ARM: imx: Add initial support for IMX27IPCAM board
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 56684b5..c172418 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -300,4 +300,13 @@
Include support for i-MXT (aka td60) platform. This
includes specific configurations for the module and its peripherals.
+config MACH_IMX27IPCAM
+ bool "IMX27 IPCAM platform"
+ select SOC_IMX27
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_UART
+ help
+ Include support for IMX27 IPCAM platform. This includes specific
+ configurations for the board and its peripherals.
+
endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 77100bf..3e49ae0 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -36,3 +36,4 @@
obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
+obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
new file mode 100644
index 0000000..d099ea6
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx27.h>
+
+#include "devices-imx27.h"
+
+static const int mx27ipcam_pins[] __initconst = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+};
+
+static void __init mx27ipcam_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins),
+ "mx27ipcam");
+
+ imx27_add_imx_uart0(NULL);
+ imx27_add_fec(NULL);
+ imx27_add_imx2_wdt(NULL);
+}
+
+static void __init mx27ipcam_timer_init(void)
+{
+ mx27_clocks_init(25000000);
+}
+
+static struct sys_timer mx27ipcam_timer = {
+ .init = mx27ipcam_timer_init,
+};
+
+MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
+ /* maintainer: Freescale Semiconductor, Inc. */
+ .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mx27_init_irq,
+ .init_machine = mx27ipcam_init,
+ .timer = &mx27ipcam_timer,
+MACHINE_END
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 3a70ebf..2315541 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -83,6 +83,7 @@
case MACH_TYPE_MX21ADS:
case MACH_TYPE_PCA100:
case MACH_TYPE_MXT_TD60:
+ case MACH_TYPE_IMX27IPCAM:
uart_base = MX2X_UART1_BASE_ADDR;
break;
case MACH_TYPE_MX31LITE: