libata-sff: make BMDMA optional
Make BMDMA optional depending on new config variable CONFIG_ATA_BMDMA.
In Kconfig, drivers are grouped into five groups - non-SFF native, SFF
w/ custom DMA interface, SFF w/ BMDMA, PIO-only SFF, and generic
fallback / legacy ones. Kconfig and Makefile are reorganized
according to the groups and ordered alphabetically inside each group.
ata_ioports.bmdma_addr and ata_port.bmdma_prd[_dma] are put into
CONFIG_ATA_BMDMA, as are all bmdma related ops, variables and
functions.
This increase the binary size slightly when BMDMA is enabled but on
both native-only and PIO-only configurations the size is slightly
reduced. Either way, the size difference is insignificant. This
change is more meaningful to signify the separation between SFF and
BMDMA and as a tool to verify the separation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index e68541f..73f8833 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -57,6 +57,8 @@
This option adds support for SATA Port Multipliers
(the SATA version of an ethernet hub, or SAS expander).
+comment "Controllers with non-SFF native interface"
+
config SATA_AHCI
tristate "AHCI SATA support"
depends on PCI
@@ -73,11 +75,12 @@
If unsure, say N.
-config SATA_SIL24
- tristate "Silicon Image 3124/3132 SATA support"
- depends on PCI
+config SATA_FSL
+ tristate "Freescale 3.0Gbps SATA support"
+ depends on FSL_SOC
help
- This option enables support for Silicon Image 3124/3132 Serial ATA.
+ This option enables support for Freescale 3.0Gbps SATA controller.
+ It can be found on MPC837x and MPC8315.
If unsure, say N.
@@ -87,12 +90,11 @@
help
This option enables support for Initio 162x Serial ATA.
-config SATA_FSL
- tristate "Freescale 3.0Gbps SATA support"
- depends on FSL_SOC
+config SATA_SIL24
+ tristate "Silicon Image 3124/3132 SATA support"
+ depends on PCI
help
- This option enables support for Freescale 3.0Gbps SATA controller.
- It can be found on MPC837x and MPC8315.
+ This option enables support for Silicon Image 3124/3132 Serial ATA.
If unsure, say N.
@@ -116,15 +118,65 @@
if ATA_SFF
-config SATA_SVW
- tristate "ServerWorks Frodo / Apple K2 SATA support"
+comment "SFF controllers with custom DMA interface"
+
+config PDC_ADMA
+ tristate "Pacific Digital ADMA support"
depends on PCI
help
- This option enables support for Broadcom/Serverworks/Apple K2
- SATA support.
+ This option enables support for Pacific Digital ADMA controllers
If unsure, say N.
+config PATA_MPC52xx
+ tristate "Freescale MPC52xx SoC internal IDE"
+ depends on PPC_MPC52xx && PPC_BESTCOMM
+ select PPC_BESTCOMM_ATA
+ help
+ This option enables support for integrated IDE controller
+ of the Freescale MPC52xx SoC.
+
+ If unsure, say N.
+
+config PATA_OCTEON_CF
+ tristate "OCTEON Boot Bus Compact Flash support"
+ depends on CPU_CAVIUM_OCTEON
+ help
+ This option enables a polled compact flash driver for use with
+ compact flash cards attached to the OCTEON boot bus.
+
+ If unsure, say N.
+
+config SATA_QSTOR
+ tristate "Pacific Digital SATA QStor support"
+ depends on PCI
+ help
+ This option enables support for Pacific Digital Serial ATA QStor.
+
+ If unsure, say N.
+
+config SATA_SX4
+ tristate "Promise SATA SX4 support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for Promise Serial ATA SX4.
+
+ If unsure, say N.
+
+config ATA_BMDMA
+ bool "ATA BMDMA support"
+ default y
+ help
+ This option adds support for SFF ATA controllers with BMDMA
+ capability. BMDMA stands for bus-master DMA and the
+ de-facto DMA interface for SFF controllers.
