x86: unify interrupt vector defines
The interrupt vector defines are copied 4 times around with minimal
differences. Move them all into asm-x86/irq_vectors.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 2a609dc..0c7f64b 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -51,7 +51,7 @@
#include <asm/percpu.h>
#include <asm/dwarf2.h>
#include <asm/processor-flags.h>
-#include "irq_vectors.h"
+#include <asm/irq_vectors.h>
/*
* We use macros for low-level operations which need to be overridden
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index a2b0307..ba7d19e 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -33,8 +33,7 @@
#include <asm/apic.h>
#include <asm/timer.h>
#include <asm/i8253.h>
-
-#include <irq_vectors.h>
+#include <asm/irq_vectors.h>
#define VMI_ONESHOT (VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL | vmi_get_alarm_wiring())
#define VMI_PERIODIC (VMI_ALARM_IS_PERIODIC | VMI_CYCLES_REAL | vmi_get_alarm_wiring())
diff --git a/arch/x86/mach-visws/visws_apic.c b/arch/x86/mach-visws/visws_apic.c
index cef9cb1..d8b2cfd 100644
--- a/arch/x86/mach-visws/visws_apic.c
+++ b/arch/x86/mach-visws/visws_apic.c
@@ -21,10 +21,9 @@
#include <asm/io.h>
#include <asm/apic.h>
#include <asm/i8259.h>
+#include <asm/irq_vectors.h>
#include "cobalt.h"
-#include "irq_vectors.h"
-
static DEFINE_SPINLOCK(cobalt_lock);
diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h
index 38af08e..a8c5e8b 100644
--- a/include/asm-x86/hw_irq.h
+++ b/include/asm-x86/hw_irq.h
@@ -13,7 +13,7 @@
* unified by tglx
*/
-#define NMI_VECTOR 0x02
+#include <asm/irq_vectors.h>
#ifndef __ASSEMBLY__
@@ -75,6 +75,16 @@
extern atomic_t irq_err_count;
extern atomic_t irq_mis_count;
+/* Voyager functions */
+extern asmlinkage void vic_cpi_interrupt(void);
+extern asmlinkage void vic_sys_interrupt(void);
+extern asmlinkage void vic_cmn_interrupt(void);
+extern asmlinkage void qic_timer_interrupt(void);
+extern asmlinkage void qic_invalidate_interrupt(void);
+extern asmlinkage void qic_reschedule_interrupt(void);
+extern asmlinkage void qic_enable_irq_interrupt(void);
+extern asmlinkage void qic_call_function_interrupt(void);
+
#endif /* !ASSEMBLY_ */
#ifdef CONFIG_X86_32
diff --git a/include/asm-x86/hw_irq_64.h b/include/asm-x86/hw_irq_64.h
index 2867457..98c9d49 100644
--- a/include/asm-x86/hw_irq_64.h
+++ b/include/asm-x86/hw_irq_64.h
@@ -1,74 +1,3 @@
-/*
- * IDT vectors usable for external interrupt sources start
- * at 0x20:
- */
-#define FIRST_EXTERNAL_VECTOR 0x20
-
-#define IA32_SYSCALL_VECTOR 0x80
-
-
-/* Reserve the lowest usable priority level 0x20 - 0x2f for triggering
- * cleanup after irq migration.
- */
-#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR
-
-/*
- * Vectors 0x30-0x3f are used for ISA interrupts.
