arch/powerpc/sysdev/cpm1.c - kernel/msm-4.19 - Gitiles

 /*
  * General Purpose functions for the global management of the
  * Communication Processor Module.
  * Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
  *
  * In addition to the individual control of the communication
  * channels, there are a few functions that globally affect the
  * communication processor.
  *
  * Buffer descriptors must be allocated from the dual ported memory
  * space.  The allocator for that is here.  When the communication
  * process is reset, we reclaim the memory available.  There is
  * currently no deallocator for this memory.
  * The amount of space available is platform dependent.  On the
  * MBX, the EPPC software loads additional microcode into the
  * communication processor, and uses some of the DP ram for this
  * purpose.  Current, the first 512 bytes and the last 256 bytes of
  * memory are used.  Right now I am conservative and only use the
  * memory that can never be used for microcode.  If there are
  * applications that require more DP ram, we can expand the boundaries
  * but then we have to be careful of any downloaded microcode.
  */
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/dma-mapping.h>
 #include <linux/param.h>
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
 #include <asm/cpm1.h>
 #include <asm/io.h>
 #include <asm/tlbflush.h>
 #include <asm/rheap.h>
 #include <asm/prom.h>
 #include <asm/cpm.h>

 #include <asm/fs_pd.h>

 #ifdef CONFIG_8xx_GPIO
 #include <linux/of_gpio.h>
 #endif

 #define CPM_MAP_SIZE    (0x4000)

 cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
 immap_t __iomem *mpc8xx_immr;
 static cpic8xx_t __iomem *cpic_reg;

 static struct irq_domain *cpm_pic_host;

 static void cpm_mask_irq(struct irq_data *d)
 {
 	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);

 	clrbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
 }

 static void cpm_unmask_irq(struct irq_data *d)
 {
 	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);

 	setbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
 }

 static void cpm_end_irq(struct irq_data *d)
 {
 	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);

 	out_be32(&cpic_reg->cpic_cisr, (1 << cpm_vec));
 }

 static struct irq_chip cpm_pic = {
 	.name = "CPM PIC",
 	.irq_mask = cpm_mask_irq,
 	.irq_unmask = cpm_unmask_irq,
 	.irq_eoi = cpm_end_irq,
 };

 int cpm_get_irq(void)
 {
 	int cpm_vec;

 	/* Get the vector by setting the ACK bit and then reading
 	 * the register.
 	 */
 	out_be16(&cpic_reg->cpic_civr, 1);
 	cpm_vec = in_be16(&cpic_reg->cpic_civr);
 	cpm_vec >>= 11;

 	return irq_linear_revmap(cpm_pic_host, cpm_vec);
 }

 static int cpm_pic_host_map(struct irq_domain *h, unsigned int virq,
 			  irq_hw_number_t hw)
 {
 	pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw);

 	irq_set_status_flags(virq, IRQ_LEVEL);
 	irq_set_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq);
 	return 0;
 }

 /* The CPM can generate the error interrupt when there is a race condition
  * between generating and masking interrupts.  All we have to do is ACK it
  * and return.  This is a no-op function so we don't need any special
  * tests in the interrupt handler.
  */
 static irqreturn_t cpm_error_interrupt(int irq, void *dev)
 {
 	return IRQ_HANDLED;
 }

 static struct irqaction cpm_error_irqaction = {
 	.handler = cpm_error_interrupt,
 	.flags = IRQF_NO_THREAD,
 	.name = "error",
 };

 static const struct irq_domain_ops cpm_pic_host_ops = {
 	.map = cpm_pic_host_map,
 };

 unsigned int cpm_pic_init(void)
 {
 	struct device_node *np = NULL;
 	struct resource res;
 	unsigned int sirq = NO_IRQ, hwirq, eirq;
 	int ret;

 	pr_debug("cpm_pic_init\n");

 	np = of_find_compatible_node(NULL, NULL, "fsl,cpm1-pic");
 	if (np == NULL)
 		np = of_find_compatible_node(NULL, "cpm-pic", "CPM");
 	if (np == NULL) {
 		printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n");
 		return sirq;
 	}

 	ret = of_address_to_resource(np, 0, &res);
 	if (ret)
 		goto end;

 	cpic_reg = ioremap(res.start, resource_size(&res));
 	if (cpic_reg == NULL)
 		goto end;

 	sirq = irq_of_parse_and_map(np, 0);
 	if (sirq == NO_IRQ)
 		goto end;

 	/* Initialize the CPM interrupt controller. */
 	hwirq = (unsigned int)virq_to_hw(sirq);
 	out_be32(&cpic_reg->cpic_cicr,
 	    (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
 		((hwirq/2) << 13) | CICR_HP_MASK);

 	out_be32(&cpic_reg->cpic_cimr, 0);

 	cpm_pic_host = irq_domain_add_linear(np, 64, &cpm_pic_host_ops, NULL);
 	if (cpm_pic_host == NULL) {
 		printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
 		sirq = NO_IRQ;
 		goto end;
 	}

 	/* Install our own error handler. */
 	np = of_find_compatible_node(NULL, NULL, "fsl,cpm1");
 	if (np == NULL)
 		np = of_find_node_by_type(NULL, "cpm");
 	if (np == NULL) {
 		printk(KERN_ERR "CPM PIC init: can not find cpm node\n");
 		goto end;
 	}

 	eirq = irq_of_parse_and_map(np, 0);
 	if (eirq == NO_IRQ)
 		goto end;

 	if (setup_irq(eirq, &cpm_error_irqaction))
 		printk(KERN_ERR "Could not allocate CPM error IRQ!");

 	setbits32(&cpic_reg->cpic_cicr, CICR_IEN);

 end:
 	of_node_put(np);
 	return sirq;
 }

 void __init cpm_reset(void)
 {
 	sysconf8xx_t __iomem *siu_conf;

 	mpc8xx_immr = ioremap(get_immrbase(), 0x4000);
 	if (!mpc8xx_immr) {
 		printk(KERN_CRIT "Could not map IMMR\n");
 		return;
 	}

 	cpmp = &mpc8xx_immr->im_cpm;