+
+ If unuser, say Y.
+
+if ATA_BMDMA
+
+comment "SATA SFF controllers with BMDMA"
+
config ATA_PIIX
tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
depends on PCI
@@ -152,22 +204,6 @@
If unsure, say N.
-config PDC_ADMA
- tristate "Pacific Digital ADMA support"
- depends on PCI
- help
- This option enables support for Pacific Digital ADMA controllers
-
- If unsure, say N.
-
-config SATA_QSTOR
- tristate "Pacific Digital SATA QStor support"
- depends on PCI
- help
- This option enables support for Pacific Digital Serial ATA QStor.
-
- If unsure, say N.
-
config SATA_PROMISE
tristate "Promise SATA TX2/TX4 support"
depends on PCI
@@ -176,14 +212,6 @@
If unsure, say N.
-config SATA_SX4
- tristate "Promise SATA SX4 support (Experimental)"
- depends on PCI && EXPERIMENTAL
- help
- This option enables support for Promise Serial ATA SX4.
-
- If unsure, say N.
-
config SATA_SIL
tristate "Silicon Image SATA support"
depends on PCI
@@ -203,6 +231,15 @@
enable the PATA_SIS driver in the config.
If unsure, say N.
+config SATA_SVW
+ tristate "ServerWorks Frodo / Apple K2 SATA support"
+ depends on PCI
+ help
+ This option enables support for Broadcom/Serverworks/Apple K2
+ SATA support.
+
+ If unsure, say N.
+
config SATA_ULI
tristate "ULi Electronics SATA support"
depends on PCI
@@ -227,14 +264,7 @@
If unsure, say N.
-config PATA_ACPI
- tristate "ACPI firmware driver for PATA"
- depends on ATA_ACPI
- help
- This option enables an ACPI method driver which drives
- motherboard PATA controller interfaces through the ACPI
- firmware in the BIOS. This driver can sometimes handle
- otherwise unsupported hardware.
+comment "PATA SFF controllers with BMDMA"
config PATA_ALI
tristate "ALi PATA support"
@@ -262,24 +292,6 @@
If unsure, say N.
-config PATA_ATP867X
- tristate "ARTOP/Acard ATP867X PATA support"
- depends on PCI
- help
- This option enables support for ARTOP/Acard ATP867X PATA
- controllers.
-
- If unsure, say N.
-
-config PATA_AT32
- tristate "Atmel AVR32 PATA support (Experimental)"
- depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
- help
- This option enables support for the IDE devices on the
- Atmel AT32AP platform.
-
- If unsure, say N.
-
config PATA_ATIIXP
tristate "ATI PATA support"
depends on PCI
@@ -289,13 +301,21 @@
If unsure, say N.
-config PATA_CMD640_PCI
- tristate "CMD640 PCI PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+config PATA_ATP867X
+ tristate "ARTOP/Acard ATP867X PATA support"
+ depends on PCI
help
- This option enables support for the CMD640 PCI IDE
- interface chip. Only the primary channel is currently
- supported.
+ This option enables support for ARTOP/Acard ATP867X PATA
+ controllers.
+
+ If unsure, say N.
+
+config PATA_BF54X
+ tristate "Blackfin 54x ATAPI support"
+ depends on BF542 || BF548 || BF549
+ help
+ This option enables support for the built-in ATAPI controller on
+ Blackfin 54x family chips.
If unsure, say N.
@@ -362,15 +382,6 @@
If unsure, say N.
-config ATA_GENERIC
- tristate "Generic ATA support"
- depends on PCI
- help
- This option enables support for generic BIOS configured
- ATA controllers via the new ATA layer
-
- If unsure, say N.
-
config PATA_HPT366
tristate "HPT 366/368 PATA support"
depends on PCI
@@ -415,12 +426,20 @@
controllers. Enable with care as there are still some
problems with DMA on this chipset.
-config PATA_ISAPNP
- tristate "ISA Plug and Play PATA support"
- depends on ISAPNP
+config PATA_ICSIDE
+ tristate "Acorn ICS PATA support"
+ depends on ARM && ARCH_ACORN
help
- This option enables support for ISA plug & play ATA
- controllers such as those found on old soundcards.
+ On Acorn systems, say Y here if you wish to use the ICS PATA
+ interface card. This is not required for ICS partition support.
+ If you are unsure, say N to this.
+
+config PATA_IT8213
+ tristate "IT8213 PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the ITE 821 PATA
+ controllers via the new ATA layer.
If unsure, say N.
@@ -434,15 +453,6 @@
If unsure, say N.
-config PATA_IT8213
- tristate "IT8213 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
- help
- This option enables support for the ITE 821 PATA
- controllers via the new ATA layer.
-
- If unsure, say N.
-
config PATA_JMICRON
tristate "JMicron PATA support"
depends on PCI
@@ -452,23 +462,14 @@
If unsure, say N.
-config PATA_LEGACY
- tristate "Legacy ISA PATA support (Experimental)"
- depends on (ISA || PCI) && EXPERIMENTAL
+config PATA_MACIO
+ tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
+ depends on PPC_PMAC
help
- This option enables support for ISA/VLB/PCI bus legacy PATA
- ports and allows them to be accessed via the new ATA layer.
-
- If unsure, say N.
-
-config PATA_TRIFLEX
- tristate "Compaq Triflex PATA support"
- depends on PCI
- help
- Enable support for the Compaq 'Triflex' IDE controller as found
- on many Compaq Pentium-Pro systems, via the new ATA layer.
-
- If unsure, say N.
+ Most IDE capable PowerMacs have IDE busses driven by a variant
+ of this controller which is part of the Apple chipset used on
+ most PowerMac models. Some models have multiple busses using
+ different chipsets, though generally, MacIO is one of them.
config PATA_MARVELL
tristate "Marvell PATA support via legacy mode"
@@ -481,32 +482,6 @@
If unsure, say N.
-config PATA_MPC52xx
- tristate "Freescale MPC52xx SoC internal IDE"
- depends on PPC_MPC52xx && PPC_BESTCOMM
- select PPC_BESTCOMM_ATA
- help
- This option enables support for integrated IDE controller
- of the Freescale MPC52xx SoC.
-
- If unsure, say N.
-
-config PATA_MPIIX
- tristate "Intel PATA MPIIX support"
- depends on PCI
- help
- This option enables support for MPIIX PATA support.
-
- If unsure, say N.
-
-config PATA_OLDPIIX
- tristate "Intel PATA old PIIX support"
- depends on PCI
- help
- This option enables support for early PIIX PATA support.
-
- If unsure, say N.
-
config PATA_NETCELL
tristate "NETCELL Revolution RAID support"
depends on PCI
@@ -525,15 +500,6 @@
If unsure, say N.
-config PATA_NS87410
- tristate "Nat Semi NS87410 PATA support"
- depends on PCI
- help
- This option enables support for the National Semiconductor
- NS87410 PCI-IDE controller.
-
- If unsure, say N.
-
config PATA_NS87415
tristate "Nat Semi NS87415 PATA support"
depends on PCI
@@ -543,12 +509,11 @@
If unsure, say N.
-config PATA_OPTI
- tristate "OPTI621/6215 PATA support (Very Experimental)"
- depends on PCI && EXPERIMENTAL
+config PATA_OLDPIIX
+ tristate "Intel PATA old PIIX support"
+ depends on PCI
help
- This option enables full PIO support for the early Opti ATA
- controllers found on some old motherboards.
+ This option enables support for early PIIX PATA support.
If unsure, say N.
@@ -562,24 +527,6 @@
If unsure, say N.
