diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
new file mode 100644
index 0000000..b9e1e15
--- /dev/null
+++ b/drivers/md/dm-raid.c
@@ -0,0 +1,697 @@
+/*
+ * Copyright (C) 2010-2011 Neil Brown
+ * Copyright (C) 2010-2011 Red Hat, Inc. All rights reserved.
+ *
+ * This file is released under the GPL.
+ */
+
+#include <linux/slab.h>
+
+#include "md.h"
+#include "raid5.h"
+#include "dm.h"
+#include "bitmap.h"
+
+#define DM_MSG_PREFIX "raid"
+
+/*
+ * If the MD doesn't support MD_SYNC_STATE_FORCED yet, then
+ * make it so the flag doesn't set anything.
+ */
+#ifndef MD_SYNC_STATE_FORCED
+#define MD_SYNC_STATE_FORCED 0
+#endif
+
+struct raid_dev {
+	/*
+	 * Two DM devices, one to hold metadata and one to hold the
+	 * actual data/parity.  The reason for this is to not confuse
+	 * ti->len and give more flexibility in altering size and
+	 * characteristics.
+	 *
+	 * While it is possible for this device to be associated
+	 * with a different physical device than the data_dev, it
+	 * is intended for it to be the same.
+	 *    |--------- Physical Device ---------|
+	 *    |- meta_dev -|------ data_dev ------|
+	 */
+	struct dm_dev *meta_dev;
+	struct dm_dev *data_dev;
+	struct mdk_rdev_s rdev;
+};
+
+/*
+ * Flags for rs->print_flags field.
+ */
+#define DMPF_DAEMON_SLEEP      0x1
+#define DMPF_MAX_WRITE_BEHIND  0x2
+#define DMPF_SYNC              0x4
+#define DMPF_NOSYNC            0x8
+#define DMPF_STRIPE_CACHE      0x10
+#define DMPF_MIN_RECOVERY_RATE 0x20
+#define DMPF_MAX_RECOVERY_RATE 0x40
+
+struct raid_set {
+	struct dm_target *ti;
+
+	uint64_t print_flags;
+
+	struct mddev_s md;
+	struct raid_type *raid_type;
+	struct dm_target_callbacks callbacks;
+
+	struct raid_dev dev[0];
+};
+
+/* Supported raid types and properties. */
+static struct raid_type {
+	const char *name;		/* RAID algorithm. */
+	const char *descr;		/* Descriptor text for logging. */
+	const unsigned parity_devs;	/* # of parity devices. */
+	const unsigned minimal_devs;	/* minimal # of devices in set. */
+	const unsigned level;		/* RAID level. */
+	const unsigned algorithm;	/* RAID algorithm. */
+} raid_types[] = {
+	{"raid4",    "RAID4 (dedicated parity disk)",	1, 2, 5, ALGORITHM_PARITY_0},
+	{"raid5_la", "RAID5 (left asymmetric)",		1, 2, 5, ALGORITHM_LEFT_ASYMMETRIC},
+	{"raid5_ra", "RAID5 (right asymmetric)",	1, 2, 5, ALGORITHM_RIGHT_ASYMMETRIC},
+	{"raid5_ls", "RAID5 (left symmetric)",		1, 2, 5, ALGORITHM_LEFT_SYMMETRIC},
+	{"raid5_rs", "RAID5 (right symmetric)",		1, 2, 5, ALGORITHM_RIGHT_SYMMETRIC},
+	{"raid6_zr", "RAID6 (zero restart)",		2, 4, 6, ALGORITHM_ROTATING_ZERO_RESTART},
+	{"raid6_nr", "RAID6 (N restart)",		2, 4, 6, ALGORITHM_ROTATING_N_RESTART},
+	{"raid6_nc", "RAID6 (N continue)",		2, 4, 6, ALGORITHM_ROTATING_N_CONTINUE}
+};
+
+static struct raid_type *get_raid_type(char *name)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(raid_types); i++)
+		if (!strcmp(raid_types[i].name, name))
+			return &raid_types[i];
+
+	return NULL;
+}
+
+static struct raid_set *context_alloc(struct dm_target *ti, struct raid_type *raid_type, unsigned raid_devs)
+{
+	unsigned i;
