| #include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h> |
| |
| &apps_rsc { |
| /* PM8150 S1 + S9 + s10 = VDD_CX supply */ |
| rpmh-regulator-cxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "cx.lvl"; |
| VDD_CX_LEVEL: S1A_LEVEL: |
| pm8150_s1_level: regulator-pm8150-s1-level { |
| regulator-name = "pm8150_s1_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| qcom,min-dropout-voltage-level = <(-1)>; |
| }; |
| |
| VDD_CX_LEVEL_AO: S1A_LEVEL_AO: |
| pm8150_s1_level_ao: regulator-pm8150-s1-level-ao { |
| regulator-name = "pm8150_s1_level_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| qcom,min-dropout-voltage-level = <(-1)>; |
| }; |
| }; |
| |
| rpmh-regulator-smpa4 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpa4"; |
| qcom,regulator-type = "pmic5-hfsmps"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_RET |
| RPMH_REGULATOR_MODE_AUTO>; |
| qcom,mode-threshold-currents = <0 1>; |
| S4A: pm8150_s4: regulator-pm8150-s4 { |
| regulator-name = "pm8150_s4"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpa5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpa5"; |
| S5A: pm8150_s5: regulator-pm8150-s5 { |
| regulator-name = "pm8150_s5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1664000>; |
| regulator-max-microvolt = <2040000>; |
| qcom,init-voltage = <1664000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpa6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpa6"; |
| S6A: pm8150_s6: regulator-pm8150-s6 { |
| regulator-name = "pm8150_s6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <408000>; |
| regulator-max-microvolt = <1128000>; |
| qcom,init-voltage = <408000>; |
| }; |
| }; |
| |
| /* PM8150 S8 + S7 = VDD_MODEM supply */ |
| rpmh-regulator-msslvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "mss.lvl"; |
| VDD_MSS_LEVEL: S8A_LEVEL: |
| pm8150_s8_level: regulator-pm8150-s8 { |
| regulator-name = "pm8150_s8_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa1"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L1A: pm8150_l1: regulator-pm8150-l1 { |
| regulator-name = "pm8150_l1"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <352000>; |
| regulator-max-microvolt = <952000>; |
| qcom,init-voltage = <352000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa2"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L2A: pm8150_l2: regulator-pm8150-l2 { |
| regulator-name = "pm8150_l2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3300000>; |
| qcom,init-voltage = <2700000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa3 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa3"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L3A: pm8150_l3: regulator-pm8150-l3 { |
| regulator-name = "pm8150_l3"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <312000>; |
| regulator-max-microvolt = <824000>; |
| qcom,init-voltage = <312000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| /* PM8150 L4 = VDD_LPI_MX supply */ |
| rpmh-regulator-lmxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "lmx.lvl"; |
| L4A_LEVEL: pm8150_l4_level: regulator-pm8150-l4-level { |
| regulator-name = "pm8150_l4_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa5"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| proxy-supply = <&pm8150_l5>; |
| L5A: pm8150_l5: regulator-pm8150-l5 { |
| regulator-name = "pm8150_l5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <720000>; |
| regulator-max-microvolt = <1056000>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <23800>; |
| qcom,init-voltage = <720000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| L5A_AO: pm8150_l5_ao: regulator-pm8150-l5-ao { |
| regulator-name = "pm8150_l5_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt = <720000>; |
| regulator-max-microvolt = <1056000>; |
| qcom,init-voltage = <720000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| regulator-pm8150-l5-so { |
| regulator-name = "pm8150_l5_so"; |
| qcom,set = <RPMH_REGULATOR_SET_SLEEP>; |
| regulator-min-microvolt = <720000>; |
| regulator-max-microvolt = <1056000>; |
| qcom,init-voltage = <720000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| qcom,init-enable = <0>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa6"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L6A: pm8150_l6: regulator-pm8150-l6 { |
| regulator-name = "pm8150_l6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1096000>; |
| regulator-max-microvolt = <1248000>; |
| qcom,init-voltage = <1096000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa7"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L7A: pm8150_l7: regulator-pm8150-l7 { |
| regulator-name = "pm8150_l7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1648000>; |
| regulator-max-microvolt = <1904000>; |
| qcom,init-voltage = <1648000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa8 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa8"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L8A: pm8150_l8: regulator-pm8150-l8 { |
| regulator-name = "pm8150_l8"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <720000>; |
| regulator-max-microvolt = <824000>; |
| qcom,init-voltage = <720000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa9 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa9"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| proxy-supply = <&pm8150_l9>; |
| L9A: pm8150_l9: regulator-pm8150-l9 { |
| regulator-name = "pm8150_l9"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1152000>; |