-config PATA_PALMLD
- tristate "Palm LifeDrive PATA support"
- depends on MACH_PALMLD
- help
- This option enables support for Palm LifeDrive's internal ATA
- port via the new ATA layer.
-
- If unsure, say N.
-
-config PATA_PCMCIA
- tristate "PCMCIA PATA support"
- depends on PCMCIA
- help
- This option enables support for PCMCIA ATA interfaces, including
- compact flash card adapters via the new ATA layer.
-
- If unsure, say N.
-
config PATA_PDC2027X
tristate "Promise PATA 2027x support"
depends on PCI
@@ -597,12 +544,6 @@
If unsure, say N.
-config PATA_QDI
- tristate "QDI VLB PATA support"
- depends on ISA
- help
- Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
-
config PATA_RADISYS
tristate "RADISYS 82600 PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
@@ -612,15 +553,6 @@
If unsure, say N.
-config PATA_RB532
- tristate "RouterBoard 532 PATA CompactFlash support"
- depends on MIKROTIK_RB532
- help
- This option enables support for the RouterBoard 532
- PATA CompactFlash controller.
-
- If unsure, say N.
-
config PATA_RDC
tristate "RDC PATA support"
depends on PCI
@@ -631,15 +563,6 @@
If unsure, say N.
-config PATA_RZ1000
- tristate "PC Tech RZ1000 PATA support"
- depends on PCI
- help
- This option enables basic support for the PC Tech RZ1000/1
- PATA controllers via the new ATA layer
-
- If unsure, say N.
-
config PATA_SC1200
tristate "SC1200 PATA support"
depends on PCI
@@ -649,6 +572,24 @@
If unsure, say N.
+config PATA_SCC
+ tristate "Toshiba's Cell Reference Set IDE support"
+ depends on PCI && PPC_CELLEB
+ help
+ This option enables support for the built-in IDE controller on
+ Toshiba Cell Reference Board.
+
+ If unsure, say N.
+
+config PATA_SCH
+ tristate "Intel SCH PATA support"
+ depends on PCI
+ help
+ This option enables support for Intel SCH PATA on the Intel
+ SCH (US15W, US15L, UL11L) series host controllers.
+
+ If unsure, say N.
+
config PATA_SERVERWORKS
tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
depends on PCI
@@ -683,6 +624,15 @@
If unsure, say N.
+config PATA_TRIFLEX
+ tristate "Compaq Triflex PATA support"
+ depends on PCI
+ help
+ Enable support for the Compaq 'Triflex' IDE controller as found
+ on many Compaq Pentium-Pro systems, via the new ATA layer.
+
+ If unsure, say N.
+
config PATA_VIA
tristate "VIA PATA support"
depends on PCI
@@ -701,12 +651,99 @@
If unsure, say N.
-config PATA_WINBOND_VLB
- tristate "Winbond W83759A VLB PATA support (Experimental)"
- depends on ISA && EXPERIMENTAL
+endif # ATA_BMDMA
+
+comment "PIO-only SFF controllers"
+
+config PATA_AT32
+ tristate "Atmel AVR32 PATA support (Experimental)"
+ depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
help
- Support for the Winbond W83759A controller on Vesa Local Bus
- systems.
+ This option enables support for the IDE devices on the
+ Atmel AT32AP platform.
+
+ If unsure, say N.
+
+config PATA_AT91
+ tristate "PATA support for AT91SAM9260"
+ depends on ARM && ARCH_AT91
+ help
+ This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
+
+ If unsure, say N.
+
+config PATA_CMD640_PCI
+ tristate "CMD640 PCI PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the CMD640 PCI IDE
+ interface chip. Only the primary channel is currently
+ supported.
+
+ If unsure, say N.
+
+config PATA_ISAPNP
+ tristate "ISA Plug and Play PATA support"
+ depends on ISAPNP
+ help
+ This option enables support for ISA plug & play ATA
+ controllers such as those found on old soundcards.
+
+ If unsure, say N.