- */
-#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10)
-#define IRQ1_VECTOR (IRQ0_VECTOR + 1)
-#define IRQ2_VECTOR (IRQ0_VECTOR + 2)
-#define IRQ3_VECTOR (IRQ0_VECTOR + 3)
-#define IRQ4_VECTOR (IRQ0_VECTOR + 4)
-#define IRQ5_VECTOR (IRQ0_VECTOR + 5)
-#define IRQ6_VECTOR (IRQ0_VECTOR + 6)
-#define IRQ7_VECTOR (IRQ0_VECTOR + 7)
-#define IRQ8_VECTOR (IRQ0_VECTOR + 8)
-#define IRQ9_VECTOR (IRQ0_VECTOR + 9)
-#define IRQ10_VECTOR (IRQ0_VECTOR + 10)
-#define IRQ11_VECTOR (IRQ0_VECTOR + 11)
-#define IRQ12_VECTOR (IRQ0_VECTOR + 12)
-#define IRQ13_VECTOR (IRQ0_VECTOR + 13)
-#define IRQ14_VECTOR (IRQ0_VECTOR + 14)
-#define IRQ15_VECTOR (IRQ0_VECTOR + 15)
-
-/*
- * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
- *
- * some of the following vectors are 'rare', they are merged
- * into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
- * TLB, reschedule and local APIC vectors are performance-critical.
- */
-#define SPURIOUS_APIC_VECTOR 0xff
-#define ERROR_APIC_VECTOR 0xfe
-#define RESCHEDULE_VECTOR 0xfd
-#define CALL_FUNCTION_VECTOR 0xfc
-/* fb free - please don't readd KDB here because it's useless
- (hint - think what a NMI bit does to a vector) */
-#define THERMAL_APIC_VECTOR 0xfa
-#define THRESHOLD_APIC_VECTOR 0xf9
-/* f8 free */
-#define INVALIDATE_TLB_VECTOR_END 0xf7
-#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */
-
-#define NUM_INVALIDATE_TLB_VECTORS 8
-
-/*
- * Local APIC timer IRQ vector is on a different priority level,
- * to work around the 'lost local interrupt if more than 2 IRQ
- * sources per level' errata.
- */
-#define LOCAL_TIMER_VECTOR 0xef
-
-/*
- * First APIC vector available to drivers: (vectors 0x30-0xee)
- * we start at 0x41 to spread out vectors evenly between priority
- * levels. (0x80 is the syscall vector)
- */
-#define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2)
-#define FIRST_SYSTEM_VECTOR 0xef /* duplicated in irq.h */
-
-
#ifndef __ASSEMBLY__
typedef int vector_irq_t[NR_VECTORS];
diff --git a/include/asm-x86/irq_32.h b/include/asm-x86/irq_32.h
index 0b79f31..c5c7542 100644
--- a/include/asm-x86/irq_32.h
+++ b/include/asm-x86/irq_32.h
@@ -12,7 +12,7 @@
#include <linux/sched.h>
/* include comes from machine specific directory */
-#include "irq_vectors.h"
+#include <asm/irq_vectors.h>
#include <asm/thread_info.h>
static inline int irq_canonicalize(int irq)
diff --git a/include/asm-x86/irq_64.h b/include/asm-x86/irq_64.h
index 7608176..3037ec6 100644
--- a/include/asm-x86/irq_64.h
+++ b/include/asm-x86/irq_64.h
@@ -11,34 +11,7 @@
*/
#include <asm/apicdef.h>
-
-#define TIMER_IRQ 0
-
-/*
- * 16 8259A IRQ's, 208 potential APIC interrupt sources.
- * Right now the APIC is mostly only used for SMP.
- * 256 vectors is an architectural limit. (we can have
- * more than 256 devices theoretically, but they will
- * have to use shared interrupts)
- * Since vectors 0x00-0x1f are used/reserved for the CPU,
- * the usable vector space is 0x20-0xff (224 vectors)
- */
-
-/*
- * The maximum number of vectors supported by x86_64 processors
- * is limited to 256. For processors other than x86_64, NR_VECTORS
- * should be changed accordingly.
