ch, flg);
} /* End while (i--) */
@@ -908,7 +903,7 @@
.port = {
.irq = SMC1_IRQ,
.ops = &cpm_uart_pops,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.lock = SPIN_LOCK_UNLOCKED,
},
.flags = FLAG_SMC,
@@ -922,7 +917,7 @@
.port = {
.irq = SMC2_IRQ,
.ops = &cpm_uart_pops,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.lock = SPIN_LOCK_UNLOCKED,
},
.flags = FLAG_SMC,
@@ -939,7 +934,7 @@
.port = {
.irq = SCC1_IRQ,
.ops = &cpm_uart_pops,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.lock = SPIN_LOCK_UNLOCKED,
},
.tx_nrfifos = TX_NUM_FIFO,
@@ -953,7 +948,7 @@
.port = {
.irq = SCC2_IRQ,
.ops = &cpm_uart_pops,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.lock = SPIN_LOCK_UNLOCKED,
},
.tx_nrfifos = TX_NUM_FIFO,
@@ -967,7 +962,7 @@
.port = {
.irq = SCC3_IRQ,
.ops = &cpm_uart_pops,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.lock = SPIN_LOCK_UNLOCKED,
},
.tx_nrfifos = TX_NUM_FIFO,
@@ -981,7 +976,7 @@
.port = {
.irq = SCC4_IRQ,
.ops = &cpm_uart_pops,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.lock = SPIN_LOCK_UNLOCKED,
},
.tx_nrfifos = TX_NUM_FIFO,
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index a64ba26..ba5541d 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -262,6 +262,7 @@
}
tty_insert_flip_char(tty, ch, flag);
ignore_char:
+ ;
} while (status & DZ_DVAL);
if (tty)
@@ -650,7 +651,7 @@
for (i = 0, dport = dz_ports; i < DZ_NB_PORT; i++, dport++) {
spin_lock_init(&dport->port.lock);
dport->port.membase = (char *) base;
- dport->port.iotype = SERIAL_IO_PORT;
+ dport->port.iotype = UPIO_PORT;
dport->port.irq = dec_interrupt[DEC_IRQ_DZ11];
dport->port.line = i;
dport->port.fifosize = 1;
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 587cc6a..4d53fb5 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -402,10 +402,10 @@
DRIVER_NAME, sport);
if (retval) goto error_out2;
- retval = request_irq(sport->rtsirq, imx_rtsint, 0,
+ retval = request_irq(sport->rtsirq, imx_rtsint,
+ SA_TRIGGER_FALLING | SA_TRIGGER_RISING,
DRIVER_NAME, sport);
if (retval) goto error_out3;
- set_irq_type(sport->rtsirq, IRQT_BOTHEDGE);
/*
* Finally, clear and enable interrupts
@@ -668,13 +668,13 @@
.rtsirq = UART1_MINT_RTS,
.port = {
.type = PORT_IMX,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.membase = (void *)IMX_UART1_BASE,
.mapbase = IMX_UART1_BASE, /* FIXME */
.irq = UART1_MINT_RX,
.uartclk = 16000000,
.fifosize = 8,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.ops = &imx_pops,
.line = 0,
},
@@ -684,13 +684,13 @@
.rtsirq = UART2_MINT_RTS,
.port = {
.type = PORT_IMX,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.membase = (void *)IMX_UART2_BASE,
.mapbase = IMX_UART2_BASE, /* FIXME */
.irq = UART2_MINT_RX,
.uartclk = 16000000,
.fifosize = 8,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.ops = &imx_pops,
.line = 1,
},
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 66f117d..419dd3c 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -215,7 +215,7 @@
/* Lower and upper byte of baud rate generator divisor. */
write_zsreg(channel, R12, regs[R12]);
write_zsreg(channel, R13, regs[R13]);
-
+
/* Now rewrite R14, with BRENAB (if set). */
write_zsreg(channel, R14, regs[R14]);
@@ -571,7 +571,7 @@
else
clear_bits |= DTR;
- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
up->curregs[R5] |= set_bits;
up->curregs[R5] &= ~clear_bits;
write_zsreg(channel, R5, up->curregs[R5]);
@@ -654,7 +654,7 @@
if (new_reg != up->curregs[R15]) {
up->curregs[R15] = new_reg;
- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
write_zsreg(channel, R15, up->curregs[R15]);
}
}
@@ -680,7 +680,7 @@
if (new_reg != up->curregs[R5]) {
up->curregs[R5] = new_reg;
- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
write_zsreg(channel, R5, up->curregs[R5]);
}
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 1875319..dfc1e86 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -380,7 +380,6 @@
extern struct uart_driver jsm_uart_driver;
extern struct board_ops jsm_neo_ops;
extern int jsm_debug;
-extern int jsm_rawreadok;
/*************************************************************************
*
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 7e56c78..b1b66e7 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -49,11 +49,8 @@
};
int jsm_debug;
-int jsm_rawreadok;
module_param(jsm_debug, int, 0);
-module_param(jsm_rawreadok, int, 0);
MODULE_PARM_DESC(jsm_debug, "Driver debugging level");
-MODULE_PARM_DESC(jsm_rawreadok, "Bypass flip buffers on input");
static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index 6f22b42..87e4e2c 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -965,56 +965,47 @@
baud = ch->ch_custom_speed;
if (ch->ch_flags & CH_BAUD0)
ch->ch_flags &= ~(CH_BAUD0);
- } else {
- int iindex = 0;
- int jindex = 0;
+ } else {
+ int i;
+ unsigned int cflag;
+ static struct {
+ unsigned int rate;
+ unsigned int cflag;
+ } baud_rates[] = {
+ { 921600, B921600 },
+ { 460800, B460800 },
+ { 230400, B230400 },
+ { 115200, B115200 },
+ { 57600, B57600 },
+ { 38400, B38400 },
+ { 19200, B19200 },
+ { 9600, B9600 },
+ { 4800, B4800 },
+ { 2400, B2400 },
+ { 1200, B1200 },
+ { 600, B600 },
+ { 300, B300 },
+ { 200, B200 },
+ { 150, B150 },
+ { 134, B134 },
+ { 110, B110 },
+ { 75, B75 },
+ { 50, B50 },
+ };
- const u64 bauds[4][16] = {
- {
- 0, 50, 75, 110,
- 134, 150, 200, 300,
- 600, 1200, 1800, 2400,
- 4800, 9600, 19200, 38400 },
- {
- 0, 57600, 115200, 230400,
- 460800, 150, 200, 921600,
- 600, 1200, 1800, 2400,
- 4800, 9600, 19200, 38400 },
- {
- 0, 57600, 76800, 115200,
- 131657, 153600, 230400, 460800,
- 921600, 1200, 1800, 2400,
- 4800, 9600, 19200, 38400 },
- {
- 0, 57600, 115200, 230400,
- 460800, 150, 200, 921600,
- 600, 1200, 1800, 2400,
- 4800, 9600, 19200, 38400 }
- };
-
- baud = C_BAUD(ch->uart_port.info->tty) & 0xff;
-
- if (ch->ch_c_cflag & CBAUDEX)
- iindex = 1;
-
- jindex = baud;
-
- if ((iindex >= 0) && (iindex < 4) && (jindex >= 0) && (jindex < 16))
- baud = bauds[iindex][jindex];
- else {
- jsm_printk(IOCTL, DEBUG, &ch->ch_bd->pci_dev,
- "baud indices were out of range (%d)(%d)",
- iindex, jindex);
- baud = 0;
+ cflag = C_BAUD(ch->uart_port.info->tty);
+ baud = 9600;
+ for (i = 0; i < ARRAY_SIZE(baud_rates); i++) {
+ if (baud_rates[i].cflag == cflag) {
+ baud = baud_rates[i].rate;
+ break;
}
-
- if (baud == 0)
- baud = 9600;
-
- if (ch->ch_flags & CH_BAUD0)
- ch->ch_flags &= ~(CH_BAUD0);
}
+ if (ch->ch_flags & CH_BAUD0)
+ ch->ch_flags &= ~(CH_BAUD0);
+ }
+
if (ch->ch_c_cflag & PARENB)
lcr |= UART_LCR_PARITY;
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 6fa0d62..4d48b62 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -20,8 +20,10 @@
*
* Contact Information:
* Scott H Kilau <Scott_Kilau@digi.com>
- * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
- *
+ * Ananda Venkatarman <mansarov@us.ibm.com>
+ * Modifications:
+ * 01/19/06: changed jsm_input routine to use the dynamically allocated
+ * tty_buffer changes. Contributors: Scott Kilau and Ananda V.
***********************************************************************/
#include <linux/tty.h>
#include <linux/tty_flip.h>
@@ -497,16 +499,15 @@
{
struct jsm_board *bd;
struct tty_struct *tp;
+ struct tty_ldisc *ld;
u32 rmask;
u16 head;
u16 tail;
int data_len;
unsigned long lock_flags;
- int flip_len;
+ int flip_len = 0;
int len = 0;
int n = 0;
- char *buf = NULL;
- char *buf2 = NULL;
int s = 0;
int i = 0;
@@ -574,56 +575,50 @@
/*
* If the rxbuf is empty and we are not throttled, put as much
- * as we can directly into the linux TTY flip buffer.
- * The jsm_rawreadok case takes advantage of carnal knowledge that
- * the char_buf and the flag_buf are next to each other and
- * are each of (2 * TTY_FLIPBUF_SIZE) size.
+ * as we can directly into the linux TTY buffer.
*
- * NOTE: if(!tty->real_raw), the call to ldisc.receive_buf
- *actually still uses the flag buffer, so you can't
- *use it for input data
*/
- if (jsm_rawreadok) {
- if (tp->real_raw)
- flip_len = MYFLIPLEN;
- else
- flip_len = 2 * TTY_FLIPBUF_SIZE;
- } else
- flip_len = TTY_FLIPBUF_SIZE - tp->flip.count;
+ flip_len = TTY_FLIPBUF_SIZE;
len = min(data_len, flip_len);
len = min(len, (N_TTY_BUF_SIZE - 1) - tp->read_cnt);
+ ld = tty_ldisc_ref(tp);
+
+ /*
+ * If the DONT_FLIP flag is on, don't flush our buffer, and act
+ * like the ld doesn't have any space to put the data right now.
+ */
+ if (test_bit(TTY_DONT_FLIP, &tp->flags))
+ len = 0;
+
+ /*
+ * If we were unable to get a reference to the ld,
+ * don't flush our buffer, and act like the ld doesn't
+ * have any space to put the data right now.
+ */
+ if (!ld) {
+ len = 0;
+ } else {
+ /*
+ * If ld doesn't have a pointer to a receive_buf function,
+ * flush the data, then act like the ld doesn't have any
+ * space to put the data right now.
+ */
+ if (!ld->receive_buf) {
+ ch->ch_r_head = ch->ch_r_tail;
+ len = 0;
+ }
+ }
if (len <= 0) {
spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n");
+ if (ld)
+ tty_ldisc_deref(ld);
return;
}
- /*
- * If we're bypassing flip buffers on rx, we can blast it
- * right into the beginning of the buffer.
- */
- if (jsm_rawreadok) {
- if (tp->real_raw) {
- if (ch->ch_flags & CH_FLIPBUF_IN_USE) {
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
- "JSM - FLIPBUF in use. delaying input\n");
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
- return;
- }
- ch->ch_flags |= CH_FLIPBUF_IN_USE;
- buf = ch->ch_bd->flipbuf;
- buf2 = NULL;
- } else {
- buf = tp->flip.char_buf;
- buf2 = tp->flip.flag_buf;
- }
- } else {
- buf = tp->flip.char_buf_ptr;
- buf2 = tp->flip.flag_buf_ptr;
- }
-
+ len = tty_buffer_request_room(tp, len);
n = len;
/*
@@ -638,121 +633,47 @@
if (s <= 0)
break;
- memcpy(buf, ch->ch_rqueue + tail, s);
+ /*
+ * If conditions are such that ld needs to see all
+ * UART errors, we will have to walk each character
+ * and error byte and send them to the buffer one at
+ * a time.
+ */
- /* buf2 is only set when port isn't raw */
- if (buf2)
- memcpy(buf2, ch->ch_equeue + tail, s);
-
+ if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
+ for (i = 0; i < s; i++) {
+ /*
+ * Give the Linux ld the flags in the
+ * format it likes.
+ */
+ if (*(ch->ch_equeue +tail +i) & UART_LSR_BI)
+ tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_BREAK);
+ else if (*(ch->ch_equeue +tail +i) & UART_LSR_PE)
+ tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_PARITY);
+ else if (*(ch->ch_equeue +tail +i) & UART_LSR_FE)
+ tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_FRAME);
+ else
+ tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_NORMAL);
+ }
+ } else {
+ tty_insert_flip_string(tp, ch->ch_rqueue + tail, s) ;
+ }
tail += s;
- buf += s;
- if (buf2)
- buf2 += s;
n -= s;
/* Flip queue if needed */
tail &= rmask;
}
- /*
- * In high performance mode, we don't have to update
- * flag_buf or any of the counts or pointers into flip buf.
- */
- if (!jsm_rawreadok) {
- if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
- for (i = 0; i < len; i++) {
- /*
- * Give the Linux ld the flags in the
- * format it likes.
- */
- if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI)
- tp->flip.flag_buf_ptr[i] = TTY_BREAK;
- else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE)
- tp->flip.flag_buf_ptr[i] = TTY_PARITY;
- else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE)
- tp->flip.flag_buf_ptr[i] = TTY_FRAME;
- else
- tp->flip.flag_buf_ptr[i] = TTY_NORMAL;
- }
- } else {
- memset(tp->flip.flag_buf_ptr, 0, len);
- }
+ ch->ch_r_tail = tail & rmask;
+ ch->ch_e_tail = tail & rmask;
+ jsm_check_queue_flow_control(ch);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
- tp->flip.char_buf_ptr += len;
- tp->flip.flag_buf_ptr += len;
- tp->flip.count += len;
- }
- else if (!tp->real_raw) {
- if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
- for (i = 0; i < len; i++) {
- /*
- * Give the Linux ld the flags in the
- * format it likes.
- */
- if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI)
- tp->flip.flag_buf_ptr[i] = TTY_BREAK;
- else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE)
- tp->flip.flag_buf_ptr[i] = TTY_PARITY;
- else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE)
- tp->flip.flag_buf_ptr[i] = TTY_FRAME;
- else
- tp->flip.flag_buf_ptr[i] = TTY_NORMAL;
- }
- } else
- memset(tp->flip.flag_buf, 0, len);
- }
+ /* Tell the tty layer its okay to "eat" the data now */
+ tty_flip_buffer_push(tp);
- /*
- * If we're doing raw reads, jam it right into the
- * line disc bypassing the flip buffers.
- */
- if (jsm_rawreadok) {
- if (tp->real_raw) {
- ch->ch_r_tail = tail & rmask;
- ch->ch_e_tail = tail & rmask;
-
- jsm_check_queue_flow_control(ch);
-
- /* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */
-
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
- "jsm_input. %d real_raw len:%d calling receive_buf for board %d\n",
- __LINE__, len, ch->ch_bd->boardnum);
- tp->ldisc.receive_buf(tp, ch->ch_bd->flipbuf, NULL, len);
-
- /* Allow use of channel flip buffer again */
- spin_lock_irqsave(&ch->ch_lock, lock_flags);
- ch->ch_flags &= ~CH_FLIPBUF_IN_USE;
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-
- } else {
- ch->ch_r_tail = tail & rmask;
- ch->ch_e_tail = tail & rmask;
-
- jsm_check_queue_flow_control(ch);
-
- /* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
- "jsm_input. %d not real_raw len:%d calling receive_buf for board %d\n",
- __LINE__, len, ch->ch_bd->boardnum);
-
- tp->ldisc.receive_buf(tp, tp->flip.char_buf, tp->flip.flag_buf, len);
- }
- } else {
- ch->ch_r_tail = tail & rmask;
- ch->ch_e_tail = tail & rmask;
-
- jsm_check_queue_flow_control(ch);
-
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
- "jsm_input. %d not jsm_read raw okay scheduling flip\n", __LINE__);
- tty_schedule_flip(tp);
- }
+ if (ld)
+ tty_ldisc_deref(ld);
jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n");
}
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index b48066a..242a041 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -80,7 +80,7 @@
#include <asm/serial.h>
/* Standard COM flags */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
diff --git a/drivers/serial/m32r_sio.h b/drivers/serial/m32r_sio.h
index 07d0dd8..7c3ec24 100644
--- a/drivers/serial/m32r_sio.h
+++ b/drivers/serial/m32r_sio.h
@@ -37,7 +37,7 @@
unsigned int irq;
unsigned int flags;
unsigned char io_type;
- unsigned char *iomem_base;
+ unsigned char __iomem *iomem_base;
unsigned short iomem_reg_shift;
};
diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
index d957a3a..8cbbb95 100644
--- a/drivers/serial/mcfserial.c
+++ b/drivers/serial/mcfserial.c
@@ -57,20 +57,16 @@
* keep going. Perhaps one day the cflag settings for the
* console can be used instead.
*/
-#if defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
- defined(CONFIG_senTec) || defined(CONFIG_SNEHA)
-#define CONSOLE_BAUD_RATE 19200
-#define DEFAULT_CBAUD B19200
-#endif
-
#if defined(CONFIG_HW_FEITH)
#define CONSOLE_BAUD_RATE 38400
#define DEFAULT_CBAUD B38400
-#endif
-
-#if defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB)
+#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB)
#define CONSOLE_BAUD_RATE 115200
#define DEFAULT_CBAUD B115200
+#elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
+ defined(CONFIG_senTec) || defined(CONFIG_SNEHA)
+#define CONSOLE_BAUD_RATE 19200
+#define DEFAULT_CBAUD B19200
#endif
#ifndef CONSOLE_BAUD_RATE
@@ -350,8 +346,7 @@
}
tty_insert_flip_char(tty, ch, flag);
}
-
- schedule_work(&tty->flip.work);
+ tty_schedule_flip(tty);
return;
}
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 4e49168..868eaf4 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -462,7 +462,7 @@
port->mapbase = dev->hpa.start + MUX_OFFSET +
(i * MUX_LINE_OFFSET);
port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET);
- port->iotype = SERIAL_IO_MEM;
+ port->iotype = UPIO_MEM;
port->type = PORT_MUX;
port->irq = NO_IRQ;
port->uartclk = 0;
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 4e03a87..9b7ed58 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1492,7 +1492,7 @@
/*
* Init remaining bits of "port" structure
*/
- uap->port.iotype = SERIAL_IO_MEM;
+ uap->port.iotype = UPIO_MEM;
uap->port.irq = np->intrs[0].line;
uap->port.uartclk = ZS_CLOCK;
uap->port.fifosize = 1;
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index eb4883e..7410e09 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -161,7 +161,11 @@
/* we can support 3 uarts, but not always use them */
+#ifdef CONFIG_CPU_S3C2400
+#define NR_PORTS (2)
+#else
#define NR_PORTS (3)
+#endif
/* port irq numbers */
@@ -1060,7 +1064,7 @@
dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
port->mapbase = res->start;
- port->membase = S3C24XX_VA_UART + (res->start - S3C2410_PA_UART);
+ port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
port->irq = platform_get_irq(platdev, 0);
ourport->clk = clk_get(&platdev->dev, "uart");
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 1bd9316..2c00b86 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -628,7 +628,7 @@
sa1100_ports[i].port.ops = &sa1100_pops;
sa1100_ports[i].port.fifosize = 8;
sa1100_ports[i].port.line = i;
- sa1100_ports[i].port.iotype = SERIAL_IO_MEM;
+ sa1100_ports[i].port.iotype = UPIO_MEM;
init_timer(&sa1100_ports[i].timer);
sa1100_ports[i].timer.function = sa1100_timeout;
sa1100_ports[i].timer.data = (unsigned long)&sa1100_ports[i];
@@ -665,21 +665,21 @@
sa1100_ports[idx].port.membase = (void __iomem *)&Ser1UTCR0;
sa1100_ports[idx].port.mapbase = _Ser1UTCR0;
sa1100_ports[idx].port.irq = IRQ_Ser1UART;
- sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF;
+ sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF;
break;
case 2:
sa1100_ports[idx].port.membase = (void __iomem *)&Ser2UTCR0;
sa1100_ports[idx].port.mapbase = _Ser2UTCR0;
sa1100_ports[idx].port.irq = IRQ_Ser2ICP;
- sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF;
+ sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF;
break;
case 3:
sa1100_ports[idx].port.membase = (void __iomem *)&Ser3UTCR0;
sa1100_ports[idx].port.mapbase = _Ser3UTCR0;
sa1100_ports[idx].port.irq = IRQ_Ser3UART;
- sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF;
+ sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF;
break;
default:
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 9437704..95fb493 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -332,7 +332,7 @@
struct termios *old, unsigned int min, unsigned int max)
{
unsigned int try, baud, altbaud = 38400;
- unsigned int flags = port->flags & UPF_SPD_MASK;
+ upf_t flags = port->flags & UPF_SPD_MASK;
if (flags == UPF_SPD_HI)
altbaud = 57600;
@@ -615,8 +615,9 @@
struct serial_struct new_serial;
struct uart_port *port = state->port;
unsigned long new_port;
- unsigned int change_irq, change_port, old_flags, closing_wait;
+ unsigned int change_irq, change_port, closing_wait;
unsigned int old_custom_divisor, close_delay;
+ upf_t old_flags, new_flags;
int retval = 0;
if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
@@ -655,6 +656,7 @@
new_serial.type != port->type;
old_flags = port->flags;
+ new_flags = new_serial.flags;
old_custom_divisor = port->custom_divisor;
if (!capable(CAP_SYS_ADMIN)) {
@@ -664,10 +666,10 @@
(close_delay != state->close_delay) ||
(closing_wait != state->closing_wait) ||
(new_serial.xmit_fifo_size != port->fifosize) ||
- (((new_serial.flags ^ old_flags) & ~UPF_USR_MASK) != 0))
+ (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
goto exit;
port->flags = ((port->flags & ~UPF_USR_MASK) |
- (new_serial.flags & UPF_USR_MASK));
+ (new_flags & UPF_USR_MASK));
port->custom_divisor = new_serial.custom_divisor;
goto check_and_exit;
}
@@ -764,7 +766,7 @@
port->irq = new_serial.irq;
port->uartclk = new_serial.baud_base * 16;
port->flags = (port->flags & ~UPF_CHANGE_MASK) |
- (new_serial.flags & UPF_CHANGE_MASK);
+ (new_flags & UPF_CHANGE_MASK);
port->custom_divisor = new_serial.custom_divisor;
state->close_delay = close_delay;
state->closing_wait = closing_wait;
@@ -1870,7 +1872,7 @@
mutex_lock(&state->mutex);
if (state->info && state->info->flags & UIF_INITIALIZED) {
- struct uart_ops *ops = port->ops;
+ const struct uart_ops *ops = port->ops;
spin_lock_irq(&port->lock);
ops->stop_tx(port);
@@ -1932,7 +1934,7 @@
}
if (state->info && state->info->flags & UIF_INITIALIZED) {
- struct uart_ops *ops = port->ops;
+ const struct uart_ops *ops = port->ops;
int ret;
ops->set_mctrl(port, 0);
@@ -2235,7 +2237,7 @@
* If this port is a console, then the spinlock is already
* initialised.
*/
- if (!uart_console(port))
+ if (!(uart_console(port) && (port->cons->flags & CON_ENABLED)))
spin_lock_init(&port->lock);
uart_configure_port(drv, state, port);
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index d4a1f0e..04186ea 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -501,12 +501,12 @@
.port = {
.membase = (void*) io_p2v (UART1_PHYS),
.mapbase = UART1_PHYS,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = IRQ_UART1INTR,
.uartclk = 14745600/2,
.fifosize = 16,
.ops = &lh7a40x_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
},
@@ -514,12 +514,12 @@
.port = {
.membase = (void*) io_p2v (UART2_PHYS),
.mapbase = UART2_PHYS,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = IRQ_UART2INTR,
.uartclk = 14745600/2,
.fifosize = 16,
.ops = &lh7a40x_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
},
@@ -527,12 +527,12 @@
.port = {
.membase = (void*) io_p2v (UART3_PHYS),
.mapbase = UART3_PHYS,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = IRQ_UART3INTR,
.uartclk = 14745600/2,
.fifosize = 16,
.ops = &lh7a40x_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 2,
},
},
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index a9e0707..44f6bf7 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -42,6 +42,7 @@
#include <linux/delay.h>
#include <linux/console.h>
#include <linux/bitops.h>
+#include <linux/generic_serial.h>
#ifdef CONFIG_CPU_FREQ
#include <linux/notifier.h>
@@ -53,7 +54,9 @@
#include <asm/irq.h>
#include <asm/uaccess.h>
-#include <linux/generic_serial.h>
+#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#include <asm/clock.h>
+#endif
#ifdef CONFIG_SH_STANDARD_BIOS
#include <asm/sh_bios.h>
@@ -86,9 +89,11 @@
static int sci_request_irq(struct sci_port *port);
static void sci_free_irq(struct sci_port *port);
-static struct sci_port sci_ports[SCI_NPORTS];
+static struct sci_port sci_ports[];
static struct uart_driver sci_uart_driver;
+#define SCI_NPORTS sci_uart_driver.nr
+
#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
static void handle_error(struct uart_port *port)
@@ -168,7 +173,7 @@
int usegdb=0;
#ifdef CONFIG_SH_STANDARD_BIOS
- /* This call only does a trap the first time it is
+ /* This call only does a trap the first time it is
* called, and so is safe to do here unconditionally
*/
usegdb |= sh_bios_in_gdb_mode();
@@ -324,47 +329,46 @@
/* tx mark output*/
H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
}
-#else
-static void sci_init_pins_sci(struct uart_port *port, unsigned int cflag)
-{
-}
#endif
#endif
#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
-#if defined(CONFIG_CPU_SH3)
-/* For SH7705, SH7707, SH7709, SH7709A, SH7729, SH7300*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+/* SH7300 doesn't use RTS/CTS */
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+ sci_out(port, SCFCR, 0);
+}
+#elif defined(CONFIG_CPU_SH3)
+/* For SH7705, SH7707, SH7709, SH7709A, SH7729 */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
unsigned int fcr_val = 0;
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300) /* SH7300 doesn't use RTS/CTS */
- {
- unsigned short data;
+ unsigned short data;
- /* We need to set SCPCR to enable RTS/CTS */
- data = ctrl_inw(SCPCR);
- /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
- ctrl_outw(data&0x0fcf, SCPCR);
- }
+ /* We need to set SCPCR to enable RTS/CTS */
+ data = ctrl_inw(SCPCR);
+ /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
+ ctrl_outw(data & 0x0fcf, SCPCR);
+
if (cflag & CRTSCTS)
fcr_val |= SCFCR_MCE;
else {
- unsigned short data;
-
/* We need to set SCPCR to enable RTS/CTS */
data = ctrl_inw(SCPCR);
/* Clear out SCP7MD1,0, SCP4MD1,0,
Set SCP6MD1,0 = {01} (output) */
- ctrl_outw((data&0x0fcf)|0x1000, SCPCR);
+ ctrl_outw((data & 0x0fcf) | 0x1000, SCPCR);
data = ctrl_inb(SCPDR);
/* Set /RTS2 (bit6) = 0 */
- ctrl_outb(data&0xbf, SCPDR);
+ ctrl_outb(data & 0xbf, SCPDR);
}
-#endif
+
sci_out(port, SCFCR, fcr_val);
}
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
{
unsigned int fcr_val = 0;
@@ -374,7 +378,7 @@
sci_out(port, SCFCR, fcr_val);
}
-
+#endif
#else
/* For SH7750 */
@@ -385,7 +389,11 @@
if (cflag & CRTSCTS) {
fcr_val |= SCFCR_MCE;
} else {
+#ifdef CONFIG_CPU_SUBTYPE_SH7780
+ ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
+#else
ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
+#endif
}
sci_out(port, SCFCR, fcr_val);
}
@@ -422,7 +430,11 @@
#if !defined(SCI_ONLY)
if (port->type == PORT_SCIF) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+ txroom = SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f);
+#else
txroom = SCIF_TXROOM_MAX - (sci_in(port, SCFDR)>>8);
+#endif
} else {
txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0;
}
@@ -491,7 +503,11 @@
while (1) {
#if !defined(SCI_ONLY)
if (port->type == PORT_SCIF) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+ count = sci_in(port, SCRFDR) & 0x7f;
+#else
count = sci_in(port, SCFDR)&SCIF_RFDC_MASK ;
+#endif
} else {
count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0;
}
@@ -652,7 +668,7 @@
struct tty_struct *tty = port->info->tty;
struct sci_port *s = &sci_ports[port->line];
- if (!s->break_flag && status & SCxSR_BRK(port))
+ if (!s->break_flag && status & SCxSR_BRK(port)) {
#if defined(CONFIG_CPU_SH3)
/* Debounce break */
s->break_flag = 1;
@@ -783,6 +799,7 @@
(phase == CPUFREQ_RESUMECHANGE)){
for (i = 0; i < SCI_NPORTS; i++) {
struct uart_port *port = &sci_ports[i].port;
+ struct clk *clk;
/*
* Update the uartclk per-port if frequency has
@@ -795,7 +812,9 @@
*
* Clean this up later..
*/
- port->uartclk = current_cpu_data.module_clock * 16;
+ clk = clk_get("module_clk");
+ port->uartclk = clk_get_rate(clk) * 16;
+ clk_put(clk);
}
printk("%s: got a postchange notification for cpu %d (old %d, new %d)\n",
@@ -1008,15 +1027,20 @@
sci_out(port, SCSMR, smr_val);
switch (baud) {
- case 0: t = -1; break;
- case 2400: t = BPS_2400; break;
- case 4800: t = BPS_4800; break;
- case 9600: t = BPS_9600; break;
- case 19200: t = BPS_19200; break;
- case 38400: t = BPS_38400; break;
- case 57600: t = BPS_57600; break;
- case 115200: t = BPS_115200; break;
- default: t = SCBRR_VALUE(baud); break;
+ case 0:
+ t = -1;
+ break;
+ default:
+ {
+#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+ struct clk *clk = clk_get("module_clk");
+ t = SCBRR_VALUE(baud, clk_get_rate(clk));
+ clk_put(clk);
+#else
+ t = SCBRR_VALUE(baud);
+#endif
+ }
+ break;
}
if (t > 0) {
@@ -1030,7 +1054,9 @@
udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
}
- s->init_pins(port, termios->c_cflag);
+ if (likely(s->init_pins))
+ s->init_pins(port, termios->c_cflag);
+
sci_out(port, SCSCR, SCSCR_INIT(port));
if ((termios->c_cflag & CREAD) != 0)
@@ -1107,31 +1133,30 @@
.verify_port = sci_verify_port,
};
-static struct sci_port sci_ports[SCI_NPORTS] = {
+static struct sci_port sci_ports[] = {
#if defined(CONFIG_CPU_SUBTYPE_SH7708)
{
.port = {
.membase = (void *)0xfffffe80,
.mapbase = 0xfffffe80,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 25,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCI,
.irqs = SCI_IRQS,
- .init_pins = sci_init_pins_sci,
},
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
{
.port = {
.membase = (void *)SCIF0,
.mapbase = SCIF0,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 55,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
@@ -1142,10 +1167,10 @@
.port = {
.membase = (void *)SCIF2,
.mapbase = SCIF2,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 59,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCIF,
@@ -1157,24 +1182,23 @@
.port = {
.membase = (void *)0xfffffe80,
.mapbase = 0xfffffe80,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 25,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCI,
.irqs = SCI_IRQS,
- .init_pins = sci_init_pins_sci,
},
{
.port = {
.membase = (void *)0xa4000150,
.mapbase = 0xa4000150,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 59,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCIF,
@@ -1185,10 +1209,10 @@
.port = {
.membase = (void *)0xa4000140,
.mapbase = 0xa4000140,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 55,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 2,
},
.type = PORT_IRDA,
@@ -1200,10 +1224,10 @@
.port = {
.membase = (void *)0xA4430000,
.mapbase = 0xA4430000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 25,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
@@ -1215,25 +1239,25 @@
.port = {
.membase = (void *)0xffe00000,
.mapbase = 0xffe00000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 25,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
.irqs = SH73180_SCIF_IRQS,
.init_pins = sci_init_pins_scif,
},
-#elif defined(CONFIG_SH_RTS7751R2D)
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
{
.port = {
.membase = (void *)0xffe80000,
.mapbase = 0xffe80000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 43,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
@@ -1245,24 +1269,23 @@
.port = {
.membase = (void *)0xffe00000,
.mapbase = 0xffe00000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 25,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCI,
.irqs = SCI_IRQS,
- .init_pins = sci_init_pins_sci,
},
{
.port = {
.membase = (void *)0xffe80000,
.mapbase = 0xffe80000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 43,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCIF,
@@ -1274,10 +1297,10 @@
.port = {
.membase = (void *)0xfe600000,
.mapbase = 0xfe600000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 55,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
@@ -1288,10 +1311,10 @@
.port = {
.membase = (void *)0xfe610000,
.mapbase = 0xfe610000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 75,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCIF,
@@ -1302,40 +1325,25 @@
.port = {
.membase = (void *)0xfe620000,
.mapbase = 0xfe620000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 79,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 2,
},
.type = PORT_SCIF,
.irqs = SH7760_SCIF2_IRQS,
.init_pins = sci_init_pins_scif,
},
-#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
- {
- .port = {
- .membase = (void *)0xffe80000,
- .mapbase = 0xffe80000,
- .iotype = SERIAL_IO_MEM,
- .irq = 43,
- .ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCIF,
- .irqs = SH4_SCIF_IRQS,
- .init_pins = sci_init_pins_scif,
- },
#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
{
.port = {
.membase = (void *)0xffe00000,
.mapbase = 0xffe00000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 26,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
@@ -1346,10 +1354,10 @@
.port = {
.membase = (void *)0xffe80000,
.mapbase = 0xffe80000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 43,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCIF,
@@ -1359,10 +1367,10 @@
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
{
.port = {
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 42,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
@@ -1374,10 +1382,10 @@
.port = {
.membase = (void *)0x00ffffb0,
.mapbase = 0x00ffffb0,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 54,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCI,
@@ -1388,10 +1396,10 @@
.port = {
.membase = (void *)0x00ffffb8,
.mapbase = 0x00ffffb8,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 58,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCI,
@@ -1402,10 +1410,10 @@
.port = {
.membase = (void *)0x00ffffc0,
.mapbase = 0x00ffffc0,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 62,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 2,
},
.type = PORT_SCI,
@@ -1417,10 +1425,10 @@
.port = {
.membase = (void *)0x00ffff78,
.mapbase = 0x00ffff78,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 90,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCI,
@@ -1431,10 +1439,10 @@
.port = {
.membase = (void *)0x00ffff80,
.mapbase = 0x00ffff80,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 94,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCI,
@@ -1445,16 +1453,88 @@
.port = {
.membase = (void *)0x00ffff88,
.mapbase = 0x00ffff88,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 98,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 2,
},
.type = PORT_SCI,
.irqs = H8S_SCI_IRQS2,
.init_pins = sci_init_pins_sci,
},
+#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
+ {
+ .port = {
+ .membase = (void *)0xff923000,
+ .mapbase = 0xff923000,
+ .iotype = UPIO_MEM,
+ .irq = 61,
+ .ops = &sci_uart_ops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7770_SCIF0_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)0xff924000,
+ .mapbase = 0xff924000,
+ .iotype = UPIO_MEM,
+ .irq = 62,
+ .ops = &sci_uart_ops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7770_SCIF1_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)0xff925000,
+ .mapbase = 0xff925000,
+ .iotype = UPIO_MEM,
+ .irq = 63,
+ .ops = &sci_uart_ops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 2,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7770_SCIF2_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+ {
+ .port = {
+ .membase = (void *)0xffe00000,
+ .mapbase = 0xffe00000,
+ .iotype = UPIO_MEM,
+ .irq = 43,
+ .ops = &sci_uart_ops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7780_SCIF0_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)0xffe10000,
+ .mapbase = 0xffe10000,
+ .iotype = UPIO_MEM,
+ .irq = 79,
+ .ops = &sci_uart_ops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7780_SCIF1_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
#else
#error "CPU subtype not defined"
#endif
@@ -1480,9 +1560,6 @@
int flow = 'n';
int ret;
- if (co->index >= SCI_NPORTS)
- co->index = 0;
-
serial_console_port = &sci_ports[co->index];
port = &serial_console_port->port;
port->type = serial_console_port->type;
@@ -1496,14 +1573,21 @@
* We need to set the initial uartclk here, since otherwise it will
* only ever be setup at sci_init() time.
*/
-#if !defined(__H8300H__) && !defined(__H8300S__)
- port->uartclk = current_cpu_data.module_clock * 16;
-#else
+#if defined(__H8300H__) || defined(__H8300S__)
port->uartclk = CONFIG_CPU_CLOCK;
-#endif
+
#if defined(__H8300S__)
h8300_sci_enable(port, sci_enable);
#endif
+#elif defined(CONFIG_SUPERH64)
+ port->uartclk = current_cpu_info.module_clock * 16;
+#else
+ {
+ struct clk *clk = clk_get("module_clk");
+ port->uartclk = clk_get_rate(clk) * 16;
+ clk_put(clk);
+ }
+#endif
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1566,7 +1650,7 @@
int parity = 'n';
int flow = 'n';
- if (co->index >= SCI_NPORTS || co->index != kgdb_portnum)
+ if (co->index != kgdb_portnum)
co->index = kgdb_portnum;
if (options)
@@ -1606,7 +1690,7 @@
#elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
#define SCI_CONSOLE &serial_console
#else
-#define SCI_CONSOLE 0
+#define SCI_CONSOLE 0
#endif
static char banner[] __initdata =
@@ -1621,7 +1705,6 @@
.dev_name = "ttySC",
.major = SCI_MAJOR,
.minor = SCI_MINOR_START,
- .nr = SCI_NPORTS,
.cons = SCI_CONSOLE,
};
@@ -1631,15 +1714,21 @@
printk("%s", banner);
+ sci_uart_driver.nr = ARRAY_SIZE(sci_ports);
+
ret = uart_register_driver(&sci_uart_driver);
if (ret == 0) {
for (chan = 0; chan < SCI_NPORTS; chan++) {
struct sci_port *sciport = &sci_ports[chan];
-#if !defined(__H8300H__) && !defined(__H8300S__)
- sciport->port.uartclk = (current_cpu_data.module_clock * 16);
-#else
+#if defined(__H8300H__) || defined(__H8300S__)
sciport->port.uartclk = CONFIG_CPU_CLOCK;
+#elif defined(CONFIG_SUPERH64)
+ sciport->port.uartclk = current_cpu_info.module_clock * 16;
+#else
+ struct clk *clk = clk_get("module_clk");
+ sciport->port.uartclk = clk_get_rate(clk) * 16;
+ clk_put(clk);
#endif
uart_add_one_port(&sci_uart_driver, &sciport->port);
sciport->break_timer.data = (unsigned long)sciport;
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 2892169..1f14bb4 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -46,14 +46,17 @@
#define H8S_SCI_IRQS1 {92, 93, 94, 0 }
#define H8S_SCI_IRQS2 {96, 97, 98, 0 }
#define SH5_SCIF_IRQS {39, 40, 42, 0 }
+#define SH7770_SCIF0_IRQS {61, 61, 61, 61 }
+#define SH7770_SCIF1_IRQS {62, 62, 62, 62 }
+#define SH7770_SCIF2_IRQS {63, 63, 63, 63 }
+#define SH7780_SCIF0_IRQS {40, 41, 43, 42 }
+#define SH7780_SCIF1_IRQS {76, 77, 79, 78 }
#if defined(CONFIG_CPU_SUBTYPE_SH7708)
-# define SCI_NPORTS 1
# define SCSPTR 0xffffff7c /* 8 bit */
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
# define SCI_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-# define SCI_NPORTS 3
# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */
# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
@@ -61,9 +64,8 @@
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
# define SCIF0 0xA4400000
# define SCIF2 0xA4410000
-# define SCSMR_Ir 0xA44A0000
-# define IRDA_SCIF SCIF0
-# define SCI_NPORTS 2
+# define SCSMR_Ir 0xA44A0000
+# define IRDA_SCIF SCIF0
# define SCPCR 0xA4000116
# define SCPDR 0xA4000136
@@ -74,14 +76,11 @@
# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
# define SCIF_ONLY
#elif defined(CONFIG_SH_RTS7751R2D)
-# define SCI_NPORTS 1
-# define SCSPTR1 0xffe0001c /* 8 bit SCI */
# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
-# define SCI_NPORTS 2
# define SCSPTR1 0xffe0001c /* 8 bit SCI */
# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
@@ -90,34 +89,29 @@
0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
# define SCI_AND_SCIF
#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
-# define SCI_NPORTS 3
-# define SCSPTR0 0xfe600000 /* 16 bit SCIF */
-# define SCSPTR1 0xfe610000 /* 16 bit SCIF */
-# define SCSPTR2 0xfe620000 /* 16 bit SCIF */
+# define SCSPTR0 0xfe600024 /* 16 bit SCIF */
+# define SCSPTR1 0xfe610024 /* 16 bit SCIF */
+# define SCSPTR2 0xfe620024 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
-# define SCI_NPORTS 1
# define SCPCR 0xA4050116 /* 16 bit SCIF */
# define SCPDR 0xA4050136 /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
-# define SCI_NPORTS 1
# define SCPDR 0xA4050138 /* 16 bit SCIF */
# define SCSPTR2 SCPDR
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
-# define SCI_NPORTS 1
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
-# define SCI_NPORTS 2
# define SCSPTR1 0xffe00020 /* 16 bit SCIF */
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
@@ -129,26 +123,32 @@
# define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
# define SCIF_PTR2_OFFS 0x0000020
# define SCIF_LSR2_OFFS 0x0000024
-# define SCI_NPORTS 1
-# define SCI_INIT { \
- { {}, PORT_SCIF, 0, \
- SH5_SCIF_IRQS, sci_init_pins_scif } \
-}
# define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
# define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,
TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
-# define SCI_NPORTS 3
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
# define SCI_ONLY
# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
#elif defined(CONFIG_H8S2678)
-# define SCI_NPORTS 3
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
# define SCI_ONLY
# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
+# define SCSPTR0 0xff923020 /* 16 bit SCIF */
+# define SCSPTR1 0xff924020 /* 16 bit SCIF */
+# define SCSPTR2 0xff925020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001 /* overrun error bit */
+# define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
+# define SCSPTR1 0xffe10024 /* 16 bit SCIF */
+# define SCIF_OPER 0x0001 /* Overrun error bit */
+# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
#else
# error CPU subtype not defined
#endif
@@ -158,7 +158,7 @@
#define SCI_CTRL_FLAGS_RIE 0x40 /* all */
#define SCI_CTRL_FLAGS_TE 0x20 /* all */
#define SCI_CTRL_FLAGS_RE 0x10 /* all */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
+#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7780)
#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
#else
#define SCI_CTRL_FLAGS_REIE 0
@@ -213,7 +213,7 @@
# define SCxSR_RDxF_CLEAR(port) 0xbc
# define SCxSR_ERROR_CLEAR(port) 0xc4
# define SCxSR_TDxE_CLEAR(port) 0x78
-# define SCxSR_BREAK_CLEAR(port) 0xc4
+# define SCxSR_BREAK_CLEAR(port) 0xc4
#elif defined(SCIF_ONLY)
# define SCxSR_TEND(port) SCIF_TEND
# define SCxSR_ERRORS(port) SCIF_ERRORS
@@ -237,7 +237,7 @@
# define SCxSR_RDxF_CLEAR(port) 0x00fc
# define SCxSR_ERROR_CLEAR(port) 0x0073
# define SCxSR_TDxE_CLEAR(port) 0x00df
-# define SCxSR_BREAK_CLEAR(port) 0x00e3
+# define SCxSR_BREAK_CLEAR(port) 0x00e3
#endif
#else
# define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
@@ -285,14 +285,14 @@
#define SCI_IN(size, offset) \
unsigned int addr = port->mapbase + (offset); \
- if ((size) == 8) { \
+ if ((size) == 8) { \
return ctrl_inb(addr); \
- } else { \
+ } else { \
return ctrl_inw(addr); \
}
#define SCI_OUT(size, offset, value) \
unsigned int addr = port->mapbase + (offset); \
- if ((size) == 8) { \
+ if ((size) == 8) { \
ctrl_outb(value, addr); \
} else { \
ctrl_outw(value, addr); \
@@ -301,10 +301,10 @@
#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
static inline unsigned int sci_##name##_in(struct uart_port *port) \
{ \
- if (port->type == PORT_SCI) { \
+ if (port->type == PORT_SCI) { \
SCI_IN(sci_size, sci_offset) \
} else { \
- SCI_IN(scif_size, scif_offset); \
+ SCI_IN(scif_size, scif_offset); \
} \
} \
static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
@@ -319,7 +319,7 @@
#define CPU_SCIF_FNS(name, scif_offset, scif_size) \
static inline unsigned int sci_##name##_in(struct uart_port *port) \
{ \
- SCI_IN(scif_size, scif_offset); \
+ SCI_IN(scif_size, scif_offset); \
} \
static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
{ \
@@ -329,7 +329,7 @@
#define CPU_SCI_FNS(name, sci_offset, sci_size) \
static inline unsigned int sci_##name##_in(struct uart_port* port) \
{ \
- SCI_IN(sci_size, sci_offset); \
+ SCI_IN(sci_size, sci_offset); \
} \
static inline void sci_##name##_out(struct uart_port* port, unsigned int value) \
{ \
@@ -385,10 +385,17 @@
SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8)
SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8)
SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16)
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16)
+SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16)
+SCIF_FNS(SCSPTR, 0, 0, 0x24, 16)
+SCIF_FNS(SCLSR, 0, 0, 0x28, 16)
+#else
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCSPTR, 0, 0, 0x20, 16)
SCIF_FNS(SCLSR, 0, 0, 0x24, 16)
#endif
+#endif
#define sci_in(port, reg) sci_##reg##_in(port)
#define sci_out(port, reg, value) sci_##reg##_out(port, value)
@@ -518,6 +525,24 @@
int ch = (port->mapbase - SMR0) >> 3;
return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0;
}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xff923000)
+ return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xff924000)
+ return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xff925000)
+ return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xffe00000)
+ return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xffe10000)
+ return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+}
#endif
/*
@@ -552,22 +577,15 @@
* -- Mitch Davis - 15 Jul 2000
*/
-#define PCLK (current_cpu_data.module_clock)
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-#define SCBRR_VALUE(bps) ((PCLK+16*bps)/(16*bps)-1)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define SCBRR_VALUE(bps) (((PCLK*2)+16*bps)/(32*bps)-1)
-#elif !defined(__H8300H__) && !defined(__H8300S__)
-#define SCBRR_VALUE(bps) ((PCLK+16*bps)/(32*bps)-1)
-#else
+#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
+#elif defined(__H8300H__) || defined(__H8300S__)
#define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)
+#elif defined(CONFIG_SUPERH64)
+#define SCBRR_VALUE(bps) ((current_cpu_data.module_clock+16*bps)/(32*bps)-1)
+#else /* Generic SH */
+#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
#endif
-#define BPS_2400 SCBRR_VALUE(2400)
-#define BPS_4800 SCBRR_VALUE(4800)
-#define BPS_9600 SCBRR_VALUE(9600)
-#define BPS_19200 SCBRR_VALUE(19200)
-#define BPS_38400 SCBRR_VALUE(38400)
-#define BPS_57600 SCBRR_VALUE(57600)
-#define BPS_115200 SCBRR_VALUE(115200)
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 8bcaebc..8566422 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -1036,7 +1036,7 @@
up->port.irq = edev->irqs[0];
up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
up->port.mapbase = (unsigned long)up->regs;
- up->port.iotype = SERIAL_IO_MEM;
+ up->port.iotype = UPIO_MEM;
writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc);
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 9a3665b..3087045 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -109,11 +109,11 @@
offset <<= up->port.regshift;
switch (up->port.iotype) {
- case SERIAL_IO_HUB6:
+ case UPIO_HUB6:
outb(up->port.hub6 - 1 + offset, up->port.iobase);
return inb(up->port.iobase + 1);
- case SERIAL_IO_MEM:
+ case UPIO_MEM:
return readb(up->port.membase + offset);
default:
@@ -139,12 +139,12 @@
offset <<= up->port.regshift;
switch (up->port.iotype) {
- case SERIAL_IO_HUB6:
+ case UPIO_HUB6:
outb(up->port.hub6 - 1 + offset, up->port.iobase);
outb(value, up->port.iobase + 1);
break;
- case SERIAL_IO_MEM:
+ case UPIO_MEM:
writeb(value, up->port.membase + offset);
break;
@@ -669,7 +669,7 @@
* if it is, then bail out, because there's likely no UART
* here.
*/
- if (!(up->port.flags & ASYNC_BUGGY_UART) &&
+ if (!(up->port.flags & UPF_BUGGY_UART) &&
(serial_inp(up, UART_LSR) == 0xff)) {
printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
return -ENODEV;
@@ -707,7 +707,7 @@
up->ier = UART_IER_RLSI | UART_IER_RDI;
serial_outp(up, UART_IER, up->ier);
- if (up->port.flags & ASYNC_FOURPORT) {
+ if (up->port.flags & UPF_FOURPORT) {
unsigned int icp;
/*
* Enable interrupts on the AST Fourport board
@@ -740,7 +740,7 @@
serial_outp(up, UART_IER, 0);
spin_lock_irqsave(&up->port.lock, flags);
- if (up->port.flags & ASYNC_FOURPORT) {
+ if (up->port.flags & UPF_FOURPORT) {
/* reset interrupts on the AST Fourport board */
inb((up->port.iobase & 0xfe0) | 0x1f);
up->port.mctrl |= TIOCM_OUT1;
@@ -1052,7 +1052,7 @@
return;
up->type_probed = PORT_UNKNOWN;
- up->port.iotype = SERIAL_IO_MEM;
+ up->port.iotype = UPIO_MEM;
/*
* First we look for Ebus-bases su's
@@ -1132,7 +1132,7 @@
spin_lock_irqsave(&up->port.lock, flags);
- if (!(up->port.flags & ASYNC_BUGGY_UART)) {
+ if (!(up->port.flags & UPF_BUGGY_UART)) {
/*
* Do a simple existence test first; if we fail this, there's
* no point trying anything else.
@@ -1170,7 +1170,7 @@
* manufacturer would be stupid enough to design a board
* that conflicts with COM 1-4 --- we hope!
*/
- if (!(up->port.flags & ASYNC_SKIP_TEST)) {
+ if (!(up->port.flags & UPF_SKIP_TEST)) {
serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
status1 = serial_inp(up, UART_MSR) & 0xF0;
serial_outp(up, UART_MCR, save_mcr);
@@ -1371,7 +1371,7 @@
} while ((status & BOTH_EMPTY) != BOTH_EMPTY);
/* Wait up to 1s for flow control if necessary */
- if (up->port.flags & ASYNC_CONS_FLOW) {
+ if (up->port.flags & UPF_CONS_FLOW) {
tmout = 1000000;
while (--tmout &&
((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
@@ -1513,7 +1513,7 @@
up->su_type == SU_PORT_KBD)
continue;
- up->port.flags |= ASYNC_BOOT_AUTOCONF;
+ up->port.flags |= UPF_BOOT_AUTOCONF;
up->port.type = PORT_UNKNOWN;
up->port.uartclk = (SU_BASE_BAUD * 16);
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 3c72484..5cc4d4c 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1487,7 +1487,7 @@
up[(chip * 2) + 1].port.membase = (void __iomem *)&rp->channelB;
/* Channel A */
- up[(chip * 2) + 0].port.iotype = SERIAL_IO_MEM;
+ up[(chip * 2) + 0].port.iotype = UPIO_MEM;
up[(chip * 2) + 0].port.irq = zilog_irq;
up[(chip * 2) + 0].port.uartclk = ZS_CLOCK;
up[(chip * 2) + 0].port.fifosize = 1;
@@ -1498,7 +1498,7 @@
up[(chip * 2) + 0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
/* Channel B */
- up[(chip * 2) + 1].port.iotype = SERIAL_IO_MEM;
+ up[(chip * 2) + 1].port.iotype = UPIO_MEM;
up[(chip * 2) + 1].port.irq = zilog_irq;
up[(chip * 2) + 1].port.uartclk = ZS_CLOCK;
up[(chip * 2) + 1].port.fifosize = 1;
diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c
index 9378895..df705fd 100644
--- a/drivers/serial/v850e_uart.c
+++ b/drivers/serial/v850e_uart.c
@@ -496,7 +496,7 @@
port->ops = &v850e_uart_ops;
port->line = chan;
- port->iotype = SERIAL_IO_MEM;
+ port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF;
/* We actually use multiple IRQs, but the serial
diff --git a/drivers/sn/ioc3.c b/drivers/sn/ioc3.c
index aaa009f..12357e1 100644
--- a/drivers/sn/ioc3.c
+++ b/drivers/sn/ioc3.c
@@ -38,10 +38,10 @@
static int nic_wait(struct ioc3_driver_data *idd)
{
- volatile unsigned mcr;
+ unsigned mcr;
do {
- mcr = (volatile unsigned)idd->vma->mcr;
+ mcr = readl(&idd->vma->mcr);
} while (!(mcr & 2));
return mcr & 1;
@@ -53,7 +53,7 @@
unsigned long flags;
local_irq_save(flags);
- idd->vma->mcr = mcr_pack(500, 65);
+ writel(mcr_pack(500, 65), &idd->vma->mcr);
presence = nic_wait(idd);
local_irq_restore(flags);
@@ -68,7 +68,7 @@
unsigned long flags;
local_irq_save(flags);
- idd->vma->mcr = mcr_pack(6, 13);
+ writel(mcr_pack(6, 13), &idd->vma->mcr);
result = nic_wait(idd);
local_irq_restore(flags);
@@ -80,9 +80,9 @@
static inline void nic_write_bit(struct ioc3_driver_data *idd, int bit)
{
if (bit)
- idd->vma->mcr = mcr_pack(6, 110);
+ writel(mcr_pack(6, 110), &idd->vma->mcr);
else
- idd->vma->mcr = mcr_pack(80, 30);
+ writel(mcr_pack(80, 30), &idd->vma->mcr);
nic_wait(idd);
}
@@ -337,7 +337,7 @@
int save = 0, loops = 3;
unsigned long first, addr;
- idd->vma->gpcr_s = GPCR_MLAN_EN;
+ writel(GPCR_MLAN_EN, &idd->vma->gpcr_s);
while(loops>0) {
idd->nic_part[0] = 0;
@@ -408,7 +408,7 @@
read_lock_irqsave(&ioc3_submodules_lock, flags);
- if(idd->dual_irq && idd->vma->eisr) {
+ if(idd->dual_irq && readb(&idd->vma->eisr)) {
/* send Ethernet IRQ to the driver */
if(ioc3_ethernet && idd->active[ioc3_ethernet->id] &&
ioc3_ethernet->intr) {
@@ -682,7 +682,7 @@
idd->id = ioc3_counter++;
up_write(&ioc3_devices_rwsem);
- idd->gpdr_shadow = idd->vma->gpdr;
+ idd->gpdr_shadow = readl(&idd->vma->gpdr);
/* Read IOC3 NIC contents */
probe_nic(idd);
@@ -843,9 +843,9 @@
MODULE_DESCRIPTION("PCI driver for SGI IOC3");
MODULE_LICENSE("GPL");
-EXPORT_SYMBOL(ioc3_register_submodule);
-EXPORT_SYMBOL(ioc3_unregister_submodule);
-EXPORT_SYMBOL(ioc3_ack);
-EXPORT_SYMBOL(ioc3_gpcr_set);
-EXPORT_SYMBOL(ioc3_disable);
-EXPORT_SYMBOL(ioc3_enable);
+EXPORT_SYMBOL_GPL(ioc3_register_submodule);
+EXPORT_SYMBOL_GPL(ioc3_unregister_submodule);
+EXPORT_SYMBOL_GPL(ioc3_ack);
+EXPORT_SYMBOL_GPL(ioc3_gpcr_set);
+EXPORT_SYMBOL_GPL(ioc3_disable);
+EXPORT_SYMBOL_GPL(ioc3_enable);
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index b77dbd6..7a75fae 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -75,16 +75,6 @@
inexpensive battery powered microcontroller evaluation board.
This same cable can be used to flash new firmware.
-config SPI_BUTTERFLY
- tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)"
- depends on SPI_MASTER && PARPORT && EXPERIMENTAL
- select SPI_BITBANG
- help
- This uses a custom parallel port cable to connect to an AVR
- Butterfly <http://www.atmel.com/products/avr/butterfly>, an
- inexpensive battery powered microcontroller evaluation board.
- This same cable can be used to flash new firmware.
-
#
# Add new SPI master controllers in alphabetical order above this line
#
diff --git a/drivers/spi/spi_butterfly.c b/drivers/spi/spi_butterfly.c
index 79a3c59..ff9e5fa 100644
--- a/drivers/spi/spi_butterfly.c
+++ b/drivers/spi/spi_butterfly.c
@@ -163,21 +163,20 @@
struct butterfly *pp = spidev_to_pp(spi);
/* set default clock polarity */
- if (value)
+ if (value != BITBANG_CS_INACTIVE)
setsck(spi, spi->mode & SPI_CPOL);
/* no chipselect on this USI link config */
if (is_usidev(spi))
return;
- /* here, value == "activate or not" */
-
- /* most PARPORT_CONTROL_* bits are negated */
+ /* here, value == "activate or not";
+ * most PARPORT_CONTROL_* bits are negated, so we must
+ * morph it to value == "bit value to write in control register"
+ */
if (spi_cs_bit == PARPORT_CONTROL_INIT)
value = !value;
- /* here, value == "bit value to write in control register" */
-
parport_frob_control(pp->port, spi_cs_bit, value ? spi_cs_bit : 0);
}
@@ -202,7 +201,9 @@
/* override default partitioning with cmdlinepart */
static struct mtd_partition partitions[] = { {
- /* JFFS2 wants partitions of 4*N blocks for this device ... */
+ /* JFFS2 wants partitions of 4*N blocks for this device,
+ * so sectors 0 and 1 can't be partitions by themselves.
+ */
/* sector 0 = 8 pages * 264 bytes/page (1 block)
* sector 1 = 248 pages * 264 bytes/page
@@ -316,8 +317,9 @@
if (status < 0)
goto clean2;
- /* Bus 1 lets us talk to at45db041b (firmware disables AVR)
- * or AVR (firmware resets at45, acts as spi slave)
+ /* Bus 1 lets us talk to at45db041b (firmware disables AVR SPI), AVR
+ * (firmware resets at45, acts as spi slave) or neither (we ignore
+ * both, AVR uses AT45). Here we expect firmware for the first option.
*/
pp->info[0].max_speed_hz = 15 * 1000 * 1000;
strcpy(pp->info[0].modalias, "mtd_dataflash");
@@ -330,7 +332,9 @@
pp->dataflash->dev.bus_id);
#ifdef HAVE_USI
- /* even more custom AVR firmware */
+ /* Bus 2 is only for talking to the AVR, and it can work no
+ * matter who masters bus 1; needs appropriate AVR firmware.
+ */
pp->info[1].max_speed_hz = 10 /* ?? */ * 1000 * 1000;
strcpy(pp->info[1].modalias, "butterfly");
// pp->info[1].platform_data = ... TBD ... ;
@@ -378,13 +382,8 @@
pp = butterfly;
butterfly = NULL;
-#ifdef HAVE_USI
- spi_unregister_device(pp->butterfly);
- pp->butterfly = NULL;
-#endif
- spi_unregister_device(pp->dataflash);
- pp->dataflash = NULL;
-
+ /* stop() unregisters child devices too */
+ pdev = to_platform_device(pp->bitbang.master->cdev.dev);
status = spi_bitbang_stop(&pp->bitbang);
/* turn off VCC */
@@ -394,8 +393,6 @@
parport_release(pp->pd);
parport_unregister_device(pp->pd);
- pdev = to_platform_device(pp->bitbang.master->cdev.dev);
-
(void) spi_master_put(pp->bitbang.master);
platform_device_unregister(pdev);
@@ -420,4 +417,5 @@
}
module_exit(butterfly_exit);
+MODULE_DESCRIPTION("Parport Adapter driver for AVR Butterfly");
MODULE_LICENSE("GPL");
diff --git a/drivers/tc/tc.c b/drivers/tc/tc.c
index a0e5af6..4a51e56 100644
--- a/drivers/tc/tc.c
+++ b/drivers/tc/tc.c
@@ -17,7 +17,6 @@
#include <linux/types.h>
#include <asm/addrspace.h>
-#include <asm/bug.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/paccess.h>
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index f670468..5578a9d 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -3558,10 +3558,16 @@
}
/* Add word 0 to G.729 frames for the 8021. Right now we don't do VAD/CNG */
if (j->play_codec == G729 && (cnt == 0 || cnt == 10 || cnt == 20)) {
- if(j->write_buffer_rp + cnt == 0 && j->write_buffer_rp + cnt + 1 == 0 && j->write_buffer_rp + cnt + 2 == 0 &&
- j->write_buffer_rp + cnt + 3 == 0 && j->write_buffer_rp + cnt + 4 == 0 && j->write_buffer_rp + cnt + 5 == 0 &&
- j->write_buffer_rp + cnt + 6 == 0 && j->write_buffer_rp + cnt + 7 == 0 && j->write_buffer_rp + cnt + 8 == 0 &&
- j->write_buffer_rp + cnt + 9 == 0) {
+ if (j->write_buffer_rp[cnt] == 0 &&
+ j->write_buffer_rp[cnt + 1] == 0 &&
+ j->write_buffer_rp[cnt + 2] == 0 &&
+ j->write_buffer_rp[cnt + 3] == 0 &&
+ j->write_buffer_rp[cnt + 4] == 0 &&
+ j->write_buffer_rp[cnt + 5] == 0 &&
+ j->write_buffer_rp[cnt + 6] == 0 &&
+ j->write_buffer_rp[cnt + 7] == 0 &&
+ j->write_buffer_rp[cnt + 8] == 0 &&
+ j->write_buffer_rp[cnt + 9] == 0) {
/* someone is trying to write silence lets make this a type 0 frame. */
outb_p(0x00, j->DSPbase + 0x0C);
outb_p(0x00, j->DSPbase + 0x0D);
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 3639c3f..36e476d 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -38,6 +38,7 @@
obj-$(CONFIG_USB_DABUSB) += media/
obj-$(CONFIG_USB_DSBR) += media/
+obj-$(CONFIG_USB_ET61X251) += media/
obj-$(CONFIG_USB_IBMCAM) += media/
obj-$(CONFIG_USB_KONICAWC) += media/
obj-$(CONFIG_USB_OV511) += media/
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index af0a41e..04631dc 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -36,6 +36,7 @@
#include <linux/init.h>
#include <linux/device.h> /* FIXME: linux/firmware.h should include it itself */
#include <linux/firmware.h>
+#include <linux/mutex.h>
#include "usbatm.h"
@@ -160,7 +161,7 @@
struct work_struct poll_work;
/* contol handles */
- struct semaphore cm_serialize;
+ struct mutex cm_serialize;
u8 *rcv_buf;
u8 *snd_buf;
struct urb *rcv_urb;
@@ -219,7 +220,7 @@
goto fail;
}
- down(&instance->cm_serialize);
+ mutex_lock(&instance->cm_serialize);
/* submit reading urb before the writing one */
init_completion(&instance->rcv_done);
@@ -288,7 +289,7 @@
ret = offd;
dbg("cm %#x", cm);
fail:
- up(&instance->cm_serialize);
+ mutex_unlock(&instance->cm_serialize);
return ret;
}
@@ -352,7 +353,6 @@
struct atm_dev *atm_dev)
{
struct cxacru_data *instance = usbatm_instance->driver_data;
- struct device *dev = &usbatm_instance->usb_intf->dev;
/*
struct atm_dev *atm_dev = usbatm_instance->atm_dev;
*/
@@ -364,14 +364,14 @@
ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_MAC_ADDRESS, NULL, 0,
atm_dev->esi, sizeof(atm_dev->esi));
if (ret < 0) {
- dev_err(dev, "cxacru_atm_start: CARD_GET_MAC_ADDRESS returned %d\n", ret);
+ atm_err(usbatm_instance, "cxacru_atm_start: CARD_GET_MAC_ADDRESS returned %d\n", ret);
return ret;
}
/* start ADSL */
ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
if (ret < 0) {
- dev_err(dev, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret);
+ atm_err(usbatm_instance, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret);
return ret;
}
@@ -383,13 +383,13 @@
static void cxacru_poll_status(struct cxacru_data *instance)
{
u32 buf[CXINF_MAX] = {};
- struct device *dev = &instance->usbatm->usb_intf->dev;
- struct atm_dev *atm_dev = instance->usbatm->atm_dev;
+ struct usbatm_data *usbatm = instance->usbatm;
+ struct atm_dev *atm_dev = usbatm->atm_dev;
int ret;
ret = cxacru_cm_get_array(instance, CM_REQUEST_CARD_INFO_GET, buf, CXINF_MAX);
if (ret < 0) {
- dev_warn(dev, "poll status: error %d\n", ret);
+ atm_warn(usbatm, "poll status: error %d\n", ret);
goto reschedule;
}
@@ -400,50 +400,50 @@
switch (instance->line_status) {
case 0:
atm_dev->signal = ATM_PHY_SIG_LOST;
- dev_info(dev, "ADSL line: down\n");
+ atm_info(usbatm, "ADSL line: down\n");
break;
case 1:
atm_dev->signal = ATM_PHY_SIG_LOST;
- dev_info(dev, "ADSL line: attemtping to activate\n");
+ atm_info(usbatm, "ADSL line: attempting to activate\n");
break;
case 2:
atm_dev->signal = ATM_PHY_SIG_LOST;
- dev_info(dev, "ADSL line: training\n");
+ atm_info(usbatm, "ADSL line: training\n");
break;
case 3:
atm_dev->signal = ATM_PHY_SIG_LOST;
- dev_info(dev, "ADSL line: channel analysis\n");
+ atm_info(usbatm, "ADSL line: channel analysis\n");
break;
case 4:
atm_dev->signal = ATM_PHY_SIG_LOST;
- dev_info(dev, "ADSL line: exchange\n");
+ atm_info(usbatm, "ADSL line: exchange\n");
break;
case 5:
atm_dev->link_rate = buf[CXINF_DOWNSTREAM_RATE] * 1000 / 424;
atm_dev->signal = ATM_PHY_SIG_FOUND;
- dev_info(dev, "ADSL line: up (%d kb/s down | %d kb/s up)\n",
+ atm_info(usbatm, "ADSL line: up (%d kb/s down | %d kb/s up)\n",
buf[CXINF_DOWNSTREAM_RATE], buf[CXINF_UPSTREAM_RATE]);
break;
case 6:
atm_dev->signal = ATM_PHY_SIG_LOST;
- dev_info(dev, "ADSL line: waiting\n");
+ atm_info(usbatm, "ADSL line: waiting\n");
break;
case 7:
atm_dev->signal = ATM_PHY_SIG_LOST;
- dev_info(dev, "ADSL line: initializing\n");
+ atm_info(usbatm, "ADSL line: initializing\n");
break;
default:
atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
- dev_info(dev, "Unknown line state %02x\n", instance->line_status);
+ atm_info(usbatm, "Unknown line state %02x\n", instance->line_status);
break;
}
reschedule:
@@ -504,8 +504,8 @@
{
int ret;
int off;
- struct usb_device *usb_dev = instance->usbatm->usb_dev;
- struct device *dev = &instance->usbatm->usb_intf->dev;
+ struct usbatm_data *usbatm = instance->usbatm;
+ struct usb_device *usb_dev = usbatm->usb_dev;
u16 signature[] = { usb_dev->descriptor.idVendor, usb_dev->descriptor.idProduct };
u32 val;
@@ -515,7 +515,7 @@
val = cpu_to_le32(instance->modem_type->pll_f_clk);
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLFCLK_ADDR, (u8 *) &val, 4);
if (ret) {
- dev_err(dev, "FirmwarePllFClkValue failed: %d\n", ret);
+ usb_err(usbatm, "FirmwarePllFClkValue failed: %d\n", ret);
return;
}
@@ -523,7 +523,7 @@
val = cpu_to_le32(instance->modem_type->pll_b_clk);
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLBCLK_ADDR, (u8 *) &val, 4);
if (ret) {
- dev_err(dev, "FirmwarePllBClkValue failed: %d\n", ret);
+ usb_err(usbatm, "FirmwarePllBClkValue failed: %d\n", ret);
return;
}
@@ -531,14 +531,14 @@
val = cpu_to_le32(SDRAM_ENA);
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SDRAMEN_ADDR, (u8 *) &val, 4);
if (ret) {
- dev_err(dev, "Enable SDRAM failed: %d\n", ret);
+ usb_err(usbatm, "Enable SDRAM failed: %d\n", ret);
return;
}
/* Firmware */
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, FW_ADDR, fw->data, fw->size);
if (ret) {
- dev_err(dev, "Firmware upload failed: %d\n", ret);
+ usb_err(usbatm, "Firmware upload failed: %d\n", ret);
return;
}
@@ -546,7 +546,7 @@
if (instance->modem_type->boot_rom_patch) {
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_ADDR, bp->data, bp->size);
if (ret) {
- dev_err(dev, "Boot ROM patching failed: %d\n", ret);
+ usb_err(usbatm, "Boot ROM patching failed: %d\n", ret);
return;
}
}
@@ -554,7 +554,7 @@
/* Signature */
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SIG_ADDR, (u8 *) signature, 4);
if (ret) {
- dev_err(dev, "Signature storing failed: %d\n", ret);
+ usb_err(usbatm, "Signature storing failed: %d\n", ret);
return;
}
@@ -566,7 +566,7 @@
ret = cxacru_fw(usb_dev, FW_GOTO_MEM, 0x0, 0x0, FW_ADDR, NULL, 0);
}
if (ret) {
- dev_err(dev, "Passing control to firmware failed: %d\n", ret);
+ usb_err(usbatm, "Passing control to firmware failed: %d\n", ret);
return;
}
@@ -580,7 +580,7 @@
ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0);
if (ret < 0) {
- dev_err(dev, "modem failed to initialize: %d\n", ret);
+ usb_err(usbatm, "modem failed to initialize: %d\n", ret);
return;
}
@@ -597,7 +597,7 @@
ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET,
(u8 *) buf, len, NULL, 0);
if (ret < 0) {
- dev_err(dev, "load config data failed: %d\n", ret);
+ usb_err(usbatm, "load config data failed: %d\n", ret);
return;
}
}
@@ -608,18 +608,19 @@
static int cxacru_find_firmware(struct cxacru_data *instance,
char* phase, const struct firmware **fw_p)
{
- struct device *dev = &instance->usbatm->usb_intf->dev;
+ struct usbatm_data *usbatm = instance->usbatm;
+ struct device *dev = &usbatm->usb_intf->dev;
char buf[16];
sprintf(buf, "cxacru-%s.bin", phase);
dbg("cxacru_find_firmware: looking for %s", buf);
if (request_firmware(fw_p, buf, dev)) {
- dev_dbg(dev, "no stage %s firmware found\n", phase);
+ usb_dbg(usbatm, "no stage %s firmware found\n", phase);
return -ENOENT;
}
- dev_info(dev, "found firmware %s\n", buf);
+ usb_info(usbatm, "found firmware %s\n", buf);
return 0;
}
@@ -627,20 +628,19 @@
static int cxacru_heavy_init(struct usbatm_data *usbatm_instance,
struct usb_interface *usb_intf)
{
- struct device *dev = &usbatm_instance->usb_intf->dev;
const struct firmware *fw, *bp, *cf;
struct cxacru_data *instance = usbatm_instance->driver_data;
int ret = cxacru_find_firmware(instance, "fw", &fw);
if (ret) {
- dev_warn(dev, "firmware (cxacru-fw.bin) unavailable (hotplug misconfiguration?)\n");
+ usb_warn(usbatm_instance, "firmware (cxacru-fw.bin) unavailable (system misconfigured?)\n");
return ret;
}
if (instance->modem_type->boot_rom_patch) {
ret = cxacru_find_firmware(instance, "bp", &bp);
if (ret) {
- dev_warn(dev, "boot ROM patch (cxacru-bp.bin) unavailable (hotplug misconfiguration?)\n");
+ usb_warn(usbatm_instance, "boot ROM patch (cxacru-bp.bin) unavailable (system misconfigured?)\n");
release_firmware(fw);
return ret;
}
@@ -667,22 +667,19 @@
}
static int cxacru_bind(struct usbatm_data *usbatm_instance,
- struct usb_interface *intf, const struct usb_device_id *id,
- int *need_heavy_init)
+ struct usb_interface *intf, const struct usb_device_id *id)
{
struct cxacru_data *instance;
struct usb_device *usb_dev = interface_to_usbdev(intf);
int ret;
/* instance init */
- instance = kmalloc(sizeof(*instance), GFP_KERNEL);
+ instance = kzalloc(sizeof(*instance), GFP_KERNEL);
if (!instance) {
dbg("cxacru_bind: no memory for instance data");
return -ENOMEM;
}
- memset(instance, 0, sizeof(*instance));
-
instance->usbatm = usbatm_instance;
instance->modem_type = (struct cxacru_modem_type *) id->driver_info;
@@ -721,13 +718,13 @@
instance->snd_buf, PAGE_SIZE,
cxacru_blocking_completion, &instance->snd_done, 4);
- init_MUTEX(&instance->cm_serialize);
+ mutex_init(&instance->cm_serialize);
INIT_WORK(&instance->poll_work, (void *)cxacru_poll_status, instance);
usbatm_instance->driver_data = instance;
- *need_heavy_init = cxacru_card_status(instance);
+ usbatm_instance->flags = (cxacru_card_status(instance) ? 0 : UDSL_SKIP_HEAVY_INIT);
return 0;
@@ -787,12 +784,12 @@
{ /* V = Conexant P = ADSL modem (Hasbani project) */
USB_DEVICE(0x0572, 0xcb00), .driver_info = (unsigned long) &cxacru_cb00
},
- { /* V = Conexant P = ADSL modem (Well PTI-800 */
- USB_DEVICE(0x0572, 0xcb02), .driver_info = (unsigned long) &cxacru_cb00
- },
{ /* V = Conexant P = ADSL modem */
USB_DEVICE(0x0572, 0xcb01), .driver_info = (unsigned long) &cxacru_cb00
},
+ { /* V = Conexant P = ADSL modem (Well PTI-800) */
+ USB_DEVICE(0x0572, 0xcb02), .driver_info = (unsigned long) &cxacru_cb00
+ },
{ /* V = Conexant P = ADSL modem */
USB_DEVICE(0x0572, 0xcb06), .driver_info = (unsigned long) &cxacru_cb00
},
@@ -835,14 +832,13 @@
MODULE_DEVICE_TABLE(usb, cxacru_usb_ids);
static struct usbatm_driver cxacru_driver = {
- .owner = THIS_MODULE,
.driver_name = cxacru_driver_name,
.bind = cxacru_bind,
.heavy_init = cxacru_heavy_init,
.unbind = cxacru_unbind,
.atm_start = cxacru_atm_start,
- .in = CXACRU_EP_DATA,
- .out = CXACRU_EP_DATA,
+ .bulk_in = CXACRU_EP_DATA,
+ .bulk_out = CXACRU_EP_DATA,
.rx_padding = 3,
.tx_padding = 11,
};
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index c1b47d7..7860c8a 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -35,12 +35,14 @@
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/usb_ch9.h>
#include <linux/workqueue.h>
#include "usbatm.h"
#define DRIVER_AUTHOR "Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
-#define DRIVER_VERSION "1.9"
+#define DRIVER_VERSION "1.10"
#define DRIVER_DESC "Alcatel SpeedTouch USB driver version " DRIVER_VERSION
static const char speedtch_driver_name[] = "speedtch";
@@ -66,31 +68,42 @@
#define RESUBMIT_DELAY 1000 /* milliseconds */
-#define DEFAULT_ALTSETTING 1
+#define DEFAULT_BULK_ALTSETTING 1
+#define DEFAULT_ISOC_ALTSETTING 2
#define DEFAULT_DL_512_FIRST 0
+#define DEFAULT_ENABLE_ISOC 0
#define DEFAULT_SW_BUFFERING 0
-static int altsetting = DEFAULT_ALTSETTING;
+static unsigned int altsetting = 0; /* zero means: use the default */
static int dl_512_first = DEFAULT_DL_512_FIRST;
+static int enable_isoc = DEFAULT_ENABLE_ISOC;
static int sw_buffering = DEFAULT_SW_BUFFERING;
-module_param(altsetting, int, S_IRUGO | S_IWUSR);
+module_param(altsetting, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(altsetting,
- "Alternative setting for data interface (default: "
- __MODULE_STRING(DEFAULT_ALTSETTING) ")");
+ "Alternative setting for data interface (bulk_default: "
+ __MODULE_STRING(DEFAULT_BULK_ALTSETTING) "; isoc_default: "
+ __MODULE_STRING(DEFAULT_ISOC_ALTSETTING) ")");
module_param(dl_512_first, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(dl_512_first,
"Read 512 bytes before sending firmware (default: "
__MODULE_STRING(DEFAULT_DL_512_FIRST) ")");
+module_param(enable_isoc, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_isoc,
+ "Use isochronous transfers if available (default: "
+ __MODULE_STRING(DEFAULT_ENABLE_ISOC) ")");
+
module_param(sw_buffering, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(sw_buffering,
"Enable software buffering (default: "
__MODULE_STRING(DEFAULT_SW_BUFFERING) ")");
+#define INTERFACE_DATA 1
#define ENDPOINT_INT 0x81
-#define ENDPOINT_DATA 0x07
+#define ENDPOINT_BULK_DATA 0x07
+#define ENDPOINT_ISOC_DATA 0x07
#define ENDPOINT_FIRMWARE 0x05
#define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) )
@@ -98,6 +111,8 @@
struct speedtch_instance_data {
struct usbatm_data *usbatm;
+ unsigned int altsetting;
+
struct work_struct status_checker;
unsigned char last_status;
@@ -205,7 +220,7 @@
buffer, 0x200, &actual_length, 2000);
if (ret < 0 && ret != -ETIMEDOUT)
- usb_dbg(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
+ usb_warn(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
else
usb_dbg(usbatm, "%s: BLOCK0 downloaded (%d bytes)\n", __func__, ret);
}
@@ -219,7 +234,7 @@
buffer, thislen, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
- usb_dbg(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
+ usb_err(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
goto out_free;
}
usb_dbg(usbatm, "%s: BLOCK1 uploaded (%zu bytes)\n", __func__, fw1->size);
@@ -232,7 +247,7 @@
buffer, 0x200, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
- usb_dbg(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
+ usb_err(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
goto out_free;
}
usb_dbg(usbatm, "%s: BLOCK2 downloaded (%d bytes)\n", __func__, actual_length);
@@ -246,7 +261,7 @@
buffer, thislen, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
- usb_dbg(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
+ usb_err(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
goto out_free;
}
}
@@ -259,7 +274,7 @@
buffer, 0x200, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
- usb_dbg(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
+ usb_err(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
goto out_free;
}
@@ -270,6 +285,11 @@
because we're in our own kernel thread anyway. */
msleep_interruptible(1000);
+ if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) {
+ usb_err(usbatm, "%s: setting interface to %d failed (%d)!\n", __func__, instance->altsetting, ret);
+ goto out_free;
+ }
+
/* Enable software buffering, if requested */
if (sw_buffering)
speedtch_set_swbuff(instance, 1);
@@ -285,8 +305,8 @@
return ret;
}
-static int speedtch_find_firmware(struct usb_interface *intf, int phase,
- const struct firmware **fw_p)
+static int speedtch_find_firmware(struct usbatm_data *usbatm, struct usb_interface *intf,
+ int phase, const struct firmware **fw_p)
{
struct device *dev = &intf->dev;
const u16 bcdDevice = le16_to_cpu(interface_to_usbdev(intf)->descriptor.bcdDevice);
@@ -295,24 +315,24 @@
char buf[24];
sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision);
- dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
+ usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
if (request_firmware(fw_p, buf, dev)) {
sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision);
- dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
+ usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
if (request_firmware(fw_p, buf, dev)) {
sprintf(buf, "speedtch-%d.bin", phase);
- dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
+ usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
if (request_firmware(fw_p, buf, dev)) {
- dev_warn(dev, "no stage %d firmware found!\n", phase);
+ usb_err(usbatm, "%s: no stage %d firmware found!\n", __func__, phase);
return -ENOENT;
}
}
}
- dev_info(dev, "found stage %d firmware %s\n", phase, buf);
+ usb_info(usbatm, "found stage %d firmware %s\n", phase, buf);
return 0;
}
@@ -323,15 +343,16 @@
struct speedtch_instance_data *instance = usbatm->driver_data;
int ret;
- if ((ret = speedtch_find_firmware(intf, 1, &fw1)) < 0)
- return ret;
+ if ((ret = speedtch_find_firmware(usbatm, intf, 1, &fw1)) < 0)
+ return ret;
- if ((ret = speedtch_find_firmware(intf, 2, &fw2)) < 0) {
+ if ((ret = speedtch_find_firmware(usbatm, intf, 2, &fw2)) < 0) {
release_firmware(fw1);
return ret;
}
- ret = speedtch_upload_firmware(instance, fw1, fw2);
+ if ((ret = speedtch_upload_firmware(instance, fw1, fw2)) < 0)
+ usb_err(usbatm, "%s: firmware upload failed (%d)!\n", __func__, ret);
release_firmware(fw2);
release_firmware(fw1);
@@ -428,7 +449,9 @@
int down_speed, up_speed, ret;
unsigned char status;
+#ifdef VERBOSE_DEBUG
atm_dbg(usbatm, "%s entered\n", __func__);
+#endif
ret = speedtch_read_status(instance);
if (ret < 0) {
@@ -441,9 +464,9 @@
status = buf[OFFSET_7];
- atm_dbg(usbatm, "%s: line state %02x\n", __func__, status);
-
if ((status != instance->last_status) || !status) {
+ atm_dbg(usbatm, "%s: line state 0x%02x\n", __func__, status);
+
switch (status) {
case 0:
atm_dev->signal = ATM_PHY_SIG_LOST;
@@ -484,7 +507,7 @@
default:
atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
- atm_info(usbatm, "Unknown line state %02x\n", status);
+ atm_info(usbatm, "unknown line state %02x\n", status);
break;
}
@@ -583,11 +606,6 @@
atm_dbg(usbatm, "%s entered\n", __func__);
- if ((ret = usb_set_interface(usb_dev, 1, altsetting)) < 0) {
- atm_dbg(usbatm, "%s: usb_set_interface returned %d!\n", __func__, ret);
- return ret;
- }
-
/* Set MAC address, it is stored in the serial number */
memset(atm_dev->esi, 0, sizeof(atm_dev->esi));
if (usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) {
@@ -678,20 +696,27 @@
static int speedtch_bind(struct usbatm_data *usbatm,
struct usb_interface *intf,
- const struct usb_device_id *id,
- int *need_heavy_init)
+ const struct usb_device_id *id)
{
struct usb_device *usb_dev = interface_to_usbdev(intf);
- struct usb_interface *cur_intf;
+ struct usb_interface *cur_intf, *data_intf;
struct speedtch_instance_data *instance;
int ifnum = intf->altsetting->desc.bInterfaceNumber;
int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces;
int i, ret;
+ int use_isoc;
usb_dbg(usbatm, "%s entered\n", __func__);
+ /* sanity checks */
+
if (usb_dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) {
- usb_dbg(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass);
+ usb_err(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass);
+ return -ENODEV;
+ }
+
+ if (!(data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA))) {
+ usb_err(usbatm, "%s: data interface not found!\n", __func__);
return -ENODEV;
}
@@ -704,25 +729,71 @@
ret = usb_driver_claim_interface(&speedtch_usb_driver, cur_intf, usbatm);
if (ret < 0) {
- usb_dbg(usbatm, "%s: failed to claim interface %d (%d)\n", __func__, i, ret);
+ usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, i, ret);
speedtch_release_interfaces(usb_dev, i);
return ret;
}
}
}
- instance = kmalloc(sizeof(*instance), GFP_KERNEL);
+ instance = kzalloc(sizeof(*instance), GFP_KERNEL);
if (!instance) {
- usb_dbg(usbatm, "%s: no memory for instance data!\n", __func__);
+ usb_err(usbatm, "%s: no memory for instance data!\n", __func__);
ret = -ENOMEM;
goto fail_release;
}
- memset(instance, 0, sizeof(struct speedtch_instance_data));
-
instance->usbatm = usbatm;
+ /* altsetting and enable_isoc may change at any moment, so take a snapshot */
+ instance->altsetting = altsetting;
+ use_isoc = enable_isoc;
+
+ if (instance->altsetting)
+ if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) {
+ usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, instance->altsetting, ret);
+ instance->altsetting = 0; /* fall back to default */
+ }
+
+ if (!instance->altsetting && use_isoc)
+ if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ISOC_ALTSETTING)) < 0) {
+ usb_dbg(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ISOC_ALTSETTING, ret);
+ use_isoc = 0; /* fall back to bulk */
+ }
+
+ if (use_isoc) {
+ const struct usb_host_interface *desc = data_intf->cur_altsetting;
+ const __u8 target_address = USB_DIR_IN | usbatm->driver->isoc_in;
+ int i;
+
+ use_isoc = 0; /* fall back to bulk if endpoint not found */
+
+ for (i=0; i<desc->desc.bNumEndpoints; i++) {
+ const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc;
+
+ if ((endpoint_desc->bEndpointAddress == target_address)) {
+ use_isoc = (endpoint_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_ISOC;
+ break;
+ }
+ }
+
+ if (!use_isoc)
+ usb_info(usbatm, "isochronous transfer not supported - using bulk\n");
+ }
+
+ if (!use_isoc && !instance->altsetting)
+ if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_BULK_ALTSETTING)) < 0) {
+ usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_BULK_ALTSETTING, ret);
+ goto fail_free;
+ }
+
+ if (!instance->altsetting)
+ instance->altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING;
+
+ usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0);
+
INIT_WORK(&instance->status_checker, (void *)speedtch_check_status, instance);
instance->status_checker.timer.function = speedtch_status_poll;
@@ -749,13 +820,15 @@
0x12, 0xc0, 0x07, 0x00,
instance->scratch_buffer + OFFSET_7, SIZE_7, 500);
- *need_heavy_init = (ret != SIZE_7);
+ usbatm->flags |= (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0);
- usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, need_heavy_init ? "not" : "already");
+ usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, usbatm->flags & UDSL_SKIP_HEAVY_INIT ? "already" : "not");
- if (*need_heavy_init)
- if ((ret = usb_reset_device(usb_dev)) < 0)
+ if (!(usbatm->flags & UDSL_SKIP_HEAVY_INIT))
+ if ((ret = usb_reset_device(usb_dev)) < 0) {
+ usb_err(usbatm, "%s: device reset failed (%d)!\n", __func__, ret);
goto fail_free;
+ }
usbatm->driver_data = instance;
@@ -787,15 +860,15 @@
***********/
static struct usbatm_driver speedtch_usbatm_driver = {
- .owner = THIS_MODULE,
.driver_name = speedtch_driver_name,
.bind = speedtch_bind,
.heavy_init = speedtch_heavy_init,
.unbind = speedtch_unbind,
.atm_start = speedtch_atm_start,
.atm_stop = speedtch_atm_stop,
- .in = ENDPOINT_DATA,
- .out = ENDPOINT_DATA
+ .bulk_in = ENDPOINT_BULK_DATA,
+ .bulk_out = ENDPOINT_BULK_DATA,
+ .isoc_in = ENDPOINT_ISOC_DATA
};
static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 7d2a679..830d2c9 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -63,11 +63,12 @@
#include <linux/ctype.h>
#include <linux/kthread.h>
#include <linux/version.h>
+#include <linux/mutex.h>
#include <asm/unaligned.h>
#include "usbatm.h"
-#define EAGLEUSBVERSION "ueagle 1.1"
+#define EAGLEUSBVERSION "ueagle 1.2"
/*
@@ -358,16 +359,19 @@
#define INTR_PKT_SIZE 28
static struct usb_driver uea_driver;
-static DECLARE_MUTEX(uea_semaphore);
+static DEFINE_MUTEX(uea_mutex);
static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III"};
static int modem_index;
static unsigned int debug;
+static int use_iso[NB_MODEM] = {[0 ... (NB_MODEM - 1)] = 1};
static int sync_wait[NB_MODEM];
static char *cmv_file[NB_MODEM];
module_param(debug, uint, 0644);
MODULE_PARM_DESC(debug, "module debug level (0=off,1=on,2=verbose)");
+module_param_array(use_iso, bool, NULL, 0644);
+MODULE_PARM_DESC(use_iso, "use isochronous usb pipe for incoming traffic");
module_param_array(sync_wait, bool, NULL, 0644);
MODULE_PARM_DESC(sync_wait, "wait the synchronisation before starting ATM");
module_param_array(cmv_file, charp, NULL, 0644);
@@ -628,8 +632,7 @@
dsp_name = FW_DIR "DSPep.bin";
}
- ret = request_firmware(&sc->dsp_firm,
- dsp_name, &sc->usb_dev->dev);
+ ret = request_firmware(&sc->dsp_firm, dsp_name, &sc->usb_dev->dev);
if (ret < 0) {
uea_err(INS_TO_USBDEV(sc),
"requesting firmware %s failed with error %d\n",
@@ -744,7 +747,6 @@
return ret;
return (ret == 0) ? -ETIMEDOUT : 0;
-
}
#define UCDC_SEND_ENCAPSULATED_COMMAND 0x00
@@ -935,6 +937,7 @@
* ADI930 don't support it (-EPIPE error).
*/
if (UEA_CHIP_VERSION(sc) != ADI930
+ && !use_iso[sc->modem_index]
&& sc->stats.phy.dsrate != (data >> 16) * 32) {
/* Original timming from ADI(used in windows driver)
* 0x20ffff>>16 * 32 = 32 * 32 = 1Mbits
@@ -1010,7 +1013,7 @@
int ret, size;
u8 *data;
char *file;
- static char cmv_name[256] = FW_DIR;
+ char cmv_name[FIRMWARE_NAME_MAX]; /* 30 bytes stack variable */
if (cmv_file[sc->modem_index] == NULL) {
if (UEA_CHIP_VERSION(sc) == ADI930)
@@ -1184,8 +1187,7 @@
}
}
- /* finish to send the fpga
- */
+ /* finish to send the fpga */
ret = uea_request(sc, 0xe, 1, 0, NULL);
if (ret < 0) {
uea_err(INS_TO_USBDEV(sc),
@@ -1193,9 +1195,7 @@
goto err1;
}
- /*
- * Tell the modem we finish : de-assert reset
- */
+ /* Tell the modem we finish : de-assert reset */
value = 0;
ret = uea_send_modem_cmd(sc->usb_dev, 0xe, 1, &value);
if (ret < 0)
@@ -1209,6 +1209,7 @@
return ret;
}
+/* The modem send us an ack. First with check if it right */
static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
{
uea_enters(INS_TO_USBDEV(sc));
@@ -1268,23 +1269,19 @@
*/
static void uea_intr(struct urb *urb, struct pt_regs *regs)
{
- struct uea_softc *sc = (struct uea_softc *)urb->context;
- struct intr_pkt *intr;
+ struct uea_softc *sc = urb->context;
+ struct intr_pkt *intr = urb->transfer_buffer;
uea_enters(INS_TO_USBDEV(sc));
- if (urb->status < 0) {
+ if (unlikely(urb->status < 0)) {
uea_err(INS_TO_USBDEV(sc), "uea_intr() failed with %d\n",
urb->status);
return;
}
- intr = (struct intr_pkt *) urb->transfer_buffer;
-
/* device-to-host interrupt */
if (intr->bType != 0x08 || sc->booting) {
- uea_err(INS_TO_USBDEV(sc), "wrong intr\n");
- // rebooting ?
- // sc->reset = 1;
+ uea_err(INS_TO_USBDEV(sc), "wrong interrupt\n");
goto resubmit;
}
@@ -1300,7 +1297,7 @@
break;
default:
- uea_err(INS_TO_USBDEV(sc), "unknown intr %u\n",
+ uea_err(INS_TO_USBDEV(sc), "unknown interrupt %u\n",
le16_to_cpu(intr->wInterrupt));
}
@@ -1379,7 +1376,7 @@
int ret;
uea_enters(INS_TO_USBDEV(sc));
ret = kthread_stop(sc->kthread);
- uea_info(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret);
+ uea_dbg(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret);
/* stop any pending boot process */
flush_scheduled_work();
@@ -1418,13 +1415,13 @@
int ret = -ENODEV;
struct uea_softc *sc;
- down(&uea_semaphore);
+ mutex_lock(&uea_mutex);
sc = dev_to_uea(dev);
if (!sc)
goto out;
ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.state);
out:
- up(&uea_semaphore);
+ mutex_unlock(&uea_mutex);
return ret;
}
@@ -1434,14 +1431,14 @@
int ret = -ENODEV;
struct uea_softc *sc;
- down(&uea_semaphore);
+ mutex_lock(&uea_mutex);
sc = dev_to_uea(dev);
if (!sc)
goto out;
sc->reset = 1;
ret = count;
out:
- up(&uea_semaphore);
+ mutex_unlock(&uea_mutex);
return ret;
}
@@ -1453,7 +1450,7 @@
int ret = -ENODEV;
struct uea_softc *sc;
- down(&uea_semaphore);
+ mutex_lock(&uea_mutex);
sc = dev_to_uea(dev);
if (!sc)
goto out;
@@ -1473,7 +1470,7 @@
break;
}
out:
- up(&uea_semaphore);
+ mutex_unlock(&uea_mutex);
return ret;
}
@@ -1485,7 +1482,7 @@
int ret = -ENODEV;
struct uea_softc *sc;
- down(&uea_semaphore);
+ mutex_lock(&uea_mutex);
sc = dev_to_uea(dev);
if (!sc)
goto out;
@@ -1497,7 +1494,7 @@
else
ret = sprintf(buf, "GOOD\n");
out:
- up(&uea_semaphore);
+ mutex_unlock(&uea_mutex);
return ret;
}
@@ -1511,7 +1508,7 @@
int ret = -ENODEV; \
struct uea_softc *sc; \
\
- down(&uea_semaphore); \
+ mutex_lock(&uea_mutex); \
sc = dev_to_uea(dev); \
if (!sc) \
goto out; \
@@ -1519,7 +1516,7 @@
if (reset) \
sc->stats.phy.name = 0; \
out: \
- up(&uea_semaphore); \
+ mutex_unlock(&uea_mutex); \
return ret; \
} \
\
@@ -1617,7 +1614,7 @@
}
static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
- const struct usb_device_id *id, int *heavy)
+ const struct usb_device_id *id)
{
struct usb_device *usb = interface_to_usbdev(intf);
struct uea_softc *sc;
@@ -1629,16 +1626,14 @@
if (ifnum != UEA_INTR_IFACE_NO)
return -ENODEV;
- *heavy = sync_wait[modem_index];
+ usbatm->flags = (sync_wait[modem_index] ? 0 : UDSL_SKIP_HEAVY_INIT);
/* interface 1 is for outbound traffic */
ret = claim_interface(usb, usbatm, UEA_US_IFACE_NO);
if (ret < 0)
return ret;
- /* ADI930 has only 2 interfaces and inbound traffic
- * is on interface 1
- */
+ /* ADI930 has only 2 interfaces and inbound traffic is on interface 1 */
if (UEA_CHIP_VERSION(id) != ADI930) {
/* interface 2 is for inbound traffic */
ret = claim_interface(usb, usbatm, UEA_DS_IFACE_NO);
@@ -1658,6 +1653,25 @@
sc->modem_index = (modem_index < NB_MODEM) ? modem_index++ : 0;
sc->driver_info = id->driver_info;
+ /* ADI930 don't support iso */
+ if (UEA_CHIP_VERSION(id) != ADI930 && use_iso[sc->modem_index]) {
+ int i;
+
+ /* try set fastest alternate for inbound traffic interface */
+ for (i = FASTEST_ISO_INTF; i > 0; i--)
+ if (usb_set_interface(usb, UEA_DS_IFACE_NO, i) == 0)
+ break;
+
+ if (i > 0) {
+ uea_dbg(usb, "set alternate %d for 2 interface\n", i);
+ uea_info(usb, "using iso mode\n");
+ usbatm->flags |= UDSL_USE_ISOC | UDSL_IGNORE_EILSEQ;
+ } else {
+ uea_err(usb, "setting any alternate failed for "
+ "2 interface, using bulk mode\n");
+ }
+ }
+
ret = uea_boot(sc);
if (ret < 0) {
kfree(sc);
@@ -1701,13 +1715,13 @@
static struct usbatm_driver uea_usbatm_driver = {
.driver_name = "ueagle-atm",
- .owner = THIS_MODULE,
.bind = uea_bind,
.atm_start = uea_atm_open,
.unbind = uea_unbind,
.heavy_init = uea_heavy,
- .in = UEA_BULK_DATA_PIPE,
- .out = UEA_BULK_DATA_PIPE,
+ .bulk_in = UEA_BULK_DATA_PIPE,
+ .bulk_out = UEA_BULK_DATA_PIPE,
+ .isoc_in = UEA_ISO_DATA_PIPE,
};
static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
@@ -1738,9 +1752,9 @@
* Pre-firmware device has one interface
*/
if (usb->config->desc.bNumInterfaces != 1 && ifnum == 0) {
- down(&uea_semaphore);
+ mutex_lock(&uea_mutex);
usbatm_usb_disconnect(intf);
- up(&uea_semaphore);
+ mutex_unlock(&uea_mutex);
uea_info(usb, "ADSL device removed\n");
}
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 7af1883..c1211fc 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -72,6 +72,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/netdevice.h>
#include <linux/proc_fs.h>
#include <linux/sched.h>
#include <linux/signal.h>
@@ -91,19 +92,18 @@
#endif
#define DRIVER_AUTHOR "Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
-#define DRIVER_VERSION "1.9"
+#define DRIVER_VERSION "1.10"
#define DRIVER_DESC "Generic USB ATM/DSL I/O, version " DRIVER_VERSION
static const char usbatm_driver_name[] = "usbatm";
#define UDSL_MAX_RCV_URBS 16
#define UDSL_MAX_SND_URBS 16
-#define UDSL_MAX_RCV_BUF_SIZE 1024 /* ATM cells */
-#define UDSL_MAX_SND_BUF_SIZE 1024 /* ATM cells */
+#define UDSL_MAX_BUF_SIZE 64 * 1024 /* bytes */
#define UDSL_DEFAULT_RCV_URBS 4
#define UDSL_DEFAULT_SND_URBS 4
-#define UDSL_DEFAULT_RCV_BUF_SIZE 64 /* ATM cells */
-#define UDSL_DEFAULT_SND_BUF_SIZE 64 /* ATM cells */
+#define UDSL_DEFAULT_RCV_BUF_SIZE 64 * ATM_CELL_SIZE /* bytes */
+#define UDSL_DEFAULT_SND_BUF_SIZE 64 * ATM_CELL_SIZE /* bytes */
#define ATM_CELL_HEADER (ATM_CELL_SIZE - ATM_CELL_PAYLOAD)
@@ -111,8 +111,8 @@
static unsigned int num_rcv_urbs = UDSL_DEFAULT_RCV_URBS;
static unsigned int num_snd_urbs = UDSL_DEFAULT_SND_URBS;
-static unsigned int rcv_buf_size = UDSL_DEFAULT_RCV_BUF_SIZE;
-static unsigned int snd_buf_size = UDSL_DEFAULT_SND_BUF_SIZE;
+static unsigned int rcv_buf_bytes = UDSL_DEFAULT_RCV_BUF_SIZE;
+static unsigned int snd_buf_bytes = UDSL_DEFAULT_SND_BUF_SIZE;
module_param(num_rcv_urbs, uint, S_IRUGO);
MODULE_PARM_DESC(num_rcv_urbs,
@@ -126,15 +126,15 @@
__MODULE_STRING(UDSL_MAX_SND_URBS) ", default: "
__MODULE_STRING(UDSL_DEFAULT_SND_URBS) ")");
-module_param(rcv_buf_size, uint, S_IRUGO);
-MODULE_PARM_DESC(rcv_buf_size,
- "Size of the buffers used for reception in ATM cells (range: 1-"
- __MODULE_STRING(UDSL_MAX_RCV_BUF_SIZE) ", default: "
+module_param(rcv_buf_bytes, uint, S_IRUGO);
+MODULE_PARM_DESC(rcv_buf_bytes,
+ "Size of the buffers used for reception, in bytes (range: 1-"
+ __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: "
__MODULE_STRING(UDSL_DEFAULT_RCV_BUF_SIZE) ")");
-module_param(snd_buf_size, uint, S_IRUGO);
-MODULE_PARM_DESC(snd_buf_size,
- "Size of the buffers used for transmission in ATM cells (range: 1-"
+module_param(snd_buf_bytes, uint, S_IRUGO);
+MODULE_PARM_DESC(snd_buf_bytes,
+ "Size of the buffers used for transmission, in bytes (range: 1-"
__MODULE_STRING(UDSL_MAX_SND_BUF_SIZE) ", default: "
__MODULE_STRING(UDSL_DEFAULT_SND_BUF_SIZE) ")");
@@ -166,10 +166,10 @@
/* ATM */
-static void usbatm_atm_dev_close(struct atm_dev *dev);
+static void usbatm_atm_dev_close(struct atm_dev *atm_dev);
static int usbatm_atm_open(struct atm_vcc *vcc);
static void usbatm_atm_close(struct atm_vcc *vcc);
-static int usbatm_atm_ioctl(struct atm_dev *dev, unsigned int cmd, void __user * arg);
+static int usbatm_atm_ioctl(struct atm_dev *atm_dev, unsigned int cmd, void __user * arg);
static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb);
static int usbatm_atm_proc_read(struct atm_dev *atm_dev, loff_t * pos, char *page);
@@ -199,7 +199,7 @@
if (vcc->pop)
vcc->pop(vcc, skb);
else
- dev_kfree_skb(skb);
+ dev_kfree_skb_any(skb);
}
@@ -234,8 +234,9 @@
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret) {
- atm_dbg(channel->usbatm, "%s: urb 0x%p submission failed (%d)!\n",
- __func__, urb, ret);
+ if (printk_ratelimit())
+ atm_warn(channel->usbatm, "%s: urb 0x%p submission failed (%d)!\n",
+ __func__, urb, ret);
/* consider all errors transient and return the buffer back to the queue */
urb->status = -EAGAIN;
@@ -269,10 +270,16 @@
spin_unlock_irqrestore(&channel->lock, flags);
- if (unlikely(urb->status))
+ if (unlikely(urb->status) &&
+ (!(channel->usbatm->flags & UDSL_IGNORE_EILSEQ) ||
+ urb->status != -EILSEQ ))
+ {
+ if (printk_ratelimit())
+ atm_warn(channel->usbatm, "%s: urb 0x%p failed (%d)!\n",
+ __func__, urb, urb->status);
/* throttle processing in case of an error */
mod_timer(&channel->delay, jiffies + msecs_to_jiffies(THROTTLE_MSECS));
- else
+ } else
tasklet_schedule(&channel->tasklet);
}
@@ -284,128 +291,166 @@
static inline struct usbatm_vcc_data *usbatm_find_vcc(struct usbatm_data *instance,
short vpi, int vci)
{
- struct usbatm_vcc_data *vcc;
+ struct usbatm_vcc_data *vcc_data;
- list_for_each_entry(vcc, &instance->vcc_list, list)
- if ((vcc->vci == vci) && (vcc->vpi == vpi))
- return vcc;
+ list_for_each_entry(vcc_data, &instance->vcc_list, list)
+ if ((vcc_data->vci == vci) && (vcc_data->vpi == vpi))
+ return vcc_data;
return NULL;
}
-static void usbatm_extract_cells(struct usbatm_data *instance,
- unsigned char *source, unsigned int avail_data)
+static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char *source)
{
- struct usbatm_vcc_data *cached_vcc = NULL;
struct atm_vcc *vcc;
struct sk_buff *sarb;
- unsigned int stride = instance->rx_channel.stride;
- int vci, cached_vci = 0;
- short vpi, cached_vpi = 0;
- u8 pti;
+ short vpi = ((source[0] & 0x0f) << 4) | (source[1] >> 4);
+ int vci = ((source[1] & 0x0f) << 12) | (source[2] << 4) | (source[3] >> 4);
+ u8 pti = ((source[3] & 0xe) >> 1);
- for (; avail_data >= stride; avail_data -= stride, source += stride) {
- vpi = ((source[0] & 0x0f) << 4) | (source[1] >> 4);
- vci = ((source[1] & 0x0f) << 12) | (source[2] << 4) | (source[3] >> 4);
- pti = ((source[3] & 0xe) >> 1);
+ vdbg("%s: vpi %hd, vci %d, pti %d", __func__, vpi, vci, pti);
- vdbg("%s: vpi %hd, vci %d, pti %d", __func__, vpi, vci, pti);
+ if ((vci != instance->cached_vci) || (vpi != instance->cached_vpi)) {
+ instance->cached_vpi = vpi;
+ instance->cached_vci = vci;
- if ((vci != cached_vci) || (vpi != cached_vpi)) {
- cached_vpi = vpi;
- cached_vci = vci;
+ instance->cached_vcc = usbatm_find_vcc(instance, vpi, vci);
- cached_vcc = usbatm_find_vcc(instance, vpi, vci);
+ if (!instance->cached_vcc)
+ atm_rldbg(instance, "%s: unknown vpi/vci (%hd/%d)!\n", __func__, vpi, vci);
+ }
- if (!cached_vcc)
- atm_dbg(instance, "%s: unknown vpi/vci (%hd/%d)!\n", __func__, vpi, vci);
- }
+ if (!instance->cached_vcc)
+ return;
- if (!cached_vcc)
- continue;
+ vcc = instance->cached_vcc->vcc;
- vcc = cached_vcc->vcc;
+ /* OAM F5 end-to-end */
+ if (pti == ATM_PTI_E2EF5) {
+ if (printk_ratelimit())
+ atm_warn(instance, "%s: OAM not supported (vpi %d, vci %d)!\n",
+ __func__, vpi, vci);
+ atomic_inc(&vcc->stats->rx_err);
+ return;
+ }
- /* OAM F5 end-to-end */
- if (pti == ATM_PTI_E2EF5) {
- atm_warn(instance, "%s: OAM not supported (vpi %d, vci %d)!\n", __func__, vpi, vci);
+ sarb = instance->cached_vcc->sarb;
+
+ if (sarb->tail + ATM_CELL_PAYLOAD > sarb->end) {
+ atm_rldbg(instance, "%s: buffer overrun (sarb->len %u, vcc: 0x%p)!\n",
+ __func__, sarb->len, vcc);
+ /* discard cells already received */
+ skb_trim(sarb, 0);
+ UDSL_ASSERT(sarb->tail + ATM_CELL_PAYLOAD <= sarb->end);
+ }
+
+ memcpy(sarb->tail, source + ATM_CELL_HEADER, ATM_CELL_PAYLOAD);
+ __skb_put(sarb, ATM_CELL_PAYLOAD);
+
+ if (pti & 1) {
+ struct sk_buff *skb;
+ unsigned int length;
+ unsigned int pdu_length;
+
+ length = (source[ATM_CELL_SIZE - 6] << 8) + source[ATM_CELL_SIZE - 5];
+
+ /* guard against overflow */
+ if (length > ATM_MAX_AAL5_PDU) {
+ atm_rldbg(instance, "%s: bogus length %u (vcc: 0x%p)!\n",
+ __func__, length, vcc);
atomic_inc(&vcc->stats->rx_err);
- continue;
+ goto out;
}
- sarb = cached_vcc->sarb;
+ pdu_length = usbatm_pdu_length(length);
- if (sarb->tail + ATM_CELL_PAYLOAD > sarb->end) {
- atm_dbg(instance, "%s: buffer overrun (sarb->len %u, vcc: 0x%p)!\n",
- __func__, sarb->len, vcc);
- /* discard cells already received */
- skb_trim(sarb, 0);
- UDSL_ASSERT(sarb->tail + ATM_CELL_PAYLOAD <= sarb->end);
+ if (sarb->len < pdu_length) {
+ atm_rldbg(instance, "%s: bogus pdu_length %u (sarb->len: %u, vcc: 0x%p)!\n",
+ __func__, pdu_length, sarb->len, vcc);
+ atomic_inc(&vcc->stats->rx_err);
+ goto out;
}
- memcpy(sarb->tail, source + ATM_CELL_HEADER, ATM_CELL_PAYLOAD);
- __skb_put(sarb, ATM_CELL_PAYLOAD);
-
- if (pti & 1) {
- struct sk_buff *skb;
- unsigned int length;
- unsigned int pdu_length;
-
- length = (source[ATM_CELL_SIZE - 6] << 8) + source[ATM_CELL_SIZE - 5];
-
- /* guard against overflow */
- if (length > ATM_MAX_AAL5_PDU) {
- atm_dbg(instance, "%s: bogus length %u (vcc: 0x%p)!\n",
- __func__, length, vcc);
- atomic_inc(&vcc->stats->rx_err);
- goto out;
- }
-
- pdu_length = usbatm_pdu_length(length);
-
- if (sarb->len < pdu_length) {
- atm_dbg(instance, "%s: bogus pdu_length %u (sarb->len: %u, vcc: 0x%p)!\n",
- __func__, pdu_length, sarb->len, vcc);
- atomic_inc(&vcc->stats->rx_err);
- goto out;
- }
-
- if (crc32_be(~0, sarb->tail - pdu_length, pdu_length) != 0xc704dd7b) {
- atm_dbg(instance, "%s: packet failed crc check (vcc: 0x%p)!\n",
- __func__, vcc);
- atomic_inc(&vcc->stats->rx_err);
- goto out;
- }
-
- vdbg("%s: got packet (length: %u, pdu_length: %u, vcc: 0x%p)", __func__, length, pdu_length, vcc);
-
- if (!(skb = dev_alloc_skb(length))) {
- atm_dbg(instance, "%s: no memory for skb (length: %u)!\n", __func__, length);
- atomic_inc(&vcc->stats->rx_drop);
- goto out;
- }
-
- vdbg("%s: allocated new sk_buff (skb: 0x%p, skb->truesize: %u)", __func__, skb, skb->truesize);
-
- if (!atm_charge(vcc, skb->truesize)) {
- atm_dbg(instance, "%s: failed atm_charge (skb->truesize: %u)!\n", __func__, skb->truesize);
- dev_kfree_skb(skb);
- goto out; /* atm_charge increments rx_drop */
- }
-
- memcpy(skb->data, sarb->tail - pdu_length, length);
- __skb_put(skb, length);
-
- vdbg("%s: sending skb 0x%p, skb->len %u, skb->truesize %u",
- __func__, skb, skb->len, skb->truesize);
-
- PACKETDEBUG(skb->data, skb->len);
-
- vcc->push(vcc, skb);
-
- atomic_inc(&vcc->stats->rx);
- out:
- skb_trim(sarb, 0);
+ if (crc32_be(~0, sarb->tail - pdu_length, pdu_length) != 0xc704dd7b) {
+ atm_rldbg(instance, "%s: packet failed crc check (vcc: 0x%p)!\n",
+ __func__, vcc);
+ atomic_inc(&vcc->stats->rx_err);
+ goto out;
}
+
+ vdbg("%s: got packet (length: %u, pdu_length: %u, vcc: 0x%p)", __func__, length, pdu_length, vcc);
+
+ if (!(skb = dev_alloc_skb(length))) {
+ if (printk_ratelimit())
+ atm_err(instance, "%s: no memory for skb (length: %u)!\n",
+ __func__, length);
+ atomic_inc(&vcc->stats->rx_drop);
+ goto out;
+ }
+
+ vdbg("%s: allocated new sk_buff (skb: 0x%p, skb->truesize: %u)", __func__, skb, skb->truesize);
+
+ if (!atm_charge(vcc, skb->truesize)) {
+ atm_rldbg(instance, "%s: failed atm_charge (skb->truesize: %u)!\n",
+ __func__, skb->truesize);
+ dev_kfree_skb_any(skb);
+ goto out; /* atm_charge increments rx_drop */
+ }
+
+ memcpy(skb->data, sarb->tail - pdu_length, length);
+ __skb_put(skb, length);
+
+ vdbg("%s: sending skb 0x%p, skb->len %u, skb->truesize %u",
+ __func__, skb, skb->len, skb->truesize);
+
+ PACKETDEBUG(skb->data, skb->len);
+
+ vcc->push(vcc, skb);
+
+ atomic_inc(&vcc->stats->rx);
+ out:
+ skb_trim(sarb, 0);
+ }
+}
+
+static void usbatm_extract_cells(struct usbatm_data *instance,
+ unsigned char *source, unsigned int avail_data)
+{
+ unsigned int stride = instance->rx_channel.stride;
+ unsigned int buf_usage = instance->buf_usage;
+
+ /* extract cells from incoming data, taking into account that
+ * the length of avail data may not be a multiple of stride */
+
+ if (buf_usage > 0) {
+ /* we have a partially received atm cell */
+ unsigned char *cell_buf = instance->cell_buf;
+ unsigned int space_left = stride - buf_usage;
+
+ UDSL_ASSERT(buf_usage <= stride);
+
+ if (avail_data >= space_left) {
+ /* add new data and process cell */
+ memcpy(cell_buf + buf_usage, source, space_left);
+ source += space_left;
+ avail_data -= space_left;
+ usbatm_extract_one_cell(instance, cell_buf);
+ instance->buf_usage = 0;
+ } else {
+ /* not enough data to fill the cell */
+ memcpy(cell_buf + buf_usage, source, avail_data);
+ instance->buf_usage = buf_usage + avail_data;
+ return;
+ }
+ }
+
+ for (; avail_data >= stride; avail_data -= stride, source += stride)
+ usbatm_extract_one_cell(instance, source);
+
+ if (avail_data > 0) {
+ /* length was not a multiple of stride -
+ * save remaining data for next call */
+ memcpy(instance->cell_buf, source, avail_data);
+ instance->buf_usage = avail_data;
}
}
@@ -420,14 +465,14 @@
{
struct usbatm_control *ctrl = UDSL_SKB(skb);
struct atm_vcc *vcc = ctrl->atm.vcc;
- unsigned int num_written;
+ unsigned int bytes_written;
unsigned int stride = instance->tx_channel.stride;
vdbg("%s: skb->len=%d, avail_space=%u", __func__, skb->len, avail_space);
UDSL_ASSERT(!(avail_space % stride));
- for (num_written = 0; num_written < avail_space && ctrl->len;
- num_written += stride, target += stride) {
+ for (bytes_written = 0; bytes_written < avail_space && ctrl->len;
+ bytes_written += stride, target += stride) {
unsigned int data_len = min_t(unsigned int, skb->len, ATM_CELL_PAYLOAD);
unsigned int left = ATM_CELL_PAYLOAD - data_len;
u8 *ptr = target;
@@ -470,7 +515,7 @@
ctrl->crc = crc32_be(ctrl->crc, ptr, left);
}
- return num_written;
+ return bytes_written;
}
@@ -487,16 +532,40 @@
vdbg("%s: processing urb 0x%p", __func__, urb);
if (usb_pipeisoc(urb->pipe)) {
+ unsigned char *merge_start = NULL;
+ unsigned int merge_length = 0;
+ const unsigned int packet_size = instance->rx_channel.packet_size;
int i;
- for (i = 0; i < urb->number_of_packets; i++)
- if (!urb->iso_frame_desc[i].status)
- usbatm_extract_cells(instance,
- (u8 *)urb->transfer_buffer + urb->iso_frame_desc[i].offset,
- urb->iso_frame_desc[i].actual_length);
- }
- else
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ if (!urb->iso_frame_desc[i].status) {
+ unsigned int actual_length = urb->iso_frame_desc[i].actual_length;
+
+ UDSL_ASSERT(actual_length <= packet_size);
+
+ if (!merge_length)
+ merge_start = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+ merge_length += actual_length;
+ if (merge_length && (actual_length < packet_size)) {
+ usbatm_extract_cells(instance, merge_start, merge_length);
+ merge_length = 0;
+ }
+ } else {
+ atm_rldbg(instance, "%s: status %d in frame %d!\n", __func__, urb->status, i);
+ if (merge_length)
+ usbatm_extract_cells(instance, merge_start, merge_length);
+ merge_length = 0;
+ instance->buf_usage = 0;
+ }
+ }
+
+ if (merge_length)
+ usbatm_extract_cells(instance, merge_start, merge_length);
+ } else
if (!urb->status)
usbatm_extract_cells(instance, urb->transfer_buffer, urb->actual_length);
+ else
+ instance->buf_usage = 0;
if (usbatm_submit_urb(urb))
return;
@@ -514,7 +583,7 @@
struct sk_buff *skb = instance->current_skb;
struct urb *urb = NULL;
const unsigned int buf_size = instance->tx_channel.buf_size;
- unsigned int num_written = 0;
+ unsigned int bytes_written = 0;
u8 *buffer = NULL;
if (!skb)
@@ -526,16 +595,16 @@
if (!urb)
break; /* no more senders */
buffer = urb->transfer_buffer;
- num_written = (urb->status == -EAGAIN) ?
+ bytes_written = (urb->status == -EAGAIN) ?
urb->transfer_buffer_length : 0;
}
- num_written += usbatm_write_cells(instance, skb,
- buffer + num_written,
- buf_size - num_written);
+ bytes_written += usbatm_write_cells(instance, skb,
+ buffer + bytes_written,
+ buf_size - bytes_written);
vdbg("%s: wrote %u bytes from skb 0x%p to urb 0x%p",
- __func__, num_written, skb, urb);
+ __func__, bytes_written, skb, urb);
if (!UDSL_SKB(skb)->len) {
struct atm_vcc *vcc = UDSL_SKB(skb)->atm.vcc;
@@ -546,8 +615,8 @@
skb = skb_dequeue(&instance->sndqueue);
}
- if (num_written == buf_size || (!skb && num_written)) {
- urb->transfer_buffer_length = num_written;
+ if (bytes_written == buf_size || (!skb && bytes_written)) {
+ urb->transfer_buffer_length = bytes_written;
if (usbatm_submit_urb(urb))
break;
@@ -593,20 +662,24 @@
vdbg("%s called (skb 0x%p, len %u)", __func__, skb, skb->len);
- if (!instance) {
- dbg("%s: NULL data!", __func__);
+ /* racy disconnection check - fine */
+ if (!instance || instance->disconnected) {
+#ifdef DEBUG
+ if (printk_ratelimit())
+ printk(KERN_DEBUG "%s: %s!\n", __func__, instance ? "disconnected" : "NULL instance");
+#endif
err = -ENODEV;
goto fail;
}
if (vcc->qos.aal != ATM_AAL5) {
- atm_dbg(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal);
+ atm_rldbg(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal);
err = -EINVAL;
goto fail;
}
if (skb->len > ATM_MAX_AAL5_PDU) {
- atm_dbg(instance, "%s: packet too long (%d vs %d)!\n",
+ atm_rldbg(instance, "%s: packet too long (%d vs %d)!\n",
__func__, skb->len, ATM_MAX_AAL5_PDU);
err = -EINVAL;
goto fail;
@@ -665,16 +738,16 @@
** ATM **
**********/
-static void usbatm_atm_dev_close(struct atm_dev *dev)
+static void usbatm_atm_dev_close(struct atm_dev *atm_dev)
{
- struct usbatm_data *instance = dev->dev_data;
+ struct usbatm_data *instance = atm_dev->dev_data;
dbg("%s", __func__);
if (!instance)
return;
- dev->dev_data = NULL;
+ atm_dev->dev_data = NULL; /* catch bugs */
usbatm_put_instance(instance); /* taken in usbatm_atm_init */
}
@@ -706,15 +779,19 @@
atomic_read(&atm_dev->stats.aal5.rx_err),
atomic_read(&atm_dev->stats.aal5.rx_drop));
- if (!left--)
- switch (atm_dev->signal) {
- case ATM_PHY_SIG_FOUND:
- return sprintf(page, "Line up\n");
- case ATM_PHY_SIG_LOST:
- return sprintf(page, "Line down\n");
- default:
- return sprintf(page, "Line state unknown\n");
- }
+ if (!left--) {
+ if (instance->disconnected)
+ return sprintf(page, "Disconnected\n");
+ else
+ switch (atm_dev->signal) {
+ case ATM_PHY_SIG_FOUND:
+ return sprintf(page, "Line up\n");
+ case ATM_PHY_SIG_LOST:
+ return sprintf(page, "Line down\n");
+ default:
+ return sprintf(page, "Line state unknown\n");
+ }
+ }
return 0;
}
@@ -735,13 +812,24 @@
atm_dbg(instance, "%s: vpi %hd, vci %d\n", __func__, vpi, vci);
/* only support AAL5 */
- if ((vcc->qos.aal != ATM_AAL5) || (vcc->qos.rxtp.max_sdu < 0)
- || (vcc->qos.rxtp.max_sdu > ATM_MAX_AAL5_PDU)) {
- atm_dbg(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal);
+ if ((vcc->qos.aal != ATM_AAL5)) {
+ atm_warn(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal);
return -EINVAL;
}
- down(&instance->serialize); /* vs self, usbatm_atm_close */
+ /* sanity checks */
+ if ((vcc->qos.rxtp.max_sdu < 0) || (vcc->qos.rxtp.max_sdu > ATM_MAX_AAL5_PDU)) {
+ atm_dbg(instance, "%s: max_sdu %d out of range!\n", __func__, vcc->qos.rxtp.max_sdu);
+ return -EINVAL;
+ }
+
+ mutex_lock(&instance->serialize); /* vs self, usbatm_atm_close, usbatm_usb_disconnect */
+
+ if (instance->disconnected) {
+ atm_dbg(instance, "%s: disconnected!\n", __func__);
+ ret = -ENODEV;
+ goto fail;
+ }
if (usbatm_find_vcc(instance, vpi, vci)) {
atm_dbg(instance, "%s: %hd/%d already in use!\n", __func__, vpi, vci);
@@ -749,20 +837,19 @@
goto fail;
}
- if (!(new = kmalloc(sizeof(struct usbatm_vcc_data), GFP_KERNEL))) {
- atm_dbg(instance, "%s: no memory for vcc_data!\n", __func__);
+ if (!(new = kzalloc(sizeof(struct usbatm_vcc_data), GFP_KERNEL))) {
+ atm_err(instance, "%s: no memory for vcc_data!\n", __func__);
ret = -ENOMEM;
goto fail;
}
- memset(new, 0, sizeof(struct usbatm_vcc_data));
new->vcc = vcc;
new->vpi = vpi;
new->vci = vci;
new->sarb = alloc_skb(usbatm_pdu_length(vcc->qos.rxtp.max_sdu), GFP_KERNEL);
if (!new->sarb) {
- atm_dbg(instance, "%s: no memory for SAR buffer!\n", __func__);
+ atm_err(instance, "%s: no memory for SAR buffer!\n", __func__);
ret = -ENOMEM;
goto fail;
}
@@ -770,6 +857,9 @@
vcc->dev_data = new;
tasklet_disable(&instance->rx_channel.tasklet);
+ instance->cached_vcc = new;
+ instance->cached_vpi = vpi;
+ instance->cached_vci = vci;
list_add(&new->list, &instance->vcc_list);
tasklet_enable(&instance->rx_channel.tasklet);
@@ -777,7 +867,7 @@
set_bit(ATM_VF_PARTIAL, &vcc->flags);
set_bit(ATM_VF_READY, &vcc->flags);
- up(&instance->serialize);
+ mutex_unlock(&instance->serialize);
atm_dbg(instance, "%s: allocated vcc data 0x%p\n", __func__, new);
@@ -785,7 +875,7 @@
fail:
kfree(new);
- up(&instance->serialize);
+ mutex_unlock(&instance->serialize);
return ret;
}
@@ -806,9 +896,14 @@
usbatm_cancel_send(instance, vcc);
- down(&instance->serialize); /* vs self, usbatm_atm_open */
+ mutex_lock(&instance->serialize); /* vs self, usbatm_atm_open, usbatm_usb_disconnect */
tasklet_disable(&instance->rx_channel.tasklet);
+ if (instance->cached_vcc == vcc_data) {
+ instance->cached_vcc = NULL;
+ instance->cached_vpi = ATM_VPI_UNSPEC;
+ instance->cached_vci = ATM_VCI_UNSPEC;
+ }
list_del(&vcc_data->list);
tasklet_enable(&instance->rx_channel.tasklet);
@@ -824,14 +919,21 @@
clear_bit(ATM_VF_PARTIAL, &vcc->flags);
clear_bit(ATM_VF_ADDR, &vcc->flags);
- up(&instance->serialize);
+ mutex_unlock(&instance->serialize);
atm_dbg(instance, "%s successful\n", __func__);
}
-static int usbatm_atm_ioctl(struct atm_dev *dev, unsigned int cmd,
+static int usbatm_atm_ioctl(struct atm_dev *atm_dev, unsigned int cmd,
void __user * arg)
{
+ struct usbatm_data *instance = atm_dev->dev_data;
+
+ if (!instance || instance->disconnected) {
+ dbg("%s: %s!", __func__, instance ? "disconnected" : "NULL instance");
+ return -ENODEV;
+ }
+
switch (cmd) {
case ATM_QUERYLOOP:
return put_user(ATM_LM_NONE, (int __user *)arg) ? -EFAULT : 0;
@@ -845,10 +947,13 @@
struct atm_dev *atm_dev;
int ret, i;
- /* ATM init */
+ /* ATM init. The ATM initialization scheme suffers from an intrinsic race
+ * condition: callbacks we register can be executed at once, before we have
+ * initialized the struct atm_dev. To protect against this, all callbacks
+ * abort if atm_dev->dev_data is NULL. */
atm_dev = atm_dev_register(instance->driver_name, &usbatm_atm_devops, -1, NULL);
if (!atm_dev) {
- usb_dbg(instance, "%s: failed to register ATM device!\n", __func__);
+ usb_err(instance, "%s: failed to register ATM device!\n", __func__);
return -1;
}
@@ -862,12 +967,13 @@
atm_dev->link_rate = 128 * 1000 / 424;
if (instance->driver->atm_start && ((ret = instance->driver->atm_start(instance, atm_dev)) < 0)) {
- atm_dbg(instance, "%s: atm_start failed: %d!\n", __func__, ret);
+ atm_err(instance, "%s: atm_start failed: %d!\n", __func__, ret);
goto fail;
}
- /* ready for ATM callbacks */
usbatm_get_instance(instance); /* dropped in usbatm_atm_dev_close */
+
+ /* ready for ATM callbacks */
mb();
atm_dev->dev_data = instance;
@@ -903,9 +1009,9 @@
if (!ret)
ret = usbatm_atm_init(instance);
- down(&instance->serialize);
+ mutex_lock(&instance->serialize);
instance->thread_pid = -1;
- up(&instance->serialize);
+ mutex_unlock(&instance->serialize);
complete_and_exit(&instance->thread_exited, ret);
}
@@ -915,13 +1021,13 @@
int ret = kernel_thread(usbatm_do_heavy_init, instance, CLONE_KERNEL);
if (ret < 0) {
- usb_dbg(instance, "%s: failed to create kernel_thread (%d)!\n", __func__, ret);
+ usb_err(instance, "%s: failed to create kernel_thread (%d)!\n", __func__, ret);
return ret;
}
- down(&instance->serialize);
+ mutex_lock(&instance->serialize);
instance->thread_pid = ret;
- up(&instance->serialize);
+ mutex_unlock(&instance->serialize);
wait_for_completion(&instance->thread_started);
@@ -951,9 +1057,9 @@
char *buf;
int error = -ENOMEM;
int i, length;
- int need_heavy;
+ unsigned int maxpacket, num_packets;
- dev_dbg(dev, "%s: trying driver %s with vendor=0x%x, product=0x%x, ifnum %d\n",
+ dev_dbg(dev, "%s: trying driver %s with vendor=%04x, product=%04x, ifnum %2d\n",
__func__, driver->driver_name,
le16_to_cpu(usb_dev->descriptor.idVendor),
le16_to_cpu(usb_dev->descriptor.idProduct),
@@ -962,7 +1068,7 @@
/* instance init */
instance = kzalloc(sizeof(*instance) + sizeof(struct urb *) * (num_rcv_urbs + num_snd_urbs), GFP_KERNEL);
if (!instance) {
- dev_dbg(dev, "%s: no memory for instance data!\n", __func__);
+ dev_err(dev, "%s: no memory for instance data!\n", __func__);
return -ENOMEM;
}
@@ -996,66 +1102,96 @@
snprintf(buf, length, ")");
bind:
- need_heavy = 1;
- if (driver->bind && (error = driver->bind(instance, intf, id, &need_heavy)) < 0) {
- dev_dbg(dev, "%s: bind failed: %d!\n", __func__, error);
+ if (driver->bind && (error = driver->bind(instance, intf, id)) < 0) {
+ dev_err(dev, "%s: bind failed: %d!\n", __func__, error);
goto fail_free;
}
/* private fields */
kref_init(&instance->refcount); /* dropped in usbatm_usb_disconnect */
- init_MUTEX(&instance->serialize);
+ mutex_init(&instance->serialize);
instance->thread_pid = -1;
init_completion(&instance->thread_started);
init_completion(&instance->thread_exited);
INIT_LIST_HEAD(&instance->vcc_list);
+ skb_queue_head_init(&instance->sndqueue);
usbatm_init_channel(&instance->rx_channel);
usbatm_init_channel(&instance->tx_channel);
tasklet_init(&instance->rx_channel.tasklet, usbatm_rx_process, (unsigned long)instance);
tasklet_init(&instance->tx_channel.tasklet, usbatm_tx_process, (unsigned long)instance);
- instance->rx_channel.endpoint = usb_rcvbulkpipe(usb_dev, driver->in);
- instance->tx_channel.endpoint = usb_sndbulkpipe(usb_dev, driver->out);
instance->rx_channel.stride = ATM_CELL_SIZE + driver->rx_padding;
instance->tx_channel.stride = ATM_CELL_SIZE + driver->tx_padding;
- instance->rx_channel.buf_size = rcv_buf_size * instance->rx_channel.stride;
- instance->tx_channel.buf_size = snd_buf_size * instance->tx_channel.stride;
instance->rx_channel.usbatm = instance->tx_channel.usbatm = instance;
- skb_queue_head_init(&instance->sndqueue);
+ if ((instance->flags & UDSL_USE_ISOC) && driver->isoc_in)
+ instance->rx_channel.endpoint = usb_rcvisocpipe(usb_dev, driver->isoc_in);
+ else
+ instance->rx_channel.endpoint = usb_rcvbulkpipe(usb_dev, driver->bulk_in);
+
+ instance->tx_channel.endpoint = usb_sndbulkpipe(usb_dev, driver->bulk_out);
+
+ /* tx buffer size must be a positive multiple of the stride */
+ instance->tx_channel.buf_size = max (instance->tx_channel.stride,
+ snd_buf_bytes - (snd_buf_bytes % instance->tx_channel.stride));
+
+ /* rx buffer size must be a positive multiple of the endpoint maxpacket */
+ maxpacket = usb_maxpacket(usb_dev, instance->rx_channel.endpoint, 0);
+
+ if ((maxpacket < 1) || (maxpacket > UDSL_MAX_BUF_SIZE)) {
+ dev_err(dev, "%s: invalid endpoint %02x!\n", __func__,
+ usb_pipeendpoint(instance->rx_channel.endpoint));
+ error = -EINVAL;
+ goto fail_unbind;
+ }
+
+ num_packets = max (1U, (rcv_buf_bytes + maxpacket / 2) / maxpacket); /* round */
+
+ if (num_packets * maxpacket > UDSL_MAX_BUF_SIZE)
+ num_packets--;
+
+ instance->rx_channel.buf_size = num_packets * maxpacket;
+ instance->rx_channel.packet_size = maxpacket;
+
+#ifdef DEBUG
+ for (i = 0; i < 2; i++) {
+ struct usbatm_channel *channel = i ?
+ &instance->tx_channel : &instance->rx_channel;
+
+ dev_dbg(dev, "%s: using %d byte buffer for %s channel 0x%p\n", __func__, channel->buf_size, i ? "tx" : "rx", channel);
+ }
+#endif
+
+ /* initialize urbs */
for (i = 0; i < num_rcv_urbs + num_snd_urbs; i++) {
- struct urb *urb;
u8 *buffer;
- unsigned int iso_packets = 0, iso_size = 0;
struct usbatm_channel *channel = i < num_rcv_urbs ?
&instance->rx_channel : &instance->tx_channel;
+ struct urb *urb;
+ unsigned int iso_packets = usb_pipeisoc(channel->endpoint) ? channel->buf_size / channel->packet_size : 0;
- if (usb_pipeisoc(channel->endpoint)) {
- /* don't expect iso out endpoints */
- iso_size = usb_maxpacket(instance->usb_dev, channel->endpoint, 0);
- iso_size -= iso_size % channel->stride; /* alignment */
- BUG_ON(!iso_size);
- iso_packets = (channel->buf_size - 1) / iso_size + 1;
- }
+ UDSL_ASSERT(!usb_pipeisoc(channel->endpoint) || usb_pipein(channel->endpoint));
urb = usb_alloc_urb(iso_packets, GFP_KERNEL);
if (!urb) {
- dev_dbg(dev, "%s: no memory for urb %d!\n", __func__, i);
+ dev_err(dev, "%s: no memory for urb %d!\n", __func__, i);
+ error = -ENOMEM;
goto fail_unbind;
}
instance->urbs[i] = urb;
- buffer = kmalloc(channel->buf_size, GFP_KERNEL);
+ /* zero the tx padding to avoid leaking information */
+ buffer = kzalloc(channel->buf_size, GFP_KERNEL);
if (!buffer) {
- dev_dbg(dev, "%s: no memory for buffer %d!\n", __func__, i);
+ dev_err(dev, "%s: no memory for buffer %d!\n", __func__, i);
+ error = -ENOMEM;
goto fail_unbind;
}
- memset(buffer, 0, channel->buf_size);
usb_fill_bulk_urb(urb, instance->usb_dev, channel->endpoint,
buffer, channel->buf_size, usbatm_complete, channel);
@@ -1065,9 +1201,8 @@
urb->transfer_flags = URB_ISO_ASAP;
urb->number_of_packets = iso_packets;
for (j = 0; j < iso_packets; j++) {
- urb->iso_frame_desc[j].offset = iso_size * j;
- urb->iso_frame_desc[j].length = min_t(int, iso_size,
- channel->buf_size - urb->iso_frame_desc[j].offset);
+ urb->iso_frame_desc[j].offset = channel->packet_size * j;
+ urb->iso_frame_desc[j].length = channel->packet_size;
}
}
@@ -1079,7 +1214,17 @@
__func__, urb->transfer_buffer, urb->transfer_buffer_length, urb);
}
- if (need_heavy && driver->heavy_init) {
+ instance->cached_vpi = ATM_VPI_UNSPEC;
+ instance->cached_vci = ATM_VCI_UNSPEC;
+ instance->cell_buf = kmalloc(instance->rx_channel.stride, GFP_KERNEL);
+
+ if (!instance->cell_buf) {
+ dev_err(dev, "%s: no memory for cell buffer!\n", __func__);
+ error = -ENOMEM;
+ goto fail_unbind;
+ }
+
+ if (!(instance->flags & UDSL_SKIP_HEAVY_INIT) && driver->heavy_init) {
error = usbatm_heavy_init(instance);
} else {
complete(&instance->thread_exited); /* pretend that heavy_init was run */
@@ -1098,6 +1243,8 @@
if (instance->driver->unbind)
instance->driver->unbind(instance, intf);
fail_free:
+ kfree(instance->cell_buf);
+
for (i = 0; i < num_rcv_urbs + num_snd_urbs; i++) {
if (instance->urbs[i])
kfree(instance->urbs[i]->transfer_buffer);
@@ -1114,6 +1261,7 @@
{
struct device *dev = &intf->dev;
struct usbatm_data *instance = usb_get_intfdata(intf);
+ struct usbatm_vcc_data *vcc_data;
int i;
dev_dbg(dev, "%s entered\n", __func__);
@@ -1125,13 +1273,19 @@
usb_set_intfdata(intf, NULL);
- down(&instance->serialize);
+ mutex_lock(&instance->serialize);
+ instance->disconnected = 1;
if (instance->thread_pid >= 0)
kill_proc(instance->thread_pid, SIGTERM, 1);
- up(&instance->serialize);
+ mutex_unlock(&instance->serialize);
wait_for_completion(&instance->thread_exited);
+ mutex_lock(&instance->serialize);
+ list_for_each_entry(vcc_data, &instance->vcc_list, list)
+ vcc_release_async(vcc_data->vcc, -EPIPE);
+ mutex_unlock(&instance->serialize);
+
tasklet_disable(&instance->rx_channel.tasklet);
tasklet_disable(&instance->tx_channel.tasklet);
@@ -1141,6 +1295,14 @@
del_timer_sync(&instance->rx_channel.delay);
del_timer_sync(&instance->tx_channel.delay);
+ /* turn usbatm_[rt]x_process into something close to a no-op */
+ /* no need to take the spinlock */
+ INIT_LIST_HEAD(&instance->rx_channel.list);
+ INIT_LIST_HEAD(&instance->tx_channel.list);
+
+ tasklet_enable(&instance->rx_channel.tasklet);
+ tasklet_enable(&instance->tx_channel.tasklet);
+
if (instance->atm_dev && instance->driver->atm_stop)
instance->driver->atm_stop(instance, instance->atm_dev);
@@ -1149,19 +1311,13 @@
instance->driver_data = NULL;
- /* turn usbatm_[rt]x_process into noop */
- /* no need to take the spinlock */
- INIT_LIST_HEAD(&instance->rx_channel.list);
- INIT_LIST_HEAD(&instance->tx_channel.list);
-
- tasklet_enable(&instance->rx_channel.tasklet);
- tasklet_enable(&instance->tx_channel.tasklet);
-
for (i = 0; i < num_rcv_urbs + num_snd_urbs; i++) {
kfree(instance->urbs[i]->transfer_buffer);
usb_free_urb(instance->urbs[i]);
}
+ kfree(instance->cell_buf);
+
/* ATM finalize */
if (instance->atm_dev)
atm_dev_deregister(instance->atm_dev);
@@ -1186,10 +1342,10 @@
if ((num_rcv_urbs > UDSL_MAX_RCV_URBS)
|| (num_snd_urbs > UDSL_MAX_SND_URBS)
- || (rcv_buf_size < 1)
- || (rcv_buf_size > UDSL_MAX_RCV_BUF_SIZE)
- || (snd_buf_size < 1)
- || (snd_buf_size > UDSL_MAX_SND_BUF_SIZE))
+ || (rcv_buf_bytes < 1)
+ || (rcv_buf_bytes > UDSL_MAX_BUF_SIZE)
+ || (snd_buf_bytes < 1)
+ || (snd_buf_bytes > UDSL_MAX_BUF_SIZE))
return -EINVAL;
return 0;
diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h
index 1adacd6..ff8551e 100644
--- a/drivers/usb/atm/usbatm.h
+++ b/drivers/usb/atm/usbatm.h
@@ -24,21 +24,21 @@
#ifndef _USBATM_H_
#define _USBATM_H_
-#include <linux/config.h>
-
-/*
-#define VERBOSE_DEBUG
-*/
-
#include <asm/semaphore.h>
#include <linux/atm.h>
#include <linux/atmdev.h>
#include <linux/completion.h>
#include <linux/device.h>
+#include <linux/kernel.h>
#include <linux/kref.h>
#include <linux/list.h>
#include <linux/stringify.h>
#include <linux/usb.h>
+#include <linux/mutex.h>
+
+/*
+#define VERBOSE_DEBUG
+*/
#ifdef DEBUG
#define UDSL_ASSERT(x) BUG_ON(!(x))
@@ -52,8 +52,13 @@
dev_info(&(instance)->usb_intf->dev , format , ## arg)
#define usb_warn(instance, format, arg...) \
dev_warn(&(instance)->usb_intf->dev , format , ## arg)
+#ifdef DEBUG
#define usb_dbg(instance, format, arg...) \
- dev_dbg(&(instance)->usb_intf->dev , format , ## arg)
+ dev_printk(KERN_DEBUG , &(instance)->usb_intf->dev , format , ## arg)
+#else
+#define usb_dbg(instance, format, arg...) \
+ do {} while (0)
+#endif
/* FIXME: move to dev_* once ATM is driver model aware */
#define atm_printk(level, instance, format, arg...) \
@@ -69,12 +74,24 @@
#ifdef DEBUG
#define atm_dbg(instance, format, arg...) \
atm_printk(KERN_DEBUG, instance , format , ## arg)
+#define atm_rldbg(instance, format, arg...) \
+ if (printk_ratelimit()) \
+ atm_printk(KERN_DEBUG, instance , format , ## arg)
#else
#define atm_dbg(instance, format, arg...) \
do {} while (0)
+#define atm_rldbg(instance, format, arg...) \
+ do {} while (0)
#endif
+/* flags, set by mini-driver in bind() */
+
+#define UDSL_SKIP_HEAVY_INIT (1<<0)
+#define UDSL_USE_ISOC (1<<1)
+#define UDSL_IGNORE_EILSEQ (1<<2)
+
+
/* mini driver */
struct usbatm_data;
@@ -86,16 +103,11 @@
*/
struct usbatm_driver {
- struct module *owner;
-
const char *driver_name;
- /*
- * init device ... can sleep, or cause probe() failure. Drivers with a heavy_init
- * method can avoid having it called by setting need_heavy_init to zero.