 #ifndef CONFIG_PPC_EARLY_DEBUG_CPM
 	/* Perform a reset.
 	*/
 	out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG);

 	/* Wait for it.
 	*/
 	while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG);
 #endif

 #ifdef CONFIG_UCODE_PATCH
 	cpm_load_patch(cpmp);
 #endif

 	/* Set SDMA Bus Request priority 5.
 	 * On 860T, this also enables FEC priority 6.  I am not sure
 	 * this is what we really want for some applications, but the
 	 * manual recommends it.
 	 * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
 	 */
 	siu_conf = immr_map(im_siu_conf);
 	if ((mfspr(SPRN_IMMR) & 0xffff) == 0x0900) /* MPC885 */
 		out_be32(&siu_conf->sc_sdcr, 0x40);
 	else
 		out_be32(&siu_conf->sc_sdcr, 1);
 	immr_unmap(siu_conf);

 	cpm_muram_init();
 }

 static DEFINE_SPINLOCK(cmd_lock);

 #define MAX_CR_CMD_LOOPS        10000

 int cpm_command(u32 command, u8 opcode)
 {
 	int i, ret;
 	unsigned long flags;

 	if (command & 0xffffff0f)
 		return -EINVAL;

 	spin_lock_irqsave(&cmd_lock, flags);

 	ret = 0;
 	out_be16(&cpmp->cp_cpcr, command | CPM_CR_FLG | (opcode << 8));
 	for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
 		if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
 			goto out;

 	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
 	ret = -EIO;
 out:
 	spin_unlock_irqrestore(&cmd_lock, flags);
 	return ret;
 }
 EXPORT_SYMBOL(cpm_command);

 /* Set a baud rate generator.  This needs lots of work.  There are
  * four BRGs, any of which can be wired to any channel.
  * The internal baud rate clock is the system clock divided by 16.
  * This assumes the baudrate is 16x oversampled by the uart.
  */
 #define BRG_INT_CLK		(get_brgfreq())
 #define BRG_UART_CLK		(BRG_INT_CLK/16)
 #define BRG_UART_CLK_DIV16	(BRG_UART_CLK/16)

 void
 cpm_setbrg(uint brg, uint rate)
 {
 	u32 __iomem *bp;

 	/* This is good enough to get SMCs running.....
 	*/
 	bp = &cpmp->cp_brgc1;
 	bp += brg;
 	/* The BRG has a 12-bit counter.  For really slow baud rates (or
 	 * really fast processors), we may have to further divide by 16.
 	 */
 	if (((BRG_UART_CLK / rate) - 1) < 4096)
 		out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
 	else
 		out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
 			      CPM_BRG_EN | CPM_BRG_DIV16);
 }

 struct cpm_ioport16 {
 	__be16 dir, par, odr_sor, dat, intr;
 	__be16 res[3];
 };

 struct cpm_ioport32b {
 	__be32 dir, par, odr, dat;
 };

 struct cpm_ioport32e {
 	__be32 dir, par, sor, odr, dat;
 };

 static void cpm1_set_pin32(int port, int pin, int flags)
 {
 	struct cpm_ioport32e __iomem *iop;
 	pin = 1 << (31 - pin);

 	if (port == CPM_PORTB)
 		iop = (struct cpm_ioport32e __iomem *)
 		      &mpc8xx_immr->im_cpm.cp_pbdir;
 	else
 		iop = (struct cpm_ioport32e __iomem *)
 		      &mpc8xx_immr->im_cpm.cp_pedir;

 	if (flags & CPM_PIN_OUTPUT)
 		setbits32(&iop->dir, pin);
 	else
 		clrbits32(&iop->dir, pin);

 	if (!(flags & CPM_PIN_GPIO))
 		setbits32(&iop->par, pin);
 	else
 		clrbits32(&iop->par, pin);

 	if (port == CPM_PORTB) {
 		if (flags & CPM_PIN_OPENDRAIN)
 			setbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
 		else
 			clrbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
 	}

 	if (port == CPM_PORTE) {
 		if (flags & CPM_PIN_SECONDARY)
 			setbits32(&iop->sor, pin);
 		else
 			clrbits32(&iop->sor, pin);

 		if (flags & CPM_PIN_OPENDRAIN)
 			setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
 		else
 			clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
 	}
 }

 static void cpm1_set_pin16(int port, int pin, int flags)
 {
 	struct cpm_ioport16 __iomem *iop =
 		(struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport;

 	pin = 1 << (15 - pin);

 	if (port != 0)
 		iop += port - 1;

 	if (flags & CPM_PIN_OUTPUT)
 		setbits16(&iop->dir, pin);
 	else
 		clrbits16(&iop->dir, pin);

 	if (!(flags & CPM_PIN_GPIO))
 		setbits16(&iop->par, pin);
 	else
 		clrbits16(&iop->par, pin);

 	if (port == CPM_PORTA) {
 		if (flags & CPM_PIN_OPENDRAIN)
 			setbits16(&iop->odr_sor, pin);
 		else
 			clrbits16(&iop->odr_sor, pin);
 	}
 	if (port == CPM_PORTC) {
 		if (flags & CPM_PIN_SECONDARY)
 			setbits16(&iop->odr_sor, pin);
 		else
 			clrbits16(&iop->odr_sor, pin);
 	}
 }

 void cpm1_set_pin(enum cpm_port port, int pin, int flags)
 {
 	if (port == CPM_PORTB || port == CPM_PORTE)
 		cpm1_set_pin32(port, pin, flags);
 	else
 		cpm1_set_pin16(port, pin, flags);
 }

 int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
 {
 	int shift;
 	int i, bits = 0;
 	u32 __iomem *reg;
 	u32 mask = 7;

 	u8 clk_map[][3] = {
 		{CPM_CLK_SCC1, CPM_BRG1, 0},
 		{CPM_CLK_SCC1, CPM_BRG2, 1},
 		{CPM_CLK_SCC1, CPM_BRG3, 2},
 		{CPM_CLK_SCC1, CPM_BRG4, 3},
 		{CPM_CLK_SCC1, CPM_CLK1, 4},
 		{CPM_CLK_SCC1, CPM_CLK2, 5},
 		{CPM_CLK_SCC1, CPM_CLK3, 6},
 		{CPM_CLK_SCC1, CPM_CLK4, 7},

