| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/iio/qcom,spmi-vadc.h> |
| #include <dt-bindings/input/input.h> |
| #include "bengal-audio-overlay.dtsi" |
| #include "camera/khaje-camera-sensor-idp.dtsi" |
| #include "bengal-thermal-overlay.dtsi" |
| #include "khaje-sde-display.dtsi" |
| |
| &qupv3_se4_2uart { |
| status = "ok"; |
| }; |
| |
| &pm6125_vadc { |
| pinctrl-0 = <&camera_therm_default &emmc_therm_default &rf_pa1_therm_default>; |
| |
| rf_pa1_therm { |
| reg = <ADC_GPIO4_PU2>; |
| label = "rf_pa1_therm"; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| }; |
| }; |
| |
| &pm6125_adc_tm { |
| io-channels = <&pm6125_vadc ADC_AMUX_THM1_PU2>, |
| <&pm6125_vadc ADC_AMUX_THM2_PU2>, |
| <&pm6125_vadc ADC_XO_THERM_PU2>, |
| <&pm6125_vadc ADC_GPIO4_PU2>; |
| |
| rf_pa1_therm { |
| reg = <ADC_GPIO4_PU2>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| }; |
| }; |
| |
| &thermal_zones { |
| rf-pa1-therm-usr { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "user_space"; |
| thermal-sensors = <&pm6125_adc_tm ADC_GPIO4_PU2>; |
| wake-capable-sensor; |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| }; |
| |
| &pm6125_gpios { |
| |
| rf_pa1_therm { |
| rf_pa1_therm_default: rf_pa1_therm_default { |
| pins = "gpio7"; |
| bias-high-impedance; |
| }; |
| }; |
| |
| key_vol_up { |
| key_vol_up_default: key_vol_up_default { |
| pins = "gpio5"; |
| function = "normal"; |
| input-enable; |
| bias-pull-up; |
| power-source = <0>; |
| }; |
| }; |
| |
| eldo9_pin { |
| usb_eldo9:gpio@c000 { |
| pins = "gpio1"; |
| function = "normal"; |
| qcom,drive-strength = <2>; |
| power-source = <0>; |
| bias-disable; |
| output-high; |
| }; |
| }; |
| }; |
| |
| &soc { |
| gpio_keys { |
| compatible = "gpio-keys"; |
| label = "gpio-keys"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&key_vol_up_default>; |
| |
| vol_up { |
| label = "volume_up"; |
| gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; |
| linux,input-type = <1>; |
| linux,code = <KEY_VOLUMEUP>; |
| linux,can-disable; |
| debounce-interval = <15>; |
| gpio-key,wakeup; |
| }; |
| }; |
| |
| vdda_usb_ss_dp_core: vdda_usb_ss_dp_core { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd_supply"; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <880000>; |
| enable-active-high; |
| gpio = <&pm6125_gpios 1 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb_eldo9>; |
| }; |
| }; |
| |
| &usb_qmp_dp_phy { |
| vdd-supply = <&vdda_usb_ss_dp_core>; |
| }; |
| |
| &qupv3_se1_i2c { |
| awinic@64 { |
| compatible = "awinic,aw2016_led"; |
| reg = <0x64>; |
| |
| awinic,red { |
| awinic,name = "red"; |
| awinic,id = <0>; |
| awinic,imax = <2>; |
| awinic,led-current = <3>; |
| awinic,max-brightness = <255>; |
| awinic,rise-time-ms = <6>; |
| awinic,hold-time-ms = <0>; |
| awinic,fall-time-ms = <6>; |
| awinic,off-time-ms = <4>; |
| }; |
| |
| awinic,green { |
| awinic,name = "green"; |
| awinic,id = <1>; |
| awinic,imax = <2>; |
| awinic,led-current = <3>; |
| awinic,max-brightness = <255>; |
| awinic,rise-time-ms = <6>; |
| awinic,hold-time-ms = <0>; |
| awinic,fall-time-ms = <6>; |
| awinic,off-time-ms = <4>; |
| }; |
| |
| awinic,blue { |
| awinic,name = "blue"; |
| awinic,id = <2>; |
| awinic,imax = <2>; |
| awinic,led-current = <3>; |
| awinic,max-brightness = <255>; |
| awinic,rise-time-ms = <6>; |
| awinic,hold-time-ms = <0>; |
| awinic,fall-time-ms = <6>; |
| awinic,off-time-ms = <4>; |
| }; |
| |
| }; |
| }; |
| |
| &qupv3_se1_i2c { |
| status = "ok"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| nq@28 { |
| compatible = "qcom,nq-nci"; |
| reg = <0x28>; |
| qcom,nq-irq = <&tlmm 70 0x00>; |
| qcom,nq-ven = <&tlmm 69 0x00>; |
| qcom,nq-firm = <&tlmm 31 0x00>; |
| qcom,nq-clkreq = <&tlmm 71 0x00>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <70 0>; |
| interrupt-names = "nfc_irq"; |
| pinctrl-names = "nfc_active", "nfc_suspend"; |
| pinctrl-0 = <&nfc_int_active &nfc_enable_active |
| &nfc_clk_req_active>; |
| pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend |
| &nfc_clk_req_suspend>; |
| }; |
| }; |
| |
| &sdhc_1 { |
| vdd-supply = <&L24A>; |
| qcom,vdd-voltage-level = <2960000 2960000>; |
| qcom,vdd-current-level = <0 570000>; |
| |
| vdd-io-supply = <&L11A>; |
| qcom,vdd-io-always-on; |
| qcom,vdd-io-lpm-sup; |
| qcom,vdd-io-voltage-level = <1800000 1800000>; |
| qcom,vdd-io-current-level = <0 325000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on |
