netxen: fix promisc mode, mtu setting
For NX3031, multicast filtering, promisc mode, and max frame size
setting is handled by firmware, driver needs to send request to
enable/disable it.
For old chip revisions / firmware, driver still sets it directly.
Added function pointer to set mtu according to chip revision.
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 07a59dc..93a7b9b 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1172,6 +1172,36 @@
nx_nic_intr_coalesce_data_t irq;
} nx_nic_intr_coalesce_t;
+#define NX_HOST_REQUEST 0x13
+#define NX_NIC_REQUEST 0x14
+
+#define NX_MAC_EVENT 0x1
+
+enum {
+ NX_NIC_H2C_OPCODE_START = 0,
+ NX_NIC_H2C_OPCODE_CONFIG_RSS,
+ NX_NIC_H2C_OPCODE_CONFIG_RSS_TBL,
+ NX_NIC_H2C_OPCODE_CONFIG_INTR_COALESCE,
+ NX_NIC_H2C_OPCODE_CONFIG_LED,
+ NX_NIC_H2C_OPCODE_CONFIG_PROMISCUOUS,
+ NX_NIC_H2C_OPCODE_CONFIG_L2_MAC,
+ NX_NIC_H2C_OPCODE_LRO_REQUEST,
+ NX_NIC_H2C_OPCODE_GET_SNMP_STATS,
+ NX_NIC_H2C_OPCODE_PROXY_START_REQUEST,
+ NX_NIC_H2C_OPCODE_PROXY_STOP_REQUEST,
+ NX_NIC_H2C_OPCODE_PROXY_SET_MTU,
+ NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE,
+ NX_H2P_OPCODE_GET_FINGER_PRINT_REQUEST,
+ NX_H2P_OPCODE_INSTALL_LICENSE_REQUEST,
+ NX_H2P_OPCODE_GET_LICENSE_CAPABILITY_REQUEST,
+ NX_NIC_H2C_OPCODE_GET_NET_STATS,
+ NX_NIC_H2C_OPCODE_LAST
+};
+
+#define VPORT_MISS_MODE_DROP 0 /* drop all unmatched */
+#define VPORT_MISS_MODE_ACCEPT_ALL 1 /* accept all packets */
+#define VPORT_MISS_MODE_ACCEPT_MULTI 2 /* accept unmatched multicast */
+
typedef struct {
u64 qhdr;
u64 req_hdr;
@@ -1290,7 +1320,7 @@
int (*disable_phy_interrupts) (struct netxen_adapter *);
int (*macaddr_set) (struct netxen_adapter *, netxen_ethernet_macaddr_t);
int (*set_mtu) (struct netxen_adapter *, int);
- int (*set_promisc) (struct netxen_adapter *, netxen_niu_prom_mode_t);
+ int (*set_promisc) (struct netxen_adapter *, u32);
int (*phy_read) (struct netxen_adapter *, long reg, u32 *);
int (*phy_write) (struct netxen_adapter *, long reg, u32 val);
int (*init_port) (struct netxen_adapter *, int);
@@ -1467,9 +1497,10 @@
u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);
void netxen_p2_nic_set_multi(struct net_device *netdev);
void netxen_p3_nic_set_multi(struct net_device *netdev);
+int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32);
int netxen_config_intr_coalesce(struct netxen_adapter *adapter);
-u32 nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu);
+int nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu);
int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
int netxen_nic_set_mac(struct net_device *netdev, void *p);