- */
+ /* init device ... can sleep, or cause probe() failure */
int (*bind) (struct usbatm_data *, struct usb_interface *,
- const struct usb_device_id *id, int *need_heavy_init);
+ const struct usb_device_id *id);
/* additional device initialization that is too slow to be done in probe() */
int (*heavy_init) (struct usbatm_data *, struct usb_interface *);
@@ -109,8 +121,9 @@
/* cleanup ATM device ... can sleep, but can't fail */
void (*atm_stop) (struct usbatm_data *, struct atm_dev *);
- int in; /* rx endpoint */
- int out; /* tx endpoint */
+ int bulk_in; /* bulk rx endpoint */
+ int isoc_in; /* isochronous rx endpoint */
+ int bulk_out; /* bulk tx endpoint */
unsigned rx_padding;
unsigned tx_padding;
@@ -125,6 +138,7 @@
int endpoint; /* usb pipe */
unsigned int stride; /* ATM cell size + padding */
unsigned int buf_size; /* urb buffer size */
+ unsigned int packet_size; /* endpoint maxpacket */
spinlock_t lock;
struct list_head list;
struct tasklet_struct tasklet;
@@ -143,6 +157,7 @@
struct usbatm_driver *driver;
void *driver_data;
char driver_name[16];
+ unsigned int flags; /* set by mini-driver in bind() */
/* USB device */
struct usb_device *usb_dev;
@@ -157,7 +172,8 @@
********************************/
struct kref refcount;
- struct semaphore serialize;
+ struct mutex serialize;
+ int disconnected;
/* heavy init */
int thread_pid;
@@ -171,7 +187,14 @@
struct usbatm_channel tx_channel;
struct sk_buff_head sndqueue;
- struct sk_buff *current_skb; /* being emptied */
+ struct sk_buff *current_skb; /* being emptied */
+
+ struct usbatm_vcc_data *cached_vcc;
+ int cached_vci;
+ short cached_vpi;
+
+ unsigned char *cell_buf; /* holds partial rx cell */
+ unsigned int buf_usage;
struct urb *urbs[0];
};
diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c
index 5c76e3a..42d6823 100644
--- a/drivers/usb/atm/xusbatm.c
+++ b/drivers/usb/atm/xusbatm.c
@@ -41,6 +41,8 @@
XUSBATM_PARM(tx_endpoint, unsigned char, byte, "tx endpoint number");
XUSBATM_PARM(rx_padding, unsigned char, byte, "rx padding (default 0)");
XUSBATM_PARM(tx_padding, unsigned char, byte, "tx padding (default 0)");
+XUSBATM_PARM(rx_altsetting, unsigned char, byte, "rx altsetting (default 0)");
+XUSBATM_PARM(tx_altsetting, unsigned char, byte, "rx altsetting (default 0)");
static const char xusbatm_driver_name[] = "xusbatm";
@@ -48,82 +50,118 @@
static struct usb_device_id xusbatm_usb_ids[XUSBATM_DRIVERS_MAX + 1];
static struct usb_driver xusbatm_usb_driver;
-static int usb_intf_has_ep(const struct usb_interface *intf, u8 ep)
+static struct usb_interface *xusbatm_find_intf (struct usb_device *usb_dev, int altsetting, u8 ep)
{
+ struct usb_host_interface *alt;
+ struct usb_interface *intf;
int i, j;
- for (i = 0; i < intf->num_altsetting; i++) {
- struct usb_host_interface *alt = intf->altsetting;
- for (j = 0; j < alt->desc.bNumEndpoints; j++)
- if ((alt->endpoint[i].desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) == ep)
- return 1;
+ for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++)
+ if ((intf = usb_dev->actconfig->interface[i]) && (alt = usb_altnum_to_altsetting(intf, altsetting)))
+ for (j = 0; j < alt->desc.bNumEndpoints; j++)
+ if (alt->endpoint[j].desc.bEndpointAddress == ep)
+ return intf;
+ return NULL;
+}
+
+static int xusbatm_capture_intf (struct usbatm_data *usbatm, struct usb_device *usb_dev,
+ struct usb_interface *intf, int altsetting, int claim)
+{
+ int ifnum = intf->altsetting->desc.bInterfaceNumber;
+ int ret;
+
+ if (claim && (ret = usb_driver_claim_interface(&xusbatm_usb_driver, intf, usbatm))) {
+ usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, ifnum, ret);
+ return ret;
+ }
+ if ((ret = usb_set_interface(usb_dev, ifnum, altsetting))) {
+ usb_err(usbatm, "%s: altsetting %2d for interface %2d failed (%d)!\n", __func__, altsetting, ifnum, ret);
+ return ret;
}
return 0;
}
-static int xusbatm_bind(struct usbatm_data *usbatm_instance,
- struct usb_interface *intf, const struct usb_device_id *id,
- int *need_heavy_init)
+static void xusbatm_release_intf (struct usb_device *usb_dev, struct usb_interface *intf, int claimed)
+{
+ if (claimed) {
+ usb_set_intfdata(intf, NULL);
+ usb_driver_release_interface(&xusbatm_usb_driver, intf);
+ }
+}
+
+static int xusbatm_bind(struct usbatm_data *usbatm,
+ struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *usb_dev = interface_to_usbdev(intf);
int drv_ix = id - xusbatm_usb_ids;
- int rx_ep_present = usb_intf_has_ep(intf, rx_endpoint[drv_ix]);
- int tx_ep_present = usb_intf_has_ep(intf, tx_endpoint[drv_ix]);
- u8 searched_ep = rx_ep_present ? tx_endpoint[drv_ix] : rx_endpoint[drv_ix];
- int i, ret;
+ int rx_alt = rx_altsetting[drv_ix];
+ int tx_alt = tx_altsetting[drv_ix];
+ struct usb_interface *rx_intf = xusbatm_find_intf(usb_dev, rx_alt, rx_endpoint[drv_ix]);
+ struct usb_interface *tx_intf = xusbatm_find_intf(usb_dev, tx_alt, tx_endpoint[drv_ix]);
+ int ret;
- usb_dbg(usbatm_instance, "%s: binding driver %d: vendor %#x product %#x"
- " rx: ep %#x padd %d tx: ep %#x padd %d\n",
+ usb_dbg(usbatm, "%s: binding driver %d: vendor %04x product %04x"
+ " rx: ep %02x padd %d alt %2d tx: ep %02x padd %d alt %2d\n",
__func__, drv_ix, vendor[drv_ix], product[drv_ix],
- rx_endpoint[drv_ix], rx_padding[drv_ix],
- tx_endpoint[drv_ix], tx_padding[drv_ix]);
+ rx_endpoint[drv_ix], rx_padding[drv_ix], rx_alt,
+ tx_endpoint[drv_ix], tx_padding[drv_ix], tx_alt);
- if (!rx_ep_present && !tx_ep_present) {
- usb_dbg(usbatm_instance, "%s: intf #%d has neither rx (%#x) nor tx (%#x) endpoint\n",
- __func__, intf->altsetting->desc.bInterfaceNumber,
- rx_endpoint[drv_ix], tx_endpoint[drv_ix]);
+ if (!rx_intf || !tx_intf) {
+ if (!rx_intf)
+ usb_dbg(usbatm, "%s: no interface contains endpoint %02x in altsetting %2d\n",
+ __func__, rx_endpoint[drv_ix], rx_alt);
+ if (!tx_intf)
+ usb_dbg(usbatm, "%s: no interface contains endpoint %02x in altsetting %2d\n",
+ __func__, tx_endpoint[drv_ix], tx_alt);
return -ENODEV;
}
- if (rx_ep_present && tx_ep_present)
- return 0;
+ if ((rx_intf != intf) && (tx_intf != intf))
+ return -ENODEV;
- for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) {
- struct usb_interface *cur_if = usb_dev->actconfig->interface[i];
-
- if (cur_if != intf && usb_intf_has_ep(cur_if, searched_ep)) {
- ret = usb_driver_claim_interface(&xusbatm_usb_driver,
- cur_if, usbatm_instance);
- if (!ret)
- usb_err(usbatm_instance, "%s: failed to claim interface #%d (%d)\n",
- __func__, cur_if->altsetting->desc.bInterfaceNumber, ret);
- return ret;
- }
+ if ((rx_intf == tx_intf) && (rx_alt != tx_alt)) {
+ usb_err(usbatm, "%s: altsettings clash on interface %2d (%2d vs %2d)!\n", __func__,
+ rx_intf->altsetting->desc.bInterfaceNumber, rx_alt, tx_alt);
+ return -EINVAL;
}
- usb_err(usbatm_instance, "%s: no interface has endpoint %#x\n",
- __func__, searched_ep);
- return -ENODEV;
+ usb_dbg(usbatm, "%s: rx If#=%2d; tx If#=%2d\n", __func__,
+ rx_intf->altsetting->desc.bInterfaceNumber,
+ tx_intf->altsetting->desc.bInterfaceNumber);
+
+ if ((ret = xusbatm_capture_intf(usbatm, usb_dev, rx_intf, rx_alt, rx_intf != intf)))
+ return ret;
+
+ if ((tx_intf != rx_intf) && (ret = xusbatm_capture_intf(usbatm, usb_dev, tx_intf, tx_alt, tx_intf != intf))) {
+ xusbatm_release_intf(usb_dev, rx_intf, rx_intf != intf);
+ return ret;
+ }
+
+ return 0;
}
-static void xusbatm_unbind(struct usbatm_data *usbatm_instance,
+static void xusbatm_unbind(struct usbatm_data *usbatm,
struct usb_interface *intf)
{
struct usb_device *usb_dev = interface_to_usbdev(intf);
int i;
- usb_dbg(usbatm_instance, "%s entered\n", __func__);
+
+ usb_dbg(usbatm, "%s entered\n", __func__);
for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) {
- struct usb_interface *cur_if = usb_dev->actconfig->interface[i];
- usb_set_intfdata(cur_if, NULL);
- usb_driver_release_interface(&xusbatm_usb_driver, cur_if);
+ struct usb_interface *cur_intf = usb_dev->actconfig->interface[i];
+
+ if (cur_intf && (usb_get_intfdata(cur_intf) == usbatm)) {
+ usb_set_intfdata(cur_intf, NULL);
+ usb_driver_release_interface(&xusbatm_usb_driver, cur_intf);
+ }
}
}
-static int xusbatm_atm_start(struct usbatm_data *usbatm_instance,
+static int xusbatm_atm_start(struct usbatm_data *usbatm,
struct atm_dev *atm_dev)
{
- atm_dbg(usbatm_instance, "%s entered\n", __func__);
+ atm_dbg(usbatm, "%s entered\n", __func__);
/* use random MAC as we've no way to get it from the device */
random_ether_addr(atm_dev->esi);
@@ -161,18 +199,19 @@
}
for (i = 0; i < num_vendor; i++) {
+ rx_endpoint[i] |= USB_DIR_IN;
+ tx_endpoint[i] &= USB_ENDPOINT_NUMBER_MASK;
+
xusbatm_usb_ids[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
xusbatm_usb_ids[i].idVendor = vendor[i];
xusbatm_usb_ids[i].idProduct = product[i];
-
- xusbatm_drivers[i].owner = THIS_MODULE;
xusbatm_drivers[i].driver_name = xusbatm_driver_name;
xusbatm_drivers[i].bind = xusbatm_bind;
xusbatm_drivers[i].unbind = xusbatm_unbind;
xusbatm_drivers[i].atm_start = xusbatm_atm_start;
- xusbatm_drivers[i].in = rx_endpoint[i];
- xusbatm_drivers[i].out = tx_endpoint[i];
+ xusbatm_drivers[i].bulk_in = rx_endpoint[i];
+ xusbatm_drivers[i].bulk_out = tx_endpoint[i];
xusbatm_drivers[i].rx_padding = rx_padding[i];
xusbatm_drivers[i].tx_padding = tx_padding[i];
}
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index b9fd39f..97bdeb1 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1014,8 +1014,13 @@
}
down(&open_sem);
+ if (!usb_get_intfdata(intf)) {
+ up(&open_sem);
+ return;
+ }
acm->dev = NULL;
- usb_set_intfdata (intf, NULL);
+ usb_set_intfdata(acm->control, NULL);
+ usb_set_intfdata(acm->data, NULL);
tasklet_disable(&acm->urb_task);
@@ -1036,7 +1041,7 @@
for (i = 0; i < ACM_NRB; i++)
usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma);
- usb_driver_release_interface(&acm_driver, acm->data);
+ usb_driver_release_interface(&acm_driver, intf == acm->control ? acm->data : intf);
if (!acm->used) {
acm_tty_unregister(acm);
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index dba4cc0..d34848a 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -7,6 +7,7 @@
* Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
# Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com>
# Copyright (c) 2001 David Paschal <paschal@rcsis.com>
+ * Copyright (c) 2006 Oliver Neukum <oliver@neukum.name>
*
* USB Printer Device Class driver for USB printers and printer cables
*
@@ -273,13 +274,16 @@
{
struct usblp *usblp = urb->context;
- if (!usblp || !usblp->dev || !usblp->used || !usblp->present)
+ if (unlikely(!usblp || !usblp->dev || !usblp->used))
return;
+ if (unlikely(!usblp->present))
+ goto unplug;
if (unlikely(urb->status))
warn("usblp%d: nonzero read/write bulk status received: %d",
usblp->minor, urb->status);
usblp->rcomplete = 1;
+unplug:
wake_up_interruptible(&usblp->wait);
}
@@ -287,13 +291,15 @@
{
struct usblp *usblp = urb->context;
- if (!usblp || !usblp->dev || !usblp->used || !usblp->present)
+ if (unlikely(!usblp || !usblp->dev || !usblp->used))
return;
-
+ if (unlikely(!usblp->present))
+ goto unplug;
if (unlikely(urb->status))
warn("usblp%d: nonzero read/write bulk status received: %d",
usblp->minor, urb->status);
usblp->wcomplete = 1;
+unplug:
wake_up_interruptible(&usblp->wait);
}
@@ -627,9 +633,8 @@
static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
{
- DECLARE_WAITQUEUE(wait, current);
struct usblp *usblp = file->private_data;
- int timeout, err = 0, transfer_length = 0;
+ int timeout, rv, err = 0, transfer_length = 0;
size_t writecount = 0;
while (writecount < count) {
@@ -641,24 +646,11 @@
}
timeout = USBLP_WRITE_TIMEOUT;
- add_wait_queue(&usblp->wait, &wait);
- while ( 1==1 ) {
- if (signal_pending(current)) {
- remove_wait_queue(&usblp->wait, &wait);
- return writecount ? writecount : -EINTR;
- }
- set_current_state(TASK_INTERRUPTIBLE);
- if (timeout && !usblp->wcomplete) {
- timeout = schedule_timeout(timeout);
- } else {
- set_current_state(TASK_RUNNING);
- break;
- }
- }
- remove_wait_queue(&usblp->wait, &wait);
+ rv = wait_event_interruptible_timeout(usblp->wait, usblp->wcomplete || !usblp->present , timeout);
+ if (rv < 0)
+ return writecount ? writecount : -EINTR;
}
-
down (&usblp->sem);
if (!usblp->present) {
up (&usblp->sem);
@@ -724,7 +716,7 @@
static ssize_t usblp_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
{
struct usblp *usblp = file->private_data;
- DECLARE_WAITQUEUE(wait, current);
+ int rv;
if (!usblp->bidir)
return -EINVAL;
@@ -742,26 +734,13 @@
count = -EAGAIN;
goto done;
}
-
- add_wait_queue(&usblp->wait, &wait);
- while (1==1) {
- if (signal_pending(current)) {
- count = -EINTR;
- remove_wait_queue(&usblp->wait, &wait);
- goto done;
- }
- up (&usblp->sem);
- set_current_state(TASK_INTERRUPTIBLE);
- if (!usblp->rcomplete) {
- schedule();
- } else {
- set_current_state(TASK_RUNNING);
- down(&usblp->sem);
- break;
- }
- down (&usblp->sem);
+ up(&usblp->sem);
+ rv = wait_event_interruptible(usblp->wait, usblp->rcomplete || !usblp->present);
+ down(&usblp->sem);
+ if (rv < 0) {
+ count = -EINTR;
+ goto done;
}
- remove_wait_queue(&usblp->wait, &wait);
}
if (!usblp->present) {
@@ -874,11 +853,10 @@
/* Malloc and start initializing usblp structure so we can use it
* directly. */
- if (!(usblp = kmalloc(sizeof(struct usblp), GFP_KERNEL))) {
+ if (!(usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL))) {
err("out of memory for usblp");
goto abort;
}
- memset(usblp, 0, sizeof(struct usblp));
usblp->dev = dev;
init_MUTEX (&usblp->sem);
init_waitqueue_head(&usblp->wait);
@@ -1214,10 +1192,9 @@
{
int retval;
retval = usb_register(&usblp_driver);
- if (retval)
- goto out;
- info(DRIVER_VERSION ": " DRIVER_DESC);
-out:
+ if (!retval)
+ info(DRIVER_VERSION ": " DRIVER_DESC);
+
return retval;
}
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 076462c..dce9d98 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -378,7 +378,7 @@
return NULL;
}
-EXPORT_SYMBOL_GPL(usb_match_id);
+EXPORT_SYMBOL(usb_match_id);
int usb_device_match(struct device *dev, struct device_driver *drv)
{
@@ -446,7 +446,7 @@
return retval;
}
-EXPORT_SYMBOL_GPL(usb_register_driver);
+EXPORT_SYMBOL(usb_register_driver);
/**
* usb_deregister - unregister a USB driver
@@ -469,4 +469,4 @@
usbfs_update_special();
}
-EXPORT_SYMBOL_GPL(usb_deregister);
+EXPORT_SYMBOL(usb_deregister);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 319de03..7135e54 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -13,6 +13,7 @@
#include <linux/ctype.h>
#include <linux/device.h>
#include <asm/byteorder.h>
+#include <asm/scatterlist.h>
#include "hcd.h" /* for usbcore internals */
#include "usb.h"
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 0817967..dad4d8f 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -468,6 +468,7 @@
*/
void usb_kill_urb(struct urb *urb)
{
+ might_sleep();
if (!(urb && urb->dev && urb->dev->bus && urb->dev->bus->op))
return;
spin_lock_irq(&urb->lock);
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 9a4edc5..0aab7d2 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -135,6 +135,7 @@
setup_out_ready : 1,
setup_out_error : 1,
setup_abort : 1;
+ unsigned setup_wLength;
/* the rest is basically write-once */
struct usb_config_descriptor *config, *hs_config;
@@ -942,6 +943,7 @@
}
req->complete = ep0_complete;
req->length = len;
+ req->zero = 0;
return 0;
}
@@ -1161,10 +1163,13 @@
spin_unlock_irq (&dev->lock);
if (copy_from_user (dev->req->buf, buf, len))
retval = -EFAULT;
- else
+ else {
+ if (len < dev->setup_wLength)
+ dev->req->zero = 1;
retval = usb_ep_queue (
dev->gadget->ep0, dev->req,
GFP_KERNEL);
+ }
if (retval < 0) {
spin_lock_irq (&dev->lock);
clean_req (dev->gadget->ep0, dev->req);
@@ -1483,6 +1488,7 @@
delegate:
dev->setup_in = (ctrl->bRequestType & USB_DIR_IN)
? 1 : 0;
+ dev->setup_wLength = w_length;
dev->setup_out_ready = 0;
dev->setup_out_error = 0;
value = 0;
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index c32e1f7..67b13ab 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -47,6 +47,7 @@
#include <linux/config.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ioport.h>
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 2fc110d..ae7a1c0 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -165,8 +165,8 @@
static unsigned qlen = 32;
static unsigned pattern = 0;
-module_param (buflen, uint, S_IRUGO|S_IWUSR);
-module_param (qlen, uint, S_IRUGO|S_IWUSR);
+module_param (buflen, uint, S_IRUGO);
+module_param (qlen, uint, S_IRUGO);
module_param (pattern, uint, S_IRUGO|S_IWUSR);
/*
@@ -1127,8 +1127,10 @@
DBG (dev, "unbind\n");
/* we've already been disconnected ... no i/o is active */
- if (dev->req)
+ if (dev->req) {
+ dev->req->length = USB_BUFSIZ;
free_ep_req (gadget->ep0, dev->req);
+ }
del_timer_sync (&dev->resume);
kfree (dev);
set_gadget_data (gadget, NULL);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 08ca0f8..3a6687d 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -24,46 +24,11 @@
/*-------------------------------------------------------------------------*/
-/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/...
- * off the controller (maybe it can boot from highspeed USB disks).
- */
-static int bios_handoff(struct ehci_hcd *ehci, int where, u32 cap)
-{
- struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
-
- /* always say Linux will own the hardware */
- pci_write_config_byte(pdev, where + 3, 1);
-
- /* maybe wait a while for BIOS to respond */
- if (cap & (1 << 16)) {
- int msec = 5000;
-
- do {
- msleep(10);
- msec -= 10;
- pci_read_config_dword(pdev, where, &cap);
- } while ((cap & (1 << 16)) && msec);
- if (cap & (1 << 16)) {
- ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n",
- where, cap);
- // some BIOS versions seem buggy...
- // return 1;
- ehci_warn(ehci, "continuing after BIOS bug...\n");
- /* disable all SMIs, and clear "BIOS owns" flag */
- pci_write_config_dword(pdev, where + 4, 0);
- pci_write_config_byte(pdev, where + 2, 0);
- } else
- ehci_dbg(ehci, "BIOS handoff succeeded\n");
- }
- return 0;
-}
-
/* called after powerup, by probe or system-pm "wakeup" */
static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
{
u32 temp;
int retval;
- unsigned count = 256/4;
/* optional debug port, normally in the first BAR */
temp = pci_find_capability(pdev, 0x0a);
@@ -84,32 +49,9 @@
}
}
- temp = HCC_EXT_CAPS(readl(&ehci->caps->hcc_params));
-
- /* EHCI 0.96 and later may have "extended capabilities" */
- while (temp && count--) {
- u32 cap;
-
- pci_read_config_dword(pdev, temp, &cap);
- ehci_dbg(ehci, "capability %04x at %02x\n", cap, temp);
- switch (cap & 0xff) {
- case 1: /* BIOS/SMM/... handoff */
- if (bios_handoff(ehci, temp, cap) != 0)
- return -EOPNOTSUPP;
- break;
- case 0: /* illegal reserved capability */
- ehci_dbg(ehci, "illegal capability!\n");
- cap = 0;
- /* FALLTHROUGH */
- default: /* unknown */
- break;
- }
- temp = (cap >> 8) & 0xff;
- }
- if (!count) {
- ehci_err(ehci, "bogus capabilities ... PCI problems!\n");
- return -EIO;
- }
+ /* we expect static quirk code to handle the "extended capabilities"
+ * (currently just BIOS handoff) allowed starting with EHCI 0.96
+ */
/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
retval = pci_set_mwi(pdev);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 57e7737..ebcca97 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1063,6 +1063,7 @@
/* for IN, check CSPLIT */
if (stream->c_usecs) {
+ uf = uframe & 7;
max_used = 100 - stream->c_usecs;
do {
tmp = 1 << uf;
@@ -1843,8 +1844,7 @@
#else
static inline int
-sitd_submit (struct ehci_hcd *ehci, struct urb *urb,
- unsigned mem_flags)
+sitd_submit (struct ehci_hcd *ehci, struct urb *urb, gfp_t mem_flags)
{
ehci_dbg (ehci, "split iso support is disabled\n");
return -ENOSYS;
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 584b8dc..972ce04 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1420,20 +1420,22 @@
int ret = 0;
spin_lock_irqsave(&isp116x->lock, flags);
-
val = isp116x_read_reg32(isp116x, HCCONTROL);
+
switch (val & HCCONTROL_HCFS) {
case HCCONTROL_USB_OPER:
+ spin_unlock_irqrestore(&isp116x->lock, flags);
val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE);
val |= HCCONTROL_USB_SUSPEND;
if (device_may_wakeup(&hcd->self.root_hub->dev))
val |= HCCONTROL_RWE;
/* Wait for usb transfers to finish */
- mdelay(2);
+ msleep(2);
+ spin_lock_irqsave(&isp116x->lock, flags);
isp116x_write_reg32(isp116x, HCCONTROL, val);
+ spin_unlock_irqrestore(&isp116x->lock, flags);
/* Wait for devices to suspend */
- mdelay(5);
- case HCCONTROL_USB_SUSPEND:
+ msleep(5);
break;
case HCCONTROL_USB_RESUME:
isp116x_write_reg32(isp116x, HCCONTROL,
@@ -1441,12 +1443,11 @@
HCCONTROL_USB_RESET);
case HCCONTROL_USB_RESET:
ret = -EBUSY;
+ default: /* HCCONTROL_USB_SUSPEND */
+ spin_unlock_irqrestore(&isp116x->lock, flags);
break;
- default:
- ret = -EINVAL;
}
- spin_unlock_irqrestore(&isp116x->lock, flags);
return ret;
}
@@ -1715,9 +1716,9 @@
.remove = isp116x_remove,
.suspend = isp116x_suspend,
.resume = isp116x_resume,
- .driver = {
- .name = (char *)hcd_name,
- },
+ .driver = {
+ .name = (char *)hcd_name,
+ },
};
/*-----------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 77cd6ac..db280ca 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -67,7 +67,7 @@
": stopping Au1xxx OHCI USB Controller\n");
/* Disable clock */
- au_writel(readl((void *)USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
+ au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
}
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 3ef2c0c..e9e5bc1 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -190,7 +190,7 @@
msleep(10);
}
if (wait_time <= 0)
- printk(KERN_WARNING "%s %s: early BIOS handoff "
+ printk(KERN_WARNING "%s %s: BIOS handoff "
"failed (BIOS bug ?)\n",
pdev->dev.bus_id, "OHCI");
@@ -212,8 +212,9 @@
{
int wait_time, delta;
void __iomem *base, *op_reg_base;
- u32 hcc_params, val, temp;
- u8 cap_length;
+ u32 hcc_params, val;
+ u8 offset, cap_length;
+ int count = 256/4;
if (!mmio_resource_enabled(pdev, 0))
return;
@@ -224,51 +225,80 @@
cap_length = readb(base);
op_reg_base = base + cap_length;
- hcc_params = readl(base + EHCI_HCC_PARAMS);
- hcc_params = (hcc_params >> 8) & 0xff;
- if (hcc_params) {
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- &val);
- if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
- /*
- * Ok, BIOS is in smm mode, try to hand off...
- */
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- &temp);
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- temp | EHCI_USBLEGCTLSTS_SOOE);
- val |= EHCI_USBLEGSUP_OS;
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- val);
- wait_time = 500;
- do {
- msleep(10);
- wait_time -= 10;
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- &val);
- } while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
- if (!wait_time) {
- /*
- * well, possibly buggy BIOS...
+ /* EHCI 0.96 and later may have "extended capabilities"
+ * spec section 5.1 explains the bios handoff, e.g. for
+ * booting from USB disk or using a usb keyboard
+ */
+ hcc_params = readl(base + EHCI_HCC_PARAMS);
+ offset = (hcc_params >> 8) & 0xff;
+ while (offset && count--) {
+ u32 cap;
+ int msec;
+
+ pci_read_config_dword(pdev, offset, &cap);
+ switch (cap & 0xff) {
+ case 1: /* BIOS/SMM/... handoff support */
+ if ((cap & EHCI_USBLEGSUP_BIOS)) {
+ pr_debug("%s %s: BIOS handoff\n",
+ pdev->dev.bus_id, "EHCI");
+
+ /* BIOS workaround (?): be sure the
+ * pre-Linux code receives the SMI
*/
- printk(KERN_WARNING "%s %s: early BIOS handoff "
+ pci_read_config_dword(pdev,
+ offset + EHCI_USBLEGCTLSTS,
+ &val);
+ pci_write_config_dword(pdev,
+ offset + EHCI_USBLEGCTLSTS,
+ val | EHCI_USBLEGCTLSTS_SOOE);
+ }
+
+ /* always say Linux will own the hardware
+ * by setting EHCI_USBLEGSUP_OS.
+ */
+ pci_write_config_byte(pdev, offset + 3, 1);
+
+ /* if boot firmware now owns EHCI, spin till
+ * it hands it over.
+ */
+ msec = 5000;
+ while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
+ msleep(10);
+ msec -= 10;
+ pci_read_config_dword(pdev, offset, &cap);
+ }
+
+ if (cap & EHCI_USBLEGSUP_BIOS) {
+ /* well, possibly buggy BIOS... try to shut
+ * it down, and hope nothing goes too wrong
+ */
+ printk(KERN_WARNING "%s %s: BIOS handoff "
"failed (BIOS bug ?)\n",
pdev->dev.bus_id, "EHCI");
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- EHCI_USBLEGSUP_OS);
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- 0);
+ pci_write_config_byte(pdev, offset + 2, 0);
}
+
+ /* just in case, always disable EHCI SMIs */
+ pci_write_config_dword(pdev,
+ offset + EHCI_USBLEGCTLSTS,
+ 0);
+ break;
+ case 0: /* illegal reserved capability */
+ cap = 0;
+ /* FALLTHROUGH */
+ default:
+ printk(KERN_WARNING "%s %s: unrecognized "
+ "capability %02x\n",
+ pdev->dev.bus_id, "EHCI",
+ cap & 0xff);
+ break;
}
+ offset = (cap >> 8) & 0xff;
}
+ if (!count)
+ printk(KERN_DEBUG "%s %s: capability loop?\n",
+ pdev->dev.bus_id, "EHCI");
/*
* halt EHCI & disable its interrupts in any case
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index b607600..7823980 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -672,9 +672,9 @@
/* Low-speed transfers get a different queue, and won't hog the bus.
* Also, some devices enumerate better without FSBR; the easiest way
* to do that is to put URBs on the low-speed queue while the device
- * is in the DEFAULT state. */
+ * isn't in the CONFIGURED state. */
if (urb->dev->speed == USB_SPEED_LOW ||
- urb->dev->state == USB_STATE_DEFAULT)
+ urb->dev->state != USB_STATE_CONFIGURED)
skelqh = uhci->skel_ls_control_qh;
else {
skelqh = uhci->skel_fs_control_qh;
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index a91e72c..6f7a684 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1307,7 +1307,7 @@
}
if (err)
- warn("timeout initializing reports\n");
+ warn("timeout initializing reports");
}
#define USB_VENDOR_ID_WACOM 0x056a
@@ -1453,6 +1453,9 @@
#define USB_VENDOR_ID_CHERRY 0x046a
#define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023
+#define USB_VENDOR_ID_HP 0x03f0
+#define USB_DEVICE_ID_HP_USBHUB_KB 0x020c
+
/*
* Alphabetically sorted blacklist by quirk type.
*/
@@ -1566,6 +1569,7 @@
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_KEYBOARD, HID_QUIRK_NOGET},
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
+ { USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_POWERMOUSE, HID_QUIRK_2WHEEL_POWERMOUSE },
@@ -1828,9 +1832,6 @@
hid->urbctrl->transfer_dma = hid->ctrlbuf_dma;
hid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
- /* May be needed for some devices */
- usb_clear_halt(hid->dev, hid->urbin->pipe);
-
return hid;
fail:
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index 4dff847..925f5ab 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -35,7 +35,6 @@
#include <linux/usb.h>
#include "hid.h"
#include <linux/hiddev.h>
-#include <linux/devfs_fs_kernel.h>
#ifdef CONFIG_USB_DYNAMIC_MINORS
#define HIDDEV_MINOR_BASE 0
@@ -632,7 +631,7 @@
else if ((cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) &&
(uref_multi->num_values > HID_MAX_MULTI_USAGES ||
- uref->usage_index + uref_multi->num_values >= field->report_count))
+ uref->usage_index + uref_multi->num_values > field->report_count))
goto inval;
}
@@ -832,12 +831,10 @@
int __init hiddev_init(void)
{
- devfs_mk_dir("usb/hid");
return usb_register(&hiddev_driver);
}
void hiddev_exit(void)
{
usb_deregister(&hiddev_driver);
- devfs_remove("usb/hid");
}
diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c
index 3b3c7b4..697c5e5 100644
--- a/drivers/usb/input/touchkitusb.c
+++ b/drivers/usb/input/touchkitusb.c
@@ -337,6 +337,9 @@
touchkit->data, TOUCHKIT_REPORT_DATA_SIZE,
touchkit_irq, touchkit, endpoint->bInterval);
+ touchkit->irq->transfer_dma = touchkit->data_dma;
+ touchkit->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
input_register_device(touchkit->input);
usb_set_intfdata(intf, touchkit);
diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c
index 1bfc105..37d2f0b 100644
--- a/drivers/usb/input/yealink.c
+++ b/drivers/usb/input/yealink.c
@@ -59,7 +59,7 @@
#include "map_to_7segment.h"
#include "yealink.h"
-#define DRIVER_VERSION "yld-20050816"
+#define DRIVER_VERSION "yld-20051230"
#define DRIVER_AUTHOR "Henk Vergonet"
#define DRIVER_DESC "Yealink phone driver"
@@ -786,16 +786,25 @@
* Linux interface and usb initialisation
******************************************************************************/
-static const struct yld_device {
- u16 idVendor;
- u16 idProduct;
+struct driver_info {
char *name;
-} yld_device[] = {
- { 0x6993, 0xb001, "Yealink usb-p1k" },
};
-static struct usb_device_id usb_table [] = {
- { USB_INTERFACE_INFO(USB_CLASS_HID, 0, 0) },
+static const struct driver_info info_P1K = {
+ .name = "Yealink usb-p1k",
+};
+
+static const struct usb_device_id usb_table [] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x6993,
+ .idProduct = 0xb001,
+ .bInterfaceClass = USB_CLASS_HID,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ .driver_info = (kernel_ulong_t)&info_P1K
+ },
{ }
};
@@ -842,33 +851,16 @@
usb_cleanup(yld, 0);
}
-static int usb_match(struct usb_device *udev)
-{
- int i;
- u16 idVendor = le16_to_cpu(udev->descriptor.idVendor);
- u16 idProduct = le16_to_cpu(udev->descriptor.idProduct);
-
- for (i = 0; i < ARRAY_SIZE(yld_device); i++) {
- if ((idVendor == yld_device[i].idVendor) &&
- (idProduct == yld_device[i].idProduct))
- return i;
- }
- return -ENODEV;
-}
-
static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev (intf);
+ struct driver_info *nfo = (struct driver_info *)id->driver_info;
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct yealink_dev *yld;
struct input_dev *input_dev;
int ret, pipe, i;
- i = usb_match(udev);
- if (i < 0)
- return -ENODEV;
-
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
if (!(endpoint->bEndpointAddress & USB_DIR_IN))
@@ -915,7 +907,7 @@
pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
if (ret != USB_PKT_LEN)
- err("invalid payload size %d, expected %d", ret, USB_PKT_LEN);
+ err("invalid payload size %d, expected %zd", ret, USB_PKT_LEN);
/* initialise irq urb */
usb_fill_int_urb(yld->urb_irq, udev, pipe, yld->irq_data,
@@ -948,7 +940,7 @@
strlcat(yld->phys, "/input0", sizeof(yld->phys));
/* register settings for the input device */
- input_dev->name = yld_device[i].name;
+ input_dev->name = nfo->name;
input_dev->phys = yld->phys;
usb_to_input_id(udev, &input_dev->id);
input_dev->cdev.dev = &intf->dev;
diff --git a/drivers/usb/media/Kconfig b/drivers/usb/media/Kconfig
index 21232ee..0d3d2cc 100644
--- a/drivers/usb/media/Kconfig
+++ b/drivers/usb/media/Kconfig
@@ -53,6 +53,21 @@
To compile this driver as a module, choose M here: the
module will be called dsbr100.
+config USB_ET61X251
+ tristate "USB ET61X[12]51 PC Camera Controller support"
+ depends on USB && VIDEO_DEV
+ ---help---
+ Say Y here if you want support for cameras based on Etoms ET61X151
+ or ET61X251 PC Camera Controllers.
+
+ See <file:Documentation/usb/et61x251.txt> for more informations.
+
+ This driver uses the Video For Linux API. You must say Y or M to
+ "Video For Linux" to use this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called et61x251.
+
config USB_IBMCAM
tristate "USB IBM (Xirlink) C-it Camera support"
depends on USB && VIDEO_DEV
@@ -209,5 +224,3 @@
To compile this driver as a module, choose M here: the
module will be called pwc.
-
-
diff --git a/drivers/usb/media/Makefile b/drivers/usb/media/Makefile
index d83adff..3957aa1 100644
--- a/drivers/usb/media/Makefile
+++ b/drivers/usb/media/Makefile
@@ -3,9 +3,11 @@
#
sn9c102-objs := sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bcb.o sn9c102_tas5110c1b.o sn9c102_tas5130d1b.o
+et61x251-objs := et61x251_core.o et61x251_tas5130d1b.o
obj-$(CONFIG_USB_DABUSB) += dabusb.o
obj-$(CONFIG_USB_DSBR) += dsbr100.o
+obj-$(CONFIG_USB_ET61X251) += et61x251.o
obj-$(CONFIG_USB_IBMCAM) += ibmcam.o usbvideo.o ultracam.o
obj-$(CONFIG_USB_KONICAWC) += konicawc.o usbvideo.o
obj-$(CONFIG_USB_OV511) += ov511.o
diff --git a/drivers/usb/media/et61x251.h b/drivers/usb/media/et61x251.h
new file mode 100644
index 0000000..652238f
--- /dev/null
+++ b/drivers/usb/media/et61x251.h
@@ -0,0 +1,220 @@
+/***************************************************************************
+ * V4L2 driver for ET61X[12]51 PC Camera Controllers *
+ * *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the Free Software *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
+ ***************************************************************************/
+
+#ifndef _ET61X251_H_
+#define _ET61X251_H_
+
+#include <linux/version.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/time.h>
+#include <linux/wait.h>
+#include <linux/types.h>
+#include <linux/param.h>
+#include <linux/rwsem.h>
+#include <asm/semaphore.h>
+
+#include "et61x251_sensor.h"
+
+/*****************************************************************************/
+
+#define ET61X251_DEBUG
+#define ET61X251_DEBUG_LEVEL 2
+#define ET61X251_MAX_DEVICES 64
+#define ET61X251_PRESERVE_IMGSCALE 0
+#define ET61X251_FORCE_MUNMAP 0
+#define ET61X251_MAX_FRAMES 32
+#define ET61X251_COMPRESSION_QUALITY 0
+#define ET61X251_URBS 2
+#define ET61X251_ISO_PACKETS 7
+#define ET61X251_ALTERNATE_SETTING 13
+#define ET61X251_URB_TIMEOUT msecs_to_jiffies(2 * ET61X251_ISO_PACKETS)
+#define ET61X251_CTRL_TIMEOUT 100
+
+/*****************************************************************************/
+
+static const struct usb_device_id et61x251_id_table[] = {
+ { USB_DEVICE(0x102c, 0x6151), },
+ { USB_DEVICE(0x102c, 0x6251), },
+ { USB_DEVICE(0x102c, 0x6253), },
+ { USB_DEVICE(0x102c, 0x6254), },
+ { USB_DEVICE(0x102c, 0x6255), },
+ { USB_DEVICE(0x102c, 0x6256), },
+ { USB_DEVICE(0x102c, 0x6257), },
+ { USB_DEVICE(0x102c, 0x6258), },
+ { USB_DEVICE(0x102c, 0x6259), },
+ { USB_DEVICE(0x102c, 0x625a), },
+ { USB_DEVICE(0x102c, 0x625b), },
+ { USB_DEVICE(0x102c, 0x625c), },
+ { USB_DEVICE(0x102c, 0x625d), },
+ { USB_DEVICE(0x102c, 0x625e), },
+ { USB_DEVICE(0x102c, 0x625f), },
+ { USB_DEVICE(0x102c, 0x6260), },
+ { USB_DEVICE(0x102c, 0x6261), },
+ { USB_DEVICE(0x102c, 0x6262), },
+ { USB_DEVICE(0x102c, 0x6263), },
+ { USB_DEVICE(0x102c, 0x6264), },
+ { USB_DEVICE(0x102c, 0x6265), },
+ { USB_DEVICE(0x102c, 0x6266), },
+ { USB_DEVICE(0x102c, 0x6267), },
+ { USB_DEVICE(0x102c, 0x6268), },
+ { USB_DEVICE(0x102c, 0x6269), },
+ { }
+};
+
+ET61X251_SENSOR_TABLE
+
+/*****************************************************************************/
+
+enum et61x251_frame_state {
+ F_UNUSED,
+ F_QUEUED,
+ F_GRABBING,
+ F_DONE,
+ F_ERROR,
+};
+
+struct et61x251_frame_t {
+ void* bufmem;
+ struct v4l2_buffer buf;
+ enum et61x251_frame_state state;
+ struct list_head frame;
+ unsigned long vma_use_count;
+};
+
+enum et61x251_dev_state {
+ DEV_INITIALIZED = 0x01,
+ DEV_DISCONNECTED = 0x02,
+ DEV_MISCONFIGURED = 0x04,
+};
+
+enum et61x251_io_method {
+ IO_NONE,
+ IO_READ,
+ IO_MMAP,
+};
+
+enum et61x251_stream_state {
+ STREAM_OFF,
+ STREAM_INTERRUPT,
+ STREAM_ON,
+};
+
+struct et61x251_sysfs_attr {
+ u8 reg, i2c_reg;
+};
+
+struct et61x251_module_param {
+ u8 force_munmap;
+};
+
+static DECLARE_MUTEX(et61x251_sysfs_lock);
+static DECLARE_RWSEM(et61x251_disconnect);
+
+struct et61x251_device {
+ struct video_device* v4ldev;
+
+ struct et61x251_sensor* sensor;
+
+ struct usb_device* usbdev;
+ struct urb* urb[ET61X251_URBS];
+ void* transfer_buffer[ET61X251_URBS];
+ u8* control_buffer;
+
+ struct et61x251_frame_t *frame_current, frame[ET61X251_MAX_FRAMES];
+ struct list_head inqueue, outqueue;
+ u32 frame_count, nbuffers, nreadbuffers;
+
+ enum et61x251_io_method io;
+ enum et61x251_stream_state stream;
+
+ struct v4l2_jpegcompression compression;
+
+ struct et61x251_sysfs_attr sysfs;
+ struct et61x251_module_param module_param;
+
+ enum et61x251_dev_state state;
+ u8 users;
+
+ struct semaphore dev_sem, fileop_sem;
+ spinlock_t queue_lock;
+ wait_queue_head_t open, wait_frame, wait_stream;
+};
+
+/*****************************************************************************/
+
+void
+et61x251_attach_sensor(struct et61x251_device* cam,
+ struct et61x251_sensor* sensor)
+{
+ cam->sensor = sensor;
+ cam->sensor->usbdev = cam->usbdev;
+}
+
+/*****************************************************************************/
+
+#undef DBG
+#undef KDBG
+#ifdef ET61X251_DEBUG
+# define DBG(level, fmt, args...) \
+do { \
+ if (debug >= (level)) { \
+ if ((level) == 1) \
+ dev_err(&cam->usbdev->dev, fmt "\n", ## args); \
+ else if ((level) == 2) \
+ dev_info(&cam->usbdev->dev, fmt "\n", ## args); \
+ else if ((level) >= 3) \
+ dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \
+ __FUNCTION__, __LINE__ , ## args); \
+ } \
+} while (0)
+# define KDBG(level, fmt, args...) \
+do { \
+ if (debug >= (level)) { \
+ if ((level) == 1 || (level) == 2) \
+ pr_info("et61x251: " fmt "\n", ## args); \
+ else if ((level) == 3) \
+ pr_debug("et61x251: [%s:%d] " fmt "\n", __FUNCTION__, \
+ __LINE__ , ## args); \
+ } \
+} while (0)
+# define V4LDBG(level, name, cmd) \
+do { \
+ if (debug >= (level)) \
+ v4l_print_ioctl(name, cmd); \
+} while (0)
+#else
+# define DBG(level, fmt, args...) do {;} while(0)
+# define KDBG(level, fmt, args...) do {;} while(0)
+# define V4LDBG(level, name, cmd) do {;} while(0)
+#endif
+
+#undef PDBG
+#define PDBG(fmt, args...) \
+dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args)
+
+#undef PDBGG
+#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
+
+#endif /* _ET61X251_H_ */
diff --git a/drivers/usb/media/et61x251_core.c b/drivers/usb/media/et61x251_core.c
new file mode 100644
index 0000000..2c0171a
--- /dev/null
+++ b/drivers/usb/media/et61x251_core.c
@@ -0,0 +1,2605 @@
+/***************************************************************************
+ * V4L2 driver for ET61X[12]51 PC Camera Controllers *
+ * *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the Free Software *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
+ ***************************************************************************/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/moduleparam.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/poll.h>
+#include <linux/stat.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/page-flags.h>
+#include <linux/byteorder/generic.h>
+#include <asm/page.h>
+#include <asm/uaccess.h>
+
+#include "et61x251.h"
+
+/*****************************************************************************/
+
+#define ET61X251_MODULE_NAME "V4L2 driver for ET61X[12]51 " \
+ "PC Camera Controllers"
+#define ET61X251_MODULE_AUTHOR "(C) 2006 Luca Risolia"
+#define ET61X251_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
+#define ET61X251_MODULE_LICENSE "GPL"
+#define ET61X251_MODULE_VERSION "1:1.01"
+#define ET61X251_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 1)
+
+/*****************************************************************************/
+
+MODULE_DEVICE_TABLE(usb, et61x251_id_table);
+
+MODULE_AUTHOR(ET61X251_MODULE_AUTHOR " " ET61X251_AUTHOR_EMAIL);
+MODULE_DESCRIPTION(ET61X251_MODULE_NAME);
+MODULE_VERSION(ET61X251_MODULE_VERSION);
+MODULE_LICENSE(ET61X251_MODULE_LICENSE);
+
+static short video_nr[] = {[0 ... ET61X251_MAX_DEVICES-1] = -1};
+module_param_array(video_nr, short, NULL, 0444);
+MODULE_PARM_DESC(video_nr,
+ "\n<-1|n[,...]> Specify V4L2 minor mode number."
+ "\n -1 = use next available (default)"
+ "\n n = use minor number n (integer >= 0)"
+ "\nYou can specify up to "
+ __MODULE_STRING(ET61X251_MAX_DEVICES) " cameras this way."
+ "\nFor example:"
+ "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
+ "\nthe second registered camera and use auto for the first"
+ "\none and for every other camera."
+ "\n");
+
+static short force_munmap[] = {[0 ... ET61X251_MAX_DEVICES-1] =
+ ET61X251_FORCE_MUNMAP};
+module_param_array(force_munmap, bool, NULL, 0444);
+MODULE_PARM_DESC(force_munmap,
+ "\n<0|1[,...]> Force the application to unmap previously"
+ "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
+ "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
+ "\nthis feature. This parameter is specific for each"
+ "\ndetected camera."
+ "\n 0 = do not force memory unmapping"
+ "\n 1 = force memory unmapping (save memory)"
+ "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
+ "\n");
+
+#ifdef ET61X251_DEBUG
+static unsigned short debug = ET61X251_DEBUG_LEVEL;
+module_param(debug, ushort, 0644);
+MODULE_PARM_DESC(debug,
+ "\n<n> Debugging information level, from 0 to 3:"
+ "\n0 = none (use carefully)"
+ "\n1 = critical errors"
+ "\n2 = significant informations"
+ "\n3 = more verbose messages"
+ "\nLevel 3 is useful for testing only, when only "
+ "one device is used."
+ "\nDefault value is "__MODULE_STRING(ET61X251_DEBUG_LEVEL)"."
+ "\n");
+#endif
+
+/*****************************************************************************/
+
+static u32
+et61x251_request_buffers(struct et61x251_device* cam, u32 count,
+ enum et61x251_io_method io)
+{
+ struct v4l2_pix_format* p = &(cam->sensor->pix_format);
+ struct v4l2_rect* r = &(cam->sensor->cropcap.bounds);
+ const size_t imagesize = cam->module_param.force_munmap ||
+ io == IO_READ ?
+ (p->width * p->height * p->priv) / 8 :
+ (r->width * r->height * p->priv) / 8;
+ void* buff = NULL;
+ u32 i;
+
+ if (count > ET61X251_MAX_FRAMES)
+ count = ET61X251_MAX_FRAMES;
+
+ cam->nbuffers = count;
+ while (cam->nbuffers > 0) {
+ if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize))))
+ break;
+ cam->nbuffers--;
+ }
+
+ for (i = 0; i < cam->nbuffers; i++) {
+ cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize);
+ cam->frame[i].buf.index = i;
+ cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize);
+ cam->frame[i].buf.length = imagesize;
+ cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ cam->frame[i].buf.sequence = 0;
+ cam->frame[i].buf.field = V4L2_FIELD_NONE;
+ cam->frame[i].buf.memory = V4L2_MEMORY_MMAP;
+ cam->frame[i].buf.flags = 0;
+ }
+
+ return cam->nbuffers;
+}
+
+
+static void et61x251_release_buffers(struct et61x251_device* cam)
+{
+ if (cam->nbuffers) {
+ vfree(cam->frame[0].bufmem);
+ cam->nbuffers = 0;
+ }
+ cam->frame_current = NULL;
+}
+
+
+static void et61x251_empty_framequeues(struct et61x251_device* cam)
+{
+ u32 i;
+
+ INIT_LIST_HEAD(&cam->inqueue);
+ INIT_LIST_HEAD(&cam->outqueue);
+
+ for (i = 0; i < ET61X251_MAX_FRAMES; i++) {
+ cam->frame[i].state = F_UNUSED;
+ cam->frame[i].buf.bytesused = 0;
+ }
+}
+
+
+static void et61x251_requeue_outqueue(struct et61x251_device* cam)
+{
+ struct et61x251_frame_t *i;
+
+ list_for_each_entry(i, &cam->outqueue, frame) {
+ i->state = F_QUEUED;
+ list_add(&i->frame, &cam->inqueue);
+ }
+
+ INIT_LIST_HEAD(&cam->outqueue);
+}
+
+
+static void et61x251_queue_unusedframes(struct et61x251_device* cam)
+{
+ unsigned long lock_flags;
+ u32 i;
+
+ for (i = 0; i < cam->nbuffers; i++)
+ if (cam->frame[i].state == F_UNUSED) {
+ cam->frame[i].state = F_QUEUED;
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ list_add_tail(&cam->frame[i].frame, &cam->inqueue);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+ }
+}
+
+/*****************************************************************************/
+
+int et61x251_write_reg(struct et61x251_device* cam, u8 value, u16 index)
+{
+ struct usb_device* udev = cam->usbdev;
+ u8* buff = cam->control_buffer;
+ int res;
+
+ *buff = value;
+
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+ 0, index, buff, 1, ET61X251_CTRL_TIMEOUT);
+ if (res < 0) {
+ DBG(3, "Failed to write a register (value 0x%02X, index "
+ "0x%02X, error %d)", value, index, res);
+ return -1;
+ }
+
+ return 0;
+}
+
+
+int et61x251_read_reg(struct et61x251_device* cam, u16 index)
+{
+ struct usb_device* udev = cam->usbdev;
+ u8* buff = cam->control_buffer;
+ int res;
+
+ res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1,
+ 0, index, buff, 1, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ DBG(3, "Failed to read a register (index 0x%02X, error %d)",
+ index, res);
+
+ return (res >= 0) ? (int)(*buff) : -1;
+}
+
+
+static int
+et61x251_i2c_wait(struct et61x251_device* cam, struct et61x251_sensor* sensor)
+{
+ int i, r;
+
+ for (i = 1; i <= 8; i++) {
+ if (sensor->interface == ET61X251_I2C_3WIRES) {
+ r = et61x251_read_reg(cam, 0x8e);
+ if (!(r & 0x02) && (r >= 0))
+ return 0;
+ } else {
+ r = et61x251_read_reg(cam, 0x8b);
+ if (!(r & 0x01) && (r >= 0))
+ return 0;
+ }
+ if (r < 0)
+ return -EIO;
+ udelay(8*8); /* minimum for sensors at 400kHz */
+ }
+
+ return -EBUSY;
+}
+
+
+int
+et61x251_i2c_try_read(struct et61x251_device* cam,
+ struct et61x251_sensor* sensor, u8 address)
+{
+ struct usb_device* udev = cam->usbdev;
+ u8* data = cam->control_buffer;
+ int err = 0, res;
+
+ data[0] = address;
+ data[1] = cam->sensor->i2c_slave_id;
+ data[2] = cam->sensor->rsta | 0x10;
+ data[3] = !(et61x251_read_reg(cam, 0x8b) & 0x02);
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+ 0, 0x88, data, 4, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ err += res;
+
+ err += et61x251_i2c_wait(cam, sensor);
+
+ res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1,
+ 0, 0x80, data, 8, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ err += res;
+
+ if (err)
+ DBG(3, "I2C read failed for %s image sensor", sensor->name);
+
+ PDBGG("I2C read: address 0x%02X, value: 0x%02X", address, data[0]);
+
+ return err ? -1 : (int)data[0];
+}
+
+
+int
+et61x251_i2c_try_write(struct et61x251_device* cam,
+ struct et61x251_sensor* sensor, u8 address, u8 value)
+{
+ struct usb_device* udev = cam->usbdev;
+ u8* data = cam->control_buffer;
+ int err = 0, res;
+
+ data[0] = address;
+ data[1] = cam->sensor->i2c_slave_id;
+ data[2] = cam->sensor->rsta | 0x12;
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+ 0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ err += res;
+
+ data[0] = value;
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+ 0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ err += res;
+
+ err += et61x251_i2c_wait(cam, sensor);
+
+ if (err)
+ DBG(3, "I2C write failed for %s image sensor", sensor->name);
+
+ PDBGG("I2C write: address 0x%02X, value: 0x%02X", address, value);
+
+ return err ? -1 : 0;
+}
+
+
+int
+et61x251_i2c_raw_write(struct et61x251_device* cam, u8 n, u8 data1, u8 data2,
+ u8 data3, u8 data4, u8 data5, u8 data6, u8 data7,
+ u8 data8, u8 address)
+{
+ struct usb_device* udev = cam->usbdev;
+ u8* data = cam->control_buffer;
+ int err = 0, res;
+
+ if (!cam->sensor)
+ return -1;
+
+ data[0] = data2;
+ data[1] = data3;
+ data[2] = data4;
+ data[3] = data5;
+ data[4] = data6;
+ data[5] = data7;
+ data[6] = data8;
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+ 0, 0x81, data, n-1, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ err += res;
+
+ data[0] = address;
+ data[1] = cam->sensor->i2c_slave_id;
+ data[2] = cam->sensor->rsta | 0x02 | (n << 4);
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+ 0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ err += res;
+
+ /* Start writing through the serial interface */
+ data[0] = data1;
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+ 0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ err += res;
+
+ err += et61x251_i2c_wait(cam, cam->sensor);
+
+ if (err)
+ DBG(3, "I2C raw write failed for %s image sensor",
+ cam->sensor->name);
+
+ PDBGG("I2C raw write: %u bytes, address = 0x%02X, data1 = 0x%02X, "
+ "data2 = 0x%02X, data3 = 0x%02X, data4 = 0x%02X, data5 = 0x%02X,"
+ " data6 = 0x%02X, data7 = 0x%02X, data8 = 0x%02X", n, address,
+ data1, data2, data3, data4, data5, data6, data7, data8);
+
+ return err ? -1 : 0;
+
+}
+
+
+int et61x251_i2c_read(struct et61x251_device* cam, u8 address)
+{
+ if (!cam->sensor)
+ return -1;
+
+ return et61x251_i2c_try_read(cam, cam->sensor, address);
+}
+
+
+int et61x251_i2c_write(struct et61x251_device* cam, u8 address, u8 value)
+{
+ if (!cam->sensor)
+ return -1;
+
+ return et61x251_i2c_try_write(cam, cam->sensor, address, value);
+}
+
+/*****************************************************************************/
+
+static void et61x251_urb_complete(struct urb *urb, struct pt_regs* regs)
+{
+ struct et61x251_device* cam = urb->context;
+ struct et61x251_frame_t** f;
+ size_t imagesize;
+ u8 i;
+ int err = 0;
+
+ if (urb->status == -ENOENT)
+ return;
+
+ f = &cam->frame_current;
+
+ if (cam->stream == STREAM_INTERRUPT) {
+ cam->stream = STREAM_OFF;
+ if ((*f))
+ (*f)->state = F_QUEUED;
+ DBG(3, "Stream interrupted");
+ wake_up_interruptible(&cam->wait_stream);
+ }
+
+ if (cam->state & DEV_DISCONNECTED)
+ return;
+
+ if (cam->state & DEV_MISCONFIGURED) {
+ wake_up_interruptible(&cam->wait_frame);
+ return;
+ }
+
+ if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue))
+ goto resubmit_urb;
+
+ if (!(*f))
+ (*f) = list_entry(cam->inqueue.next, struct et61x251_frame_t,
+ frame);
+
+ imagesize = (cam->sensor->pix_format.width *
+ cam->sensor->pix_format.height *
+ cam->sensor->pix_format.priv) / 8;
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ unsigned int len, status;
+ void *pos;
+ u8* b1, * b2, sof;
+ const u8 VOID_BYTES = 6;
+ size_t imglen;
+
+ len = urb->iso_frame_desc[i].actual_length;
+ status = urb->iso_frame_desc[i].status;
+ pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
+
+ if (status) {
+ DBG(3, "Error in isochronous frame");
+ (*f)->state = F_ERROR;
+ continue;
+ }
+
+ b1 = pos++;
+ b2 = pos++;
+ sof = ((*b1 & 0x3f) == 63);
+ imglen = ((*b1 & 0xc0) << 2) | *b2;
+
+ PDBGG("Isochrnous frame: length %u, #%u i, image length %zu",
+ len, i, imglen);
+
+ if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR)
+start_of_frame:
+ if (sof) {
+ (*f)->state = F_GRABBING;
+ (*f)->buf.bytesused = 0;
+ do_gettimeofday(&(*f)->buf.timestamp);
+ pos += 22;
+ DBG(3, "SOF detected: new video frame");
+ }
+
+ if ((*f)->state == F_GRABBING) {
+ if (sof && (*f)->buf.bytesused) {
+ if (cam->sensor->pix_format.pixelformat ==
+ V4L2_PIX_FMT_ET61X251)
+ goto end_of_frame;
+ else {
+ DBG(3, "Not expected SOF detected "
+ "after %lu bytes",
+ (unsigned long)(*f)->buf.bytesused);
+ (*f)->state = F_ERROR;
+ continue;
+ }
+ }
+
+ if ((*f)->buf.bytesused + imglen > imagesize) {
+ DBG(3, "Video frame size exceeded");
+ (*f)->state = F_ERROR;
+ continue;
+ }
+
+ pos += VOID_BYTES;
+
+ memcpy((*f)->bufmem+(*f)->buf.bytesused, pos, imglen);
+ (*f)->buf.bytesused += imglen;
+
+ if ((*f)->buf.bytesused == imagesize) {
+ u32 b;
+end_of_frame:
+ b = (*f)->buf.bytesused;
+ (*f)->state = F_DONE;
+ (*f)->buf.sequence= ++cam->frame_count;
+ spin_lock(&cam->queue_lock);
+ list_move_tail(&(*f)->frame, &cam->outqueue);
+ if (!list_empty(&cam->inqueue))
+ (*f) = list_entry(cam->inqueue.next,
+ struct et61x251_frame_t,
+ frame);
+ else
+ (*f) = NULL;
+ spin_unlock(&cam->queue_lock);
+ DBG(3, "Video frame captured: : %lu bytes",
+ (unsigned long)(b));
+
+ if (!(*f))
+ goto resubmit_urb;
+
+ if (sof &&
+ cam->sensor->pix_format.pixelformat ==
+ V4L2_PIX_FMT_ET61X251)
+ goto start_of_frame;
+ }
+ }
+ }
+
+resubmit_urb:
+ urb->dev = cam->usbdev;
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err < 0 && err != -EPERM) {
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "usb_submit_urb() failed");
+ }
+
+ wake_up_interruptible(&cam->wait_frame);
+}
+
+
+static int et61x251_start_transfer(struct et61x251_device* cam)
+{
+ struct usb_device *udev = cam->usbdev;
+ struct urb* urb;
+ const unsigned int wMaxPacketSize[] = {0, 256, 384, 512, 640, 768, 832,
+ 864, 896, 920, 956, 980, 1000,
+ 1022};
+ const unsigned int psz = wMaxPacketSize[ET61X251_ALTERNATE_SETTING];
+ s8 i, j;
+ int err = 0;
+
+ for (i = 0; i < ET61X251_URBS; i++) {
+ cam->transfer_buffer[i] = kzalloc(ET61X251_ISO_PACKETS * psz,
+ GFP_KERNEL);
+ if (!cam->transfer_buffer[i]) {
+ err = -ENOMEM;
+ DBG(1, "Not enough memory");
+ goto free_buffers;
+ }
+ }
+
+ for (i = 0; i < ET61X251_URBS; i++) {
+ urb = usb_alloc_urb(ET61X251_ISO_PACKETS, GFP_KERNEL);
+ cam->urb[i] = urb;
+ if (!urb) {
+ err = -ENOMEM;
+ DBG(1, "usb_alloc_urb() failed");
+ goto free_urbs;
+ }
+ urb->dev = udev;
+ urb->context = cam;
+ urb->pipe = usb_rcvisocpipe(udev, 1);
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->number_of_packets = ET61X251_ISO_PACKETS;
+ urb->complete = et61x251_urb_complete;
+ urb->transfer_buffer = cam->transfer_buffer[i];
+ urb->transfer_buffer_length = psz * ET61X251_ISO_PACKETS;
+ urb->interval = 1;
+ for (j = 0; j < ET61X251_ISO_PACKETS; j++) {
+ urb->iso_frame_desc[j].offset = psz * j;
+ urb->iso_frame_desc[j].length = psz;
+ }
+ }
+
+ err = et61x251_write_reg(cam, 0x01, 0x03);
+ err = et61x251_write_reg(cam, 0x00, 0x03);
+ err = et61x251_write_reg(cam, 0x08, 0x03);
+ if (err) {
+ err = -EIO;
+ DBG(1, "I/O hardware error");
+ goto free_urbs;
+ }
+
+ err = usb_set_interface(udev, 0, ET61X251_ALTERNATE_SETTING);
+ if (err) {
+ DBG(1, "usb_set_interface() failed");
+ goto free_urbs;
+ }
+
+ cam->frame_current = NULL;
+
+ for (i = 0; i < ET61X251_URBS; i++) {
+ err = usb_submit_urb(cam->urb[i], GFP_KERNEL);
+ if (err) {
+ for (j = i-1; j >= 0; j--)
+ usb_kill_urb(cam->urb[j]);
+ DBG(1, "usb_submit_urb() failed, error %d", err);
+ goto free_urbs;
+ }
+ }
+
+ return 0;
+
+free_urbs:
+ for (i = 0; (i < ET61X251_URBS) && cam->urb[i]; i++)
+ usb_free_urb(cam->urb[i]);
+
+free_buffers:
+ for (i = 0; (i < ET61X251_URBS) && cam->transfer_buffer[i]; i++)
+ kfree(cam->transfer_buffer[i]);
+
+ return err;
+}
+
+
+static int et61x251_stop_transfer(struct et61x251_device* cam)
+{
+ struct usb_device *udev = cam->usbdev;
+ s8 i;
+ int err = 0;
+
+ if (cam->state & DEV_DISCONNECTED)
+ return 0;
+
+ for (i = ET61X251_URBS-1; i >= 0; i--) {
+ usb_kill_urb(cam->urb[i]);
+ usb_free_urb(cam->urb[i]);
+ kfree(cam->transfer_buffer[i]);
+ }
+
+ err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */
+ if (err)
+ DBG(3, "usb_set_interface() failed");
+
+ return err;
+}
+
+
+static int et61x251_stream_interrupt(struct et61x251_device* cam)
+{
+ int err = 0;
+
+ cam->stream = STREAM_INTERRUPT;
+ err = wait_event_timeout(cam->wait_stream,
+ (cam->stream == STREAM_OFF) ||
+ (cam->state & DEV_DISCONNECTED),
+ ET61X251_URB_TIMEOUT);
+ if (cam->state & DEV_DISCONNECTED)
+ return -ENODEV;
+ else if (err) {
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "URB timeout reached. The camera is misconfigured. To "
+ "use it, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return err;
+ }
+
+ return 0;
+}
+
+/*****************************************************************************/
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static u8 et61x251_strtou8(const char* buff, size_t len, ssize_t* count)
+{
+ char str[5];
+ char* endp;
+ unsigned long val;
+
+ if (len < 4) {
+ strncpy(str, buff, len);
+ str[len+1] = '\0';
+ } else {
+ strncpy(str, buff, 4);
+ str[4] = '\0';
+ }
+
+ val = simple_strtoul(str, &endp, 0);
+
+ *count = 0;
+ if (val <= 0xff)
+ *count = (ssize_t)(endp - str);
+ if ((*count) && (len == *count+1) && (buff[*count] == '\n'))
+ *count += 1;
+
+ return (u8)val;
+}
+
+/*
+ NOTE 1: being inside one of the following methods implies that the v4l
+ device exists for sure (see kobjects and reference counters)
+ NOTE 2: buffers are PAGE_SIZE long
+*/
+
+static ssize_t et61x251_show_reg(struct class_device* cd, char* buf)
+{
+ struct et61x251_device* cam;
+ ssize_t count;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ count = sprintf(buf, "%u\n", cam->sysfs.reg);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static ssize_t
+et61x251_store_reg(struct class_device* cd, const char* buf, size_t len)
+{
+ struct et61x251_device* cam;
+ u8 index;
+ ssize_t count;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ index = et61x251_strtou8(buf, len, &count);
+ if (index > 0x8e || !count) {
+ up(&et61x251_sysfs_lock);
+ return -EINVAL;
+ }
+
+ cam->sysfs.reg = index;
+
+ DBG(2, "Moved ET61X[12]51 register index to 0x%02X", cam->sysfs.reg);
+ DBG(3, "Written bytes: %zd", count);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static ssize_t et61x251_show_val(struct class_device* cd, char* buf)
+{
+ struct et61x251_device* cam;
+ ssize_t count;
+ int val;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ if ((val = et61x251_read_reg(cam, cam->sysfs.reg)) < 0) {
+ up(&et61x251_sysfs_lock);
+ return -EIO;
+ }
+
+ count = sprintf(buf, "%d\n", val);
+
+ DBG(3, "Read bytes: %zd", count);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static ssize_t
+et61x251_store_val(struct class_device* cd, const char* buf, size_t len)
+{
+ struct et61x251_device* cam;
+ u8 value;
+ ssize_t count;
+ int err;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ value = et61x251_strtou8(buf, len, &count);
+ if (!count) {
+ up(&et61x251_sysfs_lock);
+ return -EINVAL;
+ }
+
+ err = et61x251_write_reg(cam, value, cam->sysfs.reg);
+ if (err) {
+ up(&et61x251_sysfs_lock);
+ return -EIO;
+ }
+
+ DBG(2, "Written ET61X[12]51 reg. 0x%02X, val. 0x%02X",
+ cam->sysfs.reg, value);
+ DBG(3, "Written bytes: %zd", count);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static ssize_t et61x251_show_i2c_reg(struct class_device* cd, char* buf)
+{
+ struct et61x251_device* cam;
+ ssize_t count;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ count = sprintf(buf, "%u\n", cam->sysfs.i2c_reg);
+
+ DBG(3, "Read bytes: %zd", count);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static ssize_t
+et61x251_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
+{
+ struct et61x251_device* cam;
+ u8 index;
+ ssize_t count;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ index = et61x251_strtou8(buf, len, &count);
+ if (!count) {
+ up(&et61x251_sysfs_lock);
+ return -EINVAL;
+ }
+
+ cam->sysfs.i2c_reg = index;
+
+ DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg);
+ DBG(3, "Written bytes: %zd", count);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static ssize_t et61x251_show_i2c_val(struct class_device* cd, char* buf)
+{
+ struct et61x251_device* cam;
+ ssize_t count;
+ int val;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ if (!(cam->sensor->sysfs_ops & ET61X251_I2C_READ)) {
+ up(&et61x251_sysfs_lock);
+ return -ENOSYS;
+ }
+
+ if ((val = et61x251_i2c_read(cam, cam->sysfs.i2c_reg)) < 0) {
+ up(&et61x251_sysfs_lock);
+ return -EIO;
+ }
+
+ count = sprintf(buf, "%d\n", val);
+
+ DBG(3, "Read bytes: %zd", count);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static ssize_t
+et61x251_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
+{
+ struct et61x251_device* cam;
+ u8 value;
+ ssize_t count;
+ int err;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ if (!(cam->sensor->sysfs_ops & ET61X251_I2C_READ)) {
+ up(&et61x251_sysfs_lock);
+ return -ENOSYS;
+ }
+
+ value = et61x251_strtou8(buf, len, &count);
+ if (!count) {
+ up(&et61x251_sysfs_lock);
+ return -EINVAL;
+ }
+
+ err = et61x251_i2c_write(cam, cam->sysfs.i2c_reg, value);
+ if (err) {
+ up(&et61x251_sysfs_lock);
+ return -EIO;
+ }
+
+ DBG(2, "Written sensor reg. 0x%02X, val. 0x%02X",
+ cam->sysfs.i2c_reg, value);
+ DBG(3, "Written bytes: %zd", count);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static CLASS_DEVICE_ATTR(reg, S_IRUGO | S_IWUSR,
+ et61x251_show_reg, et61x251_store_reg);
+static CLASS_DEVICE_ATTR(val, S_IRUGO | S_IWUSR,
+ et61x251_show_val, et61x251_store_val);
+static CLASS_DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR,
+ et61x251_show_i2c_reg, et61x251_store_i2c_reg);
+static CLASS_DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
+ et61x251_show_i2c_val, et61x251_store_i2c_val);
+
+
+static void et61x251_create_sysfs(struct et61x251_device* cam)
+{
+ struct video_device *v4ldev = cam->v4ldev;
+
+ video_device_create_file(v4ldev, &class_device_attr_reg);
+ video_device_create_file(v4ldev, &class_device_attr_val);
+ if (cam->sensor && cam->sensor->sysfs_ops) {
+ video_device_create_file(v4ldev, &class_device_attr_i2c_reg);
+ video_device_create_file(v4ldev, &class_device_attr_i2c_val);
+ }
+}
+#endif /* CONFIG_VIDEO_ADV_DEBUG */
+
+/*****************************************************************************/
+
+static int
+et61x251_set_pix_format(struct et61x251_device* cam,
+ struct v4l2_pix_format* pix)
+{
+ int r, err = 0;
+
+ if ((r = et61x251_read_reg(cam, 0x12)) < 0)
+ err += r;
+ if (pix->pixelformat == V4L2_PIX_FMT_ET61X251)
+ err += et61x251_write_reg(cam, r & 0xfd, 0x12);
+ else
+ err += et61x251_write_reg(cam, r | 0x02, 0x12);
+
+ return err ? -EIO : 0;
+}
+
+
+static int
+et61x251_set_compression(struct et61x251_device* cam,
+ struct v4l2_jpegcompression* compression)
+{
+ int r, err = 0;
+
+ if ((r = et61x251_read_reg(cam, 0x12)) < 0)
+ err += r;
+ if (compression->quality == 0)
+ err += et61x251_write_reg(cam, r & 0xfb, 0x12);
+ else
+ err += et61x251_write_reg(cam, r | 0x04, 0x12);
+
+ return err ? -EIO : 0;
+}
+
+
+static int et61x251_set_scale(struct et61x251_device* cam, u8 scale)
+{
+ int r = 0, err = 0;
+
+ r = et61x251_read_reg(cam, 0x12);
+ if (r < 0)
+ err += r;
+
+ if (scale == 1)
+ err += et61x251_write_reg(cam, r & ~0x01, 0x12);
+ else if (scale == 2)
+ err += et61x251_write_reg(cam, r | 0x01, 0x12);
+
+ if (err)
+ return -EIO;
+
+ PDBGG("Scaling factor: %u", scale);
+
+ return 0;
+}
+
+
+static int
+et61x251_set_crop(struct et61x251_device* cam, struct v4l2_rect* rect)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ u16 fmw_sx = (u16)(rect->left - s->cropcap.bounds.left +
+ s->active_pixel.left),
+ fmw_sy = (u16)(rect->top - s->cropcap.bounds.top +
+ s->active_pixel.top),
+ fmw_length = (u16)(rect->width),
+ fmw_height = (u16)(rect->height);
+ int err = 0;
+
+ err += et61x251_write_reg(cam, fmw_sx & 0xff, 0x69);
+ err += et61x251_write_reg(cam, fmw_sy & 0xff, 0x6a);
+ err += et61x251_write_reg(cam, fmw_length & 0xff, 0x6b);
+ err += et61x251_write_reg(cam, fmw_height & 0xff, 0x6c);
+ err += et61x251_write_reg(cam, (fmw_sx >> 8) | ((fmw_sy & 0x300) >> 6)
+ | ((fmw_length & 0x300) >> 4)
+ | ((fmw_height & 0x300) >> 2), 0x6d);
+ if (err)
+ return -EIO;
+
+ PDBGG("fmw_sx, fmw_sy, fmw_length, fmw_height: %u %u %u %u",
+ fmw_sx, fmw_sy, fmw_length, fmw_height);
+
+ return 0;
+}
+
+
+static int et61x251_init(struct et61x251_device* cam)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ struct v4l2_control ctrl;
+ struct v4l2_queryctrl *qctrl;
+ struct v4l2_rect* rect;
+ u8 i = 0;
+ int err = 0;
+
+ if (!(cam->state & DEV_INITIALIZED)) {
+ init_waitqueue_head(&cam->open);
+ qctrl = s->qctrl;
+ rect = &(s->cropcap.defrect);
+ cam->compression.quality = ET61X251_COMPRESSION_QUALITY;
+ } else { /* use current values */
+ qctrl = s->_qctrl;
+ rect = &(s->_rect);
+ }
+
+ err += et61x251_set_scale(cam, rect->width / s->pix_format.width);
+ err += et61x251_set_crop(cam, rect);
+ if (err)
+ return err;
+
+ if (s->init) {
+ err = s->init(cam);
+ if (err) {
+ DBG(3, "Sensor initialization failed");
+ return err;
+ }
+ }
+
+ err += et61x251_set_compression(cam, &cam->compression);
+ err += et61x251_set_pix_format(cam, &s->pix_format);
+ if (s->set_pix_format)
+ err += s->set_pix_format(cam, &s->pix_format);
+ if (err)
+ return err;
+
+ if (s->pix_format.pixelformat == V4L2_PIX_FMT_ET61X251)
+ DBG(3, "Compressed video format is active, quality %d",
+ cam->compression.quality);
+ else
+ DBG(3, "Uncompressed video format is active");
+
+ if (s->set_crop)
+ if ((err = s->set_crop(cam, rect))) {
+ DBG(3, "set_crop() failed");
+ return err;
+ }
+
+ if (s->set_ctrl) {
+ for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+ if (s->qctrl[i].id != 0 &&
+ !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) {
+ ctrl.id = s->qctrl[i].id;
+ ctrl.value = qctrl[i].default_value;
+ err = s->set_ctrl(cam, &ctrl);
+ if (err) {
+ DBG(3, "Set %s control failed",
+ s->qctrl[i].name);
+ return err;
+ }
+ DBG(3, "Image sensor supports '%s' control",
+ s->qctrl[i].name);
+ }
+ }
+
+ if (!(cam->state & DEV_INITIALIZED)) {
+ init_MUTEX(&cam->fileop_sem);
+ spin_lock_init(&cam->queue_lock);
+ init_waitqueue_head(&cam->wait_frame);
+ init_waitqueue_head(&cam->wait_stream);
+ cam->nreadbuffers = 2;
+ memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl));
+ memcpy(&(s->_rect), &(s->cropcap.defrect),
+ sizeof(struct v4l2_rect));
+ cam->state |= DEV_INITIALIZED;
+ }
+
+ DBG(2, "Initialization succeeded");
+ return 0;
+}
+
+
+static void et61x251_release_resources(struct et61x251_device* cam)
+{
+ down(&et61x251_sysfs_lock);
+
+ DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+ video_set_drvdata(cam->v4ldev, NULL);
+ video_unregister_device(cam->v4ldev);
+
+ up(&et61x251_sysfs_lock);
+
+ kfree(cam->control_buffer);
+}
+
+/*****************************************************************************/
+
+static int et61x251_open(struct inode* inode, struct file* filp)
+{
+ struct et61x251_device* cam;
+ int err = 0;
+
+ /*
+ This is the only safe way to prevent race conditions with
+ disconnect
+ */
+ if (!down_read_trylock(&et61x251_disconnect))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(video_devdata(filp));
+
+ if (down_interruptible(&cam->dev_sem)) {
+ up_read(&et61x251_disconnect);
+ return -ERESTARTSYS;
+ }
+
+ if (cam->users) {
+ DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor);
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (filp->f_flags & O_NDELAY)) {
+ err = -EWOULDBLOCK;
+ goto out;
+ }
+ up(&cam->dev_sem);
+ err = wait_event_interruptible_exclusive(cam->open,
+ cam->state & DEV_DISCONNECTED
+ || !cam->users);
+ if (err) {
+ up_read(&et61x251_disconnect);
+ return err;
+ }
+ if (cam->state & DEV_DISCONNECTED) {
+ up_read(&et61x251_disconnect);
+ return -ENODEV;
+ }
+ down(&cam->dev_sem);
+ }
+
+
+ if (cam->state & DEV_MISCONFIGURED) {
+ err = et61x251_init(cam);
+ if (err) {
+ DBG(1, "Initialization failed again. "
+ "I will retry on next open().");
+ goto out;
+ }
+ cam->state &= ~DEV_MISCONFIGURED;
+ }
+
+ if ((err = et61x251_start_transfer(cam)))
+ goto out;
+
+ filp->private_data = cam;
+ cam->users++;
+ cam->io = IO_NONE;
+ cam->stream = STREAM_OFF;
+ cam->nbuffers = 0;
+ cam->frame_count = 0;
+ et61x251_empty_framequeues(cam);
+
+ DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+
+out:
+ up(&cam->dev_sem);
+ up_read(&et61x251_disconnect);
+ return err;
+}
+
+
+static int et61x251_release(struct inode* inode, struct file* filp)
+{
+ struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+
+ down(&cam->dev_sem); /* prevent disconnect() to be called */
+
+ et61x251_stop_transfer(cam);
+
+ et61x251_release_buffers(cam);
+
+ if (cam->state & DEV_DISCONNECTED) {
+ et61x251_release_resources(cam);
+ up(&cam->dev_sem);
+ kfree(cam);
+ return 0;
+ }
+
+ cam->users--;
+ wake_up_interruptible_nr(&cam->open, 1);
+
+ DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+
+ up(&cam->dev_sem);
+
+ return 0;
+}
+
+
+static ssize_t
+et61x251_read(struct file* filp, char __user * buf,
+ size_t count, loff_t* f_pos)
+{
+ struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+ struct et61x251_frame_t* f, * i;
+ unsigned long lock_flags;
+ int err = 0;
+
+ if (down_interruptible(&cam->fileop_sem))
+ return -ERESTARTSYS;
+
+ if (cam->state & DEV_DISCONNECTED) {
+ DBG(1, "Device not present");
+ up(&cam->fileop_sem);
+ return -ENODEV;
+ }
+
+ if (cam->state & DEV_MISCONFIGURED) {
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
+ up(&cam->fileop_sem);
+ return -EIO;
+ }
+
+ if (cam->io == IO_MMAP) {
+ DBG(3, "Close and open the device again to choose the read "
+ "method");
+ up(&cam->fileop_sem);
+ return -EINVAL;
+ }
+
+ if (cam->io == IO_NONE) {
+ if (!et61x251_request_buffers(cam, cam->nreadbuffers,
+ IO_READ)) {
+ DBG(1, "read() failed, not enough memory");
+ up(&cam->fileop_sem);
+ return -ENOMEM;
+ }
+ cam->io = IO_READ;
+ cam->stream = STREAM_ON;
+ }
+
+ if (list_empty(&cam->inqueue)) {
+ if (!list_empty(&cam->outqueue))
+ et61x251_empty_framequeues(cam);
+ et61x251_queue_unusedframes(cam);
+ }
+
+ if (!count) {
+ up(&cam->fileop_sem);
+ return 0;
+ }
+
+ if (list_empty(&cam->outqueue)) {
+ if (filp->f_flags & O_NONBLOCK) {
+ up(&cam->fileop_sem);
+ return -EAGAIN;
+ }
+ err = wait_event_interruptible
+ ( cam->wait_frame,
+ (!list_empty(&cam->outqueue)) ||
+ (cam->state & DEV_DISCONNECTED) ||
+ (cam->state & DEV_MISCONFIGURED) );
+ if (err) {
+ up(&cam->fileop_sem);
+ return err;
+ }
+ if (cam->state & DEV_DISCONNECTED) {
+ up(&cam->fileop_sem);
+ return -ENODEV;
+ }
+ if (cam->state & DEV_MISCONFIGURED) {
+ up(&cam->fileop_sem);
+ return -EIO;
+ }
+ }
+
+ f = list_entry(cam->outqueue.prev, struct et61x251_frame_t, frame);
+
+ if (count > f->buf.bytesused)
+ count = f->buf.bytesused;
+
+ if (copy_to_user(buf, f->bufmem, count)) {
+ err = -EFAULT;
+ goto exit;
+ }
+ *f_pos += count;
+
+exit:
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ list_for_each_entry(i, &cam->outqueue, frame)
+ i->state = F_UNUSED;
+ INIT_LIST_HEAD(&cam->outqueue);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+ et61x251_queue_unusedframes(cam);
+
+ PDBGG("Frame #%lu, bytes read: %zu",
+ (unsigned long)f->buf.index, count);
+
+ up(&cam->fileop_sem);
+
+ return err ? err : count;
+}
+
+
+static unsigned int et61x251_poll(struct file *filp, poll_table *wait)
+{
+ struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+ struct et61x251_frame_t* f;
+ unsigned long lock_flags;
+ unsigned int mask = 0;
+
+ if (down_interruptible(&cam->fileop_sem))
+ return POLLERR;
+
+ if (cam->state & DEV_DISCONNECTED) {
+ DBG(1, "Device not present");
+ goto error;
+ }
+
+ if (cam->state & DEV_MISCONFIGURED) {
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
+ goto error;
+ }
+
+ if (cam->io == IO_NONE) {
+ if (!et61x251_request_buffers(cam, cam->nreadbuffers,
+ IO_READ)) {
+ DBG(1, "poll() failed, not enough memory");
+ goto error;
+ }
+ cam->io = IO_READ;
+ cam->stream = STREAM_ON;
+ }
+
+ if (cam->io == IO_READ) {
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ list_for_each_entry(f, &cam->outqueue, frame)
+ f->state = F_UNUSED;
+ INIT_LIST_HEAD(&cam->outqueue);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+ et61x251_queue_unusedframes(cam);
+ }
+
+ poll_wait(filp, &cam->wait_frame, wait);
+
+ if (!list_empty(&cam->outqueue))
+ mask |= POLLIN | POLLRDNORM;
+
+ up(&cam->fileop_sem);
+
+ return mask;
+
+error:
+ up(&cam->fileop_sem);
+ return POLLERR;
+}
+
+
+static void et61x251_vm_open(struct vm_area_struct* vma)
+{
+ struct et61x251_frame_t* f = vma->vm_private_data;
+ f->vma_use_count++;
+}
+
+
+static void et61x251_vm_close(struct vm_area_struct* vma)
+{
+ /* NOTE: buffers are not freed here */
+ struct et61x251_frame_t* f = vma->vm_private_data;
+ f->vma_use_count--;
+}
+
+
+static struct vm_operations_struct et61x251_vm_ops = {
+ .open = et61x251_vm_open,
+ .close = et61x251_vm_close,
+};
+
+
+static int et61x251_mmap(struct file* filp, struct vm_area_struct *vma)
+{
+ struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+ unsigned long size = vma->vm_end - vma->vm_start,
+ start = vma->vm_start;
+ void *pos;
+ u32 i;
+
+ if (down_interruptible(&cam->fileop_sem))
+ return -ERESTARTSYS;
+
+ if (cam->state & DEV_DISCONNECTED) {
+ DBG(1, "Device not present");
+ up(&cam->fileop_sem);
+ return -ENODEV;
+ }
+
+ if (cam->state & DEV_MISCONFIGURED) {
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
+ up(&cam->fileop_sem);
+ return -EIO;
+ }
+
+ if (cam->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) ||
+ size != PAGE_ALIGN(cam->frame[0].buf.length)) {
+ up(&cam->fileop_sem);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < cam->nbuffers; i++) {
+ if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff)
+ break;
+ }
+ if (i == cam->nbuffers) {
+ up(&cam->fileop_sem);
+ return -EINVAL;
+ }
+
+ vma->vm_flags |= VM_IO;
+ vma->vm_flags |= VM_RESERVED;
+
+ pos = cam->frame[i].bufmem;
+ while (size > 0) { /* size is page-aligned */
+ if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
+ up(&cam->fileop_sem);
+ return -EAGAIN;
+ }
+ start += PAGE_SIZE;
+ pos += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+
+ vma->vm_ops = &et61x251_vm_ops;
+ vma->vm_private_data = &cam->frame[i];
+
+ et61x251_vm_open(vma);
+
+ up(&cam->fileop_sem);
+
+ return 0;
+}
+
+/*****************************************************************************/
+
+static int
+et61x251_vidioc_querycap(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_capability cap = {
+ .driver = "et61x251",
+ .version = ET61X251_MODULE_VERSION_CODE,
+ .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+ V4L2_CAP_STREAMING,
+ };
+
+ strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
+ if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
+ strlcpy(cap.bus_info, cam->usbdev->dev.bus_id,
+ sizeof(cap.bus_info));
+
+ if (copy_to_user(arg, &cap, sizeof(cap)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_enuminput(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_input i;
+
+ if (copy_from_user(&i, arg, sizeof(i)))
+ return -EFAULT;
+
+ if (i.index)
+ return -EINVAL;
+
+ memset(&i, 0, sizeof(i));
+ strcpy(i.name, "Camera");
+
+ if (copy_to_user(arg, &i, sizeof(i)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_gs_input(struct et61x251_device* cam, void __user * arg)
+{
+ int index;
+
+ if (copy_from_user(&index, arg, sizeof(index)))
+ return -EFAULT;
+
+ if (index != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_query_ctrl(struct et61x251_device* cam, void __user * arg)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ struct v4l2_queryctrl qc;
+ u8 i;
+
+ if (copy_from_user(&qc, arg, sizeof(qc)))
+ return -EFAULT;
+
+ for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+ if (qc.id && qc.id == s->qctrl[i].id) {
+ memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
+ if (copy_to_user(arg, &qc, sizeof(qc)))
+ return -EFAULT;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+
+static int
+et61x251_vidioc_g_ctrl(struct et61x251_device* cam, void __user * arg)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ struct v4l2_control ctrl;
+ int err = 0;
+ u8 i;
+
+ if (!s->get_ctrl && !s->set_ctrl)
+ return -EINVAL;
+
+ if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+ return -EFAULT;
+
+ if (!s->get_ctrl) {
+ for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+ if (ctrl.id == s->qctrl[i].id) {
+ ctrl.value = s->_qctrl[i].default_value;
+ goto exit;
+ }
+ return -EINVAL;
+ } else
+ err = s->get_ctrl(cam, &ctrl);
+
+exit:
+ if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
+ return -EFAULT;
+
+ return err;
+}
+
+
+static int
+et61x251_vidioc_s_ctrl(struct et61x251_device* cam, void __user * arg)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ struct v4l2_control ctrl;
+ u8 i;
+ int err = 0;
+
+ if (!s->set_ctrl)
+ return -EINVAL;
+
+ if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+ return -EFAULT;
+
+ for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+ if (ctrl.id == s->qctrl[i].id) {
+ if (ctrl.value < s->qctrl[i].minimum ||
+ ctrl.value > s->qctrl[i].maximum)
+ return -ERANGE;
+ ctrl.value -= ctrl.value % s->qctrl[i].step;
+ break;
+ }
+
+ if ((err = s->set_ctrl(cam, &ctrl)))
+ return err;
+
+ s->_qctrl[i].default_value = ctrl.value;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_cropcap(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_cropcap* cc = &(cam->sensor->cropcap);
+
+ cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ cc->pixelaspect.numerator = 1;
+ cc->pixelaspect.denominator = 1;
+
+ if (copy_to_user(arg, cc, sizeof(*cc)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_g_crop(struct et61x251_device* cam, void __user * arg)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ struct v4l2_crop crop = {
+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ };
+
+ memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
+
+ if (copy_to_user(arg, &crop, sizeof(crop)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ struct v4l2_crop crop;
+ struct v4l2_rect* rect;
+ struct v4l2_rect* bounds = &(s->cropcap.bounds);
+ struct v4l2_pix_format* pix_format = &(s->pix_format);
+ u8 scale;
+ const enum et61x251_stream_state stream = cam->stream;
+ const u32 nbuffers = cam->nbuffers;
+ u32 i;
+ int err = 0;
+
+ if (copy_from_user(&crop, arg, sizeof(crop)))
+ return -EFAULT;
+
+ rect = &(crop.c);
+
+ if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (cam->module_param.force_munmap)
+ for (i = 0; i < cam->nbuffers; i++)
+ if (cam->frame[i].vma_use_count) {
+ DBG(3, "VIDIOC_S_CROP failed. "
+ "Unmap the buffers first.");
+ return -EINVAL;
+ }
+
+ /* Preserve R,G or B origin */
+ rect->left = (s->_rect.left & 1L) ? rect->left | 1L : rect->left & ~1L;
+ rect->top = (s->_rect.top & 1L) ? rect->top | 1L : rect->top & ~1L;
+
+ if (rect->width < 4)
+ rect->width = 4;
+ if (rect->height < 4)
+ rect->height = 4;
+ if (rect->width > bounds->width)
+ rect->width = bounds->width;
+ if (rect->height > bounds->height)
+ rect->height = bounds->height;
+ if (rect->left < bounds->left)
+ rect->left = bounds->left;
+ if (rect->top < bounds->top)
+ rect->top = bounds->top;
+ if (rect->left + rect->width > bounds->left + bounds->width)
+ rect->left = bounds->left+bounds->width - rect->width;
+ if (rect->top + rect->height > bounds->top + bounds->height)
+ rect->top = bounds->top+bounds->height - rect->height;
+
+ rect->width &= ~3L;
+ rect->height &= ~3L;
+
+ if (ET61X251_PRESERVE_IMGSCALE) {
+ /* Calculate the actual scaling factor */
+ u32 a, b;
+ a = rect->width * rect->height;
+ b = pix_format->width * pix_format->height;
+ scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1;
+ } else
+ scale = 1;
+
+ if (cam->stream == STREAM_ON)
+ if ((err = et61x251_stream_interrupt(cam)))
+ return err;
+
+ if (copy_to_user(arg, &crop, sizeof(crop))) {
+ cam->stream = stream;
+ return -EFAULT;
+ }
+
+ if (cam->module_param.force_munmap || cam->io == IO_READ)
+ et61x251_release_buffers(cam);
+
+ err = et61x251_set_crop(cam, rect);
+ if (s->set_crop)
+ err += s->set_crop(cam, rect);
+ err += et61x251_set_scale(cam, scale);
+
+ if (err) { /* atomic, no rollback in ioctl() */
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -EIO;
+ }
+
+ s->pix_format.width = rect->width/scale;
+ s->pix_format.height = rect->height/scale;
+ memcpy(&(s->_rect), rect, sizeof(*rect));
+
+ if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
+ nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) {
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -ENOMEM;
+ }
+
+ if (cam->io == IO_READ)
+ et61x251_empty_framequeues(cam);
+ else if (cam->module_param.force_munmap)
+ et61x251_requeue_outqueue(cam);
+
+ cam->stream = stream;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_enum_fmt(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_fmtdesc fmtd;
+
+ if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
+ return -EFAULT;
+
+ if (fmtd.index == 0) {
+ strcpy(fmtd.description, "bayer rgb");
+ fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8;
+ } else if (fmtd.index == 1) {
+ strcpy(fmtd.description, "compressed");
+ fmtd.pixelformat = V4L2_PIX_FMT_ET61X251;
+ fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
+ } else
+ return -EINVAL;
+
+ fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
+
+ if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_g_fmt(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_format format;
+ struct v4l2_pix_format* pfmt = &(cam->sensor->pix_format);
+
+ if (copy_from_user(&format, arg, sizeof(format)))
+ return -EFAULT;
+
+ if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_ET61X251)
+ ? 0 : (pfmt->width * pfmt->priv) / 8;
+ pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
+ pfmt->field = V4L2_FIELD_NONE;
+ memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
+
+ if (copy_to_user(arg, &format, sizeof(format)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd,
+ void __user * arg)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ struct v4l2_format format;
+ struct v4l2_pix_format* pix;
+ struct v4l2_pix_format* pfmt = &(s->pix_format);
+ struct v4l2_rect* bounds = &(s->cropcap.bounds);
+ struct v4l2_rect rect;
+ u8 scale;
+ const enum et61x251_stream_state stream = cam->stream;
+ const u32 nbuffers = cam->nbuffers;
+ u32 i;
+ int err = 0;
+
+ if (copy_from_user(&format, arg, sizeof(format)))
+ return -EFAULT;
+
+ pix = &(format.fmt.pix);
+
+ if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ memcpy(&rect, &(s->_rect), sizeof(rect));
+
+ { /* calculate the actual scaling factor */
+ u32 a, b;
+ a = rect.width * rect.height;
+ b = pix->width * pix->height;
+ scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1;
+ }
+
+ rect.width = scale * pix->width;
+ rect.height = scale * pix->height;
+
+ if (rect.width < 4)
+ rect.width = 4;
+ if (rect.height < 4)
+ rect.height = 4;
+ if (rect.width > bounds->left + bounds->width - rect.left)
+ rect.width = bounds->left + bounds->width - rect.left;
+ if (rect.height > bounds->top + bounds->height - rect.top)
+ rect.height = bounds->top + bounds->height - rect.top;
+
+ rect.width &= ~3L;
+ rect.height &= ~3L;
+
+ { /* adjust the scaling factor */
+ u32 a, b;
+ a = rect.width * rect.height;
+ b = pix->width * pix->height;
+ scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1;
+ }
+
+ pix->width = rect.width / scale;
+ pix->height = rect.height / scale;
+
+ if (pix->pixelformat != V4L2_PIX_FMT_ET61X251 &&
+ pix->pixelformat != V4L2_PIX_FMT_SBGGR8)
+ pix->pixelformat = pfmt->pixelformat;
+ pix->priv = pfmt->priv; /* bpp */
+ pix->colorspace = pfmt->colorspace;
+ pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_ET61X251)
+ ? 0 : (pix->width * pix->priv) / 8;
+ pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
+ pix->field = V4L2_FIELD_NONE;
+
+ if (cmd == VIDIOC_TRY_FMT) {
+ if (copy_to_user(arg, &format, sizeof(format)))
+ return -EFAULT;
+ return 0;
+ }
+
+ if (cam->module_param.force_munmap)
+ for (i = 0; i < cam->nbuffers; i++)
+ if (cam->frame[i].vma_use_count) {
+ DBG(3, "VIDIOC_S_FMT failed. "
+ "Unmap the buffers first.");
+ return -EINVAL;
+ }
+
+ if (cam->stream == STREAM_ON)
+ if ((err = et61x251_stream_interrupt(cam)))
+ return err;
+
+ if (copy_to_user(arg, &format, sizeof(format))) {
+ cam->stream = stream;
+ return -EFAULT;
+ }
+
+ if (cam->module_param.force_munmap || cam->io == IO_READ)
+ et61x251_release_buffers(cam);
+
+ err += et61x251_set_pix_format(cam, pix);
+ err += et61x251_set_crop(cam, &rect);
+ if (s->set_pix_format)
+ err += s->set_pix_format(cam, pix);
+ if (s->set_crop)
+ err += s->set_crop(cam, &rect);
+ err += et61x251_set_scale(cam, scale);
+
+ if (err) { /* atomic, no rollback in ioctl() */
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -EIO;
+ }
+
+ memcpy(pfmt, pix, sizeof(*pix));
+ memcpy(&(s->_rect), &rect, sizeof(rect));
+
+ if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
+ nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) {
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -ENOMEM;
+ }
+
+ if (cam->io == IO_READ)
+ et61x251_empty_framequeues(cam);
+ else if (cam->module_param.force_munmap)
+ et61x251_requeue_outqueue(cam);
+
+ cam->stream = stream;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_g_jpegcomp(struct et61x251_device* cam, void __user * arg)
+{
+ if (copy_to_user(arg, &cam->compression,
+ sizeof(cam->compression)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_s_jpegcomp(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_jpegcompression jc;
+ const enum et61x251_stream_state stream = cam->stream;
+ int err = 0;
+
+ if (copy_from_user(&jc, arg, sizeof(jc)))
+ return -EFAULT;
+
+ if (jc.quality != 0 && jc.quality != 1)
+ return -EINVAL;
+
+ if (cam->stream == STREAM_ON)
+ if ((err = et61x251_stream_interrupt(cam)))
+ return err;
+
+ err += et61x251_set_compression(cam, &jc);
+ if (err) { /* atomic, no rollback in ioctl() */
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
+ "problems. To use the camera, close and open "
+ "/dev/video%d again.", cam->v4ldev->minor);
+ return -EIO;
+ }
+
+ cam->compression.quality = jc.quality;
+
+ cam->stream = stream;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_reqbufs(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_requestbuffers rb;
+ u32 i;
+ int err;
+
+ if (copy_from_user(&rb, arg, sizeof(rb)))
+ return -EFAULT;
+
+ if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ rb.memory != V4L2_MEMORY_MMAP)
+ return -EINVAL;
+
+ if (cam->io == IO_READ) {
+ DBG(3, "Close and open the device again to choose the mmap "
+ "I/O method");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < cam->nbuffers; i++)
+ if (cam->frame[i].vma_use_count) {
+ DBG(3, "VIDIOC_REQBUFS failed. "
+ "Previous buffers are still mapped.");
+ return -EINVAL;
+ }
+
+ if (cam->stream == STREAM_ON)
+ if ((err = et61x251_stream_interrupt(cam)))
+ return err;
+
+ et61x251_empty_framequeues(cam);
+
+ et61x251_release_buffers(cam);
+ if (rb.count)
+ rb.count = et61x251_request_buffers(cam, rb.count, IO_MMAP);
+
+ if (copy_to_user(arg, &rb, sizeof(rb))) {
+ et61x251_release_buffers(cam);
+ cam->io = IO_NONE;
+ return -EFAULT;
+ }
+
+ cam->io = rb.count ? IO_MMAP : IO_NONE;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_querybuf(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_buffer b;
+
+ if (copy_from_user(&b, arg, sizeof(b)))
+ return -EFAULT;
+
+ if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ b.index >= cam->nbuffers || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
+
+ if (cam->frame[b.index].vma_use_count)
+ b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+ if (cam->frame[b.index].state == F_DONE)
+ b.flags |= V4L2_BUF_FLAG_DONE;
+ else if (cam->frame[b.index].state != F_UNUSED)
+ b.flags |= V4L2_BUF_FLAG_QUEUED;
+
+ if (copy_to_user(arg, &b, sizeof(b)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_qbuf(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_buffer b;
+ unsigned long lock_flags;
+
+ if (copy_from_user(&b, arg, sizeof(b)))
+ return -EFAULT;
+
+ if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ b.index >= cam->nbuffers || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ if (cam->frame[b.index].state != F_UNUSED)
+ return -EINVAL;
+
+ cam->frame[b.index].state = F_QUEUED;
+
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+ PDBGG("Frame #%lu queued", (unsigned long)b.index);
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_dqbuf(struct et61x251_device* cam, struct file* filp,
+ void __user * arg)
+{
+ struct v4l2_buffer b;
+ struct et61x251_frame_t *f;
+ unsigned long lock_flags;
+ int err = 0;
+
+ if (copy_from_user(&b, arg, sizeof(b)))
+ return -EFAULT;
+
+ if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP)
+ return -EINVAL;
+
+ if (list_empty(&cam->outqueue)) {
+ if (cam->stream == STREAM_OFF)
+ return -EINVAL;
+ if (filp->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+ err = wait_event_interruptible
+ ( cam->wait_frame,
+ (!list_empty(&cam->outqueue)) ||
+ (cam->state & DEV_DISCONNECTED) ||
+ (cam->state & DEV_MISCONFIGURED) );
+ if (err)
+ return err;
+ if (cam->state & DEV_DISCONNECTED)
+ return -ENODEV;
+ if (cam->state & DEV_MISCONFIGURED)
+ return -EIO;
+ }
+
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ f = list_entry(cam->outqueue.next, struct et61x251_frame_t, frame);
+ list_del(cam->outqueue.next);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+ f->state = F_UNUSED;
+
+ memcpy(&b, &f->buf, sizeof(b));
+ if (f->vma_use_count)
+ b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+ if (copy_to_user(arg, &b, sizeof(b)))
+ return -EFAULT;
+
+ PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index);
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_streamon(struct et61x251_device* cam, void __user * arg)
+{
+ int type;
+
+ if (copy_from_user(&type, arg, sizeof(type)))
+ return -EFAULT;
+
+ if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ if (list_empty(&cam->inqueue))
+ return -EINVAL;
+
+ cam->stream = STREAM_ON;
+
+ DBG(3, "Stream on");
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_streamoff(struct et61x251_device* cam, void __user * arg)
+{
+ int type, err;
+
+ if (copy_from_user(&type, arg, sizeof(type)))
+ return -EFAULT;
+
+ if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ if (cam->stream == STREAM_ON)
+ if ((err = et61x251_stream_interrupt(cam)))
+ return err;
+
+ et61x251_empty_framequeues(cam);
+
+ DBG(3, "Stream off");
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_g_parm(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_streamparm sp;
+
+ if (copy_from_user(&sp, arg, sizeof(sp)))
+ return -EFAULT;
+
+ if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ sp.parm.capture.extendedmode = 0;
+ sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+ if (copy_to_user(arg, &sp, sizeof(sp)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_s_parm(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_streamparm sp;
+
+ if (copy_from_user(&sp, arg, sizeof(sp)))
+ return -EFAULT;
+
+ if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ sp.parm.capture.extendedmode = 0;
+
+ if (sp.parm.capture.readbuffers == 0)
+ sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+ if (sp.parm.capture.readbuffers > ET61X251_MAX_FRAMES)
+ sp.parm.capture.readbuffers = ET61X251_MAX_FRAMES;
+
+ if (copy_to_user(arg, &sp, sizeof(sp)))
+ return -EFAULT;
+
+ cam->nreadbuffers = sp.parm.capture.readbuffers;
+
+ return 0;
+}
+
+
+static int et61x251_ioctl_v4l2(struct inode* inode, struct file* filp,
+ unsigned int cmd, void __user * arg)
+{
+ struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+
+ switch (cmd) {
+
+ case VIDIOC_QUERYCAP:
+ return et61x251_vidioc_querycap(cam, arg);
+
+ case VIDIOC_ENUMINPUT:
+ return et61x251_vidioc_enuminput(cam, arg);
+
+ case VIDIOC_G_INPUT:
+ case VIDIOC_S_INPUT:
+ return et61x251_vidioc_gs_input(cam, arg);
+
+ case VIDIOC_QUERYCTRL:
+ return et61x251_vidioc_query_ctrl(cam, arg);
+
+ case VIDIOC_G_CTRL:
+ return et61x251_vidioc_g_ctrl(cam, arg);
+
+ case VIDIOC_S_CTRL_OLD:
+ case VIDIOC_S_CTRL:
+ return et61x251_vidioc_s_ctrl(cam, arg);
+
+ case VIDIOC_CROPCAP_OLD:
+ case VIDIOC_CROPCAP:
+ return et61x251_vidioc_cropcap(cam, arg);
+
+ case VIDIOC_G_CROP:
+ return et61x251_vidioc_g_crop(cam, arg);
+
+ case VIDIOC_S_CROP:
+ return et61x251_vidioc_s_crop(cam, arg);
+
+ case VIDIOC_ENUM_FMT:
+ return et61x251_vidioc_enum_fmt(cam, arg);
+
+ case VIDIOC_G_FMT:
+ return et61x251_vidioc_g_fmt(cam, arg);
+
+ case VIDIOC_TRY_FMT:
+ case VIDIOC_S_FMT:
+ return et61x251_vidioc_try_s_fmt(cam, cmd, arg);
+
+ case VIDIOC_G_JPEGCOMP:
+ return et61x251_vidioc_g_jpegcomp(cam, arg);
+
+ case VIDIOC_S_JPEGCOMP:
+ return et61x251_vidioc_s_jpegcomp(cam, arg);
+
+ case VIDIOC_REQBUFS:
+ return et61x251_vidioc_reqbufs(cam, arg);
+
+ case VIDIOC_QUERYBUF:
+ return et61x251_vidioc_querybuf(cam, arg);
+
+ case VIDIOC_QBUF:
+ return et61x251_vidioc_qbuf(cam, arg);
+
+ case VIDIOC_DQBUF:
+ return et61x251_vidioc_dqbuf(cam, filp, arg);
+
+ case VIDIOC_STREAMON:
+ return et61x251_vidioc_streamon(cam, arg);
+
+ case VIDIOC_STREAMOFF:
+ return et61x251_vidioc_streamoff(cam, arg);
+
+ case VIDIOC_G_PARM:
+ return et61x251_vidioc_g_parm(cam, arg);
+
+ case VIDIOC_S_PARM_OLD:
+ case VIDIOC_S_PARM:
+ return et61x251_vidioc_s_parm(cam, arg);
+
+ case VIDIOC_G_STD:
+ case VIDIOC_S_STD:
+ case VIDIOC_QUERYSTD:
+ case VIDIOC_ENUMSTD:
+ case VIDIOC_QUERYMENU:
+ return -EINVAL;
+
+ default:
+ return -EINVAL;
+
+ }
+}
+
+
+static int et61x251_ioctl(struct inode* inode, struct file* filp,
+ unsigned int cmd, unsigned long arg)
+{
+ struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+ int err = 0;
+
+ if (down_interruptible(&cam->fileop_sem))
+ return -ERESTARTSYS;
+
+ if (cam->state & DEV_DISCONNECTED) {
+ DBG(1, "Device not present");
+ up(&cam->fileop_sem);
+ return -ENODEV;
+ }
+
+ if (cam->state & DEV_MISCONFIGURED) {
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
+ up(&cam->fileop_sem);
+ return -EIO;
+ }
+
+ V4LDBG(3, "et61x251", cmd);
+
+ err = et61x251_ioctl_v4l2(inode, filp, cmd, (void __user *)arg);
+
+ up(&cam->fileop_sem);
+
+ return err;
+}
+
+
+static struct file_operations et61x251_fops = {
+ .owner = THIS_MODULE,
+ .open = et61x251_open,
+ .release = et61x251_release,
+ .ioctl = et61x251_ioctl,
+ .read = et61x251_read,
+ .poll = et61x251_poll,
+ .mmap = et61x251_mmap,
+ .llseek = no_llseek,
+};
+
+/*****************************************************************************/
+
+/* It exists a single interface only. We do not need to validate anything. */
+static int
+et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct et61x251_device* cam;
+ static unsigned int dev_nr = 0;
+ unsigned int i;
+ int err = 0;
+
+ if (!(cam = kzalloc(sizeof(struct et61x251_device), GFP_KERNEL)))
+ return -ENOMEM;
+
+ cam->usbdev = udev;
+
+ if (!(cam->control_buffer = kzalloc(8, GFP_KERNEL))) {
+ DBG(1, "kmalloc() failed");
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ if (!(cam->v4ldev = video_device_alloc())) {
+ DBG(1, "video_device_alloc() failed");
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ init_MUTEX(&cam->dev_sem);
+
+ DBG(2, "ET61X[12]51 PC Camera Controller detected "
+ "(vid/pid 0x%04X/0x%04X)",id->idVendor, id->idProduct);
+
+ for (i = 0; et61x251_sensor_table[i]; i++) {
+ err = et61x251_sensor_table[i](cam);
+ if (!err)
+ break;
+ }
+
+ if (!err && cam->sensor)
+ DBG(2, "%s image sensor detected", cam->sensor->name);
+ else {
+ DBG(1, "No supported image sensor detected");
+ err = -ENODEV;
+ goto fail;
+ }
+
+ if (et61x251_init(cam)) {
+ DBG(1, "Initialization failed. I will retry on open().");
+ cam->state |= DEV_MISCONFIGURED;
+ }
+
+ strcpy(cam->v4ldev->name, "ET61X[12]51 PC Camera");
+ cam->v4ldev->owner = THIS_MODULE;
+ cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
+ cam->v4ldev->hardware = 0;
+ cam->v4ldev->fops = &et61x251_fops;
+ cam->v4ldev->minor = video_nr[dev_nr];
+ cam->v4ldev->release = video_device_release;
+ video_set_drvdata(cam->v4ldev, cam);
+
+ down(&cam->dev_sem);
+
+ err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
+ video_nr[dev_nr]);
+ if (err) {
+ DBG(1, "V4L2 device registration failed");
+ if (err == -ENFILE && video_nr[dev_nr] == -1)
+ DBG(1, "Free /dev/videoX node not found");
+ video_nr[dev_nr] = -1;
+ dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0;
+ up(&cam->dev_sem);
+ goto fail;
+ }
+
+ DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+
+ cam->module_param.force_munmap = force_munmap[dev_nr];
+
+ dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0;
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ et61x251_create_sysfs(cam);
+ DBG(2, "Optional device control through 'sysfs' interface ready");
+#endif
+
+ usb_set_intfdata(intf, cam);
+
+ up(&cam->dev_sem);
+
+ return 0;
+
+fail:
+ if (cam) {
+ kfree(cam->control_buffer);
+ if (cam->v4ldev)
+ video_device_release(cam->v4ldev);
+ kfree(cam);
+ }
+ return err;
+}
+
+
+static void et61x251_usb_disconnect(struct usb_interface* intf)
+{
+ struct et61x251_device* cam = usb_get_intfdata(intf);
+
+ if (!cam)
+ return;
+
+ down_write(&et61x251_disconnect);
+
+ down(&cam->dev_sem);
+
+ DBG(2, "Disconnecting %s...", cam->v4ldev->name);
+
+ wake_up_interruptible_all(&cam->open);
+
+ if (cam->users) {
+ DBG(2, "Device /dev/video%d is open! Deregistration and "
+ "memory deallocation are deferred on close.",
+ cam->v4ldev->minor);
+ cam->state |= DEV_MISCONFIGURED;
+ et61x251_stop_transfer(cam);
+ cam->state |= DEV_DISCONNECTED;
+ wake_up_interruptible(&cam->wait_frame);
+ wake_up_interruptible(&cam->wait_stream);
+ } else {
+ cam->state |= DEV_DISCONNECTED;
+ et61x251_release_resources(cam);
+ }
+
+ up(&cam->dev_sem);
+
+ if (!cam->users)
+ kfree(cam);
+
+ up_write(&et61x251_disconnect);
+}
+
+
+static struct usb_driver et61x251_usb_driver = {
+ .name = "et61x251",
+ .id_table = et61x251_id_table,
+ .probe = et61x251_usb_probe,
+ .disconnect = et61x251_usb_disconnect,
+};
+
+/*****************************************************************************/
+
+static int __init et61x251_module_init(void)
+{
+ int err = 0;
+
+ KDBG(2, ET61X251_MODULE_NAME " v" ET61X251_MODULE_VERSION);
+ KDBG(3, ET61X251_MODULE_AUTHOR);
+
+ if ((err = usb_register(&et61x251_usb_driver)))
+ KDBG(1, "usb_register() failed");
+
+ return err;
+}
+
+
+static void __exit et61x251_module_exit(void)
+{
+ usb_deregister(&et61x251_usb_driver);
+}
+
+
+module_init(et61x251_module_init);
+module_exit(et61x251_module_exit);
diff --git a/drivers/usb/media/et61x251_sensor.h b/drivers/usb/media/et61x251_sensor.h
new file mode 100644
index 0000000..b9df910
--- /dev/null
+++ b/drivers/usb/media/et61x251_sensor.h
@@ -0,0 +1,115 @@
+/***************************************************************************
+ * API for image sensors connected to ET61X[12]51 PC Camera Controllers *
+ * *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the Free Software *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
+ ***************************************************************************/
+
+#ifndef _ET61X251_SENSOR_H_
+#define _ET61X251_SENSOR_H_
+
+#include <linux/usb.h>
+#include <linux/videodev.h>
+#include <linux/device.h>
+#include <linux/stddef.h>
+#include <linux/errno.h>
+#include <asm/types.h>
+
+struct et61x251_device;
+struct et61x251_sensor;
+
+/*****************************************************************************/
+
+extern int et61x251_probe_tas5130d1b(struct et61x251_device* cam);
+
+#define ET61X251_SENSOR_TABLE \
+/* Weak detections must go at the end of the list */ \
+static int (*et61x251_sensor_table[])(struct et61x251_device*) = { \
+ &et61x251_probe_tas5130d1b, \
+ NULL, \
+};
+
+extern void
+et61x251_attach_sensor(struct et61x251_device* cam,
+ struct et61x251_sensor* sensor);
+
+/*****************************************************************************/
+
+extern int et61x251_write_reg(struct et61x251_device*, u8 value, u16 index);
+extern int et61x251_read_reg(struct et61x251_device*, u16 index);
+extern int et61x251_i2c_write(struct et61x251_device*, u8 address, u8 value);
+extern int et61x251_i2c_read(struct et61x251_device*, u8 address);
+extern int et61x251_i2c_try_write(struct et61x251_device*,
+ struct et61x251_sensor*, u8 address,
+ u8 value);
+extern int et61x251_i2c_try_read(struct et61x251_device*,
+ struct et61x251_sensor*, u8 address);
+extern int et61x251_i2c_raw_write(struct et61x251_device*, u8 n, u8 data1,
+ u8 data2, u8 data3, u8 data4, u8 data5,
+ u8 data6, u8 data7, u8 data8, u8 address);
+
+/*****************************************************************************/
+
+enum et61x251_i2c_sysfs_ops {
+ ET61X251_I2C_READ = 0x01,
+ ET61X251_I2C_WRITE = 0x02,
+};
+
+enum et61x251_i2c_interface {
+ ET61X251_I2C_2WIRES,
+ ET61X251_I2C_3WIRES,
+};
+
+/* Repeat start condition when RSTA is high */
+enum et61x251_i2c_rsta {
+ ET61X251_I2C_RSTA_STOP = 0x00, /* stop then start */
+ ET61X251_I2C_RSTA_REPEAT = 0x01, /* repeat start */
+};
+
+#define ET61X251_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10
+
+struct et61x251_sensor {
+ char name[32];
+
+ enum et61x251_i2c_sysfs_ops sysfs_ops;
+
+ enum et61x251_i2c_interface interface;
+ u8 i2c_slave_id;
+ enum et61x251_i2c_rsta rsta;
+ struct v4l2_rect active_pixel; /* left and top define FVSX and FVSY */
+
+ struct v4l2_queryctrl qctrl[ET61X251_MAX_CTRLS];
+ struct v4l2_cropcap cropcap;
+ struct v4l2_pix_format pix_format;
+
+ int (*init)(struct et61x251_device* cam);
+ int (*get_ctrl)(struct et61x251_device* cam,
+ struct v4l2_control* ctrl);
+ int (*set_ctrl)(struct et61x251_device* cam,
+ const struct v4l2_control* ctrl);
+ int (*set_crop)(struct et61x251_device* cam,
+ const struct v4l2_rect* rect);
+ int (*set_pix_format)(struct et61x251_device* cam,
+ const struct v4l2_pix_format* pix);
+
+ const struct usb_device* usbdev;
+
+ /* Private */
+ struct v4l2_queryctrl _qctrl[ET61X251_MAX_CTRLS];
+ struct v4l2_rect _rect;
+};
+
+#endif /* _ET61X251_SENSOR_H_ */
diff --git a/drivers/usb/media/et61x251_tas5130d1b.c b/drivers/usb/media/et61x251_tas5130d1b.c
new file mode 100644
index 0000000..65f1ae9
--- /dev/null
+++ b/drivers/usb/media/et61x251_tas5130d1b.c
@@ -0,0 +1,137 @@
+/***************************************************************************
+ * Plug-in for TAS5130D1B image sensor connected to the ET61X[12]51 *
+ * PC Camera Controllers *
+ * *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the Free Software *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
+ ***************************************************************************/
+
+#include "et61x251_sensor.h"
+
+
+static int tas5130d1b_init(struct et61x251_device* cam)
+{
+ int err = 0;
+
+ err += et61x251_write_reg(cam, 0x14, 0x01);
+ err += et61x251_write_reg(cam, 0x1b, 0x02);
+ err += et61x251_write_reg(cam, 0x02, 0x12);
+ err += et61x251_write_reg(cam, 0x0e, 0x60);
+ err += et61x251_write_reg(cam, 0x80, 0x61);
+ err += et61x251_write_reg(cam, 0xf0, 0x62);
+ err += et61x251_write_reg(cam, 0x03, 0x63);
+ err += et61x251_write_reg(cam, 0x14, 0x64);
+ err += et61x251_write_reg(cam, 0xf4, 0x65);
+ err += et61x251_write_reg(cam, 0x01, 0x66);
+ err += et61x251_write_reg(cam, 0x05, 0x67);
+ err += et61x251_write_reg(cam, 0x8f, 0x68);
+ err += et61x251_write_reg(cam, 0x0f, 0x8d);
+ err += et61x251_write_reg(cam, 0x08, 0x8e);
+
+ return err;
+}
+
+
+static int tas5130d1b_set_ctrl(struct et61x251_device* cam,
+ const struct v4l2_control* ctrl)
+{
+ int err = 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_GAIN:
+ err += et61x251_i2c_raw_write(cam, 2, 0x20,
+ 0xf6-ctrl->value, 0, 0, 0,
+ 0, 0, 0, 0);
+ break;
+ case V4L2_CID_EXPOSURE:
+ err += et61x251_i2c_raw_write(cam, 2, 0x40,
+ 0x47-ctrl->value, 0, 0, 0,
+ 0, 0, 0, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return err ? -EIO : 0;
+}
+
+
+static struct et61x251_sensor tas5130d1b = {
+ .name = "TAS5130D1B",
+ .interface = ET61X251_I2C_3WIRES,
+ .rsta = ET61X251_I2C_RSTA_STOP,
+ .active_pixel = {
+ .left = 106,
+ .top = 13,
+ },
+ .init = &tas5130d1b_init,
+ .qctrl = {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "global gain",
+ .minimum = 0x00,
+ .maximum = 0xf6,
+ .step = 0x02,
+ .default_value = 0x0d,
+ .flags = 0,
+ },
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "exposure",
+ .minimum = 0x00,
+ .maximum = 0x47,
+ .step = 0x01,
+ .default_value = 0x23,
+ .flags = 0,
+ },
+ },
+ .set_ctrl = &tas5130d1b_set_ctrl,
+ .cropcap = {
+ .bounds = {
+ .left = 0,
+ .top = 0,
+ .width = 640,
+ .height = 480,
+ },
+ .defrect = {
+ .left = 0,
+ .top = 0,
+ .width = 640,
+ .height = 480,
+ },
+ },
+ .pix_format = {
+ .width = 640,
+ .height = 480,
+ .pixelformat = V4L2_PIX_FMT_SBGGR8,
+ .priv = 8,
+ },
+};
+
+
+int et61x251_probe_tas5130d1b(struct et61x251_device* cam)
+{
+ /* This sensor has no identifiers, so let's attach it anyway */
+ et61x251_attach_sensor(cam, &tas5130d1b);
+
+ /* Sensor detection is based on USB pid/vid */
+ if (le16_to_cpu(tas5130d1b.usbdev->descriptor.idProduct) != 0x6251)
+ return -ENODEV;
+
+ return 0;
+}
diff --git a/drivers/usb/media/ov511.c b/drivers/usb/media/ov511.c
index 8af665b..51e9cc0 100644
--- a/drivers/usb/media/ov511.c
+++ b/drivers/usb/media/ov511.c
@@ -204,22 +204,10 @@
static struct usb_driver ov511_driver;
-static struct ov51x_decomp_ops *ov511_decomp_ops;
-static struct ov51x_decomp_ops *ov511_mmx_decomp_ops;
-static struct ov51x_decomp_ops *ov518_decomp_ops;
-static struct ov51x_decomp_ops *ov518_mmx_decomp_ops;
-
/* Number of times to retry a failed I2C transaction. Increase this if you
* are getting "Failed to read sensor ID..." */
static const int i2c_detect_tries = 5;
-/* MMX support is present in kernel and CPU. Checked upon decomp module load. */
-#if defined(__i386__) || defined(__x86_64__)
-#define ov51x_mmx_available (cpu_has_mmx)
-#else
-#define ov51x_mmx_available (0)
-#endif
-
static struct usb_device_id device_table [] = {
{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511) },
{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) },
@@ -3012,93 +3000,18 @@
*
**********************************************************************/
-/* Chooses a decompression module, locks it, and sets ov->decomp_ops
- * accordingly. Returns -ENXIO if decompressor is not available, otherwise
- * returns 0 if no other error.
- */
static int
request_decompressor(struct usb_ov511 *ov)
{
- if (!ov)
- return -ENODEV;
-
- if (ov->decomp_ops) {
- err("ERROR: Decompressor already requested!");
- return -EINVAL;
- }
-
- lock_kernel();
-
- /* Try to get MMX, and fall back on no-MMX if necessary */
- if (ov->bclass == BCL_OV511) {
- if (ov511_mmx_decomp_ops) {
- PDEBUG(3, "Using OV511 MMX decompressor");
- ov->decomp_ops = ov511_mmx_decomp_ops;
- } else if (ov511_decomp_ops) {
- PDEBUG(3, "Using OV511 decompressor");
- ov->decomp_ops = ov511_decomp_ops;
- } else {
- err("No decompressor available");
- }
- } else if (ov->bclass == BCL_OV518) {
- if (ov518_mmx_decomp_ops) {
- PDEBUG(3, "Using OV518 MMX decompressor");
- ov->decomp_ops = ov518_mmx_decomp_ops;
- } else if (ov518_decomp_ops) {
- PDEBUG(3, "Using OV518 decompressor");
- ov->decomp_ops = ov518_decomp_ops;
- } else {
- err("No decompressor available");
- }
+ if (ov->bclass == BCL_OV511 || ov->bclass == BCL_OV518) {
+ err("No decompressor available");
} else {
err("Unknown bridge");
}
- if (!ov->decomp_ops)
- goto nosys;
-
- if (!ov->decomp_ops->owner) {
- ov->decomp_ops = NULL;
- goto nosys;
- }
-
- if (!try_module_get(ov->decomp_ops->owner))
- goto nosys;
-
- unlock_kernel();
- return 0;
-
- nosys:
- unlock_kernel();
return -ENOSYS;
}
-/* Unlocks decompression module and nulls ov->decomp_ops. Safe to call even
- * if ov->decomp_ops is NULL.
- */
-static void
-release_decompressor(struct usb_ov511 *ov)
-{
- int released = 0; /* Did we actually do anything? */
-
- if (!ov)
- return;
-
- lock_kernel();
-
- if (ov->decomp_ops) {
- module_put(ov->decomp_ops->owner);
- released = 1;
- }
-
- ov->decomp_ops = NULL;
-
- unlock_kernel();
-
- if (released)
- PDEBUG(3, "Decompressor released");
-}
-
static void
decompress(struct usb_ov511 *ov, struct ov511_frame *frame,
unsigned char *pIn0, unsigned char *pOut0)
@@ -3107,31 +3020,6 @@
if (request_decompressor(ov))
return;
- PDEBUG(4, "Decompressing %d bytes", frame->bytes_recvd);
-
- if (frame->format == VIDEO_PALETTE_GREY
- && ov->decomp_ops->decomp_400) {
- int ret = ov->decomp_ops->decomp_400(
- pIn0,
- pOut0,
- frame->compbuf,
- frame->rawwidth,
- frame->rawheight,
- frame->bytes_recvd);
- PDEBUG(4, "DEBUG: decomp_400 returned %d", ret);
- } else if (frame->format != VIDEO_PALETTE_GREY
- && ov->decomp_ops->decomp_420) {
- int ret = ov->decomp_ops->decomp_420(
- pIn0,
- pOut0,
- frame->compbuf,
- frame->rawwidth,
- frame->rawheight,
- frame->bytes_recvd);
- PDEBUG(4, "DEBUG: decomp_420 returned %d", ret);
- } else {
- err("Decompressor does not support this format");
- }
}
/**********************************************************************
@@ -4087,8 +3975,6 @@
ov->user--;
ov51x_stop_isoc(ov);
- release_decompressor(ov);
-
if (ov->led_policy == LED_AUTO)
ov51x_led_control(ov, 0);
@@ -6021,82 +5907,6 @@
*
***************************************************************************/
-/* Returns 0 for success */
-int
-ov511_register_decomp_module(int ver, struct ov51x_decomp_ops *ops, int ov518,
- int mmx)
-{
- if (ver != DECOMP_INTERFACE_VER) {
- err("Decompression module has incompatible");
- err("interface version %d", ver);
- err("Interface version %d is required", DECOMP_INTERFACE_VER);
- return -EINVAL;
- }
-
- if (!ops)
- return -EFAULT;
-
- if (mmx && !ov51x_mmx_available) {
- err("MMX not available on this system or kernel");
- return -EINVAL;
- }
-
- lock_kernel();
-
- if (ov518) {
- if (mmx) {
- if (ov518_mmx_decomp_ops)
- goto err_in_use;
- else
- ov518_mmx_decomp_ops = ops;
- } else {
- if (ov518_decomp_ops)
- goto err_in_use;
- else
- ov518_decomp_ops = ops;
- }
- } else {
- if (mmx) {
- if (ov511_mmx_decomp_ops)
- goto err_in_use;
- else
- ov511_mmx_decomp_ops = ops;
- } else {
- if (ov511_decomp_ops)
- goto err_in_use;
- else
- ov511_decomp_ops = ops;
- }
- }
-
- unlock_kernel();
- return 0;
-
-err_in_use:
- unlock_kernel();
- return -EBUSY;
-}
-
-void
-ov511_deregister_decomp_module(int ov518, int mmx)
-{
- lock_kernel();
-
- if (ov518) {
- if (mmx)
- ov518_mmx_decomp_ops = NULL;
- else
- ov518_decomp_ops = NULL;
- } else {
- if (mmx)
- ov511_mmx_decomp_ops = NULL;
- else
- ov511_decomp_ops = NULL;
- }
-
- unlock_kernel();
-}
-
static int __init
usb_ov511_init(void)
{
@@ -6123,5 +5933,3 @@
module_init(usb_ov511_init);
module_exit(usb_ov511_exit);
-EXPORT_SYMBOL(ov511_register_decomp_module);
-EXPORT_SYMBOL(ov511_deregister_decomp_module);
diff --git a/drivers/usb/media/pwc/pwc-ctrl.c b/drivers/usb/media/pwc/pwc-ctrl.c
index 359c4b2..3ebb6e9 100644
--- a/drivers/usb/media/pwc/pwc-ctrl.c
+++ b/drivers/usb/media/pwc/pwc-ctrl.c
@@ -1152,45 +1152,6 @@
/* End of Add-Ons */
/* ************************************************* */
-/* Linux 2.5.something and 2.6 pass direct pointers to arguments of
- ioctl() calls. With 2.4, you have to do tedious copy_from_user()
- and copy_to_user() calls. With these macros we circumvent this,
- and let me maintain only one source file. The functionality is
- exactly the same otherwise.
- */
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
-
-/* define local variable for arg */
-#define ARG_DEF(ARG_type, ARG_name)\
- ARG_type *ARG_name = arg;
-/* copy arg to local variable */
-#define ARG_IN(ARG_name) /* nothing */
-/* argument itself (referenced) */
-#define ARGR(ARG_name) (*ARG_name)
-/* argument address */
-#define ARGA(ARG_name) ARG_name
-/* copy local variable to arg */
-#define ARG_OUT(ARG_name) /* nothing */
-
-#else
-
-#define ARG_DEF(ARG_type, ARG_name)\
- ARG_type ARG_name;
-#define ARG_IN(ARG_name)\
- if (copy_from_user(&ARG_name, arg, sizeof(ARG_name))) {\
- ret = -EFAULT;\
- break;\
- }
-#define ARGR(ARG_name) ARG_name
-#define ARGA(ARG_name) &ARG_name
-#define ARG_OUT(ARG_name)\
- if (copy_to_user(arg, &ARG_name, sizeof(ARG_name))) {\
- ret = -EFAULT;\
- break;\
- }
-
-#endif
int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
{
@@ -1220,243 +1181,206 @@
case VIDIOCPWCSCQUAL:
{
- ARG_DEF(int, qual)
+ int *qual = arg;
- ARG_IN(qual)
- if (ARGR(qual) < 0 || ARGR(qual) > 3)
+ if (*qual < 0 || *qual > 3)
ret = -EINVAL;
else
- ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, ARGR(qual), pdev->vsnapshot);
+ ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, *qual, pdev->vsnapshot);
if (ret >= 0)
- pdev->vcompression = ARGR(qual);
+ pdev->vcompression = *qual;
break;
}
case VIDIOCPWCGCQUAL:
{
- ARG_DEF(int, qual)
-
- ARGR(qual) = pdev->vcompression;
- ARG_OUT(qual)
+ int *qual = arg;
+ *qual = pdev->vcompression;
break;
}
case VIDIOCPWCPROBE:
{
- ARG_DEF(struct pwc_probe, probe)
-
- strcpy(ARGR(probe).name, pdev->vdev->name);
- ARGR(probe).type = pdev->type;
- ARG_OUT(probe)
+ struct pwc_probe *probe = arg;
+ strcpy(probe->name, pdev->vdev->name);
+ probe->type = pdev->type;
break;
}
case VIDIOCPWCGSERIAL:
{
- ARG_DEF(struct pwc_serial, serial)
-
- strcpy(ARGR(serial).serial, pdev->serial);
- ARG_OUT(serial)
+ struct pwc_serial *serial = arg;
+ strcpy(serial->serial, pdev->serial);
break;
}
case VIDIOCPWCSAGC:
{
- ARG_DEF(int, agc)
-
- ARG_IN(agc)
- if (pwc_set_agc(pdev, ARGR(agc) < 0 ? 1 : 0, ARGR(agc)))
+ int *agc = arg;
+ if (pwc_set_agc(pdev, *agc < 0 ? 1 : 0, *agc))
ret = -EINVAL;
break;
}
case VIDIOCPWCGAGC:
{
- ARG_DEF(int, agc)
+ int *agc = arg;
- if (pwc_get_agc(pdev, ARGA(agc)))
+ if (pwc_get_agc(pdev, agc))
ret = -EINVAL;
- ARG_OUT(agc)
break;
}
case VIDIOCPWCSSHUTTER:
{
- ARG_DEF(int, shutter_speed)
-
- ARG_IN(shutter_speed)
- ret = pwc_set_shutter_speed(pdev, ARGR(shutter_speed) < 0 ? 1 : 0, ARGR(shutter_speed));
+ int *shutter_speed = arg;
+ ret = pwc_set_shutter_speed(pdev, *shutter_speed < 0 ? 1 : 0, *shutter_speed);
break;
}
case VIDIOCPWCSAWB:
{
- ARG_DEF(struct pwc_whitebalance, wb)
+ struct pwc_whitebalance *wb = arg;
- ARG_IN(wb)
- ret = pwc_set_awb(pdev, ARGR(wb).mode);
- if (ret >= 0 && ARGR(wb).mode == PWC_WB_MANUAL) {
- pwc_set_red_gain(pdev, ARGR(wb).manual_red);
- pwc_set_blue_gain(pdev, ARGR(wb).manual_blue);
+ ret = pwc_set_awb(pdev, wb->mode);
+ if (ret >= 0 && wb->mode == PWC_WB_MANUAL) {
+ pwc_set_red_gain(pdev, wb->manual_red);
+ pwc_set_blue_gain(pdev, wb->manual_blue);
}
break;
}
case VIDIOCPWCGAWB:
{
- ARG_DEF(struct pwc_whitebalance, wb)
+ struct pwc_whitebalance *wb = arg;
- memset(ARGA(wb), 0, sizeof(struct pwc_whitebalance));
- ARGR(wb).mode = pwc_get_awb(pdev);
- if (ARGR(wb).mode < 0)
+ memset(wb, 0, sizeof(struct pwc_whitebalance));
+ wb->mode = pwc_get_awb(pdev);
+ if (wb->mode < 0)
ret = -EINVAL;
else {
- if (ARGR(wb).mode == PWC_WB_MANUAL) {
- ret = pwc_get_red_gain(pdev, &ARGR(wb).manual_red);
+ if (wb->mode == PWC_WB_MANUAL) {
+ ret = pwc_get_red_gain(pdev, &wb->manual_red);
if (ret < 0)
break;
- ret = pwc_get_blue_gain(pdev, &ARGR(wb).manual_blue);
+ ret = pwc_get_blue_gain(pdev, &wb->manual_blue);
if (ret < 0)
break;
}
- if (ARGR(wb).mode == PWC_WB_AUTO) {
- ret = pwc_read_red_gain(pdev, &ARGR(wb).read_red);
+ if (wb->mode == PWC_WB_AUTO) {
+ ret = pwc_read_red_gain(pdev, &wb->read_red);
if (ret < 0)
break;
- ret =pwc_read_blue_gain(pdev, &ARGR(wb).read_blue);
+ ret = pwc_read_blue_gain(pdev, &wb->read_blue);
if (ret < 0)
break;
}
}
- ARG_OUT(wb)
break;
}
case VIDIOCPWCSAWBSPEED:
{
- ARG_DEF(struct pwc_wb_speed, wbs)
+ struct pwc_wb_speed *wbs = arg;
- if (ARGR(wbs).control_speed > 0) {
- ret = pwc_set_wb_speed(pdev, ARGR(wbs).control_speed);
+ if (wbs->control_speed > 0) {
+ ret = pwc_set_wb_speed(pdev, wbs->control_speed);
}
- if (ARGR(wbs).control_delay > 0) {
- ret = pwc_set_wb_delay(pdev, ARGR(wbs).control_delay);
+ if (wbs->control_delay > 0) {
+ ret = pwc_set_wb_delay(pdev, wbs->control_delay);
}
break;
}
case VIDIOCPWCGAWBSPEED:
{
- ARG_DEF(struct pwc_wb_speed, wbs)
+ struct pwc_wb_speed *wbs = arg;
- ret = pwc_get_wb_speed(pdev, &ARGR(wbs).control_speed);
+ ret = pwc_get_wb_speed(pdev, &wbs->control_speed);
if (ret < 0)
break;
- ret = pwc_get_wb_delay(pdev, &ARGR(wbs).control_delay);
+ ret = pwc_get_wb_delay(pdev, &wbs->control_delay);
if (ret < 0)
break;
- ARG_OUT(wbs)
break;
}
case VIDIOCPWCSLED:
{
- ARG_DEF(struct pwc_leds, leds)
-
- ARG_IN(leds)
- ret = pwc_set_leds(pdev, ARGR(leds).led_on, ARGR(leds).led_off);
+ struct pwc_leds *leds = arg;
+ ret = pwc_set_leds(pdev, leds->led_on, leds->led_off);
break;
}
case VIDIOCPWCGLED:
{
- ARG_DEF(struct pwc_leds, leds)
-
- ret = pwc_get_leds(pdev, &ARGR(leds).led_on, &ARGR(leds).led_off);
- ARG_OUT(leds)
+ struct pwc_leds *leds = arg;
+ ret = pwc_get_leds(pdev, &leds->led_on, &leds->led_off);
break;
}
case VIDIOCPWCSCONTOUR:
{
- ARG_DEF(int, contour)
-
- ARG_IN(contour)
- ret = pwc_set_contour(pdev, ARGR(contour));
+ int *contour = arg;
+ ret = pwc_set_contour(pdev, *contour);
break;
}
case VIDIOCPWCGCONTOUR:
{
- ARG_DEF(int, contour)
-
- ret = pwc_get_contour(pdev, ARGA(contour));
- ARG_OUT(contour)
+ int *contour = arg;
+ ret = pwc_get_contour(pdev, contour);
break;
}
case VIDIOCPWCSBACKLIGHT:
{
- ARG_DEF(int, backlight)
-
- ARG_IN(backlight)
- ret = pwc_set_backlight(pdev, ARGR(backlight));
+ int *backlight = arg;
+ ret = pwc_set_backlight(pdev, *backlight);
break;
}
case VIDIOCPWCGBACKLIGHT:
{
- ARG_DEF(int, backlight)
-
- ret = pwc_get_backlight(pdev, ARGA(backlight));
- ARG_OUT(backlight)
+ int *backlight = arg;
+ ret = pwc_get_backlight(pdev, backlight);
break;
}
case VIDIOCPWCSFLICKER:
{
- ARG_DEF(int, flicker)
-
- ARG_IN(flicker)
- ret = pwc_set_flicker(pdev, ARGR(flicker));
+ int *flicker = arg;
+ ret = pwc_set_flicker(pdev, *flicker);
break;
}
case VIDIOCPWCGFLICKER:
{
- ARG_DEF(int, flicker)
-
- ret = pwc_get_flicker(pdev, ARGA(flicker));
- ARG_OUT(flicker)
+ int *flicker = arg;
+ ret = pwc_get_flicker(pdev, flicker);
break;
}
case VIDIOCPWCSDYNNOISE:
{
- ARG_DEF(int, dynnoise)
-
- ARG_IN(dynnoise)
- ret = pwc_set_dynamic_noise(pdev, ARGR(dynnoise));
+ int *dynnoise = arg;
+ ret = pwc_set_dynamic_noise(pdev, *dynnoise);
break;
}
case VIDIOCPWCGDYNNOISE:
{
- ARG_DEF(int, dynnoise)
-
- ret = pwc_get_dynamic_noise(pdev, ARGA(dynnoise));
- ARG_OUT(dynnoise);
+ int *dynnoise = arg;
+ ret = pwc_get_dynamic_noise(pdev, dynnoise);
break;
}
case VIDIOCPWCGREALSIZE:
{
- ARG_DEF(struct pwc_imagesize, size)
-
- ARGR(size).width = pdev->image.x;
- ARGR(size).height = pdev->image.y;
- ARG_OUT(size)
+ struct pwc_imagesize *size = arg;
+ size->width = pdev->image.x;
+ size->height = pdev->image.y;
break;
}
@@ -1464,10 +1388,9 @@
{
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
- ARG_DEF(int, flags)
+ int *flags = arg;
- ARG_IN(flags)
- ret = pwc_mpt_reset(pdev, ARGR(flags));
+ ret = pwc_mpt_reset(pdev, *flags);
if (ret >= 0)
{
pdev->pan_angle = 0;
@@ -1485,10 +1408,8 @@
{
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
- ARG_DEF(struct pwc_mpt_range, range)
-
- ARGR(range) = pdev->angle_range;
- ARG_OUT(range)
+ struct pwc_mpt_range *range = arg;
+ *range = pdev->angle_range;
}
else
{
@@ -1503,21 +1424,19 @@
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
- ARG_DEF(struct pwc_mpt_angles, angles)
-
- ARG_IN(angles)
+ struct pwc_mpt_angles *angles = arg;
/* The camera can only set relative angles, so
do some calculations when getting an absolute angle .
*/
- if (ARGR(angles).absolute)
+ if (angles->absolute)
{
- new_pan = ARGR(angles).pan;
- new_tilt = ARGR(angles).tilt;
+ new_pan = angles->pan;
+ new_tilt = angles->tilt;
}
else
{
- new_pan = pdev->pan_angle + ARGR(angles).pan;
- new_tilt = pdev->tilt_angle + ARGR(angles).tilt;
+ new_pan = pdev->pan_angle + angles->pan;
+ new_tilt = pdev->tilt_angle + angles->tilt;
}
/* check absolute ranges */
if (new_pan < pdev->angle_range.pan_min ||
@@ -1560,12 +1479,11 @@
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
- ARG_DEF(struct pwc_mpt_angles, angles)
+ struct pwc_mpt_angles *angles = arg;
- ARGR(angles).absolute = 1;
- ARGR(angles).pan = pdev->pan_angle;
- ARGR(angles).tilt = pdev->tilt_angle;
- ARG_OUT(angles)
+ angles->absolute = 1;
+ angles->pan = pdev->pan_angle;
+ angles->tilt = pdev->tilt_angle;
}
else
{
@@ -1578,10 +1496,8 @@
{
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
- ARG_DEF(struct pwc_mpt_status, status)
-
- ret = pwc_mpt_get_status(pdev, ARGA(status));
- ARG_OUT(status)
+ struct pwc_mpt_status *status = arg;
+ ret = pwc_mpt_get_status(pdev, status);
}
else
{
@@ -1592,24 +1508,22 @@
case VIDIOCPWCGVIDCMD:
{
- ARG_DEF(struct pwc_video_command, cmd);
+ struct pwc_video_command *cmd = arg;
- ARGR(cmd).type = pdev->type;
- ARGR(cmd).release = pdev->release;
- ARGR(cmd).command_len = pdev->cmd_len;
- memcpy(&ARGR(cmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
- ARGR(cmd).bandlength = pdev->vbandlength;
- ARGR(cmd).frame_size = pdev->frame_size;
- ARG_OUT(cmd)
+ cmd->type = pdev->type;
+ cmd->release = pdev->release;
+ cmd->command_len = pdev->cmd_len;
+ memcpy(&cmd->command_buf, pdev->cmd_buf, pdev->cmd_len);
+ cmd->bandlength = pdev->vbandlength;
+ cmd->frame_size = pdev->frame_size;
break;
}
/*
case VIDIOCPWCGVIDTABLE:
{
- ARG_DEF(struct pwc_table_init_buffer, table);
- ARGR(table).len = pdev->cmd_len;
- memcpy(&ARGR(table).buffer, pdev->decompress_data, pdev->decompressor->table_size);
- ARG_OUT(table)
+ struct pwc_table_init_buffer *table = arg;
+ table->len = pdev->cmd_len;
+ memcpy(&table->buffer, pdev->decompress_data, pdev->decompressor->table_size);
break;
}
*/
diff --git a/drivers/usb/media/sn9c102.h b/drivers/usb/media/sn9c102.h
index e5cea0e..17d60c1 100644
--- a/drivers/usb/media/sn9c102.h
+++ b/drivers/usb/media/sn9c102.h
@@ -1,7 +1,7 @@
/***************************************************************************
* V4L2 driver for SN9C10x PC Camera Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
@@ -23,7 +23,8 @@
#include <linux/version.h>
#include <linux/usb.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/spinlock.h>
@@ -52,13 +53,6 @@
/*****************************************************************************/
-#define SN9C102_MODULE_NAME "V4L2 driver for SN9C10x PC Camera Controllers"
-#define SN9C102_MODULE_AUTHOR "(C) 2004-2005 Luca Risolia"
-#define SN9C102_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
-#define SN9C102_MODULE_LICENSE "GPL"
-#define SN9C102_MODULE_VERSION "1:1.24a"
-#define SN9C102_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 24)
-
enum sn9c102_bridge {
BRIDGE_SN9C101 = 0x01,
BRIDGE_SN9C102 = 0x02,
@@ -102,12 +96,13 @@
STREAM_ON,
};
+typedef char sn9c103_sof_header_t[18];
typedef char sn9c102_sof_header_t[12];
typedef char sn9c102_eof_header_t[4];
struct sn9c102_sysfs_attr {
u8 reg, i2c_reg;
- sn9c102_sof_header_t frame_header;
+ sn9c103_sof_header_t frame_header;
};
struct sn9c102_module_param {
@@ -118,8 +113,6 @@
static DECLARE_RWSEM(sn9c102_disconnect);
struct sn9c102_device {
- struct device dev;
-
struct video_device* v4ldev;
enum sn9c102_bridge bridge;
@@ -140,8 +133,8 @@
struct v4l2_jpegcompression compression;
struct sn9c102_sysfs_attr sysfs;
- sn9c102_sof_header_t sof_header;
- u16 reg[32];
+ sn9c103_sof_header_t sof_header;
+ u16 reg[63];
struct sn9c102_module_param module_param;
@@ -160,7 +153,6 @@
struct sn9c102_sensor* sensor)
{
cam->sensor = sensor;
- cam->sensor->dev = &cam->dev;
cam->sensor->usbdev = cam->usbdev;
}
@@ -170,19 +162,24 @@
#undef KDBG
#ifdef SN9C102_DEBUG
# define DBG(level, fmt, args...) \
-{ \
+do { \
if (debug >= (level)) { \
if ((level) == 1) \
- dev_err(&cam->dev, fmt "\n", ## args); \
+ dev_err(&cam->usbdev->dev, fmt "\n", ## args); \
else if ((level) == 2) \
- dev_info(&cam->dev, fmt "\n", ## args); \
+ dev_info(&cam->usbdev->dev, fmt "\n", ## args); \
else if ((level) >= 3) \
- dev_info(&cam->dev, "[%s:%d] " fmt "\n", \
+ dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \
__FUNCTION__, __LINE__ , ## args); \
} \
-}
+} while (0)
+# define V4LDBG(level, name, cmd) \
+do { \
+ if (debug >= (level)) \
+ v4l_print_ioctl(name, cmd); \
+} while (0)
# define KDBG(level, fmt, args...) \
-{ \
+do { \
if (debug >= (level)) { \
if ((level) == 1 || (level) == 2) \
pr_info("sn9c102: " fmt "\n", ## args); \
@@ -190,17 +187,18 @@
pr_debug("sn9c102: [%s:%d] " fmt "\n", __FUNCTION__, \
__LINE__ , ## args); \
} \
-}
+} while (0)
#else
-# define KDBG(level, fmt, args...) do {;} while(0);
-# define DBG(level, fmt, args...) do {;} while(0);
+# define DBG(level, fmt, args...) do {;} while(0)
+# define V4LDBG(level, name, cmd) do {;} while(0)
+# define KDBG(level, fmt, args...) do {;} while(0)
#endif
#undef PDBG
#define PDBG(fmt, args...) \
-dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args);
+dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args)
#undef PDBGG
-#define PDBGG(fmt, args...) do {;} while(0); /* placeholder */
+#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
#endif /* _SN9C102_H_ */
diff --git a/drivers/usb/media/sn9c102_core.c b/drivers/usb/media/sn9c102_core.c
index 8d1a1c3..c81397e 100644
--- a/drivers/usb/media/sn9c102_core.c
+++ b/drivers/usb/media/sn9c102_core.c
@@ -1,7 +1,7 @@
/***************************************************************************
* V4L2 driver for SN9C10x PC Camera Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
@@ -45,6 +45,15 @@
/*****************************************************************************/
+#define SN9C102_MODULE_NAME "V4L2 driver for SN9C10x PC Camera Controllers"
+#define SN9C102_MODULE_AUTHOR "(C) 2004-2006 Luca Risolia"
+#define SN9C102_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
+#define SN9C102_MODULE_LICENSE "GPL"
+#define SN9C102_MODULE_VERSION "1:1.26"
+#define SN9C102_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 26)
+
+/*****************************************************************************/
+
MODULE_DEVICE_TABLE(usb, sn9c102_id_table);
MODULE_AUTHOR(SN9C102_MODULE_AUTHOR " " SN9C102_AUTHOR_EMAIL);
@@ -70,10 +79,10 @@
SN9C102_FORCE_MUNMAP};
module_param_array(force_munmap, bool, NULL, 0444);
MODULE_PARM_DESC(force_munmap,
- "\n<0|1[,...]> Force the application to unmap previously "
- "\nmapped buffer memory before calling any VIDIOC_S_CROP or "
- "\nVIDIOC_S_FMT ioctl's. Not all the applications support "
- "\nthis feature. This parameter is specific for each "
+ "\n<0|1[,...]> Force the application to unmap previously"
+ "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
+ "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
+ "\nthis feature. This parameter is specific for each"
"\ndetected camera."