+	struct raid_set *rs;
+	sector_t sectors_per_dev;
+
+	if (raid_devs <= raid_type->parity_devs) {
+		ti->error = "Insufficient number of devices";
+		return ERR_PTR(-EINVAL);
+	}
+
+	sectors_per_dev = ti->len;
+	if (sector_div(sectors_per_dev, (raid_devs - raid_type->parity_devs))) {
+		ti->error = "Target length not divisible by number of data devices";
+		return ERR_PTR(-EINVAL);
+	}
+
+	rs = kzalloc(sizeof(*rs) + raid_devs * sizeof(rs->dev[0]), GFP_KERNEL);
+	if (!rs) {
+		ti->error = "Cannot allocate raid context";
+		return ERR_PTR(-ENOMEM);
+	}
+
+	mddev_init(&rs->md);
+
+	rs->ti = ti;
+	rs->raid_type = raid_type;
+	rs->md.raid_disks = raid_devs;
+	rs->md.level = raid_type->level;
+	rs->md.new_level = rs->md.level;
+	rs->md.dev_sectors = sectors_per_dev;
+	rs->md.layout = raid_type->algorithm;
+	rs->md.new_layout = rs->md.layout;
+	rs->md.delta_disks = 0;
+	rs->md.recovery_cp = 0;
+
+	for (i = 0; i < raid_devs; i++)
+		md_rdev_init(&rs->dev[i].rdev);
+
+	/*
+	 * Remaining items to be initialized by further RAID params:
+	 *  rs->md.persistent
+	 *  rs->md.external
+	 *  rs->md.chunk_sectors
+	 *  rs->md.new_chunk_sectors
+	 */
+
+	return rs;
+}
+
+static void context_free(struct raid_set *rs)
+{
+	int i;
+
+	for (i = 0; i < rs->md.raid_disks; i++)
+		if (rs->dev[i].data_dev)
+			dm_put_device(rs->ti, rs->dev[i].data_dev);
+
+	kfree(rs);
+}
+
+/*
+ * For every device we have two words
+ *  <meta_dev>: meta device name or '-' if missing
+ *  <data_dev>: data device name or '-' if missing
+ *
+ * This code parses those words.
+ */
+static int dev_parms(struct raid_set *rs, char **argv)
+{
+	int i;
+	int rebuild = 0;
+	int metadata_available = 0;
+	int ret = 0;
+
+	for (i = 0; i < rs->md.raid_disks; i++, argv += 2) {
+		rs->dev[i].rdev.raid_disk = i;
+
+		rs->dev[i].meta_dev = NULL;
+		rs->dev[i].data_dev = NULL;
+
+		/*
+		 * There are no offsets, since there is a separate device
+		 * for data and metadata.
+		 */
+		rs->dev[i].rdev.data_offset = 0;
+		rs->dev[i].rdev.mddev = &rs->md;
+
+		if (strcmp(argv[0], "-")) {
+			rs->ti->error = "Metadata devices not supported";
+			return -EINVAL;
+		}
+
+		if (!strcmp(argv[1], "-")) {
+			if (!test_bit(In_sync, &rs->dev[i].rdev.flags) &&
+			    (!rs->dev[i].rdev.recovery_offset)) {
+				rs->ti->error = "Drive designated for rebuild not specified";
+				return -EINVAL;
+			}
+
+			continue;
+		}
+
+		ret = dm_get_device(rs->ti, argv[1],
+				    dm_table_get_mode(rs->ti->table),
+				    &rs->dev[i].data_dev);
+		if (ret) {
+			rs->ti->error = "RAID device lookup failure";
+			return ret;
+		}
+
+		rs->dev[i].rdev.bdev = rs->dev[i].data_dev->bdev;
+		list_add(&rs->dev[i].rdev.same_set, &rs->md.disks);
+		if (!test_bit(In_sync, &rs->dev[i].rdev.flags))
+			rebuild++;
+	}
+
+	if (metadata_available) {
+		rs->md.external = 0;
+		rs->md.persistent = 1;
+		rs->md.major_version = 2;
+	} else if (rebuild && !rs->md.recovery_cp) {
+		/*
+		 * Without metadata, we will not be able to tell if the array
+		 * is in-sync or not - we must assume it is not.  Therefore,
+		 * it is impossible to rebuild a drive.