| &sdc1_rclk_on>; |
| pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off |
| &sdc1_rclk_off>; |
| |
| status = "ok"; |
| }; |
| |
| &sdhc_2 { |
| vdd-supply = <&L22A>; |
| qcom,vdd-voltage-level = <2960000 2960000>; |
| qcom,vdd-current-level = <0 800000>; |
| |
| vdd-io-supply = <&L5A>; |
| qcom,vdd-io-voltage-level = <1800000 2960000>; |
| qcom,vdd-io-current-level = <0 22000>; |
| |
| vdd-io-bias-supply = <&L7A>; |
| qcom,vdd-io-bias-voltage-level = <1256000 1256000>; |
| qcom,vdd-io-bias-current-level = <0 6000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; |
| pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; |
| |
| cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; |
| |
| status = "ok"; |
| }; |
| |
| &ufsphy_mem { |
| compatible = "qcom,ufs-phy-qmp-v4"; |
| |
| vdda-phy-supply = <&L4A>; /* 0.9v */ |
| vdda-pll-supply = <&L18A>; /* 1.8v */ |
| vdda-phy-max-microamp = <85700>; |
| vdda-pll-max-microamp = <18300>; |
| |
| status = "ok"; |
| }; |
| |
| &ufshc_mem { |
| vdd-hba-supply = <&gcc_ufs_phy_gdsc>; |
| vdd-hba-fixed-regulator; |
| vcc-supply = <&L24A>; |
| vcc-voltage-level = <2950000 2960000>; |
| vccq2-supply = <&L11A>; |
| vccq2-voltage-level = <1800000 1800000>; |
| vcc-max-microamp = <800000>; |
| vccq2-max-microamp = <800000>; |
| vccq2-pwr-collapse-sup; |
| |
| qcom,vddp-ref-clk-supply = <&L18A>; |
| qcom,vddp-ref-clk-max-microamp = <100>; |
| qcom,vddp-ref-clk-min-uV = <1232000>; |
| qcom,vddp-ref-clk-max-uV = <1232000>; |
| |
| status = "ok"; |
| }; |
| |
| &pm6125_pwm { |
| status = "ok"; |
| }; |
| |
| &dsi_td4330_truly_v2_video { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm"; |
| pwms = <&pm6125_pwm 0 0>; |
| qcom,bl-pmic-pwm-period-usecs = <100>; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,platform-reset-gpio = <&tlmm 82 0>; |
| }; |
| |
| &dsi_td4330_truly_v2_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm"; |
| pwms = <&pm6125_pwm 0 0>; |
| qcom,bl-pmic-pwm-period-usecs = <100>; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,platform-te-gpio = <&tlmm 81 0>; |
| qcom,platform-reset-gpio = <&tlmm 82 0>; |
| }; |
| |
| &dsi_nt36672e_fhd_plus_90hz_video { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm"; |
| pwms = <&pm6125_pwm 0 0>; |
| qcom,bl-pmic-pwm-period-usecs = <100>; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,platform-reset-gpio = <&tlmm 82 0>; |
| }; |
| |
| &dsi_nt36672e_fhd_plus_120hz_video { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm"; |
| pwms = <&pm6125_pwm 0 0>; |
| qcom,bl-pmic-pwm-period-usecs = <100>; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,platform-reset-gpio = <&tlmm 82 0>; |
| }; |
| |
| &dsi_sim_vid { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; |
| qcom,platform-reset-gpio = <&tlmm 82 0>; |
| }; |
| |
| &sde_dsi { |
| qcom,dsi-default-panel = <&dsi_td4330_truly_v2_video>; |
| }; |
| |
| &qupv3_se2_i2c { |
| status = "okay"; |
| qcom,i2c-touch-active="synaptics,tcm-i2c"; |
| |
| synaptics_tcm@20 { |
| compatible = "synaptics,tcm-i2c"; |
| reg = <0x20>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <80 0x2008>; |
| pinctrl-names = "pmx_ts_active","pmx_ts_suspend", |
| "pmx_ts_release"; |
| pinctrl-0 = <&ts_int_active &ts_reset_active>; |
| pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; |
| pinctrl-2 = <&ts_release>; |
| synaptics,irq-gpio = <&tlmm 80 0x2008>; |
| synaptics,irq-on-state = <0>; |
| synaptics,reset-gpio = <&tlmm 86 0x00>; |
| synaptics,reset-on-state = <0>; |
| synaptics,reset-active-ms = <20>; |
| synaptics,reset-delay-ms = <200>; |
| synaptics,power-delay-ms = <200>; |
| synaptics,ubl-i2c-addr = <0x20>; |
| synaptics,extend_report; |
| synaptics,firmware-name = "synaptics_firmware_k.img"; |
| |
| panel = <&dsi_td4330_truly_v2_video &dsi_td4330_truly_v2_cmd>; |
| }; |
| |
| novatek@62 { |
| compatible = "novatek,NVT-ts"; |
| reg = <0x62>; |
| status = "ok"; |
| |
| interrupt-parent = <&tlmm>; |
| interrupts = <80 0x2008>; |
| pinctrl-names = "pmx_ts_active","pmx_ts_suspend", |
| "pmx_ts_release"; |
| pinctrl-0 = <&ts_int_active &ts_reset_active>; |
| pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; |
| pinctrl-2 = <&ts_release>; |
| |
| novatek,reset-gpio = <&tlmm 86 0x00>; |
| novatek,irq-gpio = <&tlmm 80 0x2008>; |
| |
| panel = <&dsi_nt36672e_fhd_plus_90hz_video |
| &dsi_nt36672e_fhd_plus_120hz_video>; |
| }; |
| |
| }; |