"\n 0 = do not force memory unmapping"
"\n 1 = force memory unmapping (save memory)"
@@ -102,6 +111,9 @@
{0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x01},
};
+static sn9c103_sof_header_t sn9c103_sof_header[] = {
+ {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x20},
+};
static sn9c102_eof_header_t sn9c102_eof_header[] = {
{0x00, 0x00, 0x00, 0x00},
@@ -112,50 +124,6 @@
/*****************************************************************************/
-static void* rvmalloc(size_t size)
-{
- void* mem;
- unsigned long adr;
-
- size = PAGE_ALIGN(size);
-
- mem = vmalloc_32((unsigned long)size);
- if (!mem)
- return NULL;
-
- memset(mem, 0, size);
-
- adr = (unsigned long)mem;
- while (size > 0) {
- SetPageReserved(vmalloc_to_page((void *)adr));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
-
- return mem;
-}
-
-
-static void rvfree(void* mem, size_t size)
-{
- unsigned long adr;
-
- if (!mem)
- return;
-
- size = PAGE_ALIGN(size);
-
- adr = (unsigned long)mem;
- while (size > 0) {
- ClearPageReserved(vmalloc_to_page((void *)adr));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
-
- vfree(mem);
-}
-
-
static u32
sn9c102_request_buffers(struct sn9c102_device* cam, u32 count,
enum sn9c102_io_method io)
@@ -174,7 +142,7 @@
cam->nbuffers = count;
while (cam->nbuffers > 0) {
- if ((buff = rvmalloc(cam->nbuffers * PAGE_ALIGN(imagesize))))
+ if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize))))
break;
cam->nbuffers--;
}
@@ -198,10 +166,10 @@
static void sn9c102_release_buffers(struct sn9c102_device* cam)
{
if (cam->nbuffers) {
- rvfree(cam->frame[0].bufmem,
- cam->nbuffers * PAGE_ALIGN(cam->frame[0].buf.length));
+ vfree(cam->frame[0].bufmem);
cam->nbuffers = 0;
}
+ cam->frame_current = NULL;
}
@@ -219,6 +187,19 @@
}
+static void sn9c102_requeue_outqueue(struct sn9c102_device* cam)
+{
+ struct sn9c102_frame_t *i;
+
+ list_for_each_entry(i, &cam->outqueue, frame) {
+ i->state = F_QUEUED;
+ list_add(&i->frame, &cam->inqueue);
+ }
+
+ INIT_LIST_HEAD(&cam->outqueue);
+}
+
+
static void sn9c102_queue_unusedframes(struct sn9c102_device* cam)
{
unsigned long lock_flags;
@@ -235,19 +216,46 @@
/*****************************************************************************/
+int sn9c102_write_regs(struct sn9c102_device* cam, u8* buff, u16 index)
+{
+ struct usb_device* udev = cam->usbdev;
+ int i, res;
+
+ if (index + sizeof(buff) >= ARRAY_SIZE(cam->reg))
+ return -1;
+
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
+ index, 0, buff, sizeof(buff),
+ SN9C102_CTRL_TIMEOUT*sizeof(buff));
+ if (res < 0) {
+ DBG(3, "Failed to write registers (index 0x%02X, error %d)",
+ index, res);
+ return -1;
+ }
+
+ for (i = 0; i < sizeof(buff); i++)
+ cam->reg[index+i] = buff[i];
+
+ return 0;
+}
+
+
int sn9c102_write_reg(struct sn9c102_device* cam, u8 value, u16 index)
{
struct usb_device* udev = cam->usbdev;
u8* buff = cam->control_buffer;
int res;
+ if (index >= ARRAY_SIZE(cam->reg))
+ return -1;
+
*buff = value;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
index, 0, buff, 1, SN9C102_CTRL_TIMEOUT);
if (res < 0) {
DBG(3, "Failed to write a register (value 0x%02X, index "
- "0x%02X, error %d)", value, index, res)
+ "0x%02X, error %d)", value, index, res);
return -1;
}
@@ -268,7 +276,7 @@
index, 0, buff, 1, SN9C102_CTRL_TIMEOUT);
if (res < 0)
DBG(3, "Failed to read a register (index 0x%02X, error %d)",
- index, res)
+ index, res);
return (res >= 0) ? (int)(*buff) : -1;
}
@@ -276,8 +284,8 @@
int sn9c102_pread_reg(struct sn9c102_device* cam, u16 index)
{
- if (index > 0x1f)
- return -EINVAL;
+ if (index >= ARRAY_SIZE(cam->reg))
+ return -1;
return cam->reg[index];
}
@@ -367,10 +375,10 @@
err += sn9c102_i2c_detect_read_error(cam, sensor);
PDBGG("I2C read: address 0x%02X, first read byte: 0x%02X", data1,
- data[4])
+ data[4]);
if (err) {
- DBG(3, "I2C read failed for %s image sensor", sensor->name)
+ DBG(3, "I2C read failed for %s image sensor", sensor->name);
return -1;
}
@@ -410,11 +418,11 @@
err += sn9c102_i2c_detect_write_error(cam, sensor);
if (err)
- DBG(3, "I2C write failed for %s image sensor", sensor->name)
+ DBG(3, "I2C write failed for %s image sensor", sensor->name);
PDBGG("I2C raw write: %u bytes, data0 = 0x%02X, data1 = 0x%02X, "
"data2 = 0x%02X, data3 = 0x%02X, data4 = 0x%02X, data5 = 0x%02X",
- n, data0, data1, data2, data3, data4, data5)
+ n, data0, data1, data2, data3, data4, data5);
return err ? -1 : 0;
}
@@ -461,13 +469,27 @@
static void*
sn9c102_find_sof_header(struct sn9c102_device* cam, void* mem, size_t len)
{
- size_t soflen = sizeof(sn9c102_sof_header_t), i;
- u8 j, n = sizeof(sn9c102_sof_header) / soflen;
+ size_t soflen = 0, i;
+ u8 j, n = 0;
- for (i = 0; (len >= soflen) && (i <= len - soflen); i++)
+ switch (cam->bridge) {
+ case BRIDGE_SN9C101:
+ case BRIDGE_SN9C102:
+ soflen = sizeof(sn9c102_sof_header_t);
+ n = sizeof(sn9c102_sof_header) / soflen;
+ break;
+ case BRIDGE_SN9C103:
+ soflen = sizeof(sn9c103_sof_header_t);
+ n = sizeof(sn9c103_sof_header) / soflen;
+ }
+
+ for (i = 0; (len >= soflen) && (i <= len - soflen); i++)
for (j = 0; j < n; j++)
- /* It's enough to compare 7 bytes */
- if (!memcmp(mem + i, sn9c102_sof_header[j], 7)) {
+ /* The invariable part of the header is 6 bytes long */
+ if ((cam->bridge != BRIDGE_SN9C103 &&
+ !memcmp(mem + i, sn9c102_sof_header[j], 6)) ||
+ (cam->bridge == BRIDGE_SN9C103 &&
+ !memcmp(mem + i, sn9c103_sof_header[j], 6))) {
memcpy(cam->sof_header, mem + i, soflen);
/* Skip the header */
return mem + i + soflen;
@@ -499,8 +521,7 @@
{
struct sn9c102_device* cam = urb->context;
struct sn9c102_frame_t** f;
- size_t imagesize;
- unsigned long lock_flags;
+ size_t imagesize, soflen;
u8 i;
int err = 0;
@@ -513,7 +534,7 @@
cam->stream = STREAM_OFF;
if ((*f))
(*f)->state = F_QUEUED;
- DBG(3, "Stream interrupted")
+ DBG(3, "Stream interrupted");
wake_up_interruptible(&cam->wait_stream);
}
@@ -536,6 +557,10 @@
cam->sensor->pix_format.height *
cam->sensor->pix_format.priv) / 8;
+ soflen = (cam->bridge) == BRIDGE_SN9C103 ?
+ sizeof(sn9c103_sof_header_t) :
+ sizeof(sn9c102_sof_header_t);
+
for (i = 0; i < urb->number_of_packets; i++) {
unsigned int img, len, status;
void *pos, *sof, *eof;
@@ -545,19 +570,12 @@
pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
if (status) {
- DBG(3, "Error in isochronous frame")
+ DBG(3, "Error in isochronous frame");
(*f)->state = F_ERROR;
continue;
}
- PDBGG("Isochrnous frame: length %u, #%u i", len, i)
-
- /*
- NOTE: It is probably correct to assume that SOF and EOF
- headers do not occur between two consecutive packets,
- but who knows..Whatever is the truth, this assumption
- doesn't introduce bugs.
- */
+ PDBGG("Isochrnous frame: length %u, #%u i", len, i);
redo:
sof = sn9c102_find_sof_header(cam, pos, len);
@@ -575,10 +593,10 @@
imagesize;
img = imagesize - (*f)->buf.bytesused;
DBG(3, "Expected EOF not found: "
- "video frame cut")
+ "video frame cut");
if (eof)
DBG(3, "Exceeded limit: +%u "
- "bytes", (unsigned)(b))
+ "bytes", (unsigned)(b));
}
memcpy((*f)->bufmem + (*f)->buf.bytesused, pos,
@@ -595,8 +613,7 @@
u32 b = (*f)->buf.bytesused;
(*f)->state = F_DONE;
(*f)->buf.sequence= ++cam->frame_count;
- spin_lock_irqsave(&cam->queue_lock,
- lock_flags);
+ spin_lock(&cam->queue_lock);
list_move_tail(&(*f)->frame,
&cam->outqueue);
if (!list_empty(&cam->inqueue))
@@ -606,13 +623,11 @@
frame );
else
(*f) = NULL;
- spin_unlock_irqrestore(&cam->queue_lock
- , lock_flags);
+ spin_unlock(&cam->queue_lock);
memcpy(cam->sysfs.frame_header,
- cam->sof_header,
- sizeof(sn9c102_sof_header_t));
- DBG(3, "Video frame captured: "
- "%lu bytes", (unsigned long)(b))
+ cam->sof_header, soflen);
+ DBG(3, "Video frame captured: %lu "
+ "bytes", (unsigned long)(b));
if (!(*f))
goto resubmit_urb;
@@ -621,18 +636,19 @@
(*f)->state = F_ERROR;
DBG(3, "Not expected EOF after %lu "
"bytes of image data",
- (unsigned long)((*f)->buf.bytesused))
+ (unsigned long)
+ ((*f)->buf.bytesused));
}
if (sof) /* (1) */
goto start_of_frame;
} else if (eof) {
- DBG(3, "EOF without SOF")
+ DBG(3, "EOF without SOF");
continue;
} else {
- PDBGG("Ignoring pointless isochronous frame")
+ PDBGG("Ignoring pointless isochronous frame");
continue;
}
@@ -642,7 +658,7 @@
(*f)->buf.bytesused = 0;
len -= (sof - pos);
pos = sof;
- DBG(3, "SOF detected: new video frame")
+ DBG(3, "SOF detected: new video frame");
if (len)
goto redo;
@@ -653,12 +669,13 @@
else {
if (cam->sensor->pix_format.pixelformat ==
V4L2_PIX_FMT_SN9C10X) {
- eof = sof-sizeof(sn9c102_sof_header_t);
+ eof = sof - soflen;
goto end_of_frame;
} else {
DBG(3, "SOF before expected EOF after "
"%lu bytes of image data",
- (unsigned long)((*f)->buf.bytesused))
+ (unsigned long)
+ ((*f)->buf.bytesused));
goto start_of_frame;
}
}
@@ -670,7 +687,7 @@
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0 && err != -EPERM) {
cam->state |= DEV_MISCONFIGURED;
- DBG(1, "usb_submit_urb() failed")
+ DBG(1, "usb_submit_urb() failed");
}
wake_up_interruptible(&cam->wait_frame);
@@ -681,18 +698,22 @@
{
struct usb_device *udev = cam->usbdev;
struct urb* urb;
- const unsigned int wMaxPacketSize[] = {0, 128, 256, 384, 512,
- 680, 800, 900, 1023};
- const unsigned int psz = wMaxPacketSize[SN9C102_ALTERNATE_SETTING];
+ const unsigned int sn9c102_wMaxPacketSize[] = {0, 128, 256, 384, 512,
+ 680, 800, 900, 1023};
+ const unsigned int sn9c103_wMaxPacketSize[] = {0, 128, 256, 384, 512,
+ 680, 800, 900, 1003};
+ const unsigned int psz = (cam->bridge == BRIDGE_SN9C103) ?
+ sn9c103_wMaxPacketSize[SN9C102_ALTERNATE_SETTING] :
+ sn9c102_wMaxPacketSize[SN9C102_ALTERNATE_SETTING];
s8 i, j;
int err = 0;
for (i = 0; i < SN9C102_URBS; i++) {
- cam->transfer_buffer[i] = kmalloc(SN9C102_ISO_PACKETS * psz,
+ cam->transfer_buffer[i] = kzalloc(SN9C102_ISO_PACKETS * psz,
GFP_KERNEL);
if (!cam->transfer_buffer[i]) {
err = -ENOMEM;
- DBG(1, "Not enough memory")
+ DBG(1, "Not enough memory");
goto free_buffers;
}
}
@@ -702,7 +723,7 @@
cam->urb[i] = urb;
if (!urb) {
err = -ENOMEM;
- DBG(1, "usb_alloc_urb() failed")
+ DBG(1, "usb_alloc_urb() failed");
goto free_urbs;
}
urb->dev = udev;
@@ -725,14 +746,14 @@
err = sn9c102_write_reg(cam, cam->reg[0x01] | 0x04, 0x01);
if (err) {
err = -EIO;
- DBG(1, "I/O hardware error")
+ DBG(1, "I/O hardware error");
goto free_urbs;
}
}
err = usb_set_interface(udev, 0, SN9C102_ALTERNATE_SETTING);
if (err) {
- DBG(1, "usb_set_interface() failed")
+ DBG(1, "usb_set_interface() failed");
goto free_urbs;
}
@@ -743,7 +764,7 @@
if (err) {
for (j = i-1; j >= 0; j--)
usb_kill_urb(cam->urb[j]);
- DBG(1, "usb_submit_urb() failed, error %d", err)
+ DBG(1, "usb_submit_urb() failed, error %d", err);
goto free_urbs;
}
}
@@ -779,7 +800,7 @@
err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */
if (err)
- DBG(3, "usb_set_interface() failed")
+ DBG(3, "usb_set_interface() failed");
return err;
}
@@ -799,7 +820,7 @@
else if (err) {
cam->state |= DEV_MISCONFIGURED;
DBG(1, "The camera is misconfigured. To use it, close and "
- "open /dev/video%d again.", cam->v4ldev->minor)
+ "open /dev/video%d again.", cam->v4ldev->minor);
return err;
}
@@ -808,6 +829,7 @@
/*****************************************************************************/
+#ifdef CONFIG_VIDEO_ADV_DEBUG
static u8 sn9c102_strtou8(const char* buff, size_t len, ssize_t* count)
{
char str[5];
@@ -885,8 +907,8 @@
cam->sysfs.reg = index;
- DBG(2, "Moved SN9C10X register index to 0x%02X", cam->sysfs.reg)
- DBG(3, "Written bytes: %zd", count)
+ DBG(2, "Moved SN9C10X register index to 0x%02X", cam->sysfs.reg);
+ DBG(3, "Written bytes: %zd", count);
up(&sn9c102_sysfs_lock);
@@ -916,7 +938,7 @@
count = sprintf(buf, "%d\n", val);
- DBG(3, "Read bytes: %zd", count)
+ DBG(3, "Read bytes: %zd", count);
up(&sn9c102_sysfs_lock);
@@ -954,8 +976,8 @@
}
DBG(2, "Written SN9C10X reg. 0x%02X, val. 0x%02X",
- cam->sysfs.reg, value)
- DBG(3, "Written bytes: %zd", count)
+ cam->sysfs.reg, value);
+ DBG(3, "Written bytes: %zd", count);
up(&sn9c102_sysfs_lock);
@@ -979,7 +1001,7 @@
count = sprintf(buf, "%u\n", cam->sysfs.i2c_reg);
- DBG(3, "Read bytes: %zd", count)
+ DBG(3, "Read bytes: %zd", count);
up(&sn9c102_sysfs_lock);
@@ -1011,8 +1033,8 @@
cam->sysfs.i2c_reg = index;
- DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg)
- DBG(3, "Written bytes: %zd", count)
+ DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg);
+ DBG(3, "Written bytes: %zd", count);
up(&sn9c102_sysfs_lock);
@@ -1047,7 +1069,7 @@
count = sprintf(buf, "%d\n", val);
- DBG(3, "Read bytes: %zd", count)
+ DBG(3, "Read bytes: %zd", count);
up(&sn9c102_sysfs_lock);
@@ -1090,8 +1112,8 @@
}
DBG(2, "Written sensor reg. 0x%02X, val. 0x%02X",
- cam->sysfs.i2c_reg, value)
- DBG(3, "Written bytes: %zd", count)
+ cam->sysfs.i2c_reg, value);
+ DBG(3, "Written bytes: %zd", count);
up(&sn9c102_sysfs_lock);
@@ -1193,7 +1215,7 @@
count = sizeof(cam->sysfs.frame_header);
memcpy(buf, cam->sysfs.frame_header, count);
- DBG(3, "Frame header, read bytes: %zd", count)
+ DBG(3, "Frame header, read bytes: %zd", count);
return count;
}
@@ -1227,11 +1249,12 @@
video_device_create_file(v4ldev, &class_device_attr_blue);
video_device_create_file(v4ldev, &class_device_attr_red);
}
- if (cam->sensor->sysfs_ops) {
+ if (cam->sensor && cam->sensor->sysfs_ops) {
video_device_create_file(v4ldev, &class_device_attr_i2c_reg);
video_device_create_file(v4ldev, &class_device_attr_i2c_val);
}
}
+#endif /* CONFIG_VIDEO_ADV_DEBUG */
/*****************************************************************************/
@@ -1281,7 +1304,7 @@
if (err)
return -EIO;
- PDBGG("Scaling factor: %u", scale)
+ PDBGG("Scaling factor: %u", scale);
return 0;
}
@@ -1304,7 +1327,7 @@
return -EIO;
PDBGG("h_start, v_start, h_size, v_size, ho_size, vo_size "
- "%u %u %u %u", h_start, v_start, h_size, v_size)
+ "%u %u %u %u", h_start, v_start, h_size, v_size);
return 0;
}
@@ -1336,7 +1359,7 @@
if (s->init) {
err = s->init(cam);
if (err) {
- DBG(3, "Sensor initialization failed")
+ DBG(3, "Sensor initialization failed");
return err;
}
}
@@ -1353,13 +1376,13 @@
if (s->pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X)
DBG(3, "Compressed video format is active, quality %d",
- cam->compression.quality)
+ cam->compression.quality);
else
- DBG(3, "Uncompressed video format is active")
+ DBG(3, "Uncompressed video format is active");
if (s->set_crop)
if ((err = s->set_crop(cam, rect))) {
- DBG(3, "set_crop() failed")
+ DBG(3, "set_crop() failed");
return err;
}
@@ -1372,11 +1395,11 @@
err = s->set_ctrl(cam, &ctrl);
if (err) {
DBG(3, "Set %s control failed",
- s->qctrl[i].name)
+ s->qctrl[i].name);
return err;
}
DBG(3, "Image sensor supports '%s' control",
- s->qctrl[i].name)
+ s->qctrl[i].name);
}
}
@@ -1392,7 +1415,7 @@
cam->state |= DEV_INITIALIZED;
}
- DBG(2, "Initialization succeeded")
+ DBG(2, "Initialization succeeded");
return 0;
}
@@ -1401,7 +1424,7 @@
{
down(&sn9c102_sysfs_lock);
- DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor)
+ DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
video_set_drvdata(cam->v4ldev, NULL);
video_unregister_device(cam->v4ldev);
@@ -1432,7 +1455,7 @@
}
if (cam->users) {
- DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor)
+ DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor);
if ((filp->f_flags & O_NONBLOCK) ||
(filp->f_flags & O_NDELAY)) {
err = -EWOULDBLOCK;
@@ -1458,7 +1481,7 @@
err = sn9c102_init(cam);
if (err) {
DBG(1, "Initialization failed again. "
- "I will retry on next open().")
+ "I will retry on next open().");
goto out;
}
cam->state &= ~DEV_MISCONFIGURED;
@@ -1475,7 +1498,7 @@
cam->frame_count = 0;
sn9c102_empty_framequeues(cam);
- DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor)
+ DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
out:
up(&cam->dev_sem);
@@ -1504,7 +1527,7 @@
cam->users--;
wake_up_interruptible_nr(&cam->open, 1);
- DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor)
+ DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
up(&cam->dev_sem);
@@ -1524,32 +1547,38 @@
return -ERESTARTSYS;
if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present")
+ DBG(1, "Device not present");
up(&cam->fileop_sem);
return -ENODEV;
}
if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it again.")
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
up(&cam->fileop_sem);
return -EIO;
}
if (cam->io == IO_MMAP) {
DBG(3, "Close and open the device again to choose "
- "the read method")
+ "the read method");
up(&cam->fileop_sem);
return -EINVAL;
}
if (cam->io == IO_NONE) {
if (!sn9c102_request_buffers(cam,cam->nreadbuffers, IO_READ)) {
- DBG(1, "read() failed, not enough memory")
+ DBG(1, "read() failed, not enough memory");
up(&cam->fileop_sem);
return -ENOMEM;
}
cam->io = IO_READ;
cam->stream = STREAM_ON;
+ }
+
+ if (list_empty(&cam->inqueue)) {
+ if (!list_empty(&cam->outqueue))
+ sn9c102_empty_framequeues(cam);
sn9c102_queue_unusedframes(cam);
}
@@ -1584,6 +1613,16 @@
f = list_entry(cam->outqueue.prev, struct sn9c102_frame_t, frame);
+ if (count > f->buf.bytesused)
+ count = f->buf.bytesused;
+
+ if (copy_to_user(buf, f->bufmem, count)) {
+ err = -EFAULT;
+ goto exit;
+ }
+ *f_pos += count;
+
+exit:
spin_lock_irqsave(&cam->queue_lock, lock_flags);
list_for_each_entry(i, &cam->outqueue, frame)
i->state = F_UNUSED;
@@ -1592,16 +1631,8 @@
sn9c102_queue_unusedframes(cam);
- if (count > f->buf.bytesused)
- count = f->buf.bytesused;
-
- if (copy_to_user(buf, f->bufmem, count)) {
- up(&cam->fileop_sem);
- return -EFAULT;
- }
- *f_pos += count;
-
- PDBGG("Frame #%lu, bytes read: %zu", (unsigned long)f->buf.index,count)
+ PDBGG("Frame #%lu, bytes read: %zu",
+ (unsigned long)f->buf.index, count);
up(&cam->fileop_sem);
@@ -1612,33 +1643,42 @@
static unsigned int sn9c102_poll(struct file *filp, poll_table *wait)
{
struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
+ struct sn9c102_frame_t* f;
+ unsigned long lock_flags;
unsigned int mask = 0;
if (down_interruptible(&cam->fileop_sem))
return POLLERR;
if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present")
+ DBG(1, "Device not present");
goto error;
}
if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it again.")
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
goto error;
}
if (cam->io == IO_NONE) {
if (!sn9c102_request_buffers(cam, cam->nreadbuffers,
IO_READ)) {
- DBG(1, "poll() failed, not enough memory")
+ DBG(1, "poll() failed, not enough memory");
goto error;
}
cam->io = IO_READ;
cam->stream = STREAM_ON;
}
- if (cam->io == IO_READ)
+ if (cam->io == IO_READ) {
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ list_for_each_entry(f, &cam->outqueue, frame)
+ f->state = F_UNUSED;
+ INIT_LIST_HEAD(&cam->outqueue);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
sn9c102_queue_unusedframes(cam);
+ }
poll_wait(filp, &cam->wait_frame, wait);
@@ -1680,22 +1720,22 @@
{
struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
unsigned long size = vma->vm_end - vma->vm_start,
- start = vma->vm_start,
- pos,
- page;
+ start = vma->vm_start;
+ void *pos;
u32 i;
if (down_interruptible(&cam->fileop_sem))
return -ERESTARTSYS;
if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present")
+ DBG(1, "Device not present");
up(&cam->fileop_sem);
return -ENODEV;
}
if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it again.")
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
up(&cam->fileop_sem);
return -EIO;
}
@@ -1715,15 +1755,12 @@
return -EINVAL;
}
- /* VM_IO is eventually going to replace PageReserved altogether */
vma->vm_flags |= VM_IO;
- vma->vm_flags |= VM_RESERVED; /* avoid to swap out this VMA */
+ vma->vm_flags |= VM_RESERVED;
- pos = (unsigned long)cam->frame[i].bufmem;
+ pos = cam->frame[i].bufmem;
while (size > 0) { /* size is page-aligned */
- page = vmalloc_to_pfn((void *)pos);
- if (remap_pfn_range(vma, start, page, PAGE_SIZE,
- vma->vm_page_prot)) {
+ if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
up(&cam->fileop_sem);
return -EAGAIN;
}
@@ -1742,6 +1779,783 @@
return 0;
}
+/*****************************************************************************/
+
+static int
+sn9c102_vidioc_querycap(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_capability cap = {
+ .driver = "sn9c102",
+ .version = SN9C102_MODULE_VERSION_CODE,
+ .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+ V4L2_CAP_STREAMING,
+ };
+
+ strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
+ if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
+ strlcpy(cap.bus_info, cam->usbdev->dev.bus_id,
+ sizeof(cap.bus_info));
+
+ if (copy_to_user(arg, &cap, sizeof(cap)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_enuminput(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_input i;
+
+ if (copy_from_user(&i, arg, sizeof(i)))
+ return -EFAULT;
+
+ if (i.index)
+ return -EINVAL;
+
+ memset(&i, 0, sizeof(i));
+ strcpy(i.name, "Camera");
+
+ if (copy_to_user(arg, &i, sizeof(i)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_gs_input(struct sn9c102_device* cam, void __user * arg)
+{
+ int index;
+
+ if (copy_from_user(&index, arg, sizeof(index)))
+ return -EFAULT;
+
+ if (index != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_query_ctrl(struct sn9c102_device* cam, void __user * arg)
+{
+ struct sn9c102_sensor* s = cam->sensor;
+ struct v4l2_queryctrl qc;
+ u8 i;
+
+ if (copy_from_user(&qc, arg, sizeof(qc)))
+ return -EFAULT;
+
+ for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+ if (qc.id && qc.id == s->qctrl[i].id) {
+ memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
+ if (copy_to_user(arg, &qc, sizeof(qc)))
+ return -EFAULT;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+
+static int
+sn9c102_vidioc_g_ctrl(struct sn9c102_device* cam, void __user * arg)
+{
+ struct sn9c102_sensor* s = cam->sensor;
+ struct v4l2_control ctrl;
+ int err = 0;
+ u8 i;
+
+ if (!s->get_ctrl && !s->set_ctrl)
+ return -EINVAL;
+
+ if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+ return -EFAULT;
+
+ if (!s->get_ctrl) {
+ for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+ if (ctrl.id && ctrl.id == s->qctrl[i].id) {
+ ctrl.value = s->_qctrl[i].default_value;
+ goto exit;
+ }
+ return -EINVAL;
+ } else
+ err = s->get_ctrl(cam, &ctrl);
+
+exit:
+ if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
+ return -EFAULT;
+
+ return err;
+}
+
+
+static int
+sn9c102_vidioc_s_ctrl(struct sn9c102_device* cam, void __user * arg)
+{
+ struct sn9c102_sensor* s = cam->sensor;
+ struct v4l2_control ctrl;
+ u8 i;
+ int err = 0;
+
+ if (!s->set_ctrl)
+ return -EINVAL;
+
+ if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+ return -EFAULT;
+
+ for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+ if (ctrl.id == s->qctrl[i].id) {
+ if (ctrl.value < s->qctrl[i].minimum ||
+ ctrl.value > s->qctrl[i].maximum)
+ return -ERANGE;
+ ctrl.value -= ctrl.value % s->qctrl[i].step;
+ break;
+ }
+
+ if ((err = s->set_ctrl(cam, &ctrl)))
+ return err;
+
+ s->_qctrl[i].default_value = ctrl.value;
+
+ PDBGG("VIDIOC_S_CTRL: id %lu, value %lu",
+ (unsigned long)ctrl.id, (unsigned long)ctrl.value);
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_cropcap(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_cropcap* cc = &(cam->sensor->cropcap);
+
+ cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ cc->pixelaspect.numerator = 1;
+ cc->pixelaspect.denominator = 1;
+
+ if (copy_to_user(arg, cc, sizeof(*cc)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_crop(struct sn9c102_device* cam, void __user * arg)
+{
+ struct sn9c102_sensor* s = cam->sensor;
+ struct v4l2_crop crop = {
+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ };
+
+ memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
+
+ if (copy_to_user(arg, &crop, sizeof(crop)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_s_crop(struct sn9c102_device* cam, void __user * arg)
+{
+ struct sn9c102_sensor* s = cam->sensor;
+ struct v4l2_crop crop;
+ struct v4l2_rect* rect;
+ struct v4l2_rect* bounds = &(s->cropcap.bounds);
+ struct v4l2_pix_format* pix_format = &(s->pix_format);
+ u8 scale;
+ const enum sn9c102_stream_state stream = cam->stream;
+ const u32 nbuffers = cam->nbuffers;
+ u32 i;
+ int err = 0;
+
+ if (copy_from_user(&crop, arg, sizeof(crop)))
+ return -EFAULT;
+
+ rect = &(crop.c);
+
+ if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (cam->module_param.force_munmap)
+ for (i = 0; i < cam->nbuffers; i++)
+ if (cam->frame[i].vma_use_count) {
+ DBG(3, "VIDIOC_S_CROP failed. "
+ "Unmap the buffers first.");
+ return -EINVAL;
+ }
+
+ /* Preserve R,G or B origin */
+ rect->left = (s->_rect.left & 1L) ? rect->left | 1L : rect->left & ~1L;
+ rect->top = (s->_rect.top & 1L) ? rect->top | 1L : rect->top & ~1L;
+
+ if (rect->width < 16)
+ rect->width = 16;
+ if (rect->height < 16)
+ rect->height = 16;
+ if (rect->width > bounds->width)
+ rect->width = bounds->width;
+ if (rect->height > bounds->height)
+ rect->height = bounds->height;
+ if (rect->left < bounds->left)
+ rect->left = bounds->left;
+ if (rect->top < bounds->top)
+ rect->top = bounds->top;
+ if (rect->left + rect->width > bounds->left + bounds->width)
+ rect->left = bounds->left+bounds->width - rect->width;
+ if (rect->top + rect->height > bounds->top + bounds->height)
+ rect->top = bounds->top+bounds->height - rect->height;
+
+ rect->width &= ~15L;
+ rect->height &= ~15L;
+
+ if (SN9C102_PRESERVE_IMGSCALE) {
+ /* Calculate the actual scaling factor */
+ u32 a, b;
+ a = rect->width * rect->height;
+ b = pix_format->width * pix_format->height;
+ scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1;
+ } else
+ scale = 1;
+
+ if (cam->stream == STREAM_ON)
+ if ((err = sn9c102_stream_interrupt(cam)))
+ return err;
+
+ if (copy_to_user(arg, &crop, sizeof(crop))) {
+ cam->stream = stream;
+ return -EFAULT;
+ }
+
+ if (cam->module_param.force_munmap || cam->io == IO_READ)
+ sn9c102_release_buffers(cam);
+
+ err = sn9c102_set_crop(cam, rect);
+ if (s->set_crop)
+ err += s->set_crop(cam, rect);
+ err += sn9c102_set_scale(cam, scale);
+
+ if (err) { /* atomic, no rollback in ioctl() */
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -EIO;
+ }
+
+ s->pix_format.width = rect->width/scale;
+ s->pix_format.height = rect->height/scale;
+ memcpy(&(s->_rect), rect, sizeof(*rect));
+
+ if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
+ nbuffers != sn9c102_request_buffers(cam, nbuffers, cam->io)) {
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -ENOMEM;
+ }
+
+ if (cam->io == IO_READ)
+ sn9c102_empty_framequeues(cam);
+ else if (cam->module_param.force_munmap)
+ sn9c102_requeue_outqueue(cam);
+
+ cam->stream = stream;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_enum_fmt(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_fmtdesc fmtd;
+
+ if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
+ return -EFAULT;
+
+ if (fmtd.index == 0) {
+ strcpy(fmtd.description, "bayer rgb");
+ fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8;
+ } else if (fmtd.index == 1) {
+ strcpy(fmtd.description, "compressed");
+ fmtd.pixelformat = V4L2_PIX_FMT_SN9C10X;
+ fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
+ } else
+ return -EINVAL;
+
+ fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
+
+ if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_fmt(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_format format;
+ struct v4l2_pix_format* pfmt = &(cam->sensor->pix_format);
+
+ if (copy_from_user(&format, arg, sizeof(format)))
+ return -EFAULT;
+
+ if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_SN9C10X)
+ ? 0 : (pfmt->width * pfmt->priv) / 8;
+ pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
+ pfmt->field = V4L2_FIELD_NONE;
+ memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
+
+ if (copy_to_user(arg, &format, sizeof(format)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd,
+ void __user * arg)
+{
+ struct sn9c102_sensor* s = cam->sensor;
+ struct v4l2_format format;
+ struct v4l2_pix_format* pix;
+ struct v4l2_pix_format* pfmt = &(s->pix_format);
+ struct v4l2_rect* bounds = &(s->cropcap.bounds);
+ struct v4l2_rect rect;
+ u8 scale;
+ const enum sn9c102_stream_state stream = cam->stream;
+ const u32 nbuffers = cam->nbuffers;
+ u32 i;
+ int err = 0;
+
+ if (copy_from_user(&format, arg, sizeof(format)))
+ return -EFAULT;
+
+ pix = &(format.fmt.pix);
+
+ if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ memcpy(&rect, &(s->_rect), sizeof(rect));
+
+ { /* calculate the actual scaling factor */
+ u32 a, b;
+ a = rect.width * rect.height;
+ b = pix->width * pix->height;
+ scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1;
+ }
+
+ rect.width = scale * pix->width;
+ rect.height = scale * pix->height;
+
+ if (rect.width < 16)
+ rect.width = 16;
+ if (rect.height < 16)
+ rect.height = 16;
+ if (rect.width > bounds->left + bounds->width - rect.left)
+ rect.width = bounds->left + bounds->width - rect.left;
+ if (rect.height > bounds->top + bounds->height - rect.top)
+ rect.height = bounds->top + bounds->height - rect.top;
+
+ rect.width &= ~15L;
+ rect.height &= ~15L;
+
+ { /* adjust the scaling factor */
+ u32 a, b;
+ a = rect.width * rect.height;
+ b = pix->width * pix->height;
+ scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1;
+ }
+
+ pix->width = rect.width / scale;
+ pix->height = rect.height / scale;
+
+ if (pix->pixelformat != V4L2_PIX_FMT_SN9C10X &&
+ pix->pixelformat != V4L2_PIX_FMT_SBGGR8)
+ pix->pixelformat = pfmt->pixelformat;
+ pix->priv = pfmt->priv; /* bpp */
+ pix->colorspace = pfmt->colorspace;
+ pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+ ? 0 : (pix->width * pix->priv) / 8;
+ pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
+ pix->field = V4L2_FIELD_NONE;
+
+ if (cmd == VIDIOC_TRY_FMT) {
+ if (copy_to_user(arg, &format, sizeof(format)))
+ return -EFAULT;
+ return 0;
+ }
+
+ if (cam->module_param.force_munmap)
+ for (i = 0; i < cam->nbuffers; i++)
+ if (cam->frame[i].vma_use_count) {
+ DBG(3, "VIDIOC_S_FMT failed. Unmap the "
+ "buffers first.");
+ return -EINVAL;
+ }
+
+ if (cam->stream == STREAM_ON)
+ if ((err = sn9c102_stream_interrupt(cam)))
+ return err;
+
+ if (copy_to_user(arg, &format, sizeof(format))) {
+ cam->stream = stream;
+ return -EFAULT;
+ }
+
+ if (cam->module_param.force_munmap || cam->io == IO_READ)
+ sn9c102_release_buffers(cam);
+
+ err += sn9c102_set_pix_format(cam, pix);
+ err += sn9c102_set_crop(cam, &rect);
+ if (s->set_pix_format)
+ err += s->set_pix_format(cam, pix);
+ if (s->set_crop)
+ err += s->set_crop(cam, &rect);
+ err += sn9c102_set_scale(cam, scale);
+
+ if (err) { /* atomic, no rollback in ioctl() */
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -EIO;
+ }
+
+ memcpy(pfmt, pix, sizeof(*pix));
+ memcpy(&(s->_rect), &rect, sizeof(rect));
+
+ if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
+ nbuffers != sn9c102_request_buffers(cam, nbuffers, cam->io)) {
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -ENOMEM;
+ }
+
+ if (cam->io == IO_READ)
+ sn9c102_empty_framequeues(cam);
+ else if (cam->module_param.force_munmap)
+ sn9c102_requeue_outqueue(cam);
+
+ cam->stream = stream;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_jpegcomp(struct sn9c102_device* cam, void __user * arg)
+{
+ if (copy_to_user(arg, &cam->compression,
+ sizeof(cam->compression)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_s_jpegcomp(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_jpegcompression jc;
+ const enum sn9c102_stream_state stream = cam->stream;
+ int err = 0;
+
+ if (copy_from_user(&jc, arg, sizeof(jc)))
+ return -EFAULT;
+
+ if (jc.quality != 0 && jc.quality != 1)
+ return -EINVAL;
+
+ if (cam->stream == STREAM_ON)
+ if ((err = sn9c102_stream_interrupt(cam)))
+ return err;
+
+ err += sn9c102_set_compression(cam, &jc);
+ if (err) { /* atomic, no rollback in ioctl() */
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
+ "problems. To use the camera, close and open "
+ "/dev/video%d again.", cam->v4ldev->minor);
+ return -EIO;
+ }
+
+ cam->compression.quality = jc.quality;
+
+ cam->stream = stream;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_reqbufs(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_requestbuffers rb;
+ u32 i;
+ int err;
+
+ if (copy_from_user(&rb, arg, sizeof(rb)))
+ return -EFAULT;
+
+ if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ rb.memory != V4L2_MEMORY_MMAP)
+ return -EINVAL;
+
+ if (cam->io == IO_READ) {
+ DBG(3, "Close and open the device again to choose the mmap "
+ "I/O method");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < cam->nbuffers; i++)
+ if (cam->frame[i].vma_use_count) {
+ DBG(3, "VIDIOC_REQBUFS failed. Previous buffers are "
+ "still mapped.");
+ return -EINVAL;
+ }
+
+ if (cam->stream == STREAM_ON)
+ if ((err = sn9c102_stream_interrupt(cam)))
+ return err;
+
+ sn9c102_empty_framequeues(cam);
+
+ sn9c102_release_buffers(cam);
+ if (rb.count)
+ rb.count = sn9c102_request_buffers(cam, rb.count, IO_MMAP);
+
+ if (copy_to_user(arg, &rb, sizeof(rb))) {
+ sn9c102_release_buffers(cam);
+ cam->io = IO_NONE;
+ return -EFAULT;
+ }
+
+ cam->io = rb.count ? IO_MMAP : IO_NONE;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_querybuf(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_buffer b;
+
+ if (copy_from_user(&b, arg, sizeof(b)))
+ return -EFAULT;
+
+ if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ b.index >= cam->nbuffers || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
+
+ if (cam->frame[b.index].vma_use_count)
+ b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+ if (cam->frame[b.index].state == F_DONE)
+ b.flags |= V4L2_BUF_FLAG_DONE;
+ else if (cam->frame[b.index].state != F_UNUSED)
+ b.flags |= V4L2_BUF_FLAG_QUEUED;
+
+ if (copy_to_user(arg, &b, sizeof(b)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_qbuf(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_buffer b;
+ unsigned long lock_flags;
+
+ if (copy_from_user(&b, arg, sizeof(b)))
+ return -EFAULT;
+
+ if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ b.index >= cam->nbuffers || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ if (cam->frame[b.index].state != F_UNUSED)
+ return -EINVAL;
+
+ cam->frame[b.index].state = F_QUEUED;
+
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+ PDBGG("Frame #%lu queued", (unsigned long)b.index);
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_dqbuf(struct sn9c102_device* cam, struct file* filp,
+ void __user * arg)
+{
+ struct v4l2_buffer b;
+ struct sn9c102_frame_t *f;
+ unsigned long lock_flags;
+ int err = 0;
+
+ if (copy_from_user(&b, arg, sizeof(b)))
+ return -EFAULT;
+
+ if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ if (list_empty(&cam->outqueue)) {
+ if (cam->stream == STREAM_OFF)
+ return -EINVAL;
+ if (filp->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+ err = wait_event_interruptible
+ ( cam->wait_frame,
+ (!list_empty(&cam->outqueue)) ||
+ (cam->state & DEV_DISCONNECTED) ||
+ (cam->state & DEV_MISCONFIGURED) );
+ if (err)
+ return err;
+ if (cam->state & DEV_DISCONNECTED)
+ return -ENODEV;
+ if (cam->state & DEV_MISCONFIGURED)
+ return -EIO;
+ }
+
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ f = list_entry(cam->outqueue.next, struct sn9c102_frame_t, frame);
+ list_del(cam->outqueue.next);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+ f->state = F_UNUSED;
+
+ memcpy(&b, &f->buf, sizeof(b));
+ if (f->vma_use_count)
+ b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+ if (copy_to_user(arg, &b, sizeof(b)))
+ return -EFAULT;
+
+ PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index);
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_streamon(struct sn9c102_device* cam, void __user * arg)
+{
+ int type;
+
+ if (copy_from_user(&type, arg, sizeof(type)))
+ return -EFAULT;
+
+ if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ if (list_empty(&cam->inqueue))
+ return -EINVAL;
+
+ cam->stream = STREAM_ON;
+
+ DBG(3, "Stream on");
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_streamoff(struct sn9c102_device* cam, void __user * arg)
+{
+ int type, err;
+
+ if (copy_from_user(&type, arg, sizeof(type)))
+ return -EFAULT;
+
+ if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ if (cam->stream == STREAM_ON)
+ if ((err = sn9c102_stream_interrupt(cam)))
+ return err;
+
+ sn9c102_empty_framequeues(cam);
+
+ DBG(3, "Stream off");
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_parm(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_streamparm sp;
+
+ if (copy_from_user(&sp, arg, sizeof(sp)))
+ return -EFAULT;
+
+ if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ sp.parm.capture.extendedmode = 0;
+ sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+ if (copy_to_user(arg, &sp, sizeof(sp)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_s_parm(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_streamparm sp;
+
+ if (copy_from_user(&sp, arg, sizeof(sp)))
+ return -EFAULT;
+
+ if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ sp.parm.capture.extendedmode = 0;
+
+ if (sp.parm.capture.readbuffers == 0)
+ sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+ if (sp.parm.capture.readbuffers > SN9C102_MAX_FRAMES)
+ sp.parm.capture.readbuffers = SN9C102_MAX_FRAMES;
+
+ if (copy_to_user(arg, &sp, sizeof(sp)))
+ return -EFAULT;
+
+ cam->nreadbuffers = sp.parm.capture.readbuffers;
+
+ return 0;
+}
+
static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp,
unsigned int cmd, void __user * arg)
@@ -1751,729 +2565,75 @@
switch (cmd) {
case VIDIOC_QUERYCAP:
- {
- struct v4l2_capability cap = {
- .driver = "sn9c102",
- .version = SN9C102_MODULE_VERSION_CODE,
- .capabilities = V4L2_CAP_VIDEO_CAPTURE |
- V4L2_CAP_READWRITE |
- V4L2_CAP_STREAMING,
- };
-
- strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
- if (usb_make_path(cam->usbdev, cap.bus_info,
- sizeof(cap.bus_info)) < 0)
- strlcpy(cap.bus_info, cam->dev.bus_id,
- sizeof(cap.bus_info));
-
- if (copy_to_user(arg, &cap, sizeof(cap)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_querycap(cam, arg);
case VIDIOC_ENUMINPUT:
- {
- struct v4l2_input i;
-
- if (copy_from_user(&i, arg, sizeof(i)))
- return -EFAULT;
-
- if (i.index)
- return -EINVAL;
-
- memset(&i, 0, sizeof(i));
- strcpy(i.name, "USB");
-
- if (copy_to_user(arg, &i, sizeof(i)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_enuminput(cam, arg);
case VIDIOC_G_INPUT:
case VIDIOC_S_INPUT:
- {
- int index;
-
- if (copy_from_user(&index, arg, sizeof(index)))
- return -EFAULT;
-
- if (index != 0)
- return -EINVAL;
-
- return 0;
- }
+ return sn9c102_vidioc_gs_input(cam, arg);
case VIDIOC_QUERYCTRL:
- {
- struct sn9c102_sensor* s = cam->sensor;
- struct v4l2_queryctrl qc;
- u8 i;
-
- if (copy_from_user(&qc, arg, sizeof(qc)))
- return -EFAULT;
-
- for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
- if (qc.id && qc.id == s->qctrl[i].id) {
- memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
- if (copy_to_user(arg, &qc, sizeof(qc)))
- return -EFAULT;
- return 0;
- }
-
- return -EINVAL;
- }
+ return sn9c102_vidioc_query_ctrl(cam, arg);
case VIDIOC_G_CTRL:
- {
- struct sn9c102_sensor* s = cam->sensor;
- struct v4l2_control ctrl;
- int err = 0;
-
- if (!s->get_ctrl)
- return -EINVAL;
-
- if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
- return -EFAULT;
-
- err = s->get_ctrl(cam, &ctrl);
-
- if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
- return -EFAULT;
-
- return err;
- }
+ return sn9c102_vidioc_g_ctrl(cam, arg);
case VIDIOC_S_CTRL_OLD:
case VIDIOC_S_CTRL:
- {
- struct sn9c102_sensor* s = cam->sensor;
- struct v4l2_control ctrl;
- u8 i;
- int err = 0;
+ return sn9c102_vidioc_s_ctrl(cam, arg);
- if (!s->set_ctrl)
- return -EINVAL;
-
- if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
- return -EFAULT;
-
- for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
- if (ctrl.id == s->qctrl[i].id) {
- if (ctrl.value < s->qctrl[i].minimum ||
- ctrl.value > s->qctrl[i].maximum)
- return -ERANGE;
- ctrl.value -= ctrl.value % s->qctrl[i].step;
- break;
- }
-
- if ((err = s->set_ctrl(cam, &ctrl)))
- return err;
-
- s->_qctrl[i].default_value = ctrl.value;
-
- PDBGG("VIDIOC_S_CTRL: id %lu, value %lu",
- (unsigned long)ctrl.id, (unsigned long)ctrl.value)
-
- return 0;
- }
-
+ case VIDIOC_CROPCAP_OLD:
case VIDIOC_CROPCAP:
- {
- struct v4l2_cropcap* cc = &(cam->sensor->cropcap);
-
- cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- cc->pixelaspect.numerator = 1;
- cc->pixelaspect.denominator = 1;
-
- if (copy_to_user(arg, cc, sizeof(*cc)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_cropcap(cam, arg);
case VIDIOC_G_CROP:
- {
- struct sn9c102_sensor* s = cam->sensor;
- struct v4l2_crop crop = {
- .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
- };
-
- memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
-
- if (copy_to_user(arg, &crop, sizeof(crop)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_g_crop(cam, arg);
case VIDIOC_S_CROP:
- {
- struct sn9c102_sensor* s = cam->sensor;
- struct v4l2_crop crop;
- struct v4l2_rect* rect;
- struct v4l2_rect* bounds = &(s->cropcap.bounds);
- struct v4l2_pix_format* pix_format = &(s->pix_format);
- u8 scale;
- const enum sn9c102_stream_state stream = cam->stream;
- const u32 nbuffers = cam->nbuffers;
- u32 i;
- int err = 0;
-
- if (copy_from_user(&crop, arg, sizeof(crop)))
- return -EFAULT;
-
- rect = &(crop.c);
-
- if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- if (cam->module_param.force_munmap)
- for (i = 0; i < cam->nbuffers; i++)
- if (cam->frame[i].vma_use_count) {
- DBG(3, "VIDIOC_S_CROP failed. "
- "Unmap the buffers first.")
- return -EINVAL;
- }
-
- /* Preserve R,G or B origin */
- rect->left = (s->_rect.left & 1L) ?
- rect->left | 1L : rect->left & ~1L;
- rect->top = (s->_rect.top & 1L) ?
- rect->top | 1L : rect->top & ~1L;
-
- if (rect->width < 16)
- rect->width = 16;
- if (rect->height < 16)
- rect->height = 16;
- if (rect->width > bounds->width)
- rect->width = bounds->width;
- if (rect->height > bounds->height)
- rect->height = bounds->height;
- if (rect->left < bounds->left)
- rect->left = bounds->left;
- if (rect->top < bounds->top)
- rect->top = bounds->top;
- if (rect->left + rect->width > bounds->left + bounds->width)
- rect->left = bounds->left+bounds->width - rect->width;
- if (rect->top + rect->height > bounds->top + bounds->height)
- rect->top = bounds->top+bounds->height - rect->height;
-
- rect->width &= ~15L;
- rect->height &= ~15L;
-
- if (SN9C102_PRESERVE_IMGSCALE) {
- /* Calculate the actual scaling factor */
- u32 a, b;
- a = rect->width * rect->height;
- b = pix_format->width * pix_format->height;
- scale = b ? (u8)((a / b) < 4 ? 1 :
- ((a / b) < 16 ? 2 : 4)) : 1;
- } else
- scale = 1;
-
- if (cam->stream == STREAM_ON)
- if ((err = sn9c102_stream_interrupt(cam)))
- return err;
-
- if (copy_to_user(arg, &crop, sizeof(crop))) {
- cam->stream = stream;
- return -EFAULT;
- }
-
- if (cam->module_param.force_munmap || cam->io == IO_READ)
- sn9c102_release_buffers(cam);
-
- err = sn9c102_set_crop(cam, rect);
- if (s->set_crop)
- err += s->set_crop(cam, rect);
- err += sn9c102_set_scale(cam, scale);
-
- if (err) { /* atomic, no rollback in ioctl() */
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_CROP failed because of hardware "
- "problems. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->minor)
- return -EIO;
- }
-
- s->pix_format.width = rect->width/scale;
- s->pix_format.height = rect->height/scale;
- memcpy(&(s->_rect), rect, sizeof(*rect));
-
- if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
- nbuffers != sn9c102_request_buffers(cam, nbuffers,
- cam->io)) {
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_CROP failed because of not enough "
- "memory. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->minor)
- return -ENOMEM;
- }
-
- cam->stream = stream;
-
- return 0;
- }
+ return sn9c102_vidioc_s_crop(cam, arg);
case VIDIOC_ENUM_FMT:
- {
- struct v4l2_fmtdesc fmtd;
-
- if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
- return -EFAULT;
-
- if (fmtd.index == 0) {
- strcpy(fmtd.description, "bayer rgb");
- fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8;
- } else if (fmtd.index == 1) {
- strcpy(fmtd.description, "compressed");
- fmtd.pixelformat = V4L2_PIX_FMT_SN9C10X;
- fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
- } else
- return -EINVAL;
-
- fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
-
- if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_enum_fmt(cam, arg);
case VIDIOC_G_FMT:
- {
- struct v4l2_format format;
- struct v4l2_pix_format* pfmt = &(cam->sensor->pix_format);
-
- if (copy_from_user(&format, arg, sizeof(format)))
- return -EFAULT;
-
- if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_SN9C10X)
- ? 0 : (pfmt->width * pfmt->priv) / 8;
- pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
- pfmt->field = V4L2_FIELD_NONE;
- memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
-
- if (copy_to_user(arg, &format, sizeof(format)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_g_fmt(cam, arg);
case VIDIOC_TRY_FMT:
case VIDIOC_S_FMT:
- {
- struct sn9c102_sensor* s = cam->sensor;
- struct v4l2_format format;
- struct v4l2_pix_format* pix;
- struct v4l2_pix_format* pfmt = &(s->pix_format);
- struct v4l2_rect* bounds = &(s->cropcap.bounds);
- struct v4l2_rect rect;
- u8 scale;
- const enum sn9c102_stream_state stream = cam->stream;
- const u32 nbuffers = cam->nbuffers;
- u32 i;
- int err = 0;
-
- if (copy_from_user(&format, arg, sizeof(format)))
- return -EFAULT;
-
- pix = &(format.fmt.pix);
-
- if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- memcpy(&rect, &(s->_rect), sizeof(rect));
-
- { /* calculate the actual scaling factor */
- u32 a, b;
- a = rect.width * rect.height;
- b = pix->width * pix->height;
- scale = b ? (u8)((a / b) < 4 ? 1 :
- ((a / b) < 16 ? 2 : 4)) : 1;
- }
-
- rect.width = scale * pix->width;
- rect.height = scale * pix->height;
-
- if (rect.width < 16)
- rect.width = 16;
- if (rect.height < 16)
- rect.height = 16;
- if (rect.width > bounds->left + bounds->width - rect.left)
- rect.width = bounds->left + bounds->width - rect.left;
- if (rect.height > bounds->top + bounds->height - rect.top)
- rect.height = bounds->top + bounds->height - rect.top;
-
- rect.width &= ~15L;
- rect.height &= ~15L;
-
- { /* adjust the scaling factor */
- u32 a, b;
- a = rect.width * rect.height;
- b = pix->width * pix->height;
- scale = b ? (u8)((a / b) < 4 ? 1 :
- ((a / b) < 16 ? 2 : 4)) : 1;
- }
-
- pix->width = rect.width / scale;
- pix->height = rect.height / scale;
-
- if (pix->pixelformat != V4L2_PIX_FMT_SN9C10X &&
- pix->pixelformat != V4L2_PIX_FMT_SBGGR8)
- pix->pixelformat = pfmt->pixelformat;
- pix->priv = pfmt->priv; /* bpp */
- pix->colorspace = pfmt->colorspace;
- pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
- ? 0 : (pix->width * pix->priv) / 8;
- pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
- pix->field = V4L2_FIELD_NONE;
-
- if (cmd == VIDIOC_TRY_FMT) {
- if (copy_to_user(arg, &format, sizeof(format)))
- return -EFAULT;
- return 0;
- }
-
- if (cam->module_param.force_munmap)
- for (i = 0; i < cam->nbuffers; i++)
- if (cam->frame[i].vma_use_count) {
- DBG(3, "VIDIOC_S_FMT failed. "
- "Unmap the buffers first.")
- return -EINVAL;
- }
-
- if (cam->stream == STREAM_ON)
- if ((err = sn9c102_stream_interrupt(cam)))
- return err;
-
- if (copy_to_user(arg, &format, sizeof(format))) {
- cam->stream = stream;
- return -EFAULT;
- }
-
- if (cam->module_param.force_munmap || cam->io == IO_READ)
- sn9c102_release_buffers(cam);
-
- err += sn9c102_set_pix_format(cam, pix);
- err += sn9c102_set_crop(cam, &rect);
- if (s->set_pix_format)
- err += s->set_pix_format(cam, pix);
- if (s->set_crop)
- err += s->set_crop(cam, &rect);
- err += sn9c102_set_scale(cam, scale);
-
- if (err) { /* atomic, no rollback in ioctl() */
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_FMT failed because of hardware "
- "problems. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->minor)
- return -EIO;
- }
-
- memcpy(pfmt, pix, sizeof(*pix));
- memcpy(&(s->_rect), &rect, sizeof(rect));
-
- if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
- nbuffers != sn9c102_request_buffers(cam, nbuffers,
- cam->io)) {
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_FMT failed because of not enough "
- "memory. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->minor)
- return -ENOMEM;
- }
-
- cam->stream = stream;
-
- return 0;
- }
+ return sn9c102_vidioc_try_s_fmt(cam, cmd, arg);
case VIDIOC_G_JPEGCOMP:
- {
- if (copy_to_user(arg, &cam->compression,
- sizeof(cam->compression)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_g_jpegcomp(cam, arg);
case VIDIOC_S_JPEGCOMP:
- {
- struct v4l2_jpegcompression jc;
- const enum sn9c102_stream_state stream = cam->stream;
- int err = 0;
-
- if (copy_from_user(&jc, arg, sizeof(jc)))
- return -EFAULT;
-
- if (jc.quality != 0 && jc.quality != 1)
- return -EINVAL;
-
- if (cam->stream == STREAM_ON)
- if ((err = sn9c102_stream_interrupt(cam)))
- return err;
-
- err += sn9c102_set_compression(cam, &jc);
- if (err) { /* atomic, no rollback in ioctl() */
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
- "problems. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->minor)
- return -EIO;
- }
-
- cam->compression.quality = jc.quality;
-
- cam->stream = stream;
-
- return 0;
- }
+ return sn9c102_vidioc_s_jpegcomp(cam, arg);
case VIDIOC_REQBUFS:
- {
- struct v4l2_requestbuffers rb;
- u32 i;
- int err;
-
- if (copy_from_user(&rb, arg, sizeof(rb)))
- return -EFAULT;
-
- if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
- rb.memory != V4L2_MEMORY_MMAP)
- return -EINVAL;
-
- if (cam->io == IO_READ) {
- DBG(3, "Close and open the device again to choose "
- "the mmap I/O method")
- return -EINVAL;
- }
-
- for (i = 0; i < cam->nbuffers; i++)
- if (cam->frame[i].vma_use_count) {
- DBG(3, "VIDIOC_REQBUFS failed. "
- "Previous buffers are still mapped.")
- return -EINVAL;
- }
-
- if (cam->stream == STREAM_ON)
- if ((err = sn9c102_stream_interrupt(cam)))
- return err;
-
- sn9c102_empty_framequeues(cam);
-
- sn9c102_release_buffers(cam);
- if (rb.count)
- rb.count = sn9c102_request_buffers(cam, rb.count,
- IO_MMAP);
-
- if (copy_to_user(arg, &rb, sizeof(rb))) {
- sn9c102_release_buffers(cam);
- cam->io = IO_NONE;
- return -EFAULT;
- }
-
- cam->io = rb.count ? IO_MMAP : IO_NONE;
-
- return 0;
- }
+ return sn9c102_vidioc_reqbufs(cam, arg);
case VIDIOC_QUERYBUF:
- {
- struct v4l2_buffer b;
-
- if (copy_from_user(&b, arg, sizeof(b)))
- return -EFAULT;
-
- if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
- b.index >= cam->nbuffers || cam->io != IO_MMAP)
- return -EINVAL;
-
- memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
-
- if (cam->frame[b.index].vma_use_count)
- b.flags |= V4L2_BUF_FLAG_MAPPED;
-
- if (cam->frame[b.index].state == F_DONE)
- b.flags |= V4L2_BUF_FLAG_DONE;
- else if (cam->frame[b.index].state != F_UNUSED)
- b.flags |= V4L2_BUF_FLAG_QUEUED;
-
- if (copy_to_user(arg, &b, sizeof(b)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_querybuf(cam, arg);
case VIDIOC_QBUF:
- {
- struct v4l2_buffer b;
- unsigned long lock_flags;
-
- if (copy_from_user(&b, arg, sizeof(b)))
- return -EFAULT;
-
- if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
- b.index >= cam->nbuffers || cam->io != IO_MMAP)
- return -EINVAL;
-
- if (cam->frame[b.index].state != F_UNUSED)
- return -EINVAL;
-
- cam->frame[b.index].state = F_QUEUED;
-
- spin_lock_irqsave(&cam->queue_lock, lock_flags);
- list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
- spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
- PDBGG("Frame #%lu queued", (unsigned long)b.index)
-
- return 0;
- }
+ return sn9c102_vidioc_qbuf(cam, arg);
case VIDIOC_DQBUF:
- {
- struct v4l2_buffer b;
- struct sn9c102_frame_t *f;
- unsigned long lock_flags;
- int err = 0;
-
- if (copy_from_user(&b, arg, sizeof(b)))
- return -EFAULT;
-
- if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP)
- return -EINVAL;
-
- if (list_empty(&cam->outqueue)) {
- if (cam->stream == STREAM_OFF)
- return -EINVAL;
- if (filp->f_flags & O_NONBLOCK)
- return -EAGAIN;
- err = wait_event_interruptible
- ( cam->wait_frame,
- (!list_empty(&cam->outqueue)) ||
- (cam->state & DEV_DISCONNECTED) ||
- (cam->state & DEV_MISCONFIGURED) );
- if (err)
- return err;
- if (cam->state & DEV_DISCONNECTED)
- return -ENODEV;
- if (cam->state & DEV_MISCONFIGURED)
- return -EIO;
- }
-
- spin_lock_irqsave(&cam->queue_lock, lock_flags);
- f = list_entry(cam->outqueue.next, struct sn9c102_frame_t,
- frame);
- list_del(cam->outqueue.next);
- spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
- f->state = F_UNUSED;
-
- memcpy(&b, &f->buf, sizeof(b));
- if (f->vma_use_count)
- b.flags |= V4L2_BUF_FLAG_MAPPED;
-
- if (copy_to_user(arg, &b, sizeof(b)))
- return -EFAULT;
-
- PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index)
-
- return 0;
- }
+ return sn9c102_vidioc_dqbuf(cam, filp, arg);
case VIDIOC_STREAMON:
- {
- int type;
-
- if (copy_from_user(&type, arg, sizeof(type)))
- return -EFAULT;
-
- if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
- return -EINVAL;
-
- if (list_empty(&cam->inqueue))
- return -EINVAL;
-
- cam->stream = STREAM_ON;
-
- DBG(3, "Stream on")
-
- return 0;
- }
+ return sn9c102_vidioc_streamon(cam, arg);
case VIDIOC_STREAMOFF:
- {
- int type, err;
-
- if (copy_from_user(&type, arg, sizeof(type)))
- return -EFAULT;
-
- if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
- return -EINVAL;
-
- if (cam->stream == STREAM_ON)
- if ((err = sn9c102_stream_interrupt(cam)))
- return err;
-
- sn9c102_empty_framequeues(cam);
-
- DBG(3, "Stream off")
-
- return 0;
- }
+ return sn9c102_vidioc_streamoff(cam, arg);
case VIDIOC_G_PARM:
- {
- struct v4l2_streamparm sp;
-
- if (copy_from_user(&sp, arg, sizeof(sp)))
- return -EFAULT;
-
- if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- sp.parm.capture.extendedmode = 0;
- sp.parm.capture.readbuffers = cam->nreadbuffers;
-
- if (copy_to_user(arg, &sp, sizeof(sp)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_g_parm(cam, arg);
case VIDIOC_S_PARM_OLD:
case VIDIOC_S_PARM:
- {
- struct v4l2_streamparm sp;
-
- if (copy_from_user(&sp, arg, sizeof(sp)))
- return -EFAULT;
-
- if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- sp.parm.capture.extendedmode = 0;
-
- if (sp.parm.capture.readbuffers == 0)
- sp.parm.capture.readbuffers = cam->nreadbuffers;
-
- if (sp.parm.capture.readbuffers > SN9C102_MAX_FRAMES)
- sp.parm.capture.readbuffers = SN9C102_MAX_FRAMES;
-
- if (copy_to_user(arg, &sp, sizeof(sp)))
- return -EFAULT;
-
- cam->nreadbuffers = sp.parm.capture.readbuffers;
-
- return 0;
- }
+ return sn9c102_vidioc_s_parm(cam, arg);
case VIDIOC_G_STD:
case VIDIOC_S_STD:
@@ -2499,17 +2659,20 @@
return -ERESTARTSYS;
if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present")
+ DBG(1, "Device not present");
up(&cam->fileop_sem);
return -ENODEV;
}
if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it again.")
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
up(&cam->fileop_sem);
return -EIO;
}
+ V4LDBG(3, "sn9c102", cmd);
+
err = sn9c102_ioctl_v4l2(inode, filp, cmd, (void __user *)arg);
up(&cam->fileop_sem);
@@ -2517,9 +2680,10 @@
return err;
}
+/*****************************************************************************/
static struct file_operations sn9c102_fops = {
- .owner = THIS_MODULE,
+ .owner = THIS_MODULE,
.open = sn9c102_open,
.release = sn9c102_release,
.ioctl = sn9c102_ioctl,
@@ -2538,36 +2702,22 @@
struct usb_device *udev = interface_to_usbdev(intf);
struct sn9c102_device* cam;
static unsigned int dev_nr = 0;
- unsigned int i, n;
+ unsigned int i;
int err = 0, r;
- n = ARRAY_SIZE(sn9c102_id_table);
- for (i = 0; i < n-1; i++)
- if (le16_to_cpu(udev->descriptor.idVendor) ==
- sn9c102_id_table[i].idVendor &&
- le16_to_cpu(udev->descriptor.idProduct) ==
- sn9c102_id_table[i].idProduct)
- break;
- if (i == n-1)
- return -ENODEV;
-
- if (!(cam = kmalloc(sizeof(struct sn9c102_device), GFP_KERNEL)))
+ if (!(cam = kzalloc(sizeof(struct sn9c102_device), GFP_KERNEL)))
return -ENOMEM;
- memset(cam, 0, sizeof(*cam));
cam->usbdev = udev;
- memcpy(&cam->dev, &udev->dev, sizeof(struct device));
-
- if (!(cam->control_buffer = kmalloc(8, GFP_KERNEL))) {
- DBG(1, "kmalloc() failed")
+ if (!(cam->control_buffer = kzalloc(8, GFP_KERNEL))) {
+ DBG(1, "kmalloc() failed");
err = -ENOMEM;
goto fail;
}
- memset(cam->control_buffer, 0, 8);
if (!(cam->v4ldev = video_device_alloc())) {
- DBG(1, "video_device_alloc() failed")
+ DBG(1, "video_device_alloc() failed");
err = -ENOMEM;
goto fail;
}
@@ -2577,25 +2727,22 @@
r = sn9c102_read_reg(cam, 0x00);
if (r < 0 || r != 0x10) {
DBG(1, "Sorry, this is not a SN9C10x based camera "
- "(vid/pid 0x%04X/0x%04X)",
- sn9c102_id_table[i].idVendor,sn9c102_id_table[i].idProduct)
+ "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
err = -ENODEV;
goto fail;
}
- cam->bridge = (sn9c102_id_table[i].idProduct & 0xffc0) == 0x6080 ?
+ cam->bridge = (id->idProduct & 0xffc0) == 0x6080 ?
BRIDGE_SN9C103 : BRIDGE_SN9C102;
switch (cam->bridge) {
case BRIDGE_SN9C101:
case BRIDGE_SN9C102:
DBG(2, "SN9C10[12] PC Camera Controller detected "
- "(vid/pid 0x%04X/0x%04X)", sn9c102_id_table[i].idVendor,
- sn9c102_id_table[i].idProduct)
+ "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
break;
case BRIDGE_SN9C103:
DBG(2, "SN9C103 PC Camera Controller detected "
- "(vid/pid 0x%04X/0x%04X)", sn9c102_id_table[i].idVendor,
- sn9c102_id_table[i].idProduct)
+ "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
break;
}
@@ -2606,24 +2753,24 @@
}
if (!err && cam->sensor) {
- DBG(2, "%s image sensor detected", cam->sensor->name)
+ DBG(2, "%s image sensor detected", cam->sensor->name);
DBG(3, "Support for %s maintained by %s",
- cam->sensor->name, cam->sensor->maintainer)
+ cam->sensor->name, cam->sensor->maintainer);
} else {
- DBG(1, "No supported image sensor detected")
+ DBG(1, "No supported image sensor detected");
err = -ENODEV;
goto fail;
}
if (sn9c102_init(cam)) {
- DBG(1, "Initialization failed. I will retry on open().")
+ DBG(1, "Initialization failed. I will retry on open().");
cam->state |= DEV_MISCONFIGURED;
}
strcpy(cam->v4ldev->name, "SN9C10x PC Camera");
cam->v4ldev->owner = THIS_MODULE;
cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
- cam->v4ldev->hardware = VID_HARDWARE_SN9C102;
+ cam->v4ldev->hardware = 0;
cam->v4ldev->fops = &sn9c102_fops;
cam->v4ldev->minor = video_nr[dev_nr];
cam->v4ldev->release = video_device_release;
@@ -2634,23 +2781,25 @@
err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
video_nr[dev_nr]);
if (err) {
- DBG(1, "V4L2 device registration failed")
+ DBG(1, "V4L2 device registration failed");
if (err == -ENFILE && video_nr[dev_nr] == -1)
- DBG(1, "Free /dev/videoX node not found")
+ DBG(1, "Free /dev/videoX node not found");
video_nr[dev_nr] = -1;
dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0;
up(&cam->dev_sem);
goto fail;
}
- DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor)
+ DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
cam->module_param.force_munmap = force_munmap[dev_nr];
dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0;
+#ifdef CONFIG_VIDEO_ADV_DEBUG
sn9c102_create_sysfs(cam);
- DBG(2, "Optional device control through 'sysfs' interface ready")
+ DBG(2, "Optional device control through 'sysfs' interface ready");
+#endif
usb_set_intfdata(intf, cam);
@@ -2680,14 +2829,14 @@
down(&cam->dev_sem);
- DBG(2, "Disconnecting %s...", cam->v4ldev->name)
+ DBG(2, "Disconnecting %s...", cam->v4ldev->name);
wake_up_interruptible_all(&cam->open);
if (cam->users) {
DBG(2, "Device /dev/video%d is open! Deregistration and "
"memory deallocation are deferred on close.",
- cam->v4ldev->minor)
+ cam->v4ldev->minor);
cam->state |= DEV_MISCONFIGURED;
sn9c102_stop_transfer(cam);
cam->state |= DEV_DISCONNECTED;
@@ -2720,11 +2869,11 @@
{
int err = 0;
- KDBG(2, SN9C102_MODULE_NAME " v" SN9C102_MODULE_VERSION)
- KDBG(3, SN9C102_MODULE_AUTHOR)
+ KDBG(2, SN9C102_MODULE_NAME " v" SN9C102_MODULE_VERSION);
+ KDBG(3, SN9C102_MODULE_AUTHOR);
if ((err = usb_register(&sn9c102_usb_driver)))
- KDBG(1, "usb_register() failed")
+ KDBG(1, "usb_register() failed");
return err;
}
diff --git a/drivers/usb/media/sn9c102_hv7131d.c b/drivers/usb/media/sn9c102_hv7131d.c
index 18070d5..46c12ec 100644
--- a/drivers/usb/media/sn9c102_hv7131d.c
+++ b/drivers/usb/media/sn9c102_hv7131d.c
@@ -2,7 +2,7 @@
* Plug-in for HV7131D image sensor connected to the SN9C10x PC Camera *
* Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
diff --git a/drivers/usb/media/sn9c102_mi0343.c b/drivers/usb/media/sn9c102_mi0343.c
index 86676ab..d9aa7a6 100644
--- a/drivers/usb/media/sn9c102_mi0343.c
+++ b/drivers/usb/media/sn9c102_mi0343.c
@@ -2,7 +2,7 @@
* Plug-in for MI-0343 image sensor connected to the SN9C10x PC Camera *
* Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
diff --git a/drivers/usb/media/sn9c102_ov7630.c b/drivers/usb/media/sn9c102_ov7630.c
index d27c5ae..4a36519 100644
--- a/drivers/usb/media/sn9c102_ov7630.c
+++ b/drivers/usb/media/sn9c102_ov7630.c
@@ -2,7 +2,7 @@
* Plug-in for OV7630 image sensor connected to the SN9C10x PC Camera *
* Controllers *
* *
- * Copyright (C) 2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2005-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
@@ -375,8 +375,10 @@
sn9c102_attach_sensor(cam, &ov7630);
- if (le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x608f &&
- le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602c)
+ if (le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602c &&
+ le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602d &&
+ le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x608f &&
+ le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x60b0)
return -ENODEV;
err += sn9c102_write_reg(cam, 0x01, 0x01);
diff --git a/drivers/usb/media/sn9c102_pas106b.c b/drivers/usb/media/sn9c102_pas106b.c
index 48e3ec3..b1dee78 100644
--- a/drivers/usb/media/sn9c102_pas106b.c
+++ b/drivers/usb/media/sn9c102_pas106b.c
@@ -2,7 +2,7 @@
* Plug-in for PAS106B image sensor connected to the SN9C10x PC Camera *
* Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
diff --git a/drivers/usb/media/sn9c102_sensor.h b/drivers/usb/media/sn9c102_sensor.h
index a45166c..7d953b2 100644
--- a/drivers/usb/media/sn9c102_sensor.h
+++ b/drivers/usb/media/sn9c102_sensor.h
@@ -1,7 +1,7 @@
/***************************************************************************
* API for image sensors connected to the SN9C10x PC Camera Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
@@ -92,7 +92,18 @@
sn9c102_attach_sensor(struct sn9c102_device* cam,
struct sn9c102_sensor* sensor);
-/* Each SN9C10X camera has proper PID/VID identifiers. Add them here in case.*/
+/*
+ Each SN9C10x camera has proper PID/VID identifiers.
+ SN9C103 supports multiple interfaces, but we only handle the video class
+ interface.
+*/
+#define SN9C102_USB_DEVICE(vend, prod, intclass) \
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+ USB_DEVICE_ID_MATCH_INT_CLASS, \
+ .idVendor = (vend), \
+ .idProduct = (prod), \
+ .bInterfaceClass = (intclass)
+
#define SN9C102_ID_TABLE \
static const struct usb_device_id sn9c102_id_table[] = { \
{ USB_DEVICE(0x0c45, 0x6001), }, /* TAS5110C1B */ \
@@ -107,33 +118,34 @@
{ USB_DEVICE(0x0c45, 0x602b), }, /* MI-0343 */ \
{ USB_DEVICE(0x0c45, 0x602c), }, /* OV7630 */ \
{ USB_DEVICE(0x0c45, 0x602d), }, \
+ { USB_DEVICE(0x0c45, 0x602e), }, /* OV7630 */ \
{ USB_DEVICE(0x0c45, 0x6030), }, /* MI03x */ \
- { USB_DEVICE(0x0c45, 0x6080), }, \
- { USB_DEVICE(0x0c45, 0x6082), }, /* MI0343 and MI0360 */ \
- { USB_DEVICE(0x0c45, 0x6083), }, /* HV7131[D|E1] */ \
- { USB_DEVICE(0x0c45, 0x6088), }, \
- { USB_DEVICE(0x0c45, 0x608a), }, \
- { USB_DEVICE(0x0c45, 0x608b), }, \
- { USB_DEVICE(0x0c45, 0x608c), }, /* HV7131x */ \
- { USB_DEVICE(0x0c45, 0x608e), }, /* CIS-VF10 */ \
- { USB_DEVICE(0x0c45, 0x608f), }, /* OV7630 */ \
- { USB_DEVICE(0x0c45, 0x60a0), }, \
- { USB_DEVICE(0x0c45, 0x60a2), }, \
- { USB_DEVICE(0x0c45, 0x60a3), }, \
- { USB_DEVICE(0x0c45, 0x60a8), }, /* PAS106B */ \
- { USB_DEVICE(0x0c45, 0x60aa), }, /* TAS5130D1B */ \
- { USB_DEVICE(0x0c45, 0x60ab), }, /* TAS5110C1B */ \
- { USB_DEVICE(0x0c45, 0x60ac), }, \
- { USB_DEVICE(0x0c45, 0x60ae), }, \
- { USB_DEVICE(0x0c45, 0x60af), }, /* PAS202BCB */ \
- { USB_DEVICE(0x0c45, 0x60b0), }, \
- { USB_DEVICE(0x0c45, 0x60b2), }, \
- { USB_DEVICE(0x0c45, 0x60b3), }, \
- { USB_DEVICE(0x0c45, 0x60b8), }, \
- { USB_DEVICE(0x0c45, 0x60ba), }, \
- { USB_DEVICE(0x0c45, 0x60bb), }, \
- { USB_DEVICE(0x0c45, 0x60bc), }, \
- { USB_DEVICE(0x0c45, 0x60be), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x6080, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x6082, 0xff), }, /* MI0343 & MI0360 */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x6083, 0xff), }, /* HV7131[D|E1] */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x6088, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x608a, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x608b, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x608c, 0xff), }, /* HV7131x */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x608e, 0xff), }, /* CIS-VF10 */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x608f, 0xff), }, /* OV7630 */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60a0, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60a2, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60a3, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60a8, 0xff), }, /* PAS106B */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60aa, 0xff), }, /* TAS5130D1B */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60ab, 0xff), }, /* TAS5110C1B */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60ac, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60ae, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60af, 0xff), }, /* PAS202BCB */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60b0, 0xff), }, /* OV7630 (?) */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60b2, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60b3, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60b8, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60ba, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60bb, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60bc, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60be, 0xff), }, \
{ } \
};
@@ -177,16 +189,18 @@
extern int sn9c102_i2c_read(struct sn9c102_device*, u8 address);
/* I/O on registers in the bridge. Could be used by the sensor methods too */
+extern int sn9c102_write_regs(struct sn9c102_device*, u8* buff, u16 index);
extern int sn9c102_write_reg(struct sn9c102_device*, u8 value, u16 index);
extern int sn9c102_pread_reg(struct sn9c102_device*, u16 index);
/*
NOTE: there are no exported debugging functions. To uniform the output you
must use the dev_info()/dev_warn()/dev_err() macros defined in device.h,
- already included here, the argument being the struct device 'dev' of the
- sensor structure. Do NOT use these macros before the sensor is attached or
- the kernel will crash! However, you should not need to notify the user about
- common errors or other messages, since this is done by the master module.
+ already included here, the argument being the struct device '&usbdev->dev'
+ of the sensor structure. Do NOT use these macros before the sensor is
+ attached or the kernel will crash! However, you should not need to notify
+ the user about common errors or other messages, since this is done by the
+ master module.
*/
/*****************************************************************************/
@@ -345,13 +359,6 @@
error code without rolling back.
*/
- const struct device* dev;
- /*
- This is the argument for dev_err(), dev_info() and dev_warn(). It
- is used for debugging purposes. You must not access the struct
- before the sensor is attached.
- */
-
const struct usb_device* usbdev;
/*
Points to the usb_device struct after the sensor is attached.
diff --git a/drivers/usb/media/sn9c102_tas5110c1b.c b/drivers/usb/media/sn9c102_tas5110c1b.c
index 8775999..32ddf23 100644
--- a/drivers/usb/media/sn9c102_tas5110c1b.c
+++ b/drivers/usb/media/sn9c102_tas5110c1b.c
@@ -2,7 +2,7 @@
* Plug-in for TAS5110C1B image sensor connected to the SN9C10x PC Camera *
* Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
diff --git a/drivers/usb/media/sn9c102_tas5130d1b.c b/drivers/usb/media/sn9c102_tas5130d1b.c
index 927eafd..a0728f0 100644
--- a/drivers/usb/media/sn9c102_tas5130d1b.c
+++ b/drivers/usb/media/sn9c102_tas5130d1b.c
@@ -2,7 +2,7 @@
* Plug-in for TAS5130D1B image sensor connected to the SN9C10x PC Camera *
* Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
diff --git a/drivers/usb/media/w9968cf.c b/drivers/usb/media/w9968cf.c
index bff9434..9937fc6 100644
--- a/drivers/usb/media/w9968cf.c
+++ b/drivers/usb/media/w9968cf.c
@@ -62,7 +62,6 @@
MODULE_SUPPORTED_DEVICE("Video");
static int ovmod_load = W9968CF_OVMOD_LOAD;
-static int vppmod_load = W9968CF_VPPMOD_LOAD;
static unsigned short simcams = W9968CF_SIMCAMS;
static short video_nr[]={[0 ... W9968CF_MAX_DEVICES-1] = -1}; /*-1=first free*/
static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] =
@@ -107,7 +106,6 @@
#ifdef CONFIG_KMOD
module_param(ovmod_load, bool, 0644);
-module_param(vppmod_load, bool, 0444);
#endif
module_param(simcams, ushort, 0644);
module_param_array(video_nr, short, ¶m_nv[0], 0444);
@@ -150,18 +148,6 @@
"\ninto memory."
"\nDefault value is "__MODULE_STRING(W9968CF_OVMOD_LOAD)"."
"\n");
-MODULE_PARM_DESC(vppmod_load,
- "\n<0|1> Automatic 'w9968cf-vpp' module loading."
- "\n0 disabled, 1 enabled."
- "\nIf enabled, every time an application attempts to open a"
- "\ncamera, 'insmod' searches for the video post-processing"
- "\nmodule in the system and loads it automatically (if"
- "\npresent). The optional 'w9968cf-vpp' module adds extra"
- "\n image manipulation functions to the 'w9968cf' module,like"
- "\nsoftware up-scaling,colour conversions and video decoding"
- "\nfor very high frame rates."
- "\nDefault value is "__MODULE_STRING(W9968CF_VPPMOD_LOAD)"."
- "\n");
#endif
MODULE_PARM_DESC(simcams,
"\n<n> Number of cameras allowed to stream simultaneously."
@@ -492,10 +478,6 @@
static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**);
static void w9968cf_release_resources(struct w9968cf_device*);
-/* Intermodule communication */
-static int w9968cf_vppmod_detect(struct w9968cf_device*);
-static void w9968cf_vppmod_release(struct w9968cf_device*);
-
/****************************************************************************
@@ -2737,9 +2719,7 @@
cam->streaming = 0;
cam->misconfigured = 0;
- if (!w9968cf_vpp)
- if ((err = w9968cf_vppmod_detect(cam)))
- goto out;
+ w9968cf_adjust_configuration(cam);
if ((err = w9968cf_allocate_memory(cam)))
goto deallocate_memory;
@@ -2766,7 +2746,6 @@
deallocate_memory:
w9968cf_deallocate_memory(cam);
-out:
DBG(2, "Failed to open the video device")
up(&cam->dev_sem);
up_read(&w9968cf_disconnect);
@@ -2784,8 +2763,6 @@
w9968cf_stop_transfer(cam);
- w9968cf_vppmod_release(cam);
-
if (cam->disconnected) {
w9968cf_release_resources(cam);
up(&cam->dev_sem);
@@ -3681,106 +3658,6 @@
* Module init, exit and intermodule communication *
****************************************************************************/
-static int w9968cf_vppmod_detect(struct w9968cf_device* cam)
-{
- if (!w9968cf_vpp)
- if (vppmod_load)
- request_module("w9968cf-vpp");
-
- down(&w9968cf_vppmod_lock);
-
- if (!w9968cf_vpp) {
- DBG(4, "Video post-processing module not detected")
- w9968cf_adjust_configuration(cam);
- goto out;
- }
-
- if (!try_module_get(w9968cf_vpp->owner)) {
- DBG(1, "Couldn't increment the reference count of "
- "the video post-processing module")
- up(&w9968cf_vppmod_lock);
- return -ENOSYS;
- }
-
- w9968cf_vpp->busy++;
-
- DBG(5, "Video post-processing module detected")
-
-out:
- up(&w9968cf_vppmod_lock);
- return 0;
-}
-
-
-static void w9968cf_vppmod_release(struct w9968cf_device* cam)
-{
- down(&w9968cf_vppmod_lock);
-
- if (w9968cf_vpp && w9968cf_vpp->busy) {
- module_put(w9968cf_vpp->owner);
- w9968cf_vpp->busy--;
- wake_up(&w9968cf_vppmod_wait);
- DBG(5, "Video post-processing module released")
- }
-
- up(&w9968cf_vppmod_lock);
-}
-
-
-int w9968cf_vppmod_register(struct w9968cf_vpp_t* vpp)
-{
- down(&w9968cf_vppmod_lock);
-
- if (w9968cf_vpp) {
- KDBG(1, "Video post-processing module already registered")
- up(&w9968cf_vppmod_lock);
- return -EINVAL;
- }
-
- w9968cf_vpp = vpp;
- w9968cf_vpp->busy = 0;
-
- KDBG(2, "Video post-processing module registered")
- up(&w9968cf_vppmod_lock);
- return 0;
-}
-
-
-int w9968cf_vppmod_deregister(struct w9968cf_vpp_t* vpp)
-{
- down(&w9968cf_vppmod_lock);
-
- if (!w9968cf_vpp) {
- up(&w9968cf_vppmod_lock);
- return -EINVAL;
- }
-
- if (w9968cf_vpp != vpp) {
- KDBG(1, "Only the owner can unregister the video "
- "post-processing module")
- up(&w9968cf_vppmod_lock);
- return -EINVAL;
- }
-
- if (w9968cf_vpp->busy) {
- KDBG(2, "Video post-processing module busy. Wait for it to be "
- "released...")
- up(&w9968cf_vppmod_lock);
- wait_event(w9968cf_vppmod_wait, !w9968cf_vpp->busy);
- w9968cf_vpp = NULL;
- goto out;
- }
-
- w9968cf_vpp = NULL;
-
- up(&w9968cf_vppmod_lock);
-
-out:
- KDBG(2, "Video post-processing module unregistered")
- return 0;
-}
-
-
static int __init w9968cf_module_init(void)
{
int err;
@@ -3810,6 +3687,3 @@
module_init(w9968cf_module_init);
module_exit(w9968cf_module_exit);
-
-EXPORT_SYMBOL(w9968cf_vppmod_register);
-EXPORT_SYMBOL(w9968cf_vppmod_deregister);
diff --git a/drivers/usb/media/w9968cf.h b/drivers/usb/media/w9968cf.h
index 8acbfe2..47a6ff7 100644
--- a/drivers/usb/media/w9968cf.h
+++ b/drivers/usb/media/w9968cf.h
@@ -195,7 +195,6 @@
};
static struct w9968cf_vpp_t* w9968cf_vpp;
-static DECLARE_MUTEX(w9968cf_vppmod_lock);
static DECLARE_WAIT_QUEUE_HEAD(w9968cf_vppmod_wait);
static LIST_HEAD(w9968cf_dev_list); /* head of V4L registered cameras list */
diff --git a/drivers/usb/media/w9968cf_vpp.h b/drivers/usb/media/w9968cf_vpp.h
index 3f5317d..f3b91b7 100644
--- a/drivers/usb/media/w9968cf_vpp.h
+++ b/drivers/usb/media/w9968cf_vpp.h
@@ -37,7 +37,4 @@
u8 busy; /* read-only flag: module is/is not in use */
};
-extern int w9968cf_vppmod_register(struct w9968cf_vpp_t*);
-extern int w9968cf_vppmod_deregister(struct w9968cf_vpp_t*);
-
#endif /* _W9968CF_VPP_H_ */
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index 449b250..ad2f4cc 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -2093,6 +2093,8 @@
static struct usb_device_id auerswald_ids [] = {
{ USB_DEVICE (ID_AUERSWALD, 0x00C0) }, /* COMpact 2104 USB */
{ USB_DEVICE (ID_AUERSWALD, 0x00DB) }, /* COMpact 4410/2206 USB */
+ { USB_DEVICE (ID_AUERSWALD, 0x00DC) }, /* COMpact 4406 DSL */
+ { USB_DEVICE (ID_AUERSWALD, 0x00DD) }, /* COMpact 2204 USB */
{ USB_DEVICE (ID_AUERSWALD, 0x00F1) }, /* Comfort 2000 System Telephone */
{ USB_DEVICE (ID_AUERSWALD, 0x00F2) }, /* Comfort 1200 System Telephone */
{ } /* Terminating entry */
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 981d8a5..331d4ae 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -593,7 +593,7 @@
/*
* usb class driver info in order to get a minor number from the usb core,
- * and to have the device registered with devfs and the driver core
+ * and to have the device registered with the driver core
*/
static struct usb_class_driver ld_usb_class = {
.name = "ldusb%d",
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
index 5411816..3094970 100644
--- a/drivers/usb/net/asix.c
+++ b/drivers/usb/net/asix.c
@@ -916,6 +916,10 @@
// Linksys USB200M Rev 2
USB_DEVICE (0x13b1, 0x0018),
.driver_info = (unsigned long) &ax88772_info,
+}, {
+ // 0Q0 cable ethernet
+ USB_DEVICE (0x1557, 0x7720),
+ .driver_info = (unsigned long) &ax88772_info,
},
{ }, // END
};
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index da46b35..dc7a069 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -32,7 +32,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.05"
+#define DRIVER_VERSION "v0.06"
#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
/*
@@ -55,11 +55,15 @@
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
- { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
- { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
- { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
- { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
+ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
+ { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
+ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+ { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 10bc1bf..f2b4ca8 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -476,10 +476,16 @@
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) },
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
{ USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 00d45f8..ca40f16 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -31,9 +31,14 @@
#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
+
/* www.irtrans.de device */
#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
+
+/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
+#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
+
/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
/* they use the ftdi chipset for the USB interface and the vendor id is the same */
#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
@@ -51,6 +56,12 @@
#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
/*
+ * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device
+ * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen)
+ * (the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_PCDJ_DAC2_PID 0xFA88
+
+/*
* The following are the values for the Matrix Orbital LCD displays,
* which are the FT232BM ( similar to the 8U232AM )
*/
@@ -215,8 +226,10 @@
* Definitions for ATIK Instruments astronomical USB based cameras
* Check it at http://www.atik-instruments.com/
*/
-#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Camera */
-#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Camera */
+#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */
+#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */
+#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */
+#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */
/*
* Protego product ids
@@ -365,6 +378,12 @@
#define POSIFLEX_VID 0x0d3a /* Vendor ID */
#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
+/*
+ * Westrex International devices submitted by Cory Lee
+ */
+#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
+#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 0eb883f..e8e575e 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -73,7 +73,9 @@
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
- { USB_DEVICE( NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) },
+ { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) },
+ { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID ) },
+ { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 21d434d..1807087 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -64,3 +64,10 @@
/* Nokia CA-42 Cable */
#define NOKIA_CA42_VENDOR_ID 0x078b
#define NOKIA_CA42_PRODUCT_ID 0x1234
+
+/* CA-42 CLONE Cable www.ca-42.com chipset: Prolific Technology Inc */
+#define CA_42_CA42_VENDOR_ID 0x10b5
+#define CA_42_CA42_PRODUCT_ID 0xac70
+
+#define SAGEM_VENDOR_ID 0x079b
+#define SAGEM_PRODUCT_ID 0x0027
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 5b06f92..ab173b3 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -45,6 +45,12 @@
#include "debug.h"
#include "transport.h"
+#define RIO_MSC 0x08
+#define RIOP_INIT "RIOP\x00\x01\x08"
+#define RIOP_INIT_LEN 7
+#define RIO_SEND_LEN 40
+#define RIO_RECV_LEN 0x200
+
/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
* mode */
int usb_stor_euscsi_init(struct us_data *us)
@@ -91,3 +97,70 @@
return (res ? -1 : 0);
}
+
+/* Place the Rio Karma into mass storage mode.
+ *
+ * The initialization begins by sending 40 bytes starting
+ * RIOP\x00\x01\x08\x00, which the device will ack with a 512-byte
+ * packet with the high four bits set and everything else null.
+ *
+ * Next, we send RIOP\x80\x00\x08\x00. Each time, a 512 byte response
+ * must be read, but we must loop until byte 5 in the response is 0x08,
+ * indicating success. */
+int rio_karma_init(struct us_data *us)
+{
+ int result, partial;
+ char *recv;
+ unsigned long timeout;
+
+ // us->iobuf is big enough to hold cmd but not receive
+ if (!(recv = kmalloc(RIO_RECV_LEN, GFP_KERNEL)))
+ goto die_nomem;
+
+ US_DEBUGP("Initializing Karma...\n");
+
+ memset(us->iobuf, 0, RIO_SEND_LEN);
+ memcpy(us->iobuf, RIOP_INIT, RIOP_INIT_LEN);
+
+ result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ us->iobuf, RIO_SEND_LEN, &partial);
+ if (result != USB_STOR_XFER_GOOD)
+ goto die;
+
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ recv, RIO_RECV_LEN, &partial);
+ if (result != USB_STOR_XFER_GOOD)
+ goto die;
+
+ us->iobuf[4] = 0x80;
+ us->iobuf[5] = 0;
+ timeout = jiffies + msecs_to_jiffies(3000);
+ for (;;) {
+ US_DEBUGP("Sending init command\n");
+ result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ us->iobuf, RIO_SEND_LEN, &partial);
+ if (result != USB_STOR_XFER_GOOD)
+ goto die;
+
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ recv, RIO_RECV_LEN, &partial);
+ if (result != USB_STOR_XFER_GOOD)
+ goto die;
+
+ if (recv[5] == RIO_MSC)
+ break;
+ if (time_after(jiffies, timeout))
+ goto die;
+ msleep(10);
+ }
+ US_DEBUGP("Karma initialized.\n");
+ kfree(recv);
+ return 0;
+
+die:
+ kfree(recv);
+die_nomem:
+ US_DEBUGP("Could not initialize karma.\n");
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 4c1b2bd..f9907a5 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -48,3 +48,4 @@
/* This function is required to activate all four slots on the UCR-61S2B
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
+int rio_karma_init(struct us_data *us);
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index b28151d..b1ec4a7 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -116,7 +116,7 @@
static int usu_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- int type;
+ unsigned long type;
int rc;
unsigned long flags;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index dc301e5..ee958f9 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -145,6 +145,11 @@
US_SC_DEVICE, US_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
+UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101,
+ "Rio",
+ "Rio Karma",
+ US_SC_SCSI, US_PR_BULK, rio_karma_init, 0),
+
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
"Kyocera",
@@ -424,11 +429,11 @@
US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
/* This entry is needed because the device reports Sub=ff */
-UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0500,
- "Sony",
- "DSC-T1",
- US_SC_8070, US_PR_DEVICE, NULL,
- US_FL_SINGLE_LUN ),
+UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0600,
+ "Sony",
+ "DSC-T1/T5",
+ US_SC_8070, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
/* Reported by wim@geeks.nl */
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 5d02f16..4de9fb5 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -234,7 +234,7 @@
/*
* usb class driver info in order to get a minor number from the usb core,
- * and to have the device registered with devfs and the driver core
+ * and to have the device registered with the driver core
*/
static struct usb_class_driver skel_class = {
.name = "skel%d",
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index b218717..6761b68 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -116,9 +116,10 @@
int ret = 0;
memset(&var->transp, 0, sizeof(var->transp));
- memset(&var->red, 0, sizeof(var->red));
- memset(&var->green, 0, sizeof(var->green));
- memset(&var->blue, 0, sizeof(var->blue));
+
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
switch (var->bits_per_pixel) {
case 1:
@@ -133,34 +134,20 @@
var->blue.offset = 0;
break;
case 16:
- var->red.length = 5;
- var->green.length = 6;
- var->blue.length = 5;
- if (fb->panel->cntl & CNTL_BGR) {
- var->red.offset = 11;
- var->green.offset = 5;
- var->blue.offset = 0;
- } else {
- var->red.offset = 0;
- var->green.offset = 5;
- var->blue.offset = 11;
- }
+ var->red.length = 5;
+ var->blue.length = 5;
+ /*
+ * Green length can be 5 or 6 depending whether
+ * we're operating in RGB555 or RGB565 mode.
+ */
+ if (var->green.length != 5 && var->green.length != 6)
+ var->green.length = 6;
break;
case 32:
if (fb->panel->cntl & CNTL_LCDTFT) {
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
-
- if (fb->panel->cntl & CNTL_BGR) {
- var->red.offset = 16;
- var->green.offset = 8;
- var->blue.offset = 0;
- } else {
- var->red.offset = 0;
- var->green.offset = 8;
- var->blue.offset = 16;
- }
break;
}
default:
@@ -168,6 +155,23 @@
break;
}
+ /*
+ * >= 16bpp displays have separate colour component bitfields
+ * encoded in the pixel data. Calculate their position from
+ * the bitfield length defined above.
+ */
+ if (ret == 0 && var->bits_per_pixel >= 16) {
+ if (fb->panel->cntl & CNTL_BGR) {
+ var->blue.offset = 0;
+ var->green.offset = var->blue.offset + var->blue.length;
+ var->red.offset = var->green.offset + var->green.length;
+ } else {
+ var->red.offset = 0;
+ var->green.offset = var->red.offset + var->red.length;
+ var->blue.offset = var->green.offset + var->green.length;
+ }
+ }
+
return ret;
}
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 996d543..9d996f2 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -50,3 +50,11 @@
If you have a Sharp Zaurus SL-C7xx, say y to enable the
backlight driver.
+config BACKLIGHT_HP680
+ tristate "HP Jornada 680 Backlight Driver"
+ depends on BACKLIGHT_DEVICE && SH_HP6XX
+ default y
+ help
+ If you have a HP Jornada 680, say y to enable the
+ backlight driver.
+
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 4af321f..744210c 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -3,4 +3,5 @@
obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
+obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
obj-$(CONFIG_SHARP_LOCOMO) += locomolcd.o
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index 9d5015e..bd39bbd 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -13,7 +13,6 @@
#include <linux/ctype.h>
#include <linux/err.h>
#include <linux/fb.h>
-#include <asm/bug.h>
static ssize_t backlight_show_power(struct class_device *cdev, char *buf)
{
diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c
new file mode 100644
index 0000000..95da4c9
--- /dev/null
+++ b/drivers/video/backlight/hp680_bl.c
@@ -0,0 +1,189 @@
+/*
+ * Backlight Driver for HP Jornada 680
+ *
+ * Copyright (c) 2005 Andriy Skulysh
+ *
+ * Based on Sharp's Corgi Backlight Driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+
+#include <asm/cpu/dac.h>
+#include <asm/hp6xx/hp6xx.h>
+#include <asm/hd64461/hd64461.h>
+
+#define HP680_MAX_INTENSITY 255
+#define HP680_DEFAULT_INTENSITY 10
+
+static int hp680bl_powermode = FB_BLANK_UNBLANK;
+static int current_intensity = 0;
+static spinlock_t bl_lock = SPIN_LOCK_UNLOCKED;
+
+static void hp680bl_send_intensity(int intensity)
+{
+ unsigned long flags;
+
+ if (hp680bl_powermode != FB_BLANK_UNBLANK)
+ intensity = 0;
+
+ spin_lock_irqsave(&bl_lock, flags);
+ sh_dac_output(255-(u8)intensity, DAC_LCD_BRIGHTNESS);
+ spin_unlock_irqrestore(&bl_lock, flags);
+}
+
+static void hp680bl_blank(int blank)
+{
+ u16 v;
+
+ switch(blank) {
+
+ case FB_BLANK_NORMAL:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_POWERDOWN:
+ if (hp680bl_powermode == FB_BLANK_UNBLANK) {
+ hp680bl_send_intensity(0);
+ hp680bl_powermode = blank;
+ sh_dac_disable(DAC_LCD_BRIGHTNESS);
+ v = inw(HD64461_GPBDR);
+ v |= HD64461_GPBDR_LCDOFF;
+ outw(v, HD64461_GPBDR);
+ }
+ break;
+ case FB_BLANK_UNBLANK:
+ if (hp680bl_powermode != FB_BLANK_UNBLANK) {
+ sh_dac_enable(DAC_LCD_BRIGHTNESS);
+ v = inw(HD64461_GPBDR);
+ v &= ~HD64461_GPBDR_LCDOFF;
+ outw(v, HD64461_GPBDR);
+ hp680bl_powermode = blank;
+ hp680bl_send_intensity(current_intensity);
+ }
+ break;
+ }
+}
+
+#ifdef CONFIG_PM
+static int hp680bl_suspend(struct device *dev, pm_message_t state, u32 level)
+{
+ if (level == SUSPEND_POWER_DOWN)
+ hp680bl_blank(FB_BLANK_POWERDOWN);
+ return 0;
+}
+
+static int hp680bl_resume(struct device *dev, u32 level)
+{
+ if (level == RESUME_POWER_ON)
+ hp680bl_blank(FB_BLANK_UNBLANK);
+ return 0;
+}
+#else
+#define hp680bl_suspend NULL
+#define hp680bl_resume NULL
+#endif
+
+
+static int hp680bl_set_power(struct backlight_device *bd, int state)
+{
+ hp680bl_blank(state);
+ return 0;
+}
+
+static int hp680bl_get_power(struct backlight_device *bd)
+{
+ return hp680bl_powermode;
+}
+
+static int hp680bl_set_intensity(struct backlight_device *bd, int intensity)
+{
+ if (intensity > HP680_MAX_INTENSITY)
+ intensity = HP680_MAX_INTENSITY;
+ hp680bl_send_intensity(intensity);
+ current_intensity = intensity;
+ return 0;
+}
+
+static int hp680bl_get_intensity(struct backlight_device *bd)
+{
+ return current_intensity;
+}
+
+static struct backlight_properties hp680bl_data = {
+ .owner = THIS_MODULE,
+ .get_power = hp680bl_get_power,
+ .set_power = hp680bl_set_power,
+ .max_brightness = HP680_MAX_INTENSITY,
+ .get_brightness = hp680bl_get_intensity,
+ .set_brightness = hp680bl_set_intensity,
+};
+
+static struct backlight_device *hp680_backlight_device;
+
+static int __init hp680bl_probe(struct device *dev)
+{
+ hp680_backlight_device = backlight_device_register ("hp680-bl",
+ NULL, &hp680bl_data);
+ if (IS_ERR (hp680_backlight_device))
+ return PTR_ERR (hp680_backlight_device);
+
+ hp680bl_set_intensity(NULL, HP680_DEFAULT_INTENSITY);
+
+ return 0;
+}
+
+static int hp680bl_remove(struct device *dev)
+{
+ backlight_device_unregister(hp680_backlight_device);
+
+ return 0;
+}
+
+static struct device_driver hp680bl_driver = {
+ .name = "hp680-bl",
+ .bus = &platform_bus_type,
+ .probe = hp680bl_probe,
+ .remove = hp680bl_remove,
+ .suspend = hp680bl_suspend,
+ .resume = hp680bl_resume,
+};
+
+static struct platform_device hp680bl_device = {
+ .name = "hp680-bl",
+ .id = -1,
+};
+
+static int __init hp680bl_init(void)
+{
+ int ret;
+
+ ret=driver_register(&hp680bl_driver);
+ if (!ret) {
+ ret = platform_device_register(&hp680bl_device);
+ if (ret)
+ driver_unregister(&hp680bl_driver);
+ }
+ return ret;
+}
+
+static void __exit hp680bl_exit(void)
+{
+ platform_device_unregister(&hp680bl_device);
+ driver_unregister(&hp680bl_driver);
+}
+
+module_init(hp680bl_init);
+module_exit(hp680bl_exit);
+
+MODULE_AUTHOR("Andriy Skulysh <askulysh@image.kiev.ua>");
+MODULE_DESCRIPTION("HP Jornada 680 Backlight Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index 68c6906..9e32485 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -13,7 +13,6 @@
#include <linux/ctype.h>
#include <linux/err.h>
#include <linux/fb.h>
-#include <asm/bug.h>
static ssize_t lcd_show_power(struct class_device *cdev, char *buf)
{
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index a7bcd17..0339f56 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -30,10 +30,11 @@
#define STI_DRIVERVERSION "Version 0.9a"
-struct sti_struct *default_sti;
+struct sti_struct *default_sti __read_mostly;
-static int num_sti_roms; /* # of STI ROMS found */
-static struct sti_struct *sti_roms[MAX_STI_ROMS]; /* ptr to each sti_struct */
+/* number of STI ROMS found and their ptrs to each struct */
+static int num_sti_roms __read_mostly;
+static struct sti_struct *sti_roms[MAX_STI_ROMS] __read_mostly;
/* The colour indices used by STI are
@@ -266,7 +267,7 @@
-static char default_sti_path[21];
+static char default_sti_path[21] __read_mostly;
#ifndef MODULE
static int __init sti_setup(char *str)
@@ -414,10 +415,10 @@
if (!sti->sti_mem_request)
sti->sti_mem_request = 256; /* STI default */
- glob_cfg = kmalloc(sizeof(*sti->glob_cfg), GFP_KERNEL);
- glob_cfg_ext = kmalloc(sizeof(*glob_cfg_ext), GFP_KERNEL);
- save_addr = kmalloc(save_addr_size, GFP_KERNEL);
- sti_mem_addr = kmalloc(sti->sti_mem_request, GFP_KERNEL);
+ glob_cfg = kzalloc(sizeof(*sti->glob_cfg), GFP_KERNEL);
+ glob_cfg_ext = kzalloc(sizeof(*glob_cfg_ext), GFP_KERNEL);
+ save_addr = kzalloc(save_addr_size, GFP_KERNEL);
+ sti_mem_addr = kzalloc(sti->sti_mem_request, GFP_KERNEL);
if (!(glob_cfg && glob_cfg_ext && save_addr && sti_mem_addr)) {
kfree(glob_cfg);
@@ -427,11 +428,6 @@
return -ENOMEM;
}
- memset(glob_cfg, 0, sizeof(*glob_cfg));
- memset(glob_cfg_ext, 0, sizeof(*glob_cfg_ext));
- memset(save_addr, 0, save_addr_size);
- memset(sti_mem_addr, 0, sti->sti_mem_request);
-
glob_cfg->ext_ptr = STI_PTR(glob_cfg_ext);
glob_cfg->save_addr = STI_PTR(save_addr);
for (i=0; i<8; i++) {
@@ -502,9 +498,9 @@
#ifdef CONFIG_FB
struct sti_cooked_font * __init
-sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name )
+sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
{
- struct font_desc *fbfont;
+ const struct font_desc *fbfont;
unsigned int size, bpc;
void *dest;
struct sti_rom_font *nf;
@@ -525,10 +521,9 @@
size = bpc * 256;
size += sizeof(struct sti_rom_font);
- nf = kmalloc(size, GFP_KERNEL);
+ nf = kzalloc(size, GFP_KERNEL);
if (!nf)
return NULL;
- memset(nf, 0, size);
nf->first_char = 0;
nf->last_char = 255;
@@ -544,7 +539,7 @@
dest += sizeof(struct sti_rom_font);
memcpy(dest, fbfont->data, bpc*256);
- cooked_font = kmalloc(sizeof(*cooked_font), GFP_KERNEL);
+ cooked_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL);
if (!cooked_font) {
kfree(nf);
return NULL;
@@ -559,7 +554,7 @@
}
#else
struct sti_cooked_font * __init
-sti_select_fbfont(struct sti_cooked_rom *cooked_rom, char *fbfont_name)
+sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
{
return NULL;
}
@@ -617,7 +612,7 @@
struct sti_rom_font *raw_font, *font_start;
struct sti_cooked_font *cooked_font;
- cooked_font = kmalloc(sizeof(*cooked_font), GFP_KERNEL);
+ cooked_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL);
if (!cooked_font)
return 0;
@@ -631,7 +626,7 @@
while (raw_font->next_font) {
raw_font = ((void *)font_start) + (raw_font->next_font);
- cooked_font->next_font = kmalloc(sizeof(*cooked_font), GFP_KERNEL);
+ cooked_font->next_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL);
if (!cooked_font->next_font)
return 1;
@@ -668,10 +663,9 @@
unsigned char *n, *p, *q;
int size = f->raw->bytes_per_char*256+sizeof(struct sti_rom_font);
- n = kmalloc (4*size, GFP_KERNEL);
+ n = kzalloc (4*size, GFP_KERNEL);
if (!n)
return NULL;
- memset (n, 0, 4*size);
p = n + 3;
q = (unsigned char *)f->raw;
while (size--) {
@@ -816,13 +810,12 @@
return NULL;
}
- sti = kmalloc(sizeof(*sti), GFP_KERNEL);
+ sti = kzalloc(sizeof(*sti), GFP_KERNEL);
if (!sti) {
printk(KERN_ERR "Not enough memory !\n");
return NULL;
}
- memset(sti, 0, sizeof(*sti));
spin_lock_init(&sti->lock);
test_rom:
@@ -1035,7 +1028,7 @@
* sti_init_roms() - detects all STI ROMs and stores them in sti_roms[]
*/
-static int sticore_initialized;
+static int sticore_initialized __read_mostly;
static void __init sti_init_roms(void)
{
diff --git a/drivers/video/cyblafb.c b/drivers/video/cyblafb.c
index 2b97246..0ae0a97 100644
--- a/drivers/video/cyblafb.c
+++ b/drivers/video/cyblafb.c
@@ -1665,7 +1665,6 @@
}
#endif
output("CyblaFB version %s initializing\n", VERSION);
- return pci_module_init(&cyblafb_pci_driver);
return pci_register_driver(&cyblafb_pci_driver);
}
diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c
index bd410e0..e3c8b5f 100644
--- a/drivers/video/i810/i810-i2c.c
+++ b/drivers/video/i810/i810-i2c.c
@@ -191,11 +191,11 @@
u8 *edid = NULL;
int i;
- DPRINTK("i810-i2c: Probe DDC%i Bus\n", conn);
- if (conn < 4) {
+ DPRINTK("i810-i2c: Probe DDC%i Bus\n", conn+1);
+ if (conn < par->ddc_num) {
for (i = 0; i < 3; i++) {
/* Do the real work */
- edid = i810_do_probe_i2c_edid(&par->chan[conn-1]);
+ edid = i810_do_probe_i2c_edid(&par->chan[conn]);
if (edid)
break;
}
diff --git a/drivers/video/i810/i810.h b/drivers/video/i810/i810.h
index 6c187d5..579195c 100644
--- a/drivers/video/i810/i810.h
+++ b/drivers/video/i810/i810.h
@@ -280,6 +280,7 @@
u32 blit_bpp;
u32 ovract;
u32 cur_state;
+ u32 ddc_num;
int mtrr_reg;
u16 bltcntl;
u8 interlace;
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 266d0ab..d8467c0 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -149,6 +149,7 @@
static int sync __devinitdata;
static int extvga __devinitdata;
static int dcolor __devinitdata;
+static int ddc3 __devinitdata = 2;
/*------------------------------------------------------------*/
@@ -1763,6 +1764,8 @@
if (sync)
par->dev_flags |= ALWAYS_SYNC;
+ par->ddc_num = ddc3;
+
if (bpp < 8)
bpp = 8;
@@ -1885,7 +1888,7 @@
int found = 0;
#ifdef CONFIG_FB_I810_I2C
int i;
- int err;
+ int err = 1;
struct i810fb_par *par = info->par;
#endif
@@ -1895,8 +1898,8 @@
#ifdef CONFIG_FB_I810_I2C
i810_create_i2c_busses(par);
- for (i = 0; i < 4; i++) {
- err = i810_probe_i2c_connector(info, &par->edid, i+1);
+ for (i = 0; i < par->ddc_num + 1; i++) {
+ err = i810_probe_i2c_connector(info, &par->edid, i);
if (!err)
break;
}
@@ -1983,6 +1986,8 @@
vsync2 = simple_strtoul(this_opt+7, NULL, 0);
else if (!strncmp(this_opt, "dcolor", 6))
dcolor = 1;
+ else if (!strncmp(this_opt, "ddc3", 4))
+ ddc3 = 3;
else
mode_option = this_opt;
}
@@ -2190,6 +2195,8 @@
module_param(dcolor, bool, 0);
MODULE_PARM_DESC(dcolor, "use DirectColor visuals"
" (default = 0 = TrueColor)");
+module_param(ddc3, bool, 0);
+MODULE_PARM_DESC(ddc3, "Probe DDC bus 3 (default = 0 = no)");
module_param(mode_option, charp, 0);
MODULE_PARM_DESC(mode_option, "Specify initial video mode");
diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/pmag-ba-fb.c
index f3927b6..f5361cd 100644
--- a/drivers/video/pmag-ba-fb.c
+++ b/drivers/video/pmag-ba-fb.c
@@ -30,7 +30,6 @@
#include <linux/module.h>
#include <linux/types.h>
-#include <asm/bug.h>
#include <asm/io.h>
#include <asm/system.h>
diff --git a/drivers/video/pmagb-b-fb.c b/drivers/video/pmagb-b-fb.c
index 25148de..eeeac92 100644
--- a/drivers/video/pmagb-b-fb.c
+++ b/drivers/video/pmagb-b-fb.c
@@ -27,7 +27,6 @@
#include <linux/module.h>
#include <linux/types.h>
-#include <asm/bug.h>
#include <asm/io.h>
#include <asm/system.h>
diff --git a/fs/9p/conv.c b/fs/9p/conv.c
index 32a9f99..bf1f100 100644
--- a/fs/9p/conv.c
+++ b/fs/9p/conv.c
@@ -116,13 +116,19 @@
}
}
-static void buf_put_stringn(struct cbuf *buf, const char *s, u16 slen)
+static char *buf_put_stringn(struct cbuf *buf, const char *s, u16 slen)
{
+ char *ret;
+
+ ret = NULL;
if (buf_check_size(buf, slen + 2)) {
buf_put_int16(buf, slen);
+ ret = buf->p;
memcpy(buf->p, s, slen);
buf->p += slen;
}
+
+ return ret;
}
static inline void buf_put_string(struct cbuf *buf, const char *s)
@@ -430,15 +436,19 @@
static void
v9fs_put_str(struct cbuf *bufp, char *data, struct v9fs_str *str)
{
- if (data) {
- str->len = strlen(data);
- str->str = bufp->p;
- } else {
- str->len = 0;
- str->str = NULL;
- }
+ int len;
+ char *s;
- buf_put_stringn(bufp, data, str->len);
+ if (data)
+ len = strlen(data);
+ else
+ len = 0;
+
+ s = buf_put_stringn(bufp, data, len);
+ if (str) {
+ str->len = len;
+ str->str = s;
+ }
}
static int
diff --git a/fs/9p/mux.c b/fs/9p/mux.c
index 945cb36..ea1134e 100644
--- a/fs/9p/mux.c
+++ b/fs/9p/mux.c
@@ -471,10 +471,13 @@
}
spin_lock(&m->lock);
- req =
- list_entry(m->unsent_req_list.next, struct v9fs_req,
+again:
+ req = list_entry(m->unsent_req_list.next, struct v9fs_req,
req_list);
list_move_tail(&req->req_list, &m->req_list);
+ if (req->err == ERREQFLUSH)
+ goto again;
+
m->wbuf = req->tcall->sdata;
m->wsize = req->tcall->size;
m->wpos = 0;
@@ -525,7 +528,7 @@
struct v9fs_str *ename;
tag = req->tag;
- if (req->rcall->id == RERROR && !req->err) {
+ if (!req->err && req->rcall->id == RERROR) {
ecode = req->rcall->params.rerror.errno;
ename = &req->rcall->params.rerror.error;
@@ -551,7 +554,10 @@
req->err = -EIO;
}
- if (req->cb && req->err != ERREQFLUSH) {
+ if (req->err == ERREQFLUSH)
+ return;
+
+ if (req->cb) {
dprintk(DEBUG_MUX, "calling callback tcall %p rcall %p\n",
req->tcall, req->rcall);
@@ -812,6 +818,7 @@
struct v9fs_mux_rpc *r;
if (err == ERREQFLUSH) {
+ kfree(rc);
dprintk(DEBUG_MUX, "err req flush\n");
return;
}
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 91f5524..63e5b03 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -886,8 +886,8 @@
}
/* copy extension buffer into buffer */
- if (fcall->params.rstat.stat.extension.len < buflen)
- buflen = fcall->params.rstat.stat.extension.len;
+ if (fcall->params.rstat.stat.extension.len+1 < buflen)
+ buflen = fcall->params.rstat.stat.extension.len + 1;
memcpy(buffer, fcall->params.rstat.stat.extension.str, buflen - 1);
buffer[buflen-1] = 0;
@@ -951,7 +951,7 @@
if (!link)
link = ERR_PTR(-ENOMEM);
else {
- len = v9fs_readlink(dentry, link, strlen(link));
+ len = v9fs_readlink(dentry, link, PATH_MAX);
if (len < 0) {
__putname(link);
diff --git a/fs/Kconfig b/fs/Kconfig
index ef78e3a..e9749b0 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -883,8 +883,6 @@
Both sysfs and configfs can and should exist together on the
same system. One is not a replacement for the other.
- If unsure, say N.
-
endmenu
menu "Miscellaneous filesystems"
@@ -1327,7 +1325,7 @@
config UFS_FS_WRITE
bool "UFS file system write support (DANGEROUS)"
- depends on UFS_FS && EXPERIMENTAL
+ depends on UFS_FS && EXPERIMENTAL && BROKEN
help
Say Y here if you want to try writing to UFS partitions. This is
experimental, so you should back up your UFS partitions beforehand.
diff --git a/fs/bio.c b/fs/bio.c
index bbc442b..1f3bb50 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -411,6 +411,7 @@
/**
* bio_add_pc_page - attempt to add page to bio
+ * @q: the target queue
* @bio: destination bio
* @page: page to add
* @len: vec entry length
diff --git a/fs/buffer.c b/fs/buffer.c
index 3dc712f..62cfd17 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1022,6 +1022,7 @@
bh->b_state = 0;
atomic_set(&bh->b_count, 0);
+ bh->b_private = NULL;
bh->b_size = size;
/* Link the buffer to its page */
@@ -2866,22 +2867,22 @@
else if (test_set_buffer_locked(bh))
continue;
- get_bh(bh);
if (rw == WRITE || rw == SWRITE) {
if (test_clear_buffer_dirty(bh)) {
bh->b_end_io = end_buffer_write_sync;
+ get_bh(bh);
submit_bh(WRITE, bh);
continue;
}
} else {
if (!buffer_uptodate(bh)) {
bh->b_end_io = end_buffer_read_sync;
+ get_bh(bh);
submit_bh(rw, bh);
continue;
}
}
unlock_buffer(bh);
- put_bh(bh);
}
}
@@ -3050,6 +3051,66 @@
}
/*
+ * Migration function for pages with buffers. This function can only be used
+ * if the underlying filesystem guarantees that no other references to "page"
+ * exist.
+ */
+#ifdef CONFIG_MIGRATION
+int buffer_migrate_page(struct page *newpage, struct page *page)
+{
+ struct address_space *mapping = page->mapping;
+ struct buffer_head *bh, *head;
+
+ if (!mapping)
+ return -EAGAIN;
+
+ if (!page_has_buffers(page))
+ return migrate_page(newpage, page);
+
+ head = page_buffers(page);
+
+ if (migrate_page_remove_references(newpage, page, 3))
+ return -EAGAIN;
+
+ bh = head;
+ do {
+ get_bh(bh);
+ lock_buffer(bh);
+ bh = bh->b_this_page;
+
+ } while (bh != head);
+
+ ClearPagePrivate(page);
+ set_page_private(newpage, page_private(page));
+ set_page_private(page, 0);
+ put_page(page);
+ get_page(newpage);
+
+ bh = head;
+ do {
+ set_bh_page(bh, newpage, bh_offset(bh));
+ bh = bh->b_this_page;
+
+ } while (bh != head);
+
+ SetPagePrivate(newpage);
+
+ migrate_page_copy(newpage, page);
+
+ bh = head;
+ do {
+ unlock_buffer(bh);
+ put_bh(bh);
+ bh = bh->b_this_page;
+
+ } while (bh != head);
+
+ return 0;
+}
+EXPORT_SYMBOL(buffer_migrate_page);
+#endif
+
+/*
* Buffer-head allocation
*/
static kmem_cache_t *bh_cachep;
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 88f60aa..e488603 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1785,7 +1785,16 @@
} else if(volume_info.wsize)
cifs_sb->wsize = volume_info.wsize;
else
- cifs_sb->wsize = CIFSMaxBufSize; /* default */
+ cifs_sb->wsize =
+ min_t(const int, PAGEVEC_SIZE * PAGE_CACHE_SIZE,
+ 127*1024);
+ /* old default of CIFSMaxBufSize was too small now
+ that SMB Write2 can send multiple pages in kvec.
+ RFC1001 does not describe what happens when frame
+ bigger than 128K is sent so use that as max in
+ conjunction with 52K kvec constraint on arch with 4K
+ page size */
+
if(cifs_sb->rsize < PAGE_CACHE_SIZE) {
cifs_sb->rsize = PAGE_CACHE_SIZE;
/* Windows ME does this */
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 77c990f0..d17c97d 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1190,7 +1190,6 @@
/* BB what if continued retry is
requested via mount flags? */
set_bit(AS_EIO, &mapping->flags);
- SetPageError(page);
} else {
cifs_stats_bytes_written(cifs_sb->tcon,
bytes_written);
@@ -1198,6 +1197,13 @@
}
for (i = 0; i < n_iov; i++) {
page = pvec.pages[first + i];
+ /* Should we also set page error on
+ success rc but too little data written? */
+ /* BB investigate retry logic on temporary
+ server crash cases and how recovery works
+ when page marked as error */
+ if(rc)
+ SetPageError(page);
kunmap(page);
unlock_page(page);
page_cache_release(page);
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 7b98792..b12cb8a 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -498,7 +498,6 @@
else
*pRespBufType = CIFS_SMALL_BUFFER;
iov[0].iov_len = receive_len + 4;
- iov[1].iov_len = 0;
dump_smb(midQ->resp_buf, 80);
/* convert the length into a more usable form */
diff --git a/fs/compat.c b/fs/compat.c
index ff0bafc..70c5af4 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -73,17 +73,17 @@
return do_utimes(AT_FDCWD, filename, t ? tv : NULL);
}
-asmlinkage long compat_sys_futimesat(int dfd, char __user *filename, struct compat_timeval __user *t)
+asmlinkage long compat_sys_futimesat(unsigned int dfd, char __user *filename, struct compat_timeval __user *t)
{
struct timeval tv[2];
- if (t) {
+ if (t) {
if (get_user(tv[0].tv_sec, &t[0].tv_sec) ||
get_user(tv[0].tv_usec, &t[0].tv_usec) ||
get_user(tv[1].tv_sec, &t[1].tv_sec) ||
get_user(tv[1].tv_usec, &t[1].tv_usec))
- return -EFAULT;
- }
+ return -EFAULT;
+ }
return do_utimes(dfd, filename, t ? tv : NULL);
}
@@ -114,7 +114,7 @@
return error;
}
-asmlinkage long compat_sys_newfstatat(int dfd, char __user *filename,
+asmlinkage long compat_sys_newfstatat(unsigned int dfd, char __user *filename,
struct compat_stat __user *statbuf, int flag)
{
struct kstat stat;
@@ -1326,7 +1326,7 @@
* O_LARGEFILE flag.
*/
asmlinkage long
-compat_sys_openat(int dfd, const char __user *filename, int flags, int mode)
+compat_sys_openat(unsigned int dfd, const char __user *filename, int flags, int mode)
{
return do_sys_open(dfd, filename, flags, mode);
}
@@ -1781,7 +1781,7 @@
{
compat_sigset_t ss32;
sigset_t ksigmask, sigsaved;
- long timeout = MAX_SCHEDULE_TIMEOUT;
+ s64 timeout = MAX_SCHEDULE_TIMEOUT;
struct compat_timespec ts;
int ret;
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 5dd0207..057e602 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -931,8 +931,8 @@
static int sg_grt_trans(unsigned int fd, unsigned int cmd, unsigned long arg)
{
int err, i;
- sg_req_info_t *r;
- struct compat_sg_req_info *o = (struct compat_sg_req_info *)arg;
+ sg_req_info_t __user *r;
+ struct compat_sg_req_info __user *o = (void __user *)arg;
r = compat_alloc_user_space(sizeof(sg_req_info_t)*SG_MAX_QUEUE);
err = sys_ioctl(fd,cmd,(unsigned long)r);
if (err < 0)
@@ -2739,8 +2739,8 @@
static int
lp_timeout_trans(unsigned int fd, unsigned int cmd, unsigned long arg)
{
- struct compat_timeval *tc = (struct compat_timeval *)arg;
- struct timeval *tn = compat_alloc_user_space(sizeof(struct timeval));
+ struct compat_timeval __user *tc = (struct compat_timeval __user *)arg;
+ struct timeval __user *tn = compat_alloc_user_space(sizeof(struct timeval));
struct timeval ts;
if (get_user(ts.tv_sec, &tc->tv_sec) ||
get_user(ts.tv_usec, &tc->tv_usec) ||
diff --git a/fs/configfs/configfs_internal.h b/fs/configfs/configfs_internal.h
index 8899d9c..f70e469 100644
--- a/fs/configfs/configfs_internal.h
+++ b/fs/configfs/configfs_internal.h
@@ -36,6 +36,7 @@
int s_type;
umode_t s_mode;
struct dentry * s_dentry;
+ struct iattr * s_iattr;
};
#define CONFIGFS_ROOT 0x0001
@@ -48,10 +49,11 @@
#define CONFIGFS_NOT_PINNED (CONFIGFS_ITEM_ATTR)
extern struct vfsmount * configfs_mount;
+extern kmem_cache_t *configfs_dir_cachep;
extern int configfs_is_root(struct config_item *item);
-extern struct inode * configfs_new_inode(mode_t mode);
+extern struct inode * configfs_new_inode(mode_t mode, struct configfs_dirent *);
extern int configfs_create(struct dentry *, int mode, int (*init)(struct inode *));
extern int configfs_create_file(struct config_item *, const struct configfs_attribute *);
@@ -63,6 +65,7 @@
extern const unsigned char * configfs_get_name(struct configfs_dirent *sd);
extern void configfs_drop_dentry(struct configfs_dirent *sd, struct dentry *parent);
+extern int configfs_setattr(struct dentry *dentry, struct iattr *iattr);
extern int configfs_pin_fs(void);
extern void configfs_release_fs(void);
@@ -120,8 +123,10 @@
static inline void release_configfs_dirent(struct configfs_dirent * sd)
{
- if (!(sd->s_type & CONFIGFS_ROOT))
- kfree(sd);
+ if (!(sd->s_type & CONFIGFS_ROOT)) {
+ kfree(sd->s_iattr);
+ kmem_cache_free(configfs_dir_cachep, sd);
+ }
}
static inline struct configfs_dirent * configfs_get(struct configfs_dirent * sd)
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index b668ec6..ca60e3a 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -72,7 +72,7 @@
{
struct configfs_dirent * sd;
- sd = kmalloc(sizeof(*sd), GFP_KERNEL);
+ sd = kmem_cache_alloc(configfs_dir_cachep, GFP_KERNEL);
if (!sd)
return NULL;
@@ -136,13 +136,19 @@
int error;
umode_t mode = S_IFDIR| S_IRWXU | S_IRUGO | S_IXUGO;
- error = configfs_create(d, mode, init_dir);
+ error = configfs_make_dirent(p->d_fsdata, d, k, mode,
+ CONFIGFS_DIR);
if (!error) {
- error = configfs_make_dirent(p->d_fsdata, d, k, mode,
- CONFIGFS_DIR);
+ error = configfs_create(d, mode, init_dir);
if (!error) {
p->d_inode->i_nlink++;
(d)->d_op = &configfs_dentry_ops;
+ } else {
+ struct configfs_dirent *sd = d->d_fsdata;
+ if (sd) {
+ list_del_init(&sd->s_sibling);
+ configfs_put(sd);
+ }
}
}
return error;
@@ -182,12 +188,19 @@
int err = 0;
umode_t mode = S_IFLNK | S_IRWXUGO;
- err = configfs_create(dentry, mode, init_symlink);
+ err = configfs_make_dirent(parent->d_fsdata, dentry, sl, mode,
+ CONFIGFS_ITEM_LINK);
if (!err) {
- err = configfs_make_dirent(parent->d_fsdata, dentry, sl,
- mode, CONFIGFS_ITEM_LINK);
+ err = configfs_create(dentry, mode, init_symlink);
if (!err)
dentry->d_op = &configfs_dentry_ops;
+ else {
+ struct configfs_dirent *sd = dentry->d_fsdata;
+ if (sd) {
+ list_del_init(&sd->s_sibling);
+ configfs_put(sd);
+ }
+ }
}
return err;
}
@@ -241,13 +254,15 @@
struct configfs_attribute * attr = sd->s_element;
int error;
- error = configfs_create(dentry, (attr->ca_mode & S_IALLUGO) | S_IFREG, init_file);
- if (error)
- return error;
-
- dentry->d_op = &configfs_dentry_ops;
dentry->d_fsdata = configfs_get(sd);
sd->s_dentry = dentry;
+ error = configfs_create(dentry, (attr->ca_mode & S_IALLUGO) | S_IFREG, init_file);
+ if (error) {
+ configfs_put(sd);
+ return error;
+ }
+
+ dentry->d_op = &configfs_dentry_ops;
d_rehash(dentry);
return 0;
@@ -839,6 +854,7 @@
.symlink = configfs_symlink,
.unlink = configfs_unlink,
.lookup = configfs_lookup,
+ .setattr = configfs_setattr,
};
#if 0
diff --git a/fs/configfs/file.c b/fs/configfs/file.c
index c26cd61..3921920 100644
--- a/fs/configfs/file.c
+++ b/fs/configfs/file.c
@@ -26,7 +26,6 @@
#include <linux/fs.h>
#include <linux/module.h>
-#include <linux/dnotify.h>
#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/semaphore.h>
@@ -150,7 +149,7 @@
/**
* fill_write_buffer - copy buffer from userspace.
* @buffer: data buffer for file.
- * @userbuf: data from user.
+ * @buf: data from user.
* @count: number of bytes in @userbuf.
*
* Allocate @buffer->page if it hasn't been already, then
@@ -177,8 +176,9 @@
/**
* flush_write_buffer - push buffer to config_item.
- * @file: file pointer.
+ * @dentry: dentry to the attribute
* @buffer: data buffer for file.
+ * @count: number of bytes
*
* Get the correct pointers for the config_item and the attribute we're
* dealing with, then call the store() method for the attribute,
@@ -217,15 +217,16 @@
configfs_write_file(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
{
struct configfs_buffer * buffer = file->private_data;
+ ssize_t len;
down(&buffer->sem);
- count = fill_write_buffer(buffer,buf,count);
- if (count > 0)
- count = flush_write_buffer(file->f_dentry,buffer,count);
- if (count > 0)
- *ppos += count;
+ len = fill_write_buffer(buffer, buf, count);
+ if (len > 0)
+ len = flush_write_buffer(file->f_dentry, buffer, count);
+ if (len > 0)
+ *ppos += len;
up(&buffer->sem);
- return count;
+ return len;
}
static int check_perm(struct inode * inode, struct file * file)
diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c
index 6577c58..c153bd9 100644
--- a/fs/configfs/inode.c
+++ b/fs/configfs/inode.c
@@ -31,6 +31,7 @@
#include <linux/pagemap.h>
#include <linux/namei.h>
#include <linux/backing-dev.h>
+#include <linux/capability.h>
#include <linux/configfs.h>
#include "configfs_internal.h"
@@ -48,18 +49,107 @@
.capabilities = BDI_CAP_NO_ACCT_DIRTY | BDI_CAP_NO_WRITEBACK,
};
-struct inode * configfs_new_inode(mode_t mode)
+static struct inode_operations configfs_inode_operations ={
+ .setattr = configfs_setattr,
+};
+
+int configfs_setattr(struct dentry * dentry, struct iattr * iattr)
+{
+ struct inode * inode = dentry->d_inode;
+ struct configfs_dirent * sd = dentry->d_fsdata;
+ struct iattr * sd_iattr;
+ unsigned int ia_valid = iattr->ia_valid;
+ int error;
+
+ if (!sd)
+ return -EINVAL;
+
+ sd_iattr = sd->s_iattr;
+
+ error = inode_change_ok(inode, iattr);
+ if (error)
+ return error;
+
+ error = inode_setattr(inode, iattr);
+ if (error)
+ return error;
+
+ if (!sd_iattr) {
+ /* setting attributes for the first time, allocate now */
+ sd_iattr = kmalloc(sizeof(struct iattr), GFP_KERNEL);
+ if (!sd_iattr)
+ return -ENOMEM;
+ /* assign default attributes */
+ memset(sd_iattr, 0, sizeof(struct iattr));
+ sd_iattr->ia_mode = sd->s_mode;
+ sd_iattr->ia_uid = 0;
+ sd_iattr->ia_gid = 0;
+ sd_iattr->ia_atime = sd_iattr->ia_mtime = sd_iattr->ia_ctime = CURRENT_TIME;
+ sd->s_iattr = sd_iattr;
+ }
+
+ /* attributes were changed atleast once in past */
+
+ if (ia_valid & ATTR_UID)
+ sd_iattr->ia_uid = iattr->ia_uid;
+ if (ia_valid & ATTR_GID)
+ sd_iattr->ia_gid = iattr->ia_gid;
+ if (ia_valid & ATTR_ATIME)
+ sd_iattr->ia_atime = timespec_trunc(iattr->ia_atime,
+ inode->i_sb->s_time_gran);
+ if (ia_valid & ATTR_MTIME)
+ sd_iattr->ia_mtime = timespec_trunc(iattr->ia_mtime,
+ inode->i_sb->s_time_gran);
+ if (ia_valid & ATTR_CTIME)
+ sd_iattr->ia_ctime = timespec_trunc(iattr->ia_ctime,
+ inode->i_sb->s_time_gran);
+ if (ia_valid & ATTR_MODE) {
+ umode_t mode = iattr->ia_mode;
+
+ if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID))
+ mode &= ~S_ISGID;
+ sd_iattr->ia_mode = sd->s_mode = mode;
+ }
+
+ return error;
+}
+
+static inline void set_default_inode_attr(struct inode * inode, mode_t mode)
+{
+ inode->i_mode = mode;
+ inode->i_uid = 0;
+ inode->i_gid = 0;
+ inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+}
+
+static inline void set_inode_attr(struct inode * inode, struct iattr * iattr)
+{
+ inode->i_mode = iattr->ia_mode;
+ inode->i_uid = iattr->ia_uid;
+ inode->i_gid = iattr->ia_gid;
+ inode->i_atime = iattr->ia_atime;
+ inode->i_mtime = iattr->ia_mtime;
+ inode->i_ctime = iattr->ia_ctime;
+}
+
+struct inode * configfs_new_inode(mode_t mode, struct configfs_dirent * sd)
{
struct inode * inode = new_inode(configfs_sb);
if (inode) {
- inode->i_mode = mode;
- inode->i_uid = 0;
- inode->i_gid = 0;
inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
- inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
inode->i_mapping->a_ops = &configfs_aops;
inode->i_mapping->backing_dev_info = &configfs_backing_dev_info;
+ inode->i_op = &configfs_inode_operations;
+
+ if (sd->s_iattr) {
+ /* sysfs_dirent has non-default attributes
+ * get them for the new inode from persistent copy
+ * in sysfs_dirent
+ */
+ set_inode_attr(inode, sd->s_iattr);
+ } else
+ set_default_inode_attr(inode, mode);
}
return inode;
}
@@ -70,7 +160,8 @@
struct inode * inode = NULL;
if (dentry) {
if (!dentry->d_inode) {
- if ((inode = configfs_new_inode(mode))) {
+ struct configfs_dirent *sd = dentry->d_fsdata;
+ if ((inode = configfs_new_inode(mode, sd))) {
if (dentry->d_parent && dentry->d_parent->d_inode) {
struct inode *p_inode = dentry->d_parent->d_inode;
p_inode->i_mtime = p_inode->i_ctime = CURRENT_TIME;
@@ -103,10 +194,9 @@
*/
const unsigned char * configfs_get_name(struct configfs_dirent *sd)
{
- struct attribute * attr;
+ struct configfs_attribute *attr;
- if (!sd || !sd->s_element)
- BUG();
+ BUG_ON(!sd || !sd->s_element);
/* These always have a dentry, so use that */
if (sd->s_type & (CONFIGFS_DIR | CONFIGFS_ITEM_LINK))
@@ -114,7 +204,7 @@
if (sd->s_type & CONFIGFS_ITEM_ATTR) {
attr = sd->s_element;
- return attr->name;
+ return attr->ca_name;
}
return NULL;
}
@@ -130,13 +220,17 @@
if (dentry) {
spin_lock(&dcache_lock);
+ spin_lock(&dentry->d_lock);
if (!(d_unhashed(dentry) && dentry->d_inode)) {
dget_locked(dentry);
__d_drop(dentry);
+ spin_unlock(&dentry->d_lock);
spin_unlock(&dcache_lock);
simple_unlink(parent->d_inode, dentry);
- } else
+ } else {
+ spin_unlock(&dentry->d_lock);
spin_unlock(&dcache_lock);
+ }
}
}
@@ -145,6 +239,10 @@
struct configfs_dirent * sd;
struct configfs_dirent * parent_sd = dir->d_fsdata;
+ if (dir->d_inode == NULL)
+ /* no inode means this hasn't been made visible yet */
+ return;
+
mutex_lock(&dir->d_inode->i_mutex);
list_for_each_entry(sd, &parent_sd->s_children, s_sibling) {
if (!sd->s_element)
diff --git a/fs/configfs/mount.c b/fs/configfs/mount.c
index 1a2f6f6..f920d30 100644
--- a/fs/configfs/mount.c
+++ b/fs/configfs/mount.c
@@ -38,6 +38,7 @@
struct vfsmount * configfs_mount = NULL;
struct super_block * configfs_sb = NULL;
+kmem_cache_t *configfs_dir_cachep;
static int configfs_mnt_count = 0;
static struct super_operations configfs_ops = {
@@ -62,6 +63,7 @@
.s_children = LIST_HEAD_INIT(configfs_root.s_children),
.s_element = &configfs_root_group.cg_item,
.s_type = CONFIGFS_ROOT,
+ .s_iattr = NULL,
};
static int configfs_fill_super(struct super_block *sb, void *data, int silent)
@@ -73,9 +75,11 @@
sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
sb->s_magic = CONFIGFS_MAGIC;
sb->s_op = &configfs_ops;
+ sb->s_time_gran = 1;
configfs_sb = sb;
- inode = configfs_new_inode(S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO);
+ inode = configfs_new_inode(S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO,
+ &configfs_root);
if (inode) {
inode->i_op = &configfs_dir_inode_operations;
inode->i_fop = &configfs_dir_operations;
@@ -128,19 +132,31 @@
static int __init configfs_init(void)
{
- int err;
+ int err = -ENOMEM;
+
+ configfs_dir_cachep = kmem_cache_create("configfs_dir_cache",
+ sizeof(struct configfs_dirent),
+ 0, 0, NULL, NULL);
+ if (!configfs_dir_cachep)
+ goto out;
kset_set_kset_s(&config_subsys, kernel_subsys);
err = subsystem_register(&config_subsys);
- if (err)
- return err;
+ if (err) {
+ kmem_cache_destroy(configfs_dir_cachep);
+ configfs_dir_cachep = NULL;
+ goto out;
+ }
err = register_filesystem(&configfs_fs_type);
if (err) {
printk(KERN_ERR "configfs: Unable to register filesystem!\n");
subsystem_unregister(&config_subsys);
+ kmem_cache_destroy(configfs_dir_cachep);
+ configfs_dir_cachep = NULL;
}
+out:
return err;
}
@@ -148,11 +164,13 @@
{
unregister_filesystem(&configfs_fs_type);
subsystem_unregister(&config_subsys);
+ kmem_cache_destroy(configfs_dir_cachep);
+ configfs_dir_cachep = NULL;
}
MODULE_AUTHOR("Oracle");
MODULE_LICENSE("GPL");
-MODULE_VERSION("0.0.1");
+MODULE_VERSION("0.0.2");
MODULE_DESCRIPTION("Simple RAM filesystem for user driven kernel subsystem configuration.");
module_init(configfs_init);
diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c
index 50f5840..e5512e2 100644
--- a/fs/configfs/symlink.c
+++ b/fs/configfs/symlink.c
@@ -162,8 +162,7 @@
if (!(sd->s_type & CONFIGFS_ITEM_LINK))
goto out;
- if (dentry->d_parent == configfs_sb->s_root)
- BUG();
+ BUG_ON(dentry->d_parent == configfs_sb->s_root);
sl = sd->s_element;
@@ -277,5 +276,6 @@
.follow_link = configfs_follow_link,
.readlink = generic_readlink,
.put_link = configfs_put_link,
+ .setattr = configfs_setattr,
};
diff --git a/fs/dcache.c b/fs/dcache.c
index 86bdb93..a173bba 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -743,7 +743,9 @@
dentry->d_op = NULL;
dentry->d_fsdata = NULL;
dentry->d_mounted = 0;
+#ifdef CONFIG_PROFILING
dentry->d_cookie = NULL;
+#endif
INIT_HLIST_NODE(&dentry->d_hash);
INIT_LIST_HEAD(&dentry->d_lru);
INIT_LIST_HEAD(&dentry->d_subdirs);
diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
index efc97d9..d575452 100644
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -56,7 +56,7 @@
DEFINE_SIMPLE_ATTRIBUTE(fops_u8, debugfs_u8_get, debugfs_u8_set, "%llu\n");
/**
- * debugfs_create_u8 - create a file in the debugfs filesystem that is used to read and write a unsigned 8 bit value.