 		{CPM_CLK_SCC2, CPM_BRG1, 0},
 		{CPM_CLK_SCC2, CPM_BRG2, 1},
 		{CPM_CLK_SCC2, CPM_BRG3, 2},
 		{CPM_CLK_SCC2, CPM_BRG4, 3},
 		{CPM_CLK_SCC2, CPM_CLK1, 4},
 		{CPM_CLK_SCC2, CPM_CLK2, 5},
 		{CPM_CLK_SCC2, CPM_CLK3, 6},
 		{CPM_CLK_SCC2, CPM_CLK4, 7},

 		{CPM_CLK_SCC3, CPM_BRG1, 0},
 		{CPM_CLK_SCC3, CPM_BRG2, 1},
 		{CPM_CLK_SCC3, CPM_BRG3, 2},
 		{CPM_CLK_SCC3, CPM_BRG4, 3},
 		{CPM_CLK_SCC3, CPM_CLK5, 4},
 		{CPM_CLK_SCC3, CPM_CLK6, 5},
 		{CPM_CLK_SCC3, CPM_CLK7, 6},
 		{CPM_CLK_SCC3, CPM_CLK8, 7},

 		{CPM_CLK_SCC4, CPM_BRG1, 0},
 		{CPM_CLK_SCC4, CPM_BRG2, 1},
 		{CPM_CLK_SCC4, CPM_BRG3, 2},
 		{CPM_CLK_SCC4, CPM_BRG4, 3},
 		{CPM_CLK_SCC4, CPM_CLK5, 4},
 		{CPM_CLK_SCC4, CPM_CLK6, 5},
 		{CPM_CLK_SCC4, CPM_CLK7, 6},
 		{CPM_CLK_SCC4, CPM_CLK8, 7},

 		{CPM_CLK_SMC1, CPM_BRG1, 0},
 		{CPM_CLK_SMC1, CPM_BRG2, 1},
 		{CPM_CLK_SMC1, CPM_BRG3, 2},
 		{CPM_CLK_SMC1, CPM_BRG4, 3},
 		{CPM_CLK_SMC1, CPM_CLK1, 4},
 		{CPM_CLK_SMC1, CPM_CLK2, 5},
 		{CPM_CLK_SMC1, CPM_CLK3, 6},
 		{CPM_CLK_SMC1, CPM_CLK4, 7},

 		{CPM_CLK_SMC2, CPM_BRG1, 0},
 		{CPM_CLK_SMC2, CPM_BRG2, 1},
 		{CPM_CLK_SMC2, CPM_BRG3, 2},
 		{CPM_CLK_SMC2, CPM_BRG4, 3},
 		{CPM_CLK_SMC2, CPM_CLK5, 4},
 		{CPM_CLK_SMC2, CPM_CLK6, 5},
 		{CPM_CLK_SMC2, CPM_CLK7, 6},
 		{CPM_CLK_SMC2, CPM_CLK8, 7},
 	};

 	switch (target) {
 	case CPM_CLK_SCC1:
 		reg = &mpc8xx_immr->im_cpm.cp_sicr;
 		shift = 0;
 		break;

 	case CPM_CLK_SCC2:
 		reg = &mpc8xx_immr->im_cpm.cp_sicr;
 		shift = 8;
 		break;

 	case CPM_CLK_SCC3:
 		reg = &mpc8xx_immr->im_cpm.cp_sicr;
 		shift = 16;
 		break;

 	case CPM_CLK_SCC4:
 		reg = &mpc8xx_immr->im_cpm.cp_sicr;
 		shift = 24;
 		break;

 	case CPM_CLK_SMC1:
 		reg = &mpc8xx_immr->im_cpm.cp_simode;
 		shift = 12;
 		break;

 	case CPM_CLK_SMC2:
 		reg = &mpc8xx_immr->im_cpm.cp_simode;
 		shift = 28;
 		break;

 	default:
 		printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n");
 		return -EINVAL;
 	}

 	for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
 		if (clk_map[i][0] == target && clk_map[i][1] == clock) {
 			bits = clk_map[i][2];
 			break;
 		}
 	}

 	if (i == ARRAY_SIZE(clk_map)) {
 		printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n");
 		return -EINVAL;
 	}

 	bits <<= shift;
 	mask <<= shift;

 	if (reg == &mpc8xx_immr->im_cpm.cp_sicr) {
 		if (mode == CPM_CLK_RTX) {
 			bits |= bits << 3;
 			mask |= mask << 3;
 		} else if (mode == CPM_CLK_RX) {
 			bits <<= 3;
 			mask <<= 3;
 		}
 	}

 	out_be32(reg, (in_be32(reg) & ~mask) | bits);

 	return 0;
 }

 /*
  * GPIO LIB API implementation
  */
 #ifdef CONFIG_8xx_GPIO

 struct cpm1_gpio16_chip {
 	struct of_mm_gpio_chip mm_gc;
 	spinlock_t lock;