| regulator-max-microvolt = <1320000>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <51800>; |
| qcom,init-voltage = <1152000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa10 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa10"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L10A: pm8150_l10: regulator-pm8150-l10 { |
| regulator-name = "pm8150_l10"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3304000>; |
| qcom,init-voltage = <3000000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa11 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa11"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L11A: pm8150_l11: regulator-pm8150-l11 { |
| regulator-name = "pm8150_l11"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <696000>; |
| regulator-max-microvolt = <880000>; |
| qcom,init-voltage = <696000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa12 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa12"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L12A: pm8150_l12: regulator-pm8150-l12 { |
| regulator-name = "pm8150_l12"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1710000>; |
| regulator-max-microvolt = <1890000>; |
| qcom,init-voltage = <1710000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| L12A_AO: pm8150_l12_ao: regulator-pm8150-l12-ao { |
| regulator-name = "pm8150_l12_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt = <1710000>; |
| regulator-max-microvolt = <1890000>; |
| qcom,init-voltage = <1710000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| L12A_SO: pm8150_l12_so: regulator-pm8150-l12-so { |
| regulator-name = "pm8150_l12_so"; |
| qcom,set = <RPMH_REGULATOR_SET_SLEEP>; |
| regulator-min-microvolt = <1710000>; |
| regulator-max-microvolt = <1890000>; |
| qcom,init-voltage = <1710000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| qcom,init-enable = <0>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa13 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa13"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L13A: pm8150_l13: regulator-pm8150-l13 { |
| regulator-name = "pm8150_l13"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <3304000>; |
| qcom,init-voltage = <3008000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa14 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa14"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L14A: pm8150_l14: regulator-pm8150-l14 { |
| regulator-name = "pm8150_l14"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1616000>; |
| regulator-max-microvolt = <1984000>; |
| qcom,init-voltage = <1616000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa15 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa15"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L15A: pm8150_l15: regulator-pm8150-l15 { |
| regulator-name = "pm8150_l15"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1600000>; |
| regulator-max-microvolt = <1900000>; |
| qcom,init-voltage = <1600000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa16 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa16"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| proxy-supply = <&pm8150_l16>; |
| L16A: pm8150_l16: regulator-pm8150-l16 { |
| regulator-name = "pm8150_l16"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2600000>; |
| regulator-max-microvolt = <3304000>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <857000>; |
| qcom,init-voltage = <2600000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa17 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa17"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L17A: pm8150_l17: regulator-pm8150-l17 { |
| regulator-name = "pm8150_l17"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| /* PM8150 L18 = VDD_LPI_CX supply */ |
| rpmh-regulator-lcxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "lcx.lvl"; |
| L18A_LEVEL: pm8150_l18_level: regulator-pm8150-l18-level { |
| regulator-name = "pm8150_l18_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| lpi_cx_cdev: regulator-cdev { |
| compatible = "qcom,rpmh-reg-cdev"; |
| mboxes = <&qmp_aop 0>; |
| qcom,reg-resource-name = "cx"; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| rpmh-regulator-smpc2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpc2"; |
| S2C: pm8150a_s2: regulator-pm8150a-s2 { |
| regulator-name = "pm8150a_s2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <800000>; |
| qcom,init-voltage = <600000>; |
| }; |
| }; |
| |
| /* PM8150A S3 = VDD_EBI supply */ |
| rpmh-regulator-ebilvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "ebi.lvl"; |
| S3C_LEVEL: pm8150a_s3_level: regulator-pm8150a-s3 { |
| regulator-name = "pm8150a_s3_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| /* PM8150A S4 + S5 = VDD_MX supply */ |
| rpmh-regulator-mxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "mx.lvl"; |
| VDD_MX_LEVEL: S4C_LEVEL: |
| pm8150a_s4_level: regulator-pm8150a-s4-level { |
| regulator-name = "pm8150a_s4_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| VDD_MX_LEVEL_AO: S4C_LEVEL_AO: |
| pm8150a_s4_level_ao: regulator-pm8150a-s4-level-ao { |
| regulator-name = "pm8150a_s4_level_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| /* PM8150A S6 = VDD_GX supply */ |
| rpmh-regulator-gfxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "gfx.lvl"; |
| VDD_GFX_LEVEL: S6C_LEVEL: |
| pm8150a_s6_level: regulator-pm8150a-s6-level { |