- */
-#define NR_VECTORS 256
-
-#define FIRST_SYSTEM_VECTOR 0xef /* duplicated in hw_irq.h */
-
-#if NR_CPUS < MAX_IO_APICS
-#define NR_IRQS (NR_VECTORS + (32 * NR_CPUS))
-#else
-#define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS))
-#endif
-#define NR_IRQ_VECTORS NR_IRQS
+#include <asm/irq_vectors.h>
static inline int irq_canonicalize(int irq)
{
diff --git a/include/asm-x86/irq_vectors.h b/include/asm-x86/irq_vectors.h
new file mode 100644
index 0000000..daceaaf
--- /dev/null
+++ b/include/asm-x86/irq_vectors.h
@@ -0,0 +1,168 @@
+#ifndef _ASM_IRQ_VECTORS_H
+#define _ASM_IRQ_VECTORS_H
+
+#include <linux/threads.h>
+
+#define NMI_VECTOR 0x02
+
+/*
+ * IDT vectors usable for external interrupt sources start
+ * at 0x20:
+ */
+#define FIRST_EXTERNAL_VECTOR 0x20
+
+#ifdef CONFIG_X86_32
+# define SYSCALL_VECTOR 0x80
+#else
+# define IA32_SYSCALL_VECTOR 0x80
+#endif
+
+/*
+ * Vectors 0x20-0x2f are used for ISA interrupts on 32 bit.
+ *
+ * Reserve the lowest usable priority level 0x20 - 0x2f for triggering
+ * cleanup after irq migration on 64 bit.
+ */
+#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR
+
+/*
+ * Vectors 0x30-0x3f are used for ISA interrupts on 64 bit
+ */
+#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10)
+#define IRQ1_VECTOR (IRQ0_VECTOR + 1)
+#define IRQ2_VECTOR (IRQ0_VECTOR + 2)
+#define IRQ3_VECTOR (IRQ0_VECTOR + 3)
+#define IRQ4_VECTOR (IRQ0_VECTOR + 4)
+#define IRQ5_VECTOR (IRQ0_VECTOR + 5)
+#define IRQ6_VECTOR (IRQ0_VECTOR + 6)
+#define IRQ7_VECTOR (IRQ0_VECTOR + 7)
+#define IRQ8_VECTOR (IRQ0_VECTOR + 8)
+#define IRQ9_VECTOR (IRQ0_VECTOR + 9)
+#define IRQ10_VECTOR (IRQ0_VECTOR + 10)
+#define IRQ11_VECTOR (IRQ0_VECTOR + 11)
+#define IRQ12_VECTOR (IRQ0_VECTOR + 12)
+#define IRQ13_VECTOR (IRQ0_VECTOR + 13)
+#define IRQ14_VECTOR (IRQ0_VECTOR + 14)
+#define IRQ15_VECTOR (IRQ0_VECTOR + 15)
+
+/*
+ * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
+ *
+ * some of the following vectors are 'rare', they are merged
+ * into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
+ * TLB, reschedule and local APIC vectors are performance-critical.
+ *
+ * Vectors 0xf0-0xfa are free (reserved for future Linux use).
+ */
+#ifdef CONFIG_X86_32
+
+# define SPURIOUS_APIC_VECTOR 0xff
+# define ERROR_APIC_VECTOR 0xfe
+# define INVALIDATE_TLB_VECTOR 0xfd
+# define RESCHEDULE_VECTOR 0xfc
+# define CALL_FUNCTION_VECTOR 0xfb
+# define THERMAL_APIC_VECTOR 0xf0
+
+#else
+
+#define SPURIOUS_APIC_VECTOR 0xff
+#define ERROR_APIC_VECTOR 0xfe
+#define RESCHEDULE_VECTOR 0xfd
+#define CALL_FUNCTION_VECTOR 0xfc
+#define THERMAL_APIC_VECTOR 0xfa
+#define THRESHOLD_APIC_VECTOR 0xf9
+#define INVALIDATE_TLB_VECTOR_END 0xf7
+#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */
+
+#define NUM_INVALIDATE_TLB_VECTORS 8
+
+#endif
+
+/*
+ * Local APIC timer IRQ vector is on a different priority level,
+ * to work around the 'lost local interrupt if more than 2 IRQ
+ * sources per level' errata.