 	/* shadowed data register to clear/set bits safely */
 	u16 cpdata;
 };

 static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
 {
 	struct cpm1_gpio16_chip *cpm1_gc =
 		container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
 	struct cpm_ioport16 __iomem *iop = mm_gc->regs;

 	cpm1_gc->cpdata = in_be16(&iop->dat);
 }

 static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
 	u16 pin_mask;

 	pin_mask = 1 << (15 - gpio);

 	return !!(in_be16(&iop->dat) & pin_mask);
 }

 static void __cpm1_gpio16_set(struct of_mm_gpio_chip *mm_gc, u16 pin_mask,
 	int value)
 {
 	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 	struct cpm_ioport16 __iomem *iop = mm_gc->regs;

 	if (value)
 		cpm1_gc->cpdata |= pin_mask;
 	else
 		cpm1_gc->cpdata &= ~pin_mask;

 	out_be16(&iop->dat, cpm1_gc->cpdata);
 }

 static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 	unsigned long flags;
 	u16 pin_mask = 1 << (15 - gpio);

 	spin_lock_irqsave(&cpm1_gc->lock, flags);

 	__cpm1_gpio16_set(mm_gc, pin_mask, value);

 	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
 }

 static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
 	unsigned long flags;
 	u16 pin_mask = 1 << (15 - gpio);

 	spin_lock_irqsave(&cpm1_gc->lock, flags);

 	setbits16(&iop->dir, pin_mask);
 	__cpm1_gpio16_set(mm_gc, pin_mask, val);

 	spin_unlock_irqrestore(&cpm1_gc->lock, flags);

 	return 0;
 }

 static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
 	unsigned long flags;
 	u16 pin_mask = 1 << (15 - gpio);

 	spin_lock_irqsave(&cpm1_gc->lock, flags);

 	clrbits16(&iop->dir, pin_mask);

 	spin_unlock_irqrestore(&cpm1_gc->lock, flags);

 	return 0;
 }

 int cpm1_gpiochip_add16(struct device_node *np)
 {
 	struct cpm1_gpio16_chip *cpm1_gc;
 	struct of_mm_gpio_chip *mm_gc;
 	struct gpio_chip *gc;

 	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
 	if (!cpm1_gc)
 		return -ENOMEM;

 	spin_lock_init(&cpm1_gc->lock);

 	mm_gc = &cpm1_gc->mm_gc;
 	gc = &mm_gc->gc;

 	mm_gc->save_regs = cpm1_gpio16_save_regs;
 	gc->ngpio = 16;
 	gc->direction_input = cpm1_gpio16_dir_in;
 	gc->direction_output = cpm1_gpio16_dir_out;
 	gc->get = cpm1_gpio16_get;
 	gc->set = cpm1_gpio16_set;

 	return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
 }

 struct cpm1_gpio32_chip {
 	struct of_mm_gpio_chip mm_gc;
 	spinlock_t lock;

 	/* shadowed data register to clear/set bits safely */
 	u32 cpdata;
 };

 static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
 {
 	struct cpm1_gpio32_chip *cpm1_gc =
 		container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
 	struct cpm_ioport32b __iomem *iop = mm_gc->regs;

 	cpm1_gc->cpdata = in_be32(&iop->dat);
 }

 static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
 	u32 pin_mask;

 	pin_mask = 1 << (31 - gpio);

 	return !!(in_be32(&iop->dat) & pin_mask);
 }

 static void __cpm1_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
 	int value)
 {
 	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 	struct cpm_ioport32b __iomem *iop = mm_gc->regs;

 	if (value)
 		cpm1_gc->cpdata |= pin_mask;
 	else
 		cpm1_gc->cpdata &= ~pin_mask;

 	out_be32(&iop->dat, cpm1_gc->cpdata);
 }

 static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 	unsigned long flags;
 	u32 pin_mask = 1 << (31 - gpio);

 	spin_lock_irqsave(&cpm1_gc->lock, flags);

 	__cpm1_gpio32_set(mm_gc, pin_mask, value);

 	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
 }

 static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
 	unsigned long flags;
 	u32 pin_mask = 1 << (31 - gpio);

 	spin_lock_irqsave(&cpm1_gc->lock, flags);

 	setbits32(&iop->dir, pin_mask);
 	__cpm1_gpio32_set(mm_gc, pin_mask, val);

 	spin_unlock_irqrestore(&cpm1_gc->lock, flags);

 	return 0;
 }

 static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
 	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
 	unsigned long flags;
 	u32 pin_mask = 1 << (31 - gpio);

 	spin_lock_irqsave(&cpm1_gc->lock, flags);

 	clrbits32(&iop->dir, pin_mask);

 	spin_unlock_irqrestore(&cpm1_gc->lock, flags);

 	return 0;
 }

 int cpm1_gpiochip_add32(struct device_node *np)
 {
 	struct cpm1_gpio32_chip *cpm1_gc;
 	struct of_mm_gpio_chip *mm_gc;
 	struct gpio_chip *gc;

 	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
 	if (!cpm1_gc)
 		return -ENOMEM;

 	spin_lock_init(&cpm1_gc->lock);

 	mm_gc = &cpm1_gc->mm_gc;
 	gc = &mm_gc->gc;

 	mm_gc->save_regs = cpm1_gpio32_save_regs;
 	gc->ngpio = 32;
 	gc->direction_input = cpm1_gpio32_dir_in;
 	gc->direction_output = cpm1_gpio32_dir_out;
 	gc->get = cpm1_gpio32_get;
 	gc->set = cpm1_gpio32_set;

 	return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
 }

 static int cpm_init_par_io(void)
 {
 	struct device_node *np;

 	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a")
 		cpm1_gpiochip_add16(np);

 	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b")
 		cpm1_gpiochip_add32(np);

 	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c")
 		cpm1_gpiochip_add16(np);

 	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d")
 		cpm1_gpiochip_add16(np);

 	/* Port E uses CPM2 layout */
 	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e")
 		cpm2_gpiochip_add32(np);
 	return 0;
 }
 arch_initcall(cpm_init_par_io);

 #endif /* CONFIG_8xx_GPIO */
	/*
	* General Purpose functions for the global management of the
	* Communication Processor Module.
	* Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
	*
	* In addition to the individual control of the communication
	* channels, there are a few functions that globally affect the
	* communication processor.
	*
	* Buffer descriptors must be allocated from the dual ported memory
	* space. The allocator for that is here. When the communication
	* process is reset, we reclaim the memory available. There is
	* currently no deallocator for this memory.
	* The amount of space available is platform dependent. On the
	* MBX, the EPPC software loads additional microcode into the
	* communication processor, and uses some of the DP ram for this
	* purpose. Current, the first 512 bytes and the last 256 bytes of
	* memory are used. Right now I am conservative and only use the
	* memory that can never be used for microcode. If there are
	* applications that require more DP ram, we can expand the boundaries
	* but then we have to be careful of any downloaded microcode.
	*/
	#include <linux/errno.h>
	#include <linux/sched.h>
	#include <linux/kernel.h>
	#include <linux/dma-mapping.h>
	#include <linux/param.h>
	#include <linux/string.h>
	#include <linux/mm.h>
	#include <linux/interrupt.h>
	#include <linux/irq.h>
	#include <linux/module.h>
	#include <linux/spinlock.h>
	#include <linux/slab.h>
	#include <asm/page.h>
	#include <asm/pgtable.h>
	#include <asm/8xx_immap.h>
	#include <asm/cpm1.h>
	#include <asm/io.h>
	#include <asm/tlbflush.h>
	#include <asm/rheap.h>
	#include <asm/prom.h>
	#include <asm/cpm.h>

	#include <asm/fs_pd.h>

	#ifdef CONFIG_8xx_GPIO
	#include <linux/of_gpio.h>
	#endif

	#define CPM_MAP_SIZE (0x4000)

	cpm8xx_t __iomem cpmp; / Pointer to comm processor space */
	immap_t __iomem *mpc8xx_immr;
	static cpic8xx_t __iomem *cpic_reg;

	static struct irq_domain *cpm_pic_host;

	static void cpm_mask_irq(struct irq_data *d)
	{
	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);

	clrbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
	}

	static void cpm_unmask_irq(struct irq_data *d)
	{
	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);

	setbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
	}

	static void cpm_end_irq(struct irq_data *d)
	{
	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);

	out_be32(&cpic_reg->cpic_cisr, (1 << cpm_vec));
	}

	static struct irq_chip cpm_pic = {
	.name = "CPM PIC",
	.irq_mask = cpm_mask_irq,
	.irq_unmask = cpm_unmask_irq,
	.irq_eoi = cpm_end_irq,
	};

	int cpm_get_irq(void)
	{
	int cpm_vec;

	/* Get the vector by setting the ACK bit and then reading
	* the register.
	*/
	out_be16(&cpic_reg->cpic_civr, 1);
	cpm_vec = in_be16(&cpic_reg->cpic_civr);
	cpm_vec >>= 11;

	return irq_linear_revmap(cpm_pic_host, cpm_vec);
	}

	static int cpm_pic_host_map(struct irq_domain *h, unsigned int virq,
	irq_hw_number_t hw)
	{
	pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw);

	irq_set_status_flags(virq, IRQ_LEVEL);
	irq_set_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq);
	return 0;
	}

	/* The CPM can generate the error interrupt when there is a race condition
	* between generating and masking interrupts. All we have to do is ACK it
	* and return. This is a no-op function so we don't need any special
	* tests in the interrupt handler.
	*/
	static irqreturn_t cpm_error_interrupt(int irq, void *dev)
	{
	return IRQ_HANDLED;
	}

	static struct irqaction cpm_error_irqaction = {
	.handler = cpm_error_interrupt,
	.flags = IRQF_NO_THREAD,
	.name = "error",
	};

	static const struct irq_domain_ops cpm_pic_host_ops = {
	.map = cpm_pic_host_map,
	};

	unsigned int cpm_pic_init(void)
	{
	struct device_node *np = NULL;
	struct resource res;
	unsigned int sirq = NO_IRQ, hwirq, eirq;
	int ret;

	pr_debug("cpm_pic_init\n");

	np = of_find_compatible_node(NULL, NULL, "fsl,cpm1-pic");
	if (np == NULL)
	np = of_find_compatible_node(NULL, "cpm-pic", "CPM");
	if (np == NULL) {
	printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n");
	return sirq;
	}

	ret = of_address_to_resource(np, 0, &res);
	if (ret)
	goto end;

	cpic_reg = ioremap(res.start, resource_size(&res));
	if (cpic_reg == NULL)
	goto end;

	sirq = irq_of_parse_and_map(np, 0);
	if (sirq == NO_IRQ)
	goto end;

	/* Initialize the CPM interrupt controller. */
	hwirq = (unsigned int)virq_to_hw(sirq);
	out_be32(&cpic_reg->cpic_cicr,
	(CICR_SCD_SCC4 \| CICR_SCC_SCC3 \| CICR_SCB_SCC2 \| CICR_SCA_SCC1) \|
	((hwirq/2) << 13) \| CICR_HP_MASK);

	out_be32(&cpic_reg->cpic_cimr, 0);

	cpm_pic_host = irq_domain_add_linear(np, 64, &cpm_pic_host_ops, NULL);
	if (cpm_pic_host == NULL) {
	printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
	sirq = NO_IRQ;
	goto end;
	}

	/* Install our own error handler. */
	np = of_find_compatible_node(NULL, NULL, "fsl,cpm1");
	if (np == NULL)
	np = of_find_node_by_type(NULL, "cpm");
	if (np == NULL) {
	printk(KERN_ERR "CPM PIC init: can not find cpm node\n");
	goto end;
	}

	eirq = irq_of_parse_and_map(np, 0);
	if (eirq == NO_IRQ)
	goto end;

	if (setup_irq(eirq, &cpm_error_irqaction))
	printk(KERN_ERR "Could not allocate CPM error IRQ!");

	setbits32(&cpic_reg->cpic_cicr, CICR_IEN);

	end:
	of_node_put(np);
	return sirq;
	}

	void __init cpm_reset(void)
	{
	sysconf8xx_t __iomem *siu_conf;

	mpc8xx_immr = ioremap(get_immrbase(), 0x4000);
	if (!mpc8xx_immr) {
	printk(KERN_CRIT "Could not map IMMR\n");
	return;
	}

	cpmp = &mpc8xx_immr->im_cpm;

	#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
	/* Perform a reset.
	*/
	out_be16(&cpmp->cp_cpcr, CPM_CR_RST \| CPM_CR_FLG);

	/* Wait for it.
	*/
	while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG);
	#endif

	#ifdef CONFIG_UCODE_PATCH
	cpm_load_patch(cpmp);
	#endif

	/* Set SDMA Bus Request priority 5.
	* On 860T, this also enables FEC priority 6. I am not sure
	* this is what we really want for some applications, but the
	* manual recommends it.
	* Bit 25, FAM can also be set to use FEC aggressive mode (860T).
	*/
	siu_conf = immr_map(im_siu_conf);
	if ((mfspr(SPRN_IMMR) & 0xffff) == 0x0900) /* MPC885 */
	out_be32(&siu_conf->sc_sdcr, 0x40);
	else
	out_be32(&siu_conf->sc_sdcr, 1);
	immr_unmap(siu_conf);

	cpm_muram_init();
	}

	static DEFINE_SPINLOCK(cmd_lock);

	#define MAX_CR_CMD_LOOPS 10000

	int cpm_command(u32 command, u8 opcode)
	{
	int i, ret;
	unsigned long flags;

	if (command & 0xffffff0f)
	return -EINVAL;

	spin_lock_irqsave(&cmd_lock, flags);

	ret = 0;
	out_be16(&cpmp->cp_cpcr, command \| CPM_CR_FLG \| (opcode << 8));
	for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
	if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
	goto out;

	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
	ret = -EIO;
	out:
	spin_unlock_irqrestore(&cmd_lock, flags);
	return ret;
	}
	EXPORT_SYMBOL(cpm_command);

	/* Set a baud rate generator. This needs lots of work. There are
	* four BRGs, any of which can be wired to any channel.
	* The internal baud rate clock is the system clock divided by 16.
	* This assumes the baudrate is 16x oversampled by the uart.
	*/
	#define BRG_INT_CLK (get_brgfreq())
	#define BRG_UART_CLK (BRG_INT_CLK/16)
	#define BRG_UART_CLK_DIV16 (BRG_UART_CLK/16)

	void
	cpm_setbrg(uint brg, uint rate)
	{
	u32 __iomem *bp;

	/* This is good enough to get SMCs running.....
	*/
	bp = &cpmp->cp_brgc1;
	bp += brg;
	/* The BRG has a 12-bit counter. For really slow baud rates (or
	* really fast processors), we may have to further divide by 16.
	*/
	if (((BRG_UART_CLK / rate) - 1) < 4096)
	out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) \| CPM_BRG_EN);
	else
	out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) \|
	CPM_BRG_EN \| CPM_BRG_DIV16);
	}

	struct cpm_ioport16 {
	__be16 dir, par, odr_sor, dat, intr;
	__be16 res[3];
	};

	struct cpm_ioport32b {
	__be32 dir, par, odr, dat;
	};

	struct cpm_ioport32e {
	__be32 dir, par, sor, odr, dat;
	};

	static void cpm1_set_pin32(int port, int pin, int flags)
	{
	struct cpm_ioport32e __iomem *iop;
	pin = 1 << (31 - pin);

	if (port == CPM_PORTB)
	iop = (struct cpm_ioport32e __iomem *)
	&mpc8xx_immr->im_cpm.cp_pbdir;
	else
	iop = (struct cpm_ioport32e __iomem *)
	&mpc8xx_immr->im_cpm.cp_pedir;

	if (flags & CPM_PIN_OUTPUT)
	setbits32(&iop->dir, pin);
	else
	clrbits32(&iop->dir, pin);

	if (!(flags & CPM_PIN_GPIO))
	setbits32(&iop->par, pin);
	else
	clrbits32(&iop->par, pin);

	if (port == CPM_PORTB) {
	if (flags & CPM_PIN_OPENDRAIN)
	setbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
	else
	clrbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
	}

	if (port == CPM_PORTE) {
	if (flags & CPM_PIN_SECONDARY)
	setbits32(&iop->sor, pin);
	else
	clrbits32(&iop->sor, pin);

	if (flags & CPM_PIN_OPENDRAIN)
	setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
	else
	clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
	}
	}

	static void cpm1_set_pin16(int port, int pin, int flags)
	{
	struct cpm_ioport16 __iomem *iop =
	(struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport;

	pin = 1 << (15 - pin);

	if (port != 0)
	iop += port - 1;

	if (flags & CPM_PIN_OUTPUT)
	setbits16(&iop->dir, pin);
	else
	clrbits16(&iop->dir, pin);

	if (!(flags & CPM_PIN_GPIO))
	setbits16(&iop->par, pin);
	else
	clrbits16(&iop->par, pin);

	if (port == CPM_PORTA) {
	if (flags & CPM_PIN_OPENDRAIN)
	setbits16(&iop->odr_sor, pin);
	else
	clrbits16(&iop->odr_sor, pin);
	}
	if (port == CPM_PORTC) {
	if (flags & CPM_PIN_SECONDARY)
	setbits16(&iop->odr_sor, pin);
	else
	clrbits16(&iop->odr_sor, pin);
	}
	}