| regulator-name = "pm8150a_s6_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| rpmh-regulator-smpc7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpc7"; |
| S7C: pm8150a_s7: regulator-pm8150a-s7 { |
| regulator-name = "pm8150a_s7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1128000>; |
| regulator-max-microvolt = <1128000>; |
| qcom,init-voltage = <1128000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpc8 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpc8"; |
| S8C: pm8150a_s8: regulator-pm8150a-s8 { |
| regulator-name = "pm8150a_s8"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <696000>; |
| regulator-max-microvolt = <1416000>; |
| qcom,init-voltage = <696000>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc1"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| proxy-supply = <&pm8150a_l1>; |
| L1C: pm8150a_l1: regulator-pm8150a-l1 { |
| regulator-name = "pm8150a_l1"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1896000>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <62000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc2"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L2C: pm8150a_l2: regulator-pm8150a-l2 { |
| regulator-name = "pm8150a_l2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1144000>; |
| regulator-max-microvolt = <1328000>; |
| qcom,init-voltage = <1144000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc3 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc3"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L3C: pm8150a_l3: regulator-pm8150a-l3 { |
| regulator-name = "pm8150a_l3"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1136000>; |
| regulator-max-microvolt = <1264000>; |
| qcom,init-voltage = <1136000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc4 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc4"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L4C: pm8150a_l4: regulator-pm8150a-l4 { |
| regulator-name = "pm8150a_l4"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1712000>; |
| regulator-max-microvolt = <3304000>; |
| qcom,init-voltage = <1712000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc5"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L5C: pm8150a_l5: regulator-pm8150a-l5 { |
| regulator-name = "pm8150a_l5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1712000>; |
| regulator-max-microvolt = <3304000>; |
| qcom,init-voltage = <1712000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc6"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L6C: pm8150a_l6: regulator-pm8150a-l6 { |
| regulator-name = "pm8150a_l6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2960000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc7"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L7C: pm8150a_l7: regulator-pm8150a-l7 { |
| regulator-name = "pm8150a_l7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2704000>; |
| regulator-max-microvolt = <3304000>; |
| qcom,init-voltage = <2704000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc8 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc8"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L8C: pm8150a_l8: regulator-pm8150a-l8 { |
| regulator-name = "pm8150a_l8"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <1952000>; |
| qcom,init-voltage = <1704000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc9 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc9"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L9C: pm8150a_l9: regulator-pm8150a-l9 { |
| regulator-name = "pm8150a_l9"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2704000>; |
| regulator-max-microvolt = <3304000>; |
| qcom,init-voltage = <2704000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc10 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc10"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L10C: pm8150a_l10: regulator-pm8150a-l10 { |
| regulator-name = "pm8150a_l10"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3312000>; |
| qcom,init-voltage = <3000000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc11 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc11"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L11C: pm8150a_l11: regulator-pm8150a-l11 { |
| regulator-name = "pm8150a_l11"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3312000>; |
| qcom,init-voltage = <3000000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-bobc1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "bobc1"; |
| qcom,regulator-type = "pmic5-bob"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_PASS |
| RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1000000 2000000>; |
| qcom,send-defaults; |
| |
| BOB: pm8150a_bob: regulator-pm8150a-bob { |
| regulator-name = "pm8150a_bob"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <3960000>; |
| qcom,init-voltage = <3008000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_PASS>; |
| }; |
| |
| BOB_AO: pm8150a_bob_ao: regulator-pm8150a-bob-ao { |
| regulator-name = "pm8150a_bob_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <3960000>; |
| qcom,init-voltage = <3008000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_AUTO>; |
| }; |
| }; |
| }; |
| |
| &soc { |
| refgen: refgen-regulator@ff1000 { |
| compatible = "qcom,refgen-kona-regulator"; |
| reg = <0xff1000 0x84>; |
| regulator-name = "refgen"; |
| regulator-enable-ramp-delay = <5>; |
| proxy-supply = <&refgen>; |
| qcom,proxy-consumer-enable; |
| }; |
| }; |