+		 *
+		 * Even if there is metadata, the on-disk information may
+		 * indicate that the array is not in-sync and it will then
+		 * fail at that time.
+		 *
+		 * User could specify 'nosync' option if desperate.
+		 */
+		DMERR("Unable to rebuild drive while array is not in-sync");
+		rs->ti->error = "RAID device lookup failure";
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Possible arguments are...
+ * RAID456:
+ *	<chunk_size> [optional_args]
+ *
+ * Optional args:
+ *    [[no]sync]			Force or prevent recovery of the entire array
+ *    [rebuild <idx>]			Rebuild the drive indicated by the index
+ *    [daemon_sleep <ms>]		Time between bitmap daemon work to clear bits
+ *    [min_recovery_rate <kB/sec/disk>]	Throttle RAID initialization
+ *    [max_recovery_rate <kB/sec/disk>]	Throttle RAID initialization
+ *    [max_write_behind <sectors>]	See '-write-behind=' (man mdadm)
+ *    [stripe_cache <sectors>]		Stripe cache size for higher RAIDs
+ */
+static int parse_raid_params(struct raid_set *rs, char **argv,
+			     unsigned num_raid_params)
+{
+	unsigned i, rebuild_cnt = 0;
+	unsigned long value;
+	char *key;
+
+	/*
+	 * First, parse the in-order required arguments
+	 */
+	if ((strict_strtoul(argv[0], 10, &value) < 0) ||
+	    !is_power_of_2(value) || (value < 8)) {
+		rs->ti->error = "Bad chunk size";
+		return -EINVAL;
+	}
+
+	rs->md.new_chunk_sectors = rs->md.chunk_sectors = value;
+	argv++;
+	num_raid_params--;
+
+	/*
+	 * Second, parse the unordered optional arguments
+	 */
+	for (i = 0; i < rs->md.raid_disks; i++)
+		set_bit(In_sync, &rs->dev[i].rdev.flags);
+
+	for (i = 0; i < num_raid_params; i++) {
+		if (!strcmp(argv[i], "nosync")) {
+			rs->md.recovery_cp = MaxSector;
+			rs->print_flags |= DMPF_NOSYNC;
+			rs->md.flags |= MD_SYNC_STATE_FORCED;
+			continue;
+		}
+		if (!strcmp(argv[i], "sync")) {
+			rs->md.recovery_cp = 0;
+			rs->print_flags |= DMPF_SYNC;
+			rs->md.flags |= MD_SYNC_STATE_FORCED;
+			continue;
+		}
+
+		/* The rest of the optional arguments come in key/value pairs */
+		if ((i + 1) >= num_raid_params) {
+			rs->ti->error = "Wrong number of raid parameters given";
+			return -EINVAL;
+		}
+
+		key = argv[i++];
+		if (strict_strtoul(argv[i], 10, &value) < 0) {
+			rs->ti->error = "Bad numerical argument given in raid params";
+			return -EINVAL;
+		}
+
+		if (!strcmp(key, "rebuild")) {
+			if (++rebuild_cnt > rs->raid_type->parity_devs) {
+				rs->ti->error = "Too many rebuild drives given";
+				return -EINVAL;
+			}
+			if (value > rs->md.raid_disks) {
+				rs->ti->error = "Invalid rebuild index given";
+				return -EINVAL;
+			}
+			clear_bit(In_sync, &rs->dev[value].rdev.flags);
+			rs->dev[value].rdev.recovery_offset = 0;
+		} else if (!strcmp(key, "max_write_behind")) {
+			rs->print_flags |= DMPF_MAX_WRITE_BEHIND;
+
+			/*
+			 * In device-mapper, we specify things in sectors, but
+			 * MD records this value in kB
+			 */
+			value /= 2;
+			if (value > COUNTER_MAX) {
+				rs->ti->error = "Max write-behind limit out of range";
+				return -EINVAL;
+			}
+			rs->md.bitmap_info.max_write_behind = value;
+		} else if (!strcmp(key, "daemon_sleep")) {
+			rs->print_flags |= DMPF_DAEMON_SLEEP;
+			if (!value || (value > MAX_SCHEDULE_TIMEOUT)) {
+				rs->ti->error = "daemon sleep period out of range";
+				return -EINVAL;
+			}
+			rs->md.bitmap_info.daemon_sleep = value;
+		} else if (!strcmp(key, "stripe_cache")) {
+			rs->print_flags |= DMPF_STRIPE_CACHE;
+
+			/*
+			 * In device-mapper, we specify things in sectors, but
+			 * MD records this value in kB
+			 */
+			value /= 2;
+
+			if (rs->raid_type->level < 5) {
+				rs->ti->error = "Inappropriate argument: stripe_cache";
+				return -EINVAL;
+			}
+			if (raid5_set_cache_size(&rs->md, (int)value)) {
+				rs->ti->error = "Bad stripe_cache size";
+				return -EINVAL;
+			}
+		} else if (!strcmp(key, "min_recovery_rate")) {
+			rs->print_flags |= DMPF_MIN_RECOVERY_RATE;
+			if (value > INT_MAX) {
+				rs->ti->error = "min_recovery_rate out of range";
+				return -EINVAL;
+			}
+			rs->md.sync_speed_min = (int)value;
+		} else if (!strcmp(key, "max_recovery_rate")) {
+			rs->print_flags |= DMPF_MAX_RECOVERY_RATE;
+			if (value > INT_MAX) {
+				rs->ti->error = "max_recovery_rate out of range";
+				return -EINVAL;
+			}
+			rs->md.sync_speed_max = (int)value;
+		} else {
+			DMERR("Unable to parse RAID parameter: %s", key);
+			rs->ti->error = "Unable to parse RAID parameters";
+			return -EINVAL;
+		}
+	}
+
+	/* Assume there are no metadata devices until the drives are parsed */
+	rs->md.persistent = 0;
+	rs->md.external = 1;
+
+	return 0;
+}
+
+static void do_table_event(struct work_struct *ws)
+{
+	struct raid_set *rs = container_of(ws, struct raid_set, md.event_work);
+
+	dm_table_event(rs->ti->table);
+}
+
+static int raid_is_congested(struct dm_target_callbacks *cb, int bits)
+{
+	struct raid_set *rs = container_of(cb, struct raid_set, callbacks);
+
+	return md_raid5_congested(&rs->md, bits);
+}
+
+static void raid_unplug(struct dm_target_callbacks *cb)
+{
+	struct raid_set *rs = container_of(cb, struct raid_set, callbacks);
+
+	md_raid5_unplug_device(rs->md.private);
+}
+
+/*
+ * Construct a RAID4/5/6 mapping:
+ * Args:
+ *	<raid_type> <#raid_params> <raid_params>		\
+ *	<#raid_devs> { <meta_dev1> <dev1> .. <meta_devN> <devN> }
+ *
+ * ** metadata devices are not supported yet, use '-' instead **
+ *
+ * <raid_params> varies by <raid_type>.  See 'parse_raid_params' for
+ * details on possible <raid_params>.
+ */
+static int raid_ctr(struct dm_target *ti, unsigned argc, char **argv)
+{
+	int ret;
+	struct raid_type *rt;
+	unsigned long num_raid_params, num_raid_devs;
+	struct raid_set *rs = NULL;
+
+	/* Must have at least <raid_type> <#raid_params> */
+	if (argc < 2) {
+		ti->error = "Too few arguments";
+		return -EINVAL;
+	}
+
+	/* raid type */
+	rt = get_raid_type(argv[0]);
+	if (!rt) {
+		ti->error = "Unrecognised raid_type";
+		return -EINVAL;
+	}
+	argc--;
+	argv++;
+
+	/* number of RAID parameters */
+	if (strict_strtoul(argv[0], 10, &num_raid_params) < 0) {
+		ti->error = "Cannot understand number of RAID parameters";
+		return -EINVAL;
+	}
+	argc--;
+	argv++;
+
+	/* Skip over RAID params for now and find out # of devices */
+	if (num_raid_params + 1 > argc) {
+		ti->error = "Arguments do not agree with counts given";
+		return -EINVAL;
+	}
+
+	if ((strict_strtoul(argv[num_raid_params], 10, &num_raid_devs) < 0) ||
+	    (num_raid_devs >= INT_MAX)) {
+		ti->error = "Cannot understand number of raid devices";
+		return -EINVAL;
+	}
+
+	rs = context_alloc(ti, rt, (unsigned)num_raid_devs);
+	if (IS_ERR(rs))
+		return PTR_ERR(rs);
+
+	ret = parse_raid_params(rs, argv, (unsigned)num_raid_params);
+	if (ret)
+		goto bad;
+
+	ret = -EINVAL;
+
+	argc -= num_raid_params + 1; /* +1: we already have num_raid_devs */
+	argv += num_raid_params + 1;
+
+	if (argc != (num_raid_devs * 2)) {
+		ti->error = "Supplied RAID devices does not match the count given";
+		goto bad;
+	}
+
+	ret = dev_parms(rs, argv);
+	if (ret)
+		goto bad;
+
+	INIT_WORK(&rs->md.event_work, do_table_event);
+	ti->split_io = rs->md.chunk_sectors;
+	ti->private = rs;
+
+	mutex_lock(&rs->md.reconfig_mutex);
+	ret = md_run(&rs->md);
+	rs->md.in_sync = 0; /* Assume already marked dirty */
+	mutex_unlock(&rs->md.reconfig_mutex);
+
+	if (ret) {
+		ti->error = "Fail to run raid array";
+		goto bad;
+	}
+
+	rs->callbacks.congested_fn = raid_is_congested;
+	rs->callbacks.unplug_fn = raid_unplug;
+	dm_table_add_target_callbacks(ti->table, &rs->callbacks);
+
+	return 0;
+
+bad:
+	context_free(rs);
+
+	return ret;
+}
+
+static void raid_dtr(struct dm_target *ti)
+{
+	struct raid_set *rs = ti->private;
+
+	list_del_init(&rs->callbacks.list);
+	md_stop(&rs->md);
+	context_free(rs);
+}
+
+static int raid_map(struct dm_target *ti, struct bio *bio, union map_info *map_context)
+{
+	struct raid_set *rs = ti->private;
+	mddev_t *mddev = &rs->md;
+
+	mddev->pers->make_request(mddev, bio);
+
+	return DM_MAPIO_SUBMITTED;
+}
+
+static int raid_status(struct dm_target *ti, status_type_t type,
+		       char *result, unsigned maxlen)
+{
+	struct raid_set *rs = ti->private;
+	unsigned raid_param_cnt = 1; /* at least 1 for chunksize */
+	unsigned sz = 0;
+	int i;
+	sector_t sync;
+
+	switch (type) {
+	case STATUSTYPE_INFO:
+		DMEMIT("%s %d ", rs->raid_type->name, rs->md.raid_disks);
+
+		for (i = 0; i < rs->md.raid_disks; i++) {
+			if (test_bit(Faulty, &rs->dev[i].rdev.flags))
+				DMEMIT("D");
+			else if (test_bit(In_sync, &rs->dev[i].rdev.flags))
+				DMEMIT("A");
+			else
+				DMEMIT("a");
+		}
+
+		if (test_bit(MD_RECOVERY_RUNNING, &rs->md.recovery))
+			sync = rs->md.curr_resync_completed;
+		else
+			sync = rs->md.recovery_cp;
+
+		if (sync > rs->md.resync_max_sectors)
+			sync = rs->md.resync_max_sectors;
+
+		DMEMIT(" %llu/%llu",
+		       (unsigned long long) sync,
+		       (unsigned long long) rs->md.resync_max_sectors);
+
+		break;
+	case STATUSTYPE_TABLE:
+		/* The string you would use to construct this array */
+		for (i = 0; i < rs->md.raid_disks; i++)
+			if (rs->dev[i].data_dev &&
+			    !test_bit(In_sync, &rs->dev[i].rdev.flags))
+				raid_param_cnt++; /* for rebuilds */
+
+		raid_param_cnt += (hweight64(rs->print_flags) * 2);
+		if (rs->print_flags & (DMPF_SYNC | DMPF_NOSYNC))
+			raid_param_cnt--;
+
+		DMEMIT("%s %u %u", rs->raid_type->name,
+		       raid_param_cnt, rs->md.chunk_sectors);
+
+		if ((rs->print_flags & DMPF_SYNC) &&