	void cpm1_set_pin(enum cpm_port port, int pin, int flags)
	{
	if (port == CPM_PORTB \|\| port == CPM_PORTE)
	cpm1_set_pin32(port, pin, flags);
	else
	cpm1_set_pin16(port, pin, flags);
	}

	int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
	{
	int shift;
	int i, bits = 0;
	u32 __iomem *reg;
	u32 mask = 7;

	u8 clk_map[][3] = {
	{CPM_CLK_SCC1, CPM_BRG1, 0},
	{CPM_CLK_SCC1, CPM_BRG2, 1},
	{CPM_CLK_SCC1, CPM_BRG3, 2},
	{CPM_CLK_SCC1, CPM_BRG4, 3},
	{CPM_CLK_SCC1, CPM_CLK1, 4},
	{CPM_CLK_SCC1, CPM_CLK2, 5},
	{CPM_CLK_SCC1, CPM_CLK3, 6},
	{CPM_CLK_SCC1, CPM_CLK4, 7},

	{CPM_CLK_SCC2, CPM_BRG1, 0},
	{CPM_CLK_SCC2, CPM_BRG2, 1},
	{CPM_CLK_SCC2, CPM_BRG3, 2},
	{CPM_CLK_SCC2, CPM_BRG4, 3},
	{CPM_CLK_SCC2, CPM_CLK1, 4},
	{CPM_CLK_SCC2, CPM_CLK2, 5},
	{CPM_CLK_SCC2, CPM_CLK3, 6},
	{CPM_CLK_SCC2, CPM_CLK4, 7},

	{CPM_CLK_SCC3, CPM_BRG1, 0},
	{CPM_CLK_SCC3, CPM_BRG2, 1},
	{CPM_CLK_SCC3, CPM_BRG3, 2},
	{CPM_CLK_SCC3, CPM_BRG4, 3},
	{CPM_CLK_SCC3, CPM_CLK5, 4},
	{CPM_CLK_SCC3, CPM_CLK6, 5},
	{CPM_CLK_SCC3, CPM_CLK7, 6},
	{CPM_CLK_SCC3, CPM_CLK8, 7},

	{CPM_CLK_SCC4, CPM_BRG1, 0},
	{CPM_CLK_SCC4, CPM_BRG2, 1},
	{CPM_CLK_SCC4, CPM_BRG3, 2},
	{CPM_CLK_SCC4, CPM_BRG4, 3},
	{CPM_CLK_SCC4, CPM_CLK5, 4},
	{CPM_CLK_SCC4, CPM_CLK6, 5},
	{CPM_CLK_SCC4, CPM_CLK7, 6},
	{CPM_CLK_SCC4, CPM_CLK8, 7},

	{CPM_CLK_SMC1, CPM_BRG1, 0},
	{CPM_CLK_SMC1, CPM_BRG2, 1},
	{CPM_CLK_SMC1, CPM_BRG3, 2},
	{CPM_CLK_SMC1, CPM_BRG4, 3},
	{CPM_CLK_SMC1, CPM_CLK1, 4},
	{CPM_CLK_SMC1, CPM_CLK2, 5},
	{CPM_CLK_SMC1, CPM_CLK3, 6},
	{CPM_CLK_SMC1, CPM_CLK4, 7},

	{CPM_CLK_SMC2, CPM_BRG1, 0},
	{CPM_CLK_SMC2, CPM_BRG2, 1},
	{CPM_CLK_SMC2, CPM_BRG3, 2},
	{CPM_CLK_SMC2, CPM_BRG4, 3},
	{CPM_CLK_SMC2, CPM_CLK5, 4},
	{CPM_CLK_SMC2, CPM_CLK6, 5},
	{CPM_CLK_SMC2, CPM_CLK7, 6},
	{CPM_CLK_SMC2, CPM_CLK8, 7},
	};

	switch (target) {
	case CPM_CLK_SCC1:
	reg = &mpc8xx_immr->im_cpm.cp_sicr;
	shift = 0;
	break;

	case CPM_CLK_SCC2:
	reg = &mpc8xx_immr->im_cpm.cp_sicr;
	shift = 8;
	break;

	case CPM_CLK_SCC3:
	reg = &mpc8xx_immr->im_cpm.cp_sicr;
	shift = 16;
	break;

	case CPM_CLK_SCC4:
	reg = &mpc8xx_immr->im_cpm.cp_sicr;
	shift = 24;
	break;

	case CPM_CLK_SMC1:
	reg = &mpc8xx_immr->im_cpm.cp_simode;
	shift = 12;
	break;

	case CPM_CLK_SMC2:
	reg = &mpc8xx_immr->im_cpm.cp_simode;
	shift = 28;
	break;

	default:
	printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n");
	return -EINVAL;
	}

	for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
	if (clk_map[i][0] == target && clk_map[i][1] == clock) {
	bits = clk_map[i][2];
	break;
	}
	}

	if (i == ARRAY_SIZE(clk_map)) {
	printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n");
	return -EINVAL;
	}

	bits <<= shift;
	mask <<= shift;

	if (reg == &mpc8xx_immr->im_cpm.cp_sicr) {
	if (mode == CPM_CLK_RTX) {
	bits \|= bits << 3;
	mask \|= mask << 3;
	} else if (mode == CPM_CLK_RX) {
	bits <<= 3;
	mask <<= 3;
	}
	}

	out_be32(reg, (in_be32(reg) & ~mask) \| bits);

	return 0;
	}

	/*
	* GPIO LIB API implementation
	*/
	#ifdef CONFIG_8xx_GPIO

	struct cpm1_gpio16_chip {
	struct of_mm_gpio_chip mm_gc;
	spinlock_t lock;