+ */
+#define LOCAL_TIMER_VECTOR 0xef
+
+/*
+ * First APIC vector available to drivers: (vectors 0x30-0xee) we
+ * start at 0x31(0x41) to spread out vectors evenly between priority
+ * levels. (0x80 is the syscall vector)
+ */
+#ifdef CONFIG_X86_32
+# define FIRST_DEVICE_VECTOR 0x31
+#else
+# define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2)
+#endif
+
+#define FIRST_SYSTEM_VECTOR 0xef
+
+#define NR_VECTORS 256
+
+#define FPU_IRQ 13
+
+#define FIRST_VM86_IRQ 3
+#define LAST_VM86_IRQ 15
+#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15)
+
+#if !defined(CONFIG_X86_VISWS) && !defined(CONFIG_X86_VOYAGER)
+
+# if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT)
+
+# define NR_IRQS 224
+
+# if (224 >= 32 * NR_CPUS)
+# define NR_IRQ_VECTORS NR_IRQS
+# else
+# define NR_IRQ_VECTORS (32 * NR_CPUS)
+# endif
+
+# else /* IO_APIC || PARAVIRT */
+
+# define NR_IRQS 16
+# define NR_IRQ_VECTORS NR_IRQS
+
+# endif
+
+#else /* !VISWS && !VOYAGER */
+
+# define NR_IRQS 224
+# define NR_IRQ_VECTORS NR_IRQS
+
+#endif /* VISWS */
+
+/* Voyager specific defines */
+/* These define the CPIs we use in linux */
+#define VIC_CPI_LEVEL0 0
+#define VIC_CPI_LEVEL1 1
+/* now the fake CPIs */
+#define VIC_TIMER_CPI 2
+#define VIC_INVALIDATE_CPI 3
+#define VIC_RESCHEDULE_CPI 4
+#define VIC_ENABLE_IRQ_CPI 5
+#define VIC_CALL_FUNCTION_CPI 6
+
+/* Now the QIC CPIs: Since we don't need the two initial levels,
+ * these are 2 less than the VIC CPIs */
+#define QIC_CPI_OFFSET 1
+#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET)
+#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
+#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
+#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
+#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
+
+#define VIC_START_FAKE_CPI VIC_TIMER_CPI
+#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_CPI
+
+/* this is the SYS_INT CPI. */
+#define VIC_SYS_INT 8
+#define VIC_CMN_INT 15
+
+/* This is the boot CPI for alternate processors. It gets overwritten
+ * by the above once the system has activated all available processors */
+#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0
+#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8)
+
+
+#endif /* _ASM_IRQ_VECTORS_H */
diff --git a/include/asm-x86/mach-default/irq_vectors.h b/include/asm-x86/mach-default/irq_vectors.h
deleted file mode 100644
index 881c63c..0000000
--- a/include/asm-x86/mach-default/irq_vectors.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * This file should contain #defines for all of the interrupt vector
- * numbers used by this architecture.
- *
- * In addition, there are some standard defines:
- *
- * FIRST_EXTERNAL_VECTOR:
- * The first free place for external interrupts
- *
- * SYSCALL_VECTOR:
- * The IRQ vector a syscall makes the user to kernel transition
- * under.
- *
- * TIMER_IRQ:
- * The IRQ number the timer interrupt comes in at.
- *
- * NR_IRQS:
- * The total number of interrupt vectors (including all the
- * architecture specific interrupts) needed.
- *
- */
-#ifndef _ASM_IRQ_VECTORS_H
-#define _ASM_IRQ_VECTORS_H
-
-/*
- * IDT vectors usable for external interrupt sources start
- * at 0x20:
- */
-#define FIRST_EXTERNAL_VECTOR 0x20
-
-#define SYSCALL_VECTOR 0x80
-
-/*
- * Vectors 0x20-0x2f are used for ISA interrupts.
- */
-
-/*
- * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
- *
- * some of the following vectors are 'rare', they are merged
- * into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
- * TLB, reschedule and local APIC vectors are performance-critical.