+ * debugfs_create_u8 - create a file in the debugfs filesystem that is used to read and write an unsigned 8 bit value.
*
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
@@ -98,7 +98,7 @@
DEFINE_SIMPLE_ATTRIBUTE(fops_u16, debugfs_u16_get, debugfs_u16_set, "%llu\n");
/**
- * debugfs_create_u16 - create a file in the debugfs filesystem that is used to read and write a unsigned 8 bit value.
+ * debugfs_create_u16 - create a file in the debugfs filesystem that is used to read and write an unsigned 16 bit value.
*
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
@@ -140,7 +140,7 @@
DEFINE_SIMPLE_ATTRIBUTE(fops_u32, debugfs_u32_get, debugfs_u32_set, "%llu\n");
/**
- * debugfs_create_u32 - create a file in the debugfs filesystem that is used to read and write a unsigned 8 bit value.
+ * debugfs_create_u32 - create a file in the debugfs filesystem that is used to read and write an unsigned 32 bit value.
*
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 30dbbd1..848044a 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -857,6 +857,7 @@
/* Handle holes */
if (!buffer_mapped(map_bh)) {
char *kaddr;
+ loff_t i_size_aligned;
/* AKPM: eargh, -ENOTBLK is a hack */
if (dio->rw == WRITE) {
@@ -864,8 +865,14 @@
return -ENOTBLK;
}
+ /*
+ * Be sure to account for a partial block as the
+ * last block in the file
+ */
+ i_size_aligned = ALIGN(i_size_read(dio->inode),
+ 1 << blkbits);
if (dio->block_in_file >=
- i_size_read(dio->inode)>>blkbits) {
+ i_size_aligned >> blkbits) {
/* We hit eof */
page_cache_release(page);
goto out;
diff --git a/fs/ext2/acl.c b/fs/ext2/acl.c
index 35acc43..da52b4a 100644
--- a/fs/ext2/acl.c
+++ b/fs/ext2/acl.c
@@ -220,7 +220,7 @@
struct ext2_inode_info *ei = EXT2_I(inode);
int name_index;
void *value = NULL;
- size_t size;
+ size_t size = 0;
int error;
if (S_ISLNK(inode->i_mode))
diff --git a/fs/ext2/ialloc.c b/fs/ext2/ialloc.c
index 74714af..e527652 100644
--- a/fs/ext2/ialloc.c
+++ b/fs/ext2/ialloc.c
@@ -605,7 +605,7 @@
insert_inode_hash(inode);
if (DQUOT_ALLOC_INODE(inode)) {
- err = -ENOSPC;
+ err = -EDQUOT;
goto fail_drop;
}
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index e7d3f05..a717837 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -706,6 +706,7 @@
.bmap = ext2_bmap,
.direct_IO = ext2_direct_IO,
.writepages = ext2_writepages,
+ .migratepage = buffer_migrate_page,
};
struct address_space_operations ext2_aops_xip = {
@@ -723,6 +724,7 @@
.bmap = ext2_bmap,
.direct_IO = ext2_direct_IO,
.writepages = ext2_writepages,
+ .migratepage = buffer_migrate_page,
};
/*
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 8d68198..cb6f9bd 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -221,6 +221,11 @@
seq_puts(seq, ",grpquota");
#endif
+#if defined(CONFIG_EXT2_FS_XIP)
+ if (sbi->s_mount_opt & EXT2_MOUNT_XIP)
+ seq_puts(seq, ",xip");
+#endif
+
return 0;
}
diff --git a/fs/ext3/acl.c b/fs/ext3/acl.c
index 47a9da2..0d21d55 100644
--- a/fs/ext3/acl.c
+++ b/fs/ext3/acl.c
@@ -226,7 +226,7 @@
struct ext3_inode_info *ei = EXT3_I(inode);
int name_index;
void *value = NULL;
- size_t size;
+ size_t size = 0;
int error;
if (S_ISLNK(inode->i_mode))
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 8824e84..3fc4238 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -1559,6 +1559,7 @@
.invalidatepage = ext3_invalidatepage,
.releasepage = ext3_releasepage,
.direct_IO = ext3_direct_IO,
+ .migratepage = buffer_migrate_page,
};
static struct address_space_operations ext3_writeback_aops = {
@@ -1572,6 +1573,7 @@
.invalidatepage = ext3_invalidatepage,
.releasepage = ext3_releasepage,
.direct_IO = ext3_direct_IO,
+ .migratepage = buffer_migrate_page,
};
static struct address_space_operations ext3_journalled_aops = {
diff --git a/fs/fat/file.c b/fs/fat/file.c
index e99c5a7..88aa1ae 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -210,10 +210,30 @@
if (MSDOS_I(inode)->i_start == 0)
return 0;
- /*
- * Write a new EOF, and get the remaining cluster chain for freeing.
- */
+ fat_cache_inval_inode(inode);
+
wait = IS_DIRSYNC(inode);
+ i_start = free_start = MSDOS_I(inode)->i_start;
+ i_logstart = MSDOS_I(inode)->i_logstart;
+
+ /* First, we write the new file size. */
+ if (!skip) {
+ MSDOS_I(inode)->i_start = 0;
+ MSDOS_I(inode)->i_logstart = 0;
+ }
+ MSDOS_I(inode)->i_attrs |= ATTR_ARCH;
+ inode->i_ctime = inode->i_mtime = CURRENT_TIME_SEC;
+ if (wait) {
+ err = fat_sync_inode(inode);
+ if (err) {
+ MSDOS_I(inode)->i_start = i_start;
+ MSDOS_I(inode)->i_logstart = i_logstart;
+ return err;
+ }
+ } else
+ mark_inode_dirty(inode);
+
+ /* Write a new EOF, and get the remaining cluster chain for freeing. */
if (skip) {
struct fat_entry fatent;
int ret, fclus, dclus;
@@ -244,35 +264,11 @@
return ret;
free_start = ret;
- i_start = i_logstart = 0;
- fat_cache_inval_inode(inode);
- } else {
- fat_cache_inval_inode(inode);
-
- i_start = free_start = MSDOS_I(inode)->i_start;
- i_logstart = MSDOS_I(inode)->i_logstart;
- MSDOS_I(inode)->i_start = 0;
- MSDOS_I(inode)->i_logstart = 0;
}
- MSDOS_I(inode)->i_attrs |= ATTR_ARCH;
- inode->i_ctime = inode->i_mtime = CURRENT_TIME_SEC;
- if (wait) {
- err = fat_sync_inode(inode);
- if (err)
- goto error;
- } else
- mark_inode_dirty(inode);
inode->i_blocks = skip << (MSDOS_SB(sb)->cluster_bits - 9);
/* Freeing the remained cluster chain */
return fat_free_clusters(inode, free_start);
-
-error:
- if (i_start) {
- MSDOS_I(inode)->i_start = i_start;
- MSDOS_I(inode)->i_logstart = i_logstart;
- }
- return err;
}
void fat_truncate(struct inode *inode)
diff --git a/fs/fat/misc.c b/fs/fat/misc.c
index 32fb0a3..944652e 100644
--- a/fs/fat/misc.c
+++ b/fs/fat/misc.c
@@ -196,19 +196,9 @@
int fat_sync_bhs(struct buffer_head **bhs, int nr_bhs)
{
- int i, e, err = 0;
+ int i, err = 0;
- for (i = 0; i < nr_bhs; i++) {
- lock_buffer(bhs[i]);
- if (test_clear_buffer_dirty(bhs[i])) {
- get_bh(bhs[i]);
- bhs[i]->b_end_io = end_buffer_write_sync;
- e = submit_bh(WRITE, bhs[i]);
- if (!err && e)
- err = e;
- } else
- unlock_buffer(bhs[i]);
- }
+ ll_rw_block(SWRITE, nr_bhs, bhs);
for (i = 0; i < nr_bhs; i++) {
wait_on_buffer(bhs[i]);
if (buffer_eopnotsupp(bhs[i])) {
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 5f96786..dc4a700 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -208,8 +208,11 @@
struct inode * inode = filp->f_dentry->d_inode;
int error = 0;
- /* O_APPEND cannot be cleared if the file is marked as append-only */
- if (!(arg & O_APPEND) && IS_APPEND(inode))
+ /*
+ * O_APPEND cannot be cleared if the file is marked as append-only
+ * and the file is open for write.
+ */
+ if (((arg ^ filp->f_flags) & O_APPEND) && IS_APPEND(inode))
return -EPERM;
/* O_NOATIME can only be set by the owner or superuser */
diff --git a/fs/file.c b/fs/file.c
index fd066b2..cea7cbe 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -379,7 +379,6 @@
void __init files_defer_init(void)
{
int i;
- /* Really early - can't use for_each_cpu */
- for (i = 0; i < NR_CPUS; i++)
+ for_each_cpu(i)
fdtable_defer_list_init(i);
}
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 4526da8..f556a0d 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -120,9 +120,9 @@
return do_get_request(fc);
}
+/* Must be called with fuse_lock held */
static void fuse_putback_request(struct fuse_conn *fc, struct fuse_req *req)
{
- spin_lock(&fuse_lock);
if (req->preallocated) {
atomic_dec(&fc->num_waiting);
list_add(&req->list, &fc->unused_list);
@@ -134,11 +134,19 @@
fc->outstanding_debt--;
else
up(&fc->outstanding_sem);
- spin_unlock(&fuse_lock);
}
void fuse_put_request(struct fuse_conn *fc, struct fuse_req *req)
{
+ if (atomic_dec_and_test(&req->count)) {
+ spin_lock(&fuse_lock);
+ fuse_putback_request(fc, req);
+ spin_unlock(&fuse_lock);
+ }
+}
+
+static void fuse_put_request_locked(struct fuse_conn *fc, struct fuse_req *req)
+{
if (atomic_dec_and_test(&req->count))
fuse_putback_request(fc, req);
}
@@ -163,26 +171,36 @@
* still waiting), the 'end' callback is called if given, else the
* reference to the request is released
*
+ * Releasing extra reference for foreground requests must be done
+ * within the same locked region as setting state to finished. This
+ * is because fuse_reset_request() may be called after request is
+ * finished and it must be the sole possessor. If request is
+ * interrupted and put in the background, it will return with an error
+ * and hence never be reset and reused.
+ *
* Called with fuse_lock, unlocks it
*/
static void request_end(struct fuse_conn *fc, struct fuse_req *req)
{
- void (*end) (struct fuse_conn *, struct fuse_req *) = req->end;
- req->end = NULL;
list_del(&req->list);
req->state = FUSE_REQ_FINISHED;
- spin_unlock(&fuse_lock);
- if (req->background) {
+ if (!req->background) {
+ wake_up(&req->waitq);
+ fuse_put_request_locked(fc, req);
+ spin_unlock(&fuse_lock);
+ } else {
+ void (*end) (struct fuse_conn *, struct fuse_req *) = req->end;
+ req->end = NULL;
+ spin_unlock(&fuse_lock);
down_read(&fc->sbput_sem);
if (fc->mounted)
fuse_release_background(req);
up_read(&fc->sbput_sem);
+ if (end)
+ end(fc, req);
+ else
+ fuse_put_request(fc, req);
}
- wake_up(&req->waitq);
- if (end)
- end(fc, req);
- else
- fuse_put_request(fc, req);
}
/*
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index a7ef5e7..2963516 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -335,9 +335,14 @@
loff_t pos = page_offset(req->pages[0]);
size_t count = req->num_pages << PAGE_CACHE_SHIFT;
req->out.page_zeroing = 1;
- req->end = fuse_readpages_end;
fuse_read_fill(req, file, inode, pos, count, FUSE_READ);
- request_send_background(fc, req);
+ if (fc->async_read) {
+ req->end = fuse_readpages_end;
+ request_send_background(fc, req);
+ } else {
+ request_send(fc, req);
+ fuse_readpages_end(fc, req);
+ }
}
struct fuse_readpages_data {
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 46cf933..4a83adf 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -272,6 +272,9 @@
reply, before any other request, and never cleared */
unsigned conn_error : 1;
+ /** Do readpages asynchronously? Only set in INIT */
+ unsigned async_read : 1;
+
/*
* The following bitfields are only for optimization purposes
* and hence races in setting them will not cause malfunction
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index c755a04..879e6fb 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -473,6 +473,16 @@
if (req->out.h.error || arg->major != FUSE_KERNEL_VERSION)
fc->conn_error = 1;
else {
+ unsigned long ra_pages;
+
+ if (arg->minor >= 6) {
+ ra_pages = arg->max_readahead / PAGE_CACHE_SIZE;
+ if (arg->flags & FUSE_ASYNC_READ)
+ fc->async_read = 1;
+ } else
+ ra_pages = fc->max_read / PAGE_CACHE_SIZE;
+
+ fc->bdi.ra_pages = min(fc->bdi.ra_pages, ra_pages);
fc->minor = arg->minor;
fc->max_write = arg->minor < 5 ? 4096 : arg->max_write;
}
@@ -496,6 +506,8 @@
arg->major = FUSE_KERNEL_VERSION;
arg->minor = FUSE_KERNEL_MINOR_VERSION;
+ arg->max_readahead = fc->bdi.ra_pages * PAGE_CACHE_SIZE;
+ arg->flags |= FUSE_ASYNC_READ;
req->in.h.opcode = FUSE_INIT;
req->in.numargs = 1;
req->in.args[0].size = sizeof(*arg);
@@ -552,8 +564,6 @@
fc->user_id = d.user_id;
fc->group_id = d.group_id;
fc->max_read = d.max_read;
- if (fc->max_read / PAGE_CACHE_SIZE < fc->bdi.ra_pages)
- fc->bdi.ra_pages = fc->max_read / PAGE_CACHE_SIZE;
/* Used by get_root_inode() */
sb->s_fs_info = fc;
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index f568102..b351952899 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -72,8 +72,8 @@
unsigned long start = vma->vm_start;
unsigned long end = vma->vm_end;
unsigned long hugepages = (end - start) >> HPAGE_SHIFT;
- pgoff_t next = vma->vm_pgoff;
- pgoff_t endpg = next + ((end - start) >> PAGE_SHIFT);
+ pgoff_t next = vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT);
+ pgoff_t endpg = next + hugepages;
pagevec_init(&pvec, 0);
while (next < endpg) {
diff --git a/fs/inode.c b/fs/inode.c
index 108138d..d0be615 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1179,7 +1179,7 @@
/**
* touch_atime - update the access time
* @mnt: mount the inode is accessed on
- * @inode: inode accessed
+ * @dentry: dentry accessed
*
* Update the accessed time on an inode and mark it for writeback.
* This function automatically handles read only file systems and media,
diff --git a/fs/inotify.c b/fs/inotify.c
index 878ccca..3041503 100644
--- a/fs/inotify.c
+++ b/fs/inotify.c
@@ -967,7 +967,7 @@
mask_add = 1;
/* don't let user-space set invalid bits: we don't want flags set */
- mask &= IN_ALL_EVENTS;
+ mask &= IN_ALL_EVENTS | IN_ONESHOT;
if (unlikely(!mask)) {
ret = -EINVAL;
goto out;
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 429f4b2..ca91797 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -1308,6 +1308,7 @@
transaction_t *transaction = handle->h_transaction;
journal_t *journal = transaction->t_journal;
int old_handle_count, err;
+ pid_t pid;
J_ASSERT(transaction->t_updates > 0);
J_ASSERT(journal_current_handle() == handle);
@@ -1333,8 +1334,15 @@
* It doesn't cost much - we're about to run a commit and sleep
* on IO anyway. Speeds up many-threaded, many-dir operations
* by 30x or more...
+ *
+ * But don't do this if this process was the most recent one to
+ * perform a synchronous write. We do this to detect the case where a
+ * single process is doing a stream of sync writes. No point in waiting
+ * for joiners in that case.
*/
- if (handle->h_sync) {
+ pid = current->pid;
+ if (handle->h_sync && journal->j_last_sync_writer != pid) {
+ journal->j_last_sync_writer = pid;
do {
old_handle_count = transaction->t_handle_count;
schedule_timeout_uninterruptible(1);
diff --git a/fs/jffs/intrep.c b/fs/jffs/intrep.c
index b2e9542..ce7b54b 100644
--- a/fs/jffs/intrep.c
+++ b/fs/jffs/intrep.c
@@ -1965,7 +1965,7 @@
iovec_cnt++;
if (JFFS_GET_PAD_BYTES(raw_inode->nsize)) {
- static char allff[3]={255,255,255};
+ static unsigned char allff[3]={255,255,255};
/* Add some extra padding if necessary */
node_iovec[iovec_cnt].iov_base = allff;
node_iovec[iovec_cnt].iov_len =
diff --git a/fs/libfs.c b/fs/libfs.c
index 63c020e..71fd08f 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -388,6 +388,7 @@
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
inode->i_op = &simple_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
+ inode->i_nlink = 2;
root = d_alloc_root(inode);
if (!root) {
iput(inode);
diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c
index 1455240..220058d 100644
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -22,12 +22,14 @@
#define NLMDBG_FACILITY NLMDBG_CLIENT
#define NLMCLNT_GRACE_WAIT (5*HZ)
#define NLMCLNT_POLL_TIMEOUT (30*HZ)
+#define NLMCLNT_MAX_RETRIES 3
static int nlmclnt_test(struct nlm_rqst *, struct file_lock *);
static int nlmclnt_lock(struct nlm_rqst *, struct file_lock *);
static int nlmclnt_unlock(struct nlm_rqst *, struct file_lock *);
static int nlm_stat_to_errno(u32 stat);
static void nlmclnt_locks_init_private(struct file_lock *fl, struct nlm_host *host);
+static int nlmclnt_cancel(struct nlm_host *, int , struct file_lock *);
static const struct rpc_call_ops nlmclnt_unlock_ops;
static const struct rpc_call_ops nlmclnt_cancel_ops;
@@ -598,7 +600,7 @@
nlmclnt_finish_block(req);
/* Cancel the blocked request if it is still pending */
if (resp->status == NLM_LCK_BLOCKED)
- nlmclnt_cancel(host, fl);
+ nlmclnt_cancel(host, req->a_args.block, fl);
out:
nlmclnt_release_lockargs(req);
return status;
@@ -728,8 +730,7 @@
* We always use an async RPC call for this in order not to hang a
* process that has been Ctrl-C'ed.
*/
-int
-nlmclnt_cancel(struct nlm_host *host, struct file_lock *fl)
+static int nlmclnt_cancel(struct nlm_host *host, int block, struct file_lock *fl)
{
struct nlm_rqst *req;
unsigned long flags;
@@ -750,6 +751,7 @@
req->a_flags = RPC_TASK_ASYNC;
nlmclnt_setlockargs(req, fl);
+ req->a_args.block = block;
status = nlmclnt_async_call(req, NLMPROC_CANCEL, &nlmclnt_cancel_ops);
if (status < 0) {
@@ -801,6 +803,9 @@
return;
retry_cancel:
+ /* Don't ever retry more than 3 times */
+ if (req->a_retries++ >= NLMCLNT_MAX_RETRIES)
+ goto die;
nlm_rebind_host(req->a_host);
rpc_restart_call(task);
rpc_delay(task, 30 * HZ);
diff --git a/fs/namei.c b/fs/namei.c
index 4acdac0..e28de84 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -790,7 +790,7 @@
inode = nd->dentry->d_inode;
if (nd->depth)
- lookup_flags = LOOKUP_FOLLOW;
+ lookup_flags = LOOKUP_FOLLOW | (nd->flags & LOOKUP_CONTINUE);
/* At this point we know we have a real path component. */
for(;;) {
@@ -885,7 +885,8 @@
last_with_slashes:
lookup_flags |= LOOKUP_FOLLOW | LOOKUP_DIRECTORY;
last_component:
- nd->flags &= ~LOOKUP_CONTINUE;
+ /* Clear LOOKUP_CONTINUE iff it was previously unset */
+ nd->flags &= lookup_flags | ~LOOKUP_CONTINUE;
if (lookup_flags & LOOKUP_PARENT)
goto lookup_parent;
if (this.name[0] == '.') switch (this.len) {
@@ -1069,6 +1070,8 @@
unsigned int flags, struct nameidata *nd)
{
int retval = 0;
+ int fput_needed;
+ struct file *file;
nd->last_type = LAST_ROOT; /* if there are only slashes... */
nd->flags = flags;
@@ -1090,29 +1093,22 @@
nd->mnt = mntget(current->fs->pwdmnt);
nd->dentry = dget(current->fs->pwd);
} else {
- struct file *file;
- int fput_needed;
struct dentry *dentry;
file = fget_light(dfd, &fput_needed);
- if (!file) {
- retval = -EBADF;
- goto out_fail;
- }
+ retval = -EBADF;
+ if (!file)
+ goto unlock_fail;
dentry = file->f_dentry;
- if (!S_ISDIR(dentry->d_inode->i_mode)) {
- retval = -ENOTDIR;
- fput_light(file, fput_needed);
- goto out_fail;
- }
+ retval = -ENOTDIR;
+ if (!S_ISDIR(dentry->d_inode->i_mode))
+ goto fput_unlock_fail;
retval = file_permission(file, MAY_EXEC);
- if (retval) {
- fput_light(file, fput_needed);
- goto out_fail;
- }
+ if (retval)
+ goto fput_unlock_fail;
nd->mnt = mntget(file->f_vfsmnt);
nd->dentry = dget(dentry);
@@ -1123,10 +1119,17 @@
current->total_link_count = 0;
retval = link_path_walk(name, nd);
out:
- if (unlikely(current->audit_context
- && nd && nd->dentry && nd->dentry->d_inode))
+ if (likely(retval == 0)) {
+ if (unlikely(current->audit_context && nd && nd->dentry &&
+ nd->dentry->d_inode))
audit_inode(name, nd->dentry->d_inode, flags);
-out_fail:
+ }
+ return retval;
+
+fput_unlock_fail:
+ fput_light(file, fput_needed);
+unlock_fail:
+ read_unlock(¤t->fs->lock);
return retval;
}
@@ -1161,6 +1164,7 @@
/**
* path_lookup_open - lookup a file path with open intent
+ * @dfd: the directory to use as base, or AT_FDCWD
* @name: pointer to file name
* @lookup_flags: lookup intent flags
* @nd: pointer to nameidata
@@ -1175,6 +1179,7 @@
/**
* path_lookup_create - lookup a file path with open + create intent
+ * @dfd: the directory to use as base, or AT_FDCWD
* @name: pointer to file name
* @lookup_flags: lookup intent flags
* @nd: pointer to nameidata
diff --git a/fs/namespace.c b/fs/namespace.c
index ce97bec..058a448 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -494,7 +494,7 @@
p->mnt_namespace = NULL;
list_del_init(&p->mnt_child);
if (p->mnt_parent != p)
- mnt->mnt_mountpoint->d_mounted--;
+ p->mnt_mountpoint->d_mounted--;
change_mnt_propagation(p, MS_PRIVATE);
}
}
@@ -1325,27 +1325,17 @@
return retval;
}
-int copy_namespace(int flags, struct task_struct *tsk)
+/*
+ * Allocate a new namespace structure and populate it with contents
+ * copied from the namespace of the passed in task structure.
+ */
+struct namespace *dup_namespace(struct task_struct *tsk, struct fs_struct *fs)
{
struct namespace *namespace = tsk->namespace;
struct namespace *new_ns;
struct vfsmount *rootmnt = NULL, *pwdmnt = NULL, *altrootmnt = NULL;
- struct fs_struct *fs = tsk->fs;
struct vfsmount *p, *q;
- if (!namespace)
- return 0;
-
- get_namespace(namespace);
-
- if (!(flags & CLONE_NEWNS))
- return 0;
-
- if (!capable(CAP_SYS_ADMIN)) {
- put_namespace(namespace);
- return -EPERM;
- }
-
new_ns = kmalloc(sizeof(struct namespace), GFP_KERNEL);
if (!new_ns)
goto out;
@@ -1396,8 +1386,6 @@
}
up_write(&namespace_sem);
- tsk->namespace = new_ns;
-
if (rootmnt)
mntput(rootmnt);
if (pwdmnt)
@@ -1405,12 +1393,40 @@
if (altrootmnt)
mntput(altrootmnt);
- put_namespace(namespace);
- return 0;
+out:
+ return new_ns;
+}
+
+int copy_namespace(int flags, struct task_struct *tsk)
+{
+ struct namespace *namespace = tsk->namespace;
+ struct namespace *new_ns;
+ int err = 0;
+
+ if (!namespace)
+ return 0;
+
+ get_namespace(namespace);
+
+ if (!(flags & CLONE_NEWNS))
+ return 0;
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ err = -EPERM;
+ goto out;
+ }
+
+ new_ns = dup_namespace(tsk, tsk->fs);
+ if (!new_ns) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ tsk->namespace = new_ns;
out:
put_namespace(namespace);
- return -ENOMEM;
+ return err;
}
asmlinkage long sys_mount(char __user * dev_name, char __user * dir_name,
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 10ae377..04ab2fc 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -481,7 +481,7 @@
if (wdata->verf.committed != NFS_FILE_SYNC) {
need_commit = 1;
if (memcmp(&first_verf.verifier, &wdata->verf.verifier,
- sizeof(first_verf.verifier)));
+ sizeof(first_verf.verifier)))
goto sync_retry;
}
diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c
index e897e00..c0a754e 100644
--- a/fs/nfs/nfsroot.c
+++ b/fs/nfs/nfsroot.c
@@ -465,10 +465,11 @@
"number from server, using default\n");
port = nfsd_port;
}
- nfs_port = htons(port);
+ nfs_port = port;
dprintk("Root-NFS: Portmapper on server returned %d "
"as nfsd port\n", port);
}
+ nfs_port = htons(nfs_port);
if ((port = root_nfs_getport(NFS_MNT_PROGRAM, mountd_ver, proto)) < 0) {
printk(KERN_ERR "Root-NFS: Unable to get mountd port "
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index a00fe86..6d63f1d 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -195,10 +195,12 @@
/* Openowner is now set, so sequence id will get bumped. Now we need
* these checks before we do any creates: */
+ status = nfserr_grace;
if (nfs4_in_grace() && open->op_claim_type != NFS4_OPEN_CLAIM_PREVIOUS)
- return nfserr_grace;
+ goto out;
+ status = nfserr_no_grace;
if (!nfs4_in_grace() && open->op_claim_type == NFS4_OPEN_CLAIM_PREVIOUS)
- return nfserr_no_grace;
+ goto out;
switch (open->op_claim_type) {
case NFS4_OPEN_CLAIM_DELEGATE_CUR:
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index 89ed046..1d163b6 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -64,6 +64,32 @@
};
static struct list_head nfsd_list = LIST_HEAD_INIT(nfsd_list);
+#if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL)
+static struct svc_stat nfsd_acl_svcstats;
+static struct svc_version * nfsd_acl_version[] = {
+ [2] = &nfsd_acl_version2,
+ [3] = &nfsd_acl_version3,
+};
+
+#define NFSD_ACL_MINVERS 2
+#define NFSD_ACL_NRVERS (sizeof(nfsd_acl_version)/sizeof(nfsd_acl_version[0]))
+static struct svc_version *nfsd_acl_versions[NFSD_ACL_NRVERS];
+
+static struct svc_program nfsd_acl_program = {
+ .pg_prog = NFS_ACL_PROGRAM,
+ .pg_nvers = NFSD_ACL_NRVERS,
+ .pg_vers = nfsd_acl_versions,
+ .pg_name = "nfsd",
+ .pg_class = "nfsd",
+ .pg_stats = &nfsd_acl_svcstats,
+ .pg_authenticate = &svc_set_client,
+};
+
+static struct svc_stat nfsd_acl_svcstats = {
+ .program = &nfsd_acl_program,
+};
+#endif /* defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL) */
+
static struct svc_version * nfsd_version[] = {
[2] = &nfsd_version2,
#if defined(CONFIG_NFSD_V3)
@@ -79,6 +105,9 @@
static struct svc_version *nfsd_versions[NFSD_NRVERS];
struct svc_program nfsd_program = {
+#if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL)
+ .pg_next = &nfsd_acl_program,
+#endif
.pg_prog = NFS_PROGRAM, /* program number */
.pg_nvers = NFSD_NRVERS, /* nr of entries in nfsd_version */
.pg_vers = nfsd_versions, /* version table */
@@ -147,6 +176,26 @@
nfsd_program.pg_vers[i] = nfsd_version[i];
}
+
+#if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL)
+ found_one = 0;
+
+ for (i = NFSD_ACL_MINVERS; i < NFSD_ACL_NRVERS; i++) {
+ if (NFSCTL_VERISSET(nfsd_versbits, i)) {
+ nfsd_acl_program.pg_vers[i] =
+ nfsd_acl_version[i];
+ found_one = 1;
+ } else
+ nfsd_acl_program.pg_vers[i] = NULL;
+ }
+
+ if (!found_one) {
+ for (i = NFSD_ACL_MINVERS; i < NFSD_ACL_NRVERS; i++)
+ nfsd_acl_program.pg_vers[i] =
+ nfsd_acl_version[i];
+ }
+#endif
+
atomic_set(&nfsd_busy, 0);
error = -ENOMEM;
nfsd_serv = svc_create(&nfsd_program, NFSD_BUFSIZE);
@@ -411,30 +460,3 @@
nfsd_cache_update(rqstp, proc->pc_cachetype, statp + 1);
return 1;
}
-
-#if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL)
-static struct svc_stat nfsd_acl_svcstats;
-static struct svc_version * nfsd_acl_version[] = {
- [2] = &nfsd_acl_version2,
- [3] = &nfsd_acl_version3,
-};
-
-#define NFSD_ACL_NRVERS (sizeof(nfsd_acl_version)/sizeof(nfsd_acl_version[0]))
-static struct svc_program nfsd_acl_program = {
- .pg_prog = NFS_ACL_PROGRAM,
- .pg_nvers = NFSD_ACL_NRVERS,
- .pg_vers = nfsd_acl_version,
- .pg_name = "nfsd",
- .pg_class = "nfsd",
- .pg_stats = &nfsd_acl_svcstats,
- .pg_authenticate = &svc_set_client,
-};
-
-static struct svc_stat nfsd_acl_svcstats = {
- .program = &nfsd_acl_program,
-};
-
-#define nfsd_acl_program_p &nfsd_acl_program
-#else
-#define nfsd_acl_program_p NULL
-#endif /* defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL) */
diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c
index d424041..bae3d75 100644
--- a/fs/ocfs2/buffer_head_io.c
+++ b/fs/ocfs2/buffer_head_io.c
@@ -58,7 +58,7 @@
goto out;
}
- down(&OCFS2_I(inode)->ip_io_sem);
+ mutex_lock(&OCFS2_I(inode)->ip_io_mutex);
lock_buffer(bh);
set_buffer_uptodate(bh);
@@ -82,7 +82,7 @@
brelse(bh);
}
- up(&OCFS2_I(inode)->ip_io_sem);
+ mutex_unlock(&OCFS2_I(inode)->ip_io_mutex);
out:
mlog_exit(ret);
return ret;
@@ -125,13 +125,13 @@
flags &= ~OCFS2_BH_CACHED;
if (inode)
- down(&OCFS2_I(inode)->ip_io_sem);
+ mutex_lock(&OCFS2_I(inode)->ip_io_mutex);
for (i = 0 ; i < nr ; i++) {
if (bhs[i] == NULL) {
bhs[i] = sb_getblk(sb, block++);
if (bhs[i] == NULL) {
if (inode)
- up(&OCFS2_I(inode)->ip_io_sem);
+ mutex_unlock(&OCFS2_I(inode)->ip_io_mutex);
status = -EIO;
mlog_errno(status);
goto bail;
@@ -220,7 +220,7 @@
ocfs2_set_buffer_uptodate(inode, bh);
}
if (inode)
- up(&OCFS2_I(inode)->ip_io_sem);
+ mutex_unlock(&OCFS2_I(inode)->ip_io_mutex);
mlog(ML_BH_IO, "block=(%"MLFu64"), nr=(%d), cached=%s\n", block, nr,
(!(flags & OCFS2_BH_CACHED) || ignore_cache) ? "no" : "yes");
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index 7307ba5..d08971d 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -917,8 +917,9 @@
elapsed_msec = o2hb_elapsed_msecs(&before_hb, &after_hb);
mlog(0, "start = %lu.%lu, end = %lu.%lu, msec = %u\n",
- before_hb.tv_sec, before_hb.tv_usec,
- after_hb.tv_sec, after_hb.tv_usec, elapsed_msec);
+ before_hb.tv_sec, (unsigned long) before_hb.tv_usec,
+ after_hb.tv_sec, (unsigned long) after_hb.tv_usec,
+ elapsed_msec);
if (elapsed_msec < reg->hr_timeout_ms) {
/* the kthread api has blocked signals for us so no
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index 35d92c0..d22d4cf 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -1285,14 +1285,16 @@
mlog(ML_NOTICE, "here are some times that might help debug the "
"situation: (tmr %ld.%ld now %ld.%ld dr %ld.%ld adv "
"%ld.%ld:%ld.%ld func (%08x:%u) %ld.%ld:%ld.%ld)\n",
- sc->sc_tv_timer.tv_sec, sc->sc_tv_timer.tv_usec,
- now.tv_sec, now.tv_usec,
- sc->sc_tv_data_ready.tv_sec, sc->sc_tv_data_ready.tv_usec,
- sc->sc_tv_advance_start.tv_sec, sc->sc_tv_advance_start.tv_usec,
- sc->sc_tv_advance_stop.tv_sec, sc->sc_tv_advance_stop.tv_usec,
+ sc->sc_tv_timer.tv_sec, (long) sc->sc_tv_timer.tv_usec,
+ now.tv_sec, (long) now.tv_usec,
+ sc->sc_tv_data_ready.tv_sec, (long) sc->sc_tv_data_ready.tv_usec,
+ sc->sc_tv_advance_start.tv_sec,
+ (long) sc->sc_tv_advance_start.tv_usec,
+ sc->sc_tv_advance_stop.tv_sec,
+ (long) sc->sc_tv_advance_stop.tv_usec,
sc->sc_msg_key, sc->sc_msg_type,
- sc->sc_tv_func_start.tv_sec, sc->sc_tv_func_start.tv_usec,
- sc->sc_tv_func_stop.tv_sec, sc->sc_tv_func_stop.tv_usec);
+ sc->sc_tv_func_start.tv_sec, (long) sc->sc_tv_func_start.tv_usec,
+ sc->sc_tv_func_stop.tv_sec, (long) sc->sc_tv_func_stop.tv_usec);
o2net_sc_queue_work(sc, &sc->sc_shutdown_work);
}
diff --git a/fs/ocfs2/dlm/dlmcommon.h b/fs/ocfs2/dlm/dlmcommon.h
index 3fecba0..42eb53b 100644
--- a/fs/ocfs2/dlm/dlmcommon.h
+++ b/fs/ocfs2/dlm/dlmcommon.h
@@ -657,6 +657,7 @@
int dlm_launch_recovery_thread(struct dlm_ctxt *dlm);
void dlm_complete_recovery_thread(struct dlm_ctxt *dlm);
void dlm_wait_for_recovery(struct dlm_ctxt *dlm);
+int dlm_is_node_dead(struct dlm_ctxt *dlm, u8 node);
void dlm_put(struct dlm_ctxt *dlm);
struct dlm_ctxt *dlm_grab(struct dlm_ctxt *dlm);
diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c
index da3c220..6ee3083 100644
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -573,8 +573,11 @@
spin_lock(&dlm_domain_lock);
dlm = __dlm_lookup_domain_full(query->domain, query->name_len);
/* Once the dlm ctxt is marked as leaving then we don't want
- * to be put in someone's domain map. */
+ * to be put in someone's domain map.
+ * Also, explicitly disallow joining at certain troublesome
+ * times (ie. during recovery). */
if (dlm && dlm->dlm_state != DLM_CTXT_LEAVING) {
+ int bit = query->node_idx;
spin_lock(&dlm->spinlock);
if (dlm->dlm_state == DLM_CTXT_NEW &&
@@ -586,6 +589,19 @@
} else if (dlm->joining_node != DLM_LOCK_RES_OWNER_UNKNOWN) {
/* Disallow parallel joins. */
response = JOIN_DISALLOW;
+ } else if (dlm->reco.state & DLM_RECO_STATE_ACTIVE) {
+ mlog(ML_NOTICE, "node %u trying to join, but recovery "
+ "is ongoing.\n", bit);
+ response = JOIN_DISALLOW;
+ } else if (test_bit(bit, dlm->recovery_map)) {
+ mlog(ML_NOTICE, "node %u trying to join, but it "
+ "still needs recovery.\n", bit);
+ response = JOIN_DISALLOW;
+ } else if (test_bit(bit, dlm->domain_map)) {
+ mlog(ML_NOTICE, "node %u trying to join, but it "
+ "is still in the domain! needs recovery?\n",
+ bit);
+ response = JOIN_DISALLOW;
} else {
/* Alright we're fully a part of this domain
* so we keep some state as to who's joining
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 27e984f..a3194fe 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -1050,17 +1050,10 @@
node = dlm_bitmap_diff_iter_next(&bdi, &sc);
while (node >= 0) {
if (sc == NODE_UP) {
- /* a node came up. easy. might not even need
- * to talk to it if its node number is higher
- * or if we are already blocked. */
- mlog(0, "node up! %d\n", node);
- if (blocked)
- goto next;
-
- if (node > dlm->node_num) {
- mlog(0, "node > this node. skipping.\n");
- goto next;
- }
+ /* a node came up. clear any old vote from
+ * the response map and set it in the vote map
+ * then restart the mastery. */
+ mlog(ML_NOTICE, "node %d up while restarting\n", node);
/* redo the master request, but only for the new node */
mlog(0, "sending request to new node\n");
@@ -2005,6 +1998,15 @@
break;
mlog(0, "timed out during migration\n");
+ /* avoid hang during shutdown when migrating lockres
+ * to a node which also goes down */
+ if (dlm_is_node_dead(dlm, target)) {
+ mlog(0, "%s:%.*s: expected migration target %u "
+ "is no longer up. restarting.\n",
+ dlm->name, res->lockname.len,
+ res->lockname.name, target);
+ ret = -ERESTARTSYS;
+ }
}
if (ret == -ERESTARTSYS) {
/* migration failed, detach and clean up mle */
diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c
index 0c8eb10..186e9a7 100644
--- a/fs/ocfs2/dlm/dlmrecovery.c
+++ b/fs/ocfs2/dlm/dlmrecovery.c
@@ -39,6 +39,7 @@
#include <linux/inet.h>
#include <linux/timer.h>
#include <linux/kthread.h>
+#include <linux/delay.h>
#include "cluster/heartbeat.h"
@@ -256,6 +257,27 @@
return 0;
}
+/* returns true when the recovery master has contacted us */
+static int dlm_reco_master_ready(struct dlm_ctxt *dlm)
+{
+ int ready;
+ spin_lock(&dlm->spinlock);
+ ready = (dlm->reco.new_master != O2NM_INVALID_NODE_NUM);
+ spin_unlock(&dlm->spinlock);
+ return ready;
+}
+
+/* returns true if node is no longer in the domain
+ * could be dead or just not joined */
+int dlm_is_node_dead(struct dlm_ctxt *dlm, u8 node)
+{
+ int dead;
+ spin_lock(&dlm->spinlock);
+ dead = test_bit(node, dlm->domain_map);
+ spin_unlock(&dlm->spinlock);
+ return dead;
+}
+
/* callers of the top-level api calls (dlmlock/dlmunlock) should
* block on the dlm->reco.event when recovery is in progress.
* the dlm recovery thread will set this state when it begins
@@ -297,6 +319,7 @@
static int dlm_do_recovery(struct dlm_ctxt *dlm)
{
int status = 0;
+ int ret;
spin_lock(&dlm->spinlock);
@@ -343,10 +366,13 @@
goto master_here;
if (dlm->reco.new_master == O2NM_INVALID_NODE_NUM) {
- /* choose a new master */
- if (!dlm_pick_recovery_master(dlm)) {
+ /* choose a new master, returns 0 if this node
+ * is the master, -EEXIST if it's another node.
+ * this does not return until a new master is chosen
+ * or recovery completes entirely. */
+ ret = dlm_pick_recovery_master(dlm);
+ if (!ret) {
/* already notified everyone. go. */
- dlm->reco.new_master = dlm->node_num;
goto master_here;
}
mlog(0, "another node will master this recovery session.\n");
@@ -371,8 +397,13 @@
if (status < 0) {
mlog(ML_ERROR, "error %d remastering locks for node %u, "
"retrying.\n", status, dlm->reco.dead_node);
+ /* yield a bit to allow any final network messages
+ * to get handled on remaining nodes */
+ msleep(100);
} else {
/* success! see if any other nodes need recovery */
+ mlog(0, "DONE mastering recovery of %s:%u here(this=%u)!\n",
+ dlm->name, dlm->reco.dead_node, dlm->node_num);
dlm_reset_recovery(dlm);
}
dlm_end_recovery(dlm);
@@ -477,7 +508,7 @@
BUG();
break;
case DLM_RECO_NODE_DATA_DEAD:
- mlog(0, "node %u died after "
+ mlog(ML_NOTICE, "node %u died after "
"requesting recovery info for "
"node %u\n", ndata->node_num,
dead_node);
@@ -485,6 +516,19 @@
// start all over
destroy = 1;
status = -EAGAIN;
+ /* instead of spinning like crazy here,
+ * wait for the domain map to catch up
+ * with the network state. otherwise this
+ * can be hit hundreds of times before
+ * the node is really seen as dead. */
+ wait_event_timeout(dlm->dlm_reco_thread_wq,
+ dlm_is_node_dead(dlm,
+ ndata->node_num),
+ msecs_to_jiffies(1000));
+ mlog(0, "waited 1 sec for %u, "
+ "dead? %s\n", ndata->node_num,
+ dlm_is_node_dead(dlm, ndata->node_num) ?
+ "yes" : "no");
goto leave;
case DLM_RECO_NODE_DATA_RECEIVING:
case DLM_RECO_NODE_DATA_REQUESTED:
@@ -678,11 +722,27 @@
dlm = item->dlm;
dead_node = item->u.ral.dead_node;
reco_master = item->u.ral.reco_master;
+ mres = (struct dlm_migratable_lockres *)data;
+
+ if (dead_node != dlm->reco.dead_node ||
+ reco_master != dlm->reco.new_master) {
+ /* show extra debug info if the recovery state is messed */
+ mlog(ML_ERROR, "%s: bad reco state: reco(dead=%u, master=%u), "
+ "request(dead=%u, master=%u)\n",
+ dlm->name, dlm->reco.dead_node, dlm->reco.new_master,
+ dead_node, reco_master);
+ mlog(ML_ERROR, "%s: name=%.*s master=%u locks=%u/%u flags=%u "
+ "entry[0]={c=%"MLFu64",l=%u,f=%u,t=%d,ct=%d,hb=%d,n=%u}\n",
+ dlm->name, mres->lockname_len, mres->lockname, mres->master,
+ mres->num_locks, mres->total_locks, mres->flags,
+ mres->ml[0].cookie, mres->ml[0].list, mres->ml[0].flags,
+ mres->ml[0].type, mres->ml[0].convert_type,
+ mres->ml[0].highest_blocked, mres->ml[0].node);
+ BUG();
+ }
BUG_ON(dead_node != dlm->reco.dead_node);
BUG_ON(reco_master != dlm->reco.new_master);
- mres = (struct dlm_migratable_lockres *)data;
-
/* lock resources should have already been moved to the
* dlm->reco.resources list. now move items from that list
* to a temp list if the dead owner matches. note that the
@@ -757,15 +817,18 @@
continue;
switch (ndata->state) {
+ /* should have moved beyond INIT but not to FINALIZE yet */
case DLM_RECO_NODE_DATA_INIT:
case DLM_RECO_NODE_DATA_DEAD:
- case DLM_RECO_NODE_DATA_DONE:
case DLM_RECO_NODE_DATA_FINALIZE_SENT:
mlog(ML_ERROR, "bad ndata state for node %u:"
" state=%d\n", ndata->node_num,
ndata->state);
BUG();
break;
+ /* these states are possible at this point, anywhere along
+ * the line of recovery */
+ case DLM_RECO_NODE_DATA_DONE:
case DLM_RECO_NODE_DATA_RECEIVING:
case DLM_RECO_NODE_DATA_REQUESTED:
case DLM_RECO_NODE_DATA_REQUESTING:
@@ -799,13 +862,31 @@
{
struct dlm_lock_resource *res;
struct list_head *iter, *iter2;
+ struct dlm_lock *lock;
spin_lock(&dlm->spinlock);
list_for_each_safe(iter, iter2, &dlm->reco.resources) {
res = list_entry (iter, struct dlm_lock_resource, recovering);
+ /* always prune any $RECOVERY entries for dead nodes,
+ * otherwise hangs can occur during later recovery */
if (dlm_is_recovery_lock(res->lockname.name,
- res->lockname.len))
+ res->lockname.len)) {
+ spin_lock(&res->spinlock);
+ list_for_each_entry(lock, &res->granted, list) {
+ if (lock->ml.node == dead_node) {
+ mlog(0, "AHA! there was "
+ "a $RECOVERY lock for dead "
+ "node %u (%s)!\n",
+ dead_node, dlm->name);
+ list_del_init(&lock->list);
+ dlm_lock_put(lock);
+ break;
+ }
+ }
+ spin_unlock(&res->spinlock);
continue;
+ }
+
if (res->owner == dead_node) {
mlog(0, "found lockres owned by dead node while "
"doing recovery for node %u. sending it.\n",
@@ -1179,7 +1260,7 @@
again:
ret = dlm_lockres_master_requery(dlm, res, &real_master);
if (ret < 0) {
- mlog(0, "dlm_lockres_master_requery failure: %d\n",
+ mlog(0, "dlm_lockres_master_requery ret=%d\n",
ret);
goto again;
}
@@ -1757,6 +1838,7 @@
struct dlm_lock_resource *res;
int i;
struct list_head *bucket;
+ struct dlm_lock *lock;
/* purge any stale mles */
@@ -1780,10 +1862,25 @@
bucket = &(dlm->resources[i]);
list_for_each(iter, bucket) {
res = list_entry (iter, struct dlm_lock_resource, list);
+ /* always prune any $RECOVERY entries for dead nodes,
+ * otherwise hangs can occur during later recovery */
if (dlm_is_recovery_lock(res->lockname.name,
- res->lockname.len))
+ res->lockname.len)) {
+ spin_lock(&res->spinlock);
+ list_for_each_entry(lock, &res->granted, list) {
+ if (lock->ml.node == dead_node) {
+ mlog(0, "AHA! there was "
+ "a $RECOVERY lock for dead "
+ "node %u (%s)!\n",
+ dead_node, dlm->name);
+ list_del_init(&lock->list);
+ dlm_lock_put(lock);
+ break;
+ }
+ }
+ spin_unlock(&res->spinlock);
continue;
-
+ }
spin_lock(&res->spinlock);
/* zero the lvb if necessary */
dlm_revalidate_lvb(dlm, res, dead_node);
@@ -1869,12 +1966,9 @@
return;
spin_lock(&dlm->spinlock);
-
set_bit(idx, dlm->live_nodes_map);
-
- /* notify any mles attached to the heartbeat events */
- dlm_hb_event_notify_attached(dlm, idx, 1);
-
+ /* do NOT notify mle attached to the heartbeat events.
+ * new nodes are not interesting in mastery until joined. */
spin_unlock(&dlm->spinlock);
dlm_put(dlm);
@@ -1897,7 +1991,18 @@
mlog(0, "unlockast for recovery lock fired!\n");
}
-
+/*
+ * dlm_pick_recovery_master will continually attempt to use
+ * dlmlock() on the special "$RECOVERY" lockres with the
+ * LKM_NOQUEUE flag to get an EX. every thread that enters
+ * this function on each node racing to become the recovery
+ * master will not stop attempting this until either:
+ * a) this node gets the EX (and becomes the recovery master),
+ * or b) dlm->reco.new_master gets set to some nodenum
+ * != O2NM_INVALID_NODE_NUM (another node will do the reco).
+ * so each time a recovery master is needed, the entire cluster
+ * will sync at this point. if the new master dies, that will
+ * be detected in dlm_do_recovery */
static int dlm_pick_recovery_master(struct dlm_ctxt *dlm)
{
enum dlm_status ret;
@@ -1906,23 +2011,45 @@
mlog(0, "starting recovery of %s at %lu, dead=%u, this=%u\n",
dlm->name, jiffies, dlm->reco.dead_node, dlm->node_num);
-retry:
+again:
memset(&lksb, 0, sizeof(lksb));
ret = dlmlock(dlm, LKM_EXMODE, &lksb, LKM_NOQUEUE|LKM_RECOVERY,
DLM_RECOVERY_LOCK_NAME, dlm_reco_ast, dlm, dlm_reco_bast);
+ mlog(0, "%s: dlmlock($RECOVERY) returned %d, lksb=%d\n",
+ dlm->name, ret, lksb.status);
+
if (ret == DLM_NORMAL) {
mlog(0, "dlm=%s dlmlock says I got it (this=%u)\n",
dlm->name, dlm->node_num);
- /* I am master, send message to all nodes saying
- * that I am beginning a recovery session */
- status = dlm_send_begin_reco_message(dlm,
- dlm->reco.dead_node);
+
+ /* got the EX lock. check to see if another node
+ * just became the reco master */
+ if (dlm_reco_master_ready(dlm)) {
+ mlog(0, "%s: got reco EX lock, but %u will "
+ "do the recovery\n", dlm->name,
+ dlm->reco.new_master);
+ status = -EEXIST;
+ } else {
+ status = dlm_send_begin_reco_message(dlm,
+ dlm->reco.dead_node);
+ /* this always succeeds */
+ BUG_ON(status);
+
+ /* set the new_master to this node */
+ spin_lock(&dlm->spinlock);
+ dlm->reco.new_master = dlm->node_num;
+ spin_unlock(&dlm->spinlock);
+ }
/* recovery lock is a special case. ast will not get fired,
* so just go ahead and unlock it. */
ret = dlmunlock(dlm, &lksb, 0, dlm_reco_unlock_ast, dlm);
+ if (ret == DLM_DENIED) {
+ mlog(0, "got DLM_DENIED, trying LKM_CANCEL\n");
+ ret = dlmunlock(dlm, &lksb, LKM_CANCEL, dlm_reco_unlock_ast, dlm);
+ }
if (ret != DLM_NORMAL) {
/* this would really suck. this could only happen
* if there was a network error during the unlock
@@ -1930,20 +2057,42 @@
* is actually "done" and the lock structure is
* even freed. we can continue, but only
* because this specific lock name is special. */
- mlog(0, "dlmunlock returned %d\n", ret);
- }
-
- if (status < 0) {
- mlog(0, "failed to send recovery message. "
- "must retry with new node map.\n");
- goto retry;
+ mlog(ML_ERROR, "dlmunlock returned %d\n", ret);
}
} else if (ret == DLM_NOTQUEUED) {
mlog(0, "dlm=%s dlmlock says another node got it (this=%u)\n",
dlm->name, dlm->node_num);
/* another node is master. wait on
- * reco.new_master != O2NM_INVALID_NODE_NUM */
+ * reco.new_master != O2NM_INVALID_NODE_NUM
+ * for at most one second */
+ wait_event_timeout(dlm->dlm_reco_thread_wq,
+ dlm_reco_master_ready(dlm),
+ msecs_to_jiffies(1000));
+ if (!dlm_reco_master_ready(dlm)) {
+ mlog(0, "%s: reco master taking awhile\n",
+ dlm->name);
+ goto again;
+ }
+ /* another node has informed this one that it is reco master */
+ mlog(0, "%s: reco master %u is ready to recover %u\n",
+ dlm->name, dlm->reco.new_master, dlm->reco.dead_node);
status = -EEXIST;
+ } else {
+ struct dlm_lock_resource *res;
+
+ /* dlmlock returned something other than NOTQUEUED or NORMAL */
+ mlog(ML_ERROR, "%s: got %s from dlmlock($RECOVERY), "
+ "lksb.status=%s\n", dlm->name, dlm_errname(ret),
+ dlm_errname(lksb.status));
+ res = dlm_lookup_lockres(dlm, DLM_RECOVERY_LOCK_NAME,
+ DLM_RECOVERY_LOCK_NAME_LEN);
+ if (res) {
+ dlm_print_one_lock_resource(res);
+ dlm_lockres_put(res);
+ } else {
+ mlog(ML_ERROR, "recovery lock not found\n");
+ }
+ BUG();
}
return status;
@@ -1982,7 +2131,7 @@
mlog(0, "not sending begin reco to self\n");
continue;
}
-
+retry:
ret = -EINVAL;
mlog(0, "attempting to send begin reco msg to %d\n",
nodenum);
@@ -1991,8 +2140,17 @@
/* negative status is handled ok by caller here */
if (ret >= 0)
ret = status;
+ if (dlm_is_host_down(ret)) {
+ /* node is down. not involved in recovery
+ * so just keep going */
+ mlog(0, "%s: node %u was down when sending "
+ "begin reco msg (%d)\n", dlm->name, nodenum, ret);
+ ret = 0;
+ }
if (ret < 0) {
struct dlm_lock_resource *res;
+ /* this is now a serious problem, possibly ENOMEM
+ * in the network stack. must retry */
mlog_errno(ret);
mlog(ML_ERROR, "begin reco of dlm %s to node %u "
" returned %d\n", dlm->name, nodenum, ret);
@@ -2004,7 +2162,10 @@
} else {
mlog(ML_ERROR, "recovery lock not found\n");
}
- break;
+ /* sleep for a bit in hopes that we can avoid
+ * another ENOMEM */
+ msleep(100);
+ goto retry;
}
}
@@ -2027,19 +2188,34 @@
spin_lock(&dlm->spinlock);
if (dlm->reco.new_master != O2NM_INVALID_NODE_NUM) {
- mlog(0, "new_master already set to %u!\n",
- dlm->reco.new_master);
+ if (test_bit(dlm->reco.new_master, dlm->recovery_map)) {
+ mlog(0, "%s: new_master %u died, changing "
+ "to %u\n", dlm->name, dlm->reco.new_master,
+ br->node_idx);
+ } else {
+ mlog(0, "%s: new_master %u NOT DEAD, changing "
+ "to %u\n", dlm->name, dlm->reco.new_master,
+ br->node_idx);
+ /* may not have seen the new master as dead yet */
+ }
}
if (dlm->reco.dead_node != O2NM_INVALID_NODE_NUM) {
- mlog(0, "dead_node already set to %u!\n",
- dlm->reco.dead_node);
+ mlog(ML_NOTICE, "%s: dead_node previously set to %u, "
+ "node %u changing it to %u\n", dlm->name,
+ dlm->reco.dead_node, br->node_idx, br->dead_node);
}
dlm->reco.new_master = br->node_idx;
dlm->reco.dead_node = br->dead_node;
if (!test_bit(br->dead_node, dlm->recovery_map)) {
- mlog(ML_ERROR, "recovery master %u sees %u as dead, but this "
+ mlog(0, "recovery master %u sees %u as dead, but this "
"node has not yet. marking %u as dead\n",
br->node_idx, br->dead_node, br->dead_node);
+ if (!test_bit(br->dead_node, dlm->domain_map) ||
+ !test_bit(br->dead_node, dlm->live_nodes_map))
+ mlog(0, "%u not in domain/live_nodes map "
+ "so setting it in reco map manually\n",
+ br->dead_node);
+ set_bit(br->dead_node, dlm->recovery_map);
__dlm_hb_node_down(dlm, br->dead_node);
}
spin_unlock(&dlm->spinlock);
diff --git a/fs/ocfs2/dlm/dlmunlock.c b/fs/ocfs2/dlm/dlmunlock.c
index cec2ce1..c95f08d 100644
--- a/fs/ocfs2/dlm/dlmunlock.c
+++ b/fs/ocfs2/dlm/dlmunlock.c
@@ -188,6 +188,19 @@
actions &= ~(DLM_UNLOCK_REMOVE_LOCK|
DLM_UNLOCK_REGRANT_LOCK|
DLM_UNLOCK_CLEAR_CONVERT_TYPE);
+ } else if (status == DLM_RECOVERING ||
+ status == DLM_MIGRATING ||
+ status == DLM_FORWARD) {
+ /* must clear the actions because this unlock
+ * is about to be retried. cannot free or do
+ * any list manipulation. */
+ mlog(0, "%s:%.*s: clearing actions, %s\n",
+ dlm->name, res->lockname.len,
+ res->lockname.name,
+ status==DLM_RECOVERING?"recovering":
+ (status==DLM_MIGRATING?"migrating":
+ "forward"));
+ actions = 0;
}
if (flags & LKM_CANCEL)
lock->cancel_pending = 0;
diff --git a/fs/ocfs2/dlm/userdlm.c b/fs/ocfs2/dlm/userdlm.c
index e1fdd28..c3764f4 100644
--- a/fs/ocfs2/dlm/userdlm.c
+++ b/fs/ocfs2/dlm/userdlm.c
@@ -27,7 +27,7 @@
* Boston, MA 021110-1307, USA.
*/
-#include <asm/signal.h>
+#include <linux/signal.h>
#include <linux/module.h>
#include <linux/fs.h>
diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c
index f2fb40c..b6ba292 100644
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@@ -262,8 +262,7 @@
el = &eb->h_list;
}
- if (el->l_tree_depth)
- BUG();
+ BUG_ON(el->l_tree_depth);
for (i = 0; i < le16_to_cpu(el->l_next_free_rec); i++) {
rec = &el->l_recs[i];
@@ -364,8 +363,8 @@
return ret;
}
- if (ent->e_tree_depth)
- BUG(); /* FIXME: Make sure this isn't a corruption */
+ /* FIXME: Make sure this isn't a corruption */
+ BUG_ON(ent->e_tree_depth);
*ret_ent = ent;
@@ -423,8 +422,7 @@
le32_to_cpu(rec->e_clusters), NULL,
NULL);
- if (!old_ent)
- BUG();
+ BUG_ON(!old_ent);
ret = -EEXIST;
if (old_ent->e_tree_depth < tree_depth)
@@ -988,7 +986,7 @@
return 0;
}
-void __exit exit_ocfs2_extent_maps(void)
+void exit_ocfs2_extent_maps(void)
{
kmem_cache_destroy(ocfs2_em_ent_cachep);
}
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index eaf33ca..1715bc9 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1022,8 +1022,9 @@
}
newsize = count + saved_pos;
- mlog(0, "pos=%lld newsize=%"MLFu64" cursize=%lld\n",
- saved_pos, newsize, i_size_read(inode));
+ mlog(0, "pos=%lld newsize=%lld cursize=%lld\n",
+ (long long) saved_pos, (long long) newsize,
+ (long long) i_size_read(inode));
/* No need for a higher level metadata lock if we're
* never going past i_size. */
@@ -1042,8 +1043,9 @@
spin_unlock(&OCFS2_I(inode)->ip_lock);
mlog(0, "Writing at EOF, may need more allocation: "
- "i_size = %lld, newsize = %"MLFu64", need %u clusters\n",
- i_size_read(inode), newsize, clusters);
+ "i_size = %lld, newsize = %lld, need %u clusters\n",
+ (long long) i_size_read(inode), (long long) newsize,
+ clusters);
/* We only want to continue the rest of this loop if
* our extend will actually require more
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index d4ecc06..8122489 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -903,10 +903,10 @@
"Clear inode of %"MLFu64", inode is locked\n",
oi->ip_blkno);
- mlog_bug_on_msg(down_trylock(&oi->ip_io_sem),
- "Clear inode of %"MLFu64", io_sem is locked\n",
+ mlog_bug_on_msg(!mutex_trylock(&oi->ip_io_mutex),
+ "Clear inode of %"MLFu64", io_mutex is locked\n",
oi->ip_blkno);
- up(&oi->ip_io_sem);
+ mutex_unlock(&oi->ip_io_mutex);
/*
* down_trylock() returns 0, down_write_trylock() returns 1
diff --git a/fs/ocfs2/inode.h b/fs/ocfs2/inode.h
index 9b01774..84c5079 100644
--- a/fs/ocfs2/inode.h
+++ b/fs/ocfs2/inode.h
@@ -46,10 +46,10 @@
struct list_head ip_io_markers;
int ip_orphaned_slot;
- struct semaphore ip_io_sem;
+ struct mutex ip_io_mutex;
/* Used by the journalling code to attach an inode to a
- * handle. These are protected by ip_io_sem in order to lock
+ * handle. These are protected by ip_io_mutex in order to lock
* out other I/O to the inode until we either commit or
* abort. */
struct list_head ip_handle_list;
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 303c8d9..fa0bcac 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -147,8 +147,7 @@
mlog_entry("(max_buffs = %d)\n", max_buffs);
- if (!osb || !osb->journal->j_journal)
- BUG();
+ BUG_ON(!osb || !osb->journal->j_journal);
if (ocfs2_is_hard_readonly(osb)) {
ret = -EROFS;
@@ -401,7 +400,7 @@
* j_trans_barrier for us. */
ocfs2_set_inode_lock_trans(OCFS2_SB(inode->i_sb)->journal, inode);
- down(&OCFS2_I(inode)->ip_io_sem);
+ mutex_lock(&OCFS2_I(inode)->ip_io_mutex);
switch (type) {
case OCFS2_JOURNAL_ACCESS_CREATE:
case OCFS2_JOURNAL_ACCESS_WRITE:
@@ -416,7 +415,7 @@
status = -EINVAL;
mlog(ML_ERROR, "Uknown access type!\n");
}
- up(&OCFS2_I(inode)->ip_io_sem);
+ mutex_unlock(&OCFS2_I(inode)->ip_io_mutex);
if (status < 0)
mlog(ML_ERROR, "Error %d getting %d access to buffer!\n",
@@ -561,7 +560,11 @@
SET_INODE_JOURNAL(inode);
OCFS2_I(inode)->ip_open_count++;
- status = ocfs2_meta_lock(inode, NULL, &bh, 1);
+ /* Skip recovery waits here - journal inode metadata never
+ * changes in a live cluster so it can be considered an
+ * exception to the rule. */
+ status = ocfs2_meta_lock_full(inode, NULL, &bh, 1,
+ OCFS2_META_LOCK_RECOVERY);
if (status < 0) {
if (status != -ERESTARTSYS)
mlog(ML_ERROR, "Could not get lock on journal!\n");
@@ -672,8 +675,7 @@
mlog_entry_void();
- if (!osb)
- BUG();
+ BUG_ON(!osb);
journal = osb->journal;
if (!journal)
@@ -805,8 +807,7 @@
mlog_entry_void();
- if (!journal)
- BUG();
+ BUG_ON(!journal);
status = journal_wipe(journal->j_journal, full);
if (status < 0) {
@@ -1072,10 +1073,10 @@
NULL);
bail:
- down(&osb->recovery_lock);
+ mutex_lock(&osb->recovery_lock);
if (!status &&
!ocfs2_node_map_is_empty(osb, &osb->recovery_map)) {
- up(&osb->recovery_lock);
+ mutex_unlock(&osb->recovery_lock);
goto restart;
}
@@ -1083,7 +1084,7 @@
mb(); /* sync with ocfs2_recovery_thread_running */
wake_up(&osb->recovery_event);
- up(&osb->recovery_lock);
+ mutex_unlock(&osb->recovery_lock);
mlog_exit(status);
/* no one is callint kthread_stop() for us so the kthread() api
@@ -1098,7 +1099,7 @@
mlog_entry("(node_num=%d, osb->node_num = %d)\n",
node_num, osb->node_num);
- down(&osb->recovery_lock);
+ mutex_lock(&osb->recovery_lock);
if (osb->disable_recovery)
goto out;
@@ -1120,7 +1121,7 @@
}
out:
- up(&osb->recovery_lock);
+ mutex_unlock(&osb->recovery_lock);
wake_up(&osb->recovery_event);
mlog_exit_void();
@@ -1271,8 +1272,7 @@
/* Should not ever be called to recover ourselves -- in that
* case we should've called ocfs2_journal_load instead. */
- if (osb->node_num == node_num)
- BUG();
+ BUG_ON(osb->node_num == node_num);
slot_num = ocfs2_node_num_to_slot(si, node_num);
if (slot_num == OCFS2_INVALID_SLOT) {
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index f468c60..8d8e477 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -33,6 +33,7 @@
#include <linux/rbtree.h>
#include <linux/workqueue.h>
#include <linux/kref.h>
+#include <linux/mutex.h>
#include "cluster/nodemanager.h"
#include "cluster/heartbeat.h"
@@ -233,7 +234,7 @@
struct proc_dir_entry *proc_sub_dir; /* points to /proc/fs/ocfs2/<maj_min> */
atomic_t vol_state;
- struct semaphore recovery_lock;
+ struct mutex recovery_lock;
struct task_struct *recovery_thread_task;
int disable_recovery;
wait_queue_head_t checkpoint_event;
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 364d64b..046824b 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -932,7 +932,7 @@
oi->ip_dir_start_lookup = 0;
init_rwsem(&oi->ip_alloc_sem);
- init_MUTEX(&(oi->ip_io_sem));
+ mutex_init(&oi->ip_io_mutex);
oi->ip_blkno = 0ULL;
oi->ip_clusters = 0;
@@ -1137,9 +1137,9 @@
/* disable any new recovery threads and wait for any currently
* running ones to exit. Do this before setting the vol_state. */
- down(&osb->recovery_lock);
+ mutex_lock(&osb->recovery_lock);
osb->disable_recovery = 1;
- up(&osb->recovery_lock);
+ mutex_unlock(&osb->recovery_lock);
wait_event(osb->recovery_event, !ocfs2_recovery_thread_running(osb));
/* At this point, we know that no more recovery threads can be
@@ -1254,8 +1254,7 @@
osb->sb = sb;
/* Save off for ocfs2_rw_direct */
osb->s_sectsize_bits = blksize_bits(sector_size);
- if (!osb->s_sectsize_bits)
- BUG();
+ BUG_ON(!osb->s_sectsize_bits);
osb->net_response_ids = 0;
spin_lock_init(&osb->net_response_lock);
@@ -1283,7 +1282,7 @@
snprintf(osb->dev_str, sizeof(osb->dev_str), "%u,%u",
MAJOR(osb->sb->s_dev), MINOR(osb->sb->s_dev));
- init_MUTEX(&osb->recovery_lock);
+ mutex_init(&osb->recovery_lock);
osb->disable_recovery = 0;
osb->recovery_thread_task = NULL;
diff --git a/fs/ocfs2/sysfile.c b/fs/ocfs2/sysfile.c
index 600a8bc5..fc29cb7 100644
--- a/fs/ocfs2/sysfile.c
+++ b/fs/ocfs2/sysfile.c
@@ -77,8 +77,7 @@
if (arr && ((inode = *arr) != NULL)) {
/* get a ref in addition to the array ref */
inode = igrab(inode);
- if (!inode)
- BUG();
+ BUG_ON(!inode);
return inode;
}
@@ -89,8 +88,7 @@
/* add one more if putting into array for first time */
if (arr && inode) {
*arr = igrab(inode);
- if (!*arr)
- BUG();
+ BUG_ON(!*arr);
}
return inode;
}
diff --git a/fs/ocfs2/uptodate.c b/fs/ocfs2/uptodate.c
index 3a0458f..300b5be 100644
--- a/fs/ocfs2/uptodate.c
+++ b/fs/ocfs2/uptodate.c
@@ -388,7 +388,7 @@
}
}
-/* Item insertion is guarded by ip_io_sem, so the insertion path takes
+/* Item insertion is guarded by ip_io_mutex, so the insertion path takes
* advantage of this by not rechecking for a duplicate insert during
* the slow case. Additionally, if the cache needs to be bumped up to
* a tree, the code will not recheck after acquiring the lock --
@@ -418,7 +418,7 @@
(unsigned long long) bh->b_blocknr);
/* No need to recheck under spinlock - insertion is guarded by
- * ip_io_sem */
+ * ip_io_mutex */
spin_lock(&oi->ip_lock);
if (ocfs2_insert_can_use_array(oi, ci)) {
/* Fast case - it's an array and there's a free
@@ -440,7 +440,7 @@
/* Called against a newly allocated buffer. Most likely nobody should
* be able to read this sort of metadata while it's still being
- * allocated, but this is careful to take ip_io_sem anyway. */
+ * allocated, but this is careful to take ip_io_mutex anyway. */
void ocfs2_set_new_buffer_uptodate(struct inode *inode,
struct buffer_head *bh)
{
@@ -451,9 +451,9 @@
set_buffer_uptodate(bh);
- down(&oi->ip_io_sem);
+ mutex_lock(&oi->ip_io_mutex);
ocfs2_set_buffer_uptodate(inode, bh);
- up(&oi->ip_io_sem);
+ mutex_unlock(&oi->ip_io_mutex);
}
/* Requires ip_lock. */
@@ -537,7 +537,7 @@
return 0;
}
-void __exit exit_ocfs2_uptodate_cache(void)
+void exit_ocfs2_uptodate_cache(void)
{
if (ocfs2_uptodate_cachep)
kmem_cache_destroy(ocfs2_uptodate_cachep);
diff --git a/fs/ocfs2/uptodate.h b/fs/ocfs2/uptodate.h
index e5aacdf..01cd32d 100644
--- a/fs/ocfs2/uptodate.h
+++ b/fs/ocfs2/uptodate.h
@@ -27,7 +27,7 @@
#define OCFS2_UPTODATE_H
int __init init_ocfs2_uptodate_cache(void);
-void __exit exit_ocfs2_uptodate_cache(void);
+void exit_ocfs2_uptodate_cache(void);
void ocfs2_metadata_cache_init(struct inode *inode);
void ocfs2_metadata_cache_purge(struct inode *inode);
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index 8f80142..1d24fea 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -548,7 +548,7 @@
}
seq_printf(p, "intr %llu", (unsigned long long)sum);
-#if !defined(CONFIG_PPC64) && !defined(CONFIG_ALPHA)
+#if !defined(CONFIG_PPC64) && !defined(CONFIG_ALPHA) && !defined(CONFIG_IA64)
for (i = 0; i < NR_IRQS; i++)
seq_printf(p, " %u", kstat_irqs(i));
#endif
diff --git a/fs/quota_v2.c b/fs/quota_v2.c
index a4ef91b..b4199ec 100644
--- a/fs/quota_v2.c
+++ b/fs/quota_v2.c
@@ -35,7 +35,7 @@
size = sb->s_op->quota_read(sb, type, (char *)&dqhead, sizeof(struct v2_disk_dqheader), 0);
if (size != sizeof(struct v2_disk_dqheader)) {
- printk("quota_v2: failed read expected=%d got=%d\n",
+ printk("quota_v2: failed read expected=%zd got=%zd\n",
sizeof(struct v2_disk_dqheader), size);
return 0;
}
diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c
index 9dd71e8..d71ac65 100644
--- a/fs/reiserfs/dir.c
+++ b/fs/reiserfs/dir.c
@@ -150,18 +150,15 @@
if (d_reclen <= 32) {
local_buf = small_buf;
} else {
- local_buf =
- reiserfs_kmalloc(d_reclen, GFP_NOFS,
- inode->i_sb);
+ local_buf = kmalloc(d_reclen,
+ GFP_NOFS);
if (!local_buf) {
pathrelse(&path_to_entry);
ret = -ENOMEM;
goto out;
}
if (item_moved(&tmp_ih, &path_to_entry)) {
- reiserfs_kfree(local_buf,
- d_reclen,
- inode->i_sb);
+ kfree(local_buf);
goto research;
}
}
@@ -174,15 +171,12 @@
(dirent, local_buf, d_reclen, d_off, d_ino,
DT_UNKNOWN) < 0) {
if (local_buf != small_buf) {
- reiserfs_kfree(local_buf,
- d_reclen,
- inode->i_sb);
+ kfree(local_buf);
}
goto end;
}
if (local_buf != small_buf) {
- reiserfs_kfree(local_buf, d_reclen,
- inode->i_sb);
+ kfree(local_buf);
}
// next entry should be looked for with such offset
next_pos = deh_offset(deh) + 1;
diff --git a/fs/reiserfs/file.c b/fs/reiserfs/file.c
index ad6fa96..f347317 100644
--- a/fs/reiserfs/file.c
+++ b/fs/reiserfs/file.c
@@ -192,6 +192,8 @@
allocated_blocks = kmalloc((blocks_to_allocate + will_prealloc) *
sizeof(b_blocknr_t), GFP_NOFS);
+ if (!allocated_blocks)
+ return -ENOMEM;
/* First we compose a key to point at the writing position, we want to do
that outside of any locking region. */
@@ -1285,6 +1287,23 @@
struct reiserfs_transaction_handle th;
th.t_trans_id = 0;
+ /* If a filesystem is converted from 3.5 to 3.6, we'll have v3.5 items
+ * lying around (most of the disk, in fact). Despite the filesystem
+ * now being a v3.6 format, the old items still can't support large
+ * file sizes. Catch this case here, as the rest of the VFS layer is
+ * oblivious to the different limitations between old and new items.
+ * reiserfs_setattr catches this for truncates. This chunk is lifted
+ * from generic_write_checks. */
+ if (get_inode_item_key_version (inode) == KEY_FORMAT_3_5 &&
+ *ppos + count > MAX_NON_LFS) {
+ if (*ppos >= MAX_NON_LFS) {
+ send_sig(SIGXFSZ, current, 0);
+ return -EFBIG;
+ }
+ if (count > MAX_NON_LFS - (unsigned long)*ppos)
+ count = MAX_NON_LFS - (unsigned long)*ppos;
+ }
+
if (file->f_flags & O_DIRECT) { // Direct IO needs treatment
ssize_t result, after_file_end = 0;
if ((*ppos + count >= inode->i_size)
diff --git a/fs/reiserfs/fix_node.c b/fs/reiserfs/fix_node.c
index 4582988..aa22588 100644
--- a/fs/reiserfs/fix_node.c
+++ b/fs/reiserfs/fix_node.c
@@ -2021,38 +2021,6 @@
return CARRY_ON;
}
-#ifdef CONFIG_REISERFS_CHECK
-void *reiserfs_kmalloc(size_t size, gfp_t flags, struct super_block *s)
-{
- void *vp;
- static size_t malloced;
-
- vp = kmalloc(size, flags);
- if (vp) {
- REISERFS_SB(s)->s_kmallocs += size;
- if (REISERFS_SB(s)->s_kmallocs > malloced + 200000) {
- reiserfs_warning(s,
- "vs-8301: reiserfs_kmalloc: allocated memory %d",
- REISERFS_SB(s)->s_kmallocs);
- malloced = REISERFS_SB(s)->s_kmallocs;
- }
- }
- return vp;
-}
-
-void reiserfs_kfree(const void *vp, size_t size, struct super_block *s)
-{
- kfree(vp);
-
- REISERFS_SB(s)->s_kmallocs -= size;
- if (REISERFS_SB(s)->s_kmallocs < 0)
- reiserfs_warning(s,
- "vs-8302: reiserfs_kfree: allocated memory %d",
- REISERFS_SB(s)->s_kmallocs);
-
-}
-#endif
-
static int get_virtual_node_size(struct super_block *sb, struct buffer_head *bh)
{
int max_num_of_items;
@@ -2086,7 +2054,7 @@
/* we have to allocate more memory for virtual node */
if (tb->vn_buf) {
/* free memory allocated before */
- reiserfs_kfree(tb->vn_buf, tb->vn_buf_size, tb->tb_sb);
+ kfree(tb->vn_buf);
/* this is not needed if kfree is atomic */
check_fs = 1;
}
@@ -2095,24 +2063,15 @@
tb->vn_buf_size = size;
/* get memory for virtual item */
- buf =
- reiserfs_kmalloc(size, GFP_ATOMIC | __GFP_NOWARN,
- tb->tb_sb);
+ buf = kmalloc(size, GFP_ATOMIC | __GFP_NOWARN);
if (!buf) {
/* getting memory with GFP_KERNEL priority may involve
balancing now (due to indirect_to_direct conversion on
dcache shrinking). So, release path and collected
resources here */
free_buffers_in_tb(tb);
- buf = reiserfs_kmalloc(size, GFP_NOFS, tb->tb_sb);
+ buf = kmalloc(size, GFP_NOFS);
if (!buf) {
-#ifdef CONFIG_REISERFS_CHECK
- reiserfs_warning(tb->tb_sb,
- "vs-8345: get_mem_for_virtual_node: "
- "kmalloc failed. reiserfs kmalloced %d bytes",
- REISERFS_SB(tb->tb_sb)->
- s_kmallocs);
-#endif
tb->vn_buf_size = 0;
}
tb->vn_buf = buf;
@@ -2619,7 +2578,6 @@
}
}
- if (tb->vn_buf)
- reiserfs_kfree(tb->vn_buf, tb->vn_buf_size, tb->tb_sb);
+ kfree(tb->vn_buf);
}
diff --git a/fs/reiserfs/hashes.c b/fs/reiserfs/hashes.c
index a3ec238..e664ac1 100644
--- a/fs/reiserfs/hashes.c
+++ b/fs/reiserfs/hashes.c
@@ -21,7 +21,6 @@
#include <linux/kernel.h>
#include <linux/reiserfs_fs.h>
#include <asm/types.h>
-#include <asm/bug.h>
#define DELTA 0x9E3779B9
#define FULLROUNDS 10 /* 32 is overkill, 16 is strong crypto */
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index ffa34b8..b33d67b 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -2363,6 +2363,13 @@
int bh_per_page = PAGE_CACHE_SIZE / s->s_blocksize;
th.t_trans_id = 0;
+ /* no logging allowed when nonblocking or from PF_MEMALLOC */
+ if (checked && (current->flags & PF_MEMALLOC)) {
+ redirty_page_for_writepage(wbc, page);
+ unlock_page(page);
+ return 0;
+ }
+
/* The page dirty bit is cleared before writepage is called, which
* means we have to tell create_empty_buffers to make dirty buffers
* The page really should be up to date at this point, so tossing
@@ -2743,6 +2750,7 @@
int ret = 1;
struct reiserfs_journal *j = SB_JOURNAL(inode->i_sb);
+ lock_buffer(bh);
spin_lock(&j->j_dirty_buffers_lock);
if (!buffer_mapped(bh)) {
goto free_jh;
@@ -2758,7 +2766,7 @@
if (buffer_journaled(bh) || buffer_journal_dirty(bh)) {
ret = 0;
}
- } else if (buffer_dirty(bh) || buffer_locked(bh)) {
+ } else if (buffer_dirty(bh)) {
struct reiserfs_journal_list *jl;
struct reiserfs_jh *jh = bh->b_private;
@@ -2784,6 +2792,7 @@
reiserfs_free_jh(bh);
}
spin_unlock(&j->j_dirty_buffers_lock);
+ unlock_buffer(bh);
return ret;
}
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index 4491fcf..b7a1795 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -152,18 +152,16 @@
struct reiserfs_bitmap_node *bn;
static int id;
- bn = reiserfs_kmalloc(sizeof(struct reiserfs_bitmap_node), GFP_NOFS,
- p_s_sb);
+ bn = kmalloc(sizeof(struct reiserfs_bitmap_node), GFP_NOFS);
if (!bn) {
return NULL;
}
- bn->data = reiserfs_kmalloc(p_s_sb->s_blocksize, GFP_NOFS, p_s_sb);
+ bn->data = kzalloc(p_s_sb->s_blocksize, GFP_NOFS);
if (!bn->data) {
- reiserfs_kfree(bn, sizeof(struct reiserfs_bitmap_node), p_s_sb);
+ kfree(bn);
return NULL;
}
bn->id = id++;
- memset(bn->data, 0, p_s_sb->s_blocksize);
INIT_LIST_HEAD(&bn->list);
return bn;
}
@@ -197,8 +195,8 @@
struct reiserfs_journal *journal = SB_JOURNAL(p_s_sb);
journal->j_used_bitmap_nodes--;
if (journal->j_free_bitmap_nodes > REISERFS_MAX_BITMAP_NODES) {
- reiserfs_kfree(bn->data, p_s_sb->s_blocksize, p_s_sb);
- reiserfs_kfree(bn, sizeof(struct reiserfs_bitmap_node), p_s_sb);
+ kfree(bn->data);
+ kfree(bn);
} else {
list_add(&bn->list, &journal->j_bitmap_nodes);
journal->j_free_bitmap_nodes++;
@@ -276,8 +274,8 @@
while (next != &journal->j_bitmap_nodes) {
bn = list_entry(next, struct reiserfs_bitmap_node, list);
list_del(next);
- reiserfs_kfree(bn->data, p_s_sb->s_blocksize, p_s_sb);
- reiserfs_kfree(bn, sizeof(struct reiserfs_bitmap_node), p_s_sb);
+ kfree(bn->data);
+ kfree(bn);
next = journal->j_bitmap_nodes.next;
journal->j_free_bitmap_nodes--;
}
@@ -581,7 +579,7 @@
jl->j_trans_id, jl->j_refcount);
}
if (--jl->j_refcount == 0)
- reiserfs_kfree(jl, sizeof(struct reiserfs_journal_list), s);
+ kfree(jl);
}
/*
@@ -848,6 +846,14 @@
spin_lock(lock);
goto loop_next;
}
+ /* in theory, dirty non-uptodate buffers should never get here,
+ * but the upper layer io error paths still have a few quirks.
+ * Handle them here as gracefully as we can
+ */
+ if (!buffer_uptodate(bh) && buffer_dirty(bh)) {
+ clear_buffer_dirty(bh);
+ ret = -EIO;
+ }
if (buffer_dirty(bh)) {
list_del_init(&jh->list);
list_add(&jh->list, &tmp);
@@ -879,6 +885,19 @@
if (!buffer_uptodate(bh)) {
ret = -EIO;
}
+ /* ugly interaction with invalidatepage here.
+ * reiserfs_invalidate_page will pin any buffer that has a valid
+ * journal head from an older transaction. If someone else sets
+ * our buffer dirty after we write it in the first loop, and
+ * then someone truncates the page away, nobody will ever write
+ * the buffer. We're safe if we write the page one last time
+ * after freeing the journal header.
+ */
+ if (buffer_dirty(bh) && unlikely(bh->b_page->mapping == NULL)) {
+ spin_unlock(lock);
+ ll_rw_block(WRITE, 1, &bh);
+ spin_lock(lock);
+ }
put_bh(bh);
cond_resched_lock(lock);
}
@@ -977,6 +996,7 @@
struct reiserfs_journal *journal = SB_JOURNAL(s);
int barrier = 0;
int retval = 0;
+ int write_len;
reiserfs_check_lock_depth(s, "flush_commit_list");
@@ -1018,24 +1038,35 @@
}
if (!list_empty(&jl->j_bh_list)) {
+ int ret;
unlock_kernel();
- write_ordered_buffers(&journal->j_dirty_buffers_lock,
- journal, jl, &jl->j_bh_list);
+ ret = write_ordered_buffers(&journal->j_dirty_buffers_lock,
+ journal, jl, &jl->j_bh_list);
+ if (ret < 0 && retval == 0)
+ retval = ret;
lock_kernel();
}
BUG_ON(!list_empty(&jl->j_bh_list));
/*
* for the description block and all the log blocks, submit any buffers
- * that haven't already reached the disk
+ * that haven't already reached the disk. Try to write at least 256
+ * log blocks. later on, we will only wait on blocks that correspond
+ * to this transaction, but while we're unplugging we might as well
+ * get a chunk of data on there.
*/
atomic_inc(&journal->j_async_throttle);
- for (i = 0; i < (jl->j_len + 1); i++) {
+ write_len = jl->j_len + 1;
+ if (write_len < 256)
+ write_len = 256;
+ for (i = 0 ; i < write_len ; i++) {
bn = SB_ONDISK_JOURNAL_1st_BLOCK(s) + (jl->j_start + i) %
SB_ONDISK_JOURNAL_SIZE(s);
tbh = journal_find_get_block(s, bn);
- if (buffer_dirty(tbh)) /* redundant, ll_rw_block() checks */
- ll_rw_block(SWRITE, 1, &tbh);
- put_bh(tbh);
+ if (tbh) {
+ if (buffer_dirty(tbh))
+ ll_rw_block(WRITE, 1, &tbh) ;
+ put_bh(tbh) ;
+ }
}
atomic_dec(&journal->j_async_throttle);
@@ -1818,8 +1849,7 @@
static void free_journal_ram(struct super_block *p_s_sb)
{
struct reiserfs_journal *journal = SB_JOURNAL(p_s_sb);
- reiserfs_kfree(journal->j_current_jl,
- sizeof(struct reiserfs_journal_list), p_s_sb);
+ kfree(journal->j_current_jl);
journal->j_num_lists--;
vfree(journal->j_cnode_free_orig);
@@ -2093,21 +2123,15 @@
}
trans_id = get_desc_trans_id(desc);
/* now we know we've got a good transaction, and it was inside the valid time ranges */
- log_blocks =
- reiserfs_kmalloc(get_desc_trans_len(desc) *
- sizeof(struct buffer_head *), GFP_NOFS, p_s_sb);
- real_blocks =
- reiserfs_kmalloc(get_desc_trans_len(desc) *
- sizeof(struct buffer_head *), GFP_NOFS, p_s_sb);
+ log_blocks = kmalloc(get_desc_trans_len(desc) *
+ sizeof(struct buffer_head *), GFP_NOFS);
+ real_blocks = kmalloc(get_desc_trans_len(desc) *
+ sizeof(struct buffer_head *), GFP_NOFS);
if (!log_blocks || !real_blocks) {
brelse(c_bh);
brelse(d_bh);
- reiserfs_kfree(log_blocks,
- get_desc_trans_len(desc) *
- sizeof(struct buffer_head *), p_s_sb);
- reiserfs_kfree(real_blocks,
- get_desc_trans_len(desc) *
- sizeof(struct buffer_head *), p_s_sb);
+ kfree(log_blocks);
+ kfree(real_blocks);
reiserfs_warning(p_s_sb,
"journal-1169: kmalloc failed, unable to mount FS");
return -1;
@@ -2145,12 +2169,8 @@
brelse_array(real_blocks, i);
brelse(c_bh);
brelse(d_bh);
- reiserfs_kfree(log_blocks,
- get_desc_trans_len(desc) *
- sizeof(struct buffer_head *), p_s_sb);
- reiserfs_kfree(real_blocks,
- get_desc_trans_len(desc) *
- sizeof(struct buffer_head *), p_s_sb);
+ kfree(log_blocks);
+ kfree(real_blocks);
return -1;
}
}
@@ -2166,12 +2186,8 @@
brelse_array(real_blocks, get_desc_trans_len(desc));
brelse(c_bh);
brelse(d_bh);
- reiserfs_kfree(log_blocks,
- get_desc_trans_len(desc) *
- sizeof(struct buffer_head *), p_s_sb);
- reiserfs_kfree(real_blocks,
- get_desc_trans_len(desc) *
- sizeof(struct buffer_head *), p_s_sb);
+ kfree(log_blocks);
+ kfree(real_blocks);
return -1;
}
memcpy(real_blocks[i]->b_data, log_blocks[i]->b_data,
@@ -2193,12 +2209,8 @@
get_desc_trans_len(desc) - i);
brelse(c_bh);
brelse(d_bh);
- reiserfs_kfree(log_blocks,
- get_desc_trans_len(desc) *
- sizeof(struct buffer_head *), p_s_sb);
- reiserfs_kfree(real_blocks,
- get_desc_trans_len(desc) *
- sizeof(struct buffer_head *), p_s_sb);
+ kfree(log_blocks);
+ kfree(real_blocks);
return -1;
}
brelse(real_blocks[i]);
@@ -2217,12 +2229,8 @@
journal->j_trans_id = trans_id + 1;
brelse(c_bh);
brelse(d_bh);
- reiserfs_kfree(log_blocks,
- le32_to_cpu(desc->j_len) * sizeof(struct buffer_head *),
- p_s_sb);
- reiserfs_kfree(real_blocks,
- le32_to_cpu(desc->j_len) * sizeof(struct buffer_head *),
- p_s_sb);
+ kfree(log_blocks);
+ kfree(real_blocks);
return 0;
}
@@ -2471,14 +2479,8 @@
static struct reiserfs_journal_list *alloc_journal_list(struct super_block *s)
{
struct reiserfs_journal_list *jl;
- retry:
- jl = reiserfs_kmalloc(sizeof(struct reiserfs_journal_list), GFP_NOFS,
- s);
- if (!jl) {
- yield();
- goto retry;
- }
- memset(jl, 0, sizeof(*jl));
+ jl = kzalloc(sizeof(struct reiserfs_journal_list),
+ GFP_NOFS | __GFP_NOFAIL);
INIT_LIST_HEAD(&jl->j_list);
INIT_LIST_HEAD(&jl->j_working_list);
INIT_LIST_HEAD(&jl->j_tail_bh_list);
@@ -2821,6 +2823,9 @@
journal->j_cnode_free < (journal->j_trans_max * 3)) {
return 1;
}
+ /* protected by the BKL here */
+ journal->j_len_alloc += new_alloc;
+ th->t_blocks_allocated += new_alloc ;
return 0;
}
@@ -3042,14 +3047,12 @@
}
return th;
}
- th = reiserfs_kmalloc(sizeof(struct reiserfs_transaction_handle),
- GFP_NOFS, s);
+ th = kmalloc(sizeof(struct reiserfs_transaction_handle), GFP_NOFS);
if (!th)
return NULL;
ret = journal_begin(th, s, nblocks);
if (ret) {
- reiserfs_kfree(th, sizeof(struct reiserfs_transaction_handle),
- s);
+ kfree(th);
return NULL;
}
@@ -3067,8 +3070,7 @@
ret = -EIO;
if (th->t_refcount == 0) {
SB_JOURNAL(s)->j_persistent_trans--;
- reiserfs_kfree(th, sizeof(struct reiserfs_transaction_handle),
- s);
+ kfree(th);
}
return ret;
}
diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
index 8f8d8d0..c812330 100644
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -456,7 +456,7 @@
/* get memory for composing the entry */
buflen = DEH_SIZE + ROUND_UP(namelen);
if (buflen > sizeof(small_buf)) {
- buffer = reiserfs_kmalloc(buflen, GFP_NOFS, dir->i_sb);
+ buffer = kmalloc(buflen, GFP_NOFS);
if (buffer == 0)
return -ENOMEM;
} else
@@ -490,7 +490,7 @@
retval = reiserfs_find_entry(dir, name, namelen, &path, &de);
if (retval != NAME_NOT_FOUND) {
if (buffer != small_buf)
- reiserfs_kfree(buffer, buflen, dir->i_sb);
+ kfree(buffer);
pathrelse(&path);
if (retval == IO_ERROR) {
@@ -515,7 +515,7 @@
reiserfs_warning(dir->i_sb,
"reiserfs_add_entry: Congratulations! we have got hash function screwed up");
if (buffer != small_buf)
- reiserfs_kfree(buffer, buflen, dir->i_sb);
+ kfree(buffer);
pathrelse(&path);
return -EBUSY;
}
@@ -535,7 +535,7 @@
&entry_key);
if (buffer != small_buf)
- reiserfs_kfree(buffer, buflen, dir->i_sb);
+ kfree(buffer);
pathrelse(&path);
return -EBUSY;
}
@@ -546,7 +546,7 @@
reiserfs_paste_into_item(th, &path, &entry_key, dir, buffer,
paste_size);
if (buffer != small_buf)
- reiserfs_kfree(buffer, buflen, dir->i_sb);
+ kfree(buffer);
if (retval) {
reiserfs_check_path(&path);
return retval;
@@ -1065,7 +1065,7 @@
goto out_failed;
}
- name = reiserfs_kmalloc(item_len, GFP_NOFS, parent_dir->i_sb);
+ name = kmalloc(item_len, GFP_NOFS);
if (!name) {
drop_new_inode(inode);
retval = -ENOMEM;
@@ -1079,14 +1079,14 @@
retval = journal_begin(&th, parent_dir->i_sb, jbegin_count);
if (retval) {
drop_new_inode(inode);
- reiserfs_kfree(name, item_len, parent_dir->i_sb);
+ kfree(name);
goto out_failed;
}
retval =
reiserfs_new_inode(&th, parent_dir, mode, name, strlen(symname),
dentry, inode);
- reiserfs_kfree(name, item_len, parent_dir->i_sb);
+ kfree(name);
if (retval) { /* reiserfs_new_inode iputs for us */
goto out_failed;
}
diff --git a/fs/reiserfs/procfs.c b/fs/reiserfs/procfs.c
index fc2f43c..ef6caed 100644
--- a/fs/reiserfs/procfs.c
+++ b/fs/reiserfs/procfs.c
@@ -88,7 +88,6 @@
seq_printf(m, "state: \t%s\n"
"mount options: \t%s%s%s%s%s%s%s%s%s%s%s\n"
"gen. counter: \t%i\n"
- "s_kmallocs: \t%i\n"
"s_disk_reads: \t%i\n"
"s_disk_writes: \t%i\n"
"s_fix_nodes: \t%i\n"
@@ -128,7 +127,7 @@
"SMALL_TAILS " : "NO_TAILS ",
replay_only(sb) ? "REPLAY_ONLY " : "",
convert_reiserfs(sb) ? "CONV " : "",
- atomic_read(&r->s_generation_counter), SF(s_kmallocs),
+ atomic_read(&r->s_generation_counter),
SF(s_disk_reads), SF(s_disk_writes), SF(s_fix_nodes),
SF(s_do_balance), SF(s_unneeded_left_neighbor),
SF(s_good_search_by_key_reada), SF(s_bmaps),
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 397d959..ef5e541 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -472,12 +472,6 @@
print_statistics(s);
- if (REISERFS_SB(s)->s_kmallocs != 0) {
- reiserfs_warning(s,
- "vs-2004: reiserfs_put_super: allocated memory left %d",
- REISERFS_SB(s)->s_kmallocs);
- }
-
if (REISERFS_SB(s)->reserved_blocks != 0) {
reiserfs_warning(s,
"green-2005: reiserfs_put_super: reserved blocks left %d",
@@ -1131,7 +1125,7 @@
REISERFS_SB(s)->s_mount_opt &= ~(1 << REISERFS_ATTRS);
}
} else if (le32_to_cpu(rs->s_flags) & reiserfs_attrs_cleared) {
- REISERFS_SB(s)->s_mount_opt |= REISERFS_ATTRS;
+ REISERFS_SB(s)->s_mount_opt |= (1 << REISERFS_ATTRS);
}
}
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index cc061bf..ffb79c4 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -368,15 +368,13 @@
if (d_reclen <= 32) {
local_buf = small_buf;
} else {
- local_buf =
- reiserfs_kmalloc(d_reclen, GFP_NOFS, inode->i_sb);
+ local_buf = kmalloc(d_reclen, GFP_NOFS);
if (!local_buf) {
pathrelse(&path_to_entry);
return -ENOMEM;
}
if (item_moved(&tmp_ih, &path_to_entry)) {
- reiserfs_kfree(local_buf, d_reclen,
- inode->i_sb);
+ kfree(local_buf);
/* sigh, must retry. Do this same offset again */
next_pos = d_off;
@@ -399,13 +397,12 @@
if (filldir(dirent, local_buf, d_reclen, d_off, d_ino,
DT_UNKNOWN) < 0) {
if (local_buf != small_buf) {
- reiserfs_kfree(local_buf, d_reclen,
- inode->i_sb);
+ kfree(local_buf);
}
goto end;
}
if (local_buf != small_buf) {
- reiserfs_kfree(local_buf, d_reclen, inode->i_sb);
+ kfree(local_buf);
}
} /* while */
@@ -1322,109 +1319,44 @@
return err;
}
-static int
-__reiserfs_permission(struct inode *inode, int mask, struct nameidata *nd,
- int need_lock)
+static int reiserfs_check_acl(struct inode *inode, int mask)
{
- umode_t mode = inode->i_mode;
+ struct posix_acl *acl;
+ int error = -EAGAIN; /* do regular unix permission checks by default */
- if (mask & MAY_WRITE) {
- /*
- * Nobody gets write access to a read-only fs.
- */
- if (IS_RDONLY(inode) &&
- (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode)))
- return -EROFS;
+ reiserfs_read_lock_xattr_i(inode);
+ reiserfs_read_lock_xattrs(inode->i_sb);
- /*
- * Nobody gets write access to an immutable file.
- */
- if (IS_IMMUTABLE(inode))
- return -EACCES;
- }
+ acl = reiserfs_get_acl(inode, ACL_TYPE_ACCESS);
- /* We don't do permission checks on the internal objects.
- * Permissions are determined by the "owning" object. */
- if (is_reiserfs_priv_object(inode))
- return 0;
+ reiserfs_read_unlock_xattrs(inode->i_sb);
+ reiserfs_read_unlock_xattr_i(inode);
- if (current->fsuid == inode->i_uid) {
- mode >>= 6;
-#ifdef CONFIG_REISERFS_FS_POSIX_ACL
- } else if (reiserfs_posixacl(inode->i_sb) &&
- get_inode_sd_version(inode) != STAT_DATA_V1) {
- struct posix_acl *acl;
-
- /* ACL can't contain additional permissions if
- the ACL_MASK entry is 0 */
- if (!(mode & S_IRWXG))
- goto check_groups;
-
- if (need_lock) {
- reiserfs_read_lock_xattr_i(inode);
- reiserfs_read_lock_xattrs(inode->i_sb);
- }
- acl = reiserfs_get_acl(inode, ACL_TYPE_ACCESS);
- if (need_lock) {
- reiserfs_read_unlock_xattrs(inode->i_sb);
- reiserfs_read_unlock_xattr_i(inode);
- }
- if (IS_ERR(acl)) {
- if (PTR_ERR(acl) == -ENODATA)
- goto check_groups;
- return PTR_ERR(acl);
- }
-
- if (acl) {
- int err = posix_acl_permission(inode, acl, mask);
+ if (acl) {
+ if (!IS_ERR(acl)) {
+ error = posix_acl_permission(inode, acl, mask);
posix_acl_release(acl);
- if (err == -EACCES) {
- goto check_capabilities;
- }
- return err;
- } else {
- goto check_groups;
- }
-#endif
- } else {
- check_groups:
- if (in_group_p(inode->i_gid))
- mode >>= 3;
+ } else if (PTR_ERR(acl) != -ENODATA)
+ error = PTR_ERR(acl);
}
- /*
- * If the DACs are ok we don't need any capability check.
- */
- if (((mode & mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) == mask))
- return 0;
-
- check_capabilities:
- /*
- * Read/write DACs are always overridable.
- * Executable DACs are overridable if at least one exec bit is set.
- */
- if (!(mask & MAY_EXEC) ||
- (inode->i_mode & S_IXUGO) || S_ISDIR(inode->i_mode))
- if (capable(CAP_DAC_OVERRIDE))
- return 0;
-
- /*
- * Searching includes executable on directories, else just read.
- */
- if (mask == MAY_READ || (S_ISDIR(inode->i_mode) && !(mask & MAY_WRITE)))
- if (capable(CAP_DAC_READ_SEARCH))
- return 0;
-
- return -EACCES;
+ return error;
}
int reiserfs_permission(struct inode *inode, int mask, struct nameidata *nd)
{
- return __reiserfs_permission(inode, mask, nd, 1);
-}
+ /*
+ * We don't do permission checks on the internal objects.
+ * Permissions are determined by the "owning" object.
+ */
+ if (is_reiserfs_priv_object(inode))
+ return 0;
-int
-reiserfs_permission_locked(struct inode *inode, int mask, struct nameidata *nd)
-{
- return __reiserfs_permission(inode, mask, nd, 0);
+ /*
+ * Stat data v1 doesn't support ACLs.
+ */
+ if (get_inode_sd_version(inode) == STAT_DATA_V1)
+ return generic_permission(inode, mask, NULL);
+ else
+ return generic_permission(inode, mask, reiserfs_check_acl);
}
diff --git a/fs/select.c b/fs/select.c
index c0f02d3..bc60a3e 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -510,9 +510,9 @@
if (sig) {
if (!access_ok(VERIFY_READ, sig, sizeof(void *)+sizeof(size_t))
- || __get_user(up, (sigset_t * __user *)sig)
+ || __get_user(up, (sigset_t __user * __user *)sig)
|| __get_user(sigsetsize,
- (size_t * __user)(sig+sizeof(void *))))
+ (size_t __user *)(sig+sizeof(void *))))
return -EFAULT;
}
diff --git a/fs/smbfs/dir.c b/fs/smbfs/dir.c
index c6c33e1..0424d06 100644
--- a/fs/smbfs/dir.c
+++ b/fs/smbfs/dir.c
@@ -209,6 +209,8 @@
ctl.valid = 1;
read_really:
result = server->ops->readdir(filp, dirent, filldir, &ctl);
+ if (result == -ERESTARTSYS && page)
+ ClearPageUptodate(page);
if (ctl.idx == -1)
goto invalid_cache; /* retry */
ctl.head.end = ctl.fpos - 1;
@@ -217,7 +219,8 @@
if (page) {
cache->head = ctl.head;
kunmap(page);
- SetPageUptodate(page);
+ if (result != -ERESTARTSYS)
+ SetPageUptodate(page);
unlock_page(page);
page_cache_release(page);
}
diff --git a/fs/super.c b/fs/super.c
index c177b92..3029421 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -247,8 +247,9 @@
/* Forget any remaining inodes */
if (invalidate_inodes(sb)) {
- printk("VFS: Busy inodes after unmount. "
- "Self-destruct in 5 seconds. Have a nice day...\n");
+ printk("VFS: Busy inodes after unmount of %s. "
+ "Self-destruct in 5 seconds. Have a nice day...\n",
+ sb->s_id);
}
unlock_kernel();
diff --git a/fs/udf/balloc.c b/fs/udf/balloc.c
index 4fae57d..201049a 100644
--- a/fs/udf/balloc.c
+++ b/fs/udf/balloc.c
@@ -579,10 +579,9 @@
{
loffset = nextoffset;
aed->lengthAllocDescs = cpu_to_le32(adsize);
- if (obh)
- sptr = UDF_I_DATA(inode) + nextoffset - udf_file_entry_alloc_offset(inode) + UDF_I_LENEATTR(inode) - adsize;
- else
- sptr = obh->b_data + nextoffset - adsize;
+ sptr = UDF_I_DATA(inode) + nextoffset -
+ udf_file_entry_alloc_offset(inode) +
+ UDF_I_LENEATTR(inode) - adsize;
dptr = nbh->b_data + sizeof(struct allocExtDesc);
memcpy(dptr, sptr, adsize);
nextoffset = sizeof(struct allocExtDesc) + adsize;
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index ca732e7..ab9a762 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -296,7 +296,7 @@
udf_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
{
struct inode *inode = NULL;
- struct fileIdentDesc cfi, *fi;
+ struct fileIdentDesc cfi;
struct udf_fileident_bh fibh;
if (dentry->d_name.len > UDF_NAME_LEN-2)
@@ -318,7 +318,7 @@
else
#endif /* UDF_RECOVERY */
- if ((fi = udf_find_entry(dir, dentry, &fibh, &cfi)))
+ if (udf_find_entry(dir, dentry, &fibh, &cfi))
{
if (fibh.sbh != fibh.ebh)
udf_release_data(fibh.ebh);
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index e0c04e3..3c3f62c 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -376,7 +376,7 @@
* This function gets the block which contains the fragment.
*/
-static int ufs_getfrag_block (struct inode *inode, sector_t fragment, struct buffer_head *bh_result, int create)
+int ufs_getfrag_block (struct inode *inode, sector_t fragment, struct buffer_head *bh_result, int create)
{
struct super_block * sb = inode->i_sb;
struct ufs_sb_private_info * uspi = UFS_SB(sb)->s_uspi;
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index d4aacee..e9055ef 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -388,7 +388,8 @@
/*
* Read on-disk structures associated with cylinder groups
*/
-static int ufs_read_cylinder_structures (struct super_block *sb) {
+static int ufs_read_cylinder_structures (struct super_block *sb)
+{
struct ufs_sb_info * sbi = UFS_SB(sb);
struct ufs_sb_private_info * uspi;
struct ufs_super_block *usb;
@@ -415,6 +416,7 @@
base = space = kmalloc(size, GFP_KERNEL);
if (!base)
goto failed;
+ sbi->s_csp = (struct ufs_csum *)space;
for (i = 0; i < blks; i += uspi->s_fpb) {
size = uspi->s_bsize;
if (i + uspi->s_fpb > blks)
@@ -430,7 +432,6 @@
goto failed;
ubh_ubhcpymem (space, ubh, size);
- sbi->s_csp[ufs_fragstoblks(i)]=(struct ufs_csum *)space;
space += size;
ubh_brelse (ubh);
@@ -486,7 +487,8 @@
* Put on-disk structures associated with cylinder groups and
* write them back to disk
*/
-static void ufs_put_cylinder_structures (struct super_block *sb) {
+static void ufs_put_cylinder_structures (struct super_block *sb)
+{
struct ufs_sb_info * sbi = UFS_SB(sb);
struct ufs_sb_private_info * uspi;
struct ufs_buffer_head * ubh;
@@ -499,7 +501,7 @@
size = uspi->s_cssize;
blks = (size + uspi->s_fsize - 1) >> uspi->s_fshift;
- base = space = (char*) sbi->s_csp[0];
+ base = space = (char*) sbi->s_csp;
for (i = 0; i < blks; i += uspi->s_fpb) {
size = uspi->s_bsize;
if (i + uspi->s_fpb > blks)
diff --git a/fs/ufs/truncate.c b/fs/ufs/truncate.c
index 61d2e35..02e8629 100644
--- a/fs/ufs/truncate.c
+++ b/fs/ufs/truncate.c
@@ -29,6 +29,11 @@
* Idea from Pierre del Perugia <delperug@gla.ecoledoc.ibp.fr>
*/
+/*
+ * Modified to avoid infinite loop on 2006 by
+ * Evgeniy Dushistov <dushistov@mail.ru>
+ */
+
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/ufs_fs.h>
@@ -65,19 +70,16 @@
#define DIRECT_BLOCK ((inode->i_size + uspi->s_bsize - 1) >> uspi->s_bshift)
#define DIRECT_FRAGMENT ((inode->i_size + uspi->s_fsize - 1) >> uspi->s_fshift)
-#define DATA_BUFFER_USED(bh) \
- (atomic_read(&bh->b_count)>1 || buffer_locked(bh))
static int ufs_trunc_direct (struct inode * inode)
{
struct ufs_inode_info *ufsi = UFS_I(inode);
struct super_block * sb;
struct ufs_sb_private_info * uspi;
- struct buffer_head * bh;
__fs32 * p;
unsigned frag1, frag2, frag3, frag4, block1, block2;
unsigned frag_to_free, free_count;
- unsigned i, j, tmp;
+ unsigned i, tmp;
int retry;
UFSD(("ENTER\n"))
@@ -117,15 +119,7 @@
ufs_panic (sb, "ufs_trunc_direct", "internal error");
frag1 = ufs_fragnum (frag1);
frag2 = ufs_fragnum (frag2);
- for (j = frag1; j < frag2; j++) {
- bh = sb_find_get_block (sb, tmp + j);
- if ((bh && DATA_BUFFER_USED(bh)) || tmp != fs32_to_cpu(sb, *p)) {
- retry = 1;
- brelse (bh);
- goto next1;
- }
- bforget (bh);
- }
+
inode->i_blocks -= (frag2-frag1) << uspi->s_nspfshift;
mark_inode_dirty(inode);
ufs_free_fragments (inode, tmp + frag1, frag2 - frag1);
@@ -140,15 +134,7 @@
tmp = fs32_to_cpu(sb, *p);
if (!tmp)
continue;
- for (j = 0; j < uspi->s_fpb; j++) {
- bh = sb_find_get_block(sb, tmp + j);
- if ((bh && DATA_BUFFER_USED(bh)) || tmp != fs32_to_cpu(sb, *p)) {
- retry = 1;
- brelse (bh);
- goto next2;
- }
- bforget (bh);
- }
+
*p = 0;
inode->i_blocks -= uspi->s_nspb;
mark_inode_dirty(inode);
@@ -162,7 +148,6 @@
frag_to_free = tmp;
free_count = uspi->s_fpb;
}
-next2:;
}
if (free_count > 0)
@@ -179,15 +164,7 @@
if (!tmp )
ufs_panic(sb, "ufs_truncate_direct", "internal error");
frag4 = ufs_fragnum (frag4);
- for (j = 0; j < frag4; j++) {
- bh = sb_find_get_block (sb, tmp + j);
- if ((bh && DATA_BUFFER_USED(bh)) || tmp != fs32_to_cpu(sb, *p)) {
- retry = 1;
- brelse (bh);
- goto next1;
- }
- bforget (bh);
- }
+
*p = 0;
inode->i_blocks -= frag4 << uspi->s_nspfshift;
mark_inode_dirty(inode);
@@ -204,9 +181,8 @@
struct super_block * sb;
struct ufs_sb_private_info * uspi;
struct ufs_buffer_head * ind_ubh;
- struct buffer_head * bh;
__fs32 * ind;
- unsigned indirect_block, i, j, tmp;
+ unsigned indirect_block, i, tmp;
unsigned frag_to_free, free_count;
int retry;
@@ -238,15 +214,7 @@
tmp = fs32_to_cpu(sb, *ind);
if (!tmp)
continue;
- for (j = 0; j < uspi->s_fpb; j++) {
- bh = sb_find_get_block(sb, tmp + j);
- if ((bh && DATA_BUFFER_USED(bh)) || tmp != fs32_to_cpu(sb, *ind)) {
- retry = 1;
- brelse (bh);
- goto next;
- }
- bforget (bh);
- }
+
*ind = 0;
ubh_mark_buffer_dirty(ind_ubh);
if (free_count == 0) {
@@ -261,7 +229,6 @@
}
inode->i_blocks -= uspi->s_nspb;
mark_inode_dirty(inode);
-next:;
}
if (free_count > 0) {
@@ -430,9 +397,7 @@
struct ufs_inode_info *ufsi = UFS_I(inode);
struct super_block * sb;
struct ufs_sb_private_info * uspi;
- struct buffer_head * bh;
- unsigned offset;
- int err, retry;
+ int retry;
UFSD(("ENTER\n"))
sb = inode->i_sb;
@@ -442,6 +407,9 @@
return;
if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
return;
+
+ block_truncate_page(inode->i_mapping, inode->i_size, ufs_getfrag_block);
+
lock_kernel();
while (1) {
retry = ufs_trunc_direct(inode);
@@ -457,15 +425,7 @@
blk_run_address_space(inode->i_mapping);
yield();
}
- offset = inode->i_size & uspi->s_fshift;
- if (offset) {
- bh = ufs_bread (inode, inode->i_size >> uspi->s_fshift, 0, &err);
- if (bh) {
- memset (bh->b_data + offset, 0, uspi->s_fsize - offset);
- mark_buffer_dirty (bh);
- brelse (bh);
- }
- }
+
inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
ufsi->i_lastfrag = DIRECT_FRAGMENT;
unlock_kernel();
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 1206267..8f2beec 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -747,10 +747,11 @@
struct backing_dev_info *bdi;
bdi = inode->i_mapping->backing_dev_info;
+ wbc->nr_to_write--;
if (bdi_write_congested(bdi)) {
wbc->encountered_congestion = 1;
done = 1;
- } else if (--wbc->nr_to_write <= 0) {
+ } else if (wbc->nr_to_write <= 0) {
done = 1;
}
}
@@ -1462,4 +1463,5 @@
.commit_write = generic_commit_write,
.bmap = linvfs_bmap,
.direct_IO = linvfs_direct_IO,
+ .migratepage = buffer_migrate_page,
};
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index e44b7c1..bfb4f29 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -822,6 +822,13 @@
XB_TRACE(bp, "rele", bp->b_relse);
+ if (unlikely(!hash)) {
+ ASSERT(!bp->b_relse);
+ if (atomic_dec_and_test(&bp->b_hold))
+ xfs_buf_free(bp);
+ return;
+ }
+
if (atomic_dec_and_lock(&bp->b_hold, &hash->bh_lock)) {
if (bp->b_relse) {
atomic_inc(&bp->b_hold);
@@ -1514,6 +1521,7 @@
struct address_space *mapping;
static struct address_space_operations mapping_aops = {
.sync_page = block_sync_page,
+ .migratepage = fail_migrate_page,
};
inode = new_inode(bdev->bd_inode->i_sb);
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 76c6df3..d7f6f2d 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -262,6 +262,31 @@
return (task->fs != init_task.fs);
}
+STATIC inline void
+cleanup_inode(
+ vnode_t *dvp,
+ vnode_t *vp,
+ struct dentry *dentry,
+ int mode)
+{
+ struct dentry teardown = {};
+ int err2;
+
+ /* Oh, the horror.
+ * If we can't add the ACL or we fail in
+ * linvfs_init_security we must back out.
+ * ENOSPC can hit here, among other things.
+ */
+ teardown.d_inode = LINVFS_GET_IP(vp);
+ teardown.d_name = dentry->d_name;
+
+ if (S_ISDIR(mode))
+ VOP_RMDIR(dvp, &teardown, NULL, err2);
+ else
+ VOP_REMOVE(dvp, &teardown, NULL, err2);
+ VN_RELE(vp);
+}
+
STATIC int
linvfs_mknod(
struct inode *dir,
@@ -316,30 +341,19 @@
}
if (!error)
+ {
error = linvfs_init_security(vp, dir);
+ if (error)
+ cleanup_inode(dvp, vp, dentry, mode);
+ }
if (default_acl) {
if (!error) {
error = _ACL_INHERIT(vp, &va, default_acl);
- if (!error) {
+ if (!error)
VMODIFY(vp);
- } else {
- struct dentry teardown = {};
- int err2;
-
- /* Oh, the horror.
- * If we can't add the ACL we must back out.
- * ENOSPC can hit here, among other things.
- */
- teardown.d_inode = ip = LINVFS_GET_IP(vp);
- teardown.d_name = dentry->d_name;
-
- if (S_ISDIR(mode))
- VOP_RMDIR(dvp, &teardown, NULL, err2);
- else
- VOP_REMOVE(dvp, &teardown, NULL, err2);
- VN_RELE(vp);
- }
+ else
+ cleanup_inode(dvp, vp, dentry, mode);
}
_ACL_FREE(default_acl);
}
@@ -659,6 +673,8 @@
if (ia_valid & ATTR_ATIME) {
vattr.va_mask |= XFS_AT_ATIME;
vattr.va_atime = attr->ia_atime;
+ if (ia_valid & ATTR_ATIME_SET)
+ inode->i_atime = attr->ia_atime;
}
if (ia_valid & ATTR_MTIME) {
vattr.va_mask |= XFS_AT_MTIME;
diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h
index 427cff1..e27dc8f 100644
--- a/include/acpi/acconfig.h
+++ b/include/acpi/acconfig.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -61,9 +61,9 @@
*
*/
-/* Version string */
+/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20050902
+#define ACPI_CA_VERSION 0x20060127
/*
* OS name, used for the _OS object. The _OS object is essentially obsolete,
@@ -83,7 +83,7 @@
#define ACPI_MAX_OBJECT_CACHE_DEPTH 96 /* Interpreter operand objects */
/*
- * Should the subystem abort the loading of an ACPI table if the
+ * Should the subsystem abort the loading of an ACPI table if the
* table checksum is incorrect?
*/
#define ACPI_CHECKSUM_ABORT FALSE
@@ -98,11 +98,6 @@
#define ACPI_CA_SUPPORT_LEVEL 3
-/* String size constants */
-
-#define ACPI_MAX_STRING_LENGTH 512
-#define ACPI_PATHNAME_MAX 256 /* A full namespace pathname */
-
/* Maximum count for a semaphore object */
#define ACPI_MAX_SEMAPHORE_COUNT 256
@@ -115,6 +110,10 @@
#define ACPI_SYSMEM_REGION_WINDOW_SIZE 4096
+/* owner_id tracking. 8 entries allows for 255 owner_ids */
+
+#define ACPI_NUM_OWNERID_MASKS 8
+
/******************************************************************************
*
* ACPI Specification constants (Do not change unless the specification changes)
@@ -134,14 +133,11 @@
#define ACPI_METHOD_NUM_ARGS 7
#define ACPI_METHOD_MAX_ARG 6
-/* Maximum length of resulting string when converting from a buffer */
-
-#define ACPI_MAX_STRING_CONVERSION 200
-
-/* Length of _HID, _UID, and _CID values */
+/* Length of _HID, _UID, _CID, and UUID values */
#define ACPI_DEVICE_ID_LENGTH 0x09
#define ACPI_MAX_CID_LENGTH 48
+#define ACPI_UUID_LENGTH 16
/*
* Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG
diff --git a/include/acpi/acdebug.h b/include/acpi/acdebug.h
index 70ce3b4..d816709 100644
--- a/include/acpi/acdebug.h
+++ b/include/acpi/acdebug.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acdisasm.h b/include/acpi/acdisasm.h
index 3d96dcb..11a8fe3 100644
--- a/include/acpi/acdisasm.h
+++ b/include/acpi/acdisasm.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -57,26 +57,11 @@
};
extern struct acpi_external_list *acpi_gbl_external_list;
-extern const char *acpi_gbl_io_decode[2];
-extern const char *acpi_gbl_word_decode[4];
-extern const char *acpi_gbl_consume_decode[2];
-extern const char *acpi_gbl_min_decode[2];
-extern const char *acpi_gbl_max_decode[2];
-extern const char *acpi_gbl_DECdecode[2];
-extern const char *acpi_gbl_RNGdecode[4];
-extern const char *acpi_gbl_MEMdecode[4];
-extern const char *acpi_gbl_RWdecode[2];
-extern const char *acpi_gbl_irq_decode[2];
-extern const char *acpi_gbl_HEdecode[2];
-extern const char *acpi_gbl_LLdecode[2];
-extern const char *acpi_gbl_SHRdecode[2];
-extern const char *acpi_gbl_TYPdecode[4];
-extern const char *acpi_gbl_BMdecode[2];
-extern const char *acpi_gbl_SIZdecode[4];
-extern const char *acpi_gbl_TTPdecode[2];
-extern const char *acpi_gbl_MTPdecode[4];
-extern const char *acpi_gbl_TRSdecode[2];
+/* Strings used for decoding flags to ASL keywords */
+
+extern const char *acpi_gbl_word_decode[4];
+extern const char *acpi_gbl_irq_decode[2];
extern const char *acpi_gbl_lock_rule[ACPI_NUM_LOCK_RULES];
extern const char *acpi_gbl_access_types[ACPI_NUM_ACCESS_TYPES];
extern const char *acpi_gbl_update_rules[ACPI_NUM_UPDATE_RULES];
@@ -171,11 +156,19 @@
/*
* dmresrc
*/
-void
-acpi_dm_resource_descriptor(struct acpi_op_walk_info *info,
- u8 * byte_data, u32 byte_count);
+void acpi_dm_dump_integer8(u8 value, char *name);
-u8 acpi_dm_is_resource_descriptor(union acpi_parse_object *op);
+void acpi_dm_dump_integer16(u16 value, char *name);
+
+void acpi_dm_dump_integer32(u32 value, char *name);
+
+void acpi_dm_dump_integer64(u64 value, char *name);
+
+void
+acpi_dm_resource_template(struct acpi_op_walk_info *info,
+ u8 * byte_data, u32 byte_count);
+
+u8 acpi_dm_is_resource_template(union acpi_parse_object *op);
void acpi_dm_indent(u32 level);
@@ -187,73 +180,69 @@
* dmresrcl
*/
void
-acpi_dm_word_descriptor(struct asl_word_address_desc *resource,
- u32 length, u32 level);
+acpi_dm_word_descriptor(union aml_resource *resource, u32 length, u32 level);
void
-acpi_dm_dword_descriptor(struct asl_dword_address_desc *resource,
- u32 length, u32 level);
+acpi_dm_dword_descriptor(union aml_resource *resource, u32 length, u32 level);
void
-acpi_dm_extended_descriptor(struct asl_extended_address_desc *resource,
+acpi_dm_extended_descriptor(union aml_resource *resource,
u32 length, u32 level);
void
-acpi_dm_qword_descriptor(struct asl_qword_address_desc *resource,
- u32 length, u32 level);
+acpi_dm_qword_descriptor(union aml_resource *resource, u32 length, u32 level);
void
-acpi_dm_memory24_descriptor(struct asl_memory_24_desc *resource,
+acpi_dm_memory24_descriptor(union aml_resource *resource,
u32 length, u32 level);
void
-acpi_dm_memory32_descriptor(struct asl_memory_32_desc *resource,
+acpi_dm_memory32_descriptor(union aml_resource *resource,
u32 length, u32 level);
void
-acpi_dm_fixed_mem32_descriptor(struct asl_fixed_memory_32_desc *resource,
- u32 length, u32 level);
+acpi_dm_fixed_memory32_descriptor(union aml_resource *resource,
+ u32 length, u32 level);
void
-acpi_dm_generic_register_descriptor(struct asl_general_register_desc *resource,
+acpi_dm_generic_register_descriptor(union aml_resource *resource,
u32 length, u32 level);
void
-acpi_dm_interrupt_descriptor(struct asl_extended_xrupt_desc *resource,
+acpi_dm_interrupt_descriptor(union aml_resource *resource,
u32 length, u32 level);
void
-acpi_dm_vendor_large_descriptor(struct asl_large_vendor_desc *resource,
+acpi_dm_vendor_large_descriptor(union aml_resource *resource,
u32 length, u32 level);
+void acpi_dm_vendor_common(char *name, u8 * byte_data, u32 length, u32 level);
+
/*
* dmresrcs
*/
void
-acpi_dm_irq_descriptor(struct asl_irq_format_desc *resource,
- u32 length, u32 level);
+acpi_dm_irq_descriptor(union aml_resource *resource, u32 length, u32 level);
void
-acpi_dm_dma_descriptor(struct asl_dma_format_desc *resource,
- u32 length, u32 level);
+acpi_dm_dma_descriptor(union aml_resource *resource, u32 length, u32 level);
+
+void acpi_dm_io_descriptor(union aml_resource *resource, u32 length, u32 level);
void
-acpi_dm_io_descriptor(struct asl_io_port_desc *resource, u32 length, u32 level);
-
-void
-acpi_dm_fixed_io_descriptor(struct asl_fixed_io_port_desc *resource,
+acpi_dm_fixed_io_descriptor(union aml_resource *resource,
u32 length, u32 level);
void
-acpi_dm_start_dependent_descriptor(struct asl_start_dependent_desc *resource,
+acpi_dm_start_dependent_descriptor(union aml_resource *resource,
u32 length, u32 level);
void
-acpi_dm_end_dependent_descriptor(struct asl_start_dependent_desc *resource,
+acpi_dm_end_dependent_descriptor(union aml_resource *resource,
u32 length, u32 level);
void
-acpi_dm_vendor_small_descriptor(struct asl_small_vendor_desc *resource,
+acpi_dm_vendor_small_descriptor(union aml_resource *resource,
u32 length, u32 level);
/*
diff --git a/include/acpi/acdispat.h b/include/acpi/acdispat.h
index 065f24a..c41a926 100644
--- a/include/acpi/acdispat.h
+++ b/include/acpi/acdispat.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -201,6 +201,9 @@
union acpi_operand_object *obj_desc,
struct acpi_namespace_node *calling_method_node);
+acpi_status
+acpi_ds_method_error(acpi_status status, struct acpi_walk_state *walk_state);
+
/*
* dsinit
*/
diff --git a/include/acpi/acevents.h b/include/acpi/acevents.h
index bfa5460..f2717be 100644
--- a/include/acpi/acevents.h
+++ b/include/acpi/acevents.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -51,6 +51,8 @@
acpi_status acpi_ev_install_xrupt_handlers(void);
+acpi_status acpi_ev_install_fadt_gpes(void);
+
u32 acpi_ev_fixed_event_detect(void);
/*
@@ -105,6 +107,10 @@
u32 interrupt_number,
struct acpi_gpe_block_info **return_gpe_block);
+acpi_status
+acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
+ struct acpi_gpe_block_info *gpe_block);
+
acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block);
u32
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index 4f005eb..dc768aa 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h
index 4ab2ca1..734cc77 100644
--- a/include/acpi/acglobal.h
+++ b/include/acpi/acglobal.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -80,6 +80,15 @@
extern u32 acpi_gbl_nesting_level;
+/* Support for dynamic control method tracing mechanism */
+
+ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
+ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
+ACPI_EXTERN acpi_name acpi_gbl_trace_method_name;
+ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
+ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
+ACPI_EXTERN u32 acpi_gbl_trace_flags;
+
/*****************************************************************************
*
* Runtime configuration (static defaults that can be overriden at runtime)
@@ -89,11 +98,15 @@
/*
* Enable "slack" in the AML interpreter? Default is FALSE, and the
* interpreter strictly follows the ACPI specification. Setting to TRUE
- * allows the interpreter to forgive certain bad AML constructs. Currently:
+ * allows the interpreter to ignore certain errors and/or bad AML constructs.
+ *
+ * Currently, these features are enabled by this flag:
+ *
* 1) Allow "implicit return" of last value in a control method
- * 2) Allow access beyond end of operation region
+ * 2) Allow access beyond the end of an operation region
* 3) Allow access to uninitialized locals/args (auto-init to integer 0)
* 4) Allow ANY object type to be a source operand for the Store() operator
+ * 5) Allow unresolved references (invalid target name) in package objects
*/
ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_enable_interpreter_slack, FALSE);
@@ -211,9 +224,11 @@
ACPI_EXTERN u32 acpi_gbl_rsdp_original_location;
ACPI_EXTERN u32 acpi_gbl_ns_lookup_count;
ACPI_EXTERN u32 acpi_gbl_ps_find_count;
-ACPI_EXTERN u64 acpi_gbl_owner_id_mask;
+ACPI_EXTERN u32 acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS];
ACPI_EXTERN u16 acpi_gbl_pm1_enable_register_save;
ACPI_EXTERN u16 acpi_gbl_global_lock_handle;
+ACPI_EXTERN u8 acpi_gbl_last_owner_id_index;
+ACPI_EXTERN u8 acpi_gbl_next_owner_id_offset;
ACPI_EXTERN u8 acpi_gbl_debugger_configuration;
ACPI_EXTERN u8 acpi_gbl_global_lock_acquired;
ACPI_EXTERN u8 acpi_gbl_step_to_next_call;
diff --git a/include/acpi/achware.h b/include/acpi/achware.h
index 3644d72..29b60a8 100644
--- a/include/acpi/achware.h
+++ b/include/acpi/achware.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acinterp.h b/include/acpi/acinterp.h
index 2c9c1a1..9f22cfc 100644
--- a/include/acpi/acinterp.h
+++ b/include/acpi/acinterp.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -44,7 +44,49 @@
#ifndef __ACINTERP_H__
#define __ACINTERP_H__
-#define ACPI_WALK_OPERANDS (&(walk_state->operands [walk_state->num_operands -1]))
+#define ACPI_WALK_OPERANDS (&(walk_state->operands [walk_state->num_operands -1]))
+
+/* Macros for tables used for debug output */
+
+#define ACPI_EXD_OFFSET(f) (u8) ACPI_OFFSET (union acpi_operand_object,f)
+#define ACPI_EXD_NSOFFSET(f) (u8) ACPI_OFFSET (struct acpi_namespace_node,f)
+#define ACPI_EXD_TABLE_SIZE(name) (sizeof(name) / sizeof (struct acpi_exdump_info))
+
+/*
+ * If possible, pack the following structure to byte alignment, since we
+ * don't care about performance for debug output
+ */
+#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
+#pragma pack(1)
+#endif
+
+typedef const struct acpi_exdump_info {
+ u8 opcode;
+ u8 offset;
+ char *name;
+
+} acpi_exdump_info;
+
+/* Values for the Opcode field above */
+
+#define ACPI_EXD_INIT 0
+#define ACPI_EXD_TYPE 1
+#define ACPI_EXD_UINT8 2
+#define ACPI_EXD_UINT16 3
+#define ACPI_EXD_UINT32 4
+#define ACPI_EXD_UINT64 5
+#define ACPI_EXD_LITERAL 6
+#define ACPI_EXD_POINTER 7
+#define ACPI_EXD_ADDRESS 8
+#define ACPI_EXD_STRING 9
+#define ACPI_EXD_BUFFER 10
+#define ACPI_EXD_PACKAGE 11
+#define ACPI_EXD_FIELD 12
+#define ACPI_EXD_REFERENCE 13
+
+/* restore default alignment */
+
+#pragma pack()
/*
* exconvrt - object conversion
@@ -327,7 +369,7 @@
void
acpi_ex_dump_object_descriptor(union acpi_operand_object *object, u32 flags);
-void acpi_ex_dump_node(struct acpi_namespace_node *node, u32 flags);
+void acpi_ex_dump_namespace_node(struct acpi_namespace_node *node, u32 flags);
#endif /* ACPI_FUTURE_USAGE */
/*
diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h
index 9fba0fd..8361820 100644
--- a/include/acpi/aclocal.h
+++ b/include/acpi/aclocal.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -276,6 +276,37 @@
u8 field_type;
};
+/*
+ * Bitmapped ACPI types. Used internally only
+ */
+#define ACPI_BTYPE_ANY 0x00000000
+#define ACPI_BTYPE_INTEGER 0x00000001
+#define ACPI_BTYPE_STRING 0x00000002
+#define ACPI_BTYPE_BUFFER 0x00000004
+#define ACPI_BTYPE_PACKAGE 0x00000008
+#define ACPI_BTYPE_FIELD_UNIT 0x00000010
+#define ACPI_BTYPE_DEVICE 0x00000020
+#define ACPI_BTYPE_EVENT 0x00000040
+#define ACPI_BTYPE_METHOD 0x00000080
+#define ACPI_BTYPE_MUTEX 0x00000100
+#define ACPI_BTYPE_REGION 0x00000200
+#define ACPI_BTYPE_POWER 0x00000400
+#define ACPI_BTYPE_PROCESSOR 0x00000800
+#define ACPI_BTYPE_THERMAL 0x00001000
+#define ACPI_BTYPE_BUFFER_FIELD 0x00002000
+#define ACPI_BTYPE_DDB_HANDLE 0x00004000
+#define ACPI_BTYPE_DEBUG_OBJECT 0x00008000
+#define ACPI_BTYPE_REFERENCE 0x00010000
+#define ACPI_BTYPE_RESOURCE 0x00020000
+
+#define ACPI_BTYPE_COMPUTE_DATA (ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING | ACPI_BTYPE_BUFFER)
+
+#define ACPI_BTYPE_DATA (ACPI_BTYPE_COMPUTE_DATA | ACPI_BTYPE_PACKAGE)
+#define ACPI_BTYPE_DATA_REFERENCE (ACPI_BTYPE_DATA | ACPI_BTYPE_REFERENCE | ACPI_BTYPE_DDB_HANDLE)
+#define ACPI_BTYPE_DEVICE_OBJECTS (ACPI_BTYPE_DEVICE | ACPI_BTYPE_THERMAL | ACPI_BTYPE_PROCESSOR)
+#define ACPI_BTYPE_OBJECTS_AND_REFS 0x0001FFFF /* ARG or LOCAL */
+#define ACPI_BTYPE_ALL_OBJECTS 0x0000FFFF
+
/*****************************************************************************
*
* Event typedefs and structs
@@ -385,13 +416,13 @@
#define ACPI_CONTROL_PREDICATE_FALSE 0xC3
#define ACPI_CONTROL_PREDICATE_TRUE 0xC4
-#define ACPI_STATE_COMMON /* Two 32-bit fields and a pointer */\
- u8 data_type; /* To differentiate various internal objs */\
+#define ACPI_STATE_COMMON /* Two 32-bit fields and a pointer */\
+ u8 data_type; /* To differentiate various internal objs */\
u8 flags; \
u16 value; \
u16 state; \
u16 reserved; \
- void *next; \
+ void *next;
struct acpi_common_state {
ACPI_STATE_COMMON};
@@ -544,8 +575,7 @@
char aml_op_name[16]) /* Op name (debug only) */\
/* NON-DEBUG members below: */\
struct acpi_namespace_node *node; /* For use by interpreter */\
- union acpi_parse_value value; /* Value or args associated with the opcode */\
-
+ union acpi_parse_value value; /* Value or args associated with the opcode */
#define ACPI_DASM_BUFFER 0x00
#define ACPI_DASM_RESOURCE 0x01
@@ -573,6 +603,8 @@
/* The parse node is the fundamental element of the parse tree */
+#define ACPI_MAX_PARSEOP_NAME 20
+
struct acpi_parse_obj_asl {
ACPI_PARSE_COMMON union acpi_parse_object *child;
union acpi_parse_object *parent_method;
@@ -597,7 +629,7 @@
u8 aml_opcode_length;
u8 aml_pkg_len_bytes;
u8 extra;
- char parse_op_name[12];
+ char parse_op_name[ACPI_MAX_PARSEOP_NAME];
};
union acpi_parse_object {
@@ -735,44 +767,52 @@
/* resource_type values */
-#define ACPI_RESOURCE_TYPE_MEMORY_RANGE 0
-#define ACPI_RESOURCE_TYPE_IO_RANGE 1
-#define ACPI_RESOURCE_TYPE_BUS_NUMBER_RANGE 2
+#define ACPI_ADDRESS_TYPE_MEMORY_RANGE 0
+#define ACPI_ADDRESS_TYPE_IO_RANGE 1
+#define ACPI_ADDRESS_TYPE_BUS_NUMBER_RANGE 2
/* Resource descriptor types and masks */
-#define ACPI_RDESC_TYPE_LARGE 0x80
-#define ACPI_RDESC_TYPE_SMALL 0x00
+#define ACPI_RESOURCE_NAME_LARGE 0x80
+#define ACPI_RESOURCE_NAME_SMALL 0x00
-#define ACPI_RDESC_TYPE_MASK 0x80
-#define ACPI_RDESC_SMALL_MASK 0x78 /* Only bits 6:3 contain the type */
+#define ACPI_RESOURCE_NAME_SMALL_MASK 0x78 /* Bits 6:3 contain the type */
+#define ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK 0x07 /* Bits 2:0 contain the length */
+#define ACPI_RESOURCE_NAME_LARGE_MASK 0x7F /* Bits 6:0 contain the type */
/*
- * Small resource descriptor types
- * Note: The 3 length bits (2:0) must be zero
+ * Small resource descriptor "names" as defined by the ACPI specification.
+ * Note: Bits 2:0 are used for the descriptor length
*/
-#define ACPI_RDESC_TYPE_IRQ_FORMAT 0x20
-#define ACPI_RDESC_TYPE_DMA_FORMAT 0x28
-#define ACPI_RDESC_TYPE_START_DEPENDENT 0x30
-#define ACPI_RDESC_TYPE_END_DEPENDENT 0x38
-#define ACPI_RDESC_TYPE_IO_PORT 0x40
-#define ACPI_RDESC_TYPE_FIXED_IO_PORT 0x48
-#define ACPI_RDESC_TYPE_SMALL_VENDOR 0x70
-#define ACPI_RDESC_TYPE_END_TAG 0x78
+#define ACPI_RESOURCE_NAME_IRQ 0x20
+#define ACPI_RESOURCE_NAME_DMA 0x28
+#define ACPI_RESOURCE_NAME_START_DEPENDENT 0x30
+#define ACPI_RESOURCE_NAME_END_DEPENDENT 0x38
+#define ACPI_RESOURCE_NAME_IO 0x40
+#define ACPI_RESOURCE_NAME_FIXED_IO 0x48
+#define ACPI_RESOURCE_NAME_RESERVED_S1 0x50
+#define ACPI_RESOURCE_NAME_RESERVED_S2 0x58
+#define ACPI_RESOURCE_NAME_RESERVED_S3 0x60
+#define ACPI_RESOURCE_NAME_RESERVED_S4 0x68
+#define ACPI_RESOURCE_NAME_VENDOR_SMALL 0x70
+#define ACPI_RESOURCE_NAME_END_TAG 0x78
/*
- * Large resource descriptor types
+ * Large resource descriptor "names" as defined by the ACPI specification.
+ * Note: includes the Large Descriptor bit in bit[7]
*/
-#define ACPI_RDESC_TYPE_MEMORY_24 0x81
-#define ACPI_RDESC_TYPE_GENERAL_REGISTER 0x82
-#define ACPI_RDESC_TYPE_LARGE_VENDOR 0x84
-#define ACPI_RDESC_TYPE_MEMORY_32 0x85
-#define ACPI_RDESC_TYPE_FIXED_MEMORY_32 0x86
-#define ACPI_RDESC_TYPE_DWORD_ADDRESS_SPACE 0x87
-#define ACPI_RDESC_TYPE_WORD_ADDRESS_SPACE 0x88
-#define ACPI_RDESC_TYPE_EXTENDED_XRUPT 0x89
-#define ACPI_RDESC_TYPE_QWORD_ADDRESS_SPACE 0x8A
-#define ACPI_RDESC_TYPE_EXTENDED_ADDRESS_SPACE 0x8B
+#define ACPI_RESOURCE_NAME_MEMORY24 0x81
+#define ACPI_RESOURCE_NAME_GENERIC_REGISTER 0x82
+#define ACPI_RESOURCE_NAME_RESERVED_L1 0x83
+#define ACPI_RESOURCE_NAME_VENDOR_LARGE 0x84
+#define ACPI_RESOURCE_NAME_MEMORY32 0x85
+#define ACPI_RESOURCE_NAME_FIXED_MEMORY32 0x86
+#define ACPI_RESOURCE_NAME_ADDRESS32 0x87
+#define ACPI_RESOURCE_NAME_ADDRESS16 0x88
+#define ACPI_RESOURCE_NAME_EXTENDED_IRQ 0x89
+#define ACPI_RESOURCE_NAME_ADDRESS64 0x8A
+#define ACPI_RESOURCE_NAME_EXTENDED_ADDRESS64 0x8B
+#define ACPI_RESOURCE_NAME_LARGE_MAX 0x8B
/*****************************************************************************
*
@@ -780,7 +820,7 @@
*
****************************************************************************/
-#define ACPI_ASCII_ZERO 0x30
+#define ACPI_ASCII_ZERO 0x30
/*****************************************************************************
*
diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h
index 702cc4e..f2be2a8 100644
--- a/include/acpi/acmacros.h
+++ b/include/acpi/acmacros.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -60,7 +60,7 @@
/*
* For 16-bit addresses, we have to assume that the upper 32 bits
- * are zero.
+ * (out of 64) are zero.
*/
#define ACPI_LODWORD(l) ((u32)(l))
#define ACPI_HIDWORD(l) ((u32)(0))
@@ -104,30 +104,38 @@
#define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i),ACPI_LODWORD(i)
/*
- * Extract a byte of data using a pointer. Any more than a byte and we
- * get into potential aligment issues -- see the STORE macros below
+ * Extract data using a pointer. Any more than a byte and we
+ * get into potential aligment issues -- see the STORE macros below.
+ * Use with care.