+
+config PATA_IXP4XX_CF
+ tristate "IXP4XX Compact Flash support"
+ depends on ARCH_IXP4XX
+ help
+ This option enables support for a Compact Flash connected on
+ the ixp4xx expansion bus. This driver had been written for
+ Loft/Avila boards in mind but can work with others.
+
+ If unsure, say N.
+
+config PATA_MPIIX
+ tristate "Intel PATA MPIIX support"
+ depends on PCI
+ help
+ This option enables support for MPIIX PATA support.
+
+ If unsure, say N.
+
+config PATA_NS87410
+ tristate "Nat Semi NS87410 PATA support"
+ depends on PCI
+ help
+ This option enables support for the National Semiconductor
+ NS87410 PCI-IDE controller.
+
+ If unsure, say N.
+
+config PATA_OPTI
+ tristate "OPTI621/6215 PATA support (Very Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables full PIO support for the early Opti ATA
+ controllers found on some old motherboards.
+
+ If unsure, say N.
+
+config PATA_PALMLD
+ tristate "Palm LifeDrive PATA support"
+ depends on MACH_PALMLD
+ help
+ This option enables support for Palm LifeDrive's internal ATA
+ port via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_PCMCIA
+ tristate "PCMCIA PATA support"
+ depends on PCMCIA
+ help
+ This option enables support for PCMCIA ATA interfaces, including
+ compact flash card adapters via the new ATA layer.
+
+ If unsure, say N.
config HAVE_PATA_PLATFORM
bool
@@ -725,14 +762,6 @@
If unsure, say N.
-config PATA_AT91
- tristate "PATA support for AT91SAM9260"
- depends on ARM && ARCH_AT91
- help
- This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
-
- If unsure, say N.
-
config PATA_OF_PLATFORM
tristate "OpenFirmware platform device PATA support"
depends on PATA_PLATFORM && PPC_OF
@@ -743,69 +772,65 @@
If unsure, say N.
-config PATA_ICSIDE
- tristate "Acorn ICS PATA support"
- depends on ARM && ARCH_ACORN
+config PATA_QDI
+ tristate "QDI VLB PATA support"
+ depends on ISA
help
- On Acorn systems, say Y here if you wish to use the ICS PATA
- interface card. This is not required for ICS partition support.
- If you are unsure, say N to this.
+ Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
-config PATA_IXP4XX_CF
- tristate "IXP4XX Compact Flash support"
- depends on ARCH_IXP4XX
+config PATA_RB532
+ tristate "RouterBoard 532 PATA CompactFlash support"
+ depends on MIKROTIK_RB532
help
- This option enables support for a Compact Flash connected on
- the ixp4xx expansion bus. This driver had been written for
- Loft/Avila boards in mind but can work with others.
+ This option enables support for the RouterBoard 532
+ PATA CompactFlash controller.
If unsure, say N.
-config PATA_OCTEON_CF
- tristate "OCTEON Boot Bus Compact Flash support"
- depends on CPU_CAVIUM_OCTEON
- help
- This option enables a polled compact flash driver for use with
- compact flash cards attached to the OCTEON boot bus.
-
- If unsure, say N.
-
-config PATA_SCC
- tristate "Toshiba's Cell Reference Set IDE support"
- depends on PCI && PPC_CELLEB
- help
- This option enables support for the built-in IDE controller on
- Toshiba Cell Reference Board.
-
- If unsure, say N.
-
-config PATA_SCH
- tristate "Intel SCH PATA support"
+config PATA_RZ1000
+ tristate "PC Tech RZ1000 PATA support"
depends on PCI
help
- This option enables support for Intel SCH PATA on the Intel
- SCH (US15W, US15L, UL11L) series host controllers.
+ This option enables basic support for the PC Tech RZ1000/1
+ PATA controllers via the new ATA layer
If unsure, say N.