+		    (rs->md.recovery_cp == MaxSector))
+			DMEMIT(" sync");
+		if (rs->print_flags & DMPF_NOSYNC)
+			DMEMIT(" nosync");
+
+		for (i = 0; i < rs->md.raid_disks; i++)
+			if (rs->dev[i].data_dev &&
+			    !test_bit(In_sync, &rs->dev[i].rdev.flags))
+				DMEMIT(" rebuild %u", i);
+
+		if (rs->print_flags & DMPF_DAEMON_SLEEP)
+			DMEMIT(" daemon_sleep %lu",
+			       rs->md.bitmap_info.daemon_sleep);
+
+		if (rs->print_flags & DMPF_MIN_RECOVERY_RATE)
+			DMEMIT(" min_recovery_rate %d", rs->md.sync_speed_min);
+
+		if (rs->print_flags & DMPF_MAX_RECOVERY_RATE)
+			DMEMIT(" max_recovery_rate %d", rs->md.sync_speed_max);
+
+		if (rs->print_flags & DMPF_MAX_WRITE_BEHIND)
+			DMEMIT(" max_write_behind %lu",
+			       rs->md.bitmap_info.max_write_behind);
+
+		if (rs->print_flags & DMPF_STRIPE_CACHE) {
+			raid5_conf_t *conf = rs->md.private;
+
+			/* convert from kiB to sectors */
+			DMEMIT(" stripe_cache %d",
+			       conf ? conf->max_nr_stripes * 2 : 0);
+		}
+
+		DMEMIT(" %d", rs->md.raid_disks);
+		for (i = 0; i < rs->md.raid_disks; i++) {
+			DMEMIT(" -"); /* metadata device */
+
+			if (rs->dev[i].data_dev)
+				DMEMIT(" %s", rs->dev[i].data_dev->name);
+			else
+				DMEMIT(" -");
+		}
+	}
+
+	return 0;
+}
+
+static int raid_iterate_devices(struct dm_target *ti, iterate_devices_callout_fn fn, void *data)
+{
+	struct raid_set *rs = ti->private;
+	unsigned i;
+	int ret = 0;
+
+	for (i = 0; !ret && i < rs->md.raid_disks; i++)
+		if (rs->dev[i].data_dev)
+			ret = fn(ti,
+				 rs->dev[i].data_dev,
+				 0, /* No offset on data devs */
+				 rs->md.dev_sectors,
+				 data);
+
+	return ret;
+}
+
+static void raid_io_hints(struct dm_target *ti, struct queue_limits *limits)
+{
+	struct raid_set *rs = ti->private;
+	unsigned chunk_size = rs->md.chunk_sectors << 9;
+	raid5_conf_t *conf = rs->md.private;
+
+	blk_limits_io_min(limits, chunk_size);
+	blk_limits_io_opt(limits, chunk_size * (conf->raid_disks - conf->max_degraded));
+}
+
+static void raid_presuspend(struct dm_target *ti)
+{
+	struct raid_set *rs = ti->private;
+
+	md_stop_writes(&rs->md);
+}
+
+static void raid_postsuspend(struct dm_target *ti)
+{
+	struct raid_set *rs = ti->private;
+
+	mddev_suspend(&rs->md);
+}
+
+static void raid_resume(struct dm_target *ti)
+{
+	struct raid_set *rs = ti->private;
+
+	mddev_resume(&rs->md);
+}
+
+static struct target_type raid_target = {
+	.name = "raid",
+	.version = {1, 0, 0},
+	.module = THIS_MODULE,
+	.ctr = raid_ctr,
+	.dtr = raid_dtr,
+	.map = raid_map,
+	.status = raid_status,
+	.iterate_devices = raid_iterate_devices,
+	.io_hints = raid_io_hints,
+	.presuspend = raid_presuspend,
+	.postsuspend = raid_postsuspend,
+	.resume = raid_resume,
+};
+
+static int __init dm_raid_init(void)
+{
+	return dm_register_target(&raid_target);
+}
+
+static void __exit dm_raid_exit(void)
+{
+	dm_unregister_target(&raid_target);
+}
+
+module_init(dm_raid_init);
+module_exit(dm_raid_exit);
+
+MODULE_DESCRIPTION(DM_NAME " raid4/5/6 target");
+MODULE_ALIAS("dm-raid4");
+MODULE_ALIAS("dm-raid5");
+MODULE_ALIAS("dm-raid6");
+MODULE_AUTHOR("Neil Brown <dm-devel@redhat.com>");
+MODULE_LICENSE("GPL");