*/
-#define ACPI_GET8(addr) (*(u8*)(addr))
+#define ACPI_GET8(ptr) *ACPI_CAST_PTR (u8, ptr)
+#define ACPI_GET16(ptr) *ACPI_CAST_PTR (u16, ptr)
+#define ACPI_GET32(ptr) *ACPI_CAST_PTR (u32, ptr)
+#define ACPI_GET64(ptr) *ACPI_CAST_PTR (u64, ptr)
+#define ACPI_SET8(ptr) *ACPI_CAST_PTR (u8, ptr)
+#define ACPI_SET16(ptr) *ACPI_CAST_PTR (u16, ptr)
+#define ACPI_SET32(ptr) *ACPI_CAST_PTR (u32, ptr)
+#define ACPI_SET64(ptr) *ACPI_CAST_PTR (u64, ptr)
-/* Pointer arithmetic */
-
-#define ACPI_PTR_ADD(t,a,b) (t *) (void *)((char *)(a) + (acpi_native_uint)(b))
-#define ACPI_PTR_DIFF(a,b) (acpi_native_uint) ((char *)(a) - (char *)(b))
+/*
+ * Pointer manipulation
+ */
+#define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p))
+#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p))
+#define ACPI_ADD_PTR(t,a,b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8,(a)) + (acpi_native_uint)(b)))
+#define ACPI_PTR_DIFF(a,b) (acpi_native_uint) (ACPI_CAST_PTR (u8,(a)) - ACPI_CAST_PTR (u8,(b)))
/* Pointer/Integer type conversions */
-#define ACPI_TO_POINTER(i) ACPI_PTR_ADD (void, (void *) NULL,(acpi_native_uint)i)
+#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void,(void *) NULL,(acpi_native_uint) i)
#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p,(void *) NULL)
#define ACPI_OFFSET(d,f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL)
#define ACPI_FADT_OFFSET(f) ACPI_OFFSET (FADT_DESCRIPTOR, f)
-#define ACPI_CAST_PTR(t, p) ((t *)(void *)(p))
-#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **)(void *)(p))
-
#if ACPI_MACHINE_WIDTH == 16
#define ACPI_STORE_POINTER(d,s) ACPI_MOVE_32_TO_32(d,s)
#define ACPI_PHYSADDR_TO_PTR(i) (void *)(i)
-#define ACPI_PTR_TO_PHYSADDR(i) (u32) (char *)(i)
+#define ACPI_PTR_TO_PHYSADDR(i) (u32) ACPI_CAST_PTR (u8,(i))
#else
#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i)
#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i)
@@ -202,7 +210,7 @@
#define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) (buf_offset)
-#ifdef ACPI_MISALIGNED_TRANSFERS
+#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
/* The hardware supports unaligned transfers, just do the little-endian move */
@@ -326,11 +334,19 @@
#define ACPI_MUL_16(a) _ACPI_MUL(a,4)
#define ACPI_MOD_16(a) _ACPI_MOD(a,16)
+#define ACPI_DIV_32(a) _ACPI_DIV(a,5)
+#define ACPI_MUL_32(a) _ACPI_MUL(a,5)
+#define ACPI_MOD_32(a) _ACPI_MOD(a,32)
+
/*
* Rounding macros (Power of two boundaries only)
*/
-#define ACPI_ROUND_DOWN(value,boundary) (((acpi_native_uint)(value)) & (~(((acpi_native_uint) boundary)-1)))
-#define ACPI_ROUND_UP(value,boundary) ((((acpi_native_uint)(value)) + (((acpi_native_uint) boundary)-1)) & (~(((acpi_native_uint) boundary)-1)))
+#define ACPI_ROUND_DOWN(value,boundary) (((acpi_native_uint)(value)) & \
+ (~(((acpi_native_uint) boundary)-1)))
+
+#define ACPI_ROUND_UP(value,boundary) ((((acpi_native_uint)(value)) + \
+ (((acpi_native_uint) boundary)-1)) & \
+ (~(((acpi_native_uint) boundary)-1)))
#define ACPI_ROUND_DOWN_TO_32_BITS(a) ACPI_ROUND_DOWN(a,4)
#define ACPI_ROUND_DOWN_TO_64_BITS(a) ACPI_ROUND_DOWN(a,8)
@@ -365,6 +381,14 @@
#define ACPI_REGISTER_PREPARE_BITS(val, pos, mask) ((val << pos) & mask)
#define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val) reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask)
+/* Generate a UUID */
+
+#define ACPI_INIT_UUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) \
+ (a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \
+ (b) & 0xFF, ((b) >> 8) & 0xFF, \
+ (c) & 0xFF, ((c) >> 8) & 0xFF, \
+ (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7)
+
/*
* An struct acpi_namespace_node * can appear in some contexts,
* where a pointer to an union acpi_operand_object can also
@@ -423,57 +447,52 @@
#define GET_CURRENT_ARG_TYPE(list) (list & ((u32) 0x1F))
#define INCREMENT_ARG_LIST(list) (list >>= ((u32) ARG_TYPE_WIDTH))
+#if defined (ACPI_DEBUG_OUTPUT) || !defined (ACPI_NO_ERROR_MESSAGES)
/*
- * Reporting macros that are never compiled out
+ * Module name is include in both debug and non-debug versions primarily for
+ * error messages. The __FILE__ macro is not very useful for this, because it
+ * often includes the entire pathname to the module
*/
-#define ACPI_PARAM_LIST(pl) pl
+#define ACPI_MODULE_NAME(name) static char ACPI_UNUSED_VAR *_acpi_module_name = name;
+#else
+#define ACPI_MODULE_NAME(name)
+#endif
/*
- * Error reporting. These versions add callers module and line#.
- *
- * Since _acpi_module_name gets compiled out when ACPI_DEBUG_OUTPUT
- * isn't defined, only use it in debug mode.
+ * Ascii error messages can be configured out
*/
-#ifdef ACPI_DEBUG_OUTPUT
+#ifndef ACPI_NO_ERROR_MESSAGES
+#define AE_INFO _acpi_module_name, __LINE__
-#define ACPI_REPORT_INFO(fp) {acpi_ut_report_info(_acpi_module_name,__LINE__,_COMPONENT); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define ACPI_REPORT_ERROR(fp) {acpi_ut_report_error(_acpi_module_name,__LINE__,_COMPONENT); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define ACPI_REPORT_WARNING(fp) {acpi_ut_report_warning(_acpi_module_name,__LINE__,_COMPONENT); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define ACPI_REPORT_NSERROR(s,e) acpi_ns_report_error(_acpi_module_name,__LINE__,_COMPONENT, s, e);
-
-#define ACPI_REPORT_METHOD_ERROR(s,n,p,e) acpi_ns_report_method_error(_acpi_module_name,__LINE__,_COMPONENT, s, n, p, e);
+/*
+ * Error reporting. Callers module and line number are inserted by AE_INFO,
+ * the plist contains a set of parens to allow variable-length lists.
+ * These macros are used for both the debug and non-debug versions of the code.
+ */
+#define ACPI_INFO(plist) acpi_ut_info plist
+#define ACPI_WARNING(plist) acpi_ut_warning plist
+#define ACPI_EXCEPTION(plist) acpi_ut_exception plist
+#define ACPI_ERROR(plist) acpi_ut_error plist
+#define ACPI_ERROR_NAMESPACE(s,e) acpi_ns_report_error (AE_INFO, s, e);
+#define ACPI_ERROR_METHOD(s,n,p,e) acpi_ns_report_method_error (AE_INFO, s, n, p, e);
#else
-#define ACPI_REPORT_INFO(fp) {acpi_ut_report_info("ACPI",__LINE__,_COMPONENT); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define ACPI_REPORT_ERROR(fp) {acpi_ut_report_error("ACPI",__LINE__,_COMPONENT); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define ACPI_REPORT_WARNING(fp) {acpi_ut_report_warning("ACPI",__LINE__,_COMPONENT); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define ACPI_REPORT_NSERROR(s,e) acpi_ns_report_error("ACPI",__LINE__,_COMPONENT, s, e);
+/* No error messages */
-#define ACPI_REPORT_METHOD_ERROR(s,n,p,e) acpi_ns_report_method_error("ACPI",__LINE__,_COMPONENT, s, n, p, e);
+#define ACPI_INFO(plist)
+#define ACPI_WARNING(plist)
+#define ACPI_EXCEPTION(plist)
+#define ACPI_ERROR(plist)
+#define ACPI_ERROR_NAMESPACE(s,e)
+#define ACPI_ERROR_METHOD(s,n,p,e)
#endif
-/* Error reporting. These versions pass thru the module and line# */
-
-#define _ACPI_REPORT_INFO(a,b,c,fp) {acpi_ut_report_info(a,b,c); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define _ACPI_REPORT_ERROR(a,b,c,fp) {acpi_ut_report_error(a,b,c); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define _ACPI_REPORT_WARNING(a,b,c,fp) {acpi_ut_report_warning(a,b,c); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-
/*
* Debug macros that are conditionally compiled
*/
#ifdef ACPI_DEBUG_OUTPUT
-#define ACPI_MODULE_NAME(name) static char ACPI_UNUSED_VAR *_acpi_module_name = name;
/*
* Common parameters used for debug output functions:
@@ -509,7 +528,7 @@
#endif
#define ACPI_FUNCTION_TRACE(a) ACPI_FUNCTION_NAME(a) \
- acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
+ acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
#define ACPI_FUNCTION_TRACE_PTR(a,b) ACPI_FUNCTION_NAME(a) \
acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS,(void *)b)
#define ACPI_FUNCTION_TRACE_U32(a,b) ACPI_FUNCTION_NAME(a) \
@@ -525,6 +544,9 @@
* bad form, but having a separate exit macro is very ugly and difficult to maintain.
* One of the FUNCTION_TRACE macros above must be used in conjunction with these macros
* so that "_acpi_function_name" is defined.
+ *
+ * Note: the DO_WHILE0 macro is used to prevent some compilers from complaining
+ * about these constructs.
*/
#ifdef ACPI_USE_DO_WHILE_0
#define ACPI_DO_WHILE0(a) do a while(0)
@@ -532,10 +554,55 @@
#define ACPI_DO_WHILE0(a) a
#endif
-#define return_VOID ACPI_DO_WHILE0 ({acpi_ut_exit(ACPI_DEBUG_PARAMETERS);return;})
-#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({acpi_ut_status_exit(ACPI_DEBUG_PARAMETERS,(s));return((s));})
-#define return_VALUE(s) ACPI_DO_WHILE0 ({acpi_ut_value_exit(ACPI_DEBUG_PARAMETERS,(acpi_integer)(s));return((s));})
-#define return_PTR(s) ACPI_DO_WHILE0 ({acpi_ut_ptr_exit(ACPI_DEBUG_PARAMETERS,(u8 *)(s));return((s));})
+#define return_VOID ACPI_DO_WHILE0 ({ \
+ acpi_ut_exit (ACPI_DEBUG_PARAMETERS); \
+ return;})
+/*
+ * There are two versions of most of the return macros. The default version is
+ * safer, since it avoids side-effects by guaranteeing that the argument will
+ * not be evaluated twice.
+ *
+ * A less-safe version of the macros is provided for optional use if the
+ * compiler uses excessive CPU stack (for example, this may happen in the
+ * debug case if code optimzation is disabled.)
+ */
+#ifndef ACPI_SIMPLE_RETURN_MACROS
+
+#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({ \
+ register acpi_status _s = (s); \
+ acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, _s); \
+ return (_s); })
+#define return_PTR(s) ACPI_DO_WHILE0 ({ \
+ register void *_s = (void *) (s); \
+ acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) _s); \
+ return (_s); })
+#define return_VALUE(s) ACPI_DO_WHILE0 ({ \
+ register acpi_integer _s = (s); \
+ acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, _s); \
+ return (_s); })
+#define return_UINT8(s) ACPI_DO_WHILE0 ({ \
+ register u8 _s = (u8) (s); \
+ acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \
+ return (_s); })
+#define return_UINT32(s) ACPI_DO_WHILE0 ({ \
+ register u32 _s = (u32) (s); \
+ acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \
+ return (_s); })
+#else /* Use original less-safe macros */
+
+#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({ \
+ acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, (s)); \
+ return((s)); })
+#define return_PTR(s) ACPI_DO_WHILE0 ({ \
+ acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) (s)); \
+ return((s)); })
+#define return_VALUE(s) ACPI_DO_WHILE0 ({ \
+ acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) (s)); \
+ return((s)); })
+#define return_UINT8(s) return_VALUE(s)
+#define return_UINT32(s) return_VALUE(s)
+
+#endif /* ACPI_SIMPLE_RETURN_MACROS */
/* Conditional execution */
@@ -555,18 +622,6 @@
#define ACPI_DUMP_PATHNAME(a,b,c,d) acpi_ns_dump_pathname(a,b,c,d)
#define ACPI_DUMP_RESOURCE_LIST(a) acpi_rs_dump_resource_list(a)
#define ACPI_DUMP_BUFFER(a,b) acpi_ut_dump_buffer((u8 *)a,b,DB_BYTE_DISPLAY,_COMPONENT)
-#define ACPI_BREAK_MSG(a) acpi_os_signal (ACPI_SIGNAL_BREAKPOINT,(a))
-
-/*
- * Generate INT3 on ACPI_ERROR (Debug only!)
- */
-#define ACPI_ERROR_BREAK
-#ifdef ACPI_ERROR_BREAK
-#define ACPI_BREAK_ON_ERROR(lvl) if ((lvl)&ACPI_ERROR) \
- acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,"Fatal error encountered\n")
-#else
-#define ACPI_BREAK_ON_ERROR(lvl)
-#endif
/*
* Master debug print macros
@@ -574,17 +629,14 @@
* 1) Debug print for the current component is enabled
* 2) Debug error level or trace level for the print statement is enabled
*/
-#define ACPI_DEBUG_PRINT(pl) acpi_ut_debug_print ACPI_PARAM_LIST(pl)
-#define ACPI_DEBUG_PRINT_RAW(pl) acpi_ut_debug_print_raw ACPI_PARAM_LIST(pl)
+#define ACPI_DEBUG_PRINT(plist) acpi_ut_debug_print plist
+#define ACPI_DEBUG_PRINT_RAW(plist) acpi_ut_debug_print_raw plist
#else
/*
* This is the non-debug case -- make everything go away,
* leaving no executable debug code!
*/
-#define ACPI_MODULE_NAME(name)
-#define _acpi_module_name ""
-
#define ACPI_DEBUG_EXEC(a)
#define ACPI_NORMAL_EXEC(a) a;
@@ -607,11 +659,12 @@
#define ACPI_DUMP_BUFFER(a,b)
#define ACPI_DEBUG_PRINT(pl)
#define ACPI_DEBUG_PRINT_RAW(pl)
-#define ACPI_BREAK_MSG(a)
#define return_VOID return
#define return_ACPI_STATUS(s) return(s)
#define return_VALUE(s) return(s)
+#define return_UINT8(s) return(s)
+#define return_UINT32(s) return(s)
#define return_PTR(s) return(s)
#endif
diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h
index 4f9063f..b67da36 100644
--- a/include/acpi/acnames.h
+++ b/include/acpi/acnames.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acnamesp.h b/include/acpi/acnamesp.h
index dd3501f..b667a80 100644
--- a/include/acpi/acnamesp.h
+++ b/include/acpi/acnamesp.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -263,13 +263,11 @@
void
acpi_ns_report_error(char *module_name,
u32 line_number,
- u32 component_id,
char *internal_name, acpi_status lookup_status);
void
acpi_ns_report_method_error(char *module_name,
u32 line_number,
- u32 component_id,
char *message,
struct acpi_namespace_node *node,
char *path, acpi_status lookup_status);
diff --git a/include/acpi/acobject.h b/include/acpi/acobject.h
index 4a326ba..d130cfe 100644
--- a/include/acpi/acobject.h
+++ b/include/acpi/acobject.h
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -69,7 +69,7 @@
u8 type; /* acpi_object_type */\
u16 reference_count; /* For object deletion management */\
union acpi_operand_object *next_object; /* Objects linked to parent NS node */\
- u8 flags; \
+ u8 flags;
/* Values for flag byte above */
diff --git a/include/acpi/acopcode.h b/include/acpi/acopcode.h
index 64da429..e6d78bd 100644
--- a/include/acpi/acopcode.h
+++ b/include/acpi/acopcode.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h
index 68d7edf0..7785d48 100644
--- a/include/acpi/acoutput.h
+++ b/include/acpi/acoutput.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -137,13 +137,19 @@
/* Exception level -- used in the global "debug_level" */
-#define ACPI_DB_ERROR ACPI_DEBUG_LEVEL (ACPI_LV_ERROR)
-#define ACPI_DB_WARN ACPI_DEBUG_LEVEL (ACPI_LV_WARN)
#define ACPI_DB_INIT ACPI_DEBUG_LEVEL (ACPI_LV_INIT)
#define ACPI_DB_DEBUG_OBJECT ACPI_DEBUG_LEVEL (ACPI_LV_DEBUG_OBJECT)
#define ACPI_DB_INFO ACPI_DEBUG_LEVEL (ACPI_LV_INFO)
#define ACPI_DB_ALL_EXCEPTIONS ACPI_DEBUG_LEVEL (ACPI_LV_ALL_EXCEPTIONS)
+/*
+ * These two levels are essentially obsolete, all instances in the
+ * ACPICA core code have been replaced by REPORT_ERROR and REPORT_WARNING
+ * (Kept here because some drivers may still use them)
+ */
+#define ACPI_DB_ERROR ACPI_DEBUG_LEVEL (ACPI_LV_ERROR)
+#define ACPI_DB_WARN ACPI_DEBUG_LEVEL (ACPI_LV_WARN)
+
/* Trace level -- also used in the global "debug_level" */
#define ACPI_DB_INIT_NAMES ACPI_DEBUG_LEVEL (ACPI_LV_INIT_NAMES)
diff --git a/include/acpi/acparser.h b/include/acpi/acparser.h
index d352d40..5a1ff484 100644
--- a/include/acpi/acparser.h
+++ b/include/acpi/acparser.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acpi.h b/include/acpi/acpi.h
index ccf34f9..b9a39d1 100644
--- a/include/acpi/acpi.h
+++ b/include/acpi/acpi.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index c1b4e1f..b425f9b 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -52,8 +52,8 @@
/* ACPI PCI Interrupt Link (pci_link.c) */
int acpi_irq_penalty_init(void);
-int acpi_pci_link_allocate_irq(acpi_handle handle, int index, int *edge_level,
- int *active_high_low, char **name);
+int acpi_pci_link_allocate_irq(acpi_handle handle, int index, int *triggering,
+ int *polarity, char **name);
int acpi_pci_link_free_irq(acpi_handle handle);
/* ACPI PCI Interrupt Routing (pci_irq.c) */
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index 98e0b8cd..970e9a6 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -8,7 +8,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -108,9 +108,9 @@
void acpi_os_delete_lock(acpi_handle handle);
-unsigned long acpi_os_acquire_lock(acpi_handle handle);
+acpi_cpu_flags acpi_os_acquire_lock(acpi_handle handle);
-void acpi_os_release_lock(acpi_handle handle, unsigned long flags);
+void acpi_os_release_lock(acpi_handle handle, acpi_cpu_flags flags);
/*
* Memory allocation and mapping
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 2a9dbc1..66cf2ec 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -149,6 +149,9 @@
acpi_status
acpi_get_data(acpi_handle obj_handle, acpi_object_handler handler, void **data);
+acpi_status
+acpi_debug_trace(char *name, u32 debug_level, u32 debug_layer, u32 flags);
+
/*
* Object manipulation and enumeration
*/
@@ -269,6 +272,12 @@
void *context);
acpi_status
+acpi_get_vendor_resource(acpi_handle device_handle,
+ char *name,
+ struct acpi_vendor_uuid *uuid,
+ struct acpi_buffer *ret_buffer);
+
+acpi_status
acpi_get_current_resources(acpi_handle device_handle,
struct acpi_buffer *ret_buffer);
@@ -280,7 +289,7 @@
acpi_status
acpi_walk_resources(acpi_handle device_handle,
- char *path,
+ char *name,
ACPI_WALK_RESOURCE_CALLBACK user_function, void *context);
acpi_status
diff --git a/include/acpi/acresrc.h b/include/acpi/acresrc.h
index 38e798b..fa02e80 100644
--- a/include/acpi/acresrc.h
+++ b/include/acpi/acresrc.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -44,8 +44,125 @@
#ifndef __ACRESRC_H__
#define __ACRESRC_H__
+/* Need the AML resource descriptor structs */
+
+#include "amlresrc.h"
+
/*
- * Function prototypes called from Acpi* APIs
+ * If possible, pack the following structures to byte alignment, since we
+ * don't care about performance for debug output
+ */
+#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
+#pragma pack(1)
+#endif
+
+/*
+ * Individual entry for the resource conversion tables
+ */
+typedef const struct acpi_rsconvert_info {
+ u8 opcode;
+ u8 resource_offset;
+ u8 aml_offset;
+ u8 value;
+
+} acpi_rsconvert_info;
+
+/* Resource conversion opcodes */
+
+#define ACPI_RSC_INITGET 0
+#define ACPI_RSC_INITSET 1
+#define ACPI_RSC_FLAGINIT 2
+#define ACPI_RSC_1BITFLAG 3
+#define ACPI_RSC_2BITFLAG 4
+#define ACPI_RSC_COUNT 5
+#define ACPI_RSC_COUNT16 6
+#define ACPI_RSC_LENGTH 7
+#define ACPI_RSC_MOVE8 8
+#define ACPI_RSC_MOVE16 9
+#define ACPI_RSC_MOVE32 10
+#define ACPI_RSC_MOVE64 11
+#define ACPI_RSC_SET8 12
+#define ACPI_RSC_DATA8 13
+#define ACPI_RSC_ADDRESS 14
+#define ACPI_RSC_SOURCE 15
+#define ACPI_RSC_SOURCEX 16
+#define ACPI_RSC_BITMASK 17
+#define ACPI_RSC_BITMASK16 18
+#define ACPI_RSC_EXIT_NE 19
+#define ACPI_RSC_EXIT_LE 20
+
+/* Resource Conversion sub-opcodes */
+
+#define ACPI_RSC_COMPARE_AML_LENGTH 0
+#define ACPI_RSC_COMPARE_VALUE 1
+
+#define ACPI_RSC_TABLE_SIZE(d) (sizeof (d) / sizeof (struct acpi_rsconvert_info))
+
+#define ACPI_RS_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_resource,f)
+#define AML_OFFSET(f) (u8) ACPI_OFFSET (union aml_resource,f)
+
+typedef const struct acpi_rsdump_info {
+ u8 opcode;
+ u8 offset;
+ char *name;
+ const char **pointer;
+
+} acpi_rsdump_info;
+
+/* Values for the Opcode field above */
+
+#define ACPI_RSD_TITLE 0
+#define ACPI_RSD_LITERAL 1
+#define ACPI_RSD_STRING 2
+#define ACPI_RSD_UINT8 3
+#define ACPI_RSD_UINT16 4
+#define ACPI_RSD_UINT32 5
+#define ACPI_RSD_UINT64 6
+#define ACPI_RSD_1BITFLAG 7
+#define ACPI_RSD_2BITFLAG 8
+#define ACPI_RSD_SHORTLIST 9
+#define ACPI_RSD_LONGLIST 10
+#define ACPI_RSD_DWORDLIST 11
+#define ACPI_RSD_ADDRESS 12
+#define ACPI_RSD_SOURCE 13
+
+/* restore default alignment */
+
+#pragma pack()
+
+/* Resource tables indexed by internal resource type */
+
+extern const u8 acpi_gbl_aml_resource_sizes[];
+extern struct acpi_rsconvert_info *acpi_gbl_set_resource_dispatch[];
+
+/* Resource tables indexed by raw AML resource descriptor type */
+
+extern const u8 acpi_gbl_resource_struct_sizes[];
+extern struct acpi_rsconvert_info *acpi_gbl_get_resource_dispatch[];
+
+struct acpi_vendor_walk_info {
+ struct acpi_vendor_uuid *uuid;
+ struct acpi_buffer *buffer;
+ acpi_status status;
+};
+
+/*
+ * rscreate
+ */
+acpi_status
+acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer,
+ struct acpi_buffer *output_buffer);
+
+acpi_status
+acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer,
+ struct acpi_buffer *output_buffer);
+
+acpi_status
+acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object,
+ struct acpi_buffer *output_buffer);
+
+/*
+ * rsutils
*/
acpi_status
acpi_rs_get_prt_method_data(acpi_handle handle, struct acpi_buffer *ret_buffer);
@@ -65,195 +182,146 @@
acpi_status
acpi_rs_set_srs_method_data(acpi_handle handle, struct acpi_buffer *ret_buffer);
-acpi_status
-acpi_rs_create_resource_list(union acpi_operand_object *byte_stream_buffer,
- struct acpi_buffer *output_buffer);
-
-acpi_status
-acpi_rs_create_byte_stream(struct acpi_resource *linked_list_buffer,
- struct acpi_buffer *output_buffer);
-
-acpi_status
-acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object,
- struct acpi_buffer *output_buffer);
-
-/*
- * rsdump
- */
-#ifdef ACPI_FUTURE_USAGE
-void acpi_rs_dump_resource_list(struct acpi_resource *resource);
-
-void acpi_rs_dump_irq_list(u8 * route_table);
-#endif /* ACPI_FUTURE_USAGE */
-
/*
* rscalc
*/
acpi_status
-acpi_rs_get_byte_stream_start(u8 * byte_stream_buffer,
- u8 ** byte_stream_start, u32 * size);
+acpi_rs_get_list_length(u8 * aml_buffer,
+ u32 aml_buffer_length, acpi_size * size_needed);
acpi_status
-acpi_rs_get_list_length(u8 * byte_stream_buffer,
- u32 byte_stream_buffer_length, acpi_size * size_needed);
-
-acpi_status
-acpi_rs_get_byte_stream_length(struct acpi_resource *linked_list_buffer,
- acpi_size * size_needed);
+acpi_rs_get_aml_length(struct acpi_resource *linked_list_buffer,
+ acpi_size * size_needed);
acpi_status
acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
acpi_size * buffer_size_needed);
acpi_status
-acpi_rs_byte_stream_to_list(u8 * byte_stream_buffer,
- u32 byte_stream_buffer_length, u8 * output_buffer);
+acpi_rs_convert_aml_to_resources(u8 * aml_buffer,
+ u32 aml_buffer_length, u8 * output_buffer);
acpi_status
-acpi_rs_list_to_byte_stream(struct acpi_resource *linked_list,
- acpi_size byte_stream_size_needed,
- u8 * output_buffer);
+acpi_rs_convert_resources_to_aml(struct acpi_resource *resource,
+ acpi_size aml_size_needed, u8 * output_buffer);
+
+/*
+ * rsaddr
+ */
+void
+acpi_rs_set_address_common(union aml_resource *aml,
+ struct acpi_resource *resource);
+
+u8
+acpi_rs_get_address_common(struct acpi_resource *resource,
+ union aml_resource *aml);
+
+/*
+ * rsmisc
+ */
+acpi_status
+acpi_rs_convert_aml_to_resource(struct acpi_resource *resource,
+ union aml_resource *aml,
+ struct acpi_rsconvert_info *info);
acpi_status
-acpi_rs_io_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size);
+acpi_rs_convert_resource_to_aml(struct acpi_resource *resource,
+ union aml_resource *aml,
+ struct acpi_rsconvert_info *info);
-acpi_status
-acpi_rs_fixed_io_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size);
+/*
+ * rsutils
+ */
+void
+acpi_rs_move_data(void *destination,
+ void *source, u16 item_count, u8 move_type);
-acpi_status
-acpi_rs_io_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed);
+u8 acpi_rs_decode_bitmask(u16 mask, u8 * list);
-acpi_status
-acpi_rs_fixed_io_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed);
+u16 acpi_rs_encode_bitmask(u8 * list, u8 count);
-acpi_status
-acpi_rs_irq_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size);
+acpi_rs_length
+acpi_rs_get_resource_source(acpi_rs_length resource_length,
+ acpi_rs_length minimum_length,
+ struct acpi_resource_source *resource_source,
+ union aml_resource *aml, char *string_ptr);
-acpi_status
-acpi_rs_irq_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed);
+acpi_rsdesc_size
+acpi_rs_set_resource_source(union aml_resource *aml,
+ acpi_rs_length minimum_length,
+ struct acpi_resource_source *resource_source);
-acpi_status
-acpi_rs_dma_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size);
+void
+acpi_rs_set_resource_header(u8 descriptor_type,
+ acpi_rsdesc_size total_length,
+ union aml_resource *aml);
-acpi_status
-acpi_rs_dma_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed);
+void
+acpi_rs_set_resource_length(acpi_rsdesc_size total_length,
+ union aml_resource *aml);
-acpi_status
-acpi_rs_address16_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size);
+/*
+ * rsdump
+ */
+void acpi_rs_dump_resource_list(struct acpi_resource *resource);
-acpi_status
-acpi_rs_address16_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed);
+void acpi_rs_dump_irq_list(u8 * route_table);
-acpi_status
-acpi_rs_address32_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size);
+/*
+ * Resource conversion tables
+ */
+extern struct acpi_rsconvert_info acpi_rs_convert_dma[];
+extern struct acpi_rsconvert_info acpi_rs_convert_end_dpf[];
+extern struct acpi_rsconvert_info acpi_rs_convert_io[];
+extern struct acpi_rsconvert_info acpi_rs_convert_fixed_io[];
+extern struct acpi_rsconvert_info acpi_rs_convert_end_tag[];
+extern struct acpi_rsconvert_info acpi_rs_convert_memory24[];
+extern struct acpi_rsconvert_info acpi_rs_convert_generic_reg[];
+extern struct acpi_rsconvert_info acpi_rs_convert_memory32[];
+extern struct acpi_rsconvert_info acpi_rs_convert_fixed_memory32[];
+extern struct acpi_rsconvert_info acpi_rs_convert_address32[];
+extern struct acpi_rsconvert_info acpi_rs_convert_address16[];
+extern struct acpi_rsconvert_info acpi_rs_convert_ext_irq[];
+extern struct acpi_rsconvert_info acpi_rs_convert_address64[];
+extern struct acpi_rsconvert_info acpi_rs_convert_ext_address64[];
-acpi_status
-acpi_rs_address32_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed);
+/* These resources require separate get/set tables */
-acpi_status
-acpi_rs_address64_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size);
+extern struct acpi_rsconvert_info acpi_rs_get_irq[];
+extern struct acpi_rsconvert_info acpi_rs_get_start_dpf[];
+extern struct acpi_rsconvert_info acpi_rs_get_vendor_small[];
+extern struct acpi_rsconvert_info acpi_rs_get_vendor_large[];
-acpi_status
-acpi_rs_address64_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed);
+extern struct acpi_rsconvert_info acpi_rs_set_irq[];
+extern struct acpi_rsconvert_info acpi_rs_set_start_dpf[];
+extern struct acpi_rsconvert_info acpi_rs_set_vendor[];
-acpi_status
-acpi_rs_start_depend_fns_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer,
- acpi_size * structure_size);
+#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
+/*
+ * rsinfo
+ */
+extern struct acpi_rsdump_info *acpi_gbl_dump_resource_dispatch[];
-acpi_status
-acpi_rs_end_depend_fns_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer,
- acpi_size * structure_size);
-
-acpi_status
-acpi_rs_start_depend_fns_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer,
- acpi_size * bytes_consumed);
-
-acpi_status
-acpi_rs_end_depend_fns_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed);
-
-acpi_status
-acpi_rs_memory24_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size);
-
-acpi_status
-acpi_rs_memory24_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed);
-
-acpi_status
-acpi_rs_memory32_range_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer,
- acpi_size * structure_size);
-
-acpi_status
-acpi_rs_fixed_memory32_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer,
- acpi_size * structure_size);
-
-acpi_status
-acpi_rs_memory32_range_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed);
-
-acpi_status
-acpi_rs_fixed_memory32_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed);
-
-acpi_status
-acpi_rs_extended_irq_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size);
-
-acpi_status
-acpi_rs_extended_irq_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed);
-
-acpi_status
-acpi_rs_end_tag_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size);
-
-acpi_status
-acpi_rs_end_tag_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed);
-
-acpi_status
-acpi_rs_vendor_resource(u8 * byte_stream_buffer,
- acpi_size * bytes_consumed,
- u8 ** output_buffer, acpi_size * structure_size);
-
-acpi_status
-acpi_rs_vendor_stream(struct acpi_resource *linked_list,
- u8 ** output_buffer, acpi_size * bytes_consumed);
-
-u8 acpi_rs_get_resource_type(u8 resource_start_byte);
+/*
+ * rsdump
+ */
+extern struct acpi_rsdump_info acpi_rs_dump_irq[];
+extern struct acpi_rsdump_info acpi_rs_dump_dma[];
+extern struct acpi_rsdump_info acpi_rs_dump_start_dpf[];
+extern struct acpi_rsdump_info acpi_rs_dump_end_dpf[];
+extern struct acpi_rsdump_info acpi_rs_dump_io[];
+extern struct acpi_rsdump_info acpi_rs_dump_fixed_io[];
+extern struct acpi_rsdump_info acpi_rs_dump_vendor[];
+extern struct acpi_rsdump_info acpi_rs_dump_end_tag[];
+extern struct acpi_rsdump_info acpi_rs_dump_memory24[];
+extern struct acpi_rsdump_info acpi_rs_dump_memory32[];
+extern struct acpi_rsdump_info acpi_rs_dump_fixed_memory32[];
+extern struct acpi_rsdump_info acpi_rs_dump_address16[];
+extern struct acpi_rsdump_info acpi_rs_dump_address32[];
+extern struct acpi_rsdump_info acpi_rs_dump_address64[];
+extern struct acpi_rsdump_info acpi_rs_dump_ext_address64[];
+extern struct acpi_rsdump_info acpi_rs_dump_ext_irq[];
+extern struct acpi_rsdump_info acpi_rs_dump_generic_reg[];
+#endif
#endif /* __ACRESRC_H__ */
diff --git a/include/acpi/acstruct.h b/include/acpi/acstruct.h
index 99d2353..d8c1c2c 100644
--- a/include/acpi/acstruct.h
+++ b/include/acpi/acstruct.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/actables.h b/include/acpi/actables.h
index f92c185..30a4754 100644
--- a/include/acpi/actables.h
+++ b/include/acpi/actables.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index a46f406..ed53f84 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -45,6 +45,12 @@
#define __ACTBL_H__
/*
+ * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
+ * This is the only type that is even remotely portable. Anything else is not
+ * portable, so do not use any other bitfield types.
+ */
+
+/*
* Values for description table header signatures
*/
#define RSDP_NAME "RSDP"
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index 67312c3..cd428d5 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h
index 50305ce..dfc7ac1 100644
--- a/include/acpi/actbl2.h
+++ b/include/acpi/actbl2.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 6213b27..7ca89cd 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -44,7 +44,15 @@
#ifndef __ACTYPES_H__
#define __ACTYPES_H__
-/*! [Begin] no source code translation (keep the typedefs) */
+/*
+ * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header
+ * and must be either 16, 32, or 64
+ */
+#ifndef ACPI_MACHINE_WIDTH
+#error ACPI_MACHINE_WIDTH not defined
+#endif
+
+/*! [Begin] no source code translation */
/*
* Data type ranges
@@ -58,87 +66,150 @@
#define ACPI_UINT64_MAX (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */
#define ACPI_ASCII_MAX 0x7F
-#ifdef DEFINE_ALTERNATE_TYPES
/*
- * Types used only in translated source, defined here to enable
- * cross-platform compilation only.
- */
-typedef int s32;
-typedef unsigned char u8;
-typedef unsigned short u16;
-typedef unsigned int u32;
-typedef COMPILER_DEPENDENT_UINT64 u64;
-
-#endif
-
-/*
- * Data types - Fixed across all compilation models (16/32/64)
+ * Architecture-specific ACPICA Subsystem Data Types
*
- * BOOLEAN Logical Boolean.
- * INT8 8-bit (1 byte) signed value
- * UINT8 8-bit (1 byte) unsigned value
- * INT16 16-bit (2 byte) signed value
- * UINT16 16-bit (2 byte) unsigned value
- * INT32 32-bit (4 byte) signed value
- * UINT32 32-bit (4 byte) unsigned value
- * INT64 64-bit (8 byte) signed value
- * UINT64 64-bit (8 byte) unsigned value
- * ACPI_NATIVE_INT 32-bit on IA-32, 64-bit on IA-64 signed value
- * ACPI_NATIVE_UINT 32-bit on IA-32, 64-bit on IA-64 unsigned value
+ * The goal of these types is to provide source code portability across
+ * 16-bit, 32-bit, and 64-bit targets.
+ *
+ * 1) The following types are of fixed size for all targets (16/32/64):
+ *
+ * BOOLEAN Logical boolean
+ *
+ * UINT8 8-bit (1 byte) unsigned value
+ * UINT16 16-bit (2 byte) unsigned value
+ * UINT32 32-bit (4 byte) unsigned value
+ * UINT64 64-bit (8 byte) unsigned value
+ *
+ * INT16 16-bit (2 byte) signed value
+ * INT32 32-bit (4 byte) signed value
+ * INT64 64-bit (8 byte) signed value
+ *
+ * COMPILER_DEPENDENT_UINT64/INT64 - These types are defined in the
+ * compiler-dependent header(s) and were introduced because there is no common
+ * 64-bit integer type across the various compilation models, as shown in
+ * the table below.
+ *
+ * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit
+ * char 8 8 8 8 8 8
+ * short 16 16 16 16 16 16
+ * _int32 32
+ * int 32 64 32 32 16 16
+ * long 64 64 32 32 32 32
+ * long long 64 64
+ * pointer 64 64 64 32 32 32
+ *
+ * Note: ILP64 and LP32 are currently not supported.
+ *
+ *
+ * 2) These types represent the native word size of the target mode of the
+ * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are
+ * usually used for memory allocation, efficient loop counters, and array
+ * indexes. The types are similar to the size_t type in the C library and are
+ * required because there is no C type that consistently represents the native
+ * data width.
+ *
+ * ACPI_SIZE 16/32/64-bit unsigned value
+ * ACPI_NATIVE_UINT 16/32/64-bit unsigned value
+ * ACPI_NATIVE_INT 16/32/64-bit signed value
+ *
*/
-#ifndef ACPI_MACHINE_WIDTH
-#error ACPI_MACHINE_WIDTH not defined
-#endif
+/*******************************************************************************
+ *
+ * Common types for all compilers, all targets
+ *
+ ******************************************************************************/
-#if ACPI_MACHINE_WIDTH == 64
-
-/*! [Begin] no source code translation (keep the typedefs) */
-
-/*
- * 64-bit type definitions
- */
-typedef unsigned char UINT8;
typedef unsigned char BOOLEAN;
+typedef unsigned char UINT8;
typedef unsigned short UINT16;
-typedef int INT32;
-typedef unsigned int UINT32;
-typedef COMPILER_DEPENDENT_INT64 INT64;
typedef COMPILER_DEPENDENT_UINT64 UINT64;
+typedef COMPILER_DEPENDENT_INT64 INT64;
/*! [End] no source code translation !*/
-typedef s64 acpi_native_int;
+/*******************************************************************************
+ *
+ * Types specific to 64-bit targets
+ *
+ ******************************************************************************/
+
+#if ACPI_MACHINE_WIDTH == 64
+
+/*! [Begin] no source code translation (keep the typedefs as-is) */
+
+typedef unsigned int UINT32;
+typedef int INT32;
+
+/*! [End] no source code translation !*/
+
typedef u64 acpi_native_uint;
+typedef s64 acpi_native_int;
typedef u64 acpi_table_ptr;
typedef u64 acpi_io_address;
typedef u64 acpi_physical_address;
-typedef u64 acpi_size;
-#define ALIGNED_ADDRESS_BOUNDARY 0x00000008 /* No hardware alignment support in IA64 */
-#define ACPI_USE_NATIVE_DIVIDE /* Native 64-bit integer support */
#define ACPI_MAX_PTR ACPI_UINT64_MAX
#define ACPI_SIZE_MAX ACPI_UINT64_MAX
-#elif ACPI_MACHINE_WIDTH == 16
-
-/*! [Begin] no source code translation (keep the typedefs) */
+#define ALIGNED_ADDRESS_BOUNDARY 0x00000008
+#define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */
/*
- * 16-bit type definitions
+ * In the case of the Itanium Processor Family (IPF), the hardware does not
+ * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag
+ * to indicate that special precautions must be taken to avoid alignment faults.
+ * (IA64 or ia64 is currently used by existing compilers to indicate IPF.)
+ *
+ * Note: Em64_t and other X86-64 processors support misaligned transfers,
+ * so there is no need to define this flag.
*/
-typedef unsigned char UINT8;
-typedef unsigned char BOOLEAN;
-typedef unsigned int UINT16;
-typedef long INT32;
-typedef int INT16;
-typedef unsigned long UINT32;
+#if defined (__IA64__) || defined (__ia64__)
+#define ACPI_MISALIGNMENT_NOT_SUPPORTED
+#endif
-struct {
- UINT32 Lo;
- UINT32 Hi;
-};
+/*******************************************************************************
+ *
+ * Types specific to 32-bit targets
+ *
+ ******************************************************************************/
+
+#elif ACPI_MACHINE_WIDTH == 32
+
+/*! [Begin] no source code translation (keep the typedefs as-is) */
+
+typedef unsigned int UINT32;
+typedef int INT32;
+
+/*! [End] no source code translation !*/
+
+typedef u32 acpi_native_uint;
+typedef s32 acpi_native_int;
+
+typedef u64 acpi_table_ptr;
+typedef u32 acpi_io_address;
+typedef u64 acpi_physical_address;
+
+#define ACPI_MAX_PTR ACPI_UINT32_MAX
+#define ACPI_SIZE_MAX ACPI_UINT32_MAX
+
+#define ALIGNED_ADDRESS_BOUNDARY 0x00000004
+
+/*******************************************************************************
+ *
+ * Types specific to 16-bit targets
+ *
+ ******************************************************************************/
+
+#elif ACPI_MACHINE_WIDTH == 16
+
+/*! [Begin] no source code translation (keep the typedefs as-is) */
+
+typedef unsigned long UINT32;
+typedef short INT16;
+typedef long INT32;
/*! [End] no source code translation !*/
@@ -148,61 +219,84 @@
typedef u32 acpi_table_ptr;
typedef u32 acpi_io_address;
typedef char *acpi_physical_address;
-typedef u16 acpi_size;
-#define ALIGNED_ADDRESS_BOUNDARY 0x00000002
-#define ACPI_MISALIGNED_TRANSFERS
-#define ACPI_USE_NATIVE_DIVIDE /* No 64-bit integers, ok to use native divide */
#define ACPI_MAX_PTR ACPI_UINT16_MAX
#define ACPI_SIZE_MAX ACPI_UINT16_MAX
-/*
- * (16-bit only) internal integers must be 32-bits, so
- * 64-bit integers cannot be supported
- */
+#define ALIGNED_ADDRESS_BOUNDARY 0x00000002
+#define ACPI_USE_NATIVE_DIVIDE /* No 64-bit integers, ok to use native divide */
+
+/* 64-bit integers cannot be supported */
+
#define ACPI_NO_INTEGER64_SUPPORT
-#elif ACPI_MACHINE_WIDTH == 32
-
-/*! [Begin] no source code translation (keep the typedefs) */
-
-/*
- * 32-bit type definitions (default)
- */
-typedef unsigned char UINT8;
-typedef unsigned char BOOLEAN;
-typedef unsigned short UINT16;
-typedef int INT32;
-typedef unsigned int UINT32;
-typedef COMPILER_DEPENDENT_INT64 INT64;
-typedef COMPILER_DEPENDENT_UINT64 UINT64;
-
-/*! [End] no source code translation !*/
-
-typedef s32 acpi_native_int;
-typedef u32 acpi_native_uint;
-
-typedef u64 acpi_table_ptr;
-typedef u32 acpi_io_address;
-typedef u64 acpi_physical_address;
-typedef u32 acpi_size;
-
-#define ALIGNED_ADDRESS_BOUNDARY 0x00000004
-#define ACPI_MISALIGNED_TRANSFERS
-#define ACPI_MAX_PTR ACPI_UINT32_MAX
-#define ACPI_SIZE_MAX ACPI_UINT32_MAX
-
#else
+
+/* ACPI_MACHINE_WIDTH must be either 64, 32, or 16 */
+
#error unknown ACPI_MACHINE_WIDTH
#endif
+/* Variable-width type, used instead of clib size_t */
+
+typedef acpi_native_uint acpi_size;
+
+/*******************************************************************************
+ *
+ * OS- or compiler-dependent types
+ *
+ * If the defaults below are not appropriate for the host system, they can
+ * be defined in the compiler-specific or OS-specific header, and this will
+ * take precedence.
+ *
+ ******************************************************************************/
+
+/* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */
+
+#ifndef acpi_uintptr_t
+#define acpi_uintptr_t void *
+#endif
+
/*
- * This type is used for bitfields in ACPI tables. The only type that is
- * even remotely portable is u8. Anything else is not portable, so
- * do not add any more bitfield types.
+ * If acpi_cache_t was not defined in the OS-dependent header,
+ * define it now. This is typically the case where the local cache
+ * manager implementation is to be used (ACPI_USE_LOCAL_CACHE)
*/
-typedef u8 UINT8_BIT;
-typedef acpi_native_uint ACPI_PTRDIFF;
+#ifndef acpi_cache_t
+#define acpi_cache_t struct acpi_memory_list
+#endif
+
+/*
+ * Allow the CPU flags word to be defined per-OS to simplify the use of the
+ * lock and unlock OSL interfaces.
+ */
+#ifndef acpi_cpu_flags
+#define acpi_cpu_flags acpi_native_uint
+#endif
+
+/*
+ * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because
+ * some compilers can catch printf format string problems
+ */
+#ifndef ACPI_PRINTF_LIKE
+#define ACPI_PRINTF_LIKE(c)
+#endif
+
+/*
+ * Some compilers complain about unused variables. Sometimes we don't want to
+ * use all the variables (for example, _acpi_module_name). This allows us
+ * to to tell the compiler in a per-variable manner that a variable
+ * is unused
+ */
+#ifndef ACPI_UNUSED_VAR
+#define ACPI_UNUSED_VAR
+#endif
+
+/*******************************************************************************
+ *
+ * Independent types
+ *
+ ******************************************************************************/
/*
* Pointer overlays to avoid lots of typecasting for
@@ -234,18 +328,8 @@
#define ACPI_LOGMODE_PHYSPTR ACPI_LOGICAL_ADDRESSING | ACPI_PHYSICAL_POINTER
#define ACPI_LOGMODE_LOGPTR ACPI_LOGICAL_ADDRESSING | ACPI_LOGICAL_POINTER
-/*
- * If acpi_cache_t was not defined in the OS-dependent header,
- * define it now. This is typically the case where the local cache
- * manager implementation is to be used (ACPI_USE_LOCAL_CACHE)
- */
-#ifndef acpi_cache_t
-#define acpi_cache_t struct acpi_memory_list
-#endif
+/* Logical defines and NULL */
-/*
- * Useful defines
- */
#ifdef FALSE
#undef FALSE
#endif
@@ -261,12 +345,12 @@
#endif
/*
- * Local datatypes
+ * Mescellaneous types
*/
typedef u32 acpi_status; /* All ACPI Exceptions */
typedef u32 acpi_name; /* 4-byte ACPI name */
typedef char *acpi_string; /* Null terminated ASCII string */
-typedef void *acpi_handle; /* Actually a ptr to an Node */
+typedef void *acpi_handle; /* Actually a ptr to a NS Node */
struct uint64_struct {
u32 lo;
@@ -323,7 +407,7 @@
/*
* Constants with special meanings
*/
-#define ACPI_ROOT_OBJECT (acpi_handle) ACPI_PTR_ADD (char, NULL, ACPI_MAX_PTR)
+#define ACPI_ROOT_OBJECT ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR)
/*
* Initialization sequence
@@ -470,37 +554,6 @@
#define ACPI_TYPE_NOT_FOUND 0xFF
/*
- * Bitmapped ACPI types. Used internally only
- */
-#define ACPI_BTYPE_ANY 0x00000000
-#define ACPI_BTYPE_INTEGER 0x00000001
-#define ACPI_BTYPE_STRING 0x00000002
-#define ACPI_BTYPE_BUFFER 0x00000004
-#define ACPI_BTYPE_PACKAGE 0x00000008
-#define ACPI_BTYPE_FIELD_UNIT 0x00000010
-#define ACPI_BTYPE_DEVICE 0x00000020
-#define ACPI_BTYPE_EVENT 0x00000040
-#define ACPI_BTYPE_METHOD 0x00000080
-#define ACPI_BTYPE_MUTEX 0x00000100
-#define ACPI_BTYPE_REGION 0x00000200
-#define ACPI_BTYPE_POWER 0x00000400
-#define ACPI_BTYPE_PROCESSOR 0x00000800
-#define ACPI_BTYPE_THERMAL 0x00001000
-#define ACPI_BTYPE_BUFFER_FIELD 0x00002000
-#define ACPI_BTYPE_DDB_HANDLE 0x00004000
-#define ACPI_BTYPE_DEBUG_OBJECT 0x00008000
-#define ACPI_BTYPE_REFERENCE 0x00010000
-#define ACPI_BTYPE_RESOURCE 0x00020000
-
-#define ACPI_BTYPE_COMPUTE_DATA (ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING | ACPI_BTYPE_BUFFER)
-
-#define ACPI_BTYPE_DATA (ACPI_BTYPE_COMPUTE_DATA | ACPI_BTYPE_PACKAGE)
-#define ACPI_BTYPE_DATA_REFERENCE (ACPI_BTYPE_DATA | ACPI_BTYPE_REFERENCE | ACPI_BTYPE_DDB_HANDLE)
-#define ACPI_BTYPE_DEVICE_OBJECTS (ACPI_BTYPE_DEVICE | ACPI_BTYPE_THERMAL | ACPI_BTYPE_PROCESSOR)
-#define ACPI_BTYPE_OBJECTS_AND_REFS 0x0001FFFF /* ARG or LOCAL */
-#define ACPI_BTYPE_ALL_OBJECTS 0x0000FFFF
-
-/*
* All I/O
*/
#define ACPI_READ 0
@@ -853,6 +906,14 @@
#define ACPI_VALID_CID 0x0010
#define ACPI_VALID_SXDS 0x0020
+/* Flags for _STA method */
+
+#define ACPI_STA_DEVICE_PRESENT 0x01
+#define ACPI_STA_DEVICE_ENABLED 0x02
+#define ACPI_STA_DEVICE_UI 0x04
+#define ACPI_STA_DEVICE_OK 0x08
+#define ACPI_STA_BATTERY_PRESENT 0x10
+
#define ACPI_COMMON_OBJ_INFO \
acpi_object_type type; /* ACPI object type */ \
acpi_name name /* ACPI object Name */
@@ -895,6 +956,8 @@
/*
* Definitions for Resource Attributes
*/
+typedef u16 acpi_rs_length; /* Resource Length field is fixed at 16 bits */
+typedef u32 acpi_rsdesc_size; /* Max Resource Descriptor size is (length+3) = (64_k-1)+3 */
/*
* Memory Attributes
@@ -916,7 +979,9 @@
#define ACPI_ISA_ONLY_RANGES (u8) 0x02
#define ACPI_ENTIRE_RANGE (ACPI_NON_ISA_ONLY_RANGES | ACPI_ISA_ONLY_RANGES)
-#define ACPI_SPARSE_TRANSLATION (u8) 0x03
+/* Type of translation - 1=Sparse, 0=Dense */
+
+#define ACPI_SPARSE_TRANSLATION (u8) 0x01
/*
* IO Port Descriptor Decode
@@ -927,8 +992,8 @@
/*
* IRQ Attributes
*/
-#define ACPI_EDGE_SENSITIVE (u8) 0x00
-#define ACPI_LEVEL_SENSITIVE (u8) 0x01
+#define ACPI_LEVEL_SENSITIVE (u8) 0x00
+#define ACPI_EDGE_SENSITIVE (u8) 0x01
#define ACPI_ACTIVE_HIGH (u8) 0x00
#define ACPI_ACTIVE_LOW (u8) 0x01
@@ -975,27 +1040,45 @@
#define ACPI_CONSUMER (u8) 0x01
/*
+ * If possible, pack the following structures to byte alignment
+ */
+#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
+#pragma pack(1)
+#endif
+
+/* UUID data structures for use in vendor-defined resource descriptors */
+
+struct acpi_uuid {
+ u8 data[ACPI_UUID_LENGTH];
+};
+
+struct acpi_vendor_uuid {
+ u8 subtype;
+ u8 data[ACPI_UUID_LENGTH];
+};
+
+/*
* Structures used to describe device resources
*/
struct acpi_resource_irq {
- u32 edge_level;
- u32 active_high_low;
- u32 shared_exclusive;
- u32 number_of_interrupts;
- u32 interrupts[1];
+ u8 triggering;
+ u8 polarity;
+ u8 sharable;
+ u8 interrupt_count;
+ u8 interrupts[1];
};
struct acpi_resource_dma {
- u32 type;
- u32 bus_master;
- u32 transfer;
- u32 number_of_channels;
- u32 channels[1];
+ u8 type;
+ u8 bus_master;
+ u8 transfer;
+ u8 channel_count;
+ u8 channels[1];
};
-struct acpi_resource_start_dpf {
- u32 compatibility_priority;
- u32 performance_robustness;
+struct acpi_resource_start_dependent {
+ u8 compatibility_priority;
+ u8 performance_robustness;
};
/*
@@ -1004,179 +1087,217 @@
*/
struct acpi_resource_io {
- u32 io_decode;
- u32 min_base_address;
- u32 max_base_address;
- u32 alignment;
- u32 range_length;
+ u8 io_decode;
+ u8 alignment;
+ u8 address_length;
+ u16 minimum;
+ u16 maximum;
};
struct acpi_resource_fixed_io {
- u32 base_address;
- u32 range_length;
+ u16 address;
+ u8 address_length;
};
struct acpi_resource_vendor {
- u32 length;
- u8 reserved[1];
+ u16 byte_length;
+ u8 byte_data[1];
+};
+
+/* Vendor resource with UUID info (introduced in ACPI 3.0) */
+
+struct acpi_resource_vendor_typed {
+ u16 byte_length;
+ u8 uuid_subtype;
+ u8 uuid[ACPI_UUID_LENGTH];
+ u8 byte_data[1];
};
struct acpi_resource_end_tag {
u8 checksum;
};
-struct acpi_resource_mem24 {
- u32 read_write_attribute;
- u32 min_base_address;
- u32 max_base_address;
- u32 alignment;
- u32 range_length;
+struct acpi_resource_memory24 {
+ u8 write_protect;
+ u16 minimum;
+ u16 maximum;
+ u16 alignment;
+ u16 address_length;
};
-struct acpi_resource_mem32 {
- u32 read_write_attribute;
- u32 min_base_address;
- u32 max_base_address;
+struct acpi_resource_memory32 {
+ u8 write_protect;
+ u32 minimum;
+ u32 maximum;
u32 alignment;
- u32 range_length;
+ u32 address_length;
};
-struct acpi_resource_fixed_mem32 {
- u32 read_write_attribute;
- u32 range_base_address;
- u32 range_length;
+struct acpi_resource_fixed_memory32 {
+ u8 write_protect;
+ u32 address;
+ u32 address_length;
};
struct acpi_memory_attribute {
- u16 cache_attribute;
- u16 read_write_attribute;
+ u8 write_protect;
+ u8 caching;
+ u8 range_type;
+ u8 translation;
};
struct acpi_io_attribute {
- u16 range_attribute;
- u16 translation_attribute;
-};
-
-struct acpi_bus_attribute {
- u16 reserved1;
- u16 reserved2;
+ u8 range_type;
+ u8 translation;
+ u8 translation_type;
+ u8 reserved1;
};
union acpi_resource_attribute {
- struct acpi_memory_attribute memory;
+ struct acpi_memory_attribute mem;
struct acpi_io_attribute io;
- struct acpi_bus_attribute bus;
+
+ /* Used for the *word_space macros */
+
+ u8 type_specific;
};
struct acpi_resource_source {
- u32 index;
- u32 string_length;
+ u8 index;
+ u16 string_length;
char *string_ptr;
};
/* Fields common to all address descriptors, 16/32/64 bit */
#define ACPI_RESOURCE_ADDRESS_COMMON \
- u32 resource_type; \
- u32 producer_consumer; \
- u32 decode; \
- u32 min_address_fixed; \
- u32 max_address_fixed; \
- union acpi_resource_attribute attribute;
+ u8 resource_type; \
+ u8 producer_consumer; \
+ u8 decode; \
+ u8 min_address_fixed; \
+ u8 max_address_fixed; \
+ union acpi_resource_attribute info;
struct acpi_resource_address {
ACPI_RESOURCE_ADDRESS_COMMON};
struct acpi_resource_address16 {
- ACPI_RESOURCE_ADDRESS_COMMON u32 granularity;
- u32 min_address_range;
- u32 max_address_range;
- u32 address_translation_offset;
- u32 address_length;
+ ACPI_RESOURCE_ADDRESS_COMMON u16 granularity;
+ u16 minimum;
+ u16 maximum;
+ u16 translation_offset;
+ u16 address_length;
struct acpi_resource_source resource_source;
};
struct acpi_resource_address32 {
ACPI_RESOURCE_ADDRESS_COMMON u32 granularity;
- u32 min_address_range;
- u32 max_address_range;
- u32 address_translation_offset;
+ u32 minimum;
+ u32 maximum;
+ u32 translation_offset;
u32 address_length;
struct acpi_resource_source resource_source;
};
struct acpi_resource_address64 {
ACPI_RESOURCE_ADDRESS_COMMON u64 granularity;
- u64 min_address_range;
- u64 max_address_range;
- u64 address_translation_offset;
+ u64 minimum;
+ u64 maximum;
+ u64 translation_offset;
u64 address_length;
- u64 type_specific_attributes;
struct acpi_resource_source resource_source;
};
-struct acpi_resource_ext_irq {
- u32 producer_consumer;
- u32 edge_level;
- u32 active_high_low;
- u32 shared_exclusive;
- u32 number_of_interrupts;
+struct acpi_resource_extended_address64 {
+ ACPI_RESOURCE_ADDRESS_COMMON u8 revision_iD;
+ u64 granularity;
+ u64 minimum;
+ u64 maximum;
+ u64 translation_offset;
+ u64 address_length;
+ u64 type_specific;
+};
+
+struct acpi_resource_extended_irq {
+ u8 producer_consumer;
+ u8 triggering;
+ u8 polarity;
+ u8 sharable;
+ u8 interrupt_count;
struct acpi_resource_source resource_source;
u32 interrupts[1];
};
+struct acpi_resource_generic_register {
+ u8 space_id;
+ u8 bit_width;
+ u8 bit_offset;
+ u8 access_size;
+ u64 address;
+};
+
/* ACPI_RESOURCE_TYPEs */
-#define ACPI_RSTYPE_IRQ 0
-#define ACPI_RSTYPE_DMA 1
-#define ACPI_RSTYPE_START_DPF 2
-#define ACPI_RSTYPE_END_DPF 3
-#define ACPI_RSTYPE_IO 4
-#define ACPI_RSTYPE_FIXED_IO 5
-#define ACPI_RSTYPE_VENDOR 6
-#define ACPI_RSTYPE_END_TAG 7
-#define ACPI_RSTYPE_MEM24 8
-#define ACPI_RSTYPE_MEM32 9
-#define ACPI_RSTYPE_FIXED_MEM32 10
-#define ACPI_RSTYPE_ADDRESS16 11
-#define ACPI_RSTYPE_ADDRESS32 12
-#define ACPI_RSTYPE_ADDRESS64 13
-#define ACPI_RSTYPE_EXT_IRQ 14
-
-typedef u32 acpi_resource_type;
+#define ACPI_RESOURCE_TYPE_IRQ 0
+#define ACPI_RESOURCE_TYPE_DMA 1
+#define ACPI_RESOURCE_TYPE_START_DEPENDENT 2
+#define ACPI_RESOURCE_TYPE_END_DEPENDENT 3
+#define ACPI_RESOURCE_TYPE_IO 4
+#define ACPI_RESOURCE_TYPE_FIXED_IO 5
+#define ACPI_RESOURCE_TYPE_VENDOR 6
+#define ACPI_RESOURCE_TYPE_END_TAG 7
+#define ACPI_RESOURCE_TYPE_MEMORY24 8
+#define ACPI_RESOURCE_TYPE_MEMORY32 9
+#define ACPI_RESOURCE_TYPE_FIXED_MEMORY32 10
+#define ACPI_RESOURCE_TYPE_ADDRESS16 11
+#define ACPI_RESOURCE_TYPE_ADDRESS32 12
+#define ACPI_RESOURCE_TYPE_ADDRESS64 13
+#define ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64 14 /* ACPI 3.0 */
+#define ACPI_RESOURCE_TYPE_EXTENDED_IRQ 15
+#define ACPI_RESOURCE_TYPE_GENERIC_REGISTER 16
+#define ACPI_RESOURCE_TYPE_MAX 16
union acpi_resource_data {
struct acpi_resource_irq irq;
struct acpi_resource_dma dma;
- struct acpi_resource_start_dpf start_dpf;
+ struct acpi_resource_start_dependent start_dpf;
struct acpi_resource_io io;
struct acpi_resource_fixed_io fixed_io;
- struct acpi_resource_vendor vendor_specific;
+ struct acpi_resource_vendor vendor;
+ struct acpi_resource_vendor_typed vendor_typed;
struct acpi_resource_end_tag end_tag;
- struct acpi_resource_mem24 memory24;
- struct acpi_resource_mem32 memory32;
- struct acpi_resource_fixed_mem32 fixed_memory32;
- struct acpi_resource_address address; /* Common 16/32/64 address fields */
+ struct acpi_resource_memory24 memory24;
+ struct acpi_resource_memory32 memory32;
+ struct acpi_resource_fixed_memory32 fixed_memory32;
struct acpi_resource_address16 address16;
struct acpi_resource_address32 address32;
struct acpi_resource_address64 address64;
- struct acpi_resource_ext_irq extended_irq;
+ struct acpi_resource_extended_address64 ext_address64;
+ struct acpi_resource_extended_irq extended_irq;
+ struct acpi_resource_generic_register generic_reg;
+
+ /* Common fields */
+
+ struct acpi_resource_address address; /* Common 16/32/64 address fields */
};
struct acpi_resource {
- acpi_resource_type id;
+ u32 type;
u32 length;
union acpi_resource_data data;
};
-#define ACPI_RESOURCE_LENGTH 12
-#define ACPI_RESOURCE_LENGTH_NO_DATA 8 /* Id + Length fields */
+/* restore default alignment */
-#define ACPI_SIZEOF_RESOURCE(type) (ACPI_RESOURCE_LENGTH_NO_DATA + sizeof (type))
+#pragma pack()
+
+#define ACPI_RS_SIZE_MIN 12
+#define ACPI_RS_SIZE_NO_DATA 8 /* Id + Length fields */
+#define ACPI_RS_SIZE(type) (u32) (ACPI_RS_SIZE_NO_DATA + sizeof (type))
#define ACPI_NEXT_RESOURCE(res) (struct acpi_resource *)((u8 *) res + res->length)
-#ifdef ACPI_MISALIGNED_TRANSFERS
+#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
#define ACPI_ALIGN_RESOURCE_SIZE(length) (length)
#else
#define ACPI_ALIGN_RESOURCE_SIZE(length) ACPI_ROUND_UP_TO_NATIVE_WORD(length)
diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h
index c108645..0927765 100644
--- a/include/acpi/acutils.h
+++ b/include/acpi/acutils.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -44,6 +44,39 @@
#ifndef _ACUTILS_H
#define _ACUTILS_H
+extern const u8 acpi_gbl_resource_aml_sizes[];
+
+/* Strings used by the disassembler and debugger resource dump routines */
+
+#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
+
+extern const char *acpi_gbl_BMdecode[2];
+extern const char *acpi_gbl_config_decode[4];
+extern const char *acpi_gbl_consume_decode[2];
+extern const char *acpi_gbl_DECdecode[2];
+extern const char *acpi_gbl_HEdecode[2];
+extern const char *acpi_gbl_io_decode[2];
+extern const char *acpi_gbl_LLdecode[2];
+extern const char *acpi_gbl_max_decode[2];
+extern const char *acpi_gbl_MEMdecode[4];
+extern const char *acpi_gbl_min_decode[2];
+extern const char *acpi_gbl_MTPdecode[4];
+extern const char *acpi_gbl_RNGdecode[4];
+extern const char *acpi_gbl_RWdecode[2];
+extern const char *acpi_gbl_SHRdecode[2];
+extern const char *acpi_gbl_SIZdecode[4];
+extern const char *acpi_gbl_TRSdecode[2];
+extern const char *acpi_gbl_TTPdecode[2];
+extern const char *acpi_gbl_TYPdecode[4];
+#endif
+
+/* Types for Resource descriptor entries */
+
+#define ACPI_INVALID_RESOURCE 0
+#define ACPI_FIXED_LENGTH 1
+#define ACPI_VARIABLE_LENGTH 2
+#define ACPI_SMALL_VARIABLE_LENGTH 3
+
typedef
acpi_status(*acpi_pkg_callback) (u8 object_type,
union acpi_operand_object * source_object,
@@ -159,7 +192,6 @@
#define ACPI_IS_LOWER(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO))
#define ACPI_IS_PRINT(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO | _ACPI_UP | _ACPI_DI | _ACPI_SP | _ACPI_PU))
#define ACPI_IS_ALPHA(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO | _ACPI_UP))
-#define ACPI_IS_ASCII(c) ((c) < 0x80)
#endif /* ACPI_USE_SYSTEM_CLIBRARY */
@@ -243,21 +275,22 @@
const char *function_name,
char *module_name, u32 component_id, u8 * ptr);
-void acpi_ut_report_info(char *module_name, u32 line_number, u32 component_id);
-
-void acpi_ut_report_error(char *module_name, u32 line_number, u32 component_id);
-
-void
-acpi_ut_report_warning(char *module_name, u32 line_number, u32 component_id);
-
void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id);
+void acpi_ut_report_error(char *module_name, u32 line_number);
+
+void acpi_ut_report_info(char *module_name, u32 line_number);
+
+void acpi_ut_report_warning(char *module_name, u32 line_number);
+
+/* Error and message reporting interfaces */
+
void ACPI_INTERNAL_VAR_XFACE
acpi_ut_debug_print(u32 requested_debug_level,
u32 line_number,
const char *function_name,
char *module_name,
- u32 component_id, char *format, ...) ACPI_PRINTF_LIKE_FUNC;
+ u32 component_id, char *format, ...) ACPI_PRINTF_LIKE(6);
void ACPI_INTERNAL_VAR_XFACE
acpi_ut_debug_print_raw(u32 requested_debug_level,
@@ -265,7 +298,24 @@
const char *function_name,
char *module_name,
u32 component_id,
- char *format, ...) ACPI_PRINTF_LIKE_FUNC;
+ char *format, ...) ACPI_PRINTF_LIKE(6);
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_error(char *module_name,
+ u32 line_number, char *format, ...) ACPI_PRINTF_LIKE(3);
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_exception(char *module_name,
+ u32 line_number,
+ acpi_status status, char *format, ...) ACPI_PRINTF_LIKE(4);
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_warning(char *module_name,
+ u32 line_number, char *format, ...) ACPI_PRINTF_LIKE(3);
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_info(char *module_name,
+ u32 line_number, char *format, ...) ACPI_PRINTF_LIKE(3);
/*
* utdelete - Object deletion and reference counts
@@ -419,7 +469,19 @@
#define ACPI_ANY_BASE 0
-u8 *acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc);
+acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index);
+
+u32 acpi_ut_get_descriptor_length(void *aml);
+
+u16 acpi_ut_get_resource_length(void *aml);
+
+u8 acpi_ut_get_resource_header_length(void *aml);
+
+u8 acpi_ut_get_resource_type(void *aml);
+
+acpi_status
+acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc,
+ u8 ** end_tag);
u8 acpi_ut_generate_checksum(u8 * buffer, u32 length);
diff --git a/include/acpi/amlcode.h b/include/acpi/amlcode.h
index 7fdf5299..37964a5 100644
--- a/include/acpi/amlcode.h
+++ b/include/acpi/amlcode.h
@@ -7,7 +7,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/amlresrc.h b/include/acpi/amlresrc.h
index 051786e..fb47353 100644
--- a/include/acpi/amlresrc.h
+++ b/include/acpi/amlresrc.h
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -92,182 +92,168 @@
struct asl_resource_node *next;
};
+/* Macros used to generate AML resource length fields */
+
+#define ACPI_AML_SIZE_LARGE(r) (sizeof (r) - sizeof (struct aml_resource_large_header))
+#define ACPI_AML_SIZE_SMALL(r) (sizeof (r) - sizeof (struct aml_resource_small_header))
+
/*
* Resource descriptors defined in the ACPI specification.
*
* Packing/alignment must be BYTE because these descriptors
- * are used to overlay the AML byte stream.
+ * are used to overlay the raw AML byte stream.
*/
#pragma pack(1)
-struct asl_irq_format_desc {
- u8 descriptor_type;
- u16 irq_mask;
+/*
+ * SMALL descriptors
+ */
+#define AML_RESOURCE_SMALL_HEADER_COMMON \
+ u8 descriptor_type;
+
+struct aml_resource_small_header {
+AML_RESOURCE_SMALL_HEADER_COMMON};
+
+struct aml_resource_irq {
+ AML_RESOURCE_SMALL_HEADER_COMMON u16 irq_mask;
u8 flags;
};
-struct asl_irq_noflags_desc {
- u8 descriptor_type;
- u16 irq_mask;
+struct aml_resource_irq_noflags {
+ AML_RESOURCE_SMALL_HEADER_COMMON u16 irq_mask;
};
-struct asl_dma_format_desc {
- u8 descriptor_type;
- u8 dma_channel_mask;
+struct aml_resource_dma {
+ AML_RESOURCE_SMALL_HEADER_COMMON u8 dma_channel_mask;
u8 flags;
};
-struct asl_start_dependent_desc {
- u8 descriptor_type;
- u8 flags;
+struct aml_resource_start_dependent {
+ AML_RESOURCE_SMALL_HEADER_COMMON u8 flags;
};
-struct asl_start_dependent_noprio_desc {
- u8 descriptor_type;
-};
+struct aml_resource_start_dependent_noprio {
+AML_RESOURCE_SMALL_HEADER_COMMON};
-struct asl_end_dependent_desc {
- u8 descriptor_type;
-};
+struct aml_resource_end_dependent {
+AML_RESOURCE_SMALL_HEADER_COMMON};
-struct asl_io_port_desc {
- u8 descriptor_type;
- u8 information;
- u16 address_min;
- u16 address_max;
+struct aml_resource_io {
+ AML_RESOURCE_SMALL_HEADER_COMMON u8 flags;
+ u16 minimum;
+ u16 maximum;
u8 alignment;
- u8 length;
+ u8 address_length;
};
-struct asl_fixed_io_port_desc {
- u8 descriptor_type;
- u16 base_address;
- u8 length;
+struct aml_resource_fixed_io {
+ AML_RESOURCE_SMALL_HEADER_COMMON u16 address;
+ u8 address_length;
};
-struct asl_small_vendor_desc {
- u8 descriptor_type;
- u8 vendor_defined[7];
+struct aml_resource_vendor_small {
+AML_RESOURCE_SMALL_HEADER_COMMON};
+
+struct aml_resource_end_tag {
+ AML_RESOURCE_SMALL_HEADER_COMMON u8 checksum;
};
-struct asl_end_tag_desc {
- u8 descriptor_type;
- u8 checksum;
-};
+/*
+ * LARGE descriptors
+ */
+#define AML_RESOURCE_LARGE_HEADER_COMMON \
+ u8 descriptor_type;\
+ u16 resource_length;
-/* LARGE descriptors */
+struct aml_resource_large_header {
+AML_RESOURCE_LARGE_HEADER_COMMON};
-struct asl_memory_24_desc {
- u8 descriptor_type;
- u16 length;
- u8 information;
- u16 address_min;
- u16 address_max;
+struct aml_resource_memory24 {
+ AML_RESOURCE_LARGE_HEADER_COMMON u8 flags;
+ u16 minimum;
+ u16 maximum;
u16 alignment;
- u16 range_length;
+ u16 address_length;
};
-struct asl_large_vendor_desc {
- u8 descriptor_type;
- u16 length;
- u8 vendor_defined[1];
-};
+struct aml_resource_vendor_large {
+AML_RESOURCE_LARGE_HEADER_COMMON};
-struct asl_memory_32_desc {
- u8 descriptor_type;
- u16 length;
- u8 information;
- u32 address_min;
- u32 address_max;
+struct aml_resource_memory32 {
+ AML_RESOURCE_LARGE_HEADER_COMMON u8 flags;
+ u32 minimum;
+ u32 maximum;
u32 alignment;
- u32 range_length;
+ u32 address_length;
};
-struct asl_fixed_memory_32_desc {
- u8 descriptor_type;
- u16 length;
- u8 information;
- u32 base_address;
- u32 range_length;
+struct aml_resource_fixed_memory32 {
+ AML_RESOURCE_LARGE_HEADER_COMMON u8 flags;
+ u32 address;
+ u32 address_length;
};
-struct asl_extended_address_desc {
- u8 descriptor_type;
- u16 length;
- u8 resource_type;
- u8 flags;
- u8 specific_flags;
- u8 revision_iD;
+#define AML_RESOURCE_ADDRESS_COMMON \
+ u8 resource_type; \
+ u8 flags; \
+ u8 specific_flags;
+
+struct aml_resource_address {
+AML_RESOURCE_LARGE_HEADER_COMMON AML_RESOURCE_ADDRESS_COMMON};
+
+struct aml_resource_extended_address64 {
+ AML_RESOURCE_LARGE_HEADER_COMMON
+ AML_RESOURCE_ADDRESS_COMMON u8 revision_iD;
u8 reserved;
u64 granularity;
- u64 address_min;
- u64 address_max;
+ u64 minimum;
+ u64 maximum;
u64 translation_offset;
u64 address_length;
- u64 type_specific_attributes;
- u8 optional_fields[2]; /* Used for length calculation only */
+ u64 type_specific;
};
-#define ASL_EXTENDED_ADDRESS_DESC_REVISION 1 /* ACPI 3.0 */
+#define AML_RESOURCE_EXTENDED_ADDRESS_REVISION 1 /* ACPI 3.0 */
-struct asl_qword_address_desc {
- u8 descriptor_type;
- u16 length;
- u8 resource_type;
- u8 flags;
- u8 specific_flags;
- u64 granularity;
- u64 address_min;
- u64 address_max;
+struct aml_resource_address64 {
+ AML_RESOURCE_LARGE_HEADER_COMMON
+ AML_RESOURCE_ADDRESS_COMMON u64 granularity;
+ u64 minimum;
+ u64 maximum;
u64 translation_offset;
u64 address_length;
- u8 optional_fields[2];
};
-struct asl_dword_address_desc {
- u8 descriptor_type;
- u16 length;
- u8 resource_type;
- u8 flags;
- u8 specific_flags;
- u32 granularity;
- u32 address_min;
- u32 address_max;
+struct aml_resource_address32 {
+ AML_RESOURCE_LARGE_HEADER_COMMON
+ AML_RESOURCE_ADDRESS_COMMON u32 granularity;
+ u32 minimum;
+ u32 maximum;
u32 translation_offset;
u32 address_length;
- u8 optional_fields[2];
};
-struct asl_word_address_desc {
- u8 descriptor_type;
- u16 length;
- u8 resource_type;
- u8 flags;
- u8 specific_flags;
- u16 granularity;
- u16 address_min;
- u16 address_max;
+struct aml_resource_address16 {
+ AML_RESOURCE_LARGE_HEADER_COMMON
+ AML_RESOURCE_ADDRESS_COMMON u16 granularity;
+ u16 minimum;
+ u16 maximum;
u16 translation_offset;
u16 address_length;
- u8 optional_fields[2];
};
-struct asl_extended_xrupt_desc {
- u8 descriptor_type;
- u16 length;
- u8 flags;
- u8 table_length;
- u32 interrupt_number[1];
+struct aml_resource_extended_irq {
+ AML_RESOURCE_LARGE_HEADER_COMMON u8 flags;
+ u8 interrupt_count;
+ u32 interrupts[1];
/* res_source_index, res_source optional fields follow */
};
-struct asl_general_register_desc {
- u8 descriptor_type;
- u16 length;
- u8 address_space_id;
+struct aml_resource_generic_register {
+ AML_RESOURCE_LARGE_HEADER_COMMON u8 address_space_id;
u8 bit_width;
u8 bit_offset;
- u8 access_size; /* ACPI 3.0, was Reserved */
+ u8 access_size; /* ACPI 3.0, was previously Reserved */
u64 address;
};
@@ -277,26 +263,39 @@
/* Union of all resource descriptors, so we can allocate the worst case */
-union asl_resource_desc {
- struct asl_irq_format_desc irq;
- struct asl_dma_format_desc dma;
- struct asl_start_dependent_desc std;
- struct asl_end_dependent_desc end;
- struct asl_io_port_desc iop;
- struct asl_fixed_io_port_desc fio;
- struct asl_small_vendor_desc smv;
- struct asl_end_tag_desc et;
+union aml_resource {
+ /* Descriptor headers */
- struct asl_memory_24_desc M24;
- struct asl_large_vendor_desc lgv;
- struct asl_memory_32_desc M32;
- struct asl_fixed_memory_32_desc F32;
- struct asl_qword_address_desc qas;
- struct asl_dword_address_desc das;
- struct asl_word_address_desc was;
- struct asl_extended_address_desc eas;
- struct asl_extended_xrupt_desc exx;
- struct asl_general_register_desc grg;
+ struct aml_resource_small_header small_header;
+ struct aml_resource_large_header large_header;
+
+ /* Small resource descriptors */
+
+ struct aml_resource_irq irq;
+ struct aml_resource_dma dma;
+ struct aml_resource_start_dependent start_dpf;
+ struct aml_resource_end_dependent end_dpf;
+ struct aml_resource_io io;
+ struct aml_resource_fixed_io fixed_io;
+ struct aml_resource_vendor_small vendor_small;
+ struct aml_resource_end_tag end_tag;
+
+ /* Large resource descriptors */
+
+ struct aml_resource_memory24 memory24;
+ struct aml_resource_generic_register generic_reg;
+ struct aml_resource_vendor_large vendor_large;
+ struct aml_resource_memory32 memory32;
+ struct aml_resource_fixed_memory32 fixed_memory32;
+ struct aml_resource_address16 address16;
+ struct aml_resource_address32 address32;
+ struct aml_resource_address64 address64;
+ struct aml_resource_extended_address64 ext_address64;
+ struct aml_resource_extended_irq extended_irq;
+
+ /* Utility overlays */
+
+ struct aml_resource_address address;
u32 u32_item;
u16 u16_item;
u8 U8item;
diff --git a/include/acpi/pdc_intel.h b/include/acpi/pdc_intel.h
index 91f4a12..3fa81d5 100644
--- a/include/acpi/pdc_intel.h
+++ b/include/acpi/pdc_intel.h
@@ -15,9 +15,7 @@
#define ACPI_PDC_C_C1_FFH (0x0100)
#define ACPI_PDC_EST_CAPABILITY_SMP (ACPI_PDC_SMP_C1PT | \
- ACPI_PDC_C_C1_HALT)
-
-#define ACPI_PDC_EST_CAPABILITY_SMP_MSR (ACPI_PDC_EST_CAPABILITY_SMP | \
+ ACPI_PDC_C_C1_HALT | \
ACPI_PDC_P_FFH)
#define ACPI_PDC_C_CAPABILITY_SMP (ACPI_PDC_SMP_C2C3 | \
diff --git a/include/acpi/platform/acenv.h b/include/acpi/platform/acenv.h
index 16609c1..223ec64 100644
--- a/include/acpi/platform/acenv.h
+++ b/include/acpi/platform/acenv.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -68,6 +68,7 @@
#define ACPI_APPLICATION
#define ACPI_DEBUGGER
#define ACPI_DISASSEMBLER
+#define ACPI_MUTEX_DEBUG
#endif
#ifdef ACPI_ASL_COMPILER
@@ -148,6 +149,9 @@
#elif defined(NETWARE)
#include "acnetware.h"
+#elif defined(__sun)
+#include "acsolaris.h"
+
#else
/* All other environments */
@@ -157,13 +161,6 @@
#define COMPILER_DEPENDENT_INT64 long long
#define COMPILER_DEPENDENT_UINT64 unsigned long long
-/*
- * This macro is used to tag functions as "printf-like" because
- * some compilers can catch printf format string problems. MSVC
- * doesn't, so this is proprocessed away.
- */
-#define ACPI_PRINTF_LIKE_FUNC
-
#endif
/*
@@ -205,6 +202,8 @@
*
*****************************************************************************/
+#define ACPI_IS_ASCII(c) ((c) < 0x80)
+
#ifdef ACPI_USE_SYSTEM_CLIBRARY
/*
* Use the standard C library headers.
@@ -234,7 +233,7 @@
#define ACPI_STRCAT(d,s) (void) strcat((d), (s))
#define ACPI_STRNCAT(d,s,n) strncat((d), (s), (acpi_size)(n))
#define ACPI_STRTOUL(d,s,n) strtoul((d), (s), (acpi_size)(n))
-#define ACPI_MEMCMP(s1,s2,n) memcmp((s1), (s2), (acpi_size)(n))
+#define ACPI_MEMCMP(s1,s2,n) memcmp((const char *)(s1), (const char *)(s2), (acpi_size)(n))
#define ACPI_MEMCPY(d,s,n) (void) memcpy((d), (s), (acpi_size)(n))
#define ACPI_MEMSET(d,s,n) (void) memset((d), (s), (acpi_size)(n))
@@ -246,7 +245,6 @@
#define ACPI_IS_UPPER(i) isupper((int) (i))
#define ACPI_IS_PRINT(i) isprint((int) (i))
#define ACPI_IS_ALPHA(i) isalpha((int) (i))
-#define ACPI_IS_ASCII(i) isascii((int) (i))
#else
@@ -273,8 +271,8 @@
/*
* Storage alignment properties
*/
-#define _AUPBND (sizeof (acpi_native_int) - 1)
-#define _ADNBND (sizeof (acpi_native_int) - 1)
+#define _AUPBND (sizeof (acpi_native_uint) - 1)
+#define _ADNBND (sizeof (acpi_native_uint) - 1)
/*
* Variable argument list macro definitions
@@ -296,7 +294,7 @@
#define ACPI_STRCAT(d,s) (void) acpi_ut_strcat ((d), (s))
#define ACPI_STRNCAT(d,s,n) acpi_ut_strncat ((d), (s), (acpi_size)(n))
#define ACPI_STRTOUL(d,s,n) acpi_ut_strtoul ((d), (s), (acpi_size)(n))
-#define ACPI_MEMCMP(s1,s2,n) acpi_ut_memcmp((s1), (s2), (acpi_size)(n))
+#define ACPI_MEMCMP(s1,s2,n) acpi_ut_memcmp((const char *)(s1), (const char *)(s2), (acpi_size)(n))
#define ACPI_MEMCPY(d,s,n) (void) acpi_ut_memcpy ((d), (s), (acpi_size)(n))
#define ACPI_MEMSET(d,v,n) (void) acpi_ut_memset ((d), (v), (acpi_size)(n))
#define ACPI_TOUPPER acpi_ut_to_upper
diff --git a/include/acpi/platform/acgcc.h b/include/acpi/platform/acgcc.h
index 4c0e0ba..da80933 100644
--- a/include/acpi/platform/acgcc.h
+++ b/include/acpi/platform/acgcc.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -48,12 +48,14 @@
#define ACPI_GET_FUNCTION_NAME __FUNCTION__
-/* This macro is used to tag functions as "printf-like" because
+/*
+ * This macro is used to tag functions as "printf-like" because
* some compilers (like GCC) can catch printf format string problems.
*/
-#define ACPI_PRINTF_LIKE_FUNC __attribute__ ((__format__ (__printf__, 6, 7)))
+#define ACPI_PRINTF_LIKE(c) __attribute__ ((__format__ (__printf__, c, c+1)))
-/* Some compilers complain about unused variables. Sometimes we don't want to
+/*
+ * Some compilers complain about unused variables. Sometimes we don't want to
* use all the variables (for example, _acpi_module_name). This allows us
* to to tell the compiler warning in a per-variable manner that a variable
* is unused.
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index c93e656..2e6d545 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -71,6 +71,10 @@
#define acpi_cache_t kmem_cache_t
#endif
+/* Full namespace pathname length limit - arbitrary */
+
+#define ACPI_PATHNAME_MAX 256
+
#else /* !__KERNEL__ */
#include <stdarg.h>
@@ -98,4 +102,6 @@
#include "acgcc.h"
+#define acpi_cpu_flags unsigned long
+
#endif /* __ACLINUX_H__ */
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 7a00d50..badf027 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -62,9 +62,6 @@
u32 bm_activity;
int count;
struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER];
-
- /* the _PDC objects passed by the driver, if any */
- struct acpi_object_list *pdc;
};
/* Performance Management */
@@ -96,8 +93,6 @@
unsigned int state_count;
struct acpi_processor_px *states;
- /* the _PDC objects passed by the driver, if any */
- struct acpi_object_list *pdc;
};
/* Throttling Control */
@@ -151,6 +146,9 @@
struct acpi_processor_performance *performance;
struct acpi_processor_throttling throttling;
struct acpi_processor_limit limit;
+
+ /* the _PDC objects for this processor, if any */
+ struct acpi_object_list *pdc;
};
struct acpi_processor_errata {
@@ -178,22 +176,12 @@
extern struct acpi_processor *processors[NR_CPUS];
extern struct acpi_processor_errata errata;
-int acpi_processor_set_pdc(struct acpi_processor *pr,
- struct acpi_object_list *pdc_in);
+void arch_acpi_processor_init_pdc(struct acpi_processor *pr);
-#ifdef ARCH_HAS_POWER_PDC_INIT
-void acpi_processor_power_init_pdc(struct acpi_processor_power *pow,
- unsigned int cpu);
+#ifdef ARCH_HAS_POWER_INIT
void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
unsigned int cpu);
#else
-static inline void acpi_processor_power_init_pdc(struct acpi_processor_power
- *pow, unsigned int cpu)
-{
- pow->pdc = NULL;
- return;
-}
-
static inline void acpi_processor_power_init_bm_check(struct
acpi_processor_flags
*flags, unsigned int cpu)
@@ -235,9 +223,6 @@
/* in processor_throttling.c */
int acpi_processor_get_throttling_info(struct acpi_processor *pr);
int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
-ssize_t acpi_processor_write_throttling(struct file *file,
- const char __user * buffer,
- size_t count, loff_t * data);
extern struct file_operations acpi_processor_throttling_fops;
/* in processor_idle.c */
@@ -249,9 +234,6 @@
/* in processor_thermal.c */
int acpi_processor_get_limit_info(struct acpi_processor *pr);
-ssize_t acpi_processor_write_limit(struct file *file,
- const char __user * buffer,
- size_t count, loff_t * data);
extern struct file_operations acpi_processor_limit_fops;
#ifdef CONFIG_CPU_FREQ
diff --git a/include/asm-alpha/dma-mapping.h b/include/asm-alpha/dma-mapping.h
index 9dc7256..62d0d66 100644
--- a/include/asm-alpha/dma-mapping.h
+++ b/include/asm-alpha/dma-mapping.h
@@ -30,6 +30,7 @@
#else /* no PCI - no IOMMU. */
+struct scatterlist;
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp);
int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
diff --git a/include/asm-alpha/system.h b/include/asm-alpha/system.h
index cc9c7e8..f3b7b1a 100644
--- a/include/asm-alpha/system.h
+++ b/include/asm-alpha/system.h
@@ -572,7 +572,7 @@
if something tries to do an invalid cmpxchg(). */
extern void __cmpxchg_called_with_bad_pointer(void);
-static inline unsigned long
+static __always_inline unsigned long
__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
{
switch (size) {
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index f5bcc9a..b726acf 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -116,7 +116,11 @@
->offset[((vaddr)&4095)>>2]
#define __REG32(paddr) __REGV32(io_p2v(paddr))
-extern void omap_map_common_io(void);
+extern void omap1_map_common_io(void);
+extern void omap1_init_common_hw(void);
+
+extern void omap2_map_common_io(void);
+extern void omap2_init_common_hw(void);
#else
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S
index abfbe45..5f8223e 100644
--- a/include/asm-arm/arch-s3c2410/debug-macro.S
+++ b/include/asm-arm/arch-s3c2410/debug-macro.S
@@ -25,7 +25,7 @@
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
- ldreq \rx, = S3C2410_PA_UART
+ ldreq \rx, = S3C24XX_PA_UART
ldrne \rx, = S3C24XX_VA_UART
#if CONFIG_DEBUG_S3C2410_UART != 0
add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART)
@@ -44,7 +44,7 @@
1003:
mrc p15, 0, \rd, c1, c0
tst \rd, #1
- addeq \rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART)
+ addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
@@ -75,7 +75,7 @@
1003:
mrc p15, 0, \rd, c1, c0
tst \rd, #1
- addeq \rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART)
+ addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h
index 1c9de29..a2330bf 100644
--- a/include/asm-arm/arch-s3c2410/hardware.h
+++ b/include/asm-arm/arch-s3c2410/hardware.h
@@ -17,6 +17,7 @@
* 14-Sep-2004 BJD Added misccr and getpin to gpio
* 01-Oct-2004 BJD Added the new gpio functions
* 16-Oct-2004 BJD Removed the clock variables
+ * 15-Jan-2006 LCVR Added s3c2400_gpio_getirq()
*/
#ifndef __ASM_ARCH_HARDWARE_H
@@ -55,6 +56,12 @@
extern int s3c2410_gpio_getirq(unsigned int pin);
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_gpio_getirq(unsigned int pin);
+
+#endif /* CONFIG_CPU_S3C2400 */
+
/* s3c2410_gpio_irqfilter
*
* set the irq filtering on the given pin
diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h
index 1833ea5..c380d26 100644
--- a/include/asm-arm/arch-s3c2410/map.h
+++ b/include/asm-arm/arch-s3c2410/map.h
@@ -14,6 +14,7 @@
* 06-Jan-2003 BJD Linux 2.6.0 version, moved bast specifics out
* 10-Feb-2005 BJD Added CAMIF definition from guillaume.gourat@nexvision.tv
* 10-Mar-2005 LCVR Added support to S3C2400, changed {VA,SZ} names
+ * 15-Jan-2006 LCVR Added S3C24XX_PA macros for common S3C24XX resources
*/
#ifndef __ASM_ARCH_MAP_H
@@ -188,5 +189,42 @@
#define S3C2400_SDRAM_PA (S3C2400_CS6)
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#ifdef CONFIG_CPU_S3C2400
+#define S3C24XX_PA_IRQ S3C2400_PA_IRQ
+#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST
+#define S3C24XX_PA_DMA S3C2400_PA_DMA
+#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR
+#define S3C24XX_PA_LCD S3C2400_PA_LCD
+#define S3C24XX_PA_UART S3C2400_PA_UART
+#define S3C24XX_PA_TIMER S3C2400_PA_TIMER
+#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG
+#define S3C24XX_PA_IIC S3C2400_PA_IIC
+#define S3C24XX_PA_IIS S3C2400_PA_IIS
+#define S3C24XX_PA_GPIO S3C2400_PA_GPIO
+#define S3C24XX_PA_RTC S3C2400_PA_RTC
+#define S3C24XX_PA_ADC S3C2400_PA_ADC
+#define S3C24XX_PA_SPI S3C2400_PA_SPI
+#else
+#define S3C24XX_PA_IRQ S3C2410_PA_IRQ
+#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST
+#define S3C24XX_PA_DMA S3C2410_PA_DMA
+#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
+#define S3C24XX_PA_LCD S3C2410_PA_LCD
+#define S3C24XX_PA_UART S3C2410_PA_UART
+#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
+#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
+#define S3C24XX_PA_IIC S3C2410_PA_IIC
+#define S3C24XX_PA_IIS S3C2410_PA_IIS
+#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
+#define S3C24XX_PA_RTC S3C2410_PA_RTC
+#define S3C24XX_PA_ADC S3C2410_PA_ADC
+#define S3C24XX_PA_SPI S3C2410_PA_SPI
+#endif
#endif /* __ASM_ARCH_MAP_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index 7f1be48..9697f93 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -22,6 +22,7 @@
* 28-Mar-2005 LCVR Fixed definition of GPB10
* 26-Oct-2005 BJD Added generic configuration types
* 27-Nov-2005 LCVR Added definitions to S3C2400 registers
+ * 15-Jan-2006 LCVR Written S3C24XX_GPIO_BASE() macro
*/
@@ -39,6 +40,27 @@
#define S3C2410_GPIO_BANKG (32*6)
#define S3C2410_GPIO_BANKH (32*7)
+#ifdef CONFIG_CPU_S3C2400
+#define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x)
+#define S3C24XX_MISCCR S3C2400_MISCCR
+#else
+#define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x)
+#define S3C24XX_MISCCR S3C2410_MISCCR
+#endif /* CONFIG_CPU_S3C2400 */
+
+
+/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
+
+#define S3C2400_BANKNUM(pin) (((pin) & ~31) / 32)
+#define S3C2400_BASEA2B(pin) ((((pin) & ~31) >> 2))
+#define S3C2400_BASEC2H(pin) ((S3C2400_BANKNUM(pin) * 10) + \
+ (2 * (S3C2400_BANKNUM(pin)-2)))
+
+#define S3C2400_GPIO_BASE(pin) (pin < S3C2410_GPIO_BANKC ? \
+ S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
+ S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
+
+
#define S3C2410_GPIO_BASE(pin) ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h
index ce1bbba..83b0125 100644
--- a/include/asm-arm/arch-s3c2410/regs-serial.h
+++ b/include/asm-arm/arch-s3c2410/regs-serial.h
@@ -39,9 +39,9 @@
#define S3C24XX_VA_UART1 (S3C24XX_VA_UART + 0x4000 )
#define S3C24XX_VA_UART2 (S3C24XX_VA_UART + 0x8000 )
-#define S3C2410_PA_UART0 (S3C2410_PA_UART)
-#define S3C2410_PA_UART1 (S3C2410_PA_UART + 0x4000 )
-#define S3C2410_PA_UART2 (S3C2410_PA_UART + 0x8000 )
+#define S3C2410_PA_UART0 (S3C24XX_PA_UART)
+#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 )
+#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 )
#define S3C2410_URXH (0x24)
#define S3C2410_UTXH (0x20)
diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h
index ddd1578..4367ec0 100644
--- a/include/asm-arm/arch-s3c2410/uncompress.h
+++ b/include/asm-arm/arch-s3c2410/uncompress.h
@@ -35,13 +35,13 @@
#undef S3C2410_GPIOREG
#undef S3C2410_WDOGREG
-#define S3C2410_GPIOREG(x) ((S3C2410_PA_GPIO + (x)))
-#define S3C2410_WDOGREG(x) ((S3C2410_PA_WATCHDOG + (x)))
+#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
/* how many bytes we allow into the FIFO at a time in FIFO mode */
#define FIFO_MAX (14)
-#define uart_base S3C2410_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
+#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
static __inline__ void
uart_wr(unsigned int reg, unsigned int val)
diff --git a/include/asm-arm/checksum.h b/include/asm-arm/checksum.h
index d4256d5..747bdd3 100644
--- a/include/asm-arm/checksum.h
+++ b/include/asm-arm/checksum.h
@@ -77,7 +77,7 @@
mov %0, %0, lsr #16"
: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1)
: "1" (iph), "2" (ihl)
- : "cc");
+ : "cc", "memory");
return sum;
}
diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h
index 3351b77..e8ea67c 100644
--- a/include/asm-arm/mach/map.h
+++ b/include/asm-arm/mach/map.h
@@ -26,6 +26,7 @@
#define MT_MEMORY 5
#define MT_ROM 6
#define MT_IXP2000_DEVICE 7
+#define MT_NONSHARED_DEVICE 8
extern void create_memmap_holes(struct meminfo *);
extern void memtable_init(struct meminfo *);
diff --git a/include/asm-arm/mutex.h b/include/asm-arm/mutex.h
index 6caa59f..cb29d84 100644
--- a/include/asm-arm/mutex.h
+++ b/include/asm-arm/mutex.h
@@ -23,72 +23,71 @@
* simply bail out immediately through the slow path where the lock will be
* reattempted until it succeeds.
*/
-#define __mutex_fastpath_lock(count, fail_fn) \
-do { \
- int __ex_flag, __res; \
- \
- typecheck(atomic_t *, count); \
- typecheck_fn(fastcall void (*)(atomic_t *), fail_fn); \
- \
- __asm__ ( \
- "ldrex %0, [%2] \n" \
- "sub %0, %0, #1 \n" \
- "strex %1, %0, [%2] \n" \
- \
- : "=&r" (__res), "=&r" (__ex_flag) \
- : "r" (&(count)->counter) \
- : "cc","memory" ); \
- \
- if (unlikely(__res || __ex_flag)) \
- fail_fn(count); \
-} while (0)
+static inline void
+__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+{
+ int __ex_flag, __res;
-#define __mutex_fastpath_lock_retval(count, fail_fn) \
-({ \
- int __ex_flag, __res; \
- \
- typecheck(atomic_t *, count); \
- typecheck_fn(fastcall int (*)(atomic_t *), fail_fn); \
- \
- __asm__ ( \
- "ldrex %0, [%2] \n" \
- "sub %0, %0, #1 \n" \
- "strex %1, %0, [%2] \n" \
- \
- : "=&r" (__res), "=&r" (__ex_flag) \
- : "r" (&(count)->counter) \
- : "cc","memory" ); \
- \
- __res |= __ex_flag; \
- if (unlikely(__res != 0)) \
- __res = fail_fn(count); \
- __res; \
-})
+ __asm__ (
+
+ "ldrex %0, [%2] \n\t"
+ "sub %0, %0, #1 \n\t"
+ "strex %1, %0, [%2] "
+
+ : "=&r" (__res), "=&r" (__ex_flag)
+ : "r" (&(count)->counter)
+ : "cc","memory" );
+
+ __res |= __ex_flag;
+ if (unlikely(__res != 0))
+ fail_fn(count);
+}
+
+static inline int
+__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *))
+{
+ int __ex_flag, __res;
+
+ __asm__ (
+
+ "ldrex %0, [%2] \n\t"
+ "sub %0, %0, #1 \n\t"
+ "strex %1, %0, [%2] "
+
+ : "=&r" (__res), "=&r" (__ex_flag)
+ : "r" (&(count)->counter)
+ : "cc","memory" );
+
+ __res |= __ex_flag;
+ if (unlikely(__res != 0))
+ __res = fail_fn(count);
+ return __res;
+}
/*
* Same trick is used for the unlock fast path. However the original value,
* rather than the result, is used to test for success in order to have
* better generated assembly.
*/
-#define __mutex_fastpath_unlock(count, fail_fn) \
-do { \
- int __ex_flag, __res, __orig; \
- \
- typecheck(atomic_t *, count); \
- typecheck_fn(fastcall void (*)(atomic_t *), fail_fn); \
- \
- __asm__ ( \
- "ldrex %0, [%3] \n" \
- "add %1, %0, #1 \n" \
- "strex %2, %1, [%3] \n" \
- \
- : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) \
- : "r" (&(count)->counter) \
- : "cc","memory" ); \
- \
- if (unlikely(__orig || __ex_flag)) \
- fail_fn(count); \
-} while (0)
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+{
+ int __ex_flag, __res, __orig;
+
+ __asm__ (
+
+ "ldrex %0, [%3] \n\t"
+ "add %1, %0, #1 \n\t"
+ "strex %2, %1, [%3] "
+
+ : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
+ : "r" (&(count)->counter)
+ : "cc","memory" );
+
+ __orig |= __ex_flag;
+ if (unlikely(__orig != 0))
+ fail_fn(count);
+}
/*
* If the unlock was done on a contended lock, or if the unlock simply fails
@@ -110,12 +109,12 @@
__asm__ (
- "1: ldrex %0, [%3] \n"
- "subs %1, %0, #1 \n"
- "strexeq %2, %1, [%3] \n"
- "movlt %0, #0 \n"
- "cmpeq %2, #0 \n"
- "bgt 1b \n"
+ "1: ldrex %0, [%3] \n\t"
+ "subs %1, %0, #1 \n\t"
+ "strexeq %2, %1, [%3] \n\t"
+ "movlt %0, #0 \n\t"
+ "cmpeq %2, #0 \n\t"
+ "bgt 1b "
: "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
: "r" (&count->counter)
diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
index 5a0d19b..70e00d0 100644
--- a/include/asm-arm/pgtable.h
+++ b/include/asm-arm/pgtable.h
@@ -168,6 +168,7 @@
#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
+#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2))
/*
* - coarse table (not used)
diff --git a/include/asm-arm26/bitops.h b/include/asm-arm26/bitops.h
index 15cc6f2..d87f863 100644
--- a/include/asm-arm26/bitops.h
+++ b/include/asm-arm26/bitops.h
@@ -186,7 +186,7 @@
extern int _test_and_set_bit_le(int nr, volatile unsigned long * p);
extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p);
extern int _test_and_change_bit_le(int nr, volatile unsigned long * p);
-extern int _find_first_zero_bit_le(void * p, unsigned size);
+extern int _find_first_zero_bit_le(const unsigned long * p, unsigned size);
extern int _find_next_zero_bit_le(void * p, int size, int offset);
extern int _find_first_bit_le(const unsigned long *p, unsigned size);
extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
@@ -326,7 +326,7 @@
#define minix_test_and_clear_bit(nr,p) \
__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
#define minix_find_first_zero_bit(p,sz) \
- _find_first_zero_bit_le(p,sz)
+ _find_first_zero_bit_le((unsigned long *)(p),sz)
#endif /* __KERNEL__ */
diff --git a/include/asm-arm26/hardirq.h b/include/asm-arm26/hardirq.h
index dc28daa..87c19d2 100644
--- a/include/asm-arm26/hardirq.h
+++ b/include/asm-arm26/hardirq.h
@@ -4,6 +4,7 @@
#include <linux/config.h>
#include <linux/cache.h>
#include <linux/threads.h>
+#include <asm/irq.h>
typedef struct {
unsigned int __softirq_pending;
@@ -26,13 +27,6 @@
extern asmlinkage void __do_softirq(void);
-#define irq_exit() \
- do { \
- preempt_count() -= IRQ_EXIT_OFFSET; \
- if (!in_interrupt() && local_softirq_pending()) \
- __do_softirq(); \
- preempt_enable_no_resched(); \
- } while (0)
#endif
diff --git a/include/asm-arm26/posix_types.h b/include/asm-arm26/posix_types.h
index b88344a..f8d1eb4 100644
--- a/include/asm-arm26/posix_types.h
+++ b/include/asm-arm26/posix_types.h
@@ -44,6 +44,7 @@
typedef unsigned short __kernel_old_uid_t;
typedef unsigned short __kernel_old_gid_t;
+typedef unsigned short __kernel_old_dev_t;
#ifdef __GNUC__
typedef long long __kernel_loff_t;
diff --git a/include/asm-arm26/system.h b/include/asm-arm26/system.h
index ca4ccfc..7028849 100644
--- a/include/asm-arm26/system.h
+++ b/include/asm-arm26/system.h
@@ -98,9 +98,8 @@
* spin_unlock_irq() and friends are implemented. This avoids
* us needlessly decrementing and incrementing the preempt count.
*/
-#define prepare_arch_switch(rq,next) local_irq_enable()
-#define finish_arch_switch(rq,prev) spin_unlock(&(rq)->lock)
-#define task_running(rq,p) ((rq)->curr == (p))
+#define prepare_arch_switch(next) local_irq_enable()
+#define finish_arch_switch(prev) spin_unlock(&(rq)->lock)
/*
* switch_to(prev, next) should switch from task `prev' to `next'
diff --git a/include/asm-cris/bitops.h b/include/asm-cris/bitops.h
index d3eb0f1..b7fef15 100644
--- a/include/asm-cris/bitops.h
+++ b/include/asm-cris/bitops.h
@@ -290,7 +290,7 @@
tmp = *p;
found_first:
- tmp |= ~0UL >> size;
+ tmp |= ~0UL << size;
found_middle:
return result + ffz(tmp);
}
diff --git a/include/asm-frv/bitops.h b/include/asm-frv/bitops.h
index 02be7b3..f686b51 100644
--- a/include/asm-frv/bitops.h
+++ b/include/asm-frv/bitops.h
@@ -209,7 +209,7 @@
tmp = *p;
found_first:
- tmp |= ~0UL >> size;
+ tmp |= ~0UL << size;
found_middle:
return result + ffz(tmp);
}
diff --git a/include/asm-h8300/bitops.h b/include/asm-h8300/bitops.h
index c0411ec..ff7c2b7 100644
--- a/include/asm-h8300/bitops.h
+++ b/include/asm-h8300/bitops.h
@@ -227,7 +227,7 @@
tmp = *p;
found_first:
- tmp |= ~0UL >> size;
+ tmp |= ~0UL << size;
found_middle:
return result + ffz(tmp);
}
diff --git a/include/asm-i386/acpi.h b/include/asm-i386/acpi.h
index df4ed32..55059ab 100644
--- a/include/asm-i386/acpi.h
+++ b/include/asm-i386/acpi.h
@@ -179,7 +179,7 @@
extern u8 x86_acpiid_to_apicid[];
-#define ARCH_HAS_POWER_PDC_INIT 1
+#define ARCH_HAS_POWER_INIT 1
#endif /*__KERNEL__*/
diff --git a/include/asm-i386/page.h b/include/asm-i386/page.h
index 73296d9..997ca5d 100644
--- a/include/asm-i386/page.h
+++ b/include/asm-i386/page.h
@@ -110,10 +110,10 @@
#endif /* __ASSEMBLY__ */
#ifdef __ASSEMBLY__
-#define __PAGE_OFFSET (0xC0000000)
+#define __PAGE_OFFSET CONFIG_PAGE_OFFSET
#define __PHYSICAL_START CONFIG_PHYSICAL_START
#else
-#define __PAGE_OFFSET (0xC0000000UL)
+#define __PAGE_OFFSET ((unsigned long)CONFIG_PAGE_OFFSET)
#define __PHYSICAL_START ((unsigned long)CONFIG_PHYSICAL_START)
#endif
#define __KERNEL_START (__PAGE_OFFSET + __PHYSICAL_START)
diff --git a/include/asm-i386/system.h b/include/asm-i386/system.h
index 36a92ed..399145a 100644
--- a/include/asm-i386/system.h
+++ b/include/asm-i386/system.h
@@ -507,7 +507,7 @@
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
-#define set_mb(var, value) do { xchg(&var, value); } while (0)
+#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
#else
#define smp_mb() barrier()
#define smp_rmb() barrier()
diff --git a/include/asm-i386/topology.h b/include/asm-i386/topology.h
index d7e19eb..af503a1 100644
--- a/include/asm-i386/topology.h
+++ b/include/asm-i386/topology.h
@@ -27,6 +27,15 @@
#ifndef _ASM_I386_TOPOLOGY_H
#define _ASM_I386_TOPOLOGY_H
+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu) \
+ (phys_proc_id[cpu] == BAD_APICID ? -1 : phys_proc_id[cpu])
+#define topology_core_id(cpu) \
+ (cpu_core_id[cpu] == BAD_APICID ? 0 : cpu_core_id[cpu])
+#define topology_core_siblings(cpu) (cpu_core_map[cpu])
+#define topology_thread_siblings(cpu) (cpu_sibling_map[cpu])
+#endif
+
#ifdef CONFIG_NUMA
#include <asm/mpspec.h>
diff --git a/include/asm-i386/unistd.h b/include/asm-i386/unistd.h
index 597496e..cf6f2cd 100644
--- a/include/asm-i386/unistd.h
+++ b/include/asm-i386/unistd.h
@@ -315,8 +315,9 @@
#define __NR_faccessat 307
#define __NR_pselect6 308
#define __NR_ppoll 309
+#define __NR_unshare 310
-#define NR_syscalls 310
+#define NR_syscalls 311
/*
* user-visible error numbers are in the range -1 - -128: see
diff --git a/include/asm-ia64/ide.h b/include/asm-ia64/ide.h
index e62b953..93f45c5 100644
--- a/include/asm-ia64/ide.h
+++ b/include/asm-ia64/ide.h
@@ -17,14 +17,6 @@
#include <linux/irq.h>
-#ifndef MAX_HWIFS
-# ifdef CONFIG_PCI
-#define MAX_HWIFS 10
-# else
-#define MAX_HWIFS 6
-# endif
-#endif
-
#define IDE_ARCH_OBSOLETE_DEFAULTS
static inline int ide_default_irq(unsigned long base)
diff --git a/include/asm-ia64/processor.h b/include/asm-ia64/processor.h
index 09b9902..23c8e1b 100644
--- a/include/asm-ia64/processor.h
+++ b/include/asm-ia64/processor.h
@@ -559,6 +559,23 @@
#define cpu_relax() ia64_hint(ia64_hint_pause)
+static inline int
+ia64_get_irr(unsigned int vector)
+{
+ unsigned int reg = vector / 64;
+ unsigned int bit = vector % 64;
+ u64 irr;
+
+ switch (reg) {
+ case 0: irr = ia64_getreg(_IA64_REG_CR_IRR0); break;
+ case 1: irr = ia64_getreg(_IA64_REG_CR_IRR1); break;
+ case 2: irr = ia64_getreg(_IA64_REG_CR_IRR2); break;
+ case 3: irr = ia64_getreg(_IA64_REG_CR_IRR3); break;
+ }
+
+ return test_bit(bit, &irr);
+}
+
static inline void
ia64_set_lrr0 (unsigned long val)
{
diff --git a/include/asm-ia64/sal.h b/include/asm-ia64/sal.h
index 313cad0..0b210ab 100644
--- a/include/asm-ia64/sal.h
+++ b/include/asm-ia64/sal.h
@@ -658,15 +658,7 @@
return isrv.status;
}
-/* Flush all the processor and platform level instruction and/or data caches */
-static inline s64
-ia64_sal_cache_flush (u64 cache_type)
-{
- struct ia64_sal_retval isrv;
- SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
- return isrv.status;
-}
-
+extern s64 ia64_sal_cache_flush (u64 cache_type);
/* Initialize all the processor and platform level instruction and data caches */
static inline s64
diff --git a/include/asm-ia64/sn/bte.h b/include/asm-ia64/sn/bte.h
index f50da3d..01e5b41 100644
--- a/include/asm-ia64/sn/bte.h
+++ b/include/asm-ia64/sn/bte.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
*/
@@ -100,13 +100,28 @@
#define BTE_LNSTAT_STORE(_bte, _x) \
HUB_S(_bte->bte_base_addr, (_x))
#define BTE_SRC_STORE(_bte, _x) \
- HUB_S(_bte->bte_source_addr, (_x))
+({ \
+ u64 __addr = ((_x) & ~AS_MASK); \
+ if (is_shub2()) \
+ __addr = SH2_TIO_PHYS_TO_DMA(__addr); \
+ HUB_S(_bte->bte_source_addr, __addr); \
+})
#define BTE_DEST_STORE(_bte, _x) \
- HUB_S(_bte->bte_destination_addr, (_x))
+({ \
+ u64 __addr = ((_x) & ~AS_MASK); \
+ if (is_shub2()) \
+ __addr = SH2_TIO_PHYS_TO_DMA(__addr); \
+ HUB_S(_bte->bte_destination_addr, __addr); \
+})
#define BTE_CTRL_STORE(_bte, _x) \
HUB_S(_bte->bte_control_addr, (_x))
#define BTE_NOTIF_STORE(_bte, _x) \
- HUB_S(_bte->bte_notify_addr, (_x))
+({ \
+ u64 __addr = ia64_tpa((_x) & ~AS_MASK); \
+ if (is_shub2()) \
+ __addr = SH2_TIO_PHYS_TO_DMA(__addr); \
+ HUB_S(_bte->bte_notify_addr, __addr); \
+})
#define BTE_START_TRANSFER(_bte, _len, _mode) \
is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \
diff --git a/include/asm-ia64/sn/intr.h b/include/asm-ia64/sn/intr.h
index a343137..60a51a4 100644
--- a/include/asm-ia64/sn/intr.h
+++ b/include/asm-ia64/sn/intr.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_INTR_H
@@ -11,26 +11,26 @@
#include <linux/rcupdate.h>
-#define SGI_UART_VECTOR (0xe9)
+#define SGI_UART_VECTOR 0xe9
/* Reserved IRQs : Note, not to exceed IA64_SN2_FIRST_DEVICE_VECTOR */
-#define SGI_XPC_ACTIVATE (0x30)
-#define SGI_II_ERROR (0x31)
-#define SGI_XBOW_ERROR (0x32)
-#define SGI_PCIASIC_ERROR (0x33)
-#define SGI_ACPI_SCI_INT (0x34)
-#define SGI_TIOCA_ERROR (0x35)
-#define SGI_TIO_ERROR (0x36)
-#define SGI_TIOCX_ERROR (0x37)
-#define SGI_MMTIMER_VECTOR (0x38)
-#define SGI_XPC_NOTIFY (0xe7)
+#define SGI_XPC_ACTIVATE 0x30
+#define SGI_II_ERROR 0x31
+#define SGI_XBOW_ERROR 0x32
+#define SGI_PCIASIC_ERROR 0x33
+#define SGI_ACPI_SCI_INT 0x34
+#define SGI_TIOCA_ERROR 0x35
+#define SGI_TIO_ERROR 0x36
+#define SGI_TIOCX_ERROR 0x37
+#define SGI_MMTIMER_VECTOR 0x38
+#define SGI_XPC_NOTIFY 0xe7
-#define IA64_SN2_FIRST_DEVICE_VECTOR (0x3c)
-#define IA64_SN2_LAST_DEVICE_VECTOR (0xe6)
+#define IA64_SN2_FIRST_DEVICE_VECTOR 0x3c
+#define IA64_SN2_LAST_DEVICE_VECTOR 0xe6
-#define SN2_IRQ_RESERVED (0x1)
-#define SN2_IRQ_CONNECTED (0x2)
-#define SN2_IRQ_SHARED (0x4)
+#define SN2_IRQ_RESERVED 0x1
+#define SN2_IRQ_CONNECTED 0x2
+#define SN2_IRQ_SHARED 0x4
// The SN PROM irq struct
struct sn_irq_info {
diff --git a/include/asm-ia64/sn/sn_feature_sets.h b/include/asm-ia64/sn/sn_feature_sets.h
index e68a808..9ca642c 100644
--- a/include/asm-ia64/sn/sn_feature_sets.h
+++ b/include/asm-ia64/sn/sn_feature_sets.h
@@ -8,7 +8,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2005 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (c) 2005-2006 Silicon Graphics, Inc. All rights reserved.
*/
@@ -27,14 +27,12 @@
* "false" for new features.
*
* Use:
- * if (sn_prom_feature_available(PRF_FEATURE_XXX))
+ * if (sn_prom_feature_available(PRF_XXX))
* ...
*/
-/*
- * Example: feature XXX
- */
-#define PRF_FEATURE_XXX 0
+#define PRF_PAL_CACHE_FLUSH_SAFE 0
+#define PRF_DEVICE_FLUSH_LIST 1
@@ -51,7 +49,7 @@
*
* By default, features are disabled unless explicitly enabled.
*/
-#define OSF_MCA_SLV_TO_OS_INIT_SLV 0
-#define OSF_FEAT_LOG_SBES 1
+#define OSF_MCA_SLV_TO_OS_INIT_SLV 0
+#define OSF_FEAT_LOG_SBES 1
#endif /* _ASM_IA64_SN_FEATURE_SETS_H */
diff --git a/include/asm-ia64/system.h b/include/asm-ia64/system.h
index 80c5a23..0625387 100644
--- a/include/asm-ia64/system.h
+++ b/include/asm-ia64/system.h
@@ -249,32 +249,7 @@
# define switch_to(prev,next,last) __switch_to(prev, next, last)
#endif
-/*
- * On IA-64, we don't want to hold the runqueue's lock during the low-level context-switch,
- * because that could cause a deadlock. Here is an example by Erich Focht:
- *
- * Example:
- * CPU#0:
- * schedule()
- * -> spin_lock_irq(&rq->lock)
- * -> context_switch()
- * -> wrap_mmu_context()
- * -> read_lock(&tasklist_lock)
- *
- * CPU#1:
- * sys_wait4() or release_task() or forget_original_parent()
- * -> write_lock(&tasklist_lock)
- * -> do_notify_parent()
- * -> wake_up_parent()
- * -> try_to_wake_up()
- * -> spin_lock_irq(&parent_rq->lock)
- *
- * If the parent's rq happens to be on CPU#0, we'll wait for the rq->lock
- * of that CPU which will not be released, because there we wait for the
- * tasklist_lock to become available.
- */
#define __ARCH_WANT_UNLOCKED_CTXSW
-
#define ARCH_HAS_PREFETCH_SWITCH_STACK
#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
diff --git a/include/asm-ia64/topology.h b/include/asm-ia64/topology.h
index 412ef8e..3ee19df 100644
--- a/include/asm-ia64/topology.h
+++ b/include/asm-ia64/topology.h
@@ -102,6 +102,13 @@
#endif /* CONFIG_NUMA */
+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu) (cpu_data(cpu)->socket_id)
+#define topology_core_id(cpu) (cpu_data(cpu)->core_id)
+#define topology_core_siblings(cpu) (cpu_core_map[cpu])
+#define topology_thread_siblings(cpu) (cpu_sibling_map[cpu])
+#endif
+
#include <asm-generic/topology.h>
#endif /* _ASM_IA64_TOPOLOGY_H */
diff --git a/include/asm-m68knommu/hardirq.h b/include/asm-m68knommu/hardirq.h
index e8659e7..476180f 100644
--- a/include/asm-m68knommu/hardirq.h
+++ b/include/asm-m68knommu/hardirq.h
@@ -4,6 +4,7 @@
#include <linux/config.h>
#include <linux/cache.h>
#include <linux/threads.h>
+#include <asm/irq.h>
typedef struct {
unsigned int __softirq_pending;
diff --git a/include/asm-mips/abi.h b/include/asm-mips/abi.h
index 2e7e651..1ce0518 100644
--- a/include/asm-mips/abi.h
+++ b/include/asm-mips/abi.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2005 by Ralf Baechle
+ * Copyright (C) 2005, 06 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2005 MIPS Technologies, Inc.
*/
#ifndef _ASM_ABI_H
@@ -13,7 +13,7 @@
#include <asm/siginfo.h>
struct mips_abi {
- int (* const do_signal)(sigset_t *oldset, struct pt_regs *regs);
+ void (* const do_signal)(struct pt_regs *regs);
int (* const setup_frame)(struct k_sigaction * ka,
struct pt_regs *regs, int signr,
sigset_t *set);
diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h
index 3b0c8aa..8e80205 100644
--- a/include/asm-mips/bitops.h
+++ b/include/asm-mips/bitops.h
@@ -644,44 +644,6 @@
}
/*
- * flz - find last zero in word.
- * @word: The word to search
- *
- * Returns 0..SZLONG-1
- * Undefined if no zero exists, so code should check against ~0UL first.
- */
-static inline unsigned long flz(unsigned long word)
-{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
- return __ilog2(~word);
-#else
-#ifdef CONFIG_32BIT
- int r = 31, s;
- word = ~word;
- s = 16; if ((word & 0xffff0000)) s = 0; r -= s; word <<= s;
- s = 8; if ((word & 0xff000000)) s = 0; r -= s; word <<= s;
- s = 4; if ((word & 0xf0000000)) s = 0; r -= s; word <<= s;
- s = 2; if ((word & 0xc0000000)) s = 0; r -= s; word <<= s;
- s = 1; if ((word & 0x80000000)) s = 0; r -= s;
-
- return r;
-#endif
-#ifdef CONFIG_64BIT
- int r = 63, s;
- word = ~word;
- s = 32; if ((word & 0xffffffff00000000UL)) s = 0; r -= s; word <<= s;
- s = 16; if ((word & 0xffff000000000000UL)) s = 0; r -= s; word <<= s;
- s = 8; if ((word & 0xff00000000000000UL)) s = 0; r -= s; word <<= s;
- s = 4; if ((word & 0xf000000000000000UL)) s = 0; r -= s; word <<= s;
- s = 2; if ((word & 0xc000000000000000UL)) s = 0; r -= s; word <<= s;
- s = 1; if ((word & 0x8000000000000000UL)) s = 0; r -= s;
-
- return r;
-#endif
-#endif
-}
-
-/*
* fls - find last bit set.
* @word: The word to search
*
@@ -690,11 +652,55 @@
*/
static inline unsigned long fls(unsigned long word)
{
+#ifdef CONFIG_32BIT
+#ifdef CONFIG_CPU_MIPS32
+ __asm__ ("clz %0, %1" : "=r" (word) : "r" (word));
+
+ return 32 - word;
+#else
+ {
+ int r = 32, s;
+
if (word == 0)
return 0;
- return flz(~word) + 1;
+ s = 16; if ((word & 0xffff0000)) s = 0; r -= s; word <<= s;
+ s = 8; if ((word & 0xff000000)) s = 0; r -= s; word <<= s;
+ s = 4; if ((word & 0xf0000000)) s = 0; r -= s; word <<= s;
+ s = 2; if ((word & 0xc0000000)) s = 0; r -= s; word <<= s;
+ s = 1; if ((word & 0x80000000)) s = 0; r -= s;
+
+ return r;
+ }
+#endif
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+#ifdef CONFIG_CPU_MIPS64
+
+ __asm__ ("dclz %0, %1" : "=r" (word) : "r" (word));
+
+ return 64 - word;
+#else
+ {
+ int r = 64, s;
+
+ if (word == 0)
+ return 0;
+
+ s = 32; if ((word & 0xffffffff00000000UL)) s = 0; r -= s; word <<= s;
+ s = 16; if ((word & 0xffff000000000000UL)) s = 0; r -= s; word <<= s;
+ s = 8; if ((word & 0xff00000000000000UL)) s = 0; r -= s; word <<= s;
+ s = 4; if ((word & 0xf000000000000000UL)) s = 0; r -= s; word <<= s;
+ s = 2; if ((word & 0xc000000000000000UL)) s = 0; r -= s; word <<= s;
+ s = 1; if ((word & 0x8000000000000000UL)) s = 0; r -= s;
+
+ return r;
+ }
+#endif
+#endif /* CONFIG_64BIT */
}
+
#define fls64(x) generic_fls64(x)
/*
diff --git a/include/asm-mips/byteorder.h b/include/asm-mips/byteorder.h
index d1fe9e5c..584f812 100644
--- a/include/asm-mips/byteorder.h
+++ b/include/asm-mips/byteorder.h
@@ -8,10 +8,39 @@
#ifndef _ASM_BYTEORDER_H
#define _ASM_BYTEORDER_H
+#include <linux/config.h>
+#include <linux/compiler.h>
#include <asm/types.h>
#ifdef __GNUC__
+#ifdef CONFIG_CPU_MIPSR2
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
+{
+ __asm__(
+ " wsbh %0, %1 \n"
+ : "=r" (x)
+ : "r" (x));
+
+ return x;
+}
+#define __arch__swab16(x) ___arch__swab16(x)
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+ __asm__(
+ " wsbh %0, %1 \n"
+ " rotr %0, %0, 16 \n"
+ : "=r" (x)
+ : "r" (x));
+
+ return x;
+}
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#endif /* CONFIG_CPU_MIPSR2 */
+
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __BYTEORDER_HAS_U64__
# define __SWAB_64_THRU_32__
diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h
index a18ba2e..aeae9fa 100644
--- a/include/asm-mips/cacheflush.h
+++ b/include/asm-mips/cacheflush.h
@@ -49,8 +49,7 @@
extern void (*flush_icache_page)(struct vm_area_struct *vma,
struct page *page);
-extern void (*flush_icache_range)(unsigned long __user start,
- unsigned long __user end);
+extern void (*flush_icache_range)(unsigned long start, unsigned long end);
#define flush_cache_vmap(start, end) flush_cache_all()
#define flush_cache_vunmap(start, end) flush_cache_all()
diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h
index 2fc9063..6111a0c 100644
--- a/include/asm-mips/hazards.h
+++ b/include/asm-mips/hazards.h
@@ -100,7 +100,7 @@
__asm__(
" .macro _ssnop \n\t"
- " sll $0, $2, 1 \n\t"
+ " sll $0, $0, 1 \n\t"
" .endm \n\t"
" \n\t"
" .macro _ehb \n\t"
diff --git a/include/asm-mips/interrupt.h b/include/asm-mips/interrupt.h
index abdf54e..7743487 100644
--- a/include/asm-mips/interrupt.h
+++ b/include/asm-mips/interrupt.h
@@ -47,6 +47,17 @@
* R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
* no nops at all.
*/
+/*
+ * For TX49, operating only IE bit is not enough.
+ *
+ * If mfc0 $12 follows store and the mfc0 is last instruction of a
+ * page and fetching the next instruction causes TLB miss, the result
+ * of the mfc0 might wrongly contain EXL bit.
+ *
+ * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
+ *
+ * Workaround: mask EXL bit of the result or place a nop before mfc0.
+ */
__asm__ (
" .macro local_irq_disable\n"
" .set push \n"
@@ -55,8 +66,8 @@
" di \n"
#else
" mfc0 $1,$12 \n"
- " ori $1,1 \n"
- " xori $1,1 \n"
+ " ori $1,0x1f \n"
+ " xori $1,0x1f \n"
" .set noreorder \n"
" mtc0 $1,$12 \n"
#endif
@@ -96,8 +107,8 @@
" andi \\result, 1 \n"
#else
" mfc0 \\result, $12 \n"
- " ori $1, \\result, 1 \n"
- " xori $1, 1 \n"
+ " ori $1, \\result, 0x1f \n"
+ " xori $1, 0x1f \n"
" .set noreorder \n"
" mtc0 $1, $12 \n"
#endif
@@ -114,6 +125,7 @@
__asm__ (
" .macro local_irq_restore flags \n"
+ " .set push \n"
" .set noreorder \n"
" .set noat \n"
#if defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
@@ -135,14 +147,13 @@
#else
" mfc0 $1, $12 \n"
" andi \\flags, 1 \n"
- " ori $1, 1 \n"
- " xori $1, 1 \n"
+ " ori $1, 0x1f \n"
+ " xori $1, 0x1f \n"
" or \\flags, $1 \n"
" mtc0 \\flags, $12 \n"
#endif
" irq_disable_hazard \n"
- " .set at \n"
- " .set reorder \n"
+ " .set pop \n"
" .endm \n");
#define local_irq_restore(flags) \
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
index d426857..5a4c8a5 100644
--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -18,7 +18,6 @@
#include <linux/types.h>
#include <asm/addrspace.h>
-#include <asm/bug.h>
#include <asm/byteorder.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
@@ -57,38 +56,38 @@
* variations of functions: non-prefixed ones that preserve the value
* and prefixed ones that preserve byte addresses. The latters are
* typically used for moving raw data between a peripheral and memory (cf.
- * string I/O functions), hence the "mem_" prefix.
+ * string I/O functions), hence the "__mem_" prefix.
*/
#if defined(CONFIG_SWAP_IO_SPACE)
# define ioswabb(x) (x)
-# define mem_ioswabb(x) (x)
+# define __mem_ioswabb(x) (x)
# ifdef CONFIG_SGI_IP22
/*
* IP22 seems braindead enough to swap 16bits values in hardware, but
* not 32bits. Go figure... Can't tell without documentation.
*/
# define ioswabw(x) (x)
-# define mem_ioswabw(x) le16_to_cpu(x)
+# define __mem_ioswabw(x) le16_to_cpu(x)
# else
# define ioswabw(x) le16_to_cpu(x)
-# define mem_ioswabw(x) (x)
+# define __mem_ioswabw(x) (x)
# endif
# define ioswabl(x) le32_to_cpu(x)
-# define mem_ioswabl(x) (x)
+# define __mem_ioswabl(x) (x)
# define ioswabq(x) le64_to_cpu(x)
-# define mem_ioswabq(x) (x)
+# define __mem_ioswabq(x) (x)
#else
# define ioswabb(x) (x)
-# define mem_ioswabb(x) (x)
+# define __mem_ioswabb(x) (x)
# define ioswabw(x) (x)
-# define mem_ioswabw(x) cpu_to_le16(x)
+# define __mem_ioswabw(x) cpu_to_le16(x)
# define ioswabl(x) (x)
-# define mem_ioswabl(x) cpu_to_le32(x)
+# define __mem_ioswabl(x) cpu_to_le32(x)
# define ioswabq(x) (x)
-# define mem_ioswabq(x) cpu_to_le32(x)
+# define __mem_ioswabq(x) cpu_to_le32(x)
#endif
@@ -343,7 +342,7 @@
BUG(); \
} \
\
-static inline type pfx##read##bwlq(volatile void __iomem *mem) \
+static inline type pfx##read##bwlq(const volatile void __iomem *mem) \
{ \
volatile type *__mem; \
type __val; \
@@ -418,7 +417,7 @@
\
__BUILD_MEMORY_PFX(__raw_, bwlq, type) \
__BUILD_MEMORY_PFX(, bwlq, type) \
-__BUILD_MEMORY_PFX(mem_, bwlq, type) \
+__BUILD_MEMORY_PFX(__mem_, bwlq, type) \
BUILDIO_MEM(b, u8)
BUILDIO_MEM(w, u16)
@@ -431,7 +430,7 @@
#define BUILDIO_IOPORT(bwlq, type) \
__BUILD_IOPORT_PFX(, bwlq, type) \
- __BUILD_IOPORT_PFX(mem_, bwlq, type)
+ __BUILD_IOPORT_PFX(__mem_, bwlq, type)
BUILDIO_IOPORT(b, u8)
BUILDIO_IOPORT(w, u16)
@@ -465,7 +464,7 @@
const volatile type *__addr = addr; \
\
while (count--) { \
- mem_write##bwlq(*__addr, mem); \
+ __mem_write##bwlq(*__addr, mem); \
__addr++; \
} \
} \
@@ -476,7 +475,7 @@
volatile type *__addr = addr; \
\
while (count--) { \
- *__addr = mem_read##bwlq(mem); \
+ *__addr = __mem_read##bwlq(mem); \
__addr++; \
} \
}
@@ -489,7 +488,7 @@
const volatile type *__addr = addr; \
\
while (count--) { \
- mem_out##bwlq(*__addr, port); \
+ __mem_out##bwlq(*__addr, port); \
__addr++; \
} \
} \
@@ -500,7 +499,7 @@
volatile type *__addr = addr; \
\
while (count--) { \
- *__addr = mem_in##bwlq(port); \
+ *__addr = __mem_in##bwlq(port); \
__addr++; \
} \
}
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index 8e1d7ed..4686e17 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -1198,7 +1198,11 @@
/* UARTS 0-3 */
#define UART_BASE UART0_ADDR
+#ifdef CONFIG_SOC_AU1200
+#define UART_DEBUG_BASE UART1_ADDR
+#else
#define UART_DEBUG_BASE UART3_ADDR
+#endif
#define UART_RX 0 /* Receive buffer */
#define UART_TX 4 /* Transmit buffer */
diff --git a/include/asm-mips/cobalt/cobalt.h b/include/asm-mips/mach-cobalt/cobalt.h
similarity index 100%
rename from include/asm-mips/cobalt/cobalt.h
rename to include/asm-mips/mach-cobalt/cobalt.h
diff --git a/include/asm-mips/mach-cobalt/cpu-feature-overrides.h b/include/asm-mips/mach-cobalt/cpu-feature-overrides.h
new file mode 100644
index 0000000..ace8c5e
--- /dev/null
+++ b/include/asm-mips/mach-cobalt/cpu-feature-overrides.h
@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_COBALT_CPU_FEATURE_OVERRIDES_H
+#define __ASM_COBALT_CPU_FEATURE_OVERRIDES_H
+
+#include <linux/config.h>
+
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_sb1_cache 0
+#define cpu_has_fpu 1
+#define cpu_has_32fpr 1
+#define cpu_has_counter 1
+#define cpu_has_watch 0
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 0
+#define cpu_has_mcheck 0
+#define cpu_has_ejtag 0
+
+#define cpu_has_subset_pcaches 0
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+#define cpu_scache_line_size() 0
+
+#ifdef CONFIG_64BIT
+#define cpu_has_llsc 0
+#else
+#define cpu_has_llsc 1
+#endif
+
+#define cpu_has_mips16 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+#define cpu_has_vtag_icache 0
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_icache_snoops_remote_store 0
+#define cpu_has_dsp 0
+
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#endif /* __ASM_COBALT_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/cobalt/mach-gt64120.h b/include/asm-mips/mach-cobalt/mach-gt64120.h
similarity index 100%
rename from include/asm-mips/cobalt/mach-gt64120.h
rename to include/asm-mips/mach-cobalt/mach-gt64120.h
diff --git a/include/asm-mips/mach-ip32/cpu-feature-overrides.h b/include/asm-mips/mach-ip32/cpu-feature-overrides.h
index b80c307..36070b5 100644
--- a/include/asm-mips/mach-ip32/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-ip32/cpu-feature-overrides.h
@@ -18,7 +18,7 @@
* so, for 64bit IP32 kernel we just don't use ll/sc.
* This does not affect luserland.
*/
-#if defined(CONFIG_CPU_R5000) && defined(CONFIG_64BIT)
+#if (defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_NEVADA)) && defined(CONFIG_64BIT)
#define cpu_has_llsc 0
#else
#define cpu_has_llsc 1
diff --git a/include/asm-mips/r4kcache.h b/include/asm-mips/r4kcache.h
index a5ea9d8..cc53196 100644
--- a/include/asm-mips/r4kcache.h
+++ b/include/asm-mips/r4kcache.h
@@ -166,123 +166,6 @@
: "r" (base), \
"i" (op));
-static inline void blast_dcache16(void)
-{
- unsigned long start = INDEX_BASE;
- unsigned long end = start + current_cpu_data.dcache.waysize;
- unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
- unsigned long ws_end = current_cpu_data.dcache.ways <<
- current_cpu_data.dcache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x200)
- cache16_unroll32(addr|ws,Index_Writeback_Inv_D);
-}
-
-static inline void blast_dcache16_page(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
-
- do {
- cache16_unroll32(start,Hit_Writeback_Inv_D);
- start += 0x200;
- } while (start < end);
-}
-
-static inline void blast_dcache16_page_indexed(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
- unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
- unsigned long ws_end = current_cpu_data.dcache.ways <<
- current_cpu_data.dcache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x200)
- cache16_unroll32(addr|ws,Index_Writeback_Inv_D);
-}
-
-static inline void blast_icache16(void)
-{
- unsigned long start = INDEX_BASE;
- unsigned long end = start + current_cpu_data.icache.waysize;
- unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
- unsigned long ws_end = current_cpu_data.icache.ways <<
- current_cpu_data.icache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x200)
- cache16_unroll32(addr|ws,Index_Invalidate_I);
-}
-
-static inline void blast_icache16_page(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
-
- do {
- cache16_unroll32(start,Hit_Invalidate_I);
- start += 0x200;
- } while (start < end);
-}
-
-static inline void blast_icache16_page_indexed(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
- unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
- unsigned long ws_end = current_cpu_data.icache.ways <<
- current_cpu_data.icache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x200)
- cache16_unroll32(addr|ws,Index_Invalidate_I);
-}
-
-static inline void blast_scache16(void)
-{
- unsigned long start = INDEX_BASE;
- unsigned long end = start + current_cpu_data.scache.waysize;
- unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
- unsigned long ws_end = current_cpu_data.scache.ways <<
- current_cpu_data.scache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x200)
- cache16_unroll32(addr|ws,Index_Writeback_Inv_SD);
-}
-
-static inline void blast_scache16_page(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = page + PAGE_SIZE;
-
- do {
- cache16_unroll32(start,Hit_Writeback_Inv_SD);
- start += 0x200;
- } while (start < end);
-}
-
-static inline void blast_scache16_page_indexed(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
- unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
- unsigned long ws_end = current_cpu_data.scache.ways <<
- current_cpu_data.scache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x200)
- cache16_unroll32(addr|ws,Index_Writeback_Inv_SD);
-}
-
#define cache32_unroll32(base,op) \
__asm__ __volatile__( \
" .set push \n" \
@@ -309,123 +192,6 @@
: "r" (base), \
"i" (op));
-static inline void blast_dcache32(void)
-{
- unsigned long start = INDEX_BASE;
- unsigned long end = start + current_cpu_data.dcache.waysize;
- unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
- unsigned long ws_end = current_cpu_data.dcache.ways <<
- current_cpu_data.dcache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x400)
- cache32_unroll32(addr|ws,Index_Writeback_Inv_D);
-}
-
-static inline void blast_dcache32_page(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
-
- do {
- cache32_unroll32(start,Hit_Writeback_Inv_D);
- start += 0x400;
- } while (start < end);
-}
-
-static inline void blast_dcache32_page_indexed(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
- unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
- unsigned long ws_end = current_cpu_data.dcache.ways <<
- current_cpu_data.dcache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x400)
- cache32_unroll32(addr|ws,Index_Writeback_Inv_D);
-}
-
-static inline void blast_icache32(void)
-{
- unsigned long start = INDEX_BASE;
- unsigned long end = start + current_cpu_data.icache.waysize;
- unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
- unsigned long ws_end = current_cpu_data.icache.ways <<
- current_cpu_data.icache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x400)
- cache32_unroll32(addr|ws,Index_Invalidate_I);
-}
-
-static inline void blast_icache32_page(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
-
- do {
- cache32_unroll32(start,Hit_Invalidate_I);
- start += 0x400;
- } while (start < end);
-}
-
-static inline void blast_icache32_page_indexed(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
- unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
- unsigned long ws_end = current_cpu_data.icache.ways <<
- current_cpu_data.icache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x400)
- cache32_unroll32(addr|ws,Index_Invalidate_I);
-}
-
-static inline void blast_scache32(void)
-{
- unsigned long start = INDEX_BASE;
- unsigned long end = start + current_cpu_data.scache.waysize;
- unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
- unsigned long ws_end = current_cpu_data.scache.ways <<
- current_cpu_data.scache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x400)
- cache32_unroll32(addr|ws,Index_Writeback_Inv_SD);
-}
-
-static inline void blast_scache32_page(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = page + PAGE_SIZE;
-
- do {
- cache32_unroll32(start,Hit_Writeback_Inv_SD);
- start += 0x400;
- } while (start < end);
-}
-
-static inline void blast_scache32_page_indexed(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
- unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
- unsigned long ws_end = current_cpu_data.scache.ways <<
- current_cpu_data.scache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x400)
- cache32_unroll32(addr|ws,Index_Writeback_Inv_SD);
-}
-
#define cache64_unroll32(base,op) \
__asm__ __volatile__( \
" .set push \n" \
@@ -452,84 +218,6 @@
: "r" (base), \
"i" (op));
-static inline void blast_icache64(void)
-{
- unsigned long start = INDEX_BASE;
- unsigned long end = start + current_cpu_data.icache.waysize;
- unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
- unsigned long ws_end = current_cpu_data.icache.ways <<
- current_cpu_data.icache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x800)
- cache64_unroll32(addr|ws,Index_Invalidate_I);
-}
-
-static inline void blast_icache64_page(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
-
- do {
- cache64_unroll32(start,Hit_Invalidate_I);
- start += 0x800;
- } while (start < end);
-}
-
-static inline void blast_icache64_page_indexed(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
- unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
- unsigned long ws_end = current_cpu_data.icache.ways <<
- current_cpu_data.icache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x800)
- cache64_unroll32(addr|ws,Index_Invalidate_I);
-}
-
-static inline void blast_scache64(void)
-{
- unsigned long start = INDEX_BASE;
- unsigned long end = start + current_cpu_data.scache.waysize;
- unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
- unsigned long ws_end = current_cpu_data.scache.ways <<
- current_cpu_data.scache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x800)
- cache64_unroll32(addr|ws,Index_Writeback_Inv_SD);
-}
-
-static inline void blast_scache64_page(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = page + PAGE_SIZE;
-
- do {
- cache64_unroll32(start,Hit_Writeback_Inv_SD);
- start += 0x800;
- } while (start < end);
-}
-
-static inline void blast_scache64_page_indexed(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
- unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
- unsigned long ws_end = current_cpu_data.scache.ways <<
- current_cpu_data.scache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x800)
- cache64_unroll32(addr|ws,Index_Writeback_Inv_SD);
-}
-
#define cache128_unroll32(base,op) \
__asm__ __volatile__( \
" .set push \n" \
@@ -556,43 +244,55 @@
: "r" (base), \
"i" (op));
-static inline void blast_scache128(void)
-{
- unsigned long start = INDEX_BASE;
- unsigned long end = start + current_cpu_data.scache.waysize;
- unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
- unsigned long ws_end = current_cpu_data.scache.ways <<
- current_cpu_data.scache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x1000)
- cache128_unroll32(addr|ws,Index_Writeback_Inv_SD);
+/* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
+static inline void blast_##pfx##cache##lsize(void) \
+{ \
+ unsigned long start = INDEX_BASE; \
+ unsigned long end = start + current_cpu_data.desc.waysize; \
+ unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit; \
+ unsigned long ws_end = current_cpu_data.desc.ways << \
+ current_cpu_data.desc.waybit; \
+ unsigned long ws, addr; \
+ \
+ for (ws = 0; ws < ws_end; ws += ws_inc) \
+ for (addr = start; addr < end; addr += lsize * 32) \
+ cache##lsize##_unroll32(addr|ws,indexop); \
+} \
+ \
+static inline void blast_##pfx##cache##lsize##_page(unsigned long page) \
+{ \
+ unsigned long start = page; \
+ unsigned long end = page + PAGE_SIZE; \
+ \
+ do { \
+ cache##lsize##_unroll32(start,hitop); \
+ start += lsize * 32; \
+ } while (start < end); \
+} \
+ \
+static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) \
+{ \
+ unsigned long start = page; \
+ unsigned long end = start + PAGE_SIZE; \
+ unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit; \
+ unsigned long ws_end = current_cpu_data.desc.ways << \
+ current_cpu_data.desc.waybit; \
+ unsigned long ws, addr; \
+ \
+ for (ws = 0; ws < ws_end; ws += ws_inc) \
+ for (addr = start; addr < end; addr += lsize * 32) \
+ cache##lsize##_unroll32(addr|ws,indexop); \
}
-static inline void blast_scache128_page(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = page + PAGE_SIZE;
-
- do {
- cache128_unroll32(start,Hit_Writeback_Inv_SD);
- start += 0x1000;
- } while (start < end);
-}
-
-static inline void blast_scache128_page_indexed(unsigned long page)
-{
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
- unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
- unsigned long ws_end = current_cpu_data.scache.ways <<
- current_cpu_data.scache.waybit;
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x1000)
- cache128_unroll32(addr|ws,Index_Writeback_Inv_SD);
-}
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
#endif /* _ASM_R4KCACHE_H */
diff --git a/include/asm-mips/reboot.h b/include/asm-mips/reboot.h
index 2f10ebc..e48c0bf 100644
--- a/include/asm-mips/reboot.h
+++ b/include/asm-mips/reboot.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1997, 1999, 2001 by Ralf Baechle
+ * Copyright (C) 1997, 1999, 2001, 06 by Ralf Baechle
* Copyright (C) 2001 MIPS Technologies, Inc.
*/
#ifndef _ASM_REBOOT_H
@@ -11,6 +11,5 @@
extern void (*_machine_restart)(char *command);
extern void (*_machine_halt)(void);
-extern void (*_machine_power_off)(void);
#endif /* _ASM_REBOOT_H */
diff --git a/include/asm-mips/string.h b/include/asm-mips/string.h
index 5a06f6d..907da60 100644
--- a/include/asm-mips/string.h
+++ b/include/asm-mips/string.h
@@ -141,26 +141,4 @@
#define __HAVE_ARCH_MEMMOVE
extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
-#ifdef CONFIG_32BIT
-#define __HAVE_ARCH_MEMSCAN
-static __inline__ void *memscan(void *__addr, int __c, size_t __size)
-{
- char *__end = (char *)__addr + __size;
- unsigned char __uc = (unsigned char) __c;
-
- __asm__(".set\tpush\n\t"
- ".set\tnoat\n\t"
- ".set\treorder\n\t"
- "1:\tbeq\t%0,%1,2f\n\t"
- "addiu\t%0,1\n\t"
- "lbu\t$1,-1(%0)\n\t"
- "bne\t$1,%z4,1b\n"
- "2:\t.set\tpop"
- : "=r" (__addr), "=r" (__end)
- : "0" (__addr), "1" (__end), "Jr" (__uc));
-
- return __addr;
-}
-#endif /* CONFIG_32BIT */
-
#endif /* _ASM_STRING_H */
diff --git a/include/asm-mips/thread_info.h b/include/asm-mips/thread_info.h
index 1612b3f..fa193f8 100644
--- a/include/asm-mips/thread_info.h
+++ b/include/asm-mips/thread_info.h
@@ -114,6 +114,7 @@
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
#define TIF_SYSCALL_AUDIT 4 /* syscall auditing active */
#define TIF_SECCOMP 5 /* secure computing */
+#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 18
@@ -125,6 +126,7 @@
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
+#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
diff --git a/include/asm-mips/tx4927/tx4927.h b/include/asm-mips/tx4927/tx4927.h
index 3bb7f00..de85bd2 100644
--- a/include/asm-mips/tx4927/tx4927.h
+++ b/include/asm-mips/tx4927/tx4927.h
@@ -2,7 +2,7 @@
* Author: MontaVista Software, Inc.