-config PATA_BF54X
- tristate "Blackfin 54x ATAPI support"
- depends on BF542 || BF548 || BF549
+config PATA_WINBOND_VLB
+ tristate "Winbond W83759A VLB PATA support (Experimental)"
+ depends on ISA && EXPERIMENTAL
help
- This option enables support for the built-in ATAPI controller on
- Blackfin 54x family chips.
+ Support for the Winbond W83759A controller on Vesa Local Bus
+ systems.
+
+comment "Generic fallback / legacy drivers"
+
+config PATA_ACPI
+ tristate "ACPI firmware driver for PATA"
+ depends on ATA_ACPI && ATA_BMDMA
+ help
+ This option enables an ACPI method driver which drives
+ motherboard PATA controller interfaces through the ACPI
+ firmware in the BIOS. This driver can sometimes handle
+ otherwise unsupported hardware.
+
+config ATA_GENERIC
+ tristate "Generic ATA support"
+ depends on PCI && ATA_BMDMA
+ help
+ This option enables support for generic BIOS configured
+ ATA controllers via the new ATA layer
If unsure, say N.
-config PATA_MACIO
- tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
- depends on PPC_PMAC
+config PATA_LEGACY
+ tristate "Legacy ISA PATA support (Experimental)"
+ depends on (ISA || PCI) && EXPERIMENTAL
help
- Most IDE capable PowerMacs have IDE busses driven by a variant
- of this controller which is part of the Apple chipset used on
- most PowerMac models. Some models have multiple busses using
- different chipsets, though generally, MacIO is one of them.
+ This option enables support for ISA/VLB/PCI bus legacy PATA
+ ports and allows them to be accessed via the new ATA layer.
+ If unsure, say N.
endif # ATA_SFF
endif # ATA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index d0a93c4..7ef89d7 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -1,33 +1,39 @@
obj-$(CONFIG_ATA) += libata.o
+# non-SFF interface
obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o
obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
-obj-$(CONFIG_SATA_SVW) += sata_svw.o
-obj-$(CONFIG_ATA_PIIX) += ata_piix.o
-obj-$(CONFIG_SATA_PROMISE) += sata_promise.o
-obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o
-obj-$(CONFIG_SATA_SIL) += sata_sil.o
+obj-$(CONFIG_SATA_FSL) += sata_fsl.o
+obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
+
+# SFF w/ custom DMA
+obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
+obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
+obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o
+obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o
+obj-$(CONFIG_SATA_SX4) += sata_sx4.o
+
+# SFF SATA w/ BMDMA
+obj-$(CONFIG_ATA_PIIX) += ata_piix.o
+obj-$(CONFIG_SATA_MV) += sata_mv.o
+obj-$(CONFIG_SATA_NV) += sata_nv.o
+obj-$(CONFIG_SATA_PROMISE) += sata_promise.o
+obj-$(CONFIG_SATA_SIL) += sata_sil.o
+obj-$(CONFIG_SATA_SIS) += sata_sis.o
+obj-$(CONFIG_SATA_SVW) += sata_svw.o
+obj-$(CONFIG_SATA_ULI) += sata_uli.o
obj-$(CONFIG_SATA_VIA) += sata_via.o
obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o
-obj-$(CONFIG_SATA_SIS) += sata_sis.o
-obj-$(CONFIG_SATA_SX4) += sata_sx4.o
-obj-$(CONFIG_SATA_NV) += sata_nv.o
-obj-$(CONFIG_SATA_ULI) += sata_uli.o
-obj-$(CONFIG_SATA_MV) += sata_mv.o
-obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
-obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
-obj-$(CONFIG_SATA_FSL) += sata_fsl.o
-obj-$(CONFIG_PATA_MACIO) += pata_macio.o
+# SFF PATA w/ BMDMA
obj-$(CONFIG_PATA_ALI) += pata_ali.o
obj-$(CONFIG_PATA_AMD) += pata_amd.o
obj-$(CONFIG_PATA_ARTOP) += pata_artop.o
-obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o
-obj-$(CONFIG_PATA_AT32) += pata_at32.o
obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o
-obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o
+obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o
+obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o
obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o
obj-$(CONFIG_PATA_CS5530) += pata_cs5530.o
@@ -39,47 +45,50 @@
obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o
obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o
obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o
-obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