- *
- * Vectors 0xf0-0xfa are free (reserved for future Linux use).
- */
-#define SPURIOUS_APIC_VECTOR 0xff
-#define ERROR_APIC_VECTOR 0xfe
-#define INVALIDATE_TLB_VECTOR 0xfd
-#define RESCHEDULE_VECTOR 0xfc
-#define CALL_FUNCTION_VECTOR 0xfb
-
-#define THERMAL_APIC_VECTOR 0xf0
-/*
- * Local APIC timer IRQ vector is on a different priority level,
- * to work around the 'lost local interrupt if more than 2 IRQ
- * sources per level' errata.
- */
-#define LOCAL_TIMER_VECTOR 0xef
-
-/*
- * First APIC vector available to drivers: (vectors 0x30-0xee)
- * we start at 0x31 to spread out vectors evenly between priority
- * levels. (0x80 is the syscall vector)
- */
-#define FIRST_DEVICE_VECTOR 0x31
-#define FIRST_SYSTEM_VECTOR 0xef
-
-#define TIMER_IRQ 0
-
-/*
- * 16 8259A IRQ's, 208 potential APIC interrupt sources.
- * Right now the APIC is mostly only used for SMP.
- * 256 vectors is an architectural limit. (we can have
- * more than 256 devices theoretically, but they will
- * have to use shared interrupts)
- * Since vectors 0x00-0x1f are used/reserved for the CPU,
- * the usable vector space is 0x20-0xff (224 vectors)
- */
-
-/*
- * The maximum number of vectors supported by i386 processors
- * is limited to 256. For processors other than i386, NR_VECTORS
- * should be changed accordingly.
- */
-#define NR_VECTORS 256
-
-#include "irq_vectors_limits.h"
-
-#define FPU_IRQ 13
-
-#define FIRST_VM86_IRQ 3
-#define LAST_VM86_IRQ 15
-#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15)
-
-
-#endif /* _ASM_IRQ_VECTORS_H */
diff --git a/include/asm-x86/mach-default/irq_vectors_limits.h b/include/asm-x86/mach-default/irq_vectors_limits.h
deleted file mode 100644
index a90c7a6..0000000
--- a/include/asm-x86/mach-default/irq_vectors_limits.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _ASM_IRQ_VECTORS_LIMITS_H
-#define _ASM_IRQ_VECTORS_LIMITS_H
-
-#if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT)
-#define NR_IRQS 224
-# if (224 >= 32 * NR_CPUS)
-# define NR_IRQ_VECTORS NR_IRQS
-# else
-# define NR_IRQ_VECTORS (32 * NR_CPUS)
-# endif
-#else
-#define NR_IRQS 16
-#define NR_IRQ_VECTORS NR_IRQS
-#endif
-
-#endif /* _ASM_IRQ_VECTORS_LIMITS_H */
diff --git a/include/asm-x86/mach-visws/irq_vectors.h b/include/asm-x86/mach-visws/irq_vectors.h
deleted file mode 100644
index cb572d8..0000000
--- a/include/asm-x86/mach-visws/irq_vectors.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef _ASM_IRQ_VECTORS_H
-#define _ASM_IRQ_VECTORS_H
-
-/*
- * IDT vectors usable for external interrupt sources start
- * at 0x20:
- */
-#define FIRST_EXTERNAL_VECTOR 0x20
-
-#define SYSCALL_VECTOR 0x80
-
-/*
- * Vectors 0x20-0x2f are used for ISA interrupts.
- */
-
-/*
- * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
- *
- * some of the following vectors are 'rare', they are merged
- * into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
- * TLB, reschedule and local APIC vectors are performance-critical.
- *
- * Vectors 0xf0-0xfa are free (reserved for future Linux use).