* source@mvista.com
*
- * Copyright 2001-2002 MontaVista Software Inc.
+ * Copyright 2001-2006 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -30,10 +30,10 @@
#include <asm/tx4927/tx4927_mips.h>
/*
- This register naming came from the intergrate cpu/controoler name TX4927
+ This register naming came from the integrated CPU/controller name TX4927
followed by the device name from table 4.2.2 on page 4-3 and then followed
by the register name from table 4.2.3 on pages 4-4 to 4-8. The manaul
- used is "TMPR4927BT Preliminary Rev 0.1 20.Jul.2001".
+ used was "TMPR4927BT Preliminary Rev 0.1 20.Jul.2001".
*/
#define TX4927_SIO_0_BASE
@@ -251,8 +251,8 @@
/* TX4927 Timer 0 (32-bit registers) */
#define TX4927_TMR0_BASE 0xf000
-#define TX4927_TMR0_TMTCR0 0xf004
-#define TX4927_TMR0_TMTISR0 0xf008
+#define TX4927_TMR0_TMTCR0 0xf000
+#define TX4927_TMR0_TMTISR0 0xf004
#define TX4927_TMR0_TMCPRA0 0xf008
#define TX4927_TMR0_TMCPRB0 0xf00c
#define TX4927_TMR0_TMITMR0 0xf010
@@ -264,8 +264,8 @@
/* TX4927 Timer 1 (32-bit registers) */
#define TX4927_TMR1_BASE 0xf100
-#define TX4927_TMR1_TMTCR1 0xf104
-#define TX4927_TMR1_TMTISR1 0xf108
+#define TX4927_TMR1_TMTCR1 0xf100
+#define TX4927_TMR1_TMTISR1 0xf104
#define TX4927_TMR1_TMCPRA1 0xf108
#define TX4927_TMR1_TMCPRB1 0xf10c
#define TX4927_TMR1_TMITMR1 0xf110
@@ -277,13 +277,12 @@
/* TX4927 Timer 2 (32-bit registers) */
#define TX4927_TMR2_BASE 0xf200
-#define TX4927_TMR2_TMTCR2 0xf104
-#define TX4927_TMR2_TMTISR2 0xf208
+#define TX4927_TMR2_TMTCR2 0xf200
+#define TX4927_TMR2_TMTISR2 0xf204
#define TX4927_TMR2_TMCPRA2 0xf208
-#define TX4927_TMR2_TMCPRB2 0xf20c
#define TX4927_TMR2_TMITMR2 0xf210
#define TX4927_TMR2_TMCCDR2 0xf220
-#define TX4927_TMR2_TMPGMR2 0xf230
+#define TX4927_TMR2_TMWTMR2 0xf240
#define TX4927_TMR2_TMTRR2 0xf2f0
#define TX4927_TMR2_LIMIT 0xf2ff
diff --git a/include/asm-mips/tx4927/tx4927_pci.h b/include/asm-mips/tx4927/tx4927_pci.h
index 165f6b8..66c0646 100644
--- a/include/asm-mips/tx4927/tx4927_pci.h
+++ b/include/asm-mips/tx4927/tx4927_pci.h
@@ -253,6 +253,16 @@
#define TX4927_CCFG_PCIDIVMODE_5 0x00001000
#define TX4927_CCFG_PCIDIVMODE_6 0x00001800
+#define TX4937_CCFG_PCIDIVMODE_MASK 0x00001c00
+#define TX4937_CCFG_PCIDIVMODE_8 0x00000000
+#define TX4937_CCFG_PCIDIVMODE_4 0x00000400
+#define TX4937_CCFG_PCIDIVMODE_9 0x00000800
+#define TX4937_CCFG_PCIDIVMODE_4_5 0x00000c00
+#define TX4937_CCFG_PCIDIVMODE_10 0x00001000
+#define TX4937_CCFG_PCIDIVMODE_5 0x00001400
+#define TX4937_CCFG_PCIDIVMODE_11 0x00001800
+#define TX4937_CCFG_PCIDIVMODE_5_5 0x00001c00
+
/* PCFG : Pin Configuration */
#define TX4927_PCFG_PCICLKEN_ALL 0x003f0000
#define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch))
diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h
index 41bb96b..91d813a 100644
--- a/include/asm-mips/uaccess.h
+++ b/include/asm-mips/uaccess.h
@@ -202,49 +202,49 @@
* Yuck. We need two variants, one for 64bit operation and one
* for 32 bit mode and old iron.
*/
-#ifdef __mips64
-#define __GET_USER_DW(ptr) __get_user_asm("ld", ptr)
-#else
-#define __GET_USER_DW(ptr) __get_user_asm_ll32(ptr)
+#ifdef CONFIG_32BIT
+#define __GET_USER_DW(val, ptr) __get_user_asm_ll32(val, ptr)
#endif
+#ifdef CONFIG_64BIT
+#define __GET_USER_DW(val, ptr) __get_user_asm(val, "ld", ptr)
+#endif
+
+extern void __get_user_unknown(void);
+
+#define __get_user_common(val, size, ptr) \
+do { \
+ switch (size) { \
+ case 1: __get_user_asm(val, "lb", ptr); break; \
+ case 2: __get_user_asm(val, "lh", ptr); break; \
+ case 4: __get_user_asm(val, "lw", ptr); break; \
+ case 8: __GET_USER_DW(val, ptr); break; \
+ default: __get_user_unknown(); break; \
+ } \
+} while (0)
#define __get_user_nocheck(x,ptr,size) \
({ \
- __typeof(*(ptr)) __gu_val = (__typeof(*(ptr))) 0; \
- long __gu_err = 0; \
+ long __gu_err; \
\
- switch (size) { \
- case 1: __get_user_asm("lb", ptr); break; \
- case 2: __get_user_asm("lh", ptr); break; \
- case 4: __get_user_asm("lw", ptr); break; \
- case 8: __GET_USER_DW(ptr); break; \
- default: __get_user_unknown(); break; \
- } \
- (x) = (__typeof__(*(ptr))) __gu_val; \
+ __get_user_common((x), size, ptr); \
__gu_err; \
})
#define __get_user_check(x,ptr,size) \
({ \
- const __typeof__(*(ptr)) __user * __gu_addr = (ptr); \
- __typeof__(*(ptr)) __gu_val = 0; \
long __gu_err = -EFAULT; \
+ const void __user * __gu_ptr = (ptr); \
\
- if (likely(access_ok(VERIFY_READ, __gu_addr, size))) { \
- switch (size) { \
- case 1: __get_user_asm("lb", __gu_addr); break; \
- case 2: __get_user_asm("lh", __gu_addr); break; \
- case 4: __get_user_asm("lw", __gu_addr); break; \
- case 8: __GET_USER_DW(__gu_addr); break; \
- default: __get_user_unknown(); break; \
- } \
- } \
- (x) = (__typeof__(*(ptr))) __gu_val; \
+ if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \
+ __get_user_common((x), size, __gu_ptr); \
+ \
__gu_err; \
})
-#define __get_user_asm(insn, addr) \
+#define __get_user_asm(val, insn, addr) \
{ \
+ long __gu_tmp; \
+ \
__asm__ __volatile__( \
"1: " insn " %1, %3 \n" \
"2: \n" \
@@ -255,14 +255,16 @@
" .section __ex_table,\"a\" \n" \
" "__UA_ADDR "\t1b, 3b \n" \
" .previous \n" \
- : "=r" (__gu_err), "=r" (__gu_val) \
+ : "=r" (__gu_err), "=r" (__gu_tmp) \
: "0" (0), "o" (__m(addr)), "i" (-EFAULT)); \
+ \
+ (val) = (__typeof__(val)) __gu_tmp; \
}
/*
* Get a long long 64 using 32 bit registers.
*/
-#define __get_user_asm_ll32(addr) \
+#define __get_user_asm_ll32(val, addr) \
{ \
__asm__ __volatile__( \
"1: lw %1, (%3) \n" \
@@ -278,21 +280,20 @@
" " __UA_ADDR " 1b, 4b \n" \
" " __UA_ADDR " 2b, 4b \n" \
" .previous \n" \
- : "=r" (__gu_err), "=&r" (__gu_val) \
+ : "=r" (__gu_err), "=&r" (val) \
: "0" (0), "r" (addr), "i" (-EFAULT)); \
}
-extern void __get_user_unknown(void);
-
/*
* Yuck. We need two variants, one for 64bit operation and one
* for 32 bit mode and old iron.
*/
-#ifdef __mips64
-#define __PUT_USER_DW(ptr) __put_user_asm("sd", ptr)
-#else
+#ifdef CONFIG_32BIT
#define __PUT_USER_DW(ptr) __put_user_asm_ll32(ptr)
#endif
+#ifdef CONFIG_64BIT
+#define __PUT_USER_DW(ptr) __put_user_asm("sd", ptr)
+#endif
#define __put_user_nocheck(x,ptr,size) \
({ \
diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h
index 89ea8b6..e7ff9b1 100644
--- a/include/asm-mips/unistd.h
+++ b/include/asm-mips/unistd.h
@@ -307,17 +307,33 @@
#define __NR_inotify_init (__NR_Linux + 284)
#define __NR_inotify_add_watch (__NR_Linux + 285)
#define __NR_inotify_rm_watch (__NR_Linux + 286)
-
+#define __NR_migrate_pages (__NR_Linux + 287)
+#define __NR_openat (__NR_Linux + 288)
+#define __NR_mkdirat (__NR_Linux + 289)
+#define __NR_mknodat (__NR_Linux + 290)
+#define __NR_fchownat (__NR_Linux + 291)
+#define __NR_futimesat (__NR_Linux + 292)
+#define __NR_newfstatat (__NR_Linux + 293)
+#define __NR_unlinkat (__NR_Linux + 294)
+#define __NR_renameat (__NR_Linux + 295)
+#define __NR_linkat (__NR_Linux + 296)
+#define __NR_symlinkat (__NR_Linux + 297)
+#define __NR_readlinkat (__NR_Linux + 298)
+#define __NR_fchmodat (__NR_Linux + 299)
+#define __NR_faccessat (__NR_Linux + 300)
+#define __NR_pselect6 (__NR_Linux + 301)
+#define __NR_ppoll (__NR_Linux + 302)
+#define __NR_unshare (__NR_Linux + 303)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 286
+#define __NR_Linux_syscalls 303
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 283
+#define __NR_O32_Linux_syscalls 303
#if _MIPS_SIM == _MIPS_SIM_ABI64
@@ -571,16 +587,33 @@
#define __NR_inotify_init (__NR_Linux + 243)
#define __NR_inotify_add_watch (__NR_Linux + 244)
#define __NR_inotify_rm_watch (__NR_Linux + 245)
+#define __NR_migrate_pages (__NR_Linux + 246)
+#define __NR_openat (__NR_Linux + 247)
+#define __NR_mkdirat (__NR_Linux + 248)
+#define __NR_mknodat (__NR_Linux + 249)
+#define __NR_fchownat (__NR_Linux + 250)
+#define __NR_futimesat (__NR_Linux + 251)
+#define __NR_newfstatat (__NR_Linux + 252)
+#define __NR_unlinkat (__NR_Linux + 253)
+#define __NR_renameat (__NR_Linux + 254)
+#define __NR_linkat (__NR_Linux + 255)
+#define __NR_symlinkat (__NR_Linux + 256)
+#define __NR_readlinkat (__NR_Linux + 257)
+#define __NR_fchmodat (__NR_Linux + 258)
+#define __NR_faccessat (__NR_Linux + 259)
+#define __NR_pselect6 (__NR_Linux + 260)
+#define __NR_ppoll (__NR_Linux + 261)
+#define __NR_unshare (__NR_Linux + 262)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 245
+#define __NR_Linux_syscalls 262
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 242
+#define __NR_64_Linux_syscalls 262
#if _MIPS_SIM == _MIPS_SIM_NABI32
@@ -838,16 +871,33 @@
#define __NR_inotify_init (__NR_Linux + 247)
#define __NR_inotify_add_watch (__NR_Linux + 248)
#define __NR_inotify_rm_watch (__NR_Linux + 249)
+#define __NR_migrate_pages (__NR_Linux + 250)
+#define __NR_openat (__NR_Linux + 251)
+#define __NR_mkdirat (__NR_Linux + 252)
+#define __NR_mknodat (__NR_Linux + 253)
+#define __NR_fchownat (__NR_Linux + 254)
+#define __NR_futimesat (__NR_Linux + 255)
+#define __NR_newfstatat (__NR_Linux + 256)
+#define __NR_unlinkat (__NR_Linux + 257)
+#define __NR_renameat (__NR_Linux + 258)
+#define __NR_linkat (__NR_Linux + 259)
+#define __NR_symlinkat (__NR_Linux + 260)
+#define __NR_readlinkat (__NR_Linux + 261)
+#define __NR_fchmodat (__NR_Linux + 262)
+#define __NR_faccessat (__NR_Linux + 263)
+#define __NR_pselect6 (__NR_Linux + 264)
+#define __NR_ppoll (__NR_Linux + 265)
+#define __NR_unshare (__NR_Linux + 266)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 249
+#define __NR_Linux_syscalls 266
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 246
+#define __NR_N32_Linux_syscalls 266
#ifndef __ASSEMBLY__
diff --git a/include/asm-parisc/atomic.h b/include/asm-parisc/atomic.h
index 2ca56d3..4dc7253 100644
--- a/include/asm-parisc/atomic.h
+++ b/include/asm-parisc/atomic.h
@@ -1,9 +1,13 @@
+/* Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2006 Kyle McMartin <kyle@parisc-linux.org>
+ */
+
#ifndef _ASM_PARISC_ATOMIC_H_
#define _ASM_PARISC_ATOMIC_H_
#include <linux/config.h>
+#include <linux/types.h>
#include <asm/system.h>
-/* Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>. */
/*
* Atomic operations that C can't guarantee us. Useful for
@@ -46,15 +50,6 @@
# define _atomic_spin_unlock_irqrestore(l,f) do { local_irq_restore(f); } while (0)
#endif
-/* Note that we need not lock read accesses - aligned word writes/reads
- * are atomic, so a reader never sees unconsistent values.
- *
- * Cache-line alignment would conflict with, for example, linux/module.h
- */
-
-typedef struct { volatile int counter; } atomic_t;
-
-
/* This should get optimized out since it's never called.
** Or get a link error if xchg is used "wrong".
*/
@@ -69,10 +64,9 @@
#endif
/* optimizer better get rid of switch since size is a constant */
-static __inline__ unsigned long __xchg(unsigned long x, __volatile__ void * ptr,
- int size)
+static __inline__ unsigned long
+__xchg(unsigned long x, __volatile__ void * ptr, int size)
{
-
switch(size) {
#ifdef __LP64__
case 8: return __xchg64(x,(unsigned long *) ptr);
@@ -129,7 +123,13 @@
(unsigned long)_n_, sizeof(*(ptr))); \
})
+/* Note that we need not lock read accesses - aligned word writes/reads
+ * are atomic, so a reader never sees unconsistent values.
+ *
+ * Cache-line alignment would conflict with, for example, linux/module.h
+ */
+typedef struct { volatile int counter; } atomic_t;
/* It's possible to reduce all atomic operations to either
* __atomic_add_return, atomic_set and atomic_read (the latter
@@ -210,12 +210,66 @@
#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
-#define ATOMIC_INIT(i) { (i) }
+#define ATOMIC_INIT(i) ((atomic_t) { (i) })
#define smp_mb__before_atomic_dec() smp_mb()
#define smp_mb__after_atomic_dec() smp_mb()
#define smp_mb__before_atomic_inc() smp_mb()
#define smp_mb__after_atomic_inc() smp_mb()
+#ifdef __LP64__
+
+typedef struct { volatile s64 counter; } atomic64_t;
+
+#define ATOMIC64_INIT(i) ((atomic64_t) { (i) })
+
+static __inline__ int
+__atomic64_add_return(s64 i, atomic64_t *v)
+{
+ int ret;
+ unsigned long flags;
+ _atomic_spin_lock_irqsave(v, flags);
+
+ ret = (v->counter += i);
+
+ _atomic_spin_unlock_irqrestore(v, flags);
+ return ret;
+}
+
+static __inline__ void
+atomic64_set(atomic64_t *v, s64 i)
+{
+ unsigned long flags;
+ _atomic_spin_lock_irqsave(v, flags);
+
+ v->counter = i;
+
+ _atomic_spin_unlock_irqrestore(v, flags);
+}
+
+static __inline__ s64
+atomic64_read(const atomic64_t *v)
+{
+ return v->counter;
+}
+
+#define atomic64_add(i,v) ((void)(__atomic64_add_return( ((s64)i),(v))))
+#define atomic64_sub(i,v) ((void)(__atomic64_add_return(-((s64)i),(v))))
+#define atomic64_inc(v) ((void)(__atomic64_add_return( 1,(v))))
+#define atomic64_dec(v) ((void)(__atomic64_add_return( -1,(v))))
+
+#define atomic64_add_return(i,v) (__atomic64_add_return( ((s64)i),(v)))
+#define atomic64_sub_return(i,v) (__atomic64_add_return(-((s64)i),(v)))
+#define atomic64_inc_return(v) (__atomic64_add_return( 1,(v)))
+#define atomic64_dec_return(v) (__atomic64_add_return( -1,(v)))
+
+#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0)
+
+#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
+#define atomic64_dec_and_test(v) (atomic64_dec_return(v) == 0)
+
+#endif /* __LP64__ */
+
#include <asm-generic/atomic.h>
-#endif
+
+#endif /* _ASM_PARISC_ATOMIC_H_ */
diff --git a/include/asm-parisc/cacheflush.h b/include/asm-parisc/cacheflush.h
index 1bc3c83..c53af9f 100644
--- a/include/asm-parisc/cacheflush.h
+++ b/include/asm-parisc/cacheflush.h
@@ -183,4 +183,10 @@
__flush_cache_page(vma, vmaddr);
}
+
+#ifdef CONFIG_DEBUG_RODATA
+void mark_rodata_ro(void);
#endif
+
+#endif /* _PARISC_CACHEFLUSH_H */
+
diff --git a/include/asm-parisc/compat_ucontext.h b/include/asm-parisc/compat_ucontext.h
index a1228a3..2f7292a 100644
--- a/include/asm-parisc/compat_ucontext.h
+++ b/include/asm-parisc/compat_ucontext.h
@@ -1,8 +1,7 @@
#ifndef _ASM_PARISC_COMPAT_UCONTEXT_H
#define _ASM_PARISC_COMPAT_UCONTEXT_H
-#include<linux/compat.h>
-#include<asm/compat_signal.h>
+#include <linux/compat.h>
/* 32-bit ucontext as seen from an 64-bit kernel */
struct compat_ucontext {
diff --git a/include/asm-parisc/grfioctl.h b/include/asm-parisc/grfioctl.h
index 6a91031..671e060 100644
--- a/include/asm-parisc/grfioctl.h
+++ b/include/asm-parisc/grfioctl.h
@@ -58,7 +58,7 @@
#define CRT_ID_ELK_1024DB 0x27849CA5 /* Elk 1024x768 double buffer */
#define CRT_ID_ELK_GS S9000_ID_A1924A /* Elk 1280x1024 GreyScale */
#define CRT_ID_CRX24 S9000_ID_A1439A /* Piranha */
-#define CRT_ID_VISUALIZE_EG 0x2D08C0A7 /* Graffiti (built-in B132+/B160L) */
+#define CRT_ID_VISUALIZE_EG 0x2D08C0A7 /* Graffiti, A4450A (built-in B132+/B160L) */
#define CRT_ID_THUNDER 0x2F23E5FC /* Thunder 1 VISUALIZE 48*/
#define CRT_ID_THUNDER2 0x2F8D570E /* Thunder 2 VISUALIZE 48 XP*/
#define CRT_ID_HCRX S9000_ID_HCRX /* Hyperdrive HCRX */
diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h
index f277254..fe7f6a2 100644
--- a/include/asm-parisc/pci.h
+++ b/include/asm-parisc/pci.h
@@ -18,6 +18,18 @@
*/
#define PCI_MAX_BUSSES 256
+
+/* To be used as: mdelay(pci_post_reset_delay);
+ *
+ * post_reset is the time the kernel should stall to prevent anyone from
+ * accessing the PCI bus once #RESET is de-asserted.
+ * PCI spec somewhere says 1 second but with multi-PCI bus systems,
+ * this makes the boot time much longer than necessary.
+ * 20ms seems to work for all the HP PCI implementations to date.
+ */
+#define pci_post_reset_delay 50
+
+
/*
** pci_hba_data (aka H2P_OBJECT in HP/UX)
**
@@ -83,7 +95,7 @@
/*
** Convert between PCI (IO_VIEW) addresses and processor (PA_VIEW) addresses.
-** See pcibios.c for more conversions used by Generic PCI code.
+** See pci.c for more conversions used by Generic PCI code.
**
** Platform characteristics/firmware guarantee that
** (1) PA_VIEW - IO_VIEW = lmmio_offset for both LMMIO and ELMMIO
@@ -191,9 +203,6 @@
*/
extern struct pci_port_ops *pci_port;
extern struct pci_bios_ops *pci_bios;
-extern int pci_post_reset_delay; /* delay after de-asserting #RESET */
-extern int pci_hba_count;
-extern struct pci_hba_data *parisc_pci_hba[];
#ifdef CONFIG_PCI
extern void pcibios_register_hba(struct pci_hba_data *);
diff --git a/include/asm-parisc/pgalloc.h b/include/asm-parisc/pgalloc.h
index 6291d66..3122fad 100644
--- a/include/asm-parisc/pgalloc.h
+++ b/include/asm-parisc/pgalloc.h
@@ -137,7 +137,6 @@
#define pte_free(page) pte_free_kernel(page_address(page))
-extern int do_check_pgt_cache(int, int);
#define check_pgt_cache() do { } while (0)
#endif
diff --git a/include/asm-parisc/pgtable.h b/include/asm-parisc/pgtable.h
index b455471..4e34c6b 100644
--- a/include/asm-parisc/pgtable.h
+++ b/include/asm-parisc/pgtable.h
@@ -213,7 +213,7 @@
#define PAGE_COPY PAGE_EXECREAD
#define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | _PAGE_WRITE | _PAGE_EXEC |_PAGE_ACCESSED)
#define PAGE_KERNEL __pgprot(_PAGE_KERNEL)
-#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_DIRTY | _PAGE_ACCESSED)
+#define PAGE_KERNEL_RO __pgprot(_PAGE_KERNEL & ~_PAGE_WRITE)
#define PAGE_KERNEL_UNC __pgprot(_PAGE_KERNEL | _PAGE_NO_CACHE)
#define PAGE_GATEWAY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_GATEWAY| _PAGE_READ)
#define PAGE_FLUSH __pgprot(_PAGE_FLUSH)
diff --git a/include/asm-parisc/rt_sigframe.h b/include/asm-parisc/rt_sigframe.h
index 5623c03..f0dd3b3 100644
--- a/include/asm-parisc/rt_sigframe.h
+++ b/include/asm-parisc/rt_sigframe.h
@@ -1,10 +1,6 @@
#ifndef _ASM_PARISC_RT_SIGFRAME_H
#define _ASM_PARISC_RT_SIGFRAME_H
-#ifdef CONFIG_COMPAT
-#include <asm/compat_rt_sigframe.h>
-#endif
-
#define SIGRETURN_TRAMP 4
#define SIGRESTARTBLOCK_TRAMP 5
#define TRAMP_SIZE (SIGRETURN_TRAMP + SIGRESTARTBLOCK_TRAMP)
diff --git a/include/asm-parisc/unistd.h b/include/asm-parisc/unistd.h
index 80b7b98..c56fccb 100644
--- a/include/asm-parisc/unistd.h
+++ b/include/asm-parisc/unistd.h
@@ -761,8 +761,27 @@
#define __NR_keyctl (__NR_Linux + 266)
#define __NR_ioprio_set (__NR_Linux + 267)
#define __NR_ioprio_get (__NR_Linux + 268)
+#define __NR_inotify_init (__NR_Linux + 269)
+#define __NR_inotify_add_watch (__NR_Linux + 270)
+#define __NR_inotify_rm_watch (__NR_Linux + 271)
+#define __NR_migrate_pages (__NR_Linux + 272)
+#define __NR_pselect6 (__NR_Linux + 273)
+#define __NR_ppoll (__NR_Linux + 274)
+#define __NR_openat (__NR_Linux + 275)
+#define __NR_mkdirat (__NR_Linux + 276)
+#define __NR_mknodat (__NR_Linux + 277)
+#define __NR_fchownat (__NR_Linux + 278)
+#define __NR_futimesat (__NR_Linux + 279)
+#define __NR_newfstatat (__NR_Linux + 280)
+#define __NR_unlinkat (__NR_Linux + 281)
+#define __NR_renameat (__NR_Linux + 282)
+#define __NR_linkat (__NR_Linux + 283)
+#define __NR_symlinkat (__NR_Linux + 284)
+#define __NR_readlinkat (__NR_Linux + 285)
+#define __NR_fchmodat (__NR_Linux + 286)
+#define __NR_faccessat (__NR_Linux + 287)
-#define __NR_Linux_syscalls 269
+#define __NR_Linux_syscalls 288
#define HPUX_GATEWAY_ADDR 0xC0000004
#define LINUX_GATEWAY_ADDR 0x100
diff --git a/include/asm-powerpc/compat.h b/include/asm-powerpc/compat.h
index accb80c..aacaabd 100644
--- a/include/asm-powerpc/compat.h
+++ b/include/asm-powerpc/compat.h
@@ -126,6 +126,11 @@
return (void __user *)(unsigned long)uptr;
}
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+ return (u32)(unsigned long)uptr;
+}
+
static inline void __user *compat_alloc_user_space(long len)
{
struct pt_regs *regs = current->thread.regs;
diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h
index 837756a..2ac63f5 100644
--- a/include/asm-powerpc/dma-mapping.h
+++ b/include/asm-powerpc/dma-mapping.h
@@ -15,7 +15,6 @@
#include <linux/mm.h>
#include <asm/scatterlist.h>
#include <asm/io.h>
-#include <asm/bug.h>
#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h
index 640a645..bda2f21 100644
--- a/include/asm-powerpc/kexec.h
+++ b/include/asm-powerpc/kexec.h
@@ -33,6 +33,7 @@
#ifdef CONFIG_KEXEC
+#ifndef __ASSEMBLY__
#ifdef __powerpc64__
/*
* This function is responsible for capturing register states if coming
@@ -104,7 +105,6 @@
struct pt_regs *oldregs) { }
#endif /* !__powerpc64 __ */
-#ifndef __ASSEMBLY__
#define MAX_NOTE_BYTES 1024
#ifdef __powerpc64__
@@ -121,6 +121,8 @@
extern int default_machine_kexec_prepare(struct kimage *image);
extern void default_machine_crash_shutdown(struct pt_regs *regs);
+extern void machine_kexec_simple(struct kimage *image);
+
#endif /* ! __ASSEMBLY__ */
#endif /* CONFIG_KEXEC */
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/pmac_pfunc.h b/include/asm-powerpc/pmac_pfunc.h
index d9728c8..cef6130 100644
--- a/include/asm-powerpc/pmac_pfunc.h
+++ b/include/asm-powerpc/pmac_pfunc.h
@@ -167,6 +167,7 @@
void *data;
struct module *owner;
struct list_head link;
+ struct pmf_function *func;
};
@@ -187,9 +188,7 @@
const char *name,
struct pmf_irq_client *client);
-extern void pmf_unregister_irq_client(struct device_node *np,
- const char *name,
- struct pmf_irq_client *client);
+extern void pmf_unregister_irq_client(struct pmf_irq_client *client);
/*
* Called by the handlers when an irq happens
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
index 5b2bd4e..cbd297f 100644
--- a/include/asm-powerpc/prom.h
+++ b/include/asm-powerpc/prom.h
@@ -222,5 +222,7 @@
extern int of_pci_address_to_resource(struct device_node *dev, int bar,
struct resource *r);
+extern void kdump_move_device_tree(void);
+
#endif /* __KERNEL__ */
#endif /* _POWERPC_PROM_H */
diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h
index 82ce476..2dc9363 100644
--- a/include/asm-powerpc/smu.h
+++ b/include/asm-powerpc/smu.h
@@ -521,6 +521,11 @@
extern struct smu_sdbp_header *smu_get_sdb_partition(int id,
unsigned int *size);
+/* Get "sdb" partition data from an SMU satellite */
+extern struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id,
+ int id, unsigned int *size);
+
+
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h
index 67cdaf3..c044ec1 100644
--- a/include/asm-powerpc/thread_info.h
+++ b/include/asm-powerpc/thread_info.h
@@ -37,7 +37,7 @@
int preempt_count; /* 0 => preemptable,
<0 => BUG */
struct restart_block restart_block;
- void *nvgprs_frame;
+ void __user *nvgprs_frame;
/* low level flags - has atomic operations done on it */
unsigned long flags ____cacheline_aligned_in_smp;
};
diff --git a/include/asm-s390/dasd.h b/include/asm-s390/dasd.h
index 77b10d6..c744ff3 100644
--- a/include/asm-s390/dasd.h
+++ b/include/asm-s390/dasd.h
@@ -8,8 +8,6 @@
* any future changes wrt the API will result in a change of the APIVERSION reported
* to userspace by the DASDAPIVER-ioctl
*
- * $Revision: 1.6 $
- *
*/
#ifndef DASD_H
@@ -206,7 +204,8 @@
*
* Here ist how the ioctl-nr should be used:
* 0 - 31 DASD driver itself
- * 32 - 239 still open
+ * 32 - 229 still open
+ * 230 - 239 DASD extended error reporting
* 240 - 255 reserved for EMC
*******************************************************************************/
@@ -238,12 +237,22 @@
#define BIODASDPSRD _IOR(DASD_IOCTL_LETTER,4,dasd_rssd_perf_stats_t)
/* Get Attributes (cache operations) */
#define BIODASDGATTR _IOR(DASD_IOCTL_LETTER,5,attrib_data_t)
+/* retrieve extended error-reporting value */
+#define BIODASDEERGET _IOR(DASD_IOCTL_LETTER,6,int)
/* #define BIODASDFORMAT _IOW(IOCTL_LETTER,0,format_data_t) , deprecated */
#define BIODASDFMT _IOW(DASD_IOCTL_LETTER,1,format_data_t)
/* Set Attributes (cache operations) */
#define BIODASDSATTR _IOW(DASD_IOCTL_LETTER,2,attrib_data_t)
+/* retrieve extended error-reporting value */
+#define BIODASDEERSET _IOW(DASD_IOCTL_LETTER,3,int)
+
+
+/* remove all records from the eer buffer */
+#define DASD_EER_PURGE _IO(DASD_IOCTL_LETTER,230)
+/* set the number of pages that are used for the internal eer buffer */
+#define DASD_EER_SETBUFSIZE _IOW(DASD_IOCTL_LETTER,230,int)
#endif /* DASD_H */
diff --git a/include/asm-s390/io.h b/include/asm-s390/io.h
index 71f55eb..b05825d 100644
--- a/include/asm-s390/io.h
+++ b/include/asm-s390/io.h
@@ -90,10 +90,16 @@
#define readb_relaxed(addr) readb(addr)
#define readw_relaxed(addr) readw(addr)
#define readl_relaxed(addr) readl(addr)
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
#define writeb(b,addr) (*(volatile unsigned char *) __io_virt(addr) = (b))
#define writew(b,addr) (*(volatile unsigned short *) __io_virt(addr) = (b))
#define writel(b,addr) (*(volatile unsigned int *) __io_virt(addr) = (b))
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
#define memset_io(a,b,c) memset(__io_virt(a),(b),(c))
#define memcpy_fromio(a,b,c) memcpy((a),__io_virt(b),(c))
diff --git a/include/asm-s390/qdio.h b/include/asm-s390/qdio.h
index 7bc15f0..a2f37a9 100644
--- a/include/asm-s390/qdio.h
+++ b/include/asm-s390/qdio.h
@@ -11,8 +11,6 @@
#ifndef __QDIO_H__
#define __QDIO_H__
-#define VERSION_QDIO_H "$Revision: 1.57 $"
-
/* note, that most of the typedef's are from ingo. */
#include <linux/interrupt.h>
diff --git a/include/asm-s390/thread_info.h b/include/asm-s390/thread_info.h
index f3797a5..8e0c7ed 100644
--- a/include/asm-s390/thread_info.h
+++ b/include/asm-s390/thread_info.h
@@ -2,7 +2,7 @@
* include/asm-s390/thread_info.h
*
* S390 version
- * Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) IBM Corp. 2002,2006
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
*/
@@ -88,7 +88,7 @@
* thread information flags bit numbers
*/
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
+#define TIF_RESTORE_SIGMASK 1 /* restore signal mask in do_signal() */
#define TIF_SIGPENDING 2 /* signal pending */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
#define TIF_RESTART_SVC 4 /* restart svc with new svc number */
@@ -102,7 +102,7 @@
#define TIF_MEMDIE 19
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
-#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
+#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_RESTART_SVC (1<<TIF_RESTART_SVC)
diff --git a/include/asm-s390/timer.h b/include/asm-s390/timer.h
index ea07889..fcd6c25 100644
--- a/include/asm-s390/timer.h
+++ b/include/asm-s390/timer.h
@@ -1,7 +1,7 @@
/*
* include/asm-s390/timer.h
*
- * (C) Copyright IBM Corp. 2003
+ * (C) Copyright IBM Corp. 2003,2006
* Virtual CPU timer
*
* Author: Jan Glauber (jang@de.ibm.com)
@@ -10,6 +10,8 @@
#ifndef _ASM_S390_TIMER_H
#define _ASM_S390_TIMER_H
+#ifdef __KERNEL__
+
#include <linux/timer.h>
#define VTIMER_MAX_SLICE (0x7ffffffffffff000LL)
@@ -43,4 +45,6 @@
extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires);
extern int del_virt_timer(struct vtimer_list *timer);
-#endif
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_S390_TIMER_H */
diff --git a/include/asm-s390/uaccess.h b/include/asm-s390/uaccess.h
index be104f2..0b7c0ca 100644
--- a/include/asm-s390/uaccess.h
+++ b/include/asm-s390/uaccess.h
@@ -61,7 +61,7 @@
#define segment_eq(a,b) ((a).ar4 == (b).ar4)
-static inline int __access_ok(const void *addr, unsigned long size)
+static inline int __access_ok(const void __user *addr, unsigned long size)
{
return 1;
}
@@ -208,25 +208,25 @@
case 1: { \
unsigned char __x; \
__get_user_asm(__x, ptr, __gu_err); \
- (x) = *(__typeof__(*(ptr)) *) &__x; \
+ (x) = *(__force __typeof__(*(ptr)) *) &__x; \
break; \
}; \
case 2: { \
unsigned short __x; \
__get_user_asm(__x, ptr, __gu_err); \
- (x) = *(__typeof__(*(ptr)) *) &__x; \
+ (x) = *(__force __typeof__(*(ptr)) *) &__x; \
break; \
}; \
case 4: { \
unsigned int __x; \
__get_user_asm(__x, ptr, __gu_err); \
- (x) = *(__typeof__(*(ptr)) *) &__x; \
+ (x) = *(__force __typeof__(*(ptr)) *) &__x; \
break; \
}; \
case 8: { \
unsigned long long __x; \
__get_user_asm(__x, ptr, __gu_err); \
- (x) = *(__typeof__(*(ptr)) *) &__x; \
+ (x) = *(__force __typeof__(*(ptr)) *) &__x; \
break; \
}; \
default: \
diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h
index 2861cdc..29a9f35 100644
--- a/include/asm-s390/unistd.h
+++ b/include/asm-s390/unistd.h
@@ -279,8 +279,24 @@
#define __NR_inotify_init 284
#define __NR_inotify_add_watch 285
#define __NR_inotify_rm_watch 286
+/* Number 287 is reserved for new sys_migrate_pages */
+#define __NR_openat 288
+#define __NR_mkdirat 289
+#define __NR_mknodat 290
+#define __NR_fchownat 291
+#define __NR_futimesat 292
+#define __NR_newfstatat 293
+#define __NR_unlinkat 294
+#define __NR_renameat 295
+#define __NR_linkat 296
+#define __NR_symlinkat 297
+#define __NR_readlinkat 298
+#define __NR_fchmodat 299
+#define __NR_faccessat 300
+#define __NR_pselect6 301
+#define __NR_ppoll 302
-#define NR_syscalls 287
+#define NR_syscalls 303
/*
* There are some system calls that are not present on 64 bit, some
@@ -539,11 +555,15 @@
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_SIGPROCMASK
#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
# ifndef CONFIG_64BIT
# define __ARCH_WANT_STAT64
# define __ARCH_WANT_SYS_TIME
# endif
-# define __ARCH_WANT_COMPAT_SYS_TIME
+# ifdef CONFIG_COMPAT
+# define __ARCH_WANT_COMPAT_SYS_TIME
+# define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+# endif
#endif
#ifdef __KERNEL_SYSCALLS__
diff --git a/include/asm-sh/bus-sh.h b/include/asm-sh/bus-sh.h
deleted file mode 100644
index e42d63b..0000000
--- a/include/asm-sh/bus-sh.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * include/asm-sh/bus-sh.h
- *
- * Copyright (C) 2004 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_BUS_SH_H
-#define __ASM_SH_BUS_SH_H
-
-extern struct bus_type sh_bus_types[];
-
-struct sh_dev {
- struct device dev;
- char *name;
- unsigned int dev_id;
- unsigned int bus_id;
- struct resource res;
- void *mapbase;
- unsigned int irq[6];
- u64 *dma_mask;
- u64 coherent_dma_mask;
-};
-
-#define to_sh_dev(d) container_of((d), struct sh_dev, dev)
-
-#define sh_get_drvdata(d) dev_get_drvdata(&(d)->dev)
-#define sh_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, (p))
-
-struct sh_driver {
- struct device_driver drv;
- unsigned int dev_id;
- unsigned int bus_id;
- int (*probe)(struct sh_dev *);
- int (*remove)(struct sh_dev *);
- int (*suspend)(struct sh_dev *, pm_message_t);
- int (*resume)(struct sh_dev *);
-};
-
-#define to_sh_driver(d) container_of((d), struct sh_driver, drv)
-#define sh_name(d) ((d)->dev.driver->name)
-
-/*
- * Device ID numbers for bus types
- */
-enum {
- SH_DEV_ID_USB_OHCI,
-};
-
-#define SH_NR_BUSES 1
-#define SH_BUS_NAME_VIRT "shbus"
-
-enum {
- SH_BUS_VIRT,
-};
-
-/* arch/sh/kernel/cpu/bus.c */
-extern int sh_device_register(struct sh_dev *dev);
-extern void sh_device_unregister(struct sh_dev *dev);
-extern int sh_driver_register(struct sh_driver *drv);
-extern void sh_driver_unregister(struct sh_driver *drv);
-
-#endif /* __ASM_SH_BUS_SH_H */
-
diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/include/asm-sh/cpu-sh3/mmu_context.h
index 5cfaa6b..a844ea0 100644
--- a/include/asm-sh/cpu-sh3/mmu_context.h
+++ b/include/asm-sh/cpu-sh3/mmu_context.h
@@ -24,5 +24,15 @@
#define MMU_NTLB_WAYS 4
#define MMU_CONTROL_INIT 0x007 /* SV=0, TF=1, IX=1, AT=1 */
+#define TRA 0xffffffd0
+#define EXPEVT 0xffffffd4
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */
+#else
+#define INTEVT 0xffffffd8
+#endif
+
#endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */
diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/include/asm-sh/cpu-sh4/mmu_context.h
index 5b64d04..ff4c5fb 100644
--- a/include/asm-sh/cpu-sh4/mmu_context.h
+++ b/include/asm-sh/cpu-sh4/mmu_context.h
@@ -23,7 +23,11 @@
#define MMU_PAGE_ASSOC_BIT 0x80
#define MMU_NTLB_ENTRIES 64 /* for 7750 */
+#ifdef CONFIG_SH_STORE_QUEUES
+#define MMU_CONTROL_INIT 0x05 /* SQMD=0, SV=0, TI=1, AT=1 */
+#else
#define MMU_CONTROL_INIT 0x205 /* SQMD=1, SV=0, TI=1, AT=1 */
+#endif
#define MMU_ITLB_DATA_ARRAY 0xF3000000
#define MMU_UTLB_DATA_ARRAY 0xF7000000
@@ -35,5 +39,9 @@
#define MMU_I_ENTRY_SHIFT 8
#define MMU_ITLB_VALID 0x100
+#define TRA 0xff000020
+#define EXPEVT 0xff000024
+#define INTEVT 0xff000028
+
#endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */
diff --git a/include/asm-sh/ioctls.h b/include/asm-sh/ioctls.h
index 1866f3f..9d84a2d 100644
--- a/include/asm-sh/ioctls.h
+++ b/include/asm-sh/ioctls.h
@@ -94,6 +94,6 @@
#define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* 0x545B */ /* Set multiport config */
#define TIOCMIWAIT _IO('T', 92) /* 0x545C */ /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT _IOR('T', 93, struct async_icount) /* 0x545D */ /* read serial port inline interrupt counts */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#endif /* __ASM_SH_IOCTLS_H */
diff --git a/include/asm-sh/irq-sh73180.h b/include/asm-sh/irq-sh73180.h
index bf2e431..d705252 100644
--- a/include/asm-sh/irq-sh73180.h
+++ b/include/asm-sh/irq-sh73180.h
@@ -25,11 +25,6 @@
#undef DMA_IPR_POS
#undef DMA_PRIORITY
-#undef NR_IRQS
-
-#undef __irq_demux
-#undef irq_demux
-
#undef INTC_IMCR0
#undef INTC_IMCR1
#undef INTC_IMCR2
@@ -229,33 +224,6 @@
#define SIU_IPR_POS 1
#define SIU_PRIORITY 3
-
-/* ONCHIP_NR_IRQS */
-#define NR_IRQS 109
-
-/* In a generic kernel, NR_IRQS is an upper bound, and we should use
- * ACTUAL_NR_IRQS (which uses the machine vector) to get the correct value.
- */
-#define ACTUAL_NR_IRQS NR_IRQS
-
-
-extern void disable_irq(unsigned int);
-extern void disable_irq_nosync(unsigned int);
-extern void enable_irq(unsigned int);
-
-/*
- * Simple Mask Register Support
- */
-extern void make_maskreg_irq(unsigned int irq);
-extern unsigned short *irq_mask_register;
-
-/*
- * Function for "on chip support modules".
- */
-extern void make_ipr_irq(unsigned int irq, unsigned int addr,
- int pos, int priority);
-extern void make_imask_irq(unsigned int irq);
-
#define PORT_PACR 0xA4050100UL
#define PORT_PBCR 0xA4050102UL
#define PORT_PCCR 0xA4050104UL
@@ -343,8 +311,6 @@
#define IRQ6_PRIORITY 1
#define IRQ7_PRIORITY 1
-extern int shmse_irq_demux(int irq);
-#define __irq_demux(irq) shmse_irq_demux(irq)
-#define irq_demux(irq) __irq_demux(irq)
+int shmse_irq_demux(int irq);
#endif /* __ASM_SH_IRQ_SH73180_H */
diff --git a/include/asm-sh/irq-sh7780.h b/include/asm-sh/irq-sh7780.h
index 8c8ca12..7f90315 100644
--- a/include/asm-sh/irq-sh7780.h
+++ b/include/asm-sh/irq-sh7780.h
@@ -299,29 +299,6 @@
#define GPIO_IPR_POS 2
#define GPIO_PRIORITY 3
-/* ONCHIP_NR_IRQS */
-#define NR_IRQS 150 /* 111 + 16 */
-
-/* In a generic kernel, NR_IRQS is an upper bound, and we should use
- * ACTUAL_NR_IRQS (which uses the machine vector) to get the correct value.
- */
-#define ACTUAL_NR_IRQS NR_IRQS
-
-extern void disable_irq(unsigned int);
-extern void disable_irq_nosync(unsigned int);
-extern void enable_irq(unsigned int);
-
-/*
- * Simple Mask Register Support
- */
-extern void make_maskreg_irq(unsigned int irq);
-extern unsigned short *irq_mask_register;
-
-/*
- * Function for "on chip support modules".
- */
-extern void make_imask_irq(unsigned int irq);
-
#define INTC_TMU0_MSK 0
#define INTC_TMU3_MSK 1
#define INTC_RTC_MSK 2
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
index 060ec3c..42b8394 100644
--- a/include/asm-sh/irq.h
+++ b/include/asm-sh/irq.h
@@ -245,6 +245,7 @@
#endif /* ST40STB1 */
#endif /* 775x / SH4-202 / ST40STB1 */
+#endif /* 7780 */
/* NR_IRQS is made from three components:
* 1. ONCHIP_NR_IRQS - number of IRLS + on-chip peripherial modules
@@ -274,8 +275,11 @@
# define ONCHIP_NR_IRQS 72
#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
# define ONCHIP_NR_IRQS 144
-#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \
+ defined(CONFIG_CPU_SUBTYPE_SH73180)
# define ONCHIP_NR_IRQS 109
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+# define ONCHIP_NR_IRQS 111
#elif defined(CONFIG_SH_UNKNOWN) /* Most be last */
# define ONCHIP_NR_IRQS 144
#endif
@@ -306,6 +310,8 @@
# define OFFCHIP_NR_IRQS 96
#elif defined (CONFIG_SH_TITAN)
# define OFFCHIP_NR_IRQS 4
+#elif defined(CONFIG_SH_R7780RP)
+# define OFFCHIP_NR_IRQS 16
#elif defined(CONFIG_SH_UNKNOWN)
# define OFFCHIP_NR_IRQS 16 /* Must also be last */
#else
@@ -550,7 +556,7 @@
#define INTC_ICR_IRLM (1<<7)
#endif
-#else
+#ifdef CONFIG_CPU_SUBTYPE_SH7780
#include <asm/irq-sh7780.h>
#endif
diff --git a/include/asm-sh/microdev/irq.h b/include/asm-sh/microdev.h
similarity index 64%
rename from include/asm-sh/microdev/irq.h
rename to include/asm-sh/microdev.h
index 47f6f77..018332a 100644
--- a/include/asm-sh/microdev/irq.h
+++ b/include/asm-sh/microdev.h
@@ -1,32 +1,27 @@
/*
- * linux/include/asm-sh/irq_microdev.h
+ * linux/include/asm-sh/microdev.h
*
* Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
*
- * IRQ functions for the SuperH SH4-202 MicroDev board.
+ * Definitions for the SuperH SH4-202 MicroDev board.
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
- *
*/
-
-
-#ifndef _ASM_SH_IRQ_MICRODEV_H
-#define _ASM_SH_IRQ_MICRODEV_H
+#ifndef __ASM_SH_MICRODEV_H
+#define __ASM_SH_MICRODEV_H
extern void init_microdev_irq(void);
extern void microdev_print_fpga_intc_status(void);
-
- /*
- * The following are useful macros for manipulating the
- * interrupt controller (INTC) on the CPU-board FPGA.
- * It should be noted that there is an INTC on the FPGA,
- * and a seperate INTC on the SH4-202 core - these are
- * two different things, both of which need to be prorammed
- * to correctly route - unfortunately, they have the
- * same name and abbreviations!
- */
+/*
+ * The following are useful macros for manipulating the interrupt
+ * controller (INTC) on the CPU-board FPGA. should be noted that there
+ * is an INTC on the FPGA, and a seperate INTC on the SH4-202 core -
+ * these are two different things, both of which need to be prorammed to
+ * correctly route - unfortunately, they have the same name and
+ * abbreviations!
+ */
#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */
#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */
#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */
@@ -38,10 +33,10 @@
#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */
- /*
- * The following are the IRQ numbers for the Linux Kernel for external interrupts.
- * i.e. the numbers seen by 'cat /proc/interrupt'.
- */
+/*
+ * The following are the IRQ numbers for the Linux Kernel for external
+ * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'.
+ */
#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */
#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */
@@ -51,10 +46,11 @@
#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */
#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */
- /*
- * The following are the IRQ numbers for the INTC on the FPGA for external interrupts.
- * i.e. the bits in the INTC registers in the FPGA.
- */
+/*
+ * The following are the IRQ numbers for the INTC on the FPGA for
+ * external interrupts. i.e. the bits in the INTC registers in the
+ * FPGA.
+ */
#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */
#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */
@@ -69,4 +65,16 @@
#define MICRODEV_IRQ_PCI_INTC 10
#define MICRODEV_IRQ_PCI_INTD 11
-#endif /* _ASM_SH_IRQ_MICRODEV_H */
+#define __IO_PREFIX microdev
+#include <asm/io_generic.h>
+
+#if defined(CONFIG_PCI)
+unsigned char microdev_pci_inb(unsigned long port);
+unsigned short microdev_pci_inw(unsigned long port);
+unsigned long microdev_pci_inl(unsigned long port);
+void microdev_pci_outb(unsigned char data, unsigned long port);
+void microdev_pci_outw(unsigned short data, unsigned long port);
+void microdev_pci_outl(unsigned long data, unsigned long port);
+#endif
+
+#endif /* __ASM_SH_MICRODEV_H */
diff --git a/include/asm-sh/microdev/io.h b/include/asm-sh/microdev/io.h
deleted file mode 100644
index f2ca4ac..0000000
--- a/include/asm-sh/microdev/io.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/include/asm-sh/io_microdev.h
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * IO functions for the SuperH SH4-202 MicroDev board.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- */
-
-
-#ifndef _ASM_SH_IO_MICRODEV_H
-#define _ASM_SH_IO_MICRODEV_H
-
-extern unsigned long microdev_isa_port2addr(unsigned long offset);
-
-extern unsigned char microdev_inb(unsigned long port);
-extern unsigned short microdev_inw(unsigned long port);
-extern unsigned int microdev_inl(unsigned long port);
-
-extern void microdev_outb(unsigned char value, unsigned long port);
-extern void microdev_outw(unsigned short value, unsigned long port);
-extern void microdev_outl(unsigned int value, unsigned long port);
-
-extern unsigned char microdev_inb_p(unsigned long port);
-extern unsigned short microdev_inw_p(unsigned long port);
-extern unsigned int microdev_inl_p(unsigned long port);
-
-extern void microdev_outb_p(unsigned char value, unsigned long port);
-extern void microdev_outw_p(unsigned short value, unsigned long port);
-extern void microdev_outl_p(unsigned int value, unsigned long port);
-
-extern void microdev_insb(unsigned long port, void *addr, unsigned long count);
-extern void microdev_insw(unsigned long port, void *addr, unsigned long count);
-extern void microdev_insl(unsigned long port, void *addr, unsigned long count);
-
-extern void microdev_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void microdev_outsw(unsigned long port, const void *addr, unsigned long count);
-extern void microdev_outsl(unsigned long port, const void *addr, unsigned long count);
-
-#if defined(CONFIG_PCI)
-extern unsigned char microdev_pci_inb(unsigned long port);
-extern unsigned short microdev_pci_inw(unsigned long port);
-extern unsigned long microdev_pci_inl(unsigned long port);
-extern void microdev_pci_outb(unsigned char data, unsigned long port);
-extern void microdev_pci_outw(unsigned short data, unsigned long port);
-extern void microdev_pci_outl(unsigned long data, unsigned long port);
-#endif
-
-#endif /* _ASM_SH_IO_MICRODEV_H */
-
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index c490479..fa5bd2d 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -12,7 +12,6 @@
#include <asm/page.h>
#include <asm/types.h>
#include <asm/cache.h>
-#include <linux/threads.h>
#include <asm/ptrace.h>
/*
@@ -30,7 +29,7 @@
* CPU type and hardware bug flags. Kept separately for each CPU.
*
* Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry
- * in arch/sh/Kconfig, as well as an entry in arch/sh/kernel/setup.c
+ * in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c
* for parsing the subtype in get_cpu_subtype().
*/
enum cpu_type {
@@ -44,7 +43,7 @@
/* SH-4 types */
CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501,
- CPU_SH73180,
+ CPU_SH73180, CPU_SH7770, CPU_SH7780, CPU_SH7781,
/* Unknown subtype */
CPU_SH_NONE
@@ -52,14 +51,8 @@
struct sh_cpuinfo {
enum cpu_type type;
- char hard_math;
unsigned long loops_per_jiffy;
- unsigned int cpu_clock, master_clock, bus_clock, module_clock;
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
- unsigned int memory_clock;
-#endif
-
struct cache_info icache;
struct cache_info dcache;
@@ -131,7 +124,7 @@
struct sh_fpu_soft_struct soft;
};
-/*
+/*
* Processor flags
*/
@@ -140,6 +133,7 @@
#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */
#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */
#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */
+#define CPU_HAS_PTEA 0x0020 /* PTEA register */
struct thread_struct {
unsigned long sp;
@@ -160,10 +154,10 @@
#define INIT_THREAD { \
sizeof(init_stack) + (long) &init_stack, /* sp */ \
0, /* pc */ \
- 0, 0, \
- 0, \
- 0, \
- {{{0,}},} /* fpu state */ \
+ 0, 0, \
+ 0, \
+ 0, \
+ {{{0,}},} /* fpu state */ \
}
/*
@@ -171,7 +165,7 @@
*/
#define start_thread(regs, new_pc, new_sp) \
set_fs(USER_DS); \
- regs->pr = 0; \
+ regs->pr = 0; \
regs->sr = SR_FD; /* User mode. */ \
regs->pc = new_pc; \
regs->regs[15] = new_sp
@@ -239,16 +233,16 @@
#define save_fpu(tsk) do { } while (0)
#endif
-#define unlazy_fpu(tsk, regs) do { \
+#define unlazy_fpu(tsk, regs) do { \
if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \
- save_fpu(tsk, regs); \
+ save_fpu(tsk, regs); \
} \
} while (0)
-#define clear_fpu(tsk, regs) do { \
- if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \
- clear_tsk_thread_flag(tsk, TIF_USEDFPU); \
- release_fpu(regs); \
+#define clear_fpu(tsk, regs) do { \
+ if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \
+ clear_tsk_thread_flag(tsk, TIF_USEDFPU); \
+ release_fpu(regs); \
} \
} while (0)
diff --git a/include/asm-sh64/ioctls.h b/include/asm-sh64/ioctls.h
index 08f3c1f..6b0c04f 100644
--- a/include/asm-sh64/ioctls.h
+++ b/include/asm-sh64/ioctls.h
@@ -111,6 +111,6 @@
#define TIOCSERSETMULTI 0x40a8545b /* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */
#define TIOCMIWAIT 0x545c /* _IO('T', 92) wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x802c545d /* _IOR('T', 93, struct async_icount) 0x545D */ /* read serial port inline interrupt counts */
+#define TIOCGICOUNT 0x545d /* read serial port inline interrupt counts */
#endif /* __ASM_SH64_IOCTLS_H */
diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h
index 2ac64e6..0615d60 100644
--- a/include/asm-sparc/unistd.h
+++ b/include/asm-sparc/unistd.h
@@ -315,11 +315,12 @@
#define __NR_faccessat 296
#define __NR_pselect6 297
#define __NR_ppoll 298
+#define __NR_unshare 299
-/* WARNING: You MAY NOT add syscall numbers larger than 298, since
+/* WARNING: You MAY NOT add syscall numbers larger than 299, since
* all of the syscall tables in the Sparc kernel are
- * sized to have 298 entries (starting at zero). Therefore
- * find a free slot in the 0-298 range.
+ * sized to have 299 entries (starting at zero). Therefore
+ * find a free slot in the 0-299 range.
*/
#define _syscall0(type,name) \
diff --git a/include/asm-sparc64/spinlock.h b/include/asm-sparc64/spinlock.h
index ec85d12..508c416 100644
--- a/include/asm-sparc64/spinlock.h
+++ b/include/asm-sparc64/spinlock.h
@@ -131,6 +131,28 @@
: "memory");
}
+static int inline __read_trylock(raw_rwlock_t *lock)
+{
+ int tmp1, tmp2;
+
+ __asm__ __volatile__ (
+"1: ldsw [%2], %0\n"
+" brlz,a,pn %0, 2f\n"
+" mov 0, %0\n"
+" add %0, 1, %1\n"
+" cas [%2], %0, %1\n"
+" cmp %0, %1\n"
+" membar #StoreLoad | #StoreStore\n"
+" bne,pn %%icc, 1b\n"
+" mov 1, %0\n"
+"2:"
+ : "=&r" (tmp1), "=&r" (tmp2)
+ : "r" (lock)
+ : "memory");
+
+ return tmp1;
+}
+
static void inline __read_unlock(raw_rwlock_t *lock)
{
unsigned long tmp1, tmp2;
@@ -211,12 +233,12 @@
}
#define __raw_read_lock(p) __read_lock(p)
+#define __raw_read_trylock(p) __read_trylock(p)
#define __raw_read_unlock(p) __read_unlock(p)
#define __raw_write_lock(p) __write_lock(p)
#define __raw_write_unlock(p) __write_unlock(p)
#define __raw_write_trylock(p) __write_trylock(p)
-#define __raw_read_trylock(lock) generic__raw_read_trylock(lock)
#define __raw_read_can_lock(rw) (!((rw)->lock & 0x80000000UL))
#define __raw_write_can_lock(rw) (!(rw)->lock)
diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h
index 84ac2bd..c58ba8a 100644
--- a/include/asm-sparc64/unistd.h
+++ b/include/asm-sparc64/unistd.h
@@ -317,11 +317,12 @@
#define __NR_faccessat 296
#define __NR_pselect6 297
#define __NR_ppoll 298
+#define __NR_unshare 299
-/* WARNING: You MAY NOT add syscall numbers larger than 298, since
+/* WARNING: You MAY NOT add syscall numbers larger than 299, since
* all of the syscall tables in the Sparc kernel are
- * sized to have 298 entries (starting at zero). Therefore
- * find a free slot in the 0-298 range.
+ * sized to have 299 entries (starting at zero). Therefore
+ * find a free slot in the 0-299 range.
*/
#define _syscall0(type,name) \
diff --git a/include/asm-um/ldt-x86_64.h b/include/asm-um/ldt-x86_64.h
index 175722a..96b35aa 100644
--- a/include/asm-um/ldt-x86_64.h
+++ b/include/asm-um/ldt-x86_64.h
@@ -5,8 +5,8 @@
* Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
*/
-#ifndef __ASM_LDT_I386_H
-#define __ASM_LDT_I386_H
+#ifndef __ASM_LDT_X86_64_H
+#define __ASM_LDT_X86_64_H
#include "asm/semaphore.h"
#include "asm/arch/ldt.h"
@@ -39,11 +39,13 @@
} uml_ldt_t;
/*
- * macros stolen from include/asm-i386/desc.h
+ * macros stolen from include/asm-x86_64/desc.h
*/
#define LDT_entry_a(info) \
((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
+/* Don't allow setting of the lm bit. It is useless anyways because
+ * 64bit system calls require __USER_CS. */
#define LDT_entry_b(info) \
(((info)->base_addr & 0xff000000) | \
(((info)->base_addr & 0x00ff0000) >> 16) | \
@@ -54,6 +56,7 @@
((info)->seg_32bit << 22) | \
((info)->limit_in_pages << 23) | \
((info)->useable << 20) | \
+ /* ((info)->lm << 21) | */ \
0x7000)
#define LDT_empty(info) (\
@@ -64,6 +67,7 @@
(info)->seg_32bit == 0 && \
(info)->limit_in_pages == 0 && \
(info)->seg_not_present == 1 && \
- (info)->useable == 0 )
+ (info)->useable == 0 && \
+ (info)->lm == 0)
#endif
diff --git a/include/asm-um/smp.h b/include/asm-um/smp.h
index d879eba..aeda665 100644
--- a/include/asm-um/smp.h
+++ b/include/asm-um/smp.h
@@ -23,6 +23,8 @@
{
}
+extern struct task_struct *idle_threads[NR_CPUS];
+
#endif
#endif
diff --git a/include/asm-v850/bitops.h b/include/asm-v850/bitops.h
index 8955d23..609b9e8 100644
--- a/include/asm-v850/bitops.h
+++ b/include/asm-v850/bitops.h
@@ -188,7 +188,7 @@
tmp = *p;
found_first:
- tmp |= ~0UL >> size;
+ tmp |= ~0UL << size;
found_middle:
return result + ffz (tmp);
}
diff --git a/include/asm-x86_64/apic.h b/include/asm-x86_64/apic.h
index 4f6a4dc..bdbd893 100644
--- a/include/asm-x86_64/apic.h
+++ b/include/asm-x86_64/apic.h
@@ -17,6 +17,7 @@
#define APIC_DEBUG 2
extern int apic_verbosity;
+extern int apic_runs_main_timer;
/*
* Define the default level of output to be very little
diff --git a/include/asm-x86_64/cpufeature.h b/include/asm-x86_64/cpufeature.h
index 41c0ac8..76bb619 100644
--- a/include/asm-x86_64/cpufeature.h
+++ b/include/asm-x86_64/cpufeature.h
@@ -61,7 +61,7 @@
#define X86_FEATURE_K6_MTRR (3*32+ 1) /* AMD K6 nonstandard MTRRs */
#define X86_FEATURE_CYRIX_ARR (3*32+ 2) /* Cyrix ARRs (= MTRRs) */
#define X86_FEATURE_CENTAUR_MCR (3*32+ 3) /* Centaur MCRs (= MTRRs) */
-/* 4 free */
+#define X86_FEATURE_REP_GOOD (3*32+ 4) /* rep microcode works well on this CPU */
#define X86_FEATURE_CONSTANT_TSC (3*32+5) /* TSC runs at constant rate */
#define X86_FEATURE_SYNC_RDTSC (3*32+6) /* RDTSC syncs CPU core */
diff --git a/include/asm-x86_64/hardirq.h b/include/asm-x86_64/hardirq.h
index 8661b47..8689951 100644
--- a/include/asm-x86_64/hardirq.h
+++ b/include/asm-x86_64/hardirq.h
@@ -16,23 +16,6 @@
#define set_softirq_pending(x) write_pda(__softirq_pending, (x))
#define or_softirq_pending(x) or_pda(__softirq_pending, (x))
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves.
- */
-static inline void ack_bad_irq(unsigned int irq)
-{
- printk("unexpected IRQ trap at vector %02x\n", irq);
-#ifdef CONFIG_X86_LOCAL_APIC
- /*
- * Currently unexpected vectors happen only on SMP and APIC.
- * We _must_ ack these because every local APIC has only N
- * irq slots per priority level, and a 'hanging, unacked' IRQ
- * holds up an irq slot - in excessive cases (when multiple
- * unexpected vectors occur) that might lock up the APIC
- * completely.
- */
- ack_APIC_irq();
-#endif
-}
+extern void ack_bad_irq(unsigned int irq);
+
#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-x86_64/ia32_unistd.h b/include/asm-x86_64/ia32_unistd.h
index e87cd83..2046898 100644
--- a/include/asm-x86_64/ia32_unistd.h
+++ b/include/asm-x86_64/ia32_unistd.h
@@ -300,7 +300,7 @@
#define __NR_ia32_inotify_add_watch 292
#define __NR_ia32_inotify_rm_watch 293
#define __NR_ia32_migrate_pages 294
-#define __NR_ia32_opanat 295
+#define __NR_ia32_openat 295
#define __NR_ia32_mkdirat 296
#define __NR_ia32_mknodat 297
#define __NR_ia32_fchownat 298
@@ -313,7 +313,10 @@
#define __NR_ia32_readlinkat 305
#define __NR_ia32_fchmodat 306
#define __NR_ia32_faccessat 307
+#define __NR_ia32_pselect6 308
+#define __NR_ia32_ppoll 309
+#define __NR_ia32_unshare 310
-#define IA32_NR_syscalls 308 /* must be > than biggest syscall! */
+#define IA32_NR_syscalls 315 /* must be > than biggest syscall! */
#endif /* _ASM_X86_64_IA32_UNISTD_H_ */
diff --git a/include/asm-x86_64/kexec.h b/include/asm-x86_64/kexec.h
index ae28cd4..c564bae 100644
--- a/include/asm-x86_64/kexec.h
+++ b/include/asm-x86_64/kexec.h
@@ -1,8 +1,9 @@
#ifndef _X86_64_KEXEC_H
#define _X86_64_KEXEC_H
+#include <linux/string.h>
+
#include <asm/page.h>
-#include <asm/proto.h>
#include <asm/ptrace.h>
/*
diff --git a/include/asm-x86_64/mpspec.h b/include/asm-x86_64/mpspec.h
index 10248a9..14fc3dd 100644
--- a/include/asm-x86_64/mpspec.h
+++ b/include/asm-x86_64/mpspec.h
@@ -188,7 +188,7 @@
extern void mp_register_ioapic (u8 id, u32 address, u32 gsi_base);
extern void mp_override_legacy_irq (u8 bus_irq, u8 polarity, u8 trigger, u32 gsi);
extern void mp_config_acpi_legacy_irqs (void);
-extern int mp_register_gsi (u32 gsi, int edge_level, int active_high_low);
+extern int mp_register_gsi (u32 gsi, int triggering, int polarity);
#endif /*CONFIG_X86_IO_APIC*/
#endif
diff --git a/include/asm-x86_64/numa.h b/include/asm-x86_64/numa.h
index 34e434c..dffe276 100644
--- a/include/asm-x86_64/numa.h
+++ b/include/asm-x86_64/numa.h
@@ -22,8 +22,15 @@
extern unsigned char apicid_to_node[256];
#ifdef CONFIG_NUMA
extern void __init init_cpu_to_node(void);
+
+static inline void clear_node_cpumask(int cpu)
+{
+ clear_bit(cpu, &node_to_cpumask[cpu_to_node(cpu)]);
+}
+
#else
#define init_cpu_to_node() do {} while (0)
+#define clear_node_cpumask(cpu) do {} while (0)
#endif
#define NUMA_NO_NODE 0xff
diff --git a/include/asm-x86_64/proto.h b/include/asm-x86_64/proto.h
index 115e496..c99832e 100644
--- a/include/asm-x86_64/proto.h
+++ b/include/asm-x86_64/proto.h
@@ -41,10 +41,18 @@
extern void time_init_gtod(void);
extern int pmtimer_mark_offset(void);
+extern void pmtimer_resume(void);
+extern void pmtimer_wait(unsigned);
extern unsigned int do_gettimeoffset_pm(void);
+#ifdef CONFIG_X86_PM_TIMER
extern u32 pmtmr_ioport;
+#else
+#define pmtmr_ioport 0
+#endif
extern unsigned long long monotonic_base;
extern int sysctl_vsyscall;
+extern int nohpet;
+extern unsigned long vxtime_hz;
extern void do_softirq_thunk(void);
@@ -65,6 +73,9 @@
extern void load_gs_index(unsigned gs);
+extern void stop_timer_interrupt(void);
+extern void main_timer_handler(struct pt_regs *regs);
+
extern unsigned long end_pfn_map;
extern void show_trace(unsigned long * rsp);
diff --git a/include/asm-x86_64/system.h b/include/asm-x86_64/system.h
index a73f0c7..b7f6603 100644
--- a/include/asm-x86_64/system.h
+++ b/include/asm-x86_64/system.h
@@ -327,7 +327,7 @@
#define wmb() asm volatile("" ::: "memory")
#endif
#define read_barrier_depends() do {} while(0)
-#define set_mb(var, value) do { xchg(&var, value); } while (0)
+#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#define warn_if_not_ulong(x) do { unsigned long foo; (void) (&(x) == &foo); } while (0)
diff --git a/include/asm-x86_64/topology.h b/include/asm-x86_64/topology.h
index 2fa7f27..c642f5d 100644
--- a/include/asm-x86_64/topology.h
+++ b/include/asm-x86_64/topology.h
@@ -57,6 +57,15 @@
#endif
+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu) \
+ (phys_proc_id[cpu] == BAD_APICID ? -1 : phys_proc_id[cpu])
+#define topology_core_id(cpu) \
+ (cpu_core_id[cpu] == BAD_APICID ? 0 : cpu_core_id[cpu])
+#define topology_core_siblings(cpu) (cpu_core_map[cpu])
+#define topology_thread_siblings(cpu) (cpu_sibling_map[cpu])
+#endif
+
#include <asm-generic/topology.h>
#endif
diff --git a/include/asm-x86_64/unistd.h b/include/asm-x86_64/unistd.h
index 436d099..da0341c 100644
--- a/include/asm-x86_64/unistd.h
+++ b/include/asm-x86_64/unistd.h
@@ -599,8 +599,14 @@
__SYSCALL(__NR_fchmodat, sys_fchmodat)
#define __NR_faccessat 269
__SYSCALL(__NR_faccessat, sys_faccessat)
+#define __NR_pselect6 270
+__SYSCALL(__NR_pselect6, sys_ni_syscall) /* for now */
+#define __NR_ppoll 271
+__SYSCALL(__NR_ppoll, sys_ni_syscall) /* for now */
+#define __NR_unshare 272
+__SYSCALL(__NR_unshare, sys_unshare)
-#define __NR_syscall_max __NR_faccessat
+#define __NR_syscall_max __NR_unshare
#ifndef __NO_STUBS
diff --git a/include/asm-xtensa/futex.h b/include/asm-xtensa/futex.h
new file mode 100644
index 0000000..0b74582
--- /dev/null
+++ b/include/asm-xtensa/futex.h
@@ -0,0 +1 @@
+#include <asm-generic/futex.h>
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 026c3c0..84d3d9f 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -435,7 +435,7 @@
#endif /* !CONFIG_ACPI */
-int acpi_register_gsi (u32 gsi, int edge_level, int active_high_low);
+int acpi_register_gsi (u32 gsi, int triggering, int polarity);
int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
/*
diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h
index 17a17c5..6d59c8e 100644
--- a/include/linux/agpgart.h
+++ b/include/linux/agpgart.h
@@ -111,6 +111,7 @@
} agp_unbind;
#else /* __KERNEL__ */
+#include <linux/mutex.h>
#define AGPGART_MINOR 175
@@ -201,7 +202,7 @@
};
struct agp_front_data {
- struct semaphore agp_mutex;
+ struct mutex agp_mutex;
struct agp_controller *current_controller;
struct agp_controller *controllers;
struct agp_file_private *file_priv_list;
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
index 6a2a19f..208650b 100644
--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -81,7 +81,7 @@
{
__u32 h = x >> 32;
if (h)
- return fls(x) + 32;
+ return fls(h) + 32;
return fls(x);
}
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 02a585f..860e7a4 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -392,8 +392,8 @@
unsigned int nr_congestion_off;
unsigned int nr_batching;
- unsigned short max_sectors;
- unsigned short max_hw_sectors;
+ unsigned int max_sectors;
+ unsigned int max_hw_sectors;
unsigned short max_phys_segments;
unsigned short max_hw_segments;
unsigned short hardsect_size;
@@ -697,7 +697,7 @@
extern void blk_cleanup_queue(request_queue_t *);
extern void blk_queue_make_request(request_queue_t *, make_request_fn *);
extern void blk_queue_bounce_limit(request_queue_t *, u64);
-extern void blk_queue_max_sectors(request_queue_t *, unsigned short);
+extern void blk_queue_max_sectors(request_queue_t *, unsigned int);
extern void blk_queue_max_phys_segments(request_queue_t *, unsigned short);
extern void blk_queue_max_hw_segments(request_queue_t *, unsigned short);
extern void blk_queue_max_segment_size(request_queue_t *, unsigned int);
diff --git a/include/linux/configfs.h b/include/linux/configfs.h
index acffb8c..a7f0150 100644
--- a/include/linux/configfs.h
+++ b/include/linux/configfs.h
@@ -126,7 +126,7 @@
struct configfs_attribute {
- char *ca_name;
+ const char *ca_name;
struct module *ca_owner;
mode_t ca_mode;
};
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index c31650d..17866d7 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -14,6 +14,7 @@
#ifndef _LINUX_CPUFREQ_H
#define _LINUX_CPUFREQ_H
+#include <linux/mutex.h>
#include <linux/config.h>
#include <linux/notifier.h>
#include <linux/threads.h>
@@ -82,7 +83,7 @@
unsigned int policy; /* see above */
struct cpufreq_governor *governor; /* see below */
- struct semaphore lock; /* CPU ->setpolicy or ->target may
+ struct mutex lock; /* CPU ->setpolicy or ->target may
only be called once a time */
struct work_struct update; /* if update_policy() needs to be
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 13e9f4a..20b446f 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -84,7 +84,6 @@
#include <linux/kernel.h>
#include <linux/threads.h>
#include <linux/bitmap.h>
-#include <asm/bug.h>
typedef struct { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t;
extern cpumask_t _unused_cpumask_arg_;
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index a3ed5e0..4361f37 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -8,7 +8,6 @@
#include <linux/spinlock.h>
#include <linux/cache.h>
#include <linux/rcupdate.h>
-#include <asm/bug.h>
struct nameidata;
struct vfsmount;
@@ -108,7 +107,9 @@
struct dentry_operations *d_op;
struct super_block *d_sb; /* The root of the dentry tree */
void *d_fsdata; /* fs-specific data */
+#ifdef CONFIG_PROFILING
struct dcookie_struct *d_cookie; /* cookie, if any */
+#endif
int d_mounted;
unsigned char d_iname[DNAME_INLINE_LEN_MIN]; /* small names */
};
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 83c7d20..51e0e95 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -91,7 +91,7 @@
};
struct io_restrictions {
- unsigned short max_sectors;
+ unsigned int max_sectors;
unsigned short max_phys_segments;
unsigned short max_hw_segments;
unsigned short hardsect_size;
diff --git a/include/linux/dvb/video.h b/include/linux/dvb/video.h
index b1999bf..b81e58b 100644
--- a/include/linux/dvb/video.h
+++ b/include/linux/dvb/video.h
@@ -135,7 +135,7 @@
typedef struct video_spu_palette { /* SPU Palette information */
int length;
- uint8_t *palette;
+ uint8_t __user *palette;
} video_spu_palette_t;
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index 23fe746..18cf1f3 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -82,6 +82,7 @@
extern void elv_dispatch_sort(request_queue_t *, struct request *);
extern void elv_add_request(request_queue_t *, struct request *, int, int);
extern void __elv_add_request(request_queue_t *, struct request *, int, int);
+extern void elv_insert(request_queue_t *, struct request *, int);
extern int elv_merge(request_queue_t *, struct request **, struct bio *);
extern void elv_merge_requests(request_queue_t *, struct request *,
struct request *);
diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h
index dbd7bb4..0cf0bea 100644
--- a/include/linux/elfcore.h
+++ b/include/linux/elfcore.h
@@ -5,6 +5,7 @@
#include <linux/signal.h>
#include <linux/time.h>
#include <linux/user.h>
+#include <linux/ptrace.h>
struct elf_siginfo
{
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 84bb449..e059da9 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -363,6 +363,8 @@
loff_t offset, unsigned long nr_segs);
struct page* (*get_xip_page)(struct address_space *, sector_t,
int);
+ /* migrate the contents of a page to the specified target */
+ int (*migratepage) (struct page *, struct page *);
};
struct backing_dev_info;
@@ -1719,6 +1721,12 @@
extern ssize_t simple_read_from_buffer(void __user *, size_t, loff_t *, const void *, size_t);
+#ifdef CONFIG_MIGRATION
+extern int buffer_migrate_page(struct page *, struct page *);
+#else
+#define buffer_migrate_page NULL
+#endif
+
extern int inode_change_ok(struct inode *, struct iattr *);
extern int __must_check inode_setattr(struct inode *, struct iattr *);
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index 528959c..5425b60 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -14,7 +14,7 @@
#define FUSE_KERNEL_VERSION 7
/** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 5
+#define FUSE_KERNEL_MINOR_VERSION 6
/** The node ID of the root inode */
#define FUSE_ROOT_ID 1
@@ -58,6 +58,9 @@
__u32 spare[6];
};
+/**
+ * Bitmasks for fuse_setattr_in.valid
+ */
#define FATTR_MODE (1 << 0)
#define FATTR_UID (1 << 1)
#define FATTR_GID (1 << 2)
@@ -75,6 +78,11 @@
#define FOPEN_DIRECT_IO (1 << 0)
#define FOPEN_KEEP_CACHE (1 << 1)
+/**
+ * INIT request/reply flags
+ */
+#define FUSE_ASYNC_READ (1 << 0)
+
enum fuse_opcode {
FUSE_LOOKUP = 1,
FUSE_FORGET = 2, /* no reply */
@@ -247,12 +255,16 @@
struct fuse_init_in {
__u32 major;
__u32 minor;
+ __u32 max_readahead;
+ __u32 flags;
};
struct fuse_init_out {
__u32 major;
__u32 minor;
- __u32 unused[3];
+ __u32 max_readahead;
+ __u32 flags;
+ __u32 unused;
__u32 max_write;
};
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 089bfb1..6361544 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -40,6 +40,7 @@
enum hrtimer_state {
HRTIMER_INACTIVE, /* Timer is inactive */
HRTIMER_EXPIRED, /* Timer is expired */
+ HRTIMER_RUNNING, /* Timer is running the callback function */
HRTIMER_PENDING, /* Timer is pending */
};
@@ -100,9 +101,8 @@
/* Exported timer functions: */
/* Initialize timers: */
-extern void hrtimer_init(struct hrtimer *timer, const clockid_t which_clock);
-extern void hrtimer_rebase(struct hrtimer *timer, const clockid_t which_clock);
-
+extern void hrtimer_init(struct hrtimer *timer, clockid_t which_clock,
+ enum hrtimer_mode mode);
/* Basic timer operations: */
extern int hrtimer_start(struct hrtimer *timer, ktime_t tim,
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 7863a59..63f1d63 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -100,6 +100,9 @@
/* Returns the number of read bytes */
extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
u8 command, u8 *values);
+extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
+ u8 command, u8 length,
+ u8 *values);
/*
* A driver is capable of handling one or more physical devices present on
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
index 9ba8067..5a9d8c5 100644
--- a/include/linux/i2o.h
+++ b/include/linux/i2o.h
@@ -1115,9 +1115,11 @@
return ERR_PTR(-ENOMEM);
mmsg->mfa = readl(c->in_port);
- if (mmsg->mfa == I2O_QUEUE_EMPTY) {
+ if (unlikely(mmsg->mfa >= c->in_queue.len)) {
mempool_free(mmsg, c->in_msg.mempool);
- return ERR_PTR(-EBUSY);
+ if(mmsg->mfa == I2O_QUEUE_EMPTY)
+ return ERR_PTR(-EBUSY);
+ return ERR_PTR(-EFAULT);
}
return &mmsg->msg;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 110b3cf..a7fc4cc 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -582,7 +582,6 @@
unsigned noprobe : 1; /* from: hdx=noprobe */
unsigned removable : 1; /* 1 if need to do check_media_change */
unsigned attach : 1; /* needed for removable devices */
- unsigned is_flash : 1; /* 1 if probed as flash */
unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */
unsigned no_unmask : 1; /* disallow setting unmask bit */
unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */
@@ -1006,7 +1005,6 @@
extern int noautodma;
extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs);
-extern int __ide_end_request (ide_drive_t *drive, struct request *rq, int uptodate, int nrsecs);
/*
* This is used on exit from the driver to designate the next irq handler
diff --git a/include/linux/io.h b/include/linux/io.h
new file mode 100644
index 0000000..85533ec
--- /dev/null
+++ b/include/linux/io.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2006 PathScale, Inc. All Rights Reserved.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _LINUX_IO_H
+#define _LINUX_IO_H
+
+#include <asm/io.h>
+
+void __iowrite32_copy(void __iomem *to, const void *from, size_t count);
+
+#endif /* _LINUX_IO_H */
diff --git a/include/linux/ioc3.h b/include/linux/ioc3.h
index e7906a7..da7c09e 100644
--- a/include/linux/ioc3.h
+++ b/include/linux/ioc3.h
@@ -27,7 +27,7 @@
int id; /* IOC3 sequence number */
/* PCI mapping */
unsigned long pma; /* physical address */
- struct __iomem ioc3 *vma; /* pointer to registers */
+ struct ioc3 __iomem *vma; /* pointer to registers */
struct pci_dev *pdev; /* PCI device */
/* IRQ stuff */
int dual_irq; /* set if separate IRQs are used */
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index 558cb4c..0fe4aa8 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -23,6 +23,7 @@
#define jfs_debug jbd_debug
#else
+#include <linux/types.h>
#include <linux/buffer_head.h>
#include <linux/journal-head.h>
#include <linux/stddef.h>
@@ -238,7 +239,6 @@
#include <linux/fs.h>
#include <linux/sched.h>
-#include <asm/bug.h>
#define JBD_ASSERTIONS
#ifdef JBD_ASSERTIONS
@@ -618,6 +618,7 @@
* @j_wbuf: array of buffer_heads for journal_commit_transaction
* @j_wbufsize: maximum number of buffer_heads allowed in j_wbuf, the
* number that will fit in j_blocksize
+ * @j_last_sync_writer: most recent pid which did a synchronous write
* @j_private: An opaque pointer to fs-private information.
*/
@@ -807,6 +808,8 @@
struct buffer_head **j_wbuf;
int j_wbufsize;
+ pid_t j_last_sync_writer;
+
/*
* An opaque pointer to fs-private information. ext3 puts its
* superblock pointer here
diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h
index 45f625d..3aed373 100644
--- a/include/linux/kbd_kern.h
+++ b/include/linux/kbd_kern.h
@@ -151,6 +151,11 @@
static inline void con_schedule_flip(struct tty_struct *t)
{
+ unsigned long flags;
+ spin_lock_irqsave(&t->buf.lock, flags);
+ if (t->buf.tail != NULL)
+ t->buf.tail->active = 0;
+ spin_unlock_irqrestore(&t->buf.lock, flags);
schedule_work(&t->buf.work);
}
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index a536332..b49affa 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -185,6 +185,7 @@
SYSTEM_HALT,
SYSTEM_POWER_OFF,
SYSTEM_RESTART,
+ SYSTEM_SUSPEND_DISK,
} system_state;
#define TAINT_PROPRIETARY_MODULE (1<<0)
diff --git a/include/linux/ktime.h b/include/linux/ktime.h
index 1bd6552..6aca67a 100644
--- a/include/linux/ktime.h
+++ b/include/linux/ktime.h
@@ -10,6 +10,12 @@
*
* Started by: Thomas Gleixner and Ingo Molnar
*
+ * Credits:
+ *
+ * Roman Zippel provided the ideas and primary code snippets of
+ * the ktime_t union and further simplifications of the original
+ * code.
+ *
* For licencing details see kernel-base/COPYING
*/
#ifndef _LINUX_KTIME_H
diff --git a/include/linux/libata.h b/include/linux/libata.h
index f8a04ef5..29c7819 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -163,6 +163,9 @@
ATA_FLAG_PIO_LBA48 = (1 << 13), /* Host DMA engine is LBA28 only */
ATA_FLAG_IRQ_MASK = (1 << 14), /* Mask IRQ in PIO xfers */
+ ATA_FLAG_FLUSH_PIO_TASK = (1 << 15), /* Flush PIO task */
+ ATA_FLAG_IN_EH = (1 << 16), /* EH in progress */
+
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
ATA_QCFLAG_SINGLE = (1 << 4), /* no s/g, just a single buffer */
@@ -246,6 +249,9 @@
/* typedefs */
typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc);
+typedef void (*ata_probeinit_fn_t)(struct ata_port *);
+typedef int (*ata_reset_fn_t)(struct ata_port *, int, unsigned int *);
+typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *);
struct ata_ioports {
unsigned long cmd_addr;
@@ -481,6 +487,16 @@
extern void __sata_phy_reset(struct ata_port *ap);
extern void sata_phy_reset(struct ata_port *ap);
extern void ata_bus_reset(struct ata_port *ap);
+extern int ata_drive_probe_reset(struct ata_port *ap,
+ ata_probeinit_fn_t probeinit,
+ ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
+ ata_postreset_fn_t postreset, unsigned int *classes);
+extern void ata_std_probeinit(struct ata_port *ap);
+extern int ata_std_softreset(struct ata_port *ap, int verbose,
+ unsigned int *classes);
+extern int sata_std_hardreset(struct ata_port *ap, int verbose,
+ unsigned int *class);
+extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes);
extern void ata_port_disable(struct ata_port *);
extern void ata_std_ports(struct ata_ioports *ioaddr);
#ifdef CONFIG_PCI
@@ -521,6 +537,7 @@
extern u8 ata_check_status(struct ata_port *ap);
extern u8 ata_altstatus(struct ata_port *ap);
extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf);
+extern int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes);
extern int ata_port_start (struct ata_port *ap);
extern void ata_port_stop (struct ata_port *ap);
extern void ata_host_stop (struct ata_host_set *host_set);
diff --git a/include/linux/list.h b/include/linux/list.h
index 945daa1..47208bd 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -34,9 +34,11 @@
#define LIST_HEAD(name) \
struct list_head name = LIST_HEAD_INIT(name)
-#define INIT_LIST_HEAD(ptr) do { \
- (ptr)->next = (ptr); (ptr)->prev = (ptr); \
-} while (0)
+static inline void INIT_LIST_HEAD(struct list_head *list)
+{
+ list->next = list;
+ list->prev = list;
+}
/*
* Insert a new entry between two known consecutive entries.
@@ -534,7 +536,11 @@
#define HLIST_HEAD_INIT { .first = NULL }
#define HLIST_HEAD(name) struct hlist_head name = { .first = NULL }
#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL)
-#define INIT_HLIST_NODE(ptr) ((ptr)->next = NULL, (ptr)->pprev = NULL)
+static inline void INIT_HLIST_NODE(struct hlist_node *h)
+{
+ h->next = NULL;
+ h->pprev = NULL;
+}
static inline int hlist_unhashed(const struct hlist_node *h)
{
diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h
index 95c8fea..920766c 100644
--- a/include/linux/lockd/lockd.h
+++ b/include/linux/lockd/lockd.h
@@ -84,6 +84,7 @@
struct nlm_args a_args; /* arguments */
struct nlm_res a_res; /* result */
struct nlm_wait * a_block;
+ unsigned int a_retries; /* Retry count */
char a_owner[NLMCLNT_OHSIZE];
};
@@ -148,7 +149,6 @@
int nlmclnt_prepare_block(struct nlm_rqst *req, struct nlm_host *host, struct file_lock *fl);
void nlmclnt_finish_block(struct nlm_rqst *req);
long nlmclnt_block(struct nlm_rqst *req, long timeout);
-int nlmclnt_cancel(struct nlm_host *, struct file_lock *);
u32 nlmclnt_grant(struct nlm_lock *);
void nlmclnt_recovery(struct nlm_host *, u32);
int nlmclnt_reclaim(struct nlm_host *, struct file_lock *);
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 85854b8..75e9f07 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -303,7 +303,7 @@
*/
#define put_page_testzero(p) \
({ \
- BUG_ON(page_count(p) == 0); \
+ BUG_ON(atomic_read(&(p)->_count) == -1);\
atomic_add_negative(-1, &(p)->_count); \
})
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index ccd3e13..f38872a 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -21,24 +21,35 @@
u32 arg;
u32 resp[4];
unsigned int flags; /* expected response type */
-#define MMC_RSP_NONE (0 << 0)
-#define MMC_RSP_SHORT (1 << 0)
-#define MMC_RSP_LONG (2 << 0)
-#define MMC_RSP_MASK (3 << 0)
-#define MMC_RSP_CRC (1 << 3) /* expect valid crc */
-#define MMC_RSP_BUSY (1 << 4) /* card may send busy */
-#define MMC_RSP_OPCODE (1 << 5) /* response contains opcode */
+#define MMC_RSP_PRESENT (1 << 0)
+#define MMC_RSP_136 (1 << 1) /* 136 bit response */
+#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
+#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
+#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
+#define MMC_CMD_MASK (3 << 5) /* command type */
+#define MMC_CMD_AC (0 << 5)
+#define MMC_CMD_ADTC (1 << 5)
+#define MMC_CMD_BC (2 << 5)
+#define MMC_CMD_BCR (3 << 5)
/*
* These are the response types, and correspond to valid bit
* patterns of the above flags. One additional valid pattern
* is all zeros, which means we don't expect a response.
*/
-#define MMC_RSP_R1 (MMC_RSP_SHORT|MMC_RSP_CRC|MMC_RSP_OPCODE)
-#define MMC_RSP_R1B (MMC_RSP_SHORT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
-#define MMC_RSP_R2 (MMC_RSP_LONG|MMC_RSP_CRC)
-#define MMC_RSP_R3 (MMC_RSP_SHORT)
-#define MMC_RSP_R6 (MMC_RSP_SHORT|MMC_RSP_CRC)
+#define MMC_RSP_NONE (0)
+#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
+#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
+#define MMC_RSP_R3 (MMC_RSP_PRESENT)
+#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC)
+
+#define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
+
+/*
+ * These are the command types.
+ */
+#define mmc_cmd_type(cmd) ((cmd)->flags & MMC_CMD_TYPE)
unsigned int retries; /* max number of retries */
unsigned int error; /* command error */
diff --git a/include/linux/mmc/protocol.h b/include/linux/mmc/protocol.h
index a14dc30..81c3f77 100644
--- a/include/linux/mmc/protocol.h
+++ b/include/linux/mmc/protocol.h
@@ -79,7 +79,7 @@
/* SD commands type argument response */
/* class 8 */
/* This is basically the same command as for MMC with some quirks. */
-#define SD_SEND_RELATIVE_ADDR 3 /* ac R6 */
+#define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */
/* Application commands */
#define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 93a849f..ebfc238 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -91,10 +91,21 @@
* be 8 (2 ** 3) zonelists. GFP_ZONETYPES defines the number of possible
* combinations of zone modifiers in "zone modifier space".
*
+ * As an optimisation any zone modifier bits which are only valid when
+ * no other zone modifier bits are set (loners) should be placed in
+ * the highest order bits of this field. This allows us to reduce the
+ * extent of the zonelists thus saving space. For example in the case
+ * of three zone modifier bits, we could require up to eight zonelists.
+ * If the left most zone modifier is a "loner" then the highest valid
+ * zonelist would be four allowing us to allocate only five zonelists.
+ * Use the first form for GFP_ZONETYPES when the left most bit is not
+ * a "loner", otherwise use the second.
+ *
* NOTE! Make sure this matches the zones in <linux/gfp.h>
*/
#define GFP_ZONEMASK 0x07
-#define GFP_ZONETYPES 5
+/* #define GFP_ZONETYPES (GFP_ZONEMASK + 1) */ /* Non-loner */
+#define GFP_ZONETYPES ((GFP_ZONEMASK + 1) / 2 + 1) /* Loner */
/*
* On machines where it is needed (eg PCs) we divide physical memory
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index fedfbc8..7dfd6e1 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -15,7 +15,6 @@
#include <asm/unaligned.h>
#include <asm/system.h>
#include <asm/io.h>
-#include <asm/bug.h>
#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
#define map_bankwidth(map) 1
diff --git a/include/linux/namespace.h b/include/linux/namespace.h
index 6731977..3abc8e3 100644
--- a/include/linux/namespace.h
+++ b/include/linux/namespace.h
@@ -15,6 +15,7 @@
extern int copy_namespace(int, struct task_struct *);
extern void __put_namespace(struct namespace *namespace);
+extern struct namespace *dup_namespace(struct task_struct *, struct fs_struct *);
static inline void put_namespace(struct namespace *namespace)
{
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index 59ff6c4..6500d4e 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -19,7 +19,21 @@
/* For standard target */
#define XT_RETURN (-NF_REPEAT - 1)
-#define XT_ALIGN(s) (((s) + (__alignof__(u_int64_t)-1)) & ~(__alignof__(u_int64_t)-1))
+/* this is a dummy structure to find out the alignment requirement for a struct
+ * containing all the fundamental data types that are used in ipt_entry,
+ * ip6t_entry and arpt_entry. This sucks, and it is a hack. It will be my
+ * personal pleasure to remove it -HW
+ */
+struct _xt_align
+{
+ u_int8_t u8;
+ u_int16_t u16;
+ u_int32_t u32;
+ u_int64_t u64;
+};
+
+#define XT_ALIGN(s) (((s) + (__alignof__(struct _xt_align)-1)) \
+ & ~(__alignof__(struct _xt_align)-1))
/* Standard return verdict, or do jump. */
#define XT_STANDARD_TARGET ""
diff --git a/include/linux/netfilter_ipv4/ipt_connbytes.h b/include/linux/netfilter_ipv4/ipt_connbytes.h
index b04dfa3..f63e6ee 100644
--- a/include/linux/netfilter_ipv4/ipt_connbytes.h
+++ b/include/linux/netfilter_ipv4/ipt_connbytes.h
@@ -1,10 +1,10 @@
#ifndef _IPT_CONNBYTES_H
#define _IPT_CONNBYTES_H
-#include <net/netfilter/xt_connbytes.h>
+#include <linux/netfilter/xt_connbytes.h>
#define ipt_connbytes_what xt_connbytes_what
-#define IPT_CONNBYTES_PKTS XT_CONNBYTES_PACKETS
+#define IPT_CONNBYTES_PKTS XT_CONNBYTES_PKTS
#define IPT_CONNBYTES_BYTES XT_CONNBYTES_BYTES
#define IPT_CONNBYTES_AVGPKT XT_CONNBYTES_AVGPKT
diff --git a/include/linux/netfilter_ipv4/ipt_policy.h b/include/linux/netfilter_ipv4/ipt_policy.h
index 7fd1bec..a3f6eff 100644
--- a/include/linux/netfilter_ipv4/ipt_policy.h
+++ b/include/linux/netfilter_ipv4/ipt_policy.h
@@ -27,16 +27,22 @@
reqid:1;
};
+union ipt_policy_addr
+{
+ struct in_addr a4;
+ struct in6_addr a6;
+};
+
struct ipt_policy_elem
{
- u_int32_t saddr;
- u_int32_t smask;
- u_int32_t daddr;
- u_int32_t dmask;
- u_int32_t spi;
- u_int32_t reqid;
- u_int8_t proto;
- u_int8_t mode;
+ union ipt_policy_addr saddr;
+ union ipt_policy_addr smask;
+ union ipt_policy_addr daddr;
+ union ipt_policy_addr dmask;
+ u_int32_t spi;
+ u_int32_t reqid;
+ u_int8_t proto;
+ u_int8_t mode;
struct ipt_policy_spec match;
struct ipt_policy_spec invert;
diff --git a/include/linux/netfilter_ipv6/ip6t_policy.h b/include/linux/netfilter_ipv6/ip6t_policy.h
index 5a93afc..671bd81 100644
--- a/include/linux/netfilter_ipv6/ip6t_policy.h
+++ b/include/linux/netfilter_ipv6/ip6t_policy.h
@@ -27,16 +27,22 @@
reqid:1;
};
+union ip6t_policy_addr
+{
+ struct in_addr a4;
+ struct in6_addr a6;
+};
+
struct ip6t_policy_elem
{
- struct in6_addr saddr;
- struct in6_addr smask;
- struct in6_addr daddr;
- struct in6_addr dmask;
- u_int32_t spi;
- u_int32_t reqid;
- u_int8_t proto;
- u_int8_t mode;
+ union ip6t_policy_addr saddr;
+ union ip6t_policy_addr smask;
+ union ip6t_policy_addr daddr;
+ union ip6t_policy_addr dmask;
+ u_int32_t spi;
+ u_int32_t reqid;
+ u_int8_t proto;
+ u_int8_t mode;
struct ip6t_policy_spec match;
struct ip6t_policy_spec invert;
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index 4726ef7..b959a45 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -84,7 +84,6 @@
#include <linux/threads.h>
#include <linux/bitmap.h>
#include <linux/numa.h>
-#include <asm/bug.h>
typedef struct { DECLARE_BITMAP(bits, MAX_NUMNODES); } nodemask_t;
extern nodemask_t _unused_nodemask_arg_;
diff --git a/include/linux/parport.h b/include/linux/parport.h
index f67f838..008d736 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -128,6 +128,11 @@
unsigned char statusdir;/* ciab.ddrb & 7 */
};
+struct ip32_parport_state {
+ unsigned int dcr;
+ unsigned int ecr;
+};
+
struct parport_state {
union {
struct pc_parport_state pc;
@@ -135,6 +140,7 @@
struct ax_parport_state ax;
struct amiga_parport_state amiga;
/* Atari has not state. */
+ struct ip32_parport_state ip32;
void *misc;
} u;
};
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 0a44072..fe1a2b0 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -406,7 +406,6 @@
struct pci_dev *pci_find_slot (unsigned int bus, unsigned int devfn);
int pci_find_capability (struct pci_dev *dev, int cap);
int pci_find_next_capability (struct pci_dev *dev, u8 pos, int cap);
-int pci_find_ext_capability (struct pci_dev *dev, int cap);
struct pci_bus * pci_find_next_bus(const struct pci_bus *from);
struct pci_dev *pci_get_device (unsigned int vendor, unsigned int device, struct pci_dev *from);
@@ -626,7 +625,6 @@
static inline void pci_unregister_driver(struct pci_driver *drv) { }
static inline int pci_find_capability (struct pci_dev *dev, int cap) {return 0; }
static inline int pci_find_next_capability (struct pci_dev *dev, u8 post, int cap) { return 0; }
-static inline int pci_find_ext_capability (struct pci_dev *dev, int cap) {return 0; }
static inline const struct pci_device_id *pci_match_device(const struct pci_device_id *ids, const struct pci_dev *dev) { return NULL; }
/* Power management related routines */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ecc1fc1..7a61ccd 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -394,14 +394,9 @@
#define PCI_DEVICE_ID_NS_SC1100_SMI 0x0511
#define PCI_DEVICE_ID_NS_SC1100_XBUS 0x0515
#define PCI_DEVICE_ID_NS_87410 0xd001
-#define PCI_DEVICE_ID_NS_CS5535_IDE 0x002d
#define PCI_DEVICE_ID_NS_CS5535_HOST_BRIDGE 0x0028
#define PCI_DEVICE_ID_NS_CS5535_ISA_BRIDGE 0x002b
-#define PCI_DEVICE_ID_NS_CS5535_IDE 0x002d
-#define PCI_DEVICE_ID_NS_CS5535_AUDIO 0x002e
-#define PCI_DEVICE_ID_NS_CS5535_USB 0x002f
-#define PCI_DEVICE_ID_NS_CS5535_VIDEO 0x0030
#define PCI_VENDOR_ID_TSENG 0x100c
#define PCI_DEVICE_ID_TSENG_W32P_2 0x3202
@@ -511,8 +506,6 @@
#define PCI_DEVICE_ID_AMD_CS5536_UOC 0x2097
#define PCI_DEVICE_ID_AMD_CS5536_IDE 0x209A
-#define PCI_DEVICE_ID_AMD_CS5536_IDE 0x209A
-
#define PCI_DEVICE_ID_AMD_LX_VIDEO 0x2081
#define PCI_DEVICE_ID_AMD_LX_AES 0x2082
@@ -1677,6 +1670,9 @@
#define PCI_DEVICE_ID_SIIG_2S1P_20x_550 0x2060
#define PCI_DEVICE_ID_SIIG_2S1P_20x_650 0x2061
#define PCI_DEVICE_ID_SIIG_2S1P_20x_850 0x2062
+#define PCI_DEVICE_ID_SIIG_8S_20x_550 0x2080
+#define PCI_DEVICE_ID_SIIG_8S_20x_650 0x2081
+#define PCI_DEVICE_ID_SIIG_8S_20x_850 0x2082
#define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050
#define PCI_VENDOR_ID_RADISYS 0x1331
@@ -1836,6 +1832,7 @@
#define PCI_VENDOR_ID_AFAVLAB 0x14db
#define PCI_DEVICE_ID_AFAVLAB_P028 0x2180
#define PCI_DEVICE_ID_AFAVLAB_P030 0x2182
+#define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150
#define PCI_VENDOR_ID_BROADCOM 0x14e4
#define PCI_DEVICE_ID_TIGON3_5752 0x1600
@@ -2065,6 +2062,7 @@
#define PCI_DEVICE_ID_INTEL_82801EB_5 0x24d5
#define PCI_DEVICE_ID_INTEL_82801EB_6 0x24d6
#define PCI_DEVICE_ID_INTEL_82801EB_11 0x24db
+#define PCI_DEVICE_ID_INTEL_82801EB_13 0x24dd
#define PCI_DEVICE_ID_INTEL_ESB_1 0x25a1
#define PCI_DEVICE_ID_INTEL_ESB_2 0x25a2
#define PCI_DEVICE_ID_INTEL_ESB_4 0x25a4
@@ -2085,6 +2083,8 @@
#define PCI_DEVICE_ID_INTEL_82915GM_IG 0x2592
#define PCI_DEVICE_ID_INTEL_82945G_HB 0x2770
#define PCI_DEVICE_ID_INTEL_82945G_IG 0x2772
+#define PCI_DEVICE_ID_INTEL_82945GM_HB 0x27A0
+#define PCI_DEVICE_ID_INTEL_82945GM_IG 0x27A2
#define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640
#define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641
#define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642
@@ -2104,6 +2104,13 @@
#define PCI_DEVICE_ID_INTEL_ICH7_19 0x27dd
#define PCI_DEVICE_ID_INTEL_ICH7_20 0x27de
#define PCI_DEVICE_ID_INTEL_ICH7_21 0x27df
+#define PCI_DEVICE_ID_INTEL_ICH8_0 0x2810
+#define PCI_DEVICE_ID_INTEL_ICH8_1 0x2811
+#define PCI_DEVICE_ID_INTEL_ICH8_2 0x2812
+#define PCI_DEVICE_ID_INTEL_ICH8_3 0x2814
+#define PCI_DEVICE_ID_INTEL_ICH8_4 0x2815
+#define PCI_DEVICE_ID_INTEL_ICH8_5 0x283e
+#define PCI_DEVICE_ID_INTEL_ICH8_6 0x2850
#define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340
#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575
#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577
@@ -2147,6 +2154,7 @@
#define PCI_DEVICE_ID_INTEL_82443GX_2 0x71a2
#define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601
#define PCI_DEVICE_ID_INTEL_82454GX 0x84c4
+#define PCI_DEVICE_ID_INTEL_82450GX 0x84c5
#define PCI_DEVICE_ID_INTEL_82451NX 0x84ca
#define PCI_DEVICE_ID_INTEL_82454NX 0x84cb
#define PCI_DEVICE_ID_INTEL_84460GX 0x84ea
diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h
index 2c177e4..8a94c71 100644
--- a/include/linux/pktcdvd.h
+++ b/include/linux/pktcdvd.h
@@ -114,7 +114,7 @@
struct packet_settings
{
- __u8 size; /* packet size in (512 byte) sectors */
+ __u32 size; /* packet size in (512 byte) sectors */
__u8 fp; /* fixed packets */
__u8 link_loss; /* the rest is specified
* as per Mt Fuji */
@@ -169,8 +169,8 @@
#if (PAGE_SIZE % CD_FRAMESIZE) != 0
#error "PAGE_SIZE must be a multiple of CD_FRAMESIZE"
#endif
-#define PACKET_MAX_SIZE 32
-#define PAGES_PER_PACKET (PACKET_MAX_SIZE * CD_FRAMESIZE / PAGE_SIZE)
+#define PACKET_MAX_SIZE 128
+#define FRAMES_PER_PAGE (PAGE_SIZE / CD_FRAMESIZE)
#define PACKET_MAX_SECTORS (PACKET_MAX_SIZE * CD_FRAMESIZE >> 9)
enum packet_data_state {
@@ -219,7 +219,7 @@
atomic_t io_errors; /* Number of read/write errors during IO */
struct bio *r_bios[PACKET_MAX_SIZE]; /* bios to use during data gathering */
- struct page *pages[PAGES_PER_PACKET];
+ struct page *pages[PACKET_MAX_SIZE / FRAMES_PER_PAGE];
int cache_valid; /* If non-zero, the data for the zone defined */
/* by the sector variable is completely cached */
diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h
index 54faf52..95572c4 100644
--- a/include/linux/posix-timers.h
+++ b/include/linux/posix-timers.h
@@ -84,7 +84,6 @@
void register_posix_clock(const clockid_t clock_id, struct k_clock *new_clock);
/* error handlers for timer_create, nanosleep and settime */
-int do_posix_clock_notimer_create(struct k_itimer *timer);
int do_posix_clock_nonanosleep(const clockid_t, int flags, struct timespec *,
struct timespec __user *);
int do_posix_clock_nosettime(const clockid_t, struct timespec *tp);
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 4f34d3d..21e5a91 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -190,7 +190,6 @@
*/
#define sb_dquot_ops (NULL)
#define sb_quotactl_ops (NULL)
-#define sync_dquots_dev(dev,type) (NULL)
#define DQUOT_INIT(inode) do { } while(0)
#define DQUOT_DROP(inode) do { } while(0)
#define DQUOT_ALLOC_INODE(inode) (0)
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 981f9aa..b87aefa 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -240,11 +240,14 @@
* This means that all preempt_disable code sequences, including NMI and
* hardware-interrupt handlers, in progress on entry will have completed
* before this primitive returns. However, this does not guarantee that
- * softirq handlers will have completed, since in some kernels
+ * softirq handlers will have completed, since in some kernels, these
+ * handlers can run in process context, and can block.
*
* This primitive provides the guarantees made by the (deprecated)
* synchronize_kernel() API. In contrast, synchronize_rcu() only
* guarantees that rcu_read_lock() sections will have completed.
+ * In "classic RCU", these two guarantees happen to be one and
+ * the same, but can differ in realtime RCU implementations.
*/
#define synchronize_sched() synchronize_rcu()
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
index 7ab2cdb..015297f 100644
--- a/include/linux/reboot.h
+++ b/include/linux/reboot.h
@@ -60,8 +60,7 @@
*/
extern void kernel_restart_prepare(char *cmd);
-extern void kernel_halt_prepare(void);
-extern void kernel_power_off_prepare(void);
+extern void kernel_shutdown_prepare(enum system_states state);
extern void kernel_restart(char *cmd);
extern void kernel_halt(void);
diff --git a/include/linux/reiserfs_acl.h b/include/linux/reiserfs_acl.h
index 0a36050..806ec5b 100644
--- a/include/linux/reiserfs_acl.h
+++ b/include/linux/reiserfs_acl.h
@@ -58,9 +58,13 @@
extern struct reiserfs_xattr_handler posix_acl_access_handler;
#else
-#define reiserfs_get_acl NULL
#define reiserfs_cache_default_acl(inode) 0
+static inline struct posix_acl *reiserfs_get_acl(struct inode *inode, int type)
+{
+ return NULL;
+}
+
static inline int reiserfs_xattr_posix_acl_init(void)
{
return 0;
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
index e276c5b..7d51149 100644
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -1971,22 +1971,6 @@
extern struct address_space_operations reiserfs_address_space_operations;
/* fix_nodes.c */
-#ifdef CONFIG_REISERFS_CHECK
-void *reiserfs_kmalloc(size_t size, gfp_t flags, struct super_block *s);
-void reiserfs_kfree(const void *vp, size_t size, struct super_block *s);
-#else
-static inline void *reiserfs_kmalloc(size_t size, int flags,
- struct super_block *s)
-{
- return kmalloc(size, flags);
-}
-
-static inline void reiserfs_kfree(const void *vp, size_t size,
- struct super_block *s)
-{
- kfree(vp);
-}
-#endif
int fix_nodes(int n_op_mode, struct tree_balance *p_s_tb,
struct item_head *p_s_ins_ih, const void *);
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 3e68592..31b4c0b 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -382,7 +382,6 @@
on-disk FS format */
/* session statistics */
- int s_kmallocs;
int s_disk_reads;
int s_disk_writes;
int s_fix_nodes;
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
index c84354e..87280eb 100644
--- a/include/linux/reiserfs_xattr.h
+++ b/include/linux/reiserfs_xattr.h
@@ -43,8 +43,6 @@
int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs);
int reiserfs_xattr_init(struct super_block *sb, int mount_flags);
int reiserfs_permission(struct inode *inode, int mask, struct nameidata *nd);
-int reiserfs_permission_locked(struct inode *inode, int mask,
- struct nameidata *nd);
int reiserfs_xattr_del(struct inode *, const char *);
int reiserfs_xattr_get(const struct inode *, const char *, void *, size_t);
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index 9d6fbee..d6b9bcd 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -91,7 +91,8 @@
* Called from mm/vmscan.c to handle paging out
*/
int page_referenced(struct page *, int is_locked);
-int try_to_unmap(struct page *);
+int try_to_unmap(struct page *, int ignore_refs);
+void remove_from_swap(struct page *page);
/*
* Called from mm/filemap_xip.c to unmap empty zero page
@@ -111,7 +112,7 @@
#define anon_vma_link(vma) do {} while (0)
#define page_referenced(page,l) TestClearPageReferenced(page)
-#define try_to_unmap(page) SWAP_FAIL
+#define try_to_unmap(page, refs) SWAP_FAIL
#endif /* CONFIG_MMU */
diff --git a/include/linux/security.h b/include/linux/security.h
index ef75365..7cbef48 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -1499,15 +1499,11 @@
static inline int security_inode_alloc (struct inode *inode)
{
- if (unlikely (IS_PRIVATE (inode)))
- return 0;
return security_ops->inode_alloc_security (inode);
}
static inline void security_inode_free (struct inode *inode)
{
- if (unlikely (IS_PRIVATE (inode)))
- return;
security_ops->inode_free_security (inode);
}
@@ -2617,6 +2613,25 @@
return cap_netlink_recv (skb);
}
+static inline struct dentry *securityfs_create_dir(const char *name,
+ struct dentry *parent)
+{
+ return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *securityfs_create_file(const char *name,
+ mode_t mode,
+ struct dentry *parent,
+ void *data,
+ struct file_operations *fops)
+{
+ return ERR_PTR(-ENODEV);
+}
+
+static inline void securityfs_remove(struct dentry *dentry)
+{
+}
+
#endif /* CONFIG_SECURITY */
#ifdef CONFIG_SECURITY_NETWORK
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index cee302a..73b464f 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -26,7 +26,7 @@
unsigned char regshift; /* register shift */
unsigned char iotype; /* UPIO_* */
unsigned char hub6;
- unsigned int flags; /* UPF_* flags */
+ upf_t flags; /* UPF_* flags */
};
/*
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index ec35100..4041122 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -203,6 +203,8 @@
__u32 buf_overrun;
};
+typedef unsigned int __bitwise__ upf_t;
+
struct uart_port {
spinlock_t lock; /* port lock */
unsigned int iobase; /* in/out[bwl] */
@@ -230,36 +232,34 @@
unsigned long sysrq; /* sysrq timeout */
#endif
- unsigned int flags;
+ upf_t flags;
-#define UPF_FOURPORT (1 << 1)
-#define UPF_SAK (1 << 2)
-#define UPF_SPD_MASK (0x1030)
-#define UPF_SPD_HI (0x0010)
-#define UPF_SPD_VHI (0x0020)
-#define UPF_SPD_CUST (0x0030)
-#define UPF_SPD_SHI (0x1000)
-#define UPF_SPD_WARP (0x1010)
-#define UPF_SKIP_TEST (1 << 6)
-#define UPF_AUTO_IRQ (1 << 7)
-#define UPF_HARDPPS_CD (1 << 11)
-#define UPF_LOW_LATENCY (1 << 13)
-#define UPF_BUGGY_UART (1 << 14)
-#define UPF_AUTOPROBE (1 << 15)
-#define UPF_MAGIC_MULTIPLIER (1 << 16)
-#define UPF_BOOT_ONLYMCA (1 << 22)
-#define UPF_CONS_FLOW (1 << 23)
-#define UPF_SHARE_IRQ (1 << 24)
-#define UPF_BOOT_AUTOCONF (1 << 28)
-#define UPF_IOREMAP (1 << 31)
+#define UPF_FOURPORT ((__force upf_t) (1 << 1))
+#define UPF_SAK ((__force upf_t) (1 << 2))
+#define UPF_SPD_MASK ((__force upf_t) (0x1030))
+#define UPF_SPD_HI ((__force upf_t) (0x0010))
+#define UPF_SPD_VHI ((__force upf_t) (0x0020))
+#define UPF_SPD_CUST ((__force upf_t) (0x0030))
+#define UPF_SPD_SHI ((__force upf_t) (0x1000))
+#define UPF_SPD_WARP ((__force upf_t) (0x1010))
+#define UPF_SKIP_TEST ((__force upf_t) (1 << 6))
+#define UPF_AUTO_IRQ ((__force upf_t) (1 << 7))
+#define UPF_HARDPPS_CD ((__force upf_t) (1 << 11))
+#define UPF_LOW_LATENCY ((__force upf_t) (1 << 13))
+#define UPF_BUGGY_UART ((__force upf_t) (1 << 14))
+#define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16))
+#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
+#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
+#define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
+#define UPF_IOREMAP ((__force upf_t) (1 << 31))
-#define UPF_CHANGE_MASK (0x17fff)
-#define UPF_USR_MASK (UPF_SPD_MASK|UPF_LOW_LATENCY)
+#define UPF_CHANGE_MASK ((__force upf_t) (0x17fff))
+#define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
unsigned int mctrl; /* current modem ctrl settings */
unsigned int timeout; /* character-based timeout */
unsigned int type; /* port type */
- struct uart_ops *ops;
+ const struct uart_ops *ops;
unsigned int custom_divisor;
unsigned int line; /* port index */
unsigned long mapbase; /* for ioremap */
@@ -289,6 +289,9 @@
};
#define UART_XMIT_SIZE PAGE_SIZE
+
+typedef unsigned int __bitwise__ uif_t;
+
/*
* This is the state information which is only valid when the port
* is open; it may be freed by the core driver once the device has
@@ -298,17 +301,16 @@
struct uart_info {
struct tty_struct *tty;
struct circ_buf xmit;
- unsigned int flags;
+ uif_t flags;
/*
- * These are the flags that specific to info->flags, and reflect our
- * internal state. They can not be accessed via port->flags. Low
- * level drivers must not change these, but may query them instead.
+ * Definitions for info->flags. These are _private_ to serial_core, and
+ * are specific to this structure. They may be queried by low level drivers.
*/
-#define UIF_CHECK_CD (1 << 25)
-#define UIF_CTS_FLOW (1 << 26)
-#define UIF_NORMAL_ACTIVE (1 << 29)
-#define UIF_INITIALIZED (1 << 31)
+#define UIF_CHECK_CD ((__force uif_t) (1 << 25))
+#define UIF_CTS_FLOW ((__force uif_t) (1 << 26))
+#define UIF_NORMAL_ACTIVE ((__force uif_t) (1 << 29))
+#define UIF_INITIALIZED ((__force uif_t) (1 << 31))
int blocked_open;
@@ -430,7 +432,7 @@
port->sysrq = 0;
}
#endif
- if (info->flags & UPF_SAK)
+ if (port->flags & UPF_SAK)
do_SAK(info->tty);
return 0;
}
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 1fb77a9..8cf5293 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -76,7 +76,14 @@
kmem_cache_t *cs_dmacachep;
};
extern struct cache_sizes malloc_sizes[];
+
+#ifndef CONFIG_DEBUG_SLAB
extern void *__kmalloc(size_t, gfp_t);
+#else
+extern void *__kmalloc_track_caller(size_t, gfp_t, void*);
+#define __kmalloc(size, flags) \
+ __kmalloc_track_caller(size, flags, __builtin_return_address(0))
+#endif
static inline void *kmalloc(size_t size, gfp_t flags)
{
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 9dfa3ee..44153fd 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -17,7 +17,6 @@
#include <linux/compiler.h>
#include <linux/thread_info.h>
#include <asm/smp.h>
-#include <asm/bug.h>
/*
* main cross-CPU interfaces, handles INIT, TLB flush, STOP, etc.
diff --git a/include/linux/sunrpc/auth.h b/include/linux/sunrpc/auth.h
index b68c11a..be4772e 100644
--- a/include/linux/sunrpc/auth.h
+++ b/include/linux/sunrpc/auth.h
@@ -48,7 +48,7 @@
/* per-flavor data */
};
-#define RPCAUTH_CRED_LOCKED 0x0001
+#define RPCAUTH_CRED_NEW 0x0001
#define RPCAUTH_CRED_UPTODATE 0x0002
#define RPCAUTH_CRED_MAGIC 0x0f4aa4f0
@@ -83,9 +83,10 @@
struct rpc_cred_cache * au_credcache;
/* per-flavor data */
};
-#define RPC_AUTH_PROC_CREDS 0x0010 /* process creds (including
- * uid/gid, fs[ug]id, gids)
- */
+
+/* Flags for rpcauth_lookupcred() */
+#define RPCAUTH_LOOKUP_NEW 0x01 /* Accept an uninitialised cred */
+#define RPCAUTH_LOOKUP_ROOTCREDS 0x02 /* This really ought to go! */
/*
* Client authentication ops
@@ -105,6 +106,7 @@
struct rpc_credops {
const char * cr_name; /* Name of the auth flavour */
+ int (*cr_init)(struct rpc_auth *, struct rpc_cred *);
void (*crdestroy)(struct rpc_cred *);
int (*crmatch)(struct auth_cred *, struct rpc_cred *, int);
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 5dc94e7..37c1c76 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -43,16 +43,20 @@
/* kernel/power/swsusp.c */
extern int software_suspend(void);
+#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
extern int pm_prepare_console(void);
extern void pm_restore_console(void);
-
+#else
+static inline int pm_prepare_console(void) { return 0; }
+static inline void pm_restore_console(void) {}
+#endif /* defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) */
#else
static inline int software_suspend(void)
{
printk("Warning: fake suspend called\n");
return -EPERM;
}
-#endif
+#endif /* CONFIG_PM */
#ifdef CONFIG_SUSPEND_SMP
extern void disable_nonboot_cpus(void);
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 4a99e4a..f3e17d5 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -178,6 +178,7 @@
#ifdef CONFIG_NUMA
extern int zone_reclaim_mode;
+extern int zone_reclaim_interval;
extern int zone_reclaim(struct zone *, gfp_t, unsigned int);
#else
#define zone_reclaim_mode 0
@@ -190,13 +191,20 @@
#ifdef CONFIG_MIGRATION
extern int isolate_lru_page(struct page *p);
extern int putback_lru_pages(struct list_head *l);
+extern int migrate_page(struct page *, struct page *);
+extern void migrate_page_copy(struct page *, struct page *);
+extern int migrate_page_remove_references(struct page *, struct page *, int);
extern int migrate_pages(struct list_head *l, struct list_head *t,
struct list_head *moved, struct list_head *failed);
+extern int fail_migrate_page(struct page *, struct page *);
#else
static inline int isolate_lru_page(struct page *p) { return -ENOSYS; }
static inline int putback_lru_pages(struct list_head *l) { return 0; }
static inline int migrate_pages(struct list_head *l, struct list_head *t,
struct list_head *moved, struct list_head *failed) { return -ENOSYS; }
+/* Possible settings for the migrate_page() method in address_operations */
+#define migrate_page NULL
+#define fail_migrate_page NULL
#endif
#ifdef CONFIG_MMU
@@ -245,6 +253,7 @@
struct backing_dev_info;
extern spinlock_t swap_lock;
+extern int remove_vma_swap(struct vm_area_struct *vma, struct page *page);
/* linux/mm/thrash.c */
extern struct mm_struct * swap_token_mm;
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index e666d60..3877209 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -50,6 +50,8 @@
struct tms;
struct utimbuf;
struct mq_attr;
+struct compat_stat;
+struct compat_timeval;
#include <linux/config.h>
#include <linux/types.h>
@@ -534,4 +536,35 @@
asmlinkage long sys_spu_create(const char __user *name,
unsigned int flags, mode_t mode);
+asmlinkage long sys_mknodat(int dfd, const char __user * filename, int mode,
+ unsigned dev);
+asmlinkage long sys_mkdirat(int dfd, const char __user * pathname, int mode);
+asmlinkage long sys_unlinkat(int dfd, const char __user * pathname, int flag);
+asmlinkage long sys_symlinkat(const char __user * oldname,
+ int newdfd, const char __user * newname);
+asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
+ int newdfd, const char __user *newname);
+asmlinkage long sys_renameat(int olddfd, const char __user * oldname,
+ int newdfd, const char __user * newname);
+asmlinkage long sys_futimesat(int dfd, char __user *filename,
+ struct timeval __user *utimes);
+asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode);
+asmlinkage long sys_fchmodat(int dfd, const char __user * filename,
+ mode_t mode);
+asmlinkage long sys_fchownat(int dfd, const char __user *filename, uid_t user,
+ gid_t group, int flag);
+asmlinkage long sys_openat(int dfd, const char __user *filename, int flags,
+ int mode);
+asmlinkage long sys_newfstatat(int dfd, char __user *filename,
+ struct stat __user *statbuf, int flag);
+asmlinkage long sys_readlinkat(int dfd, const char __user *path, char __user *buf,
+ int bufsiz);
+asmlinkage long compat_sys_futimesat(unsigned int dfd, char __user *filename,
+ struct compat_timeval __user *t);
+asmlinkage long compat_sys_newfstatat(unsigned int dfd, char __user * filename,
+ struct compat_stat __user *statbuf,
+ int flag);
+asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename,
+ int flags, int mode);
+
#endif
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 8352a7c..32a4139 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -182,7 +182,8 @@
VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */
VM_DROP_PAGECACHE=29, /* int: nuke lots of pagecache */
VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */
- VM_ZONE_RECLAIM_MODE=31,/* reclaim local zone memory before going off node */
+ VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */
+ VM_ZONE_RECLAIM_INTERVAL=32, /* time period to wait after reclaim failure */
};
diff --git a/include/linux/time.h b/include/linux/time.h
index 614dd84..7b4dc365 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -48,7 +48,7 @@
* Returns true if the timespec is norm, false if denorm:
*/
#define timespec_valid(ts) \
- (((ts)->tv_sec >= 0) && (((unsigned) (ts)->tv_nsec) < NSEC_PER_SEC))
+ (((ts)->tv_sec >= 0) && (((unsigned long) (ts)->tv_nsec) < NSEC_PER_SEC))
/*
* 64-bit nanosec type. Large enough to span 292+ years in nanosecond
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 3787102..a7bd3b4 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -57,6 +57,7 @@
unsigned char *flag_buf_ptr;
int used;
int size;
+ int active;
/* Data points here */
unsigned long data[0];
};
@@ -64,6 +65,7 @@
struct tty_bufhead {
struct work_struct work;
struct semaphore pty_sem;
+ spinlock_t lock;
struct tty_buffer *head; /* Queue head */
struct tty_buffer *tail; /* Active buffer */
struct tty_buffer *free; /* Free queue head */
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index be1400e..82961eb 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -17,7 +17,7 @@
unsigned char ch, char flag)
{
struct tty_buffer *tb = tty->buf.tail;
- if (tb && tb->used < tb->size) {
+ if (tb && tb->active && tb->used < tb->size) {
tb->flag_buf_ptr[tb->used] = flag;
tb->char_buf_ptr[tb->used++] = ch;
return 1;
@@ -27,6 +27,11 @@
_INLINE_ void tty_schedule_flip(struct tty_struct *tty)
{
+ unsigned long flags;
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ if (tty->buf.tail != NULL)
+ tty->buf.tail->active = 0;
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
schedule_delayed_work(&tty->buf.work, 1);
}
diff --git a/include/linux/types.h b/include/linux/types.h
index 21b9ce8..54ae2d5 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -8,6 +8,8 @@
(((bits)+BITS_PER_LONG-1)/BITS_PER_LONG)
#define DECLARE_BITMAP(name,bits) \
unsigned long name[BITS_TO_LONGS(bits)]
+
+#define BITS_PER_BYTE 8
#endif
#include <linux/posix_types.h>
diff --git a/include/linux/ufs_fs.h b/include/linux/ufs_fs.h
index 7a6babe..b0ffe43 100644
--- a/include/linux/ufs_fs.h
+++ b/include/linux/ufs_fs.h
@@ -148,11 +148,11 @@
#define UFS_USEEFT ((__u16)65535)
#define UFS_FSOK 0x7c269d38
-#define UFS_FSACTIVE ((char)0x00)
-#define UFS_FSCLEAN ((char)0x01)
-#define UFS_FSSTABLE ((char)0x02)
-#define UFS_FSOSF1 ((char)0x03) /* is this correct for DEC OSF/1? */
-#define UFS_FSBAD ((char)0xff)
+#define UFS_FSACTIVE ((__s8)0x00)
+#define UFS_FSCLEAN ((__s8)0x01)
+#define UFS_FSSTABLE ((__s8)0x02)
+#define UFS_FSOSF1 ((__s8)0x03) /* is this correct for DEC OSF/1? */
+#define UFS_FSBAD ((__s8)0xff)
/* From here to next blank line, s_flags for ufs_sb_info */
/* directory entry encoding */
@@ -502,8 +502,7 @@
/*
* Convert cylinder group to base address of its global summary info.
*/
-#define fs_cs(indx) \
- s_csp[(indx) >> uspi->s_csshift][(indx) & ~uspi->s_csmask]
+#define fs_cs(indx) s_csp[(indx)]
/*
* Cylinder group block for a file system.
@@ -913,6 +912,7 @@
extern void ufs_delete_inode (struct inode *);
extern struct buffer_head * ufs_getfrag (struct inode *, unsigned, int, int *);
extern struct buffer_head * ufs_bread (struct inode *, unsigned, int, int *);
+extern int ufs_getfrag_block (struct inode *inode, sector_t fragment, struct buffer_head *bh_result, int create);
/* namei.c */
extern struct file_operations ufs_dir_operations;
diff --git a/include/linux/ufs_fs_sb.h b/include/linux/ufs_fs_sb.h
index c1be4c2..8ff13c1 100644
--- a/include/linux/ufs_fs_sb.h
+++ b/include/linux/ufs_fs_sb.h
@@ -25,7 +25,7 @@
struct ufs_sb_info {
struct ufs_sb_private_info * s_uspi;
- struct ufs_csum * s_csp[UFS_MAXCSBUFS];
+ struct ufs_csum * s_csp;
unsigned s_bytesex;
unsigned s_flags;
struct buffer_head ** s_ucg;
diff --git a/include/linux/usb_ch9.h b/include/linux/usb_ch9.h
index ee21e6b..a2aacfc 100644
--- a/include/linux/usb_ch9.h
+++ b/include/linux/usb_ch9.h
@@ -535,9 +535,11 @@
*/
USB_STATE_NOTATTACHED = 0,
- /* the chapter 9 device states */
+ /* chapter 9 and authentication (wireless) device states */
USB_STATE_ATTACHED,
- USB_STATE_POWERED,
+ USB_STATE_POWERED, /* wired */
+ USB_STATE_UNAUTHENTICATED, /* auth */
+ USB_STATE_RECONNECTING, /* auth */
USB_STATE_DEFAULT, /* limited function */
USB_STATE_ADDRESS,
USB_STATE_CONFIGURED, /* most functions */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index ce40675..5208b12d 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -315,6 +315,7 @@
#define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S','9','1','0') /* SN9C10x compression */
#define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P','W','C','1') /* pwc older webcam */
#define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P','W','C','2') /* pwc newer webcam */
+#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E','6','2','5') /* ET61X251 compression */
/*
* F O R M A T E N U M E R A T I O N
@@ -548,7 +549,7 @@
struct v4l2_clip
{
struct v4l2_rect c;
- struct v4l2_clip *next;
+ struct v4l2_clip __user *next;
};
struct v4l2_window
@@ -628,6 +629,7 @@
#define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000)
#define V4L2_STD_NTSC_M_JP ((v4l2_std_id)0x00002000)
#define V4L2_STD_NTSC_443 ((v4l2_std_id)0x00004000)
+#define V4L2_STD_NTSC_M_KR ((v4l2_std_id)0x00008000)
#define V4L2_STD_SECAM_B ((v4l2_std_id)0x00010000)
#define V4L2_STD_SECAM_D ((v4l2_std_id)0x00020000)
@@ -660,7 +662,8 @@
V4L2_STD_PAL_H |\
V4L2_STD_PAL_I)
#define V4L2_STD_NTSC (V4L2_STD_NTSC_M |\
- V4L2_STD_NTSC_M_JP)
+ V4L2_STD_NTSC_M_JP |\
+ V4L2_STD_NTSC_M_KR)
#define V4L2_STD_SECAM_DK (V4L2_STD_SECAM_D |\
V4L2_STD_SECAM_K |\
V4L2_STD_SECAM_K1)
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
index df05f46..9a92aef 100644
--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -803,9 +803,9 @@
#define IEEE80211_24GHZ_MAX_CHANNEL 14
#define IEEE80211_24GHZ_CHANNELS 14
-#define IEEE80211_52GHZ_MIN_CHANNEL 36
+#define IEEE80211_52GHZ_MIN_CHANNEL 34
#define IEEE80211_52GHZ_MAX_CHANNEL 165
-#define IEEE80211_52GHZ_CHANNELS 32
+#define IEEE80211_52GHZ_CHANNELS 131
enum {
IEEE80211_CH_PASSIVE_ONLY = (1 << 0),
diff --git a/include/net/netfilter/nf_conntrack_l3proto.h b/include/net/netfilter/nf_conntrack_l3proto.h
index 67856eb..dac43b1 100644
--- a/include/net/netfilter/nf_conntrack_l3proto.h
+++ b/include/net/netfilter/nf_conntrack_l3proto.h
@@ -88,12 +88,6 @@
extern int nf_conntrack_l3proto_register(struct nf_conntrack_l3proto *proto);
extern void nf_conntrack_l3proto_unregister(struct nf_conntrack_l3proto *proto);
-static inline struct nf_conntrack_l3proto *
-__nf_ct_l3proto_find(u_int16_t l3proto)
-{
- return nf_ct_l3protos[l3proto];
-}
-
extern struct nf_conntrack_l3proto *
nf_ct_l3proto_find_get(u_int16_t l3proto);
@@ -103,4 +97,13 @@
extern struct nf_conntrack_l3proto nf_conntrack_l3proto_ipv4;
extern struct nf_conntrack_l3proto nf_conntrack_l3proto_ipv6;
extern struct nf_conntrack_l3proto nf_conntrack_generic_l3proto;
+
+static inline struct nf_conntrack_l3proto *
+__nf_ct_l3proto_find(u_int16_t l3proto)
+{
+ if (unlikely(l3proto >= AF_MAX))
+ return &nf_conntrack_generic_l3proto;
+ return nf_ct_l3protos[l3proto];
+}
+
#endif /*_NF_CONNTRACK_L3PROTO_H*/
diff --git a/include/net/route.h b/include/net/route.h
index e3e5436..9c04f15 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -170,8 +170,8 @@
return ip_route_output_flow(rp, &fl, sk, 0);
}
-static inline int ip_route_newports(struct rtable **rp, u16 sport, u16 dport,
- struct sock *sk)
+static inline int ip_route_newports(struct rtable **rp, u8 protocol,
+ u16 sport, u16 dport, struct sock *sk)
{
if (sport != (*rp)->fl.fl_ip_sport ||
dport != (*rp)->fl.fl_ip_dport) {
@@ -180,6 +180,7 @@
memcpy(&fl, &(*rp)->fl, sizeof(fl));
fl.fl_ip_sport = sport;
fl.fl_ip_dport = dport;
+ fl.proto = protocol;
ip_rt_put(*rp);
*rp = NULL;
return ip_route_output_flow(rp, &fl, sk, 0);
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 8c522ae..072f407 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -700,7 +700,7 @@
__u8 ecn_ce_done; /* Have we processed the ECN CE bit? */
__u8 pdiscard; /* Discard the whole packet now? */
__u8 tsn_gap_acked; /* Is this chunk acked by a GAP ACK? */
- __u8 fast_retransmit; /* Is this chunk fast retransmitted? */
+ __s8 fast_retransmit; /* Is this chunk fast retransmitted? */
__u8 tsn_missing_report; /* Data chunk missing counter. */
};
diff --git a/include/net/sock.h b/include/net/sock.h
index 1806e5b..3075803 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1354,12 +1354,12 @@
* Enable debug/info messages
*/
-#if 0
-#define NETDEBUG(fmt, args...) do { } while (0)
-#define LIMIT_NETDEBUG(fmt, args...) do { } while(0)
-#else
+#ifdef CONFIG_NETDEBUG
#define NETDEBUG(fmt, args...) printk(fmt,##args)
#define LIMIT_NETDEBUG(fmt, args...) do { if (net_ratelimit()) printk(fmt,##args); } while(0)
+#else
+#define NETDEBUG(fmt, args...) do { } while (0)
+#define LIMIT_NETDEBUG(fmt, args...) do { } while(0)
#endif
/*
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index e94ca4d..290e3b4 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -275,7 +275,7 @@
int data_direction, void *buffer, unsigned bufflen,
struct scsi_sense_hdr *, int timeout, int retries);
extern int scsi_execute_async(struct scsi_device *sdev,
- const unsigned char *cmd, int data_direction,
+ const unsigned char *cmd, int cmd_len, int data_direction,
void *buffer, unsigned bufflen, int use_sg,
int timeout, int retries, void *privdata,
void (*done)(void *, char *, int, int),
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 467274a..8279929 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -554,7 +554,6 @@
/*
* ordered write support
*/
- unsigned ordered_flush:1;
unsigned ordered_tag:1;
/*
diff --git a/init/Kconfig b/init/Kconfig
index b9923b1..38416a1 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -31,19 +31,8 @@
you say Y here, you will be offered the choice of using features or
drivers that are currently considered to be in the alpha-test phase.
-config CLEAN_COMPILE
- bool "Select only drivers expected to compile cleanly" if EXPERIMENTAL
- default y
- help
- Select this option if you don't even want to see the option
- to configure known-broken drivers.
-
- If unsure, say Y
-
config BROKEN
bool
- depends on !CLEAN_COMPILE
- default y
config BROKEN_ON_SMP
bool
@@ -180,7 +169,6 @@
config AUDIT
bool "Auditing support"
depends on NET
- default y if SECURITY_SELINUX
help
Enable auditing infrastructure that can be used with another
kernel subsystem, such as SELinux (which requires this for
diff --git a/kernel/compat.c b/kernel/compat.c
index 1867290..8c9cd88b 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -23,7 +23,6 @@
#include <linux/security.h>
#include <asm/uaccess.h>
-#include <asm/bug.h>
int get_compat_timespec(struct timespec *ts, const struct compat_timespec __user *cts)
{
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index fe2f71f..ba42b0a 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -641,7 +641,7 @@
* task has been modifying its cpuset.
*/
-void cpuset_update_task_memory_state()
+void cpuset_update_task_memory_state(void)
{
int my_cpusets_mem_gen;
struct task_struct *tsk = current;
diff --git a/kernel/fork.c b/kernel/fork.c
index 4ae8cfc..8e88b37 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -446,6 +446,55 @@
}
}
+/*
+ * Allocate a new mm structure and copy contents from the
+ * mm structure of the passed in task structure.
+ */
+static struct mm_struct *dup_mm(struct task_struct *tsk)
+{
+ struct mm_struct *mm, *oldmm = current->mm;
+ int err;
+
+ if (!oldmm)
+ return NULL;
+
+ mm = allocate_mm();
+ if (!mm)
+ goto fail_nomem;
+
+ memcpy(mm, oldmm, sizeof(*mm));
+
+ if (!mm_init(mm))
+ goto fail_nomem;
+
+ if (init_new_context(tsk, mm))
+ goto fail_nocontext;
+
+ err = dup_mmap(mm, oldmm);
+ if (err)
+ goto free_pt;
+
+ mm->hiwater_rss = get_mm_rss(mm);
+ mm->hiwater_vm = mm->total_vm;
+
+ return mm;
+
+free_pt:
+ mmput(mm);
+
+fail_nomem:
+ return NULL;
+
+fail_nocontext:
+ /*
+ * If init_new_context() failed, we cannot use mmput() to free the mm
+ * because it calls destroy_context()
+ */
+ mm_free_pgd(mm);
+ free_mm(mm);
+ return NULL;
+}
+
static int copy_mm(unsigned long clone_flags, struct task_struct * tsk)
{
struct mm_struct * mm, *oldmm;
@@ -473,43 +522,17 @@
}
retval = -ENOMEM;
- mm = allocate_mm();
+ mm = dup_mm(tsk);
if (!mm)
goto fail_nomem;
- /* Copy the current MM stuff.. */
- memcpy(mm, oldmm, sizeof(*mm));
- if (!mm_init(mm))
- goto fail_nomem;
-
- if (init_new_context(tsk,mm))
- goto fail_nocontext;
-
- retval = dup_mmap(mm, oldmm);
- if (retval)
- goto free_pt;
-
- mm->hiwater_rss = get_mm_rss(mm);
- mm->hiwater_vm = mm->total_vm;
-
good_mm:
tsk->mm = mm;
tsk->active_mm = mm;
return 0;
-free_pt:
- mmput(mm);
fail_nomem:
return retval;
-
-fail_nocontext:
- /*
- * If init_new_context() failed, we cannot use mmput() to free the mm
- * because it calls destroy_context()
- */
- mm_free_pgd(mm);
- free_mm(mm);
- return retval;
}
static inline struct fs_struct *__copy_fs_struct(struct fs_struct *old)
@@ -597,32 +620,17 @@
return newf;
}
-static int copy_files(unsigned long clone_flags, struct task_struct * tsk)
+/*
+ * Allocate a new files structure and copy contents from the
+ * passed in files structure.
+ */
+static struct files_struct *dup_fd(struct files_struct *oldf, int *errorp)
{
- struct files_struct *oldf, *newf;
+ struct files_struct *newf;
struct file **old_fds, **new_fds;
- int open_files, size, i, error = 0, expand;
+ int open_files, size, i, expand;
struct fdtable *old_fdt, *new_fdt;
- /*
- * A background process may not have any files ...
- */
- oldf = current->files;
- if (!oldf)
- goto out;
-
- if (clone_flags & CLONE_FILES) {
- atomic_inc(&oldf->count);
- goto out;
- }
-
- /*
- * Note: we may be using current for both targets (See exec.c)
- * This works because we cache current->files (old) as oldf. Don't
- * break this.
- */
- tsk->files = NULL;
- error = -ENOMEM;
newf = alloc_files();
if (!newf)
goto out;
@@ -651,9 +659,9 @@
if (expand) {
spin_unlock(&oldf->file_lock);
spin_lock(&newf->file_lock);
- error = expand_files(newf, open_files-1);
+ *errorp = expand_files(newf, open_files-1);
spin_unlock(&newf->file_lock);
- if (error < 0)
+ if (*errorp < 0)
goto out_release;
new_fdt = files_fdtable(newf);
/*
@@ -702,10 +710,8 @@
memset(&new_fdt->close_on_exec->fds_bits[start], 0, left);
}
- tsk->files = newf;
- error = 0;
out:
- return error;
+ return newf;
out_release:
free_fdset (new_fdt->close_on_exec, new_fdt->max_fdset);
@@ -715,6 +721,40 @@
goto out;
}
+static int copy_files(unsigned long clone_flags, struct task_struct * tsk)
+{
+ struct files_struct *oldf, *newf;
+ int error = 0;
+
+ /*
+ * A background process may not have any files ...
+ */
+ oldf = current->files;
+ if (!oldf)
+ goto out;
+
+ if (clone_flags & CLONE_FILES) {
+ atomic_inc(&oldf->count);
+ goto out;
+ }
+
+ /*
+ * Note: we may be using current for both targets (See exec.c)
+ * This works because we cache current->files (old) as oldf. Don't
+ * break this.
+ */
+ tsk->files = NULL;
+ error = -ENOMEM;
+ newf = dup_fd(oldf, &error);
+ if (!newf)
+ goto out;
+
+ tsk->files = newf;
+ error = 0;
+out:
+ return error;
+}
+
/*
* Helper to unshare the files of the current task.
* We don't want to expose copy_files internals to
@@ -802,7 +842,7 @@
init_sigpending(&sig->shared_pending);
INIT_LIST_HEAD(&sig->posix_timers);
- hrtimer_init(&sig->real_timer, CLOCK_MONOTONIC);
+ hrtimer_init(&sig->real_timer, CLOCK_MONOTONIC, HRTIMER_REL);
sig->it_real_incr.tv64 = 0;
sig->real_timer.function = it_real_fn;
sig->real_timer.data = tsk;
@@ -1323,3 +1363,249 @@
sizeof(struct mm_struct), ARCH_MIN_MMSTRUCT_ALIGN,
SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL, NULL);
}
+
+
+/*
+ * Check constraints on flags passed to the unshare system call and
+ * force unsharing of additional process context as appropriate.
+ */
+static inline void check_unshare_flags(unsigned long *flags_ptr)
+{
+ /*
+ * If unsharing a thread from a thread group, must also
+ * unshare vm.
+ */
+ if (*flags_ptr & CLONE_THREAD)
+ *flags_ptr |= CLONE_VM;
+
+ /*
+ * If unsharing vm, must also unshare signal handlers.
+ */
+ if (*flags_ptr & CLONE_VM)
+ *flags_ptr |= CLONE_SIGHAND;
+
+ /*
+ * If unsharing signal handlers and the task was created
+ * using CLONE_THREAD, then must unshare the thread
+ */
+ if ((*flags_ptr & CLONE_SIGHAND) &&
+ (atomic_read(¤t->signal->count) > 1))
+ *flags_ptr |= CLONE_THREAD;
+
+ /*
+ * If unsharing namespace, must also unshare filesystem information.