-obj-$(CONFIG_PATA_IT821X) += pata_it821x.o
+obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
obj-$(CONFIG_PATA_IT8213) += pata_it8213.o
+obj-$(CONFIG_PATA_IT821X) += pata_it821x.o
obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o
+obj-$(CONFIG_PATA_MACIO) += pata_macio.o
+obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o
obj-$(CONFIG_PATA_NINJA32) += pata_ninja32.o
-obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o
obj-$(CONFIG_PATA_NS87415) += pata_ns87415.o
-obj-$(CONFIG_PATA_OPTI) += pata_opti.o
-obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o
-obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
-obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
-obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o
-obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o
-obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o
+obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o
obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o
obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o
-obj-$(CONFIG_PATA_QDI) += pata_qdi.o
obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o
-obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
obj-$(CONFIG_PATA_RDC) += pata_rdc.o
-obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o
-obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o
-obj-$(CONFIG_PATA_SIL680) += pata_sil680.o
-obj-$(CONFIG_PATA_TOSHIBA) += pata_piccolo.o
-obj-$(CONFIG_PATA_VIA) += pata_via.o
-obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o
-obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
-obj-$(CONFIG_PATA_SIS) += pata_sis.o
-obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o
-obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
obj-$(CONFIG_PATA_SCC) += pata_scc.o
obj-$(CONFIG_PATA_SCH) += pata_sch.o
-obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
-obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o
+obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o
+obj-$(CONFIG_PATA_SIL680) += pata_sil680.o
+obj-$(CONFIG_PATA_SIS) += pata_sis.o
+obj-$(CONFIG_PATA_TOSHIBA) += pata_piccolo.o
+obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o
+obj-$(CONFIG_PATA_VIA) += pata_via.o
+obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o
+
+# SFF PIO only
+obj-$(CONFIG_PATA_AT32) += pata_at32.o
+obj-$(CONFIG_PATA_AT91) += pata_at91.o
+obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o
+obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
+obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
+obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
+obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o
+obj-$(CONFIG_PATA_OPTI) += pata_opti.o
+obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o
+obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
-obj-$(CONFIG_PATA_AT91) += pata_at91.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
-obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
+obj-$(CONFIG_PATA_QDI) += pata_qdi.o
+obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
+obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
+obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
+
# Should be last but two libata driver
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
# Should be last but one libata driver
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index c29f146..efa4a18 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -798,11 +798,15 @@
case ATAPI_PROT_NODATA:
ap->hsm_task_state = HSM_ST_LAST;
break;
+#ifdef CONFIG_ATA_BMDMA
case ATAPI_PROT_DMA:
ap->hsm_task_state = HSM_ST_LAST;
/* initiate bmdma */
ap->ops->bmdma_start(qc);
break;
+#endif /* CONFIG_ATA_BMDMA */
+ default:
+ BUG();
}
}
@@ -2535,6 +2539,12 @@
#endif /* CONFIG_PCI */
+/*
+ * BMDMA support
+ */
+
+#ifdef CONFIG_ATA_BMDMA
+
const struct ata_port_operations ata_bmdma_port_ops = {
.inherits = &ata_sff_port_ops,
@@ -3287,6 +3297,7 @@
EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one);
#endif /* CONFIG_PCI */
+#endif /* CONFIG_ATA_BMDMA */
/**
* ata_sff_port_init - Initialize SFF/BMDMA ATA port