	/* shadowed data register to clear/set bits safely */
	u16 cpdata;
	};

	static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
	{
	struct cpm1_gpio16_chip *cpm1_gc =
	container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
	struct cpm_ioport16 __iomem *iop = mm_gc->regs;

	cpm1_gc->cpdata = in_be16(&iop->dat);
	}

	static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
	{
	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
	u16 pin_mask;

	pin_mask = 1 << (15 - gpio);

	return !!(in_be16(&iop->dat) & pin_mask);
	}

	static void __cpm1_gpio16_set(struct of_mm_gpio_chip *mm_gc, u16 pin_mask,
	int value)
	{
	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
	struct cpm_ioport16 __iomem *iop = mm_gc->regs;

	if (value)
	cpm1_gc->cpdata \|= pin_mask;
	else
	cpm1_gc->cpdata &= ~pin_mask;

	out_be16(&iop->dat, cpm1_gc->cpdata);
	}

	static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
	{
	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
	unsigned long flags;
	u16 pin_mask = 1 << (15 - gpio);

	spin_lock_irqsave(&cpm1_gc->lock, flags);

	__cpm1_gpio16_set(mm_gc, pin_mask, value);

	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
	}

	static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
	{
	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
	unsigned long flags;
	u16 pin_mask = 1 << (15 - gpio);

	spin_lock_irqsave(&cpm1_gc->lock, flags);

	setbits16(&iop->dir, pin_mask);
	__cpm1_gpio16_set(mm_gc, pin_mask, val);

	spin_unlock_irqrestore(&cpm1_gc->lock, flags);

	return 0;
	}

	static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
	{
	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
	unsigned long flags;
	u16 pin_mask = 1 << (15 - gpio);

	spin_lock_irqsave(&cpm1_gc->lock, flags);

	clrbits16(&iop->dir, pin_mask);

	spin_unlock_irqrestore(&cpm1_gc->lock, flags);

	return 0;
	}

	int cpm1_gpiochip_add16(struct device_node *np)
	{
	struct cpm1_gpio16_chip *cpm1_gc;
	struct of_mm_gpio_chip *mm_gc;
	struct gpio_chip *gc;

	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
	if (!cpm1_gc)
	return -ENOMEM;

	spin_lock_init(&cpm1_gc->lock);

	mm_gc = &cpm1_gc->mm_gc;
	gc = &mm_gc->gc;

	mm_gc->save_regs = cpm1_gpio16_save_regs;
	gc->ngpio = 16;
	gc->direction_input = cpm1_gpio16_dir_in;
	gc->direction_output = cpm1_gpio16_dir_out;
	gc->get = cpm1_gpio16_get;
	gc->set = cpm1_gpio16_set;

	return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
	}

	struct cpm1_gpio32_chip {
	struct of_mm_gpio_chip mm_gc;
	spinlock_t lock;

	/* shadowed data register to clear/set bits safely */
	u32 cpdata;
	};

	static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
	{
	struct cpm1_gpio32_chip *cpm1_gc =
	container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
	struct cpm_ioport32b __iomem *iop = mm_gc->regs;

	cpm1_gc->cpdata = in_be32(&iop->dat);
	}

	static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
	{
	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
	u32 pin_mask;

	pin_mask = 1 << (31 - gpio);

	return !!(in_be32(&iop->dat) & pin_mask);
	}

	static void __cpm1_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
	int value)
	{
	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
	struct cpm_ioport32b __iomem *iop = mm_gc->regs;

	if (value)
	cpm1_gc->cpdata \|= pin_mask;
	else
	cpm1_gc->cpdata &= ~pin_mask;

	out_be32(&iop->dat, cpm1_gc->cpdata);
	}

	static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
	{
	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
	unsigned long flags;
	u32 pin_mask = 1 << (31 - gpio);

	spin_lock_irqsave(&cpm1_gc->lock, flags);

	__cpm1_gpio32_set(mm_gc, pin_mask, value);

	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
	}

	static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
	{
	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
	unsigned long flags;
	u32 pin_mask = 1 << (31 - gpio);

	spin_lock_irqsave(&cpm1_gc->lock, flags);

	setbits32(&iop->dir, pin_mask);
	__cpm1_gpio32_set(mm_gc, pin_mask, val);

	spin_unlock_irqrestore(&cpm1_gc->lock, flags);

	return 0;
	}

	static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
	{
	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
	unsigned long flags;
	u32 pin_mask = 1 << (31 - gpio);

	spin_lock_irqsave(&cpm1_gc->lock, flags);

	clrbits32(&iop->dir, pin_mask);

	spin_unlock_irqrestore(&cpm1_gc->lock, flags);

	return 0;
	}

	int cpm1_gpiochip_add32(struct device_node *np)
	{
	struct cpm1_gpio32_chip *cpm1_gc;
	struct of_mm_gpio_chip *mm_gc;
	struct gpio_chip *gc;

	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
	if (!cpm1_gc)
	return -ENOMEM;

	spin_lock_init(&cpm1_gc->lock);

	mm_gc = &cpm1_gc->mm_gc;
	gc = &mm_gc->gc;

	mm_gc->save_regs = cpm1_gpio32_save_regs;
	gc->ngpio = 32;
	gc->direction_input = cpm1_gpio32_dir_in;
	gc->direction_output = cpm1_gpio32_dir_out;
	gc->get = cpm1_gpio32_get;
	gc->set = cpm1_gpio32_set;

	return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
	}

	static int cpm_init_par_io(void)
	{
	struct device_node *np;

	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a")
	cpm1_gpiochip_add16(np);

	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b")
	cpm1_gpiochip_add32(np);

	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c")
	cpm1_gpiochip_add16(np);

	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d")
	cpm1_gpiochip_add16(np);

	/* Port E uses CPM2 layout */
	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e")
	cpm2_gpiochip_add32(np);
	return 0;
	}
	arch_initcall(cpm_init_par_io);

	#endif /* CONFIG_8xx_GPIO */