+ */
+ if (*flags_ptr & CLONE_NEWNS)
+ *flags_ptr |= CLONE_FS;
+}
+
+/*
+ * Unsharing of tasks created with CLONE_THREAD is not supported yet
+ */
+static int unshare_thread(unsigned long unshare_flags)
+{
+ if (unshare_flags & CLONE_THREAD)
+ return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * Unshare the filesystem structure if it is being shared
+ */
+static int unshare_fs(unsigned long unshare_flags, struct fs_struct **new_fsp)
+{
+ struct fs_struct *fs = current->fs;
+
+ if ((unshare_flags & CLONE_FS) &&
+ (fs && atomic_read(&fs->count) > 1)) {
+ *new_fsp = __copy_fs_struct(current->fs);
+ if (!*new_fsp)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/*
+ * Unshare the namespace structure if it is being shared
+ */
+static int unshare_namespace(unsigned long unshare_flags, struct namespace **new_nsp, struct fs_struct *new_fs)
+{
+ struct namespace *ns = current->namespace;
+
+ if ((unshare_flags & CLONE_NEWNS) &&
+ (ns && atomic_read(&ns->count) > 1)) {
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ *new_nsp = dup_namespace(current, new_fs ? new_fs : current->fs);
+ if (!*new_nsp)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/*
+ * Unsharing of sighand for tasks created with CLONE_SIGHAND is not
+ * supported yet
+ */
+static int unshare_sighand(unsigned long unshare_flags, struct sighand_struct **new_sighp)
+{
+ struct sighand_struct *sigh = current->sighand;
+
+ if ((unshare_flags & CLONE_SIGHAND) &&
+ (sigh && atomic_read(&sigh->count) > 1))
+ return -EINVAL;
+ else
+ return 0;
+}
+
+/*
+ * Unshare vm if it is being shared
+ */
+static int unshare_vm(unsigned long unshare_flags, struct mm_struct **new_mmp)
+{
+ struct mm_struct *mm = current->mm;
+
+ if ((unshare_flags & CLONE_VM) &&
+ (mm && atomic_read(&mm->mm_users) > 1)) {
+ *new_mmp = dup_mm(current);
+ if (!*new_mmp)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/*
+ * Unshare file descriptor table if it is being shared
+ */
+static int unshare_fd(unsigned long unshare_flags, struct files_struct **new_fdp)
+{
+ struct files_struct *fd = current->files;
+ int error = 0;
+
+ if ((unshare_flags & CLONE_FILES) &&
+ (fd && atomic_read(&fd->count) > 1)) {
+ *new_fdp = dup_fd(fd, &error);
+ if (!*new_fdp)
+ return error;
+ }
+
+ return 0;
+}
+
+/*
+ * Unsharing of semundo for tasks created with CLONE_SYSVSEM is not
+ * supported yet
+ */
+static int unshare_semundo(unsigned long unshare_flags, struct sem_undo_list **new_ulistp)
+{
+ if (unshare_flags & CLONE_SYSVSEM)
+ return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * unshare allows a process to 'unshare' part of the process
+ * context which was originally shared using clone. copy_*
+ * functions used by do_fork() cannot be used here directly
+ * because they modify an inactive task_struct that is being
+ * constructed. Here we are modifying the current, active,
+ * task_struct.
+ */
+asmlinkage long sys_unshare(unsigned long unshare_flags)
+{
+ int err = 0;
+ struct fs_struct *fs, *new_fs = NULL;
+ struct namespace *ns, *new_ns = NULL;
+ struct sighand_struct *sigh, *new_sigh = NULL;
+ struct mm_struct *mm, *new_mm = NULL, *active_mm = NULL;
+ struct files_struct *fd, *new_fd = NULL;
+ struct sem_undo_list *new_ulist = NULL;
+
+ check_unshare_flags(&unshare_flags);
+
+ if ((err = unshare_thread(unshare_flags)))
+ goto bad_unshare_out;
+ if ((err = unshare_fs(unshare_flags, &new_fs)))
+ goto bad_unshare_cleanup_thread;
+ if ((err = unshare_namespace(unshare_flags, &new_ns, new_fs)))
+ goto bad_unshare_cleanup_fs;
+ if ((err = unshare_sighand(unshare_flags, &new_sigh)))
+ goto bad_unshare_cleanup_ns;
+ if ((err = unshare_vm(unshare_flags, &new_mm)))
+ goto bad_unshare_cleanup_sigh;
+ if ((err = unshare_fd(unshare_flags, &new_fd)))
+ goto bad_unshare_cleanup_vm;
+ if ((err = unshare_semundo(unshare_flags, &new_ulist)))
+ goto bad_unshare_cleanup_fd;
+
+ if (new_fs || new_ns || new_sigh || new_mm || new_fd || new_ulist) {
+
+ task_lock(current);
+
+ if (new_fs) {
+ fs = current->fs;
+ current->fs = new_fs;
+ new_fs = fs;
+ }
+
+ if (new_ns) {
+ ns = current->namespace;
+ current->namespace = new_ns;
+ new_ns = ns;
+ }
+
+ if (new_sigh) {
+ sigh = current->sighand;
+ current->sighand = new_sigh;
+ new_sigh = sigh;
+ }
+
+ if (new_mm) {
+ mm = current->mm;
+ active_mm = current->active_mm;
+ current->mm = new_mm;
+ current->active_mm = new_mm;
+ activate_mm(active_mm, new_mm);
+ new_mm = mm;
+ }
+
+ if (new_fd) {
+ fd = current->files;
+ current->files = new_fd;
+ new_fd = fd;
+ }
+
+ task_unlock(current);
+ }
+
+bad_unshare_cleanup_fd:
+ if (new_fd)
+ put_files_struct(new_fd);
+
+bad_unshare_cleanup_vm:
+ if (new_mm)
+ mmput(new_mm);
+
+bad_unshare_cleanup_sigh:
+ if (new_sigh)
+ if (atomic_dec_and_test(&new_sigh->count))
+ kmem_cache_free(sighand_cachep, new_sigh);
+
+bad_unshare_cleanup_ns:
+ if (new_ns)
+ put_namespace(new_ns);
+
+bad_unshare_cleanup_fs:
+ if (new_fs)
+ put_fs_struct(new_fs);
+
+bad_unshare_cleanup_thread:
+bad_unshare_out:
+ return err;
+}
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index f1c4155..2b6e175 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -21,6 +21,12 @@
* Credits:
* based on kernel/timer.c
*
+ * Help, testing, suggestions, bugfixes, improvements were
+ * provided by:
+ *
+ * George Anzinger, Andrew Morton, Steven Rostedt, Roman Zippel
+ * et. al.
+ *
* For licencing details see kernel-base/COPYING
*/
@@ -66,6 +72,12 @@
/*
* The timer bases:
+ *
+ * Note: If we want to add new timer bases, we have to skip the two
+ * clock ids captured by the cpu-timers. We do this by holding empty
+ * entries rather than doing math adjustment of the clock ids.
+ * This ensures that we capture erroneous accesses to these clock ids
+ * rather than moving them into the range of valid clock id's.
*/
#define MAX_HRTIMER_BASES 2
@@ -483,29 +495,25 @@
}
/**
- * hrtimer_rebase - rebase an initialized hrtimer to a different base
- *
- * @timer: the timer to be rebased
- * @clock_id: the clock to be used
- */
-void hrtimer_rebase(struct hrtimer *timer, const clockid_t clock_id)
-{
- struct hrtimer_base *bases;
-
- bases = per_cpu(hrtimer_bases, raw_smp_processor_id());
- timer->base = &bases[clock_id];
-}
-
-/**
* hrtimer_init - initialize a timer to the given clock
*
* @timer: the timer to be initialized
* @clock_id: the clock to be used
+ * @mode: timer mode abs/rel
*/
-void hrtimer_init(struct hrtimer *timer, const clockid_t clock_id)
+void hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
+ enum hrtimer_mode mode)
{
+ struct hrtimer_base *bases;
+
memset(timer, 0, sizeof(struct hrtimer));
- hrtimer_rebase(timer, clock_id);
+
+ bases = per_cpu(hrtimer_bases, raw_smp_processor_id());
+
+ if (clock_id == CLOCK_REALTIME && mode != HRTIMER_ABS)
+ clock_id = CLOCK_MONOTONIC;
+
+ timer->base = &bases[clock_id];
}
/**
@@ -550,6 +558,7 @@
fn = timer->function;
data = timer->data;
set_curr_timer(base, timer);
+ timer->state = HRTIMER_RUNNING;
__remove_hrtimer(timer, base);
spin_unlock_irq(&base->lock);
@@ -565,6 +574,10 @@
spin_lock_irq(&base->lock);
+ /* Another CPU has added back the timer */
+ if (timer->state != HRTIMER_RUNNING)
+ continue;
+
if (restart == HRTIMER_RESTART)
enqueue_hrtimer(timer, base);
else
@@ -638,8 +651,7 @@
return schedule_hrtimer(timer, mode);
}
-static long __sched
-nanosleep_restart(struct restart_block *restart, clockid_t clockid)
+static long __sched nanosleep_restart(struct restart_block *restart)
{
struct timespec __user *rmtp;
struct timespec tu;
@@ -649,7 +661,7 @@
restart->fn = do_no_restart_syscall;
- hrtimer_init(&timer, clockid);
+ hrtimer_init(&timer, (clockid_t) restart->arg3, HRTIMER_ABS);
timer.expires.tv64 = ((u64)restart->arg1 << 32) | (u64) restart->arg0;
@@ -669,16 +681,6 @@
return -ERESTART_RESTARTBLOCK;
}
-static long __sched nanosleep_restart_mono(struct restart_block *restart)
-{
- return nanosleep_restart(restart, CLOCK_MONOTONIC);
-}
-
-static long __sched nanosleep_restart_real(struct restart_block *restart)
-{
- return nanosleep_restart(restart, CLOCK_REALTIME);
-}
-
long hrtimer_nanosleep(struct timespec *rqtp, struct timespec __user *rmtp,
const enum hrtimer_mode mode, const clockid_t clockid)
{
@@ -687,7 +689,7 @@
struct timespec tu;
ktime_t rem;
- hrtimer_init(&timer, clockid);
+ hrtimer_init(&timer, clockid, mode);
timer.expires = timespec_to_ktime(*rqtp);
@@ -695,7 +697,7 @@
if (rem.tv64 <= 0)
return 0;
- /* Absolute timers do not update the rmtp value: */
+ /* Absolute timers do not update the rmtp value and restart: */
if (mode == HRTIMER_ABS)
return -ERESTARTNOHAND;
@@ -705,11 +707,11 @@
return -EFAULT;
restart = ¤t_thread_info()->restart_block;
- restart->fn = (clockid == CLOCK_MONOTONIC) ?
- nanosleep_restart_mono : nanosleep_restart_real;
+ restart->fn = nanosleep_restart;
restart->arg0 = timer.expires.tv64 & 0xFFFFFFFF;
restart->arg1 = timer.expires.tv64 >> 32;
restart->arg2 = (unsigned long) rmtp;
+ restart->arg3 = (unsigned long) timer.base->index;
return -ERESTART_RESTARTBLOCK;
}
@@ -736,10 +738,8 @@
struct hrtimer_base *base = per_cpu(hrtimer_bases, cpu);
int i;
- for (i = 0; i < MAX_HRTIMER_BASES; i++) {
+ for (i = 0; i < MAX_HRTIMER_BASES; i++, base++)
spin_lock_init(&base->lock);
- base++;
- }
}
#ifdef CONFIG_HOTPLUG_CPU
diff --git a/kernel/intermodule.c b/kernel/intermodule.c
index 0cbe633..55b1e5b 100644
--- a/kernel/intermodule.c
+++ b/kernel/intermodule.c
@@ -179,3 +179,6 @@
EXPORT_SYMBOL(inter_module_unregister);
EXPORT_SYMBOL(inter_module_get_request);
EXPORT_SYMBOL(inter_module_put);
+
+MODULE_LICENSE("GPL");
+
diff --git a/kernel/itimer.c b/kernel/itimer.c
index c2c05c4..379be2f 100644
--- a/kernel/itimer.c
+++ b/kernel/itimer.c
@@ -49,9 +49,11 @@
switch (which) {
case ITIMER_REAL:
+ spin_lock_irq(&tsk->sighand->siglock);
value->it_value = itimer_get_remtime(&tsk->signal->real_timer);
value->it_interval =
ktime_to_timeval(tsk->signal->it_real_incr);
+ spin_unlock_irq(&tsk->sighand->siglock);
break;
case ITIMER_VIRTUAL:
read_lock(&tasklist_lock);
@@ -150,18 +152,25 @@
switch (which) {
case ITIMER_REAL:
+again:
+ spin_lock_irq(&tsk->sighand->siglock);
timer = &tsk->signal->real_timer;
- hrtimer_cancel(timer);
if (ovalue) {
ovalue->it_value = itimer_get_remtime(timer);
ovalue->it_interval
= ktime_to_timeval(tsk->signal->it_real_incr);
}
+ /* We are sharing ->siglock with it_real_fn() */
+ if (hrtimer_try_to_cancel(timer) < 0) {
+ spin_unlock_irq(&tsk->sighand->siglock);
+ goto again;
+ }
tsk->signal->it_real_incr =
timeval_to_ktime(value->it_interval);
expires = timeval_to_ktime(value->it_value);
if (expires.tv64 != 0)
hrtimer_start(timer, expires, HRTIMER_REL);
+ spin_unlock_irq(&tsk->sighand->siglock);
break;
case ITIMER_VIRTUAL:
nval = timeval_to_cputime(&value->it_value);
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 3ea6325..fef1af8 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -344,23 +344,6 @@
spin_unlock_irqrestore(&kretprobe_lock, flags);
}
-/*
- * This kprobe pre_handler is registered with every kretprobe. When probe
- * hits it will set up the return probe.
- */
-static int __kprobes pre_handler_kretprobe(struct kprobe *p,
- struct pt_regs *regs)
-{
- struct kretprobe *rp = container_of(p, struct kretprobe, kp);
- unsigned long flags = 0;
-
- /*TODO: consider to only swap the RA after the last pre_handler fired */
- spin_lock_irqsave(&kretprobe_lock, flags);
- arch_prepare_kretprobe(rp, regs);
- spin_unlock_irqrestore(&kretprobe_lock, flags);
- return 0;
-}
-
static inline void free_rp_inst(struct kretprobe *rp)
{
struct kretprobe_instance *ri;
@@ -578,6 +561,23 @@
#ifdef ARCH_SUPPORTS_KRETPROBES
+/*
+ * This kprobe pre_handler is registered with every kretprobe. When probe
+ * hits it will set up the return probe.
+ */
+static int __kprobes pre_handler_kretprobe(struct kprobe *p,
+ struct pt_regs *regs)
+{
+ struct kretprobe *rp = container_of(p, struct kretprobe, kp);
+ unsigned long flags = 0;
+
+ /*TODO: consider to only swap the RA after the last pre_handler fired */
+ spin_lock_irqsave(&kretprobe_lock, flags);
+ arch_prepare_kretprobe(rp, regs);
+ spin_unlock_irqrestore(&kretprobe_lock, flags);
+ return 0;
+}
+
int __kprobes register_kretprobe(struct kretprobe *rp)
{
int ret = 0;
@@ -631,12 +631,12 @@
unregister_kprobe(&rp->kp);
/* No race here */
spin_lock_irqsave(&kretprobe_lock, flags);
- free_rp_inst(rp);
while ((ri = get_used_rp_inst(rp)) != NULL) {
ri->rp = NULL;
hlist_del(&ri->uflist);
}
spin_unlock_irqrestore(&kretprobe_lock, flags);
+ free_rp_inst(rp);
}
static int __init init_kprobes(void)
diff --git a/kernel/module.c b/kernel/module.c
index 618ed6e..5aad477 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1670,6 +1670,9 @@
goto free_mod;
}
+ /* Userspace could have altered the string after the strlen_user() */
+ args[arglen - 1] = '\0';
+
if (find_module(mod->name)) {
err = -EEXIST;
goto free_mod;
@@ -2092,7 +2095,8 @@
unsigned int i;
for (i = 0; i < mod->num_symtab; i++)
- if (strcmp(name, mod->strtab+mod->symtab[i].st_name) == 0)
+ if (strcmp(name, mod->strtab+mod->symtab[i].st_name) == 0 &&
+ mod->symtab[i].st_info != 'U')
return mod->symtab[i].st_value;
return 0;
}
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 197208b..216f574 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -194,9 +194,7 @@
static int common_timer_create(struct k_itimer *new_timer)
{
- hrtimer_init(&new_timer->it.real.timer, new_timer->it_clock);
- new_timer->it.real.timer.data = new_timer;
- new_timer->it.real.timer.function = posix_timer_fn;
+ hrtimer_init(&new_timer->it.real.timer, new_timer->it_clock, 0);
return 0;
}
@@ -290,7 +288,8 @@
info->si_overrun = timr->it_overrun_last;
}
- unlock_timer(timr, flags);
+ if (timr)
+ unlock_timer(timr, flags);
}
int posix_timer_event(struct k_itimer *timr,int si_private)
@@ -692,6 +691,7 @@
struct itimerspec *new_setting, struct itimerspec *old_setting)
{
struct hrtimer *timer = &timr->it.real.timer;
+ enum hrtimer_mode mode;
if (old_setting)
common_timer_get(timr, old_setting);
@@ -713,14 +713,10 @@
if (!new_setting->it_value.tv_sec && !new_setting->it_value.tv_nsec)
return 0;
- /* Posix madness. Only absolute CLOCK_REALTIME timers
- * are affected by clock sets. So we must reiniatilize
- * the timer.
- */
- if (timr->it_clock == CLOCK_REALTIME && (flags & TIMER_ABSTIME))
- hrtimer_rebase(timer, CLOCK_REALTIME);
- else
- hrtimer_rebase(timer, CLOCK_MONOTONIC);
+ mode = flags & TIMER_ABSTIME ? HRTIMER_ABS : HRTIMER_REL;
+ hrtimer_init(&timr->it.real.timer, timr->it_clock, mode);
+ timr->it.real.timer.data = timr;
+ timr->it.real.timer.function = posix_timer_fn;
timer->expires = timespec_to_ktime(new_setting->it_value);
@@ -728,11 +724,15 @@
timr->it.real.interval = timespec_to_ktime(new_setting->it_interval);
/* SIGEV_NONE timers are not queued ! See common_timer_get */
- if (((timr->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE))
+ if (((timr->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE)) {
+ /* Setup correct expiry time for relative timers */
+ if (mode == HRTIMER_REL)
+ timer->expires = ktime_add(timer->expires,
+ timer->base->get_time());
return 0;
+ }
- hrtimer_start(timer, timer->expires, (flags & TIMER_ABSTIME) ?
- HRTIMER_ABS : HRTIMER_REL);
+ hrtimer_start(timer, timer->expires, mode);
return 0;
}
@@ -875,12 +875,6 @@
}
EXPORT_SYMBOL_GPL(do_posix_clock_nosettime);
-int do_posix_clock_notimer_create(struct k_itimer *timer)
-{
- return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(do_posix_clock_notimer_create);
-
int do_posix_clock_nonanosleep(const clockid_t clock, int flags,
struct timespec *t, struct timespec __user *r)
{
@@ -947,21 +941,8 @@
static int common_nsleep(const clockid_t which_clock, int flags,
struct timespec *tsave, struct timespec __user *rmtp)
{
- int mode = flags & TIMER_ABSTIME ? HRTIMER_ABS : HRTIMER_REL;
- int clockid = which_clock;
-
- switch (which_clock) {
- case CLOCK_REALTIME:
- /* Posix madness. Only absolute timers on clock realtime
- are affected by clock set. */
- if (mode != HRTIMER_ABS)
- clockid = CLOCK_MONOTONIC;
- case CLOCK_MONOTONIC:
- break;
- default:
- return -EINVAL;
- }
- return hrtimer_nanosleep(tsave, rmtp, mode, clockid);
+ return hrtimer_nanosleep(tsave, rmtp, flags & TIMER_ABSTIME ?
+ HRTIMER_ABS : HRTIMER_REL, which_clock);
}
asmlinkage long
diff --git a/kernel/power/console.c b/kernel/power/console.c
index 7ff375e..623786d 100644
--- a/kernel/power/console.c
+++ b/kernel/power/console.c
@@ -9,18 +9,13 @@
#include <linux/console.h>
#include "power.h"
-static int new_loglevel = 10;
-static int orig_loglevel;
-#ifdef SUSPEND_CONSOLE
+#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
+#define SUSPEND_CONSOLE (MAX_NR_CONSOLES-1)
+
static int orig_fgconsole, orig_kmsg;
-#endif
int pm_prepare_console(void)
{
- orig_loglevel = console_loglevel;
- console_loglevel = new_loglevel;
-
-#ifdef SUSPEND_CONSOLE
acquire_console_sem();
orig_fgconsole = fg_console;
@@ -41,18 +36,15 @@
}
orig_kmsg = kmsg_redirect;
kmsg_redirect = SUSPEND_CONSOLE;
-#endif
return 0;
}
void pm_restore_console(void)
{
- console_loglevel = orig_loglevel;
-#ifdef SUSPEND_CONSOLE
acquire_console_sem();
set_console(orig_fgconsole);
release_console_sem();
kmsg_redirect = orig_kmsg;
-#endif
return;
}
+#endif
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index e24446f..0b43847 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -53,7 +53,7 @@
switch(mode) {
case PM_DISK_PLATFORM:
- kernel_power_off_prepare();
+ kernel_shutdown_prepare(SYSTEM_SUSPEND_DISK);
error = pm_ops->enter(PM_SUSPEND_DISK);
break;
case PM_DISK_SHUTDOWN:
@@ -95,13 +95,6 @@
goto thaw;
}
- if (pm_disk_mode == PM_DISK_PLATFORM) {
- if (pm_ops && pm_ops->prepare) {
- if ((error = pm_ops->prepare(PM_SUSPEND_DISK)))
- goto thaw;
- }
- }
-
/* Free memory before shutting down devices. */
if (!(error = swsusp_shrink_memory()))
return 0;
@@ -367,14 +360,14 @@
static ssize_t image_size_show(struct subsystem * subsys, char *buf)
{
- return sprintf(buf, "%u\n", image_size);
+ return sprintf(buf, "%lu\n", image_size);
}
static ssize_t image_size_store(struct subsystem * subsys, const char * buf, size_t n)
{
- unsigned int size;
+ unsigned long size;
- if (sscanf(buf, "%u", &size) == 1) {
+ if (sscanf(buf, "%lu", &size) == 1) {
image_size = size;
return n;
}
diff --git a/kernel/power/main.c b/kernel/power/main.c
index d253f3a..9cb235c 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -133,10 +133,10 @@
static void suspend_finish(suspend_state_t state)
{
device_resume();
- if (pm_ops && pm_ops->finish)
- pm_ops->finish(state);
thaw_processes();
enable_nonboot_cpus();
+ if (pm_ops && pm_ops->finish)
+ pm_ops->finish(state);
pm_restore_console();
}
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 7e8492f..388dba6 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -1,14 +1,6 @@
#include <linux/suspend.h>
#include <linux/utsname.h>
-/* With SUSPEND_CONSOLE defined suspend looks *really* cool, but
- we probably do not take enough locks for switching consoles, etc,
- so bad things might happen.
-*/
-#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
-#define SUSPEND_CONSOLE (MAX_NR_CONSOLES-1)
-#endif
-
struct swsusp_info {
struct new_utsname uts;
u32 version_code;
@@ -42,17 +34,14 @@
extern struct subsystem power_subsys;
-extern int pm_prepare_console(void);
-extern void pm_restore_console(void);
-
/* References to section boundaries */
extern const void __nosave_begin, __nosave_end;
extern unsigned int nr_copy_pages;
extern struct pbe *pagedir_nosave;
-/* Preferred image size in MB (default 500) */
-extern unsigned int image_size;
+/* Preferred image size in bytes (default 500 MB) */
+extern unsigned long image_size;
extern asmlinkage int swsusp_arch_suspend(void);
extern asmlinkage int swsusp_arch_resume(void);
diff --git a/kernel/power/swsusp.c b/kernel/power/swsusp.c
index 55a18d2..4e90905 100644
--- a/kernel/power/swsusp.c
+++ b/kernel/power/swsusp.c
@@ -70,12 +70,12 @@
#include "power.h"
/*
- * Preferred image size in MB (tunable via /sys/power/image_size).
+ * Preferred image size in bytes (tunable via /sys/power/image_size).
* When it is set to N, swsusp will do its best to ensure the image
- * size will not exceed N MB, but if that is impossible, it will
+ * size will not exceed N bytes, but if that is impossible, it will
* try to create the smallest image possible.
*/
-unsigned int image_size = 500;
+unsigned long image_size = 500 * 1024 * 1024;
#ifdef CONFIG_HIGHMEM
unsigned int count_highmem_pages(void);
@@ -590,7 +590,7 @@
if (!tmp)
return -ENOMEM;
pages += tmp;
- } else if (size > (image_size * 1024 * 1024) / PAGE_SIZE) {
+ } else if (size > image_size / PAGE_SIZE) {
tmp = shrink_all_memory(SHRINK_BITE);
pages += tmp;
}
@@ -743,7 +743,6 @@
if (!bio)
return -ENOMEM;
bio->bi_sector = page_off * (PAGE_SIZE >> 9);
- bio_get(bio);
bio->bi_bdev = resume_bdev;
bio->bi_end_io = end_io;
@@ -753,14 +752,13 @@
goto Done;
}
- if (rw == WRITE)
- bio_set_pages_dirty(bio);
atomic_set(&io_done, 1);
submit_bio(rw | (1 << BIO_RW_SYNC), bio);
while (atomic_read(&io_done))
yield();
-
+ if (rw == READ)
+ bio_set_pages_dirty(bio);
Done:
bio_put(bio);
return error;
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index 7732199..7712912 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -114,16 +114,16 @@
{
struct list_head *p;
- spin_lock(&rcu_torture_lock);
+ spin_lock_bh(&rcu_torture_lock);
if (list_empty(&rcu_torture_freelist)) {
atomic_inc(&n_rcu_torture_alloc_fail);
- spin_unlock(&rcu_torture_lock);
+ spin_unlock_bh(&rcu_torture_lock);
return NULL;
}
atomic_inc(&n_rcu_torture_alloc);
p = rcu_torture_freelist.next;
list_del_init(p);
- spin_unlock(&rcu_torture_lock);
+ spin_unlock_bh(&rcu_torture_lock);
return container_of(p, struct rcu_torture, rtort_free);
}
@@ -134,9 +134,9 @@
rcu_torture_free(struct rcu_torture *p)
{
atomic_inc(&n_rcu_torture_free);
- spin_lock(&rcu_torture_lock);
+ spin_lock_bh(&rcu_torture_lock);
list_add_tail(&p->rtort_free, &rcu_torture_freelist);
- spin_unlock(&rcu_torture_lock);
+ spin_unlock_bh(&rcu_torture_lock);
}
static void
diff --git a/kernel/sched.c b/kernel/sched.c
index 3ee2ae4..bc38804 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4031,7 +4031,7 @@
goto out_unlock;
retval = 0;
- cpus_and(*mask, p->cpus_allowed, cpu_possible_map);
+ cpus_and(*mask, p->cpus_allowed, cpu_online_map);
out_unlock:
read_unlock(&tasklist_lock);
@@ -5141,7 +5141,7 @@
#define SEARCH_SCOPE 2
#define MIN_CACHE_SIZE (64*1024U)
#define DEFAULT_CACHE_SIZE (5*1024*1024U)
-#define ITERATIONS 2
+#define ITERATIONS 1
#define SIZE_THRESH 130
#define COST_THRESH 130
@@ -5480,9 +5480,9 @@
break;
}
/*
- * Increase the cachesize in 5% steps:
+ * Increase the cachesize in 10% steps:
*/
- size = size * 20 / 19;
+ size = size * 10 / 9;
}
if (migration_debug)
@@ -5551,13 +5551,15 @@
-1
#endif
);
- printk("migration_cost=");
- for (distance = 0; distance <= max_distance; distance++) {
- if (distance)
- printk(",");
- printk("%ld", (long)migration_cost[distance] / 1000);
+ if (system_state == SYSTEM_BOOTING) {
+ printk("migration_cost=");
+ for (distance = 0; distance <= max_distance; distance++) {
+ if (distance)
+ printk(",");
+ printk("%ld", (long)migration_cost[distance] / 1000);
+ }
+ printk("\n");
}
- printk("\n");
j1 = jiffies;
if (migration_debug)
printk("migration: %ld seconds\n", (j1-j0)/HZ);
@@ -6109,7 +6111,7 @@
runqueue_t *rq;
int i, j, k;
- for (i = 0; i < NR_CPUS; i++) {
+ for_each_cpu(i) {
prio_array_t *array;
rq = cpu_rq(i);
diff --git a/kernel/signal.c b/kernel/signal.c
index d3efafd..b373fc2 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -283,7 +283,7 @@
return(q);
}
-static inline void __sigqueue_free(struct sigqueue *q)
+static void __sigqueue_free(struct sigqueue *q)
{
if (q->flags & SIGQUEUE_PREALLOC)
return;
diff --git a/kernel/sys.c b/kernel/sys.c
index d09cac2..f91218a 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -428,7 +428,7 @@
{
#ifdef CONFIG_KEXEC
struct kimage *image;
- image = xchg(&kexec_image, 0);
+ image = xchg(&kexec_image, NULL);
if (!image) {
return;
}
@@ -440,23 +440,25 @@
}
EXPORT_SYMBOL_GPL(kernel_kexec);
+void kernel_shutdown_prepare(enum system_states state)
+{
+ notifier_call_chain(&reboot_notifier_list,
+ (state == SYSTEM_HALT)?SYS_HALT:SYS_POWER_OFF, NULL);
+ system_state = state;
+ device_shutdown();
+}
/**
* kernel_halt - halt the system
*
* Shutdown everything and perform a clean system halt.
*/
-void kernel_halt_prepare(void)
-{
- notifier_call_chain(&reboot_notifier_list, SYS_HALT, NULL);
- system_state = SYSTEM_HALT;
- device_shutdown();
-}
void kernel_halt(void)
{
- kernel_halt_prepare();
+ kernel_shutdown_prepare(SYSTEM_HALT);
printk(KERN_EMERG "System halted.\n");
machine_halt();
}
+
EXPORT_SYMBOL_GPL(kernel_halt);
/**
@@ -464,20 +466,13 @@
*
* Shutdown everything and perform a clean system power_off.
*/
-void kernel_power_off_prepare(void)
-{
- notifier_call_chain(&reboot_notifier_list, SYS_POWER_OFF, NULL);
- system_state = SYSTEM_POWER_OFF;
- device_shutdown();
-}
void kernel_power_off(void)
{
- kernel_power_off_prepare();
+ kernel_shutdown_prepare(SYSTEM_POWER_OFF);
printk(KERN_EMERG "Power down.\n");
machine_power_off();
}
EXPORT_SYMBOL_GPL(kernel_power_off);
-
/*
* Reboot system call: for obvious reasons only root may call it,
* and even root needs to set up some magic numbers in the registers
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index cb99a42..71dd6f6 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -878,7 +878,17 @@
.maxlen = sizeof(zone_reclaim_mode),
.mode = 0644,
.proc_handler = &proc_dointvec,
- .strategy = &zero,
+ .strategy = &sysctl_intvec,
+ .extra1 = &zero,
+ },
+ {
+ .ctl_name = VM_ZONE_RECLAIM_INTERVAL,
+ .procname = "zone_reclaim_interval",
+ .data = &zone_reclaim_interval,
+ .maxlen = sizeof(zone_reclaim_interval),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_jiffies,
+ .strategy = &sysctl_jiffies,
},
#endif
{ .ctl_name = 0 }
diff --git a/kernel/time.c b/kernel/time.c
index 7477b1d..8045391 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -155,7 +155,7 @@
static int firsttime = 1;
int error = 0;
- if (!timespec_valid(tv))
+ if (tv && !timespec_valid(tv))
return -EINVAL;
error = security_settime(tv, tz);
@@ -637,15 +637,16 @@
*
* Returns the timespec representation of the nsec parameter.
*/
-inline struct timespec ns_to_timespec(const nsec_t nsec)
+struct timespec ns_to_timespec(const nsec_t nsec)
{
struct timespec ts;
- if (nsec)
- ts.tv_sec = div_long_long_rem_signed(nsec, NSEC_PER_SEC,
- &ts.tv_nsec);
- else
- ts.tv_sec = ts.tv_nsec = 0;
+ if (!nsec)
+ return (struct timespec) {0, 0};
+
+ ts.tv_sec = div_long_long_rem_signed(nsec, NSEC_PER_SEC, &ts.tv_nsec);
+ if (unlikely(nsec < 0))
+ set_normalized_timespec(&ts, ts.tv_sec, ts.tv_nsec);
return ts;
}
diff --git a/kernel/timer.c b/kernel/timer.c
index 4f1cb0a..b9dad39 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -495,7 +495,7 @@
base = &__get_cpu_var(tvec_bases);
spin_lock(&base->t_base.lock);
expires = base->timer_jiffies + (LONG_MAX >> 1);
- list = 0;
+ list = NULL;
/* Look for timer events in tv1. */
j = base->timer_jiffies & TVR_MASK;
diff --git a/kernel/user.c b/kernel/user.c
index 89e562f..d9deae4 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/key.h>
+#include <linux/interrupt.h>
/*
* UID task count cache, to get fast user lookup in "alloc_uid"
@@ -27,6 +28,16 @@
static kmem_cache_t *uid_cachep;
static struct list_head uidhash_table[UIDHASH_SZ];
+
+/*
+ * The uidhash_lock is mostly taken from process context, but it is
+ * occasionally also taken from softirq/tasklet context, when
+ * task-structs get RCU-freed. Hence all locking must be softirq-safe.
+ * But free_uid() is also called with local interrupts disabled, and running
+ * local_bh_enable() with local interrupts disabled is an error - we'll run
+ * softirq callbacks, and they can unconditionally enable interrupts, and
+ * the caller of free_uid() didn't expect that..
+ */
static DEFINE_SPINLOCK(uidhash_lock);
struct user_struct root_user = {
@@ -82,15 +93,19 @@
struct user_struct *find_user(uid_t uid)
{
struct user_struct *ret;
+ unsigned long flags;
- spin_lock(&uidhash_lock);
+ spin_lock_irqsave(&uidhash_lock, flags);
ret = uid_hash_find(uid, uidhashentry(uid));
- spin_unlock(&uidhash_lock);
+ spin_unlock_irqrestore(&uidhash_lock, flags);
return ret;
}
void free_uid(struct user_struct *up)
{
+ unsigned long flags;
+
+ local_irq_save(flags);
if (up && atomic_dec_and_lock(&up->__count, &uidhash_lock)) {
uid_hash_remove(up);
key_put(up->uid_keyring);
@@ -98,6 +113,7 @@
kmem_cache_free(uid_cachep, up);
spin_unlock(&uidhash_lock);
}
+ local_irq_restore(flags);
}
struct user_struct * alloc_uid(uid_t uid)
@@ -105,9 +121,9 @@
struct list_head *hashent = uidhashentry(uid);
struct user_struct *up;
- spin_lock(&uidhash_lock);
+ spin_lock_irq(&uidhash_lock);
up = uid_hash_find(uid, hashent);
- spin_unlock(&uidhash_lock);
+ spin_unlock_irq(&uidhash_lock);
if (!up) {
struct user_struct *new;
@@ -137,7 +153,7 @@
* Before adding this, check whether we raced
* on adding the same user already..
*/
- spin_lock(&uidhash_lock);
+ spin_lock_irq(&uidhash_lock);
up = uid_hash_find(uid, hashent);
if (up) {
key_put(new->uid_keyring);
@@ -147,7 +163,7 @@
uid_hash_insert(new, hashent);
up = new;
}
- spin_unlock(&uidhash_lock);
+ spin_unlock_irq(&uidhash_lock);
}
return up;
@@ -183,9 +199,9 @@
INIT_LIST_HEAD(uidhash_table + n);
/* Insert the root user immediately (init already runs as root) */
- spin_lock(&uidhash_lock);
+ spin_lock_irq(&uidhash_lock);
uid_hash_insert(&root_user, uidhashentry(0));
- spin_unlock(&uidhash_lock);
+ spin_unlock_irq(&uidhash_lock);
return 0;
}
diff --git a/lib/Makefile b/lib/Makefile
index 8535f4d..648b2c1 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -9,7 +9,7 @@
lib-y += kobject.o kref.o kobject_uevent.o klist.o
-obj-y += sort.o parser.o halfmd4.o
+obj-y += sort.o parser.o halfmd4.o iomap_copy.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
diff --git a/lib/int_sqrt.c b/lib/int_sqrt.c
index a5d2cdc..fd355a9 100644
--- a/lib/int_sqrt.c
+++ b/lib/int_sqrt.c
@@ -15,7 +15,7 @@
op = x;
res = 0;
- one = 1 << 30;
+ one = 1UL << (BITS_PER_LONG - 2);
while (one > op)
one >>= 2;
diff --git a/lib/iomap_copy.c b/lib/iomap_copy.c
new file mode 100644
index 0000000..a6b1e27
--- /dev/null
+++ b/lib/iomap_copy.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2006 PathScale, Inc. All Rights Reserved.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+
+/**
+ * __iowrite32_copy - copy data to MMIO space, in 32-bit units
+ * @to: destination, in MMIO space (must be 32-bit aligned)
+ * @from: source (must be 32-bit aligned)
+ * @count: number of 32-bit quantities to copy
+ *
+ * Copy data from kernel space to MMIO space, in units of 32 bits at a
+ * time. Order of access is not guaranteed, nor is a memory barrier
+ * performed afterwards.
+ */
+void __attribute__((weak)) __iowrite32_copy(void __iomem *to,
+ const void *from,
+ size_t count)
+{
+ u32 __iomem *dst = to;
+ const u32 *src = from;
+ const u32 *end = src + count;
+
+ while (src < end)
+ __raw_writel(*src++, dst++);
+}
+EXPORT_SYMBOL_GPL(__iowrite32_copy);
diff --git a/lib/kobject.c b/lib/kobject.c
index 7a0e680..efe67fa 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -72,6 +72,8 @@
* Add 1 to strlen for leading '/' of each level.
*/
do {
+ if (kobject_name(parent) == NULL)
+ return 0;
length += strlen(kobject_name(parent)) + 1;
parent = parent->parent;
} while (parent);
@@ -107,6 +109,8 @@
int len;
len = get_kobj_path_length(kobj);
+ if (len == 0)
+ return NULL;
path = kmalloc(len, gfp_mask);
if (!path)
return NULL;
@@ -162,6 +166,11 @@
return -ENOENT;
if (!kobj->k_name)
kobj->k_name = kobj->name;
+ if (!kobj->k_name) {
+ pr_debug("kobject attempted to be registered with no name!\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
parent = kobject_get(kobj->parent);
pr_debug("kobject %s: registering. parent: %s, set: %s\n",
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index f56e27a..1b1985c 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -22,7 +22,7 @@
#include <linux/kobject.h>
#include <net/sock.h>
-#define BUFFER_SIZE 1024 /* buffer for the variables */
+#define BUFFER_SIZE 2048 /* buffer for the variables */
#define NUM_ENVP 32 /* number of env pointers */
#if defined(CONFIG_HOTPLUG) && defined(CONFIG_NET)
diff --git a/lib/spinlock_debug.c b/lib/spinlock_debug.c
index c8bb8cc..d8b6bb4 100644
--- a/lib/spinlock_debug.c
+++ b/lib/spinlock_debug.c
@@ -72,9 +72,9 @@
for (;;) {
for (i = 0; i < loops_per_jiffy * HZ; i++) {
- cpu_relax();
if (__raw_spin_trylock(&lock->raw_lock))
return;
+ __delay(1);
}
/* lockup suspected: */
if (print_once) {
@@ -144,9 +144,9 @@
for (;;) {
for (i = 0; i < loops_per_jiffy * HZ; i++) {
- cpu_relax();
if (__raw_read_trylock(&lock->raw_lock))
return;
+ __delay(1);
}
/* lockup suspected: */
if (print_once) {
@@ -217,9 +217,9 @@
for (;;) {
for (i = 0; i < loops_per_jiffy * HZ; i++) {
- cpu_relax();
if (__raw_write_trylock(&lock->raw_lock))
return;
+ __delay(1);
}
/* lockup suspected: */
if (print_once) {
diff --git a/lib/ts_bm.c b/lib/ts_bm.c
index 8a8b3a1..c4c1ac5 100644
--- a/lib/ts_bm.c
+++ b/lib/ts_bm.c
@@ -94,10 +94,28 @@
return UINT_MAX;
}
+static int subpattern(u8 *pattern, int i, int j, int g)
+{
+ int x = i+g-1, y = j+g-1, ret = 0;
+
+ while(pattern[x--] == pattern[y--]) {
+ if (y < 0) {
+ ret = 1;
+ break;
+ }
+ if (--g == 0) {
+ ret = pattern[i-1] != pattern[j-1];
+ break;
+ }
+ }
+
+ return ret;
+}
+
static void compute_prefix_tbl(struct ts_bm *bm, const u8 *pattern,
unsigned int len)
{
- int i, j, ended, l[ASIZE];
+ int i, j, g;
for (i = 0; i < ASIZE; i++)
bm->bad_shift[i] = len;
@@ -106,23 +124,15 @@
/* Compute the good shift array, used to match reocurrences
* of a subpattern */
- for (i = 1; i < bm->patlen; i++) {
- for (j = 0; j < bm->patlen && bm->pattern[bm->patlen - 1 - j]
- == bm->pattern[bm->patlen - 1 - i - j]; j++);
- l[i] = j;
- }
-
bm->good_shift[0] = 1;
for (i = 1; i < bm->patlen; i++)
bm->good_shift[i] = bm->patlen;
- for (i = bm->patlen - 1; i > 0; i--)
- bm->good_shift[l[i]] = i;
- ended = 0;
- for (i = 0; i < bm->patlen; i++) {
- if (l[i] == bm->patlen - 1 - i)
- ended = i;
- if (ended)
- bm->good_shift[i] = ended;
+ for (i = bm->patlen-1, g = 1; i > 0; g++, i--) {
+ for (j = i-1; j >= 1-g ; j--)
+ if (subpattern(bm->pattern, i, j, g)) {
+ bm->good_shift[g] = bm->patlen-j-g;
+ break;
+ }
}
}
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index b21d78c..67f2951 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -107,7 +107,7 @@
set_page_count(page, 1);
page[1].mapping = (void *)free_huge_page;
for (i = 0; i < (HPAGE_SIZE/PAGE_SIZE); ++i)
- clear_highpage(&page[i]);
+ clear_user_highpage(&page[i], addr);
return page;
}
@@ -391,12 +391,7 @@
if (!new_page) {
page_cache_release(old_page);
-
- /* Logically this is OOM, not a SIGBUS, but an OOM
- * could cause the kernel to go killing other
- * processes which won't help the hugepage situation
- * at all (?) */
- return VM_FAULT_SIGBUS;
+ return VM_FAULT_OOM;
}
spin_unlock(&mm->page_table_lock);
@@ -444,6 +439,7 @@
page = alloc_huge_page(vma, address);
if (!page) {
hugetlb_put_quota(mapping);
+ ret = VM_FAULT_OOM;
goto out;
}
diff --git a/mm/memory.c b/mm/memory.c
index 7a11ddd..2bee1f2 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1871,6 +1871,7 @@
goto out;
entry = pte_to_swp_entry(orig_pte);
+again:
page = lookup_swap_cache(entry);
if (!page) {
swapin_readahead(entry, address, vma);
@@ -1894,6 +1895,12 @@
mark_page_accessed(page);
lock_page(page);
+ if (!PageSwapCache(page)) {
+ /* Page migration has occured */
+ unlock_page(page);
+ page_cache_release(page);
+ goto again;
+ }
/*
* Back out if somebody else already faulted in this pte.
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 7379018..3bd7fb7 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -95,6 +95,9 @@
#define MPOL_MF_INVERT (MPOL_MF_INTERNAL << 1) /* Invert check for nodemask */
#define MPOL_MF_STATS (MPOL_MF_INTERNAL << 2) /* Gather statistics */
+/* The number of pages to migrate per call to migrate_pages() */
+#define MIGRATE_CHUNK_SIZE 256
+
static kmem_cache_t *policy_cache;
static kmem_cache_t *sn_cache;
@@ -543,24 +546,91 @@
}
}
-static int swap_pages(struct list_head *pagelist)
+/*
+ * Migrate the list 'pagelist' of pages to a certain destination.
+ *
+ * Specify destination with either non-NULL vma or dest_node >= 0
+ * Return the number of pages not migrated or error code
+ */
+static int migrate_pages_to(struct list_head *pagelist,
+ struct vm_area_struct *vma, int dest)
{
+ LIST_HEAD(newlist);
LIST_HEAD(moved);
LIST_HEAD(failed);
- int n;
+ int err = 0;
+ int nr_pages;
+ struct page *page;
+ struct list_head *p;
- n = migrate_pages(pagelist, NULL, &moved, &failed);
- putback_lru_pages(&failed);
- putback_lru_pages(&moved);
+redo:
+ nr_pages = 0;
+ list_for_each(p, pagelist) {
+ if (vma)
+ page = alloc_page_vma(GFP_HIGHUSER, vma, vma->vm_start);
+ else
+ page = alloc_pages_node(dest, GFP_HIGHUSER, 0);
- return n;
+ if (!page) {
+ err = -ENOMEM;
+ goto out;
+ }
+ list_add(&page->lru, &newlist);
+ nr_pages++;
+ if (nr_pages > MIGRATE_CHUNK_SIZE);
+ break;
+ }
+ err = migrate_pages(pagelist, &newlist, &moved, &failed);
+
+ putback_lru_pages(&moved); /* Call release pages instead ?? */
+
+ if (err >= 0 && list_empty(&newlist) && !list_empty(pagelist))
+ goto redo;
+out:
+ /* Return leftover allocated pages */
+ while (!list_empty(&newlist)) {
+ page = list_entry(newlist.next, struct page, lru);
+ list_del(&page->lru);
+ __free_page(page);
+ }
+ list_splice(&failed, pagelist);
+ if (err < 0)
+ return err;
+
+ /* Calculate number of leftover pages */
+ nr_pages = 0;
+ list_for_each(p, pagelist)
+ nr_pages++;
+ return nr_pages;
}
/*
- * For now migrate_pages simply swaps out the pages from nodes that are in
- * the source set but not in the target set. In the future, we would
- * want a function that moves pages between the two nodesets in such
- * a way as to preserve the physical layout as much as possible.
+ * Migrate pages from one node to a target node.
+ * Returns error or the number of pages not migrated.
+ */
+int migrate_to_node(struct mm_struct *mm, int source, int dest, int flags)
+{
+ nodemask_t nmask;
+ LIST_HEAD(pagelist);
+ int err = 0;
+
+ nodes_clear(nmask);
+ node_set(source, nmask);
+
+ check_range(mm, mm->mmap->vm_start, TASK_SIZE, &nmask,
+ flags | MPOL_MF_DISCONTIG_OK, &pagelist);
+
+ if (!list_empty(&pagelist)) {
+ err = migrate_pages_to(&pagelist, NULL, dest);
+ if (!list_empty(&pagelist))
+ putback_lru_pages(&pagelist);
+ }
+ return err;
+}
+
+/*
+ * Move pages between the two nodesets so as to preserve the physical
+ * layout as much as possible.
*
* Returns the number of page that could not be moved.
*/
@@ -568,22 +638,76 @@
const nodemask_t *from_nodes, const nodemask_t *to_nodes, int flags)
{
LIST_HEAD(pagelist);
- int count = 0;
- nodemask_t nodes;
+ int busy = 0;
+ int err = 0;
+ nodemask_t tmp;
- nodes_andnot(nodes, *from_nodes, *to_nodes);
+ down_read(&mm->mmap_sem);
- down_read(&mm->mmap_sem);
- check_range(mm, mm->mmap->vm_start, TASK_SIZE, &nodes,
- flags | MPOL_MF_DISCONTIG_OK, &pagelist);
+/*
+ * Find a 'source' bit set in 'tmp' whose corresponding 'dest'
+ * bit in 'to' is not also set in 'tmp'. Clear the found 'source'
+ * bit in 'tmp', and return that <source, dest> pair for migration.
+ * The pair of nodemasks 'to' and 'from' define the map.
+ *
+ * If no pair of bits is found that way, fallback to picking some
+ * pair of 'source' and 'dest' bits that are not the same. If the
+ * 'source' and 'dest' bits are the same, this represents a node
+ * that will be migrating to itself, so no pages need move.
+ *
+ * If no bits are left in 'tmp', or if all remaining bits left
+ * in 'tmp' correspond to the same bit in 'to', return false
+ * (nothing left to migrate).
+ *
+ * This lets us pick a pair of nodes to migrate between, such that
+ * if possible the dest node is not already occupied by some other
+ * source node, minimizing the risk of overloading the memory on a
+ * node that would happen if we migrated incoming memory to a node
+ * before migrating outgoing memory source that same node.
+ *
+ * A single scan of tmp is sufficient. As we go, we remember the
+ * most recent <s, d> pair that moved (s != d). If we find a pair
+ * that not only moved, but what's better, moved to an empty slot
+ * (d is not set in tmp), then we break out then, with that pair.
+ * Otherwise when we finish scannng from_tmp, we at least have the
+ * most recent <s, d> pair that moved. If we get all the way through
+ * the scan of tmp without finding any node that moved, much less
+ * moved to an empty node, then there is nothing left worth migrating.
+ */
- if (!list_empty(&pagelist)) {
- count = swap_pages(&pagelist);
- putback_lru_pages(&pagelist);
+ tmp = *from_nodes;
+ while (!nodes_empty(tmp)) {
+ int s,d;
+ int source = -1;
+ int dest = 0;
+
+ for_each_node_mask(s, tmp) {
+ d = node_remap(s, *from_nodes, *to_nodes);
+ if (s == d)
+ continue;
+
+ source = s; /* Node moved. Memorize */
+ dest = d;
+
+ /* dest not in remaining from nodes? */
+ if (!node_isset(dest, tmp))
+ break;
+ }
+ if (source == -1)
+ break;
+
+ node_clear(source, tmp);
+ err = migrate_to_node(mm, source, dest, flags);
+ if (err > 0)
+ busy += err;
+ if (err < 0)
+ break;
}
up_read(&mm->mmap_sem);
- return count;
+ if (err < 0)
+ return err;
+ return busy;
}
long do_mbind(unsigned long start, unsigned long len,
@@ -643,8 +767,9 @@
int nr_failed = 0;
err = mbind_range(vma, start, end, new);
+
if (!list_empty(&pagelist))
- nr_failed = swap_pages(&pagelist);
+ nr_failed = migrate_pages_to(&pagelist, vma, -1);
if (!err && nr_failed && (flags & MPOL_MF_STRICT))
err = -EIO;
@@ -1034,6 +1159,7 @@
return interleave_nodes(pol);
}
+#ifdef CONFIG_HUGETLBFS
/* Return a zonelist suitable for a huge page allocation. */
struct zonelist *huge_zonelist(struct vm_area_struct *vma, unsigned long addr)
{
@@ -1047,6 +1173,7 @@
}
return zonelist_policy(GFP_HIGHUSER, pol);
}
+#endif
/* Allocate a page in interleaved policy.
Own path because it needs to do special accounting. */
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 14bd4ec..b05ab8f 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -271,6 +271,7 @@
if (printk_ratelimit()) {
printk("oom-killer: gfp_mask=0x%x, order=%d\n",
gfp_mask, order);
+ dump_stack();
show_mem();
}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index df54e2f..dde04ff 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1213,18 +1213,21 @@
{
int cpu = 0;
- memset(ret, 0, sizeof(*ret));
+ memset(ret, 0, nr * sizeof(unsigned long));
cpus_and(*cpumask, *cpumask, cpu_online_map);
cpu = first_cpu(*cpumask);
while (cpu < NR_CPUS) {
unsigned long *in, *out, off;
+ if (!cpu_isset(cpu, *cpumask))
+ continue;
+
in = (unsigned long *)&per_cpu(page_states, cpu);
cpu = next_cpu(cpu, *cpumask);
- if (cpu < NR_CPUS)
+ if (likely(cpu < NR_CPUS))
prefetch(&per_cpu(page_states, cpu));
out = (unsigned long *)ret;
@@ -1799,7 +1802,7 @@
memmap_init_zone((size), (nid), (zone), (start_pfn))
#endif
-static int __meminit zone_batchsize(struct zone *zone)
+static int __cpuinit zone_batchsize(struct zone *zone)
{
int batch;
@@ -1886,14 +1889,13 @@
* not check if the processor is online before following the pageset pointer.
* Other parts of the kernel may not check if the zone is available.
*/
-static struct per_cpu_pageset
- boot_pageset[NR_CPUS];
+static struct per_cpu_pageset boot_pageset[NR_CPUS];
/*
* Dynamically allocate memory for the
* per cpu pageset array in struct zone.
*/
-static int __meminit process_zones(int cpu)
+static int __cpuinit process_zones(int cpu)
{
struct zone *zone, *dzone;
@@ -1934,7 +1936,7 @@
}
}
-static int __meminit pageset_cpuup_callback(struct notifier_block *nfb,
+static int __cpuinit pageset_cpuup_callback(struct notifier_block *nfb,
unsigned long action,
void *hcpu)
{
diff --git a/mm/rmap.c b/mm/rmap.c
index d85a99d..df2c41c 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -52,6 +52,7 @@
#include <linux/init.h>
#include <linux/rmap.h>
#include <linux/rcupdate.h>
+#include <linux/module.h>
#include <asm/tlbflush.h>
@@ -205,6 +206,36 @@
return anon_vma;
}
+#ifdef CONFIG_MIGRATION
+/*
+ * Remove an anonymous page from swap replacing the swap pte's
+ * through real pte's pointing to valid pages and then releasing
+ * the page from the swap cache.
+ *
+ * Must hold page lock on page.
+ */
+void remove_from_swap(struct page *page)
+{
+ struct anon_vma *anon_vma;
+ struct vm_area_struct *vma;
+
+ if (!PageAnon(page) || !PageSwapCache(page))
+ return;
+
+ anon_vma = page_lock_anon_vma(page);
+ if (!anon_vma)
+ return;
+
+ list_for_each_entry(vma, &anon_vma->head, anon_vma_node)
+ remove_vma_swap(vma, page);
+
+ spin_unlock(&anon_vma->lock);
+
+ delete_from_swap_cache(page);
+}
+EXPORT_SYMBOL(remove_from_swap);
+#endif
+
/*
* At what user virtual address is page expected in vma?
*/
@@ -541,7 +572,8 @@
* Subfunctions of try_to_unmap: try_to_unmap_one called
* repeatedly from either try_to_unmap_anon or try_to_unmap_file.
*/
-static int try_to_unmap_one(struct page *page, struct vm_area_struct *vma)
+static int try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
+ int ignore_refs)
{
struct mm_struct *mm = vma->vm_mm;
unsigned long address;
@@ -564,7 +596,8 @@
* skipped over this mm) then we should reactivate it.
*/
if ((vma->vm_flags & VM_LOCKED) ||
- ptep_clear_flush_young(vma, address, pte)) {
+ (ptep_clear_flush_young(vma, address, pte)
+ && !ignore_refs)) {
ret = SWAP_FAIL;
goto out_unmap;
}
@@ -698,7 +731,7 @@
pte_unmap_unlock(pte - 1, ptl);
}
-static int try_to_unmap_anon(struct page *page)
+static int try_to_unmap_anon(struct page *page, int ignore_refs)
{
struct anon_vma *anon_vma;
struct vm_area_struct *vma;
@@ -709,7 +742,7 @@
return ret;
list_for_each_entry(vma, &anon_vma->head, anon_vma_node) {
- ret = try_to_unmap_one(page, vma);
+ ret = try_to_unmap_one(page, vma, ignore_refs);
if (ret == SWAP_FAIL || !page_mapped(page))
break;
}
@@ -726,7 +759,7 @@
*
* This function is only called from try_to_unmap for object-based pages.
*/
-static int try_to_unmap_file(struct page *page)
+static int try_to_unmap_file(struct page *page, int ignore_refs)
{
struct address_space *mapping = page->mapping;
pgoff_t pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
@@ -740,7 +773,7 @@
spin_lock(&mapping->i_mmap_lock);
vma_prio_tree_foreach(vma, &iter, &mapping->i_mmap, pgoff, pgoff) {
- ret = try_to_unmap_one(page, vma);
+ ret = try_to_unmap_one(page, vma, ignore_refs);
if (ret == SWAP_FAIL || !page_mapped(page))
goto out;
}
@@ -825,16 +858,16 @@
* SWAP_AGAIN - we missed a mapping, try again later
* SWAP_FAIL - the page is unswappable
*/
-int try_to_unmap(struct page *page)
+int try_to_unmap(struct page *page, int ignore_refs)
{
int ret;
BUG_ON(!PageLocked(page));
if (PageAnon(page))
- ret = try_to_unmap_anon(page);
+ ret = try_to_unmap_anon(page, ignore_refs);
else
- ret = try_to_unmap_file(page);
+ ret = try_to_unmap_file(page, ignore_refs);
if (!page_mapped(page))
ret = SWAP_SUCCESS;
diff --git a/mm/shmem.c b/mm/shmem.c
index ce501bc..f7ac7b8 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1028,6 +1028,14 @@
page_cache_release(swappage);
goto repeat;
}
+ if (!PageSwapCache(swappage)) {
+ /* Page migration has occured */
+ shmem_swp_unmap(entry);
+ spin_unlock(&info->lock);
+ unlock_page(swappage);
+ page_cache_release(swappage);
+ goto repeat;
+ }
if (PageWriteback(swappage)) {
shmem_swp_unmap(entry);
spin_unlock(&info->lock);
diff --git a/mm/slab.c b/mm/slab.c
index 6f8495e..d66c2b0 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -55,7 +55,7 @@
*
* SMP synchronization:
* constructors and destructors are called without any locking.
- * Several members in kmem_cache_t and struct slab never change, they
+ * Several members in struct kmem_cache and struct slab never change, they
* are accessed without any locking.
* The per-cpu arrays are never accessed from the wrong cpu, no locking,
* and local interrupts are disabled so slab code is preempt-safe.
@@ -244,7 +244,7 @@
*/
struct slab_rcu {
struct rcu_head head;
- kmem_cache_t *cachep;
+ struct kmem_cache *cachep;
void *addr;
};
@@ -294,6 +294,7 @@
unsigned long next_reap;
int free_touched;
unsigned int free_limit;
+ unsigned int colour_next; /* Per-node cache coloring */
spinlock_t list_lock;
struct array_cache *shared; /* shared per node */
struct array_cache **alien; /* on other nodes */
@@ -316,6 +317,8 @@
*/
static __always_inline int index_of(const size_t size)
{
+ extern void __bad_size(void);
+
if (__builtin_constant_p(size)) {
int i = 0;
@@ -326,25 +329,23 @@
i++;
#include "linux/kmalloc_sizes.h"
#undef CACHE
- {
- extern void __bad_size(void);
- __bad_size();
- }
+ __bad_size();
} else
- BUG();
+ __bad_size();
return 0;
}
#define INDEX_AC index_of(sizeof(struct arraycache_init))
#define INDEX_L3 index_of(sizeof(struct kmem_list3))
-static inline void kmem_list3_init(struct kmem_list3 *parent)
+static void kmem_list3_init(struct kmem_list3 *parent)
{
INIT_LIST_HEAD(&parent->slabs_full);
INIT_LIST_HEAD(&parent->slabs_partial);
INIT_LIST_HEAD(&parent->slabs_free);
parent->shared = NULL;
parent->alien = NULL;
+ parent->colour_next = 0;
spin_lock_init(&parent->list_lock);
parent->free_objects = 0;
parent->free_touched = 0;
@@ -364,7 +365,7 @@
} while (0)
/*
- * kmem_cache_t
+ * struct kmem_cache
*
* manages a cache.
*/
@@ -375,7 +376,7 @@
unsigned int batchcount;
unsigned int limit;
unsigned int shared;
- unsigned int objsize;
+ unsigned int buffer_size;
/* 2) touched by every alloc & free from the backend */
struct kmem_list3 *nodelists[MAX_NUMNODES];
unsigned int flags; /* constant flags */
@@ -391,16 +392,15 @@
size_t colour; /* cache colouring range */
unsigned int colour_off; /* colour offset */
- unsigned int colour_next; /* cache colouring */
- kmem_cache_t *slabp_cache;
+ struct kmem_cache *slabp_cache;
unsigned int slab_size;
unsigned int dflags; /* dynamic flags */
/* constructor func */
- void (*ctor) (void *, kmem_cache_t *, unsigned long);
+ void (*ctor) (void *, struct kmem_cache *, unsigned long);
/* de-constructor func */
- void (*dtor) (void *, kmem_cache_t *, unsigned long);
+ void (*dtor) (void *, struct kmem_cache *, unsigned long);
/* 4) cache creation/removal */
const char *name;
@@ -423,8 +423,14 @@
atomic_t freemiss;
#endif
#if DEBUG
- int dbghead;
- int reallen;
+ /*
+ * If debugging is enabled, then the allocator can add additional
+ * fields and/or padding to every object. buffer_size contains the total
+ * object size including these internal fields, the following two
+ * variables contain the offset to the user object and its size.
+ */
+ int obj_offset;
+ int obj_size;
#endif
};
@@ -495,50 +501,50 @@
/* memory layout of objects:
* 0 : objp
- * 0 .. cachep->dbghead - BYTES_PER_WORD - 1: padding. This ensures that
+ * 0 .. cachep->obj_offset - BYTES_PER_WORD - 1: padding. This ensures that
* the end of an object is aligned with the end of the real
* allocation. Catches writes behind the end of the allocation.
- * cachep->dbghead - BYTES_PER_WORD .. cachep->dbghead - 1:
+ * cachep->obj_offset - BYTES_PER_WORD .. cachep->obj_offset - 1:
* redzone word.
- * cachep->dbghead: The real object.
- * cachep->objsize - 2* BYTES_PER_WORD: redzone word [BYTES_PER_WORD long]
- * cachep->objsize - 1* BYTES_PER_WORD: last caller address [BYTES_PER_WORD long]
+ * cachep->obj_offset: The real object.
+ * cachep->buffer_size - 2* BYTES_PER_WORD: redzone word [BYTES_PER_WORD long]
+ * cachep->buffer_size - 1* BYTES_PER_WORD: last caller address [BYTES_PER_WORD long]
*/
-static int obj_dbghead(kmem_cache_t *cachep)
+static int obj_offset(struct kmem_cache *cachep)
{
- return cachep->dbghead;
+ return cachep->obj_offset;
}
-static int obj_reallen(kmem_cache_t *cachep)
+static int obj_size(struct kmem_cache *cachep)
{
- return cachep->reallen;
+ return cachep->obj_size;
}
-static unsigned long *dbg_redzone1(kmem_cache_t *cachep, void *objp)
+static unsigned long *dbg_redzone1(struct kmem_cache *cachep, void *objp)
{
BUG_ON(!(cachep->flags & SLAB_RED_ZONE));
- return (unsigned long*) (objp+obj_dbghead(cachep)-BYTES_PER_WORD);
+ return (unsigned long*) (objp+obj_offset(cachep)-BYTES_PER_WORD);
}
-static unsigned long *dbg_redzone2(kmem_cache_t *cachep, void *objp)
+static unsigned long *dbg_redzone2(struct kmem_cache *cachep, void *objp)
{
BUG_ON(!(cachep->flags & SLAB_RED_ZONE));
if (cachep->flags & SLAB_STORE_USER)
- return (unsigned long *)(objp + cachep->objsize -
+ return (unsigned long *)(objp + cachep->buffer_size -
2 * BYTES_PER_WORD);
- return (unsigned long *)(objp + cachep->objsize - BYTES_PER_WORD);
+ return (unsigned long *)(objp + cachep->buffer_size - BYTES_PER_WORD);
}
-static void **dbg_userword(kmem_cache_t *cachep, void *objp)
+static void **dbg_userword(struct kmem_cache *cachep, void *objp)
{
BUG_ON(!(cachep->flags & SLAB_STORE_USER));
- return (void **)(objp + cachep->objsize - BYTES_PER_WORD);
+ return (void **)(objp + cachep->buffer_size - BYTES_PER_WORD);
}
#else
-#define obj_dbghead(x) 0
-#define obj_reallen(cachep) (cachep->objsize)
+#define obj_offset(x) 0
+#define obj_size(cachep) (cachep->buffer_size)
#define dbg_redzone1(cachep, objp) ({BUG(); (unsigned long *)NULL;})
#define dbg_redzone2(cachep, objp) ({BUG(); (unsigned long *)NULL;})
#define dbg_userword(cachep, objp) ({BUG(); (void **)NULL;})
@@ -591,6 +597,18 @@
return (struct slab *)page->lru.prev;
}
+static inline struct kmem_cache *virt_to_cache(const void *obj)
+{
+ struct page *page = virt_to_page(obj);
+ return page_get_cache(page);
+}
+
+static inline struct slab *virt_to_slab(const void *obj)
+{
+ struct page *page = virt_to_page(obj);
+ return page_get_slab(page);
+}
+
/* These are the default caches for kmalloc. Custom caches can have other sizes. */
struct cache_sizes malloc_sizes[] = {
#define CACHE(x) { .cs_size = (x) },
@@ -619,16 +637,16 @@
{ {0, BOOT_CPUCACHE_ENTRIES, 1, 0} };
/* internal cache of cache description objs */
-static kmem_cache_t cache_cache = {
+static struct kmem_cache cache_cache = {
.batchcount = 1,
.limit = BOOT_CPUCACHE_ENTRIES,
.shared = 1,
- .objsize = sizeof(kmem_cache_t),
+ .buffer_size = sizeof(struct kmem_cache),
.flags = SLAB_NO_REAP,
.spinlock = SPIN_LOCK_UNLOCKED,
.name = "kmem_cache",
#if DEBUG
- .reallen = sizeof(kmem_cache_t),
+ .obj_size = sizeof(struct kmem_cache),
#endif
};
@@ -657,17 +675,17 @@
static DEFINE_PER_CPU(struct work_struct, reap_work);
-static void free_block(kmem_cache_t *cachep, void **objpp, int len, int node);
-static void enable_cpucache(kmem_cache_t *cachep);
+static void free_block(struct kmem_cache *cachep, void **objpp, int len, int node);
+static void enable_cpucache(struct kmem_cache *cachep);
static void cache_reap(void *unused);
-static int __node_shrink(kmem_cache_t *cachep, int node);
+static int __node_shrink(struct kmem_cache *cachep, int node);
-static inline struct array_cache *ac_data(kmem_cache_t *cachep)
+static inline struct array_cache *cpu_cache_get(struct kmem_cache *cachep)
{
return cachep->array[smp_processor_id()];
}
-static inline kmem_cache_t *__find_general_cachep(size_t size, gfp_t gfpflags)
+static inline struct kmem_cache *__find_general_cachep(size_t size, gfp_t gfpflags)
{
struct cache_sizes *csizep = malloc_sizes;
@@ -691,43 +709,80 @@
return csizep->cs_cachep;
}
-kmem_cache_t *kmem_find_general_cachep(size_t size, gfp_t gfpflags)
+struct kmem_cache *kmem_find_general_cachep(size_t size, gfp_t gfpflags)
{
return __find_general_cachep(size, gfpflags);
}
EXPORT_SYMBOL(kmem_find_general_cachep);
-/* Cal the num objs, wastage, and bytes left over for a given slab size. */
-static void cache_estimate(unsigned long gfporder, size_t size, size_t align,
- int flags, size_t *left_over, unsigned int *num)
+static size_t slab_mgmt_size(size_t nr_objs, size_t align)
{
- int i;
- size_t wastage = PAGE_SIZE << gfporder;
- size_t extra = 0;
- size_t base = 0;
+ return ALIGN(sizeof(struct slab)+nr_objs*sizeof(kmem_bufctl_t), align);
+}
- if (!(flags & CFLGS_OFF_SLAB)) {
- base = sizeof(struct slab);
- extra = sizeof(kmem_bufctl_t);
+/* Calculate the number of objects and left-over bytes for a given
+ buffer size. */
+static void cache_estimate(unsigned long gfporder, size_t buffer_size,
+ size_t align, int flags, size_t *left_over,
+ unsigned int *num)
+{
+ int nr_objs;
+ size_t mgmt_size;
+ size_t slab_size = PAGE_SIZE << gfporder;
+
+ /*
+ * The slab management structure can be either off the slab or
+ * on it. For the latter case, the memory allocated for a
+ * slab is used for:
+ *
+ * - The struct slab
+ * - One kmem_bufctl_t for each object
+ * - Padding to respect alignment of @align
+ * - @buffer_size bytes for each object
+ *
+ * If the slab management structure is off the slab, then the
+ * alignment will already be calculated into the size. Because
+ * the slabs are all pages aligned, the objects will be at the
+ * correct alignment when allocated.
+ */
+ if (flags & CFLGS_OFF_SLAB) {
+ mgmt_size = 0;
+ nr_objs = slab_size / buffer_size;
+
+ if (nr_objs > SLAB_LIMIT)
+ nr_objs = SLAB_LIMIT;
+ } else {
+ /*
+ * Ignore padding for the initial guess. The padding
+ * is at most @align-1 bytes, and @buffer_size is at
+ * least @align. In the worst case, this result will
+ * be one greater than the number of objects that fit
+ * into the memory allocation when taking the padding
+ * into account.
+ */
+ nr_objs = (slab_size - sizeof(struct slab)) /
+ (buffer_size + sizeof(kmem_bufctl_t));
+
+ /*
+ * This calculated number will be either the right
+ * amount, or one greater than what we want.
+ */
+ if (slab_mgmt_size(nr_objs, align) + nr_objs*buffer_size
+ > slab_size)
+ nr_objs--;
+
+ if (nr_objs > SLAB_LIMIT)
+ nr_objs = SLAB_LIMIT;
+
+ mgmt_size = slab_mgmt_size(nr_objs, align);
}
- i = 0;
- while (i * size + ALIGN(base + i * extra, align) <= wastage)
- i++;
- if (i > 0)
- i--;
-
- if (i > SLAB_LIMIT)
- i = SLAB_LIMIT;
-
- *num = i;
- wastage -= i * size;
- wastage -= ALIGN(base + i * extra, align);
- *left_over = wastage;
+ *num = nr_objs;
+ *left_over = slab_size - nr_objs*buffer_size - mgmt_size;
}
#define slab_error(cachep, msg) __slab_error(__FUNCTION__, cachep, msg)
-static void __slab_error(const char *function, kmem_cache_t *cachep, char *msg)
+static void __slab_error(const char *function, struct kmem_cache *cachep, char *msg)
{
printk(KERN_ERR "slab error in %s(): cache `%s': %s\n",
function, cachep->name, msg);
@@ -774,9 +829,9 @@
}
#ifdef CONFIG_NUMA
-static void *__cache_alloc_node(kmem_cache_t *, gfp_t, int);
+static void *__cache_alloc_node(struct kmem_cache *, gfp_t, int);
-static inline struct array_cache **alloc_alien_cache(int node, int limit)
+static struct array_cache **alloc_alien_cache(int node, int limit)
{
struct array_cache **ac_ptr;
int memsize = sizeof(void *) * MAX_NUMNODES;
@@ -803,7 +858,7 @@
return ac_ptr;
}
-static inline void free_alien_cache(struct array_cache **ac_ptr)
+static void free_alien_cache(struct array_cache **ac_ptr)
{
int i;
@@ -816,8 +871,8 @@
kfree(ac_ptr);
}
-static inline void __drain_alien_cache(kmem_cache_t *cachep,
- struct array_cache *ac, int node)
+static void __drain_alien_cache(struct kmem_cache *cachep,
+ struct array_cache *ac, int node)
{
struct kmem_list3 *rl3 = cachep->nodelists[node];
@@ -829,14 +884,14 @@
}
}
-static void drain_alien_cache(kmem_cache_t *cachep, struct kmem_list3 *l3)
+static void drain_alien_cache(struct kmem_cache *cachep, struct array_cache **alien)
{
int i = 0;
struct array_cache *ac;
unsigned long flags;
for_each_online_node(i) {
- ac = l3->alien[i];
+ ac = alien[i];
if (ac) {
spin_lock_irqsave(&ac->lock, flags);
__drain_alien_cache(cachep, ac, i);
@@ -845,16 +900,25 @@
}
}
#else
-#define alloc_alien_cache(node, limit) do { } while (0)
-#define free_alien_cache(ac_ptr) do { } while (0)
-#define drain_alien_cache(cachep, l3) do { } while (0)
+
+#define drain_alien_cache(cachep, alien) do { } while (0)
+
+static inline struct array_cache **alloc_alien_cache(int node, int limit)
+{
+ return (struct array_cache **) 0x01020304ul;
+}
+
+static inline void free_alien_cache(struct array_cache **ac_ptr)
+{
+}
+
#endif
static int __devinit cpuup_callback(struct notifier_block *nfb,
unsigned long action, void *hcpu)
{
long cpu = (long)hcpu;
- kmem_cache_t *cachep;
+ struct kmem_cache *cachep;
struct kmem_list3 *l3 = NULL;
int node = cpu_to_node(cpu);
int memsize = sizeof(struct kmem_list3);
@@ -881,6 +945,11 @@
l3->next_reap = jiffies + REAPTIMEOUT_LIST3 +
((unsigned long)cachep) % REAPTIMEOUT_LIST3;
+ /*
+ * The l3s don't come and go as CPUs come and
+ * go. cache_chain_mutex is sufficient
+ * protection here.
+ */
cachep->nodelists[node] = l3;
}
@@ -895,26 +964,46 @@
& array cache's */
list_for_each_entry(cachep, &cache_chain, next) {
struct array_cache *nc;
+ struct array_cache *shared;
+ struct array_cache **alien;
nc = alloc_arraycache(node, cachep->limit,
- cachep->batchcount);
+ cachep->batchcount);
if (!nc)
goto bad;
+ shared = alloc_arraycache(node,
+ cachep->shared * cachep->batchcount,
+ 0xbaadf00d);
+ if (!shared)
+ goto bad;
+
+ alien = alloc_alien_cache(node, cachep->limit);
+ if (!alien)
+ goto bad;
cachep->array[cpu] = nc;
l3 = cachep->nodelists[node];
BUG_ON(!l3);
- if (!l3->shared) {
- if (!(nc = alloc_arraycache(node,
- cachep->shared *
- cachep->batchcount,
- 0xbaadf00d)))
- goto bad;
- /* we are serialised from CPU_DEAD or
- CPU_UP_CANCELLED by the cpucontrol lock */
- l3->shared = nc;
+ spin_lock_irq(&l3->list_lock);
+ if (!l3->shared) {
+ /*
+ * We are serialised from CPU_DEAD or
+ * CPU_UP_CANCELLED by the cpucontrol lock
+ */
+ l3->shared = shared;
+ shared = NULL;
}
+#ifdef CONFIG_NUMA
+ if (!l3->alien) {
+ l3->alien = alien;
+ alien = NULL;
+ }
+#endif
+ spin_unlock_irq(&l3->list_lock);
+
+ kfree(shared);
+ free_alien_cache(alien);
}
mutex_unlock(&cache_chain_mutex);
break;
@@ -923,25 +1012,34 @@
break;
#ifdef CONFIG_HOTPLUG_CPU
case CPU_DEAD:
+ /*
+ * Even if all the cpus of a node are down, we don't free the
+ * kmem_list3 of any cache. This to avoid a race between
+ * cpu_down, and a kmalloc allocation from another cpu for
+ * memory from the node of the cpu going down. The list3
+ * structure is usually allocated from kmem_cache_create() and
+ * gets destroyed at kmem_cache_destroy().
+ */
/* fall thru */
case CPU_UP_CANCELED:
mutex_lock(&cache_chain_mutex);
list_for_each_entry(cachep, &cache_chain, next) {
struct array_cache *nc;
+ struct array_cache *shared;
+ struct array_cache **alien;
cpumask_t mask;
mask = node_to_cpumask(node);
- spin_lock_irq(&cachep->spinlock);
/* cpu is dead; no one can alloc from it. */
nc = cachep->array[cpu];
cachep->array[cpu] = NULL;
l3 = cachep->nodelists[node];
if (!l3)
- goto unlock_cache;
+ goto free_array_cache;
- spin_lock(&l3->list_lock);
+ spin_lock_irq(&l3->list_lock);
/* Free limit for this kmem_list3 */
l3->free_limit -= cachep->batchcount;
@@ -949,34 +1047,44 @@
free_block(cachep, nc->entry, nc->avail, node);
if (!cpus_empty(mask)) {
- spin_unlock(&l3->list_lock);
- goto unlock_cache;
+ spin_unlock_irq(&l3->list_lock);
+ goto free_array_cache;
}
- if (l3->shared) {
+ shared = l3->shared;
+ if (shared) {
free_block(cachep, l3->shared->entry,
l3->shared->avail, node);
- kfree(l3->shared);
l3->shared = NULL;
}
- if (l3->alien) {
- drain_alien_cache(cachep, l3);
- free_alien_cache(l3->alien);
- l3->alien = NULL;
- }
- /* free slabs belonging to this node */
- if (__node_shrink(cachep, node)) {
- cachep->nodelists[node] = NULL;
- spin_unlock(&l3->list_lock);
- kfree(l3);
- } else {
- spin_unlock(&l3->list_lock);
+ alien = l3->alien;
+ l3->alien = NULL;
+
+ spin_unlock_irq(&l3->list_lock);
+
+ kfree(shared);
+ if (alien) {
+ drain_alien_cache(cachep, alien);
+ free_alien_cache(alien);
}
- unlock_cache:
- spin_unlock_irq(&cachep->spinlock);
+free_array_cache:
kfree(nc);
}
+ /*
+ * In the previous loop, all the objects were freed to
+ * the respective cache's slabs, now we can go ahead and
+ * shrink each nodelist to its limit.
+ */
+ list_for_each_entry(cachep, &cache_chain, next) {
+ l3 = cachep->nodelists[node];
+ if (!l3)
+ continue;
+ spin_lock_irq(&l3->list_lock);
+ /* free slabs belonging to this node */
+ __node_shrink(cachep, node);
+ spin_unlock_irq(&l3->list_lock);
+ }
mutex_unlock(&cache_chain_mutex);
break;
#endif
@@ -992,7 +1100,7 @@
/*
* swap the static kmem_list3 with kmalloced memory
*/
-static void init_list(kmem_cache_t *cachep, struct kmem_list3 *list, int nodeid)
+static void init_list(struct kmem_cache *cachep, struct kmem_list3 *list, int nodeid)
{
struct kmem_list3 *ptr;
@@ -1032,14 +1140,14 @@
/* Bootstrap is tricky, because several objects are allocated
* from caches that do not exist yet:
- * 1) initialize the cache_cache cache: it contains the kmem_cache_t
+ * 1) initialize the cache_cache cache: it contains the struct kmem_cache
* structures of all caches, except cache_cache itself: cache_cache
* is statically allocated.
* Initially an __init data area is used for the head array and the
* kmem_list3 structures, it's replaced with a kmalloc allocated
* array at the end of the bootstrap.
* 2) Create the first kmalloc cache.
- * The kmem_cache_t for the new cache is allocated normally.
+ * The struct kmem_cache for the new cache is allocated normally.
* An __init data area is used for the head array.
* 3) Create the remaining kmalloc caches, with minimally sized
* head arrays.
@@ -1057,15 +1165,14 @@
cache_cache.array[smp_processor_id()] = &initarray_cache.cache;
cache_cache.nodelists[numa_node_id()] = &initkmem_list3[CACHE_CACHE];
- cache_cache.objsize = ALIGN(cache_cache.objsize, cache_line_size());
+ cache_cache.buffer_size = ALIGN(cache_cache.buffer_size, cache_line_size());
- cache_estimate(0, cache_cache.objsize, cache_line_size(), 0,
+ cache_estimate(0, cache_cache.buffer_size, cache_line_size(), 0,
&left_over, &cache_cache.num);
if (!cache_cache.num)
BUG();
cache_cache.colour = left_over / cache_cache.colour_off;
- cache_cache.colour_next = 0;
cache_cache.slab_size = ALIGN(cache_cache.num * sizeof(kmem_bufctl_t) +
sizeof(struct slab), cache_line_size());
@@ -1132,8 +1239,8 @@
ptr = kmalloc(sizeof(struct arraycache_init), GFP_KERNEL);
local_irq_disable();
- BUG_ON(ac_data(&cache_cache) != &initarray_cache.cache);
- memcpy(ptr, ac_data(&cache_cache),
+ BUG_ON(cpu_cache_get(&cache_cache) != &initarray_cache.cache);
+ memcpy(ptr, cpu_cache_get(&cache_cache),
sizeof(struct arraycache_init));
cache_cache.array[smp_processor_id()] = ptr;
local_irq_enable();
@@ -1141,9 +1248,9 @@
ptr = kmalloc(sizeof(struct arraycache_init), GFP_KERNEL);
local_irq_disable();
- BUG_ON(ac_data(malloc_sizes[INDEX_AC].cs_cachep)
+ BUG_ON(cpu_cache_get(malloc_sizes[INDEX_AC].cs_cachep)
!= &initarray_generic.cache);
- memcpy(ptr, ac_data(malloc_sizes[INDEX_AC].cs_cachep),
+ memcpy(ptr, cpu_cache_get(malloc_sizes[INDEX_AC].cs_cachep),
sizeof(struct arraycache_init));
malloc_sizes[INDEX_AC].cs_cachep->array[smp_processor_id()] =
ptr;
@@ -1170,7 +1277,7 @@
/* 6) resize the head arrays to their final sizes */
{
- kmem_cache_t *cachep;
+ struct kmem_cache *cachep;
mutex_lock(&cache_chain_mutex);
list_for_each_entry(cachep, &cache_chain, next)
enable_cpucache(cachep);
@@ -1181,7 +1288,7 @@
g_cpucache_up = FULL;
/* Register a cpu startup notifier callback
- * that initializes ac_data for all new cpus
+ * that initializes cpu_cache_get for all new cpus
*/
register_cpu_notifier(&cpucache_notifier);
@@ -1213,7 +1320,7 @@
* did not request dmaable memory, we might get it, but that
* would be relatively rare and ignorable.
*/
-static void *kmem_getpages(kmem_cache_t *cachep, gfp_t flags, int nodeid)
+static void *kmem_getpages(struct kmem_cache *cachep, gfp_t flags, int nodeid)
{
struct page *page;
void *addr;
@@ -1239,7 +1346,7 @@
/*
* Interface to system's page release.
*/
-static void kmem_freepages(kmem_cache_t *cachep, void *addr)
+static void kmem_freepages(struct kmem_cache *cachep, void *addr)
{
unsigned long i = (1 << cachep->gfporder);
struct page *page = virt_to_page(addr);
@@ -1261,7 +1368,7 @@
static void kmem_rcu_free(struct rcu_head *head)
{
struct slab_rcu *slab_rcu = (struct slab_rcu *)head;
- kmem_cache_t *cachep = slab_rcu->cachep;
+ struct kmem_cache *cachep = slab_rcu->cachep;
kmem_freepages(cachep, slab_rcu->addr);
if (OFF_SLAB(cachep))
@@ -1271,12 +1378,12 @@
#if DEBUG
#ifdef CONFIG_DEBUG_PAGEALLOC
-static void store_stackinfo(kmem_cache_t *cachep, unsigned long *addr,
+static void store_stackinfo(struct kmem_cache *cachep, unsigned long *addr,
unsigned long caller)
{
- int size = obj_reallen(cachep);
+ int size = obj_size(cachep);
- addr = (unsigned long *)&((char *)addr)[obj_dbghead(cachep)];
+ addr = (unsigned long *)&((char *)addr)[obj_offset(cachep)];
if (size < 5 * sizeof(unsigned long))
return;
@@ -1304,10 +1411,10 @@
}
#endif
-static void poison_obj(kmem_cache_t *cachep, void *addr, unsigned char val)
+static void poison_obj(struct kmem_cache *cachep, void *addr, unsigned char val)
{
- int size = obj_reallen(cachep);
- addr = &((char *)addr)[obj_dbghead(cachep)];
+ int size = obj_size(cachep);
+ addr = &((char *)addr)[obj_offset(cachep)];
memset(addr, val, size);
*(unsigned char *)(addr + size - 1) = POISON_END;
@@ -1326,7 +1433,7 @@
#if DEBUG
-static void print_objinfo(kmem_cache_t *cachep, void *objp, int lines)
+static void print_objinfo(struct kmem_cache *cachep, void *objp, int lines)
{
int i, size;
char *realobj;
@@ -1344,8 +1451,8 @@
(unsigned long)*dbg_userword(cachep, objp));
printk("\n");
}
- realobj = (char *)objp + obj_dbghead(cachep);
- size = obj_reallen(cachep);
+ realobj = (char *)objp + obj_offset(cachep);
+ size = obj_size(cachep);
for (i = 0; i < size && lines; i += 16, lines--) {
int limit;
limit = 16;
@@ -1355,14 +1462,14 @@
}
}
-static void check_poison_obj(kmem_cache_t *cachep, void *objp)
+static void check_poison_obj(struct kmem_cache *cachep, void *objp)
{
char *realobj;
int size, i;
int lines = 0;
- realobj = (char *)objp + obj_dbghead(cachep);
- size = obj_reallen(cachep);
+ realobj = (char *)objp + obj_offset(cachep);
+ size = obj_size(cachep);
for (i = 0; i < size; i++) {
char exp = POISON_FREE;
@@ -1395,20 +1502,20 @@
/* Print some data about the neighboring objects, if they
* exist:
*/
- struct slab *slabp = page_get_slab(virt_to_page(objp));
+ struct slab *slabp = virt_to_slab(objp);
int objnr;
- objnr = (objp - slabp->s_mem) / cachep->objsize;
+ objnr = (unsigned)(objp - slabp->s_mem) / cachep->buffer_size;
if (objnr) {
- objp = slabp->s_mem + (objnr - 1) * cachep->objsize;
- realobj = (char *)objp + obj_dbghead(cachep);
+ objp = slabp->s_mem + (objnr - 1) * cachep->buffer_size;
+ realobj = (char *)objp + obj_offset(cachep);
printk(KERN_ERR "Prev obj: start=%p, len=%d\n",
realobj, size);
print_objinfo(cachep, objp, 2);
}
if (objnr + 1 < cachep->num) {
- objp = slabp->s_mem + (objnr + 1) * cachep->objsize;
- realobj = (char *)objp + obj_dbghead(cachep);
+ objp = slabp->s_mem + (objnr + 1) * cachep->buffer_size;
+ realobj = (char *)objp + obj_offset(cachep);
printk(KERN_ERR "Next obj: start=%p, len=%d\n",
realobj, size);
print_objinfo(cachep, objp, 2);
@@ -1417,25 +1524,23 @@
}
#endif
-/* Destroy all the objs in a slab, and release the mem back to the system.
- * Before calling the slab must have been unlinked from the cache.
- * The cache-lock is not held/needed.
- */
-static void slab_destroy(kmem_cache_t *cachep, struct slab *slabp)
-{
- void *addr = slabp->s_mem - slabp->colouroff;
-
#if DEBUG
+/**
+ * slab_destroy_objs - call the registered destructor for each object in
+ * a slab that is to be destroyed.
+ */
+static void slab_destroy_objs(struct kmem_cache *cachep, struct slab *slabp)
+{
int i;
for (i = 0; i < cachep->num; i++) {
- void *objp = slabp->s_mem + cachep->objsize * i;
+ void *objp = slabp->s_mem + cachep->buffer_size * i;
if (cachep->flags & SLAB_POISON) {
#ifdef CONFIG_DEBUG_PAGEALLOC
- if ((cachep->objsize % PAGE_SIZE) == 0
+ if ((cachep->buffer_size % PAGE_SIZE) == 0
&& OFF_SLAB(cachep))
kernel_map_pages(virt_to_page(objp),
- cachep->objsize / PAGE_SIZE,
+ cachep->buffer_size / PAGE_SIZE,
1);
else
check_poison_obj(cachep, objp);
@@ -1452,18 +1557,32 @@
"was overwritten");
}
if (cachep->dtor && !(cachep->flags & SLAB_POISON))
- (cachep->dtor) (objp + obj_dbghead(cachep), cachep, 0);
+ (cachep->dtor) (objp + obj_offset(cachep), cachep, 0);
}
+}
#else
+static void slab_destroy_objs(struct kmem_cache *cachep, struct slab *slabp)
+{
if (cachep->dtor) {
int i;
for (i = 0; i < cachep->num; i++) {
- void *objp = slabp->s_mem + cachep->objsize * i;
+ void *objp = slabp->s_mem + cachep->buffer_size * i;
(cachep->dtor) (objp, cachep, 0);
}
}
+}
#endif
+/**
+ * Destroy all the objs in a slab, and release the mem back to the system.
+ * Before calling the slab must have been unlinked from the cache.
+ * The cache-lock is not held/needed.
+ */
+static void slab_destroy(struct kmem_cache *cachep, struct slab *slabp)
+{
+ void *addr = slabp->s_mem - slabp->colouroff;
+
+ slab_destroy_objs(cachep, slabp);
if (unlikely(cachep->flags & SLAB_DESTROY_BY_RCU)) {
struct slab_rcu *slab_rcu;
@@ -1478,9 +1597,9 @@
}
}
-/* For setting up all the kmem_list3s for cache whose objsize is same
+/* For setting up all the kmem_list3s for cache whose buffer_size is same
as size of kmem_list3. */
-static inline void set_up_list3s(kmem_cache_t *cachep, int index)
+static void set_up_list3s(struct kmem_cache *cachep, int index)
{
int node;
@@ -1493,15 +1612,20 @@
}
/**
- * calculate_slab_order - calculate size (page order) of slabs and the number
- * of objects per slab.
+ * calculate_slab_order - calculate size (page order) of slabs
+ * @cachep: pointer to the cache that is being created
+ * @size: size of objects to be created in this cache.
+ * @align: required alignment for the objects.
+ * @flags: slab allocation flags
+ *
+ * Also calculates the number of objects per slab.
*
* This could be made much more intelligent. For now, try to avoid using
* high order pages for slabs. When the gfp() functions are more friendly
* towards high-order requests, this should be changed.
*/
-static inline size_t calculate_slab_order(kmem_cache_t *cachep, size_t size,
- size_t align, gfp_t flags)
+static inline size_t calculate_slab_order(struct kmem_cache *cachep,
+ size_t size, size_t align, unsigned long flags)
{
size_t left_over = 0;
@@ -1572,13 +1696,13 @@
* cacheline. This can be beneficial if you're counting cycles as closely
* as davem.
*/
-kmem_cache_t *
+struct kmem_cache *
kmem_cache_create (const char *name, size_t size, size_t align,
- unsigned long flags, void (*ctor)(void*, kmem_cache_t *, unsigned long),
- void (*dtor)(void*, kmem_cache_t *, unsigned long))
+ unsigned long flags, void (*ctor)(void*, struct kmem_cache *, unsigned long),
+ void (*dtor)(void*, struct kmem_cache *, unsigned long))
{
size_t left_over, slab_size, ralign;
- kmem_cache_t *cachep = NULL;
+ struct kmem_cache *cachep = NULL;
struct list_head *p;
/*
@@ -1596,7 +1720,7 @@
mutex_lock(&cache_chain_mutex);
list_for_each(p, &cache_chain) {
- kmem_cache_t *pc = list_entry(p, kmem_cache_t, next);
+ struct kmem_cache *pc = list_entry(p, struct kmem_cache, next);
mm_segment_t old_fs = get_fs();
char tmp;
int res;
@@ -1611,7 +1735,7 @@
set_fs(old_fs);
if (res) {
printk("SLAB: cache with size %d has lost its name\n",
- pc->objsize);
+ pc->buffer_size);
continue;
}
@@ -1696,20 +1820,20 @@
align = ralign;
/* Get cache's description obj. */
- cachep = (kmem_cache_t *) kmem_cache_alloc(&cache_cache, SLAB_KERNEL);
+ cachep = kmem_cache_alloc(&cache_cache, SLAB_KERNEL);
if (!cachep)
goto oops;
- memset(cachep, 0, sizeof(kmem_cache_t));
+ memset(cachep, 0, sizeof(struct kmem_cache));
#if DEBUG
- cachep->reallen = size;
+ cachep->obj_size = size;
if (flags & SLAB_RED_ZONE) {
/* redzoning only works with word aligned caches */
align = BYTES_PER_WORD;
/* add space for red zone words */
- cachep->dbghead += BYTES_PER_WORD;
+ cachep->obj_offset += BYTES_PER_WORD;
size += 2 * BYTES_PER_WORD;
}
if (flags & SLAB_STORE_USER) {
@@ -1722,8 +1846,8 @@
}
#if FORCED_DEBUG && defined(CONFIG_DEBUG_PAGEALLOC)
if (size >= malloc_sizes[INDEX_L3 + 1].cs_size
- && cachep->reallen > cache_line_size() && size < PAGE_SIZE) {
- cachep->dbghead += PAGE_SIZE - size;
+ && cachep->obj_size > cache_line_size() && size < PAGE_SIZE) {
+ cachep->obj_offset += PAGE_SIZE - size;
size = PAGE_SIZE;
}
#endif
@@ -1786,7 +1910,7 @@
if (flags & SLAB_CACHE_DMA)
cachep->gfpflags |= GFP_DMA;
spin_lock_init(&cachep->spinlock);
- cachep->objsize = size;
+ cachep->buffer_size = size;
if (flags & CFLGS_OFF_SLAB)
cachep->slabp_cache = kmem_find_general_cachep(slab_size, 0u);
@@ -1843,11 +1967,11 @@
jiffies + REAPTIMEOUT_LIST3 +
((unsigned long)cachep) % REAPTIMEOUT_LIST3;
- BUG_ON(!ac_data(cachep));
- ac_data(cachep)->avail = 0;
- ac_data(cachep)->limit = BOOT_CPUCACHE_ENTRIES;
- ac_data(cachep)->batchcount = 1;
- ac_data(cachep)->touched = 0;
+ BUG_ON(!cpu_cache_get(cachep));
+ cpu_cache_get(cachep)->avail = 0;
+ cpu_cache_get(cachep)->limit = BOOT_CPUCACHE_ENTRIES;
+ cpu_cache_get(cachep)->batchcount = 1;
+ cpu_cache_get(cachep)->touched = 0;
cachep->batchcount = 1;
cachep->limit = BOOT_CPUCACHE_ENTRIES;
}
@@ -1875,7 +1999,7 @@
BUG_ON(irqs_disabled());
}
-static void check_spinlock_acquired(kmem_cache_t *cachep)
+static void check_spinlock_acquired(struct kmem_cache *cachep)
{
#ifdef CONFIG_SMP
check_irq_off();
@@ -1883,7 +2007,7 @@
#endif
}
-static inline void check_spinlock_acquired_node(kmem_cache_t *cachep, int node)
+static void check_spinlock_acquired_node(struct kmem_cache *cachep, int node)
{
#ifdef CONFIG_SMP
check_irq_off();
@@ -1916,45 +2040,43 @@
preempt_enable();
}
-static void drain_array_locked(kmem_cache_t *cachep, struct array_cache *ac,
+static void drain_array_locked(struct kmem_cache *cachep, struct array_cache *ac,
int force, int node);
static void do_drain(void *arg)
{
- kmem_cache_t *cachep = (kmem_cache_t *) arg;
+ struct kmem_cache *cachep = (struct kmem_cache *) arg;
struct array_cache *ac;
int node = numa_node_id();
check_irq_off();
- ac = ac_data(cachep);
+ ac = cpu_cache_get(cachep);
spin_lock(&cachep->nodelists[node]->list_lock);
free_block(cachep, ac->entry, ac->avail, node);
spin_unlock(&cachep->nodelists[node]->list_lock);
ac->avail = 0;
}
-static void drain_cpu_caches(kmem_cache_t *cachep)
+static void drain_cpu_caches(struct kmem_cache *cachep)
{
struct kmem_list3 *l3;
int node;
smp_call_function_all_cpus(do_drain, cachep);
check_irq_on();
- spin_lock_irq(&cachep->spinlock);
for_each_online_node(node) {
l3 = cachep->nodelists[node];
if (l3) {
- spin_lock(&l3->list_lock);
+ spin_lock_irq(&l3->list_lock);
drain_array_locked(cachep, l3->shared, 1, node);
- spin_unlock(&l3->list_lock);
+ spin_unlock_irq(&l3->list_lock);
if (l3->alien)
- drain_alien_cache(cachep, l3);
+ drain_alien_cache(cachep, l3->alien);
}
}
- spin_unlock_irq(&cachep->spinlock);
}
-static int __node_shrink(kmem_cache_t *cachep, int node)
+static int __node_shrink(struct kmem_cache *cachep, int node)
{
struct slab *slabp;
struct kmem_list3 *l3 = cachep->nodelists[node];
@@ -1983,7 +2105,7 @@
return ret;
}
-static int __cache_shrink(kmem_cache_t *cachep)
+static int __cache_shrink(struct kmem_cache *cachep)
{
int ret = 0, i = 0;
struct kmem_list3 *l3;
@@ -2009,7 +2131,7 @@
* Releases as many slabs as possible for a cache.
* To help debugging, a zero exit status indicates all slabs were released.
*/
-int kmem_cache_shrink(kmem_cache_t *cachep)
+int kmem_cache_shrink(struct kmem_cache *cachep)
{
if (!cachep || in_interrupt())
BUG();
@@ -2022,7 +2144,7 @@
* kmem_cache_destroy - delete a cache
* @cachep: the cache to destroy
*
- * Remove a kmem_cache_t object from the slab cache.
+ * Remove a struct kmem_cache object from the slab cache.
* Returns 0 on success.
*
* It is expected this function will be called by a module when it is
@@ -2035,7 +2157,7 @@
* The caller must guarantee that noone will allocate memory from the cache
* during the kmem_cache_destroy().
*/
-int kmem_cache_destroy(kmem_cache_t *cachep)
+int kmem_cache_destroy(struct kmem_cache *cachep)
{
int i;
struct kmem_list3 *l3;
@@ -2086,7 +2208,7 @@
EXPORT_SYMBOL(kmem_cache_destroy);
/* Get the memory for a slab management obj. */
-static struct slab *alloc_slabmgmt(kmem_cache_t *cachep, void *objp,
+static struct slab *alloc_slabmgmt(struct kmem_cache *cachep, void *objp,
int colour_off, gfp_t local_flags)
{
struct slab *slabp;
@@ -2112,13 +2234,13 @@
return (kmem_bufctl_t *) (slabp + 1);
}
-static void cache_init_objs(kmem_cache_t *cachep,
+static void cache_init_objs(struct kmem_cache *cachep,
struct slab *slabp, unsigned long ctor_flags)
{
int i;
for (i = 0; i < cachep->num; i++) {
- void *objp = slabp->s_mem + cachep->objsize * i;
+ void *objp = slabp->s_mem + cachep->buffer_size * i;
#if DEBUG
/* need to poison the objs? */
if (cachep->flags & SLAB_POISON)
@@ -2136,7 +2258,7 @@
* Otherwise, deadlock. They must also be threaded.
*/
if (cachep->ctor && !(cachep->flags & SLAB_POISON))
- cachep->ctor(objp + obj_dbghead(cachep), cachep,
+ cachep->ctor(objp + obj_offset(cachep), cachep,
ctor_flags);
if (cachep->flags & SLAB_RED_ZONE) {
@@ -2147,10 +2269,10 @@
slab_error(cachep, "constructor overwrote the"
" start of an object");
}
- if ((cachep->objsize % PAGE_SIZE) == 0 && OFF_SLAB(cachep)
+ if ((cachep->buffer_size % PAGE_SIZE) == 0 && OFF_SLAB(cachep)
&& cachep->flags & SLAB_POISON)
kernel_map_pages(virt_to_page(objp),
- cachep->objsize / PAGE_SIZE, 0);
+ cachep->buffer_size / PAGE_SIZE, 0);
#else
if (cachep->ctor)
cachep->ctor(objp, cachep, ctor_flags);
@@ -2161,7 +2283,7 @@
slabp->free = 0;
}
-static void kmem_flagcheck(kmem_cache_t *cachep, gfp_t flags)
+static void kmem_flagcheck(struct kmem_cache *cachep, gfp_t flags)
{
if (flags & SLAB_DMA) {
if (!(cachep->gfpflags & GFP_DMA))
@@ -2172,7 +2294,43 @@
}
}
-static void set_slab_attr(kmem_cache_t *cachep, struct slab *slabp, void *objp)
+static void *slab_get_obj(struct kmem_cache *cachep, struct slab *slabp, int nodeid)
+{
+ void *objp = slabp->s_mem + (slabp->free * cachep->buffer_size);
+ kmem_bufctl_t next;
+
+ slabp->inuse++;
+ next = slab_bufctl(slabp)[slabp->free];
+#if DEBUG
+ slab_bufctl(slabp)[slabp->free] = BUFCTL_FREE;
+ WARN_ON(slabp->nodeid != nodeid);
+#endif
+ slabp->free = next;
+
+ return objp;
+}
+
+static void slab_put_obj(struct kmem_cache *cachep, struct slab *slabp, void *objp,
+ int nodeid)
+{
+ unsigned int objnr = (unsigned)(objp-slabp->s_mem) / cachep->buffer_size;
+
+#if DEBUG
+ /* Verify that the slab belongs to the intended node */
+ WARN_ON(slabp->nodeid != nodeid);
+
+ if (slab_bufctl(slabp)[objnr] != BUFCTL_FREE) {
+ printk(KERN_ERR "slab: double free detected in cache "
+ "'%s', objp %p\n", cachep->name, objp);
+ BUG();
+ }
+#endif
+ slab_bufctl(slabp)[objnr] = slabp->free;
+ slabp->free = objnr;
+ slabp->inuse--;
+}
+
+static void set_slab_attr(struct kmem_cache *cachep, struct slab *slabp, void *objp)
{
int i;
struct page *page;
@@ -2191,7 +2349,7 @@
* Grow (by 1) the number of slabs within a cache. This is called by
* kmem_cache_alloc() when there are no active objs left in a cache.
*/
-static int cache_grow(kmem_cache_t *cachep, gfp_t flags, int nodeid)
+static int cache_grow(struct kmem_cache *cachep, gfp_t flags, int nodeid)
{
struct slab *slabp;
void *objp;
@@ -2217,20 +2375,20 @@
*/
ctor_flags |= SLAB_CTOR_ATOMIC;
- /* About to mess with non-constant members - lock. */
+ /* Take the l3 list lock to change the colour_next on this node */
check_irq_off();
- spin_lock(&cachep->spinlock);
+ l3 = cachep->nodelists[nodeid];
+ spin_lock(&l3->list_lock);
/* Get colour for the slab, and cal the next value. */
- offset = cachep->colour_next;
- cachep->colour_next++;
- if (cachep->colour_next >= cachep->colour)
- cachep->colour_next = 0;
+ offset = l3->colour_next;
+ l3->colour_next++;
+ if (l3->colour_next >= cachep->colour)
+ l3->colour_next = 0;
+ spin_unlock(&l3->list_lock);
+
offset *= cachep->colour_off;
- spin_unlock(&cachep->spinlock);
-
- check_irq_off();
if (local_flags & __GFP_WAIT)
local_irq_enable();
@@ -2260,7 +2418,6 @@
if (local_flags & __GFP_WAIT)
local_irq_disable();
check_irq_off();
- l3 = cachep->nodelists[nodeid];
spin_lock(&l3->list_lock);
/* Make slab active. */
@@ -2302,14 +2459,14 @@
}
}
-static void *cache_free_debugcheck(kmem_cache_t *cachep, void *objp,
+static void *cache_free_debugcheck(struct kmem_cache *cachep, void *objp,
void *caller)
{
struct page *page;
unsigned int objnr;
struct slab *slabp;
- objp -= obj_dbghead(cachep);
+ objp -= obj_offset(cachep);
kfree_debugcheck(objp);
page = virt_to_page(objp);
@@ -2341,31 +2498,31 @@
if (cachep->flags & SLAB_STORE_USER)
*dbg_userword(cachep, objp) = caller;
- objnr = (objp - slabp->s_mem) / cachep->objsize;
+ objnr = (unsigned)(objp - slabp->s_mem) / cachep->buffer_size;
BUG_ON(objnr >= cachep->num);
- BUG_ON(objp != slabp->s_mem + objnr * cachep->objsize);
+ BUG_ON(objp != slabp->s_mem + objnr * cachep->buffer_size);
if (cachep->flags & SLAB_DEBUG_INITIAL) {
/* Need to call the slab's constructor so the
* caller can perform a verify of its state (debugging).
* Called without the cache-lock held.
*/
- cachep->ctor(objp + obj_dbghead(cachep),
+ cachep->ctor(objp + obj_offset(cachep),
cachep, SLAB_CTOR_CONSTRUCTOR | SLAB_CTOR_VERIFY);
}
if (cachep->flags & SLAB_POISON && cachep->dtor) {
/* we want to cache poison the object,
* call the destruction callback
*/
- cachep->dtor(objp + obj_dbghead(cachep), cachep, 0);
+ cachep->dtor(objp + obj_offset(cachep), cachep, 0);
}
if (cachep->flags & SLAB_POISON) {
#ifdef CONFIG_DEBUG_PAGEALLOC
- if ((cachep->objsize % PAGE_SIZE) == 0 && OFF_SLAB(cachep)) {
+ if ((cachep->buffer_size % PAGE_SIZE) == 0 && OFF_SLAB(cachep)) {
store_stackinfo(cachep, objp, (unsigned long)caller);
kernel_map_pages(virt_to_page(objp),
- cachep->objsize / PAGE_SIZE, 0);
+ cachep->buffer_size / PAGE_SIZE, 0);
} else {
poison_obj(cachep, objp, POISON_FREE);
}
@@ -2376,7 +2533,7 @@
return objp;
}
-static void check_slabp(kmem_cache_t *cachep, struct slab *slabp)
+static void check_slabp(struct kmem_cache *cachep, struct slab *slabp)
{
kmem_bufctl_t i;
int entries = 0;
@@ -2409,14 +2566,14 @@
#define check_slabp(x,y) do { } while(0)
#endif
-static void *cache_alloc_refill(kmem_cache_t *cachep, gfp_t flags)
+static void *cache_alloc_refill(struct kmem_cache *cachep, gfp_t flags)
{
int batchcount;
struct kmem_list3 *l3;
struct array_cache *ac;
check_irq_off();
- ac = ac_data(cachep);
+ ac = cpu_cache_get(cachep);
retry:
batchcount = ac->batchcount;
if (!ac->touched && batchcount > BATCHREFILL_LIMIT) {
@@ -2461,22 +2618,12 @@
check_slabp(cachep, slabp);
check_spinlock_acquired(cachep);
while (slabp->inuse < cachep->num && batchcount--) {
- kmem_bufctl_t next;
STATS_INC_ALLOCED(cachep);
STATS_INC_ACTIVE(cachep);
STATS_SET_HIGH(cachep);
- /* get obj pointer */
- ac->entry[ac->avail++] = slabp->s_mem +
- slabp->free * cachep->objsize;
-
- slabp->inuse++;
- next = slab_bufctl(slabp)[slabp->free];
-#if DEBUG
- slab_bufctl(slabp)[slabp->free] = BUFCTL_FREE;
- WARN_ON(numa_node_id() != slabp->nodeid);
-#endif
- slabp->free = next;
+ ac->entry[ac->avail++] = slab_get_obj(cachep, slabp,
+ numa_node_id());
}
check_slabp(cachep, slabp);
@@ -2498,7 +2645,7 @@
x = cache_grow(cachep, flags, numa_node_id());
// cache_grow can reenable interrupts, then ac could change.
- ac = ac_data(cachep);
+ ac = cpu_cache_get(cachep);
if (!x && ac->avail == 0) // no objects in sight? abort
return NULL;
@@ -2510,7 +2657,7 @@
}
static inline void
-cache_alloc_debugcheck_before(kmem_cache_t *cachep, gfp_t flags)
+cache_alloc_debugcheck_before(struct kmem_cache *cachep, gfp_t flags)
{
might_sleep_if(flags & __GFP_WAIT);
#if DEBUG
@@ -2519,16 +2666,16 @@
}
#if DEBUG
-static void *cache_alloc_debugcheck_after(kmem_cache_t *cachep, gfp_t flags,
+static void *cache_alloc_debugcheck_after(struct kmem_cache *cachep, gfp_t flags,
void *objp, void *caller)
{
if (!objp)
return objp;
if (cachep->flags & SLAB_POISON) {
#ifdef CONFIG_DEBUG_PAGEALLOC
- if ((cachep->objsize % PAGE_SIZE) == 0 && OFF_SLAB(cachep))
+ if ((cachep->buffer_size % PAGE_SIZE) == 0 && OFF_SLAB(cachep))
kernel_map_pages(virt_to_page(objp),
- cachep->objsize / PAGE_SIZE, 1);
+ cachep->buffer_size / PAGE_SIZE, 1);
else
check_poison_obj(cachep, objp);
#else
@@ -2553,7 +2700,7 @@
*dbg_redzone1(cachep, objp) = RED_ACTIVE;
*dbg_redzone2(cachep, objp) = RED_ACTIVE;
}
- objp += obj_dbghead(cachep);
+ objp += obj_offset(cachep);
if (cachep->ctor && cachep->flags & SLAB_POISON) {
unsigned long ctor_flags = SLAB_CTOR_CONSTRUCTOR;
@@ -2568,7 +2715,7 @@
#define cache_alloc_debugcheck_after(a,b,objp,d) (objp)
#endif
-static inline void *____cache_alloc(kmem_cache_t *cachep, gfp_t flags)
+static inline void *____cache_alloc(struct kmem_cache *cachep, gfp_t flags)
{
void *objp;
struct array_cache *ac;
@@ -2583,7 +2730,7 @@
#endif
check_irq_off();
- ac = ac_data(cachep);
+ ac = cpu_cache_get(cachep);
if (likely(ac->avail)) {
STATS_INC_ALLOCHIT(cachep);
ac->touched = 1;
@@ -2595,7 +2742,8 @@
return objp;
}
-static inline void *__cache_alloc(kmem_cache_t *cachep, gfp_t flags)
+static __always_inline void *
+__cache_alloc(struct kmem_cache *cachep, gfp_t flags, void *caller)
{
unsigned long save_flags;
void *objp;
@@ -2606,7 +2754,7 @@
objp = ____cache_alloc(cachep, flags);
local_irq_restore(save_flags);
objp = cache_alloc_debugcheck_after(cachep, flags, objp,
- __builtin_return_address(0));
+ caller);
prefetchw(objp);
return objp;
}
@@ -2615,19 +2763,19 @@
/*
* A interface to enable slab creation on nodeid
*/
-static void *__cache_alloc_node(kmem_cache_t *cachep, gfp_t flags, int nodeid)
+static void *__cache_alloc_node(struct kmem_cache *cachep, gfp_t flags, int nodeid)
{
struct list_head *entry;
struct slab *slabp;
struct kmem_list3 *l3;
void *obj;
- kmem_bufctl_t next;
int x;
l3 = cachep->nodelists[nodeid];
BUG_ON(!l3);
retry:
+ check_irq_off();
spin_lock(&l3->list_lock);
entry = l3->slabs_partial.next;
if (entry == &l3->slabs_partial) {
@@ -2647,14 +2795,7 @@
BUG_ON(slabp->inuse == cachep->num);
- /* get obj pointer */
- obj = slabp->s_mem + slabp->free * cachep->objsize;
- slabp->inuse++;
- next = slab_bufctl(slabp)[slabp->free];
-#if DEBUG
- slab_bufctl(slabp)[slabp->free] = BUFCTL_FREE;
-#endif
- slabp->free = next;
+ obj = slab_get_obj(cachep, slabp, nodeid);
check_slabp(cachep, slabp);
l3->free_objects--;
/* move slabp to correct slabp list: */
@@ -2685,7 +2826,7 @@
/*
* Caller needs to acquire correct kmem_list's list_lock
*/
-static void free_block(kmem_cache_t *cachep, void **objpp, int nr_objects,
+static void free_block(struct kmem_cache *cachep, void **objpp, int nr_objects,
int node)
{
int i;
@@ -2694,29 +2835,14 @@
for (i = 0; i < nr_objects; i++) {
void *objp = objpp[i];
struct slab *slabp;
- unsigned int objnr;
- slabp = page_get_slab(virt_to_page(objp));
+ slabp = virt_to_slab(objp);
l3 = cachep->nodelists[node];
list_del(&slabp->list);
- objnr = (objp - slabp->s_mem) / cachep->objsize;
check_spinlock_acquired_node(cachep, node);
check_slabp(cachep, slabp);
-
-#if DEBUG
- /* Verify that the slab belongs to the intended node */
- WARN_ON(slabp->nodeid != node);
-
- if (slab_bufctl(slabp)[objnr] != BUFCTL_FREE) {
- printk(KERN_ERR "slab: double free detected in cache "
- "'%s', objp %p\n", cachep->name, objp);
- BUG();
- }
-#endif
- slab_bufctl(slabp)[objnr] = slabp->free;
- slabp->free = objnr;
+ slab_put_obj(cachep, slabp, objp, node);
STATS_DEC_ACTIVE(cachep);
- slabp->inuse--;
l3->free_objects++;
check_slabp(cachep, slabp);
@@ -2738,7 +2864,7 @@
}
}
-static void cache_flusharray(kmem_cache_t *cachep, struct array_cache *ac)
+static void cache_flusharray(struct kmem_cache *cachep, struct array_cache *ac)
{
int batchcount;
struct kmem_list3 *l3;
@@ -2797,9 +2923,9 @@
*
* Called with disabled ints.
*/
-static inline void __cache_free(kmem_cache_t *cachep, void *objp)
+static inline void __cache_free(struct kmem_cache *cachep, void *objp)
{
- struct array_cache *ac = ac_data(cachep);
+ struct array_cache *ac = cpu_cache_get(cachep);
check_irq_off();
objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
@@ -2810,7 +2936,7 @@
#ifdef CONFIG_NUMA
{
struct slab *slabp;
- slabp = page_get_slab(virt_to_page(objp));
+ slabp = virt_to_slab(objp);
if (unlikely(slabp->nodeid != numa_node_id())) {
struct array_cache *alien = NULL;
int nodeid = slabp->nodeid;
@@ -2856,9 +2982,9 @@
* Allocate an object from this cache. The flags are only relevant
* if the cache has no available objects.
*/
-void *kmem_cache_alloc(kmem_cache_t *cachep, gfp_t flags)
+void *kmem_cache_alloc(struct kmem_cache *cachep, gfp_t flags)
{
- return __cache_alloc(cachep, flags);
+ return __cache_alloc(cachep, flags, __builtin_return_address(0));
}
EXPORT_SYMBOL(kmem_cache_alloc);
@@ -2876,12 +3002,12 @@
*
* Currently only used for dentry validation.
*/
-int fastcall kmem_ptr_validate(kmem_cache_t *cachep, void *ptr)
+int fastcall kmem_ptr_validate(struct kmem_cache *cachep, void *ptr)
{
unsigned long addr = (unsigned long)ptr;
unsigned long min_addr = PAGE_OFFSET;
unsigned long align_mask = BYTES_PER_WORD - 1;
- unsigned long size = cachep->objsize;
+ unsigned long size = cachep->buffer_size;
struct page *page;
if (unlikely(addr < min_addr))
@@ -2917,32 +3043,23 @@
* New and improved: it will now make sure that the object gets
* put on the correct node list so that there is no false sharing.
*/
-void *kmem_cache_alloc_node(kmem_cache_t *cachep, gfp_t flags, int nodeid)
+void *kmem_cache_alloc_node(struct kmem_cache *cachep, gfp_t flags, int nodeid)
{
unsigned long save_flags;
void *ptr;
- if (nodeid == -1)
- return __cache_alloc(cachep, flags);
-
- if (unlikely(!cachep->nodelists[nodeid])) {
- /* Fall back to __cache_alloc if we run into trouble */
- printk(KERN_WARNING
- "slab: not allocating in inactive node %d for cache %s\n",
- nodeid, cachep->name);
- return __cache_alloc(cachep, flags);
- }
-
cache_alloc_debugcheck_before(cachep, flags);
local_irq_save(save_flags);
- if (nodeid == numa_node_id())
+
+ if (nodeid == -1 || nodeid == numa_node_id() ||
+ !cachep->nodelists[nodeid])
ptr = ____cache_alloc(cachep, flags);
else
ptr = __cache_alloc_node(cachep, flags, nodeid);
local_irq_restore(save_flags);
- ptr =
- cache_alloc_debugcheck_after(cachep, flags, ptr,
- __builtin_return_address(0));
+
+ ptr = cache_alloc_debugcheck_after(cachep, flags, ptr,
+ __builtin_return_address(0));
return ptr;
}
@@ -2950,7 +3067,7 @@
void *kmalloc_node(size_t size, gfp_t flags, int node)
{
- kmem_cache_t *cachep;
+ struct kmem_cache *cachep;
cachep = kmem_find_general_cachep(size, flags);
if (unlikely(cachep == NULL))
@@ -2981,9 +3098,10 @@
* platforms. For example, on i386, it means that the memory must come
* from the first 16MB.
*/
-void *__kmalloc(size_t size, gfp_t flags)
+static __always_inline void *__do_kmalloc(size_t size, gfp_t flags,
+ void *caller)
{
- kmem_cache_t *cachep;
+ struct kmem_cache *cachep;
/* If you want to save a few bytes .text space: replace
* __ with kmem_.
@@ -2993,10 +3111,27 @@
cachep = __find_general_cachep(size, flags);
if (unlikely(cachep == NULL))
return NULL;
- return __cache_alloc(cachep, flags);
+ return __cache_alloc(cachep, flags, caller);
+}
+
+#ifndef CONFIG_DEBUG_SLAB
+
+void *__kmalloc(size_t size, gfp_t flags)
+{
+ return __do_kmalloc(size, flags, NULL);
}
EXPORT_SYMBOL(__kmalloc);
+#else
+
+void *__kmalloc_track_caller(size_t size, gfp_t flags, void *caller)
+{
+ return __do_kmalloc(size, flags, caller);
+}
+EXPORT_SYMBOL(__kmalloc_track_caller);
+
+#endif
+
#ifdef CONFIG_SMP
/**
* __alloc_percpu - allocate one copy of the object for every present
@@ -3054,7 +3189,7 @@
* Free an object which was previously allocated from this
* cache.
*/
-void kmem_cache_free(kmem_cache_t *cachep, void *objp)
+void kmem_cache_free(struct kmem_cache *cachep, void *objp)
{
unsigned long flags;
@@ -3075,15 +3210,15 @@
*/
void kfree(const void *objp)
{
- kmem_cache_t *c;
+ struct kmem_cache *c;
unsigned long flags;
if (unlikely(!objp))
return;
local_irq_save(flags);
kfree_debugcheck(objp);
- c = page_get_cache(virt_to_page(objp));
- mutex_debug_check_no_locks_freed(objp, obj_reallen(c));
+ c = virt_to_cache(objp);
+ mutex_debug_check_no_locks_freed(objp, obj_size(c));
__cache_free(c, (void *)objp);
local_irq_restore(flags);
}
@@ -3112,13 +3247,13 @@
EXPORT_SYMBOL(free_percpu);
#endif
-unsigned int kmem_cache_size(kmem_cache_t *cachep)
+unsigned int kmem_cache_size(struct kmem_cache *cachep)
{
- return obj_reallen(cachep);
+ return obj_size(cachep);
}
EXPORT_SYMBOL(kmem_cache_size);
-const char *kmem_cache_name(kmem_cache_t *cachep)
+const char *kmem_cache_name(struct kmem_cache *cachep)
{
return cachep->name;
}
@@ -3127,7 +3262,7 @@
/*
* This initializes kmem_list3 for all nodes.
*/
-static int alloc_kmemlist(kmem_cache_t *cachep)
+static int alloc_kmemlist(struct kmem_cache *cachep)
{
int node;
struct kmem_list3 *l3;
@@ -3183,7 +3318,7 @@
}
struct ccupdate_struct {
- kmem_cache_t *cachep;
+ struct kmem_cache *cachep;
struct array_cache *new[NR_CPUS];
};
@@ -3193,13 +3328,13 @@
struct array_cache *old;
check_irq_off();
- old = ac_data(new->cachep);
+ old = cpu_cache_get(new->cachep);
new->cachep->array[smp_processor_id()] = new->new[smp_processor_id()];
new->new[smp_processor_id()] = old;
}
-static int do_tune_cpucache(kmem_cache_t *cachep, int limit, int batchcount,
+static int do_tune_cpucache(struct kmem_cache *cachep, int limit, int batchcount,
int shared)
{
struct ccupdate_struct new;
@@ -3220,11 +3355,11 @@
smp_call_function_all_cpus(do_ccupdate_local, (void *)&new);
check_irq_on();
- spin_lock_irq(&cachep->spinlock);
+ spin_lock(&cachep->spinlock);
cachep->batchcount = batchcount;
cachep->limit = limit;
cachep->shared = shared;
- spin_unlock_irq(&cachep->spinlock);
+ spin_unlock(&cachep->spinlock);
for_each_online_cpu(i) {
struct array_cache *ccold = new.new[i];
@@ -3245,7 +3380,7 @@
return 0;
}
-static void enable_cpucache(kmem_cache_t *cachep)
+static void enable_cpucache(struct kmem_cache *cachep)
{
int err;
int limit, shared;
@@ -3258,13 +3393,13 @@
* The numbers are guessed, we should auto-tune as described by
* Bonwick.
*/
- if (cachep->objsize > 131072)
+ if (cachep->buffer_size > 131072)
limit = 1;
- else if (cachep->objsize > PAGE_SIZE)
+ else if (cachep->buffer_size > PAGE_SIZE)
limit = 8;
- else if (cachep->objsize > 1024)
+ else if (cachep->buffer_size > 1024)
limit = 24;
- else if (cachep->objsize > 256)
+ else if (cachep->buffer_size > 256)
limit = 54;
else
limit = 120;
@@ -3279,7 +3414,7 @@
*/
shared = 0;
#ifdef CONFIG_SMP
- if (cachep->objsize <= PAGE_SIZE)
+ if (cachep->buffer_size <= PAGE_SIZE)
shared = 8;
#endif
@@ -3297,7 +3432,7 @@
cachep->name, -err);
}
-static void drain_array_locked(kmem_cache_t *cachep, struct array_cache *ac,
+static void drain_array_locked(struct kmem_cache *cachep, struct array_cache *ac,
int force, int node)
{
int tofree;
@@ -3342,12 +3477,12 @@
}
list_for_each(walk, &cache_chain) {
- kmem_cache_t *searchp;
+ struct kmem_cache *searchp;
struct list_head *p;
int tofree;
struct slab *slabp;
- searchp = list_entry(walk, kmem_cache_t, next);
+ searchp = list_entry(walk, struct kmem_cache, next);
if (searchp->flags & SLAB_NO_REAP)
goto next;
@@ -3356,10 +3491,10 @@
l3 = searchp->nodelists[numa_node_id()];
if (l3->alien)
- drain_alien_cache(searchp, l3);
+ drain_alien_cache(searchp, l3->alien);
spin_lock_irq(&l3->list_lock);
- drain_array_locked(searchp, ac_data(searchp), 0,
+ drain_array_locked(searchp, cpu_cache_get(searchp), 0,
numa_node_id());
if (time_after(l3->next_reap, jiffies))
@@ -3450,15 +3585,15 @@
if (p == &cache_chain)
return NULL;
}
- return list_entry(p, kmem_cache_t, next);
+ return list_entry(p, struct kmem_cache, next);
}
static void *s_next(struct seq_file *m, void *p, loff_t *pos)
{
- kmem_cache_t *cachep = p;
+ struct kmem_cache *cachep = p;
++*pos;
return cachep->next.next == &cache_chain ? NULL
- : list_entry(cachep->next.next, kmem_cache_t, next);
+ : list_entry(cachep->next.next, struct kmem_cache, next);
}
static void s_stop(struct seq_file *m, void *p)
@@ -3468,7 +3603,7 @@
static int s_show(struct seq_file *m, void *p)
{
- kmem_cache_t *cachep = p;
+ struct kmem_cache *cachep = p;
struct list_head *q;
struct slab *slabp;
unsigned long active_objs;
@@ -3480,8 +3615,7 @@
int node;
struct kmem_list3 *l3;
- check_irq_on();
- spin_lock_irq(&cachep->spinlock);
+ spin_lock(&cachep->spinlock);
active_objs = 0;
num_slabs = 0;
for_each_online_node(node) {
@@ -3489,7 +3623,8 @@
if (!l3)
continue;
- spin_lock(&l3->list_lock);
+ check_irq_on();
+ spin_lock_irq(&l3->list_lock);
list_for_each(q, &l3->slabs_full) {
slabp = list_entry(q, struct slab, list);
@@ -3514,9 +3649,10 @@
num_slabs++;
}
free_objects += l3->free_objects;
- shared_avail += l3->shared->avail;
+ if (l3->shared)
+ shared_avail += l3->shared->avail;
- spin_unlock(&l3->list_lock);
+ spin_unlock_irq(&l3->list_lock);
}
num_slabs += active_slabs;
num_objs = num_slabs * cachep->num;
@@ -3528,7 +3664,7 @@
printk(KERN_ERR "slab: cache %s error: %s\n", name, error);
seq_printf(m, "%-17s %6lu %6lu %6u %4u %4d",
- name, active_objs, num_objs, cachep->objsize,
+ name, active_objs, num_objs, cachep->buffer_size,
cachep->num, (1 << cachep->gfporder));
seq_printf(m, " : tunables %4u %4u %4u",
cachep->limit, cachep->batchcount, cachep->shared);
@@ -3560,7 +3696,7 @@
}
#endif
seq_putc(m, '\n');
- spin_unlock_irq(&cachep->spinlock);
+ spin_unlock(&cachep->spinlock);
return 0;
}
@@ -3618,7 +3754,8 @@
mutex_lock(&cache_chain_mutex);
res = -EINVAL;
list_for_each(p, &cache_chain) {
- kmem_cache_t *cachep = list_entry(p, kmem_cache_t, next);
+ struct kmem_cache *cachep = list_entry(p, struct kmem_cache,
+ next);
if (!strcmp(cachep->name, kbuf)) {
if (limit < 1 ||
@@ -3656,5 +3793,5 @@
if (unlikely(objp == NULL))
return 0;
- return obj_reallen(page_get_cache(virt_to_page(objp)));
+ return obj_size(virt_to_cache(objp));
}
diff --git a/mm/slob.c b/mm/slob.c
index 1c240c4..a1f42bd 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -336,7 +336,7 @@
#ifdef CONFIG_SMP
-void *__alloc_percpu(size_t size, size_t align)
+void *__alloc_percpu(size_t size)
{
int i;
struct percpu_data *pdata = kmalloc(sizeof (*pdata), GFP_KERNEL);
diff --git a/mm/swap.c b/mm/swap.c
index bc2442a7..7624742 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -34,19 +34,22 @@
/* How many pages do we try to swap or page in/out together? */
int page_cluster;
+static void put_compound_page(struct page *page)
+{
+ page = (struct page *)page_private(page);
+ if (put_page_testzero(page)) {
+ void (*dtor)(struct page *page);
+
+ dtor = (void (*)(struct page *))page[1].mapping;
+ (*dtor)(page);
+ }
+}
+
void put_page(struct page *page)
{
- if (unlikely(PageCompound(page))) {
- page = (struct page *)page_private(page);
- if (put_page_testzero(page)) {
- void (*dtor)(struct page *page);
-
- dtor = (void (*)(struct page *))page[1].mapping;
- (*dtor)(page);
- }
- return;
- }
- if (put_page_testzero(page))
+ if (unlikely(PageCompound(page)))
+ put_compound_page(page);
+ else if (put_page_testzero(page))
__page_cache_release(page);
}
EXPORT_SYMBOL(put_page);
@@ -244,6 +247,15 @@
struct page *page = pages[i];
struct zone *pagezone;
+ if (unlikely(PageCompound(page))) {
+ if (zone) {
+ spin_unlock_irq(&zone->lru_lock);
+ zone = NULL;
+ }
+ put_compound_page(page);
+ continue;
+ }
+
if (!put_page_testzero(page))
continue;
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 7b09ac5..db8a3d3 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -27,6 +27,7 @@
.writepage = swap_writepage,
.sync_page = block_sync_page,
.set_page_dirty = __set_page_dirty_nobuffers,
+ .migratepage = migrate_page,
};
static struct backing_dev_info swap_backing_dev_info = {
diff --git a/mm/swapfile.c b/mm/swapfile.c
index f1e69c3..1f9cf0d 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -554,6 +554,15 @@
return 0;
}
+#ifdef CONFIG_MIGRATION
+int remove_vma_swap(struct vm_area_struct *vma, struct page *page)
+{
+ swp_entry_t entry = { .val = page_private(page) };
+
+ return unuse_vma(vma, entry, page);
+}
+#endif
+
/*
* Scan swap_map from current position to next entry still in use.
* Recycle to start on reaching the end, returning 0 when empty.
@@ -646,6 +655,7 @@
*/
swap_map = &si->swap_map[i];
entry = swp_entry(type, i);
+again:
page = read_swap_cache_async(entry, NULL, 0);
if (!page) {
/*
@@ -680,6 +690,12 @@
wait_on_page_locked(page);
wait_on_page_writeback(page);
lock_page(page);
+ if (!PageSwapCache(page)) {
+ /* Page migration has occured */
+ unlock_page(page);
+ page_cache_release(page);
+ goto again;
+ }
wait_on_page_writeback(page);
/*
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 2e34b61..5a61080 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -477,7 +477,13 @@
* processes. Try to unmap it here.
*/
if (page_mapped(page) && mapping) {
- switch (try_to_unmap(page)) {
+ /*
+ * No unmapping if we do not swap
+ */
+ if (!sc->may_swap)
+ goto keep_locked;
+
+ switch (try_to_unmap(page, 0)) {
case SWAP_FAIL:
goto activate_locked;
case SWAP_AGAIN:
@@ -492,7 +498,7 @@
goto keep_locked;
if (!may_enter_fs)
goto keep_locked;
- if (laptop_mode && !sc->may_writepage)
+ if (!sc->may_writepage)
goto keep_locked;
/* Page is dirty, try to write it out here */
@@ -609,6 +615,15 @@
}
/*
+ * Non migratable page
+ */
+int fail_migrate_page(struct page *newpage, struct page *page)
+{
+ return -EIO;
+}
+EXPORT_SYMBOL(fail_migrate_page);
+
+/*
* swapout a single page
* page is locked upon entry, unlocked on exit
*/
@@ -617,7 +632,7 @@
struct address_space *mapping = page_mapping(page);
if (page_mapped(page) && mapping)
- if (try_to_unmap(page) != SWAP_SUCCESS)
+ if (try_to_unmap(page, 0) != SWAP_SUCCESS)
goto unlock_retry;
if (PageDirty(page)) {
@@ -653,6 +668,167 @@
retry:
return -EAGAIN;
}
+EXPORT_SYMBOL(swap_page);
+
+/*
+ * Page migration was first developed in the context of the memory hotplug
+ * project. The main authors of the migration code are:
+ *
+ * IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
+ * Hirokazu Takahashi <taka@valinux.co.jp>
+ * Dave Hansen <haveblue@us.ibm.com>
+ * Christoph Lameter <clameter@sgi.com>
+ */
+
+/*
+ * Remove references for a page and establish the new page with the correct
+ * basic settings to be able to stop accesses to the page.
+ */
+int migrate_page_remove_references(struct page *newpage,
+ struct page *page, int nr_refs)
+{
+ struct address_space *mapping = page_mapping(page);
+ struct page **radix_pointer;
+
+ /*
+ * Avoid doing any of the following work if the page count
+ * indicates that the page is in use or truncate has removed
+ * the page.
+ */
+ if (!mapping || page_mapcount(page) + nr_refs != page_count(page))
+ return 1;
+
+ /*
+ * Establish swap ptes for anonymous pages or destroy pte
+ * maps for files.
+ *
+ * In order to reestablish file backed mappings the fault handlers
+ * will take the radix tree_lock which may then be used to stop
+ * processses from accessing this page until the new page is ready.
+ *
+ * A process accessing via a swap pte (an anonymous page) will take a
+ * page_lock on the old page which will block the process until the
+ * migration attempt is complete. At that time the PageSwapCache bit
+ * will be examined. If the page was migrated then the PageSwapCache
+ * bit will be clear and the operation to retrieve the page will be
+ * retried which will find the new page in the radix tree. Then a new
+ * direct mapping may be generated based on the radix tree contents.
+ *
+ * If the page was not migrated then the PageSwapCache bit
+ * is still set and the operation may continue.
+ */
+ try_to_unmap(page, 1);
+
+ /*
+ * Give up if we were unable to remove all mappings.
+ */
+ if (page_mapcount(page))
+ return 1;
+
+ write_lock_irq(&mapping->tree_lock);
+
+ radix_pointer = (struct page **)radix_tree_lookup_slot(
+ &mapping->page_tree,
+ page_index(page));
+
+ if (!page_mapping(page) || page_count(page) != nr_refs ||
+ *radix_pointer != page) {
+ write_unlock_irq(&mapping->tree_lock);
+ return 1;
+ }
+
+ /*
+ * Now we know that no one else is looking at the page.
+ *
+ * Certain minimal information about a page must be available
+ * in order for other subsystems to properly handle the page if they
+ * find it through the radix tree update before we are finished
+ * copying the page.
+ */
+ get_page(newpage);
+ newpage->index = page->index;
+ newpage->mapping = page->mapping;
+ if (PageSwapCache(page)) {
+ SetPageSwapCache(newpage);
+ set_page_private(newpage, page_private(page));
+ }
+
+ *radix_pointer = newpage;
+ __put_page(page);
+ write_unlock_irq(&mapping->tree_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(migrate_page_remove_references);
+
+/*
+ * Copy the page to its new location
+ */
+void migrate_page_copy(struct page *newpage, struct page *page)
+{
+ copy_highpage(newpage, page);
+
+ if (PageError(page))
+ SetPageError(newpage);
+ if (PageReferenced(page))
+ SetPageReferenced(newpage);
+ if (PageUptodate(page))
+ SetPageUptodate(newpage);
+ if (PageActive(page))
+ SetPageActive(newpage);
+ if (PageChecked(page))
+ SetPageChecked(newpage);
+ if (PageMappedToDisk(page))
+ SetPageMappedToDisk(newpage);
+
+ if (PageDirty(page)) {
+ clear_page_dirty_for_io(page);
+ set_page_dirty(newpage);
+ }
+
+ ClearPageSwapCache(page);
+ ClearPageActive(page);
+ ClearPagePrivate(page);
+ set_page_private(page, 0);
+ page->mapping = NULL;
+
+ /*
+ * If any waiters have accumulated on the new page then
+ * wake them up.
+ */
+ if (PageWriteback(newpage))
+ end_page_writeback(newpage);
+}
+EXPORT_SYMBOL(migrate_page_copy);
+
+/*
+ * Common logic to directly migrate a single page suitable for
+ * pages that do not use PagePrivate.
+ *
+ * Pages are locked upon entry and exit.
+ */
+int migrate_page(struct page *newpage, struct page *page)
+{
+ BUG_ON(PageWriteback(page)); /* Writeback must be complete */
+
+ if (migrate_page_remove_references(newpage, page, 2))
+ return -EAGAIN;
+
+ migrate_page_copy(newpage, page);
+
+ /*
+ * Remove auxiliary swap entries and replace
+ * them with real ptes.
+ *
+ * Note that a real pte entry will allow processes that are not
+ * waiting on the page lock to use the new page via the page tables
+ * before the new page is unlocked.
+ */
+ remove_from_swap(newpage);
+ return 0;
+}
+EXPORT_SYMBOL(migrate_page);
+
/*
* migrate_pages
*
@@ -666,11 +842,6 @@
* are movable anymore because t has become empty
* or no retryable pages exist anymore.
*
- * SIMPLIFIED VERSION: This implementation of migrate_pages
- * is only swapping out pages and never touches the second
- * list. The direct migration patchset
- * extends this function to avoid the use of swap.
- *
* Return: Number of pages not migrated when "to" ran empty.
*/
int migrate_pages(struct list_head *from, struct list_head *to,
@@ -691,6 +862,9 @@
retry = 0;
list_for_each_entry_safe(page, page2, from, lru) {
+ struct page *newpage = NULL;
+ struct address_space *mapping;
+
cond_resched();
rc = 0;
@@ -698,6 +872,9 @@
/* page was freed from under us. So we are done. */
goto next;
+ if (to && list_empty(to))
+ break;
+
/*
* Skip locked pages during the first two passes to give the
* functions holding the lock time to release the page. Later we
@@ -734,12 +911,69 @@
}
}
+ if (!to) {
+ rc = swap_page(page);
+ goto next;
+ }
+
+ newpage = lru_to_page(to);
+ lock_page(newpage);
+
/*
- * Page is properly locked and writeback is complete.
+ * Pages are properly locked and writeback is complete.
* Try to migrate the page.
*/
- rc = swap_page(page);
- goto next;
+ mapping = page_mapping(page);
+ if (!mapping)
+ goto unlock_both;
+
+ if (mapping->a_ops->migratepage) {
+ rc = mapping->a_ops->migratepage(newpage, page);
+ goto unlock_both;
+ }
+
+ /*
+ * Trigger writeout if page is dirty
+ */
+ if (PageDirty(page)) {
+ switch (pageout(page, mapping)) {
+ case PAGE_KEEP:
+ case PAGE_ACTIVATE:
+ goto unlock_both;
+
+ case PAGE_SUCCESS:
+ unlock_page(newpage);
+ goto next;
+
+ case PAGE_CLEAN:
+ ; /* try to migrate the page below */
+ }
+ }
+ /*
+ * If we have no buffer or can release the buffer
+ * then do a simple migration.
+ */
+ if (!page_has_buffers(page) ||
+ try_to_release_page(page, GFP_KERNEL)) {
+ rc = migrate_page(newpage, page);
+ goto unlock_both;
+ }
+
+ /*
+ * On early passes with mapped pages simply
+ * retry. There may be a lock held for some
+ * buffers that may go away. Later
+ * swap them out.
+ */
+ if (pass > 4) {
+ unlock_page(newpage);
+ newpage = NULL;
+ rc = swap_page(page);
+ goto next;
+ }
+
+unlock_both:
+ unlock_page(newpage);
unlock_page:
unlock_page(page);
@@ -752,7 +986,10 @@
list_move(&page->lru, failed);
nr_failed++;
} else {
- /* Success */
+ if (newpage) {
+ /* Successful migration. Return page to LRU */
+ move_to_lru(newpage);
+ }
list_move(&page->lru, moved);
}
}
@@ -1170,7 +1407,7 @@
int i;
sc.gfp_mask = gfp_mask;
- sc.may_writepage = 0;
+ sc.may_writepage = !laptop_mode;
sc.may_swap = 1;
inc_page_state(allocstall);
@@ -1273,7 +1510,7 @@
total_scanned = 0;
total_reclaimed = 0;
sc.gfp_mask = GFP_KERNEL;
- sc.may_writepage = 0;
+ sc.may_writepage = !laptop_mode;
sc.may_swap = 1;
sc.nr_mapped = read_page_state(nr_mapped);
@@ -1586,40 +1823,61 @@
*/
int zone_reclaim_mode __read_mostly;
+#define RECLAIM_OFF 0
+#define RECLAIM_ZONE (1<<0) /* Run shrink_cache on the zone */
+#define RECLAIM_WRITE (1<<1) /* Writeout pages during reclaim */
+#define RECLAIM_SWAP (1<<2) /* Swap pages out during reclaim */
+#define RECLAIM_SLAB (1<<3) /* Do a global slab shrink if the zone is out of memory */
+
/*
* Mininum time between zone reclaim scans
*/
-#define ZONE_RECLAIM_INTERVAL HZ/2
+int zone_reclaim_interval __read_mostly = 30*HZ;
+
+/*
+ * Priority for ZONE_RECLAIM. This determines the fraction of pages
+ * of a node considered for each zone_reclaim. 4 scans 1/16th of
+ * a zone.
+ */
+#define ZONE_RECLAIM_PRIORITY 4
+
/*
* Try to free up some pages from this zone through reclaim.
*/
int zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order)
{
- int nr_pages = 1 << order;
+ int nr_pages;
struct task_struct *p = current;
struct reclaim_state reclaim_state;
- struct scan_control sc = {
- .gfp_mask = gfp_mask,
- .may_writepage = 0,
- .may_swap = 0,
- .nr_mapped = read_page_state(nr_mapped),
- .nr_scanned = 0,
- .nr_reclaimed = 0,
- .priority = 0
- };
+ struct scan_control sc;
+ cpumask_t mask;
+ int node_id;
+
+ if (time_before(jiffies,
+ zone->last_unsuccessful_zone_reclaim + zone_reclaim_interval))
+ return 0;
if (!(gfp_mask & __GFP_WAIT) ||
- zone->zone_pgdat->node_id != numa_node_id() ||
zone->all_unreclaimable ||
atomic_read(&zone->reclaim_in_progress) > 0)
return 0;
- if (time_before(jiffies,
- zone->last_unsuccessful_zone_reclaim + ZONE_RECLAIM_INTERVAL))
- return 0;
+ node_id = zone->zone_pgdat->node_id;
+ mask = node_to_cpumask(node_id);
+ if (!cpus_empty(mask) && node_id != numa_node_id())
+ return 0;
+
+ sc.may_writepage = !!(zone_reclaim_mode & RECLAIM_WRITE);
+ sc.may_swap = !!(zone_reclaim_mode & RECLAIM_SWAP);
+ sc.nr_scanned = 0;
+ sc.nr_reclaimed = 0;
+ sc.priority = ZONE_RECLAIM_PRIORITY + 1;
+ sc.nr_mapped = read_page_state(nr_mapped);
+ sc.gfp_mask = gfp_mask;
disable_swap_token();
+ nr_pages = 1 << order;
if (nr_pages > SWAP_CLUSTER_MAX)
sc.swap_cluster_max = nr_pages;
else
@@ -1629,14 +1887,37 @@
p->flags |= PF_MEMALLOC;
reclaim_state.reclaimed_slab = 0;
p->reclaim_state = &reclaim_state;
- shrink_zone(zone, &sc);
+
+ /*
+ * Free memory by calling shrink zone with increasing priorities
+ * until we have enough memory freed.
+ */
+ do {
+ sc.priority--;
+ shrink_zone(zone, &sc);
+
+ } while (sc.nr_reclaimed < nr_pages && sc.priority > 0);
+
+ if (sc.nr_reclaimed < nr_pages && (zone_reclaim_mode & RECLAIM_SLAB)) {
+ /*
+ * shrink_slab does not currently allow us to determine
+ * how many pages were freed in the zone. So we just
+ * shake the slab and then go offnode for a single allocation.
+ *
+ * shrink_slab will free memory on all zones and may take
+ * a long time.
+ */
+ shrink_slab(sc.nr_scanned, gfp_mask, order);
+ sc.nr_reclaimed = 1; /* Avoid getting the off node timeout */
+ }
+
p->reclaim_state = NULL;
current->flags &= ~PF_MEMALLOC;
if (sc.nr_reclaimed == 0)
zone->last_unsuccessful_zone_reclaim = jiffies;
- return sc.nr_reclaimed > nr_pages;
+ return sc.nr_reclaimed >= nr_pages;
}
#endif
diff --git a/net/802/psnap.c b/net/802/psnap.c
index 4d63894..34e4296 100644
--- a/net/802/psnap.c
+++ b/net/802/psnap.c
@@ -59,8 +59,10 @@
proto = find_snap_client(skb->h.raw);
if (proto) {
/* Pass the frame on. */
+ u8 *hdr = skb->data;
skb->h.raw += 5;
skb_pull(skb, 5);
+ skb_postpull_rcsum(skb, hdr, 5);
rc = proto->rcvfunc(skb, dev, &snap_packet_type, orig_dev);
} else {
skb->sk = NULL;
diff --git a/net/Kconfig b/net/Kconfig
index bc603d9..5126f58 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -27,6 +27,13 @@
menu "Networking options"
+config NETDEBUG
+ bool "Network packet debugging"
+ help
+ You can say Y here if you want to get additional messages useful in
+ debugging bad packets, but can overwhelm logs under denial of service
+ attacks.