- */
-#define SPURIOUS_APIC_VECTOR 0xff
-#define ERROR_APIC_VECTOR 0xfe
-#define INVALIDATE_TLB_VECTOR 0xfd
-#define RESCHEDULE_VECTOR 0xfc
-#define CALL_FUNCTION_VECTOR 0xfb
-
-#define THERMAL_APIC_VECTOR 0xf0
-/*
- * Local APIC timer IRQ vector is on a different priority level,
- * to work around the 'lost local interrupt if more than 2 IRQ
- * sources per level' errata.
- */
-#define LOCAL_TIMER_VECTOR 0xef
-
-/*
- * First APIC vector available to drivers: (vectors 0x30-0xee)
- * we start at 0x31 to spread out vectors evenly between priority
- * levels. (0x80 is the syscall vector)
- */
-#define FIRST_DEVICE_VECTOR 0x31
-#define FIRST_SYSTEM_VECTOR 0xef
-
-#define TIMER_IRQ 0
-
-/*
- * IRQ definitions
- */
-#define NR_VECTORS 256
-#define NR_IRQS 224
-#define NR_IRQ_VECTORS NR_IRQS
-
-#define FPU_IRQ 13
-
-#define FIRST_VM86_IRQ 3
-#define LAST_VM86_IRQ 15
-#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15)
-
-#endif /* _ASM_IRQ_VECTORS_H */
diff --git a/include/asm-x86/mach-voyager/irq_vectors.h b/include/asm-x86/mach-voyager/irq_vectors.h
deleted file mode 100644
index 165421f..0000000
--- a/include/asm-x86/mach-voyager/irq_vectors.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Copyright (C) 2002
- *
- * Author: James.Bottomley@HansenPartnership.com
- *
- * linux/arch/i386/voyager/irq_vectors.h
- *
- * This file provides definitions for the VIC and QIC CPIs
- */
-
-#ifndef _ASM_IRQ_VECTORS_H
-#define _ASM_IRQ_VECTORS_H
-
-/*
- * IDT vectors usable for external interrupt sources start
- * at 0x20:
- */
-#define FIRST_EXTERNAL_VECTOR 0x20
-
-#define SYSCALL_VECTOR 0x80
-
-/*
- * Vectors 0x20-0x2f are used for ISA interrupts.
- */
-
-/* These define the CPIs we use in linux */
-#define VIC_CPI_LEVEL0 0
-#define VIC_CPI_LEVEL1 1
-/* now the fake CPIs */
-#define VIC_TIMER_CPI 2
-#define VIC_INVALIDATE_CPI 3
-#define VIC_RESCHEDULE_CPI 4
-#define VIC_ENABLE_IRQ_CPI 5
-#define VIC_CALL_FUNCTION_CPI 6
-
-/* Now the QIC CPIs: Since we don't need the two initial levels,
- * these are 2 less than the VIC CPIs */
-#define QIC_CPI_OFFSET 1
-#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET)
-#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
-#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
-#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
-
-#define VIC_START_FAKE_CPI VIC_TIMER_CPI
-#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_CPI
-
-/* this is the SYS_INT CPI. */
-#define VIC_SYS_INT 8
-#define VIC_CMN_INT 15
-
-/* This is the boot CPI for alternate processors. It gets overwritten
- * by the above once the system has activated all available processors */
-#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0
-#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8)
-
-#define NR_VECTORS 256
-#define NR_IRQS 224
-#define NR_IRQ_VECTORS NR_IRQS
-
-#define FPU_IRQ 13
-
-#define FIRST_VM86_IRQ 3
-#define LAST_VM86_IRQ 15
-#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15)
-
-#ifndef __ASSEMBLY__
-extern asmlinkage void vic_cpi_interrupt(void);
-extern asmlinkage void vic_sys_interrupt(void);
-extern asmlinkage void vic_cmn_interrupt(void);
-extern asmlinkage void qic_timer_interrupt(void);
-extern asmlinkage void qic_invalidate_interrupt(void);
-extern asmlinkage void qic_reschedule_interrupt(void);
-extern asmlinkage void qic_enable_irq_interrupt(void);
-extern asmlinkage void qic_call_function_interrupt(void);
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_IRQ_VECTORS_H */