+
source "net/packet/Kconfig"
source "net/unix/Kconfig"
source "net/xfrm/Kconfig"
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index ba44288..da687c8 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -104,6 +104,7 @@
{
struct net_device *dev = p->dev;
+ dev->br_port = NULL;
p->br = NULL;
p->dev = NULL;
dev_put(dev);
@@ -118,13 +119,24 @@
destroy_nbp(p);
}
-/* called with RTNL */
+/* Delete port(interface) from bridge is done in two steps.
+ * via RCU. First step, marks device as down. That deletes
+ * all the timers and stops new packets from flowing through.
+ *
+ * Final cleanup doesn't occur until after all CPU's finished
+ * processing packets.
+ *
+ * Protected from multiple admin operations by RTNL mutex
+ */
static void del_nbp(struct net_bridge_port *p)
{
struct net_bridge *br = p->br;
struct net_device *dev = p->dev;
- dev->br_port = NULL;
+ /* Race between RTNL notify and RCU callback */
+ if (p->deleted)
+ return;
+
dev_set_promiscuity(dev, -1);
cancel_delayed_work(&p->carrier_check);
@@ -132,16 +144,13 @@
spin_lock_bh(&br->lock);
br_stp_disable_port(p);
+ p->deleted = 1;
spin_unlock_bh(&br->lock);
br_fdb_delete_by_port(br, p);
list_del_rcu(&p->list);
- del_timer_sync(&p->message_age_timer);
- del_timer_sync(&p->forward_delay_timer);
- del_timer_sync(&p->hold_timer);
-
call_rcu(&p->rcu, destroy_nbp_rcu);
}
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index c5bd631..e330b17 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -68,6 +68,7 @@
/* STP */
u8 priority;
u8 state;
+ u8 deleted;
u16 port_no;
unsigned char topology_change_ack;
unsigned char config_pending;
diff --git a/net/bridge/netfilter/ebt_ulog.c b/net/bridge/netfilter/ebt_ulog.c
index ce617b3..802baf7 100644
--- a/net/bridge/netfilter/ebt_ulog.c
+++ b/net/bridge/netfilter/ebt_ulog.c
@@ -46,7 +46,7 @@
#define PRINTR(format, args...) do { if (net_ratelimit()) \
printk(format , ## args); } while (0)
-static unsigned int nlbufsiz = 4096;
+static unsigned int nlbufsiz = NLMSG_GOODSIZE;
module_param(nlbufsiz, uint, 0600);
MODULE_PARM_DESC(nlbufsiz, "netlink buffer size (number of bytes) "
"(defaults to 4096)");
@@ -98,12 +98,14 @@
static struct sk_buff *ulog_alloc_skb(unsigned int size)
{
struct sk_buff *skb;
+ unsigned int n;
- skb = alloc_skb(nlbufsiz, GFP_ATOMIC);
+ n = max(size, nlbufsiz);
+ skb = alloc_skb(n, GFP_ATOMIC);
if (!skb) {
PRINTR(KERN_ERR "ebt_ulog: can't alloc whole buffer "
- "of size %ub!\n", nlbufsiz);
- if (size < nlbufsiz) {
+ "of size %ub!\n", n);
+ if (n > size) {
/* try to allocate only as much as we need for
* current packet */
skb = alloc_skb(size, GFP_ATOMIC);
diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 00729b3..cbd4020 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -934,6 +934,13 @@
BUGPRINT("Entries_size never zero\n");
return -EINVAL;
}
+ /* overflow check */
+ if (tmp.nentries >= ((INT_MAX - sizeof(struct ebt_table_info)) / NR_CPUS -
+ SMP_CACHE_BYTES) / sizeof(struct ebt_counter))
+ return -ENOMEM;
+ if (tmp.num_counters >= INT_MAX / sizeof(struct ebt_counter))
+ return -ENOMEM;
+
countersize = COUNTER_OFFSET(tmp.nentries) *
(highest_possible_processor_id()+1);
newinfo = (struct ebt_table_info *)
diff --git a/net/core/dev.c b/net/core/dev.c
index fd070a0..2afb0de 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2543,13 +2543,14 @@
case SIOCBONDENSLAVE:
case SIOCBONDRELEASE:
case SIOCBONDSETHWADDR:
- case SIOCBONDSLAVEINFOQUERY:
- case SIOCBONDINFOQUERY:
case SIOCBONDCHANGEACTIVE:
case SIOCBRADDIF:
case SIOCBRDELIF:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ /* fall through */
+ case SIOCBONDSLAVEINFOQUERY:
+ case SIOCBONDINFOQUERY:
dev_load(ifr.ifr_name);
rtnl_lock();
ret = dev_ifsioc(&ifr, cmd);
@@ -3236,7 +3237,7 @@
* Initialise the packet receive queues.
*/
- for (i = 0; i < NR_CPUS; i++) {
+ for_each_cpu(i) {
struct softnet_data *queue;
queue = &per_cpu(softnet_data, i);
diff --git a/net/core/filter.c b/net/core/filter.c
index 9540946..93fbd01 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -64,7 +64,7 @@
}
/**
- * sk_run_filter - run a filter on a socket
+ * sk_run_filter - run a filter on a socket
* @skb: buffer to run the filter on
* @filter: filter to apply
* @flen: length of filter
@@ -78,8 +78,8 @@
{
struct sock_filter *fentry; /* We walk down these */
void *ptr;
- u32 A = 0; /* Accumulator */
- u32 X = 0; /* Index Register */
+ u32 A = 0; /* Accumulator */
+ u32 X = 0; /* Index Register */
u32 mem[BPF_MEMWORDS]; /* Scratch Memory Store */
u32 tmp;
int k;
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index d0732e9..6766f11 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -135,13 +135,15 @@
struct sk_buff *__alloc_skb(unsigned int size, gfp_t gfp_mask,
int fclone)
{
+ kmem_cache_t *cache;
struct skb_shared_info *shinfo;
struct sk_buff *skb;
u8 *data;
+ cache = fclone ? skbuff_fclone_cache : skbuff_head_cache;
+
/* Get the HEAD */
- skb = kmem_cache_alloc(fclone ? skbuff_fclone_cache : skbuff_head_cache,
- gfp_mask & ~__GFP_DMA);
+ skb = kmem_cache_alloc(cache, gfp_mask & ~__GFP_DMA);
if (!skb)
goto out;
@@ -180,7 +182,7 @@
out:
return skb;
nodata:
- kmem_cache_free(skbuff_head_cache, skb);
+ kmem_cache_free(cache, skb);
skb = NULL;
goto out;
}
diff --git a/net/core/utils.c b/net/core/utils.c
index ac1d1fc..fdc4f38 100644
--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -121,7 +121,7 @@
{
int i;
- for (i = 0; i < NR_CPUS; i++) {
+ for_each_cpu(i) {
struct nrnd_state *state = &per_cpu(net_rand_state,i);
__net_srandom(state, i+jiffies);
}
@@ -133,7 +133,7 @@
unsigned long seed[NR_CPUS];
get_random_bytes(seed, sizeof(seed));
- for (i = 0; i < NR_CPUS; i++) {
+ for_each_cpu(i) {
struct nrnd_state *state = &per_cpu(net_rand_state,i);
__net_srandom(state, seed[i]);
}
diff --git a/net/dccp/ccids/lib/tfrc_equation.c b/net/dccp/ccids/lib/tfrc_equation.c
index d2b5933..add3cae 100644
--- a/net/dccp/ccids/lib/tfrc_equation.c
+++ b/net/dccp/ccids/lib/tfrc_equation.c
@@ -15,7 +15,6 @@
#include <linux/config.h>
#include <linux/module.h>
-#include <asm/bug.h>
#include <asm/div64.h>
#include "tfrc.h"
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index 00f9832..dc0487b 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -119,7 +119,8 @@
if (err != 0)
goto failure;
- err = ip_route_newports(&rt, inet->sport, inet->dport, sk);
+ err = ip_route_newports(&rt, IPPROTO_DCCP, inet->sport, inet->dport,
+ sk);
if (err != 0)
goto failure;
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index df07425..80c4d04 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -468,6 +468,7 @@
done:
if (opt && opt != np->opt)
sock_kfree_s(sk, opt, opt->tot_len);
+ dst_release(dst);
return err;
}
diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c
index 7a12180..960aa78 100644
--- a/net/ieee80211/ieee80211_rx.c
+++ b/net/ieee80211/ieee80211_rx.c
@@ -350,6 +350,7 @@
u8 src[ETH_ALEN];
struct ieee80211_crypt_data *crypt = NULL;
int keyidx = 0;
+ int can_be_decrypted = 0;
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
@@ -410,12 +411,23 @@
return 1;
}
- if (is_multicast_ether_addr(hdr->addr1)
- ? ieee->host_mc_decrypt : ieee->host_decrypt) {
+ can_be_decrypted = (is_multicast_ether_addr(hdr->addr1) ||
+ is_broadcast_ether_addr(hdr->addr2)) ?
+ ieee->host_mc_decrypt : ieee->host_decrypt;
+
+ if (can_be_decrypted) {
int idx = 0;
- if (skb->len >= hdrlen + 3)
+ if (skb->len >= hdrlen + 3) {
+ /* Top two-bits of byte 3 are the key index */
idx = skb->data[hdrlen + 3] >> 6;
+ }
+
+ /* ieee->crypt[] is WEP_KEY (4) in length. Given that idx
+ * is only allowed 2-bits of storage, no value of idx can
+ * be provided via above code that would result in idx
+ * being out of range */
crypt = ieee->crypt[idx];
+
#ifdef NOT_YET
sta = NULL;
@@ -553,7 +565,7 @@
/* skb: hdr + (possibly fragmented, possibly encrypted) payload */
- if (ieee->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) &&
+ if ((fc & IEEE80211_FCTL_PROTECTED) && can_be_decrypted &&
(keyidx = ieee80211_rx_frame_decrypt(ieee, skb, crypt)) < 0)
goto rx_dropped;
@@ -617,7 +629,7 @@
/* skb: hdr + (possible reassembled) full MSDU payload; possibly still
* encrypted/authenticated */
- if (ieee->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) &&
+ if ((fc & IEEE80211_FCTL_PROTECTED) && can_be_decrypted &&
ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt))
goto rx_dropped;
@@ -1439,7 +1451,7 @@
break;
case IEEE80211_STYPE_PROBE_REQ:
- IEEE80211_DEBUG_MGMT("recieved auth (%d)\n",
+ IEEE80211_DEBUG_MGMT("received auth (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu
(header->frame_ctl)));
@@ -1473,7 +1485,7 @@
break;
case IEEE80211_STYPE_AUTH:
- IEEE80211_DEBUG_MGMT("recieved auth (%d)\n",
+ IEEE80211_DEBUG_MGMT("received auth (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu
(header->frame_ctl)));
diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c
index 23e1630..f87c6b8 100644
--- a/net/ieee80211/ieee80211_wx.c
+++ b/net/ieee80211/ieee80211_wx.c
@@ -232,15 +232,18 @@
return start;
}
+#define SCAN_ITEM_SIZE 128
+
int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
struct ieee80211_network *network;
unsigned long flags;
+ int err = 0;
char *ev = extra;
- char *stop = ev + IW_SCAN_MAX_DATA;
+ char *stop = ev + wrqu->data.length;
int i = 0;
IEEE80211_DEBUG_WX("Getting scan\n");
@@ -249,6 +252,11 @@
list_for_each_entry(network, &ieee->network_list, list) {
i++;
+ if (stop - ev < SCAN_ITEM_SIZE) {
+ err = -E2BIG;
+ break;
+ }
+
if (ieee->scan_age == 0 ||
time_after(network->last_scanned + ieee->scan_age, jiffies))
ev = ipw2100_translate_scan(ieee, ev, stop, network);
@@ -270,7 +278,7 @@
IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i);
- return 0;
+ return err;
}
int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 105039e..4d1c409 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -385,7 +385,7 @@
u32 daddr;
if (ip_options_echo(&icmp_param->replyopts, skb))
- goto out;
+ return;
if (icmp_xmit_lock())
return;
@@ -416,7 +416,6 @@
ip_rt_put(rt);
out_unlock:
icmp_xmit_unlock();
-out:;
}
@@ -525,7 +524,7 @@
iph->tos;
if (ip_options_echo(&icmp_param.replyopts, skb_in))
- goto ende;
+ goto out_unlock;
/*
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index d8ce713..64ce52b 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -970,7 +970,7 @@
case IGMP_MTRACE_RESP:
break;
default:
- NETDEBUG(KERN_DEBUG "New IGMP type=%d, why we do not know about it?\n", ih->type);
+ break;
}
drop:
@@ -1578,7 +1578,7 @@
new_in = psf->sf_count[MCAST_INCLUDE] != 0;
if (new_in) {
if (!psf->sf_oldin) {
- struct ip_sf_list *prev = 0;
+ struct ip_sf_list *prev = NULL;
for (dpsf=pmc->tomb; dpsf; dpsf=dpsf->sf_next) {
if (dpsf->sf_inaddr == psf->sf_inaddr)
diff --git a/net/ipv4/multipath_wrandom.c b/net/ipv4/multipath_wrandom.c
index d34a9fa..342d0b9 100644
--- a/net/ipv4/multipath_wrandom.c
+++ b/net/ipv4/multipath_wrandom.c
@@ -228,7 +228,7 @@
struct multipath_dest *d, *target_dest = NULL;
/* store the weight information for a certain route */
- spin_lock(&state[state_idx].lock);
+ spin_lock_bh(&state[state_idx].lock);
/* find state entry for gateway or add one if necessary */
list_for_each_entry_rcu(r, &state[state_idx].head, list) {
@@ -276,7 +276,7 @@
* we are finished
*/
- spin_unlock(&state[state_idx].lock);
+ spin_unlock_bh(&state[state_idx].lock);
}
static void __multipath_free(struct rcu_head *head)
@@ -302,7 +302,7 @@
for (i = 0; i < MULTIPATH_STATE_SIZE; ++i) {
struct multipath_route *r;
- spin_lock(&state[i].lock);
+ spin_lock_bh(&state[i].lock);
list_for_each_entry_rcu(r, &state[i].head, list) {
struct multipath_dest *d;
list_for_each_entry_rcu(d, &r->dests, list) {
@@ -315,7 +315,7 @@
__multipath_free);
}
- spin_unlock(&state[i].lock);
+ spin_unlock_bh(&state[i].lock);
}
}
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index afe3d8f..dd1048b 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -807,6 +807,13 @@
if (len != sizeof(tmp) + tmp.size)
return -ENOPROTOOPT;
+ /* overflow check */
+ if (tmp.size >= (INT_MAX - sizeof(struct xt_table_info)) / NR_CPUS -
+ SMP_CACHE_BYTES)
+ return -ENOMEM;
+ if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters))
+ return -ENOMEM;
+
newinfo = xt_alloc_table_info(tmp.size);
if (!newinfo)
return -ENOMEM;
diff --git a/net/ipv4/netfilter/ip_conntrack_netlink.c b/net/ipv4/netfilter/ip_conntrack_netlink.c
index c9ebbe0..e0b5926 100644
--- a/net/ipv4/netfilter/ip_conntrack_netlink.c
+++ b/net/ipv4/netfilter/ip_conntrack_netlink.c
@@ -1216,7 +1216,7 @@
b = skb->tail;
- type |= NFNL_SUBSYS_CTNETLINK << 8;
+ type |= NFNL_SUBSYS_CTNETLINK_EXP << 8;
nlh = NLMSG_PUT(skb, 0, 0, type, sizeof(struct nfgenmsg));
nfmsg = NLMSG_DATA(nlh);
@@ -1567,6 +1567,7 @@
};
MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_CTNETLINK);
+MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_CTNETLINK_EXP);
static int __init ctnetlink_init(void)
{
diff --git a/net/ipv4/netfilter/ip_conntrack_tftp.c b/net/ipv4/netfilter/ip_conntrack_tftp.c
index d3c5a37..4ba4463 100644
--- a/net/ipv4/netfilter/ip_conntrack_tftp.c
+++ b/net/ipv4/netfilter/ip_conntrack_tftp.c
@@ -71,6 +71,7 @@
exp->tuple = ct->tuplehash[IP_CT_DIR_REPLY].tuple;
exp->mask.src.ip = 0xffffffff;
+ exp->mask.src.u.udp.port = 0;
exp->mask.dst.ip = 0xffffffff;
exp->mask.dst.u.udp.port = 0xffff;
exp->mask.dst.protonum = 0xff;
diff --git a/net/ipv4/netfilter/ip_nat_standalone.c b/net/ipv4/netfilter/ip_nat_standalone.c
index ad438fb..92c5499 100644
--- a/net/ipv4/netfilter/ip_nat_standalone.c
+++ b/net/ipv4/netfilter/ip_nat_standalone.c
@@ -209,8 +209,8 @@
&& (ct = ip_conntrack_get(*pskb, &ctinfo)) != NULL) {
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
- if (ct->tuplehash[dir].tuple.src.ip !=
- ct->tuplehash[!dir].tuple.dst.ip) {
+ if (ct->tuplehash[dir].tuple.dst.ip !=
+ ct->tuplehash[!dir].tuple.src.ip) {
dst_release((*pskb)->dst);
(*pskb)->dst = NULL;
}
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index 2371b20..16f47c6 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -921,6 +921,13 @@
if (len != sizeof(tmp) + tmp.size)
return -ENOPROTOOPT;
+ /* overflow check */
+ if (tmp.size >= (INT_MAX - sizeof(struct xt_table_info)) / NR_CPUS -
+ SMP_CACHE_BYTES)
+ return -ENOMEM;
+ if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters))
+ return -ENOMEM;
+
newinfo = xt_alloc_table_info(tmp.size);
if (!newinfo)
return -ENOMEM;
diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c
index 641dbc4..180a9ea 100644
--- a/net/ipv4/netfilter/ipt_ULOG.c
+++ b/net/ipv4/netfilter/ipt_ULOG.c
@@ -35,6 +35,10 @@
* each nlgroup you are using, so the total kernel memory usage increases
* by that factor.
*
+ * Actually you should use nlbufsiz a bit smaller than PAGE_SIZE, since
+ * nlbufsiz is used with alloc_skb, which adds another
+ * sizeof(struct skb_shared_info). Use NLMSG_GOODSIZE instead.
+ *
* flushtimeout:
* Specify, after how many hundredths of a second the queue should be
* flushed even if it is not full yet.
@@ -76,7 +80,7 @@
#define PRINTR(format, args...) do { if (net_ratelimit()) printk(format , ## args); } while (0)
-static unsigned int nlbufsiz = 4096;
+static unsigned int nlbufsiz = NLMSG_GOODSIZE;
module_param(nlbufsiz, uint, 0400);
MODULE_PARM_DESC(nlbufsiz, "netlink buffer size");
@@ -143,22 +147,26 @@
static struct sk_buff *ulog_alloc_skb(unsigned int size)
{
struct sk_buff *skb;
+ unsigned int n;
/* alloc skb which should be big enough for a whole
* multipart message. WARNING: has to be <= 131000
* due to slab allocator restrictions */
- skb = alloc_skb(nlbufsiz, GFP_ATOMIC);
+ n = max(size, nlbufsiz);
+ skb = alloc_skb(n, GFP_ATOMIC);
if (!skb) {
- PRINTR("ipt_ULOG: can't alloc whole buffer %ub!\n",
- nlbufsiz);
+ PRINTR("ipt_ULOG: can't alloc whole buffer %ub!\n", n);
- /* try to allocate only as much as we need for
- * current packet */
+ if (n > size) {
+ /* try to allocate only as much as we need for
+ * current packet */
- skb = alloc_skb(size, GFP_ATOMIC);
- if (!skb)
- PRINTR("ipt_ULOG: can't even allocate %ub\n", size);
+ skb = alloc_skb(size, GFP_ATOMIC);
+ if (!skb)
+ PRINTR("ipt_ULOG: can't even allocate %ub\n",
+ size);
+ }
}
return skb;
diff --git a/net/ipv4/netfilter/ipt_policy.c b/net/ipv4/netfilter/ipt_policy.c
index 18ca825..5a7a265 100644
--- a/net/ipv4/netfilter/ipt_policy.c
+++ b/net/ipv4/netfilter/ipt_policy.c
@@ -26,10 +26,13 @@
static inline int
match_xfrm_state(struct xfrm_state *x, const struct ipt_policy_elem *e)
{
-#define MATCH(x,y) (!e->match.x || ((e->x == (y)) ^ e->invert.x))
+#define MATCH_ADDR(x,y,z) (!e->match.x || \
+ ((e->x.a4.s_addr == (e->y.a4.s_addr & (z))) \
+ ^ e->invert.x))
+#define MATCH(x,y) (!e->match.x || ((e->x == (y)) ^ e->invert.x))
- return MATCH(saddr, x->props.saddr.a4 & e->smask) &&
- MATCH(daddr, x->id.daddr.a4 & e->dmask) &&
+ return MATCH_ADDR(saddr, smask, x->props.saddr.a4) &&
+ MATCH_ADDR(daddr, dmask, x->id.daddr.a4) &&
MATCH(proto, x->id.proto) &&
MATCH(mode, x->props.mode) &&
MATCH(spi, x->id.spi) &&
@@ -89,7 +92,7 @@
return 0;
}
- return strict ? 1 : 0;
+ return strict ? i == info->len : 0;
}
static int match(const struct sk_buff *skb,
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 39d49dc..1b167c4b 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -49,7 +49,7 @@
int res = 0;
int cpu;
- for (cpu = 0; cpu < NR_CPUS; cpu++)
+ for_each_cpu(cpu)
res += proto->stats[cpu].inuse;
return res;
diff --git a/net/ipv4/tcp_htcp.c b/net/ipv4/tcp_htcp.c
index 3284cfb..128de4d 100644
--- a/net/ipv4/tcp_htcp.c
+++ b/net/ipv4/tcp_htcp.c
@@ -230,7 +230,6 @@
if (tp->snd_cwnd < tp->snd_cwnd_clamp)
tp->snd_cwnd++;
tp->snd_cwnd_cnt = 0;
- ca->ccount++;
}
}
}
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 6ea3539..233bdf2 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -236,7 +236,7 @@
if (err)
goto failure;
- err = ip_route_newports(&rt, inet->sport, inet->dport, sk);
+ err = ip_route_newports(&rt, IPPROTO_TCP, inet->sport, inet->dport, sk);
if (err)
goto failure;
@@ -1845,7 +1845,6 @@
}
EXPORT_SYMBOL(ipv4_specific);
-EXPORT_SYMBOL(inet_bind_bucket_create);
EXPORT_SYMBOL(tcp_hashinfo);
EXPORT_SYMBOL(tcp_prot);
EXPORT_SYMBOL(tcp_unhash);
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 42196ba..45f7ae5 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -8,7 +8,6 @@
*
*/
-#include <asm/bug.h>
#include <linux/compiler.h>
#include <linux/config.h>
#include <linux/inetdevice.h>
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index d328d59..b7d8822 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -2165,6 +2165,9 @@
dev->name);
break;
}
+
+ if (idev)
+ idev->if_flags |= IF_READY;
} else {
if (!netif_carrier_ok(dev)) {
/* device is still not ready. */
@@ -3321,9 +3324,7 @@
switch (event) {
case RTM_NEWADDR:
- dst_hold(&ifp->rt->u.dst);
- if (ip6_ins_rt(ifp->rt, NULL, NULL, NULL))
- dst_release(&ifp->rt->u.dst);
+ ip6_ins_rt(ifp->rt, NULL, NULL, NULL);
if (ifp->idev->cnf.forwarding)
addrconf_join_anycast(ifp);
break;
@@ -3334,8 +3335,6 @@
dst_hold(&ifp->rt->u.dst);
if (ip6_del_rt(ifp->rt, NULL, NULL, NULL))
dst_free(&ifp->rt->u.dst);
- else
- dst_release(&ifp->rt->u.dst);
break;
}
}
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 064ffab..6c9711a 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -369,12 +369,6 @@
struct sk_buff *skb;
struct ipv6_txoptions *opt;
- /*
- * Release destination entry
- */
-
- sk_dst_reset(sk);
-
/* Release rx options */
if ((skb = xchg(&np->pktoptions, NULL)) != NULL)
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 6c05c79..807c021 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1252,8 +1252,7 @@
}
} else {
for (ma = idev->mc_list; ma; ma=ma->next) {
- if (group_type != IPV6_ADDR_ANY &&
- !ipv6_addr_equal(group, &ma->mca_addr))
+ if (!ipv6_addr_equal(group, &ma->mca_addr))
continue;
spin_lock_bh(&ma->mca_lock);
if (ma->mca_flags & MAF_TIMER_RUNNING) {
@@ -1268,11 +1267,10 @@
ma->mca_flags &= ~MAF_GSQUERY;
}
if (!(ma->mca_flags & MAF_GSQUERY) ||
- mld_marksources(ma, ntohs(mlh2->nsrcs), mlh2->srcs))
+ mld_marksources(ma, ntohs(mlh2->nsrcs), mlh2->srcs))
igmp6_group_queried(ma, max_delay);
spin_unlock_bh(&ma->mca_lock);
- if (group_type != IPV6_ADDR_ANY)
- break;
+ break;
}
}
read_unlock_bh(&idev->lock);
@@ -1351,7 +1349,7 @@
* in all filters
*/
if (psf->sf_count[MCAST_INCLUDE])
- return 0;
+ return type == MLD2_MODE_IS_INCLUDE;
return pmc->mca_sfcount[MCAST_EXCLUDE] ==
psf->sf_count[MCAST_EXCLUDE];
}
@@ -1966,7 +1964,7 @@
static int sf_setstate(struct ifmcaddr6 *pmc)
{
- struct ip6_sf_list *psf;
+ struct ip6_sf_list *psf, *dpsf;
int mca_xcount = pmc->mca_sfcount[MCAST_EXCLUDE];
int qrv = pmc->idev->mc_qrv;
int new_in, rv;
@@ -1978,8 +1976,48 @@
!psf->sf_count[MCAST_INCLUDE];
} else
new_in = psf->sf_count[MCAST_INCLUDE] != 0;
- if (new_in != psf->sf_oldin) {
- psf->sf_crcount = qrv;
+ if (new_in) {
+ if (!psf->sf_oldin) {
+ struct ip6_sf_list *prev = NULL;
+
+ for (dpsf=pmc->mca_tomb; dpsf;
+ dpsf=dpsf->sf_next) {
+ if (ipv6_addr_equal(&dpsf->sf_addr,
+ &psf->sf_addr))
+ break;
+ prev = dpsf;
+ }
+ if (dpsf) {
+ if (prev)
+ prev->sf_next = dpsf->sf_next;
+ else
+ pmc->mca_tomb = dpsf->sf_next;
+ kfree(dpsf);
+ }
+ psf->sf_crcount = qrv;
+ rv++;
+ }
+ } else if (psf->sf_oldin) {
+ psf->sf_crcount = 0;
+ /*
+ * add or update "delete" records if an active filter
+ * is now inactive
+ */
+ for (dpsf=pmc->mca_tomb; dpsf; dpsf=dpsf->sf_next)
+ if (ipv6_addr_equal(&dpsf->sf_addr,
+ &psf->sf_addr))
+ break;
+ if (!dpsf) {
+ dpsf = (struct ip6_sf_list *)
+ kmalloc(sizeof(*dpsf), GFP_ATOMIC);
+ if (!dpsf)
+ continue;
+ *dpsf = *psf;
+ /* pmc->mca_lock held by callers */
+ dpsf->sf_next = pmc->mca_tomb;
+ pmc->mca_tomb = dpsf;
+ }
+ dpsf->sf_crcount = qrv;
rv++;
}
}
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 847068f..74ff56c 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -978,6 +978,13 @@
if (copy_from_user(&tmp, user, sizeof(tmp)) != 0)
return -EFAULT;
+ /* overflow check */
+ if (tmp.size >= (INT_MAX - sizeof(struct xt_table_info)) / NR_CPUS -
+ SMP_CACHE_BYTES)
+ return -ENOMEM;
+ if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters))
+ return -ENOMEM;
+
newinfo = xt_alloc_table_info(tmp.size);
if (!newinfo)
return -ENOMEM;
diff --git a/net/ipv6/netfilter/ip6t_policy.c b/net/ipv6/netfilter/ip6t_policy.c
index afe1cc4..3d39ec9 100644
--- a/net/ipv6/netfilter/ip6t_policy.c
+++ b/net/ipv6/netfilter/ip6t_policy.c
@@ -26,8 +26,9 @@
static inline int
match_xfrm_state(struct xfrm_state *x, const struct ip6t_policy_elem *e)
{
-#define MATCH_ADDR(x,y,z) (!e->match.x || \
- ((ip6_masked_addrcmp((z), &e->x, &e->y)) == 0) ^ e->invert.x)
+#define MATCH_ADDR(x,y,z) (!e->match.x || \
+ ((!ip6_masked_addrcmp(&e->x.a6, &e->y.a6, z)) \
+ ^ e->invert.x))
#define MATCH(x,y) (!e->match.x || ((e->x == (y)) ^ e->invert.x))
return MATCH_ADDR(saddr, smask, (struct in6_addr *)&x->props.saddr.a6) &&
@@ -91,7 +92,7 @@
return 0;
}
- return strict ? 1 : 0;
+ return strict ? i == info->len : 0;
}
static int match(const struct sk_buff *skb,
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index 50a13e7..4238b1e 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -38,7 +38,7 @@
int res = 0;
int cpu;
- for (cpu=0; cpu<NR_CPUS; cpu++)
+ for_each_cpu(cpu)
res += proto->stats[cpu].inuse;
return res;
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 66f1d12..738376c 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -35,7 +35,6 @@
#include <linux/skbuff.h>
#include <asm/uaccess.h>
#include <asm/ioctls.h>
-#include <asm/bug.h>
#include <net/ip.h>
#include <net/sock.h>
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 66d0400..ca9cf685 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -515,6 +515,7 @@
done:
if (opt && opt != np->opt)
sock_kfree_s(sk, opt, opt->tot_len);
+ dst_release(dst);
return err;
}
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 69bd957..91cce8b 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -11,7 +11,6 @@
*
*/
-#include <asm/bug.h>
#include <linux/compiler.h>
#include <linux/config.h>
#include <linux/netdevice.h>
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 43f1ce7..ae86d23 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1620,6 +1620,7 @@
return -ENOBUFS;
hdr = (struct sadb_msg *) skb_put(skb, sizeof(struct sadb_msg));
hdr->sadb_msg_satype = pfkey_proto2satype(c->data.proto);
+ hdr->sadb_msg_type = SADB_FLUSH;
hdr->sadb_msg_seq = c->seq;
hdr->sadb_msg_pid = c->pid;
hdr->sadb_msg_version = PF_KEY_V2;
@@ -2385,6 +2386,7 @@
if (!skb_out)
return -ENOBUFS;
hdr = (struct sadb_msg *) skb_put(skb_out, sizeof(struct sadb_msg));
+ hdr->sadb_msg_type = SADB_X_SPDFLUSH;
hdr->sadb_msg_seq = c->seq;
hdr->sadb_msg_pid = c->pid;
hdr->sadb_msg_version = PF_KEY_V2;
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 62bb509..0ce337a 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -188,7 +188,7 @@
struct nf_conntrack_protocol *
__nf_ct_proto_find(u_int16_t l3proto, u_int8_t protocol)
{
- if (unlikely(nf_ct_protos[l3proto] == NULL))
+ if (unlikely(l3proto >= AF_MAX || nf_ct_protos[l3proto] == NULL))
return &nf_conntrack_generic_protocol;
return nf_ct_protos[l3proto][protocol];
diff --git a/net/netfilter/nf_conntrack_ftp.c b/net/netfilter/nf_conntrack_ftp.c
index ab0c920..6f210f3 100644
--- a/net/netfilter/nf_conntrack_ftp.c
+++ b/net/netfilter/nf_conntrack_ftp.c
@@ -657,8 +657,6 @@
/* FIXME should be configurable whether IPv4 and IPv6 FTP connections
are tracked or not - YK */
for (i = 0; i < ports_c; i++) {
- memset(&ftp[i], 0, sizeof(struct nf_conntrack_helper));
-
ftp[i][0].tuple.src.l3num = PF_INET;
ftp[i][1].tuple.src.l3num = PF_INET6;
for (j = 0; j < 2; j++) {
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 73ab16b..9ff34630 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1232,7 +1232,7 @@
b = skb->tail;
- type |= NFNL_SUBSYS_CTNETLINK << 8;
+ type |= NFNL_SUBSYS_CTNETLINK_EXP << 8;
nlh = NLMSG_PUT(skb, 0, 0, type, sizeof(struct nfgenmsg));
nfmsg = NLMSG_DATA(nlh);
@@ -1589,6 +1589,7 @@
};
MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_CTNETLINK);
+MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_CTNETLINK_EXP);
static int __init ctnetlink_init(void)
{
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index e10512e..3b3c781 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -37,7 +37,7 @@
#include "../bridge/br_private.h"
#endif
-#define NFULNL_NLBUFSIZ_DEFAULT 4096
+#define NFULNL_NLBUFSIZ_DEFAULT NLMSG_GOODSIZE
#define NFULNL_TIMEOUT_DEFAULT 100 /* every second */
#define NFULNL_QTHRESH_DEFAULT 100 /* 100 packets */
@@ -314,24 +314,28 @@
unsigned int pkt_size)
{
struct sk_buff *skb;
+ unsigned int n;
UDEBUG("entered (%u, %u)\n", inst_size, pkt_size);
/* alloc skb which should be big enough for a whole multipart
* message. WARNING: has to be <= 128k due to slab restrictions */
- skb = alloc_skb(inst_size, GFP_ATOMIC);
+ n = max(inst_size, pkt_size);
+ skb = alloc_skb(n, GFP_ATOMIC);
if (!skb) {
PRINTR("nfnetlink_log: can't alloc whole buffer (%u bytes)\n",
inst_size);
- /* try to allocate only as much as we need for current
- * packet */
+ if (n > pkt_size) {
+ /* try to allocate only as much as we need for current
+ * packet */
- skb = alloc_skb(pkt_size, GFP_ATOMIC);
- if (!skb)
- PRINTR("nfnetlink_log: can't even alloc %u bytes\n",
- pkt_size);
+ skb = alloc_skb(pkt_size, GFP_ATOMIC);
+ if (!skb)
+ PRINTR("nfnetlink_log: can't even alloc %u "
+ "bytes\n", pkt_size);
+ }
}
return skb;
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 18ed9c5..cac38b2e 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -825,7 +825,8 @@
}
if (nfqa[NFQA_MARK-1])
- skb->nfmark = ntohl(*(u_int32_t *)NFA_DATA(nfqa[NFQA_MARK-1]));
+ entry->skb->nfmark = ntohl(*(u_int32_t *)
+ NFA_DATA(nfqa[NFQA_MARK-1]));
issue_verdict(entry, verdict);
instance_put(queue);
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index ee93abc..9db7dbd 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -365,7 +365,7 @@
*/
err = -EMSGSIZE;
- if(len>dev->mtu+dev->hard_header_len)
+ if (len > dev->mtu + dev->hard_header_len)
goto out_unlock;
err = -ENOBUFS;
@@ -935,7 +935,7 @@
* Check legality
*/
- if(addr_len!=sizeof(struct sockaddr))
+ if (addr_len != sizeof(struct sockaddr))
return -EINVAL;
strlcpy(name,uaddr->sa_data,sizeof(name));
@@ -1092,7 +1092,7 @@
* retries.
*/
- if(skb==NULL)
+ if (skb == NULL)
goto out;
/*
@@ -1392,8 +1392,8 @@
if (level != SOL_PACKET)
return -ENOPROTOOPT;
- if (get_user(len,optlen))
- return -EFAULT;
+ if (get_user(len, optlen))
+ return -EFAULT;
if (len < 0)
return -EINVAL;
@@ -1419,9 +1419,9 @@
return -ENOPROTOOPT;
}
- if (put_user(len, optlen))
- return -EFAULT;
- return 0;
+ if (put_user(len, optlen))
+ return -EFAULT;
+ return 0;
}
diff --git a/net/sctp/output.c b/net/sctp/output.c
index a40991e..437cba7 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -608,7 +608,7 @@
* When a Fast Retransmit is being performed the sender SHOULD
* ignore the value of cwnd and SHOULD NOT delay retransmission.
*/
- if (!chunk->fast_retransmit)
+ if (chunk->fast_retransmit <= 0)
if (transport->flight_size >= transport->cwnd) {
retval = SCTP_XMIT_RWND_FULL;
goto finish;
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index efb72fa..f148f95 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -406,7 +406,7 @@
* chunks that are not yet acked should be added to the
* retransmit queue.
*/
- if ((fast_retransmit && chunk->fast_retransmit) ||
+ if ((fast_retransmit && (chunk->fast_retransmit > 0)) ||
(!fast_retransmit && !chunk->tsn_gap_acked)) {
/* RFC 2960 6.2.1 Processing a Received SACK
*
@@ -603,7 +603,8 @@
/* Mark the chunk as ineligible for fast retransmit
* after it is retransmitted.
*/
- chunk->fast_retransmit = 0;
+ if (chunk->fast_retransmit > 0)
+ chunk->fast_retransmit = -1;
*start_timer = 1;
q->empty = 0;
@@ -621,7 +622,8 @@
list_for_each(lchunk1, lqueue) {
chunk1 = list_entry(lchunk1, struct sctp_chunk,
transmitted_list);
- chunk1->fast_retransmit = 0;
+ if (chunk1->fast_retransmit > 0)
+ chunk1->fast_retransmit = -1;
}
}
}
@@ -1562,11 +1564,11 @@
/*
* M4) If any DATA chunk is found to have a
* 'TSN.Missing.Report'
- * value larger than or equal to 4, mark that chunk for
+ * value larger than or equal to 3, mark that chunk for
* retransmission and start the fast retransmit procedure.
*/
- if (chunk->tsn_missing_report >= 4) {
+ if (chunk->tsn_missing_report >= 3) {
chunk->fast_retransmit = 1;
do_fast_retransmit = 1;
}
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 71c9a96..2b9a832 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -884,7 +884,7 @@
{
struct sctp_transport *transport = (struct sctp_transport *) arg;
- if (asoc->overall_error_count > asoc->max_retrans) {
+ if (asoc->overall_error_count >= asoc->max_retrans) {
/* CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
SCTP_U32(SCTP_ERROR_NO_ERROR));
@@ -2122,7 +2122,7 @@
struct sctp_bind_addr *bp;
int attempts = asoc->init_err_counter + 1;
- if (attempts >= asoc->max_init_attempts) {
+ if (attempts > asoc->max_init_attempts) {
sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
SCTP_U32(SCTP_ERROR_STALE_COOKIE));
return SCTP_DISPOSITION_DELETE_TCB;
@@ -4640,7 +4640,7 @@
SCTP_DEBUG_PRINTK("Timer T1 expired (INIT).\n");
- if (attempts < asoc->max_init_attempts) {
+ if (attempts <= asoc->max_init_attempts) {
bp = (struct sctp_bind_addr *) &asoc->base.bind_addr;
repl = sctp_make_init(asoc, bp, GFP_ATOMIC, 0);
if (!repl)
@@ -4697,7 +4697,7 @@
SCTP_DEBUG_PRINTK("Timer T1 expired (COOKIE-ECHO).\n");
- if (attempts < asoc->max_init_attempts) {
+ if (attempts <= asoc->max_init_attempts) {
repl = sctp_make_cookie_echo(asoc, NULL);
if (!repl)
return SCTP_DISPOSITION_NOMEM;
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index fb1821d..0ea947e 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -5426,7 +5426,7 @@
return err;
do_error:
- if (asoc->init_err_counter + 1 >= asoc->max_init_attempts)
+ if (asoc->init_err_counter + 1 > asoc->max_init_attempts)
err = -ETIMEDOUT;
else
err = -ECONNREFUSED;
diff --git a/net/socket.c b/net/socket.c
index b38a263..a00851f 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -2078,7 +2078,7 @@
int cpu;
int counter = 0;
- for (cpu = 0; cpu < NR_CPUS; cpu++)
+ for_each_cpu(cpu)
counter += per_cpu(sockets_in_use, cpu);
/* It can be negative, by the way. 8) */
diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c
index 9ac1b8c2..8d6f1a1 100644
--- a/net/sunrpc/auth.c
+++ b/net/sunrpc/auth.c
@@ -184,7 +184,7 @@
*/
struct rpc_cred *
rpcauth_lookup_credcache(struct rpc_auth *auth, struct auth_cred * acred,
- int taskflags)
+ int flags)
{
struct rpc_cred_cache *cache = auth->au_credcache;
HLIST_HEAD(free);
@@ -193,7 +193,7 @@
*cred = NULL;
int nr = 0;
- if (!(taskflags & RPC_TASK_ROOTCREDS))
+ if (!(flags & RPCAUTH_LOOKUP_ROOTCREDS))
nr = acred->uid & RPC_CREDCACHE_MASK;
retry:
spin_lock(&rpc_credcache_lock);
@@ -202,7 +202,7 @@
hlist_for_each_safe(pos, next, &cache->hashtable[nr]) {
struct rpc_cred *entry;
entry = hlist_entry(pos, struct rpc_cred, cr_hash);
- if (entry->cr_ops->crmatch(acred, entry, taskflags)) {
+ if (entry->cr_ops->crmatch(acred, entry, flags)) {
hlist_del(&entry->cr_hash);
cred = entry;
break;
@@ -224,7 +224,7 @@
rpcauth_destroy_credlist(&free);
if (!cred) {
- new = auth->au_ops->crcreate(auth, acred, taskflags);
+ new = auth->au_ops->crcreate(auth, acred, flags);
if (!IS_ERR(new)) {
#ifdef RPC_DEBUG
new->cr_magic = RPCAUTH_CRED_MAGIC;
@@ -232,13 +232,21 @@
goto retry;
} else
cred = new;
+ } else if ((cred->cr_flags & RPCAUTH_CRED_NEW)
+ && cred->cr_ops->cr_init != NULL
+ && !(flags & RPCAUTH_LOOKUP_NEW)) {
+ int res = cred->cr_ops->cr_init(auth, cred);
+ if (res < 0) {
+ put_rpccred(cred);
+ cred = ERR_PTR(res);
+ }
}
return (struct rpc_cred *) cred;
}
struct rpc_cred *
-rpcauth_lookupcred(struct rpc_auth *auth, int taskflags)
+rpcauth_lookupcred(struct rpc_auth *auth, int flags)
{
struct auth_cred acred = {
.uid = current->fsuid,
@@ -250,7 +258,7 @@
dprintk("RPC: looking up %s cred\n",
auth->au_ops->au_name);
get_group_info(acred.group_info);
- ret = auth->au_ops->lookup_cred(auth, &acred, taskflags);
+ ret = auth->au_ops->lookup_cred(auth, &acred, flags);
put_group_info(acred.group_info);
return ret;
}
@@ -265,11 +273,14 @@
.group_info = current->group_info,
};
struct rpc_cred *ret;
+ int flags = 0;
dprintk("RPC: %4d looking up %s cred\n",
task->tk_pid, task->tk_auth->au_ops->au_name);
get_group_info(acred.group_info);
- ret = auth->au_ops->lookup_cred(auth, &acred, task->tk_flags);
+ if (task->tk_flags & RPC_TASK_ROOTCREDS)
+ flags |= RPCAUTH_LOOKUP_ROOTCREDS;
+ ret = auth->au_ops->lookup_cred(auth, &acred, flags);
if (!IS_ERR(ret))
task->tk_msg.rpc_cred = ret;
else
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 8d78228..bb46efd 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -158,6 +158,7 @@
old = gss_cred->gc_ctx;
gss_cred->gc_ctx = ctx;
cred->cr_flags |= RPCAUTH_CRED_UPTODATE;
+ cred->cr_flags &= ~RPCAUTH_CRED_NEW;
write_unlock(&gss_ctx_lock);
if (old)
gss_put_ctx(old);
@@ -580,7 +581,7 @@
} else {
struct auth_cred acred = { .uid = uid };
spin_unlock(&gss_auth->lock);
- cred = rpcauth_lookup_credcache(clnt->cl_auth, &acred, 0);
+ cred = rpcauth_lookup_credcache(clnt->cl_auth, &acred, RPCAUTH_LOOKUP_NEW);
if (IS_ERR(cred)) {
err = PTR_ERR(cred);
goto err_put_ctx;
@@ -758,13 +759,13 @@
* Lookup RPCSEC_GSS cred for the current process
*/
static struct rpc_cred *
-gss_lookup_cred(struct rpc_auth *auth, struct auth_cred *acred, int taskflags)
+gss_lookup_cred(struct rpc_auth *auth, struct auth_cred *acred, int flags)
{
- return rpcauth_lookup_credcache(auth, acred, taskflags);
+ return rpcauth_lookup_credcache(auth, acred, flags);
}
static struct rpc_cred *
-gss_create_cred(struct rpc_auth *auth, struct auth_cred *acred, int taskflags)
+gss_create_cred(struct rpc_auth *auth, struct auth_cred *acred, int flags)
{
struct gss_auth *gss_auth = container_of(auth, struct gss_auth, rpc_auth);
struct gss_cred *cred = NULL;
@@ -785,13 +786,8 @@
*/
cred->gc_flags = 0;
cred->gc_base.cr_ops = &gss_credops;
+ cred->gc_base.cr_flags = RPCAUTH_CRED_NEW;
cred->gc_service = gss_auth->service;
- do {
- err = gss_create_upcall(gss_auth, cred);
- } while (err == -EAGAIN);
- if (err < 0)
- goto out_err;
-
return &cred->gc_base;
out_err:
@@ -801,13 +797,34 @@
}
static int
-gss_match(struct auth_cred *acred, struct rpc_cred *rc, int taskflags)
+gss_cred_init(struct rpc_auth *auth, struct rpc_cred *cred)
+{
+ struct gss_auth *gss_auth = container_of(auth, struct gss_auth, rpc_auth);
+ struct gss_cred *gss_cred = container_of(cred,struct gss_cred, gc_base);
+ int err;
+
+ do {
+ err = gss_create_upcall(gss_auth, gss_cred);
+ } while (err == -EAGAIN);
+ return err;
+}
+
+static int
+gss_match(struct auth_cred *acred, struct rpc_cred *rc, int flags)
{
struct gss_cred *gss_cred = container_of(rc, struct gss_cred, gc_base);
+ /*
+ * If the searchflags have set RPCAUTH_LOOKUP_NEW, then
+ * we don't really care if the credential has expired or not,
+ * since the caller should be prepared to reinitialise it.
+ */
+ if ((flags & RPCAUTH_LOOKUP_NEW) && (rc->cr_flags & RPCAUTH_CRED_NEW))
+ goto out;
/* Don't match with creds that have expired. */
if (gss_cred->gc_ctx && time_after(jiffies, gss_cred->gc_ctx->gc_expiry))
return 0;
+out:
return (rc->cr_uid == acred->uid);
}
@@ -1241,6 +1258,7 @@
static struct rpc_credops gss_credops = {
.cr_name = "AUTH_GSS",
.crdestroy = gss_destroy_cred,
+ .cr_init = gss_cred_init,
.crmatch = gss_match,
.crmarshal = gss_marshal,
.crrefresh = gss_refresh,
diff --git a/net/sunrpc/auth_unix.c b/net/sunrpc/auth_unix.c
index 1b3ed4f..df14b6b 100644
--- a/net/sunrpc/auth_unix.c
+++ b/net/sunrpc/auth_unix.c
@@ -75,7 +75,7 @@
atomic_set(&cred->uc_count, 1);
cred->uc_flags = RPCAUTH_CRED_UPTODATE;
- if (flags & RPC_TASK_ROOTCREDS) {
+ if (flags & RPCAUTH_LOOKUP_ROOTCREDS) {
cred->uc_uid = 0;
cred->uc_gid = 0;
cred->uc_gids[0] = NOGROUP;
@@ -108,12 +108,12 @@
* request root creds (e.g. for NFS swapping).
*/
static int
-unx_match(struct auth_cred *acred, struct rpc_cred *rcred, int taskflags)
+unx_match(struct auth_cred *acred, struct rpc_cred *rcred, int flags)
{
struct unx_cred *cred = (struct unx_cred *) rcred;
int i;
- if (!(taskflags & RPC_TASK_ROOTCREDS)) {
+ if (!(flags & RPCAUTH_LOOKUP_ROOTCREDS)) {
int groups;
if (cred->uc_uid != acred->uid
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index 9764c80..a5c0c7b 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -38,44 +38,42 @@
#define RPC_UPCALL_TIMEOUT (30*HZ)
-static void
-__rpc_purge_list(struct rpc_inode *rpci, struct list_head *head, int err)
+static void rpc_purge_list(struct rpc_inode *rpci, struct list_head *head,
+ void (*destroy_msg)(struct rpc_pipe_msg *), int err)
{
struct rpc_pipe_msg *msg;
- void (*destroy_msg)(struct rpc_pipe_msg *);
- destroy_msg = rpci->ops->destroy_msg;
- while (!list_empty(head)) {
+ if (list_empty(head))
+ return;
+ do {
msg = list_entry(head->next, struct rpc_pipe_msg, list);
- list_del_init(&msg->list);
+ list_del(&msg->list);
msg->errno = err;
destroy_msg(msg);
- }
-}
-
-static void
-__rpc_purge_upcall(struct inode *inode, int err)
-{
- struct rpc_inode *rpci = RPC_I(inode);
-
- __rpc_purge_list(rpci, &rpci->pipe, err);
- rpci->pipelen = 0;
+ } while (!list_empty(head));
wake_up(&rpci->waitq);
}
static void
rpc_timeout_upcall_queue(void *data)
{
+ LIST_HEAD(free_list);
struct rpc_inode *rpci = (struct rpc_inode *)data;
struct inode *inode = &rpci->vfs_inode;
+ void (*destroy_msg)(struct rpc_pipe_msg *);
- mutex_lock(&inode->i_mutex);
- if (rpci->ops == NULL)
- goto out;
- if (rpci->nreaders == 0 && !list_empty(&rpci->pipe))
- __rpc_purge_upcall(inode, -ETIMEDOUT);
-out:
- mutex_unlock(&inode->i_mutex);
+ spin_lock(&inode->i_lock);
+ if (rpci->ops == NULL) {
+ spin_unlock(&inode->i_lock);
+ return;
+ }
+ destroy_msg = rpci->ops->destroy_msg;
+ if (rpci->nreaders == 0) {
+ list_splice_init(&rpci->pipe, &free_list);
+ rpci->pipelen = 0;
+ }
+ spin_unlock(&inode->i_lock);
+ rpc_purge_list(rpci, &free_list, destroy_msg, -ETIMEDOUT);
}
int
@@ -84,7 +82,7 @@
struct rpc_inode *rpci = RPC_I(inode);
int res = -EPIPE;
- mutex_lock(&inode->i_mutex);
+ spin_lock(&inode->i_lock);
if (rpci->ops == NULL)
goto out;
if (rpci->nreaders) {
@@ -100,7 +98,7 @@
res = 0;
}
out:
- mutex_unlock(&inode->i_mutex);
+ spin_unlock(&inode->i_lock);
wake_up(&rpci->waitq);
return res;
}
@@ -115,21 +113,29 @@
rpc_close_pipes(struct inode *inode)
{
struct rpc_inode *rpci = RPC_I(inode);
+ struct rpc_pipe_ops *ops;
mutex_lock(&inode->i_mutex);
- if (rpci->ops != NULL) {
+ ops = rpci->ops;
+ if (ops != NULL) {
+ LIST_HEAD(free_list);
+
+ spin_lock(&inode->i_lock);
rpci->nreaders = 0;
- __rpc_purge_list(rpci, &rpci->in_upcall, -EPIPE);
- __rpc_purge_upcall(inode, -EPIPE);
- rpci->nwriters = 0;
- if (rpci->ops->release_pipe)
- rpci->ops->release_pipe(inode);
+ list_splice_init(&rpci->in_upcall, &free_list);
+ list_splice_init(&rpci->pipe, &free_list);
+ rpci->pipelen = 0;
rpci->ops = NULL;
+ spin_unlock(&inode->i_lock);
+ rpc_purge_list(rpci, &free_list, ops->destroy_msg, -EPIPE);
+ rpci->nwriters = 0;
+ if (ops->release_pipe)
+ ops->release_pipe(inode);
+ cancel_delayed_work(&rpci->queue_timeout);
+ flush_scheduled_work();
}
rpc_inode_setowner(inode, NULL);
mutex_unlock(&inode->i_mutex);
- cancel_delayed_work(&rpci->queue_timeout);
- flush_scheduled_work();
}
static struct inode *
@@ -177,16 +183,26 @@
goto out;
msg = (struct rpc_pipe_msg *)filp->private_data;
if (msg != NULL) {
+ spin_lock(&inode->i_lock);
msg->errno = -EAGAIN;
- list_del_init(&msg->list);
+ list_del(&msg->list);
+ spin_unlock(&inode->i_lock);
rpci->ops->destroy_msg(msg);
}
if (filp->f_mode & FMODE_WRITE)
rpci->nwriters --;
- if (filp->f_mode & FMODE_READ)
+ if (filp->f_mode & FMODE_READ) {
rpci->nreaders --;
- if (!rpci->nreaders)
- __rpc_purge_upcall(inode, -EAGAIN);
+ if (rpci->nreaders == 0) {
+ LIST_HEAD(free_list);
+ spin_lock(&inode->i_lock);
+ list_splice_init(&rpci->pipe, &free_list);
+ rpci->pipelen = 0;
+ spin_unlock(&inode->i_lock);
+ rpc_purge_list(rpci, &free_list,
+ rpci->ops->destroy_msg, -EAGAIN);
+ }
+ }
if (rpci->ops->release_pipe)
rpci->ops->release_pipe(inode);
out:
@@ -209,6 +225,7 @@
}
msg = filp->private_data;
if (msg == NULL) {
+ spin_lock(&inode->i_lock);
if (!list_empty(&rpci->pipe)) {
msg = list_entry(rpci->pipe.next,
struct rpc_pipe_msg,
@@ -218,6 +235,7 @@
filp->private_data = msg;
msg->copied = 0;
}
+ spin_unlock(&inode->i_lock);
if (msg == NULL)
goto out_unlock;
}
@@ -225,7 +243,9 @@
res = rpci->ops->upcall(filp, msg, buf, len);
if (res < 0 || msg->len == msg->copied) {
filp->private_data = NULL;
- list_del_init(&msg->list);
+ spin_lock(&inode->i_lock);
+ list_del(&msg->list);
+ spin_unlock(&inode->i_lock);
rpci->ops->destroy_msg(msg);
}
out_unlock:
@@ -610,7 +630,7 @@
return ERR_PTR(error);
dir = nd->dentry->d_inode;
mutex_lock(&dir->i_mutex);
- dentry = lookup_hash(nd);
+ dentry = lookup_one_len(nd->last.name, nd->dentry, nd->last.len);
if (IS_ERR(dentry))
goto out_err;
if (dentry->d_inode) {
@@ -672,7 +692,7 @@
return error;
dir = nd.dentry->d_inode;
mutex_lock(&dir->i_mutex);
- dentry = lookup_hash(&nd);
+ dentry = lookup_one_len(nd.last.name, nd.dentry, nd.last.len);
if (IS_ERR(dentry)) {
error = PTR_ERR(dentry);
goto out_release;
@@ -733,7 +753,7 @@
return error;
dir = nd.dentry->d_inode;
mutex_lock(&dir->i_mutex);
- dentry = lookup_hash(&nd);
+ dentry = lookup_one_len(nd.last.name, nd.dentry, nd.last.len);
if (IS_ERR(dentry)) {
error = PTR_ERR(dentry);
goto out_release;
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 7415406..802d4fe 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -908,10 +908,10 @@
/**
* rpc_run_task - Allocate a new RPC task, then run rpc_execute against it
- * @clnt - pointer to RPC client
- * @flags - RPC flags
- * @ops - RPC call ops
- * @data - user call data
+ * @clnt: pointer to RPC client
+ * @flags: RPC flags
+ * @ops: RPC call ops
+ * @data: user call data
*/
struct rpc_task *rpc_run_task(struct rpc_clnt *clnt, int flags,
const struct rpc_call_ops *ops,
@@ -930,6 +930,7 @@
/**
* rpc_find_parent - find the parent of a child task.
* @child: child task
+ * @parent: parent task
*
* Checks that the parent task is still sleeping on the
* queue 'childq'. If so returns a pointer to the parent.
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 077bbf9..dbf4620 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -13,7 +13,6 @@
*
*/
-#include <asm/bug.h>
#include <linux/config.h>
#include <linux/slab.h>
#include <linux/kmod.h>
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 5760e05..d64aae8 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -123,7 +123,17 @@
then echo yes ; \
else echo no ; fi)
ifeq ($(KBUILD_HAVE_NLS),no)
-HOSTCFLAGS += -DKBUILD_NO_NLS
+ HOSTCFLAGS += -DKBUILD_NO_NLS
+else
+ KBUILD_NEED_LINTL := $(shell \
+ if echo -e "\#include <libintl.h>\nint main(int a, char** b) { gettext(\"\"); return 0; }\n" | \
+ $(HOSTCC) $(HOSTCFLAGS) -x c - -o /dev/null> /dev/null 2>&1 ; \
+ then echo no ; \
+ else echo yes ; fi)
+ ifeq ($(KBUILD_NEED_LINTL),yes)
+ HOSTLOADLIBES_conf += -lintl
+ HOSTLOADLIBES_mconf += -lintl
+ endif
endif
# generated files seem to need this to find local include files
diff --git a/scripts/kconfig/lxdialog/Makefile b/scripts/kconfig/lxdialog/Makefile
index fae3e29..bbf4887 100644
--- a/scripts/kconfig/lxdialog/Makefile
+++ b/scripts/kconfig/lxdialog/Makefile
@@ -2,8 +2,11 @@
#
check-lxdialog := $(srctree)/$(src)/check-lxdialog.sh
-HOST_EXTRACFLAGS:= $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
-HOST_LOADLIBES := $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
+
+# Use reursively expanded variables so we do not call gcc unless
+# we really need to do so. (Do not call gcc as part of make mrproper)
+HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
+HOST_LOADLIBES = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
HOST_EXTRACFLAGS += -DLOCALE
diff --git a/scripts/kconfig/lxdialog/check-lxdialog.sh b/scripts/kconfig/lxdialog/check-lxdialog.sh
index 448e353..120d624 100644
--- a/scripts/kconfig/lxdialog/check-lxdialog.sh
+++ b/scripts/kconfig/lxdialog/check-lxdialog.sh
@@ -4,17 +4,17 @@
# What library to link
ldflags()
{
- echo "main() {}" | $cc -lncursesw -xc - -o /dev/null 2> /dev/null
+ $cc -print-file-name=libncursesw.so | grep -q /
if [ $? -eq 0 ]; then
echo '-lncursesw'
exit
fi
- echo "main() {}" | $cc -lncurses -xc - -o /dev/null 2> /dev/null
+ $cc -print-file-name=libncurses.so | grep -q /
if [ $? -eq 0 ]; then
echo '-lncurses'
exit
fi
- echo "main() {}" | $cc -lcurses -xc - -o /dev/null 2> /dev/null
+ $cc -print-file-name=libcurses.so | grep -q /
if [ $? -eq 0 ]; then
echo '-lcurses'
exit
@@ -36,10 +36,13 @@
fi
}
-compiler=""
+# Temp file, try to clean up after us
+tmp=.lxdialog.tmp
+trap "rm -f $tmp" 0 1 2 3 15
+
# Check if we can link to ncurses
check() {
- echo "main() {}" | $cc -xc - -o /dev/null 2> /dev/null
+ echo "main() {}" | $cc -xc - -o $tmp 2> /dev/null
if [ $? != 0 ]; then
echo " *** Unable to find the ncurses libraries." 1>&2
echo " *** make menuconfig require the ncurses libraries" 1>&2
@@ -59,6 +62,7 @@
exit 1
fi
+cc=""
case "$1" in
"-check")
shift
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 9fd5f5b..99fe4b7 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -45,7 +45,7 @@
# Note: This only supports 'c'.
# usage:
-# kerneldoc [ -docbook | -html | -text | -man ]
+# kernel-doc [ -docbook | -html | -text | -man ]
# [ -function funcname [ -function funcname ...] ] c file(s)s > outputfile
# or
# [ -nofunction funcname [ -function funcname ...] ] c file(s)s > outputfile
@@ -59,7 +59,7 @@
# -nofunction funcname
# If set, then only generate documentation for the other function(s). All
# other functions are ignored. Cannot be used with -function together
-# (yes thats a bug - perl hackers can fix it 8))
+# (yes, that's a bug -- perl hackers can fix it 8))
#
# c files - list of 'c' files to process
#
@@ -90,28 +90,28 @@
# * my_function - does my stuff
# * @my_arg: its mine damnit
# *
-# * Does my stuff explained.
+# * Does my stuff explained.
# */
#
# or, could also use:
# /**
# * my_function - does my stuff
# * @my_arg: its mine damnit
-# * Description: Does my stuff explained.
+# * Description: Does my stuff explained.
# */
# etc.
#
-# Beside functions you can also write documentation for structs, unions,
-# enums and typedefs. Instead of the function name you must write the name
-# of the declaration; the struct/union/enum/typedef must always precede
-# the name. Nesting of declarations is not supported.
+# Beside functions you can also write documentation for structs, unions,
+# enums and typedefs. Instead of the function name you must write the name
+# of the declaration; the struct/union/enum/typedef must always precede
+# the name. Nesting of declarations is not supported.
# Use the argument mechanism to document members or constants.
# e.g.
# /**
# * struct my_struct - short description
# * @a: first member
# * @b: second member
-# *
+# *
# * Longer description
# */
# struct my_struct {
@@ -122,12 +122,12 @@
# };
#
# All descriptions can be multiline, except the short function description.
-#
-# You can also add additional sections. When documenting kernel functions you
-# should document the "Context:" of the function, e.g. whether the functions
+#
+# You can also add additional sections. When documenting kernel functions you
+# should document the "Context:" of the function, e.g. whether the functions
# can be called form interrupts. Unlike other sections you can end it with an
-# empty line.
-# Example-sections should contain the string EXAMPLE so that they are marked
+# empty line.
+# Example-sections should contain the string EXAMPLE so that they are marked
# appropriately in DocBook.
#
# Example:
@@ -135,7 +135,7 @@
# * user_function - function that can only be called in user context
# * @a: some argument
# * Context: !in_interrupt()
-# *
+# *
# * Some description
# * Example:
# * user_function(22);
@@ -223,9 +223,9 @@
my $blankline = $blankline_man;
my $modulename = "Kernel API";
my $function_only = 0;
-my $man_date = ('January', 'February', 'March', 'April', 'May', 'June',
- 'July', 'August', 'September', 'October',
- 'November', 'December')[(localtime)[4]] .
+my $man_date = ('January', 'February', 'March', 'April', 'May', 'June',
+ 'July', 'August', 'September', 'October',
+ 'November', 'December')[(localtime)[4]] .
" " . ((localtime)[5]+1900);
# Essentially these are globals
@@ -236,7 +236,7 @@
my ($type,$declaration_name,$return_type);
my ($newsection,$newcontents,$prototype,$filelist, $brcount, %source_map);
-# Generated docbook code is inserted in a template at a point where
+# Generated docbook code is inserted in a template at a point where
# docbook v3.1 requires a non-zero sequence of RefEntry's; see:
# http://www.oasis-open.org/docbook/documentation/reference/html/refentry.html
# We keep track of number of generated entries and generate a dummy
@@ -365,7 +365,7 @@
# parameterdescs => %parameter descriptions
# sectionlist => @list of sections
# sections => %descriont descriptions
-#
+#
sub output_highlight {
my $contents = join "\n",@_;
@@ -400,7 +400,7 @@
print "<blockquote>\n";
output_highlight($args{'sections'}{$section});
print "</blockquote>\n";
- }
+ }
}
# output enum in html
@@ -434,7 +434,7 @@
print "<hr>\n";
}
-# output tyepdef in html
+# output typedef in html
sub output_typedef_html(%) {
my %args = %{$_[0]};
my ($parameter);
@@ -551,7 +551,7 @@
sub output_section_xml(%) {
my %args = %{$_[0]};
- my $section;
+ my $section;
# print out each section
$lineprefix=" ";
foreach $section (@{$args{'sectionlist'}}) {
@@ -778,7 +778,7 @@
print "</refsynopsisdiv>\n";
print "<refsect1>\n";
- print " <title>Constants</title>\n";
+ print " <title>Constants</title>\n";
print " <variablelist>\n";
foreach $parameter (@{$args{'parameterlist'}}) {
my $parameter_name = $parameter;
@@ -1157,7 +1157,7 @@
foreach $section (@{$args{'sectionlist'}}) {
print "$section:\n\n";
output_highlight($args{'sections'}{$section});
- }
+ }
print "\n\n";
}
@@ -1262,8 +1262,8 @@
my $name = shift;
my $functype = shift;
my $func = "output_${functype}_$output_mode";
- if (($function_only==0) ||
- ( $function_only == 1 && defined($function_table{$name})) ||
+ if (($function_only==0) ||
+ ( $function_only == 1 && defined($function_table{$name})) ||
( $function_only == 2 && !defined($function_table{$name})))
{
&$func(@_);
@@ -1282,7 +1282,7 @@
}
##
-# takes a declaration (struct, union, enum, typedef) and
+# takes a declaration (struct, union, enum, typedef) and
# invokes the right handler. NOT called for functions.
sub dump_declaration($$) {
no strict 'refs';
@@ -1352,7 +1352,7 @@
}
}
-
+
output_declaration($declaration_name,
'enum',
{'enum' => $declaration_name,
@@ -1409,7 +1409,7 @@
while ($args =~ /(\([^\),]+),/) {
$args =~ s/(\([^\),]+),/$1#/g;
}
-
+
foreach my $arg (split($splitter, $args)) {
# strip comments
$arg =~ s/\/\*.*\*\///;
@@ -1529,7 +1529,7 @@
# the following functions' documentation still comes out right:
# - parport_register_device (function pointer parameters)
# - atomic_set (macro)
- # - pci_match_device (long return type)
+ # - pci_match_device, __copy_to_user (long return type)
if ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
$prototype =~ m/^(\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
@@ -1544,7 +1544,9 @@
$prototype =~ m/^(\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/ ||
$prototype =~ m/^(\w+\s+\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/ ||
$prototype =~ m/^(\w+\s+\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/ ||
- $prototype =~ m/^(\w+\s+\w+\s+\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/) {
+ $prototype =~ m/^(\w+\s+\w+\s+\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/ ||
+ $prototype =~ m/^(\w+\s+\w+\s+\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/ ||
+ $prototype =~ m/^(\w+\s+\w+\s+\w+\s+\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/) {
$return_type = $1;
$declaration_name = $2;
my $args = $3;
@@ -1556,7 +1558,7 @@
return;
}
- output_declaration($declaration_name,
+ output_declaration($declaration_name,
'function',
{'function' => $declaration_name,
'module' => $modulename,
@@ -1615,11 +1617,11 @@
%sections = ();
@sectionlist = ();
$prototype = "";
-
+
$state = 0;
}
-sub process_state3_function($$) {
+sub process_state3_function($$) {
my $x = shift;
my $file = shift;
@@ -1638,7 +1640,7 @@
}
}
-sub process_state3_type($$) {
+sub process_state3_type($$) {
my $x = shift;
my $file = shift;
@@ -1778,7 +1780,7 @@
} elsif (/$doc_content/) {
# miguel-style comment kludge, look for blank lines after
# @parameter line to signify start of description
- if ($1 eq "" &&
+ if ($1 eq "" &&
($section =~ m/^@/ || $section eq $section_context)) {
dump_section($section, xml_escape($contents));
$section = $section_default;
@@ -1788,7 +1790,7 @@
}
} else {
# i dont know - bad line? ignore.
- print STDERR "Warning(${file}:$.): bad line: $_";
+ print STDERR "Warning(${file}:$.): bad line: $_";
++$warnings;
}
} elsif ($state == 3) { # scanning for function { (end of prototype)
@@ -1843,7 +1845,7 @@
else
{
$contents .= $1 . "\n";
- }
+ }
}
}
}
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 90db5c7..0c62798 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -67,9 +67,10 @@
description = kmalloc(dlen + 1, GFP_KERNEL);
if (!description)
goto error;
+ description[dlen] = '\0';
ret = -EFAULT;
- if (copy_from_user(description, _description, dlen + 1) != 0)
+ if (copy_from_user(description, _description, dlen) != 0)
goto error2;
/* pull the payload in if one was supplied */
@@ -161,9 +162,10 @@
description = kmalloc(dlen + 1, GFP_KERNEL);
if (!description)
goto error;
+ description[dlen] = '\0';
ret = -EFAULT;
- if (copy_from_user(description, _description, dlen + 1) != 0)
+ if (copy_from_user(description, _description, dlen) != 0)
goto error2;
/* pull the callout info into kernel space */
@@ -182,9 +184,10 @@
callout_info = kmalloc(dlen + 1, GFP_KERNEL);
if (!callout_info)
goto error2;
+ callout_info[dlen] = '\0';
ret = -EFAULT;
- if (copy_from_user(callout_info, _callout_info, dlen + 1) != 0)
+ if (copy_from_user(callout_info, _callout_info, dlen) != 0)
goto error3;
}
@@ -279,9 +282,10 @@
name = kmalloc(nlen + 1, GFP_KERNEL);
if (!name)
goto error;
+ name[nlen] = '\0';
ret = -EFAULT;
- if (copy_from_user(name, _name, nlen + 1) != 0)
+ if (copy_from_user(name, _name, nlen) != 0)
goto error2;
}
@@ -583,9 +587,10 @@
description = kmalloc(dlen + 1, GFP_KERNEL);
if (!description)
goto error;
+ description[dlen] = '\0';
ret = -EFAULT;
- if (copy_from_user(description, _description, dlen + 1) != 0)
+ if (copy_from_user(description, _description, dlen) != 0)
goto error2;
/* get the keyring at which to begin the search */
diff --git a/security/seclvl.c b/security/seclvl.c
index 1caac01..8529ea6 100644
--- a/security/seclvl.c
+++ b/security/seclvl.c
@@ -368,8 +368,8 @@
*/
static int seclvl_settime(struct timespec *tv, struct timezone *tz)
{
- struct timespec now;
- if (seclvl > 1) {
+ if (tv && seclvl > 1) {
+ struct timespec now;
now = current_kernel_time();
if (tv->tv_sec < now.tv_sec ||
(tv->tv_sec == now.tv_sec && tv->tv_nsec < now.tv_nsec)) {
diff --git a/security/selinux/Kconfig b/security/selinux/Kconfig
index b59582b..f636f53 100644
--- a/security/selinux/Kconfig
+++ b/security/selinux/Kconfig
@@ -1,6 +1,6 @@
config SECURITY_SELINUX
bool "NSA SELinux Support"
- depends on SECURITY && NET && INET
+ depends on SECURITY_NETWORK && AUDIT && NET && INET
default n
help
This selects NSA Security-Enhanced Linux (SELinux).
diff --git a/security/selinux/Makefile b/security/selinux/Makefile
index 06d54d9..688c0a2 100644
--- a/security/selinux/Makefile
+++ b/security/selinux/Makefile
@@ -4,9 +4,7 @@
obj-$(CONFIG_SECURITY_SELINUX) := selinux.o ss/
-selinux-y := avc.o hooks.o selinuxfs.o netlink.o nlmsgtab.o
-
-selinux-$(CONFIG_SECURITY_NETWORK) += netif.o
+selinux-y := avc.o hooks.o selinuxfs.o netlink.o nlmsgtab.o netif.o
selinux-$(CONFIG_SECURITY_NETWORK_XFRM) += xfrm.o
diff --git a/security/selinux/avc.c b/security/selinux/avc.c
index 53d6c7b..ac5d69b 100644
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -43,13 +43,11 @@
#undef S_
};
-#ifdef CONFIG_AUDIT
static const char *class_to_string[] = {
#define S_(s) s,
#include "class_to_string.h"
#undef S_
};
-#endif
#define TB_(s) static const char * s [] = {
#define TE_(s) };
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index b9f8d97..b7773bf 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -127,7 +127,6 @@
if (!tsec)
return -ENOMEM;
- tsec->magic = SELINUX_MAGIC;
tsec->task = task;
tsec->osid = tsec->sid = tsec->ptrace_sid = SECINITSID_UNLABELED;
task->security = tsec;
@@ -138,10 +137,6 @@
static void task_free_security(struct task_struct *task)
{
struct task_security_struct *tsec = task->security;
-
- if (!tsec || tsec->magic != SELINUX_MAGIC)
- return;
-
task->security = NULL;
kfree(tsec);
}
@@ -157,14 +152,10 @@
init_MUTEX(&isec->sem);
INIT_LIST_HEAD(&isec->list);
- isec->magic = SELINUX_MAGIC;
isec->inode = inode;
isec->sid = SECINITSID_UNLABELED;
isec->sclass = SECCLASS_FILE;
- if (tsec && tsec->magic == SELINUX_MAGIC)
- isec->task_sid = tsec->sid;
- else
- isec->task_sid = SECINITSID_UNLABELED;
+ isec->task_sid = tsec->sid;
inode->i_security = isec;
return 0;
@@ -175,9 +166,6 @@
struct inode_security_struct *isec = inode->i_security;
struct superblock_security_struct *sbsec = inode->i_sb->s_security;
- if (!isec || isec->magic != SELINUX_MAGIC)
- return;
-
spin_lock(&sbsec->isec_lock);
if (!list_empty(&isec->list))
list_del_init(&isec->list);
@@ -192,19 +180,13 @@
struct task_security_struct *tsec = current->security;
struct file_security_struct *fsec;
- fsec = kzalloc(sizeof(struct file_security_struct), GFP_ATOMIC);
+ fsec = kzalloc(sizeof(struct file_security_struct), GFP_KERNEL);
if (!fsec)
return -ENOMEM;
- fsec->magic = SELINUX_MAGIC;
fsec->file = file;
- if (tsec && tsec->magic == SELINUX_MAGIC) {
- fsec->sid = tsec->sid;
- fsec->fown_sid = tsec->sid;
- } else {
- fsec->sid = SECINITSID_UNLABELED;
- fsec->fown_sid = SECINITSID_UNLABELED;
- }
+ fsec->sid = tsec->sid;
+ fsec->fown_sid = tsec->sid;
file->f_security = fsec;
return 0;
@@ -213,10 +195,6 @@
static void file_free_security(struct file *file)
{
struct file_security_struct *fsec = file->f_security;
-
- if (!fsec || fsec->magic != SELINUX_MAGIC)
- return;
-
file->f_security = NULL;
kfree(fsec);
}
@@ -233,7 +211,6 @@
INIT_LIST_HEAD(&sbsec->list);
INIT_LIST_HEAD(&sbsec->isec_head);
spin_lock_init(&sbsec->isec_lock);
- sbsec->magic = SELINUX_MAGIC;
sbsec->sb = sb;
sbsec->sid = SECINITSID_UNLABELED;
sbsec->def_sid = SECINITSID_FILE;
@@ -246,9 +223,6 @@
{
struct superblock_security_struct *sbsec = sb->s_security;
- if (!sbsec || sbsec->magic != SELINUX_MAGIC)
- return;
-
spin_lock(&sb_security_lock);
if (!list_empty(&sbsec->list))
list_del_init(&sbsec->list);
@@ -258,7 +232,6 @@
kfree(sbsec);
}
-#ifdef CONFIG_SECURITY_NETWORK
static int sk_alloc_security(struct sock *sk, int family, gfp_t priority)
{
struct sk_security_struct *ssec;
@@ -270,7 +243,6 @@
if (!ssec)
return -ENOMEM;
- ssec->magic = SELINUX_MAGIC;
ssec->sk = sk;
ssec->peer_sid = SECINITSID_UNLABELED;
sk->sk_security = ssec;
@@ -282,13 +254,12 @@
{
struct sk_security_struct *ssec = sk->sk_security;
- if (sk->sk_family != PF_UNIX || ssec->magic != SELINUX_MAGIC)
+ if (sk->sk_family != PF_UNIX)
return;
sk->sk_security = NULL;
kfree(ssec);
}
-#endif /* CONFIG_SECURITY_NETWORK */
/* The security server must be initialized before
any labeling or access decisions can be provided. */
@@ -1483,7 +1454,6 @@
if (!bsec)
return -ENOMEM;
- bsec->magic = SELINUX_MAGIC;
bsec->bprm = bprm;
bsec->sid = SECINITSID_UNLABELED;
bsec->set = 0;
@@ -2454,35 +2424,27 @@
prot = reqprot;
#ifndef CONFIG_PPC32
- if ((prot & PROT_EXEC) && !(vma->vm_flags & VM_EXECUTABLE) &&
- (vma->vm_start >= vma->vm_mm->start_brk &&
- vma->vm_end <= vma->vm_mm->brk)) {
- /*
- * We are making an executable mapping in the brk region.
- * This has an additional execheap check.
- */
- rc = task_has_perm(current, current, PROCESS__EXECHEAP);
- if (rc)
- return rc;
- }
- if (vma->vm_file != NULL && vma->anon_vma != NULL && (prot & PROT_EXEC)) {
- /*
- * We are making executable a file mapping that has
- * had some COW done. Since pages might have been written,
- * check ability to execute the possibly modified content.
- * This typically should only occur for text relocations.
- */
- int rc = file_has_perm(current, vma->vm_file, FILE__EXECMOD);
- if (rc)
- return rc;
- }
- if (!vma->vm_file && (prot & PROT_EXEC) &&
- vma->vm_start <= vma->vm_mm->start_stack &&
- vma->vm_end >= vma->vm_mm->start_stack) {
- /* Attempt to make the process stack executable.
- * This has an additional execstack check.
- */
- rc = task_has_perm(current, current, PROCESS__EXECSTACK);
+ if ((prot & PROT_EXEC) && !(vma->vm_flags & VM_EXEC)) {
+ rc = 0;
+ if (vma->vm_start >= vma->vm_mm->start_brk &&
+ vma->vm_end <= vma->vm_mm->brk) {
+ rc = task_has_perm(current, current,
+ PROCESS__EXECHEAP);
+ } else if (!vma->vm_file &&
+ vma->vm_start <= vma->vm_mm->start_stack &&
+ vma->vm_end >= vma->vm_mm->start_stack) {
+ rc = task_has_perm(current, current, PROCESS__EXECSTACK);
+ } else if (vma->vm_file && vma->anon_vma) {
+ /*
+ * We are making executable a file mapping that has
+ * had some COW done. Since pages might have been
+ * written, check ability to execute the possibly
+ * modified content. This typically should only
+ * occur for text relocations.
+ */
+ rc = file_has_perm(current, vma->vm_file,
+ FILE__EXECMOD);
+ }
if (rc)
return rc;
}
@@ -2772,8 +2734,6 @@
return;
}
-#ifdef CONFIG_SECURITY_NETWORK
-
/* Returns error only if unable to parse addresses */
static int selinux_parse_skb_ipv4(struct sk_buff *skb, struct avc_audit_data *ad)
{
@@ -3592,15 +3552,6 @@
#endif /* CONFIG_NETFILTER */
-#else
-
-static inline int selinux_nlmsg_perm(struct sock *sk, struct sk_buff *skb)
-{
- return 0;
-}
-
-#endif /* CONFIG_SECURITY_NETWORK */
-
static int selinux_netlink_send(struct sock *sk, struct sk_buff *skb)
{
struct task_security_struct *tsec;
@@ -3642,14 +3593,9 @@
if (!isec)
return -ENOMEM;
- isec->magic = SELINUX_MAGIC;
isec->sclass = sclass;
isec->ipc_perm = perm;
- if (tsec) {
- isec->sid = tsec->sid;
- } else {
- isec->sid = SECINITSID_UNLABELED;
- }
+ isec->sid = tsec->sid;
perm->security = isec;
return 0;
@@ -3658,9 +3604,6 @@
static void ipc_free_security(struct kern_ipc_perm *perm)
{
struct ipc_security_struct *isec = perm->security;
- if (!isec || isec->magic != SELINUX_MAGIC)
- return;
-
perm->security = NULL;
kfree(isec);
}
@@ -3673,7 +3616,6 @@
if (!msec)
return -ENOMEM;
- msec->magic = SELINUX_MAGIC;
msec->msg = msg;
msec->sid = SECINITSID_UNLABELED;
msg->security = msec;
@@ -3684,8 +3626,6 @@
static void msg_msg_free_security(struct msg_msg *msg)
{
struct msg_security_struct *msec = msg->security;
- if (!msec || msec->magic != SELINUX_MAGIC)
- return;
msg->security = NULL;
kfree(msec);
@@ -4387,7 +4327,6 @@
.getprocattr = selinux_getprocattr,
.setprocattr = selinux_setprocattr,
-#ifdef CONFIG_SECURITY_NETWORK
.unix_stream_connect = selinux_socket_unix_stream_connect,
.unix_may_send = selinux_socket_unix_may_send,
@@ -4409,7 +4348,6 @@
.sk_alloc_security = selinux_sk_alloc_security,
.sk_free_security = selinux_sk_free_security,
.sk_getsid = selinux_sk_getsid_security,
-#endif
#ifdef CONFIG_SECURITY_NETWORK_XFRM
.xfrm_policy_alloc_security = selinux_xfrm_policy_alloc,
@@ -4487,7 +4425,7 @@
all processes and objects when they are created. */
security_initcall(selinux_init);
-#if defined(CONFIG_SECURITY_NETWORK) && defined(CONFIG_NETFILTER)
+#if defined(CONFIG_NETFILTER)
static struct nf_hook_ops selinux_ipv4_op = {
.hook = selinux_ipv4_postroute_last,
@@ -4548,13 +4486,13 @@
}
#endif
-#else /* CONFIG_SECURITY_NETWORK && CONFIG_NETFILTER */
+#else /* CONFIG_NETFILTER */
#ifdef CONFIG_SECURITY_SELINUX_DISABLE
#define selinux_nf_ip_exit()
#endif
-#endif /* CONFIG_SECURITY_NETWORK && CONFIG_NETFILTER */
+#endif /* CONFIG_NETFILTER */
#ifdef CONFIG_SECURITY_SELINUX_DISABLE
int selinux_disable(void)
diff --git a/security/selinux/include/objsec.h b/security/selinux/include/objsec.h
index 887937c..54c0307 100644
--- a/security/selinux/include/objsec.h
+++ b/security/selinux/include/objsec.h
@@ -27,7 +27,6 @@
#include "avc.h"
struct task_security_struct {
- unsigned long magic; /* magic number for this module */
struct task_struct *task; /* back pointer to task object */
u32 osid; /* SID prior to last execve */
u32 sid; /* current SID */
@@ -37,7 +36,6 @@
};
struct inode_security_struct {
- unsigned long magic; /* magic number for this module */
struct inode *inode; /* back pointer to inode object */
struct list_head list; /* list of inode_security_struct */
u32 task_sid; /* SID of creating task */
@@ -49,14 +47,12 @@
};
struct file_security_struct {
- unsigned long magic; /* magic number for this module */
struct file *file; /* back pointer to file object */
u32 sid; /* SID of open file description */
u32 fown_sid; /* SID of file owner (for SIGIO) */
};
struct superblock_security_struct {
- unsigned long magic; /* magic number for this module */
struct super_block *sb; /* back pointer to sb object */
struct list_head list; /* list of superblock_security_struct */
u32 sid; /* SID of file system */
@@ -70,20 +66,17 @@
};
struct msg_security_struct {
- unsigned long magic; /* magic number for this module */
struct msg_msg *msg; /* back pointer */
u32 sid; /* SID of message */
};
struct ipc_security_struct {
- unsigned long magic; /* magic number for this module */
struct kern_ipc_perm *ipc_perm; /* back pointer */
u16 sclass; /* security class of this object */
u32 sid; /* SID of IPC resource */
};
struct bprm_security_struct {
- unsigned long magic; /* magic number for this module */
struct linux_binprm *bprm; /* back pointer to bprm object */
u32 sid; /* SID for transformed process */
unsigned char set;
@@ -102,7 +95,6 @@
};
struct sk_security_struct {
- unsigned long magic; /* magic number for this module */
struct sock *sk; /* back pointer to sk object */
u32 peer_sid; /* SID of peer */
};
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index 54147c1..149feb4 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -882,15 +882,21 @@
writel(0x1fff, aaci->base + AACI_INTCLR);
writel(aaci->maincr, aaci->base + AACI_MAINCR);
- /*
- * Size the FIFOs.
- */
- aaci->fifosize = aaci_size_fifo(aaci);
-
ret = aaci_probe_ac97(aaci);
if (ret)
goto out;
+ /*
+ * Size the FIFOs (must be multiple of 16).
+ */
+ aaci->fifosize = aaci_size_fifo(aaci);
+ if (aaci->fifosize & 15) {
+ printk(KERN_WARNING "AACI: fifosize = %d not supported\n",
+ aaci->fifosize);
+ ret = -ENODEV;
+ goto out;
+ }
+
ret = aaci_init_pcm(aaci);
if (ret)
goto out;
diff --git a/sound/core/info.c b/sound/core/info.c
index ae88539..af123e3 100644
--- a/sound/core/info.c
+++ b/sound/core/info.c
@@ -444,8 +444,8 @@
return mask;
}
-static inline int _snd_info_entry_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long snd_info_entry_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
struct snd_info_private_data *data;
struct snd_info_entry *entry;
@@ -465,17 +465,6 @@
return -ENOTTY;
}
-/* FIXME: need to unlock BKL to allow preemption */
-static int snd_info_entry_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- int err;
- unlock_kernel();
- err = _snd_info_entry_ioctl(inode, file, cmd, arg);
- lock_kernel();
- return err;
-}
-
static int snd_info_entry_mmap(struct file *file, struct vm_area_struct *vma)
{
struct inode *inode = file->f_dentry->d_inode;
@@ -499,15 +488,15 @@
static struct file_operations snd_info_entry_operations =
{
- .owner = THIS_MODULE,
- .llseek = snd_info_entry_llseek,
- .read = snd_info_entry_read,
- .write = snd_info_entry_write,
- .poll = snd_info_entry_poll,
- .ioctl = snd_info_entry_ioctl,
- .mmap = snd_info_entry_mmap,
- .open = snd_info_entry_open,
- .release = snd_info_entry_release,
+ .owner = THIS_MODULE,
+ .llseek = snd_info_entry_llseek,
+ .read = snd_info_entry_read,
+ .write = snd_info_entry_write,
+ .poll = snd_info_entry_poll,
+ .unlocked_ioctl = snd_info_entry_ioctl,
+ .mmap = snd_info_entry_mmap,
+ .open = snd_info_entry_open,
+ .release = snd_info_entry_release,
};
/**
diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c
index 29676d8..112ddf7 100644
--- a/sound/drivers/serial-u16550.c
+++ b/sound/drivers/serial-u16550.c
@@ -789,7 +789,7 @@
if ((err = snd_uart16550_detect(uart)) <= 0) {
printk(KERN_ERR "no UART detected at 0x%lx\n", iobase);
- return err;
+ return -ENODEV;
}
if (irq >= 0 && irq != SNDRV_AUTO_IRQ) {
diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c
index bd8e238..fd9bb25 100644
--- a/sound/isa/cmi8330.c
+++ b/sound/isa/cmi8330.c
@@ -109,7 +109,9 @@
MODULE_PARM_DESC(wssdma, "DMA for CMI8330 WSS driver.");
static struct platform_device *platform_devices[SNDRV_CARDS];
+#ifdef CONFIG_PNP
static int pnp_registered;
+#endif
#define CMI8330_RMUX3D 16
#define CMI8330_MUTEMUX 17
@@ -672,8 +674,10 @@
{
int i;
+#ifdef CONFIG_PNP
if (pnp_registered)
pnp_unregister_card_driver(&cmi8330_pnpc_driver);
+#endif
for (i = 0; i < ARRAY_SIZE(platform_devices); ++i)
platform_device_unregister(platform_devices[i]);
platform_driver_unregister(&snd_cmi8330_driver);
@@ -700,11 +704,13 @@
cards++;
}
+#ifdef CONFIG_PNP
err = pnp_register_card_driver(&cmi8330_pnpc_driver);
if (err >= 0) {
pnp_registered = 1;
cards += err;
}
+#endif
if (!cards) {
#ifdef MODULE
diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c
index e168333..4fa4310 100644
--- a/sound/isa/cs423x/cs4236.c
+++ b/sound/isa/cs423x/cs4236.c
@@ -75,8 +75,10 @@
#ifdef CS4232
#define IDENT "CS4232"
+#define CS423X_DRIVER "snd_cs4232"
#else
#define IDENT "CS4236+"
+#define CS423X_DRIVER "snd_cs4236"
#endif
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
@@ -125,10 +127,12 @@
MODULE_PARM_DESC(dma2, "DMA2 # for " IDENT " driver.");
static struct platform_device *platform_devices[SNDRV_CARDS];
+#ifdef CONFIG_PNP
static int pnpc_registered;
#ifdef CS4232
static int pnp_registered;
#endif
+#endif /* CONFIG_PNP */
struct snd_card_cs4236 {
struct snd_cs4231 *chip;
@@ -158,7 +162,6 @@
#endif /* CS4232 */
#ifdef CS4232
-#define CS423X_DRIVER "snd_cs4232"
#define CS423X_ISAPNP_DRIVER "cs4232_isapnp"
static struct pnp_card_device_id snd_cs423x_pnpids[] = {
/* Philips PCA70PS */
@@ -175,11 +178,12 @@
{ .id = "CSC7632", .devs = { { "CSC0000" }, { "CSC0010" }, { "PNPb006" } } },
/* SIC CrystalWave 32 (CS4232) */
{ .id = "CSCf032", .devs = { { "CSC0000" }, { "CSC0010" }, { "CSC0003" } } },
+ /* Netfinity 3000 on-board soundcard */
+ { .id = "CSCe825", .devs = { { "CSC0100" }, { "CSC0110" }, { "CSC010f" } } },
/* --- */
{ .id = "" } /* end */
};
#else /* CS4236 */
-#define CS423X_DRIVER "snd_cs4236"
#define CS423X_ISAPNP_DRIVER "cs4236_isapnp"
static struct pnp_card_device_id snd_cs423x_pnpids[] = {
/* Intel Marlin Spike Motherboard - CS4235 */
@@ -747,12 +751,14 @@
{
int i;
+#ifdef CONFIG_PNP
if (pnpc_registered)
pnp_unregister_card_driver(&cs423x_pnpc_driver);
#ifdef CS4232
if (pnp_registered)
pnp_unregister_driver(&cs4232_pnp_driver);
#endif
+#endif /* CONFIG_PNP */
for (i = 0; i < ARRAY_SIZE(platform_devices); ++i)
platform_device_unregister(platform_devices[i]);
platform_driver_unregister(&cs423x_nonpnp_driver);
@@ -778,6 +784,7 @@
platform_devices[i] = device;
cards++;
}
+#ifdef CONFIG_PNP
#ifdef CS4232
i = pnp_register_driver(&cs4232_pnp_driver);
if (i >= 0) {
@@ -790,6 +797,8 @@
pnpc_registered = 1;
cards += i;
}
+#endif /* CONFIG_PNP */
+
if (!cards) {
#ifdef MODULE
printk(KERN_ERR IDENT " soundcard not found or device busy\n");
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index bf5de07..08f032b 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -1878,9 +1878,9 @@
MODULE_PARM_DESC(dma2, "DMA 2 # for ES18xx driver.");
static struct platform_device *platform_devices[SNDRV_CARDS];
-static int pnp_registered;
#ifdef CONFIG_PNP
+static int pnp_registered;
static struct pnp_card_device_id snd_audiodrive_pnpids[] = {
/* ESS 1868 (integrated on Compaq dual P-Pro motherboard and Genius 18PnP 3D) */
@@ -2209,8 +2209,10 @@
{
int i;
+#ifdef CONFIG_PNP
if (pnp_registered)
pnp_unregister_card_driver(&es18xx_pnpc_driver);
+#endif
for (i = 0; i < ARRAY_SIZE(platform_devices); ++i)
platform_device_unregister(platform_devices[i]);
platform_driver_unregister(&snd_es18xx_nonpnp_driver);
@@ -2237,11 +2239,13 @@
cards++;
}
+#ifdef CONFIG_PNP
i = pnp_register_card_driver(&es18xx_pnpc_driver);
if (i >= 0) {
pnp_registered = 1;
cards += i;
}
+#endif
if(!cards) {
#ifdef MODULE
diff --git a/sound/isa/gus/gusclassic.c b/sound/isa/gus/gusclassic.c
index d1165b9..91c2191 100644
--- a/sound/isa/gus/gusclassic.c
+++ b/sound/isa/gus/gusclassic.c
@@ -195,7 +195,7 @@
goto _err;
}
sprintf(card->longname + strlen(card->longname), " at 0x%lx, irq %d, dma %d", gus->gf1.port, xirq, xdma1);
- if (dma2 >= 0)
+ if (xdma2 >= 0)
sprintf(card->longname + strlen(card->longname), "&%d", xdma2);
snd_card_set_dev(card, &pdev->dev);
diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c
index ca359e0..9d84319 100644
--- a/sound/isa/opl3sa2.c
+++ b/sound/isa/opl3sa2.c
@@ -91,8 +91,10 @@
MODULE_PARM_DESC(opl3sa3_ymode, "Speaker size selection for 3D Enhancement mode: Desktop/Large Notebook/Small Notebook/HiFi.");
static struct platform_device *platform_devices[SNDRV_CARDS];
+#ifdef CONFIG_PNP
static int pnp_registered;
static int pnpc_registered;
+#endif
/* control ports */
#define OPL3SA2_PM_CTRL 0x01
@@ -721,7 +723,7 @@
}
sprintf(card->longname, "%s at 0x%lx, irq %d, dma %d",
card->shortname, chip->port, xirq, xdma1);
- if (dma2 >= 0)
+ if (xdma2 >= 0)
sprintf(card->longname + strlen(card->longname), "&%d", xdma2);
return snd_card_register(card);
@@ -779,7 +781,7 @@
#endif
static struct pnp_driver opl3sa2_pnp_driver = {
- .name = "opl3sa2-pnpbios",
+ .name = "snd-opl3sa2-pnpbios",
.id_table = snd_opl3sa2_pnpbiosids,
.probe = snd_opl3sa2_pnp_detect,
.remove = __devexit_p(snd_opl3sa2_pnp_remove),
@@ -846,7 +848,7 @@
static struct pnp_card_driver opl3sa2_pnpc_driver = {
.flags = PNP_DRIVER_RES_DISABLE,
- .name = "opl3sa2",
+ .name = "snd-opl3sa2-cpnp",
.id_table = snd_opl3sa2_pnpids,
.probe = snd_opl3sa2_pnp_cdetect,
.remove = __devexit_p(snd_opl3sa2_pnp_cremove),
@@ -929,10 +931,12 @@
{
int i;
+#ifdef CONFIG_PNP
if (pnpc_registered)
pnp_unregister_card_driver(&opl3sa2_pnpc_driver);
if (pnp_registered)
pnp_unregister_driver(&opl3sa2_pnp_driver);
+#endif
for (i = 0; i < ARRAY_SIZE(platform_devices); ++i)
platform_device_unregister(platform_devices[i]);
platform_driver_unregister(&snd_opl3sa2_nonpnp_driver);
@@ -961,6 +965,7 @@
cards++;
}
+#ifdef CONFIG_PNP
err = pnp_register_driver(&opl3sa2_pnp_driver);
if (err >= 0) {
pnp_registered = 1;
@@ -971,6 +976,7 @@
pnpc_registered = 1;
cards += err;
}
+#endif
if (!cards) {
#ifdef MODULE
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index 1ea3944..63d96be 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -1349,7 +1349,7 @@
int error;
struct snd_pcm *pcm;
- if ((error = snd_pcm_new(codec->card, "OPTi 82C93X", device, 1, 1, &pcm)))
+ if ((error = snd_pcm_new(codec->card, "OPTi 82C93X", device, 1, 1, &pcm)) < 0)
return error;
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_opti93x_playback_ops);
diff --git a/sound/isa/sb/sb16.c b/sound/isa/sb/sb16.c
index c0be7a5..0667bd1 100644
--- a/sound/isa/sb/sb16.c
+++ b/sound/isa/sb/sb16.c
@@ -179,6 +179,8 @@
{ .id = "CTL0086", .devs = { { "CTL0041" } } },
/* Sound Blaster Vibra16X */
{ .id = "CTL00f0", .devs = { { "CTL0043" } } },
+ /* Sound Blaster 16 (Virtual PC 2004) */
+ { .id = "tBA03b0", .devs = { {.id="PNPb003" } } },
#else /* SNDRV_SBAWE defined */
/* Sound Blaster AWE 32 PnP */
{ .id = "CTL0035", .devs = { { "CTL0031" }, { "CTL0021" } } },
@@ -235,8 +237,6 @@
{ .id = "CTLXXXX" , .devs = { { "CTL0044" }, { "CTL0023" } } },
{ .id = "CTLXXXX" , .devs = { { "CTL0045" }, { "CTL0022" } } },
#endif /* SNDRV_SBAWE */
- /* Sound Blaster 16 PnP (Virtual PC 2004)*/
- { .id = "tBA03b0", .devs = { { "PNPb003" } } },
{ .id = "", }
};
diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c
index 5fb981c..29bba8c 100644
--- a/sound/isa/sscape.c
+++ b/sound/isa/sscape.c
@@ -69,9 +69,9 @@
MODULE_PARM_DESC(dma, "DMA # for SoundScape driver.");
static struct platform_device *platform_devices[SNDRV_CARDS];
-static int pnp_registered;
#ifdef CONFIG_PNP
+static int pnp_registered;
static struct pnp_card_device_id sscape_pnpids[] = {
{ .id = "ENS3081", .devs = { { "ENS0000" } } },
{ .id = "" } /* end */
@@ -1391,8 +1391,10 @@
{
int i;
+#ifdef CONFIG_PNP
if (pnp_registered)
pnp_unregister_card_driver(&sscape_pnpc_driver);
+#endif
for (i = 0; i < ARRAY_SIZE(platform_devices); ++i)
platform_device_unregister(platform_devices[i]);
platform_driver_unregister(&snd_sscape_driver);
@@ -1466,8 +1468,10 @@
ret = sscape_manual_probe();
if (ret < 0)
return ret;
+#ifdef CONFIG_PNP
if (pnp_register_card_driver(&sscape_pnpc_driver) >= 0)
pnp_registered = 1;
+#endif
return 0;
}
diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c
index a6dcb2f..fa3ab96 100644
--- a/sound/isa/wavefront/wavefront.c
+++ b/sound/isa/wavefront/wavefront.c
@@ -84,10 +84,9 @@
MODULE_PARM_DESC(use_cs4232_midi, "Use CS4232 MPU-401 interface (inaccessibly located inside your computer)");
static struct platform_device *platform_devices[SNDRV_CARDS];
-static int pnp_registered;
-
#ifdef CONFIG_PNP
+static int pnp_registered;
static struct pnp_card_device_id snd_wavefront_pnpids[] = {
/* Tropez */
@@ -695,8 +694,10 @@
{
int i;
+#ifdef CONFIG_PNP
if (pnp_registered)
pnp_unregister_card_driver(&wavefront_pnpc_driver);
+#endif
for (i = 0; i < ARRAY_SIZE(platform_devices); ++i)
platform_device_unregister(platform_devices[i]);
platform_driver_unregister(&snd_wavefront_driver);
@@ -725,11 +726,13 @@
cards++;
}
+#ifdef CONFIG_PNP
i = pnp_register_card_driver(&wavefront_pnpc_driver);
if (i >= 0) {
pnp_registered = 1;
cards += i;
}
+#endif
if (!cards) {
#ifdef MODULE
diff --git a/sound/isa/wavefront/wavefront_synth.c b/sound/isa/wavefront/wavefront_synth.c
index ed81eec..68aa091 100644
--- a/sound/isa/wavefront/wavefront_synth.c
+++ b/sound/isa/wavefront/wavefront_synth.c
@@ -866,7 +866,7 @@
divided by 2.
*/
- u16 sample_short;
+ u16 sample_short = 0;
u32 length;
u16 __user *data_end = NULL;
unsigned int i;
diff --git a/sound/oss/au1550_ac97.c b/sound/oss/au1550_ac97.c
index b963c55..bdee050 100644
--- a/sound/oss/au1550_ac97.c
+++ b/sound/oss/au1550_ac97.c
@@ -462,7 +462,7 @@
/* Wait for Transmit Busy to show disabled.
*/
do {
- stat = readl((void *)PSC_AC97STAT);
+ stat = au_readl(PSC_AC97STAT);
au_sync();
} while ((stat & PSC_AC97STAT_TB) != 0);
@@ -491,7 +491,7 @@
/* Wait for Receive Busy to show disabled.
*/
do {
- stat = readl((void *)PSC_AC97STAT);
+ stat = au_readl(PSC_AC97STAT);
au_sync();
} while ((stat & PSC_AC97STAT_RB) != 0);
@@ -541,7 +541,7 @@
/* Wait for Device ready.
*/
do {
- stat = readl((void *)PSC_AC97STAT);
+ stat = au_readl(PSC_AC97STAT);
au_sync();
} while ((stat & PSC_AC97STAT_DR) == 0);
}
@@ -573,7 +573,7 @@
/* Wait for Device ready.
*/
do {
- stat = readl((void *)PSC_AC97STAT);
+ stat = au_readl(PSC_AC97STAT);
au_sync();
} while ((stat & PSC_AC97STAT_DR) == 0);
}
@@ -1995,7 +1995,7 @@
/* Wait for PSC ready.
*/
do {
- val = readl((void *)PSC_AC97STAT);
+ val = au_readl(PSC_AC97STAT);
au_sync();
} while ((val & PSC_AC97STAT_SR) == 0);
@@ -2018,7 +2018,7 @@
/* Wait for Device ready.
*/
do {
- val = readl((void *)PSC_AC97STAT);
+ val = au_readl(PSC_AC97STAT);
au_sync();
} while ((val & PSC_AC97STAT_DR) == 0);
diff --git a/sound/oss/dmasound/tas_common.h b/sound/oss/dmasound/tas_common.h
index 3a6d486..0741c28 100644
--- a/sound/oss/dmasound/tas_common.h
+++ b/sound/oss/dmasound/tas_common.h
@@ -178,10 +178,10 @@
if (write_mode & WRITE_SHADOW)
memcpy(self->shadow[reg_num],data,reg_width);
if (write_mode & WRITE_HW) {
- rc=i2c_smbus_write_block_data(self->client,
- reg_num,
- reg_width,
- data);
+ rc=i2c_smbus_write_i2c_block_data(self->client,
+ reg_num,
+ reg_width,
+ data);
if (rc < 0) {
printk("tas: I2C block write failed \n");
return rc;
@@ -199,10 +199,10 @@
if (reg_width==0 || self==NULL)
return -EINVAL;
- rc=i2c_smbus_write_block_data(self->client,
- reg_num,
- reg_width,
- self->shadow[reg_num]);
+ rc=i2c_smbus_write_i2c_block_data(self->client,
+ reg_num,
+ reg_width,
+ self->shadow[reg_num]);
if (rc < 0) {
printk("tas: I2C block write failed \n");
return rc;
diff --git a/sound/oss/emu10k1/recmgr.c b/sound/oss/emu10k1/recmgr.c
index 67c3fd0..2ce5618 100644
--- a/sound/oss/emu10k1/recmgr.c
+++ b/sound/oss/emu10k1/recmgr.c
@@ -29,7 +29,7 @@
**********************************************************************
*/
-#include <asm/delay.h>
+#include <linux/delay.h>
#include "8010.h"
#include "recmgr.h"
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 4aa5fdc..a444a78 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -1621,8 +1621,27 @@
AC97_SINGLE("Line Jack Sense", AC97_AD_JACK_SPDIF, 12, 1, 0),
};
+/* black list to avoid HP/Line jack-sense controls
+ * (SS vendor << 16 | device)
+ */
+static unsigned int ad1981_jacks_blacklist[] = {
+ 0x10140554, /* Thinkpad T42p/R50p */
+ 0 /* end */
+};
+
+static int check_list(struct snd_ac97 *ac97, const unsigned int *list)
+{
+ u32 subid = ((u32)ac97->subsystem_vendor << 16) | ac97->subsystem_device;
+ for (; *list; list++)
+ if (*list == subid)
+ return 1;
+ return 0;
+}
+
static int patch_ad1981a_specific(struct snd_ac97 * ac97)
{
+ if (check_list(ac97, ad1981_jacks_blacklist))
+ return 0;
return patch_build_controls(ac97, snd_ac97_ad1981x_jack_sense,
ARRAY_SIZE(snd_ac97_ad1981x_jack_sense));
}
@@ -1635,22 +1654,26 @@
#endif
};
+/* white list to enable HP jack-sense bits
+ * (SS vendor << 16 | device)
+ */
+static unsigned int ad1981_jacks_whitelist[] = {
+ 0x0e11005a, /* HP nc4000/4010 */
+ 0x103c0890, /* HP nc6000 */
+ 0x103c0938, /* HP nc4220 */
+ 0x103c099c, /* HP nx6110 */
+ 0x103c0944, /* HP nc6220 */
+ 0x103c0934, /* HP nc8220 */
+ 0x103c006d, /* HP nx9105 */
+ 0x17340088, /* FSC Scenic-W */
+ 0 /* end */
+};
+
static void check_ad1981_hp_jack_sense(struct snd_ac97 *ac97)
{
- u32 subid = ((u32)ac97->subsystem_vendor << 16) | ac97->subsystem_device;
- switch (subid) {
- case 0x0e11005a: /* HP nc4000/4010 */
- case 0x103c0890: /* HP nc6000 */
- case 0x103c0938: /* HP nc4220 */
- case 0x103c099c: /* HP nx6110 */
- case 0x103c0944: /* HP nc6220 */
- case 0x103c0934: /* HP nc8220 */
- case 0x103c006d: /* HP nx9105 */
- case 0x17340088: /* FSC Scenic-W */
+ if (check_list(ac97, ad1981_jacks_whitelist))
/* enable headphone jack sense */
snd_ac97_update_bits(ac97, AC97_AD_JACK_SPDIF, 1<<11, 1<<11);
- break;
- }
}
int patch_ad1981a(struct snd_ac97 *ac97)
@@ -1672,6 +1695,8 @@
if ((err = patch_build_controls(ac97, &snd_ac97_ad198x_2cmic, 1)) < 0)
return err;
+ if (check_list(ac97, ad1981_jacks_blacklist))
+ return 0;
return patch_build_controls(ac97, snd_ac97_ad1981x_jack_sense,
ARRAY_SIZE(snd_ac97_ad1981x_jack_sense));
}
@@ -2210,9 +2235,9 @@
/* Vref disable (bit12), 1kOhm (bit13) */
snd_ac97_update_bits(ac97, AC97_ALC850_MISC1, (1<<12)|(1<<13),
shared ? (1<<12) : (1<<13));
- /* MIC-IN = 1, CENTER-LFE = 2 */
+ /* MIC-IN = 1, CENTER-LFE = 5 */
snd_ac97_update_bits(ac97, AC97_ALC850_JACK_SELECT, 7 << 4,
- shared ? (2<<4) : (1<<4));
+ shared ? (5<<4) : (1<<4));
}
static const struct snd_kcontrol_new snd_ac97_controls_alc850[] = {
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index bc4d1ef..e264136 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -279,7 +279,7 @@
};
static struct pci_device_id snd_ali_ids[] = {
- {0x10b9, 0x5451, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
+ {PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5451), 0, 0, 0},
{0, }
};
MODULE_DEVICE_TABLE(pci, snd_ali_ids);
diff --git a/sound/pci/au88x0/au88x0_eq.c b/sound/pci/au88x0/au88x0_eq.c
index 13bc8ed..c8280f8 100644
--- a/sound/pci/au88x0/au88x0_eq.c
+++ b/sound/pci/au88x0/au88x0_eq.c
@@ -849,7 +849,7 @@
snd_vortex_peaks_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
{
vortex_t *vortex = snd_kcontrol_chip(kcontrol);
- int i, count;
+ int i, count = 0;
u16 peaks[20];
vortex_Eqlzr_GetAllPeaks(vortex, peaks, &count);
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index dc9cd30..c840a4c 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -781,6 +781,8 @@
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_879, 0x0070, 0x13eb, 32000),
/* Viewcast Osprey 200 */
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x0070, 0xff01, 44100),
+ /* AVerMedia Studio No. 103, 203, ...? */
+ BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x1461, 0x0003, 48000),
{ }
};
MODULE_DEVICE_TABLE(pci, snd_bt87x_ids);
@@ -808,7 +810,7 @@
const struct pci_device_id *supported;
supported = pci_match_device(&driver, pci);
- if (supported)
+ if (supported && supported->driver_data > 0)
return supported->driver_data;
for (i = 0; i < ARRAY_SIZE(blacklist); ++i)
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 6ed7c0b..9477838 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -199,7 +199,8 @@
.name = "MSI K8N Diamond MB [SB0438]",
.gpio_type = 1,
.i2c_adc = 1 } ,
- /* Shuttle XPC SD31P which has an onboard Creative Labs Sound Blaster Live! 24-bit EAX
+ /* Shuttle XPC SD31P which has an onboard Creative Labs
+ * Sound Blaster Live! 24-bit EAX
* high-definition 7.1 audio processor".
* Added using info from andrewvegan in alsa bug #1298
*/
@@ -207,6 +208,15 @@
.name = "Shuttle XPC SD31P [SD31P]",
.gpio_type = 1,
.i2c_adc = 1 } ,
+ /* Shuttle XPC SD11G5 which has an onboard Creative Labs
+ * Sound Blaster Live! 24-bit EAX
+ * high-definition 7.1 audio processor".
+ * Fixes ALSA bug#1600
+ */
+ { .serial = 0x30411297,
+ .name = "Shuttle XPC SD11G5 [SD11G5]",
+ .gpio_type = 1,
+ .i2c_adc = 1 } ,
{ .serial = 0,
.name = "AudigyLS [Unknown]" }
};
diff --git a/sound/pci/cs46xx/dsp_spos_scb_lib.c b/sound/pci/cs46xx/dsp_spos_scb_lib.c
index 509aa2b..d4e0fb3 100644
--- a/sound/pci/cs46xx/dsp_spos_scb_lib.c
+++ b/sound/pci/cs46xx/dsp_spos_scb_lib.c
@@ -675,7 +675,7 @@
if (pass_through) {
/* wont work with any other rate than
the native DSP rate */
- snd_assert (rate = 48000);
+ snd_assert (rate == 48000);
scb = cs46xx_dsp_create_generic_scb(chip,scb_name,(u32 *)&src_task_scb,
dest,"DMAREADER",parent_scb,
diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c
index f36ede8..02e3721 100644
--- a/sound/pci/cs5535audio/cs5535audio.c
+++ b/sound/pci/cs5535audio/cs5535audio.c
@@ -46,8 +46,10 @@
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
static struct pci_device_id snd_cs5535audio_ids[] = {
- { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_AUDIO, PCI_ANY_ID,
- PCI_ANY_ID, 0, 0, 0, },
+ { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_AUDIO,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
+ { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
{}
};
diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c
index 2e86a90..2a9d12d 100644
--- a/sound/pci/emu10k1/emumixer.c
+++ b/sound/pci/emu10k1/emumixer.c
@@ -759,6 +759,8 @@
"Master Mono Playback Volume",
"PCM Out Path & Mute",
"Mono Output Select",
+ "Front Playback Switch",
+ "Front Playback Volume",
"Surround Playback Switch",
"Surround Playback Volume",
"Center Playback Switch",
@@ -829,9 +831,9 @@
}
if (emu->audigy) {
/* set master volume to 0 dB */
- snd_ac97_write(emu->ac97, AC97_MASTER, 0x0000);
+ snd_ac97_write_cache(emu->ac97, AC97_MASTER, 0x0000);
/* set capture source to mic */
- snd_ac97_write(emu->ac97, AC97_REC_SEL, 0x0000);
+ snd_ac97_write_cache(emu->ac97, AC97_REC_SEL, 0x0000);
c = audigy_remove_ctls;
} else {
/*
@@ -844,8 +846,8 @@
snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_CNTR|AC97SLOT_LFE|AC97SLOT_REAR_LEFT|AC97SLOT_REAR_RIGHT);
}
/* remove unused AC97 controls */
- snd_ac97_write(emu->ac97, AC97_SURROUND_MASTER, 0x0202);
- snd_ac97_write(emu->ac97, AC97_CENTER_LFE_MASTER, 0x0202);
+ snd_ac97_write_cache(emu->ac97, AC97_SURROUND_MASTER, 0x0202);
+ snd_ac97_write_cache(emu->ac97, AC97_CENTER_LFE_MASTER, 0x0202);
c = emu10k1_remove_ctls;
}
for (; *c; c++)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index a983deb..fd12b69 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -75,6 +75,7 @@
"{Intel, ICH6M},"
"{Intel, ICH7},"
"{Intel, ESB2},"
+ "{Intel, ICH8},"
"{ATI, SB450},"
"{VIA, VT8251},"
"{VIA, VT8237A},"
@@ -1586,6 +1587,7 @@
{ 0x8086, 0x2668, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH6 */
{ 0x8086, 0x27d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH7 */
{ 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ESB2 */
+ { 0x8086, 0x284b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH8 */
{ 0x1002, 0x437b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ATI }, /* ATI SB450 */
{ 0x1106, 0x3288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_VIA }, /* VIA VT8251/VT8237A */
{ 0x1039, 0x7502, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_SIS }, /* SIS966 */
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index ad9e501..b767552 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1668,6 +1668,7 @@
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x8196, .config = ALC880_6ST }, /* ASUS P5GD1-HVM */
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x81b4, .config = ALC880_6ST },
{ .pci_subvendor = 0x1019, .pci_subdevice = 0xa884, .config = ALC880_6ST }, /* Acer APFV */
+ { .pci_subvendor = 0x1458, .pci_subdevice = 0xa102, .config = ALC880_6ST }, /* Gigabyte K8N51 */
{ .modelname = "6stack-digout", .config = ALC880_6ST_DIG },
{ .pci_subvendor = 0x2668, .pci_subdevice = 0x8086, .config = ALC880_6ST_DIG },
@@ -2475,7 +2476,7 @@
/* LINE-2 is used for line-out in rear */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* select line-out */
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
/* LINE-OUT pin */
{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* enable HP */
@@ -2945,6 +2946,8 @@
*/
static struct hda_board_config alc260_cfg_tbl[] = {
{ .modelname = "basic", .config = ALC260_BASIC },
+ { .pci_subvendor = 0x104d, .pci_subdevice = 0x81bb,
+ .config = ALC260_BASIC }, /* Sony VAIO */
{ .modelname = "hp", .config = ALC260_HP },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3010, .config = ALC260_HP },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3011, .config = ALC260_HP },
@@ -3414,12 +3417,12 @@
* configuration and preset
*/
static struct hda_board_config alc882_cfg_tbl[] = {
- { .modelname = "3stack-dig", .config = ALC861_3ST_DIG },
- { .modelname = "6stack-dig", .config = ALC861_6ST_DIG },
+ { .modelname = "3stack-dig", .config = ALC882_3ST_DIG },
+ { .modelname = "6stack-dig", .config = ALC882_6ST_DIG },
{ .pci_subvendor = 0x1462, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* MSI */
{ .pci_subvendor = 0x105b, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* Foxconn */
{ .pci_subvendor = 0x1019, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* ECS */
- { .modelname = "auto", .config = ALC861_AUTO },
+ { .modelname = "auto", .config = ALC882_AUTO },
{}
};
diff --git a/sound/pci/hda/patch_si3054.c b/sound/pci/hda/patch_si3054.c
index 8f8840e..250242c 100644
--- a/sound/pci/hda/patch_si3054.c
+++ b/sound/pci/hda/patch_si3054.c
@@ -297,6 +297,7 @@
struct hda_codec_preset snd_hda_preset_si3054[] = {
{ .id = 0x163c3055, .name = "Si3054", .patch = patch_si3054 },
{ .id = 0x163c3155, .name = "Si3054", .patch = patch_si3054 },
+ { .id = 0x11c13026, .name = "Si3054", .patch = patch_si3054 },
{}
};
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 6190384..35c2823 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -50,10 +50,11 @@
unsigned int surr_switch: 1;
unsigned int line_switch: 1;
unsigned int mic_switch: 1;
+ unsigned int alt_switch: 1;
/* playback */
struct hda_multi_out multiout;
- hda_nid_t dac_nids[4];
+ hda_nid_t dac_nids[5];
/* capture */
hda_nid_t *adc_nids;
@@ -73,7 +74,7 @@
/* capture source */
struct hda_input_mux *input_mux;
- unsigned int cur_mux[2];
+ unsigned int cur_mux[3];
/* i/o switches */
unsigned int io_switch[2];
@@ -107,6 +108,14 @@
0x12, 0x13,
};
+static hda_nid_t stac927x_adc_nids[3] = {
+ 0x07, 0x08, 0x09
+};
+
+static hda_nid_t stac927x_mux_nids[3] = {
+ 0x15, 0x16, 0x17
+};
+
static hda_nid_t stac9200_pin_nids[8] = {
0x08, 0x09, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12,
};
@@ -116,6 +125,12 @@
0x0f, 0x10, 0x11, 0x15, 0x1b,
};
+static hda_nid_t stac927x_pin_nids[14] = {
+ 0x0a, 0x0b, 0x0c, 0x0d, 0x0e,
+ 0x0f, 0x10, 0x11, 0x12, 0x13,
+ 0x14, 0x21, 0x22, 0x23,
+};
+
static int stac92xx_mux_enum_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
@@ -155,6 +170,12 @@
{}
};
+static struct hda_verb stac927x_core_init[] = {
+ /* set master volume and direct control */
+ { 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
+ {}
+};
+
static struct snd_kcontrol_new stac9200_mixer[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0xb, 0, HDA_OUTPUT),
HDA_CODEC_MUTE("Master Playback Switch", 0xb, 0, HDA_OUTPUT),
@@ -183,10 +204,26 @@
.put = stac92xx_mux_enum_put,
},
HDA_CODEC_VOLUME("Capture Volume", 0x17, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x17, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Mux Capture Volume", 0x12, 0x0, HDA_OUTPUT),
{ } /* end */
};
+static snd_kcontrol_new_t stac927x_mixer[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Input Source",
+ .count = 1,
+ .info = stac92xx_mux_enum_info,
+ .get = stac92xx_mux_enum_get,
+ .put = stac92xx_mux_enum_put,
+ },
+ HDA_CODEC_VOLUME("InMux Capture Volume", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("InVol Capture Volume", 0x18, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("ADCMux Capture Switch", 0x1b, 0x0, HDA_OUTPUT),
+ { } /* end */
+};
+
static int stac92xx_build_controls(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
@@ -240,14 +277,14 @@
};
static unsigned int d945gtp3_pin_configs[10] = {
- 0x0221401f, 0x01a19022, 0x01813021, 0x01114010,
+ 0x0221401f, 0x01a19022, 0x01813021, 0x01014010,
0x40000100, 0x40000100, 0x40000100, 0x40000100,
0x02a19120, 0x40000100,
};
static unsigned int d945gtp5_pin_configs[10] = {
- 0x0221401f, 0x01111012, 0x01813024, 0x01114010,
- 0x01a19021, 0x01116011, 0x01452130, 0x40000100,
+ 0x0221401f, 0x01011012, 0x01813024, 0x01014010,
+ 0x01a19021, 0x01016011, 0x01452130, 0x40000100,
0x02a19320, 0x40000100,
};
@@ -274,6 +311,28 @@
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x0013,
.config = STAC_D945GTP5 }, /* Intel D955XBK - 5 Stack */
+ { .pci_subvendor = PCI_VENDOR_ID_INTEL,
+ .pci_subdevice = 0x0417,
+ .config = STAC_D945GTP5 }, /* Intel D975XBK - 5 Stack */
+ {} /* terminator */
+};
+
+static unsigned int ref927x_pin_configs[14] = {
+ 0x01813122, 0x01a19021, 0x01014010, 0x01016011,
+ 0x01012012, 0x01011014, 0x40000100, 0x40000100,
+ 0x40000100, 0x40000100, 0x40000100, 0x01441030,
+ 0x01c41030, 0x40000100,
+};
+
+static unsigned int *stac927x_brd_tbl[] = {
+ ref927x_pin_configs,
+};
+
+static struct hda_board_config stac927x_cfg_tbl[] = {
+ { .modelname = "ref",
+ .pci_subvendor = PCI_VENDOR_ID_INTEL,
+ .pci_subdevice = 0x2668, /* DFI LanParty */
+ .config = STAC_REF }, /* SigmaTel reference board */
{} /* terminator */
};
@@ -408,11 +467,23 @@
},
};
+static struct hda_pcm_stream stac92xx_pcm_analog_alt_playback = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 2,
+ .nid = 0x06, /* NID to query formats and rates */
+ .ops = {
+ .open = stac92xx_playback_pcm_open,
+ .prepare = stac92xx_playback_pcm_prepare,
+ .cleanup = stac92xx_playback_pcm_cleanup
+ },
+};
+
static struct hda_pcm_stream stac92xx_pcm_analog_capture = {
.substreams = 2,
.channels_min = 2,
.channels_max = 2,
- .nid = 0x06, /* NID to query formats and rates */
+ /* NID is set in stac92xx_build_pcms */
.ops = {
.prepare = stac92xx_capture_pcm_prepare,
.cleanup = stac92xx_capture_pcm_cleanup
@@ -430,6 +501,14 @@
info->name = "STAC92xx Analog";
info->stream[SNDRV_PCM_STREAM_PLAYBACK] = stac92xx_pcm_analog_playback;
info->stream[SNDRV_PCM_STREAM_CAPTURE] = stac92xx_pcm_analog_capture;
+ info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[0];
+
+ if (spec->alt_switch) {
+ codec->num_pcms++;
+ info++;
+ info->name = "STAC92xx Analog Alt";
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK] = stac92xx_pcm_analog_alt_playback;
+ }
if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
codec->num_pcms++;
@@ -588,6 +667,16 @@
return 0;
}
+/*
+ * XXX The line_out pin widget connection list may not be set to the
+ * desired DAC nid. This is the case on 927x where ports A and B can
+ * be routed to several DACs.
+ *
+ * This requires an analysis of the line-out/hp pin configuration
+ * to provide a best fit for pin/DAC configurations that are routable.
+ * For now, 927x DAC4 is not supported and 927x DAC1 output to ports
+ * A and B is not supported.
+ */
/* fill in the dac_nids table from the parsed pin configuration */
static int stac92xx_auto_fill_dac_nids(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
{
@@ -602,7 +691,13 @@
AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
}
- spec->multiout.num_dacs = cfg->line_outs;
+ if (cfg->line_outs)
+ spec->multiout.num_dacs = cfg->line_outs;
+ else if (cfg->hp_pin) {
+ spec->multiout.dac_nids[0] = snd_hda_codec_read(codec, cfg->hp_pin, 0,
+ AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
+ spec->multiout.num_dacs = 1;
+ }
return 0;
}
@@ -753,19 +848,21 @@
stac92xx_auto_set_pinctl(codec, pin, AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN);
}
-static int stac922x_parse_auto_config(struct hda_codec *codec)
+static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out, hda_nid_t dig_in)
{
struct sigmatel_spec *spec = codec->spec;
int err;
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL)) < 0)
return err;
+ if (! spec->autocfg.line_outs && ! spec->autocfg.hp_pin)
+ return 0; /* can't find valid pin config */
+ stac92xx_auto_init_multi_out(codec);
+ stac92xx_auto_init_hp_out(codec);
if ((err = stac92xx_add_dyn_out_pins(codec, &spec->autocfg)) < 0)
return err;
if ((err = stac92xx_auto_fill_dac_nids(codec, &spec->autocfg)) < 0)
return err;
- if (! spec->autocfg.line_outs && ! spec->autocfg.hp_pin)
- return 0; /* can't find valid pin config */
if ((err = stac92xx_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
(err = stac92xx_auto_create_hp_ctls(codec, &spec->autocfg)) < 0 ||
@@ -777,11 +874,11 @@
spec->surr_switch = 1;
if (spec->autocfg.dig_out_pin) {
- spec->multiout.dig_out_nid = 0x08;
+ spec->multiout.dig_out_nid = dig_out;
stac92xx_auto_set_pinctl(codec, spec->autocfg.dig_out_pin, AC_PINCTL_OUT_EN);
}
if (spec->autocfg.dig_in_pin) {
- spec->dig_in_nid = 0x09;
+ spec->dig_in_nid = dig_in;
stac92xx_auto_set_pinctl(codec, spec->autocfg.dig_in_pin, AC_PINCTL_IN_EN);
}
@@ -827,9 +924,6 @@
snd_hda_sequence_write(codec, spec->init);
- stac92xx_auto_init_multi_out(codec);
- stac92xx_auto_init_hp_out(codec);
-
return 0;
}
@@ -996,7 +1090,47 @@
spec->multiout.dac_nids = spec->dac_nids;
- err = stac922x_parse_auto_config(codec);
+ err = stac92xx_parse_auto_config(codec, 0x08, 0x09);
+ if (err < 0) {
+ stac92xx_free(codec);
+ return err;
+ }
+
+ codec->patch_ops = stac92xx_patch_ops;
+
+ return 0;
+}
+
+static int patch_stac927x(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec;
+ int err;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (spec == NULL)
+ return -ENOMEM;
+
+ codec->spec = spec;
+ spec->board_config = snd_hda_check_board_config(codec, stac927x_cfg_tbl);
+ if (spec->board_config < 0)
+ snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC927x, using BIOS defaults\n");
+ else {
+ spec->num_pins = 14;
+ spec->pin_nids = stac927x_pin_nids;
+ spec->pin_configs = stac927x_brd_tbl[spec->board_config];
+ stac92xx_set_config_regs(codec);
+ }
+
+ spec->adc_nids = stac927x_adc_nids;
+ spec->mux_nids = stac927x_mux_nids;
+ spec->num_muxes = 3;
+
+ spec->init = stac927x_core_init;
+ spec->mixer = stac927x_mixer;
+
+ spec->multiout.dac_nids = spec->dac_nids;
+
+ err = stac92xx_parse_auto_config(codec, 0x1e, 0x20);
if (err < 0) {
stac92xx_free(codec);
return err;
@@ -1018,5 +1152,15 @@
{ .id = 0x83847681, .name = "STAC9220D/9223D A2", .patch = patch_stac922x },
{ .id = 0x83847682, .name = "STAC9221 A2", .patch = patch_stac922x },
{ .id = 0x83847683, .name = "STAC9221D A2", .patch = patch_stac922x },
+ { .id = 0x83847620, .name = "STAC9274", .patch = patch_stac927x },
+ { .id = 0x83847621, .name = "STAC9274D", .patch = patch_stac927x },
+ { .id = 0x83847622, .name = "STAC9273X", .patch = patch_stac927x },
+ { .id = 0x83847623, .name = "STAC9273D", .patch = patch_stac927x },
+ { .id = 0x83847624, .name = "STAC9272X", .patch = patch_stac927x },
+ { .id = 0x83847625, .name = "STAC9272D", .patch = patch_stac927x },
+ { .id = 0x83847626, .name = "STAC9271X", .patch = patch_stac927x },
+ { .id = 0x83847627, .name = "STAC9271D", .patch = patch_stac927x },
+ { .id = 0x83847628, .name = "STAC9274X5NH", .patch = patch_stac927x },
+ { .id = 0x83847629, .name = "STAC9274D5NH", .patch = patch_stac927x },
{} /* terminator */
};
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 5466b1f..174237f 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -427,6 +427,7 @@
{ 0x10de, 0x008a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* CK8 */
{ 0x10de, 0x00da, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE3 */
{ 0x10de, 0x00ea, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* CK8S */
+ { 0x10de, 0x026b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* MCP51 */
{ 0x1022, 0x746d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* AMD8111 */
{ 0x1022, 0x7445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* AMD768 */
{ 0x10b9, 0x5455, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALI }, /* Ali5455 */
@@ -1805,6 +1806,12 @@
},
{
.subvendor = 0x1028,
+ .subdevice = 0x0151,
+ .name = "Dell Optiplex GX270", /* AD1981B */
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .subvendor = 0x1028,
.subdevice = 0x0163,
.name = "Dell Unknown", /* STAC9750/51 */
.type = AC97_TUNE_HP_ONLY
@@ -1847,12 +1854,6 @@
},
{
.subvendor = 0x103c,
- .subdevice = 0x099c,
- .name = "HP nx6110", /* AD1981B */
- .type = AC97_TUNE_HP_ONLY
- },
- {
- .subvendor = 0x103c,
.subdevice = 0x129d,
.name = "HP xw8000",
.type = AC97_TUNE_HP_ONLY
@@ -1866,7 +1867,7 @@
{
.subvendor = 0x103c,
.subdevice = 0x099c,
- .name = "HP nc6120",
+ .name = "HP nx6110/nc6120",
.type = AC97_TUNE_HP_MUTE_LED
},
{
diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c
index b8c0853..b2cba75 100644
--- a/sound/pci/pcxhr/pcxhr.c
+++ b/sound/pci/pcxhr/pcxhr.c
@@ -454,7 +454,7 @@
is_capture = (subs->stream == SNDRV_PCM_STREAM_CAPTURE);
stream_num = is_capture ? 0 : subs->number;
- snd_printdd("pcxhr_update_r_buffer(pcm%c%d) : addr(%p) bytes(%x) subs(%d)\n",
+ snd_printdd("pcxhr_update_r_buffer(pcm%c%d) : addr(%p) bytes(%zx) subs(%d)\n",
is_capture ? 'c' : 'p',
chip->chip_idx, (void*)subs->runtime->dma_addr,
subs->runtime->dma_bytes, subs->number);
@@ -744,13 +744,14 @@
/* only the first stream can choose the sample rate */
/* the further opened streams will be limited to its frequency (see open) */
/* set the clock only once (first stream) */
- if (mgr->sample_rate == 0) {
+ if (mgr->sample_rate != subs->runtime->rate) {
err = pcxhr_set_clock(mgr, subs->runtime->rate);
if (err)
break;
+ if (mgr->sample_rate == 0)
+ /* start the DSP-timer */
+ err = pcxhr_hardware_timer(mgr, 1);
mgr->sample_rate = subs->runtime->rate;
-
- err = pcxhr_hardware_timer(mgr, 1); /* start the DSP-timer */
}
} while(0); /* do only once (so we can use break instead of goto) */
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 3dec616..103b4d7 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -3324,11 +3324,11 @@
snd_dma_pci_data(hdspm->pci),
wanted,
wanted)) < 0) {
- snd_printdd("Could not preallocate %d Bytes\n", wanted);
+ snd_printdd("Could not preallocate %zd Bytes\n", wanted);
return err;
} else
- snd_printdd(" Preallocated %d Bytes\n", wanted);
+ snd_printdd(" Preallocated %zd Bytes\n", wanted);
return 0;
}
@@ -3510,7 +3510,7 @@
hdspm->monitor_outs = enable_monitor;
- snd_printdd("kmalloc Mixer memory of %d Bytes\n",
+ snd_printdd("kmalloc Mixer memory of %zd Bytes\n",
sizeof(struct hdspm_mixer));
if ((hdspm->mixer = kmalloc(sizeof(struct hdspm_mixer), GFP_KERNEL))
== NULL) {
diff --git a/sound/pci/trident/trident.c b/sound/pci/trident/trident.c
index 2b21df1..b453804 100644
--- a/sound/pci/trident/trident.c
+++ b/sound/pci/trident/trident.c
@@ -64,9 +64,11 @@
MODULE_PARM_DESC(wavetable_size, "Maximum memory size in kB for wavetable synth.");
static struct pci_device_id snd_trident_ids[] = {
- { 0x1023, 0x2000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* Trident 4DWave DX PCI Audio */
- { 0x1023, 0x2001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* Trident 4DWave NX PCI Audio */
- { 0x1039, 0x7018, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* SiS SI7018 PCI Audio */
+ {PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_TRIDENT_4DWAVE_DX),
+ PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0},
+ {PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_TRIDENT_4DWAVE_NX),
+ 0, 0, 0},
+ {PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_7018), 0, 0, 0},
{ 0, }
};
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index ed26a15..4237413 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -2340,6 +2340,7 @@
{ .subvendor = 0x1043, .subdevice = 0x80b0, .action = VIA_DXS_NO_VRA }, /* ASUS A7V600 & K8V*/
{ .subvendor = 0x1043, .subdevice = 0x810d, .action = VIA_DXS_SRC }, /* ASUS */
{ .subvendor = 0x1043, .subdevice = 0x812a, .action = VIA_DXS_SRC }, /* ASUS A8V Deluxe */
+ { .subvendor = 0x1043, .subdevice = 0x8174, .action = VIA_DXS_SRC }, /* ASUS */
{ .subvendor = 0x1071, .subdevice = 0x8375, .action = VIA_DXS_NO_VRA }, /* Vobis/Yakumo/Mitac notebook */
{ .subvendor = 0x1071, .subdevice = 0x8399, .action = VIA_DXS_NO_VRA }, /* Umax AB 595T (VIA K8N800A - VT8237) */
{ .subvendor = 0x10cf, .subdevice = 0x118e, .action = VIA_DXS_ENABLE }, /* FSC laptop */
@@ -2358,6 +2359,7 @@
{ .subvendor = 0x1462, .subdevice = 0x7023, .action = VIA_DXS_NO_VRA }, /* MSI K8T Neo2-FI */
{ .subvendor = 0x1462, .subdevice = 0x7120, .action = VIA_DXS_ENABLE }, /* MSI KT4V */
{ .subvendor = 0x1462, .subdevice = 0x7142, .action = VIA_DXS_ENABLE }, /* MSI K8MM-V */
+ { .subvendor = 0x1462, .subdevice = 0xb012, .action = VIA_DXS_SRC }, /* P4M800/VIA8237R */
{ .subvendor = 0x147b, .subdevice = 0x1401, .action = VIA_DXS_ENABLE }, /* ABIT KD7(-RAID) */
{ .subvendor = 0x147b, .subdevice = 0x1411, .action = VIA_DXS_ENABLE }, /* ABIT VA-20 */
{ .subvendor = 0x147b, .subdevice = 0x1413, .action = VIA_DXS_ENABLE }, /* ABIT KV8 Pro */
@@ -2371,6 +2373,9 @@
{ .subvendor = 0x161f, .subdevice = 0x2032, .action = VIA_DXS_48K }, /* m680x machines */
{ .subvendor = 0x1631, .subdevice = 0xe004, .action = VIA_DXS_ENABLE }, /* Easy Note 3174, Packard Bell */
{ .subvendor = 0x1695, .subdevice = 0x3005, .action = VIA_DXS_ENABLE }, /* EPoX EP-8K9A */
+ { .subvendor = 0x1695, .subdevice = 0x300e, .action = VIA_DXS_SRC }, /* EPoX 9HEAI */
+ { .subvendor = 0x16f3, .subdevice = 0x6405, .action = VIA_DXS_SRC }, /* Jetway K8M8MS */
+ { .subvendor = 0x1734, .subdevice = 0x1093, .action = VIA_DXS_SRC }, /* FSC */
{ .subvendor = 0x1849, .subdevice = 0x3059, .action = VIA_DXS_NO_VRA }, /* ASRock K7VM2 */
{ .subvendor = 0x1849, .subdevice = 0x9761, .action = VIA_DXS_SRC }, /* ASRock mobo(?) */
{ .subvendor = 0x1919, .subdevice = 0x200a, .action = VIA_DXS_NO_VRA }, /* Soltek SL-K8Tpro-939 */
diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c
index 1dfc723..a1aa74b 100644
--- a/sound/pci/ymfpci/ymfpci_main.c
+++ b/sound/pci/ymfpci/ymfpci_main.c
@@ -1229,6 +1229,7 @@
spin_lock_irq(&chip->reg_lock);
ucontrol->value.iec958.status[0] = (chip->spdif_bits >> 0) & 0xff;
ucontrol->value.iec958.status[1] = (chip->spdif_bits >> 8) & 0xff;
+ ucontrol->value.iec958.status[3] = IEC958_AES3_CON_FS_48000;
spin_unlock_irq(&chip->reg_lock);
return 0;
}
@@ -1303,6 +1304,7 @@
spin_lock_irq(&chip->reg_lock);
ucontrol->value.iec958.status[0] = (chip->spdif_pcm_bits >> 0) & 0xff;
ucontrol->value.iec958.status[1] = (chip->spdif_pcm_bits >> 8) & 0xff;
+ ucontrol->value.iec958.status[3] = IEC958_AES3_CON_FS_48000;
spin_unlock_irq(&chip->reg_lock);
return 0;
}
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index a642e4c..aa57170 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -66,7 +66,7 @@
static void snd_pmac_dbdma_free(struct snd_pmac *chip, struct pmac_dbdma *rec)
{
- if (rec) {
+ if (rec->space) {
unsigned int rsize = sizeof(struct dbdma_cmd) * (rec->size + 1);
dma_free_coherent(&chip->pdev->dev, rsize, rec->space, rec->dma_base);
@@ -881,6 +881,7 @@
chip->can_capture = 1;
chip->num_freqs = ARRAY_SIZE(awacs_freqs);
chip->freq_table = awacs_freqs;
+ chip->pdev = NULL;
chip->control_mask = MASK_IEPC | MASK_IEE | 0x11; /* default */
@@ -1216,7 +1217,7 @@
goto __error;
}
for (i = 0; i < 3; i ++) {
- if (of_address_to_resource(np->parent, i,
+ if (of_address_to_resource(np, i,
&chip->rsrc[i])) {
printk(KERN_ERR "snd: can't translate rsrc "
" %d (%s)\n", i, rnames[i]);
diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c
index 15c63cb..838fc11 100644
--- a/sound/ppc/tumbler.c
+++ b/sound/ppc/tumbler.c
@@ -239,8 +239,8 @@
block[4] = (right_vol >> 8) & 0xff;
block[5] = (right_vol >> 0) & 0xff;
- if (i2c_smbus_write_block_data(mix->i2c.client, TAS_REG_VOL,
- 6, block) < 0) {
+ if (i2c_smbus_write_i2c_block_data(mix->i2c.client, TAS_REG_VOL, 6,
+ block) < 0) {
snd_printk("failed to set volume \n");
return -EINVAL;
}
@@ -345,8 +345,8 @@
val[1] = 0;
}
- if (i2c_smbus_write_block_data(mix->i2c.client, TAS_REG_DRC,
- 2, val) < 0) {
+ if (i2c_smbus_write_i2c_block_data(mix->i2c.client, TAS_REG_DRC,
+ 2, val) < 0) {
snd_printk("failed to set DRC\n");
return -EINVAL;
}
@@ -381,8 +381,8 @@
val[4] = 0x60;
val[5] = 0xa0;
- if (i2c_smbus_write_block_data(mix->i2c.client, TAS_REG_DRC,
- 6, val) < 0) {
+ if (i2c_smbus_write_i2c_block_data(mix->i2c.client, TAS_REG_DRC,
+ 6, val) < 0) {
snd_printk("failed to set DRC\n");
return -EINVAL;
}
@@ -492,8 +492,8 @@
vol = info->table[vol];
for (i = 0; i < info->bytes; i++)
block[i] = (vol >> ((info->bytes - i - 1) * 8)) & 0xff;
- if (i2c_smbus_write_block_data(mix->i2c.client, info->reg,
- info->bytes, block) < 0) {
+ if (i2c_smbus_write_i2c_block_data(mix->i2c.client, info->reg,
+ info->bytes, block) < 0) {
snd_printk("failed to set mono volume %d\n", info->index);
return -EINVAL;
}
@@ -625,7 +625,8 @@
for (j = 0; j < 3; j++)
block[i * 3 + j] = (vol >> ((2 - j) * 8)) & 0xff;
}
- if (i2c_smbus_write_block_data(mix->i2c.client, reg, 9, block) < 0) {
+ if (i2c_smbus_write_i2c_block_data(mix->i2c.client, reg,
+ 9, block) < 0) {
snd_printk("failed to set mono volume %d\n", reg);
return -EINVAL;
}
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index a1bd804..d501338 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -478,22 +478,38 @@
/*
* Prepare urb for streaming before playback starts.
*
- * We don't care about (or have) any data, so we just send a transfer delimiter.
+ * We don't yet have data, so we send a frame of silence.
*/
static int prepare_startup_playback_urb(struct snd_usb_substream *subs,
struct snd_pcm_runtime *runtime,
struct urb *urb)
{
- unsigned int i;
+ unsigned int i, offs, counts;
struct snd_urb_ctx *ctx = urb->context;
+ int stride = runtime->frame_bits >> 3;
+ offs = 0;
urb->dev = ctx->subs->dev;
urb->number_of_packets = subs->packs_per_ms;
for (i = 0; i < subs->packs_per_ms; ++i) {
- urb->iso_frame_desc[i].offset = 0;
- urb->iso_frame_desc[i].length = 0;
+ /* calculate the size of a packet */
+ if (subs->fill_max)
+ counts = subs->maxframesize; /* fixed */
+ else {
+ subs->phase = (subs->phase & 0xffff)
+ + (subs->freqm << subs->datainterval);
+ counts = subs->phase >> 16;
+ if (counts > subs->maxframesize)
+ counts = subs->maxframesize;
+ }
+ urb->iso_frame_desc[i].offset = offs * stride;
+ urb->iso_frame_desc[i].length = counts * stride;
+ offs += counts;
}
- urb->transfer_buffer_length = 0;
+ urb->transfer_buffer_length = offs * stride;
+ memset(urb->transfer_buffer,
+ subs->cur_audiofmt->format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0,
+ offs * stride);
return 0;
}
@@ -2477,12 +2493,13 @@
if (err < 0)
return err;
#if 1
- /* FIXME: temporary hack for extigy/audigy 2 nx */
+ /* FIXME: temporary hack for extigy/audigy 2 nx/zs */
/* extigy apparently supports sample rates other than 48k
* but not in ordinary way. so we enable only 48k atm.
*/
if (chip->usb_id == USB_ID(0x041e, 0x3000) ||
- chip->usb_id == USB_ID(0x041e, 0x3020)) {
+ chip->usb_id == USB_ID(0x041e, 0x3020) ||
+ chip->usb_id == USB_ID(0x041e, 0x3061)) {
if (fmt[3] == USB_FORMAT_TYPE_I &&
fp->rates != SNDRV_PCM_RATE_48000 &&
fp->rates != SNDRV_PCM_RATE_96000)